1) P U FOAM 3.00 MM THICK X 0.90M X 1.90M[21](OEM is M/s Ashoka PU Foam (India) Pvt. Ltd., Bareilly)()
Specification : IS:7888-1976 & APPENDIX "G" OF IND/TC/3844
R
Estab
2) POLY URETHANE FOAM 8 MM THICK X 90 CM X 190 CM[21](OEM is M/s Ashoka PU Foam (India) Pvt. Ltd., Bareilly)()
Specification : AS PER APPENDIX "G" OF IND/TC/3844 (a)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) POLYTHENE FILM OF SIZE- O.O4 MM THICK X 120 CMS WIDE FOR PACKING[21] (OEM is M/s Bhatia Plastics, Kanpur)()
Specification : IS:2508-1984 (2ND REV.)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) LATEX FOAM VARIOUS()
AS PER REQUIREMENT & SPECIFICATION
R
Category : P
Grade : III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) WOOLLEN FELT 3 MM THICK[2101877099]()
Specification : SPECN NO:IS:1719-1988.
R
Nonestab
2) FELT WOOLLEN 6 MM MOTH PROOF[2101226032]()
Specification : SPECN.NO.IS:1719-2000
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) H.D.P.E.SHEET 1.5 MM THICK[2101291996]()
Specification : SPCN. BEST TRADE QUALITY
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) LDPE SHEET +2-0 MM THICK[2110065015]()
Specification : AS PER SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) FABRICATION OF NUMBER PLATE IN BILINGUAL IDENTIFICATION LABEL FOR KM FLOAT[2510094049]()
Specification : SPECN-DRG.NO.IMPD-0928/1
NOTE-PLATES WILL BE PREPARED AFTER COMBINATION OF SERIAL NO. PLATES WILL BE PREPARED AFTER CONFIRMATION OF SERIEL NO.& YEAR 05 MTR.FROM FLOAT SHOP OF OPF
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) COTTON PADDING 37 CM x 1.5 MM THICK[2101099937]()
Specification : SPECIFICATION NO. : AS PER APPROVED SAMPLE.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) COTTON PADDING LENGTH=2100 MM,WIDTH=1900 MM,THICKNESS=15 TO 20 MM.[2101126399]()
Specification : SPECN-BEST TRADE QUALITY.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) COTTON PADDING 2 THICK 135 CM WIDTH[2101126417]()
1) PREMACHINED BLANK FOR TAR TRUNNION K 4002STR2 COMPONENT AS PER DRG NO TEND 2616STR[70]()
Specification : PREMACHINED BLANK FOR TAR TRUNNION K 4002STR2 COMPONENT AS PER DRG NO TEND 2616STR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK S 2 TO DRG NOTEND 2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY[70]()
Specification : PRE MACHINED BLANK S-2 TO DRG.NO.TEND2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Head Breech Bolt for 0.315 Sporting Rifle()
Drg. No. TEND 2045
C
Established
2) Extractor for 0.315 Sporting Rifle()
Drg. No. 29P 0020*2
C
Established
Category : DDP,DP
Grade : I,II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PISTON AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL
C
Estab
2) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Estab
3) SUPPLY OF HAMMER AS PER DRG NO K -2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Estab
4) SUPPLY OF TRIGGER AS PER DRG NO K-2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Estab
5) SUPPLY OF TRUNNION AS PER DRG NO. K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Estab
6) SUPPLY OF DISCONNECTOR AS PER DRG NO.K-2065 WITHFRMS MATERIAL[70]()
Specification : AS PER DRG NO.K-2065 WITHFRMS MATERIAL
C
Estab
7) SUPPLY OF COMPENSATOR AS PER DRG NO.K-1021 WITH FIRMSMATERIAL[70]()
Specification : AS PER DRG NO.K-1021 WITH FIRMSMATERIAL
C
Estab
8) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG. NO. K 2012[70]()
Specification : AS PER DRG. NO. K 2012
C
Estab
9) LOWER HAND GUARD BAND AS PER DRG NO. K 1204 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 1204 WITH FIRMS MATERIAL
C
Estab
10) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO. K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Estab
Category : DDP,DP
Grade : I,II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO. K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Estab
2) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2031
C
Estab
3) SELECTOR LEVER AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Estab
4) STUD AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Estab
5) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()
Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE
C
Estab
Category : DDP,DP
Grade : I,II
Size :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)
C
Nonestab
2) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()
Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION
C
Nonestab
3) COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL[70]()
Specification : COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
2) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION FORG TO DRG NO 64C 3009 200 E3 MATERIAL WILL BE SUPPLIED BY OFT REQD FOR GAS PISTON C3009[00]()
Specification : AS PER DRG OF CONVERSION FORG. TO DRG.NO. 64C 3009 200 E3 MATERIAL WILL BE SUPPLIED BY OFT. REQD FOR GAS PISTON C3009
C
Nonestab
2) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
3) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Eliminator Flash()
ICR - 1576
C
Established
2) Conversion of Body()
ICR 1325
C
Established
3) Carrier Breech Block()
ICR 1268
C
Established
Category : DDP,DP
Grade : I,II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK STAGE 2 FOR K 4001, K 5001, K 6001 AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL[00]()
Specification : AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL
C
Estab
Category : DDP,DP
Grade : I,II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) RECEIVER BUSHING TO DRG NO 44P 04010 REQ FOR AMR[70]()
Specification : AS PER OFB REQ
C
Nonestab
2) FORWARD MOUNTING BLOCK TO DRG NO 44P 05103 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
3) FORWARD MOUNTING BLOCK TO DRG NO 44P 05103 ST 2[70]()
Specification : AS PER REQ
C
Nonestab
4) PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001[00]()
Specification : PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001
C
Nonestab
5) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL
C
Nonestab
6) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
7) T SLOT BRACKET TO DRG NO 44P 05106ST[70]()
Specification : AS PER OFT REQUIREMENT
R
Nonestab
8) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
9) PRE MACHINED BLANK RING MOUNT AS PER DR NO TEND 2678 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P05007[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
10) PRE MACHINED BLANK FOR RECEIVER BODY AS PER DRG NO TEND 2685 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04101[70]()
Specification : AS PER OFT REQUIRMENTS
R
Nonestab
11) PRE MACHINED BLANK FOR RECEIVER BUSHING AS PER DRG NO TEND 2682 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04010[70]()
Specification : AS PER OFT REQUIREMENT
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BULLET GUIDE AS PER DRG No.K1101 WITH FIRM MATERIAL[70]()
Specification : AS PER DRG No.K1101 WITH FIRM MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) DRIFT DIA 4 X 60MM TO DRG NO 32P 5003. REQD FOR UBGL.[42]()
Specification : AS PER DRAWING NO 32P 5003. REQD FOR UBGL
E
Nonestab
2) DRIFT TO DIA 2.4 X 35 MM TO DRG NO 32P 5002. REQD FOR UBGL[42]()
Specification : AS PER DRG NO 32P 5002. REQD FOR UBGL
E
Nonestab
3) MFG & SUPPLY OF SPRING LEVER LOCKING BARREL TO DRG NO.32P1008*5 FULLY FINISHED WITH FIRM'S MATERIAL REQUIRED FOR 40MM UBGL[70]()
Specification : AS PER DRG NO.32P1008*5
E
Nonestab
4) SEMI FINISHED BLANK PIN LEVER TRIGGER AND PIN FIRING FOR 40MM UBGL TO DRG NO. TEND 2193 WITH FIRM'MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
5) SEMI FINISHED BLANK PIN CATCH FOR 40MM UBGL TO DRG NO. TEND 2191 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
6) SEMI FINISHED BLANK PIN EXTRACTOR FOR 40MM UBGL TO DRG.NO. TEND 2192 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
7) SEMI FINISHED BLANK PIN FOR EJECTOR & SEAR FOR 40MM UBGL TO DRG NO. TEND 2190 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
8) FORE SIGHT D.S.CAT.No.: 1005-001540, D.C.No.:26763-SA DT:23/06/2015 FOR D.C.No. LATEST TO BE FOLLOWED.[70]()
Specification : AS PER D.S.CAT.No.: 1005-001540, D.C.No.:26763-SA DT:23/06/2015 FOR D.C.No. LATEST TO BE FOLLOWED.
