1) 9069112584 BEARING TO DRG NO BOF 6112469 OR IMB 429CN[90]()
Specification : BEARING TO DRG NO BOF 6112469 OR IMB 429CN
C
Nonestab
2) 9080081467 PIN SHOULDER HEADED TO DRG NO 5315 001003[90]()
Specification : PIN SHOULDER HEADED TO DRG NO 5315 001003
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) MACHING OF TRAVERSING NUT()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
2) MACHINING OF HALF UPPER COLLER()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
Category : DDP,DP
Grade : I,II
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) ARM LEFT[AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS]()
AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
C
Not Established
2) MACHING OF TRAVERSING NUT[As per GCF Spcn./Drg./Size & requirements]()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
3) MACHINING OF HALF UPPER COLLER[As per GCF Spcn./Drg./Size & requirements]()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
Category : DDP,DP
Grade : I,II
Size :
1Gun Carriage Factory
Name
Specification
Use
Status
1) PLUG GLAND EXTENSION (EQUILIBRATOR) TO DRG. NO. 1015-000435[90]()
Specification : PLUG GLAND EXTENSION (EQUILIBRATOR) TO DRG. NO. 1015-000435
C
Nonestab
2) PLUG TO DRG. NO. 1015-000547[90]()
Specification : PLUG TO DRG. NO. 1015-000547
C
Nonestab
3) PLATE MOUNTING RESISTOR ASSY. TO DRG. NO. 5905-024842[90]()
Specification : PLATE MOUNTING RESISTOR ASSY. TO DRG. NO. 5905-024842
C
Nonestab
4) PIN SHOULDER TO DRG. NO. 5315-001003[90]()
Specification : PIN SHOULDER TO DRG. NO. 5315-001003
C
Nonestab
5) NUT, CLAMP (MACHINING) TO DRG. NO. 5310-006006[90]()
Specification : NUT, CLAMP (MACHINING) TO DRG. NO. 5310-006006
C
Nonestab
6) LEVER TO DRG. NO. DS CAT - 1015-000771[90]()
Specification : LEVER TO DRG. NO. DS CAT - 1015-000771
C
Nonestab
7) SPINDLE TO DRG. NO. CM-3342[90]()
Specification : SPINDLE TO DRG. NO. CM-3342
C
Nonestab
Category : DDP,DP
Grade : I,II
Size :
1Gun Carriage Factory
Name
Specification
Use
Status
1) SPACER TO PART NO 5050983[90]()
Specification : SPACER TO PART NO 5050983
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) BLOCK AS PER DRG.NO.MCT-3283 FOR COLLIMETER INFINITY 102 A.()
As per required Specification
C
Not Estab.
2) RING RETAINING DRG.NO. MCT-2959/1.()
As per required Specification
C
Not Estab.
3) CELL EP DRG.NO.CWC/229/35/1.()
As per required Specification
C
Not Estab.
4) SECURING RING DRG.NO.CWC/229/56/1 FOR II TUBE.()
As per required Specification
C
Not Estab.
5) GRATICULE RING DRG. NO.CWC/229/67/2.()
As per required Specification
C
Not Estab.
6) STUD LOCK PIN FASTNERS ECCENTRIC TO DRG. MCT-3092.FOR MT.TELE.102A.()
As per required Specification
C
Not Estab.
Category : DDP,DP
Grade : I,II
Size :
S
1Grey Iron Foundry
Name
Specification
Use
Status
1) Adapter Bush()
As per Drg. & Specification
C
Not Established
2) Machining of Lifting Plug()
As per Drg. & Specification
C
Not Established
3) Machining of 25LBS Bomb Body()
As per Drg. & Specification
C
Not Established
Category : DP
Grade : I,II
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) SHOOTING REST FOR JVPC TO DRG. NO. 0204-03-02-00-00-000-00AA()
AS PER DRG.
C
Not Estab.
Category : DDP,DP
Grade : II
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Primer Magazine ()
Part No. 1165150
C
Not Estab.
Category : DDP,DP
Grade : II
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) HOLDING ARRANGEMENT TO DRG NO COT SK 2867[63]()
Specification : Kindly visit www.ofbeproc.gov.in
E
Nonestab
Category : DDP,DP
Grade : II
Size :
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) HOLDING ARRANGEMENT TO DRG NO COT SK 2867[63]()
Specification : Kindly visit www.ofbeproc.gov.in
C
Nonestab
2) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
3) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
4) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
5) ARM AS PER DRG NO D 4083347[63]()
Specification : ARM AS PER DRG NO D 4083347 REV A FOR DHANUSH ORDNANCE
C
Nonestab
6) ARM TO DRG NO D 4081495[63]()
Specification : ARM TO DRG NO D 4081495 REVISION A FOR DHANUSH
C
Nonestab
7) RACK HOUSING TO DRG NO 176 8141[63]()
Specification : As per Drg No 176 8141
C
Nonestab
8) HOLDER AS PER DRG NO D 4078830[63]()
Specification : HOLDER AS PER DRG NO D-4078830 REV B FOR DHANUSH ORDNANCE
C
Nonestab
9) Lanyard Short to Drg No 161 1292[63]()
Specification : As per Drg. No. 161-1292
C
Nonestab
10) LUBRICATING HEAD TO PART NO 161 1387 AND PULLING BACK DEVICE TO DRG NO 176 1475[63]()
Specification : FOR MORE TENDER RELATED DETAIL VIST WWW.OFBEPROC.GOV.IN
C
Nonestab
11) Hand Rammer to part no 166 282[63]()
Specification : As per Part No. 166-282
C
Nonestab
12) Brush primer as per drg no 161 1390[63]()
Specification : as per drg no 161 1390
C
Nonestab
13) Pressure Plate Fasten Fixture to Part No 166 617[63]()
Specification : As per Part No 166-617
C
Nonestab
Category : DDP,DP
Grade : II
Size :
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) HOLDING ARRANGEMENT TO DRG NO COT SK 2867[63]()
Specification : Kindly visit www.ofbeproc.gov.in
C
Nonestab
2) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
3) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
4) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
5) ARM AS PER DRG NO D 4083347[63]()
Specification : ARM AS PER DRG NO D 4083347 REV A FOR DHANUSH ORDNANCE
C
Nonestab
6) ARM TO DRG NO D 4081495[63]()
Specification : ARM TO DRG NO D 4081495 REVISION A FOR DHANUSH
C
Nonestab
7) RACK HOUSING TO DRG NO 176 8141[63]()
Specification : As per Drg No 176 8141
C
Nonestab
8) HOLDER AS PER DRG NO D 4078830[63]()
Specification : HOLDER AS PER DRG NO D-4078830 REV B FOR DHANUSH ORDNANCE
C
Nonestab
9) Lanyard Short to Drg No 161 1292[63]()
Specification : As per Drg. No. 161-1292
C
Nonestab
10) LUBRICATING HEAD TO PART NO 161 1387 AND PULLING BACK DEVICE TO DRG NO 176 1475[63]()
Specification : FOR MORE TENDER RELATED DETAIL VIST WWW.OFBEPROC.GOV.IN
C
Nonestab
11) Hand Rammer to part no 166 282[63]()
Specification : As per Part No. 166-282
C
Nonestab
12) Brush primer as per drg no 161 1390[63]()
Specification : as per drg no 161 1390
C
Nonestab
13) Pressure Plate Fasten Fixture to Part No 166 617[63]()
Specification : As per Part No 166-617
C
Nonestab
14) Housing as per drg no D 4077841 Rev A for Dhanush Ordnance[63]()
Specification : as per drawing
C
Nonestab
Category : DDP,DP
Grade : II
Size :
1Gun Carriage Factory
Name
Specification
Use
Status
1) LEVER TO PART NO 6121855[90]()
Specification : LEVER TO PART NO 6121855
C
Nonestab
2) LEVER VSG TILTING BOX TO PART NO BOF 5050320[90]()
Specification : LEVER VSG TILTING BOX TO PART NO BOF 5050320
C
Nonestab
3) LEVER TO PART NO BOF 5050320 2[90]()
Specification : LEVER TO PART NO BOF 5050320 2
C
Nonestab
4) 9069112695 LEVER RIGHT TO PART NO BOF 5047788[90]()
Specification : 9069112695 LEVER RIGHT TO PART NO BOF 5047788
C
Nonestab
5) 9069112518 LEVER TO DRG NO BOF 6112228[90]()
Specification : 9069112695 LEVER RIGHT TO PART NO BOF 5047788
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) CASE OF FIRING UNIT ()
AS PER DRG. NO. 3053014
E
Estab.
2) FINISH MACHINE OF BREECH CARRIER()
AS PER DRG. NO. 2025298
E
Estab.
3) PRE-MACHINING OF FRAME()
AS PER DRG. NO.4081488 FG-510476
E
Estab.
4) PRE-MACHINING OF SLIDER()
AS PER DRG. NO. 3053053
E
Estab.
5) ASSY. OF PRIMER MAGAZINE()
AS PER PART NO. 1165150 FOR 155 FH GUN
E
Estab.
Category : DDP,DP
Grade : I,II
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) DIP STICK LIQUID QUANTITY TO DRG. NO. 6680-000480[90]()
Specification : DIP STICK LIQUID QUANTITY TO DRG. NO. 6680-000480
C
Estab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) CATCH LOCKING TO PT NO BOF 6125531[90]()
Specification : CATCH LOCKING TO PT.NO.BOF-6125531
C
Estab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) SEATING SPRING TO PART NO 6118954[90]()
Specification : SEATING SPRING TO PART NO.6118954
C
Estab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) VALVE SEATING TO DRG NO BOF 6115657[90]()
Specification : VALVE SEATING TO DRG NO BOF-6115657
1) 9910448016 LEVER CONTROL HAND 2530 017684 ILG 1917 2530 017684[90]()
Specification : 9910448016 LEVER CONTROL HAND (2530-017684), ILG-1917/2530-017684
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9080081598 VALVE ASSEMBLY TO PART NO 1015 000639 IFL 849SA[90]()
Specification : VALVE ASSEMBLY TO PART NO.1015-000639/IFL 849SA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9073001401 CLEANING ROD ASSY DS 1015004164 DRG NO 902 03 100CB[90]()
Specification : 9073001401 CLEANING ROD ASSY DS 1015004164 DRG NO 902 03 100CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9069112496 HOUSING TO DRG NO BOF 3012784[90]()
Specification : 9069112496 HOUSING TO DRG.NO.BOF-3012784
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Grey Iron Foundry
[ENR Registration]
Name
Specification
Use
Status
1) Machining of cylinder by trade outside GIF premises
Description : Machining of cylinder by trade outside GIF premises()
Specification : Job contract for carrying out machining of cylinder as per drawing No. AAIW/BS-0069 outside GIF premises as per special terms and conditions in Annexure A with general terms and conditions
Specification : OBTURATOR TO OFAJ DRG NO. FS-2458A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CAP I 1 TO OFAJ DRG NO FS 2497B[00]()
Specification : CAP I-1 TO OFAJ DRG. NO. FS-2497B OR CQA (A) DRG NO CQA(A)/A MN/2859 DET.1 DC NO. 37271-A DT.08-11-10
C
Nonestab
2) CAP TO OFAJ DRG NO FS 2498B WITHOUT SURFACE TREATMENT[00]()
Specification : CAP TO OFAJ DRG. NO.FS-2498B (WITHOUT SURFACE TREATMENT)
C
Nonestab
3) WASHER TO CQA A DRG NO BW9 440 047 DC 37271 A DT 08 11 10[00]()
Specification : WASHER TO CQA(A) DRG NO.BW9.440.047 DC 37271-A DT. 08-11-10
C
Nonestab
4) CAP TO CQA AMMN DRG NO BW 8 635 063 DC 37271 A DT 08 11 10[00]()
Specification : CAP TO CQA(AMMN.) DRG. NO.BW 8.635.063 DC 37271-A DT. 08-11-10.
C
Nonestab
5) SAFETY LOCK ASSEMBLY TO DRG NO BW 6 042 512 CB DC 34241 A DT 24 09 87[00]()
Specification : SAFETY LOCK ASSEMBLY TO DRG.NO.BW.6.042.512 CB DC-34241-A,DT 24.09.87,CONSISTING OF 4 COMPT.(1)SLIDER TO DRG.NO.BW8.264. 006 (2)CLIP TO DRG.NO.BW8.388.004 (3) CAP TO DRG.NO.BW8.635 006 (2)CLIP TO DRG.NO.BW8.388.004 (3) CAP TO DRG.NO.BW8.6
C
Nonestab
6) DELAY TRAIN TO OFAJ DRG NO FS 2496B OR CQA A DRG NO BW 8 635 111 DC NO 37271 A DT 08 11 10[00]()
Specification : DELAY TRAIN TO OFAJ DRG. NO. FS-2496B OR CQA (A) DRG NO. BW 8.635.111 DC NO. 37271-A DT. 08-11-10
C
Nonestab
7) WASHER TO CQA AMMN DRG NO BW 9 440 010 DC 37271 A DT 08 11 2010[00]()
Specification : WASHER TO CQA(AMMN.) DRG. NO. BW 9.440.010 DC 37271-A DT. 08.11.2010.
C
Nonestab
8) CAP II 1 TO DRG NO DET 1 DC 37271 A DT 08 11 10[00]()
Specification : CAP II-1 TO DRG. NO. CQA(A)/AMN/2860 DET-1 DC 37271-A DT.08-11-10
C
Nonestab
9) GASKET ASSY TO CQA AMMN DRG NO BW 6 472 004 CB DC 35352 A DT 23 7 92[00]()
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]()
Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001
R
Nonestab
2) PROTECTOR FOR COPPER BAND AS PER OFAJ DRG. NO. SM-894 A.[00]()
Specification : PROTECTOR FOR COPPER BAND AS PER OFAJ DRG. NO. SM-894 A.
R
Nonestab
3) THREAD PROTECTOR TO OFAJ DRG NO SM 952[00]()
Specification : THREAD PROTECTOR TO OFAJ.DRG.NO.SM 952
C
Nonestab
4) TRANSIT PLUG TO CQA AMMN DRG NO 155 1065[00]()
Specification : TRANSIT PLUG TO CQA(AMMN)DRG.NO.155-1065,DC 36792-A DT. 01-11-01.
C
Nonestab
5) NOSE ADAPTER TO CQA[00]()
Specification : as per Drawing
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) ROTOR SPRING TO CQA AMMN DRG NO 3 016919 DET 14 DC I 37284 A DT 6 7 2011 WIDTH OF STEEL STRIP TO BE RESTRICTED TO 3 minus 0 point 15 MM[00]()
Specification : ROTOR SPRING TO CQA (AMMN) DRG. NO. 3-016919 DET.-14 DC(I)37284- A DT. 6.7.2011 (WIDTH OF STEEL STRIP TO BE RESTRICTEDTO 3.00 - 0.15 MM)
C
Nonestab
2) BODY SEMI FINISHED TO OFAJ DRG NO FS 1851 E[00]()
Specification : BODY (SEMI FINISHED) TO OFAJ DRG. NO. FS-1851 E
C
Nonestab
3) CAP TO OFAJ DRG NO FS 1160A[00]()
Specification : CAP TO OFAJ DRG.NO. FS-1160A
C
Nonestab
4) MAGAZINE TO OFAJ DRG NO FS 2635 B[00]()
Specification : MAGAZINE TO OFAJ DRG.NO. FS-2635 B.
C
Nonestab
5) ROTOR SLEEVE TO CQA AMMN DRG NO 3 016919 DETAIL 17 DC NO 37284 A DTD 06 JULY 2011[00]()
Specification : ROTOR SLEEVE TO CQA(AMMN) DRG. NO. 3-016919 DETAIL-17 DC NO. 37284-A DTD.06 JULY 2011
C
Nonestab
6) SAFETY DEVICE TO CQA A DRG NO 4 024069 DET 2 DC 35212 A DT 12 11 91[00]()
9) SAFETY CAP TO CQA A DRG N0 3 016919 DET 26 DC 37284 A DT 6 7 2011[00]()
Specification : SAFETY CAP TO CQA (A) DRG. N0. 3-016919 DET-26 DC-37284-A DT.6 -7-2011
C
Nonestab
10) DETENT SLEEVE SPRING FOR PART NO 29 TO CQA A DRG NO 3 016919 DET 30 DC 37284 A DT 6 7 2011[00]()
Specification : DETENT SLEEVE SPRING FOR PART NO. 29 TO CQA(A) DRG. NO.3-016919 DET-30 DC-37284-A DT.6.7.2011
C
Nonestab
11) DETENT SPRING DET 31 FOR PART NO 28[00]()
Specification : DETENT SPRING DET 31 FOR PART NO 28
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) BLANK FOR SAFETY CAP TO OFAJ DRG NO FS 2955 FOR FUZE 162 MK 8 AND MK 9[00]()
Specification : BLANK FOR SAFETY CAP TO OFAJ DRG. NO. FS-2955 FOR FUZE162 MK-8 & 9.
R
Nonestab
2) STRIKER TO CQA AMMN PART NO DRG NO QX 331 DC I 37263 A DT 26 08 10[00]()
Specification : STRIKER TO CQA(AMMN) PART NO (DRG.NO.) QX-331 DC(I) 37263-ADT.26.08.10
C
Nonestab
3) BODY TO CQA A DRG NO IQX 239 DC 35434 A DT 30 12 92[00]()
Specification : BODY TO CQA (A) DRG.NO. IQX-239 DC-35434-A, DT. 30.12.92
C
Nonestab
4) CAP TO CQA AMMN PART NO DRG NO QX 438 DC I 37326 DT 03 12 12 WITHOUT SURFACE TREATMENT AND EMBOSSING[00]()
Specification : CAP TO CQA(AMMN.) PART NO.(DRG.NO.) QX-438 DC(I) 37326-DT.03/12/12 (WITHOUT SURFACE TREATMENT AND EMBOSSING)
C
Nonestab
5) DETENT SPRING TO CQA A DRG NO IQX 348 DC 36897 ADT 29 04 2003[00]()
Specification : DETENT SPRING TO CQA(A) DRG.NO.IQX-348 DC-36897-ADT.29.04.2003.
