List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
861 M/s SANDEEP METALCRAFT PVT. LTD.
D-16 , MIDC Industrial Area, Hingna Nagpur Maharashtra
PIN1 : 440016
Phone No. : 7104237878
GSTIN : 27AACCS3222K1ZF 		NGPS00267B

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) NEEDLE HSG FINISH STLN X1802115 Description : NEEDLE HSG FINISH STLN X1802115() Specification : NEEDLE HSG. X 1802115 HASH IPL/FT.XL/45 C Estab
Category : ddp
Grade : 1
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) NEEDLE HSG FINISH STLN X1802215 Description : NEEDLE HSG FINISH STLN X1802215() Specification : NEEDLE HSG.X1802215 HASH IPL/FT.XL/46 C Estab
Category : dp
Grade : 2
Size : M
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) MEMBRANE TO CQA A DRAWING NO BW 8 363 012 DC 37271 A DT 08 11 10[00]() Specification : MEMBRANE TO CQA(A) DRAWING NO.BW 8.363.012 DC 37271-A DT. 08-11-10. C Nonestab
2) SAFETY LOCK ASSEMBLY TO DRG NO BW 6 042 512 CB DC 34241 A DT 24 09 87[00]() Specification : SAFETY LOCK ASSEMBLY TO DRG.NO.BW.6.042.512 CB DC-34241-A,DT 24.09.87,CONSISTING OF 4 COMPT.(1)SLIDER TO DRG.NO.BW8.264. 006 (2)CLIP TO DRG.NO.BW8.388.004 (3) CAP TO DRG.NO.BW8.635 006 (2)CLIP TO DRG.NO.BW8.388.004 (3) CAP TO DRG.NO.BW8.6 C Nonestab
3) DELAY TRAIN TO OFAJ DRG NO FS 2496B OR CQA A DRG NO BW 8 635 111 DC NO 37271 A DT 08 11 10[00]() Specification : DELAY TRAIN TO OFAJ DRG. NO. FS-2496B OR CQA (A) DRG NO. BW 8.635.111 DC NO. 37271-A DT. 08-11-10 C Nonestab
4) WASHER TO CQA AMMN DRG NO BW 9 440 010 DC 37271 A DT 08 11 2010[00]() Specification : WASHER TO CQA(AMMN.) DRG. NO. BW 9.440.010 DC 37271-A DT. 08.11.2010. C Nonestab
5) CAP II 1 TO DRG NO DET 1 DC 37271 A DT 08 11 10[00]() Specification : CAP II-1 TO DRG. NO. CQA(A)/AMN/2860 DET-1 DC 37271-A DT.08-11-10 C Nonestab
6) DISC TO CQA AMMN DRG NO BW 8 685 000 DC 34241 A DT 24 9 87[00]() Specification : DISC TO CQA(AMMN) DRG. NO. BW 8.685.000 DC-34241-A DT. 24.9.87 C Nonestab
7) HEAD TO CQA AMMN DRG NO BW8 633 050 DC 34241 A DT 24 9 87[00]() Specification : HEAD TO CQA(AMMN) DRG.NO. BW8.633.050 DC-34241-A DT.24.9.87 C Nonestab
8) SETBACK RING TO CQA A DRG NO BW8 249 058 DC 37271 A DT 08 11 10[00]() Specification : SETBACK RING TO CQA(A) DRG.NO.BW8.249.058 DC-37271-A DT.08-11-10 C Nonestab
9) LOCATOR TO CQA AMMN DRG NO 3 0105875 BW9 170 009 DC 34241 A DT 24 9 87[00]() Specification : LOCATOR TO CQA(AMMN) DRG. NO. 3-0105875/BW9.170.009 DC-34241-A DT.24.9.87 C Nonestab
10) DELAY TRAIN ATTACHMENT TO CQA A DRG NO BW9 II6 045 DC 37271 A DT 08 11 10[00]() Specification : DELAY TRAIN ATTACHMENT TO CQA(A) DRG.NO.BW9.II6.045 DC-37271 -A DT.08-11-10 C Nonestab
Category : p
Grade : Grade III
Size : M
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) BLANK FOR SAFETY CAP TO OFAJ DRG NO FS 2955 FOR FUZE 162 MK 8 AND MK 9[00]() Specification : BLANK FOR SAFETY CAP TO OFAJ DRG. NO. FS-2955 FOR FUZE162 MK-8 & 9. R Nonestab
2) BODY TO CQA A DRG NO IQX 239 DC 35434 A DT 30 12 92[00]() Specification : BODY TO CQA (A) DRG.NO. IQX-239 DC-35434-A, DT. 30.12.92 C Nonestab
3) DISC TO CQA AMMN DRG NO QX 336 DC 35434 A DT 30 12 92[00]() Specification : DISC TO CQA(AMMN) DRG.NO. QX-336, DC-35434-A DT. 30.12.92 C Nonestab
4) MAGAZINE WITHOUT SURFACE TREATMENT TO OFAJ DRAWING NO FS 2935[00]() Specification : MAGAZINE (WITHOUT SURFACE TREATMENT) TO OFAJ DRAWINGNO.FS-2935 C Nonestab
5) SHUTTER TO OFAJ DRG NO FS 957C[00]() Specification : SHUTTER TO OFAJ DRG. NO. FS-957C. C Nonestab
Category : p
Grade : Grade III
Size : M
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) CONTAINER CARTRIDGES FULLY FINISHED TO DRG NO ITV 30 DC 37344 A[00]() Specification : CONTAINER CARTRIDGES FULLY FINISHED TO DRG.NO.ITV-30 DC 37344-A C Nonestab
2) MAGAZINE TUBE TO OFAJ DRG NO FS 2475B FOR FUZE M842 FOR AMMN 20MM AMR HEI[00]() Specification : MAGAZINE TUBE TO OFAJ DRG.NO.FS-2475B FOR FUZE M842 FOR AMMN.20MM AMR HEI. C Nonestab
3) MAGAZINE TUBE TO OFAJ DRG NO FS 2487B FOR FUZE M859 FOR AMMN 20MM AMR SAPHEI[00]() Specification : MAGAZINE TUBE TO OFAJ DRG.NO.FS-2487B FOR FUZE M859 FOR AMMN.20MM AMR SAPHEI. C Nonestab
Category : p
Grade : Grade III
Size : M
1) Ordnance Factory Katni
Name Specification Use Status
1) CUP STEEL 81 MM SMOKE GRANADE[61]() Specification : CUP STEEL FOR 81 MM CONTAINER OF SMOKE GRANADE AS PER DRG. NO. SK-476 WITH AMENDMENT NO. 2684 DT:1.9.97 IN TRIMMED CONDITION R Nonestab
Category : p
Grade : Grade III
Size : M
1) Rifle Factory Ishapur
Name Specification Use Status
1) BARREL SLEEV FOR 12 BORE MODIFIED PUMP ACTION GUN[70]() Specification : AS PER DRAWING C Nonestab
2) CATCH SAFETY FINISH FOR PISTOL 9MM 1A.[70]() Specification : AS PER DRAWING C Nonestab
3) FOLDABLE BUTT FOR 5.56MM INSAS RIFLE[70]() Specification : AS PER DRAWING C Nonestab
4) MAGAZINE COVER PIPE FOR 12 BORE MODIFIED PUMP ACTION GUN[70]() Specification : AS PER DRAWING C Nonestab
5) SLIDE FINISH FOR 9MM AUTO PISTOL[67]() Specification : SLIDE TO DS.CAT. NO. 1005-003210(LT.DC-26822-SA DT.22-4-16) [MACRO ETCH TEST,DETERMINATION OF INCLUSION CONTENT AND SAM-PLING PLAIN REFER TO CQA(SA) NOTE SHEET NO.1 OF LATEST ISSUEAGAINST COLUMN "NATURE" C.] FOR PISTOL AUTO 9MM 1A. C Nonestab
6) BODY (FINISH) FOR PISTOL AUTO 9MM 1A.[67]() Specification : BODY TO DS CAT NO 1005-003145 (DC-26821-SA).MACRO-ETCH TEST ASTME 381-1984 WILL BE AS PER(C) OF SL.NO.1OF CQA(SA)NOTE SHT.NO.1, & NMIR TEST TO IS:4163 WILL BE ASPER COL.(C) OF SL.N C Nonestab
7) GAS REGULATOR FOR RIFLE 5.56MM.INSAS[70]() Specification : REGULATOR GAS. TO D S CAT NO.1005-007746 (DC-26518-SA)FOR RIFLE 5.56MM.INSAS.(TP TO CONFORM 300-350 HV AFTER H & T.MACRO ETCH TEST AS PERASTME 381-84 WITH ACCEPTANCE STD.C2,R2,S2 FOR PLATE -I & NILFOR PLATE II). C Nonestab
8) BLANK FOR STUD CHANGE LEVER .[79]() Specification : BLANK FOR STUD CHANGE LEVER TO RFI SK.7017-S (DC-NILDT.12/9/2001). FOR RIFLE 5.56 MM INSAS.TP OF MATL. TO BEBLANK CARBURISED TO ACHIEVE MECHANICAL PROPERTIES OF BASICMATL.& TO ACHIEVE 400-475 HV AFTER H&T.GRAIN SIZE TO CONFORMASTM 5 TO 8 C Nonestab
9) CYLINDER GAS FOR RIFLE 5.56MM INSAS[70]() Specification : CYLINDER GAS TO DSCAT NO.1005-560066(LATEST DC-25824-SA DT.29/07/03) FOR RIFLE 5.56MM INSAS C Nonestab
10) FLASH ABSORBER (WITHOUT PHOSPHATING)[79]() Specification : FLASH ABSORBER (WITHOUT PHOSPHATING)TO RFI.SK.-7770-S{DS CATNO.1005-007739(DC-24638-SA)}.NMIR TEST ASPER IS:4163-82 WITHACCEPTANCE STD.BETTER THAN 3(THIN)& 1(THICK)FOR A,B,C,D &MACRO ETCH TEST ASPER ASTME-381-84 WITH ACCPT.LIMIT C2 R2 S2F C Nonestab
11) BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993(DC-26469-SA).(COMPLETE ASSY.).FOR RIFLE 5.56MM INSAS[70]() Specification : BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993(DC-26469-SA).(COMPLETE ASSY.).FOR RIFLE 5.56MM INSAS C Nonestab
12) LEVER SLIDE LOCKING (SEMI FINISHED) FOR FOR PISTOL AUTO 9MM 1A.[70]() Specification : LEVER SLIDE LOCKING BLANK AS PER RFI SK 8035*3 FOR PISTOLAUTO 9MM 1A C Nonestab
Category : DDP,DP
Grade : II
Size :
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432100001 STEEL CUP WITH SEAL ARDE 2120 120 ARJUN[64]() Specification : CQA(A) 5709 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330604500 SLEEVE REGULATOR PT 42[63]() Specification : REGULATOR SLEEVE TO DRG. NO. 3-016919, 53-B-025Y,DET.NO.42, DC 34858-A FOR FUZE B-429. C Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki
Name Specification Use Status
1) FUZE PERCUSSION DA 5A, EMPTY() CQA(A) 0922(c) Component Established
2) FUZE PERCUSSION DA No 162 MK- 8(M-2)() CQA(A) 0917(h) Component Established
3) CARTRIDGE TRAINING FOR 81 mm (MTD) ASSEMBLY.() CQA(A) 2348(e) Component Established
4) NOTCHED COIL TO DESIGNER REF. ARDE 1933 DET. NO. 3, PT. NO. ITV 169() CQA(A) 2322 C Established
5) MINE APM 16 A1 CONSISTING OF (1) BODY LOADING ASSY. (2) CONTAINER ASSY. (3) SPOOL ASSY.() CQA(A) 1804 C Established
6) PLUG REPRESENTING FUZE DA5A AS PER DRG. NO. ARDE 2236, DET. NO.16, PT. NO. ITV 285() DRG. NO. ARDE 2236, DET. NO.16, PT. NO. ITV 285 C Non Established
7) PLUG TO DRG. NO. ARM/1225 A-4 DT.18.11.2005 SPECN. AIR 304-L() AIR 304-L C Non Established
8) GENERAL ARRANGEMENT FUZE K3M HE/PRACTICE EMPTY ASSEMBLED TO DRG NO. NAI(P) SKETCH - 324() DRG NO. NAI(P) SKETCH - 324 C Non Established
9) FUZE PERCN. D.A. NO.117 MK-20 EMPTY WITH CAP TO DES. REF. LS/10744/GE/341 PT. NO. QX 244 GE() IA 1204 C Established
10) TAIL UNIT 8 A WITH CAP, DES REF CQA(A)/ AMN/2906 PART NO ITV 26 SA SPECN CQA(A) 2324() CQA(A) 2324 C Established
11) FUZE MINE COMBINATION M 605 ASSEMBLY EMPTY.DRG. NO. CIA/AMN/85 PT. NO. IQX 28GE SPECN CQA(A) 1803() CQA(A) 1803 C Established
12) FIRE TRANSMITTING TUBE TO DRG. NO. CIA/AMN/900 PT. NO. IRW 115() DRG. NO CIA/AMN/900 PT. NO. IRW 115 C Non Established
13) FIRE TRANSMITTING TUBE TO DRG NO ARDE 1934 DET NO 3 PART NO IRW 203 WITH PASSIVATION.() DRG. NO.ARDE 1934 PT. NO. IRW 203 C Established
14) FUZE (EMPTY) FOR ROUND 40 MM MGL DRG. AFK/SK -576-09 Sht. 1() DRG. NO. AFK/SK -576-09 Sht. 1 C Non Established
15) TAIL UNIT 2A WITH TAIL ADAPTER DES REF CIA/AMN/1397 DRG PT NO ITV 11A FOR TAIL UNIT AND PT NO ITV-47() DRG. NO. CIA/AMN/1397 PT. NO. ITV 11A C Non Established
16) FUZE PERCUSSION DA NO 161 (M-3) CIA/ AMN/269 PART NO IQX 33 SPECN. CQA(A) 0920() CQA(A) 0920 R Non Established
17) 105 MM LONG RANGE INERT ROCKET (LRIR) EMPTY ASSEMBLED AS PER DRG.NO. NASK 987() DRG.NO. NASK 987 C Non Established
18) 105 MM MEDIUM RANGE INERT ROCKET (MRIR) EMPTY ASSLY. AS PER DRG. NO. NASK 989() DRG. NO. NASK 989 C Non Established
19) ROUND 40 MM DRILL ( PRACTICE ) DRG. NO. AFK/SK-694-11() DRG. NO. AFK/SK-694-11 C Non Established
20) PLUG FIRING REPRESENTING FUZE YDB-60 TO DRG. NO. NAI(P)SKETCH 360() DRG. NO. NAI(P)SKETCH 360 C Non Established
21) PLUG FIRING REPRESENTATING FUZE - K3M AS PER DRG. NO. NASK 997() DRG. NO. NASK 997 C Non Established
22) FUZE YDB 60 (EMPTY) TO DRG.NO. NAI(P) SK 284() DRG.NO. NAI(P) SK 284 C Non Established
23) 105 MM LONG RANGE CHAFF ROCKET (LRCR) (ASSEMBLED EMPTY) TO DRG. NO. NASK 760 SHEET 1 OF 2 SHTS() DRG. NO. NASK 760 SHEET 1 OF 2 SHTS C Non Established
24) ADAPTER NOSE MORTAR BOMB NO 1 MK 1/L STEEL DES. REF NO. DD (L) 11855, PT NO TV 44 SPECN. CQA(A) 2351() CQA(A) 2351 C Non Established
25) BODY OF PROJECTILE TO CQA(A) SEALED DRG NO. 04-749-130222-01.1E() DRG NO. 04-749-130222-01.1E C Non Established
26) BOOSTER CARTG. ASSY EMPTY DRG.NO. AFK/SK-014-03 FOR PSYCHOLOGICAL TRAINER () DRG.NO. AFK/SK-014-03 C Non Established
27) COMPONENTS OF FUZE YDB-60 (10 COMPONENTS)() AS PER DGNAI SPECIFICATION C Non Established
28) IGNITER CASING CQA(A) SEALED DRG NO 04-749-130222-03.1E() DRG NO 04-749-130222-03.1E C Non Established
29) PYROCARTRIDGE YDP 4-2 ASSEMBLY AS PER DRG. NO. NASK 1016() DRG. NO. NASK 1016 C Non Established
30) SRCR (EMPTY) (TYPE E, C & H) DRG NO. NASK 828/1() DRG NO. NASK 828/1 C Non Established
31) SWITCH NO. 4 PULL MK-1/L - EMPTY ASSEMBLY TO DRG. NO. DD(L) 15250() DRG. NO. DD(L) 15250 C Non Established
32) FUSE T & P 213 MK 5 (M-R) (EMPTY) TO DRG. NO. ARDE 2020 DET.1. SPECN. ARDE/SPECN/440 AND 441() ARDE/SPECN/440 AND 441 C Non Established
33) INNER CASE FOR PRIMER M 191 A2 DRG. NO. 04-44-79000-06103-3E() DRG. NO. 04-44-79000-06103-3E C Non Established
34) COMPONENTS FOR 40 MM MGL/UBGL AMMN. (1) CASE (2) BASE PLUG (3)INSERT (4)SKIRT (5) CUP() AS PER AFK SPECN. & DRG. C Established
35) 105 MM MEDIUM RANGE CHAFF ROCKET (MRCR) (EMPTY) TO DRG. NO. NASK 762 SHEET 1 OF 2 SHTS() DRG. NO. NASK 762 SHEET 1 OF 2 SHTS C Non Established
36) BODY FOR BOMB 51 MM MORT. HE 2A TO ARDE 1933 PT. NO. ITV 17SA SPECN. CQA(A) 2322() CQA(A) 2322 C Non Established
37) FUZE 40MM PIBD (EMPTY) FOR 40 MM AMMN. TO DRG. NO. ODC/ AFK-062-15 SPECN. AFK/SPECN. NO. 27() AFK/SPECN. NO. 27 C Non Established
Category : DDP,DP
Grade : I
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) DET NO 87 A) JUNC.CLIP & RET.STRIP[64]() Specification : DRG NO D D(L) 17434 PART IQX 996, DD(L) 17432 PART IQX 994 C Nonestab
2) INTERMEDIATE CASE DRG NO.KF/PJ/SK-2[60]() Specification : CQA[A] SEALED DRG NO 04-749-130222-02.1E C Nonestab
3) FRAGMENTATION SLEEVE FOR ROUND 40MM[60]() Specification : DRG. NO. AFK-SK 208/05 DT.07-10-2005. SHT.1 & 2 C Nonestab
4) A/S ROCKET RGB-12 PRACTICE (EMPTY)[60]() Specification : DRG. NO. NAI(V) 8200 (PROV) DT.11.11.2013 C Nonestab
5) A/S ROCKET RGB-60 EMPTY.[60]() Specification : DRG. NO. NASK 1061 (PROV) C Nonestab
6) BOMB 81MM HE MORTAR C EMPTY[60]() Specification : CQA (A) 2305 & L 8638-J C Nonestab
7) ADAPTER NOSE MOR BOMB NO.1 MK 1[60]() Specification : CQA(A) 2351 C Nonestab
8) SLUG FOR 14.5MM CASE AFK/PJ/SK-56[60]() Specification : AFK, DRG NO.AFK/PJ/SK-56 C Nonestab
Category : DDP,DP
Grade : I
Size :
1) Ammunition Factory Khadki
Name Specification Use Status
1) ADAPTER NOSE MORTAR BOMB NO 1 MK 1/L STEEL DES. REF NO. DD (L) 11855, PT NO TV 44 SPECN. CQA(A) 2351[60]() Specification : CQA(A) 2351 R Nonestab
Category : p
Grade : Grade III
Size :
1) Gun Carriage Factory
Name Specification Use Status
1) Catch Left () AS PER GCF /DRG/SPECN/IS/BS c Not Estab
2) Catch Right () AS PER GCF /DRG/SPECN/IS/BS c Not Estab
Category : DDP,DP
Grade : I
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) BLIND RIVET TO OFAJ DRG NO FS 3035[00]() Specification : BLIND RIVET TO OFAJ DRG NO. FS-3035 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6504300005 COIL CLOSED NOTCHED[65]() Specification : NOTCHED CLOSE COIL TO DRG. NO. 9102 00 01 00 01 002 0TB FOR 30 MM AGS-17 AMN. C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6504300006 RETAINER 9102 00 01 00 01 003 00TA[65]() Specification : RETAINER TO DRG NO. 9102 00 01 00 01 003 00TA FOR 30 MM GREN-ADE RUDRA AGS-17. C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6192355925 MAGAZINE ARDE 1146 DET NO 27[61]() Specification : MAGAZINE TO DRG. NO. ARDE-1146 DETAIL NO.27 AL. NO.312 DT.13.9.77 FOR ROCKET 68 MM HE. C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) SAFE and ARM DEVICE FOR ARTILLARY FUZE AS PER ODC MTPF DRG NO 770 13 21 00[00]() Specification : SAFE & ARM DEVICE (SAD) FOR ARTILLARY FUZE AS PER ODC/MTPF DRG NO. 770-13-21-00 C Nonestab
2) PIN GUIDE TO CQA A DRG NO 13143 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]() Specification : PIN GUIDE TO CQA (A) DRG. NO. 13143-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002) C Nonestab
3) PIN ROTOR LOCK TO CQA A DRG NO 13047 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]() Specification : PIN ROTOR LOCK TO CQA(A) DRG. NO. 13047-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002) C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) PIN AND HOUSING ASSEMBLY GRAZE SWITCH AS PER ODC MTPF DRG NO 740 22 32 00[00]() Specification : PIN & HOUSING ASSEMBLY (GRAZE SWITCH) AS PER ODC/MTPF DRG.NO.740-22-32-00 C Nonestab
2) BALL AND HOUSING ASSEMBLY IMPACT SWITCH AS PER ODC MTPF DRG NO 740 24 33 00[00]() Specification : BALL AND HOUSING ASSEMBLY (IMPACT SWITCH) AS PER ODC/MTPF DRG NO.740-24-33-00 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PRF FOR 30MM AK-630 PRACTICE NAVAL AMMN. (9911358280)() PLUG REPRESENTING FUZE (PRF) TO DRG.NO. NAI(J) 550/1/2 (P) FOR 30 MM AK-630 PRACTICE NAVAL AMMN. C NOT ESTABLISHED
2) ARMING DEVICE CASINIG ASSY FOR-551. (9911357821) () DRG NO.5209 556 C NOT ESTABLISHED
3) BALLISTIC CAP ASSEMBLY FOR 84MM HEAT-551 (9911357815)() BALLISTIC CAP ASSEMBLY TO DRG.NO. 5209 540 C NOT ESTABLISHED
4) BOOSTER CUP & PIN FOR 84MM HEAT-551 (9911358084)() BOOSTER CUP TO DRG.NO. TRD-2-2-2277 PIN TO DRG.NO. TRD-1-2-2278 C NOT ESTABLISHED
5) DIAPHRAGM TO DRG.NO.TRD-2-2-2244. (9911357863)() DRG.NO.TRD-2-2-2244 C NOT ESTABLISHED
6) LINER SCREW DRG.NO.TRD-1-2-2321(551) (9911357822)() LINER SCREW DRG.NO.TRD-1-2-2321./ LINER SCREW TO DRG.NO. 5209558 C NOT ESTABLISHED
7) LOCK WASHER JZE-2.55 (HEAT-551) (9911357867)() DRG NO.TRD-1-2-2269 C NOT ESTABLISHED
8) PARTITION TRD 1-2-2279 (84MM 551) (9911357819)() DRG NO.TRD 1-2-2279 C NOT ESTABLISHED
9) TAIL UNIT ASY 5216051 FOR HEAT-551 (9911357820)() TAIL UNIT ASY 5216051 FOR HEAT-551 C NOT ESTABLISHED
10) WARHEAD BODY ASSY. 3074 310 FOR 551. (9911357816)() WARHEAD BODY ASSEMBLY TO DRG NO.3074 310. C NOT ESTABLISHED
11) TRACER BODY DRG NO.F1334-154780-D (9911334357) () DRG NO.F-1334-154780-D, DC-36534-A DT.6/3/99 C NOT ESTABLISHED
12) STABILIZING TUBE F1301-026223-D (9911334347)() DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78. C NOT ESTABLISHED
13) ALUMINIUM DISC,THICK .05MM,DIA 10MM (9911357960)() ALUMINIUM(DISC) COVER THICKNESS= 0.05 MM ,DIA = 10MM.TO DRG. NO. F1334-154820 B DC-35529-A DT.14/08/93. C NOT ESTABLISHED
14) BODY ASSY-4-26941-060 FOR(81MM SMK) (9911355970)() BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87. C NOT ESTABLISHED
15) PLUG LAUNCHER PED 902-01-401 (9911356473)() DRG NO. 902-01-401 DC-17988-W DT. 20-06-1994. MATERIAL: ACRYLONITRILE BUTADIENE RUBBER COMPOUND TO SPECN.:-IND/ME/914(PROV) DC-3496-ME DT.06-02-98GRADE C OR D HARDNESS 55 TO 70. C NOT ESTABLISHED
16) SET 14 ITEMS WITH PERFORATED DISC (9911356669)() AS PER SPECIFIED DRGS. C NOT ESTABLISHED
17) ASSY OF S&A(EMPTY) COMPONENTS PFFC (9911357765)() AS PER SPECIFIED DRGS. C NOT ESTABLISHED
18) SAFETY LOCK ASSEMBLY (9911356455)() DRG.NO. bw 042-512-Cb DC NO. 34241-A DT. 24/9/87 C Non Established
Category : DDP,DP
Grade : II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PRF FOR 30MM AK-630 PRACTICE NAVAL AMMN. (9911358280)[99]() Specification : PLUG REPRESENTING FUZE (PRF) TO DRG.NO. NAI(J) 550/1/2 (P) FOR 30 MM AK-630 PRACTICE NAVAL AMMN. C Nonestab
2) TRACER BODY DRG NO.F1334-154780-D (9911334357) [99]() Specification : TRACER BODY TO DRG NO.F-1334-154780-D, DC-36534-A DT.6/3/99 C Nonestab
3) STABILIZING TUBE F1301-026223-D (9911334347)[99]() Specification : STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78. C Nonestab
4) ARMING DEVICE CASINIG ASSY FOR-551. (9911357821) [99]() Specification : DRG.NO.5209 556 C Nonestab
5) BOOSTER CUP & PIN FOR 84MM HEAT-551 (9911358084)[99]() Specification : BOOSTER CUP TO DRG.NO. TRD-2-2-2277 PIN TO DRG.NO. TRD-1-2-2278 C Nonestab
6) LINER SCREW DRG.NO.TRD-1-2-2321(551) (9911357822)[99]() Specification : LINER SCREW DRG.NO.TRD-1-2-2321./ LINER SCREW TO DRG.NO. 5209558 C Nonestab
7) LOCK WASHER JZE-2.55 (HEAT-551) (9911357867)[99]() Specification : DRG.NO.TRD-1-2-2269 C Nonestab
8) PARTITION TRD 1-2-2279 (84MM 551) (9911357819)[99]() Specification : PARTITION TO DRG.NO. TRD 1-2-2279 FOR 84MM HEAT-551. C Nonestab
9) TAIL UNIT ASY 5216051 FOR HEAT-551 (9911357820)[99]() Specification : TAIL UNIT ASY 5216051 FOR HEAT-551 C Nonestab
10) SET 14 ITEMS WITH PERFORATED DISC (9911356669)[99]() Specification : AS PER SPECIFIED DRGS. C Nonestab
11) ASSY OF S&A(EMPTY) COMPONENTS PFFC (9911357765)[99]() Specification : AS PER SPECIFIED DRGS. C Nonestab
12) BALLISTIC CAP ASSEMBLY FOR 84MM HEAT-551 (9911357815)[99]() Specification : BALLISTIC CAP ASSEMBLY TO DRG.NO. 5209 540 C Nonestab
13) DIAPHRAGM TO DRG.NO.TRD-2-2-2244. (9911357863)[99]() Specification : DRG.NO.TRD-2-2-2244 C Nonestab
14) WARHEAD BODY ASSY. 3074 310 FOR 551. (9911357816)[99]() Specification : WARHEAD BODY ASSEMBLY TO DRG NO.3074 310. C Nonestab
15) ALUMINIUM DISC,THICK .05MM,DIA 10MM (9911357960)[99]() Specification : ALUMINIUM(DISC) COVER THICKNESS= 0.05 MM ,DIA = 10MM.TO DRG. NO. F1334-154820 B DC-35529-A DT.14/08/93. C Nonestab
16) BODY ASSY-4-26941-060 FOR(81MM SMK) (9911355970)[99]() Specification : BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87. C Nonestab
17) PLUG LAUNCHER PED 902-01-401 (9911356473)[99]() Specification : DRG NO. 902-01-401 DC-17988-W DT. 20-06-1994. MATERIAL: ACRYLONITRILE BUTADIENE RUBBER COMPOUND TO SPECN.:-IND/ME/914(PROV) DC-3496-ME DT.06-02-98GRADE C OR D HARDNESS 55 TO 70. C Nonestab
18) SAFETY LOCK ASSEMBLY (9911356455)[99]() Specification : DRG.NO. bw 042-512-Cb DC NO. 34241-A DT. 24/9/87 C Nonestab
19) EMPTY FUZE B-25M TO DRG.TRD-1778 (9911357354)[99]() Specification : EMPTY ASSY.FUZE 25M TO DRG.NO TRD-1778a ( CONSISTING OF 37 ITEM ) REQD. FOR 140 MM ROCKET C Nonestab
20) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)[99]() Specification : TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED. C Estab
21) FUZE A670 M ASSY (EMPTY) EX-FD/LP (9911353080)[99]() Specification : NOSE FUZE GRADE A-670M ASSEMBLY (EMPTY) TO DRG NO.____3.140 -039____ DC(I)-34241-A DATE 24/9/87 PROGRAMME AND TEST PROCE-DURE AS PER ALBUM NO.D-2040, SHEET NO.____3.140.039____(12 SHEETS) DC-34241-A DTD 24/09/87. C Nonestab
22) CARBON NOZZLE BLANK FOR 84 HEAT-551 (9911357920)[99]() Specification : CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242. C Estab
23) SPIRAL DRG NO. 8.367.009 (9911350871)[99]() Specification : SPIRAL TO DRG.NO.---8.367.009 (2 SHEETS) SHEET NO.1 DC-37271-A DT. 08/11/10,SHEET NO.2 DC-35030-A DT 22-02-91. C Nonestab
24) AFT CLOSURE ASSEMBLY(F)-HEAT-551. (9911358049)[99]() Specification : AFT CLOSURE ASSEMBLY(FILLED)TO DRG.NO.6413210. C Nonestab
25) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)[61]() Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L). C Nonestab
26) PLUNGER BLANK FOR 84 HEAT-551 (9911357919)[99]() Specification : PLUNGER BLANK TO DRG NO.6417 888/DRG.NO.TRD-1-2-2293. C Nonestab
27) VALVE DRG NO.5209565 FOR 84HEAT-551 (9911357921 )[99]() Specification : VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247. C Estab
28) SUPPORTING RING TO DRG.NO.TRD222272 (9911357861)[99]() Specification : SUPPORTING RING TO DRG.NO.TRD-2-2-2272. C Nonestab
29) SWITCH NO.6 EMPTY ASSY.OF 8 COMPO. (9911358008)[99]() Specification : SWITCH NO.6 EMPTY ASSEMBLY OF 8 COMPONANTSDRG.NO.D.D(L)- 15270 D.C.NO.36836-A DT.14-6-02 EXCEPT SUB ASSEMBLY 2719.LIST OF 8 COMPONENT.(1) SAFETY PIN DESIG.REF.2718 DC NO.34267-A DT.13/11/87(2)STRIKER SPRING DESIG.REF.2735 DC No.34497-A dt C Nonestab
30) SLIDING RING TO DRG.NO.TRD-1-2-2264 (9911357851)[99]() Specification : SLIDING RING TO DRG.NO.TRD-1-2-2264. C Nonestab
31) SPACER TO DRG.NO.TRD-2-2-2273. (9911357855)[99]() Specification : SPACER TO DRG.NO.TRD-2-2-2273. C Nonestab
32) SPRING WASHER TO DRG.NO. TRD-1-22267 (9911357852)[99]() Specification : SPRING WASHER TO DRG.NO.TRD-1-2-2267. C Nonestab
33) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)[99]() Specification : MANTLE TO DRG.NO.TRD-2-2-2271. C Nonestab
34) AFT CLOSURE INSULATOR (HEAT-551) (9911357864)[99]() Specification : AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243. C Estab
35) BANGALORE TORPEDO SECT 38MM 2M EMPT (6430200100)[64]() Specification : BANGALORE TORPEDO,SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC(I)-35128-A DT 4/7/91 C Estab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]() Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF COMPENSATOR AS PER DRG NO K 1021 WITH FIRMSMATERIAL[70]() Specification : SUPPLY OF COMPENSATOR AS PER DRG NO K 1021 WITH FIRMSMATERIAL C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR[70]() Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT LEAVER PLATE TO DRG NO K 2071[70]() Specification : MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT LEAVER PLATE TO DRG NO K 2071 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF REAR SIGHT LEAF AS PER DRG NO K 2021STR WITH FIRMS MATERIAL[70]() Specification : ASUPPLY OF REAR SIGHT LEAF AS PER DRG NO K 2021STR WITH FIRMS MATERIAL C Nonestab
2) PREMACHINED BLANK FOR TAR TRUNNION K 4002STR2 COMPONENT AS PER DRG NO TEND 2616STR[70]() Specification : PREMACHINED BLANK FOR TAR TRUNNION K 4002STR2 COMPONENT AS PER DRG NO TEND 2616STR C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR R Nonestab
2) BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR R Nonestab
Category :
Grade : Grade III
Size : M
1) Gun and Shell Factory
Name Specification Use Status
1) GRENADE BODY BLANKS TO GSF DRG NO M 11220[62]() Specification : GRENADE BODY BLANKS TO GSF DRG. NO M-11220 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CARRIER AMMUNITION 16A FOR MORTAR BOMB 81MM ILLG. 2A() IA 1169 C
2) SET OF 8 COMPONENTS FOR SHELL 105MM IFG BE SMOKE() CQA(A) 4921 C
3) ADAPTER NOSE FOR MORTAR BOMB 81MM ILLG.2A() CQA(A) 2345 C
4) TAIL UNIT 8A WITH CAP FOR MORTAR BOMB 51MM SMOKE 2A() CQA(A) 2324 C
5) BODY UPPER FOR MORTAR BOMB 81MM ILLG 2A() CQA(A) 2345 C
6) UPPER SET FOR MORTAR BOMB 51MM ILLG.() CQA(A) 2328 C
7) LOWER SET FOR MORTAR BOMB 51MM ILLG.() CQA(A) 2328 & CQA(A) 2332 C
8) FUZE DA NO. 213 P T&P MK-5 (M-3) EMPTY FOR M.B. 81MM ILLG.2A() L-9974F (L) DRG. NO. ARDE 1967 PART NO. IQX67GE C Non Established
9) FUZE DA NO. 213 P T&P MK-5 (M-2) EMPTY FOR SHELL 105 MM ILLG / BE SMOKE / COLOUR SMOKE() L-9974F (L) DRG. NO. CIA/AMN/1763 PART NO. IQX 53 GE C Non Established
10) TUBE FOR PYRO (INDIA) HAND FLARE RED() DGOF/OFDR/004 DRG. NO. OFDR/CT/1/11/A3 C Non Established
11) NOSE CAP FOR M.B. 51MM SMOKE 2A() SPECN. NO. 2352(d) DRG. NO. ARDE 2082 DET. NO. 7 ITV-215 C Non Established
12) BODY PROJECTILE FOR RD. 14.5MM 3 SEC.() SPECN. NO. 04.749-0021-0012 DRG. NO. 04-749-130224 01.2E C Non Established
13) BODY PROJECTILE FOR RD. 14.5MM 6 SEC.() SPECN. NO. 04 OF 749-0021-0012 DRG. NO. 04-749-130226-01.2E C Non Established
14) DELAY CASING EMPTY 14.5MM 3 & 6 SEC.() SPECN. 04-749-0021-0008 DRG. NO. 04-749-130226-02.1E C Non Established
15) BODY & BOTTOM FOR FOG SIGNAL () DGOF/103 DRG. NO. OFDR/FOG SIGNAL/37/A1 AMDT NO.185 DT. 24/5/2011 C Non Established
16) BOMB BODY (EMPTY)FOR 120MM ILLG.() SPECN. NO. CQA (A) 2321 (b) DC-36952-A dt.16.03.2004 DRG NO. ARDE 2011 PT. NO. ITV - 12 SA DC (I) 33903 - A C Non Established
17) BODY LOWER FOR MORTAR BOMB 81MM ILLG. 2A() SPECN. NO. CQA(A) 2345(C) DRG. NO. ARDE 2222 DET 3 PT. NO. ITV 255 C Non Established
18) CUP HALF ASSY.() DRG. NO. ARDE 2222, PT NO. ITV 257 Sht-1 & Sht-2 C Non Established
19) INTERMEDIATE CASE 14.5MM 3 & 6 SEC() DRG.NO. 04-749-130224-011E, SPECN. 04-749-0021-0014.(USING IN 14.5,3SEC) C Non Established
20) CUP MOULDED WITH PINS & LID PINAKA() DRG NO.HEMRL/IGN/PINAKA/DRG 006 DET.NO.4,5,6 & 16. C Non Established
21) OUTER TUBE FOR PARA FLARE RED () DRG.NO. OFDR/CT/34M/ U-I/A4 C Non Established
22) VENTURY ASSEMBLY FOR PARA FLARE RED() DRG NO OFDR/CT/14/UI A3 (AMENDMENT NO.88 DT 9/5/98) C Non Established
23) BURSTER TUBE (STEEL) PARA FLARE RED() DRG.NO.OFDR/CT/19/UI/A-4(AMENDMENT NO.88 DT.9-5-98) C Non Established
24) DELAY UNIT (EMPTY) PARA FLARE RED() DRG NO OFDR/CT/22/U-I/A-4(AMENDMENT NO.88 DT 9.5.98) C Non Established
25) CONTAINER STAR FOR 81MM MK-II () DRG NO ARDE 1965 DET 12 PT NO ITV 122 SPECN:CQA(A) NO.2345(C) C Non Established
26) BASE PLATE FOR 81MM MK-II () DRG NO ARDE 1965 DET 13 PT NO ITV 123 SPECN CQA(A) 2345 (C) C Non Established
27) FERRULE (AL) FOR 81MM MK-II () DRG NO ARDE 1965 DET 21 PT NO ITV 131 C Non Established
28) BAFFLE PLATE FOR 81MM MK-II () DRG NO. ARDE 1965, DET 15, PT NO. ITV 125 C Non Established
29) SPRING HOLDER FOR 81MM MK-II () DRG NO ARDE 2222 DET 7 PT NO ITV 258, SPECN: NO. CQA(A) 2345(C) C Non Established
30) TAIL UNIT 11A FOR 81MM MK-II () DRG.NO ARDE 2222 DET 4 PT NO ITV 38A SPECN: CQA(A) 2346 (d) C Non Established
31) HALF CUP FOR BOMB 81 MM ILLG. MK-II() DRG NO.ARDE 2224 DET NO.5 PT NO. ISV 1930 C Non Established
32) BODY UPPER & BODY LOWER (FLASH 2A) () DRG NO ARDE 2285,DET NO.1 PART NO.ITV 276 & DET NO. 2, PART NO. ITV-277 C Non Established
33) EYE BOLT FOR 81MM() DRG.NO.ARDE 1965, DET 14, PT NO.ITV 124 C Non Established
34) BODY FOR 51 MM ILLUMINATING() DRG.NO.ARDE - 2064 (DET-1) PT.NO.ITV 220 SPECN.CQA(A) 2328 (d) C Non Established
35) LEAF SPRING, 51 ILLG. ITV 221. () DRG.NO. ARDE-2064 (DET NO 23)PT.NO. ITV 221 SPEC.NO. CQA(A) 2328 (d) C Non Established
36) FERRULE TO DRG.NO. ARDE 2064() DRG. ARDE-2064 (DET NO.21) PT NO. ITV 237 SPECN. CQA (A) 2328 (d) C Non Established
37) SET OF FIVE COMPONENTS UPPER SET OF 51MM ILLG. () DRG. NO. ARDE-2064 C Non Established
38) PARACHUTE HOUSING, 51 ILLG.() DRG.ARDE 2064 DET NO. 24 PT NO.ITV 240 SPECN. NO. CQA(A) 2328(d) C Non Established
39) DELAY TUBE FOR 51MM ILLG() DRG. ARDE 2064 (DET. 37) PART NO IQX 898 SPECN.CQA (A) 2328 (d) C Non Established
40) DISC FOR BOMB 51 MM PACKING() DRG NO OFDR/BOMB 51MM ILLG/SMK/114 C Non Established
41) CONTAINER () DRG.NO.ARDE 1935 DET 1 PART NO ITV 28A C Non Established
42) BODY EMPTY FOR 51 MM SMOKE () DRG.NO.CQA(A)/AMN/2935,DET 1 PT.NO.ITV273 SPEN.NO.CQA(A) 2352 (d) C Non Established
43) TAIL ADAPTER FOR 51 MM SMOKE () DRG.NO.CQA(A)/AMN/2935,DET NO.2 PT.NO.ITV-274 SPECN. NO.CQA(A)2352 (d) C Non Established
44) CONTAINER FOR 51 MM SMOKE () DRG.NO. CQA(A)/AMN/2935, DET NO.4 PT NO.ITV-275 SPECN. CQA(A) 2352 (d) C Non Established
45) BOTTOM PLATE WITH SWIVEL FOR 84 MM() DRG.NO.F-1301-054860 F SPECN.F 1301-903400 CLAUSE -3 & 6. C Non Established
46) TRANSIT PLUG FOR 84 MM ILLG.() DRG.NO.CIA/AMMN/2220 PT NO.ISX 318 MATERIAL TYPE I TO JSS:9330-O5 : 2012 (REV.NO.1) C Non Established
47) COVER FOR 84 MM ILLG.() DRG.NO.F-1301-047932-B SPECN.F-1301-903340 . C Non Established
48) SET OF 8 COMPONENTS FOR SHELL 105MM COLOR SMOKE ORANGE() CQA(A) 2346(c) C Non Established
49) SET OF 9 COMPONANTS FOR SHELL 105 MM IFG ILLG.2A() CQA(A) 4928 C Non Established
50) SHELL 105 MM IFG ILLG. 2A (EMPTY ASSY)() DRG.NO.ARDE 9769SHT NO 3 PT NO ISX 68 GE SPECN NO.CQA (A) 4928 DC 36684 -A C Non Established
51) DELAY HOLDER FOR 120MM ILLG.() DRG.NO. ARDE 2011 DET 11 PT NO.ITV 153 AND DRG.NO.ARDE 2011 DET 12 PT NO ITV 154 SPECN .NO CQA(A) 2321 (b) C Non Established
52) EYE BOLT FOR 120MM ILLG.() DRG.NO.OFDR/FT-464/A4 SPECN.NO.CQA(A) 2321 (b) C Non Established
53) FUZE T&P DA NO. 213-P MK-5 (M-4) (EMPTY) FOR 120MM ILLG () DRG.NO.ARDE2014 SHEET NO.2,PT.NO.IQX 68 GE SPECN.NO(L)9974-F(L) C Non Established
54) FERRULE FOR 120MM ILLG.() DRG. NO. ARDE 2097 PT NO ITV - 217 C Non Established
55) COVER EMPTY FOR FLARE TRIP WIRE MK1/L ITEM NO.9() DRG.NO.DD(L) 13461-A/1, SHEET NO.1 SPECN NO.CQA(A)3807 (d) C Non Established
56) SET OF 9 COMPONENTS FOR FLARE TRIP WIRE MK-1/L EMPTY() DRG. NO DD(L) 13461-A/1 SHEET I CONSISTING OF ITEM NO.1,2,3,4,5,8,13,14 AND 20.SPECN.NO CQA(A) 3807 (d) C Non Established
57) BODY FOR HAND FLARE RED () DRG. NO. OFDR/CT/1/3/M1/A3 LATEST AMENDMENTNO.93 DT.18/8/98. C Non Established
58) IGNITOR PERCUSSION (EMPTY) () DRG.NOS. NAD - 8611/14 TO 8611/24 C Non Established
59) IGNITER PERCUSSION (EMPTY) FOR DAY () DRG.NO.NAD-8611/20,21,22,& 33 C Non Established
60) SET OF COMPONENTS FOR SIGNAL DISTRESS DAY & NIGHT 1 MK IN 1() DRG.NOS.NAD - 8611/38, 40, 37, 39, 27, 29, 2 AND 36 C Non Established
61) EMPTY COMP.FOR BASE BLEED IGNITER() 1. PLUG IGNITR TO DRG.NO. 02676-300002A203 2. PROTECTIVE DISC.ASSEMBLY TO DRG.NO.02676-300001A203 C Non Established
62) SIGNAL FLARE (ASSY) FOR INDIAN NAVY() DRG.NO.NASK 864/1(PROV)CONSISTING OF1.UPPER BODY TO DRG.NO.NASK 864/1/2(PROV)2.LOWER BODY WITHFINS TO DRG.NO.NASK 864/1/3(PROV)3.PROPELLANT TUBE TO DRG.NONASK 864/7/1(PROV)4.NOSE CAP TO DRG.NO.NASK 864/1/1(PROV)5.STEEL WASHER TO DRG.NO.NASK 864/6 (PROV). C Non Established
63) SQUIB FOR SIGNAL FLARE () ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PROV) (iii) TERMINAL C Non Established
64) BODY ALUMINIUM FOR BOMB 3 KG PRACTICE() DRG.NO.ARDE-2155 Shts - 2, SHEET NO.2,AL NO.24/04 DATED 09/9/04 C Non Established
65) NOSE ASSY FOR BOMB 3 KG PRACTICE() DRG.NO.ARDE 2024/DET.1 CONSISTING OF :(1) NOSE TO DRG NO ARDE 2024 DET NO.2 (2) NOSE CAP-RING ASSY TO DRG NO ARDE 2024 DET NO.3 SHT.1 (3) TRIPOD SPRING TO DRG.NO ARDE 2024 DET NO.4(4) STRIKER TO DRG NO ARDE 2024 DET 5(5)MULTI-TOOTH LOCK WASHER B-6-4 TO IS C Non Established
66) BASE PLATE ASSY. FOR BOMB 3KG PRACTICE() DRG.NO.ARDE-2024 DET 10.AMENDED VIDE AL NO.650 DATED 16-3-90 CONSISTING OF-I)BASE PLATE TO DRG.NO.ARDE 2024 DET NO.11II)ADAPTER TO DRG.NO.ARDE 2024 DET NO.12AMMENDED VIDEAL650 DT.14.03.90. C Non Established
67) NUT FOR BOMB 3KG PRACTICE() DRG.NO.ARDE 2024/DET NO.16 C Non Established
68) SAFETY PIN ASSEMBLY() DRG.NO.ARDE 2024 DET NO 28 CONSISTING OF:(1)STRIP(2)PIN(3)FLAG RED(4)SAFETY SCREW(5)SPRING RING TODRG NOS(1)ARDE 2024/29,(2)ARDE 2024/30,(3)31 (SHTS2),(4)32,5)34 RESPECTIVELY WITH CIRCLIP LIGHT A75IS:3075/1975 Gd.10R2AND MULTITOOTH LOCK WASHER B6-4 IS : 5 C Non Established
69) FLARE GROUND INDICATING NO. 1 MK-1 YELLOW EMPTY SET() DRG.NO.ARM 1108 C-1 CONSISTING OF-1) BODY ARM 1108 C2 (2) SCREW NECK ARM 1108 B3 3) PLUG CAP ARM 1108 A5 (4) SCREW CAP ARM 1108 A4 5) BASE & SPIKE ARM 1108 A6. C Non Established
Category : DDP,DP
Grade : II
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SET OF HOLDER PRIMARY CHARGE & ADAPTER PRIMARY CHARGE FOR SHELL 155MM ILLG. M1A1[63]() Specification : DRG. NO. 2439A22010 & 2439A22011 C Nonestab
Category : ddp
Grade : Grade II
Size :
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CARTG. SQUIB OPERATED CUTTER R-4 [62]() Specification : DRG. NO. ARDE 2062 DET NO.1(EMPTY ASSY) & SPECN.NO.ARDE/SPECN/340 FORCING PIN ASSY. TO DRG.NO.ARDE-2062 DET.NO.07 AMENDED WIDE AL NO.18/2015.DC RCMA(AA)/1426/2 DT.10/08/15. C Nonestab
2) EMPTY CANISTER ASSEMBLY FOR M2A2[62]() Specification : EMPTY CANISTER ASSEMBLY FOR M2A2. 1)CANISTER WITH TUBE ASSY. DRG. NO. 2439A12002. QTY.:1NO.DC 36773-A DT.10-8-01 2) DISC CLOSSING DRG.NO.2439A30003.QTY.:1NO.DC 36773-A DT.10-8-01 3) SLEEVE DRG.NO.2439A12007.QTY.:1 NO.DC 36773-A DT C Nonestab
Category : DDP,DP
Grade : II
Size :
1) Ordnance Factory Bhandara
Name Specification Use Status
1) ALUMINIUM CONTAINER() Drg. No. OFBA/PETN/23 R
2) METALLIC CONTAINER for M4A2() Drg.No.13979-0-0 DC 35707 A DTD. 05.05.94 and SPEC NO. IA 1169(n) R
3) BOX C-27 A (TIN PLATE)() Drg. No.OFBA/NCP/209 DTD. 25.11.68 R
4) CYLINDER 443 MK1/L (TIN PLATE)() Drg .No. OFBA/CX/51dtd24.09.89 R
5) PZM NOZZLE Casting & Machining Left & Right () Drg No-ERDL-1040,Det-1,Det-2 C Non Established
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) ALUMINIUM CONTAINER[65]() Specification : Drg. No. OFBA/PETN/23 R Estab
2) METALLIC CONTAINER for M4A2[65]() Specification : Drg.No.13979-0-0 DC 35707 A DTD. 05.05.94 and SPEC NO. IA 1169(n) R Estab
3) BOX C-27 A (TIN PLATE)[65]() Specification : Drg. No.OFBA/NCP/209 DTD. 25.11.68 R Estab
4) CYLINDER 443 MK1/L (TIN PLATE)[65]() Specification : Drg .No. OFBA/CX/51dtd24.09.89 R Estab
5) PZM NOZZLE Casting & Machining Left & Right [65]() Specification : Drg No-ERD1040,Det-1,Det-2 R Estab
6) STD CASSETTE CONTAINER[42]() Specification : STD. CASSETTE CONTAINER FOR STD. ERA PANELS& TAPERED ERA PANELS, SPEC. HEMRL/MED/PS/288 (MATERIAL STEEL SHEET TO SPEC. HEMRL/MED/PS/288. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS : 277-92. HEMRL DRG. NO. 1457 DETL.8 R Nonestab
Category : DDP,DP
Grade : I,II
Size :
1) Ordnance Factory Bhandara
Name Specification Use Status
1) ALUMINIUM CONTAINER[65]() Specification : Drg. No. OFBA/PETN/23 R Nonestab
Category : DDP,DP
Grade : I,II
Size :
1) Ordnance Factory Bhandara
Name Specification Use Status
1) ALUMINIUM CONTAINER[65]() Specification : Drg. No. OFBA/PETN/23 R Estab
2) SPECIAL CASSETTE CONTAINER[42]() Specification : SPECIAL CASSETTE CONTAINER FOR SPECIAL ERA PANEL. SPEC. HEMRL/MED/PS/289. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS 277-92. HERML DRG. NO. 1460 DETL.8 R Estab
Category : DDP,DP
Grade : I,II
Size :
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOOSTER HOUSING PART NO 5229169 LF 9911358424[99]() Specification : BOOSTER HOUSING PART NO.5229169 TO OEM DRG.NO.304084449/ TRD.DRG.NO. 3.2.2653 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SIGHT ASSEMBLY AS PER DRG NO 36P 1300 WITH FIRMS MATERIAL FOR UBGL BULGARIA[70]() Specification : SIGHT ASSEMBLY AS PER DRG NO 36P 1300 WITH FIRMS MATERIAL FOR UBGL BULGARIA C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Itarsi
Name Specification Use Status
1) PACKAGE 155MM() DRG NO.4085561 WITH D.C.NO.35637-A TO ALL COMPONENTS AND CONNEC-TED DRAWINGS E Not Estab
Category : DP
Grade : II
