1) STEEL BAR 60MM DIA TO SPECIFICATION TU-14-1-1637-76 TO GRADE : BAR OF ALLOY KHISK60V14N11 (EP131)[03]()
Specification : AS PER SPECIFICATION
R
Nonestab
2) STEEL ROD DIA 55 MM X L1250 TO SPECN. OST 3-98-80 GRADE OF STEEL 30KHRA[03]()
Specification : AS PER SPECIFICATION
R
Nonestab
3) S S RODS BRIGHT GRADE AISI 316 SIZE 5 MM DIA 1000 MML[71]()
Specification : S S RODS BRIGHT GRADE AISI 316 SIZE 5 MM DIA 1000 MML
C
Nonestab
4) S S RODS DRIGHT GRADE AISI 316 SIZE 18 MM DIA 500 MML[71]()
Specification : S S RODS DRIGHT GRADE AISI 316 SIZE 18 MM DIA- 500 MML
C
Nonestab
5) Al alloy extruded rod 60 mm dia x multiple length of 555 mm with pggg 4 mm on radius to specn EN 755 2 AW AL 6082 IN T6 CONDITION[06]()
Specification : AS PER SPEC
R
Nonestab
6) S S SEAMLESS PIPE GRADE AISI 316 SIZE 127MM ODX 95 MM ID X900 MML[71]()
Specification : S S SEAMLESS PIPE GRADE AISI 316 SIZE 127MM ODX 95 MM ID X900 MML
R
Nonestab
7) STAINLESS STEEL ROUND GRADE AISI 316 SIZE 130 MM OD X 130MM LONG OR ITS MULTIPLE[01]()
Specification : STAINLESS STEEL ROUND GRADE AISI 316 SIZE 130 MM OD X 130MM LONG OR ITS MULTIPLE
R
Nonestab
Category : s
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN.IS:737 DESGN-24345 IN 'T6' CONDITION.SIZE: 3.5 +0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH.[00]()
Specification : COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN.IS:737 DESGN-24345 IN 'T6' CONDITION.SIZE: 3.5 +0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH
R
Estab
2) CARBON STEEL BRIGHT ROUNDS TO SPECN BS 970 PT I 1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10 PERCENTAGE SHORTS DOWN TO 2 TO 3 METRES SIZE 35 MM DIA[00]()
Specification : CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.
R
Estab
3) COLD ROLLED ALUMINIUM ALLOY SHEET TO SPECN IS 736 LATEST ISSUE GRADE 65032 IN M CONDITION SIZE 9 POINT 5 THICK X 914 MM WIDE X 2438 MM LONG[00]()
Specification : COLD ROLLED ALUMINIUM ALLOY SHEET TO SPECN. IS:736(LATEST ISSUE) GRADE 65032 IN "M" CONDITION (TEST PIECE TO BE TESTED IN "WP" CONDITION) MATERIAL SHOULD BE CAPABLE FOR FLOW TURNING.SIZE:-9.5 +/- 0.2MM THICK X 914MM WIDE X 2438MM LONG.
R
Estab
4) EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN DTD 5124 LATEST ISSUE IN T6 CONDITION HAVING STRAIGHTNESS OF 0 POINT 4 MM CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0 POINT 5 MM SIZE 70 MM[00]()
Specification : EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG
R
Estab
5) LEADED BRASS ROUND TO SPECN BS 2874 LATEST ISSUE GR CZ 121PB 3 IN M CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 3 POINT 658 MINUS 0 POINT 05 MM DIA[00]()
Specification : LEADED BRASS ROUND TO SPECN.BS:2874 (LATEST ISSUE) GR.CZ-121PB 3 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE: 3.658 -0.05 MM DIA
R
Estab
6) HOT ROLLED AND COLD DRAWN CARBON STEEL ROUND TO SPECN BS 970 PT I 1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTR SIZE 7 POINT 5 MM DIA[00]()
Specification : HOT ROLLED AND COLD DRAWN CARBON STEEL ROUND TO SPECN.BS:970 PT.I-1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTR. WITH 10% SHORTS DOWN TO 2 - 3 METRES SIZE: 7.5 - 0.05 MM DIA.
R
Estab
7) BRASS ROUNDS TO SPECN BS 2874 1986 GRADE CZ 121 PB3 IN M CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES SIZE 3 PLUS OR MINUS 0 POINT 04 MM DIA[00]()
Specification : BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN "M"CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE:- 3.00 +/- 0.04 MM DIA.
R
Estab
8) CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED AND HEAT TREATED TO CONDITION R TO SPECN BS970 PART I 1983 GRADE 410S21 EN56A SIZE 7 MINUS 0 POINT 08 MM DIA[00]()
Specification : CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN. BS970 (PART-I)1983 GRADE 410S21 (EN56A) WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 -
R
Estab
9) CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND TO SPECN BS 970 PT I 1983 GR 070M20 HAVING STRAIGHT LENGTH OF 3 MTRS SIZE 25 POINT 4 MINUS 0 POINT 1 MM DIA[00]()
Specification : CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA
R
Estab
10) BRIGHT FINISHED CHROMIUM RUST RESISTING STEEL ROUNDS TO SPECN BS 970 PT I 1983 GRADE 410S21 HEAT TREATED TO R CONDITION HAVING STRAIGHT LENGTH OF 3 MTRS SIZE 5 POINT 5 MINUS 0 POINT 08 MM DIA[00]()
Specification : BRIGHT FINISHED CHROMIUM RUST RESISTING STEEL ROUNDS TOSPECN.BS:970 PT.I/1983 GRADE 410S21 HEAT TREATED TO "R"CONDITION HAVING STRAIGHT LENGTH OF 3 MTRS.WITH 10% SHORTS DOWN TO 2-3 MTRS SIZE : 5.5 -0.08 MM DIA.
R
Estab
11) BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUNDS TO SPECN BS 970 1983 GRADE 070M20 IN NORMALISED CONDITION STRAIGHT LENGTH OF 3 METERS SIZE 19 MINUS 0 POINT 08 MM DIA[00]()
Specification : BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUNDS TO SPECN:BS: 970-1983 GRADE 070M20 IN NORMALISED CONDITION STRAIGHT LENGTH OF 3 METERS SIZE 19.00 - 0.08 MM DIA
R
Estab
12) STEEL GROUND ROUND BARS TO SPECN BS 970 1983 GRADE 070M20IN NORMALISED CONDITION IN STRAIGHT LENGTH OF 2 TO 3 METERS TO SIZE 19 MINUS 0 POINT 052 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0 POINT 3 MM PER MTR[00]()
Specification : STEEL GROUND ROUND BARS TO SPECN: BS:970-1983 GRADE 070M20IN NORMALISED CONDITION IN STRAIGHT LENGTH OF 2 TO 3 METERSTO SIZE:19.00 -0.052 MM DIA HAVING STRAIGHTNESS LESS THANOR EQUAL TO 0.3 MM/MTR
R
Estab
13) ALUMINIUM ALLOY CIRCULAR DISC MFD FROM COLD ROLLED PLATE TO SPECN IS 736 1986 REF 2001 65032 IN W or WP COND OR BS 1470 HS 20 OR HS 30 IN W or WP COND SIZE 150 MM DIA X 9 POINT 52 MM THICK[00]()
Specification : ALUMINIUM ALLOY CIRCULAR DISC (MFD. FROM COLD ROLLED PLATE) TO SPECN.IS:736-1986(REF.2001)65032 IN W or WP COND.OR BS:1470 HS-20 OR HS-30 IN W or WP COND.TEST PIECE SHALL BE TESTEDIN "WP CONDITION. MATERIAL SHOULD BE ABLE TO GET FLOW-TUR
R
Estab
14) ALUMINIUM ALLOY ROUND BAR TO SPECIFICATION BS 1474 1987GRADE 2014 A IN T6 CONDITION PERIPHERIAL GRAIN GROWTH OF MAXIMUM 3 MM ON RADIUS TO SIZE 28 MM PLUS OR MINUS 0 POINT 32 MM[00]()
Specification : ALUMINIUM ALLOY ROUND BAR TO SPECIFICATION BS:1474:1987GRADE 2014 A IN T6 CONDITION HAVING STRAIGHT LENGTH OF 2 TO2.5 METRES AND PERIPHERIAL GRAIN GROWTH OF MAXIMUM 3.00 MMON RADIUS TO SIZE: 28 MM +/- 0.32 MM.
R
Estab
15) ALUMINIUM ALLOY ROD WITHOUT PERIPHERAL GRAIN GROWTH TOSPECBS 1474 HE 15 IN TF CONDITION HAVING STRAIGHT LENGTH OF 2 TO 2 POINT 5 METRES SIZE 23 POINT 50 MINUS 0 POINT 052 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0 POINT 3 MM PER MTR[00]()
Specification : ALUMINIUM ALLOY ROD WITHOUT PERIPHERAL GRAIN GROWTH TO SPECIFICATION BS:1474 HE-15 IN TF CONDITION HAVING STRAIGHT LENGTH OF 2 TO 2.5 METRES SIZE:23.50 -0.052 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR
R
Estab
16) ALUMINIUM STRIP TO SPECN BS 1470 GR S 1B IN O CONDITION IN COIL FORM SIZE 0 POINT 3 PLUS 0 POINT 03 OR MINUS 0 POINT 05 MM THICK X 40 PLUS OR MINUS 0 POINT 2 MM WIDE[00]()
Specification : ALUMINIUM STRIP TO SPECN. BS: 1470 GR. S 1B IN "O" CONDITIONIN COIL FORM, SIZE:- 0.3 + 0.03/- 0.05 MM THICK X 40 +/- 0.2 MM WIDE.
R
Estab
17) CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN BS 970 PT 1 1983 GRADE 080M40 IN R CONDITION HAVING MINIMUM UTS OF 696MPA HARDNESS 200 TO 250 VPN SIZE 19 PLUS OR MINUS 1 MM DIA[00]()
Specification : CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN. BS-970(PT-1) 1983 GRADE 080M40 IN "R"CONDITION HAVING MINIMUM UTS OF 696MPA,HARDNESS 200 TO 250 VPN IN STRAIGHT LENGTH OF 2 TO 3 MTRWITH 10% SHORTS DOWN TO 1.5 METRES SIZE: 19.00 +/- 1 MM DI
R
Estab
18) NI CR MO STEEL ROUNDS TO SPECN BS 970 PT 2 LATEST ISSUE GRADE 817M40 IN X CONDITION HAVING STRAIGHT LENGTH OF 3 TO 4 METRES SIZE 10 POINT 5 MM DIA[00]()
Specification : NI-CR-MO STEEL ROUNDS TO SPECN. BS:970-PT.2(LATEST ISSUE) GRADE 817M40 IN "X" CONDITION HAVING STRAIGHT LENGTH OF 3 TO4 METRES, SIZE:- 10.5 MM DIA.
R
Estab
19) BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 340 TO 390 BHN TOSPECN BS 970 EN 56 HARDENED AND TEMPERED TO X CONDITION OR BS 970 EN 25 OR EN 24 HARDENED AND TEMPERED TO X CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES SIZE 11 MINUS 0 POINT 05 MM DIA[00]()
Specification : BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 340 TO 390 BHN TO SPECN BS 970 EN-56 HARDENED AND TEMPERED TO X CONDITION ORBS:970 EN-25 OR EN-24 HARDENED AND TEMPERED TO X CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES. SIZE: 11 -0.05 MM D
R
Estab
20) BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 200 TO 250 VPN TOSPECN BS970 EN 56 HARDENED AND TEMPERED TO R COND OR BS970 EN57 HAVING ST LENGTH OF 2 TO 3 METRES SIZE 3 POINT 5 MINUS 0 POINT 05 MM DIA[00]()
Specification : BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 200 TO 250 VPN TOSPECN.BS:970 EN-56 HARDENED AND TEMPERED TO R CONDITION ORBS:970 EN-57 HAVING ST.LENGTH OF 2 TO 3 METRES. SIZE: 3.5 -0.05 MM DIA
R
Estab
21) ALUMINIUM ALLOY STRIP TO BS 1470 HS 14 OR HS 15 CONDITION W OR BS 1470 NS 4 1 BY 2 H OR NS 5 1BY4 H SIZE 0 POINT 5 PLUS 0 POINT 03 MM THICKNESS X 22 MM WIDE IN COIL FORM[00]()
Specification : ALUMINIUM ALLOY STRIP TO BS 1470- HS 14 OR HS 15 CONDITION W OR BS 1470 NS 4-1/2 H OR NS 5-1/4 H SIZE: 0.5 + 0.03 MMTHICKNESS X 22 MM WIDE IN COIL FORM.
R
Estab
22) ALUMINIUM ALLOY ROUND TO SPECN IS 733 24345 W OR WP CONDN OR SPECN BS 1474 GRADE 2014 A SIZE 8 PLUS OR MINUS 0 POINT 05 MM DIA[00]()
Specification : ALUMINIUM ALLOY ROUND TO SPECN.IS-733-24345 W OR WP CONDN. OR SPECN.BS:1474 GRADE 2014 A SIZE : 8.00+/-0.05 MM DIA
R
Estab
23) ALUMINIUM ALLOY ROUNDS TO SPECN BS 1474 1972 NE 4 HAVING STRAIGHT LENGTH OF 3 TO 4 METRES SIZE 8 POINT 5 PLUS 0 POINT 05 MINUS 0 POINT 10 MM DIA[00]()
Specification : ALUMINIUM ALLOY ROUNDS TO SPECN:BS 1474-1972 NE-4 HAVINGSTRAIGHT LENGTH OF 3 TO 4 METRES SIZE 8.5+0.05/-0.10 MM DIA
R
Estab
24) ALUMINIUM ALLOY ROUNDS TO SPECN BS 1474 1972 NE 4 HAVING STRAIGHT LENGTH OF 2 TO 3 METRES SIZE 14 PLUS 0 POINT 05 MINUS 0 POINT 10 MM DIA[00]()
Specification : ALUMINIUM ALLOY ROUNDS TO SPECN: BS 1474-1972 NE-4HAVING STRAIGHT LENGTH OF 2 TO3 METRES SIZE: 14+0.05/-0.10 MM DIA.
R
Estab
25) CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN BS970 PART1 1983 GRADE 080M40 TO R CONDITION WITH MINIMUM UTS 686 MPA AND IN STRAIGHT LENGTH OF 3 TO 4 METRES SIZE 4 MINUS 0 POINT 08 MM DIA[00]()
Specification : CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN. BS970(PART1) 1983 GRADE 080M40 TO "R" CONDITION WITH MINIMUM UTS 686 MPAAND IN STRAIGHT LENGTH OF 3 TO 4 METRESSIZE: 4.00 - 0.08 MM DIA
R
Estab
26) BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 250 TO 300 VPN TOSPECN BS 970 EN 56D HARDENED AND TEMPERED TO T CONDITION OR BS 970 EN 57 OR EN 58 HAVING ST LENGTH OF 2 TO 3 METRES SIZE 10 MINUS 0 POINT 05 MM DIA[00]()
Specification : BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 250 TO 300 VPN TOSPECN.BS:970 EN-56D HARDENED AND TEMPERED TO T CONDITIONOR BS:970 EN-57 OR EN-58 HAVING ST.LENGTH OF 2 TO 3 METRESSIZE: 10 -0.05 MM DIA
R
Estab
27) COPPER TUBE TO SPECN GOST B17646 78 GR M2 IN COLD DRAWN COND SIZE 35 PLUS OR MINUS 0 POINT 15 MM OD X 2 POINT 5 PLUS OR MINUS 0 POINT 25MM[00]()
Specification : COPPER TUBE TO SPECN.GOST B17646-78, GR.M2 IN COLD DRAWNCOND.HAVING STRAIGHT LENGTH 2-3M.MECH.PROPERTIES IN SOFTCOND.AS PER GOST B17646-78,GR.M2 AND CHEMICAL PROPERTIES ASPER GOST 859-78,GR.M2, SIZE:35.00+/-0.15MM O/DX2.5 +/-0.25MMW/T. (G
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) COPPER STRIP TO SPECN IS 14811 2000 CONDITION HD GRADE CU CATH MINUS 2 TO SPECN IS 191 2007 SIZE 0 POINT 18 MM THICK 22 MM WIDE[00]()
Specification : COPPER STRIP TO SPECN.IS:14811:2000.CONDITION HD GRADE CU CATH - 2 TO SPECN IS:191-2007 SIZE:-0.18-0.02 MM THICK X 22 + 0.5 MM WIDE.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) COLD ROLLED ALUMINIUM ALLOY SHEETS TO OFAJ SPECN CC 388 SIZE 10 point 3 plus 0 point 2 0 point 1 MM THICK X 915 MM WIDE X 1730 MM LONG[00]()
Specification : COLD ROLLED ALUMINIUM ALLOY SHEETS TO OFAJ SPECN. CC-388, SIZE: 10.3 + 0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG.
R
Estab
2) 25 MM plus 0 point 2 point 1 MM THICK X 915 MM WIDE X 1730 MM LONG ROLLED ALUMINIUM ALLOY SHEET TO SPECIFICATION A US SPECN GR AA 6082 IN M CONDITION OR B BS 1474 1987GR 6082 IN F CONDITION OR C IS 736 1986 GR 64430 IN M CONDITION[00]()
Specification : 25 MM +0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG ROLLED ALUMINIUM ALLOY SHEET TO SPECIFICATION (A) US SPECN. GR-AA 6082 IN "M" CONDITION OR (B) BS 1474 - 1987, GR-6082 IN "F" CONDITION OR (C) IS 736-1986, GR-64430 IN "M" CONDITION
R
Estab
3) OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100 MM X THICKNESS 14 plus 0 point 1MM X 1440MM LONG APPROX[00]()
Specification : OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100MM X THICKNESS 14 +0.1MM X 1440MM LONG (APPROX)
R
Estab
4) COPPER STRIP TO SPECN EN 13604 CW009A HAVING STRAIGHT LENGTH OF 2 point 5 TO 3 MTS SIZE 64 plus 1 MM WIDE X 4 plus 0 point 1 MM THICK[00]()
Specification : COPPER STRIP TO SPECN. EN 13604-CW009A HAVING STRAIGHT LENGTH OF 2.5 TO 3 MTS. SIZE:64 +/-1 MM WIDE X 4 +0.1 MM THICK
R
Estab
5) ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY MATERIAL SPECIFICATION IS 1285 2002 GRADE 64430 IN F CONDITION DIMENSION and TOLERANCE AS PER 2673 002[00]()
Specification : ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002.