C
Nonestab
6) STRIKER SPRING TO CQA A DRG NO IQX 341 DC 36897 A DT 29 042003[00]()
Specification : STRIKER SPRING TO CQA(A) DRG.NO.IQX-341 DC-36897-ADT.29.04.2003
C
Nonestab
7) SHUTTER SPRING TO CQA AMMN DRG NO QX 344 DC 36103 A DATED 29 03 1996[00]()
Specification : SHUTTER SPRING TO CQA(AMMN) DRG.NO.QX-344, DC-36103-A DATED29.03.1996.
C
Nonestab
8) SHUTTER TO OFAJ DRG NO FS 957C[00]()
Specification : SHUTTER TO OFAJ DRG. NO. FS-957C.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CUP (EMPTY) FOR DEONATOR 356 MG[64]()
Specification : DRG.NO.QX-803,D. NO. D3(L)3934/F/83 DC NO.36103 A, DT.29.03.96 SCANNED ON DATE-9.5.2011
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CUP 4A 5 FOR A30 T DET[65]()
Specification : CUP 4Y 5 FOR A30 T DET TO DRG NO. FOR PRIMER DETONATOR A-30-T CQA(A)/AMMN/2856, DC NO-37271.A DT. 08.11.10 SCANNED ON DT DT. 05.01.2011.
C
Nonestab
2) CAP KG 4 FOR A30 T DETONATOR[65]()
Specification : CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) TOP PLUG TO OFAJ DRG.NO:S-78C (REF. DRG.NO.4079922[62]()
Specification : OFAJ DRG.NO:S-78C (REF.DRG.NO.4079922,DC NO.36817-A, DT.08.03.2002,DULY SURFACE TREATED AS PER DRG.NO.5191819,
DC NO.34810-A, DT.05.03.90 (PRF FOR 155MM M-107 & M77B )
C
Nonestab
2) PLUG REPRESENTING FUZE B 429B TO DRG.NO:CQA[63]()
Specification : DRG.NO:CQA(A)/AMN/1669 PART NO:ISX-266,DC NO-35494-A, DT. 29.04.93
C
Nonestab
3) CASE TO DRG.PART NO.QX-172,DC NO. 35639-A[63]()
Specification : DRG.PART NO.QX-172,DC NO. 35639-A DT.28.12.93, MATERIAL SPECN:COPPER ALLOY STRIP TO IS:3167-1982 (FIRST REVESION)(RA 2009)WITH HARDNESS 55 TO 75 VPN)
C
Nonestab
4) DISC TO PART NO.QX-41AF,ITEM NO:2 MATERIAL SPECN: LEAD[63]()
Specification : PART NO.QX-41AF,ITEM NO:2 MATERIAL SPECN:LEAD TIN FOIL TO JSS:9535-06-2010(REV.NO-2),DC NO:4085-ME, DTD.08.09.2010(FOR CAP 78G). NOTE:TOP OF THE TIN FOIL DISC TO BE COATED WITH VARNISH SHELLAC.
C
Nonestab
5) CAP COMPLETE (3 G CAP EMPTY) TO REF. NO.DD(L)17235 FOR CARTG[65]()
Specification : REF. NO.DD(L)17235 FOR CARTG. 3G/51MM,SHEET-1 DC-36972-A,DT.27.07.04,SHEET-2 DC 36972-A DT.27.07.04.
C
Nonestab
6) FIRE TRANSMITTING TUBES MKG.51MM TO ARDE-1934,[65]()
Specification : ARDE-1934, IRW 203. DC NO.37068-A DT.03.09.2019.
C
Nonestab
7) ANVIL FOR CARTG.3G/51MM TO DRG.NO. DDL-12002, ASSY. DRG.DD(L)[65]()
Specification : DRG.NO. DDL-12002, ASSY. DRG.DD(L)17235 FOR 51MM MORTAR BOMB. DC NO-37286-A ,DT-09.09.2011
11) NOSE FUZE TYPE A 670M (EMPTY) FOR 30MM BMP-II AMMN. TO CQA(A) DRG.NO.[63]()
Specification : CQA(A) DRG.NO.bw.3.140.039.cb/c,DC-34241-A,DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF).PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040,SHEET NO.Bw.3.140.039 II M/c (12
C
Estab
12) BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12[62]()
Specification : DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12 [USING WITH BODY (ALTERNATIVE) TO DRG.NO.bW 8.035.085/C SHEET 3 & 4 DC NO.34640-A,DT-9.6.89]. REF:(1) BODY WITH BAND ASSY. DRAWING bw 5.500.113 Cb/c DC(1)-34183-A Dt.28.07.87(2) BODY WITH DR
Specification : 25.41MM(L)X13MM(W)X0.3MM(T) SEAL TIN(FOR STEEL TAPE BANDING SIZE 13MM WIDE)APPROX. SIZE 25.41MM LENGTH X 12.7MM WIDTH X 0.3MM THICK AND BAND OF 90 DEGREE ANGLE BOTH SIDE LONGITUDINALLY WITH HEIGHT 6.3MM.
C
Nonestab
14) KEY AMMUNITION 39A TO DRG PART NO. IUX 144A,DC NO.35916-A[61]()
Specification :DESIGNER REF NO: CIA/AMN/2208, DRG PART NO: IUX 144A, DC NO.35916-A,DT.21.02.95 TO SPECN. CQA(A) 1817(t) DC 37096-A, DT.06.03.2007.
C
Nonestab
15) SCREW SET SLOTTED HEAD,FULL DOG POINT NO.2BA TO DESIGNER'[62]()
16) ELECTRIC FUZE UNCHARGED TO DRG.NO: 3-027321-4B2-Cd-8, DCI.33760A, DT.04.06.1985[63]()
Specification : DRG.NO: 3-027321-4B2-Cd-8, DCI.33760A,DT.04.06.1985.SPECIAL REQUIREMENT: RESISTANCE ACROSS THE POINTS OF Pt-Ir WIRE SHOULD BE 1.4 TO 1.8 OMHS.
C
Nonestab
17) DISC TO DRG.3-027321-4B2-24,DC NO: 36894-A[63]()
Specification : DRG.NO.3-027321-4B2-24, DC NO.36894-A,DT-21.04.2003 (thickness-0.22mm)
3) MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG[70]()
Specification : MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG
C
Nonestab
4) LINK HAMMER FOR PISTOL AUTO 9MM 1A.[70]()
Specification : LINK HAMMER TO DS CAT NO. 3040-003489 (LTDC 26826-SA DATED 06.05.2016) (MACTROTECH TEST TO ASTME 381-1984 WILL BE AS PER COL. (C) OF SL. NO. 1 OF CQA (SA) NOTE SHEET NO. 1) AND (NMIR TEST TO IS: 4163 WILL BE AS PER COL. (C) OF SL. NO. 3
C
Nonestab
5) EXTRACTOR FOR 9MM AUTO PISTOL 1A.[70]()
Specification : EXTRACTOR TO DS CAT NO.5120-007879(LT.DC-26820-SADT.26.04.16(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PER COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.1.)& (NMIR TEST TO IS:4163 WILL BE AS PER COL.(C)OF SL.NO.3 OF CQA(SA) NOTE SHEET NO.
C
Nonestab
6) TUBE LOWER FOR RIFLE 5.56MM INSAS FOLDABLE BUTT (STEEL)[70]()
Specification : TUBE LOWER TO DRG.NO.ARDE SK 2975/11. FOR RIFLE 5.56MM INSAS FOLDABLE BUTT(STEEL).[AL.ALLOY TO IS:738-243451'W'(HT15-OLD DESIG)WITH PROTECTIVE FINISH ANODISED TO COLOUR BLACK].
C
Nonestab
7) FLASH ELIMINATOR FOR RIFLE 5.56MM LMG (TO BE USED IN RIFLE 5.56MM EXCALIBUR)[70]()
Specification : FLASH ELIMINATOR FOR 5.56MM LMG TO DS CAT NO.1005-007962 (ARDE SK NO 2689/224) (TO BE USED IN RIFLE 5.56 MM EXCALIBUR)
C
Nonestab
8) LEVER SLIDE LOCKING (SEMI FINISHED) FOR FOR PISTOL AUTO 9MM 1A.[70]()
Specification : LEVER SLIDE LOCKING BLANK AS PER RFI SK 8035*3 FOR PISTOLAUTO 9MM 1A
C
Nonestab
9) BLANK OF BODY (70X42X220)MM FOR 12 BORE PUMP ACTION GUN[70]()
Specification : BLANK OF BODY (70X42X220)MM TO DRG.NO.RFI SK.NO.8714 B,GRADEALUMINIUM ALLOY DTD.5124 FOR 12 BORE PAG.
20) CONNECTOR BUTT EXR. FOR 5.56MM EXCALIBUR[70]()
Specification : CONNECTOR BUTT EXR. FOR 5.56MM EXCALIBUR TO RFI SK.NO.7326
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6078000600 CAP CONDUCTING COMP EMPTY 105MM TK SH[60]()
Specification : CAP CONDUCTING COMPOSITION EMPTY DRG PART NO. QX-115 A DC.NO.36230-A DATED 29-01-97 SPEC NO. L 10155 A (B) DC NO. 31887-A DATED 12-03-76
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6261102300 ADAPTER DRG PT SX 701 FOR 105MM TKS[62]()
Specification : ADAPTER TO DRG PT NO SX-701 DC 35779-A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6454000051 SQUIB PLG BRIDGED TO ERDL DRG 1096[64]()
Specification : HEMRL/PYRO/PS/207(C).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0101012130 SEAL TO DRG NO. 6390 155 RE 1[01]()
Specification : SPECN NO. IS-5872-1990
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141800106 WASHER SPRING ITX-240 MINE AP 1B DR[61]()
Specification : WASHER, SPRING FOR ASSLY OF MINE AP 1B DIRECTIONAL.
Specification : OBTURATING DEVICE TO DRG NO.3-027321 DET.NO.CD1 DC NO.35893-A CONSISTS OF 1) SCREW DET.NO.1 DC NO.35802-A2) CONICAL SHUTTER DET.NO.2 DC NO.35802-A 3) BUSH DET.NO.3DC NO. 35802-A 4) RING DET.NO.25 DC NO.36050-A (WITHOUTPAPER DISC DET.NO.4
C
Nonestab
2) 6419000027 PRIMER GUV 7 E COMPLETE FOR 125MM[64]()
Specification : EMPTY COMPONENTS OF PRIMER GUV-7, CONSISTING OF BODY TO DRGNO. 3-027321 DET 5, CUP DET 7, OBTURATOR DET 8, COVER OFOBTURATOR DET 10, CLAMPING BUSH DET 15, PACKING RING DET 6,CLAMPING NUT & BASE ASSLY DET CD4 AND OBTURATING DEVICE C
2) 6261109200 S D ARMING 6 1 E FOR 105MM TKSH[62]()
Specification : SHUTTER DELAYED ARMING EMPTY NO 6/1 TO DRG.PT.NO.QX-178-A,DC-35465-A,ITEM LIST FOR QX-178-A DC 35465-A DT.4.3.93.SPECN : L-10360(C) DCI-31888-A.
C
Nonestab
3) 2103218073 SLEEVE L1 03 ID30MM RUDRA[21]()
Specification : SLEEVE SIZE: 103MM LONG X 32.5MM OD X 30MM IDDRG.NO.ARDE/2237 DETL.1SPCN:HDPE TO SPECN NO.7330-03 GRADE-`C' TYPE-2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6192355925 MAGAZINE ARDE 1146 DET NO 27[61]()
Specification : MAGAZINE TO DRG. NO. ARDE-1146 DETAIL NO.27 AL. NO.312 DT.13.9.77 FOR ROCKET 68 MM HE.
C
Nonestab
2) 6078000021 ELECTRIC BRIDGE WIRE CAP FOR FSAPDS[60]()
Specification : ELECTRIC BRIDGE WIRE CAP FOR PRIMER OF 120 MM AMMUNITION TODRAWING NO. HEMRL/PYRO/H/SK.021NOTE- THE RESISTANCE OF EACH EMPTY CAP SHOULD BE 1.5 OHM+ / - 0.3 OHM I.E. FROM 1.2 OHM TO 1.8 OHM
C
Nonestab
3) 6273200062 PRF FOR SHELL 155MM ERFB BB[62]()
Specification : PRF FOR SHELL 155MM ERFB (BB/BT)/NASCHEM TO DRG. NO.PROJ/155/NASCHEM/085
E
Nonestab
4) 6330120015 PRF 117 MK 20 STL105MM IFG HE INRT[63]()
Specification : PLUG, REPRESENTING, FUZE 117 MK20 (STEEL) TO CQA(A) PART NO.ISX-475 DC-36981-A DT.12/09/04
E
Nonestab
5) 6044000162 PRF 162A FOR BOMB 120MM MORTAR HE[60]()
Specification : PLUG REPRESENTING FUZE NO.162 A TO DRG. PART NO. ITV-17 TODC NO. 37393-A DT. 22-12-2015 FOR BOMB 120 MM MORTAR INERT, FUZED A, PLUGGED A TO DRG. PART NO. ITV 7 GA TO DC NO.37393-A DT. 22-12-2015.
E
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1410052010 CUP AND CAP FOR FUZE B429E[14]()
Specification : CUP & CAP FOR MAGAZINE TO DRG. NO. PROP/SK-443 FOR RECTIFICATION OF FUZE B-429E.
C
Nonestab
2) 6191700029 VT HOLDER MOD FOR PINAKA RKT[61]()
Specification : VT HOLDER MODIFIED FOR PINAKA ROCKET SYSTEM TO ARDE DRAWING NO. 8603 03 99 00 02 001 00DA
C
Nonestab
3) 6043000400 ADAPTER NOSE FOR 81MM MK 1L TV 44[60]()
Specification : ADAPTER NOSE MORTAR BOMB NO. 1 TO DRG.PT.NO. TV 44 DC 36904-A DT.20/06/2003.
C
Nonestab
4) 6576773398 AMN CONTAINER BOX C 53A ISV 574 A[65]()
Specification : AMMUNITION CONTAINER BOX C 53-A (STEEL) FOR PACKING OF 130MMAMMUNITION TO DRG. PART NUMBER ISV 574-A DC NUMBER 37047-A DATED 20/03/2006.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6120909501 BASE METALLIC FOR SCCC 125 MM AMMN[61]()
Specification : BASE TO CQA(A) DRAWING NUMBER 3-026892, DETAIL 1, DC-37240-ADATED:17-12-2009.
C
Nonestab
2) 6572432607 BOX N34 MK2 E AL DRG NO NAD 438911[65]()
Specification : BOX N 34, MARK 2-EMPTY (ALUMINIUM) DRG. NO. NAD-4389/1DT. 19.08.77 FOR PACKING OF CDSC 0.5 KGS
C
Nonestab
3) 6141156300 CAPSULE PT DRG NO IQX 514[61]()
Specification : CAPSULE (ALUMINIUM-STRIP/WIRE) TO DRG.PT.NO. IQX 514DC-36852-A DT.23.9.02.
C
Nonestab
4) 6572900000 CARRIER 6A L STEEL DRG NO ISV 354A[65]()
Specification : CARRIER 6A/L STEEL COMPLETE WITH ALL FITMENTS DRAWING NO.ISV354-A DC-37214-A,SPECN. NO. IA-1169(N) DC 35576-A, SHOULD BEPAINTED WITH READY MXD PAINT AIR DRYING MATT FINISH SPRAYINGFOR GENERAL PURPOSE "OLIVE GREEN R.M.A.R. MATT FINISH GP T
C
Nonestab
5) 6410900140 CLAMPING BUSH DET 15 PRIMER GUV 7[64]()
Specification : CLAMPING BUSH TO DRG.NO.3-027321, DETAIL NO.15 DC 36050-AFOR PRIMER GUV-7
C
Estab
6) 6410900120 COVER OF OBTURATOR DET 10[64]()
Specification : COVER OF OBTURATOR TO DRG.NO.3-027321 DET.NO.10 DC-36050-ADT.5/12/95 FOR PRIMER GUV-7.
C
Estab
7) 6419000075 DETONATING DEVICE FOR FZ B15 EMPTY[64]()
Specification : DETONATING DEVICE FOR FZ. B15(EMPTY)TO 3-024045,DRG.NO.IQX-73 GE(WITHOUT SUB.ASSY.CD-2.2 & SED(3X1)CONST.OF(1)SUB.ASSY.CD-2.9(2)SUB.ASSY.CD-2.1(3)SUB.ASSY.TO DET 2.21(4)CONTACT TODET 2.12(5)NUT TO DET 2.16(6)LOOSE COMPONENTS CAP TO DET 2.
C
Nonestab
8) 1753011414 NAIL WIRE MS IS 723[17]()
Specification : M. S. NAILS WIRE ( GALVD ) AS PER SPECN: IS: 723 - 1972(AMENDMENTS -3) (FIRST REVISION) R.A-1996 SIZE - 1 1/2" X14 GAUGE.
C
Nonestab
9) 6410900990 OBTURATOR DET NO 8 PRIMER GUV 7[64]()
Specification : OBTURATOR TO DRG.NO.3-027321, DETAIL NO.8, DC-36050-ADT.05-12-95 FOR PRIMER GUV-7.
C
Nonestab
10) 6411900045 SPARK ELECTRIC DETONATOR FOR FZ B15[64]()
Specification : SPARK ELECTRIC DETONATOR,CQA(A)DRG.NO.IQX-93A DC 35089-A/RUSDRG.NO.3-022859 CD DC 35323-A,CON.OF(1)BODY CD3 DC 35416A(2)CAP DET.4 DC 35811A(3)SPRING DET.5 DC 35971A(4)SCREW DET.6OR6B DC 35811A(5)CONTACT CAP DET.7 DC 36028A,SUBJECT TO ACCE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330432100 SCRW SLOTD HD 2BA FULL DOG CT AMN[63]()
Specification : SCREW,SET,SLOTTED HEAD, FULL DOG POINT NO.2B,A,TO DESIGNER'S REF: CIA/AMN/885,DC-33833-A.