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLUG WITH PAPER DISC.[14]() Specification : DRG.NO. AFK/SK-748-13 DT. 27.09.2013. C Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLUG WITH PAPER DISC.[14]() Specification : DRG.NO. AFK/SK-748-13 DT. 27.09.2013. C Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLUG REPRESENTING FUZE T AND P NASK 991[60]() Specification : DRG. NO. NASK 991 DT. 19-08-2013 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) COMPONENTS FOR CARTG. 40MM MGL AMN[60]() Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL[70]() Specification : BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) CAP KG 4 FOR A30 T DETONATOR[65]() Specification : CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10 C Nonestab
2) CUP YA 5 FOR A30 T DET[65]() Specification : CUP YA-5 FOR A30-T (DET) TO DRG.NO. FOR PRIMER A-30-T CQA(A)/AMN/2856DCNO.37271-A,DT.08.11.10 SCANNED ON DT.05.01.2011. C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SWITCH NO 5 EMPT WO SNOUT SWITCH LF 9911357321[99]() Specification : SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) PRIMER ELECTRIC NO N30MK1 EMPTY[62]() Specification : ERDL DRG 971, DET NO.1ARD NO-2374 DT.31.01.08 SPECIFICATION:ERDL/PYRO/PS-152(a) CONSISTING OF(01)BODY TO DRG NO.NAD 1589/1/1 ARD-2371 DT.24.07.07(QTY 01 NO.), (02) CONTACT BOLT: ERDL DRG 971 DET NO.3ARD-2403 DT.19.04.10(QTY-01 NO.),(03)PR C Nonestab
Category :
Grade : Grade III
Size : M
1) Gun and Shell Factory
Name Specification Use Status
1) SAFETY LOCK ASSY.() AS PER REQUIRED DRG. & SPECIFICATION C Nonestab
Category : DDP,DP
Grade : II
Size : M
1) Gun and Shell Factory
Name Specification Use Status
1) SAFETY LOCK ASSY.[69]() Specification : AS PER REQUIRED DRG. & SPECIFICATION C Nonestab
2) Link for AO-18/AK-630 Drg. no.3-AO-18.001. AS PER TECH. SPECN: NO. 3-AO-18.001-TY/NASK-835 (PROV.)[72]() Specification : AS PER DRAWING C Nonestab
3) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]() Specification : AS PER DRAWING C Nonestab
4) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION[70]() Specification : AS PER DRAWING C Nonestab
5) HOUSING LEVER SEAR TO DRG.NO.M-8201b(PB-8) FOR 0.32 " PISTOL[70]() Specification : DRG.NO.M-8201A(PB-8) FOR 0.32 " PISTOL C Nonestab
Category : p
Grade : Grade III
Size :
1) Gun and Shell Factory
Name Specification Use Status
1) SAFETY LOCK ASSY.[69]() Specification : AS PER REQUIRED DRG. & SPECIFICATION C Nonestab
2) BODY SUB ASSEMBLY TO SK NO.OTE/SE/010 INF/C[62]() Specification : AS PER DRG. & SPECIFICATION C Nonestab
3) FUNNEL TO DET NO 026 OF DRG NO 4 025998 WITHOUT SURFACE TREATEMENT[62]() Specification : FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT) C Nonestab
4) STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT[62]() Specification : STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT C Nonestab
5) Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15[62]() Specification : . Det. no 2-1 of Store Drg No 3-024045 (SK NO-OTF/DD/023) C Nonestab
Category : DDP,DP
Grade : II
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1, MCT-2396, MCT-2290.() As per required Specification C Not Estab.
Category : DP
Grade : II
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SCREW LOCKING HINGE PIN[70]() Specification : AS PER D.S.CAT.No.: 5305-018166, D.C.No.:24629-SA, DATED:02/02/2000 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR[70]() Specification : MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5[70]() Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) ADAPTER TUBE ASSEMBLY() ITV- 12 A C Estab.
2) TAIL UNIT-2A WITH ADAPTER() ITV-11A C Estab.
3) TUBE DELAY 4 SEC. & HOUSING WITH PIN OF GRENADE 36M() IQX- 943 C Estab.
4) FIRE TRANSMITING TUBE FOR 81 MM AMMN.() IRW- 115 C Estab.
5) EMPTY FUZE B- 429() 3-016919 C Estab.
6) FIN ASSEMBLY FOR 125 MM HE AMMUNITION() 4-024610 DET. NO.30 C Estab.
7) CONTAINER RK-33() 4-24929 INDEX NO.3 C Estab.
8) ANVIL FOR PRIMER GUV-7 FOR 125MM AMMN.() 3-020407 DET. NO. 3 C
9) BAFFLE FOR SHELL 155 MM SCREENING SMOKE BE ( M2 A2() 2439A -22005 C
10) CAP FOR PRIMER GUV-7 FOR 125 MM AMMN.() 3-020407 DET. NO. 3 C
11) FUZE PERCN. DA NO 117 EMPTY MK-20 WITH CAP() QX-244 GE C
12) FZ. PERCN. DA NO. 162 MK-8 (M-2)() IQX - 35 GE C
13) IGNITION TUBE FOR 120 MM HE() IRW - 92 C
14) PLUG REPRESENTING FZ. 117 MK-20 (STEEL)() ISX-475 C
15) PRIMER ELECTRIC 1A /L EMPTY() IQX- 46 GE C
16) PIN SHEARING FOR SHELL 155 MM SCREENING SMOKE BE M2A2() 2439-A 00009 C
17) CAPSULE ALUMINIUM FOR 155 MM AMMN.() 6338425 C
18) 6271134706 SHIM0.3MM FOR 130 MM CARGO() DRG. NO. 11-347-1070 C Established
Category : DDP
Grade : I
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) Ignition Tube for 120 mm HE[65]() Specification : IRW 92 C Nonestab
2) ADAPTER TUBE ASSEMBLY[65]() Specification : ITV 12 A C Nonestab
3) TAIL UNIT-2A WITH ADAPTER[65]() Specification : ITV-11A C Nonestab
4) FIN ASSEMBLY FOR 125 MM HE AMMUNITION[65]() Specification : DRG. NO.4-024610 DET. NO.30 C Nonestab
5) FUZE PERCN. DA NO 117 EMPTY MK-20 WITH CAP[65]() Specification : DRG. NO.CQA (A) QX 244 GE C Nonestab
6) EMPTY FUZE B- 429[65]() Specification : DRG. NO.CQA(A) 3-016919 C Nonestab
7) PRIMER ELECTRIC 1A /L EMPTY[65]() Specification : DRG. NO. CQA(A) IQX -46GE C Nonestab
8) TUBE DELAY 4 SEC. & HOUSING WITH PIN OF GRENADE 36M[65]() Specification : DRG. NO. IQX - 943 & IQX - 855A C Nonestab
9) CAPSULE ALUMINIUM FOR 155 MM AMMN.[65]() Specification : DRG. NO. 6387453 C Nonestab
10) CONTAINER RK-33[65]() Specification : DRG. NO. 4-24929 C Nonestab
11) FIRE TRANSMITING TUBE FOR 81 MM AMMN.[65]() Specification : IRW- 115 C Nonestab
12) ANVIL FOR PRIMER GUV-7 FOR 125MM AMMN.[65]() Specification : 3-020407 DET. NO. 3 C Nonestab
13) BAFFLE FOR SHELL 155 MM SCREENING SMOKE BE ( M2 A2[65]() Specification : 2439A -22005 C Nonestab
14) CAP FOR PRIMER GUV-7 FOR 125 MM AMMN.[65]() Specification : 3-020407 DET. NO. 3 C Nonestab
15) FZ. PERCN. DA NO. 162 MK-8 (M-2)[65]() Specification : IQX - 35 GE C Nonestab
16) PLUG REPRESENTING FZ. 117 MK-20 (STEEL)[65]() Specification : ISX-475 C Nonestab
17) PIN SHEARING FOR SHELL 155 MM SCREENING SMOKE BE M2A2[65]() Specification : 2439-A 00009 C Nonestab
18) 6271134706 SHIM0.3MM FOR 130 MM CARGO[65]() Specification : DRG. NO. 11-347-1070 C Nonestab
19) 6432300001 STD CASATTE CONT FOR STD ERA PANEL[64]() Specification : IS:277-92) HEMRL C Nonestab
20) 6432300002 CASETTE CONTAINER SPCL ERA PANEL[64]() Specification : HEMRL/MED/PS/289 (MATERIAL: GALVANIZED STEEL SHEET TO SPECN. NO.IS:277-92) HEMRL C Nonestab
21) 6141701300 WELL DETONATOR ITX 245 MINE AP1B DR[61]() Specification : WELL, DETONATOR FOR ASSLY. OF MINE AP 1B DIRECTIONAL C Nonestab
22) 6330604970 PLUG REPRESENTING FUZE B429[63]() Specification : PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A. C Nonestab
23) 6330604400 HOLDER DELAY FOR FZ B429[63]() Specification : DELAY HOLDER TO DRG. NO. 3-016919,53-B-025Y, DET.NO.40 DC-37284-A FOR FUZE B-429 C Nonestab
24) 6270600410 ADAPTER 2 013535 53 D FOR FZ B429[62]() Specification : ADAPTER TO DRG.NO.2-013535/53-OQ-482M,DET.NO.9,DC 36685-A FOR SHELL 130 MM. C Nonestab
25) 6044100058 PLUG REPRESENTING FZ 162A FOR 81MM[60]() Specification : PLUG REPRESENTING FUZE NO.162 A TO DRG. PART NO. ITV-17 FOR BOMB 81 MM MORTAR INERT-FUZED A, PLUGGED A, TO DRG. PART NO. ITV-7A C Nonestab
26) 6331800200 FUZE PERCN DA NO 162 MK-9(M-1)EMPTY[63]() Specification : SPECN.NO. CQA(A) 0917 C Nonestab
27) 6043000153 ADAPTOR TUBE ITV 13 A FOR 120MM PWP[60]() Specification : ADAPTER, TUBE, ASSY. TO DRG. PART NO. ITV 13-A DC NO. 36930-A FOR 120 MM PWP. C Nonestab
28) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]() Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008 C Nonestab
29) 6043100700 TAIL UNIT 1A FOR 81MM, ITV-8A[60]() Specification : SPECN NO. CQA(A) 2308(D) C Nonestab
30) 6044000140 BOMB 120 MM PWP EMPT BODY[60]() Specification : SPECN. NO. CQA(A) 2341 C Nonestab
31) 6044000146 BOMB 120 MM HE 1A EMPTY BODY.[60]() Specification : SPECN. NO. 2341 C Nonestab
32) 6380600100 PRIMER 18 A EMPTY[63]() Specification : PRIMER PERCUSSION 18A EMPTY TO DRG.PART NO.IQX-51 GE DC 36506-A DT.23/12/1998 WITH BODY AND MAGAZINE SEPARATELY. C Nonestab
33) 6043000210 BOMB BODY 81MM MOR C EMP ITV 9A[60]() Specification : CQA(A) 2305(M) C Nonestab
34) 6473200464 LINER EXPLODER CAVITY DRG.155-1070[64]() Specification : LINER,EXPLODER CAVITY TO CQA(A) DESIGNER'S REF. 155-1070 DC NO. 36792-A DT. 01/11/2001 I.E. ALUMINIUM LINER HAVING LENGTH 33.7 - 0.5 MM AS DIRECTED BY CQA(A)PUNE VIDE LETTER NO.QA3A332 DTD.02/12/2013 C Nonestab
35) 6078000600 CAP CONDUCTING COMP EMPTY 105MM TK SH[60]() Specification : CAP CONDUCTING COMPOSITION EMPTY DRG PART NO. QX-115 A DC.NO.36230-A DATED 29-01-97 SPEC NO. L 10155 A (B) DC NO. 31887-A DATED 12-03-76 C Nonestab
Category : DDP
Grade : I
Size :
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) DIAPHRAGM (NOZZLE PLATE) FOR RGB 60[12]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) DIAPHRAGM FOR RGB-60[12]() Specification : AS PER DRAWINGS C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) ASSY CONTACT FOR RGB-60[13]() Specification : AS DRAWING C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) HEAD ROCKET BODY PRE-MACHINED FOR RGB -60[03]() Specification : AS PER DRAWING. C Nonestab
Category :
Grade : Grade III
Size : S
1) High Explosive Factory
Name Specification Use Status
1) KEY AMMUNITION[10]() Specification : 19 B DESGN.REF NO. CIA/AMN/1373 PT.NO.IUX 96 A DC 33857-A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOOSTER CUP PART NO 4102996 LF 9911358399[99]() Specification : BOOSTER CUP PART NO.4102996 TO OEM DRG.NO.304075972/ TRD.DRG.NO. 3.2.2552 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING OF FORGED BODY FROM OFC DRG.NO.FORG.3150/1/B(PART. NO.001 & DRG.NO.4-025998)TO DRG.NO.M-11104(UPTO PRE-FINISHED STAGE BEFORE H.T.)FOR 125 MM.HEAT SHELL() AS PER DRG.& SPECIFICATION C NOT ESTAB.
Category : DDP,DP
Grade : I
Size : M
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING OF FORGED BODY FROM OFC DRG.NO.FORG.3150/1/B(PART. NO.001 & DRG.NO.4-025998)TO DRG.NO.M-11104(UPTO PRE-FINISHED STAGE BEFORE H.T.)FOR 125 MM.HEAT SHELL[91]() Specification : AS PER DRG.& SPECIFICATION R Nonestab
2) RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade I
Size :
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING OF FORGED BODY FROM OFC DRG.NO.FORG.3150/1/B(PART. NO.001 & DRG.NO.4-025998)TO DRG.NO.M-11104(UPTO PRE-FINISHED STAGE BEFORE H.T.)FOR 125 MM.HEAT SHELL[91]() Specification : AS PER DRG.& SPECIFICATION C Nonestab
2) Receiver (PB-1) to GSF Sketch No M-9218 for 0.32[70]() Specification : Store Drg No M-8194 C Nonestab
3) PROOF MACHINED BODY FOR 51 MM HE to DRG. NO: SK-8345/C[62]() Specification : DRG. NO. SK-8345/C C Nonestab
Category : p
Grade : Grade III
Size :
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330685102 ELECTRIC FUZE UNCHARGED EMPTY[63]() Specification : ELECTRIC FUZE UNCHARGED ( EMPTY) TO DRG NO. 3-027321 CD 8 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6192547763 PROTECTING COVER DRG NOS NASK 776 9 2 PROVISIONAL[61]() Specification : PROTECTING COVER DRG. NOS NASK 776/9/2 (PROVISIONAL) DT.26-11-19 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6141156250 TUBE DELAY(4 SECOND) PT.DRG.IQX 943[61]() Specification : TUBE DELAY (FOR 4 SECONDS) DRG.PT.NO. IQX-943,DC-37296-A DT.27.12.2011 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SEALING RING PART NO 6413420 LF 9911358427[99]() Specification : SEALING RING PART NO. 6413420 TO OEM DRG.NO.301079691/ TRD.DRG.NO. 1.2.2597 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PROJECTILE TPT FFV-65 W/O TRACER[99]() Specification : 84MM TPT PROJECTILE FFV-65 (W/O TRACER-56 D) TO DRG. NO F1301-047300 R DC NO. 36598-A DT 23/09/99. C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CARTG CLIP FOR 76 62 SRGM LF 9911357314[99]() Specification : CARTG. CLIP ASSY TO DRG.NO. TRD-2-1-1992. R Nonestab
Category :
Grade : Grade III
Size : M
1) Small Arms Factory
Name Specification Use Status
1) BAYONET MK I FOR JVPC[70]() Specification : BAYONET MK-I FOR JVPC 5.56X30MM DRG NO. 0204 04 02 00 00 000 00AA C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ARMING PYRO DELAY EMPTY TO DRG LF 9911358385 Description : ARMING PYRO DELAY EMPTY TO DRG LF 9911358385() Specification : ARMING PYRO DELAY EMPTY TO DRG.NO.Khs-2-2-0405(a) C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PYRO DELAY TUBE EMPTY LF 9911358384[99]() Specification : PYRO DELAY TUBE EMPTY TO DRG.NO.Khs-2-2-0406(a) C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Bolangir
Name Specification Use Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR 30MM BMP-II AMMN. () CQA(A) DRG. NO.bw.3.140.039.cb/c, DC-34241-A, DT.24.9.87 (IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST (PASSED PROOF). PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040, NO. Bw.3.140.039 II M/c (12 SHEETS) DC- C Not Estab.
Category : DDP,DP
Grade : I
Size : M
1) Ordnance Factory Bolangir
Name Specification Use Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR 30MM BMP-II AMMN.[63]() Specification : CQA(A) DRG.NO.BW.3.140.039.CB/C, DC-34241-A, DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040, SHEET NO.BW.3.140.039 II M/ R Nonestab
2) BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12[62]() Specification : BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12 [USING WITH BODY (ALTERNATIVE) TO DRG.NO.bW 8.035.085/C SHEET 3 & 4 DC NO.34640-A,DT-9.6.89]. REF:(1) BODY WITH ASSY. DRAWING bW 5.500.113 Cb/c DC(1)-3 R Nonestab
3) PRIMER PERCUSSION,Q.F CARTGS.18A (EMPTY)TO[63]() Specification : PRIMER PERCUSSION,Q.F CARTGS.18A (EMPTY)TO DRG.PART NO IQX-51GE,DC-36506-A,DT.23.12.98 WITH BODY AND MAGAZINE SEPARATELY (WITH OUT ASSEMBLED CONDITION) R Nonestab
4) KEY AMMUNITION 39A TO DRG PART NO. IUX 144A,DC NO.35916-A[61]() Specification : KEY AMMUNITION 39A TO DRG PART NO. IUX 144A,DC NO.35916-A,DT.21.02.95 TO SPECN.CQA(A) 1817(t) DC 37096-A,DT.06.03.2007. R Nonestab
5) ELECTRIC FUZE UNCHARGED TO DRG.NO: 3-027321-4B2-Cd-8, DCI.33760A, DT.04.06.1985[63]() Specification : ELECTRIC FUZE UNCHARGED TO DRG.NO: 3-027321-4B2-Cd-8, DCI.33760A, DT.04.06.1985. SPECIAL REQUIREMENT: RESISTANCE ACROSS THE POINTS OF Pt-Ir WIRE SHOULD BE 1.4 TO 1.8 OMHS. R Nonestab
6) PLUG REPRESENTING FUZE B 429B TO DRG.NO:CQA[63]() Specification : PLUG REPRESENTING FUZE B 429B TO DRG.NO:CQA (A)/AMN/1669 PART NO:ISX-266,DC NO-35494-A, DT. 29.04.93 R Nonestab
7) EXPLODER CASE 3 OZ 15 DR[62]() Specification : EXPLODER CASE (3 OZ-15 DR): EXPLODER CASE TO DRG. NO. ARM 1172 B2B DT. 15-05-86 R Nonestab
Category : DDP,DP
Grade : I
Size :
1) Ordnance Factory Khamaria
Name Specification Use Status
1) ADEN LINK MK I FOR 30MM ADEN AMMN LF 9911358157[99]() Specification : LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL E Nonestab
Category :
Grade : Grade III
Size : M
1) Rifle Factory Ishapur
Name Specification Use Status
1) BAYONET ASSEMBLY FOR GHAATAK[70]() Specification : BAYONET ASSEMBLY TO DRG NO. RFI SK NO. 10242 (CONSISTS OF DRG. NO. RFI SK NO. 10243 TO 10256, 10204 & 10258 TO 10265) FOR 7.62 X 39 MM ASSAULT RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Medak
Name Specification Use Status
1) COMPONENTS AND ASSEMBLIES FOR DEFENCE AEROSPACE AND OTHER ENGINEERING INDUSTRY() As per drawing C Estab
Category : DDP,DP
Grade : I
Size : M
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BLANK FOR AFT CLOSURE 751 LF 9911358748 Description : BLANK FOR AFT CLOSURE 751 LF 9911358748() Specification : BLANK FOR AFT CLOSURE 751 TO SPEC NO 00814599 MATERIAL EN-AW 7075 TO DRG NO.304200410 TO PART NO.4103408 R Nonestab
2) BLANK FOR PLUNGER FOR 751 LF 9911358749 Description : BLANK FOR PLUNGER FOR 751 LF 9911358749() Specification : BLANK FOR PLUNGER FOR 751 TO SPEC NO. 00814596 MATERIAL EN-AW 7075 TO DRG NO. 304101470 TO PART NO 06417888 R Nonestab
3) BLANK FOR CARBON NOZZAL LF 9911358750 Description : BLANK FOR CARBON NOZZAL LF 9911358750() Specification : BLANK FOR CARBON NOZZAL TO SPEC. NO. 00813350 MATERIAL MERSEN GRADE 2114 TO DRG. NO. 304066482 TO PART NO. 06413206 R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) VALVE PART NO 404038806 LF 9911358407 Description : VALVE PART NO 404038806 LF 9911358407() Specification : VALVE PART NO. 404038806 TO OEM DRG.NO.304074199 TRD.DRG.NO.3.2.2547 R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) AFT CLOSURE BLANK FOR HEAT 551 LF 9911357918 Description : AFT CLOSURE BLANK FOR HEAT 551 LF 9911357918() Specification : AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294. R Nonestab
Category : p
Grade : 3
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) Device for loading & unloading of Cartridge Belts Assy.() 6CH16CBCB C NOT ESTABLISHED
Category : P
Grade : I
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) RAKOVs LINK LOADING MACHINE ASSY 56 YUL 428A CBCB[62]() Specification : RAKOV'S LINK-LOADING MACHINE ASSY. TO DRG NO. 56-YUL-428A CBCB C Nonestab
Category : P
Grade : I
Size :
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING OF FORGED BODY FROM OFC DRG NO FORG 3150 1 C PART NO 001 DRG NO 4 025998 TO DRG NO M 11505A UP TO PRE FINISHED STAGE BEFORE HT FOR 125MM HEAT SHELL I C 914003380[91]() Specification : MACHINING OF FORGED BODY FROM OFC DRG. NO. FORG. 3150/1/C (PART NO. 001 & DRG. NO. 4-025998) TO DRG. NO. M-11505A (UP TO PRE-FINISHED STAGE BEFORE HT) FOR 125MM HEAT SHELL (I/C-914003380) R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SHUTTER SPRING TBRL LF NO 9911358297[99]() Specification : SHUTTER SPRING TO DRG. NO. TBRL/MMG-H/MK1/031/R1 C Estab
2) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528[99]() Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/ C Nonestab
3) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527[99]() Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/ MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2 C Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Khamaria
Name Specification Use Status
1) 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529[99]() Specification : R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Khamaria
Name Specification Use Status
1) 1st SET OF 4 ITEMS FOR MMHG LF NO 9911358524[99]() Specification : R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHUTTER PLATE TBRL LF NO 9911358300 Description : SHUTTER PLATE TBRL LF NO 9911358300() Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0 R Nonestab
2) 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529 Description : 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529() Specification : 6th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Steel Screw (Qty-2nos), TBRL/MMG-H/BO/01/R1 2.Adaptor Screw (Qty-2nos),TBRL/MMG--H/BO/05/R2 3.Quarter Pin, TBRL/MMG-H/BO/03/R0 R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SELF TAPPING SCREW DRG 121932 LF NO 9911357650[99]() Specification : SELF TAPPING SCREW TO DRG NO.TRD 121932 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki
Name Specification Use Status
1) BOLT AMMN NO1 MK1(COX GUN AMMN)[60]() Specification : ARDE / SPEC / 182 / 1976 - (PART-1) ( REVD JUL 97) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BOLT AMMN NO1 MK1(COX GUN AMMN)[60]() Specification : ARDE / SPEC / 182 / 1976 - (PART-1) ( REVD JUL 97) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BOLT AMMN NO1 MK1(COX GUN AMMN)[60]() Specification : ARDE / SPEC / 182 / 1976 - (PART-1) ( REVD JUL 97) C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PISTON FOR JVPC ALFA[70]() Specification : PISTON FOR JVPC ALFA. DIMENSION AND MATERIAL AS PER DRG. NO.0204 03 04 00 04 001 00DA C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Bolangir
Name Specification Use Status
1) CUP Y1 3[64]() Specification : 6410120650 CUP Y1-3 -[IGNITING PRIMER MG-8] TO DESIGNER REF NO. CQA (A)/AMN/2855.DC NO.37271-A DT.08.11.10 SCANNED DT. 05.01.2011 HEIGHT SHOULD BE FROM 1.30MM TO 1.40MM OUTSIDE DIAMETER SHOULD BE 2.35MMTO 2.38MM. NOTE: - EDGES SHOULD B C Nonestab
2) CAP K3 2[64]() Specification : 6410120620 CAP K3-2 [IGNITING PRIMER MG-8] TO DESIGNER REF. NO. CQA(A)/AMN/2854.DC NO.37271-A, DT.08.11.10 SCANNED ON DT.05.01.11. HEIGHT SHOULD BE FROM 3.05 MM TO 3.15 MM. NOTE:- EDGES SHOULD BE VERY SMOOTH, EQUAL HEIGHTED, NO CROWN & SH C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SRGM 76 62 MM PRIMER SUB ASSY EMPTY LF 9911358760[99]() Specification : SRGM 76/62 MM PRIMER SUB-ASSY.(EMPTY) CONSISTING FOLLOWING COMPONENTS/SUB ASSY. (1) PRIMER BODY TO DRG.NO. CNA(OF) SK 435/1 (2) ANVIL TO TO DRG.NO. CNA(OF) SK435/2 (3) CAP EMPTY TO DRG.NO. CNA(OF) SK 435/3 (4) Pb-Sn FOIL TO DRG.NO. CNA(OF C Nonestab
Category :
Grade : Grade III
Size : M
1) Gun and Shell Factory
Name Specification Use Status
1) SEMI MACHINED STAGE UP TO KNURLING OPERATION OF 30 MM HEI BODY FROM INPUT STEEL ROD 32MM ITEM CODE NO 0353405132 TO OUTPUT DRG NO M 11209C FOR 30 MM HEI BMP II STORE[91]() Specification : SEMI MACHINED STAGE (UP TO KNURLING OPERATION) OF 30 MM HE/I BODY FROM INPUT STEEL ROD 32MM (ITEM CODE NO:- 0353405132) TO OUTPUT DRG. NO M-11209C FOR 30 MM HE/I (BMP-II) STORE (I/C- 9140033922) C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6261109200 S D ARMING 6 1 E FOR 105MM TKSH[62]() Specification : SHUTTER DELAYED ARMING EMPTY NO 6/1 TO DRG.PT.NO.QX-178-A,DC-35465-A,ITEM LIST FOR QX-178-A DC 35465-A DT.4.3.93.SPECN : L-10360(C) DCI-31888-A. C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6191700201 ADM EMPTY ASSEMBLY FOR SAM GPRS TO DRG NO 17020010000100000D AS PER QAP NO ARDE SAM GP ADM 02 FOR SAM GPRS FOR GUIDED PINAKA[61]() Specification : QAP NO ARDE SAM GP ADM 02 FOR SAM GPRS FOR GUIDED PINAKA C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6141855521 FIRING DEVICE FOR MINE AP 1B DIR[61]() Specification : FIRING DEVICE, ANTI- PERSONNEL MINE 1B FOR MINE AP 1ADIRECTIONAL (T2/1345-000038) DRAWING NO. CQA(I)-393 &SPECIFICATION NO. CQA(I)-266 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) CLIP TO DRG NO TX 304 LF 6430101000 Description : CLIP TO DRG NO TX 304 LF 6430101000() Specification : CLIP TO DRG.PT.NO.TX-304 DC NO.35128-A DT 4/7/91. LOT SIZE - 525 NOS. R Nonestab
2) TRACER IGNITER SHELL NO 14MK6N LF 6442000110 Description : TRACER IGNITER SHELL NO 14MK6N LF 6442000110() Specification : TRACER & IGNITER SHELL NO.14 MK-6/N EMPTY TO DRG.NO.NAD-2011(2 SHEETS) SHEET NO.1 ARD NO.2427 DT.22-10-2012.SHEET NO.2 NO ARD-2260 DT 20/1/97 TO SPECN: DNAI-IN-L1(a) (TRACER SHELL BE MADE OF SSD-32 MATERIAL ONLY) R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PLUNGER TO DRG NO TRD 1 1 3147a L F 9911358303[99]() Specification : PLUNGER TO DRG.NO.TRD-1-1-3147 'a' C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN FOR FUZE FB 40 FOR 40 MM PFFC LF 9911358194[99]() Specification : SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0 C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) HOLDER[33]() Specification : SHEET METAL COMPONENT C Nonestab
Category :
Grade : Grade III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00[99]() Specification : SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00 C Nonestab
Category : dp
Grade : Grade II
Size : M
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) DISC MOD 1 FOR RGB 60[01]() Specification : as per enclosed specification R Nonestab
2) SOCKET FOR RGB 60[01]() Specification : as per enclosed specification C Nonestab
Category :
Grade : Grade III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) DETONATOR CONTACT ASSY TO DRG.NO.770-12-26-00[99]() Specification : DETONATOR CONTACT ASSY TO DRG.NO.770-12-26-00 C Nonestab
Category : dp
Grade : Grade II
Size : M
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) PIN AND HOUSING ASSY TO DRG NO 740-22-32-00[99]() Specification : PIN AND HOUSING ASSY TO DRG NO 740-22-32-00 GOLD PLATING TO SPEC IS:3266-1982 C Nonestab
Category : dp
Grade : Grade II
Size : M
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) DETONATOR CONTACT ASSY TO DRG.NO.770-12-26-00[99]() Specification : DETONATOR CONTACT ASSY TO DRG.NO.770-12-26-00 C Nonestab
2) BALL AND HOUSING ASSY[99]() Specification : BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249. C Nonestab
3) MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00[71]() Specification : MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00. C Nonestab
Category : dp
Grade : Grade II
Size : M
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) CONVERSION OF ALUMINIUM ALLOY 33 POINT 5[00]() Specification : CONVERSION OF ALUMINIUM ALLOY 33.5 +/- 0.3 MM DIA TO SPECN. RDE - 40 IN WP CONDITION IN RUNNING LENGTH OF 2 TO 3 MTRS INTO SEMI-FINISHED CONTAINER CARTRIDGE TO OFAJ DRG. NO. FS-2956 D R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SUPPORTRING RING PART NO 5211870 LF 9911358417[99]() Specification : SUPPORTING RING PART NO. 5211870 TO OEM DRG.NO.304094939/ TRD.DRG.NO 2.2.2371 R Nonestab
2) SHELL HEI EMPTY 30MM BMP II LF 9911358129[99]() Specification : BODY EMPTY WITH BAND ASSY TO DRG NO.bw5.500.009Cb/c 2 SHEETSSHEET-1 DC-37321-A DT 18-10-12 SHEET-2 DC- 34241-ADT.24/09/87 SPECN.PROGRAMME AND METHOD OF TESTING AS PERSHEET NO.5w5.500.112 M/C (5 SHEET) DC-34241-A DT.24-9-87. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CENTRAL TUBE WITH DISC[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.4 C Nonestab
2) DELAY ELEMENT FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.12 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) PROPELLANT CUP FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.16A C Nonestab
2) PROPELLANT CUP CLOSURE FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.18 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) DELAY TUBE EMPTY FOR DET 36M 7SEC LF 9911358772 Description : DELAY TUBE EMPTY FOR DET 36M 7SEC LF 9911358772() Specification : DELAY TUBE (EMPTY) TO DRG.IQX 922 DC 36852-A DT.23/09/2002 FOR DETONATOR 36M 7 SEC R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) MANTLE PART NO 5211891 LF 9911358398 Description : MANTLE PART NO 5211891 LF 9911358398() Specification : MANTLE PART NO.5211891 TO OEM DRG.NO.304101466/TRD.DRG.NO. 2.2.2401 R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) CONVERSION OF 125 MM FORGED SHELL[43]() Specification : CONVERSION OF 125 MM FORGED SHELL INTO SEMI-FINISHED SHELL AS PER DRG. NO SM – 1318 AND SCOPE OF WORK AS PER ANNEXURE A C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) HOUSING WITH PIN FINISHED FOR DET L F 9911358156 Description : HOUSING WITH PIN FINISHED FOR DET L F 9911358156() Specification : HOUSING WITH PIN DRG.PT NO.IQX-85 SA.DC 36709 A, DATE.08-09-2000. R Nonestab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PRE-MACHINED BLANK STAGE 2 FOR K 4001 AS PER DRG NO.TEND 2449*1 WITH OFT RAW MATERIAL[00]() Specification : AS PER DRG NO.TEND 2449*1 WITH OFT RAW MATERIAL C Nonestab
Category : p
Grade : Grade II
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG NO K 4110 WITH FIRM'S MATERIAL C Estab
Category : p
Grade : Grade II
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BAYONET K9030[70]() Specification : BAYONET K9030 C Nonestab
Category : p
Grade : Grade II
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL C Nonestab
2) BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR2[70]() Specification : AS PER DRG NO TEND 2383 STR 2 C Nonestab
3) GAS PORT BLOCK AS PER DRG NO K1205 STR WITH FIRMS MATERIAL[70]() Specification : GAS PORT BLOCK AS PER DRG NO K1205 STR WITH FIRMS MATERIAL C Nonestab
4) FIRING PIN AS PER DRG No K 2015 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL C Nonestab
5) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG NO K 2012[70]() Specification : AS PER DRG. NO. K 2012 C Nonestab
6) BULLET GUIDE AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Nonestab
Category : p
Grade : Grade II
Size : M
1) Rifle Factory Ishapur
Name Specification Use Status
1) PRE-MACHINED BARREL BLANK FOR 9MM AUTO PISTOL[70]() Specification : PRE-MACHINED BARREL BLANK TO RFI SK NO. 6409/A* ( DC/RFI/NO.02/01/09)(TP TO BE TESTED TO CONFIRM MECH.PROP.AT T-1 COND)MACROETCH TEST, NMIR TEST TO JSS:9510-06 & INCLUSION CONTENTTO IS:4163 AS PER CQA(SA) NOTE SHEET NO.1 COL.(A) OR (B) OF C Nonestab
2) TRIGGER (FINISH) FOR PISTOL AUTO 9MM 1A.[70]() Specification : TRIGGER(FINISH) TO DS.CAT NO 1005-003184 (DC-25575-SA) [MACROETCH TEST WILL BE AS PER COL.(D) OF SL.NO.1 OF CQA(SA)NOTE SHEET NO.1] FOR PISTOL AUTO 9MM 1A. C Nonestab
Category : p
Grade : Grade II
Size :
1) Rifle Factory Ishapur
Name Specification Use Status
1) MODIFIED LEVER CHANGE FOR 7.62MM ASSAULT RIFLE (GHAATAK) [70]() Specification : MODIFIED LEVER CHANGE TO DRG NO. AR/012/1-ALT/RFI FOR 7.62MM ASSAULT RIFLE (GHAATAK) C Nonestab
Category : p
Grade : Grade II
Size :
1) Rifle Factory Ishapur
Name Specification Use Status
1) BLANK FOR BARREL EXTENSION UP TO OPERATION STAGE V[79]() Specification : BLANK FOR BARREL EXTENSION UP TO OPERATION STAGE V FOR RIFLE 5.56MM INSAS C Nonestab
2) HAMMER FINISH FOR 5.56MM INSAS[79]() Specification : AS PER DRAWING R Nonestab
3) CARTRIDGE LIFT WITH PINS[70]() Specification : CARTRIDGE LIFT (WITH PINS) FOR 12 BORE MODIFIED PUMP ACTION GUN C Nonestab
4) PAWL HAMMER[79]() Specification : PAWL HAMMER FOR RIFLE 5.56MM INSAS (DS CAT NO-3040-003115) C Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Chanda
Name Specification Use Status
1) Sets of components consist of i Delay holder to drg no 3 016919 53 B 025 Det No 40 DC 37284 A Qty 01 nos ii Regulator Sleeve to drg No 3 016919 53 B 025Y Det No 42 Item Code 6330604401[62]() Specification : Sets of components consist of i Delay holder to drg no 3 016919 53 B 025 Det No 40 DC 37284 A Qty 01 nos ii Regulator Sleeve to drg No 3 016919 53 B 025Y Det No 42 Item Code 6330604401 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Housing Firing Mechanism to Drawing number 30P 3014 STAR required for 40mm MGL[70]() Specification : Housing Firing Mechanism to Drg. No. 30P 3014 STAR required for 40mm MGL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) ADAPTER BUSH FOR 81MM AT AL[62]() Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19 C Nonestab
2) BUSH FOR 81MM ATAL[62]() Specification : DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) MACHINING OF LUG 243[61]() Specification : AS PER DRAWING C Nonestab
Category : ddp
Grade : Grade I
Size : M
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) MACHINING OF LUG 243[61]() Specification : AS PER DRAWING C Nonestab
2) MACHINING OF TRACK LINK[61]() Specification : AS PER OFM SPECIFICATION C Nonestab
Category : ddp
Grade : Grade I
Size : M
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) MACHINING OF LUG 243[61]() Specification : AS PER DRAWING C Nonestab
2) MACHINING OF TRACK LINK[61]() Specification : AS PER OFM SPECIFICATION C Nonestab
3) TRACK GUIDE TO DRG NO 172 55 013 L F NO 6120100197[61]() Specification : AS PER OFM C Nonestab
4) SHOE TO DRG NO 219 35 216 6120100196[61]() Specification : AS PER OFM C Nonestab
Category : ddp
Grade : Grade I
Size : M
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHELL EMPTY APT 30MM BMP II lf 9911350550 Description : SHELL EMPTY APT 30MM BMP II lf 9911350550() Specification : BODY WITH BAND ASSY TO DRG NO.bW 5.500.113 Cb/c DC NO - 34183-A DT.28-7-87. SPECN: PROGRAMME AND TEST PROCEDUREAS PER SHEET NO.bW 5.500.113 M/C (9 SHEETS)DC-34183-ADATED 28-07-87 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1410052010 CUP AND CAP FOR FUZE B429E[14]() Specification : CUP & CAP FOR MAGAZINE TO DRG. NO. PROP/SK-443 FOR RECTIFICATION OF FUZE B-429E. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432200102 STL CUP WITH SEAL HESH 120MM ARJUN[64]() Specification : STEEL CUP WITH SEAL FOR HESH TO DRG.PART NO. IRW 30 SA. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6473200195 DISC ALUMINIUM TO DRG NO 6387457 DCI 36490 A[64]() Specification : DISC ALUMINIUM TO DRG.NO.6387457 DCI 36490 A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) EMPTY CUP FOR DET 100 MG[60]() Specification : DRG. NO AFK/SK-246-05 SHT. NO. 2 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817 Description : PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817() Specification : 81 MM PRIMER BODY TO DRG NO. IQX 861DC NO 36304-A DT. 03/07/97, SPECIFICATION OF MATERIAL, PROTECTIVE FINISH AND OTHER GENERAL REQUIREMENT TO THE COMPONENT AS PER SPECIFICATION MENTIONED IN DRG NO. IQX861DC NO 36304-A DT. 03/07/97 & 04/ R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BASE PLATE FOR 81MM ILLG.[62]() Specification : SPECN. CQA(A) 2345 (C) DRG. NO. ARDE 1965 DET 13 PT NO. ITV 123 C Nonestab
Category :
Grade : Grade III
Size : SS
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY UPPER FOR 81 MM ILLG. MK-II [62]() Specification : DRG. NO. ARDE 2222 DET 2 PT NO ITV 254 SPECN : CQA(A) 2345 (C) C Nonestab
Category :
Grade : Grade III
Size : SS
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SHELL 001 FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.4-26941 DET 001 C Nonestab
2) SHELL003 FOR 81MM SMOKE 3D6[62]() Specification : S PER DRAWING NO.4-26941 DET 040CB C Nonestab
3) RING IN TWO SHELL FOR 81MM SMOKE 3D6[62]() Specification : DRG. NO. 4-26941 008 C Nonestab
Category :
Grade : Grade III
Size : SS
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]() Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 R Estab
Category : ddp
Grade : Grade II
Size : M
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) MECH STRIKER ASSY. TO DRG NO. AFK/SK-620-09 FOR 40 MM MGL AMMN[00]() Specification : MECH STRIKER ASSY. TO DRG NO. AFK/SK-620-09 FOR 40 MM MGL AMMN C Estab
Category : ddp
Grade : Grade II
Size : M
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) CONVERSION OF BOAT TAIL FORGING[00]() Specification : CONVERSION OF BOAT TAIL FORGING (IN HEAT TREATED CONDITIO) AS PER REF. DRG. F-448 J (OR LATEST ISSUE) IN TO BOAT TAIL MACHINED TO CQA (A) DRG. NO. 155-1150 COMPLETE WITH ANODIZING & PAINTING. INPUT MATERIAL FOR CONVERSION WILL BE PROVIDED R Estab
Category : ddp
Grade : Grade II
Size : M
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) ROTOR SPRING TO CQA (AMMN) DRG. NO. 3-016919 DET.-14 DC(I)37284- A DT. 6.7.2011 (WIDTH OF STEEL STRIP TO BE RESTRICTED TO 3.00 - 0.15 MM)[00]() Specification : ROTOR SPRING TO CQA (AMMN) DRG. NO. 3-016919 DET.-14 DC(I)37284- A DT. 6.7.2011 (WIDTH OF STEEL STRIP TO BE RESTRICTEDTO 3.00 - 0.15 MM) C Estab
Category : ddp
Grade : Grade II
Size : M
1) Ordnance Factory Bhandara
Name Specification Use Status
1) CASSETTE FOR ERA T 90[42]() Specification : CASSETTE (TOP & BOTTOM) FOR ERA T-90; A SET OF CASSETTE CONSIST OF ONE NO. OF ERA CONTAINER AS PER DRG. NO. HEMRL/EDS/AERA/T-90 DRG/001/1 AND ONE NO. OF ERA LID AS PER DRG. NO. HEMRL/EDS/AERA/T-90/DRG/001/2 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) 6099999131 SET OF COMPONENTS FOR 30MM VOG 17M[60]() Specification : 6099999131 SET OF COMPONENTS FOR 30MM VOG-17M R Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki
Name Specification Use Status
1) 6381210301 SET OF COMPONENTS FOR PRIMER M191A2[63]() Specification : SET OF COMPONENTS FOR PRIMER M191 A2 CONSISTING OF PLUNGER, PLUNGER GUIDE, WASHER SEALING, IGNITION ELEMENT AND INNER CASE AS PER ATTACHED ANNEXURE "A" C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) LOCKING NUT TO CQA A DRG NO 3 016919 DET 55 DC 37284 A DT 06 07 2011[63]() Specification : LOCKING NUT TO CQA(A)”DRG NO. 3-016919 DET-55DC-37284-A DT.06.07.2011 C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CASE CANDLE ASSEMBLY FOR SHELL 155MM ILLG M1A1[63]() Specification : DRG NO. 2440A20008 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) 6011500100 CUP DETONATOR PART NO ITX 57[60]() Specification : CUP DETONATOR PART NO. ITX -57, FOR DET APM-16, DC 37221-A R Nonestab
Category :
Grade : Grade III
Size : S
1) Grey Iron Foundry

