1) MEMBRANE TO CQA A DRAWING NO BW 8 363 012 DC 37271 A DT 08 11 10[00]()
Specification : MEMBRANE TO CQA(A) DRAWING NO.BW 8.363.012 DC 37271-A DT. 08-11-10.
C
Nonestab
2) CAP TO OFAJ DRG NO FS 2498B WITHOUT SURFACE TREATMENT[00]()
Specification : CAP TO OFAJ DRG. NO.FS-2498B (WITHOUT SURFACE TREATMENT)
C
Nonestab
3) CAP TO CQA AMMN DRG NO BW 8 635 063 DC 37271 A DT 08 11 10[00]()
Specification : CAP TO CQA(AMMN.) DRG. NO.BW 8.635.063 DC 37271-A DT. 08-11-10.
C
Nonestab
4) SAFETY LOCK ASSEMBLY TO DRG NO BW 6 042 512 CB DC 34241 A DT 24 09 87[00]()
Specification : SAFETY LOCK ASSEMBLY TO DRG.NO.BW.6.042.512 CB DC-34241-A,DT 24.09.87,CONSISTING OF 4 COMPT.(1)SLIDER TO DRG.NO.BW8.264. 006 (2)CLIP TO DRG.NO.BW8.388.004 (3) CAP TO DRG.NO.BW8.635 006 (2)CLIP TO DRG.NO.BW8.388.004 (3) CAP TO DRG.NO.BW8.6
C
Nonestab
5) DELAY TRAIN TO OFAJ DRG NO FS 2496B OR CQA A DRG NO BW 8 635 111 DC NO 37271 A DT 08 11 10[00]()
Specification : DELAY TRAIN TO OFAJ DRG. NO. FS-2496B OR CQA (A) DRG NO. BW 8.635.111 DC NO. 37271-A DT. 08-11-10
C
Nonestab
6) WASHER TO CQA AMMN DRG NO BW 9 440 010 DC 37271 A DT 08 11 2010[00]()
Specification : WASHER TO CQA(AMMN.) DRG. NO. BW 9.440.010 DC 37271-A DT. 08.11.2010.
C
Nonestab
7) CAP II 1 TO DRG NO DET 1 DC 37271 A DT 08 11 10[00]()
Specification : CAP II-1 TO DRG. NO. CQA(A)/AMN/2860 DET-1 DC 37271-A DT.08-11-10
C
Nonestab
8) DISC TO CQA AMMN DRG NO BW 8 685 000 DC 34241 A DT 24 9 87[00]()
ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PROV) (iii) TERMINAL
C
Non Established
57) SIGNAL FLARE (ASSY) FOR INDIAN NAVY()
DRG.NO.NASK 864/1(PROV)CONSISTING OF1.UPPER BODY TO DRG.NO.NASK 864/1/2(PROV)2.LOWER BODY WITHFINS TO DRG.NO.NASK 864/1/3(PROV)3.PROPELLANT TUBE TO DRG.NONASK 864/7/1(PROV)4.NOSE CAP TO DRG.NO.NASK 864/1/1(PROV)5.STEEL WASHER TO DRG.NO.NASK 864/6 (PROV).
DRG.NO.ARDE 2024/DET.1 CONSISTING OF :(1) NOSE TO DRG NO ARDE 2024 DET NO.2 (2) NOSE CAP-RING ASSY TO DRG NO ARDE 2024 DET NO.3 SHT.1 (3) TRIPOD SPRING TO DRG.NO ARDE 2024 DET NO.4(4) STRIKER TO DRG NO ARDE 2024 DET 5(5)MULTI-TOOTH LOCK WASHER B-6-4 TO IS
C
Non Established
60) BASE PLATE ASSY. FOR BOMB 3KG PRACTICE()
DRG.NO.ARDE-2024 DET 10.AMENDED VIDE AL NO.650 DATED 16-3-90 CONSISTING OF-I)BASE PLATE TO DRG.NO.ARDE 2024 DET NO.11II)ADAPTER TO DRG.NO.ARDE 2024 DET NO.12AMMENDED VIDEAL650 DT.14.03.90.
C
Non Established
61) NUT FOR BOMB 3KG PRACTICE()
DRG.NO.ARDE 2024/DET NO.16
C
Non Established
62) SAFETY PIN ASSEMBLY()
DRG.NO.ARDE 2024 DET NO 28 CONSISTING OF:(1)STRIP(2)PIN(3)FLAG RED(4)SAFETY SCREW(5)SPRING RING TODRG NOS(1)ARDE 2024/29,(2)ARDE 2024/30,(3)31 (SHTS2),(4)32,5)34 RESPECTIVELY WITH CIRCLIP LIGHT A75IS:3075/1975 Gd.10R2AND MULTITOOTH LOCK WASHER B6-4 IS : 5
DRG.NO.ARM 1108 C-1 CONSISTING OF-1) BODY ARM 1108 C2 (2) SCREW NECK ARM 1108 B3 3) PLUG CAP ARM 1108 A5 (4) SCREW CAP ARM 1108 A4 5) BASE & SPIKE ARM 1108 A6.
C
Non Established
64) FUZE T&P (EMPTY) M4 FOR 120MM ILLG.()
DRG. NO. ARDE 2014 SHEET NO. 2 PT. NO. IQX 68 GE DC-35076-A DT. 19-04-91 SPECN. NO. (L) 9974-F(L) DC 35271-A DT. 24-02-92
C
Non Established
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF HOLDER PRIMARY CHARGE & ADAPTER PRIMARY CHARGE FOR SHELL 155MM ILLG. M1A1[63]()
1) BAYONET AS PER DRG NO K9030STR WITH FIRMS MATERIAL[70]()
Specification : BAYONET AS PER DRG NO K9030STR WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) STABLIZER BLADE FIN TO C I A KIRKEE DRG NO 024[00]()
Specification : AS PER DRG
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA A DRG NO 13021 0 0 DC I NO 35218 A DT 13 11 91 WITH CUP BOOSTER[63]()
Specification : BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA(A) DRG. NO.13021-0-0.DC(I). NO.35218-A DT.13-11-91. WITH CUP BOOSTER TO CQA(A) DRG.NO.13032-0-0.DC(I). NO.36804-A DT.1-1-02.SPECN. NO. MIL-F-46996 B(MU),AIDEMEMOIRE B/14 AND CQA(A)PROOF
1) HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1,MCT-2396,MCT-2290()
As per required Specification
C
Not Estab.
Category : DP
Grade : II
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) PIN FOR LEVER RIFLE[74]()
Specification : PIN FOR LEVER CONTROL HAND TO DRG. NO. MCT-3230 FOR 5.56 MM RIFLE
C
Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CASE TO DRG.PART NO.QX-172,DC NO. 35639-A[63]()
Specification : CASE TO DRG.PART NO.QX-172,DC NO. 35639-A DT.28.12.93, MATERIAL SPECN:COPPER ALLOY STRIP TO IS:3167-1982 (FIRST REVESION)(RA 2009)WITH HARDNESS 55 TO 75 VPN)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) EXPLODER CASE 3 OZ 15 DR[62]()
Specification : EXPLODER CASE (3 OZ-15 DR): EXPLODER CASE TO DRG. NO. ARM 1172 B28 DT. 15-05-86
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) PRIMER ELECTRIC NO N30MK1 EMPTY[62]()
ERDL DRG 971, DET NO.1ARD NO-2374 DT.31.01.08 SPECIFICATION:ERDL/PYRO/PS-152(a) CONSISTING OF(01)BODY TO DRG NO.NAD 1589/1/1 ARD-2371 DT.24.07.07(QTY 01 NO.), (02) CONTACT BOLT: ERDL DRG 971 DET NO.3ARD-2403 DT.19.04.10(QTY-01 NO.),(03)PRIMER MAGAZINE CUP
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) BUS BAR FOR RGB 60[33]()
Specification : IS 6603: 1972 GR 07 Cr 18 Ni 9 / STEEL TO IS 513 GR 0 EDD
1) ARMING PYRO DELAY EMPTY TO DRG LF 9911358385
Description : ARMING PYRO DELAY EMPTY TO DRG LF 9911358385()
Specification : ARMING PYRO DELAY EMPTY TO DRG.NO.Khs-2-2-0405(a)
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR30MM BMP-II AMMN()
CQA(A) DRG.NO.bw.3.140.039.cb/c,DC-34241 -A,DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040,SHEET NO.Bw.3.140.039 II M/c (12 SHEETS) DC-
C
Not Estab
Category : DDP,DP
Grade : I,II
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR30MM BMP-II AMMN[63]()
CQA (A) DRG.NO.bw.3.140.039.cb/c, DC-34241-A, DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040,SHEET NO.Bw.3.140.039 II M/c (12 SHEETS) DC-
C
Nonestab
Category : DDP,DP
Grade : I,II
Size :
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PYRO DELAY TUBE EMPTY LF 9911358384[99]()
Specification : PYRO DELAY TUBE EMPTY TO DRG.NO.Khs-2-2-0406(a)
2) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)[99]()
Specification : TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED.N
C
Estab
3) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)[61]()
Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).
C
Nonestab
4) ASSEMBLY OF S&A (EMPTY) COMPONENTS FOR FUZE FB-40 OF 40 MM PFFC AMMN. (9911357765)[99]()
Specification : AS PER SPECIFIED DRG. & SPECIFICATION
C
Estab
5) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)[99]()
Specification : MANTLE TO DRG.NO.TRD-2-2-2271.
C
Estab
6) CARBON NOZZLE BLANK FOR 84 HEAT-551 (9911357920)[99]()
Specification : CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.
2) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)[99]()
Specification : TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED.
C
Nonestab
3) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)[61]()
Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).
C
Nonestab
4) ASSY OF S&A(EMPTY) COMPONENTS PFFC (9911357765)[99]()
Specification : ASSEMBLY OF S&A (EMPTY) COMPONENTS,CONSISTING OF FOLLOWING COMPONENTS AS PER ATTACHED LIST.NOTE- QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL.ATTACHED.ENCL.-2
C
Nonestab
5) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)[99]()
Specification : MANTLE TO DRG.NO.TRD-2-2-2271.
C
Nonestab
6) CARBON NOZZLE BLANK FOR 84 HEAT-551 (9911357920)[99]()
Specification : CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.
C
Estab
7) EMPTY FUZE B-25M TO DRG.TRD-1778 (9911357354)[99]()
Specification : EMPTY ASSY.FUZE 25M TO DRG.NO TRD-1778a ( CONSISTING OF 37 ITEM ) REQD. FOR 140 MM ROCKET
1) Butt Assembly drg .no. 1005-000835 for Carbine 9mm[70]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) Device for loading & unloading of Cartridge Belts Assy()
6CH16CBCB
C
Not Established
Category : P
Grade : II
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BLANK FOR CARBON NOZZAL LF 9911358750
Description : BLANK FOR CARBON NOZZAL LF 9911358750()
Specification : BLANK FOR CARBON NOZZAL TO SPEC. NO. 00813350 MATERIAL MERSEN GRADE 2114 TO DRG. NO. 304066482 TO PART NO. 06413206
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SHUTTER PLATE TBRL LF NO 9911358300[99]()
Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0
C
Nonestab
2) SELF TAPPING SCREW DRG 121932 LF NO 9911357650[99]()
Specification : SELF TAPPING SCREW TO DRG NO.TRD 121932
C
Nonestab
3) 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529[99]()
Specification : 6th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Steel Screw (Qty-2nos), TBRL/MMG-H/BO/01/R1 2.Adaptor Screw (Qty-2nos),TBRL/MMG--H/BO/05/R2 3.Quarter Pin, TBRL/MMG-H/BO/03/R0
C
Nonestab
4) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528[99]()
Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/
C
Nonestab
5) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527[99]()
Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.
1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/
MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN FOR FUZE FB 40 FOR 40 MM PFFC LF 9911358194[99]()
Specification : SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0
5) BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12[62]()
Specification : BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12 [USING WITH BODY (ALTERNATIVE) TO DRG.NO.bW 8.035.085/C SHEET 3 & 4 DC NO.34640-A,DT-9.6.89]. REF:(1) BODY WITH ASSY. DRAWING bW 5.500.113 Cb/c DC(1)-
C
Nonestab
6) DISC TO DRG.3-027321-4B2-24,DC NO: 36894-A[63]()
Specification : DISC TO DRG.3-027321-4B2-24,DC NO: 36894-A,DT-21.04.2003(THICKNESS:0.07MM + 0.012)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) DISC TO DRG.NO.2-013535[62]()
Specification : DISC TO DRG.NO.2-013535/53-00-482M/14, DC NO.36785-A, DT.08.10.2001.
Specification : CUP YA-5 FOR A30-T (DET) TO DRG.NO. FOR PRIMER A-30-T CQA(A)/AMN/2856,DCNO.37271-A,DT.08.11.10.