C
Nonestab
9) NUT LOCK FORESIGHT TO DRG.NO.32P 1311*3 FOR 40MM UBGL WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
10) SUPPLY OF GUIDE RECOIL SPRING DRG.NO.32P 2102*2 FULLY FINISHED CONDITION WITH FIRM'S MATERIAL FOR UBGL[70]()
Specification : AS PER DRAWING
C
Nonestab
11) SCREW HOUSING LADDER SIGHT TO DRG NO.32P 1030*4 (FULL FINISHD) WITH FIRM'S MATERIAL FOR 40MM UBGL[70]()
Specification : AS PER DRAWING
C
Nonestab
12) MFG & SUPPLY OF LEVER LOCKING PIN TO DRG.NO 32P 4713 (M) WITH FIRM'S MATERIAL FOR UBGL[70]()
Specification : AS PER DRAWING
C
Nonestab
13) MFG & SUPPLY OF LEAF SPRING COCKING ARM TO DRG.NO.32P 4102 WITH FIRM'S MATERIAL FOR UBGL[70]()
Specification : AS PER DRAWING
C
Nonestab
14) CATCH MAGAZINE TO DRG.NO: 29P 0045* required for 0.315[03]()
Specification : AS PER DRG.NO: 29P 0045* required for 0.315" Sporting Rifle
C
Nonestab
15) COCKING PIECE TO DRG.NO.29P 0016*2 required for 0.315[70]()
Specification : AS PER DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle
C
Nonestab
16) SEAR TO DRG NO.29P 0060*2 required for 0.315[70]()
Specification : AS PER DRG NO.29P 0060*2 required for 0.315" Sporting Rifle
C
Nonestab
17) EXTRACTOR TO DRG. NO.29P 0020*2 required for 0.315[03]()
Specification : AS PER DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle
C
Nonestab
18) HEAD BREECH BOLT TO DRG. NO.TEND.2045 required for 0.315[70]()
Specification : AS PER DRG. NO.TEND.2045 required for 0.315" Sporting Rifle
C
Nonestab
19) BAND FORE SIGHT TO DRG. NO.29 P 0002* required for 0.315[70]()
Specification : AS PER DRG. NO.29 P 0002* required for 0.315" Sporting Rifle
C
Nonestab
20) PIN TRIGGER TO DRG NO.: 29P 0041* required for 0.315[70]()
Specification : AS PER DRG NO.: 29P 0041* required for 0.315" Sporting Rifle
C
Nonestab
21) BLADE FORE SIGHT 29P 0004* required for 0.315[70]()
Specification : AS PER DRG. No.29P 0004* required for 0.315" Sporting Rifle
C
Nonestab
22) SCREW BAND INNER TO DRG. NO.29P 0051* required for 0.315[70]()
Specification : AS PER DRG. NO.29P 0051* required for 0.315" Sporting Rifle
C
Nonestab
23) PIN FIXING BAND BACK SIGHT TO DRG.No.: 29P 0006 required for 0.315[70]()
Specification : AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle
C
Nonestab
24) SCREW PLATE BUTT TO DRG.NO. 29P 0059* required for 0.315[70]()
Specification : AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle
C
Nonestab
25) BOLT BREECH FORGING TO DRG NO,TEND 1818*(MODIFIED) required for 0.315[70]()
Specification : AS PER DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle
C
Nonestab
26) CONVERSION OF BOLT BREECH FROM FORGING TO DRG.NO.29P 0013* (M) required for 0.315[00]()
Specification : AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle
C
Nonestab
27) BOLT GRIP PISTOL AS PER DRG No. K 1027 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Nonestab
28) FIRING PIN AS PER DRG No. K 2015 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL
C
Nonestab
29) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No. K 2031 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 2031 WITH FIRM'S MATERIAL
C
Nonestab
30) SELECTOR LEVER AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL
C
Nonestab
31) DRIFT AS PER DRG No. K 9004 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 9004 WITH FIRM'S MATERIAL
C
Nonestab
32) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL
C
Nonestab
33) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL
C
Nonestab
34) SUPPLY OF HAMMER AS PER DRG NO K -2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
35) BOLT CARRIER BLANK AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL
C
Nonestab
36) SUPPLY OF TRIGGER AS PER DRG NO K-2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Nonestab
37) WASHER SPRING SINGLE COIL TYPE B STEEL ZINC PLATED (NOMINAL SIZE)6MM CAT/PT.NO.G1/5310-001434 SPECN.IS:3063:1972 & SS NO.CIGS/SS/173(D).THICKNESS OF ZINC PLATING TO IS 1573-1970 SERVICE CONDN.NO.1(GR.FE ZN 5)CHROMEPASSIVATED[17]()
Specification : AS PER DRG
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK STAGE 2 FOR K 4001, K 5001, K 6001 AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL[00]()
Specification : AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL
C
Estab
2) SUPPLY OF COMPENSATOR AS PER DRG NO.K-1021 WITH FIRMSMATERIAL[70]()
Specification : AS PER DRG NO.K-1021 WITH FIRMSMATERIAL
C
Estab
3) SUPPLY OF REAR SIGHT LEAF[70]()
Specification : AS PER DRG NO.K-2021 WITH FIRMS MATERIAL
C
Estab
4) CLEANING ROD AS PER DRG No. K 9011 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 9011 WITH FIRM'S MATERIAL
E
Estab
5) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No. K 2031 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 2031 WITH FIRM'S MATERIAL
C
Nonestab
2) SELECTOR LEVER AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Estab
3) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Estab
4) STUD AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Estab
5) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()
Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Estab
2) LOWER HAND GUARD BAND AS PER DRG NO K 1204 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 1204 WITH FIRMS MATERIAL
C
Estab
3) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Estab
4) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Estab
5) BULLET GUIDE AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Estab
6) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Estab
7) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG NO K 2012[70]()
Specification : AS PER DRG. NO. K 2012
C
Estab
8) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]()
Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle
E
Nonestab
2) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA
C
Nonestab
3) MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK STAGE 2 FOR K 4001 AS PER DRG NO TEND 2449STR2 WITH OFT RAW MATERIAL[70]()
Specification : AS PER DRG NO.TEND 2449*2 WITH OFT
RAW MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT SIGHT BLOCK BLANK S3 (L.F.No.7024012072)[70]()
Specification : AS ER DRG No.TEND 2508 (for K 1207)
R
Nonestab
2) REAR SIGHT BLOCK BLANK FOR TAR (L.F. No.7024012073)[70]()
Specification : AS PER DRG No.TEND :2509 (for K-1202)
C
Nonestab
3) AUTO SEAR BLANK FOR ASSAULT RIFLE ( L.F.No.7024002517)[70]()
Specification : As per Drg. No.TEND 2517 (for K 2067)
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK S 2 TO DRG NOTEND 2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY[70]()
Specification : PRE MACHINED BLANK S-2 TO DRG.NO.TEND2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Block Gas to ICR 1322 with OFT material[70]()
Specification : Block Gas to drawing No. ICR 1322 DS CAT No/1005-001510, DC No. 26759-SA dated 29.05. 215 with OFT mtl
C
Nonestab
2) SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290[70]()
Specification : SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470[70]()
Specification : CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470
C
Nonestab
2) MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING RAIL for JVPC[70]()
Specification : MOUNTING RAIL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Barrel Extension Blank up to Stage V for JVPC[70]()
Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143[04]()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
C
Estab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BLOCK GAS IN FINISH CONDITION FOR MAG[70]()
Specification : BLOCK GAS IN FINISH CONDITION AS PER D.S.CAT NO;1005-006815 FOR MAG 7.62MM (BORE SIZE DIA 23.021 TO 23.037MM)
C
Nonestab
2) Receiver Body for 9X19 mm Machine Pistol[70]()
Specification : Receiver Body for 9X19 mm Machine Pistol as per Drawing
C
Nonestab
3) FEED TRAY INTEGRATED FOR LMG BELT FED[70]()
Specification : FEED TRAY INTEGRATED AS PER DRG.NO. 1804 01 05 00 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
C
Nonestab
4) CYLINDER GAS FOR LMG BELT FED[70]()
Specification : CYLINDER GAS AS PER DRG.NO.1804 01 01 01 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
C
Nonestab
5) Barrel Mount for 9X19 mm Machine Pistol[70]()
Specification : Barrel Mount for 9X19 mm Machine Pistol as per drawing
R
Nonestab
6) Locking Rear Block for 9X19 mm Machine Pistol[70]()
Specification : Locking Rear Block for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 00 002 00DA
C
Nonestab
7) Rear sight for 9X19 mm Machine Pistol[70]()
Specification : Rear sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 012 00DA
C
Nonestab
8) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
9) SIGHT LEAF DRG No SK 6540 TE[70]()
Specification : SIGHT LEAF DRG No SK-6540/TE
C
Nonestab
10) SLIDE DRG No SK 6534 TE[70]()
Specification : SLIDE DRG No SK-6534/TE
C
Nonestab
11) LATCH DRG No SK 6535 TE[70]()
Specification : LATCH DRG No SK- 6535 /TE
C
Nonestab
12) Cleaning Rod Drg No SK 6574 TE[70]()
Specification : Cleaning Rod Drg No. SK- 6574/ TE
C
Nonestab
13) RAIL SK 6548 TE[70]()
Specification : RAIL SK-6548/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF INPUT BLANK AS PER DRG NO TEND 2656 STAR2 WITH OFT MATERIAL FOR TAR BOLT K2011STAR3[70]()
Specification : MANUFACTURING AND SUPPLY OF INPUT BLANK AS PER DRG NO TEND 2656 STAR2 WITH OFT MATERIAL FOR TAR BOLT K2011STAR3
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MACHINING OF HAMMER TO DS CAT NO 1005 001631 DC NO 27070 SA DT 05 05 2017 FROM OFT ISSUED FORGINGS REQUIRED IN FULLY FINISHED CONDITION ICR 1256[70]()
Specification : MACHINING OF HAMMER TO DS CAT NO 1005 001631 DC NO 27070 SA DT 05 05 2017 FROM OFT ISSUED FORGINGS REQUIRED IN FULLY FINISHED CONDITION ICR 1256
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SEAR SAFETY ICR 1281 L F 7011606010[70]()
Specification : AS PER DRAWING
C
Nonestab
2) BLOCK HOUSING TO DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302[70]()
Specification : AS PER DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1023
B B Investment Casting
Plot no : 2205 / 2206, Road no : A, Metoda GIDC, Metoda Dist : Rajkot Road no - A At : Metoda, Dist : Rajkot Gujarat
PIN1 : 360021
Phone No. : 287897 GSTIN : 24AAGFB6578C1ZK
Specification : INVESTMENT CASTING TO RFI SK. NO. 6097*12 FOR HINGE COVER.FOR RLFLE 5.56MM INSAS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG NO RFI SK 8972 G FOR 12 BORE PUMP ACTION GUN[70]()
Specification : INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG.NORFI.SK-8972-G. FOR 12 BORE PUMP ACTION GUN
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG. NO. TEND 2206 * 2 REQD. FOR TRIGGER TO DRG.NO.30P 3051 FOR 40 mm MGL.[70]()
Specification : AS PER DRAWING AND SPECIFICATION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG NO TEND 1805STAR2 FOR SLIDE COCKING HANDLE ICR 1290[70]()
Specification : AS PER INVESTMENT CASTING TO DRG. NO. TEND 1805*2 FOR SLIDE COCKING HANDLE (ICR-1290).
C
Nonestab
2) CATCH MAGAZINE INVESTMENT CASTING DS CAT NO 1005 001539 TO DRG NO TEND 1874 ICR 1199 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO TEND.1874. (ICR-1199) (WITH FIRM'S MATERIAL)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG. NO. TEND 2209 ST FOR BLOCK STOCK TO DRG. NO. 30P 5001 FOR 4mm MGL.[70]()
Specification : AS PER DRAWING AND SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUARD TRIGGER INVESTMENT CASTING TO DRG.NO.RFI.SK-4312*12 required for 0.315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle
C
Nonestab
2) INVESTMENT CASTING TO TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315 SPORTING RIFLE (29P00005*)[70]()
Specification : AS PER TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG.NO. TEND 2211*3 REQUIRED FOR PLATE INDEX TO DRG. NO. 30P 1214[70]()
Specification : As per the Drawing and Specification
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Investment casting to DRG. No. TEND 2210*2. Reqd. for HOUSING PLUG GAS to DRG. No. 30P 1401 for 40mm MGL[70]()
Specification : As per Drawing
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG No 64C 2026 250 G3 REQUIRED FOR HOLDER TO DRG No 2A42 02 026 C2026[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 2026 250 G3.