R
Estab
6) AL ALLOY TUBE TO OFAJ DRAWING NO SK 1410 FOR ILLU SHELL BODY[00]()
Specification : AL.ALLOY TUBE TO OFAJ DRAWING NO.SK-1410 FOR ILLU SHELL BODY
R
Estab
7) DEOXIDISED COPPER TUBE TO SPECN JSS 4710 1 LATEST ISSUE IN AS EXTRUDED AND DRAWN CONDITION SIZE 83 point 7 I D X 4 point 5 plus 1point 5 MM X 300 MM LONG[00]()
Specification : DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG.
R
Estab
8) ALUMINIUM ALLOY ROUND BAR TO SPECN IS 733 1983 GR 24345 IN WP 8 percent MIN ELONGATION HAVING STRAIGHT LENGTH OF 2 TO 2 point 5 METRES SIZE 20 MM DIA AND GRAIN GROWTH OF MAXIMUM 2 point 5 MM ON RADIUS[00]()
Specification : ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" 8% MIN ELONGATION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 20 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS
R
Estab
9) AL ALLOY ROUND BAR 20 MM DIA 0 point 05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0 point 3 MM per MTR LENGTH[00]()
Specification : AL.ALLOY ROUND BAR 20 MM DIA -0.05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR LENGTH
R
Estab
10) ALUMINIUM ALLOY ROUND BAR TO SPECN IS 733 1983 GR 24345 IN WP OR BS 1474 1987 GRADE 2014 A IN T6 CONDITION HAVING STRAIGHT LENGTH OF 2 TO 2 point 5 METRES SIZE 21 MM DIA AND GRAIN GROWTH OF MAXIMUM 2point 5 MM ON RADIUS[00]()
Specification : ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" OR BS-1474 1987 GRADE 2014 A IN T6 CONDITION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 21 +/-0.25 MM DIA.AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS.
R
Estab
11) EXTRUDED AND DRAWN AL ALLOY TUBE TO SPECN BS 1474 1987 GR 6082 IN F CONDTO SIZE ID 67 MM O D 91MM WITH 3MM PGG ON RADIUS HAVING STRAIGHT LENGTH OF 1to3 MTR ONLY ON THE TEST PIECE SHOULD BE HEAT TREATED TO T6 COND and TESTED[00]()
Specification : EXTRUDED AND DRAWN AL.ALLOY TUBE TO SPECN.BS:1474-1987 GR. 6082 IN F COND.TO SIZE ID 67.00 MM +/-0.50 MM & O/D 91MM +/- 0.9MM WITH 3MM PGG ON RADIUS HAVING STRAIGHT LENGTH OF 1to3 MTR.ONLY ON THE TEST PIECE SHOULD BE HEAT TREATED TO T6 C
R
Estab
12) ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 68 MM FOR STABILIZING TUBE MATERIAL SPECIFICATION IS 1285 2002 GRADE 64430 IN F CONDITION DIMENSION and TOLERANCE AS PER 2673 2002[00]()
Specification : ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 68 MM FOR STABILIZING TUBE, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002
R
Estab
13) AL ALLOY TUBE TO OFAJ DRAWING NO SK 1409 FOR STABILIZING TUBE[00]()
Specification : AL ALLOY TUBE TO OFAJ DRAWING NO.SK-1409 FOR STABILIZING TUBE
R
Estab
14) GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088 3 1 POINT 4523 PLUSQT SIZE 11 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES[00]()
Specification : GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4523+QT SIZE:- 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.
R
Estab
15) GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088 3 1 POINT 4305 AT SIZE 11 MM IN STRAIGHT LENGTH OF 2 TO 3 METRES[00]()
Specification : GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4305-AT SIZE: 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.
R
Estab
16) GROUND STAINLESS STEEL ROD TO SPECIFICATION BS 970 PT1 1983 GRADE 303S31 SIZE 8 MM 0 POINT 07 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES[00]()
Specification : GROUND STAINLESS STEEL ROD TO SPECIFICATION BS 970:PT-1:1983 GRADE 303S31 SIZE:- 8 MM -0.07 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) BRASS STRIP TO SPECIFICATION BS EN 1652 1998 DESIGN CUZN37MATERIAL CONDITION R550 WITH UTS 55 TO 65 KGF PER MM2 ELONGATION 4 PERCENTAGE MIN TO SIZE 0 POINT 6 MINUS 0 POINT 06MM THICK X 12 MM WIDE IN COIL FORM REF DRG NO BW8 388 004[00]()
Specification : BRASS STRIP TO SPECIFICATION BS EN 1652-1998 DESIGN CUZN37MATERIAL CONDITION R550 WITH UTS 55-65 KGF/MM2,ELONGATION 4%MIN. TO SIZE 0.6 - 0.06MM THICK X 12 MM WIDE IN COIL FORM(REF.DRG.NO.BW8.388.004)
R
Estab
2) ALUMINIUM ALLOY ROUND BAR SIZE 21 MM DIA SPECN IS 733 1983 REAFFIRMED 2006 GR 24345 IN WP[00]()
Specification : ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 REAFFIRMED 2006 GR.24345 IN "WP" HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 21 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS
R
Estab
3) STEEL BAR TO SPECN NO IS 4431 78 DESIGNATION 14C 14S14 COLD DRAWN IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22 MM DIA[00]()
Specification : STEEL BAR TO SPECN.NO.IS:4431-78 DESIGNATION 14C 14S14 (C/D) IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE 22 -0.052 MM DIA
R
Estab
4) COPPER STRIP TO SPECN IS 14811 2000 CONDITION HD GRADE CU CATH MINUS 2 TO SPECN IS 191 2007 SIZE 0 POINT 18 MM THICK 22 MM WIDE[00]()
Specification : COPPER STRIP TO SPECN.IS:14811:2000.CONDITION HD GRADE CU CATH - 2 TO SPECN IS:191-2007 SIZE:-0.18-0.02 MM THICK X 22 + 0.5 MM WIDE.
R
Estab
5) BRASS STRIP TO SPECIFICATION BS EN 1652 TO 1998 DESIGN CUZN39PB2 MATERIAL CONDITION R420 WITH UTS 42 TO 50 KGF PER MM2 SIZE 1 MM THICK 10 MM WIDE IN COIL FORM[00]()
Specification : BRASS STRIP TO SPECIFICATION BS EN1652-1998 DESIGN CUZN39PB2 MATERIAL CONDITION R420 WITH UTS 42-50 KGF/MM2, AND ELONGATION 18% MIN.TO SIZE 1.0 - 0.10MM THICK X 10 MM WIDE IN COIL FORM (REF.DRG.NO.BW8.264.006 FOR SLIDER)
R
Estab
6) ALUMINIUM ALLOY ROD TO SPECN IS 733 REAFFERMED 2006 GR 24345 IN WP COND SIZE 14 MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1 POINT 5 METERS AND 1 MM MAXIMUM PGG ON RADIUS[00]()
Specification : ALUMINIUM ALLOY ROD TO SPECN.IS:733 REAFFERMED 2006 GR.24345 IN WP COND.SIZE:14 +/- 0.1 MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1.5 METERS AND 1 MM MAXIMUM PGG ON RADIUS
R
Estab
7) STEEL STRIP TO SPECIFICATION IS 513 2008 GRADE CR3 OR GRADE 1CS OF BS 1449 SECTION 1 1 1991 TO SIZE 0 POINT 1 MM THICK 20MM WIDE IN COIL FORM[00]()
Specification : STEEL STRIP TO SPECIFICATION IS:513-2008 GRADE CR3 OR GRADE 1CS OF BS:1449 SECTION 1.1:1991 TO SIZE 0.1 -0.02MM THICK X 20MM WIDE IN COIL FORM (REF.DRG.NO.BW8.635.085 FOR CAP)
R
Estab
8) ALUMINIUM ALLOY ROD TO SPECN IS 733 1983 REAFFERMED 2006 GR 24345 IN WP COND SIZE 10 MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1 POINT 5 METERS[00]()
Specification : ALUMINIUM ALLOY ROD TO SPECN.IS:733-1983 REAFFERMED 2006 GR. 24345 IN WP COND. WITH MECH.PROPERTIES RM-40 KGF/SQ.MM(MIN) RP 0.2-28 KGF/SQ.MM (MIN) A5-10 MIN SIZE:10 +/- 0.1MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1.5 METERS AND 1MM MAXIMU
R
Estab
9) STEEL WIRE TO GRADE 14C14S14 TO SPECN IS 4431 TO 1978 REFF 2004 IN COLD DRAWN CONDITION SIZE 3 POINT 5 MM DIA[00]()
Specification : STEEL WIRE TO GRADE 14C14S14 TO SPECN IS 4431 TO 1978 REFF 2004 IN COLD DRAWN CONDITION SIZE 3 POINT 5 MM DIA
R
Estab
10) MILD STEEL ROD TO SPECN IS 1875 TO 1992 REAFFIRMED GRADE 20C8 IN STRAIGHT LENGTH OF 2 TO 3 METRS SIZE 7 MM DIA[00]()
Specification : MILD STEEL ROD TO SPECN.IS:1875-1992 (REAFFIRMED)GRADE 20C8, IN STRAIGHT LENGTH OF 2 TO 3 METRS SIZE: 7.00+0.025/-0.075 MM DIA.
R
Estab
11) BRASS ROUND TO SPECN BSEN 12166 TO 1998 desig CuZn39Pb2 IN COLD WORKED AND STRESS RELIEVED CONDITION WITH UTS 50 TO 65 KGF PER MM SQ SIZE 4 POINT 5 MM DIA[00]()
Specification : BRASS ROUND TO SPECN.BSEN 12166-1998 desig CuZn39Pb2 IN COLD WORKED AND STRESS RELIEVED CONDITION WITH UTS 50 TO 65 KGF/M M SQ. AND ELONGATION 5% Min. IN STRAIGHT LENGTH OF 2 TO 3 METRES SIZE:4.5+/-0.05 MM DIA.
R
Estab
12) ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 TO 1983 GRADE 24345 OR BS 1474 TO 1987 GR 2014A IN COLD DRAWN CONDITION HAVING STRAIGHT LENGTH OF 1 POINT 5 METRES MINIMUM SIZE 10 MM DIA[00]()
Specification : ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 GRADE 24345 OR BS:1474-1987 GR.2014A IN COLD DRAWN CONITION HAVING STRAIGHT LENGTH OF 1.5 METRES MINIMUM, SIZE:- 10 +/- 0.2 MM DIA
R
Estab
13) COLD DRAWN CARBON STEEL ROUND BAR TO SPECN IS 4431 78 DESIGN 14C14S14 COLD DRAWN IN STRAIGHT LENGTH OF 2 POINT 5 METRES MIN SIZE 15 MM DIA[00]()
Specification : COLD DRAWN CARBON STEEL ROUND BAR TO SPECN.IS:4431 78 DESIGN 14C14S14 (C/D) IN STRAIGHT LENGTH OF 2.5 METRES MIN. SIZE 15.00 + 0.025/-0.075 MM DIA.
R
Estab
14) BRASS ROUND TO SPECN BS EN 12166 1998 DESIGN CUZN35PB2 MATERIAL COND R540 WITH UTS 54 TO 65 KGF PER MM2 SIZE 4 POINT 5 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METERS[00]()
Specification : BRASS ROUND TO SPECN. BS EN 12166:1998 DESIGN. CUZN35PB2 MATERIAL COND. R540 WITH UTS=54-65 KGF/MM2 & ELON = 5% MIN SIZE: 4.5 +/- 0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METERS
R
Estab
15) BRASS ROUND TO SPECN BS EN 12166 1998 DESIGN CUZN35PB2 MATERIAL COND R540 WITH UTS 54 TO 65 KGF PER MM2 SIZE 4 MM DIA IN STRAIGHT LENGTH[00]()
Specification : BRASS ROUND TO SPECN. BS EN 12166:1998 DESIGN. CUZN35PB2 MATERIAL COND. R540 WITH UTS=54-65 KGF/MM2 & ELON = 5% MIN SIZE: 4.0 +/- 0.1 MM DIA IN STRAIGHT LENGTH
R
Estab
16) COPPER STRIP TO SPECN IS 14811 2000 CONDITION HD GRADE Cu CATH 2 TO SPECN IS 191 2007 SIZE 0 point 18 MM THICK 12 point 7 MM WIDE[00]()
Specification : COPPER STRIP TO SPECN.IS:14811:2000.CONDITION HD GRADE Cu CATH - 2 TO SPECN IS:191-2007 SIZE:-0.18-0.02 MM THICK X 12.7 + 0.5 MM WIDE.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006 GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES SIZE 14 point 5 MM DIA WITHOUT PGG[00]()
Specification : ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006 GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE: 14.5 +/- 0.1 MM DIA WITHOUT PGG.
R
Estab
2) EXTRUDED BRASS TUBE TO SPECN BS EN 12451 1999 SYMBOL CuZn30A No CW 707R MATERIAL CONDITION WITH HARDNESS 130 Hv MIN HAVING STRAIGHT LENGTH OF 2 MTRS MIN SIZE 25 point 5 MM O D X 21 point 5 MM I D[00]()
Specification : EXTRUDED BRASS TUBE TO SPECN.BS:EN-12451:1999 SYMBOL CuZn30A No.CW 707R MATERIAL CONDITION WITH HARDNESS 130 Hv MIN HAVING STRAIGHT LENGTH OF 2 MTRS MIN SIZE:- 25.5 +/- 0.15 MM O/D, X 21.5 +/- O.15 MM I/D.
R
Estab
3) HOT ROLLED NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS 970 PT I 1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3 METRES SIZE 23 POINT 50[00]()
Specification : HOT ROLLED, NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN. BS:970-PT.I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3 METRES,SIZE 23.50 -0.052 MM DIA.(10 % MAX.SHORT LENGTH OF 1.5 METRES ALLOWED).
R
Estab
4) ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006 GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES SIZE 12 MM DIA WITHOUT PGG[00]()
Specification : ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006 GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE: 12 +/- 0.1 MM DIA WITHOUT PGG.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) STEEL BAR TO SPECN IS 4431 78 DESIGNATION 14C 14S14 COLD DRAWN IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22[00]()
Specification : STEEL BAR TO SPECN. NO. IS:4431-78 DESIGNATION 14C 14S14 (C/D) IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22-0.052 MM DIA.
R
Estab
2) ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006 GRADE 24345 IN WP CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METERS SIZE 10 MM DIA WITHOUT PGG[00]()
Specification : ALUMINIUM ALLOY ROUNDS TO SPECN. IS:733-1983 REAFFIRMED 2006 GRADE 24345 IN WP CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METERS , SIZE : 10+/-0.1 MM DIA WITHOUT PGG.
R
Estab
3) ALUMINIUM ALLOY ROD TO SPECN IS733 REAFFERMED 2006 GR 24345 IN WP CONDITION SIZE 14 MM DIA[00]()
Specification : ALUMINIUM ALLOY ROD TO SPECN. IS:733 REAFFERMED 2006 GR. 24345 IN WP CONDITION. SIZE: 14 +/-0.1 MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1.5 METERS AND 1 MM MAXIMUM PGG ON RADIUS.
R
Estab
4) BRASS STRIP TO SPECIFICATION BS EN 1652 1998 DESIGN CUZN37MATERIAL CONDITION R550 WITH UTS 55 TO 65 KGF PER MM2 ELONGATION 4 PERCENTAGE MIN TO SIZE 0 POINT 6 MINUS 0 POINT 06MM THICK X 12 MM WIDE IN COIL FORM REF DRG NO BW8 388 004[00]()
Specification : BRASS STRIP TO SPECIFICATION BS EN 1652-1998 DESIGN CUZN37MATERIAL CONDITION R550 WITH UTS 55-65 KGF/MM2,ELONGATION 4%MIN. TO SIZE 0.6 - 0.06MM THICK X 12 MM WIDE IN COIL FORM(REF.DRG.NO.BW8.388.004)
R
Estab
5) ALUMINIUM ALLOY ROUND BAR TO SPECN IS 733 1983 REAFFIRMED 2006 GR24345 IN WP CONDITION HAVING STRAIGHT LENGTH OF 2 TO TWO AND HALF METRES SIZE 21MM DIA AND GRAIN GROWTH OF MAXIMUM TWO AND HALF MM ON RADIUS[00]()
Specification : ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 REAFFIRMED 2006 GR.24345 IN "WP" HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 21 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) HOT ROLLED COLD DRAWN CARBON STEEL ROUNDS TO SPECN BS 970 PT I 1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTRS SIZE 31 MM DIA[00]()
Specification : HOT ROLLED+COLD DRAWN CARBON STEEL ROUNDS TO SPECN. BS:970 PT-I 1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTRS. (15% MAX.SHORTS DOWN FROM 2.0-3.0 MTRS PERMITTED)SIZE:31.00 - 0.062 MM DIA.