C
Nonestab
4) CAP TO DRG NO ARM 1172 A26[62]()
Specification : CAP TO DRG. NO.ARM 1172 A26DT.24-11-79
C
Nonestab
5) CUP Y1 3[64]()
Specification : 6410120650 CUP Y1-3 -[IGNITING PRIMER MG-8] TO DESIGNER REF NO. CQA (A)/AMN/2855.DC NO.37271-A DT.08.11.10 SCANNED DT. 05.01.2011 HEIGHT SHOULD BE FROM 1.30MM TO 1.40MM OUTSIDE DIAMETER SHOULD BE 2.35MMTO 2.38MM. NOTE: - EDGES SHOULD B
C
Nonestab
6) CAP K3 2[64]()
Specification : 6410120620 CAP K3-2 [IGNITING PRIMER MG-8] TO DESIGNER REF. NO. CQA(A)/AMN/2854.DC NO.37271-A, DT.08.11.10 SCANNED ON DT.05.01.11. HEIGHT SHOULD BE FROM 3.05 MM TO 3.15 MM. NOTE:- EDGES SHOULD BE VERY SMOOTH, EQUAL HEIGHTED, NO CROWN & SH
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00[99]()
Specification : SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00[99]()
Specification : SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00
C
Estab
2) PIN AND HOUSING ASSY TO DRG NO 740-22-32-00[99]()
Specification : PIN AND HOUSING ASSY TO DRG NO 740-22-32-00 GOLD PLATING TO SPEC IS:3266-1982
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) VALVE PART NO 404038806 LF 9911358407
Description : VALVE PART NO 404038806 LF 9911358407()
Specification : VALVE PART NO. 404038806 TO OEM DRG.NO.304074199 TRD.DRG.NO.3.2.2547
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249.[99]()
Specification : BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249.
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249.[99]()
Specification : BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249.
C
Nonestab
2) PIN AND HOUSING ASSY TO DRG NO 740-22-32-00[99]()
Specification : PIN AND HOUSING ASSY TO DRG NO 740-22-32-00 GOLD PLATING TO SPEC IS:3266-1982
R
Nonestab
3) MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00[71]()
Specification : MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00.
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MFG. & SUPPLY OF ELIMINATOR FLASH NO.2 WHITE FINISHED BLANK TO DRG. NO. TEND 1692* (ICR 1576).[70]()
Specification : AS PER DRG. NO. TEND 1692* (ICR 1576)
C
Nonestab
Category : ddp
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF BLOCK EJECTOR ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.[70]()
Specification : AS PER ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.
R
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG NO K 4110 WITH FIRM'S MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF BAYONET 2A WITH SCABBARD BAYONET 1A.TO DS.CAT.NO. 1005-001719 DC.NO.25340-SA,DT.25.04.02&DS.CAT.NO.1095-000207 D.C No.26302-SA Dt.05.03.2007 FOR DC NO.& SPECN. LATEST ISSUE TO BE FOLLOWED[70]()
Specification : AS PER DRG DS.CAT.NO. 1005-001719 DC.NO.25340-SA,DT.25.04.02&DS.CAT.NO.1095-000207 D.C No.26302-SA Dt.05.03.2007 FOR DC NO.& SPECN. LATEST ISSUE TO BE FOLLOWED
E
Nonestab
Category : ddp
Grade : Grade II
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FOLDABLE BUTT FOR RIFLE 5.56MM INSAS[70]()
Specification : FOLDABLE BUTT FOR RIFLE 5.56MM INSAS(STEEL COMPT)CONSIDERINGOF BUTT FRAME ASSY, ARDE/2975/41(DC-S/515) CONSIST OF 10,11,19,20,23,29,33,35,36,37,46 & RFI.SK.NO.7225-S,7226-S,7227-S ,7369-S AND SPG.DOWEL SLEEVE 2DIA X7MM & 5DIA X 42MM & 6DIA
C
Nonestab
2) PLUG GAS CYLINDER[79]()
Specification : PLUG GAS CYLINDER FOR RIFLE 5.56MM INSAS, DS CAT NO-1005-007749 (DC-26520-SA))
C
Nonestab
3) BLANK FOR STUD CHANGE LEVER .[79]()
Specification : BLANK FOR STUD CHANGE LEVER TO RFI SK.7017-S (DC-NILDT.12/9/2001). FOR RIFLE 5.56 MM INSAS.TP OF MATL. TO BEBLANK CARBURISED TO ACHIEVE MECHANICAL PROPERTIES OF BASICMATL.& TO ACHIEVE 400-475 HV AFTER H&T.GRAIN SIZE TO CONFORMASTM 5 TO 8 &
C
Nonestab
Category : p
Grade : Grade II
Size :
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FLASH ABSORBER FOR RIFLE 5.56MM INSAS (WITHOUT PHOSPHATING)[79]()
Specification : FLASH ABSORBER (WITHOUT PHOSPHATING)TO RFI.SK.-7770-S{DS CATNO.1005-007739(DC-24638-SA)}.NMIR TEST ASPER IS:4163-82 WITHACCEPTANCE STD.BETTER THAN 3(THIN)& 1(THICK)FOR A,B,C,D &MACRO ETCH TEST ASPER ASTME-381-84 WITH ACCPT.LIMIT C2 R2 S2F
C
Nonestab
2) BLOCK REAR BLANK FOR 7.62MM ASSAULT RIFLE (GHAATAK) [70]()
Specification : BLOCK REAR BLANK FOR 7.62MM ASSAULT RIFLE AS PER DRG NO.RFISK NO.9498/1
C
Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Housing Firing Mechanism to Drawing number 30P 3014 STAR required for 40mm MGL[70]()
Specification : Housing Firing Mechanism to Drg. No. 30P 3014 STAR required for 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Housing Firing Mechanism to Drawing number 30P 3014 STAR required for 40mm MGL[70]()
Specification : Housing Firing Mechanism to Drg. No. 30P 3014 STAR required for 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) HOUSING WITH PIN FINISHED FOR DET L F 9911358156[99]()
Specification : HOUSING WITH PIN DRG.PT NO.IQX-85 SA.DC 36709 A, DATE.08-09-2000.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION[70]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HOUSING LEVER SEAR TO DRG.NO.M-8201b(PB-8) FOR 0.32 PISTOL[70]()
Specification : DRG.NO.M-8201A(PB-8) FOR 0.32 " PISTOL
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]()
Specification : AS PER DRAWING
C
Nonestab
2) Plug Representing Fuze in FC TO DRG NO M 10394[60]()
Specification : As per drg. no. M-10394
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HOUSING LEVER SEAR TO DRG.NO.M-8201b(PB-8) FOR 0.32 PISTOL[70]()
Specification : DRG.NO.M-8201A(PB-8) FOR 0.32 " PISTOL
C
Nonestab
2) BODY SUB ASSEMBLY TO SK NO.OTE/SE/010 INF/C[62]()
Specification : AS PER DRG. & SPECIFICATION
C
Nonestab
3) STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT[62]()
Specification : STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION[70]()
Specification : AS PER DRAWING
C
Nonestab
2) Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15[62]()
Specification : . Det. no 2-1 of Store Drg No 3-024045 (SK NO-OTF/DD/023)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) HOUSING OG TO DRG NO. CWC/229/1[74]()
Specification : HOUSING OG TO DRG NO. CWC/229/1
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) FILLING HOLE PLUG[10]()
Specification : DESIGN.REF CIA/AMN/1799 DET NO. 8 PART NO. ITW 69 SA DC 35817-A SPECN. NO. CQA(A) 1504(E) DC 35870
R
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) FUSE T & P 213 MK 5 (M-R) (EMPTY) TO DRG. NO.ARDE 2020 DET.1. DT.7.3.90. SPECN NO ARDE/SPECN/440 AND 441.[99]()
Specification : ARDE/SPECN/440 AND 441
C
Nonestab
2) FUZE YDB-60 ASSEMBLY (EMPTY) ;DRG. NO.NAI(P) SK 284[60]()
Specification : DRG. NO.NAI(P) SK 284
C
Nonestab
3) FUZE (EMPTY) FOR ROUND 40 MM MGL DRG. AFK/SK -576-09 Sht. 1 DT. 22.11.2009[60]()
1) TRIPOD SUPPORT TO DRG NO. AFK/SK-628-09 FOR 40 MM MGL AMMN.[00]()
Specification : TRIPOD SUPPORT TO DRG NO. AFK/SK-628-09 FOR 40 MM MGL AMMN.
C
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) TRIPOD SUPPORT TO DRG NO. AFK/SK-628-09 FOR 40 MM MGL AMMN.[00]()
Specification : TRIPOD SUPPORT TO DRG NO. AFK/SK-628-09 FOR 40 MM MGL AMMN.
C
Nonestab
2) SLIDE SHOE TO OFAJ DRAWING NO FS 3024[00]()
Specification : SLIDE SHOE TO OFAJ DRAWING NO FS-3024
C
Nonestab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) SET BACK SPRING(STARLET) TO DRG.NO. AFK/SK-631-09 FOR 40 MM MGL AMMN.[00]()
Specification : SET BACK SPRING(STARLET) TO DRG.NO. AFK/SK-631-09 FOR 40 MM MGL AMMN.
C
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) MECH STRIKER ASSY. TO DRG NO. AFK/SK-620-09 FOR 40 MM MGL AMMN[00]()
Specification : MECH STRIKER ASSY. TO DRG NO. AFK/SK-620-09 FOR 40 MM MGL AMMN
C
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CONVERSION OF BOAT TAIL FORGING[00]()
Specification : CONVERSION OF BOAT TAIL FORGING (IN HEAT TREATED CONDITIO) AS PER REF. DRG. F-448 J (OR LATEST ISSUE) IN TO BOAT TAIL MACHINED TO CQA (A) DRG. NO. 155-1150 COMPLETE WITH ANODIZING & PAINTING. INPUT MATERIAL FOR CONVERSION WILL BE PROVIDED
R
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]()
Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001
R
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]()
Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001
R
Estab
2) ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT[00]()
Specification : ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT
C
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) TIMER ASSEMBLY TO DRG.NO. 8801 00 01 01 06 000 00 TA DT.14-12-99, SPECN. ARDE/SPECN/604/1998 .[61]()
14) CHARGE DEMOLITION NO 1, 152.4MM MK-5/L (GENERAL ARRANGEMENT) BEEHIVE, EMPTY,DRG NO IA 572/1,5 DETAILS,PART NO ITX 15 GE, SPECN NO CQA 0511[6432501000]()
Specification : CQA 0511
C
Nonestab
15) FIRING BOLT TO CQA[A] SEALED DRG.NO. 04-749-130222-04.1E[60]()
1) SET OF COMPONENT FOR PYRO SQUIB OPERATOR (II 3-253-M5) CONSISTING OF 6 COMPONENTS.1) BODY 2) GASKET 3)SLEEVE-I (4) SLEEVE II (5)SPACER (6) CUP TO DRG .NO. NASK--- 1089/1 (PROV.)[6099990159]()
Specification : DRG .NO. NASK--- 1089/1 (PROV.)
C
Nonestab
2) COMPONENTS FOR SQUIB PSQ-6 CONSISTING 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG.NO. PTA-L-54-01-01-103-X[6099990236]()
Specification : 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG. NO. PTA-L-54-01-01-103-X
C
Nonestab
3) SQUIB HOLDER TO DRG. NO. AFK/SK-334-06 FOR IGNITER EB-1 DT.2-2-2006][6099991378]()
Specification : DRG. NO. AFK/SK-334-06
R
Estab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) 105 MM MRIR EMPTY[61]()
Specification : DRG. NO. NASK DRG.NO.989
C
Nonestab
2) FUZE PERCN DA 117 MK20 EMPTY COMPLETE[63]()
Specification : I.A. 1204
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]()
10) MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56
Description : MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56()
Specification : MONOPOD ASSEMBLY FOR5.56 LMG AS PER DRG NO.ARDE SK-3302 IN FINISHED CONDITION CONSISTING OF 21 COMPONENTS VIZ. DRG.NO.-ARDE SK-3302/1 TO 3302/21.(BROWN COLOUR)
C
Estab
11) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)
Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)()
Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)
C
Estab
Category : p
Grade : 3
Size :
S
1) Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) CARTG.TRG FOR 81MM MOR.BOMB3B(EMPTY
Description : CARTG.TRG FOR 81MM MOR.BOMB3B(EMPTY()
Specification : CQA (A) 2348
R
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG NO F1301047062E DC36160 A DT 31 08 96[00]()
Specification : TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG. NO. F1301-047062E DC-36160-A DT.31.08.96
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) NOZZEL TO ARDE DRG NO 1135 DET 10[00]()
Specification : NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14
3) 6331800200 FUZE PERCN DA NO 162 MK-9(M-1)EMPTY[63]()
Specification : SPECN.NO. CQA(A) 0917
C
Nonestab
4) 6043000153 ADAPTOR TUBE ITV 13 A FOR 120MM PWP[60]()
Specification : ADAPTER, TUBE, ASSY. TO DRG. PART NO. ITV 13-A DC NO. 36930-A FOR 120 MM PWP.
C
Nonestab
5) 6044100058 PLUG REPRESENTING FZ 162A FOR 81MM[60]()
Specification : PLUG REPRESENTING FUZE NO.162 A TO DRG. PART NO. ITV-17 FOR BOMB 81 MM MORTAR INERT-FUZED A, PLUGGED A, TO DRG. PART NO. ITV-7A
C
Nonestab
6) 6078000600 CAP CONDUCTING COMP EMPTY 105MM TK SH[60]()
Specification : CAP CONDUCTING COMPOSITION EMPTY DRG PART NO. QX-115 A DC.NO.36230-A DATED 29-01-97 SPEC NO. L 10155 A (B) DC NO. 31887-A DATED 12-03-76
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) BODY SEMI FINISHED TO OFAJ DRG NO FS 1851 E[00]()
Specification : BODY (SEMI FINISHED) TO OFAJ DRG. NO. FS-1851 E
C
Nonestab
2) CAP TO OFAJ DRG NO FS 1160A[00]()
Specification : CAP TO OFAJ DRG.NO. FS-1160A
C
Nonestab
3) HEAD WITHOUT SURFACE TREATMENT TO OFAJ DRAWING NO FS 2936 OR LATEST AMENDED DRG AND SPECN AS ON TE DATE[00]()
Specification : HEAD (WITHOUT SURFACE TREATMENT) TO OFAJ DRAWING NO.FS-2936 OR LATEST AMENDED DRG. AND SPECN AS ON T.E. DATE.