REQUIRED FOR HOLDER TO DRG.No.: 2A42.02.026 (C2026).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG NO TEND 1805STAR2 FOR SLIDE COCKING HANDLE ICR 1290[70]()
Specification : AS PER INVESTMENT CASTING TO DRG. NO. TEND 1805*2 FOR SLIDE COCKING HANDLE (ICR-1290).
C
Nonestab
2) CATCH MAGAZINE INVESTMENT CASTING DS CAT NO 1005 001539 TO DRG NO TEND 1874 ICR 1199 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO TEND.1874. (ICR-1199) (WITH FIRM'S MATERIAL)
C
Nonestab
3) Bar locking Slider C1058[70]()
Specification : Bar locking Slider C1058
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Barrel Extension Assembly[74]()
Specification : Barrel Extension Assembly, HB, OOW50BMG AS PER DRG NO: 5504082 OF M2HB GUN
E
Nonestab
2) COVER ASSEMBLY[74]()
Specification : COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN
E
Nonestab
3) Pin Assembly Trigger Bar of M2HB Gun[74]()
Specification : Pin Assembly, Trigger Bar, OOW50BMG as per Drawing No. 7313106 of M2HB Gun
C
Nonestab
4) Pin Assembly Breech Lock of M2HB Gun[74]()
Specification : Pin Assembly, Breech Lock, OOW50BMG as per Drawing No. 6008784 of M2HB Gun
C
Nonestab
5) Cover Front Sight OOW50BMG as per Drawing No 6008935 of M2HB Gun[74]()
Specification : Cover Front Sight OOW50BMG as per Drawing No 6008935 of M2HB Gun
C
Nonestab
6) Blade Front Sight OOW50BMG as per Drawing No 6008934 of M2HB Gun[74]()
Specification : Blade, Front Sight, OOW50BMG as per Drawing No. 6008934 of M2HB Gun
C
Nonestab
7) Pawl Cover Detent OOW50BMG as per Drawing No 7313069 of M2HB Gun[74]()
Specification : Pawl, Cover Detent, OOW50BMG as per Drawing No. 7313069 of M2HB Gun
C
Nonestab
8) Screw Externally relieved Body OOW50BMG as per Drawing No 7312028 of M2HB Gun[74]()
Specification : Screw, Externally relieved Body, OOW50BMG as per Drawing No. 7312028 of M2HB Gun
C
Nonestab
9) Screw Machine Flat Countersunk Head OOW50BMG as per Drawing No 5153191 of M2HB Gun[74]()
Specification : Screw, Machine, Flat Countersunk Head, OOW50BMG as per Drawing No. 5153191 of M2HB Gun
C
Nonestab
10) Spring Locking Barrel OOW50BMG as per Drawing No 7266134 of M2HB Gun[74]()
Specification : Spring, Locking Barrel, OOW50BMG as per Drawing No. 7266134 of M2HB Gun
C
Nonestab
11) Screw Lock Breech Bearing OOW50BMG as per Drawing No 5013530 of M2HB Gun[74]()
Specification : Screw Lock, Breech Bearing, OOW50BMG as per Drawing No. 5013530 of M2HB Gun
C
Nonestab
12) Nut Bolt Latch Rod OOW50BMG as per Drawing No 5013526 of M2HB Gun[74]()
Specification : Nut, Bolt Latch Rod, OOW50BMG as per Drawing No. 5013526 of M2HB Gun
C
Nonestab
13) Peel Away Shim Trunnion Block OOW50BMG as per Drawing No 6008982 PA of M2HB Gun[74]()
Specification : Peel Away Shim, Trunnion Block, OOW50BMG as per Drawing No. 6008982-PA of M2HB Gun
C
Nonestab
14) Pin Belt Holding Pawl OOW50BMG as per Drawing No 7162872 of M2HB Gun[74]()
Specification : Pin, Belt Holding Pawl, OOW50BMG as per Drawing No. 7162872 of M2HB Gun
C
Nonestab
15) Bearing Breech OOW50BMG as per Drawing No 6008920 of M2HB Gun[74]()
Specification : Bearing, Breech, OOW50BMG as per Drawing No. 6008920 of M2HB Gun
C
Nonestab
16) Screw Breech Lock Cam OOW50BMG as per Drawing No 5152938 of M2HB Gun[74]()
Specification : Screw, Breech Lock Cam, OOW50BMG as per Drawing No. 5152938 of M2HB Gun
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUARD TRIGGER INVESTMENT CASTING TO DRG.NO.RFI.SK-4312*12 required for 0.315[70]()
Specification : AS PER DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle
C
Nonestab
2) INVESTMENT CASTING TO TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315[70]()
Specification : AS PER TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG NO TEND 1805STAR2 FOR SLIDE COCKING HANDLE ICR 1290[70]()
Specification : AS PER INVESTMENT CASTING TO DRG. NO. TEND 1805*2 FOR SLIDE COCKING HANDLE (ICR-1290).
C
Nonestab
2) CATCH MAGAZINE INVESTMENT CASTING DS CAT NO 1005 001539 TO DRG NO TEND 1874 ICR 1199 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO TEND.1874. (ICR-1199) (WITH FIRM'S MATERIAL)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG No 64C 2026 250 G3 REQUIRED FOR HOLDER TO DRG No 2A42 02 026 C2026[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 2026 250 G3.
REQUIRED FOR HOLDER TO DRG.No.: 2A42.02.026 (C2026).
C
Nonestab
2) INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.021 (C5021).[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.021 (C5021).
C
Nonestab
3) INVESTMENT CASTING TO DRG No 64C 5021 250 I3 REQUIRED FOR PAWL TO DRG NO 2A42 05 024 C5024[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.024 (C5024).
C
Nonestab
4) INVESTMENT CASTING TO DRGNo 64C 5028 250 H3 REQD FOR CONNECTING LINK RIGID DRG No 2A42 05 028 C5028[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5028 250 H3. REQD FOR CONNECTING LINK RIGID (DRG.No. 2A42.05.028) (C5028)
C
Nonestab
5) INVESTMENT CASTING TO DRG NO 64C 5089 250 G3 REQD FOR CATCH BODY TO DRG NO 2A42 05 089 C5089[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG NO 64C 5089 250 G3.
REQD FOR: CATCH BODY TO DRG NO 2A42.05.089 (C5089)
C
Nonestab
6) INVESTMENT CASTING TO DRG No 64C 5111 250 K3 ALT REQUIRED FOR HANDLE TO DRG No 2A42 05 111 C5111[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5111 250 K3 ALT. REQUIRED FOR HANDLE TO DRG.No. 2A42 05 111 (C5111)
C
Nonestab
7) INVESTMENT CASTING TO DRG No 64C 5112 250 G3 REQUIRED FOR CONNECTING LINK RIGID DRG NO 2A42 05 112[42]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5112 250 G3. REQUIRED FOR CONNECTING LINK, RIGID (DRG.NO.2A42 05 112)
S
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG No 62C 1013 250 D3 SLEEVE HANDLE BASE BARREL FOR 12 7mm A D GUN A 1013[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN.
A 1013
"
C
Nonestab
2) INVESTMENT CASTING TO DRG No 62C 1012 250 E3 FOR FLASH HIDER[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1012 250 E3. FOR FLASH HIDER
"
C
Nonestab
3) INVESTMENT CASTING TO DRG.No.: 62C 6019 250 F3 FOR BRACKET HOLDING FRONT COVER.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 6019 250 F3 FOR BRACKET HOLDING FRONT COVER.
"
C
Nonestab
4) INVESTMENT CASTING TO DRG No 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT
"
C
Nonestab
5) INVESTMENT CASTING TO DRG.NO.62C 6023 250 E3 CATCH FRICTION COVER FEED (A 6023) FOR 12.7 MM AD GUN.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.NO.62C 6023 250 E3 CATCH FRICTION COVER FEED (A 6023)
FOR 12.7 MM AD GUN.
"
C
Nonestab
6) INVESTMENT CASTING TO DRG.No.: 62C 7101 250 J3. FOR BODY TRIGGER MECHANISM (A7101) OF 12.7mm A.D. GUN.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 7101 250 J3. FOR BODY TRIGGER MECHANISM (A7101) OF 12.7mm A.D. GUN.
"
C
Nonestab
7) INVESTMENT CASTING TO DRG NO. 62C 7009 250 F3 LEVER SEAR FOR 12.7 A.D. GUN.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG NO. 62C 7009 250 F3 LEVER SEAR FOR 12.7 A.D. GUN.