C
Nonestab
2) 1749009905 RIVET ITX 239 MINE AP 1B DIR[17]()
Specification : RIVET TO DESIGNERS REF.ARDE-1521 DET NO.6 DRG.PT.NO. ITX-239 DC 35824-A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0133030123 ERA MOUNTING PLATE ASSY STD[01]()
Specification : ERA MOUNTING PLATE ASSEMBLY (STD) AS PER DRG NO. CVRDE/DV/ERA STAND/01-S & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFERNER PLATES
C
Nonestab
2) 0133030122 ERA MOUNTING PLATE ASSEMBLY TOP[01]()
Specification : ERA MOUNTING PLATE SEEMBLY ( TOP) AS PER DRG NO. CVRDE/DV/ERA STAND/01-T & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFENER PLATES
2) 6043000210 BOMB BODY 81MM MOR C EMP ITV 9A[60]()
Specification : CQA(A) 2305(M)
C
Nonestab
3) 6330130100 FZ 117 DA MK 20 E WITH CAP[63]()
Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3.
C
Estab
4) 6380800110 IGNITION TUBE IRW 92 FOR 120 MM HE[63]()
Specification : IGNITION TUBE TO DRG. NO. IRW 92, DESIGNER'S REFERENCE NO. CIA/AMN/706 DC 34760-A FOR BOMB 120 MM HE.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6410900880 CUP FOR PRIMER GUV-7[64]()
Specification : DRG.NO.3-027321,
C
Nonestab
2) 6410900380 DEVICE DETONATING DUMMY FOR FZ B15[64]()
Specification : DUMMY DETONATING DEVICE TO DRG. NO. 3-26155
Specification : SHELL 105MM IFG HE A/L DRAWING PART NO.ISX 46 GE (2-SHEETS) DC NO. 36784-A DATED 20-9-2001
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330600190 RING SEALING DRG.3-016919 DET-52[63]()
Specification : SPECN.JSS 4720-02
C
Nonestab
2) 6270600410 ADAPTER 2 013535 53 D FOR FZ B429[62]()
Specification : ADAPTER TO DRG.NO.2-013535/53-OQ-482M,DET.NO.9,DC 36685-A FOR SHELL 130 MM.
C
Nonestab
3) 6330604400 HOLDER DELAY FOR FZ B429[63]()
Specification : DELAY HOLDER TO DRG. NO. 3-016919,53-B-025Y, DET.NO.40 DC-37284-A FOR FUZE B-429
C
Nonestab
4) 6330604500 SLEEVE REGULATOR PT 42[63]()
Specification : REGULATOR SLEEVE TO DRG. NO. 3-016919, 53-B-025Y,DET.NO.42, DC 34858-A FOR FUZE B-429.
C
Nonestab
5) 6330604970 PLUG REPRESENTING FUZE B429[63]()
Specification : PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6575500000 CYLINDER 239MK5 STEEL TEAR OFF BAND[65]()
Specification : CYLINDER 239 MK 5/L TIN PLATE WITH TEAR OFF BANDS DESIGNER REFERENCE NUMBER D-7(L) 1509/A/326 DC 34595-A PT.NO.SV-55A REQUIRED FOR PACKING OF AMMUNITION ROCKET 68 MM HE.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6571341952 CARRIER 13 A (OG), ISV 488-A[65]()
Specification : SPECN.NO. IA 1169
C
Nonestab
2) 6571442459 CARRIER 13A (BG) TO ISV 488A[65]()
Specification : SPECN. NO. IA 1169
C
Nonestab
3) 6570950402 CONTAINER 3RK 33 METAL FOR 125MM[65]()
Specification : CONTAINER CONSISTING OF THE FOLLOWING ITEMS
1.BODY DET. NO. 010
2. COVER DET.NO. 020
3.BOLT DET. NO. 030
4. FORK DET.NO 005
C
Nonestab
Category :
Grade : Grade III
Size :
S
1High Explosive Factory
Name
Specification
Use
Status
1) FILLING HOLE PLUG[10]()
Specification : DESIGN.REF CIA/AMN/1799 DET NO. 8 PART NO. ITW 69 SA DC 35817-A SPECN. NO. CQA(A) 1504(E) DC 35870
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1High Explosive Factory
Name
Specification
Use
Status
1) RETAINING PIN & RING[10]()
Specification : DES REF.NO. CIA/AMN/1799 DET NO.6 PART NO ITW 10 SA DC 35817-A SPECN NO.CQA(A) 1504(E) DC 35870
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1High Explosive Factory
Name
Specification
Use
Status
1) STRIKER DET[10]()
Specification : CQA ( A ) DRAWING NO. ITW - 6 GE & PART NO. ITW/67
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1High Explosive Factory
Name
Specification
Use
Status
1) STRIKER LEVER[10]()
Specification : CQA ( A ) DRAWING NO. ITW - 6 GE & PART NO. ITW/67
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1High Explosive Factory
Name
Specification
Use
Status
1) SET OF PROFEEL[10]()
Specification : DRG NO. CQA(A)/AMN/3194 DC 36847A, DRG NO. CQA(A)/AMN/3195 DC 36847A , DRG NO. CQA(A)/AMN/3196 DC 36847A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1High Explosive Factory
Name
Specification
Use
Status
1) FILLING HOLE PLUG (ALUMN)[10]()
Specification : DESIGN. REF CIA/AMN/1799 DETAIL NO. 8 PART NO. ITW -69 DC 35817-A SPECN CQA(A) 1504(E) DC 35870-A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1High Explosive Factory
Name
Specification
Use
Status
1) KEY AMMUNITION[10]()
Specification : 19 B DESGN.REF NO. CIA/AMN/1373 PT.NO.IUX 96 A DC 33857-A
Specification : DESIGN.REF CIA/AMN/1799 DET NO. 8 PART NO. ITW 69 DC 35817-A ,SPECN. NO. CQA(A) 1504(E) DC 35870-A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1High Explosive Factory
Name
Specification
Use
Status
1) STRIKER DET[10]()
Specification : CIA/AMN/1799 DET NO.3 PART NO.ITW-65 DC 35817-A SPECN.NO. CQA(A) 1504(E) DC 35870-A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1High Explosive Factory
Name
Specification
Use
Status
1) SET OF PROFEEL[10]()
Specification : (1) PIECE PACKING BOTTOM TO DRG NO. CQA(A)/AMN/3194 DC 36847A (2) PIECE PACKING MIDDLE TO DRG NO. CQA (A)/AMN/3195 DC 36847A (3) PIECE PACKING TOP TO DRG NO. CQA (A)/AMN/3196 DC 36847A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) WINCH RAMP ASSY LH TO CAT SECTION and CAT PART NO 14 5420 000137 AND DRG CAT NO 23709 B[00]()
Specification : WINCH, RAMP ASSY. LH TO CAT SECTION & CAT/PART NO.14/5420-000137 AND DRG./CAT NO.23709/B
C
Nonestab
2) WINCH RAMP ASSY RH TO CAT SECTION and CAT PART NO 14 5420 000138 AND DRG CAT NO 23709 B[00]()
Specification : WINCH, RAMP ASSY. RH TO CAT SECTION & CAT/PART NO.14/5420-000138 AND DRG./CAT NO.23709/B
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) LOWER SET FOR MORTAR BOMB 51MM ILLG.()
CQA(A) 2328 & CQA(A) 2332
C
ESTAB
2) TAIL ADAPTER FOR MORTAR BOMB 51MM SMOKE()
CQA(A) 2352
C
ESTAB
3) TAIL UNIT NO. 2A FOR MORTAR BOMB 120 MM ILLG.()
4) CANISTER ASSY. FOR SHELL 155MM ILLG. M1A1[62]()
Specification : DRG. NO. 2440A13003 DC-36552-A
C
Nonestab
Category : P
Grade : II
Size :
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BODY ASSY-4-26941-060 FOR(81MM SMK) (9911355970)[99]()
Specification : BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ADOPTER BUSH TO DRG NO 4 26941 007 Lf 9911358269[99]()
Specification : ADOPTER BUSH TO DRG NO.4-26941-007 DC NO.35878-A DTD. 20.12.94
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SEALING RING PART NO 6413420 LF 9911358427[99]()
Specification : SEALING RING PART NO. 6413420 TO OEM DRG.NO.301079691/ TRD.DRG.NO. 1.2.2597
C
Nonestab
2) BOOSTER HOUSING PART NO 5229169 LF 9911358424[99]()
Specification : BOOSTER HOUSING PART NO.5229169 TO OEM DRG.NO.304084449/ TRD.DRG.NO. 3.2.2653
C
Nonestab
3) BOOSTER CUP PART NO 4102996 LF 9911358399[99]()
Specification : BOOSTER CUP PART NO.4102996 TO OEM DRG.NO.304075972/ TRD.DRG.NO. 3.2.2552
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARBON NOZZLE BLANK FOR 84 HEAT 551 LF 9911357920[99]()
Specification : CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.
C
Nonestab
2) ARMING DEVICE CASINIG ASSY FOR 551 Lf 9911357821[99]()
Specification : ARMING DEVICE CASING ASSY TO DRG.NO.5209 556.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SELF TAPPING SCREW DRG 121932 LF NO 9911357650
Description : SELF TAPPING SCREW DRG 121932 LF NO 9911357650()
Specification : SELF TAPPING SCREW TO DRG NO.TRD 121932
C
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SHUTTER SPRING TBRL LF NO 9911358297
Description : SHUTTER SPRING TBRL LF NO 9911358297()
Specification : SHUTTER SPRING TO DRG. NO. TBRL/MMG-H/MK1/031/R1
C
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SHUTTER PLATE TBRL LF NO 9911358300
Description : SHUTTER PLATE TBRL LF NO 9911358300()
Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0
C
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) Rolling Ring Assy for 500Kg GP LF 9911358586[99]()
Specification : Rolling Ring Assembly for 500Kg GP Bomb
C
Nonestab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) 1st SET OF 4 ITEMS FOR MMHG LF NO 9911358524
Description : 1st SET OF 4 ITEMS FOR MMHG LF NO 9911358524()
Specification : 1ST SET OF 4 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.1.Rivet for Top Plate (Qty.-2 NOS.) TBRL/MMG-H/MK-1/016/R0 2.Plunger Spring TBRL/MMG-H/MK-1/029/F0 3.Conical spring (Qty-2nos) TBRL/MMG-H/MK-1/030/R0 4.Safety Pin, TRD-1-1-3047
C
Nonestab
Category : p
Grade : 3
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) PLUG REPRESENTING FUZE FOR 40MM LOW[60]()
Specification : PLUG REPRESENTING FUZE FOR 40MM LOW VELOCITY AMMN. TO DRG. NO. ODC/AFK-120-18
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) CAP CHAMBER MODIFIED FOR DET 36M 4 SEC DELAY[64]()
Specification : CAP CHAMBER (MODIFIED) FOR DET. 36M, 4 SEC DELAY AS PER DRG. NO. AFK/SK 874-18 DT 28-07-2018
Specification : DRG.NO. MD SK 1208/7 DT.14.12.1964.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) IGNITER FOR ROCKET 140 MM EMPTY ASY[60]()
Specification : 1)BODY(CONTAINER) TO DRG.NO. NASK 776/9/1/1/1 (PROVISIONAL)DT. 13-5-04 QTY.1 NO. 2)DISC TO DRG NO.NASK 776/9/1/1/2 (PROVISIONAL) DT. 29-5-01 QTY 2 NOS 3) BODY (LID) TO DRG NO. NASK 776/9/1/2/1 (PROVISI ONAL) DT.29-1-04 QTY 1NO.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]()
Specification : CQA (A) 2316
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) SET OF 13 COMPONENTS FOR SUB ASSEMBLY FOR PYROJACK DRG NO. PTA-L-52-01-01-001-X[99]()
Specification : DRG NO. PTA-L-52-01-01-001-X DT. 08-05-2001 13 COMPONENTS AS PER LIST ENCLOSED
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Debarred
Name
Specification
Use
Status
1) CHAFF PAYLOAD FOR SRCR, MRCR, LRCR[61]()
Specification : Please refer Expression of interest attached.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) SQUIB ASSY (EMPTY) FOR PYRO CTG.[60]()
Specification : NASK 856 (PROVISIONAL)
C
Nonestab
2) SET OF PYRO SQUIB OPERATOR II-253ME[60]()
Specification : DRG .NO. NASK--- 1089/1 (PROV.)
C
Nonestab
3) SQUIB PLUG BRIDGED FOR IGNITER[60]()
Specification : DRG. NO. ERDL,1164 DET. 2
C
Nonestab
4) COMPONENTS FOR SQUIB PSQ 6[60]()
Specification : 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG. NO. PTA-L-54-01-01-103-X
C
Nonestab
5) BRIDGED SQUIB[60]()
Specification : DRG. NO. ERDL; 1320 DET. NO. 5. FOR SAM 5B-87 DT. 09.10.98
Specification : DRG NO OFDR/BOMB 51MM ILLG/SMK/114
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF 9 COMPONENTS FOR FLARE TRIP WIRE[64]()
Specification : CIA 3807 (b) [ DRG NO. DD(L) 13461-A/1]
C
Estab
2) SPOOL COMPLETE (ITEM NO. 18) POLY MOULDING FOR FTW[64]()
Specification : DRG. NO. DD(L) 13461-A/1
C
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH GREEN[60]()
Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER
C
Nonestab
2) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH ILLUMINATING[60]()
Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CASE CARTG. FOR 16MM RED[60]()
Specification : CQA(A) 3811 Drg. No. ARDE1878 DET 1 IQW-151
C
Estab
2) CUP HDPE FOR SHELL 84MM ILLG.[62]()
Specification : F-1301-56251-A
C
Nonestab
3) BOTTOM PLATE WITH SWIVEL FOR 84 MM ILLG.[62]()
Specification : SPECN. F 1301-903400 CLAUSE -3 & 6 DRG.NO. F-1301-054860 F DC(I) 34754 A
Specification : DRG. NO. ARDE 2222 DET 2 PT NO ITV 254 SPECN : CQA(A) 2345 (C)
C
Nonestab
4) Tail Unit 11Afor 81mm Illg. MK-II [62]()
Specification : DRG.NO ARDE 2222 DET 4 PT NO ITV 38A SPECN: CQA(A) 2346 (d)
C
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF BODIES ASSEMBLED FOR 81MM ILLG.2A CONSISTING OF1)BODYUPPER DRG.NO.ARDE 2222 DET.NO.2 PT.NO.ITV-254 DC 37118A DT. 20.06.07 TO SPECN.CQA(A) 2345(c)DC-36513A DT.25.1.99 2)BODYSET OF ASSEMBLED BODIES 81MM ILLG.[62]()
Specification : SET OF BODIES ASSEMBLED FOR 81MM ILLG.2A CONSISTING OF1)BODYUPPER DRG.NO.ARDE 2222 DET.NO.2 PT.NO.ITV-254 DC 37118A DT. 20.06.07 TO SPECN.CQA(A) 2345(c)DC-36513A DT.25.1.99 2)BODYSET OF ASSEMBLED BODIES 81MM ILLG.
1) SET OF PARACHUTES FOR SHELL 155MM ILLUMINATING[63]()
Specification : SET OF PARACHUTES FOR SHELL 155MM
ILLG CONSISTING OF:
1) PARACHUTE TO DRG.NO.2440A03041
DC36552A DTD.24/04/1999.
2) DROGUE PARACHUTE TO DRG.
NO.2440A20015 DC 36552A DTD.24/04/1999
WITH GORE TO DRG.NO.2440A20017 DC
36552A DTD. 24/04
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) A SET OF LID, BOOSTER TUBE, CASE RING[62]()
Specification : (1) LID TO DRG. NO. ARDE 2024/26 AMDT. NO. AL NO. 671 DT. 29-5-91 (2) BOOSTER TUBE TO DRG. NO. ARDE/2024/21 AMDT. NO. AL NO. 616 DT 4-10-88 (3) CASE AND RING ASSY TO DRG. NO. ARDE 2024/18 AMDT. R.NO. 1 DATED 25-8-86.
Specification : DRG.NO.ARDE 2024 DET NO 28 DRG NOS(1)ARDE 2024/29,(2)ARDE 2024/30,(3)31 (SHTS2),(4)32,5)34 WITH CIRCLIP LIGHT A75IS:3075/1975 Gd.10R2 AND MULTITOOTH LOCK WASHER B6-4 IS : 5371-1982 SPRING STEEL.
C
Nonestab
3) A SET OF LID, BOOSTER TUBE, CASE RING[62]()
Specification : (1) LID TO DRG. NO. ARDE 2024/26 AMDT. NO. AL NO. 671 DT. 29-5-91 (2) BOOSTER TUBE TO DRG. NO. ARDE/2024/21 AMDT. NO. AL NO. 616 DT 4-10-88 (3) CASE AND RING ASSY TO DRG. NO. ARDE 2024/18 AMDT. R.NO. 1 DATED 25-8-86.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF COMPONENTS FOR SHELL 105MM ILLG 2A[62]()
Specification : CQA(A) 4928
C
Nonestab
2) SET OF 8 COMPONENTS FOR SHELL 105MM SMOKE[62]()
Specification : DRG. NO. CQA(A) 4921
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CASE ASSY. FOR SHELL 84 mm Illg[62]()
Specification : F-1301-902340(C)
C
Nonestab
2) TAIL UNIT 2A FOR MORTAR BOMB 120 MM ILLG.[63]()
Specification : CQA(A) 2342[DRG.NO. CIA/AMN/1397,PART NO. ITV 11 A
Specification : DRG.NO. ARDE 2011 DET NO. 19 PARTNO. ITV 149 DC (I) 34732 - A DATED 30-09-1989 METAL STEEL TO SPFCN IS 1079 2009 (REVISION NO. 6)GR EDD OR DD AND SPECN.CQA (A) 2321 (b) DC NO.36952-A DT.16-03-04.
C
Nonestab
9) COLLAR FOR 120MM ILLG.[63]()
Specification : DRG.NO.ARDE 2011 DET 8 PT NO.ITV - 158 DC (I)36931 (A) DT.14.11.03. MATERIAL SPECN.IS 1570C-20 SPECN.NO.CQA (A) 2321 (b) DC-36952 A dt.16/3/04.