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
2) TOP FRAME FOR CARRIER 13A[07]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
3) BODY TOP ASSEMBLY FOR CARRIER 16A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
4) CATCH FOR BOX H5A[07]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
C
Nonestab
5) BOTTOM CENTRE PARTITION[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
C
Nonestab
6) BIGGER BRACKET FOR BOX SM 171K[07]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
C
Nonestab
7) CATCH FOR BOX SM 171K, 651J, 642[07]()
Specification : AS PER DRG./SPECIFICATION
C
Nonestab
8) LID CORNER PIECE FOR BOX C-53A[07]()
Specification : AS PER DRG./SPECIFICATION
E
Nonestab
9) PLATE FOR HINGE FOR BOX H2A[07]()
Specification : AS PER DRG./SPECIFICATION
R
Nonestab
10) HINGE WITH HINGE PIN ASSY FOR BOX H2A[07]()
Specification : HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067
E
Nonestab
11) CATCH PLATE (WITH ASSLY) FOR BOX H2A - AS PER DRG. NO. OFB/C/717[07]()
Specification : AS PER DRAWING/SPECIFICATION.
C
Nonestab
12) BRACKET MIDDLE FOR BOX C-51A AND C52A[07]()
Specification : BRACKET MIDDLE FOR BOX C-51A & BOX C-52A
AS PER DRG.NO.OFB/C/1363,DET-12 & OFB/C/1364,DET-10
REF.DRG.NO.ISV-2033 DC 36629-A DATED 06/01/2000.
E
Nonestab
13) BRACKET CROSS FOR BOX C51A[07]()
Specification : AS PER OFBH SPECIFICATION
C
Nonestab
14) BRACKET TOP FOR BOX C 51-A[07]()
Specification : BRACKET TOP FOR BOX C 51-A
R
Nonestab
15) STRENGTHENING PLATE OFB/C/1546[07]()
Specification : STRENGTHENING PLATE OFB/C/1546
R
Nonestab
16) STRENGTHENING BAND OFB/C/1584[07]()
Specification : STRENGTHENING BAND OFB/C/1584
R
Nonestab
17) HINGE FOR BOX SM 171 K 642 C[07]()
Specification : HINGE FOR BOX SM 171 K 642 C
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) HINGE AS PER DRG NO. OFB/C/1410[07]()
Specification : Drg.No. OFB/C/1410-A
E
Nonestab
2) HINGE AS PER DRG. NO. OFB/C/1565[07]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
3) BOTTOM FOR BOX H5A[99]()
Specification : As per O.F.Bhusawal Drawing/Specification
C
Nonestab
4) HINGE PIN FOR BOX H5A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
5) LINK HOLDING END FOR BOX H2A[07]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
6) LINK FOR HANDLE FOR BOX H2A[99]()
Specification : AS PER DRG./SPECIFICATION
R
Nonestab
7) PIECE PACKING 'B'[07]()
Specification : AS PER DRG NO. OFB/C/1541
E
Nonestab
8) HANDLE & HANDLE CLIP ASSLY/1466A[99]()
Specification : AS PER DRAWING/SPECIFICATION.
R
Nonestab
9) HINGE PIN DRG. NO. OFB/C/700[07]()
Specification : HINGE PIN DRG. NO. OFB/C/700
R
Nonestab
10) ASSEMBLED SECURING PLATE 1545[07]()
Specification : ASSEMBLES SECURING PLATE 1545
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) 9911842886 CENTER PARTITION FOR BOX C 53A[07]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
2) 9911846616 BODY BOTTOM ASSEMBLY FOR CARRIER 16A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
3) 9911846617 BODY TOP ASSEMBLY FOR CARRIER 16A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
4) 9911842887 BRACKET END SHEEL FOR BOX C 53A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
5) 9911842201 LINK FOR HANDLE[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
C
Nonestab
6) 9911842880 BRACKET CARTRIDGE REAR FOR BOX C53[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
E
Nonestab
7) 9911846247 BIGGER PACKING PIECE FOR BOX SM 171K[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
C
Nonestab
8) 9911842882 CHANNEL FOR BOX C 53A[07]()
Specification : AS PER DRG./SPECIFICATION
C
Nonestab
9) 9911843270 PIECE PACKING A[07]()
Specification : AS PER DRG./SPECIFICATION
C
Nonestab
10) 9911846249 STAPLE FOR BOX SM 171 K[07]()
Specification : STAPLE FOR BOX SM 171 K
R
Nonestab
11) 9911842876 BRACKET A1 FOR BOX C 53A[99]()
Specification : AS PER OFBH SPECIFICATION
C
Nonestab
12) 9911842885 BOTTOM SUPPORT PIECE BOX C53A[99]()
Specification : AS PER OFBH SPECIFICATION
C
Nonestab
13) 9911847060 SMALLER BRACKET FOR SM 651J[99]()
Specification : AS PER OFBH SPECIFICATION
C
Nonestab
14) 9911843272 STRENGTHENING BAND CR LNK 1538[99]()
Specification : AS PER OFBH SPECIFICATION
C
Nonestab
15) 9911843269 CARRYING LINK DRG OFB C 1540A[98]()
Specification : AS PER OFBH SPECIFICATION
R
Nonestab
16) 9911847059 SUPPORTING BRACKET BOX SM 651[99]()
Specification : AS PER OFBH SPECIFICATION
C
Nonestab
17) 9911847061 BIGGER BRACKET BOX SM 651 J[97]()
Specification : AS PER OFBH SPECIFICATION
C
Nonestab
18) 9911842381 STOPPER REAR FOR BOX C 51 A[99]()
Specification : AS PER OFBH SPECIFICATION
C
Nonestab
19) 9911846246 SMALLER BRACKET FOR BOX SM 171[99]()
Specification : BOX STEEL NO.412 S/4 (GENERAL ARRANGEMENT) DRG.NO.ARDE 1248 AL NO. 49/96 DATE 08.11.96 WITH 5 FITMENTS OF DRG NO. ARDE 1249 DETAIL NO. 1,2,3,4 AND 5. (REQUIRED FOR PACKING OF 68 MM ROCKET HE/PRACTICE)
C
Estab
2) 6570016000 BOX H 50 STEEL[65]()
Specification : BOX AMMUNITION S.A. H 50 MARK 1/LA, STEEL TO DRG.NO.SV 140-A DC (I)-34273-A DATED 21.11.1987
C
Nonestab
3) 6570850706 BOX B7A "OLIEVE GREEN"[65]()
Specification : SPECN. NO. IA 1169
C
Nonestab
4) 6570160000 BOX G 70 MK-1 (STEEL) OLIVE GREEN.[65]()
3) LATCH SUB ASSEMBLY FOR METALLIC CONTAINER FOR TU33E[01]()
Specification : AS PER DRAWING NO. OFBH/SK/1534.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) AMMUNITION CONTAINER BOX B7B STEEL[65]()
Specification : AS PER DRAWING ATTACHED
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)
Description : BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)()
Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C
Description : BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C()
Specification : AS PER OFDC SPECIFICATION
C
Estab
2) COMPLETE BOX STEEL NO 1 MK 1
Description : COMPLETE BOX STEEL NO 1 MK 1()
Specification : AS PER DRAWING
C
Estab
3) STEEL CONTAINER IN F.C
Description : STEEL CONTAINER IN F.C()
Specification : DRG NO- ARM 1519
C
Estab
4) STEEL BOXES
Description : STEEL BOXES()
Specification : DRG.NO- ARDE 2039
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C
Description : BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C()
Specification : AS PER OFDC SPECIFICATION
C
Estab
2) COMPLETE BOX STEEL NO 1 MK 1
Description : COMPLETE BOX STEEL NO 1 MK 1()
Specification : AS PER DRAWING
C
Estab
3) STEEL CONTAINER IN F.C
Description : STEEL CONTAINER IN F.C()
Specification : DRG NO- ARM 1519
C
Estab
4) STEEL BOXES
Description : STEEL BOXES()
Specification : DRG.NO- ARDE 2039
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C
Description : BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C()
Specification : AS PER OFDC SPECIFICATION
C
Estab
2) COMPLETE BOX STEEL NO 1 MK 1
Description : COMPLETE BOX STEEL NO 1 MK 1()
Specification : AS PER DRAWING
C
Estab
3) STEEL CONTAINER IN F.C
Description : STEEL CONTAINER IN F.C()
Specification : DRG NO- ARM 1519
C
Estab
4) STEEL BOXES
Description : STEEL BOXES()
Specification : DRG.NO- ARDE 2039
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C
Description : BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C()
Specification : AS PER OFDC SPECIFICATION
C
Estab
2) COMPLETE BOX STEEL NO 1 MK 1
Description : COMPLETE BOX STEEL NO 1 MK 1()
Specification : AS PER DRAWING
C
Estab
3) STEEL CONTAINER IN F.C
Description : STEEL CONTAINER IN F.C()
Specification : DRG NO- ARM 1519
C
Estab
4) STEEL BOXES
Description : STEEL BOXES()
Specification : DRG.NO- ARDE 2039
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C
Description : BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C()
Specification : AS PER OFDC SPECIFICATION
C
Estab
2) COMPLETE BOX STEEL NO 1 MK 1
Description : COMPLETE BOX STEEL NO 1 MK 1()
Specification : AS PER DRAWING
C
Estab
3) STEEL CONTAINER IN F.C
Description : STEEL CONTAINER IN F.C()
Specification : DRG NO- ARM 1519
C
Estab
4) STEEL BOXES
Description : STEEL BOXES()
Specification : DRG.NO- ARDE 2039
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C
Description : BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C()
Specification : AS PER OFDC SPECIFICATION
C
Estab
2) COMPLETE BOX STEEL NO 1 MK 1
Description : COMPLETE BOX STEEL NO 1 MK 1()
Specification : AS PER DRAWING
C
Estab
3) STEEL CONTAINER IN F.C
Description : STEEL CONTAINER IN F.C()
Specification : DRG NO- ARM 1519
C
Estab
4) STEEL BOXES
Description : STEEL BOXES()
Specification : DRG.NO- ARDE 2039
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
Name
Specification
Use
Status
1) STEEL CONTAINER FOR TU 1111 mod[14]()
Specification : STEEL CONTAINER (FOR TAIL UNIT NO.1111) TO DRG.NO.ARM 1519 IN FINISHED CONDITION
C
Estab
2) STEEL BOX FOR RTU 1121[62]()
Specification : BOX STEEL NO.-- MK-- TO DRG.NO.ARDE-2039 IN FINISHED CONDIT ION FOR 01 RTU TAIL UNIT NO. 1121, HOUSING BLOCK & CLEVIS UNIT ASSY. FOR 1000 LB MK 6 / MK 9 BOMB
C
Estab
3) BOX STEEL NO 1 MK 1 TO HOLD 1 TAIL UNIT NO TB 250 OR TAIL UNIT TB 250 MOD 1 IN FINISHED CONDITION[14]()
Specification : BOX STEEL NO.1,MK-1 TO HOLD 1 TAIL UNIT NO.TB-250 OR TAIL UNIT TB 250-MOD-1 TO DRG.NO.[ARDE 9501-05 SHT.1/3 & SHT.2/3 WITH DC "ISSUE A" DT-10-03- 05 & SHT.3/3 WITH DC AL. NO.07/2008.DT.31-01-08.IN FINISHED CONDITION
C
Estab
4) COMPLETE BOX STEEL FOR TR 250[62]()
Specification : COMPLETE BOX STEEL NO.1 MK-1 TO HOLD 1 TAIL UNIT NO.TR 250 TO DRG.NO.ARDE 9501-04 SHT.1 & SHT.2 IN FINISHED CONDITION
C
Estab
5) BOX STEEL IN FC FOR RTU 2231[62]()
Specification : BOX STEEL NO. 1 TO DRG.NO.ARDE-2283 TO HOLD 01 HOUSING BLOCK & CLEVIS UNIT ASSY. & 01 TAIL UNIT No. 2231 WITH PARACHUTE FOR BOM 450 KG HSLD
3) STEEL ROD DIA 55 MM X L1250 TO SPECN. OST 3-98-80 GRADE OF STEEL 30KHRA[03]()
Specification : AS PER SPECIFICATION
R
Nonestab
4) S S RODS BRIGHT GRADE AISI 316 SIZE 5 MM DIA 1000 MML[71]()
Specification : S S RODS BRIGHT GRADE AISI 316 SIZE 5 MM DIA 1000 MML
C
Nonestab
5) S S RODS DRIGHT GRADE AISI 316 SIZE 18 MM DIA 500 MML[71]()
Specification : S S RODS DRIGHT GRADE AISI 316 SIZE 18 MM DIA- 500 MML
C
Nonestab
6) S S SEAMLESS PIPE GRADE AISI 316 SIZE 127MM ODX 95 MM ID X900 MML[71]()
Specification : S S SEAMLESS PIPE GRADE AISI 316 SIZE 127MM ODX 95 MM ID X900 MML
R
Nonestab
7) STAINLESS STEEL ROUND GRADE AISI 316 SIZE 130 MM OD X 130MM LONG OR ITS MULTIPLE[01]()
Specification : STAINLESS STEEL ROUND GRADE AISI 316 SIZE 130 MM OD X 130MM LONG OR ITS MULTIPLE
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) ST ROUND 25 MM DIA GD 708 M40
Description : ST ROUND 25 MM DIA GD 708 M40()
Specification : STEEL ROUND 25 MM DIA.TO SPECN.IS 5517-1993 GD.42 CR4 MO2 LRS-63MM. IN HOT ROLLED AND ANNEALED CONDITION. TEST PIECE TO BE HEAT TREATED TO "T" CONDITION & MECHANICAL PROPERTIES TO BE CHECKED.(REQD.FOR CYLINDER GAS)
R
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CARBON STEEL BRIGHT ROUNDS TO SPECN BS 970 PT I 1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10 PERCENTAGE SHORTS DOWN TO 2 TO 3 METRES SIZE 35 MM DIA[00]()
Specification : CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.