"
C
Nonestab
8) INVESTMENT CASTING TO DRG.NO.62C 6025 250 F3. HANDLE CATCH FRICTION (A 6025)[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.NO.62C 6025 250 F3. HANDLE CATCH FRICTION (A 6025)
"
C
Nonestab
9) INVESTMENT CASTING TO DRG.No.: 62C 6022 250 E3 FOR BLOCK GUIDE LEVER FEED. (A6022)[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 6022 250 E3 FOR BLOCK GUIDE LEVER FEED. (A6022)
"
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLEEVE LIMITER[74]()
Specification : SLEEVE LIMITER (View)066427A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
2) PIN FRONT 1 ASSY[74]()
Specification : PIN FRONT 1 ASSY (VIEW)077901A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
3) PIN REAR 1[74]()
Specification : PIN REAR 1 (VIEW) 077902A-00PIN FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
4) BASE BLOCK[74]()
Specification : BASE BLOCK/065286A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
5) PUSHER TRIGGER[74]()
Specification : PUSHER TRIGGER (View)Y05288A-01 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
6) Barrel Extension Assembly[74]()
Specification : Barrel Extension Assembly, HB, OOW50BMG AS PER DRG NO: 5504082 OF M2HB GUN
E
Nonestab
7) COVER ASSEMBLY[74]()
Specification : COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN
E
Nonestab
8) SLIDE ASSEMBLY RETRACTING[74]()
Specification : SLIDE ASSEMBLY RETRACTING, OOW50BMG AS PER DRG NO: 11010439 OF M2HB GUN
E
Nonestab
9) Pin Assembly Trigger Bar of M2HB Gun[74]()
Specification : Pin Assembly, Trigger Bar, OOW50BMG as per Drawing No. 7313106 of M2HB Gun
C
Nonestab
10) Pin Assembly Breech Lock of M2HB Gun[74]()
Specification : Pin Assembly, Breech Lock, OOW50BMG as per Drawing No. 6008784 of M2HB Gun
C
Nonestab
11) Cover Front Sight OOW50BMG as per Drawing No 6008935 of M2HB Gun[74]()
Specification : Cover Front Sight OOW50BMG as per Drawing No 6008935 of M2HB Gun
C
Nonestab
12) Blade Front Sight OOW50BMG as per Drawing No 6008934 of M2HB Gun[74]()
Specification : Blade, Front Sight, OOW50BMG as per Drawing No. 6008934 of M2HB Gun
C
Nonestab
13) Pawl Cover Detent OOW50BMG as per Drawing No 7313069 of M2HB Gun[74]()
Specification : Pawl, Cover Detent, OOW50BMG as per Drawing No. 7313069 of M2HB Gun
C
Nonestab
14) Screw Externally relieved Body OOW50BMG as per Drawing No 7312028 of M2HB Gun[74]()
Specification : Screw, Externally relieved Body, OOW50BMG as per Drawing No. 7312028 of M2HB Gun
C
Nonestab
15) Spring Locking Barrel OOW50BMG as per Drawing No 7266134 of M2HB Gun[74]()
Specification : Spring, Locking Barrel, OOW50BMG as per Drawing No. 7266134 of M2HB Gun
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG No 64C 2028 250 J3 REQUIRED FOR BRAKE TO DRG No 2A42 02 028 C2028[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 2028 250 J3.
REQUIRED FOR: BRAKE TO DRG.No.: 2A42.02.028 (C2028)
C
Nonestab
2) TRIGGER TO DRG NO 44P 06008 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
3) CATCH MAGAZINE[70]()
Specification : AS PER DRAWING
C
Nonestab
4) IC FRONT SIGHT BLOCK AS PER DRG NO IC K 1207[70]()
Specification : IC FRONT SIGHT BLOCK AS PER DRG NO. IC K 1207 FOR 7.62 MM TAR
R
Nonestab
5) Barrel Extension Assembly[74]()
Specification : Barrel Extension Assembly, HB, OOW50BMG AS PER DRG NO: 5504082 OF M2HB GUN
E
Nonestab
6) COVER ASSEMBLY[74]()
Specification : COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN
E
Nonestab
7) SLIDE ASSEMBLY RETRACTING[74]()
Specification : SLIDE ASSEMBLY RETRACTING, OOW50BMG AS PER DRG NO: 11010439 OF M2HB GUN
E
Nonestab
8) Pin Assembly Trigger Bar of M2HB Gun[74]()
Specification : Pin Assembly, Trigger Bar, OOW50BMG as per Drawing No. 7313106 of M2HB Gun
C
Nonestab
9) Pin Assembly Breech Lock of M2HB Gun[74]()
Specification : Pin Assembly, Breech Lock, OOW50BMG as per Drawing No. 6008784 of M2HB Gun
C
Nonestab
10) Screw Lock Breech Bearing OOW50BMG as per Drawing No 5013530 of M2HB Gun[74]()
Specification : Screw Lock, Breech Bearing, OOW50BMG as per Drawing No. 5013530 of M2HB Gun
C
Nonestab
11) Pin Belt Holding Pawl OOW50BMG as per Drawing No 7162872 of M2HB Gun[74]()
Specification : Pin, Belt Holding Pawl, OOW50BMG as per Drawing No. 7162872 of M2HB Gun
C
Nonestab
12) Bearing Breech OOW50BMG as per Drawing No 6008920 of M2HB Gun[74]()
Specification : Bearing, Breech, OOW50BMG as per Drawing No. 6008920 of M2HB Gun
C
Nonestab
13) Assembly Carrying Handle OOW50BMG as per drawing no 10208111 of M2HB GUN[74]()
Specification : Assembly Carrying Handle, OOW50BMG as per drawing no.: 10208111 of M2HB GUN
C
Nonestab
14) Pawl Assembly Belt Holding[74]()
Specification : Pawl Assembly, Belt Holding, OOW50BMG as per Drawing No.: 7313083 of M2HB GUN
C
Nonestab
15) Rear Sight Assembly OOW50BMG as per Drawing No 12003047 of M2HB GUN[74]()
Specification : Rear Sight Assembly, OOW50BMG as per Drawing No.: 12003047 of M2HB GUN
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUARD TRIGGER INVESTMENT CASTING TO DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC TO DRG.NO.:TEND.920 D FOR TRIGGER.[70]()
Specification : AS PER DRG No.TEND 920D ICR -1238
C
Nonestab
2) IC TO DRG NO TEND 1100 D FOR RAMP BACKSIGHT ICR 1253[70]()
Specification : AS PER DRG NO.:TEND 1100 D FOR RAMP BACKSIGHT(ICR-1253)
C
Nonestab
3) IC TO DRG NO TEND 658 G FOR LEVER CHANGE ICR 1312 WTIH FIRMS MATERIAL[70]()
Specification : AS PER DRG.NO.:TEND.658 G FOR LEVER CHANGE. (ICR-1312)(WTIH FIRM'S MATERIAL)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC TO DRG NO TEND 255E FOR LOCATING PIECE ICR1505[70]()
Specification : AS PER IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)
C
Nonestab
2) IC FRONT SIGHT BLOCK AS PER DRG NO IC K 1207[70]()
Specification : IC FRONT SIGHT BLOCK AS PER DRG NO. IC K 1207 FOR 7.62 MM TAR
R
Nonestab
3) PREMACHINED BLANK FOR M2HB GUN BLOCK TRUNNION OO50BMG AS PER DRG NO TEND 2672[74]()
Specification : PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672
C
Nonestab
4) PREMACHINED BLANK FOR M2HB GUN BOLT ALTERNATE FEED OO50BMG AS PER DRG NO TEND 2670[74]()
Specification : PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670
C
Nonestab
5) MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG NO TEND 1805STAR2 FOR SLIDE COCKING HANDLE ICR 1290[70]()
Specification : AS PER INVESTMENT CASTING TO DRG. NO. TEND 1805*2 FOR SLIDE COCKING HANDLE (ICR-1290).
C
Nonestab
2) INVESTMENT CASTING TO DRG No 62C 1013 250 D3 SLEEVE HANDLE BASE BARREL FOR 12 7mm A D GUN A 1013[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN.
A 1013
"
C
Nonestab
3) TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025[70]()
Specification : TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Cover Front Sight OOW50BMG as per Drawing No 6008935 of M2HB Gun[74]()
Specification : Cover Front Sight OOW50BMG as per Drawing No 6008935 of M2HB Gun
C
Nonestab
2) Assembly Carrying Handle OOW50BMG as per drawing no 10208111 of M2HB GUN[74]()
Specification : Assembly Carrying Handle, OOW50BMG as per drawing no.: 10208111 of M2HB GUN
C
Nonestab
3) Rear Sight Assembly OOW50BMG as per Drawing No 12003047 of M2HB GUN[74]()
Specification : Rear Sight Assembly, OOW50BMG as per Drawing No.: 12003047 of M2HB GUN
C
Nonestab
4) Shank Barrel Extension LH OOW50BMG as per Drg No 6009728 of M2HB Gun[74]()
Specification : Shank Barrel Extension LH OOW50BMG as per Drg No 6009728 of M2HB Gun
C
Nonestab
5) Slide Retracting OOW50BMG as per Drg No 6147893 of M2HB Gun[74]()
Specification : Slide Retracting OOW50BMG as per Drg No 6147893 of M2HB Gun
C
Nonestab
6) Latch Back Plate OOW50BMG as per Drg No 6008949 of M2HB Gun[74]()
Specification : Latch Back Plate OOW50BMG as per Drg No 6008949 of M2HB Gun
C
Nonestab
7) Pawl Aligning Cartridge OOW50BMG as per Drg No 6008975 of M2HB Gun[74]()
Specification : Pawl Aligning Cartridge OOW50BMG as per Drg No 6008975 of M2HB Gun
C
Nonestab
8) Bracket Cover OOW50BMG as per Drg No 5152752 of M2HB Gun[74]()
Specification : Bracket Cover OOW50BMG as per Drg No 5152752 of M2HB Gun
C
Nonestab
9) Latch Cover OOW50BMG as per Drg No 6008928 of M2HB Gun[74]()
Specification : Latch Cover OOW50BMG as per Drg No 6008928 of M2HB Gun
C
Nonestab
10) Back Plate Latch OOW50BMG as per Drg No 11010453 of M2HB Gun[74]()
Specification : Back Plate Latch OOW50BMG as per Drg No 11010453 of M2HB Gun
C
Nonestab
11) Plate Buffer OOW50BMG as per Drg No 5152869 of M2HB Gun[74]()
Specification : Plate Buffer OOW50BMG as per Drg No 5152869 of M2HB Gun
C
Nonestab
12) Switch Bolt OOW50BMG as per Drg No 5504062 of M2HB Gun[74]()
Specification : Switch Bolt OOW50BMG as per Drg No 5504062 of M2HB Gun
C
Nonestab
13) Bracket Belt Holding Pawl LH OOW50BMG as per Drg No 5504059 of M2HB Gun[74]()
Specification : Bracket Belt Holding Pawl LH OOW50BMG as per Drg No 5504059 of M2HB Gun