[ENR Registration]
Name Specification Use Status
1) Machining & Leake Proof Test of Hand Grenads Empty Bodies. Description : Machining & Leake Proof Test of Hand Grenads Empty Bodies.() Specification : Drg. No.ITW-63 C Estab
2) Machining of Lifting Plug. Description : Machining of Lifting Plug.() Specification : As per Drawings. C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) STABILIZER BLADE (FIN) FOR 125MM HE Description : STABILIZER BLADE (FIN) FOR 125MM HE() Specification : DRG.NO.4-024610,DET.NO.024 C Estab
2) MAGAZINE Description : MAGAZINE() Specification : As per OFDC Specification C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) STABILIZER BLADE (FIN) FOR 125MM HE Description : STABILIZER BLADE (FIN) FOR 125MM HE() Specification : DRG.NO.4-024610,DET.NO.024 C Estab
2) MAGAZINE Description : MAGAZINE() Specification : As per OFDC Specification C Estab
Category : dp
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BIPOD ASSEMBLY REQUIRED FOR LMG BELT FED[70]() Specification : BIPOD ASSEMBLY AS PER DRG.NO. 1804 01 08 00 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED C Nonestab
2) TRIGGER MECHANISM ASSEMBLY REQUIRED FOR LMG BELT FED[70]() Specification : TRIGGER MECHANISM ASSEMBLY AS PER DRG.NO. 1804 01 01 02 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BIPOD ASSEMBLY FOR GPMG MMG EXPORT[70]() Specification : BIPOD ASSEMBLY FOR GPMG 7.62X51MM/MMG(EXPORT) DRG. NO. SK-MMGU-6326 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF INPUT BLANK AS PER DRG NO TEND 2656 STAR2 WITH OFT MATERIAL FOR TAR BOLT K2011STAR3[70]() Specification : MANUFACTURING AND SUPPLY OF INPUT BLANK AS PER DRG NO TEND 2656 STAR2 WITH OFT MATERIAL FOR TAR BOLT K2011STAR3 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) TAIL UNIT 8A WITH CAP ARDE-1933 D-7() Specification : CQA(A) 2324 C Estab
2) CTD 81 MM MOR BOMB 3A EMPTY IRE 3GE() Specification : CQA (A) 2348 C Estab
3) CARTG.TRG FOR 81MM MOR.BOMB3B(EMPTY() Specification : CQA (A) 2348 C Estab
4) SRIR (EMPTY) (TYPE E, C & H) TO DRG.NO. NASK 990/1 (PROV)() Specification : DRG.NO. NASK 990/1 (PROV) DT. 07.09.2011 C Estab
5) BOOSTER CHARGE 130.02.016 M.EMPTY() Specification : DRG NO.NAI(V) 7001 (PROV) DT. 23.07.2004 EXCEPT. ITEM NO. 1 CASING TO DRG. NO. NAI - 7001/1 DT 23.07.2004 C Estab
6) DET NO 87 A) JUNC.CLIP & RET.STRIP() Specification : DRG NO D D(L) 17434 PART IQX 996, DD(L) 17432 PART IQX 994 C Estab
Category : p
Grade : 1
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) HOUSING TO DRG NO DS CAT NO 1005 001635 DC NO 27063 SA DT 03 05 17 WITH FIRMS MATERIAL[70]() Specification : HOUSING TO DRG NO DS CAT NO 1005 001635 DC NO 27063 SA DT 03 05 17 WITH FIRMS MATERIAL E Nonestab
Category :
Grade : Grade III
Size : M
862 v.s. chemical trading co.
123/113-A, Pratap Ganj Gadaranian Purwa Kanpur Uttar pradesh
PIN1 : 208012
Phone No. : 9415040767
GSTIN : 09AAAFV9816D2Z0 		AAAFV9816D