R
Nonestab
2) HOT ROLLED AND COLD DRAWN CARBON STEEL ROUND TO SPECN BS 970 PT I 1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTR SIZE 7 POINT 5 MM DIA[00]()
Specification : HOT ROLLED AND COLD DRAWN CARBON STEEL ROUND TO SPECN.BS:970 PT.I-1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTR. WITH 10% SHORTS DOWN TO 2 - 3 METRES SIZE: 7.5 - 0.05 MM DIA.
R
Nonestab
3) CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED AND HEAT TREATED TO CONDITION R TO SPECN BS970 PART I 1983 GRADE 410S21 EN56A SIZE 7 MINUS 0 POINT 08 MM DIA[00]()
Specification : CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN. BS970 (PART-I)1983 GRADE 410S21 (EN56A) WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 -
R
Nonestab
4) CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND TO SPECN BS 970 PT I 1983 GR 070M20 HAVING STRAIGHT LENGTH OF 3 MTRS SIZE 25 POINT 4 MINUS 0 POINT 1 MM DIA[00]()
Specification : CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA
R
Nonestab
5) BRIGHT FINISHED CHROMIUM RUST RESISTING STEEL ROUNDS TO SPECN BS 970 PT I 1983 GRADE 410S21 HEAT TREATED TO R CONDITION HAVING STRAIGHT LENGTH OF 3 MTRS SIZE 5 POINT 5 MINUS 0 POINT 08 MM DIA[00]()
Specification : BRIGHT FINISHED CHROMIUM RUST RESISTING STEEL ROUNDS TOSPECN.BS:970 PT.I/1983 GRADE 410S21 HEAT TREATED TO "R"CONDITION HAVING STRAIGHT LENGTH OF 3 MTRS.WITH 10% SHORTS DOWN TO 2-3 MTRS SIZE : 5.5 -0.08 MM DIA.
R
Nonestab
6) BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUNDS TO SPECN BS 970 1983 GRADE 070M20 IN NORMALISED CONDITION STRAIGHT LENGTH OF 3 METERS SIZE 19 MINUS 0 POINT 08 MM DIA[00]()
Specification : BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUNDS TO SPECN:BS: 970-1983 GRADE 070M20 IN NORMALISED CONDITION STRAIGHT LENGTH OF 3 METERS SIZE 19.00 - 0.08 MM DIA
R
Nonestab
7) STEEL GROUND ROUND BARS TO SPECN BS 970 1983 GRADE 070M20IN NORMALISED CONDITION IN STRAIGHT LENGTH OF 2 TO 3 METERS TO SIZE 19 MINUS 0 POINT 052 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0 POINT 3 MM PER MTR[00]()
Specification : STEEL GROUND ROUND BARS TO SPECN: BS:970-1983 GRADE 070M20IN NORMALISED CONDITION IN STRAIGHT LENGTH OF 2 TO 3 METERSTO SIZE:19.00 -0.052 MM DIA HAVING STRAIGHTNESS LESS THANOR EQUAL TO 0.3 MM/MTR
R
Nonestab
8) CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN BS 970 PT 1 1983 GRADE 080M40 IN R CONDITION HAVING MINIMUM UTS OF 696MPA HARDNESS 200 TO 250 VPN SIZE 19 PLUS OR MINUS 1 MM DIA[00]()
Specification : CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN. BS-970(PT-1) 1983 GRADE 080M40 IN "R"CONDITION HAVING MINIMUM UTS OF 696MPA,HARDNESS 200 TO 250 VPN IN STRAIGHT LENGTH OF 2 TO 3 MTRWITH 10% SHORTS DOWN TO 1.5 METRES SIZE: 19.00 +/- 1 MM DI
R
Nonestab
9) BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 340 TO 390 BHN TOSPECN BS 970 EN 56 HARDENED AND TEMPERED TO X CONDITION OR BS 970 EN 25 OR EN 24 HARDENED AND TEMPERED TO X CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES SIZE 11 MINUS 0 POINT 05 MM DIA[00]()
Specification : BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 340 TO 390 BHN TO SPECN BS 970 EN-56 HARDENED AND TEMPERED TO X CONDITION ORBS:970 EN-25 OR EN-24 HARDENED AND TEMPERED TO X CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES. SIZE: 11 -0.05 MM D
R
Nonestab
10) CHROMIUM RUST RESISTING BRIGHT FINISHED STEEL ROUNDS TO SPECN BS 970 GRADE EN 56D 57 58 IN T CONDITION WITH MIN UTS OF 696 MPA SIZE 8 MINUS 0 POINT 08 MM DIA[00]()
Specification : CHROMIUM RUST RESISTING BRIGHT FINISHED STEEL ROUNDS TO SPECN. BS:970 GRADE EN-56D/57/58 IN "T" CONDITION WITH MIN. UTSOF 696 MPA HAVING ST. LENGTH OF 3 TO 4 METRES. SIZE :- 8.00-0.08 MM DIA.
R
Nonestab
11) BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 200 TO 250 VPN TOSPECN BS970 EN 56 HARDENED AND TEMPERED TO R COND OR BS970 EN57 HAVING ST LENGTH OF 2 TO 3 METRES SIZE 3 POINT 5 MINUS 0 POINT 05 MM DIA[00]()
Specification : BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 200 TO 250 VPN TOSPECN.BS:970 EN-56 HARDENED AND TEMPERED TO R CONDITION ORBS:970 EN-57 HAVING ST.LENGTH OF 2 TO 3 METRES. SIZE: 3.5 -0.05 MM DIA
R
Nonestab
12) CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN BS970 PART1 1983 GRADE 080M40 TO R CONDITION WITH MINIMUM UTS 686 MPA AND IN STRAIGHT LENGTH OF 3 TO 4 METRES SIZE 4 MINUS 0 POINT 08 MM DIA[00]()
Specification : CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN. BS970(PART1) 1983 GRADE 080M40 TO "R" CONDITION WITH MINIMUM UTS 686 MPAAND IN STRAIGHT LENGTH OF 3 TO 4 METRESSIZE: 4.00 - 0.08 MM DIA
R
Nonestab
13) CHROMIUM RUST RESISTING BRIGHT FINISHED STEEL ROUNDS TO SPECN BS 970 GRADE EN 56D 57 58 IN T CONDITION WITH MIN UTS OF 696 MPA HAVING ST LENGTH OF 3 TO 4 METRES SIZE 8 MINUS 0 POINT 08 MM DIA[00]()
Specification : CHROMIUM RUST RESISTING BRIGHT FINISHED STEEL ROUNDS TO SPECN. BS:970 GRADE EN-56D/57/58 IN "T" CONDITION WITH MIN. UTSOF 696 MPA HAVING ST. LENGTH OF 3 TO 4 METRES. SIZE :- 8.00-0.08 MM DIA.
R
Nonestab
14) BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 250 TO 300 VPN TOSPECN BS 970 EN 56D HARDENED AND TEMPERED TO T CONDITION OR BS 970 EN 57 OR EN 58 HAVING ST LENGTH OF 2 TO 3 METRES SIZE 10 MINUS 0 POINT 05 MM DIA[00]()
Specification : BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 250 TO 300 VPN TOSPECN.BS:970 EN-56D HARDENED AND TEMPERED TO T CONDITIONOR BS:970 EN-57 OR EN-58 HAVING ST.LENGTH OF 2 TO 3 METRESSIZE: 10 -0.05 MM DIA
R
Nonestab
15) Hot rolled and Cold hardened sized steel of grade 50 to spcTY 14 1 2884 80 Size Steel rod 32 PLUS 0 MINUS 0 POINT 16 DIA IN STRAIGHT LENGTH OF 2 TO 3 M[00]()
Specification : Hot rolled and Cold – hardened sized steel of grade 50 to spcTY-14-1-2884-80 with chem. comp, as per table 1,Inclusion rating as per clause no. 2.6 of the specn. Grain size 5 to 8& mech. properties as per spcn.GOST V(B)10230-75,Table 5, S
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Steel Flat 10 X 35 mm
Description : Steel Flat 10 X 35 mm()
Specification : STEEL FLAT 10X35MM, SPECT BS:970:PT.I:1983 GR,045M10OR ALT .MAT.IS:5517-1978 GD 40 NI6CR 4 MO 3FOR LATCH OF FIRING DEVICE (CQA(I)-393/24.
R
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) C.R.L.C STEEL STRIP 12X1.O MM GR DD()
GR.DD
R
ESTABLISHED
2) C.R.L.C STEEL STRIP 15.5x0.3O MM GR DD()
GR.DD
R
ESTABLISHED
3) C.R.L.C STEEL STRIP 15x1.0 MM GR.DD()
GR.DD
R
ESTABLISHED
4) C.R.L.C STEEL STRIP 50x0.46MM GR.DD()
GR.DD
R
ESTABLISHED
5) C.R.L.C STEEL STRIP 78x0.55MM GR.DD()
GR.DD
R
ESTABLISHED
6) S.S.PLATE 250x33x4.6MM()
AISI-304
R
ESTABLISHED
7) STEEL ROD 21MM()
IS 4431 GR.14C 14514
R
ESTABLISHED
8) STEEL ROD 29MM()
BS-970-817 M40(EN 24)
R
ESTABLISHED
9) STEEL ROD 29MM()
IS-1570-GR 40C10S18
R
ESTABLISHED
10) STEEL STRIP 80x3.56MM()
IS-513 DD CR
R
ESTABLISHED
11) STEEL STP 210X0.45MM()
IS-513-94 DD
R
ESTABLISHED
12) STEEL STRIP 245X0.45MM()
IS-513 -94 DD
R
ESTABLISHED
13) STEEL STRIP 25X0.5MM()
BS:1449 40/CS
R
ESTABLISHED
Category : S
Grade : II
Size :
O
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) STEEL ROD 29MM[01]()
Specification : BS-970-817 M40 (EN24)
R
Estab
2) STEEL STP 210X0.45MM[01]()
Specification : IS-513 -94 DD
R
Estab
3) STEEL ROD 21MM[01]()
Specification : IS-4431 10C8 S-10
R
Estab
4) C.R.L.C STEEL STRIP 12X1.O MM GR DD[01]()
Specification : GR.DD
R
Estab
5) C.R.L.C STEEL STRIP 15.5x0.3O MM GR DD[01]()
Specification : GR.DD
R
Estab
6) C.R.L.C STEEL STRIP 15x1.0 MM GR.DD[01]()
Specification : GR.DD
R
Estab
7) C.R.L.C STEEL STRIP 50x0.46MM GR.DD[01]()
Specification : GR.DD
R
Estab
8) C.R.L.C STEEL STRIP 78x0.55MM GR.DD[01]()
Specification : GR.DD
R
Nonestab
9) STEEL STRIP 80x3.56MM[01]()
Specification : IS-513 DD CR
R
Estab
10) STEEL STRIP 245X0.45MM[01]()
Specification : IS-513 -94 DD
R
Estab
11) STEEL STRIP 25X0.5MM[01]()
Specification : BS:1449 40/CS
R
Estab
12) STEEL ROD 21MM IS4431 GR.14 C14 S14 (0111000021)[01]()
Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.
R
Estab
13) STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145)[01]()
Specification : STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2004)1st REV)GRADE 14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2003)1s
R
Estab
14) STEEL ROD 18MM BS970 080M50 CD ANL (0133001165)[01]()
Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R
R
Estab
15) STEEL ROD 29MM BS-970-817 M40(EN24) (0205100029)[02]()
Specification : COLD DRAWN STEEL ROD 29MM+0.07/-0.13 DIA IN STREIGTH LENGTHOF 2 TO 2.5 MTRS TO SPECN.BS-970-817 M40 (EN24) ORIS-5517-1998 (REV.1) 40 Ni 6 Cr4 Mo3 .
R
Estab
16) STEEL ROD 32MM DIA GOST-V-10230-75 (0184108032)[01]()
Specification : STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE
R
Estab
17) STEEL ROD 21MM IS-4431 14C14S14 CD (0133001021)[01]()
Specification : STEEL ROD 21(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2 TO 3MTR TOSPECN:IS-4431-1978(REAFFIRMED 2014)(1st REV.)GRADE-14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-GREEN,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)1st
R
Estab
18) STEEL ROD 29MM JSS-9510-01 SS/C-24A (0142000029)[01]()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A
R
Estab
Category : S
Grade : II
Size :
1) Gun Carriage Factory
Name
Specification
Use
Status
1) Tool Alloy special steel in shape of –Round, Flat, Square sheet, Plate, Strips, Blocks, Bloom and ()
As per GCF/Drg/Size/specn/IS/BIS/ASW/DIN
C
Not Estab.