C
Nonestab
14) Bracket Belt Holding Pawl RH OOW50BMG as per Drg No 6128730 of M2HB Gun[74]()
Specification : Bracket Belt Holding Pawl RH OOW50BMG as per Drg No 6128730 of M2HB Gun
C
Nonestab
15) Cam Extractor Cover OOW50BMG as per Drg No 5564279 of M2HB Gun[74]()
Specification : Cam Extractor Cover OOW50BMG as per Drg No 5564279 of M2HB Gun
C
Nonestab
16) Bracket Bolt Latch OOW50BMG as per Drg No 5504061 of M2HB Gun[74]()
Specification : Bracket Bolt Latch OOW50BMG as per Drg No 5504061 of M2HB Gun
C
Nonestab
17) Arm Belt Feed Pawl OOW50BMG as per Drg No 6008914 of M2HB Gun[74]()
Specification : Arm Belt Feed Pawl OOW50BMG as per Drg No 6008914 of M2HB Gun
C
Nonestab
18) Extractor OOW50BMG as per Drg No 5504065 of M2HB Gun[74]()
Specification : Extractor OOW50BMG as per Drg No 5504065 of M2HB Gun
C
Nonestab
19) Lever Cocking OOW50BMG as per Drg No 6009718 of M2HB Gun[74]()
Specification : Lever Cocking OOW50BMG as per Drg No 6009718 of M2HB Gun
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SAFETY LEVER WITHOUT NICKEL PLATING TO DRG NO CTM 0154 THROUGH INVESTMENT CASTING ROUTE IN FC[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5[70]()
Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BLOCK BREECH ICR 1261 DS CAT NO 1005 001570 DC NO 25103 SA DT 23 08 2001 FULLY FINISHED CONDITION WITH FIRM MATERIAL[70]()
Specification : AS PER (ICR - 1261) DS CAT NO.1005-001570 DC NO.25103-SA DT.23.08.2001 (ASFULLY FINISHED CONDITION WITH FIRM MATERIAL)
C
Nonestab
2) IC TO DRG NO TEND 255E FOR LOCATING PIECE ICR1505[70]()
Specification : AS PER IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)
C
Nonestab
3) IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 STAR 4[70]()
Specification : IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 STAR 4
C
Nonestab
4) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()
Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL
C
Nonestab
5) MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INPUT BLANKS OF BLOCK GAS TO TEND 1966STAR WITH FIRMS MATERIAL FOR RIFLE 7POINT62 1A1 ICR 1322[70]()
Specification : AS PER TEND 1966* WITH FIRMS MATERIAL FOR RIFLE 7.62 1A1 (ICR- 1322)
C
Nonestab
2) IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 STAR 4[70]()
Specification : IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 STAR 4
C
Nonestab
3) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
4) IC FRONT SIGHT BLOCK AS PER DRG NO IC K 1207[70]()
Specification : IC FRONT SIGHT BLOCK AS PER DRG NO. IC K 1207 FOR 7.62 MM TAR
R
Nonestab
5) PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR[70]()
Specification : PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
2) Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material[70]()
Specification : Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()
Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION
C
Nonestab
2) MANUFACTURING AND SUPPLY OF PAWL TO DRG NO C5096 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL LATEST TO BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
3) PAWL TO DRG NO C1024 WITH FIRMS MATERIAL IN FULLY FINISHED AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
4) CONNECTING LINK RIGID TO DRG NO C5028 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
5) CONNECTING LINK RIGID TO DRG NO 5112 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) STUD AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF FORGING FOR BODY TO DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.[70]()
Specification : AS PER DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) C5087 CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) HANDLE TO DRG NO C5073 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
2) MANUFACTURING AND SUPPLY OF HANDLE IN FULLY FINISHED CONDITION TO DRG No C1096 WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SEAR TO DRG No 2A42 05 029 C5029 WITH FIRMS MATERIAL DSCAT NO 1005 560073 ITEM TO BE MANUFACTURED THROUGH FORGING ROUTE REFER FORGING TO DRG NO 64C 5029 200 C3 LATEST DC TO BE FOLLOWED LATESE DC NO19118 DT 18 03 2008[70]()
Specification : As per TE
C
Nonestab
2) ROCKER TO DRG NO C5025 IN FULLY FINISHED WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH FORGING ROUTE DRG NO 64C 5025 200 E3 REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
3) CONNECTING LINK RIGID IN FULLY FINISHED TO DRG NO C5056 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH FORGING ROUTE DRG NO 64C 5056 200 F3 REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
4) C1005 STRIP FULLY FINISHED THROUGH FORGING ROUTE DRG NO 64C 1005 200 F3 WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()
Specification : As per TE
C
Nonestab
5) C2003 SHIELD FULLY FINISHED THROUGH FORGING ROUTE TEND 2096 WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2726 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM BARREL CATCH C2037 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2037 200 E3[70]()
Specification : As per TE
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PAWL TO DRG NO C1039 1 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30 MM CANNON[70]()
Specification : As per TE
C
Nonestab
2) MANUFACTURING AND SUPPLY OF C1092 F STRIPER TEND 2739 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
3) MANUFACTURING AND SUPPLY OF C1093 R STRIPER AS PER DRG NO TEND 2740 WITH OFT MATERIAL SEMI FINISHED[70]()
1) CONTAINER EXPLODER MCD 450 KG L F NO 6230701104[62]()
Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG.NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED]
C
Nonestab
2) CONTAINER EXPLODER 1000 LBS L F NO 6224121300[62]()
Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED]
C
Estab
Category :
Grade : Grade III
Size :
M
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 7110302037 FORGING FOR HUB CARRIER TO DRG NO P155 HRG 1001 3 FOR PROJECT DHANUSH[71]()
Specification : AS PER DRG. NO: P155-HRG-1001-3
R
Nonestab
2) 7110302036 FORGING FOR GEAR RING CARRIER TO DRG NO P155 HRG 3014 3 FOR PROJECT DHANUSH[71]()
Specification : FORGING FOR GEAR RING CARRIER TO DRG. NO: P155-HRG-3014-3 FOR PROJECT DHANUSH.
R
Nonestab
3) 7110302035 FORGING FOR PIN TO DRG NO P155 HRG 3012 3 FOR PROJECT DHANUSH[71]()
Specification : FORGING FOR PIN TO DRG. NO: P155-HRG-3012-3 FOR PROJECT DHANUSH.
R
Nonestab
4) 7110302032 FORGING FOR GEAR RING TO DRG NO P155 HRG 3011 3 FOR PROJECT DHANUSH[71]()
Specification : FORGING FOR GEAR RING TO DRG. NO: P155-HRG-3011-3 FOR PROJECT DHANUSH
R
Nonestab
5) 7110302034 FORGING FOR PLANETARY PINION TO DRG NO P155 HRG 3002 3 FOR PROJECT DHANUSH[71]()
Specification : FORGING FOR PLANETARY PINION TO DRG. NO: P155-HRG-3002-3 FOR PROJECT DHANUSH.
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) TORSION BAR RH & LH()
DRG.NO.175.51.016-1/RH & 172.51.016-1/LH
C
NOT ESTABLISHED
2) RING()
DRG.NO.172.51.020/F
R
NOT ESTABLISHED
3) BUSH()
DRG.NO.172.51.026/F
C
Non Established
4) COVER()
DRG.NO.172.52.127
C
Non Established
5) GEAR, BEVEL, DRIVEN()
DRG.NO.172.41.082/F
C
Non Established
6) BUSHING INNER()
DRG.NO.172.2M.52.004/F
C
Non Established
7) REQUIREMENT OF FORGINGS (FOR 1KG TO 50KG)()
AS PER DRG
C
Non Established
Category : DDP,DP
Grade : I
Size :
M
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) TOP PLUG ()
OFAJ DRG.NO:S-78C (REF. DRG.NO. 4079922, DC NO. 36817-A,DT.08.03.2002,DULY SURFACE TREATED AS PER DRG.NO.5191819, DC NO.34810-A, DT.05.03.90 ](PRF FOR 155MM M-107 & M77B )
C
Not Estab.
Category : DDP,DP
Grade : I
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FORGED BODY (FRONT PART) TO OFAJ DRG. NO. F-9G FOR 81 mm MORTAR BOMB (EMPTY BODY)[62]()
Specification : FORGED BODY (FRONT PART) TO OFAJ DRG. NO. F-9G FOR 81 mm MORTAR BOMB (EMPTY BODY)
R
Nonestab
2) PROOF MACHINED BODY FOR 51 MM HE to DRG NO SK 8345 C[62]()
Specification : PROOF MACHINED BODY FOR 51 MM HE to DRG NO SK 8345 C
4) SHUTTER HOUSING TO DRG NO 9102 00 03 01 09 001 00DB[62]()
Specification : AS PER DRG
C
Nonestab
5) GRENADE BODY BLANK TO GSF DRG NO M 11220[62]()
Specification : AS PER DRAWING
R
Nonestab
6) SAFETY LEVER WITHOUT NICKEL PLATING TO DRG NO CTM 0154 THROUGH INVESTMENT CASTING ROUTE IN FC[70]()
Specification : AS PER DRAWING
C
Nonestab
7) NUT TO DET NO 2 16 OF DRG NO 3 024045 IN FC TO SK NO OTF DD 006[64]()
Specification : NUT TO DET NO 2-16 OF DRG NO 3-024045 IN FINISH CONDITION TO SK NO OTF/DD/006
C
Nonestab
8) FORGED BODY MATERIAL TO GSF SKETCH NO F 2344 FOR 125 MM HEAT AMMUNITION[62]()
Specification : FORGED BODY MATERIAL TO GSF SKETCH NO F 2344 FOR 125 MM HEAT AMMUNITION
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FORGING AND FINISHED COMPONENTS (1 KGS TO 500 KGS)()
AS PER DRG. & SPECIFICATION
1
Estab.