Specification : DRG. NO. ARDE - 2011 , DET NO. 21 PT. NO.ITV-150 SPECN NO. CQA (A) 2321 (b)
C
Nonestab
18) PIN SHEARING 120MM ILLG.[63]()
Specification : DRG.ARDE 2011,DET 26 PART NO.ITV-138 DC (I) 34861 A MATERIAL MILD STEEL WIRE TO SPECN.IS: 280-1978. REAFFIRMED-2001 AMEND-I.1/4 HARD CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) STRIKER HOLDER FOR PYRO(INDIA) BUOYANT SMOKE ORGANGE[62]()
Specification : DRG NO ARDE 2222 DET 10 PT NO ITV 262 SPECN. NO. CQA (A) 2345 (C)
C
Nonestab
12) BAFFLE PLATE FOR 81MM ILLG. MK II[62]()
Specification : DRG NO. ARDE 1965, DET 15, PT NO. ITV 125, DC 37039A DT. 25/01/2006.
C
Nonestab
13) WASHER COPPER FOR 105 MM ILLG.[62]()
Specification : DRG.NO. D 6 P-A-180/1/3,PT NO.ISX 344
C
Nonestab
14) Pin Locking for 81mm Illg. MK-II[62]()
Specification : SPECN. NO. CQA(A) 2345 (C) DRG NO ARDE 1965 DET 26 PT NO ITV 115
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529
Description : 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529()
Specification : 6th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Steel Screw (Qty-2nos), TBRL/MMG-H/BO/01/R1 2.Adaptor Screw (Qty-2nos),TBRL/MMG--H/BO/05/R2 3.Quarter Pin, TBRL/MMG-H/BO/03/R0
C
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SWITCH NO 5 EMPT WO SNOUT SWITCH LF 9911357321
Description : SWITCH NO 5 EMPT WO SNOUT SWITCH LF 9911357321()
Specification : SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED
C
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) 3rd SET OF 4 ITEMS FOR MMHG 9911358526
Description : 3rd SET OF 4 ITEMS FOR MMHG 9911358526()
Specification : 3rd SET OF 4 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.'O'RING FOR MAIN HOUSING (QTY.-2NOS.) DRG.NO.TBRL/MMG-H/MK-1/042/R0 2. 'O'RING FOR MAGAZINE DRG.NO.TBRL/MMG-H/MK-1/043/R0 3. PULL RING DRG.NO.TBRL/MMG-H/MK-1/044/R0 4. SEALING BUS
C
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) WASHER I TO ARDE DRG NO 0901 00 00 00 00 001 00PB[00]()
4) COMPRESSOR ROTARY POWER DRIVEN 1A 220 m3 per Hr 9 point 8 kPa at 2300 rev per min to Drg No EGA 164 D Sheet I and II and other details as per Annexure A[00]()
Specification : COMPRESSOR, ROTARY POWER DRIVEN, 1A 220m3/Hr, 9.8 kPa at 2300 rev/min to CAT SECTION & CAT/PART No.63/4310-000002 and Drg.No.EGA-164/D (Sheet I & II) & other details as per Annexure Á”.
C
Estab
5) CONICAL SPRING TO OFAJ DRG NO FS 3081 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : CONICAL SPRING TO OFAJ DRG NO. FS-3081 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
6) COMBINED SAFETY SHAFT TO OFAJ DRG NO FS 3069 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : COMBINED SAFETY SHAFT TO OFAJ DRG NO. FS-3069 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
7) INERTIAL SAFETY SPRING TO OFAJ DRG NO FS 3078 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : INERTIAL SAFETY SPRING TO OFAJ DRG NO. FS-3078 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
8) PLATE NO 3 TO OFAJ DRG NO FS 3062 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : PLATE NO.3 TO OFAJ DRG NO. FS-3062 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
9) INERTIAL SAFETY TO OFAJ DRG NO FS 3068 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : INERTIAL SAFETY TO OFAJ DRG NO. FS-3068 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
10) PINION NO 1 TO OFAJ DRG NO FS 3065 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : PINION NO.1 TO OFAJ DRG NO. FS-3065 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
11) CENTRIFUGAL SAFETY UNIT DRG FS 3075 FOR FZ SYSTEM OF 84 MM SMOKE 469C ASSY SET CONSISTS OF TOP DRG FS 3055 1 NO CASING DRG FS 3086 1 NO LOCATING PIN TO BOFORS SPCN N4 37 2X6 DRG FS 3127 1 NO PRECUTEUR DRG FS 3079 1 NO SPRING DRG FS 3071 3 N[00]()
Specification : CENTRIFUGAL SAFETY UNIT DRG FS-3075 FOR FZ. SYSTEM OF 84 MM SMOKE-469C (ASSY SET CONSISTS OF TOP DRG. FS-3055-1 NO. CASING DRG. FS-3086-1 NO., LOCATING PIN TO BOFORS SPCN N4-37-2X6 DRG. FS-3127-1 NO. PRECUTEUR DRG FS-3079-1 NO. SPRING DRG
C
Estab
12) INERTIAL BOLT TO OFAJ DRG NO FS 3077 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : INERTIAL BOLT TO OFAJ DRG NO. FS-3077 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) COMBINED STEEL BALL TO OFAJ DRG NO FS 3082 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : COMBINED STEEL BALL TO OFAJ DRG NO. FS-3082 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
2) COMBINED SAFETY TO OFAJ DRG NO FS 3067 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : COMBINED SAFETY TO OFAJ DRG NO. FS-3067 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
3) PALLET TO OFAJ DRG NO FS 3063 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : PALLET TO OFAJ DRG NO FS 3063 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
4) STUD M 1 6 TO OFAJ DRG NO FS 3056 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : STUD M 1 6 TO OFAJ DRG NO FS 3056 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
5) CENTRIFUGAL BOLT TO OFAJ DRG NO FS 3057 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : CENTRIFUGAL BOLT TO OFAJ DRG NO. FS-3057 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
6) INTERMEDIATE WHEEL TO OFAJ DRG NO FS 3061 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : INTERMEDIATE WHEEL TO OFAJ DRG NO. FS-3061 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
7) WEIGHT TO OFAJ DRG NO FS 3070 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : WEIGHT TO OFAJ DRG NO. FS-3070 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
8) SHUTTER LOCKING PIN TO OFAJ DRG NO FS 3088 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : SHUTTER LOCKING PIN TO OFAJ DRG NO. FS-3088 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
9) MS 106 SLEEVE TO OFAJ DRG NO FS 3085 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : MS 106 SLEEVE TO OFAJ DRG NO. FS-3085 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
10) STEEL BALL TO OFAJ DRG NO FS 3073 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : STEEL BALL TO OFAJ DRG NO. FS-3073 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
11) TOOTHED SEGMENT WITH 12 TEETH MS 106 107 TO OFAJ DRG NO FS 3066 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : TOOTHED SEGMENT WITH 12 TEETH MS 106/107 TO OFAJ DRG NO. FS-3066 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
12) COMBINED FLEXION SPRING MS 106 107 TO OFAJ DRG NO FS 3058 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : COMBINED FLEXION SPRING MS 106/107 TO OFAJ DRG NO. FS-3058 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
13) PLATE NO 2 TO OFAJ DRG NO FS 3124 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : PLATE NO 2 TO OFAJ DRG NO FS 3124 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
14) COMBINED COMPRESSION SPRING TO OFAJ DRG NO FS 3074 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : COMBINED COMPRESSION SPRING TO OFAJ DRG NO FS 3074 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
15) O RING 33 X 2 TO OFAJ DRG NO FS 3126 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : O RING 33 X 2 TO OFAJ DRG NO FS 3126 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
16) CENTRIFUGAL SAFETY TO OFAJ DRG NO FS 3054 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : CENTRIFUGAL SAFETY TO OFAJ DRG NO FS 3054 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
17) SCREW M 1 6 X 2 TO OFAJ DRG NO FS 3080 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : SCREW M 1.6 X 2 TO OFAJ DRG NO. FS-3080 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
18) CENTRIFUGAL SAFETY SPRING MS 106 107 TO OFAJ DRG NO FS 3059 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : CENTRIFUGAL SAFETY SPRING MS 106/107 TO OFAJ DRG NO FS 3059 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
19) RIVET 1 POINT 2 X 5 POINT 32 POINT 126[00]()
Specification : RIVET 1.2 X 5.32.126, GOST 12641-80 (SEMI HOLLOW RIVET WITH A SEMI CIRCULAR HEAD HAVING 1.2MM DIAMETER AND 5MM LONG AS PER SPECN.GOST 12641-80 & DESIGNATION 1.2 X 5.32.126) INDIGENOUS EQUIVALENT MATERIAL CUZN37 IS 407-81 IS ALLOWED. (PLAT
C
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) ARMING PYRO DELAY EMPTY TO DRG LF 9911358385
Description : ARMING PYRO DELAY EMPTY TO DRG LF 9911358385()
Specification : ARMING PYRO DELAY EMPTY TO DRG.NO.Khs-2-2-0405(a)
Specification : SPECN ARDE/SPECN/415-(b) dt. 20.10.93 PARA 1 TO 20
C
Nonestab
5) SET OF 13 COMPONENTS FOR SUB ASSEMBLY FOR PYROJACK DRG NO. PTA-L-52-01-01-001-X[99]()
Specification : DRG NO. PTA-L-52-01-01-001-X DT. 08-05-2001 13 COMPONENTS AS PER LIST ENCLOSED
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) TIME and IMPACT FUZE FFV 447 EMPT ASY LF 9911351073
Description : TIME and IMPACT FUZE FFV 447 EMPT ASY LF 9911351073()
Specification : TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED.
R
Nonestab
2) FUZE A670 M ASSY EMPTY EX FD LP LF 9911353080
Description : FUZE A670 M ASSY EMPTY EX FD LP LF 9911353080()
Specification : NOSE FUZE GRADE A-670M ASSEMBLY (EMPTY) TO DRG NO.____3.140 -039____ DC(I)-34241-A DATE 24/9/87 PROGRAMME AND TEST PROCE-DURE AS PER ALBUM NO.D-2040, SHEET NO.____3.140.039____(12 SHEETS) DC-34241-A DTD 24/09/87.
R
Nonestab
3) EMPTY FUZE B 25M TO DRG TRD 1778 LF 9911357354
Description : EMPTY FUZE B 25M TO DRG TRD 1778 LF 9911357354()
Specification : EMPTY ASSY.FUZE B-25M TO DRG.NO TRD-1778a ( CONSISTING OF 37 ITEM ) REQD. FOR 140 MM ROCKET
1) PRIMER BODY WITH CONTACT MOULDED LF 9911356265
Description : PRIMER BODY WITH CONTACT MOULDED LF 9911356265()
Specification : BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS.
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SHELL HEI EMPTY 30MM BMP II LF 9911358129
Description : SHELL HEI EMPTY 30MM BMP II LF 9911358129()
Specification : BODY EMPTY WITH BAND ASSY TO DRG NO.bw5.500.009Cb/c 2 SHEETSSHEET-1 DC-37321-A DT 18-10-12 SHEET-2 DC- 34241-ADT.24/09/87 SPECN.PROGRAMME AND METHOD OF TESTING AS PERSHEET NO.5w5.500.112 M/C (5 SHEET) DC-34241-A DT.24-9-87.
Specification : CAP TO DRG.NO.9-0643/9- -104/1,DC.34183-A,DT-28.7.87.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) AFT CLOSURE INSULATOR (HEAT-551)[99]()
Specification : AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BALLISTIC CAP ASSY.5209 540 FOR 551[99]()
Specification : BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PARTITION TRD 1-2-2279 (84MM 551)[99]()
Specification : PARTITION TO DRG.NO. TRD 1-2-2279 FOR 84MM HEAT-551.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ADOPTER SCREW TO LF 9911358097[99]()
Specification : ADOPTER SCREW TO DRG.NO.MMG-H/MK-1/051/RO.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) ADEN LINK MK I FOR 30MM ADEN AMMN LF 9911358157
Description : ADEN LINK MK I FOR 30MM ADEN AMMN LF 9911358157()
Specification : LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL
R
Nonestab
2) PRIMER BODY WITH CONTACT MOULDED LF 9911356265
Description : PRIMER BODY WITH CONTACT MOULDED LF 9911356265()
Specification : BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS.
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CUP FOR KB 3B DETONATOR EMPTY[65]()
Specification : CUP FOR KB 3B DETONATOR_ EMPTY TO DRG NO. 3-076960/A3-KB-003/1 DC NO 37271 A DT.08.11.2010
C
Nonestab
2) CAP FOR KB 3B DETONATOR EMPTY TO DRG[65]()
Specification : CAP FOR KB 3B DETONATOR EMPTY TO DRG NO 3-076960/A3-KB-003/1, DC NO 37271-A DT08.11.10
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) LINER[62]()
Specification : DRG. No.5173961, DC No.36490-A,Dt.19.11.98 (IS:737-1974, GR.19000 IN "0" CONDITION
C
Nonestab
2) DISC TO DRG.NO.2-013535[62]()
Specification : DISC TO DRG.NO.2-013535/53-00-482M/14, DC NO.36785-A, DT.08.10.2001.
C
Nonestab
3) SQUIB EMPTY()
Specification : ERDA DRG.971,DET NO.05 DTD.10.10.88
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) AFT CLOSURE BLANK FOR HEAT 551 LF 9911357918[99]()
Specification : AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.
Specification : BANGALORE TORPEDO,SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC(I)-35128-A DT 4/7/91
C
Nonestab
3) Closing Cup Part No 6413187 For 84 mm smoke 469C LF 9911358443[99]()
Specification : OEM DRG No 301177898 / TRD DRG No 2 2 2738
C
Nonestab
4) BLANK FOR PLUNGER FOR 751 LF 9911358749[99]()
Specification : BLANK FOR PLUNGER FOR 751 TO SPEC NO. 00814596 MATERIAL EN-AW 7075 TO DRG NO. 304101470 TO PART NO 06417888
C
Nonestab
5) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528[99]()
Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/
C
Nonestab
6) 2nd SET OF 3 PLASTIC ITEMS FOR MMHG LF 9911358525[99]()
Specification : 2ND SET OF 3 PLASTIC ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.BLAST CUP DRG.NO TBRL/MMG-H/MK-1/036/R0 2.PLUG RETAINING DRG.NO TBRL/MMG-H/MK-1/041/R0 3.FRAGMENTING SLEEVE DRG.NO TBRL/MMG-H/MK-1/038/R0
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SUPPORTRING RING PART NO 5211870 LF 9911358417[99]()
Specification : SUPPORTING RING PART NO. 5211870 TO OEM DRG.NO.304094939/ TRD.DRG.NO 2.2.2371
R
Nonestab
2) SHUTTER PLATE TBRL LF NO 9911358300[99]()
Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0
C
Nonestab
3) HOUSING WITH PIN FINISHED FOR DET L F 9911358156[99]()
Specification : HOUSING WITH PIN DRG.PT NO.IQX-85 SA.DC 36709 A, DATE.08-09-2000.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CAP TO DRG NO ARM 1172 A26 6221020012[62]()
Specification : CAP TO DRG. NO.ARM 1172 A26DT.24-11-79 6221020012
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CAPSULE TO DRG 6281000120[62]()
Specification : CAPSULE TO DRG.NO-6387453,DC.NO- 36490-A,DT.19.11.98
C
Nonestab
2) CUP Y1 3[64]()
Specification : 6410120650 CUP Y1-3 -[IGNITING PRIMER MG-8] TO DESIGNER REF NO. CQA (A)/AMN/2855.DC NO.37271-A DT.08.11.10 SCANNED DT. 05.01.2011 HEIGHT SHOULD BE FROM 1.30MM TO 1.40MM OUTSIDE DIAMETER SHOULD BE 2.35MM TO 2.38MM. NOTE: - EDGES SHOULD
C
Nonestab
3) CAP K3 2[64]()
Specification : 6410120620 CAP K3-2 [IGNITING PRIMER MG-8] TO DESIGNER REF. NO. CQA(A)/AMN/2854.DC NO.37271-A, DT.08.11.10 SCANNED ON DT.05.01.11. HEIGHT SHOULD BE FROM 3.05 MM TO 3.15 MM. NOTE:- EDGES SHOULD BE VERY SMOOTH, EQUAL HEIGHTED, NO CROWN & SH
Specification : ARDE/SPECN/415 (b) dt. 20.10.93 PARA 1 TO 20.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1High Explosive Factory
Name
Specification
Use
Status
1) RETAINING PIN & RING[10]()
Specification : DES REF NO.CIA/AMN/1799 DET NO.6 PT NO. ITW 10 SA DC 35817-A SPECN:CQA(A) 1504(E) DC 35870-A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARTG CASE FOR 23MM SCHILKA HEI/T[99]()
Specification : CARTG CASE EMPTY TO DRG NO.6018-10-00-01 (7 SHEET)SHEET NO.1DC-36909-A DT.5-7-03 AND SHEET NO.2 DC NO.33817-A DT.10-9-85SHEET NO.3 DC NO.37073-A DT.29-9-06 AND SHEET NO.4 T0 SHEETNO.6 DC NO.33817-A DT.10-9-85 AND SHEET NO.7 DC NO.35587-AD
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) RIVET 1 85 PART NO 404029603 LF9911358411
Description : RIVET 1 85 PART NO 404029603 LF9911358411()
Specification : RIVET 1.85 PART NO.404029603
R
Nonestab
2) VALVE PART NO 404038806 LF 9911358407
Description : VALVE PART NO 404038806 LF 9911358407()
Specification : VALVE PART NO. 404038806 TO OEM DRG.NO.304074199 TRD.DRG.NO.3.2.2547
R
Nonestab
3) SCREW RIVET 0 X 3 PART NO 6414437 LF 9911358423
Description : SCREW RIVET 0 X 3 PART NO 6414437 LF 9911358423()
Specification : SCREW RIVET 0 X 3 PART NO.6414437
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PRIMER BODY WITH CONTACT MOULDED LF 9911356265[99]()
Specification : BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) 84MM CARTRIDGE CASE 502 LF 9911358483[99]()
Specification : 84MM CARTRIDGE CASE 502 PART NO. 4106869
C
Nonestab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) CARTG CLIP FOR 76 62 SRGM LF 9911357314
Description : CARTG CLIP FOR 76 62 SRGM LF 9911357314()
Specification : CARTG. CLIP ASSY TO DRG.NO. TRD-2-1-1992.