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ANIMAL GLUE FOR GENERAL WOOD WORKING PURPOSE(1003254003 ) Description : ANIMAL GLUE FOR GENERAL WOOD WORKING PURPOSE(1003254003 )() Specification : ANIMAL GLUE FOR GENERAL WOOD-WORKING PURPOSE TO SPECN:- IS-852:1994 (2nd REVISION) (REAFFIRMED 2004 ) WITH CHLORIDECONTENT 1% MAXIMUM. R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) Ether Solvent() Specn No-IS-336-1973 IInd Rev Reaffirmed-2002 Ammendment 1DC 3811-ME dtd05.05.2004 R Not Estb.
2) Lead Tube for CLC-2() Specn No-IS:404-1993 R Non Established
3) Lead Tube for CLC-3() Specn No-IS:404-1993 R Non Established
4) DILUTE NITRIC ACID() IND/ME/129 DC-3754 ME Dtd-12.12.2002 R Non Established
5) SULPHURIC ACID Minimum 98% Strength() IS:266:1993 Third Rev Reaffirmed-2003 ammed-1 R Non Established
6) QUICK LIME() Specn IS:1540Part-1-1980 IInd Rev Reaffirmed 2003 Gr-C R Non Established
7) CALCIUM CARBONATE() Specn JSS-1082 R Non Established
Category : S
Grade : II
Size : S
863 M/s MUNTAHA INDUSTRIES
PLOT NO 11 AND 12 INDUSTRIAL AREA RICHHAI JABALPUR Madhya Pradesh
PIN1 : 482010
Phone No. : 4035006
GSTIN : 23AAQFM7704D2ZC 		AAQFM7704D