Category : P
Grade : II
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) STEEL ROD 32MM 50 TY 14 1 2884 80 LF 0187100032[01]()
Specification : STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MAT
R
Nonestab
2) STEEL ROD 32MM GOST TY14-1-2232-77 (0144101032)[01]()
Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED
R
Nonestab
3) STEEL ROD 29MM IS-1570 GR.40C10S18 (0186000029)[01]()
Specification : STEEL ROD 29[+0.075/-0.13] MM DIA IN ST.LENGTH OF 2.5 TO 3.0MTR TO SPECN:IS-1570( PT-III)-1979 (FIRST REVISION)(REAFFIRMED 2004) GR.40C10S18.
R
Nonestab
4) STEEL ROD 18 MM JSS:9510-01 SS/D32 (0135300018)[01]()
Specification : STEEL ROD 18+0.05/-0.10MM DIA,TO SPECN.SS/D32 TO JSS-9510-01IN NORMALISED CONDITION OR BS-970-PT-1-1983 GRADE O8OM5O INNORMALISED CONDITION,IN ST.LENGTH OF3+/-0.1MTR,HARDNESS 187HB TO 207 HB.MATERIAL TO BE SUPPLIED WITH COLOUR CODE BASECO
R
Nonestab
5) STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)[01]()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK
R
Nonestab
6) MS ROD 64MM IS-1570 GR.25C4 (0133005064)[01]()
Specification : MS ROD 64MM IS-1570 GR.25C4
R
Nonestab
7) MS PLATE 1MX1MX20MM SPECN.IS:226 (0133021021)[01]()
Specification : MILD STEEL PLATE SIZE 1M X 1M X 20MM THICK TO SPECN.IS:226
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) STEEL TUBE OD 180 / ID 155 MM CF MOTOR FOR RGB - 60()
EN 19
R
NOT ESTAB
Category : DP
Grade : III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0145061109 STRIP ST.COLD ROL 0.5MM THX190 MM W[01]()
Specification : MS PLATE OF SIZE-1100 X 100 X 10MM (IS 2062-1994 OF ANYGRADE)
C
Nonestab
2) 0133030113 MS PLATE SIZE 450 MM[01]()
Specification : MS PLATE OF SIZE 450 X 450 X 50MM (IS-2062-1994 OF ANYGRADE)
C
Nonestab
3) 0133030120 MS ROD SIZE 50MM DIA 100MM LENGTH[01]()
Specification : MS ROD OF SIZE 50MM DIA X 100MM LENGTH (IS-2062-1994 OF ANYGRADE)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) RAW MATERIAL OF BARREL ST ROD 40 MM DIA TO SPEC JSS 9510 06 2012 CODE REF B T I COND
Description : RAW MATERIAL OF BARREL ST ROD 40 MM DIA TO SPEC JSS 9510 06 2012 CODE REF B T I COND()
Specification : SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.
R
Estab
2) Steel Round 16mm Dia 1983 GD 420 S37 EN 56 C
Description : Steel Round 16mm Dia 1983 GD 420 S37 EN 56 C()
Specification : Steel Round 16mm Dia. 1983 GD. 420 S37. (EN 56 C)
R
Estab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 3 125MM IS 4431 14C14S14 LF 0112001004
Description : STEEL ROD 3 125MM IS 4431 14C14S14 LF 0112001004()
Specification : STEEL ROD 3.125+/-0.05MM DIA IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS TO SPECN.IS:4431-1978 REAFFIRMED 2004 GRADE 14C14S14 INCOLD DRAWN CONDITION.
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SHEET MS ITEM CODE 0121020016
Description : SHEET MS ITEM CODE 0121020016()
Specification : C.R. SHEETS TO SPECN: IS-513-2008 (FIFTH REVISION) (REAFFIRMED 2013)-DD ANNEALED AND SKIN PASSED CONDICTION 2500 MM X 1000 MM X 1.6 MM.
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Steel strip cold rolled closed annealed bright finished 3 56mm thick X 80mm wide in length of 2 mtrs LF0122223036
Description : Steel strip cold rolled closed annealed bright finished 3 56mm thick X 80mm wide in length of 2 mtrs LF0122223036()
Specification : Steel strip cold rolled closed annealed bright finished 3.56(+0.10/-0.00) mm thick X 80 +/-0.25mm wide in length of 2 mtrs to specn:- IS-513:2008 (Fifth Revision) Grade "DD" Temper 5(Annealed)
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) STEEL ROD DIA 10MM TO 300MM ( INCLUDING 220 MM DIA)()
Specification : MILD STEEL STRIP 100+/-1 MM WIDE x 26 BG (0.50MM) THICK IN ROLLS COLD DRAWN ANNEALED BEST SURFACE TYPE D MATT FINISHTO SPECN:-IS-513-2008 (FIFTH REVISION) WEIGHT OF EACH ROLLSHOULD BE BETWEEN 50 KG TO 100 KG.
C
Nonestab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) ST FLAT 40X52 MM
Description : ST FLAT 40X52 MM()
Specification : ST. FLAT 40X52 MM TO SPECN. BS : 970 : PT.1: 1983 GD. 835M15 (EN-39B) IN HOT ROLLED ANNEALED CONDITION. TEST PIECE IS TO BE TESTED IN BLANK CARBURISED CONDITION
Specification : STEEL STRIP 200+/-0.5 MM WIDE X 1.1+/-0.05 MM THICK TO SPECN IS-513-TYPE DD OR BS-1449 PT-I GR-3,CS OR CR
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025
Description : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025()
Specification : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION IS-2062:2011(7th REVISION) GRADE:E250 (QUALITY A)
Specification : STEEL STRIP 82+/-0.5 MM WIDE X 0.8+/-0.03 MM THICK TO SPECN:IS-513-TYPE-DD OR BS-1449-PT-I-CS-3 SEC-2.
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) TOOL ALLOYS & SPECIAL STEEL FOR SMALL ARMS()
AS PER SPECIFICATION
R
Estab.
Category : S
Grade : II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) TOOL ALLOYS & SPECIAL STEEL FOR SMALL ARMS[02]()
Specification : AS PER SPECIFICATION
R
Nonestab
2) ST RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION[03]()
Specification : ST.RD.22MM DIA IN HOT ROLLED & ANNEALED CONDITION TO SPECN IS:6527:1995,DESIGNATION X30CR 13 (FOR PLUG GAS).
R
Nonestab
3) ST FLAT SIZE 22 X 60MM[01]()
Specification : ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITIONTO SPECIFICATION BS:970:PT 1:1983 : GD 708M40,
R
Nonestab
4) ST ROUND 8 MM DIA[03]()
Specification : ST ROUND 8.00 MM DIA. TO SPECN. BS-970 PT.IIOF 1970 GD. 708 M40 (REQD.FOR-PIN FIRING OF 9MM CARBINE) ACCEPTANCE STANDARDS:MACRO ETCH TEST AS PER ASTME381 & NMIR TEST AS PER IS:4163-82
R
Nonestab
5) ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).[01]()
6) STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650 C[03]()
Specification : SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C.(REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907)
R
Estab
7) ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36[02]()
9) STEEL RD 45MM DIA IN HOT ROLLED AND ANNELED CONDITION FOR MAG[03]()
Specification : SPECNIS:5517-1993 DESIG.42CR4MO2.TEST PIECE TO BE TESTED IN`V' CONDITION.MATL. SHOULD ALSO SATISFY MACRO ETCH & NMIR TEST AS ANNEXURE NATURE-C A SEPERATE T.P. IS TO BE QUENCHED & TEMPERED BEFORE MACHINING TO ACHIEVE HARDNESS 280-335HB.
R
Nonestab
10) STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE[01]()
Specification : SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE
R
Nonestab
11) STEEL FLAT 22X18MM FOR MAG[04]()
Specification : SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2 (REQD.FOR LINK PISTON EXTN.OF MAG 7.62MM)
R
Nonestab
12) STEEL ROD 44 MM DIA FOR MAG[01]()
Specification : STEELROD 44+0.0/-0.50MM DIA.IN CUTLENGTHOF415+2.5/-00MM TO SP ECN.JSS:9510-06-2000,REV.NO.3 CODE REF.BIN T3 CONDITION WITH COMPOSITION RESTRICTED S%-0.010 MAX.P%-0.015 MAX.& (S+P)%-0. 022 MAX.FOR MAG 7.62MM.BARREL FOR OTHER PARAMETERS AS
R
Nonestab
13) STEEL FLAT 25X32MM[01]()
Specification : STEEL FLAT 25X32MM(1"X1-1/4")TO SPECN.BS:970:PT-1:1983 GD.080M40 IN HOT ROLLED & NORMALISED CONDITION. MATL TO BE TESTED AS PER ANNEXURE-C (REQD.FOR BAND FRONT SIGHT OF MAG 7.62MM)
R
Nonestab
14) STEEL SQR 37MM FOR MAG[03]()
Specification : SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION
16) STEEL ROD 14 MM DIA IN HOT ROLLED NORMALIZED CONDITION[02]()
Specification : SPECN.BS:970 PT-3:1991.GD 817M40 OR 826M40 TEST PIECE TO BE TESTED IN `Z' CONDITION.
R
Nonestab
17) STEEL ROUND 27 MM[70]()
Specification : STEEL ROUND 27 MM TO SPECN.IS:5517-1993 DEGIGNATION 55C8 IN ANNEALED & COLD DRAWN CONDN. (FOR SLEEVE LOCKING BIPOD).
R
Nonestab
18) STEEL FLAT 70 X 34 MM IN HOT ROLLED and ANNEALED CONDITION[01]()
Specification : SPECN.BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTEDAS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST &MICROSCOPIC NON-METALIC INCLUSION RATING AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265
20) STEEL RD 12MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40 (REQD.FOR EXTRACTOR PLUNGER OF MAG 7.62MM)[03]()
Specification : SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40
R
Nonestab
21) STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION[01]()
Specification : STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970:PT.1:SEC-2-1983 GD 080M40 TEST PIECE TO BE TESTED AS PER SPECIFIC.MATERIAL SHOULD ALSO SATISFY THE TEST AS LAID DOWN IN THE ANNEXURE.
R
Nonestab
22) STEEL RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.[02]()
Specification : SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.
R
Nonestab
23) STEEL RD 25MM DIA FOR MAG[03]()
Specification : SPECN.BS:970:PT-3:1991 GD.420S29 OR 431S29HARDENED & TEMPERED BARS TO HARDNESS 265-300 BHN.MACRO ETCH & NMIR TEST TO BE CARRIED OUT AS PER ANNEXURE NATURE `C'. (REQUIRED FOR GAS REGULATOR D S CAT NO. 1005-006614)
R
Nonestab
24) STEEL RD 8MM DIA FOR MAG[03]()
Specification : BS 970 PT 1:1983 GR 431 S-29 OR 20 S-37 EN 56C
R
Estab
25) STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3[03]()
Specification : STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.&
(S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS
R
Estab
26) STEEL ROD 32MM DIA[04]()
Specification : STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MAX,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE E
Specification : STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD)
R
Estab
Category : S
Grade : II
Size :
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) STEEL ROUND BAR IN DIFFERENT SIZES( 4MM TO 42MM DIA.)()
AS PER SPECIFICATION
R
Not Estab.
2) STEEL FLAT/BLANK IN DIFFERENT SIZES(16MMX35MMX630MM,5MMX5MMXLONG,14MMX6MMXLONG,36MMX36MMX600MM ETC.)()
AS PER SPECIFICATION
R
Not Estab.
3) STEEL STRIP IN DIFFERENT SIZES( 1MM TO 2MM)()
AS PER SPECIFICATION
R
Not Estab.
Category : S
Grade : III
Size :
O
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL STRIP 12 5 X 0 28 MM IS 6911 1992 LF 0323060012
Description : STEEL STRIP 12 5 X 0 28 MM IS 6911 1992 LF 0323060012()
Specification : STEEL STRIP 12.5 +/- 0.5MM WIDE X 0.28-0.02MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION IS-6911-2017 (2nd REVISION) AMENDMENT NO. 1 & 2 , Gr X04 Cr 19 Ni 9. EACH COIL WEIGHT 5-10 KG
R
Nonestab
2) STEEL STRIP 90X2MM IS 513 BS1449 LF 0101061544
Description : STEEL STRIP 90X2MM IS 513 BS1449 LF 0101061544()
Specification : STEEL STRIP 90+/-0.5mm WIDE X 2mm THICK TO SPECN-IS-513-2008(FIFTH REV.)GRD. DD OR EDD IN ANNEALED/SKIN PASSED CONDITIONOR BS-1449 Pt-I GR. 1 OR 2 OR 3 (CR/CS) IN ANNEALED/SKINPASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN(HR/
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) ST SQR 75MM TO SPECN BS 3S 144 1995[70]()
Specification : ST SQR.75 MM TO SPECN.BS:3S144:1995(1999)GD S144H
LFVD WITH CAL.SILICIDE TREATMENT.INCLUSION RATINGCHART
SECONDARY REFINING STEEL AS PER SPECN.IS:4163-82,i.e.THN/THK
SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICA
R
Nonestab
2) ST SQUARE 75 MM BS 3S144 1995 1999[70]()
Specification : STEEL SQR.75 MM TO SPECN.BS:3S144:1995(1999) GD.S144 D,
TEST CONDITION S144H.