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARTG EOFE 3 PIN NO.1 MK3 DET-1[99]()
Specification : 3-PIN NO-1 MK-3 CARTG. ELECTRIC OPERATING FIRE EXTINGUSHER (EMPTY ASSEMBLY) TO DRG NO.TRD-3-2-1877 AND SPECN.NO.ARDE/SPECN/264.
C
Nonestab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARTG EOFE 2 PIN NO.1 MK-3[99]()
Specification : CARTG.ELECTRIC OPERATING FIRE EXTENGUISHER 2PIN NO.1MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-1-2135.AND SPECN.NO. ARDE/SPCEN/124.FOR AIR FORCE WITH ECCENTIRICITY 0.55MM (INCLUSIVE EMPTY & FILLED PROOF).
C
Nonestab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Tail Unit assy 5216051 for HEAT 551 LF 9911357820
Description : Tail Unit assy 5216051 for HEAT 551 LF 9911357820()
Specification : Tail Cromated to Drg no. 301075242
Specification : CARTG. ELECTRIC OPERATING FIRE EXTINGUISHER 3 PIN NO.3 MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-2-1881 AND SPECN.NO. ARDE/SPECN/290.
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ASSY OF S&A(EMPTY) COMPONENTS PFFC[99]()
Specification : ASSEMBLY OF S&A (EMPTY) COMPONENTS,CONSISTING OF FOLLOWING COMPONENTS AS PER ATTACHED LIST.NOTE- QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL.ATTACHED.ENCL.-2
C
Nonestab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817
Description : PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817()
Specification : 81 MM PRIMER BODY TO DRG NO. IQX 861DC NO 36304-A DT. 03/07/97, SPECIFICATION OF MATERIAL, PROTECTIVE FINISH AND OTHER GENERAL REQUIREMENT TO THE
COMPONENT AS PER SPECIFICATION MENTIONED IN DRG NO. IQX861DC NO 36304-A DT. 03/07/97 & 04/
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527
Description : 4th SET OF 3 ITEMS FOR MMHG L F 9911358527()
Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.
1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/
MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) 6099999131 SET OF COMPONENTS FOR 30MM VOG 17M[60]()
Specification : 6099999131 SET OF COMPONENTS FOR 30MM VOG-17M
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527
Description : 4th SET OF 3 ITEMS FOR MMHG L F 9911358527()
Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.
1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/
MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) LOCKING NUT TO CQA A DRG N O 3 016919 DET 55DC 37284 A DT 06 7 2011[00]()
Specification : LOCKING NUT TO CQA(A)DRG.N O. 3-016919 DET-55DC-37284-A DT.06.7.2011
C
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SET OF CARRIER 4A/L & CARRIER 5A/L[99]()
Specification : SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SET OF 3 SECONDAY COMPT IS-412,413,[99]()
Specification : SECONDARY COMBUSTIBLE CARTG CASE SET OF 3 COMPONENTS:-1)COM-BUSTIBLE SLEEVE FOR FRONT CARTG TO DRG PT NO ISX-412, DC NO-36698-A DT 14/8/2K (2)COMBUSTIBLE CAP FOR FRONT CARTG TO DRGPT.NO.ISX-413 DC 36698-A DT 14/8/2K (3)COMBUSTIBLE BODY FO
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PLUNGER BLANK FOR 84 HEAT 551 LF 9911357919[99]()
Specification : PLUNGER BLANK TO DRG NO.6417 888/DRG.NO.TRD-1-2-2293.
C
Nonestab
2) SHELL BODY BLANK TO OFK DRG 839L LF 6170444600[61]()
Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) 6381210301 SET OF COMPONENTS FOR PRIMER M191A2[63]()
Specification : SET OF COMPONENTS FOR PRIMER M191 A2 CONSISTING OF PLUNGER, PLUNGER GUIDE, WASHER SEALING, IGNITION ELEMENT AND INNER CASE AS PER ATTACHED ANNEXURE "A"
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOOSTER CUP & PIN FOR 84MM HEAT-551 (9911358084)[99]()
Specification : SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).
C
Estab
2) SUPPORTING RING TO DRG.NO.TRD222272 (9911357861)[99]()
Specification : SUPPORTING RING TO DRG.NO.TRD-2-2-2272.
1) 6099999131 SET OF COMPONENTS FOR 30MM MIL 17HE[60]()
Specification : SET OF COMP. CONSISTING OF GRENADE BODY WITH DRIVING BAND (AFK/DEV-07), RETAINER (AFK/DEV-09), TRANSIT PLUG (AFK/DEV-11), TRANSIT RING (AFK/DEV-08), NOTCHED CLOSE COIL (AFK/DEV-12), CARTG. CASE (AFK/DEV-06)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Grey Iron Foundry
[ENR Registration]
Name
Specification
Use
Status
1) Machining & Leake Proof Test of Hand Grenads Empty Bodies.
Description : Machining & Leake Proof Test of Hand Grenads Empty Bodies.()
Specification : Drg. No.ITW-63
C
Estab
Category : p
Grade : 3
Size :
S
1Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) 1.BIPOD ASSY. To DS CAT NO. 1005-557897
Description : 1.BIPOD ASSY. To DS CAT NO. 1005-557897()
Specification : AS PER DRG.
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) PRIMER ELECTRIC 1A/L/EMPTY
Description : PRIMER ELECTRIC 1A/L/EMPTY()
Specification : CQA(A) DRG. PART NO. IQX 46GE, DC NO. 36662-A, DT. 23.03.2000.
C
Estab
Category : p
Grade : 3
Size :
S
1Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Bayonet 1-A for Rifle 5.56 MM Weapon Drg. No. ARDE SK-2915
Description : Bayonet 1-A for Rifle 5.56 MM Weapon Drg. No. ARDE SK-2915()
Specification : AS PER DRG.
C
Estab
2) SCABBARD BAYONET FOR CARBINE 9MM
Description : SCABBARD BAYONET FOR CARBINE 9MM()
3) EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.
Description : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.()
Specification : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.
C
Estab
4) BAYONET 1A FOR RIFLE
Description : BAYONET 1A FOR RIFLE()
Specification : AS PER DRAWING
C
Estab
5) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE
Description : TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE()
Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided
C
Estab
6) 1.BIPOD ASSY. To DS CAT NO. 1005-557897
Description : 1.BIPOD ASSY. To DS CAT NO. 1005-557897()
Specification : AS PER DRG.
C
Estab
Category : p
Grade : 3
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) PIN LEVER CHANGE FOR CARBINE 5 56MM IN FINISHED CONDITION[70]()
Specification : PIN LEVER CHANGE TO DRG NO.AKC-10/5 FOR CARBINE 5.56MM IN FINISHED CONDITION
C
Nonestab
2) PIN COCKING HANDLE IN FINISHED CONDITION TO DS CAT NO 5315 009175[70]()
Specification : PIN COCKING HANDLE IN FINISHED CONDITION TO DS CAT NO.5315-009175.DC(I) NO.26927-SA DT.02.09.16
C
Nonestab
3) PAWL HAMMER FOR RIFLE 5 56[70]()
Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition
C
Nonestab
4) Pin Grooved Headed for Hammer DS CAT NO 5315 009190[70]()
Specification : Pin Grooved Headed for Hammer DS CAT NO 5315 009190
C
Nonestab
5) MULTI TOOTH LOCK WASHER[70]()
Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED.
C
Nonestab
6) Picatiny Rail FOR CARBINE 5 56MM IN FINISHED CONDITION[70]()
Specification : PICATINY RAIL TO DRG NO. AKC-08/1/2* FOR CARBINE 5.56MM IN FINISHED CONDITION.
C
Nonestab
7) Pin grooved Headed for Hinge cover for Carbine 5 56[70]()
Specification : PIN GROOVED HEADED FOR HINGE COVER TO DRG. NO.ARDE/SK- 3143/29.DS CAT NO.5315-009188 DC(I) NO.26927-SA DT.02.09.16
C
Nonestab
8) PIN GROOVED HEADED FOR TRIGGER AND SAFETY SEAR FOR CARBINE 5 56[70]()
Specification : MACHINING OF CASING UPPER AS PER DRG. NO.IRDE 1810/2 / MCT-2390/1 FOR COMMANDER DAY EPISCOPE. NOTE:SHATTER ALLOY CASTING AS PER DRG.NO ODD/C/826/2 WILL BE SUPPLIED BY OFD.
C
Nonestab
82) CAP LID TO DRG NO MCT 3251 FOR CLINOMETER 2A 46[00]()
Specification : CAP(LID) TO DRG.NO.MCT-3251 FOR CLINOMETER 2A 46
C
Nonestab
83) SCREW SPECIAL DRG NO MCT 1137 1[74]()
Specification : SCREW SPECIAL DRG.NO.MCT-1137/1
C
Nonestab
84) SCREW BA ROUND HEAD[74]()
Specification : SCREW BA ROUND HEAD 8X5/16" BRASS
C
Nonestab
85) SCREW GRUB SLOTTED CONICAL POINT[74]()
Specification : SCREW GRUB SLOTTED CONICAL POINT, M2.2 X 2.5, STEEL 6.6
C
Nonestab
86) SUPPORT DOVE PRISM ASSEMBLY TO DRG NO IRDE 1175 17[74]()
Specification : SUPPORT,DOVE PRISM ASSEMBLY TO DRG.NO.IRDE-1175/17
Specification : HOLDER DRG.IRDE-1175/45 SHT.2 FOR SIGHT DIAL 104A W.O.42045.
C
Nonestab
120) RING RETAINING TO DRG NO MCT 3238 1 FOR SIGHT DIAL 104A[74]()
Specification : RING RETAINING TO DRG.NO.MCT-3238/1 FOR SIGHT DIAL 104A
C
Nonestab
121) SUPPORT DIAL SCALE TO DRG NO MCT 3243 FOR SIGHT DIAL 104A[74]()
Specification : SUPPORT DIAL SCALE TO DRG.NO.MCT-3243 FOR SIGHT DIAL 104A
C
Nonestab
122) KNOB TO DRG NO MCT 3245 FOR SIGHT DIAL 104A[74]()
Specification : KNOB TO DRG.NO.MCT-3245 FOR SIGHT DIAL 104A
C
Nonestab
123) RETAINER TO DRG NO MCT 3240 1 FOR SIGHT DIAL 104A[74]()
Specification : RETAINER TO DRG.NO.MCT-3240/1 FOR SIGHT DIAL 104A
C
Nonestab
124) SPACER OPTICAL ELEMENT TO DRG NO MCT 3241 FOR SIGHT DIAL 104A[74]()
Specification : SPACER OPTICAL ELEMENT TO DRG.NO.MCT-3241 FOR SIGHT DIAL 104A
C
Nonestab
125) BEARING DRUM TO DRG NO MCT 2901[74]()
Specification : BEARING DRUM, TO DRG.NO.-MCT-2901 MCT-2901
C
Nonestab
126) CELL OPTICAL ELEMENT AS PER DRG NO MCT 3269 1 FOR SIGHT DIAL 104A[74]()
Specification : CELL OPTICAL ELEMENT AS PER DRG.NO. MCT-3269/1 FOR SIGHT DIAL 104A
C
Nonestab
127) SPACER RING AS PER DRG NO MCT 3270 FOR SIGHT DIAL 104A[71]()
Specification : SPACER RING AS PER DRG.NO. MCT-3270 FOR SIGHT DIAL 104A
C
Nonestab
128) SCALE FIXED WITHOUT ENGRAVING AS PER DRG NO MCT 3266 1 FOR SIGHT UNIT CASED 102B[74]()
Specification : SCALE FIXED (WITHOUT ENGRAVING) AS PER DRG.NO.MCT-3266/1 FOR SIGHT UNIT CASED 102B.
C
Nonestab
129) SCREW TAPPING THREAD CUTTING TO DRG NO MCT 1144 2 FOR SIGHT UNIT CASED 102B[74]()
Specification : SCREW,TAPPING,THREAD, CUTTING TO DRG.NO.MCT-1144/2 FOR SIGHT UNIT CASED 102B.
C
Nonestab
130) WING NUT CLAMP TO DRG NO MCT 1131 2 FOR SIGHT UNIT CASED 102B[74]()
Specification : WING NUT,CLAMP TO DRG.NO.MCT-1131/2 FOR SIGHT UNIT CASED 102B.
C
Nonestab
131) CLAMP SCREW ADJUSTABLE DRG NO IRDE 1166 4 FOR COLLIMETER INFINITY[74]()
Specification : CLAMP SCREW ADJUSTABLE DRG.NO.IRDE-1166/4 FOR COLLIMETER INFINITY
C
Nonestab
132) CELL AS PER DRG NO MCT 3279[74]()
Specification : CELL AS PER DRG.NO.MCT-3279
C
Nonestab
133) BEARING AS PER DRG NO MCT 3281 FOR COLLIMETER INFINITY 102 A[74]()
Specification : BEARING AS PER DRG.NO.MCT-3281 FOR COLLIMETER INFINITY 102 A
C
Nonestab
134) BRACKET AS PER DRG NO MCT 3282[74]()
Specification : BRACKET AS PER DRG.NO.MCT-3282
C
Nonestab
135) CASE VIAL LEVEL AS PER DRG NO MCT 3284[74]()
Specification : CASE VIAL LEVEL AS PER DRG.NO.MCT-3284
C
Nonestab
136) BUSHING BLANK MCT 1113 2[74]()
Specification : BUSHING BLANK,MCT-1113/2
C
Nonestab
137) TUBE LEVEL INDICATOR AS PER DRG NO MCT 3250 SHEET NO2[74]()
Specification : TUBE LEVEL INDICATOR AS PER DRG.NO.:MCT-3250(SHEET.NO.2)
C
Nonestab
138) GUIDE SPRING TO DRG NO CQA I 793 11[00]()
Specification : GUIDE SPRING TO DRG NO.CQA(I)-793/11
C
Nonestab
139) INSULATOR II DRG NO MCT 1305 2[00]()
Specification : INSULATOR II DRG. NO. MCT-1305/2
C
Nonestab
140) KNOB TO DRG NO MCT 3096 FOR MT TLESCOPE 102A[74]()
Specification : KNOB TO DRG.NO. MCT-3096.FOR MT.TLESCOPE 102A
C
Nonestab
141) LEAF SPRING TO DRG NO MCT 2424[00]()
Specification : LEAF SPRING TO DRG. NO. MCT-2424
C
Nonestab
142) SLIDE TO DRG NO CQA I 792 34[74]()
Specification : SLIDE TO DRG NO. CQA(I)-792/34
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Metal and Steel Factory
Name
Specification
Use
Status
1) MANUFACTURE OF NOSE ADAPTER TO DRG.REGD NO.17244/1 PART NO TV 44 FROM STEEL ROUND OF 50 MM(+3MM) WITHOUT SURFACE TREATMENT. AS PER SCOPE OF WORK ATTACHED.[94]()
Specification : MANUFACTURE OF NOSE ADAPTER TO DRG.REGD NO.17244/1 PART NO TV 44 FROM STEEL ROUND OF 50 MM(+3MM) WITHOUT SURFACE TREATMENT. AS PER SCOPE OF WORK ATTACHED.
E
Estab
Category : p
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) CASE CARTG OF 25 PR MK 2/1/L BRASS TO DRG NO DD(L) 6557 E PART NO. RW-32[60]()
Specification : DRG NO DD(L) 6557 E PART NO. RW-32
Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP
C
Nonestab
15) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 SPECN. DGOF 135[60]()
Specification : DGOF 135 (A)DT. 15-11-99.
C
Nonestab
16) CASING AS PER DRG.NO.NAI(V)7001/1[60]()
Specification : DRG NO:NAI(V) 7001/1 23/07/04.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) DET PLUG FOR A C BOMB 52 MK6[64]()
Specification : DTD&P (AIR)/5/62/ARM
C
Nonestab
2) HEAD FOR A/C BOMB 52 MK6 ARM 1109-A4[64]()
Specification : DTD&P(AIR)/5/62/ARM
C
Nonestab
3) COMPONENT FOR EXPLOSIVE BOLT 5 ITEM[60]()
Specification : SPECN:ADE/PTA/PYR ]]SPEC-03
C
Nonestab
4) DETONATOR PLUG FOR BOMB NO.56 MK2[64]()
Specification : SPECN: AIR 1296 A
C
Nonestab
5) HEAD FOR DET A/C BOMB 56 MK2[64]()
Specification : DRG. NO. ARM 1138 A3 DT.19-3-96
R
Nonestab
6) DET PLUG FOR BOMB NO.28 MK3 EMPTY[64]()
Specification : SPECN. AIR 304-L
C
Nonestab
7) HEAD FOR BOMB 28 MK3 EMPTY[64]()
Specification : SPECN: AIR 304-L
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) BASE PLUG DES REF NO CIA/AMN/1799 DET NO.4, PT NO. ITW 66 SPECN: CQA(A) 1504[61]()
Specification : CQA(A) 1504
C
Nonestab
2) HOUSING DELAY SHT 2 SPECN CIA-1804[61]()
Specification : CQA(A)1804
C
Nonestab
3) SET SCREW SLOTTED HD NO 2 BA[17]()
Specification : DESIGN REF CIA/AMN/885
C
Nonestab
4) WRENCH FUZING MINE APM 16 A1[42]()
Specification : CQA(A)1804
C
Nonestab
5) CAP WITH HOLDER FFV-840 DRG. NO. F-1334-230761-C[60]()
Specification : Housing to Casting Drg No. D-5178463(Rev-A)
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Arm to Investment Casting Drg No. D-4082394()
Specification : Arm to Investment Casting Drg No. D-4082394(Rev-A)
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Arm to Drg No. D-6358150()
Specification : Arm to Drg No. D-6358150(Rev-A)
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Arm to casting drg no. D-4082416()
Specification : Arm to casting drg no. D-4082416
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Flap Right to investment casting to Drg. No. D-5179089()
Specification : As per Drg. No. D-5179089
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Arm to Casting()
Specification : As per Drg. No. D-4082388(Rev-A)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Holder to Investment Casting()
Specification : As per Drg . No. D-4082393/1(Rev-A)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Flap Left investment casting Drg No. D-5179088()
Specification : Flap Left investment casting Drg No. D-5179088
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Cover Left to Investment Casting Drg No. D-5179086()
Specification : Cover Left to Investment Casting Drg No. D-5179086
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Guide Casting and Machining as per drawing No SK 6501 TE[70]()
Specification : Guide- Casting and Machining as per drawing No. SK- 6501 /TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007[70]()
Specification : IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC PISTOL GRIP BASE AS PER DRG NO K-IC-1106[70]()
Specification : AS PER DRG NO K-IC-1106
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC CROSS BOLT HOOK LATCH AS PER DRG NO: K-IC-4004[70]()
Specification : AS PER DRG NO: K-IC-4004
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG.NO.62C 6023 250 E3 CATCH FRICTION COVER FEED (A 6023) FOR 12.7 MM AD GUN.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.NO.62C 6023 250 E3 CATCH FRICTION COVER FEED (A 6023)
FOR 12.7 MM AD GUN.