Category : DDP
Grade : II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) TOOTHED RIM TO 3901011026[39]()
Specification : 188.11.002/F
R
Nonestab
2) MOVABLE RACE RING FORGING TO 3901011048[39]()
Specification : 447A.11.016/F
C
Nonestab
3) DRUM RH FORGING TO 3901040036[39]()
Specification : 172.40.302/F
R
Nonestab
4) BOOSTER FORGING TO 3901040054[39]()
Specification : 172.40.321/F
R
Nonestab
5) INNER BOOSTER FORGING TO 3901040055[39]()
Specification : 172.40.322/F
R
Nonestab
6) RH EXTREME ENGAGING RING FORGING TO 3901040061[39]()
Specification : 172.40.328/F
R
Nonestab
7) RH MIDDLE ENGAGING RING FORGING TO 3901040062[39]()
Specification : 3901040062
R
Nonestab
8) R H FRONT FLANGE TO 3901040104[39]()
Specification : 172.40.364/F
C
Nonestab
9) L H FRONT FLANGE TO 3901040106[39]()
Specification : 172.40.365/F
R
Nonestab
10) RING RACE LOWER TO 3901212010[39]()
Specification : 172.12.015/F
R
Nonestab
11) RING RACE UPPER TO 3901212011[39]()
Specification : 188.12.002/F
R
Nonestab
12) MOVABLE RACE RING TO 3906109014[39]()
Specification : 172.11.067/F
R
Nonestab
13) GEAR RIM TO 3906109067[39]()
Specification : 172.11.129/F
R
Nonestab
14) BLANK SIZE FOR RING RACE LOWER TO 3906111026[39]()
Specification : 434.12.007/F
R
Nonestab
15) BLANK SIZE FOR RING RACE UPPER TO 3906111455[39]()
Specification : 172.12.031/F
R
Nonestab
16) FLANGE FRONT L H TO 3906401045[39]()
Specification : 172.40.201-1A/F
C
Nonestab
17) FLANGE FRONT R H TO 3906401101[39]()
Specification : 175.40.001-A/F
C
Nonestab
18) FLANGE REAR RH TO 3906401115[39]()
Specification : 175.40.019-1A/F
C
Nonestab
19) DRUM RH AND LH TO 3906401123[39]()
Specification : 175.40.017-A&018-A/F
C
Nonestab
20) DISC TO 3906401132[39]()
Specification : 175.40.031/F
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) INTERMEDIATE GEAR(FORGING DRG) ()
DRG.NO.175-45-005/F.
R
Not Estab
Category : P
Grade : II
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) TRACK LINK DRG NO 172 55 012 TRACK T 90 ITEM CODE 6120100128[61]()
Specification : TRACK LINK TO DRAWING NO. 172.55.012.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRAWING NO 172.55.012/F(HVF)AND TECHNICAL REQUIREMENTS GOST 4543-71, GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S
C
Nonestab
2) CLAMP TO DRG NO 172 55 025 TRACK T 90 ITEM CODE NO 6120100130[61]()
Specification : CLAMP TO DRG.NO. 172.55.025{CQA(HV)}. COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.025/F (HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS
C
Nonestab
3) SHOE TO DRG NO 219 35 126 TRACK T 90 ITEM CODE 6120100196[61]()
Specification : "SHOE" TO DRAWING NO. 219.35.126.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRA.NO.219.35.12 6/F(HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S
C
Nonestab
4) GUIDE TO DRG NO 172 55 013 TRACK T 90 ITEM CODE 6120100197[61]()
Specification : ["TRACK GUIDE" TO DRG. NO.172.55.013.{CQA{HV)}COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.01 3/F(HVF)AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70.GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS
C
Nonestab
5) T A BOLT M27 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100256[61]()
Specification : ["T.A.BOLT (M27 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.219.35.158 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING". BOLTS SHOULD BE FREE FROM ANY FORGING SCALES
C
Nonestab
6) T A BOLT M20 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100257[61]()
Specification : ["TA BOLT (M20 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.172.55.026 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING".BOLTS SHOULD BE FREE FROM ANY FORGING SCALES.
C
Nonestab
7) INTERNAL DISC TO DRG NO 765 16 4 AS PER ANNEXURE A ITEM CODE 4215990724[42]()
Specification : INTERNAL DISC TO DRG.NO.765-16-4 AS PER ANNEXURE -"A"
C
Nonestab
8) EXTERNAL DISC TO DRG NO 765 16 8 AS PER ANNEXURE A ITEM CODE 4215990725[42]()
Specification : EXTERNAL DISC TO DRG.NO.765.16.8 AS PER ANNEXURE "A"
C
Nonestab
Category : ddp
Grade : 3
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG FOR LUG HOUSING 250 KG L F NO 6241101114[62]()
Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED]
C
Nonestab
2) FIL PLUG MCD W O SUR 250 KG L F NO 6240000504[62]()
Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
3) FILLING PLUG MCD 450 KG L F NO 6230400504[62]()
Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
4) NOSE PLUG ARM 1049B 1000 LBS L F NO 6220901044[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED].
C
Nonestab
5) NOSE PLUG W O PHOSPHATED 250 KG L F NO 6240900504[62]()
Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED]
C
Nonestab
6) NOSE PLUG MCD ARDE 2122 450 K L F NO 6230900504[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7.[DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
7) FILLING PLUG FORGING 1000 LBS L F NO 2015995448[20]()
Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. [DRG.ENCLOSED].
C
Nonestab
8) THRUSTER PLATE FOR 1000 LBS L F NO 6220200120[62]()
Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. (DRG. ENCLOSED).
C
Nonestab
9) FORGING FOR LUG 318 FOR 1000 LBS L F NO 6220601406[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738B TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A".(DRGS.
C
Nonestab
10) FORGING FOR LUG 243 AS PER DRG FOR 1000 LBS L F NO 6220700172[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
11) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED].
C
Nonestab
12) R NUT MCD W O SUR 250 KG BOMB L F NO 6240900904[62]()
Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
13) RING NUT MCD 450 KG L F NO 6230900904[62]()
Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
14) BASE TRANSIT MCD 1000 LBS L F NO 6220901004[62]()
Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 [W/O SURFACE TREATMENT]. [DRG. ENCLOSED].
C
Nonestab
15) BASE TRANSIT MCD W O SUR 250 KG L F NO 6240900104[62]()
Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB
C
Nonestab
16) BASE TRANSIT MCD 450 KG L F NO 6230901004[62]()
Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED]
C
Nonestab
17) BOLT M20 X 1 POINT 5 6G TRACK T 90 L F NO 6120100107[61]()
Specification : BOLT TO DRAWING NUMBER 172.55.026 (M20 x 1.5-6G){CQA(HV)}TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87 PROCESS SHEETS- HOT SETTING, HIGH TEMPERING, ISOTHERMAL HARDENING, CADMIUM COATING.
C
Nonestab
18) BOLT M27 X 1 PINT 5 6G TRACK T 90 L F NO 6120100108[61]()
Specification : BOLT TO DRAWING NUMBER 219-35-158 (M27 X 1.5-6G) {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 7505-89
C
Nonestab
19) TRACK SHOE FOR T 72 MANUFACTURING OF HIGH MANGANESE L F NO 6120100213[61]()
Specification : MANUFACTURING OF HIGH MANGANESE STEEL CASTING OF TRACK SHOE TO DRAWING NO. 613-44-030-4A DULY HEAT TREATED,DRIFTED/MACHINED. CASTINGS ARE TO BE SUPPLIED IN FINISHED DRIFTED/MACHINED. CASTINGS ARE TO BE SUPPLIED IN FINISHED CONDITION AS PE
C
Nonestab
Category : ddp
Grade : 3
Size :
M
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOOSTER CUP and PIN FOR 84MM HEAT 551 LF 9911358084[99]()
Specification : SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).
C
Nonestab
2) SHELL BODY BLANK TO OFK DRG 839L LF 6170444600[61]()
Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).
C
Nonestab
3) BOMB BODY E SET ASSY 100 120KG PRE FRAG LF 9911358086[99]()
Specification : SET OF BOMB BODY EMPTY ASSEMBALY TO DRG NO.0303 00 01 01 02 000 00PC & CONSISTING OF 29 COMPONENTS AND TO ARDESPECIFICATION NO.ARDE/SPECN/668 DATE DEC'2007 REV.3 DATE NOV.2015 FOR PRE-FRAG 100-120KG
C
Nonestab
4) SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN FOR FUZE FB 40 FOR 40 MM PFFC LF 9911358194[99]()
Specification : SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0
C
Nonestab
5) BOWL FOR 76 62 MM SHELL LF 9911357252[99]()
Specification : BOWL FOR SHELL 76/62 SRGM AMMN. TO TO DRG. NO.TRD-1-2-1984. OR NASK 1108/.4/2/(P)
C
Nonestab
6) Bomb Assy Empty for 500Kg GP Bomb LF 9911358587[99]()
Specification : Bomb Assembly (Empty) for 500Kg GP Bomb
C
Nonestab
7) WASHER AS PER DRG NO MKTA 754152 001 LF 9911358668[99]()
Specification : WASHER AS PER DRG NO MKTA 754152.001/TRD 1.1.3221
C
Nonestab
8) SHELL HEI EMPTY 30MM BMP II LF 9911358129[99]()
Specification : BODY EMPTY WITH BAND ASSY TO DRG NO.bw5.500.009Cb/c 2 SHEETSSHEET-1 DC-37321-A DT 18-10-12 SHEET-2 DC- 34241-ADT.24/09/87 SPECN.PROGRAMME AND METHOD OF TESTING AS PERSHEET NO.5w5.500.112 M/C (5 SHEET) DC-34241-A DT.24-9-87.
C
Nonestab
9) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528[99]()
Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) RIM OF CASTING TO 3801054008[38]()
Specification : 172.54.015-1B/C
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) INNER DISC TO 3806416090[38]()
Specification : 3806416090
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) INNER DISK TO 6206416090[62]()
Specification : 172.56.009-B
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) IDLER WHEEL BRACKET RH TO 3806801186[38]()
Specification : 172.01.568/C
C
Nonestab
2) LH BRACKET OF IDLER WHEEL TO 3806801187[38]()
Specification : 172.01.569/C
C
Nonestab
3) BRACKET CASTING TO 3801201151[38]()
Specification : 172.01.735/C
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ADOPTER SCREW TO LF 9911358097[99]()
Specification : ADOPTER SCREW TO DRG.NO.MMG-H/MK-1/051/RO.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) LUG 500 FOR 250KG PRE FRAG BOMB[99]()
Specification : LUG 500 TO ARDE DRAWING NO. ARDE 2143 & SPECIFICATION TO ARDE/SPEC/438 FOR 250 KG PRE-FRAG BOMB.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PLUNGER BLANK FOR 84 HEAT-551[99]()
Specification : PLUNGER BLANK TO DRG NO.6417 888/DRG.NO.TRD-1-2-2293.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) RH DRUM TO 3901040034[39]()
Specification : GOST 4543-71
C
Nonestab
2) DRUM OPN 10 20SMF TO LF3956401128[39]()
Specification : GOST 4543-71
C
Nonestab
3) WHEEL GEAR RH TO LF3906401104[39]()
Specification : GOST 4543-71
C
Nonestab
4) DRUM RH LH TO LF3906401123[39]()
Specification : GOST 4543-71
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) SHELL 105MM IFG HE A/L FORGED STEEL[62]()
Specification : SHELL 105MM IFG HE A/L FORGED STEEL TO DRG.PART NO.ISX-46GE SHEET-1 DC NO. 37366-A, DT.26.07.14 & SHEET-2 DC NO.37366-A,DT.26.07.14.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) 51MM MORTAR BOMB BODY(EMPTY) TO PT. NO.ITV 17 SA[65]()
Specification : 51MM MORTAR BOMB BODY(EMPTY) TO PT. NO.ITV 17 SA (02 SHEETS),SHEET NO.01 DC 37111-A DT.21.05.07 & SHEET-2, DC 37193-A DT.13.11.08.