R
Estab
2) HOT ROLLED COLD DRAWN CARBON STEEL GROUND ROUND BARS TO SPECN BS 970 PT I 1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 1 5 TO 2 MTRS TO SIZE 31 MM DIA[00]()
Specification : HOT ROLLED+COLD DRAWN CARBON STEEL GROUND ROUND BARS TO SPECN.BS:970 PT-I 1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 1.5 TO 2 MTRS TO SIZE 31.00-0.052 MM DIA HAVING STRAIGHT -NESS LESS THAN OR EQUAL TO 0.3 MM/MTR
R
Estab
3) LEADED BRASS ROUND TO SPECN BS 2874 1986 GR CZ 129 IN M CONDITION HAVING ST LENGTH OF 2 TO 3 METRES SIZE 17 POINT 5 MM DIA[00]()
Specification : LEADED BRASS ROUND TO SPECN.BS-2874-1986 GR.CZ 129 IN"M" CONDITION HAVING ST. LENGTH OF 2 TO 3 METRES. SIZE:17.5 +/-0.05 MM DIA.
R
Estab
4) LEADED BRASS ROUND TO SPECN BS 2874 1986 GR CZ 129 IN M CONDITION HAVING ST LENGTH OF 1 POINT 5 3 METRES SIZE 17 POINT 5 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0 POINT 3 MM PER MTR[00]()
Specification : LEADED BRASS ROUND TO SPECN.BS-2874-1986 GR.CZ 129 IN "M" CONDITION HAVING ST.LENGTH OF 1.5 - 3 METRES SIZE:17.5-0.043 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR
R
Estab
5) LEADED BRASS ROUND TO SPECN BS 2874 1986 GR CZ 129 IN M CONDITION HAVING STRAIGHT LENGTH OF 1 POINT 5 TO 2 MTRS SIZE 14 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0 POINT 3 MM PER MTR[00]()
Specification : LEADED BRASS ROUND TO SPECN.BS:2874-1986 GR. CZ 129 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 1.5 TO 2 MTRS SIZE: 14 -0.043 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR
R
Estab
6) LEADED BRASS ROUND TO SPECN BS 2874 1986 DESIGN CZ 129 IN M CONDITION WITH STRAIGHT LENGTH OF 1 POINT 5 TO 2 MTRS SIZE 7 POINT 5 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0 POINT 3 MM PER MTR[00]()
Specification : LEADED BRASS ROUND TO SPECN.BS-2874-1986 DESIGN CZ-129 IN"M" CONDITION WITH STRAIGHT LENGTH OF 1.5 TO 2 MTRS. SIZE : 7.5 0.036 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR
R
Estab
7) HOT ROLLED AND COLD DRAWN CARBON STEEL ROUND TO SPECN BS 970 PT I 1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTR SIZE 7 POINT 5 MM DIA[00]()
Specification : HOT ROLLED AND COLD DRAWN CARBON STEEL ROUND TO SPECN.BS:970 PT.I-1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTR. WITH 10% SHORTS DOWN TO 2 - 3 METRES SIZE: 7.5 - 0.05 MM DIA.
R
Estab
8) STEEL ROUND TO SPECN BS 970 PART 3 1991 GRADE 430S17 COLD DRAWN SIZE 8 00 MM DIA[00]()
Specification : STEEL ROUND TO SPECN: BS-970 PART-3 :1991 GRADE 430S17 COLD DRAWN SIZE 8.00+1.00 MM DIA.
R
Estab
9) EXTRUDED COLD DRAWN ALUMINIUM ALLOY ROUND TO SPECN BS 1474 1987 DESIGN 2014A COND TB IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 14 POINT 5 MM DIA[00]()
Specification : EXTRUDED,COLD DRAWN ALUMINIUM ALLOY ROUND TO SPECN BS:1474- 1987 DESIGN.2014A COND TB IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE:- 14.5 + 0.5/ - 0.1 MM DIA.
R
Estab
10) STEEL ROUND TO SPECN BS 970 PT III 1991 GRADE 430S17 FERRITIC STEEL COLD DRAWN SIZE 1 POINT 8 MM DIA[00]()
Specification : STEEL ROUND TO SPECN. BS-970 PT.III 1991 GRADE 430S17 FERRITIC STEEL COLD DRAWN SIZE 1.8-0.014 MM DIA.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) BRASS ROD BS2874 1969 CZ124 COND 1 by 2 H OR BS 2872 1969 CZ123 SIZE DIA 18 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH[00]()
Specification : BRASS ROD BS2874:1969 CZ124 COND 1/2 H OR BS 2872:1969 CZ123 SIZE : DIA 18 -0.07 MM HAVING MIN 1.5 MTR STRAIGHT LENGTH.
R
Estab
2) DISC ALUMINIUM TO BS 1470 SIC 1 by 2 H OR BS 3L 16 HAVING D IA H 12 point 19 L12 point 065 THICKNESS 40 SWG[00]()
Specification : DISC ALUMINIUM TO BS 1470, SIC 1/2 H OR BS 3L 16 HAVING D IA H 12.19 L12.065 THICKNESS 40 SWG (0.1219MM)
R
Estab
3) STAINLESS STEEL ROD TO BS 970 PT 1 1991 GRD 410 S 21 or 420 S 25 or 416 S 21 SIZE DIA 5 MM WITH MIN 1 point 5 MTR STRAIGHT LENGTH[00]()
Specification : STAINLESS STEEL ROD TO BS 970, PT 1-1991 GRD 410-S-21 / 420- S-25 / 416-S-21 SIZE: DIA 5.0 +/- 0.05MM WITH MIN 1.5MTR STRAIGHT LENGTH
R
Estab
4) AL ALLOY ROD TO SPEC BS 1474 1972 DESIG 2014A COND TB SIZE DIA 20 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS[00]()
Specification : AL ALLOY ROD TO SPEC BS 1474:1972 DESIG.2014A, COND TB SIZE: DIA 20 + 0.08/-0.13MM HAVING MIN 1.5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS
R
Estab
5) BRASS WIRE HARD DRAWN TO BS 2873 1963 GRADE CZ 119 SIZE DIA 1 MM[00]()
Specification : BRASS WIRE HARD DRAWN TO BS 2873-1963 GRADE CZ 119 SIZE: DIA 1.00 +/- 0.015MM
R
Estab
6) BRASS ROD BS 2874 1969 CZ121 3 PB COND M SIZE DIA 31 point 75 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH[00]()
Specification : BRASS ROD BS 2874:1969 CZ121 3 PB COND M SIZE: DIA 31.75 +/- 0.1 MM HAVING MIN 1.5 MTR STRAIGHT LENGTH.
R
Estab
7) AL ALLOY ROD TO SPEC BS 1474 1972 DESIG 2014A COND TB SIZE DIA 16 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS[00]()
Specification : AL ALLOY ROD TO SPEC BS 1474:1972 DESIG.2014A, COND TB SIZE: DIA 16 + 0.05/-0.10 MM HAVING MIN 1.5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS
R
Estab
8) STEEL WIRE 16 SWG 1 point 626 TO BS 970 PT 1 1983 GRD 080M40 OR 080A52 PT5 1972 080A52[00]()
Specification : STEEL WIRE 16 SWG (1.626) TO BS 970 PT 1 -1983 GRD 080M40 OR 080A52 PT5 :1972:080A52
R
Estab
9) BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE DIA 42 MM WITH MIN 1 point 5 MTR STRAIGHT LENGTH[00]()
Specification : BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE: DIA 42 - 0 10 MM WITH MIN 1.5 MTR STRAIGHT LENGTH
R
Estab
10) BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE DIA 44 MM WITH MIN 1 5 MTR STRAIGHT LENGTH[00]()
Specification : BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE: DIA 44 -0.1 0 MM WITH MIN 1.5 MTR STRAIGHT LENGTH
R
Estab
11) BRASS ROD TO SPECIFICATION BS 2874 CZ121 OR BS 2872 CZ122 SIZE 58 MM DIA[00]()
Specification : BRASS ROD TO SPECIFICATION BS:2874 CZ121 OR BS:2872 CZ122 SIZE; 58 MM DIA
R
Estab
12) BRASS ROD TO SPECIFICATION BS 2874 CZ121 SIZE 65MM DIA[00]()
Specification : BRASS ROD TO SPECIFICATION BS:2874 CZ121 SIZE: 65MM DIA
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) ALUMINIUM ROD 9MM DIA SPECN IS-733-1983[06]()
Specification : IS -733-1983 DESIGNATION 19500
R
Nonestab
2) ALUM.WIRE 5.45MM FOR CARTG.0.32PIS[06]()
Specification : IS:739-1992
R
Nonestab
3) ALUMINIUM ALLOY ROD, DIA 56 MM CONFORMING TO IS: 733 OF 1983[06]()
Specification : IS: 733 OF 1983
R
Nonestab
Category : s
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) BRASS TUBES SEAMLESS OD 6MM ID 5MM[07]()
Specification : JSS: - 9535-02:2008, PHYSICAL PROPERTIES TO SPECN. IS 407-1981
R
Nonestab
2) BRASS TUBE (HALF HARD,GR-I/G.C.Q)[07]()
Specification : BRASS TUBE (HALF HARD, GR-I/G.C.Q.) TO SIZE OD - 160MM X ID - 140MM X LENGTH 200MM.
Specification : JSS 9535-2-FEB.82 WITH AMENEMENT NO.1
R
Nonestab
19) BRASS STRIP 36MM WIDE X 0.76MM THIK[07]()
Specification : JSS-9535 2(FEB 82) WITH AMENDMENT NO 1.
R
Nonestab
20) BRASS STRIP 64MM WIDE X 0.81MM THIK[07]()
Specification : JSS-9535-02- 2008 REV 3
R
Nonestab
21) BRASS STRIP 27MM WIDE X 0.63MM THIK[07]()
Specification : JSS-9535 2FEB 82
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) ALUMINIUM ALLOY AL ZN 4 5 MG 1F 35 DIN 1725 BY 1 SPECN EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 4850 PLUS 20 MM FOR MG AS PER DRG NO IM0584 AND SCOPE OF SUPPLY AS PER ANNEXURE A 6076450584[60]()
Specification : ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN. EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 4850 + 20MM FOR MG AS PER DRG. NO. IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A' 6076450584
C
Nonestab
2) ALUMINIUM ALLOY AL ZN 4 5 MG 1F 35 DIN 1725 BY 1 SPECN EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 3870 PLUS 20MM FOR RG AS PER DRG NO IM0584 AND SCOPE OF SUPPLY AS PER ANNEXURE A 6076451584[60]()
Specification : ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN.EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 3870 +20MM FOR RG AS PER DRG. NO. IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A'
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ALU ALLOY ROD 26.50MM IS733 24345WP (0611505027)()
ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS-412 Mpa MIN.ELON
R
NOT ESTABLISHED
2) ALU ALLOY ROD 31.75MM IS733 64430 W (0611503032)()
ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 W CONDITION
R
NOT ESTABLISHED
3) ALU ALLOY ROD 65MM IS733 GR24345 WP (0611503065)()
ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION WP
R
NOT ESTABLISHED
4) ALU ALLOY ROD 6.50 MM IS:733 24345 (0611500007)()
ALUMINIUM ALLOY ROD 6.50 +/- 0.05 MM DIA IN ST. LENGTH OF 2.5 TO 3 MTRS TO SPECN:-IS-733-1983 REAFFIRMED 2006 (THIRD REVISION) DESIGN 24345 CONDITION : W
R
NOT ESTABLISHED
5) LEAD SHEET 915 X 3 MM IS:405-1992 (0800520003)()
LEAD SHEET 915 MM WIDE X 3 MM THICK IN ROLLED CONDITION IN LENGTH OF 5 MTR MINIMUM TO SPECIFICATION IS:405 (PT. II-1992)
ALUMINIUM ALLOY SHEET SIZE 1200 MM X 2400 MM X 2 MM THICK TO SPECN:IS-737-1986, ( REAFFIRMED 1996 ) ( THIRD REVISION ) DEGN:24345 CONDITION WP ROUNDED TO FULL SHEET WITH HARDNESS MINIMUM 130 VPN
ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
R
Non Established
Category : P
Grade : I,II
Size :
O
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS ROD 23MM BS2874 CZ115 M LF 0711500023
Description : BRASS ROD 23MM BS2874 CZ115 M LF 0711500023()
Specification : BRASS ROD 23 +0.05/-0.10 MM DIA IN LENGTH OF 1.5 TO 2 METRE TO SPECN.BS:2874-1986 CZ-115 M
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BRASS ROD 11MM BS2874 CZ122 M LF 0712203011[07]()
Specification : BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.
R
Nonestab
2) BRASS ROD 17MM SPECN IS 319 89 GR 2 LF 0712100017[07]()
Specification : BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.
R
Nonestab
3) ALU ALLOY ROD 6MM IS 733 GRD 24345 LF 0611515550[06]()
Specification : ALUMINIUM ALLOY ROD 6+/-0.05MM DIA IN LENGTH OF 2.5 TO 3 MTRTO SPECN:BS-1474-1987 GRADE 2014-A OR IS-733-1983 GRD.243453rd.REV)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES-ELASTIC LIMIT 275 MPa Mi
R
Nonestab
4) ALU ALLOY ROD 26 50MM IS733 24345WP LF 0611505027[06]()
Specification : ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS
R
Nonestab
5) ALU ALLOY ROD 10 MM IS733 24345[06]()
Specification : ALUMINIUM ALLOY ROD 10.0 MM(+0.10MM/-0.00MM) DIA IN STRAIGHTLENGTH OF 1.8 TO 2 METRE TO SPEC IS-733-1983 (THIRD REVISION(REFFIRMED 2006) GRADE 24345 IN "WP" CONDITION.
R
Nonestab
6) BRASS ROD 29 MM BS2874 CZ122 M LF 0712200029[07]()
Specification : BRASS ROD 29 +/- 0.10 MM DIA IN LENGTH OF 1.5 TO 3 MTRS. TO SPECN: BS-2874-CZ-122 "M" CONDITION.
R
Nonestab
7) ALU ALLOY ROD 7 MM BS1474 2014A LF 0611500010[06]()
Specification : ALLU.ALLOY ROD 7 +0.03/-0.07 MM DIA IN LENGTH OF 2 TO 3 MTR TO SPECN:BS-1474-1987 GRADE 2014-A OR IS:733-1983 GRD.243453rd.Rev)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES.ELASTIC LIMIT-275 MPa Mi
R
Nonestab
8) ALU ALLOY ROD 39 MM IS 733 24345 W LF 0611505039[06]()
Specification : ALUMINIUM ALLOY ROD 39+0.30/-0.20MM DIA IN ST.LENGTH OF 2 TO2.5 MTR.TO SPECN.IS-733-1983 (THIRD REV.)(REAFFIRMED 2006)GRADE 24345 CONDITION "W".
R
Nonestab
9) ALU ALLOY ROD 17 MM IS 733 24345 WP LF 0611505117[06]()
Specification : ALUMINIUM ALLOY ROD 17.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGTHLENGTH OF 2.5 TO 3.0 METRE TO SPECN.IS:733-1983 (REAFFIRMED-2006) (THIRD REV.) GRADE 24345 IN "WP" CONDITION.NOTE:NO HIGH GRAIN SIZE AREA PERMITTED BELOW DIAMATER 13.96MM.
R
Nonestab
10) ALU ALLOY ROD 17 MM IS 733 GR 24345 LF 0611505017[06]()
Specification : ALUMINIUM ALLOY ROD 17 +0.30/-0.00 MM DIA IN STRAIGTH LENGTHOF 2.5 TO 3.0 METER TO SPECN.BS:1474-1987 GRADE 2014A OR IS:733-1983(THIRD REVISION)(REAFFIRMED2006)GRADE 24345.MATL.TOBE HEAT TREATED TO ACHIEVE THE FOLLING PROPERTIES;ELASTICLI
R
Nonestab
11) ALU ALLOY ROD 18 50MM IS 733 24345 LF 0611505019[06]()
Specification : ALUMINIUM ALLOY ROD 18.5 (+0.15/-0.05)MM DIA IN ST.LENGTH OF2.5TO 3 MTR TO SPECN:IS-733-1983(THIRD REV.)(REAFFIRMED 2006GRADE 24345 IN"WP"COND.OR BS-1474-1987GRADE 2014A IN"T6"CONDMAT.TO BE SUITABLY HEAT TREATED TO ACHIEVE THE ELASTIC LIM
R
Nonestab
12) ALU ALLOY ROD 60MM IS733 GR24345 W LF 0611505060[06]()
Specification : ALUMINIUM ALLOY ROD 60.0 +/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN.IS-733-1983(REAFFIRMED 2006)(THIRD REV.)GRADE-24345,CONDITION 'W'.
R
Nonestab
13) ALU ALLOY ROD 28 50MM BS1474 2014A LF 0619500029[06]()
Specification : ALUMINIMUM ALLOY ROD 28.50 +/-0.3MM DIA IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SPECN. BS-1474-1987 DESIG.2014-A "T4"OR IS:733-1983 DESIGNATION 24345 "W" CONDITION.
R
Nonestab
14) ALU ALLOY ROD 60MM BS1474 2014A T 6 LF 0611509060[06]()
Specification : ALUMINIUM ALLOY ROD 60+/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN: BS 1474-1987-2014-A IN T-6 CONDITION.
R
Nonestab
15) BRASS ROD 21MM BS2874 CZ122 M LF 0712202021[07]()
Specification : BRASS ROD 21+/-0.15 MM DIA EXTRUDED DRAWN & REELED IN ST. LENGTH OF 2 MTRS. MINIMUM TO SPECN:-BS-2874-1986, CZ-122CONDITION "M".
R
Nonestab
16) BRASS ROD 37 5MM BS2874 CZ122M 0712200038[07]()
Specification : BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.