"
C
Nonestab
2) INVESTMENT CASTING TO DRG.No.: 62C 6019 250 F3 FOR BRACKET HOLDING FRONT COVER.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 6019 250 F3 FOR BRACKET HOLDING FRONT COVER.
"
C
Nonestab
3) INVESTMENT CASTING TO DRG.NO.62C 6025 250 F3. HANDLE CATCH FRICTION (A 6025)[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.NO.62C 6025 250 F3. HANDLE CATCH FRICTION (A 6025)
"
C
Nonestab
4) INVESTMENT CASTING TO DRG.No.: 62C 1012 250 E3. FOR FLASH HIDER[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1012 250 E3. FOR FLASH HIDER
"
C
Nonestab
5) INVESTMENT CASTING TO DRG.No.: 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT
"
C
Nonestab
6) INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN. A 1013[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN.
A 1013
"
C
Nonestab
7) INVESTMENT CASTING TO DRG.No.: 62C 7101 250 J3. FOR BODY TRIGGER MECHANISM (A7101) OF 12.7mm A.D. GUN.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 7101 250 J3. FOR BODY TRIGGER MECHANISM (A7101) OF 12.7mm A.D. GUN.
"
C
Nonestab
8) INVESTMENT CASTING TO DRG.No.: 62C 2463 250 G3. FOR HOUSING EJECTOR.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 2463 250 G3.
FOR HOUSING EJECTOR."
C
Nonestab
9) BRACKET CATCH REAR COVER FOR 12.7 MM A/D GUN (A6020) INV.CAS TING TO DRG.NO.62C 6020 250 E3[70]()
Specification : AS PER DRG OF "BRACKET CATCH REAR COVER FOR 12.7 MM A/D GUN (A6020) INV.CAS TING TO DRG.NO.62C 6020 250 E3
"
C
Nonestab
10) DETENT HANDLE BASE BARREL FOR 12.7 MM A/D GUN (A1216) INV.CA STING TO DRG.NO.62C 1216 250 D3[70]()
Specification : AS PER DRG OF "DETENT HANDLE BASE BARREL FOR 12.7 MM A/D GUN (A1216) INV.CA STING TO DRG.NO.62C 1216 250 D3
"
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) DOVETAIL FEMALE AS PER DRG. NO.CWC-231/2/1[74]()
Specification : DOVETAIL FEMALE AS PER
DRG. NO.CWC-231/2/1
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) HINGE TO 3806102369[38]()
Specification : 175.02.352-2/C
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC RETAINER AS PER DRG NO: K-IC-2091. (LF.No.7024020910)[70]()
Specification : AS PER DRG NO: K-IC-2091. (LF.No.7024020910)
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Body Finished Through IC Machining route for Revolver Side Swing[70]()
Specification : Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Estab
2) NUT AS PER DRAWING NO SK 6513 TE[70]()
Specification : NUT AS PER DRAWING NO SK 6513 TE
C
Estab
3) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Estab
4) RETAINER AS PER DRAWING NO SK 6521 TE[70]()
Specification : RETAINER AS PER DRAWING NO SK 6521 TE
C
Estab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING FOR BLOCK TOP TO DRG. NO.SK-3868*.[70]()
Specification : As per DRG.
C
Nonestab
2) INVESTMENT CASTING FOR LEVER LOCKING TO DRG. NO.SK-3715*[70]()
Specification : As per Drg.
C
Nonestab
3) I.C. of Cocking Bracket for JVPC DRG. No. SK JVPC-598[70]()
Specification : AS PER DRG.
C
Nonestab
Category : DP
Grade : I
Size :
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) NOZZLE TO LF 3801087025[38]()
Specification : GOST 977 - 88
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) HOUSING TO LF 3806209016[38]()
Specification : GOST 977 - 88
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) BRACKET RH TO LF 3801063041[38]()
Specification : GOST 977 - 88
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PAWL TO DRG NO C1024 WITH FIRMS MATERIAL IN FULLY FINISHED AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
2) CONNECTING LINK RIGID TO DRG NO C5028 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
3) CONNECTING LINK RIGID TO DRG NO 5112 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) CASTING & MACHINING ( Heavy duty )
Description : CASTING & MACHINING ( Heavy duty )()
Specification : AS PER DRG./SPECN.
C
Estab
2) Investment Castings of high alloy Stainless Steel, Nickel & Cobalt based Alloys, Carbon Steel & Low
Description : Investment Castings of high alloy Stainless Steel, Nickel & Cobalt based Alloys, Carbon Steel & Low()
Specification : As per the Requirements of GCF drawing & Specifications. ..
C
Estab
Category : p
Grade : 3
Size :
O
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) SEMI FINISHED BLANK (THROUGH I.C ROUTE) OF BODY TORFI SK 10141 FOR PISTOL AUTO 9 MM 1A.[70]()
Specification : SEMI FINISHED BLANK (THROUGH I.C ROUTE) OF BODY TORFI SK 10141 FOR PISTOL AUTO 9 MM 1A.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) INVESTMENT CASTING OF TRIGGER ( RFI SK 9100)FOR 12 BORE PAG[70]()
Specification : INVESTMENT CASTING OF TRIGGER ( RFI SK 9100)FOR 12 BORE PAG
C
Estab
2) INVESTMENT CASTING OF TRIGGER LOCKING BRACKET(RFI SK NO - 9102) FOR 12 BORE PAG.[70]()
Specification : INVESTMENT CASTING OF TRIGGER LOCKING BRACKET(RFI SK NO - 9102) FOR 12 BORE PAG.
C
Estab
3) INVESTMENT CASTING OF CONNECTOR BUTT EXR OF RIFLE 5.56MM EXCALIBUR MK.1[70]()
Specification : BS
C
Estab
4) INVESTMENT CASTING OF BODY FOR 12 BORE PAG.[70]()
Specification : MAT. BS: 3146 PART I 1974 CLASS 5 GRADE 'A'
C
Estab
5) INVESTMENT CASTING OF RECEIVER FOR 0.32 PISTOL [70]()
Specification : bs
C
Nonestab
6) INVESTMENT CASTING FOR HINGE COVER. FOR RLFLE 5.56MM INSAS.[70]()
Specification : bs
C
Estab
7) INVESTMENT CASTING OF RETAINER SPRING RECOIL(MODIFIED) FOR RIFLE 5.56 MM INSAS.[70]()
Specification : bs
C
Estab
8) INVESTMENT CASTING FOR SLIDE(RETRACTING) FOR RIFLE 5.56MM INSAS.[70]()
Specification : bs
C
Estab
9) INVESTMENT CASTING OF BRACKET(WITH HEAT TREATMENT) FOR RIFLE 5.56MM.INSAS.[70]()
Specification : bs
C
Estab
10) INVESTMENT CASTING OF HOUSING SIGHT REAR FOR RIFLE 5.56MM INSAS.[70]()
Specification : INVESTMENT CASTING OF HOUSING SIGHT REAR TO RFI SK. NO. 6093*6. (LATEST DC. NIL DT.30/6/03) FOR RIFLE 5.56MM INSAS.
C
Estab
11) INVESTMENT CASTING OF BODY FOR PISTOL AUTO 9MM 1A.[70]()
Specification : INVESTMENT CASTING OF BODY TO RFI SK NO. 6830/C*5 FOR PISTOL AUTO 9MM 1A.
C
Estab
12) INVESTMENT CASTING FOR CATCH SAFETY FOR PISTOL AUTO 9MM 1A.[70]()
Specification : INVESTMENT CASTING FOR CATCH SAFETY TO RFI. SK.. NO. 3571*3 FOR PISTOL AUTO 9MM 1A.
C
Estab
13) INVESTMENT CASTING OF LEVER CHANGE FOR RIFLE 5.56MM INSAS.[70]()
Specification : INVESTMENT CASTING OF LEVER CHANGE TO RFI SK-4686*9 (LATEST DC. NIL DT.30/6/03) FOR RIFLE 5.56MM INSAS.
C
Estab
Category : p
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) LEVER,TRIPPING FOR PISTOL AUTO 9MM 1A [70]()
Specification : LEVER,TRIPPING TO DS CAT NO. 5340-016094 ( LT.DC- 26827 SADT.10-5-2016).MACRO ETCH TEST TO ASTME 381-84 WILL BE AS PERCOL.(C) OF SL. NO.1 OF CQA(SA) NOTE SHEET NO.1.NMIR TEST TO IS:4163-82 WILL BE AS PER COL.(C) OF SL. NO.3OF CQA(SA) NOTE
C
Estab
Category : p
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) FOUR TYPES OF CASTING[02]
1(a) Sand Castings/172 TY-4,GOST 977-88
1(b) Any type of Steel Castings/172 TY-5, GOST B-19184-73
2.Investment Castings/172 TY-10, GOST 977-88
3.Non Ferrous Castings/172 TY-6,GOST 1583-83, GOST 2685-75
4.Grey Iron Casting/ 172 TY-7, GOST 1412-85.()
Specification : STEEL, SPECIAL STEEL, ALUMINIUM ALLOY. GREY CAST IRON & INVESTMENT CASTINGS
R
Nonestab
Category : p
Grade : Grade I
Size :
S
1Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG NO. SKM-755*4. FOR CATCH CARRYING HANDLE
Description : INVESTMENT CASTING TO DRG NO. SKM-755*4. FOR CATCH CARRYING HANDLE()
Specification : AS PER DRG.
C
Estab
2) INVESTMENT CASTING OF LEVER CHANGE TO DRG. NO. SK-3706/9*2
Description : INVESTMENT CASTING OF LEVER CHANGE TO DRG. NO. SK-3706/9*2()
Specification : AS PER DRG.
C
Estab
3) INVESTMENT CASTING TO DRG NO SKM 753 3 FOR REAR SIGHT RAMP
Description : INVESTMENT CASTING TO DRG NO SKM 753 3 FOR REAR SIGHT RAMP()
Specification : INVESTMENT CASTING TO DRG NO.SKM-753*3 FOR REAR SIGHT RAMP.
C
Estab
4) IC BODY COCKING for MAG
Description : IC BODY COCKING for MAG()
Specification : I.C BODY COCKING SLIDE SKM-738*4
C
Estab
5) INVESTMENT CASTING DOVETAIL TO DRG. NO. SK-3706/35.
Description : INVESTMENT CASTING DOVETAIL TO DRG. NO. SK-3706/35.()
Specification : AS PER DRG.
C
Estab
6) IC OF BRACKET CARRYING HANDLE DRG No. 752*2
Description : IC OF BRACKET CARRYING HANDLE DRG No. 752*2()
Specification : AS PER DRG.SKM-752*2
C
Estab
7) IC SKM 754 2 FOR KNOB GAS REGULATOR SCREW
Description : IC SKM 754 2 FOR KNOB GAS REGULATOR SCREW()
Specification : I.C.SKM-754*2 FOR KNOB GAS REGULATOR SCREW
C
Estab
Category : p
Grade : 1
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) C5089 CATCH BODY FULLY FINISHED THROUGH IC DRG 64C 5089 250 H3 ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()
Specification : As per TE
C
Nonestab
2) C5014 CARRIER FULLY FINISHED THROUGH IC DRG 64C 5014 250 I3 ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()
Specification : As per TE
C
Nonestab
3) MANUFACTURING AND SUPPLY OF HOLDER IN FULLY FINISHED CONDITION TO DRG NO C2026 DS CAT NO 1005 5650452 THROUGH CASTING ROUTE WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) BODY IC of REVOLVER MK III DRG NO SK 5375R3
Description : BODY IC of REVOLVER MK III DRG NO SK 5375R3()
Specification : BODY(IC) OF REVOLVER MK-III DRG NO SK-5375R*3 D.A. NO. 35/08 , DT. 12-05-08
C
Estab
2) INVESTMENT CASTING OF TRIGEER SK-5378R REQUIRED FOR REVOLVER MK-III D.A. NO. 24/09, DT. 16.07.09
Description : INVESTMENT CASTING OF TRIGEER SK-5378R REQUIRED FOR REVOLVER MK-III D.A. NO. 24/09, DT. 16.07.09()
Specification : AS PER DRG.
C
Estab
3) HAMMER IC FOR REVOLVER MK III
Description : HAMMER IC FOR REVOLVER MK III()
Specification : HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1,
C
Estab
4) PLATE BODY IC OF REV MK III
Description : PLATE BODY IC OF REV MK III()
Specification : PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1
C
Estab
5) INVESTMENT CASTING FOR CAM CYLINDER TO DRG. NO. SK-3411*1 D.A. NO. 10/10 DT. 11-5-10
Description : INVESTMENT CASTING FOR CAM CYLINDER TO DRG. NO. SK-3411*1 D.A. NO. 10/10 DT. 11-5-10()
Specification : AS PER DRG.
C
Estab
Category : p
Grade : 1
Size :
S
1Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Steel Investment Casting for CAP for Carbine 9mm
Description : Steel Investment Casting for CAP for Carbine 9mm()
Specification : STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-3870*2 OF 9MM CARBINE 1A1
DRG.NO.QX-175 DC NO:36103-A,DT.29.03.96 [ MATERIAL:GLAZE BOARD TO JSS-8135 -13-2014 Rev 3 5257-ME ,DT-18.06.14 OR CARTON BOARD TO JSS-8135-15-2010 REV-2 , DC NO . 4066 ME , DT-19.07.10
C
Not Estab.
2) DISC MAGAZINE ()
DRG.NO.QX-211DC NO-35703-A, DT.03.05.94 FOR FUZE 117 MK-20
C
Not Estab.
Category : P
Grade : II
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) COLLAR FOR PACKING OF 105 MM IFG NC()
ISV 1376
C
Estab
2) AMMUNITION CONTAINER 39A/L()
ISV 414A
C
Estab
3) AMMUNITION CONTAINER 40A/L()
ISV 415A
C
Estab
4) AMMUNITION CONTAINER 53 A/L()
ISV 463A
C
Estab
5) AMMUNITION CONTAINER 66A()
ISV 518A
C
Estab
6) PAPER CRAFT AMMUNITION()
JSS 8135 017 2002
C
Estab
7) PAPER LAMINATED GRADE I()
IND/ ME /786 (C)
C
Estab
8) PAPER LAMINATED GRADE III SIZE 914MM WIDE x 0.65 TO 0.73 MM THICK()
IND/ME /786 (C)
C
Estab
9) PAPER LAMINATED GRADE III SIZE 127MM WIDE x 0.65 TO 0.73 MM THICK()
IND/ME/786(C)
C
Estab
10) PAPER LAMINATED GRADE II 914MM WIDE()
IND/ME/786 (C)
C
Estab
11) SLEEVE B FOR PACKING OF FUZE 162()
PROP/SK -294
C
Estab
12) 6580853267- AMMUNITION CONTAINER 63A()
DRG. NO. ISV 506A
E
Established
Category : DP
Grade : II
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) DISC()
DRG. NO.2-013535/53-00-482M/14, DC NO.36785-A, DT.08.10.2001.
C
Not Estab
2) DISC, PWF 12.7MM DIA()
JSS-9310-06:2002, REAFD.2011 DC NO.5044 ME, DT.15.12.11 AS PER DRG. NO.IQX-144-GF, ITEM NO.4.
C
Not Estab
3) PAPER CARTON BOARD ()
JSS: 8135-15-2010, REV.NO.2 DC NO.4066 ME, DT.19.07.10 WITH CUPPING QUALITY SIZE: 760MM*890MM*0.762MM THICK.
C
Not Estab
4) AMMN. CONTAINER 39 A/L ()
DRG. PART NO-ISV-414 A, DC NO-36411-A DT.23.04.98, SPECN: CQA(A) 2805 (H) DC:36145-A .
C
Not Estab
5) PAPER WRAPPING WAXED KRAFT AMMN.(BROWN)()
JSS-8135-05:2013(REV 4), DC NO.5186-ME, DT.19.03.2014 SIZE:482*635*0.15 to 0.18 MM (T).
C
Not Estab
6) DISC PAPER WHITE FINE, 30.99MM DIA ()
MATERIAL:-PAPER WHITE FINE AMMN.TO JSS: 9310-06:2002, DC:5044-ME, DT.15.12.11 REAFFIRMED 2011 SUBSTANCE-42-46 GSM) FOR CE PELLET MK 1/1/L, 53.16 GRAM TO DRG. NO.SX 12 AF.
C
Not Estab
7) DISC, 45.2MM DIA, PAPER WHITE FINE AMMN ()
JSS:9310-06:2011, DC: 5044 ME, DT.15.12.2011 TREATED WITH NC LACQUER AND DUSTED WITH FRENCH CHALK. REF. DRG.NO.CIA/AMN/2176, PART NO-ISX-77 GF, ITEM NO-3, DC:37013-A, DT.06.05.2005
C
Not Estab
8) MILL BOARD DISC ()
SIZE: 93MM DIA x3MM THICK (WAXED), DRG. NO:CIA/AMN/2650,DRG.PART NO.ISV-482 GA DC NO.37330-A, DT.04.02.2013 MATERIAL: MILL BOARD TO JSS: 9310-01-2014-Rev-3 DC-5290 ME DT.04.02.2013.