Download 		1) Ordnance Factory Bhusawal
Name Specification Use Status
1) 9911842659 HANDLE AND HANDLE CLIP ASSY 1564[07]() Specification : DRG, NO.OFB/C/1564 E Nonestab
2) 9911842583 HINGE AS PER DRG NO OFB C 1410[07]() Specification : Drg.No. OFB/C/1410-A E Nonestab
3) 9911842192 CATCH AS PER DRG OFB C 1561[07]() Specification : CATCH AS PER DRG NO OFB/C/1561 & CQA PART NO. ISV-585A CORROSPONDING AHSP DRG NO.ISV-585A DC 35750 DATED 14/07/1994. E Nonestab
4) 9911846510 BOTTOM FRAME FOR CARRIER 13A[07]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
5) 9911846616 BODY BOTTOM ASSEMBLY FOR CARRIER 16A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
6) 9911846617 BODY TOP ASSEMBLY FOR CARRIER 16A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
7) 9911842887 BRACKET END SHEEL FOR BOX C 53A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
8) 9911842201 LINK FOR HANDLE[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Nonestab
9) 9911846247 BIGGER PACKING PIECE FOR BOX SM 171K[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Nonestab
10) 9911842882 CHANNEL FOR BOX C 53A[07]() Specification : AS PER DRG./SPECIFICATION C Nonestab
11) 9911847669 HINGE WITH HINGE PIN ASSY FOR BOX H2A[07]() Specification : HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067 E Nonestab
12) 9911842660 HANDLE HANDLE CLIP ASSY 1466A[07]() Specification : HANDLE & HANDLE CLIP ASSY/1466A R Nonestab
13) 9911846249 STAPLE FOR BOX SM 171 K[07]() Specification : STAPLE FOR BOX SM 171 K R Nonestab
14) 9911842877 BRACKET A 2 FOR BOX C 53A[99]() Specification : AS PER OFBH SPECIFICATION R Nonestab
15) 9911842878 BRACKET B 1 FOR BOX C 53A[99]() Specification : AS PER OFBH SPECIFICATION R Nonestab
16) 9911842879 BRACKET B 2 FOR BOX C 53A[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
17) 9911842876 BRACKET A1 FOR BOX C 53A[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
18) 9911842885 BOTTOM SUPPORT PIECE BOX C53A[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
19) 9911847060 SMALLER BRACKET FOR SM 651J[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
20) 9911843272 STRENGTHENING BAND CR LNK 1538[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
21) 9911843269 CARRYING LINK DRG OFB C 1540A[98]() Specification : AS PER OFBH SPECIFICATION R Nonestab
22) 9911847059 SUPPORTING BRACKET BOX SM 651[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
23) 9911847061 BIGGER BRACKET BOX SM 651 J[97]() Specification : AS PER OFBH SPECIFICATION C Nonestab
24) 911846511 TOP FRAME FOR CARRIER 13A[99]() Specification : AS PER OFBH SPECIFICAITON C Nonestab
25) 9911846588 BIGGER PACKING PIECE BOX 642C[99]() Specification : AS PER OFBH REQUIREMENT C Nonestab
26) 9911846333 CATCH AS PER DRG NO OFB C 1942[99]() Specification : AS PER OFBH REQUIREMENT C Nonestab
27) 9911846343 HANDLE FOR CARRIER 13A[99]() Specification : AS PER OFBH REQUIREMENT C Nonestab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Assy.Spacer Block-9051200000-V2() As per Specification/Drawings C Not Established
Category : P
Grade : III
Size : S
1) Grey Iron Foundry
Name Specification Use Status
1) Mig Welding of Casing for 100-120 Kgs Aerial Bomb() As per Drg.& Specification C Not Established
Category : DP
Grade : II
Size : S
1) Grey Iron Foundry
Name Specification Use Status
1) Tail Unit Assyembly for 100/120 Kgs.() As per Specification & Drg. C Not Established
Category : DP
Grade : III
Size : O
864 M.J.CHEMICALS
61 ASHOK CHAMBERS,56 DEVJI RATANSEY MARG MASJID (EAST) MUMBAI MAHARASHTRA
PIN1 : 400009
Phone No. : 022-66313135
GSTIN : 27AAAFM1884G1ZA 		AAAFM1884G