R
Nonestab
17) BRASS ROD 14MM BS2874 CZ122 M LF 0717703904[07]()
Specification : BRASS ROD 14+/- 0.10 MM DIA IN ST LENGTH OF 1.5 TO 2 METRES MIN SPECN.BS 2874-1986 CZ-122 "M"
Specification : BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Al alloy rod 35mm ENAW7075 T6 LF 0611505135
Description : Al alloy rod 35mm ENAW7075 T6 LF 0611505135()
Specification : Al alloy rod 35+/- 0.3mm in std. length of 2.0 to 3.0 meter to specification EN AW 7075-T6
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CUPRO NI STRIP BS EN 1652 LF 0700169101[07]()
Specification : CUPRO NICKEL STRIP SIZE 26+/-0.50 MM WIDE x 0.50[+0.02/-0.03 MM] THICK IN COILS. TO SPECN:- BS EN 1652:1998 DESIGN Cu Ni 25 WITH % Bi RESTRICTED TO 0.002%,MATERIAL CONDITION R-290 OR BS EN 1652:1998 DESIGN Cu Ni 10 Fe 1 Mn. MATERIAL CONDI
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) SS ERW PIPE()
AS PER DRG. NO. V48-0129-4019
C
Not Estab.
2) PHOSPHOR BRONZE ()
45MM SQX 1350 MM LONG
C
Not Estab.
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS ROD 8 5 MM LF 0711906011
Description : BRASS ROD 8 5 MM LF 0711906011()
Specification : TO SPECN:IS-319-2007 REVISION NO.5 (REAFFIRMED -2017) GRADE 1 IN HALF HARD CONDITION
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025
Description : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025()
Specification : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION IS-2062:2011(7th REVISION) GRADE:E250 (QUALITY A)
P
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) MS PLATE 1MX1MX20MM SPECN IS 226 LF 0133021021
Description : MS PLATE 1MX1MX20MM SPECN IS 226 LF 0133021021()
Specification : MILD STEEL PLATE SIZE 1M X 1M X 20MM THICK TO SPECN.IS:226
E
Nonestab
Category : s
Grade : 3
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) STEEL BLANKS FOR ADAPTER[01]()
Specification : BS 970, Dt: 3 -1991, ASTM E 381 – 01, ASTM E 112 – 12, ASTM E 45 – 05 & IS: 8791 – 1978
R
Nonestab
2) STEEL BLANKS FOR BODY BASE OF RGB 60[01]()
Specification : BS 970, Dt: 3 -1991, ASTM E 381 – 01, ASTM E 112 – 12, ASTM E 45 – 05 & IS: 8791 – 1978
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS STRIP 22X1 02 MM LF 0710664345
Description : BRASS STRIP 22X1 02 MM LF 0710664345()
Specification : BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) COPPER TO ASTM B 152 C10200 O PURITY 99 POINT 95 PERCENTAGE MIN TEMPER ANNEALING O TENSILE ST 205 TO 260 MPA ROCKWELL HARDNESS 65 MAX SIZE L 500MM W 172 MM OR ITS MULTIPLE WIDTH THICKNESS 2 PLUS OR MINUS 0 POINT 1 MM[01]()
Specification : COPPER TO ASTM B-152 C10200(O) PURITY 99.95% (MIN) TEMPER: SHEET SHALL BE PRODUCED BY HOT ROLLING & SUBSEQUENTLY ANNEALING (O), TENSILE ST:205 TO 260 MPA, ROCKWELL HARDNESS: 65 (MAX), SIZE:- L = 500MM, W= 172 MM OR ITS MULTIPLE WIDTH, THI
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Aluminium tube 80 5 x 60mm LF 0611558860
Description : Aluminium tube 80 5 x 60mm LF 0611558860()
Specification : Aluminium tube 80.5 x 60mm LF 0611558860
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020
Description : copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020()
Specification : COPPER STRIP 20+/_ 0.2 X 0 75 + 0 02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN BS EN 1652
R
Estab
Category : s
Grade : 3
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 0720200095 PB ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS 7811 1985[70]()
Specification : 0720200095 PB ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS: 7811-1985
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FERROUS AND NON FERROUS METAL[01]()
Specification : TENDER ID D332A52296
R
Estab
2) SEAMLESS TUBES[01]()
Specification : TENDER ID D332A52296
R
Estab
Category : P
Grade : II
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Brass rod 8 5mm bs 2874 cz129 m LF 0741100004
Description : Brass rod 8 5mm bs 2874 cz129 m LF 0741100004()
Specification : Brass rod 8 5mm(-0.050)mm Dia in straight length of 3.0meter(-0.2m max) to specn:BS-2874-CZ-129 cond. 'M' circular ovality 0.020mm max; straightness 01mm in 01 meter & rod should be packed in a suitable box to prevent bending during trans
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS ROD 8MM BS2874 CZ122 M LF 0712100008
Description : BRASS ROD 8MM BS2874 CZ122 M LF 0712100008()
Specification : 0321150115 STAINLESS STEEL TUBE TO SIZE OUTER DIA 115.00 (+) (-) 1.00 MM X INNER DIA 90.00 (+) (-) 1.00 MM X 510.00 (+)2.00 MM LONG TO SPECN: AISI-316.OR, AISI-304
Specification : 0321150125 STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) ALU ALLOY ROD 10 MM IS733 24345 ITEM CODE 0611403010
Description : ALU ALLOY ROD 10 MM IS733 24345 ITEM CODE 0611403010()
Specification : ALUMINIUM ALLOY ROD 10.0 MM(+0.10MM/-0.00MM) DIA IN STRAIGHTLENGTH OF 1.8 TO 2 METRE TO SPEC IS-733-1983 (THIRD REVISION(REFFIRMED 2017) GRADE 24345 IN "WP" CONDITION.
R
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Cable Factory Chandigarh
Name
Specification
Use
Status
1) STAINLESS STEEL WIRE 0.381MM DIA AS PER MSCQ-5 SPECIFICATION NO. 03 ISSUE NO. 01 DATED 16/05/2006[70]()
Specification : STAINLESS STEEL WIRE 0.381MM DIA AS PER MSCQ-5 SPECIFICATION NO. 03 ISSUE NO. 01 DATED 16/05/2006
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) COPPER STRIP TO SPECN IS 14811 2000 CONDITION HD GRADE CU CATH 2 TO SPECN IS 191 2007 SIZE 0 point 18 MM THICK 22 MM WIDE
Description : COPPER STRIP TO SPECN IS 14811 2000 CONDITION HD GRADE CU CATH 2 TO SPECN IS 191 2007 SIZE 0 point 18 MM THICK 22 MM WIDE()
Specification : COPPER STRIP TO SPECN.IS:14811:2000.CONDITION HD GRADE CU CATH - 2 TO SPECN IS:191-2007 SIZE:-0.18-0.02 MM THICK X 22 + 0.5 MM WIDE.
R
Estab
2) CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED AND HEAT TREATED TO CONDITION R TO SPECN BS970 PART I 1983 GRADE 410S21 EN56A SIZE 7 MINUS 0 POINT 08 MM DIA
Description : CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED AND HEAT TREATED TO CONDITION R TO SPECN BS970 PART I 1983 GRADE 410S21 EN56A SIZE 7 MINUS 0 POINT 08 MM DIA()
Specification : CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN. BS970 (PART-I)1983 GRADE 410S21 (EN56A) WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 -
R
Estab
3) ALUMINIUM ALLOY ROUND BAR SIZE 21 MM DIA SPECN IS 733 1983 REAFFIRMED 2006 GR 24345 IN WP
Description : ALUMINIUM ALLOY ROUND BAR SIZE 21 MM DIA SPECN IS 733 1983 REAFFIRMED 2006 GR 24345 IN WP()
Specification : ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 REAFFIRMED 2006 GR.24345 IN "WP" HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 21 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) Copper & Copper based alloys
Description : Copper & Copper based alloys()
3) Aluminum Bars/Rod size up to 1000 mm diameter max.and 6000x1500x4mm. max.
Description : Aluminum Bars/Rod size up to 1000 mm diameter max.and 6000x1500x4mm. max.()
Specification : As per Drawing/specification.
R
Estab
4) ALL TYPES OF STEEL SHEET AND STEEL ROUND
Description : ALL TYPES OF STEEL SHEET AND STEEL ROUND()
Specification : AS PER REQUIRED/SPEC./IS/BS
R
Estab
Category : s
Grade : 3
Size :
O
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) STAINLESS STEEL ROD TO BS 970 PT 1 1991 GRD 410 S 21 or 420 S 25 or 416 S 21 SIZE DIA 5 MM WITH MIN 1 point 5 MTR STRAIGHT LENGTH
Description : STAINLESS STEEL ROD TO BS 970 PT 1 1991 GRD 410 S 21 or 420 S 25 or 416 S 21 SIZE DIA 5 MM WITH MIN 1 point 5 MTR STRAIGHT LENGTH()
Specification : STAINLESS STEEL ROD TO BS 970, PT 1-1991 GRD 410-S-21 / 420- S-25 / 416-S-21 SIZE: DIA 5.0 +/- 0.05MM WITH MIN 1.5MTR STRAIGHT LENGTH
R
Estab
2) AL ALLOY ROD TO SPEC BS 1474 1972 DESIG 2014A COND TB SIZE DIA 16 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS
Description : AL ALLOY ROD TO SPEC BS 1474 1972 DESIG 2014A COND TB SIZE DIA 16 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS()
Specification : AL ALLOY ROD TO SPEC BS 1474:1972 DESIG.2014A, COND TB SIZE: DIA 16 + 0.05/-0.10 MM HAVING MIN 1.5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS
R
Estab
3) ALUMINIUM ALLOY ROUND BAR SIZE 21 MM DIA SPECN IS 733 1983 REAFFIRMED 2006 GR 24345 IN WP
Description : ALUMINIUM ALLOY ROUND BAR SIZE 21 MM DIA SPECN IS 733 1983 REAFFIRMED 2006 GR 24345 IN WP()
Specification : ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 REAFFIRMED 2006 GR.24345 IN "WP" HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 21 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS
R
Estab
4) ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006 GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES SIZE 12 MM DIA WITHOUT PGG
Description : ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006 GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES SIZE 12 MM DIA WITHOUT PGG()
Specification : ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006 GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE: 12 +/- 0.1 MM DIA WITHOUT PGG.
R
Estab
5) COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN IS 737 DESGN 24345 IN T6 CONDITION SIZE 3 POINT 5 MM THICK X 1 MTR WIDTH X 2 POINT 5 MTR LENGTH
Description : COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN IS 737 DESGN 24345 IN T6 CONDITION SIZE 3 POINT 5 MM THICK X 1 MTR WIDTH X 2 POINT 5 MTR LENGTH()
Specification : COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN.IS:737 DESGN-24345 IN 'T6' CONDITION.SIZE: 3.5 +0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH.
R
Estab
6) EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN DTD 5124 LATEST ISSUE IN T6 CONDITION HAVING STRAIGHTNESS OF 0 POINT 4 MM CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0 POINT 5 MM SIZE 70 MM
Description : EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN DTD 5124 LATEST ISSUE IN T6 CONDITION HAVING STRAIGHTNESS OF 0 POINT 4 MM CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0 POINT 5 MM SIZE 70 MM()
Specification : EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG
R
Estab
7) COPPER STRIP TO SPECN EN 13604 CW009A HAVING STRAIGHT LENGTH OF 2 point 5 TO 3 MTS SIZE 64 plus 1 MM WIDE X 4 plus 0 point 1 MM THICK
Description : COPPER STRIP TO SPECN EN 13604 CW009A HAVING STRAIGHT LENGTH OF 2 point 5 TO 3 MTS SIZE 64 plus 1 MM WIDE X 4 plus 0 point 1 MM THICK()
Specification : COPPER STRIP TO SPECN. EN 13604-CW009A HAVING STRAIGHT LENGTH OF 2.5 TO 3 MTS. SIZE:64 +/-1 MM WIDE X 4 +0.1 MM THICK
R
Estab
8) BRASS ROUND TO SPECN BS EN12166 1998 MATERIAL SYMBOLCUZN40PB2 NUMBER CW617N CONDITION R430 HAVING STRAIGHTLENGTH OF 2 TO 3 MTRS SIZE 2 POINT 55 PLUS OR MINUS 0 POINT 03 MM DIA
Description : BRASS ROUND TO SPECN BS EN12166 1998 MATERIAL SYMBOLCUZN40PB2 NUMBER CW617N CONDITION R430 HAVING STRAIGHTLENGTH OF 2 TO 3 MTRS SIZE 2 POINT 55 PLUS OR MINUS 0 POINT 03 MM DIA()
Specification : BRASS ROUND TO SPECN BS EN12166:1998 MATERIAL SYMBOLCUZN40PB2 NUMBER CW617N CONDITION R430 HAVING STRAIGHTLENGTH OF 2 TO 3 MTRS SIZE 2.55 +/- 0.03 MM DIA.
R
Estab
9) OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100 MM X THICKNESS 14 plus 0 point 1MM X 1440MM LONG APPROX
Description : OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100 MM X THICKNESS 14 plus 0 point 1MM X 1440MM LONG APPROX()
Specification : OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100MM X THICKNESS 14 +0.1MM X 1440MM LONG (APPROX)
R
Estab
10) WASHER BRASS TO BS 2870 GRADE CZ108 HAVING OD H 12 point 19 L 12 point 065 ID H9 point 65 THICKNESS SWG21 0 point 813 MM
Description : WASHER BRASS TO BS 2870 GRADE CZ108 HAVING OD H 12 point 19 L 12 point 065 ID H9 point 65 THICKNESS SWG21 0 point 813 MM()
Specification : WASHER BRASS TO BS 2870 GRADE CZ108 HAVING OD H 12.19 L 12. 065, ID H9.65-0.127, THICKNESS SWG21 (0.813MM)
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 6331001200 M S TARGET PLATE FOR CHARGE 100 MM
Description : 6331001200 M S TARGET PLATE FOR CHARGE 100 MM()
Specification : IS:2062
C
Estab
2) 6338501200 M S TARGET PLATE FOR CHARGE 85 MM
Description : 6338501200 M S TARGET PLATE FOR CHARGE 85 MM()
Specification : M.S. TARGET PLATE AS PER IS SPECIFICATION IS:2062 L-500MM x W -500 MM x H 85 MM
C
Estab
Category : p
Grade : 3
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL PIPE O D 100 00MM 0 50 MM X I D 78 00MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T[70]()
Specification : STEEL PIPE O D 100 00MM 0 50 MM X I D 78 00MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T
R
Nonestab
2) 9910449732 STEEL PIPE O D 100 MM 0 50MM X I D 78 MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T[90]()
Specification : 9910449732 STEEL PIPE O D 100 MM 0 50MM X I D 78 MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T
1) READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004[00]()
Specification : READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004
R
Nonestab
2) PAINT PRIMING REDOXIDE ZINC CHROME AMMN AIR DRYING MATT FINISH BRUSHING or SPRAYING[00]()
Specification : READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2004 (FIFTH REV) AMENDMENT NO.1 1995 CONFORMING TO IS:138-1992 (THIRD REV) MAKE ASIAN,NEROLACK,BERGER IS ACCEPTABLE.
1) CASE No.: 1 TO 12.7mm A.D.GUN TO DRG.No.: 6P49CdCb D.S.CAT.No.: 5140-000189, D.C.No.:26103-SA, DATED:11/11/2005 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED. (A 9900)(PACKING BOX FOR 12.7mm AD GUN)[70]()
Specification : AS PER DRG TO CASE No.: 1 TO 12.7mm A.D.GUN TO DRG.No.: 6P49CdCb
D.S.CAT.No.: 5140-000189, D.C.No.:26103-SA, DATED:11/11/2005
FOR D.C.No. LATEST ISSUE TO BE FOLLOWED.