C
Not Estab
9) TUBE, PAPER()
DRG. NO.ISX 18 SA DESIGNERS REF NO-CIA/AMN/1900. DCI 35462-A DT.03.03.93
C
Not Estab
10) DISC ()
DRG. CIA/AMN/1901 DETAIL.2 PART NO: IQX-783 FOR PELLET SMOKE, 42.5 GRAM, TNT/AL70/30 TO DRG. CIA/AMN/1901 DCI 35462-A DT.3.3.93. [MATERIAL:PAPER WHITE FINE TO SPECN.JSS 9310-06:2002 REAFFIRMED 2011]
C
Not Estab
11) DISC DIA. 32.25MM X 0.5MM THICK GLAZED BOARD ()
JSS:8135-13:2014, REV-3,DC:5257-ME, DT.18.06.14 PA 1992 WAXED (REF: DESIGNERS REF. NO.CIA/AMN/2176, PART NO.ISX-77GF, ITEM NO-9 DC:37013-A, DT.06.05.2005)
C
Not Estab
12) DISC PAPER WRAPPING HARD, 30.99 MM DIA. MATERIAL-PAPER CRAFT AMMN. ()
SPECIFICATION JSS: 8135-017:2010, DC-5016-ME DT.16.03.2011 FOR CE PELLET (MK 1/1/L, 53.16 GRAM) TO DRG. NO.SX 12 AF. DC NO.35452-A DT.07.09.93.
C
Not Estab
13) AMMN. CONTAINER 40A/L()
DRG. PART NO ISV-415A, DC NO: 35975-A DT.14.07.95 SPECN: CQA(A) 2805 (H), DC NO.36145-A .
C
Not Estab
14) COLLAR()
DRG. PART NO.ISV-1376, DC NO.34844-A DT.09.04.90
C
Not Estab
15) DISC(WAXED)128MM DIA x 6MM THICK WAXED ITEM NO-5 ()
PART NO.ISV-338 GA. DCI 35574-A Dt.3.9.93 MATERIAL-MILL BOARD TO SPEC JSS 9310-01-1994 REV-1 DC.3279-ME 21.02.95
DRG PART NO:ISV-483 GA. DCI NO. 35983-A DT.29.7.95 MATERIAL: MILL BOARD TO JSS:9310-01-1994, DC NO:3279-ME DT.21.02.1995
C
Not Estab
17) DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 ()
DRG PART NO.ISV-483 GA. DCI 35983-A DT.29.07.95
C
Not Estab
18) WASHER FOR FUZE DA 5A()
DRG.NO.QX176FD-650, DC-35781-A DT.22.08.94.
C
Not Estab
19) GLAZED BOARD WASHER()
DRG. NO.FD672 TO DRG. PART NO.QX-175, DC NO.36103-A DT.29.03.96
C
Not Estab
20) STRIP PAPER WHITE FINE (55X33) MM MATERIAL: PAPER WHITE FINE 42-46 GSM ()
JSS-9310-06:2002 (REAFFIRMED 2011).
C
Not Estab
21) RING()
DRG. NO.1933 DET. NO.6 TO PT. ITV 172. DC-36529-A DT.18-02-99.
C
Not Estab
22) CARTON BOARD SIZE (260X70X0.51) MM ()
JSS 67-07:APR 65.(ONE SIDE WHITE) DC NO.3253-ME DT.14.01.95.
C
Not Estab
23) BOARD GLAZED AMMN. 914.4MM X 304.8MM X 0.508MM ()
JSS:8135-13:2014 REV-3 DC.NO.5257 ME DTD.18.06.14.
C
Not Estab
24) DISC D=18B7MM X 0.5 TO 0.9 MM THICK ()
MATERIAL SPECN. TO GOST: 21641-76 OR MILL BOARD TO JSS-9310-01: 2014 , REV-3, DC NO.5290-ME DT-16.12.14 OR BOARD STRAW TO SPECN.JSS:8135-11-2008 (REVISION NO.2) DC NO.3553-ME, DT. 12.3.99 REF DRG.NO.4-027043 P-A00E14-79 3EP4000 FOR AP/T & 4-027044 30P
C
Not Estab
25) PAPER BROWN (WAXED), 280*195(MM) ()
MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05-2013-REV.4 DC-5186-ME DT.19.03.14.
C
Not Estab
26) PAPER TUBE (AP/T) ID=17A5mm X OD=18.1C5mm X L=19.5B8Amm ()
MATERIAL SPECN.PAPER CRAFT AMMN.TO JSS 8135-017:2002, DC NO.3731-ME, DT-16.5.2002.
DRG NO.bW8.685.066-01(3-0116278), DCI NO.34183-A, DT-28.7.87. MATERIAL WRAPPING PAPER TO SPEC. GOST-8273-75, GSM 60-120/JSS 8135-017:2002, DC NO. 3731-ME/16.05.2002.
C
Not Estab
30) PAPER BROWN (WAXED), 320*280(MM) ()
MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05-1994, DC NO.3732-ME DT.16.05.2002.
Specification : MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm.
R
Estab
6) MILL BOARD 800 X 550 X 2.5 MM TH (1421203628)[14]()
Specification : MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA
R
Estab
7) PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313[14]()
Specification : PAPER KRAFT AMMN SIZE 482.6 X 635 MM WIDTH BURSTING STRENGTH 308.9 kpa SUBSTANCE 125+/-5 g/m2 TO SPECN:-JSS-8135-17-2016 (REVISION NO.1) DC NO. 5493-ME DT.24/09/16
R
Estab
Category : P
Grade : I
Size :
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313
Description : PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313()
Specification : PAPER KRAFT AMMN SIZE 482.6 X 635 MM WIDTH BURSTING STRENGTH 308.9 kpa SUBSTANCE 125+/-5 g/m2 TO SPECN:-JSS-8135-17-2016 (REVISION NO.1) DC NO. 5493-ME DT.24/09/16
C
Nonestab
2) PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178
Description : PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178()
Specification : PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.
C
Nonestab
3) PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676
Description : PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676()
Specification : PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014.
C
Nonestab
4) PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515
Description : PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515()
Specification : PAPER WHITE FINE AMMN. 51X76CMS X 42-46 GSM SPECN: JSS-9310-06:2002 (REAFF.2011) DC NO 5044-ME DATE - 15/12/2011.
Specification : BOARD GLAZED CALENDERED AMMN. SIZE 914.4mm x304.8mm x0.508mm +/- 0.051 mm THICK TO SPECN:- JSS-8135-13:2014 REVISIONNO.3
C
Nonestab
6) PAPER BOARD CORRUGATED LF 1411817752
Description : PAPER BOARD CORRUGATED LF 1411817752()
Specification : PAPER AND BOARD CORRUGATED AMMN. DOUBLE FACED, FINE FLUTE, TO SPECN:- JSS-8135-08:1998 (REVISION NO.-2) DC NO.3753-MEDT.12-12-2002 TO SIZE 787.4 mm X 558.8 mm X 2.5 MM THICK.
C
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6584113807 LAMINATED PAPER CONT 120FSAPDS MKII[65]()
Specification : LAMINATED PAPER CONTAINER FOR 120MM FSAPDS MK-II TO ARDEDRG.NO. 1006 05 15 00 00 000 00TA (DOCUMENT NO.DRDO-ARDE-DOA-SPEC-247-2018)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6581233026 END CAP FOR CONTAINER 40A TO DRG PT NO ISV 1123 SHEET STRIP TO SPECN NO IS 1079 2017 OR IS 513 2008 OR BS 1449 PT 381968 CS4 OR BS 1449 PT 3A 1964 HS4A[65]()
Specification : END CAP FOR CONTAINER 40A TO DRG.PT.NO.ISV 1123 SHEET/STRIP TO SPECN. NO.IS 1079:2017 OR IS 513:2008 OR BS 1449 PT 381968-CS4 OR BS 1449 PT 3A-1964-HS4A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6584113920 LAMINATED PAPER CONTAINER FOR 120MM HESH DRG NO 1006 05 15 00 00 000 44TA[65]()
Specification : LAMINATED PAPER CONTAINER FOR 120MM HESH.DRG NO.:1006 05 15 00 00 000 44TA.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bhandara
[ENR Registration]
Name
Specification
Use
Status
1) Paper Liner for Packing 68mm Arrow Charges
Description : Paper Liner for Packing 68mm Arrow Charges()
Specification : PAPER LINER FOR PACKING 68 MM ARROW CHARGES AS PER SPECN. IA/918 C-(g) DC (I) 33749-A AND DRG.NO.ARM-1503-C.
R
Estab
Category : p
Grade : 2
Size :
S
1Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) INSERT TO DRG.NO.4-24929/3 K33/040
Description : INSERT TO DRG.NO.4-24929/3 K33/040()
Specification : INSERT TO DRG.NO.4-24929/3 K33/040 DC NO.36875-A, dt.27.12.02.PART DRG NO.TUBE TO DRG NO 4-24929/3RK33/017 DC NO.36891-A Dtd.05-04-03,TUBE TO Drg No 4-24929/3RK33 /019 DC No 34147-A Dt.04.06.87
C
Estab
2) CYLINDER TO DRG.NO.BL/CD/CC-130/035
Description : CYLINDER TO DRG.NO.BL/CD/CC-130/035()
Specification : CYLINDER TO DRG.NO.BL/CD/CC-130/035DT.16.04.2001.(REF.DRG.NO:3-022483/54-bH-482/13, DC NO:36134-A, DT.04.07.96 NOTE:TO BE SUPPLIED AS PER SMALL CYLINDER OF SIZE:LENTH:50MMx ID:115MM.
C
Estab
Category : p
Grade : 2
Size :
S
1Ordnance Factory Bhandara
Name
Specification
Use
Status
1) PAPER KRAFT AMMUNITION[14]()
Specification : PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-017: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN -
R
Nonestab
2) Paper Liner for Packing 68mm Arrow Charges[14]()
Specification : PAPER LINER FOR PACKING 68 MM ARROW CHARGES AS PER SPECN. IA/918 C-(g) DC (I) 33749-A AND DRG.NO.ARM-1503-C.
R
Nonestab
3) Piece Packing Mill Board[25]()
Specification : PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.
R
Nonestab
4) PAPER WRAPPING WAXED CRAFT AMMUN[14]()
Specification : PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05-2013 REV.NO 4, DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG.
R
Nonestab
5) PAPER WHITE FINE AMMUN[14]()
Specification : PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2002 (REAFFIRMED 2011). (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.
R
Nonestab
6) PAPER WASHER GLAZED BOARD[64]()
Specification : PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. .
R
Nonestab
7) PAPER CORRUGATED AMMUNITION[14]()
Specification : PAPER CORRUGATED AMMUNITION SINGLE FACED COARSE FLUTE WIDTH 26" TO JSS-8135-08-2014, REV.NO.4.
1) CONVERSION OF ZINC PLATED MOTOR TUBE INTO LINED MOTOR TUBE OF PINAKA MK 1 AS PER ARDE DRAWING NO 1905 01 01 00 02 000 12DA
Description : CONVERSION OF ZINC PLATED MOTOR TUBE INTO LINED MOTOR TUBE OF PINAKA MK 1 AS PER ARDE DRAWING NO 1905 01 01 00 02 000 12DA()
Specification : CONVERSION OF ZINC PLATED MOTOR TUBE INTO LINED MOTOR TUBE OF PINAKA MK-1(E) AS PER ARDE DRAWING NO. 1905 01 01 00 02 000 12DA
C
Estab
Category : p
Grade : 1
Size :
O
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) CONVERSION OF ZINC PLATED MOTOR TUBE INTO LINED MOTOR TUBE OF GUIDED PINAKA AS PER ARDE DRAWING NO 1102 01 01 00 01 000 12DA
Description : CONVERSION OF ZINC PLATED MOTOR TUBE INTO LINED MOTOR TUBE OF GUIDED PINAKA AS PER ARDE DRAWING NO 1102 01 01 00 01 000 12DA()
Specification : CONVERSION OF ZINC PLATED MOTOR TUBE INTO LINED MOTOR TUBE OF GUIDED PINAKA AS PER ARDE DRAWING NO.1102 01 01 00 01 000 12DA
1) ASSEMBLY STRUT WITH PIN HD SYSTEM TO DRG NO ADRDE 1403 02
Description : ASSEMBLY STRUT WITH PIN HD SYSTEM TO DRG NO ADRDE 1403 02()
Specification : ASSEMBLY STRUT WITH PIN HD SYSTEM TO DRG. NO. ADRDE-1403-02
C
Estab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) COUPLING ASSY CONTAINING OF COUPLING SUB ASSY TO DRG NO ADRDE 1403 01 02A 20 NOS IN EACH SET COUPLING NUT TO DRG NO ADRDE 1403 01 03 20 NOS IN EACH SET LOCK WASHER TO DRG NO ADRDE 1403 01 04 20 NOS IN EACH SET 6245140302
Description : COUPLING ASSY CONTAINING OF COUPLING SUB ASSY TO DRG NO ADRDE 1403 01 02A 20 NOS IN EACH SET COUPLING NUT TO DRG NO ADRDE 1403 01 03 20 NOS IN EACH SET LOCK WASHER TO DRG NO ADRDE 1403 01 04 20 NOS IN EACH SET 6245140302()
Specification : COUPLING ASSY. CONTAINING OF:- COUPLING SUB ASSY TO DRG NO.ADRDE/1403-01-02A-20 NOS IN EACH SET.COUPLING NUT TO DRG NO. ADRDE/1403-01-03 -20 NOS IN EACH SET.LOCK WASHER TO DRG NO.ADRDE/1403-01-04 -20 NOS IN EACH SET 6245140302
C
Estab
2) BRACKET SMALL TO DRG NO ADRDE 1403 01 01 10 6245140310
Description : BRACKET SMALL TO DRG NO ADRDE 1403 01 01 10 6245140310()
Specification : BRACKET SMALL TO DRG NO ADRDE/1403-01-01-10
C
Estab
3) EYE BOLT SMALL TO DRG NO ADRDE 1403 01 01 12 6245140312
Description : EYE BOLT SMALL TO DRG NO ADRDE 1403 01 01 12 6245140312()
Specification : EYE BOLT SMALL TO DRG NO ADRDE/1403-01-01-12.
C
Estab
4) EYEBOLT LARGE TO DRG NO ADRDE 1403 01 01 15 6245140315
Description : EYEBOLT LARGE TO DRG NO ADRDE 1403 01 01 15 6245140315()
Specification : EYEBOLT LARGE TO DRG NO ADRDE/1403-01-01-15
C
Estab
5) BRACKET CORNER LEFT TO DRG NO ADRDE 1403 01 01 07L 6245141409
Description : BRACKET CORNER LEFT TO DRG NO ADRDE 1403 01 01 07L 6245141409()
Specification : BRACKET CORNER (LEFT) TO DRG NO ADRDE-1403-01-01-07L
C
Estab
6) BRACKET CORNER RIGHT TO DRG NO ADRDE 1403 01 01 07R
Description : BRACKET CORNER RIGHT TO DRG NO ADRDE 1403 01 01 07R()
Specification : BRACKET CORNER (RIGHT) TO DRG. NO. ADRDE-1403-01-01-07R
C
Estab
Category : ddp
Grade : 1
Size :
S
1Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 6044000600 TAIL UNIT 2A
Description : 6044000600 TAIL UNIT 2A()
2) Machining of jobs up to dia 100mm length 0.8 mtr. max. 250*205*250mm including ferrous & Non ferrous metal alloys()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
3) Jigs & Fixtures up to max. weight 100 Kgs.()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
4) Fasterners (Non Standards)()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
5) Flow Form Tubes & components upto 650 mm dia max. length 4500 mm()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
Category : P
Grade : II
Size :
S
1Metal and Steel Factory
Name
Specification
Use
Status
1) MS Starter Plate size 20mm X 1000mm X 1200mm. Fully Machined as per Drg. & fitted with Boss 03 No. in each plate()
As per MSF Drawing No. ESR/1000/03
R
Not Estab.
2) Steel Blank to size 125mm X 125 mm X 3.15 (+/- 0.05mm) Thick()
Steel Specification : IS 513/1994 Grade-DD (Deep Drawn Quality) with best surface finish condition
R
Not Estab.
Category : P
Grade : I
Size :
S
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) steel tube OD 159[03]()
Specification : steel tube OD 159 + 1.0/-0.6 mm, ID = 132.8 + 0.6/-1.0 mm, length = 700 +/- 2.0 mm as per specn: BS 970 GR 817 m 40 (EN24) for AFT Motor of RGB 60 EN24
R
Nonestab
2) STEEL TUBE FOR INNER CYLINDER OF RGB 60[03]()
Specification : STEEL TUBE SPCN:BS 970 GR 817 M 40(EN24) OD=159.0 +/-0.6MM, ID=132.8+/0.6MM,LENGTH=170.0+/-2MM,OR ITS MULTIPLES BUT LENGTH NOT TO EXCEED 3000MM FOR INNER CYLINDER OF RGB60
R
Nonestab
3) STEEL TUBE FOR CF MOTOR OF RGB 60[03]()
Specification : STEEL TUBE AS PER SPCN:BS 970 GR 817 M 40(EN24)
SIZE:OD 180 (+0/-2.0)MM, ID 155(+2.0/-0)MM IN THE LENGTH OF 2M OR ITS MULTIPLES FOR CF MOTOR OF RGB 60
R
Nonestab
4) STEEL TUBE FOR RGB 60 TAIL OUTER CYLINDER[03]()
Specification : SUPPLY OF STEEL TUBE FOR RGB 60 TAIL OUTER CYLINDER AS PER SPECIFICATION: BS 970 GR 817 M 40(EN 24) OD=219+/-0.7MM,ID= 199.8+/-0.6MM,LENGTH=215.0 +/-2MM OR ITS MULTIPLES BUT LENGTH NOT TO EXCEED 3000MM
R
Nonestab
Category :
Grade : Grade III
Size :
M
1Opto Electronic Factory
Name
Specification
Use
Status
1) LENS-1 AS PER DRG NO 096701030000027 (LF 2690000157)[26]()
Specification : LENS-1 AS PER DRG NO 096701030000027 (LF 2690000157)
C
Estab
2) LENS-2 AS PER DRG NO 096701030000025 (LF 2690000158)[26]()
Specification : LENS-2 AS PER DRG NO 096701030000025 (LF 2690000158)
C
Estab
3) LENS-3 AS PER DRG NO 096701030100012 (LF 2690000159)[26]()
Specification : LENS-3 AS PER DRG NO 096701030100012 (LF 2690000159)
C
Estab
4) LENS-4 AS PER DRG NO 096701030100011 (LF 2690000160)[26]()
Specification : LENS-4 AS PER DRG NO 096701030100011 (LF 2690000160)
C
Estab
5) LENS-5 AS PER DRG NO 096701030200037 (LF 2690000161)[26]()
Specification : LENS-5 AS PER DRG NO 096701030200037 (LF 2690000161)
C
Estab
6) LENS-6 AS PER DRG NO 096701030200035 (LF 2690000162)[26]()
Specification : LENS-6 AS PER DRG NO 096701030200035 (LF 2690000162)
C
Estab
7) HEAD WINDOW(THERMAL) AS PER DRG NO 096702000000072 (LF 2690000163)[26]()
Specification : HEAD WINDOW(THERMAL) AS PER DRG NO 096702000000072 (LF 2690000163)
C
Estab
8) FRONT THERMAL WINDOW COMMANDER'S CUPOLA(FINISHED) AS PER DRG NO 096700000000088 (LF 2690000164)[26]()
Specification : FRONT THERMAL WINDOW COMMANDER'S CUPOLA(FINISHED) AS PER DRG NO 096700000000088 (LF 2690000164)
C
Estab
9) HEAD MIRROR(THERMAL) FINISHED AS PE DRG NO 096702000000070 (LF 2690000165)[26]()
Specification : HEAD MIRROR(THERMAL) FINISHED AS PE DRG NO 096702000000070 (LF 2690000165)
C
Estab
10) 6.5" TFT Monitor part no. C-VIEW 0610 (LF 9001121274)[74]()
Specification : 6.5" TFT MONITOR PART NO. C-VIEW 0610 WITH COVER (DRG. NO. OLF/R&D/CTI-T-72/039) OVER TFT MONITOR.