Download 		1) Ordnance Factory Bhandara
Name Specification Use Status
1) Di Butyl Phthalate() specn-IS:14421-1997 Reaffirmed 2003 with ammend No 1 of March2003 R NOT ESTB.
2) Glycerine for Nitration() Specn-JSS 6810-109-2007 Rev No2 DC 3904-ME Dtd-21.07.2008 R NOT ESTB.
Category : S
Grade : III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Acetone as per Russian Gost LF 1001010128 Description : Acetone as per Russian Gost LF 1001010128() Specification : Acetone as per Russian specification No. Gost 2768-84 grade-1 R Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) DI ETHYL PHTHALATE Description : DI ETHYL PHTHALATE() Specification : DIETHYL PHTHALATE CONFORMING TO SPECN IND/ME/873(A)(2015)- DC NO.6103-ME DATED 06.08.2019 R Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ACETONE LF 1001010103 Description : ACETONE LF 1001010103() Specification : IS 170-2004 (4TH REV.) R Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Plasticizer Ester type-1(DBP) Description : Plasticizer Ester type-1(DBP)() Specification : Specn-IS:14421-1997 Reaffirmed 2003 with ammend No 1 of March2003 R Estab
2) Acetone Description : Acetone() Specification : Specn IS/170-2004Fourt revi with purity percent by mass mini 99% R Estab
3) TOLUENE NITRATION GRADE Description : TOLUENE NITRATION GRADE() Specification : TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN. IS:537 OF 1967 (FIRST REVISION) REAFFIRMED 1991 WITH AMENDMENT 1 AND 2, DC-3807-ME DATED 05/05/2004 R Estab
Category : s
Grade : 3
Size : S
1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) DIETHYLPHTHLATE Description : DIETHYLPHTHLATE() Specification : DIETHYLPHTHALATE (SPECN : IND/ME/873(A): 2015 DC 5384-ME, DT.21.12.2015 ADDL.CLAUSE: COMPATIBILITY WITH NG, WHEN MIXED WITH NG THE DEP MUST NOT LOWER THE ABEL HEAT TEST OF NG. R Estab
2) ACETONE Description : ACETONE() Specification : ACETONE SPECN: IS 170-2004 (FOURTH REVISION) reaffirmed 2015 R Estab
3) CALCIUM CARBONATE Description : CALCIUM CARBONATE() Specification : CALCIUM CARBONATE FOR EXPLOSIVES TYPE II PRECIPITATED MATERIAL RETAINED ON 90 MICRON IS SIEVE - NIL (PERCENT BY MASS) FOR USE IN PROPELLANTS SPECN: IS 7633 - 1982 REAFFIRMED 2016. (FIRST REVISION) AMENDMENT NO. 1 DC 5372-ME DT.28-07-2015 R Estab
4) DIPHENYLAMINE DPA Description : DIPHENYLAMINE DPA() Specification : DIPHENYLAMINE SPECN: JSS-6810-129:2015 (REV NO:3)DC 5395 - ME DT. 01.02.2016 R Estab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Di-Phenyl Amine Description : Di-Phenyl Amine() Specification : DIPHENYLAMINE CONFORMING TO SPECIFICATION JSS 6810-129-2015 REVISION NO 3. R Estab
Category : ddp
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) AMYL ACETATE TECH.GR.IS-231-1957() Specification : IS-231-1957 REAFFIRMED 2006 WITH INCORPORATING AMENDMENT NO.1 R Estab
2) ETHYLENE GLYCOL MONOETHYL ETHER.() Specification : IND/ME/422 R Estab
3) RED LEAD(PB304) IS 8063-1976() Specification : IS:8063 -1976 WITH AMENDMENT NO, 1 R Estab
4) LENOLINE TO SPECN IND SL 2804 A() Specification : IND/SL/2804(A) DC 2094-SL R Estab
Category : p
Grade : 3
Size : S
865 VIKAMSHI FABRICS PVT.LTD
B-26-29, M.I.D.C. KHAMGAON BULDHANA MAHARASHTRA
PIN1 : 444303
Phone No. : 07269-277194
GSTIN : 27AAACV5494J1ZU 		NGPV02744A

Download 		1) Ordnance Factory Itarsi
Name Specification Use Status
1) RUBBERISED BAG(WATER PROOF) FOR AKASH BOOSTER() DRG.NO.HEMRL/SRP/AK/BST/07.01 AND AS PER ATTACHED SPECIFICATION E Estab
2) RUBBERISED BAG FOR SPC(5B-29) () AS PER DRG.NO.NAI(J) 1001 DT. 01 AUG 07 (SET OF SEVENTEEN DRAWINGS) INSPECTION-PINA(J) OR HIS AUTHORISED REP. E Estab
Category : DP
Grade : II
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) FABRIC RUBBER PROOFED DOUBLE TEXTURE ALUM. FINISH 100/104CM() IS: 4810-1968 R Established
2) FABRIC RUBBER PROOFED DOUBLE TEXTURE O.G 115CM.() IS: 6110 QUALITY-1 GRADE-A USING BASIC FABRIC CALICO COTTON R Established
3) FABRIC WATERPROOF RUBBERISED O.G. 91 CM() IS:5915 (LATEST) TYPE 2, QUALITY 1, GRADE-A. R Established
4) FABRIC RUBBERISED FOR TENT FLOORING 115 /117 WIDE (45/46")() IND/TC/2290 (b) R Established
5) FABRIC WATERPROOF RUBBERISED WHITE 91 CMS.() IS: 5915 (LATEST) TYPE 2, QUALITY 1, GRADE - A R
Category : P
Grade : II
Size : S
1) Ordnance Factory Itarsi
Name Specification Use Status
1) NEOPRENE RUBBER SHEET () AS FOLLOWING (1) TENSILE STRENGTH:4500 KN/SQ.MTR MIN.(2) ELONGATION:100% MIN.(3) THICKNESS:1.5 MM+0.5MM E Estab
Category : DP
Grade : III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) KK-600() CQAE/9320/1372/F R NOTESTAB
2) KK-200() CQAE/9320/1372/F R NOTESTAB
3) Hypolon Coated Poly Fab width 130 cm() As per specification R Established
4) Neoprene Coated Nylon Fabric 650 gm() As per specification R Established
5) Fabric Nylon Deep Orange Shade 591 width 100 cm() As per specification R Established
6) Poly Coated Nylon Fabric Strip Type B 50 mm & 20 mm KK-7() As per specification R Established
Category : P
Grade : III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) KK-200[21]() Specification : CQAE/9320/1372/( f ) R Estab
2) KK-600[21]() Specification : CQAE/9320/1372/( f ) R Estab
3) Hypolon Coated Poly Fab width 130 cm[21]() Specification : As per specification R Estab
4) Neoprene Coated Nylon Fabric 650 gm[21]() Specification : As per specification R Estab
5) Fabric Nylon Deep Orange Shade 591 width 100 cm[21]() Specification : As per specification R Estab
6) Poly Coated Nylon Fabric Strip Type B 50 mm & 20 mm KK-7[21]() Specification : As per specification R Estab
7) Main Buoyancy Fabric as per ISO 15372 2000 Class Type Approved[9911037662]() Specification : ISO 15372:2000 NCD 4006 Issue 3 Of Boat Gemini Craft R Nonestab
8) Baffle and Tapping Fabric as per ISO 15372 2000[9911037663]() Specification : ISO 15372:2000 NCD 4006 Issue 3 Of Boat Gemini Craft. R Nonestab
9) RUBBER BAND 13MM Width 150 MM Circumference for BP Jaguar[2103679554]() Specification : ADRDE/QMS/TGTE/T/2018/03 DATED 25.11.2018 R Nonestab
Category : P
Grade : III
Size :
866 ABSOLUTE ENGINEERING SOLUTIONS
PLOT NO.620, FIRST FLOOR, INDUSTRIAL AREA, PHASE-2, CHANDIGARH RAMDARBAR CHANDIGARH Chandigarh
PIN1 : 160002
Phone No. : 4182620
GSTIN : 04APLPA8043F1Z8 		APLPA8043F

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) PRESSING LF 7440206283[74]() Specification : PRESSING LF 7440206283 C Nonestab
2) LEVER LF 7440206864[74]() Specification : LEVER LF 7440206864 C Nonestab
Category :
Grade : Grade III
Size : S
867 S M PLASTICS
MOHTA NIKUNJ RAMDASPETH NAGPUR MAHARASHTRA
PIN1 : 440010
Phone No. : 0712-2442122
GSTIN : 27AAPPM9073Q1ZK 		AAPPM9073Q

Download 		1) Ordnance Factory Itarsi
Name Specification Use Status
1) RUBBERISED BAG FOR PRO.PINAKA() AS PER DRAWING NO.HEMRL/SRP/PIN/06/1, DET NO.3 AND SHEET "1[AMENDED] ENCLOSURE OF DRAWING NO.HEMRL/SRP/PIN/06/1(6PAGES) AND AS PER ANNEXRE "1"VIDE AU E Not Estab
Category : DP
Grade : III
Size : S
868 FIDUCIA INTERNATIONAL CORPORATION
G-411, Alpha 2 chandini road Greater noida Uttar Pradesh
PIN1 : 201308
Phone No. : 4297072
GSTIN : 09BLLPS4918N1Z6 		BLLPS4918N

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) PCB LF NO 9001110683[90]() Specification : P.C.B DRG.NO: BL7.102.504 Drg No.BL7102504 P.C.B:-SMOTP DOUBLE SIDED PTH PCB AS PER DRG.NO:BL7.102.504 AND SPCN.NO:OLF/MSD/PCB/01 ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 50 MICRO MTR C Nonestab
2) PCB LF NO 9001110812[90]() Specification : P.C.B. DRG. NO: BL7.103.829 Drg No.BL7103829 P.C.B:-SMOTP DOUBLE SIDED PTH PCB AS PER DRG.NO:BL7.103 829 AND SPCN.NO:OLF/MSD/PCB/01/MOD ON GLASS EPOXY BOARD OF THICK 1.5 MM AND COPPER FOIL THICKNESS 50 MICRO MTR. CONFORMING TO JSS- C Nonestab
Category :
Grade : Grade III
Size : S
869 Wimplast Limited
Survey No. 324/4 to 7, Swami Narayan Gurukul Road, Village Kachigam, Daman and Diu
PIN1 : 396210
Phone No. : 26863426
GSTIN : 25AAACW0420B1Z6 		MUMW02156A

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) CARRIER 11A ISV 468A FOR HE AND ILLU 6573810100[65]() Specification : CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIR C Nonestab
Category : p
Grade : Grade III
Size : L
1) Ordnance Factory Khamaria
Name Specification Use Status
1) carrier 12 A[65]() Specification : CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION F C Nonestab
Category : p
Grade : Grade III
Size : L
870 POPPYS KNITWEAR PRIVATE LIMITED
NO. 9, M.P. Nagar, First Street M.P. NAGAR, FIRST STREET TIRUPPUR, TAMILNADU, INDIA Tamilnadu
PIN1 : 641607
Phone No. : 2221144
GSTIN : 33AADFP4476C1ZH 		CMBP03514A

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) 9081000168 CASTING OF BRACKET DRG 6333961[90]() Specification : CASTING.OF BRACKET.TO DRG NO.6333961.CONFORMING THE DRG / NO 6333961.) C Nonestab
2) 9081000189 TRAIL SPADE DRG 3051623[90]() Specification : ST.CASTING OF TRAIL SPADE TO DRG.NO.GCF/50/39471(REF DRG NO. 3051623)(WEIGHT OF CASTING SHOULD NOT EXCEED 70 KG C Nonestab
3) 9081002934 BRACKET RP 971634 CASTING[90]() Specification : BRACKET - RP 971634, CASTING TO DRG. NO. RP200038 C Nonestab
4) 9081002935 FORK RP 971629 CASTING[90]() Specification : FORK - RP 971629 (CASTING). C Nonestab
Category :
Grade : Grade III
Size : M
1) Gun Carriage Factory
Name Specification Use Status
1) INVESTMENT CASTING OF LIST 5189617[90]() Specification : AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL C Nonestab
2) INVEST CAST OF SAFETY COVER 5177816[90]() Specification : INVEST.CAST.OF SAFETY COVER.5177816 C Nonestab
3) INVESTMENT CASTING OF ARM 6347405[90]() Specification : INVESTMENT CASTING OF ARM. 6347405. C Nonestab
4) INVEST CASTING OF FORK END 5169027[90]() Specification : INVEST.CASTING OF FORK-END.5169027 C Nonestab
5) INVEST CASTING OF HOUSING 5169029[90]() Specification : INVEST.CASTING OF HOUSING 5169029 C Nonestab
6) INV CASTING OF INDICATOR RM6350604[90]() Specification : INV.CASTING OF INDICATOR RM6350604 C Nonestab
7) INVESTMENT CAST MTLOF PLATE 5191786[90]() Specification : INVESTMENT CAST MTLOF PLATE 5191786 C Nonestab
8) INVESTMENT CASTING OF PLATE 5189621[90]() Specification : INVESTMENT CASTING OF PLATE.5189621 C Nonestab
9) PLATE INVESTMENT CASTING 5189620[90]() Specification : PLATE INVESTMENT CASTING 5189620 C Nonestab
10) PLATES INVESTMENT CASTING 5189619[90]() Specification : PLATES INVESTMENT CASTING 5189619 C Nonestab
11) HANDLE INVES CAST MATERIAL 5175978[90]() Specification : HANDLE INVES.CAST MATERIAL.5175978. C Nonestab
12) BRACKET INVESTMENT CASTING 4076964[90]() Specification : BRACKET INVESTMENT CASTING 4076964 C Nonestab
13) BARCKET INVESTMENT CAST MTL 4082382[90]() Specification : BARCKET INVESTMENT CAST MTL.4082382 C Nonestab
14) PLATE INVESTMENT CAST MTRL 4089370[90]() Specification : PLATE INVESTMENT CAST MTRL.4089370 C Nonestab
15) PLATE INVESTMENT CAST MTRL 4089371[90]() Specification : PLATE INVESTMENT CAST MTRL.4089371. C Nonestab
16) PLATE INVESTMENT CAST MTRL 5173820[90]() Specification : PLATE INVESTMENT CAST MTRL.5173820. C Nonestab
17) PLATE INVEST CAST MTRL 5189622[90]() Specification : PLATE INVEST.CAST. MTRL.5189622. C Nonestab
18) PLATE INVESTMENT CAST MTRL 4088730[90]() Specification : PLATE INVESTMENT CAST MTRL.4088730. C Nonestab
19) INVESTMENT CASTING OF EAR 6360693[90]() Specification : INVESTMENT CASTING OF EAR. 6360693. C Nonestab
20) INVESTMENT CASTING OF PLATE 5189623[90]() Specification : INVESTMENT CASTING OF PLATE.5189623 C Nonestab
Category :
Grade : Grade III
Size : M
871 MAHA HYDRAULICS PRIVATE LIMITED
F62 SIPCOT INDUSTRIAL COMPLEX 8th MAIN ROAD, 3rd CROSS STREET IRUNGATTUKOTTAI Tamil Nadu
PIN1 : 602117
Phone No. : 47193081
GSTIN : 33AACCM4090R1Z2 		CHEM05010F