(A 9900)(PACKING BOX FOR 12.7mm AD GUN)
C
Estab
Category : DDP,DP
Grade : II
Size :
1) Ordnance Factory Itarsi
Name
Specification
Use
Status
1) PACKING BOX FOR SPC CHARGE FOR RZ-61()
DRAWING NO.HEMRL/SRP/PHR/05.5 FOUR SHEETS
E
Not Estab
2) PACKING FOX FOR AKASH BOOSTER()
AS PER TSQD NO.DRDL/TSQD/AK/022 REV2 AND DRAWING NO.HEMRL/SRP/AK/BST/CP/04.12(PAGE NO.143)
E
Not Estab
3) WOODEN PALLET()
DRG.NO.4085565 AND PALLET COVER TO DRG. NO.4085566 WITH D.C.NO.35637-A TO ALL COMPONENTS & CONNECTED DRAWINGS
1) CASE HEMK-1 A/L WOOD (SER ) for pkg. 25 Kg. RDX/TNT 60/40[10]()
Specification : DRG. NO. HEF/5038 & TIMBER MATERIAL TO SPECN. HEF/IO/TC&N/10/DT.16/10/2006
R
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) PIECE PACKING SIDE 410 X 150 X 6 MM TH (5 PLY) ITEM NO 8()
PT NO ISV-465 GA DRG NO. CQA(A)/AMN /2543
C
E
2) PIECE PACKING END()
PT NO ISV-241 SA DRG NO CQA(A)/AMN/2543.Det-2 DC.35099-A Dt.31-05-91
C
E
3) PIECE PACKING BOTTOM "B" 448 X 165X 6 MM TH (5 PLY) ITEM NO 7 ()
PT NO ISV-465 GA DRG NO CQA (A) /AMN/2543. SHEET-1 DC-36814-A DT.15.02.02
C
E
4) PIECE PACKING TOP ()
PT NO ISV-240 SA DRG NO CQA(A)/AMN/2543,DET-1.DC-35099-A DT.31-05-91
C
E
5) PARTITION 410 X 45 X 3 MM TH (5 PLY) ITEM NO 9()
PT NO ISV-465 GA DESIGNER REF CQA/AMN/2543 SHEET-1 DC NO.36814-A DT.15-02-02
C
E
6) PIECE PACKING BOTTOM "A" ()
PT NO ISV-242 SA DRG NO CQA (A)/AMN/2543. Det-4.DC NO-35099-A DT.31-05-91
C
E
7) PIECE PACKING SIDE 410 X 150 X 6 MM TH (5 PLY) ITEM NO 8()
PT NO ISV-465 GA DRG NO. CQA(A)/AMN /2543
C
E
8) PIECE PACKING END()
PT NO ISV-241 SA DRG NO CQA(A)/AMN/2543.Det-2 DC.35099-A Dt.31-05-91
C
E
9) PIECE PACKING BOTTOM "B" 448 X 165X 6 MM TH (5 PLY) ITEM NO 7 ()
PT NO ISV-465 GA DRG NO CQA (A) /AMN/2543. SHEET-1 DC-36814-A DT.15.02.02
C
E
10) PIECE PACKING TOP ()
PT NO ISV-240 SA DRG NO CQA(A)/AMN/2543,DET-1.DC-35099-A DT.31-05-91
C
E
11) PARTITION 410 X 45 X 3 MM TH (5 PLY) ITEM NO 9()
PT NO ISV-465 GA DESIGNER REF CQA/AMN/2543 SHEET-1 DC NO.36814-A DT.15-02-02
C
E
12) PIECE PACKING BOTTOM "A" ()
PT NO ISV-242 SA DRG NO CQA (A)/AMN/2543. Det-4.DC NO-35099-A DT.31-05-91
C
E
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) PIECE PACKING BOTTOM "B" 448 X 165X 6 MM TH (5 PLY) ITEM NO 7 [64]()
Specification : PT. NO. ISV-465 GA DESIGNER REF NO: CQA(A)/AMN/2543, SHEET-1 DC-36814-A DT. 15.02.02.
C
Estab
Category : DDP,DP
Grade : II
Size :
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Wooden Packing Crate for 100/120 Kg Aerial Bombs()
As per Drg. & Specification
C
Not Established
Category : DP
Grade : II
Size :
S
1) Ordnance Cable Factory Chandigarh
Name
Specification
Use
Status
1) PACKING BOXES & DRUMS()
AS PER RELEVANT SUPPLY ORDER
R
Not Estab.
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Cable Factory Chandigarh
Name
Specification
Use
Status
1) WOODEN REELS()
AS PER RELEVANT SUPPLY ORDER
R
Not Estab.
2) PLYWOOD REELS()
AS PER RELEVANT SUPPLY ORDER
R
Not Estab.
3) WOODEN CABLE DRUMS()
AS PER RELEVANT SUPPLY ORDER
R
Not Estab.
4) PLYWOOD BOXES & DRUMS()
AS PER RELEVANT SUPPLY ORDER
R
Not Estab.
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS[14]()
Specification : AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS TO DRG.PT.NO. ISV 587 A, DC.37127-A DT.30.07.07.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) BOX UNIT LOAD FOR 155 MM SHELL M107 1465000220[14]()
Specification : DRG.NO.3058086, WITH LATEST DC(I) 36820-A, DT.16.03.2002
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) WOODEN CRATE()
OFN/BMCS/M-92/WOODEN CRATE
C
Estab.
Category : DDP
Grade : II
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CRATE WOOD PACKING INTERNAL SIZE 407 MM X 457 MM X 2286 MM[21]()
Specification : IS:3071-1981 STYLE NO.5 CLASS 'A' (FROM CHIR WOOD)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CASE WOOD PACKING SIZE 381X228X304MM[21]()
Specification : IND/GS/515(f)(3255/PK)
R
Estab
2) CRATE WOOD PACKING CLASS 'A' STYLE 6. SIZE- 6.60 CM X 6.60 CM X 3.30 CM.[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER SISSO HARD WOOD ( NON CONIFEROUS) SCANTLING GR.-I. SIZE-45 MM SQUARE X 1.5 METRS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
2) CRATE WOOD PACKING SIZE (INTERNAL) 74 CMX 66 CM X 64 CM. FOR SADDLE PA UNIVERSAL[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CASE WOOD PACKING INT. SIZE 30 CM X 30 CM X 30 CM[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
2) CASE WOOD PACKING INTERNAL SIZE 45 CM X 30 CM X 30 CM .[21]()
Specification : IS :1503 -1974 STYLE 3 (b)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER SOFTWOOD (CONIFEROUS) SLEEPER GR. I SPECIES CHIR/FIR SIZE 125MM X 200MM & UP X 2.44 MTR. & [21]()
Specification : IS: 190-1974 III REVISIOV & SUPP. SHUDULE CQA/SS/309
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CRATE WOOD PACKING INTERNAL SIZE 62 CM.HX 54.5 CM L X 54.5 CM W AS PER OEF DRG. NO. SK-1166 & IS:3071-1981 CLASS[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
2) CRATE WOOD STYLE NO.5 CLASS B INTERNAL SIZE 50 CM WIDTH X 60 CM LENGTH X 57.50 CM HEIGHT.[21]()
Specification : SPECN.NO. IS:3071-1981
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CRATE WOOD PACKING INTERNAL SIZE 407 MM X 457 MM X 2286 MM[21]()
Specification : IS:3071-1981 STYLE NO.5 CLASS 'A' (FROM CHIR WOOD)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER SOFT WOOD PLANK/SLEEPER OF VARIOUS GRADES & DIMENSIONS [21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER SOFTWOOD CONIFEROUS CHIR FIR PLANK GR I SIZE 35 MM X 200 MM[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER HARDWOOD NON CONIFEROUS PLANT GR 1 SISOO BIJASAL SAL 38 MM X 178 MM X 1 52 MTR[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER BEJASAL FOR BEACON BANDEROL SET ARTY B (FOR DEMI BANDEROL STAFF WOOD). SIZE-40 MM SQUARE X 1300 MM LONG[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
2) WOODEN CRATE/CRATE WOOD PACKING VARIOUS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
3) TIMBER SOFTWOOD CONIFEROUS CHIR FIR PLANK GR I SIZE 35 MM X 200 MM[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255406790 TIMBER NC SIZE 195MM X 30MM X 2 M[22]()
Specification : IND/ME/883(F) (PROV)
R
Nonestab
2) 6584113903 PACKING BOX WOODEN[65]()
Specification : PACKING BOX WOODEN AS PER ARDE DRAWING NUMBER 9759,DETL NO.3 SHEET NO.2
C
Nonestab
3) 2270528358 PLY WOOD 8 MM[22]()
Specification : IS: 303-1989
R
Nonestab
4) 2255540403 TIMBER N C SIZE 60 X 130MM[22]()
Specification : IND/ME/883 (F) (PROV)
R
Nonestab
5) 2255400208 TIMBER N C SIZE 195MM X 12MM X[22]()
Specification : IND/ME/883(F)(PROV)
R
Estab
6) 2255408332 TIMBER NC SIZE 280 X 16 MM[22]()
Specification : IND/ME/883(F)(PROV)
R
Nonestab
7) 2255406390 TIMBER N C SIZE[22]()
Specification : IND/ME/883(F)(PROV)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774300 PACKING BOX FOR RIGID CUTTING CHARGE 85 MM[65]()
Specification : PACKING BOX FOR RIGID CUTTING CHARGE 85 EMPTY TO DRG NO HE/CAST/079 DET.1 TO17 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255526024 TIMBER N C SIZE 75 75 MM[22]()
Specification : TIMBER NON-CONIFEROUS, SIZE 75 MM X 75 MM X 1.80M TO 1.83MAS PER SPECN. NO. IND/ME/883(F)(PROV) DC NO.3754-MEDT. 12-12-2002.
R
Nonestab
2) 6576773700 PACKING BOX FOR MODULAR CHARGE 220G[65]()
Specification : PACKING BOX FOR MODULAR CHARGE 220G COMPRISING OF 5 ITEMS TO DRG. NO. HE/CAST 077 DET 1 TO 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
3) 6576773900 PACKING BOX FOR SHAPED CHARGE 30MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 30MM COMPRISING OF 6 ITEMS TODRG. NO. HE/CAST 084 DET 1 TO 6 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774000 PACKING BOX FOR SHAPED CHARGE 60 MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 60 MM COMPRISING OF 8 ITEMS TO DRG NO. HE/CAST 085 DET 1 TO 8 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
2) 6576774100 PACKING BOX FOR SHAPED CHARGE 90 MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 90 MM COMPRISING OF 10 COMPONENTS TO DRG NO. HE/CAST 086 1 TO 10 EXCLUDING 90 MM CHARGE & SET OF LEGS) & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576773800 PACKING BOX FOR MODULAR CHARGE 350G[65]()
Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774400 PACKING BOX FOR CUTTING CHARGE 100M[65]()
Specification : PACKING BOX (SUB ASSLY) FOR CUTTING CHARGE 100 MM (EMPTY) TO DRG.NO.HE/CAST/080 DET.1 TO 17 & QAP NO.HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2270441000 PLY WOOD 3 MM CWR[22]()
Specification : PLYWOOD FOR GENERAL PURPOSES MR GRADE TYPE AB SIZE 2.40 M X 1.20 M X 3 MM THICK (3 PLY) TO SPECN. IS: 303-1989, THIRD REV., AMDT. 2, REAFFIRMED 1998
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2270353012 PLY WOOD 3 MM BWR BB[22]()
Specification : PLYWOOD TYPE BB BWR GRADE TO SPECN. IS: 303 - 1989,SUPPLEMENTARY SCHEDULE CIGS/SS/37 (C) WITH AMENDMENT NO 1 TO 4 CATALOGUE NO H3/5530 - 000036,SIZE:- 1.20 M X 1.20 M X 3 MM -3 PLY
R
Nonestab
2) 2270460637 PLY WOOD 12 MM MR AA[22]()
Specification : PLY WOOD GENERAL PURPOSE TO GRADE MR TYPE AA TO SPECN.IS:303-1989 WITH AMENDMENT NO.2,SIZE - 1.20 M X 1.20 M X 12 MM TH.9 PLY.
R
Nonestab
3) 2255058168 TIMBER MANGO[22]()
Specification : TIMBER MANGO SIZE - 85 MM X 23 MM X 1.25 M TO 1.28 M SPECN.NO. IND/ME/883 (F) (PROV) DC - 3754 - ME DT.12/12/2002.
CRATE WOOD 12-A TO DRG.PT.NO. ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948 (a,k) DC (I) 36868-A, AIDE MEMOIRE W/4
C
NOT ESTABLISHED
3) CATCH LOCK ASSY DRG NO. IA-1053 4 CO (9911358061)()
CATCH LOCK ASSY AS PER DRG NO. IA-1053 SHT 1, SHT 2, SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH, 2-LINK, 3-HOOK PLATE, 4-HASP
C
NOT ESTABLISHED
4) SET OF CARRIER 4A/L & CARRIER 5A/L (9911358263)()
AMMUNITION CONTAINER CARRIER-4A/L (STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169 (n) DC NO.35576-A, AIDE MEMOIRE P/11. AND AMMUNITION CONTAINER CARRIER-5A/L (STEEL) TO DRG. PT NO. ISV-336A DC(I) NO 33739-A DT.30/3/85 TO SPEC
AMMN. CONTAINER BOX C 55A (PLYWOOD) FOR AMMN. CONT. ASSY.173A TO DRG.PART NO. ISV 626A DC 37283-A DT. 30/6/2011 REFER WITH DRG.PART NO. ISV.557 GA. DC 37283-A DT 30/6/2011
BOX W-131 MK-3/L WOOD TO DRG PT NO. ISV/162-A DC-35568-A DATE 1/9/93 SPECN:-IA-948 (ak) DC-36868-A, AIDE MEMOIRE W/4
C
NOT ESTABLISHED
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BOX COMPLETE ROUND PART NO 522282 LF 9911358479
Description : BOX COMPLETE ROUND PART NO 522282 LF 9911358479()
Specification : BOX COMPLETE/ROUND PART NO.5227282.
E
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LIST OF COMPONENTS ENCLOSED.-O.F.KHAMARIA[99]()
Specification : AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LIST OF COMPONENTS ENCLOSED.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) WOODEN BOX FOR BPC (5b-84)[65]()
Specification : AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) WOODEN BOX FOR BPC (5b-84)[65]()
Specification : AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) WOODEN BOX FOR SPECIAL METAL CONTAINER[65]()
Specification : DRG. NO. OFBA/MPC/75. ALL THE ACCEPTANCE AND INSPECTION/QUALITY CRITERIA SHOULD BE AS PER TU 34E-2015
R
Nonestab
2) WOODEN BOX FOR BPC 4W 20[65]()
Specification : WOODEN BOX FOR PROP BPC (4W-20) AS PER DRAWING ATTACHED SPECIFICATION –DRG.NO.-NAI(J) 245
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) AMMUNITION CONTAINER BOX F2A L F 9911356419
Description : AMMUNITION CONTAINER BOX F2A L F 9911356419()
Specification : AMMUNITION CONTAINER BOX F2A PLYWOOD TO DRG NO. TRD-1612 (AMMUNITION CONTAINER BOX F2A DRG PT NO.ISV-557-A DC-36222-ADT.22/01/97.)SPECN:-IA-948(ak) DC-36868-A THE SHADE OF PAINTTO BE USED IS PAINT READY MIX. QUICK DRYING MATT.FOR GENERALP
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) PALLET FOR SHELL 155 MM ( 12 PACKS)[65]()
Specification : DRG.NO. 155-1210
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) Wooden Packing Box for Propulsion Unit as per Drg No FS2436 C
Description : Wooden Packing Box for Propulsion Unit as per Drg No FS2436 C()
Specification : Wooden Packing Box for Propulsion Unit as per Drg. No. FS-2436 C
R
Estab
2) Wooden Packing Box for Warhead as per Drg No FS 2435 C
Description : Wooden Packing Box for Warhead as per Drg No FS 2435 C()
Specification : Wooden Packing Box for Warhead as per Drg. No. FS-2435 C
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) PACKING BOX SPTA FOR TPDK1 LF 9927075323[99]()
Specification : PACKING BOX (SPTA) TO DRG NO. T01/MA/4.162.236/14M2.
C
Nonestab
2) PACKING BOX LF 9927075325[99]()
Specification : PACKING BOX TO DRG NO.B-23/MA/4267018/12 M3
Specification : BOX CARTRIDGE LTPE WOOD FOR PACKING 10 KGS CARTRIDGES LTPE 100 GMS(IN CARTONS) AS PER DRG. NO. OFBA/PE/12.DT-08/05/2001 AMENDED ON DT.23.07.2002.
R
Estab
Category : ddp
Grade : 2
Size :
S
1244
K MAX TECHNOLOGIES PVT LTD
23F, SIDCO INDUSTRIAL ESTATE NORTH PHASE AMBATTUR, CHENNAI Tamil Nadu
PIN1 : 600098
Phone No. : 26255230 GSTIN : 33AACCK5808R1Z4
1) CASING FOR HEAD 1G46 TO DRG NO. AL8635059 (7440200784)[7440200784]()
Specification : AS PER DRAWING
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) housing ep to drg. cwc/229/32/2[74]()
Specification : housing ep to drg. cwc/229/32/2
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) FRAME FOR GOGGLES ALL TERRAIN AS PER DRG NO CQA GS PROV GS 5 1 2012 C SHT 2 OF 4 WITH ELASTIC TAPE INCLUDING PIN and BUCKLE COMPLETE DRG NO CQA GS PROV GS 5 1 2012 C SHT 3 OF 4 DETAILED SPECN FOR FRAME and ELASTIC TAPE AS PER ANNEXURE[74]()
Specification : FRAME FOR GOGGLES(ALL TERRAIN) AS PER
DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.2 OF 4,
WITH ELASTIC TAPE INCLUDING PIN & BUCKLE(COMPLETE)
DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.3 OF 4.
DETAILED SPECN. FOR FRAME & ELASTIC TAPE AS
PER
C
Nonestab
2) A SET OF 19 COMPONENTS OF HR BINO AS PER DETAIL OF COMPONENTS MENTIONED IN ANNEXURE A[74]()
Specification : A SET OF 19 COMPONENTS OF HR BINO AS PER DETAIL OF COMPONENTS MENTIONED IN ANNEXURE-"A". Eye piece cover green, Interpupillary distance plate printed, Rubber armouring right, Rubber armouring left, Objective cap right green, Objective ca
C
Estab
3) LENS FOR GOGGLES ALL TERRAIN AS PER DRG NO CQA GS PROV GS 5 1 2012 C SHT 4 OF 4 WITH MICRO FIBER CLEANING CLOTH OF SIZE 20 CM X 20 CM MADE OF 100 percent POLYESTER IN BLACK COLOUR DETAILED SPECN FOR LENS AS PER ANNEXURE[74]()
Specification : LENS FOR GOGGLES(ALL TERRAIN) AS PER
DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C),SHT. 4 OF 4
WITH MICRO FIBER CLEANING CLOTH OF
SIZE 20 CM X 20 CM MADE OF 100% POLYESTER IN
BLACK COLOUR.
DETAILED SPECN. FOR LENS AS PER ANNEXURE.