Specification : 0329550050 ST.RD.50x2200TO SPCN.BS:3S144-95(99)GD-S144H TEST COND.S144H .LFVD(WITH CAL.SILICATE TREATMENT %OF SULPHUR & PHOS.NOT EXCEED 0.015 & 0.03.INCLUSION RATING SHOULD ALSO NOTEXCEED THE FOLLO.LIMIT SECONDARY REFINING ST.ASPERIS:4163
R
Nonestab
4) 0329580075 ST SQR 75MM TO SPECN BS 3S 144 1995[70]()
Specification : 0329580075 ST SQR.75 MM TO SPECN.BS:3S144:1995(1999)GD S144H LFVD WITH CAL.SILICIDE TREATMENT.INCLUSION RATINGCHART SECONDARY REFINING STEEL AS PER SPECN.IS:4163-82,i.e.THN/THK SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE:1.5-1, GLOBULAR OXIDE:2
R
Nonestab
5) STEEL ROUND 28 MM TO SPECIFICATION BS 3S144 1995 1999 GD S144H TEST CONDN S144H[70]()
Specification : STEEL ROUND 28 MM TO SPECIFICATION BS 3S144 1995 1999 GD S144H TEST CONDN S144H
R
Nonestab
6) STEEL ROUND 35MM DIA TO SPCN BS 3S144 1995 1999 d S144H[70]()
Specification : STEEL ROUND 35MM DIA TO SPCN BS 3S144 1995 1999 d S144H
R
Nonestab
7) ST SQR 75 MM TO SPECN BS 3S144 1995 1999 GD S144H LFVD WITH CAL SILICIDE TREATMENT INCLUSION RATINGCHART SECONDARY REFINING STEEL AS PER SPECN S 4163 82 i e THN THK SULPHIDE 1 5 1 ALUMINA 1 5 1 SILICATE 1 5 1 GLOBUL[70]()
Specification : ST SQR.75 MM TO SPECN.BS:3S144:1995(1999)GD S144H LFVD WITH CAL.SILICIDE TREATMENT.INCLUSION RATINGCHART SECONDARY REFINING STEEL AS PER SPECN.IS:4163-82,i.e.THN/THK SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE:1.5-1,GLOBULAR OXIDE: 2.0-1.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) STEEL FLAT 45X50 070M55 OR EN9 FOR MAG
Description : STEEL FLAT 45X50 070M55 OR EN9 FOR MAG()
Specification : STEEL FLAT TO SPECIFICATION IS:5517-1993 DESIGNATION 55C8 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION
R
Estab
Category : ddp
Grade : 3
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) STEEL BLANKS FOR ADAPTER[01]()
Specification : BS 970, Dt: 3 -1991, ASTM E 381 – 01, ASTM E 112 – 12, ASTM E 45 – 05 & IS: 8791 – 1978
R
Nonestab
2) STEEL BLANKS FOR BODY BASE OF RGB 60[01]()
Specification : BS 970, Dt: 3 -1991, ASTM E 381 – 01, ASTM E 112 – 12, ASTM E 45 – 05 & IS: 8791 – 1978
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) STEEL FLAT 45X50 070M55 OR EN9 FOR MAG
Description : STEEL FLAT 45X50 070M55 OR EN9 FOR MAG()
Specification : STEEL FLAT TO SPECIFICATION IS:5517-1993 DESIGNATION 55C8 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION
Specification : STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS) IN ANNEALED & SKIN PASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN (HR/HS) CON
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) ST ROD 42MM DIA
Description : ST ROD 42MM DIA()
Specification : ST.ROD 42MM DIA TO SPECIFICATION IS-4432-1988 GD-13NI 13 CR3 WITH RESTRICTIONS S%=0.010MAX.,P%=0.015MAX.&(S+P)%=0.022MAX. GROUND & POLISHED BEFORE ROLLING.NORMALISED & PICKLED.RING GRIND TESTED TO ENSURE FORGING QUALITY.04-06METERS LONG.O
R
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) STC RD 1 inch
Description : STC RD 1 inch()
Specification : STC RD 1"(25MM) DIA TEMP-B WITH THE FOLLOWING CHEMICAL COMPOSITION:-C%=1.15 TO 1.25 SI%=0.25 MAX., MN%-0.45 MAX., S&P%=0.035 MAX. OR AS PER IS-3749-1978 GRADE T-118
R
Estab
Category : ddp
Grade : 3
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) HR SHEET 4 MM X 1250 X 2500[90]()
Specification : HR SHEET 4.00MM ×1250×2500 IS 1079 GR "O" (SK)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) MS SHEET 2 MM THICK[90]()
Specification : MS SHEET 2.00 MM THICK × 1250 × 2500 MM IS-1079 GR O (SK) B.C. 01.3202.0020
R
Nonestab
2) HR SHEET 4 MM X 1250 X 2500[90]()
Specification : HR SHEET 4.00MM ×1250×2500 IS 1079 GR "O" (SK)
R
Nonestab
3) HR SHEET 3 POINT15 MM X 1250 X 2500[90]()
Specification : HR SHEET 3.15MM THICK ×1000/1250×2500 IS 5986, Fe 330 OR IS:1079 GR. "O"
R
Nonestab
4) CR SHEET[90]()
Specification : CR SHEET 1.60X1250X2500 MM IS: 513 GR "D" SK
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 7 MM IS 1875 GRD 20C8 LF 0101003008
Description : STEEL ROD 7 MM IS 1875 GRD 20C8 LF 0101003008()
Specification : STEEL ROD 7(+0.025,-0.075)MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN.IS:1875-1992 (REAFFIRMED-2004)(FIFTH -REVISION)AMENDMENT NO.1 JAN.1993 AND AMENDMENT NO.2 NOV.1994GRADE 20C8.
Specification : STEEL STRIP SIZE 40 +/-0.5 MM WIDE X 0.35 +/-0.03 MM THICK TO SPECN:IS-513-2008 (FIFTH REVISION) GR.CR-3 OR GD I CS OFBS-1449-SECTION 1.1:1991 QUALITY IN ANNEALED AND SKIN PASSED CONDITION IN COIL OF 50 KG WEIGHT EACH.
R
Estab
Category : s
Grade : 3
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) STEEL BLANK FOR NOZZLE PLATE FOR RGB 60[12]()
Specification : STEEL BLANK FOR NOZZLE PLATE FOR RGB 60 AS PER DRAWING NO. 0 RGB 060 1 182, AS PER LATEST REVISION
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL
R
Estab
2) M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL
R
Estab
3) MS ANGLE IRON 50x50x6MM[90]()
Specification : MS ANGLE IRON 50×50×6MM THICK IN LENGTH 5100 MM AS PER IS:2062
R
Estab
4) MS PLATE 16 MM IS 2062 GR B[90]()
Specification : MS PLATE 16 MM IS-2062 GR "B" SIZE: 16MM THICK × 1250 × 2500/2800 MM LONG
R
Estab
5) MS PLATE 25 MM THICK[90]()
Specification : MS PLATE 25 MM THICK × STD. SIZE SPECN: IS:1079, GR ST-42
R
Estab
6) STEEL ROD 45 MM DIA X 150 MM LENGTH[90]()
Specification : STEEL ROD 45 MM DIA×150MM LENGTH. SPECIFICATION EN-9 BS:970.
R
Estab
7) MS Angle 50x50x5 MM THICK[90]()
Specification : M.S. Angle (50x50x5) MM IN LENGTH OF 5 METR OR UNITS MULTIPLE LENGTH SPECN-IS:2062 GR"A"
R
Estab
8) BRIGHT BAR 55 DIA X 35 LENGTH IS 2073[90]()
Specification : BRIGHT BAR SIZE 55 DIA X 35 LENGTH IS:2073 (DRG. NO. 645-01-7321-1/C FOR FINISH COMPONENT)
R
Estab
9) FLAT 40 X 25 IN STD LENGT[90]()
Specification : FLAT 40 X 25 IN STD LENGT & SR 25 IS: 2062/1992
R
Estab
10) Bright Bar 45 dia X 85 length IS 2073[90]()
Specification : Bright Bar 45 dia X 85 length IS 2073
C
Estab
Category : s
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 14 MM DIA IN HOT ROLLED NORMALIZED CONDITION
Description : STEEL ROD 14 MM DIA IN HOT ROLLED NORMALIZED CONDITION()
Specification : SPECN.BS:970 PT-3:1991.GD 817M40 OR 826M40 TEST PIECE TO BE TESTED IN `Z' CONDITION.
R
Estab
2) STEEL ROD 44 MM DIA FOR MAG
Description : STEEL ROD 44 MM DIA FOR MAG()
Specification : STEELROD 44+0.0/-0.50MM DIA.IN CUTLENGTHOF415+2.5/-00MM TO SP ECN.JSS:9510-06-2000,REV.NO.3 CODE REF.BIN T3 CONDITION WITH COMPOSITION RESTRICTED S%-0.010 MAX.P%-0.015 MAX.& (S+P)%-0. 022 MAX.FOR MAG 7.62MM.BARREL FOR OTHER PARAMETERS AS
R
Estab
3) STEEL ROD 4 MM DIA
Description : STEEL ROD 4 MM DIA()
1) 9911847363 H C HCR ROUND 125 MM DIA X1500[99]()
Specification : AS PER SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 14 MM DIA IN HOT ROLLED NORMALIZED CONDITION
Description : STEEL ROD 14 MM DIA IN HOT ROLLED NORMALIZED CONDITION()
Specification : SPECN.BS:970 PT-3:1991.GD 817M40 OR 826M40 TEST PIECE TO BE TESTED IN `Z' CONDITION.
R
Estab
2) STEEL ROD 44 MM DIA FOR MAG
Description : STEEL ROD 44 MM DIA FOR MAG()
Specification : STEELROD 44+0.0/-0.50MM DIA.IN CUTLENGTHOF415+2.5/-00MM TO SP ECN.JSS:9510-06-2000,REV.NO.3 CODE REF.BIN T3 CONDITION WITH COMPOSITION RESTRICTED S%-0.010 MAX.P%-0.015 MAX.& (S+P)%-0. 022 MAX.FOR MAG 7.62MM.BARREL FOR OTHER PARAMETERS AS
R
Estab
3) STEEL ROD 4 MM DIA
Description : STEEL ROD 4 MM DIA()
1) STEEL BAR TO SPECN NO IS 4431 78 DESIGNATION 14C 14S14 COLD DRAWN IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22 MM DIA
Description : STEEL BAR TO SPECN NO IS 4431 78 DESIGNATION 14C 14S14 COLD DRAWN IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22 MM DIA()
Specification : STEEL BAR TO SPECN.NO.IS:4431-78 DESIGNATION 14C 14S14 (C/D) IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE 22 -0.052 MM DIA
R
Estab
2) hot rolled cold drawn carbon steel round to specn BS 970 Pt I 1983 grade O80M40 in straight length of 3 metres size 17mm minus 0 point 08 dia
Description : hot rolled cold drawn carbon steel round to specn BS 970 Pt I 1983 grade O80M40 in straight length of 3 metres size 17mm minus 0 point 08 dia()
Specification : HOT ROLLED COLD DRAWN CARBON STEEL ROUND TO SPECN BS:970-PT-I 1983 GRADE 080M40 IN STRAIGHT LENGTH OF 3 METRES(10 %MAX.SHORT DOWN TO 2-3 METRES PERMITTED) SIZE:17.00-0.08MM DIA
R
Estab
3) NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS 970 PT I 1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES SIZE 21MINUS 0POINT1MM DIA
Description : NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS 970 PT I 1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES SIZE 21MINUS 0POINT1MM DIA()
Specification : NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS:970-PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES,SIZE:21.00 - 0.1MM DIA. (10 % MAX.SHORT LENGTH OF 1.5 METRE ALLOWED.)