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) CYLINDER NO 274 MK1 SER[65]() Specification : IA 1163 C Nonestab
2) CYLINDER FOR PACKING OF FUZE 3KM-EM[65]() Specification : DRG. NO.NAD 4704/1 C Nonestab
3) CYLINDER NO. 293 MK-3 AFK-SK-281-05[6575234000]() Specification : DRG.NO. AFK/SK-281-05 C Nonestab
4) CYLINDER NO 80 A MK[6575380000]() Specification : IA-1163 C Nonestab
5) CYLINDER NO 224 MK 5[6575520000]() Specification : DRG. NO. ARM 1478 A4 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CYLINDER NO 274 MK1 SER[65]() Specification : IA 1163 C Nonestab
2) CYLINDER FOR PACKING OF FUZE 3KM-EM[65]() Specification : DRG. NO.NAD 4704/1 C Nonestab
3) CYLINDER NO. 293 MK-3 AFK-SK-281-05[65]() Specification : DRG.NO. AFK/SK-281-05 C Nonestab
4) CYLINDER NO 80 A MK[65]() Specification : IA-1163 C Nonestab
5) CYLINDER NO 224 MK 5[65]() Specification : DRG. NO. ARM 1478 A4 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) IGNITER CASING DRG.NO.KF/PJ/SK/-5[60]() Specification : CQA(A) SEALED DRG NO 04-749-130222-03.1E C Nonestab
2) CARTG.CASE DRG ARDE/2165/2 ERU 204[60]() Specification : SPECN.ARDE/SPECN/423 C Nonestab
3) CASE CRTG ARDE/1508 PK16[60]() Specification : SPECN : ARDE/ SPECN/221 C Nonestab
4) SLEEVE W/O SERRATION FOR 40MM MGL[60]() Specification : DRG. NO. AFK/SK-214/05. DT. 27.01.2015 C Nonestab
5) COMPONENTS FOR CARTG. 40MM MGL AMN[60]() Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP C Nonestab
6) CASING AS PER DRG.NO.NAI(V)7001/1[60]() Specification : DRG NO:NAI(V) 7001/1 23/07/04. C Nonestab
Category :
Grade : Grade III
Size : S
872 K G Denim Limited
Jadayampalayam & Post Mettupalayam Thenthirumalai Coimbatore Tamil Nadu
PIN1 : 641302
Phone No. : 235430
GSTIN : 33AAACK7940C1ZW 		CMBK03032B

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Cloth Cotton Poplin Light Blue 150 cm width excluding selvedges[21]() Specification : NO.IS:188-2004 V.NO.2 R Nonestab
2) Cloth Polyester and Cotton Combination of Plain Weave and Modified Plain Weave Sage Green 150 cm width minimum excluding selvedges[21]() Specification : IAFS 09149 : 2016 with Amendment No.8 R Nonestab
3) CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CMS MINIMUM EXCLUDING SELVEDGES[21]() Specification : Specification No:PROV/OCFAV/FABRIC/005 R Nonestab
4) Cloth Mercerised Cotton Light OG 142 cms minimum width excluding selvedges[21]() Specification : NO.IND/TC/1201 R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) CLOTH DRILL COTTON NAVY BLUE 142 CMS V NO 4 MINIMUM EXCLUDING SELVEDGES NHQ[21]() Specification : SPECIFICATION : IS: 177-1989 (IVTH REVISION) REAFFIRMED 2014 CONFIRMING TO V. NO.4 R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Cloth Drill Cotton Khaki 142 CM Variety No 3 minimum width Excluding Selvedges[21]() Specification : Cloth Drill Cotton Khaki 142 CM Variety No 3 minimum width Excluding Selvedges SPECIFICATION NO.: VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2014. R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Cloth Drill Cotton Dark Grey 142 cms width minimum excluding selvedges[21]() Specification : NO.VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2014 R Nonestab
Category :
Grade : Grade III
Size : L
873 M. R. Weaving Mills Private Limited
Baba Chambers Industrial Estate Bhilwara Rajasthan
PIN1 : 311001
Phone No. : 9829038400
GSTIN : 08AABCM4955E1ZH 		JDHM04415F

Download 		1) Ordnance Clothing Factory Avadi

Debarred
Name Specification Use Status
1) cloth plain weave polyester and cotton grey 138 cm width minimum excluding selvedges[21]() Specification : IND/TC/0042 (F) R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi

Debarred
Name Specification Use Status
1) Cloth Drill Cotton Khaki 142 CM Variety No 3 minimum width Excluding Selvedges[21]() Specification : Cloth Drill Cotton Khaki 142 CM Variety No 3 minimum width Excluding Selvedges SPECIFICATION NO.: VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2014. R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi

Debarred
Name Specification Use Status
1) Cloth Cotton Poplin Light Blue 150 cm width excluding selvedges[21]() Specification : NO.IS:188-2004 V.NO.2 R Nonestab
2) Cloth Plain Weave Polyester and Viscose Dope Dyed Dark Blue Grey 148cms width minimum excluding selvedges[21]() Specification : No.IAFS 01053:2015 with Amendment No.1 R Nonestab
3) Cloth Polyester and Cotton Combination of Plain Weave and Modified Plain Weave Sage Green 150 cm width minimum excluding selvedges[21]() Specification : IAFS 09149 : 2016 with Amendment No.8 R Nonestab
4) Cloth Drill Cotton Greenish Khaki 142 cms minimum excluding selvedges[21]() Specification : NO.VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2014 R Nonestab
5) Cloth Mercerised Cotton Light OG 142 cms minimum width excluding selvedges[21]() Specification : NO.IND/TC/1201 R Nonestab
6) Cloth Plain Weave Polyester and Viscose Dope Dyed khaki 150 cm minimum width excluding selvedges[21]() Specification : NO.IND/TC/0048(g) R Nonestab
7) Cloth Polyester Filament Woven Dark Blue 150 cm width minimum width excluding selvedges[21]() Specification : CLOTH POLYESTER FILAMENT WOVEN DARK BLUE 150 CM WIDTH MINIMUM EXCLUDING SELVEDGES AS PER SPECIFICATION ATTACHED R Nonestab
8) Cloth Plain Weave Polyester and Viscose Dope Dyed Light Blue 148 cm width minimum excluding selvedges for Summer Uniform[21]() Specification : IAFS 01030 : 2015 with Amendment No.2 R Nonestab
9) Shirting Angola Drab Polywool 152 cm width minimum excluding selvedges[21]() Specification : IND/TC/4697 R Nonestab
10) Cloth Plain Weave Polyester and Cotton White 138 cms width minimum excluding selvedges[21]() Specification : No.IND/TC/0042 (f) R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi

Debarred
Name Specification Use Status
1) Cloth Drill Cotton Dark Grey 142 cms width minimum excluding selvedges SPECN VARIETY NO 3 OF IS 177 1989 FOURTH REVISION REAFFIRMED 2008[21]() Specification : Cloth Drill Cotton Dark Grey 142 cms width minimum excluding selvedges. SPECN.: VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2008. R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi

Debarred
Name Specification Use Status
1) CLOTH DRILL COTTON WHITE BLEACHED 142 CMS MINIMUM WIDTH EXCLUDING SELVEDGES[21]() Specification : VARIETY NO.3 OF IS:177:1989 (FOURTH REVISION) REAFFIRMED 2014 R Nonestab
2) CLOTH DRILL COTTON NAVY BLUE 142 CMS V NO 4 MINIMUM EXCLUDING SELVEDGES NHQ[21]() Specification : CLOTH DRILL COTTON NAVY BLUE 142 CMS (V.NO.4) MINIMUM EXCLUDING SELVEDGES (NHQ). SPECIFICATION : IS : 177 - 1989 (IVTH REVISION) REAFFIRMED 2014 CONFIRMING TO V. NO.4 R Nonestab
3) FABRIC 410 GMS WP PV DOPE DYED RIP STOP 148 CMS[21]() Specification : IND/TC/2562 R Nonestab
4) FABRIC GREEN 205 G SPUN PV DOPE DYED 148 CM MINIMUM[21]() Specification : PROV/S/4369/FABRIC GREEN PV/TC-11/2 (b) R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) SEWING THREAD SPUN POLYESTER OG[2101726605]() Specification : SPECN NO:IND/TC/0296(b)EXCEPT FORLENGTH/KG (min)(m)-12800, COUNT OF YARN 250 DTEX X3. BREAKING LOAD (MIN)-(50 CM. BETWEEN GRIPS)-23000 MN.FINAL TWIST IS Z PACKING & MARKING : AS PER SCHEDULE NO.CQAT&C/PMS/36(a) R Nonestab
Category :
Grade : Grade III
Size : M
874 SAFEX SAFETY & ENGINEERING
15/10, CIVIC CENTRE, NEAR VORA PETROL PUMP, JABALPUR MADHYA PRADESH
PIN1 : 482002
Phone No. : 0761-2757049, MOB:9424625546
GSTIN : 23ADDPJ6820F1ZZ 		ADDPJ6820F

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CARRIER AMMUNITION 16A FOR 81MM ILLG. MK-II() SPECN. NO. IA 1169(n) DC-35576-A DT. 8-9-93 DRG. NO. ARDE 2224 SHEET NO. 2 PT. NO. ISV 550A DC 36102-A DTD. 23.3.96 C Not Estab.
Category : P
Grade : II
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING[90]() Specification : CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020 R Nonestab
2) CUTTING OF 16MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING[90]() Specification : CUTTING OF 16MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020 R Nonestab
Category :
Grade : Grade III
Size : S
875 PANAMA PETROCHEM LTD.
PLOT NO. 3303, GIDC ESTATE, ANKLESHWAR MAHARASHTRA
PIN1 : 393002
Phone No. : 02646-221068
GSTIN : 24AACCP4358D1ZO 		MUMP21217A

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) MINERAL JELLY (DROP POINT 60 DEGREE CENTIGRATE MIN.)() SPECN. NO. JSS 8030-09 : 2002 R Estab.
2) WAX MICRO-CRYSTALLINE AMMUNITION O.N.G.C. TYPE() SPECN. NO. IND/ME/868 (A) (PROV) R Estab.
3) PARAFFIN LIQUID GRADE 1() SPECN NO JSS 9160-05 R Established
4) PARAFFIN WAX SPECIAL() SPECN NO JSS 9160-06 R Established
5) MINERAL JELLY DROP POINT 60 DEGREE CENTIGRADE MAXIMUM() SPECN NO JSS 8030-09 R Established
Category : DP
Grade : I
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) WAX PARAFFIN SPECIAL JSS-9160-06 (1020871017)[10]() Specification : PARAFFIN WAX SPECIAL TO SPECN:-JSS-9160-06 :2002 (REV.NO.2) (reaffirmed 2011) DC NO.-5047-ME.DT.15/12/2011 R Estab
2) MINERAL JELLY AMMN. (1034901003)[10]() Specification : SPECN:-JSS-8030-09 2010 (REV.2) DC NO.5011 -ME DT.14/2/11 R Estab
Category : p
Grade : Grade III
Size : L
876 VEM INDUSTRIAL CONTROL
S-4, INDUSTRIAL AREA, SITE -A, MATHURA INDUSTRIAL AREA , SITE A MATHURA Uttar Pradesh
PIN1 : 281004
Phone No. : 2490414
GSTIN : 09ABJPP4078M1ZW 		ABJPP4078M

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) CASTING OF FRONT BUSH 2A46M 109 40[90]() Specification : CASTING OF FRONT BUSH 2A46M 109 40 C Nonestab
2) 9081005701 SHAFT TO DRAWING NO 3054134[90]() Specification : SHAFT TO DRAWING NO.3054134 C Nonestab
3) 9081005812 AXLE TO PART NO 5160939[90]() Specification : AXLE TO PART NO.5160939 C Nonestab
4) 9081005813 SHAFT TO PART NO 5160940[90]() Specification : SHAFT TO PART NO.5160940 C Nonestab
5) 9081005814 AXLE TO PART NO 5160941[90]() Specification : AXLE TO PART NO.5160941 C Nonestab
6) 9081005815 AXLE TO PART NO 5162302[90]() Specification : AXLE TO PART NO.5162302 C Nonestab
7) 9081005823 AXLE TO PART NO 1132567[90]() Specification : AXLE TO PART NO.1132567 C Nonestab
8) 9081005824 AXLE TO PART NO 5141200[90]() Specification : AXLE TO PART NO.5141200. C Nonestab
9) 9081005838 AXLE TO PART NO 5141877[90]() Specification : AXLE TO PART NO.5141877 C Nonestab
10) 9081002978 BUFFER ASSY TO DRG 1133736 5163822[90]() Specification : BUFFER ASSY.TO DRG.1133736/5163822 C Nonestab
Category :
Grade : Grade III
Size : S
877 K L J PLASTICIZERS LTD
KLJ HOUSE, 63 RAMA MARG (NAJAFGARH), ROAD NEW DELHI DELHI
PIN1 : 110015
Phone No. : 011-25459706
GSTIN : 26AADCK4412E1ZZ 		AADCK4412E

Download 		1) Ordnance Factory Bhandara
Name Specification Use Status
1) Di Butyl Phthalate() Specn-IS:14421-1997 Reaffirmed 2003 with ammend No 1 of March2003 R ESTB.
2) PVC Brown() Specn-IND/ME/801-DC-3754-ME Dtd-12.12.2002, colour dark brown to isc 412 of IS-5:2004 V th Rev R ESTB.
3) DI Octyle Pthalate() Specn-MIL-STD-286-B (quoted from para 3 page no-1of HEMRL-specn HEMRL/BS/283 R Not Est.
4) Di Ethyl Phthalate () Specn-IND/ME/873(A)(Prov)-DC No 3754 ME Dtd-12.12.12 R Established
5) Di -2 Ethyl Hexyl sebacate Tech Grade() Specn (1) Relative Density AT 20 DEG.C.0.913 TO 0.919 G/CC2 R Established
Category : P
Grade : I
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) DI ETHYL PHTHALATE Description : DI ETHYL PHTHALATE() Specification : DIETHYL PHTHALATE CONFORMING TO SPECN IND/ME/873(A)(2015)- DC NO.6103-ME DATED 06.08.2019 R Estab
Category : ddp
Grade : 3
Size : S
878 SANAM INTERNATIONAL
89/190 BANSMANDI KANPUR BANTHAR UNNAO Uttar Pradesh
PIN1 : 209862
Phone No. : 2970142
GSTIN : 09AAVFS7779P1ZK 		AAVFS7779P

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) EYELETTED CLOSED UPPER FOR DERBY SHOE IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) Eyeletted Closed Upper with toe puff and counter stiffner for Electrical Safety Shoe in various sizes[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) OUTER COMPONENTS FOR GLOVES LEATHER WHITE LINED IN VARIOUS SIZES [21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) EYELETTED CLOSED UPPER FOR BOOT ANKLE DVS IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
2) EYELETTED CLOSED UPPER FOR HIGH ANKLE BOOT IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
3) EYELETTED CLOSED UPPER FOR ELECTRICAL SAFETY SHOE IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
4) LASTED CLOSED UPPER FOR BOOT ANKLE DVS IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
5) SHEEP/GOAT SKIN COMBINATION TANNED VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
6) EYELETTED CLOSED UPPER WITH TOE PUFF AND COUNTER STIFFNER FOR HIGH ANKLE BOOT IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
7) EYELETTED CLOSED UPPER WITH TOE PUFF AND COUNTER STIFFNER FOR BOOT ANKLE DVS IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
8) Eyeletted Closed Upper with stiffner for Derby Shoe in various sizes[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) SHEEP/GOAT SKIN CHROME TANNED WET BLUE (FOR GLOVING) various[21]() Specification : AS PER REQUIREMENT & SPECIFICTAION R Estab
2) LASTED CLOSED UPPER FOR DERBY SHOE IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
3) LASTED CLOSED UPPER FOR ELECTRICAL SAFETY SHOE IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
4) LASTED CLOSED UPPER FOR HIGH ANKLE BOOT IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
5) LASTED CLOSED UPPER FOR BOOT NAVY IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
6) LASTED CLOSED UPPER FOR SHOE OXFORD IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
7) LASTED CLOSED UPPER FOR BOOT PARATROOPERS IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
8) LASTED CLOSED UPPER FOR SAFETY SHOE IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
9) SHEEP/GOAT SKIN COMBINATION TANNED VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) LASTED UPPER OF VARIOUS SIZES FOR BOOT HIGH ANKLE DVS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) LEATHER LINING PLAIN NATURAL COMBINATION TANNED (WIHOUT PIGMENT FINISH)[21]() Specification : IS-3840-1996 TYPE-1 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) BUFF. VEGETABLE INSOLE FOR BOOT DVS IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) LEATHER LINING BLACK COMBINATION TANNED DRY MILLED[21]() Specification : As per requirement & specification R Estab
Category :
Grade : Grade III
Size : S
879 AJIT TECHNOPLAST PVT. LTD
103-A, CO-OPERATIVE INDUSTRIAL ESTATE, DADA NAGAR KANPUR UTTAR PRADESH
PIN1 : 208022
Phone No. : 0512-2295793, 0933506526
GSTIN : 09AABCP1869Q1ZO 		KNPA01453E