C
Nonestab
2) BODY TO DRG.NO.9-04367/9- -104/ 38.300.150[63]()
Specification : BODY TO DRG.NO.9-04367/9- -104/ 38.300.150, DC NO.36396-A DT-21.03.98.
C
Nonestab
3) BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12[62]()
Specification : BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12 [USING WITH BODY (ALTERNATIVE) TO DRG.NO.bW 8.035.085/C SHEET 3 & 4 DC NO.34640-A,DT-9.6.89]. REF:(1) BODY WITH ASSY. DRAWING bW 5.500.113 Cb/c DC(1)-
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SHAFT IFL 7962 TO DRG NO IFL 7962[90]()
Specification : SHAFT IFL 7962 TO DRG NO IFL 7962
C
Nonestab
2) DISC WHEEL TO DRG NO 1015 000810[90]()
Specification : DISC WHEEL TO DRG NO 1015 000810
C
Nonestab
3) 9081005701 SHAFT TO DRAWING NO 3054134[90]()
Specification : SHAFT TO DRAWING NO.3054134
C
Nonestab
4) 9069111896 FORGING DRAWING FOR PIVOT TO DRG NO REF DRG NO 3015305 GCF LM 1076 B[90]()
Specification : (FORGING DRAWING) FOR PIVOT TO DRG. NO.(REF DRG NO 3015305) GCF LM-1076(B).
C
Nonestab
5) 9069111916 FORGING DRAWING FOR LEG TO DRG NO GCF LM 1065B REF DRG NO 3015284[90]()
Specification : (FORGING DRAWING) FOR LEG TO DRG. NO.GCF LM-1065(B) REF.DRG. NO. 3015284.
C
Nonestab
6) 9073100008 STEEL CASTING OF PIECE WEDGE TO DRG NO GCF MN 5412 A[90]()
Specification : 9073100008 STEEL CASTING OF PIECE WEDGE TO DRG NO GCF MN 5412 A
C
Nonestab
7) 9073100009 STEEL CASTING OF GUIDE BRACKET TO DRG NO GCF MN 5413 A[90]()
Specification : 9073100009 STEEL CASTING OF GUIDE BRACKET TO DRG NO GCF MN 5413 A
C
Nonestab
8) SHACKLE D 1A D6P TA 7208SA TO DRG NO 4030 000371 ICM 242A[90]()
Specification : SHACKLE "D"1A(D6P-TA-7208SA) TO DRG.NO.4030-000371/ICM-242A
C
Nonestab
9) 9070100092 FRONT AXLE ASSY IAN 39A[90]()
Specification : 9070100092 FRONT AXLE ASSY. IAN 39A
C
Nonestab
10) COMPLETE MACHINING OF TRUNION BLOCK TO DRG NO V548 0136 1000 FORGING WILL BE SUPPLIED BY GCF TO DRG NO GCF MN 5402 D[90]()
Specification : COMPLETE MACHINING OF TRUNION BLOCK TO DRG NO. V548 0136 1000 (FORGING WILL BE SUPPLIED BY GCF TO DRG NO GCF MN-5402 (D)
C
Nonestab
11) FORGINGS FOR TORSION SHAFT RH LH M4618 180 and M46 18 181 FOR 130MM FIELD GUN[90]()
Specification : FORGINGS FOR TORSION SHAFT RH/LH,M46-18-180 & M46-18-181 FOR 130MM FIELD GUN
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY ITEM CODE 6241101139[62]()
Specification : LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY AS PER ANNEXURE-A (ATTACHED
C
Nonestab
2) FILLING PLUG MACHINED LF NO 6250700174[62]()
Specification : FILLING PLUG (MACHINED). AS PER DRAWING ARM 1172B5 (R.NO. 4, DATED 25/04/89)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) CONT EXP W O SUR 250 KG HSLD L F NO 6244121304[62]()
Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO.ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB
C
Nonestab
2) DETONATOR HOLDER 1000 LBS MCD L F NO 6220900700[62]()
Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED
C
Nonestab
3) DET HOLDER MCD 450 KG 250 KG L F NO 6230901204[62]()
Specification : DETONETOR HOLDER [MCD] [WITHOUT SURFACE TREATED TO DRG. NO.ARDE 9501-01 DET - 9. [DRG. ENCLOSED
C
Nonestab
4) DETONETOR HOLDER MCD FOR 450 KG HSLD BOMB BODY L F NO 6230901206[62]()
Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY.
C
Nonestab
5) LUG HOUSING W O PHOS 250 KG L F NO 6240100114[62]()
Specification : LUG HOUSING TO DRG. No. ARDE 9501 - 01 DET 4 SHT. No. 1 (W/O PHOSPHATED) [DRG. ENCLOSED]
C
Nonestab
6) LUG HOUSING HOLDER 250 KG L F NO 6240100124[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Nonestab
7) LUG HOUSING ASSEMBLY MACHINED 450 KG L F NO 6230100104[62]()
8) PLUG A C34 DRG ARM 1172 A 16 FOR 1000 LBS L F NO 6220501010[62]()
Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED)
C
Nonestab
9) PLUG FASTENING FOR 250 KG L F NO 6241101124[62]()
Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED]
C
Nonestab
10) PLUG SURFACE TREATED FOR 250 KG L F NO 6240901205[62]()
Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED][DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
11) PLUG MCD SURFACE TREATED 450 KG L F NO 6231101105[62]()
Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED].
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SHAFT TO DRG. NO. 5047139[90]()
Specification : SHAFT TO DRG. NO. 5047139
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOMB 450 KG HSLD EMPTY ASSY ARDE-2122 (9911354403)[99]()
Specification : HIGH SPEED LOW DRAG , 450 KG MC/HE, A/C BOMB EMPTY ASSEMBLY TO DRG NO ARDE-2122 DETAIL-1, 2SHEET- SHEET NO.1 R.NO.1DT.7-3-91 & 2 DT.11-04-07. SHEET NO 2 R.1 DT.7-3-91 & 2 DT13-4-07.
C
Nonestab
2) BOMB 1000 LBS MK-II(N) HE (N&T) EMP (9911357491)[99]()
Specification : EMPTY ASSY.BOMB HE A/C M.C. 1000 LBS ( 450 KG ) MK-II (N) NOSE & TAIL EXPLODERED TO DRG. NO. ARM-1482 D2. R NO -2.DT. 30-06-05.
C
Nonestab
3) BODY ASSY-4-26941-060 FOR(81MM SMK) (9911355970)[99]()
Specification : BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.
C
Nonestab
Category : dp
Grade : 3
Size :
M
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) SHELL BODY WITH DRIVING BAND 107 TO DRG NO 3060202 DC 36490 A DTD19 11 1998[62]()
Specification : SHELL BODY WITH DRIVING BAND 107 TO DRG.NO. 3060202, DC:36490-A DTD.19.11.1998 AND SURFACE TREATED AS PER DRG.NO.3060203 DC-36490-A DTD.19.11.1998,EXTERNALLY PAINTED AS PER DRG NO. 6374 058 DC NO. 37586-A DT. 22.07.21 WITH PAINT RFU FINIS
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOMB 250 KG HSLD, ARDE-9501-01/1 EMPTY[99]()
Specification : BOMB 250 KG HSLD EMPTY ASSEMBLY TO DRG NO. ARDE-9501-01 (DET.NO-1) ASSEMBLED WITH ROLLING RING ASSY TO DRG. NO. ARDE-9501-01 (DET NO.18) ON THE BOMB.
E
Nonestab
Category : ddp
Grade : Grade II
Size :
M
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) FUZE PERCN DA 117 MK20 EMPTY COMPLETE[63]()
Specification : I.A. 1204
C
Nonestab
2) BOMB 120MM HE 1A EMPTY BODY[60]()
Specification : SPECN NO. CQA(A) 2341(A) DC 37482-A
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) FUZE PERCN DA 117 MK20 EMPTY COMPLETE[63]()
Specification : I.A. 1204
C
Nonestab
2) BOMB 120MM HE 1A EMPTY BODY[60]()
Specification : SPECN NO. CQA(A) 2341(A) DC 37482-A
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) MACHINING OF 250 KG STEEL SHELL L F NO 6241101206[62]()
Specification : MACHINING OF 250KG STEEL BOTTLE CASTING (DRG.NO.OFM-10057 AS PER DRG.NO.-OFM-33042 & ANNEXURE-A.