10) STEEL ROUND 6 POINT 5 MM 0 POINT 018 MM DIA BS 970 PART 1 80 M 50
Description : STEEL ROUND 6 POINT 5 MM 0 POINT 018 MM DIA BS 970 PART 1 80 M 50()
Specification : STEEL ROUND 6.5MM - 0.018 MM DIA ,BS 970 PART-1 80 M 50
R
Estab
11) STEEL ROUND 7 BY 8 INCH 22 MM DIA BS 970 EN 9
Description : STEEL ROUND 7 BY 8 INCH 22 MM DIA BS 970 EN 9()
12) STL ROD 22 MM DIA BS 970 PT 5 70 A 72 IS 4072 70 C 6
Description : STL ROD 22 MM DIA BS 970 PT 5 70 A 72 IS 4072 70 C 6()
Specification : STEEL ROD 22 MM DIA BS 970 PT 5, 70 A 72 / IS 4072, 70 C 6
R
Estab
13) ST ROD 120MM DIA X 1 MTR L IS 3748 1990 T 105 CR 5
Description : ST ROD 120MM DIA X 1 MTR L IS 3748 1990 T 105 CR 5()
Specification : ST. ROD 120MM DIA X 1 MTR(L) IS 3748:1990 T-105 CR-5
R
Estab
14) STEEL BLOCK 6 INCH SQUARE X 8 INCH LONG BS 970 EN 15
Description : STEEL BLOCK 6 INCH SQUARE X 8 INCH LONG BS 970 EN 15()
Specification : STEEL BLOCK 6" SQUARE X 8" LONG BS 970 EN-15
R
Estab
15) STEEL ROUND 22 MM DIA BS 970PT 1 1983 605 M 36
Description : STEEL ROUND 22 MM DIA BS 970PT 1 1983 605 M 36()
Specification : STEEL ROUND 22 MM DIA BS 970PT-1:1983 605 M-36
R
Estab
16) STEEL FLAT 2 INCH X 1 INCH TO SPECN IS 963 1958
Description : STEEL FLAT 2 INCH X 1 INCH TO SPECN IS 963 1958()
Specification : STEEL FLAT 2" X 1" TO SPECN IS-963-1958
R
Estab
17) STEEL ROUND 16 MM DIA BS 970 PT I 83 GDE 420 S 37
Description : STEEL ROUND 16 MM DIA BS 970 PT I 83 GDE 420 S 37()
Specification : STEEL ROUND 16 MM DIA BS 970 PT-I:'83 GDE 420 S 37
R
Estab
18) STEEL ROD 25 MM DIA SPCN IS 6603 1972 GR 40CR13
Description : STEEL ROD 25 MM DIA SPCN IS 6603 1972 GR 40CR13()
Specification : STEEL ROD 25 MM DIA SPCN IS 6603:1972 GR 40CR13
R
Estab
19) STEEL ROUND 3 BY 4 INCH DIA TO IS 6603 GR 40 CR 13
Description : STEEL ROUND 3 BY 4 INCH DIA TO IS 6603 GR 40 CR 13()
Specification : STEEL ROUND 3/4" DIA TO IS 6603 GR 40 CR-13
R
Estab
20) STEEL ROD 32 MM DIA SPCN IS 6603 2001 GDE 40 CR 13
Description : STEEL ROD 32 MM DIA SPCN IS 6603 2001 GDE 40 CR 13()
Specification : STEEL ROD 32 MM DIA SPCN IS 6603 2001 GDE 40 CR 13
R
Estab
21) STEEL ROUND 32MM DIA TO BS 970 EN 26 OR EN 36 B
Description : STEEL ROUND 32MM DIA TO BS 970 EN 26 OR EN 36 B()
Specification : STEEL ROUND 32MM DIA TO BS 970 EN-26 OR EN-36 B
R
Estab
22) STEEL ROD 32 MM DIA TO SPCN TY 14 1 2884 80 IN CD
Description : STEEL ROD 32 MM DIA TO SPCN TY 14 1 2884 80 IN CD()
Specification : STEEL ROD 32 MM DIA TO SPCN. TY:14-1-2884-80 IN CD
R
Estab
23) STEEL ROUND 32 MM DIA GRD 50 SPN TY 14 1 2884 80
Description : STEEL ROUND 32 MM DIA GRD 50 SPN TY 14 1 2884 80()
Specification : STEEL ROUND 32 MM DIA GRD 50 SPCN TY 14 1 2884 80
R
Estab
24) STEEL PIPE OD 70MM ID 40 MM TO IS 3074 05 DESIG C
Description : STEEL PIPE OD 70MM ID 40 MM TO IS 3074 05 DESIG C()
Specification : STEEL PIPE OD 70MM ID 40 MM TO IS :3074-05 DESIG C
R
Estab
25) STEEL ROUND 1 3 BY 4 INCHES DIA TO SPCN BS 970 EN 19T
Description : STEEL ROUND 1 3 BY 4 INCHES DIA TO SPCN BS 970 EN 19T()
Specification : STEEL ROUND 1 3/4'' DIA TO SPCN BS 970 EN -19T
R
Estab
26) STEEL ROUND 32 MM DIA BS 970 PT I 832 M 13
Description : STEEL ROUND 32 MM DIA BS 970 PT I 832 M 13()
Specification : STEEL ROUND 32 MM DIA BS 970 PT I 832 M 13
R
Estab
27) STEEL ROUND 48 MM DIA BS 970 PT I 832 M 13
Description : STEEL ROUND 48 MM DIA BS 970 PT I 832 M 13()
Specification : STEEL ROUND 48 MM DIA TO BS 970 PT-1 : 832 M-13
R
Estab
28) STEEL ROUND 3 POINT 5 MM PLUS MINUS 0 POINT 025 MM DIA LENGTH 1 MTR A
Description : STEEL ROUND 3 POINT 5 MM PLUS MINUS 0 POINT 025 MM DIA LENGTH 1 MTR A()
29) STEEL ROUND 80 MM DIA to spec 070 M 55 TO
Description : STEEL ROUND 80 MM DIA to spec 070 M 55 TO()
Specification : STEEL ROUND 80 MM +1 MM DIA TO SPECN. 070 M 55 TO BS-970:PT-1-1983 IN HOT ROLLED,PEELED & MAGNETICALLY CRACK DETECTION PASSED CONDN.END OF BAR SQUARE,YIED STREES-2% PRROF STRESS 650 MPA (MIN),ELONGATION-10% (MIN),LENGTH 1.2 MTR. OR IN MUL
R
Estab
30) STEEL RD 70 MM DIA TO BS 970 PT I 83 GDE 070 M 55
Description : STEEL RD 70 MM DIA TO BS 970 PT I 83 GDE 070 M 55()
Specification : STEEL RD 70 MM DIA TO BS 970 PT-I: 83 GDE 070 M 55
R
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL STRIP 40x0point35 mm LF 0121060051
Description : STEEL STRIP 40x0point35 mm LF 0121060051()
Specification : STEEL STRIP SIZE 40 +/-0.5 MM WIDE X 0.35 +/-0.03 MM THICK TO SPECN:IS-513-2008 (FIFTH REVISION) GR.CR-3 OR GD I CS OFBS-1449-SECTION 1.1:1991 QUALITY IN ANNEALED AND SKIN PASSED CONDITION IN COIL OF 50 KG WEIGHT EACH.
2) STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE
Description : STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE()
Specification : SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE
R
Estab
3) STEEL RD 8MM DIA FOR MAG
Description : STEEL RD 8MM DIA FOR MAG()
Specification : BS 970 PT 1:1983 GR 431 S-29 OR 20 S-37 EN 56C
R
Estab
4) Steel Strip
Description : Steel Strip()
Specification : Steel Strip Size :- 1,8MM THICK X270 MM WIDE X1600 MM LONG TO SPECN. IS:7226-1974 GRADE C-40. COLD ROLLED & ANNEALED CONDN.
Note: GRAIN DIRECTION SHOULD BE ALONG THE LENGTH
R
Estab
5) STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION
Description : STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION()
Specification : STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970:PT.1:SEC-2-1983 GD 080M40 TEST PIECE TO BE TESTED AS PER SPECIFIC.MATERIAL SHOULD ALSO SATISFY THE TEST AS LAID DOWN IN THE ANNEXURE.
R
Estab
6) STEEL RD 38MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN. IS:5517 -1993, DESIGNATION 40 C8
Description : STEEL RD 38MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN. IS:5517 -1993, DESIGNATION 40 C8()
9) STEEL RD 25MM DIA FOR MAG
Description : STEEL RD 25MM DIA FOR MAG()
Specification : SPECN.BS:970:PT-3:1991 GD.420S29 OR 431S29HARDENED & TEMPERED BARS TO HARDNESS 265-300 BHN.MACRO ETCH & NMIR TEST TO BE CARRIED OUT AS PER ANNEXURE NATURE `C'. (REQUIRED FOR GAS REGULATOR D S CAT NO. 1005-006614)
R
Estab
10) STEEL RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.
Description : STEEL RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.()
Specification : SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.
R
Estab
11) STEEL RD 25 MM DIA ( REQUIRED FOR GAS REGULATOR DS CAT NO. 1005-006614)
Description : STEEL RD 25 MM DIA ( REQUIRED FOR GAS REGULATOR DS CAT NO. 1005-006614)()
Specification : SPECN BS: 970:PT-3:1991 GD.420S29 OR 431 S29
R
Estab
12) STEEL FLAT 70 X 34 MM IN HOT ROLLED and ANNEALED CONDITION
Description : STEEL FLAT 70 X 34 MM IN HOT ROLLED and ANNEALED CONDITION()
Specification : SPECN.BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTEDAS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST &MICROSCOPIC NON-METALIC INCLUSION RATING AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265
R
Estab
13) STEEL SQR 37MM FOR MAG
Description : STEEL SQR 37MM FOR MAG()
Specification : SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION
R
Estab
14) STEEL ROD 35 MM DIA
Description : STEEL ROD 35 MM DIA()
Specification : STEEL RD. 35MM DIA +/- 0.25MM IN HOT ROLLED REELED,PEELED & ANNEALED CONDITION TO SPECN JSS:9510:06:2000(REV. NO.3)CODE REF.'B'.TEST PIECE TO BE TESTED IN 'T' CONDITION.MATERIAL SHOULD ALSO SATISY THE TEST AS PER ANNEXURE 'A' NATURE A A
R
Estab
15) RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.
Description : RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.()
Specification : SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.
R
Estab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).
Description : ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).()
2) STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE
Description : STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE()
Specification : SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE
R
Estab
3) STEEL RD 8MM DIA FOR MAG
Description : STEEL RD 8MM DIA FOR MAG()
Specification : BS 970 PT 1:1983 GR 431 S-29 OR 20 S-37 EN 56C
R
Estab
4) Steel Strip
Description : Steel Strip()
Specification : Steel Strip Size :- 1,8MM THICK X270 MM WIDE X1600 MM LONG TO SPECN. IS:7226-1974 GRADE C-40. COLD ROLLED & ANNEALED CONDN.
Note: GRAIN DIRECTION SHOULD BE ALONG THE LENGTH
R
Estab
5) STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION
Description : STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION()
Specification : STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970:PT.1:SEC-2-1983 GD 080M40 TEST PIECE TO BE TESTED AS PER SPECIFIC.MATERIAL SHOULD ALSO SATISFY THE TEST AS LAID DOWN IN THE ANNEXURE.
R
Estab
6) STEEL RD 38MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN. IS:5517 -1993, DESIGNATION 40 C8
Description : STEEL RD 38MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN. IS:5517 -1993, DESIGNATION 40 C8()
9) STEEL RD 25MM DIA FOR MAG
Description : STEEL RD 25MM DIA FOR MAG()
Specification : SPECN.BS:970:PT-3:1991 GD.420S29 OR 431S29HARDENED & TEMPERED BARS TO HARDNESS 265-300 BHN.MACRO ETCH & NMIR TEST TO BE CARRIED OUT AS PER ANNEXURE NATURE `C'. (REQUIRED FOR GAS REGULATOR D S CAT NO. 1005-006614)
R
Estab
10) STEEL RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.
Description : STEEL RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.()
Specification : SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.
R
Estab
11) STEEL RD 25 MM DIA ( REQUIRED FOR GAS REGULATOR DS CAT NO. 1005-006614)
Description : STEEL RD 25 MM DIA ( REQUIRED FOR GAS REGULATOR DS CAT NO. 1005-006614)()
Specification : SPECN BS: 970:PT-3:1991 GD.420S29 OR 431 S29
R
Estab
12) STEEL FLAT 70 X 34 MM IN HOT ROLLED and ANNEALED CONDITION
Description : STEEL FLAT 70 X 34 MM IN HOT ROLLED and ANNEALED CONDITION()
Specification : SPECN.BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTEDAS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST &MICROSCOPIC NON-METALIC INCLUSION RATING AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265
R
Estab
13) STEEL SQR 37MM FOR MAG
Description : STEEL SQR 37MM FOR MAG()
Specification : SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION
R
Estab
14) STEEL ROD 35 MM DIA
Description : STEEL ROD 35 MM DIA()
Specification : STEEL RD. 35MM DIA +/- 0.25MM IN HOT ROLLED REELED,PEELED & ANNEALED CONDITION TO SPECN JSS:9510:06:2000(REV. NO.3)CODE REF.'B'.TEST PIECE TO BE TESTED IN 'T' CONDITION.MATERIAL SHOULD ALSO SATISY THE TEST AS PER ANNEXURE 'A' NATURE A A
R
Estab
15) RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.
Description : RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.()
Specification : SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.
R
Estab
Category : ddp
Grade : 3
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 13 MM PLUS MINUS 0 POINT 1 MM DIA TO SPECN BS 970 PT 3 1991 STEEL GRADE 070 M 20 COLD DRAWN IN A LENGTH OF 2 POINT 5 MTRS TO 2 POINT 7 MTRS
Description : STEEL ROD 13 MM PLUS MINUS 0 POINT 1 MM DIA TO SPECN BS 970 PT 3 1991 STEEL GRADE 070 M 20 COLD DRAWN IN A LENGTH OF 2 POINT 5 MTRS TO 2 POINT 7 MTRS()
Specification : STEEL ROD 13 MM +/- 0.1 MM DIA TO SPECN BS-970 PT-3-1991 STEEL GRADE 070 M 20 COLD DRAWN IN A LENGTH OF 2.5 MTRS TO 2.7 MTRS
2) Steel Flat Size 6 X 22mm in Hot Rolled Normalised Condition for Revolver
Description : Steel Flat Size 6 X 22mm in Hot Rolled Normalised Condition for Revolver()
Specification : Steel Flat Size:- 6 X 22mm in Hot Rolled & Normalised Condn.To Specification Bs:970:Pt.1:1983:Gd.070m55. Material To Be Tested in Hardened & Tempered Condition as Per Ruling Section & Seperate Test Piece Need to be heat treated to achi
R
Estab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FLAT 125X 8X 530 MM LONG IN CUT LENGTH[01]()
Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE
SS +/-0.25MM.