C
Nonestab
4) SHOCK ABSORBER TO DRG NO MCT 1420 COMP COMPRISING OF MCT 1419 MCT 1421 DULY RUBBER MOULDED[74]()
Specification : SHOCK ABSORBER TO DRG NO. MCT-1420(COMP) COMPRISING OF MCT-1419 & MCT-1421. DULY RUBBER MOULDED
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Cable Factory Chandigarh
Name
Specification
Use
Status
1) SPOOL PLASTIC TO HOLD 55 METERS OF CABLE[70]()
Specification : SPOOL PLASTIC TO HOLD 55 METERS OF CABLE DRG. NO. OCF SK 1087-B
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) EXTENDABLE BUTT ASSY AS PER DRG No. K 5000 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 5000 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLASTIC MAGAZINE Assy FOR K7040[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040
E
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FIXED BUTT ASSY AS PER DRG No K3000 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 3000 WITH FIRM'S MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) PLASTIC BULLET FOR CARTG. 7.62MM ANTI RIOT[60]()
Specification : AS PER DRG.NO.
C
Nonestab
Category : ddp
Grade : Grade I
Size :
S
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) Button Polyester 19mm OG[21]()
Specification : IS 1461-1984 second revision (reaffirmed - 2003)
R
Nonestab
Category : ddp
Grade : Grade II
Size :
S
1245
MUNISH FORGE PVT. LTD.
VILLAGE GOBINDGARH, ADJOINING PHASE VII FOCAL POINT LUDHIANA Punjab
PIN1 : 141010
Phone No. : 2671481 GSTIN : 03AABCM2155Q1ZE
DRG.PART NO.ISX-46GE SHEET-1 DC NO.37366-A, DT.26.07.14 & SHEET-2 DC NO.37366-A,DT.26.07.14
C
Not Estab
Category : DDP,DP
Grade : I,II
Size :
L
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Forged Head (Un- Machined )()
As per Drg. & Specification
C
Not Established
Category : DP
Grade : II
Size :
L
1) Engine Factory Avadi
Name
Specification
Use
Status
1) Cylinder liner (Cast Iron Alloy) ()
303-07-26
C
Not Estab
2) Cylinder liner (Forging)()
303-07-22
C
Not Estab
Category : DDP,DP
Grade : I,II
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) GENRAL MACHINE FORGING FROM 100 gm TO 150 kg()
As GCF Spcn./Drg./Size & requirements
C
Not Estab
2) RUBBERIZED FORGINGS & FABRICATED PRODUCTS()
As GCF Spcn./Drg./Size & requirements
C
Not Estab
3) ERW PIPE 1/2 INCH TO 4 INCH & ERW HOLLOW SECTION()
As GCF Spcn./Drg./Size & requirements
C
Not Estab
4) ASSEMBLED FABRICATED/WELDED PRODUCTS()
As GCF Spcn./Drg./Size & requirements
C
Not Estab
5) SHEET METAL COMPONENTS()
As GCF Spcn./Drg./Size & requirements
C
Not Estab
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SHELL 105 MM IFG ILLG.2A (EMPTY ASSY)[62]()
Specification : DRG.NO.ARDE 9769 SHT NO 3 PT NO ISX 68 GE,DC-36686A DT.10-07-2000 AND SPECN. NO.CQA (A) 4928 DC 36684-A
C
Estab
Category :
Grade : Grade III
Size :
L
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) T.A. LINK (COMPLETE)()
AS PER OFM SPECIFICATION
C
NOT ESTABLISHED
2) FILLING PLUG FORGING 1000LB()
AS PER OFM SPECIFICATION
C
NOT ESTABLISHED
3) FORGING FOR TA GUIDE()
AS PER OFM SPECIFICATION
C
NOT ESTABLISHED
4) FORGED BODY FOR 81MM BOMB MORTAR-C()
AS PER OFM SPECIFICATION
C
NOT ESTABLISHED
Category : P
Grade : I
Size :
L
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Proof Machined Body for 51 MM HE()
As Per Drg. No- SK- 8345/C
C
Not Estab.
Category : DDP
Grade : I
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOMB BODY ASSY. FOR 250KG PRE-FRAG.[99]()
Specification : BOMB BODY ASSEMBLY TO DRG. NO. ARDE 08040001030000000PB DT.14/05/2015.
C
Nonestab
Category : p
Grade : Grade II
Size :
L
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) MACHINING OF FORGED CANISTER[63]()
Specification : It is intimated that the DRAWINGS/ SPECIFICATIONS will be available on the below mentioned address :
Govt. Of India,
Ministry of Defence (DGQA)
Controllerate of Quality Assurance (Amn),
Khadki, Pune- 411 003
Telephone: 25824013-1
C
Nonestab
Category : ddp
Grade : Grade I
Size :
L
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CANISTER ASSY. FOR SHELL 155MM ILLG. M1A1[63]()
Specification : DRG. NO. 2440A13003 DC-36552-A
C
Nonestab
Category : ddp
Grade : Grade I
Size :
L
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOMB 250 KG HSLD, ARDE-9501-01/1 EMPTY[99]()
Specification : BOMB 250 KG HSLD EMPTY ASSEMBLY TO DRG NO. ARDE-9501-01 (DET.NO-1) ASSEMBLED WITH ROLLING RING ASSY TO DRG. NO. ARDE-9501-01 (DET NO.18) ON THE BOMB.
E
Nonestab
Category : p
Grade : Grade II
Size :
L
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOMB 450 KG HSLD EMPTY ASSY ARDE-2122[99]()
Specification : HIGH SPEED LOW DRAG , 450 KG MC/HE, A/C BOMB EMPTY ASSEMBLY TO DRG NO ARDE-2122 DETAIL-1, 2SHEET- SHEET NO.1 R.NO.1DT.7-3-91 & 2 DT.11-04-07. SHEET NO 2 R.1 DT.7-3-91 & 2 DT13-4-07.
E
Nonestab
Category : p
Grade : Grade II
Size :
L
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SHELL BODY BLANK FOR 84MM HE & ILLG.[99]()
Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F. KHAMARIA DRG.NO. TRD-839(L)
C
Nonestab
2) BOMB AERIAL 100-120 KG HE, EMPTY[99]()
Specification : AERIAL BOMB 100 - 120 KG.(EMPTY ASSEMBLY) TO OFAJ DRG NO. AAIW/BS-0067 PACKED IN"PACKING FOR EMPTY AERIAL BOMB 100-120 "TO OFK DRG.NO.KhPK-410026(4 SHEETS). Painted externally lightgrey ISC 631 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC
E
Nonestab
3) SET OF BOMB BODY EMPTY ASSY FOR AERIAL BOMB 100-120 KG[99]()
1) GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK-989,3145/63[70]()
Specification : GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK
Specification : MOULDING POWDER, MOULDINGPLASTICS (PHENOLIC)
TO SPECCN NO. JSS 1097 GRD. "Z" WITH A MINIMUM IMPECT STRENGTH OF 0.81 JOULE AND MINIMUM TENSILE STRENGTH OF 41.37 MPa/ or nylon 66 gp colour black to specn deef/ stan 93-8/1 without glass fi
C
Estab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) MAGAZINE ASSEMBLY TO DRG.NO.AR/024-RFI. FOR ASSAULT RIFLE 7.62MM.(GHAATAK).(TRADE FINISH). CONSISTING OF:- I)AR/023/2/2. II)AR/024/01-RFI. III)AR/024/02-RFI. IV)AR/024/03-RFI & V)AR/024/04-RFI[70]()
Specification : MAGAZINE ASSEMBLY TO DRG.NO.AR/024-RFI. FOR ASSAULT RIFLE 7.62MM.(GHAATAK).(TRADE FINISH). CONSISTING OF:- I)AR/023/2/2. II)AR/024/01-RFI. III)AR/024/02-RFI. IV)AR/024/03-RFI & V)AR/024/04-RFI
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) GUARD HAND ASSY (FOR DARK BLUE GRAY)TO DS CAT NO.1005-007775(DC-26520-SA). CONSISTING OF:- 1) 1005-560844(DC-26635-SA)2) 5360-007116(DC-26521-SA), 3)1005-007903(DC-26521-SA) &4) 5305-077989 (WITH S.S.REFLECTOR).ARDE SPECN.ARDE/SPECN/538(PROV). FOR RI[79]()
Specification : GUARD HAND ASSY (FOR DARK BLUE GRAY)TO DS CAT NO.1005-007775(DC-26520-SA). CONSISTING OF:- 1) 1005-560844(DC-26635-SA)2) 5360-007116(DC-26521-SA), 3)1005-007903(DC-26521-SA) &4) 5305-077989 (WITH S.S.REFLECTOR).ARDE SPECN.ARDE/SPECN/538(P
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) GUARD HAND ASSY.(UPPER)(STEEL STRIP)[FOR DARK BLUE GRAY COL.TO DS CAT NO.1005-560046 (DC-26533-SA). CONSISTING OF:-1)1005-560047(DC-25638-SA) 2)1005-560832(DC-26635-SA) &3)5320-022259(DC-26504-SA),(2-NOS.)FOR RIFLE 5.56MM INSAS.[79]()
Specification : GUARD HAND ASSY.(UPPER)(STEEL STRIP)[FOR DARK BLUE GRAY COL.TO DS CAT NO.1005-560046 (DC-26533-SA). CONSISTING OF:-1)1005-560047(DC-25638-SA) 2)1005-560832(DC-26635-SA) &3)5320-022259(DC-26504-SA),(2-NOS.)FOR RIFLE 5.56MM INSAS.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL[70]()
Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
2) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91 D S CAT No 1005 007723 D C No 22706 SA Dt 5 point 11point 94 IMPROVED VERSION FOR RIFLE 7point 62mm 1A1 TO D S C T No 1005 007504 1005 007505 1005 007506 1005 007507 1005 001593 1005 1718[70]()
Specification : AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,
E
Nonestab
3) SUPPLY OF LOWER HAND GUARD BAND AS PER DRG NO K 1204 STAR WITH FIRMS MATERIAL[70]()
Specification : K-1204*
C
Nonestab
4) COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL[70]()
Specification : COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL
C
Nonestab
5) SUPPLY OF MAGAZINE 7 point 62mm 2A ICR 84A[70]()
Specification : SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE
C
Nonestab
6) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG No K 3011 STAR REQUIRED FOR TAR[70]()
Specification : AS PER DRG No.K-3011* REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY TO D S CAT NO 1005 004025 DC NO 26416 SA DATED 09 05 2008 WITH DETAILS OF LATEST ISSUE D S CAT NOS 5305 005010 5340 015297 5340 016097 1005 001664 1005 004026 1005 004028[70]()
Specification : BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,100
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY TO D S CAT NO 1005 004025 DC NO 26416 SA DATED 09 05 2008 WITH DETAILS OF LATEST ISSUE D S CAT NOS 5305 005010 5340 015297 5340 016097 1005 001664 1005 004026 1005 004028[70]()
Specification : BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,100
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY TO D S CAT NO 1005 004025 DC NO 26416 SA DATED 09 05 2008 WITH DETAILS OF LATEST ISSUE D S CAT NOS 5305 005010 5340 015297 5340 016097 1005 001664 1005 004026 1005 004028[70]()
Specification : BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,100
C
Nonestab
2) MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR[70]()
Specification : MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA
C
Nonestab
2) LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF SCREW AXIS MAGAZINE CATCH TO D S CAT NO 5305 018183 D C NO 25762 SA DT 10 6 03 REQUIRED IN WHITE FINISHED CONDITION WITH FIRMS MATERIAL[70]()
Specification : AS PER D.S.CAT NO.5305 - 018183 D.C. NO. 25762-SA DT. 10-6-03. (REQUIRED IN WHITE FINISHED CONDITION) WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()
Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG NO K 4011 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.K-4011 WITH FIRMS MATERIAL.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY AS PER DRG NO K 2050 ALT STR 2 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : UPPER HAND GUARD ASSY AS PER DRG NO K 2050 ALT STR 2 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY AS PER DRG No.K-2050 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.K-2050 WITH FIRMS MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) COVER FOR FIRING MECHANISM TO DRG. NO. 30P 3038[70]()
Specification : AS PER DRG OF COVER FOR FIRING MECHANISM TO DRG. NO. 30P 3038
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN EJECTOR UPPER TO DS CAT NO 5315 001758 DC NO 25999 SA DT 20 10 04 FOR DC NO LATEST ISSUE TO BE FOLLOWED WHITE FINISHED CONDITION WITH FIRM MATERIAL ICR 1326[70]()
Specification : AS PER DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 FOR DC NO. LATEST ISSUE TO BE FOLLOWE (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1326)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE AS PER DRG NO K 1111 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1111
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF SCREW PISTOL GRIP TO D S CAT NO 5305 005004 ICR 1380 TO LATEST D C No 24275 SA DATED 26 02 1999 FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]()
Specification : AS PER D.S. CAT. NO. 5305-005004 (ICR - 1380) TO LATEST D.C No.24275-SA DATED 26.02.1999 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED
1) HANDLE CARRYING ASSEMBLY PLASTIC ICR 63SA D S CAT No 1005 004051 D C No 19513 SA DATED 25 02 1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA 150 G D C No[70]()
Specification : AS PER DRG (ICR - 63SA) D.S.CAT.No.: 1005-004051, D.C.No.:19513-SA, DATED:25-02-1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA/150(G),
C
Nonestab
2) 14 5 MM MAGAZINE ASSY TO DRG NO 16000 ST 2 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
3) MANUFACTURING AND SUPPLY OF COVER COMBINATION ASSY AS PER DRAWING NUMBER 30P 1500[70]()
Specification : MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310
C
Nonestab
4) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
5) CLAMP HANDLE SUB ASSY TO DRG NO 30P 1310 REQD FOR 40mm MGL[70]()
Specification : CLAMP HANDLE SUB ASSY. TO DRG. NO. 30P 1310 REQD. FOR 40mm MGL
C
Nonestab
6) SUPPLY OF TRIGGER TO DS CAT NO 1005 001690 ICR 1238 DC NO 27044 SA DT 23 03 2017 WITH FIRMS MATERIAL FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]()
Specification : SUPPLY OF TRIGGER TO DS CAT NO 1005-001690 (ICR 1238) DC NO 27044-SA DT. 23.03.2017 WITH FIRMS MATERIAL FOR DC NO LATEST ISSUE TO BE FOLLOWED
R
Nonestab
7) Manufature and supply of BUTT NORMAL ASSEMBLY POLYMER AS PER DRG NO 27P 660 02 FOR RIFLE 7 62MM 1A1[82]()
Specification : Manufature and supply of BUTT NORMAL ASSEMBLY (POLYMER) AS PER DRG. NO. 27P 660-02.FOR RIFLE 7.62MM 1A1
E
Nonestab
8) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
9) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
10) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]()
Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle
Specification : SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the cont
R
Nonestab
10) CORD NYLON 3120N B.L. WHITE[2101116236]()
Specification : SPCEN. IS:4227-1998 except that in appearence finish and all other respect not defined in this specification the material shall confirm to the sealed pattern held in the custody of the controller, CQAT&C, KANPUR. Sampling plan, criteria
Specification : Spcns. NUMBER OF SPINDLES=16;NUMBER OF ENDS=32NUMBER OF PLAITS/DM=38-44;NUMBER OF CORE THREADS=3 WEIGHT/M IN GMS=6.3 MAX.TEX OF YARN SHEATH=16.7X3X3
CORE =16.7X6X3 BREAKING LOAD IN KG (15CM BETWE
R
Nonestab
13) CORD NYLON BRAIDED 2452N FOR PP[21]()
Specification : JSS:4020-8
R
Estab
14) TAPE NYLON TUBULAR 25MM 13380N UD[21]()
Specification : JSS:8315-07-1982
R
Estab
15) TAPE TEXTILE NYLON 14MM UD[21]()
Specification : ADRDE/Specn/1993/44
R
Estab
16) TAPE NYLON 19 MM UNDYED[2101776052]()
Specification : SPECIFICATION NO. : ADDE/BP/3(c).
R
Nonestab
17) TAPE TEXTILE NYLON 25.4MM UD[21]()
Specification : ADRDE/Specn/1983/11
R
Estab
18) TAPE TEXTILE NYLON 32MM UD[21]()
Specification : JSS:8315-06-1981
R
Estab
19) TAPE TEXTILE NYLON 38MM UD[21]()
Specification : JSS:8315-07-1982
R
Estab
20) TAPE TEXTILE NYLON 44 MM (BS 6914 N) V. NO.6 NAVY BLUE[2101786844]()
Specification : SPECIFICATION NO.: JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
21) TAPE TEXTILE NYLON 14MM DYED[21]()
Specification : IS:9267-1979
R
Estab
22) TAPE TEXTILE NYLON 19 MM O.G. (BS=1893-N) V.NO.2[2101776047]()
Specification : SPECIFICATION NO. :JSS:8315-6 OR IS:4228
Specification : SPECIFICATION NO. TECH PART NO.ADRDE/QMS/
TGTE/C/2018/04 DATED.13.06.2018
R
Nonestab
38) CARDAGE NYLON 66,23 KG CORELESS[2101726659]()
Specification : 1S;4227-1998.