Download 		1) Field Gun Factory Kanpur
Name Specification Use Status
1) GRIP SUB ASSEMBLY RIGHT & LEFT FOR MK-III & NIRBHEEK() AS PER SPECIFICATION/REQUIREMENT C Estab.
2) REVOLVER GRIP() AS PER SPECIFICATION/REQUIREMENT C Estab.
3) REVOLVER BOX() AS PER SPECIFICATION/REQUIREMENT C Estab.
4) PLASTIC MOULDED COMPONENTS UPTO 2KG() AS PER SPECIFICATION/REQUIREMENT C Estab.
Category : DP
Grade : II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CARRIER 12A ISV-470A ASY B FOR TPT (6573800100)() CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG.PT. NO. ISV-470-A DC-36999-A DT. 02/02/05 WITH SHOCK ABSORBER ASSEMBLY B DRG.PT.NO. ISV-147-SA DC-35855-A DT. 23/11/94 SPECN: CQA(A)-2804 (m) DC-36202-A DT. 07/11/96 C NOT ESTABLISHED
2) CARRIER 11A ISV-468A FOR HE & ILLU. (6573810100)() CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-A DT 7/11/96 C Non Established
3) CONTAINER PLASTIC NO. P-17 FOR PPLT (9911356689)() CONTAINER NO P-17 (EMPTY ASSY) TO DRG NO. TRD-2-1-2079 ONE CONTAINER WITH FOLLOWING ITEMS:-1. DISC TOP & BOTTOM SIZE 74MM X 10MM THICK EXPENDED POLYTHENE FOAM TO DENSITY 25 TO 30 Kg PER METER SQUARE - 02 NO. 2. DISC SIZE 74MM X 0.08MM THICK COPPER FOIL TO C Non Established
4) BOX 520:9 EMPTY ASSY DRG TRD 222169 (9911357802)() BOX 520:9 EMPTY ASSEMBLY TO DRG NO.TRD-222169. C Non Established
5) CONTAINER PLASTIC P-17D (23MM PPL) (9911356890)() PLASTIC CONTAINER P-17D (EMPTY ASSY) DRG NO. TRD-1676 b WITH ONE NO EACH OF THE FOLLOWING PACKING FITMENTS:- (a) THERMOCOL DISC BOTTOM TO DRG NO KhFQ-110639 ( b) THERMOCOL DISC TOP TO DRG NO KhFQ-110640 (c) POLYTHENE SLEEVE TO DRG NO. KhFQ-110644 (d) LAB C Non Established
6) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)() MANTLE TO DRG.NO.TRD-2-2-2271 C Non Established
7) TWIN CONTAINER 520.9 DRG.NO. TRD-422155 (9911357801)() TWIN CONTAINER 520.9 TO DRG NO.02032398/DRG NO.TRD-422155 C Non Established
Category : P
Grade : II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CARRIER 11A ISV 468A FOR HE AND ILLU 6573810100[65]() Specification : CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIR E Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BUFFER BODY FOR PLATE BACK ASSY[70]() Specification : BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) 9.PIN CATCH BUFFER BODY [70]() Specification : DS CAT NO. 5315-001531 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PIN LOCATING CATCH BUFFER BODY TO DS CAT NO. 5315-004851 DC(I) NO. 25370-SA DT- 22.5.02 IN FINISHED CONDITION.[70]() Specification : PIN LOCATING CATCH BUFFER BODY TO DS CAT NO. 5315-004851 DC(I) NO. 25370-SA DT- 22.5.02 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PLUNGER SPRING CATCH BUFFER BODY FOR MAG[70]() Specification : DS CAT NO. 1005-000577 DC(I) NO. 27011-SA DT. 14.01.17 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) COVER GUN MUZZLE[70]() Specification : COVER GUN MUZZLE TO DRG NO. CQA (SA) SK-974 DC(I) NO. 26578-SA DT. 04.03.11 IN FINISHED CONDITION (IN BLACK COLOUR). DS CAT NO.1005 - 560751 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BUFFER BODY FOR PLATE BACK ASSY[70]() Specification : BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15 C Nonestab
2) PLUNGER SPRING CATCH BUFFER BODY TO DS CAT NO. 1005-000577 DC(I) NO. 25310-SA DT- 30.03.2002 IN FINISHED CONDITION.[70]() Specification : PLUNGER SPRING CATCH BUFFER BODY TO DS CAT NO. 1005-000577 DC(I) NO. 25310-SA DT- 30.03.2002 IN FINISHED CONDITION. C Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Grip Handle Left and Right For FIRING DEVICE[70]() Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125 C Nonestab
2) MUZZLE CAP MOULDING[70]() Specification : MUZZLE CAP MOULDING DRG. NO. 0204 04 04 00 00 000 00AA C Nonestab
3) Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA[7012670010]() Specification : Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA C Nonestab
4) Lower Hand Guard Assembly for CQB 5 56x45 MM[7012670011]() Specification : Lower Hand Guard Assembly for CQB 5 56x45 MM DRG No 1901 01 01 00 06 000 00DA C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) AMMUNITION CONTAINER 47 B, DES. REF CIA/AMN/2483, PT. NO. ISV 515 A SPECN. NO CQA(A) 2804[65]() Specification : CQA(A) 2804 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BOX PLASTIC DRG NO AFK/SK-2224[14]() Specification : DRG NO. 04-44-79000-06130-3 C Nonestab
2) PLASTIC BOX FOR .22RF CARTGS.[65]() Specification : DRG. NO. AFK/SK 586-09 SHT. 1 C Nonestab
3) COLLAR NOSE TO DRG. NO. ARDE 2233 DET. NO. 1 PT. NO. ISV 1942[60]() Specification : DRG NO ARDE 2233 DET NO.1 PART NO ISV 1942 C Nonestab
4) NYLON RING-DRG PT NO ITV 50[60]() Specification : DESIGN REF. CIA/AMN/1579 PART NO. ITV-50 C Nonestab
5) BASE CAP (BLACK) FOR PROJECTILE[60]() Specification : DRG. NO. AFK/PJ/SK-62/1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CARRIER 6A/L,STEEL,TO DESIGNER'S REF CIA/AMN/1162,PART NO.ISV 354-A,SPECN IA 1169 DULY PAINTED AS PER DRG WITH PAINT OF SHADE OLIVE GREEN ISC:220[65]() Specification : IA 1169 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ANTISTATIC PLASTIC BOX POLY PROPYLENE COPOLYMER PPCP WITH ANTISTATIC GRAIN FOR PACKING OF CARTRIDGE S A 9 MM BALL[65]() Specification : DRAWING NO AFK/PROV-51 DTD.12.10.2016 & 15.05.2017 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLASTIC INDEX DISC FOR CARTG. SA 12 BORE 65/70 MM TO DRG. NO. AFK/SK-2888 DT. 17/01/2007[60]() Specification : DRG. NO. AFK/SK-2888 DT. 17/01/2007 C Nonestab
2) PLASTIC MOULDED ITEMS FROM 5 GRAMS TO 5.5 KILOGRAMS[60]() Specification : AS PER AHSP/ AFK SPECIFICATION C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) STEEL INSERT FOR BULLET FOR CARTG. 5.56MM X 30MM (MSMC) AS PER ARDE DRG.NO.0204-02-01-01-01-00-00DB[60]() Specification : ARDE DRG.NO.0204-02-01-01-01-00-00DB C Nonestab
2) STEEL INSERT. FOR 6.8MM BULLET AS PER DRG. NO. 085 01 00 01 01 001 00D (ARDE DRG.)[60]() Specification : DRG. NO. 085 01 00 01 01 001 00D (ARDE DRG.) C Nonestab
3) STEEL INSERT (MRN) FOR BULLET FOR CARTG. 5.56MM X 30MM, (R-31) MSMC (MRN) AS PER DRG. NO. - 0204-02-00-00-003-00XA[60]() Specification : DRG. NO. - 0204-02-00-00-003-00XA C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLUG REPRESENTING FUZE FOR 40MM LOW[60]() Specification : PLUG REPRESENTING FUZE FOR 40MM LOW VELOCITY AMMN. TO DRG. NO. ODC/AFK-120-18 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) TRIMMED PLASTIC TUBE[21]() Specification : DRG NO AFK/SK-564-08 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) TRI PLASTIC TUBE FOR SA 12 BORE 70M[21]() Specification : DRG. NO. AFK/SK-563-08 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BODY FOR PRIMER M 191A2 TO CQA (A) DRG. NO. 04-44-79000-06110-3E[60]() Specification : CQA (A) DRG. NO. 04-44-79000-06111-4E C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ADAPTER NOSE MOR BOMB NO.1 MK 1[60]() Specification : CQA(A) 2351 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FIRE TRANSMITTING TUBE TO DRAWING NO CIA AMN 900 PT NO IRW 115[60]() Specification : DRG. NO. CIA/AMN/900 PT. NO. IRW 115 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CONTAINER PLASTIC NO.P-17 FOR PPLT[99]() Specification : CONTAINER NO P-17 (EMPTY ASSY) TO DRG NO. TRD-2-1-2079 ONE CONTAINER WITH FOLLOWING ITEMS:-1.DISC TOP & BOTTOM SIZE 74MM X 10MM THICK EXPENDED POLYTHE- NE FOAM TO DENSITY 25 TO 30 Kg PER METER SQUARE - 02 NO.2.DISC SIZE 74MM X 0.08MM THIC P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CONTAINER PLASTIC P-17D (23MM PPL)[99]() Specification : PLASTIC CONTAINER P-17D (EMPTY ASSY) DRG NO. TRD-1676 b WITHONE NO EACH OF THE FOLLOWING PACKING FITMENTS:-(a) THERMOCOL DISC BOTTOM TO DRG NO KhFQ-110639 (b) THERMOCOL DISC TOP TO DRG NO KhFQ-110640 (c) POLYTHENE SLEEVE TO DRG NO. KhFQ-1 P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SLIPPING RING PART NO 5212095 LF 9911358418[99]() Specification : SLIPPING RING PART NO.5212095 TO OEM DRG.NO.304101480/ TRD.DRG.NO. 2.2.2408 C Nonestab
2) 84MM TPT TWIN CONTAINER PART1202502 LF 9911358478[99]() Specification : 84MM TWIN CONTAINER/ROUND PART NO.1202502. P Nonestab
3) TWIN CONTAINER 520 9 PART 1202503 LF 9911358476[99]() Specification : TWIN CONTAINER 520:82/ROUND PART NO.1202503 TO OEM DRG.NO. 04110302/TRD DRG.NO.3.2.2568. P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CONTAINER PLASTIC NO P 17 FOR PUFF LF 9911353558[99]() Specification : CONTAINER NO.P-17(EMPTY ASSY)TO DRG NO.ARDE 1910/1 ASSEMBLEDWITH (I) BODY TO DRG. NO.TRD-1282'b' (II) LID TO DRG.NO.TRD-1283'b'AND (III)RING TO DRG.NO.TRD-1284 'a'. P Nonestab
2) CONTAINER POLY NOP 17A FOR ERU AJI LF 9911353656[99]() Specification : CONTAINER POLYTHENE NO.P-17-A SHEET 3 (METHOD OF PKG)DRG. NOTRD-1293.A.CONTAINER P-17A EMPTY ASSY.OF DRG.NO.TRD - 1281 (a) 1.BODY TO DRG.NO.TRD - 1282 (b) 2.LID TO DRG.NO.TRD - 1283 (b) 3.RING TO DRG.NO.TRD - 1284 (a)B.SLEEVE TO DRG.NO.TR P Nonestab
3) CONTAINER P 17C DRG NO ARDE 1892 LF 9911358229[99]() Specification : CONTAINER P-17C TO DRAWING NO.-ARDE 1892 R.NO.1 DT.20-11-95.(1)CONTAINER P-17C(EMPTY ASSY)-ARDE/1910/1 R.NO.2 DT.30-7-97(2)SLEEVE - ARDE/1892/1 (3).DISC - ARDE/1892/2(4)WASHER - ARDE/1892/3(5)PIECE PACKING TOP - ARDE/1892/4 (6).LABLE - AR P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SET OF CARRIER 4A L and CARRIER 5A L LF 9911358263 Description : SET OF CARRIER 4A L and CARRIER 5A L LF 9911358263() Specification : SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIE P Nonestab
2) CONTAINER FOR PP3 DRG NO AAIW 1147 LF 9911358188 Description : CONTAINER FOR PP3 DRG NO AAIW 1147 LF 9911358188() Specification : CONTAINER TO DRG.NO.AAIW-1147 (8 SHEET) FOR PACKING OF CARTG.PP-3. P Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG NO K 4011 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO.K-4011 WITH FIRMS MATERIAL. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL[70]() Specification : LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) UPPER HAND GUARD ASSY AS PER DRG No.K-2050 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No.K-2050 WITH FIRMS MATERIAL E Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BUTT (PLASTIC) (DARK BLUE) FOR RIFLE 5.56MM INSAS.[70]() Specification : BUTT(PLASTIC),(D/BLUE) TO DS CAT NO.1005-560838(DC-26635-S) SPECN.NO.ARDE/SPECN/536(PROV). FOR RIFLE 5.56MM INSAS. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) GRIP PISTOL ASSY. FOR 7.62 MM ASSAULT RIFLE (GHAATAK). AS PER DRG.NO.AKC-11,CONSIST OF:- 1)AKC-11/1P 2)AKC-11/2P (COLOUR- BLACK).[70]() Specification : GRIP PISTOL ASSY. FOR 7.62 MM ASSAULT RIFLE (GHAATAK). AS PER DRG.NO.AKC-11,CONSIST OF:- 1)AKC-11/1P 2)AKC-11/2P (COLOUR- BLACK). C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) PLATE BUTT[70]() Specification : PLATE BUTT TO DRG.NO.TSP-408(DC/RFI/NO.08C/030/08)FOR "30-06"SPORTING RIFLE R Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) POLYMAR MAGAZINE ASSEMBLY FOR GHAATAK[70]() Specification : POLYMER MAGAZINE ASSY.DRG.NO.RFISK.9923AR FOR 7.62MM ASSAULT RIFLE GHAATAK C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) PLATE BUTT FOR TEAR GAS GUN[70]() Specification : AS PER DRAWING C Nonestab
2) BUTT FOR TEAR GAS GUN[70]() Specification : BUTT .FOR TEAR GAS GUN C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) PLASTIC PALLET FOR 303 ANTI RIOT GUN[10]() Specification : PLASTIC PALLET FOR 0.303 ANTI RIOT GUN C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) PLATE BUTT FOR 30-06 SPR (DRG.NO. TSP-408)[70]() Specification : PLATE BUTT FOR 30-06 SPR (DRG.NO. TSP-408) C Nonestab
2) PLATE BUTT END TO DRG.NO. TSP-410 (DC/RFI/08C/096/10)FOR 30-06 SPORTING RIFLE[70]() Specification : As per drawing. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BUTT PLATE FOR 12 BORE MODIFIED PUMP ACTION GUN[70]() Specification : BUTT PLATE FOR 12 BORE MODIFIED PUMP ACTION GUN C Nonestab
2) STOCK BUTT FOR 12 BORE MODIFIED PUMP ACTION GUN[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLASTIC POWER PISTON W O POUCH 65MM[21]() Specification : AFK DRG.NO. KF/SK-1809 C Nonestab
2) PLASTIC POWER PISTON FOR 70 MM 12 BORE[60]() Specification : DRG. NO KF/SK-1747 DATED 04/03/2000 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030[70]() Specification : Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) IMPROVED SPACE HEATING DEVICE BUKHARI FOR COLD CONDITIONS[21]() Specification : DIPAS/Specifications/Improved SHD (BUKHARI)/3/2017 E Estab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLASTIC BOX FOR .22RF CARTGS.[65]() Specification : DRG. NO. AFK/SK 586-09 SHT. 1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) TRANSIT PLUG AS PER SK NO M 7949[62]() Specification : AS PER DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) PLASTIC STOPPER OG[21]() Specification : PLASTIC STOPPER OG SPECIFICATION :- AS PER SCHEDULE NO. DMSRDE/LE-2/94(2) MENTIONED IN SPECIFICATION NO. JSS 4240-03-2011 R Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Butt Assembly for CQB DRG No1901 01 01 00 07 000 00DC[70]() Specification : Butt Assembly for CQB DRG No.1901 01 01 00 07 000 00DC. C Nonestab
2) Connector lower body for CQB 5 56[70]() Specification : Connector lower body for CQB 5.56x45 mm DRG. No. 1901 01 02 00 00 007 00DC. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) GUARD HAND ASSY. (UPPER) (STEEL STRIP) FOR RIFLE 5.56MM INSAS.[70]() Specification : GUARD HAND ASSY.(UPPER)(STEEL STRIP)[FOR DARK BLUE GRAY COL.TO DS CAT NO.1005-560046 (DC-26533-SA). CONSISTING OF:- 1)1005-560047(DC-25638-SA) 2)1005-560832(DC-26635-SA) & 3)5320-022259(DC-26504-SA),(2-NOS.) FOR RIFLE 5.56MM INSAS. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambernath
Name Specification Use Status
1) TRANSPARENT TRANSIT PLUG FOR IFG CC[14]() Specification : SPECN.JSS-9330-03-2014 REVISION NO.3, L.D.PE. GRADE, TYPE 2. C Estab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CARRIER AMMUNITION 10 C , DESIGNER'S REF CIA/AMN/2317 PART NO.ISV 495A,SPECN CQA(A)2804[65]() Specification : CQA(A)2804 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) HALF CUP B DES REF NO CIA/AMN/851 DRG PT.NO. ISV 862 AID MEMOIRES NO H/3/3.[60]() Specification : DES REF NO CIA/AMN/851 DRG PT.NO. ISV 862 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) AMMUNITION CONTAINER 69 A/L PLASTIC TO DRG NO ARDE 2125,DET NO 3, PART NO ISV 533 A, SPECN NO CQA(A)2804[65]() Specification : CQA(A)2804 C Nonestab
2) CONTAINER 38B TO DESGN REF NO. CIA/AMN/2008 CONSISTING OF: 1. BODY 2. LID 3. RING A & DISC TO DESGN REF NO.CQA(A)/AMN/3042 DET 2&3 SLEEVE-A & SLEEVE-B TO DRG. NO. CQA(A)/AMN/2543 SHT. NO. 2 AND STICKER LABEL NO IA 1037.OR STICKER LABEL DRG.NO.AFK/SK-758-13[65]() Specification : DESGN REF NO. CIA/AMN/2008 C Nonestab
3) SET OF AMMUNITION CONTAINER 67 A,DRG.NO ARDE 2065 DET. 5 PART NO. ISV 521 A WITH BOTTOM SLEEVE TO DRG. NO. ARDE 9657 DET.NO 1 TOP SLEEVE TO DRG.NO. ARDE 9657 DET. 2 [60]() Specification : DRG.NO ARDE 2065 DET. 5 PART NO. ISV 521 A C Nonestab
4) AMMUNITION CONTAINER 47 B, DES.REF CIA/AMN/2483, PT. NO. ISV 515 A, DC 36647-A, SPECN NO CQA(A) 2804 (m) DC 36202-A.[65]() Specification : CQA(A) 2804 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) COLLAR NOSE TO DRG NO ARDE 2233 DET NO.1 PART NO ISV 1942[60]() Specification : DRG NO ARDE 2233 DET NO.1 PART NO ISV 1942 C Nonestab
2) NYLON RING DESIGN REF. CIA/AMN/1579 PART NO. ITV-50[60]() Specification : DESIGN REF. CIA/AMN/1579 PART NO. ITV-50 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) HOUSING DELAY DES REF NO. IA 1899 SHEET NO 2, PT NO. ITX 59 SPECN: CQA(A)1804[61]() Specification : CQA(A)1804 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A[65]() Specification : SPECN.NO. CQA(A) 2804 C Nonestab
Category : dp
Grade : Grade II
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Hand Guard for LMG 7 62 51mm Belt Fed as per drawing no1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA[70]() Specification : Hand Guard for LMG 7.62X51mm Belt Fed as per drawing no. 1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) RAIL SK 6548 TE[70]() Specification : RAIL SK-6548/ TE C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) HAND GUARD ASSEMBLY SK 6624 TE[70]() Specification : HAND GUARD ASSEMBLY SK- 6624/TE C Nonestab
2) Pistol Grip Assembly SK 6646 TE[70]() Specification : Pistol Grip Assembly SK-6646/ TE C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) MAGAZINE ASSEMBLY SK 6614 TE[70]() Specification : MAGAZINE ASSEMBLY SK- 6614/TE C Nonestab
Category :
Grade : Grade III
Size : S
880 BNK ENERGY ALTERNATIVES PVT LTD
14/21 site 4 SAHIBABAD INDUSTRIAL AREA 14/21 site 4 GHAZIABAD Uttar Pradesh
PIN1 : 201010
Phone No. : 9871809609
GSTIN : 09AAICB2235K1ZL 		MRTB03642C

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOOSTER CUP & PIN FOR 84MM HEAT-551 (9911358084)[99]() Specification : SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ). C Nonestab
2) CAP AND BOTTOM SPECN: F1301-905060-P (9911350158)[99]() Specification : CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91. C Nonestab
3) CAP AND LOCK BOTTOM F1301-905060-P (2013998518)[20]() Specification : CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91 C Nonestab
4) SET OF14 ITEMS WITH PERFORATED DISC (9911356669)[99]() Specification : SET OF 14 COMPONENTS ( 81 MM SMOKE GRENADE EMPTY COMPONENTS)WITH DISC PERFORATED & DELAY ELEMENT(DETAILS AS PER ENCLOSEDLIST.)LOT SIZE - 2050 SET C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) ARMING DEVICE CASINIG ASSY FOR 551 Lf 9911357821[99]() Specification : ARMING DEVICE CASING ASSY TO DRG.NO.5209 556. C Nonestab
2) SET OF 6 COMP OF ARMING DEVICE 551 lf 9911358074[99]() Specification : SET OF FOLLOWING 6 COMPONENTS FOR ARMING DEVICE FOR 84MM 551(1)HOUSING TRD NO.2-2-2217 (2)CONTACT SLEEVE TRD NO.1-2-2192(3)CONTACT PIECE RETAINER TRD NO.1-2-2194 (4) CONTACT SLEEVEINSULATOR TRD NO.1-2-2199 (5) PROTECTIVE COVER TRD NO.2-2- C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CARBON NOZZLE BLANK FOR 84 HEAT-551[99]() Specification : CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SET OF 4 COMPONENT FOR ARMING DEVICE LF 9911358289[99]() Specification : SET OF 4 COMPONENT FOR ARMING DEVICE FOR 84MM HEAT-551 CONSIST OF.(i) ROTOR TO DRG. NO. 304057290.(ii) ROTOR HOUSING TO. DRG NO. 4113197.(iii) STOP SCREW ASSEMBLY TO DRG.NO. 6413223.(iv) PROTECTIVE SHEET METAL TO DRG. NO. 304050586. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PRIMER BODY WITH CONTACT MOULDED LF 9911356265[99]() Specification : BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS. C Nonestab
Category :
Grade : Grade III
Size : S