C
Estab
11) TI WINDOW FOR DTI OF T-90 TANK (LF-2690000177)[26]()
Specification : AS PER DRAWING NO.138100000201 G12
C
Estab
12) 7441121722 POWER SUPPLY CARD AS PER ATTA[74]()
Specification : POWER SUPPLY CARD AS PER ATTA.
C
Estab
13) 2612884803 MOULD OF GERMANIUM WINDOW[26]()
Specification : MOULD OF GERMANIUM WINDOW / OPT/MISC/476M1
C
Estab
14) 2690000171 LENS 1 FOR DTI[26]()
Specification : LENS-1 FOR DTI OF T-90 / 138100000201 G07
C
Estab
15) 2690000173 LENS 3 FOR DTI OF[26]()
Specification : LENS-3 FOR DTI OF T-90 / 138100000201 G09
C
Estab
16) 2690000172 LENS 2 FOR DTI[26]()
Specification : LENS-2 FOR DTI OF T-90 TANK / 138100000201 G08
C
Estab
17) 9927098596 COATING ON GE LENS[99]()
Specification : COATING ON GE LENS OF TI-ESSA / MRS5000061
5) PLYWOOD 6MM X 5PLY X 1.2M X 1.2M (2270433342)()
PLYWOOD TYPE MR GRADE TYPE BB SIZE 6MM x 5PLY x 1.2M x 1.2M SPECN: IS-303-1989 (3rd REVISION).REAFFIRMED-2008 DC NO.5122-ME DT.06/05/2013 WITH AMENDMENT NO.6 AUGUST 2007 WITH ISI MARK
R
Non Established
6) PLYWOOD 19MM X 9 PLY X 1.2MX1.2M (2270525257)()
PLYWOOD M R GRADE TYPE A A TO SPECIFICATION IS-303-1989. (3rd REVISION).REAFFIRMED-2008 DC NO.5122-ME DT.06/05/2013WITH AMENDMENT NO.6 AUGUST 2007 WITH ISI MARK.SIZE 1.2 M X 1.2 M X 9 PLY X 19 MM THICK
R
Non Established
7) PLYWOOD 16MM X 9 PLY X 1.2MX1.2M (2270525255)()
PLYWOOD MR GRADE TYPE A A TO SPECIFICATION IS-303-1989. (3rd REVISION).REAFFIRMED-2008 DC NO.5122-ME DT.06/05/2013WITH AMENDMENT NO.6 AUGUST 2007 WITH ISI MARK.SIZE:- 1.2 M X 1.2 M X 9 PLY X 16 MM THICK
R
Non Established
8) PLYWOOD BWR 19MM X 9PLY X 1.2MX1.2M (2270525256)()
PLYWPOOD GRADE BWR TYPE AA SIZE 1.2M X 1.2M X 9 PLY X 19MM THICK TO SPECN.I S :303=1989
R
Non Established
Category : P
Grade : III
Size :
S
1Ordnance Equipment Factory
Name
Specification
Use
Status
1) PLYWOOD VARIOUS()
AS PER REQUIREMENT & SPECIFICATION
R
Category : S
Grade : III
Size :
O
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX 751 ROUND PART NO 5227284 LF 9911358475[99]()
Specification : BOX 751/ROUND PART NO.5227284 TO OEM DRG.NO.5227284/TRD DRG.NO.2.2.2861
E
Nonestab
2) TIMBER OF ANY SPICES 20X170X1000MM LF 2255541041[22]()
Specification : TIMBER OF ANY SPICES 20X170X1000MM
P
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BOX COMPLETE ROUND PART NO 522282 LF 9911358479
Description : BOX COMPLETE ROUND PART NO 522282 LF 9911358479()
Specification : BOX COMPLETE/ROUND PART NO.5227282.
E
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TIMBER PLANK 13 X 172MM X 2 5M LF 2255055301[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIK 13 x 172MM x 2.5M.
R
Nonestab
2) TIMBER PLANK 22 X 85MM X 2 5M LF 2255055302[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIC 22 x 85MM x 2.5M.
R
Nonestab
3) TIMBER PLANK 16 X 75MM X 2 5M LF 2255055303[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIC 16 x 75MM x 2.5M.
R
Nonestab
4) TIMBER PLANK 16 X 110MM X 2 5M LF 2255055304[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIC 16 x 110MM x 2.5M.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX W-131 M-3/L WOODEN ISV-162A[65]()
Specification : BOX W-131 MK-3/L WOOD TO DRG PT NO. ISV/162-A DC-35568-A DATE 1/9/93 SPECN:-IA-948(ak) DC-36868-A, AIDE MEMOIRE W/4
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LIST OF COMPONENTS ENCLOSED.-O.F.KHAMARIA[99]()
Specification : AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LIST OF COMPONENTS ENCLOSED.
E
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CRATE 12A WOODEN ISV-483A (HEAT/TPT[65]()
Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM
1) 6576774300 PACKING BOX FOR RIGID CUTTING CHARGE 85 MM[65]()
Specification : PACKING BOX FOR RIGID CUTTING CHARGE 85 EMPTY TO DRG NO HE/CAST/079 DET.1 TO17 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255526024 TIMBER N C SIZE 75 75 MM[22]()
Specification : TIMBER NON-CONIFEROUS, SIZE 75 MM X 75 MM X 1.80M TO 1.83MAS PER SPECN. NO. IND/ME/883(F)(PROV) DC NO.3754-MEDT. 12-12-2002.
R
Nonestab
2) 2270441000 PLY WOOD 3 MM CWR[22]()
Specification : PLYWOOD FOR GENERAL PURPOSES MR GRADE TYPE AB SIZE 2.40 M X 1.20 M X 3 MM THICK (3 PLY) TO SPECN. IS: 303-1989, THIRD REV., AMDT. 2, REAFFIRMED 1998
R
Nonestab
3) 6576773700 PACKING BOX FOR MODULAR CHARGE 220G[65]()
Specification : PACKING BOX FOR MODULAR CHARGE 220G COMPRISING OF 5 ITEMS TO DRG. NO. HE/CAST 077 DET 1 TO 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
4) 6576773900 PACKING BOX FOR SHAPED CHARGE 30MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 30MM COMPRISING OF 6 ITEMS TODRG. NO. HE/CAST 084 DET 1 TO 6 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2270353012 PLY WOOD 3 MM BWR BB[22]()
Specification : PLYWOOD TYPE BB BWR GRADE TO SPECN. IS: 303 - 1989,SUPPLEMENTARY SCHEDULE CIGS/SS/37 (C) WITH AMENDMENT NO 1 TO 4 CATALOGUE NO H3/5530 - 000036,SIZE:- 1.20 M X 1.20 M X 3 MM -3 PLY
R
Nonestab
2) 2270460637 PLY WOOD 12 MM MR AA[22]()
Specification : PLY WOOD GENERAL PURPOSE TO GRADE MR TYPE AA TO SPECN.IS:303-1989 WITH AMENDMENT NO.2,SIZE - 1.20 M X 1.20 M X 12 MM TH.9 PLY.
R
Nonestab
3) 2255058168 TIMBER MANGO[22]()
Specification : TIMBER MANGO SIZE - 85 MM X 23 MM X 1.25 M TO 1.28 M SPECN.NO. IND/ME/883 (F) (PROV) DC - 3754 - ME DT.12/12/2002.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774000 PACKING BOX FOR SHAPED CHARGE 60 MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 60 MM COMPRISING OF 8 ITEMS TO DRG NO. HE/CAST 085 DET 1 TO 8 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
2) 6576774100 PACKING BOX FOR SHAPED CHARGE 90 MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 90 MM COMPRISING OF 10 COMPONENTS TO DRG NO. HE/CAST 086 1 TO 10 EXCLUDING 90 MM CHARGE & SET OF LEGS) & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576773800 PACKING BOX FOR MODULAR CHARGE 350G[65]()
Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2270463030 PLY WOOD 4 MM[22]()
Specification : IS:303 -1989
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Nalanda
Name
Specification
Use
Status
1) WOODEN CRATE[65]()
Specification : OFN/BMCS/M-92/M-91/ WOODEN CRATE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) TIMBER M H C PLANKS 2255055300
Description : TIMBER M H C PLANKS 2255055300()
Specification : TIMBER MANGO/HOLLOCK/CHAPLAS PLANKS KILN SEASONED & PRESSURE TREATED UNPLAND OR ANY OTHER SPECIES COVERED BY THE SPEC:- IND/ME/883 (f) (PROV) DC NO 3539-ME DT 24/10/98 SIZE 52MM X 152MM X 1.6M LONG
Specification : ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS.
Drg. No.9-04367/9 - - 104/38.316.101, DC No.36309-A, Dt.14.07.97
C
Not Estab.
2) WASHER ALUMINIUM,OD:7.62MM +/-0.05 ID:5.08+/-0.13MM, THICKNESS;0.64MM TO 0.51MM ()
DRG.NO.FD-650 PART NO.QX-176,DC NO.35781-A,DT.02.07.2014
C
Not Estab.
3) WASHER GLAZED BOARD ()
Drg. No.QX-175, DC No.36103-A, Dt.29.03.96 [ MATERIAL:GLAZE BOARD TO JSS-8135 -13-2014 Rev 3 5257-ME ,DT-18.06.14 OR CARTON BOARD TO JSS-8135-15-2010 REV-2 , DC NO . 4066 ME , DT-19.07.10
C
Not Estab.
4) SCREW SET SLOTTED HEAD, FULL DOG POINT NO.2BA ()
Designer’s Ref. No.CIA/AMN/885, DC No.33833-A, Dt.19.12.87
C
Not Estab.
5) WASHER DETAIL 54 ()
DRG.NO.3-016919/53-B-025 Y FOR FUZE B429E.DC-37284A DT.06.07.11
C
Not Estab.
Category : P
Grade : III
Size :
S
1Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) DIOPTER RING
Description : DIOPTER RING()
Specification : DIOPTER RING TO DRG NO. GCF/50/39214
C
Estab
2) RAMMER HEAD
Description : RAMMER HEAD()
Specification : AS SPECIFIED IN DRAWING
C
Estab
3) COVER RING TO DRG NO A 51203 73
Description : COVER RING TO DRG NO A 51203 73()
Specification : COVER/ RING TO DRG NO A 51203-73
C
Estab
4) Small & Medium Size Components
Description : Small & Medium Size Components()
Specification : As per GCF/Drg/Size/Specn/IS
C
Estab
5) Pullers
Description : Pullers()
Specification : AS PER GCF /DRG/SPECN/IS/BS
C
Estab
6) All Steel Ring & Flanges
Description : All Steel Ring & Flanges()
Specification : AS PER GCF /DRG/SPECN/IS/BS
C
Estab
Category : p
Grade : 3
Size :
O
1Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) SUPPORTING RING FRONT
Description : SUPPORTING RING FRONT()
Specification : DET.8 TO DRG NO.ARDE-2139
C
Estab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) SUPPORTING RING FRONT
Description : SUPPORTING RING FRONT()
84MM TPT PROJECTILE FFV-65 (W/O TRACER-56D) TO DRG. NO F1301-047300 R DC NO. 36598-A DT 23/09/99
C
Nonestab
16) ALUMINIUM DISC, THICK .05 MM, DIA 10MM (9911357960)()
ALUMINIUM (DISC) COVER THICKNESS = 0.05 MM ,DIA = 10MM.TO DRG. NO. F1334-154820 B DC-35529-A DT.14/08/93
C
Nonestab
17) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)()
SHELL BODY BLANK (INTERNAL OPERATION)TO O.F.KHAMARIA DRG NO.TRD-839 (L)
C
Nonestab
18) CAP AND BOTTOM SPECN F1301-905060-P (9911350158)()
CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 &BOTTOM TO DRG NO F1301-029650-EDC NO. 36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91
C
Nonestab
19) BODY ASSY-4-26941-060 FOR (81MM SMK) (9911355970)()
BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87
C
Nonestab
20) PLUG LAUNCHER PED 902-01-401 (9911356473)()
PLUG (LAUNCHER PAD) TO DRG NO. 902-01-401DC-17988-W DT. 20-06-1994. SPECN.:-IND/ME/914 (PROV) DC-3496-ME DT. 06-02-98 GRADE C OR D HARDNESS 55 TO 70
C
Nonestab
21) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)()
TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY)TO DRG PT NO. IQX-69GE DC NO. 36650-A DT. 26/2/00 SPECN:- F-1301-910540-K (CQA-0910) DC36613-A DT 11/11/99
C
Nonestab
22) SAFETY LOCK ASSY -042-512 CB (9911356455)()
SAFETY LOCK ASSEMBLY TO DRG NO. bw6-042-512-C6 DC NO -34241-A DT 24/9/87
Specification : AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243.
C
Estab
4) CARBON NOZZLE BLANK FOR 84 HEAT-551 (9911357920)[99]()
Specification : CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.
C
Estab
5) VALVE DRG NO.5209565 FOR 84HEAT-551 (9911357921 )[99]()
Specification : VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247.
C
Estab
Category : ddp
Grade : Grade III
Size :
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]()
Specification : CQA (A) 2316
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY[63]()
Specification : SPECN. NO. CQA(A) 0917
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6541325748 TUBE FIRE TRANSMITTING FOR 81 MM[65]()
Specification : FIRE TRANSMITTING TUBE TO DRAWING PART NO.IRW 115,DC 37103-A DTD.02.04.2007 FOR 81MM AMMUNITION
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6380130100 PRIM ELE 1A/L(E) CARTG.105MM IFG SC[63]()
Specification : PRIMER ELECTRIC 1A/L EMPTY
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330130100 FZ 117 DA MK 20 E WITH CAP[63]()
Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3.
C
Nonestab
2) 6380800110 IGNITION TUBE IRW 92 FOR 120 MM HE[63]()
Specification : IGNITION TUBE TO DRG. NO. IRW 92, DESIGNER'S REFERENCE NO. CIA/AMN/706 DC 34760-A FOR BOMB 120 MM HE.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) EMPTY FUZE B 25M TO DRG TRD 1778 LF 9911357354[99]()
Specification : EMPTY ASSY.FUZE B-25M TO DRG.NO TRD-1778a ( CONSISTING OF 37 ITEM ) REQD. FOR 140 MM ROCKET
C
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SELF TAPPING SCREW DRG 121932.[99]()
Specification : SELF TAPPING SCREW TO DRG NO.TRD 121932.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SHUTTER PLATE TBRL LF NO 9911358300[99]()
Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0
C
Nonestab
2) SELF TAPPING SCREW DRG 121932 LF NO 9911357650[99]()
Specification : SELF TAPPING SCREW TO DRG NO.TRD 121932
C
Nonestab
3) 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529[99]()
Specification : 6th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Steel Screw (Qty-2nos), TBRL/MMG-H/BO/01/R1 2.Adaptor Screw (Qty-2nos),TBRL/MMG--H/BO/05/R2 3.Quarter Pin, TBRL/MMG-H/BO/03/R0
C
Nonestab
4) ARMING PYRO DELAY EMPTY TO DRG LF 9911358385[99]()
Specification : ARMING PYRO DELAY EMPTY TO DRG.NO.Khs-2-2-0405(a)
C
Nonestab
5) PYRO DELAY TUBE EMPTY LF 9911358384[99]()
Specification : PYRO DELAY TUBE EMPTY TO DRG.NO.Khs-2-2-0406(a)
C
Nonestab
6) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528[99]()
Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/
C
Nonestab
7) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527[99]()
Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.
1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/
MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR 30MM BMP-II AMMN. TO CQA(A) DRG.NO.[63]()
Specification : NOSE FUZE TYPE A 670M (EMPTY) FOR 30MM BMP-II AMMN. TO CQA(A) DRG.NO.bw.3.140.039.cb/c,DC-34241-A, DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) VALVE PART NO 404038806 LF 9911358407
Description : VALVE PART NO 404038806 LF 9911358407()
Specification : VALVE PART NO. 404038806 TO OEM DRG.NO.304074199 TRD.DRG.NO.3.2.2547
2) 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY
Description : 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY()
Specification : SPECN. NO. CQA(A) 0917
C
Estab
3) 6330130100 FZ 117 DA MK 20 E WITH CAP
Description : 6330130100 FZ 117 DA MK 20 E WITH CAP()
Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3.
C
Estab
4) 6380800110 IGNITION TUBE IRW 92 FOR 120 MM HE
Description : 6380800110 IGNITION TUBE IRW 92 FOR 120 MM HE()
Specification : IGNITION TUBE TO DRG. NO. IRW 92, DESIGNER'S REFERENCE NO. CIA/AMN/706 DC 34760-A FOR BOMB 120 MM HE.