R
Nonestab
39) BRAIDED NYLON CORD FOR A.P.[2111402221]()
Specification : SPECN-IS:4227(VARIETY NO.-11_)
R
Nonestab
40) BRAIDED NYLON CORD FOR AERO SPACE PURPOSE(BS:68 KGf)[2101119846]()
Specification : SPECN. NO. IS:4227-1998.(V NO.6)
R
Nonestab
41) CORD NYLON 1785 N B L WHITE[2101116225]()
Specification : SPECN NO:JSS:4020-9-2013,
( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the control
Specification : SPECIFICATION NO. : JSS - 4020 - 8 EXCEPT THAT IN APPEARANCE
R
Nonestab
47) CORD NYLON BRAIDED 250 KG U/D (I CODE 6412)[2101126412]()
Specification : SPECN-ADRDE/QMS/TDTM/C-2010/04
R
Nonestab
48) CORD NYLON BRAIDED FOR PARACHUTE 225 N WHITE[2101119836]()
Specification : SPECIFICATION NO. : IS:4227-1998
R
Nonestab
49) CORD NYLON BRAIDED UNDYED 345 N ( CORELESS ) FOR AMMUNITION PARA[2101119845]()
Specification : SPECN.NO.: ADRDE/SPECN/1987/31.
appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the
custody
R
Nonestab
50) CORDAGE NY. 66, BRAIDED 2940 N U/D[2101126278]()
57) CORDAGE NYLON BRAIDED 12 MM BS:1200 KG ,COLOUR-OLIVE/DARK --GREEN WEIGHT 7000 + - 50 GM/100 MTR[9911022276]()
Specification : SPECN NO.:-IS:4227 MANUFACTURED FROM HIGH TENACITY NYLON
R
Nonestab
58) CORD NYLON BRAIDED 1785 N FOR PERSONNEL PARA U/D 4020-000298[2101116209]()
Specification : SPECIFICATION NO.: JSS-4020-8 (i) Sampling Plan as per Annexure I attached.(ii) 100% sampling,inspection & testing will be resorted to (iii)In appearance, workmanship finish &other respects not defined in this JSS specification the materi
R
Nonestab
59) CORDAGE NYLON BRAIDED 318 KG I.CODE-6263[2101126263]()
Specification : SPCN. NO:IS:4227-1980 EXCEPT MASS/ METRES NOT TO EXCEED 8GM.
R
Nonestab
60) CORDAGE NYLON BRAIDED 5331 N[2101126246]()
Specification : SPECN. NO.: IS : 4227-1981
R
Nonestab
61) CORDAGE NYLON BRAIDED BS-3600 N U/D[2101126341]()
Specification : SPECIFICATION NO. : IND/TC/2555 except that :-
in appearance finish and other respects not defined in this
specification the material shall conform to the sealed
pattern held in the custody of the Controller,CQAT&C
R
Nonestab
65) CORDAGE NYLON BS-1800 N OLIVE GREEN[2101126340]()
77) TAPE NYL.15MM BS 185 KG U/D.THE TAPE SHALL BE IN CONTINUOUS LENGTH OF 110 M(EXCLUTING SAMPLING)WITHOUT ANY FLAG OTHERWISE THAT ROLL BE TREATED AS SHORT LENGTH[2101221273]()
Specification : SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES.
1-COUNT OF YARN-210 DENIER, HIGH TENACITY.
2-WIDTH-25 MM +-1MM.
3-THICKNESS-0.5 MM TO 0.8 MM.
R
Nonestab
111) TAPE NYLON 25.4 MM (BS 227 KG)[2101786886]()
Specification : SPCN. NO.ADDE/BP/3(c)
R
Nonestab
112) TAPE NYLON 25.4 MM BS=137 KGS. U/D[2101796985]()
Specification : ADDE/BP/1(B) WITH 20-30% ELONGATION & PROPER HEAT SETTING
R
Nonestab
123) TAPE NYLON 28 MM U/D 7500N BS,SPECNS.NO.-AS UNDER PARTCULARS[2101786939]()
Specification : 1-LENGTH PER ROLL(MIN) --100M ---IS:1954
2-WIDTH IN MM 28 + - 0.5 ---IS:1954
3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702
4-MASS,gm,MAX --17gm ---IS:4727
5-BREAKING LOAD "N" MIN. --7500 ---IS:1969
R
Nonestab
124) TAPE NYLON 30 MM O.G. BS 580 KG.[2101786930]()
134) TAPE NYLON 66,43 MM.B.S. 9000 N U/D[2101797010]()
Specification : ADRDE/SPECN/1985/27(a)
R
Nonestab
135) TAPE NYLON BLACK STRETCH 26 MM (BS :1050 N)[2101786912]()
Specification : SPECIFICATION :-WIDTH -26MM.
THICKNESS-0.58+-.01 MM
WT./MTR.-6.6 GM
NO.OF ENDS-178+1 INTERLOCKING
PICKS/CM-26
TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N
R
Nonestab
136) TAPE NYLON TUBULAR 2.54 CM (BS-240 KG)[2101786926]()
Specification : SPECIFICATION:IND/ADE/0061
R
Nonestab
137) TAPE NYLON TUBULAR 2.54 CM U/D 1850 KG[2101786895]()
Specification : AS PER PARTICULARS GIVEN IN SHEET NO.102 OF DRAWING NO. ADRDE/1164/A-7(a)
WIDTH - 25.4 MM,
THICKNESS - 2.35 MM (MAX)
MASS/METER - 36.5 GM (MAX.)
NO. OF ENDS - 316 +2 (GOLDEN THREAD AT CENTRE)
PICKS/
R
Nonestab
138) TAPE NYLON TUBULAR 25.4 MM WHITE 2355 N[2101777058]()
Specification : SPECIFICATION NO.: IND/TC/2666 ROLL LENGTH 55 MTR. INCLUDING SAMPLING
Specification : SPECN.NO.AS PER PARTICULAR
1.WIDTH : 25.4MM
2.THICKNESS : 2.35MM
3.Wt/mtr IN gms : 36.5 gms ( MAX.)
4.NO. OF ENDS : 316 +_ 2 GOLDEN THREADS AT CENTER (INCLUDING BOTH LAYERS )
5.PICKS
145) TAPE PARA-ARAMID 25 MM, 1000 KGF[2010797688]()
Specification : SPECN. NO. ADRDE/2002/57.
R
Nonestab
146) Tape Para-aramid 26 mm, 1600 kgf Tubular[2010797689]()
Specification : ADRDE/SPECN/2002/57
R
Nonestab
147) TAPE POLYESTER 13 MM BS:1800 - N[2101796983]()
Specification : SPECIFICATION :-
WIDTH---------------------13 MM +/-1
WEIGHT/MRT.IN GMS.--------4.8 GMS.MAX.
B.S. IN NEWTON------------1800-N MIN.
THICKNESS 500 GMS/CM.SQR.--0.51 MM +/-0.2
TEX OF YARN---WARP----52, WEFT------23.9.
NO.OF ENDS--
R
Nonestab
148) TAPE POLYESTER 13.5 MM BS:3200-N[2101796982]()
Specification : SPECIFICATION :-
WIDTH-------------------------13.5 MM +/-1
WEIGHT/MTR. IN Gms.-----------10.3 gms (MAX)
B.S.IN NEWTON-----------------3200-N (MIN)
THICKNESS 500 gms./CM.SQR.----1.03 MM (MAX)
TEX OF YARN----WARP--110 (FACE + BAC
R
Nonestab
149) TAPE TEXTILE NYLON 14 MM BS 230 KG[2101776045]()
Specification : JSS : 8315-06 EXCEPT THAT: PICKS/DM -260-280
(2 PICKS/SHED) WEFT YARN DENIER -210 X 2 or 420 X 1
R
Nonestab
150) TAPE TEXTILE NYLON 19MM NAVY BLUE (BS 1893 N) VARIETY NO.2.[2101786820]()
Specification : SPECIFICATION NO. :JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
151) TAPE TEXTILE NYLON 25.4MM U/D BS:3952N VATIETY NO 3[2103784274]()
Specification : SPECIFICATION :-JSS 8315-6
R
Nonestab
152) TAPE TEXTILE NYLON 43 MM U D BS 9000 N[2101786843]()
159) TAPE TUBULAR NYL.36 MM 2900 KG U/D[2101797648]()
Specification : AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN)
CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3
TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS
R
Nonestab
160) TAPE TUBULAR NYLON 1.1 CM 450 KG U/D[2101797665]()
161) TAPE TUBULAR NYLON 14 MM UNDYED[2101786814]()
Specification : SPECN.NO.ADRDE/SPECN/1981/6.
R
Nonestab
162) TAPE TUBULAR NYLON 18 MM BRAIDED U/D (700 KG.)[2101786894]()
Specification : SPECN. NO.ADDE/SPECN/1992/38.
R
Nonestab
163) TAPE TUBULAR NYLON 2.54 CM BS 1800 KG UNDYED[2101786908]()
Specification : SPECIFICATION NO.: BS=17650 N (1800 KG MIN.)
WIDTH 25.4 + 0.4 MM THICKNESS 2.3+ 0.3 MM
WT. PER MTR.IN GRM 40 MAX.
R
Nonestab
164) TAPE TUBULAR NYLON 22 MM 700 KG U/D.[2101786934]()
Specification : SPECN NO. ADDE/BP/1(b).
R
Nonestab
165) TAPE TUBULAR NYLON 27 MM BS 1600 KG[2101786958]()
Specification : NEW TECHNICAL PARTICULAR NO ADRDE/QMS/TGTE/T/2019/01 DATED : 15 JAN 2019
R
Nonestab
166) TAPE TUBULAR NYLON 27 MM U/D BS 2000 KG.[2101786935]()
Specification : SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1
2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25
3.MASS/METERS,(gm) MAX 47
4-ENDS IN FULL WIDTH SUGGESTED 130
5.PICKS/CM SUGGESTED
172) WEBBING NYL 50 MM OG BS 2950 KG[2101877394]()
Specification : SPECN-IS:4727 EXEPT WIDTH
R
Nonestab
173) WEBBING NYLON 44MM 2500 KG GREY[2101626734]()
Specification : SPECN: WIDTH: 44/(+0/-1)MM THICK:2.7/(+/-0.1MM)WT/MT:79G(MAX)
B.S:2500KG(MIN).NO OF ENDS IN FULL WIDTH FACE&BACK 260 BINDERS-42. PICKS/DM: 240/244 (BOTH LAYER).
CONSTRUCTION OF YARN (TEX X FOLD) WARP 29.6X3X2, WEFT
R
Nonestab
174) WEBBING NYLON 102 MM UNDYED[2101877101]()
Specification : SPECIFICATION:ADD/MAT/1
R
Nonestab
175) WEBBING NYLON 13MM (BS=460KG).[2101877067]()
Specification : IS: 9267-1979
R
Nonestab
176) WEBBING NYLON 25.4 MM UNDYED[2101877025]()
Specification : SPECN NO :ADRDE/SPECN/1983/11(b)
R
Nonestab
177) WEBBING NYLON 43 MM UNDYED BS = 4800 KG.[2101877343]()
178) WEBBING NYLON 44 MM (2950 KG) FOR P.P. NAVY BLUE[2101877044]()
Specification : Specification No. : IS : 4727-1968.
SAMPLING PLAN : As per Annexure I attached.
Pre-Inspection, Warranty clause, Advance sample Clause &
Packing & Marking as per Annexure II ATTACHED
R
Nonestab
179) WEBBING NYLON 44 MM 1000 KG STEEL GREY[2101877117]()
Specification : SPECN-NO:-CIADE/35 (b)
R
Nonestab
180) WEBBING NYLON 44 MM 1815 KG NAVY BLUE FOR P.P.[2101877144]()
Specification : Specification No.: IS : 4727-1968.
SAMPLING PLAN AS PER ANNEXURE III ATTACHED.
R
Nonestab
181) WEBBING NYLON 44 MM 1815 KG STEEL GREY[2101877119]()
Specification : SPECNS NO. IS:4727-1968.
R
Nonestab
182) WEBBING NYLON 44 MM 2950 KG STEEL GREY[2101877120]()
Specification : SPECN. IS:4727-1968
R
Nonestab
183) WEBBING NYLON 44 MM O.G. 1815 KG.[2101876971]()
Specification : SPCN.NO. IS:4727 LATEST.
R
Nonestab
184) Webbing Nylon 44 mm OG[9911022278]()
Specification : Specification - IS:4727 (Type-2) and shall have the following dimensions and properties:-
1. Count of yarn- 840 denier high tenacity nylon yarn.
2. width- 44 mm +- 1.5 mm
3. thickness - 1.1 mm (min) to 2.0 mm (max)
4.breaking s
R
Nonestab
185) WEBBING NYLON 44 MM U D 17800N[2101876973]()
Specification : SPECN. NO.: IS:4727-1968 except for :-
i)Sampling Plan and Criteria of conformity shall be as per CQAT and C/QAI NO.CQAT and
C/QAI/TC-8/7(b).
ii)In appearance, workmanship, finish and all other respects not defined in this IS Specn.
R
Nonestab
186) WEBBING NYLON 44 MM, OG.BS-1815 KG F RESIN TREATED[2101292003]()
188) WEBBING NYLON 44mm 1000kg OG (I.CODE 7078)[2101877078]()
Specification : ADRDE/QMS/TDTM/SPECN/99
R
Nonestab
189) WEBBING NYLON 44mm 9807N U/D[2110999003]()
Specification : SPECN: CIADE/35 (b)
R
Nonestab
190) WEBBING NYLON 44mm OG 2950kg.[2101876972]()
Specification : SPECIFICATION NO.: IS : 4727-1968.
R
Nonestab
191) WEBBING NYLON 51 MM UNDYED BS=480 KGS.[2101877051]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 50mtr. for Roll Length Ex.cluding sampling.
R
Nonestab
192) WEBBING NYLON 60MM BS4000KG U/D IN ROLL LENGTH 105M(EXCL.SAMPLING)[2101221276]()
Specification : SPECN-AS PER PARTICULARS---- WIDTH :60(+0,-2)MM
THICKNESS :4.0(+-0.1MM, WEIGHT/METER 135 GM
BREAKING STRENGTH :4000 KG(MIN),HEAT SETTG:PR.HET.SETG REQD
TOTAL NO.OF END:309+1 INTERLOCK.THREAD(4 END WORKING AS ONE)
PICKS/DM :
R
Nonestab
193) WEBBING NYLON 85mm OG[2101877109]()
Specification : SPECN NO AS PER PARTICULAR.
WIDTH IN MM :-------------= 85 +(-)1.0
THICKNESS IN MM )
AT 200 gm/cm Sqr.PRESSURE)= 2.0/2.1
MASS/MTR.IN Gms.-----
R
Nonestab
194) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 1100 KG).[2101877114]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 100mtr. Roll Length Excluding sampling.
R
Nonestab
195) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 680 KG).[2101877014]()
Specification : SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the cont
R
Nonestab
10) CORD NYLON 3120N B.L. WHITE[2101116236]()
Specification : SPCEN. IS:4227-1998 except that in appearence finish and all other respect not defined in this specification the material shall confirm to the sealed pattern held in the custody of the controller, CQAT&C, KANPUR. Sampling plan, criteria
Specification : Spcns. NUMBER OF SPINDLES=16;NUMBER OF ENDS=32NUMBER OF PLAITS/DM=38-44;NUMBER OF CORE THREADS=3 WEIGHT/M IN GMS=6.3 MAX.TEX OF YARN SHEATH=16.7X3X3
CORE =16.7X6X3 BREAKING LOAD IN KG (15CM BETWE
R
Nonestab
13) CORD NYLON BRAIDED 2452N FOR PP[21]()
Specification : JSS:4020-8
R
Estab
14) TAPE NYLON TUBULAR 25MM 13380N UD[21]()
Specification : JSS:8315-07-1982
R
Estab
15) TAPE TEXTILE NYLON 14MM UD[21]()
Specification : ADRDE/Specn/1993/44
R
Estab
16) TAPE NYLON 19 MM UNDYED[2101776052]()
Specification : SPECIFICATION NO. : ADDE/BP/3(c).
R
Nonestab
17) TAPE TEXTILE NYLON 25.4MM UD[21]()
Specification : ADRDE/Specn/1983/11
R
Estab
18) TAPE TEXTILE NYLON 32MM UD[21]()
Specification : JSS:8315-06-1981
R
Estab
19) TAPE TEXTILE NYLON 38MM UD[21]()
Specification : JSS:8315-07-1982
R
Estab
20) TAPE TEXTILE NYLON 44 MM (BS 6914 N) V. NO.6 NAVY BLUE[2101786844]()
Specification : SPECIFICATION NO.: JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
21) TAPE TEXTILE NYLON 14MM DYED[21]()
Specification : IS:9267-1979
R
Estab
22) TAPE TEXTILE NYLON 19 MM O.G. (BS=1893-N) V.NO.2[2101776047]()
Specification : SPECIFICATION NO. :JSS:8315-6 OR IS:4228
Specification : SPECIFICATION NO. TECH PART NO.ADRDE/QMS/
TGTE/C/2018/04 DATED.13.06.2018
R
Nonestab
38) CARDAGE NYLON 66,23 KG CORELESS[2101726659]()
Specification : 1S;4227-1998.
R
Nonestab
39) BRAIDED NYLON CORD FOR A.P.[2111402221]()
Specification : SPECN-IS:4227(VARIETY NO.-11_)
R
Nonestab
40) BRAIDED NYLON CORD FOR AERO SPACE PURPOSE(BS:68 KGf)[2101119846]()
Specification : SPECN. NO. IS:4227-1998.(V NO.6)
R
Nonestab
41) CORD NYLON 1785 N B L WHITE[2101116225]()
Specification : SPECN NO:JSS:4020-9-2013,
( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the control
Specification : SPECIFICATION NO. : JSS - 4020 - 8 EXCEPT THAT IN APPEARANCE
R
Nonestab
47) CORD NYLON BRAIDED 250 KG U/D (I CODE 6412)[2101126412]()
Specification : SPECN-ADRDE/QMS/TDTM/C-2010/04
R
Nonestab
48) CORD NYLON BRAIDED FOR PARACHUTE 225 N WHITE[2101119836]()
Specification : SPECIFICATION NO. : IS:4227-1998
R
Nonestab
49) CORD NYLON BRAIDED UNDYED 345 N ( CORELESS ) FOR AMMUNITION PARA[2101119845]()
Specification : SPECN.NO.: ADRDE/SPECN/1987/31.
appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the
custody
R
Nonestab
50) CORDAGE NY. 66, BRAIDED 2940 N U/D[2101126278]()
57) CORDAGE NYLON BRAIDED 12 MM BS:1200 KG ,COLOUR-OLIVE/DARK --GREEN WEIGHT 7000 + - 50 GM/100 MTR[9911022276]()
Specification : SPECN NO.:-IS:4227 MANUFACTURED FROM HIGH TENACITY NYLON
R
Nonestab
58) CORD NYLON BRAIDED 1785 N FOR PERSONNEL PARA U/D 4020-000298[2101116209]()
Specification : SPECIFICATION NO.: JSS-4020-8 (i) Sampling Plan as per Annexure I attached.(ii) 100% sampling,inspection & testing will be resorted to (iii)In appearance, workmanship finish &other respects not defined in this JSS specification the materi
R
Nonestab
59) CORDAGE NYLON BRAIDED 318 KG I.CODE-6263[2101126263]()
Specification : SPCN. NO:IS:4227-1980 EXCEPT MASS/ METRES NOT TO EXCEED 8GM.