5) LUG SUSPENSION NO 318 Item code 6250700175[62]()
Specification : LUG SUSPENSION NO. 318 (MACHINED) AS PER DRAWING NUMBER ARM 1302C5 (R.NO.4, DATED 09/02/2023)
C
Nonestab
6) LUG SUSPENSION NO 243 AND THRUSTER PLATE MACHINED L F NO 6250700173[62]()
Specification : LUG SUSPENSION NO. 243 AND THRUSTER PLATE (MACHINED). AS PER DRAWING NUMBER ARM 1461D. (R. NO. 2, DATED 05/10/01)
C
Nonestab
7) MACHINING JOB WORK OF LUG 243 ITEM CODE 9449580030[94]()
Specification : AS PER ANNEXURE -A
C
Nonestab
8) MACHINING JOB WORK OF LUG 318 ITEM CODE 9449580029[94]()
Specification : AS PER ANNEXURE-A
C
Nonestab
9) MACHINING JOB WORK OF FILLING PLUG ITEM CODE 9449580031[94]()
Specification : AS PER ANNEXURE A
C
Nonestab
10) CAST STEEL EMPTY BODY MACHINED AS PER ANNEXURE A ITEM CODE 4215990739[42]()
Specification : CAST STEEL EMPTY BODY (MACHINED) AS PER ANNEXURE-A AND AS PER DRG. NO.OFM 33056
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) 3RD LH AND RH SUPPORT OF ROAD WHEEL ARM TO LF 6206831637[62]()
Specification : GOST 26645-85
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) LEVER[04]()
Specification : 20X2H44 GOST 4543-71
C
Nonestab
Category : p
Grade : Grade I
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) SPIDER UNIVERSAL[04]()
Specification : SPIDER UNIVERSAL
C
Nonestab
Category : p
Grade : Grade I
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Forging Cylinder Gas[01]()
Specification : Steel Forging Cylinder Gas SKM 306*5 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) GEAR DELIVERY PUMP TO 3906401049[39]()
Specification : GOST 4543-71
C
Nonestab
2) COUPLING TOOTHED to 3906406229[39]()
Specification : GOST 4543-71
C
Nonestab
3) CARRIER PLANET TO DRG NO 172 40 238 F TO LF 3906401072[39]()
Specification : GOST 4543 71
C
Nonestab
Category :
Grade : Grade III
Size :
M
1025
ENGINEERING AIDS
S.No.199/5b, No.14, Vayalanallur Village, Balaji Chamber Street Chennai Tamil Nadu
PIN1 : 600072
Phone No. : 26381945 GSTIN : 33AAAFE0237F1Z6
Specification : ERA MOUNTING PLATE ASSEMBLY (STD) AS PER DRG NO. CVRDE/DV/ERA STAND/01-S & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFERNER PLATES
C
Nonestab
2) 0133030122 ERA MOUNTING PLATE ASSEMBLY TOP[01]()
Specification : ERA MOUNTING PLATE SEEMBLY ( TOP) AS PER DRG NO. CVRDE/DV/ERA STAND/01-T & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFENER PLATES
1) Breather system Mounting without scavenge pump()
SB 3342-00-21A
E
Not Estab
2) Steel Packing Case()
SK/0706-0709
E
Established
3) Ventilation System of Crankcase()
SB 3342-00-8A
E
Established
4) Air Starting system Pipeline()
SB 20-22-00-7A
E
Established
5) Air heating unit assy()
SB 345-00-1
E
Established
6) Assy Manifold Intake()
SB 419-00-4
E
Established
7) Exhaust Manifold()
SB 418-50-45
E
Established
8) Inst. of device of press & Air dist()
SB 310-00-7
C
Established
9) Air heating unit assy()
SB 345-00-1
E
Established
10) Assy Manifold Intake()
SB 419-00-4
E
Established
11) Exhaust Manifold()
SB 418-50-45
E
Established
12) Inst. of device of press & Air dist()
SB 310-00-7
C
Established
Category : P
Grade : III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) CHAIN()
DRG.NO.GOST:13568(PR.12.7)
C
Not Estab.
Category : P
Grade : III
Size :
S
1032
Himatsingka Exports Private Ltd
9th, I Floor, Local Shopping Centre, Udai Park, New Delhi New Delhi
PIN1 : 110049
Phone No. : 011-26961954/41640712/09810129152 GSTIN : 09AABCH1307B2Z9
9) Fabrication of Trouser Serge Polywool 1973 Pattern (modified)()
As per Specification
E
Not Estab.
10) Fabrication of Shorts Cotton Light OG()
As per Specification
E
Not Estab.
11) Fabrication of Shirt Plain Weave PV light Blue F/S()
As per Specification
E
Not Estab.
12) Fabrication of Shorts PV DD Khaki()
As per Specification
E
Not Estab.
13) Fabrication of Trousers PW PV DD OG()
As per Specification
E
Not Estab.
14) Fabrication of Trousers PW PC Khaki()
As per Specification
E
Not Estab.
15) Fabrication of Shirt PV Light Grey H/S()
As per Specification
E
Not Estab.
16) Fabrication of Cap DB White()
As per Specification
E
Not Estab.
17) Fabrication of Coat DB White()
As per Specification
E
Not Estab.
18) Fabrication of Trousers DB White()
As per Specification
E
Not Estab.
19) Fabrication of Trouser PV Blue Grey()
As per Specification
E
Not Estab.
20) Fabrication of Coat Combat Disruptive Detachable Lining()
As per Specification
E
Not Estab.
21) Fabrication of Overall Combination Black()
As per Specification
E
Not Estab.
22) Fabrication of Coat ECC()
As per Specification
E
Not Estab.
23) Fabrication of Overall Comb. Disruptive ()
As per Specification
E
Not Estab.
24) Fabrication of Shirt PV Light blue H/S()
As per Specification
E
Not Estab.
25) Fabrication of Jacket Combat PC Disruptive Pattern with Indian Army Logo()
As per Specification
E
Not Estab.
26) Fabrication of Trouser Combat PC Disruptive Pattern with Indian Army Logo()
As per Specification
E
Not Estab.
27) Fabrication of Jacket Combat PC Disruptive Pattern with Indian Army Logo (modified)()
As per Specification
E
Not Estab.
28) Fabrication of Trousers Combat PC Disruptive Pattern with Indian Army Logo (modified)()
As per Specification
E
Not Estab.
29) Fabrication of Shirt Mans Angola Drab Poly Wool Modified Pattern 2012()
As per Specification & Requirement
E
Non Established
30) Fabrication of Shorts PW PC White (modified)()
As per Specification & Requirement
E
Non Established
31) Fabrication of Overall Drill MP()
As per Specification & Requirement
E
Non Established
32) Fabrication of Overall Combination Greenish Khaki()
As per Specification & Requirement
E
Non Established
33) Fabrication of Shorts Gymnastic Blue()
As per Specification & Requirement
E
Non Established
Category : P
Grade : II
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Trouser ECC()
FABRICATION OF COMPLETE TROUSERS ECC CONFIRMING TO PROV.SPECIFICATION NO.S/3558/A/TC-15/TROUSERS ECC(TWC & TSP) (a)AND APPROVED SAMPLE.AS PER RELEVANT CLAUSE OF SPECIFICATION
FABRICATION OF COAT ECC(IMP.VER.)AS PER SPECIFICATION NO.IND/TC/4587(C) AND APPROVED SAMPLE.As per relevant clause of specification
E
Not Estab.
Category : DDP
Grade : II
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Trouser ECC()
FABRICATION OF COMPLETE TROUSERS ECC CONFIRMING TO PROV.SPECIFICATION NO.S/3558/A/TC-15/TROUSERS ECC(TWC & TSP) (a)AND APPROVED SAMPLE.AS PER RELEVANT CLAUSE OF SPECIFICATION
Specification :As per Requirements & Specifications
R
Estab
Category : DP
Grade : II
Size :
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabric twill weave Poly & Cotton (67:33) Dis. WR 290 GSM 150cm (Min) Width with Indian Army Logo[21]()
Specification : No. PROV/S/2599/TC-11/2009/01, Except That Clause No. 6.1 & 6.2 Which shall be suitable yarn count may be used in warp & weft in 3/1 twill weave to meet the functional & other constructional parameter along with feel & Finish & Clause no.
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]()
1) EMPTY COMPONENTS LOWER SET FOR BOMB 51MM ILLG. 1A[62]()
Specification : CQA(A) 2328
C
Nonestab
2) RUBBER WASHER FOR 51MM ILLG.[62]()
Specification : DRG. NO.ARDE 2064 DET NO 17 PT NO ITV 234 SPECN. CQA(A) 2328 (d)
C
Nonestab
3) CUP FOR BOMB 51MM ILLG.[62]()
Specification : DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH GREEN[60]()
Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER
C
Nonestab
2) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH ILLUMINATING[60]()
Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1035
B G ENTERPRISES
SR. NO 139, ASHOK NAGAR NEAR TOYOTA SHOWROOM, TATHAWADE PUNE Maharashtra
PIN1 : 411033
Phone No. : 9075095039 GSTIN : 27AFGPN8763G1Z0
1) HANDLE COCKING COMPONENT DRG NO 6P11 9 1 DRG NO 62 C 3901 200 C3[70]()
Specification : AS PER DRAWING OF HANDLE COCKING COMPONENT DRG NO 6P11 9 1 DRG NO 62 C 3901 200 C3
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Blank of Body Cover Drg No 23055A SKM 902 1[01]()
Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902 1,
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA
Description : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA()
Specification : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA
C
Estab
2) Lower Body For CQB 5 56 x 45 MM for CQB DRG No 1901 01 01 11 16 001 00DA
Description : Lower Body For CQB 5 56 x 45 MM for CQB DRG No 1901 01 01 11 16 001 00DA()
Specification : Lower Body For CQB 5.56x45 MM for CQB DRG. No. 1901 01 01 11 16 001 00DA.
C
Estab
Category : ddp
Grade : 3
Size :
S
1037
Phoenix Machining works
PLOT NO-6, SURVEY NO-26, SHAPAR MAIN ROAD B/H. RAVI TILES shapar Gujarat
PIN1 : 360024
Phone No. : 9427237719 GSTIN : 24AAIFP4356L1ZX
1) PRE MACHINED BLANK FOR RECEIVER BUSHING AS PER DRG NO TEND 2682 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04010[70]()
Specification : AS PER OFT REQUIREMENT
R
Nonestab
2) 20MM BOLT LEVER 44P 03002[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
3) 14 5MM BOLT LEVER 44P 14014[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
4) BUFFER FORK 44P 04103[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
5) CLAMP NUT 44P 04007[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
6) 44P03010 20MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT SPECIFICATIONS
R
Nonestab
7) 44P14006 14 5MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
8) SEAR 14 5MM AND 20MM DRG NO 44P06009[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
9) HAMMER TO DRG NO 44P06013[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
10) RETAINING BLOCK TO DRG NO 44P 06104[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
11) 20MM CAST CARTRIDGE ASSEMBLY TO DRG NO 44P03021[70]()
Specification : AS PER OFT SPECIFICATIONS
R
Nonestab
12) 14 5MM CAST CARTRIDGE EXTRACTOR TO DRG NO 44P14033[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
13) 20MM FIRING PIN TO DRG NO 44P03013[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
14) 14 5MM FIRING PIN TO DRG NO 44P14009[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MSL HOUSING LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