R
Nonestab
60) CORDAGE NYLON BRAIDED 5331 N[2101126246]()
Specification : SPECN. NO.: IS : 4227-1981
R
Nonestab
61) CORDAGE NYLON BRAIDED BS-3600 N U/D[2101126341]()
Specification : SPECIFICATION NO. : IND/TC/2555 except that :-
in appearance finish and other respects not defined in this
specification the material shall conform to the sealed
pattern held in the custody of the Controller,CQAT&C
R
Nonestab
65) CORDAGE NYLON BS-1800 N OLIVE GREEN[2101126340]()
77) TAPE NYL.15MM BS 185 KG U/D.THE TAPE SHALL BE IN CONTINUOUS LENGTH OF 110 M(EXCLUTING SAMPLING)WITHOUT ANY FLAG OTHERWISE THAT ROLL BE TREATED AS SHORT LENGTH[2101221273]()
Specification : SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES.
1-COUNT OF YARN-210 DENIER, HIGH TENACITY.
2-WIDTH-25 MM +-1MM.
3-THICKNESS-0.5 MM TO 0.8 MM.
R
Nonestab
111) TAPE NYLON 25.4 MM (BS 227 KG)[2101786886]()
Specification : SPCN. NO.ADDE/BP/3(c)
R
Nonestab
112) TAPE NYLON 25.4 MM BS=137 KGS. U/D[2101796985]()
Specification : ADDE/BP/1(B) WITH 20-30% ELONGATION & PROPER HEAT SETTING
R
Nonestab
123) TAPE NYLON 28 MM U/D 7500N BS,SPECNS.NO.-AS UNDER PARTCULARS[2101786939]()
Specification : 1-LENGTH PER ROLL(MIN) --100M ---IS:1954
2-WIDTH IN MM 28 + - 0.5 ---IS:1954
3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702
4-MASS,gm,MAX --17gm ---IS:4727
5-BREAKING LOAD "N" MIN. --7500 ---IS:1969
R
Nonestab
124) TAPE NYLON 30 MM O.G. BS 580 KG.[2101786930]()
134) TAPE NYLON 66,43 MM.B.S. 9000 N U/D[2101797010]()
Specification : ADRDE/SPECN/1985/27(a)
R
Nonestab
135) TAPE NYLON BLACK STRETCH 26 MM (BS :1050 N)[2101786912]()
Specification : SPECIFICATION :-WIDTH -26MM.
THICKNESS-0.58+-.01 MM
WT./MTR.-6.6 GM
NO.OF ENDS-178+1 INTERLOCKING
PICKS/CM-26
TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N
R
Nonestab
136) TAPE NYLON TUBULAR 2.54 CM (BS-240 KG)[2101786926]()
Specification : SPECIFICATION:IND/ADE/0061
R
Nonestab
137) TAPE NYLON TUBULAR 2.54 CM U/D 1850 KG[2101786895]()
Specification : AS PER PARTICULARS GIVEN IN SHEET NO.102 OF DRAWING NO. ADRDE/1164/A-7(a)
WIDTH - 25.4 MM,
THICKNESS - 2.35 MM (MAX)
MASS/METER - 36.5 GM (MAX.)
NO. OF ENDS - 316 +2 (GOLDEN THREAD AT CENTRE)
PICKS/
R
Nonestab
138) TAPE NYLON TUBULAR 25.4 MM WHITE 2355 N[2101777058]()
Specification : SPECIFICATION NO.: IND/TC/2666 ROLL LENGTH 55 MTR. INCLUDING SAMPLING
Specification : SPECN.NO.AS PER PARTICULAR
1.WIDTH : 25.4MM
2.THICKNESS : 2.35MM
3.Wt/mtr IN gms : 36.5 gms ( MAX.)
4.NO. OF ENDS : 316 +_ 2 GOLDEN THREADS AT CENTER (INCLUDING BOTH LAYERS )
5.PICKS
145) TAPE PARA-ARAMID 25 MM, 1000 KGF[2010797688]()
Specification : SPECN. NO. ADRDE/2002/57.
R
Nonestab
146) Tape Para-aramid 26 mm, 1600 kgf Tubular[2010797689]()
Specification : ADRDE/SPECN/2002/57
R
Nonestab
147) TAPE POLYESTER 13 MM BS:1800 - N[2101796983]()
Specification : SPECIFICATION :-
WIDTH---------------------13 MM +/-1
WEIGHT/MRT.IN GMS.--------4.8 GMS.MAX.
B.S. IN NEWTON------------1800-N MIN.
THICKNESS 500 GMS/CM.SQR.--0.51 MM +/-0.2
TEX OF YARN---WARP----52, WEFT------23.9.
NO.OF ENDS--
R
Nonestab
148) TAPE POLYESTER 13.5 MM BS:3200-N[2101796982]()
Specification : SPECIFICATION :-
WIDTH-------------------------13.5 MM +/-1
WEIGHT/MTR. IN Gms.-----------10.3 gms (MAX)
B.S.IN NEWTON-----------------3200-N (MIN)
THICKNESS 500 gms./CM.SQR.----1.03 MM (MAX)
TEX OF YARN----WARP--110 (FACE + BAC
R
Nonestab
149) TAPE TEXTILE NYLON 14 MM BS 230 KG[2101776045]()
Specification : JSS : 8315-06 EXCEPT THAT: PICKS/DM -260-280
(2 PICKS/SHED) WEFT YARN DENIER -210 X 2 or 420 X 1
R
Nonestab
150) TAPE TEXTILE NYLON 19MM NAVY BLUE (BS 1893 N) VARIETY NO.2.[2101786820]()
Specification : SPECIFICATION NO. :JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
151) TAPE TEXTILE NYLON 25.4MM U/D BS:3952N VATIETY NO 3[2103784274]()
Specification : SPECIFICATION :-JSS 8315-6
R
Nonestab
152) TAPE TEXTILE NYLON 43 MM U D BS 9000 N[2101786843]()
159) TAPE TUBULAR NYL.36 MM 2900 KG U/D[2101797648]()
Specification : AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN)
CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3
TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS
R
Nonestab
160) TAPE TUBULAR NYLON 1.1 CM 450 KG U/D[2101797665]()
161) TAPE TUBULAR NYLON 14 MM UNDYED[2101786814]()
Specification : SPECN.NO.ADRDE/SPECN/1981/6.
R
Nonestab
162) TAPE TUBULAR NYLON 18 MM BRAIDED U/D (700 KG.)[2101786894]()
Specification : SPECN. NO.ADDE/SPECN/1992/38.
R
Nonestab
163) TAPE TUBULAR NYLON 2.54 CM BS 1800 KG UNDYED[2101786908]()
Specification : SPECIFICATION NO.: BS=17650 N (1800 KG MIN.)
WIDTH 25.4 + 0.4 MM THICKNESS 2.3+ 0.3 MM
WT. PER MTR.IN GRM 40 MAX.
R
Nonestab
164) TAPE TUBULAR NYLON 22 MM 700 KG U/D.[2101786934]()
Specification : SPECN NO. ADDE/BP/1(b).
R
Nonestab
165) TAPE TUBULAR NYLON 27 MM BS 1600 KG[2101786958]()
Specification : NEW TECHNICAL PARTICULAR NO ADRDE/QMS/TGTE/T/2019/01 DATED : 15 JAN 2019
R
Nonestab
166) TAPE TUBULAR NYLON 27 MM U/D BS 2000 KG.[2101786935]()
Specification : SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1
2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25
3.MASS/METERS,(gm) MAX 47
4-ENDS IN FULL WIDTH SUGGESTED 130
5.PICKS/CM SUGGESTED
172) WEBBING NYL 50 MM OG BS 2950 KG[2101877394]()
Specification : SPECN-IS:4727 EXEPT WIDTH
R
Nonestab
173) WEBBING NYLON 44MM 2500 KG GREY[2101626734]()
Specification : SPECN: WIDTH: 44/(+0/-1)MM THICK:2.7/(+/-0.1MM)WT/MT:79G(MAX)
B.S:2500KG(MIN).NO OF ENDS IN FULL WIDTH FACE&BACK 260 BINDERS-42. PICKS/DM: 240/244 (BOTH LAYER).
CONSTRUCTION OF YARN (TEX X FOLD) WARP 29.6X3X2, WEFT
R
Nonestab
174) WEBBING NYLON 102 MM UNDYED[2101877101]()
Specification : SPECIFICATION:ADD/MAT/1
R
Nonestab
175) WEBBING NYLON 13MM (BS=460KG).[2101877067]()
Specification : IS: 9267-1979
R
Nonestab
176) WEBBING NYLON 25.4 MM UNDYED[2101877025]()
Specification : SPECN NO :ADRDE/SPECN/1983/11(b)
R
Nonestab
177) WEBBING NYLON 43 MM UNDYED BS = 4800 KG.[2101877343]()
178) WEBBING NYLON 44 MM (2950 KG) FOR P.P. NAVY BLUE[2101877044]()
Specification : Specification No. : IS : 4727-1968.
SAMPLING PLAN : As per Annexure I attached.
Pre-Inspection, Warranty clause, Advance sample Clause &
Packing & Marking as per Annexure II ATTACHED
R
Nonestab
179) WEBBING NYLON 44 MM 1000 KG STEEL GREY[2101877117]()
Specification : SPECN-NO:-CIADE/35 (b)
R
Nonestab
180) WEBBING NYLON 44 MM 1815 KG NAVY BLUE FOR P.P.[2101877144]()
Specification : Specification No.: IS : 4727-1968.
SAMPLING PLAN AS PER ANNEXURE III ATTACHED.
R
Nonestab
181) WEBBING NYLON 44 MM 1815 KG STEEL GREY[2101877119]()
Specification : SPECNS NO. IS:4727-1968.
R
Nonestab
182) WEBBING NYLON 44 MM 2950 KG STEEL GREY[2101877120]()
Specification : SPECN. IS:4727-1968
R
Nonestab
183) WEBBING NYLON 44 MM O.G. 1815 KG.[2101876971]()
Specification : SPCN.NO. IS:4727 LATEST.
R
Nonestab
184) Webbing Nylon 44 mm OG[9911022278]()
Specification : Specification - IS:4727 (Type-2) and shall have the following dimensions and properties:-
1. Count of yarn- 840 denier high tenacity nylon yarn.
2. width- 44 mm +- 1.5 mm
3. thickness - 1.1 mm (min) to 2.0 mm (max)
4.breaking s
R
Nonestab
185) WEBBING NYLON 44 MM U D 17800N[2101876973]()
Specification : SPECN. NO.: IS:4727-1968 except for :-
i)Sampling Plan and Criteria of conformity shall be as per CQAT and C/QAI NO.CQAT and
C/QAI/TC-8/7(b).
ii)In appearance, workmanship, finish and all other respects not defined in this IS Specn.
R
Nonestab
186) WEBBING NYLON 44 MM, OG.BS-1815 KG F RESIN TREATED[2101292003]()
188) WEBBING NYLON 44mm 1000kg OG (I.CODE 7078)[2101877078]()
Specification : ADRDE/QMS/TDTM/SPECN/99
R
Nonestab
189) WEBBING NYLON 44mm 9807N U/D[2110999003]()
Specification : SPECN: CIADE/35 (b)
R
Nonestab
190) WEBBING NYLON 44mm OG 2950kg.[2101876972]()
Specification : SPECIFICATION NO.: IS : 4727-1968.
R
Nonestab
191) WEBBING NYLON 51 MM UNDYED BS=480 KGS.[2101877051]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 50mtr. for Roll Length Ex.cluding sampling.
R
Nonestab
192) WEBBING NYLON 60MM BS4000KG U/D IN ROLL LENGTH 105M(EXCL.SAMPLING)[2101221276]()
Specification : SPECN-AS PER PARTICULARS---- WIDTH :60(+0,-2)MM
THICKNESS :4.0(+-0.1MM, WEIGHT/METER 135 GM
BREAKING STRENGTH :4000 KG(MIN),HEAT SETTG:PR.HET.SETG REQD
TOTAL NO.OF END:309+1 INTERLOCK.THREAD(4 END WORKING AS ONE)
PICKS/DM :
R
Nonestab
193) WEBBING NYLON 85mm OG[2101877109]()
Specification : SPECN NO AS PER PARTICULAR.
WIDTH IN MM :-------------= 85 +(-)1.0
THICKNESS IN MM )
AT 200 gm/cm Sqr.PRESSURE)= 2.0/2.1
MASS/MTR.IN Gms.-----
R
Nonestab
194) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 1100 KG).[2101877114]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 100mtr. Roll Length Excluding sampling.
R
Nonestab
195) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 680 KG).[2101877014]()
Specification : GASKET IN VALCUNISED CHLOROPRENE RUBBER COMPOUND (NEOPRENE) TO SPECIFICATION IND/ME/884 (PROV), CLASS C40 FOR STEEL PACKAGES 120MM ARJUN AMMUNITION AS PER DRG. NO. OFBH/PACKAGE 120 MM/ C/2113. NABL TEST CERTIFICATE OR GOVT. ACCREDITED LAB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) 9911833148 RUBBER GASKET A OFB SK 712[99]()
Specification : AS PER OFBH SPECIFICATION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1256
Model Exims
624-C, Defence Colony, Opp. Bank of Baroda, Jajmau, Kanpur Uttar Pradesh
PIN1 : 208010
Phone No. : 0515-2824051, 2824052, 09792970622, Fax No.: 0515-2824053 GSTIN : 09AADFM6163H1Z5
1) LEATHER BUFF. CHROME TANNED SIDE BLACK FOOT BALL PRINT()
AS PER REQUIREMENT & SPECIFICATION
R
Non Established
2) LASTED UPPER OF VARIOUS SIZES FOR BOOT HIGH ANKLE DVS()
AS PER REQUIREMENT & SPECIFICATION
R
Non Established
3) LEATHER LINING BLACK COMBINATION TANNED DRY MILLED()
AS PER REQUIREMENT & SPECIFICATION
R
Non Established
Category : P
Grade : II
Size :
S
1) Ordnance Equipment Factory
Debarred
Name
Specification
Use
Status
1) BUFF VT SOLE BEND[21]()
Specification : BP SECTION L/NO. BP/T&C/VT SOLE BEND/01 DATE 07.02.2013 AND AS IN TE
R
Nonestab
2) LASTED UPPER OF VARIOUS SIZES FOR BOOT HIGH ANKLE DVS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
3) Leather Buff Wet Blue for Zuggrain/Football Print/Upper Leather[21]()
Specification : QA/L/WET BLUE/BUFF date 22.03.2009 (As per special Terms & Conditions attached). Measuring of Wet Blue Leather may be done either by hand or by measuring machine
R
Nonestab
4) LEATHER BUFF. CHROME TANNED SIDE BLACK FOOT BALL PRINT[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
5) LEATHER CHROME TANNED SIDE BLACK PLAIN VARIOUS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
7) Wet Blue for Lining Leather[21]()
Specification : QA/L/WET BLUE/BUFF(Lining) date 19.05.2009
R
Nonestab
8) EYELETTED CLOSED UPPER FOR BOOT ANKLE DVS IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
9) EYELETTED CLOSED UPPER FOR ELECTRICAL SAFETY SHOE IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
10) EYELETTED CLOSED UPPER FOR HIGH ANKLE BOOT IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
11) Eyeletted Closed Upper with stiffner for Derby Shoe in various sizes[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
12) EYELETTED CLOSED UPPER WITH TOE PUFF AND COUNTER STIFFNER FOR BOOT ANKLE DVS IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
13) EYELETTED CLOSED UPPER WITH TOE PUFF AND COUNTER STIFFNER FOR ELECTRICAL SAFETY SHOE IN VARIOUS SIZE[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
14) EYELETTING OF CLOSED UPPERS[21]()
Specification : IND/TC/3844
R
Nonestab
15) LASTED CLOSED UPPER FOR BOOT NAVY IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
16) LASTED CLOSED UPPER FOR SAFETY SHOE IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
Category : P
Grade : II
Size :
1) Ordnance Equipment Factory
Debarred
Name
Specification
Use
Status
1) BUFF VT SOLE BEND[21]()
Specification : BP SECTION L/NO. BP/T&C/VT SOLE BEND/01 DATE 07.02.2013 AND AS IN TE
R
Nonestab
2) LASTED UPPER OF VARIOUS SIZES FOR BOOT HIGH ANKLE DVS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
3) Leather Buff Wet Blue for Zuggrain/Football Print/Upper Leather[21]()
Specification : QA/L/WET BLUE/BUFF date 22.03.2009 (As per special Terms & Conditions attached). Measuring of Wet Blue Leather may be done either by hand or by measuring machine
R
Nonestab
4) LEATHER BUFF. CHROME TANNED SIDE BLACK FOOT BALL PRINT[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
5) LEATHER CHROME TANNED SIDE BLACK PLAIN VARIOUS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