4) SET OF CARRIER 4A/L & CARRIER 5A/L (9911358263)()
SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIER-5A/L (STEEL) TO
C
NOT ESTABLISHED
5) CATCH LOCK ASSY DRG NO.IA-1053 4 CO (9911358061)()
CATCH LOCK ASSY AS PER DRG.NO. IA-1053 SHT 1, SHT 2, SHT 3, SHT 4 & SHT 5 SET OF 4 COMPONENTS (ONE EACH) 1 CATCH, 2-LINK, 3-HOOK PLATE, 4-HASP
C
NOT ESTABLISHED
Category : P
Grade : II
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CATCH LOCK ASSY DRG NO.IA-1053 4 CO (9911358061)[65]()
Specification : CATCH LOCK ASSY AS PER DRG NO. IA-1053 SHT 1, SHT 2, SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH, 2-LINK, 3-HOOK PLATE, 4-HASP
R
Nonestab
2) BOX C-235 (STEEL) FOR BOMB 25 LBS (6570190100)[65]()
3) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)[65]()
Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG. LIST NO. ARM-1253 NO. OF SHEETS-3, SHEET-1 R.NO. 9 DT. 7/03/02 SHEET-2 R.NO. 5 DT. 31/07/96 SHEET-3 R.NO. NIL DT. 2/3/98 TO DRG.NO. ARM-1253-D1 (WITHOUT FITMENTS) R.NO. 6 DT. 27/06/96 SPECN: IA-1169
R
Nonestab
4) SET OF CARRIER 4A/L & CARRIER 5A/L (9911358263)[65]()
Specification : SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIE
Specification : SEAMLESS STEEL TUBE (PIPE)O/D 12+/-0.1MM X 10+/-0.1MM I/D STRAIGHT LENGTH OF 2.5 TO 3.00 MTRS TO SPECN:IS-3074-2005(SECOND REV.) AMDTS.NO.1 OF FEB.2006 AND NO.2 OF JUNE 2010GR-CDS-2 AS DRAWN & NORMALISED WITH Rm 35kg/Sqr.mm, Min Ag24% MIN
Specification : STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS)
R
Nonestab
3) STEEL ROD 21MM IS4431 GR 14 C14 S14 LF 0111000021
Description : STEEL ROD 21MM IS4431 GR 14 C14 S14 LF 0111000021()
Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.
28) M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL
R
Nonestab
29) M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL
R
Nonestab
30) M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL
R
Nonestab
31) HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W)[90]()
Specification : HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W) MAKE LISPARTS PT. NO. LHLT-201LH OR LUMAX PT NO. 005-HLA-L
C
Nonestab
32) HEX HEAD HIGH TENSILE BOLT[90]()
Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL
C
Nonestab
33) Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile[90]()
Specification : Hex bolt 3/8 UNF 1 1/2" Bolt with sun lock nut and spring washer, high tensile.
E
Nonestab
34) GUARD FOG LAMP[90]()
Specification : GUARD FOG LAMP PART NO. X1100814-VI
C
Nonestab
35) BRACKET CRANK ARM[90]()
Specification : BRACKET CRANK ARM DRG.NO. AMBV/00800-A
C
Estab
36) PIVOT FOR RACE RING ASSY FOR MPV FINISH[90]()
Specification : PIVOT FOR RACE RING ASSY FOR MPV (FINISH). DRG.NO. 645-01-7318-1/B.
C
Nonestab
37) SPECIAL HINGE[90]()
Specification : SPECIAL HINGE 700-10-1267/B
C
Nonestab
38) TORSION BAR[90]()
Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C
C
Estab
39) HINGE ASSY LOAD BODY LADDER[90]()
Specification : HINGE ASSY LOAD BODY (LADDER) HINGE ASSY LOAD BODY DRG.NO.VFJ/17/09/00004
Specification : PIN FOR MPV / STEEL ROD 45 DIA EN 9/BS 97/C
C
Estab
72) HEX HEADED BOLT M6 1 1 12 MM[90]()
Specification : HEX HEADED BOLT M6X1X12 MM TO IS:1364 (PART-1) 8.8-BL
C
Nonestab
73) HEX HEADED BOLT M 20 45 MM[90]()
Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT
C
Nonestab
74) HINGE FORGING[90]()
Specification : HINGE(FORGING) DRG NO 765-50-2447-A
C
Nonestab
75) PARTITION PLATE DRIVER SIDE[90]()
Specification : PARTITION PLATE (DRIVER SIDE) DRG NO 115-31-0012-1
C
Estab
76) PUNCHED WASHER TYPE B[90]()
Specification : PUNCHED WASHER TYPE B (6.6 X 11X 1.6) IS: 2016 STEEL CD PLATED
C
Nonestab
77) Catch oblique Hook Steel IS 4365 4379[90]()
Specification : Catch/Hook Steel IS 4365-4379
C
Nonestab
78) Eye 765 58 193 A[90]()
Specification : Eye 765-58-193/A
C
Estab
79) BRIGHT BAR 55 DIA X 35 LENGTH IS 2073[90]()
Specification : BRIGHT BAR SIZE 55 DIA X 35 LENGTH IS:2073 (DRG. NO. 645-01-7321-1/C FOR FINISH COMPONENT)
R
Estab
80) M S BLOCK 65X173X185[90]()
Specification : M. S. BLOCK SIZE- 65X173X185 FOR BRACKET LHS & RHS TO PART NO. 610-03-1202L-1/C & 610-03-1202L-1/A
28) M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL
R
Estab
29) M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL
R
Estab
30) M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL
R
Estab
31) HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W)[90]()
Specification : HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W) MAKE LISPARTS PT. NO. LHLT-201LH OR LUMAX PT NO. 005-HLA-L
C
Estab
32) HEX HEAD HIGH TENSILE BOLT[90]()
Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL
C
Estab
33) Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile[90]()
Specification : Hex bolt 3/8 UNF 1 1/2" Bolt with sun lock nut and spring washer, high tensile.
E
Estab
34) GUARD FOG LAMP[90]()
Specification : GUARD FOG LAMP PART NO. X1100814-VI
C
Estab
35) BRACKET CRANK ARM[90]()
Specification : BRACKET CRANK ARM DRG.NO. AMBV/00800-A
C
Estab
36) PIVOT FOR RACE RING ASSY FOR MPV FINISH[90]()
Specification : PIVOT FOR RACE RING ASSY FOR MPV (FINISH). DRG.NO. 645-01-7318-1/B.
C
Estab
37) SPECIAL HINGE[90]()
Specification : SPECIAL HINGE 700-10-1267/B
C
Estab
38) TORSION BAR[90]()
Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C
C
Estab
39) HINGE ASSY LOAD BODY LADDER[90]()
Specification : HINGE ASSY LOAD BODY (LADDER) HINGE ASSY LOAD BODY DRG.NO.VFJ/17/09/00004
Specification : PIN FOR MPV / STEEL ROD 45 DIA EN 9/BS 97/C
C
Estab
72) HEX HEADED BOLT M6 1 1 12 MM[90]()
Specification : HEX HEADED BOLT M6X1X12 MM TO IS:1364 (PART-1) 8.8-BL
C
Estab
73) HEX HEADED BOLT M 20 45 MM[90]()
Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT
C
Estab
74) HINGE FORGING[90]()
Specification : HINGE(FORGING) DRG NO 765-50-2447-A
C
Estab
75) PARTITION PLATE DRIVER SIDE[90]()
Specification : PARTITION PLATE (DRIVER SIDE) DRG NO 115-31-0012-1
C
Estab
76) PUNCHED WASHER TYPE B[90]()
Specification : PUNCHED WASHER TYPE B (6.6 X 11X 1.6) IS: 2016 STEEL CD PLATED
C
Estab
77) Catch oblique Hook Steel IS 4365 4379[90]()
Specification : Catch/Hook Steel IS 4365-4379
C
Estab
78) Eye 765 58 193 A[90]()
Specification : Eye 765-58-193/A
C
Estab
79) BRIGHT BAR 55 DIA X 35 LENGTH IS 2073[90]()
Specification : BRIGHT BAR SIZE 55 DIA X 35 LENGTH IS:2073 (DRG. NO. 645-01-7321-1/C FOR FINISH COMPONENT)
R
Estab
80) M S BLOCK 65X173X185[90]()
Specification : M. S. BLOCK SIZE- 65X173X185 FOR BRACKET LHS & RHS TO PART NO. 610-03-1202L-1/C & 610-03-1202L-1/A
28) M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL
R
Nonestab
29) M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL
R
Nonestab
30) M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL
R
Nonestab
31) HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W)[90]()
Specification : HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W) MAKE LISPARTS PT. NO. LHLT-201LH OR LUMAX PT NO. 005-HLA-L
C
Nonestab
32) HEX HEAD HIGH TENSILE BOLT[90]()
Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL
C
Nonestab
33) Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile[90]()
Specification : Hex bolt 3/8 UNF 1 1/2" Bolt with sun lock nut and spring washer, high tensile.
E
Nonestab
34) GUARD FOG LAMP[90]()
Specification : GUARD FOG LAMP PART NO. X1100814-VI
C
Nonestab
35) BRACKET CRANK ARM[90]()
Specification : BRACKET CRANK ARM DRG.NO. AMBV/00800-A
C
Estab
36) PIVOT FOR RACE RING ASSY FOR MPV FINISH[90]()
Specification : PIVOT FOR RACE RING ASSY FOR MPV (FINISH). DRG.NO. 645-01-7318-1/B.
C
Estab
37) SPECIAL HINGE[90]()
Specification : SPECIAL HINGE 700-10-1267/B
C
Nonestab
38) TORSION BAR[90]()
Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C
C
Estab
39) HINGE ASSY LOAD BODY LADDER[90]()
Specification : HINGE ASSY LOAD BODY (LADDER) HINGE ASSY LOAD BODY DRG.NO.VFJ/17/09/00004
Specification : PIN FOR MPV / STEEL ROD 45 DIA EN 9/BS 97/C
C
Estab
72) HEX HEADED BOLT M6 1 1 12 MM[90]()
Specification : HEX HEADED BOLT M6X1X12 MM TO IS:1364 (PART-1) 8.8-BL
C
Nonestab
73) HEX HEADED BOLT M 20 45 MM[90]()
Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT
C
Nonestab
74) HINGE FORGING[90]()
Specification : HINGE(FORGING) DRG NO 765-50-2447-A
C
Nonestab
75) PARTITION PLATE DRIVER SIDE[90]()
Specification : PARTITION PLATE (DRIVER SIDE) DRG NO 115-31-0012-1
C
Estab
76) PUNCHED WASHER TYPE B[90]()
Specification : PUNCHED WASHER TYPE B (6.6 X 11X 1.6) IS: 2016 STEEL CD PLATED
C
Estab
77) Catch oblique Hook Steel IS 4365 4379[90]()
Specification : Catch/Hook Steel IS 4365-4379
C
Nonestab
78) Eye 765 58 193 A[90]()
Specification : Eye 765-58-193/A
C
Estab
79) BRIGHT BAR 55 DIA X 35 LENGTH IS 2073[90]()
Specification : BRIGHT BAR SIZE 55 DIA X 35 LENGTH IS:2073 (DRG. NO. 645-01-7321-1/C FOR FINISH COMPONENT)
R
Estab
80) M S BLOCK 65X173X185[90]()
Specification : M. S. BLOCK SIZE- 65X173X185 FOR BRACKET LHS & RHS TO PART NO. 610-03-1202L-1/C & 610-03-1202L-1/A
9) SPARE WHEEL CARRIER ASSY WITHOUT REDUCTION GEAR BOX[90]()
Specification : SPARE WHEEL CARRIER ASSY. W/O SPARE WHEEL CARRIER ASSY. PART NO. A0909100 WITHOUT REDUCTION GEAR BOX TO (PART NO. X3917700 CONSISTING OF 60 ITEM AS PER LIST ENCLOSED. N/A
C
Nonestab
10) Drinking Water Tank Part No X4110910E for Stallion[90]()
Specification : S/A OF FUEL TANK-RH (160 LITRE) PT.NO.B5028201-V2
C
Nonestab
56) S A OF FUEL TANK LH 160 LITRE[90]()
Specification : S/A OF FUEL TANK-LH(160 LITRE) PT.NO.B5028202-[V2]
C
Nonestab
57) Spherical Seat PART NO X4904215[90]()
Specification : BUSH BOLT SPHERICAL SEAT DRG./PART NO.X-4904215-HASE
C
Nonestab
58) Black Out Head Lamp X2310500[90]()
Specification : BLACK OUT HEAD LAMP BLACK OUT HEAD LAMP PT.NO.X2310500-A
C
Estab
59) Black Out Stop Lamp X2310300[90]()
Specification : BLACK OUT STOP LAMP BLACK OUT STOP LAMP PT. NO.X2310300-A AXLE FLOOD LAMP. X2310200-A
C
Nonestab
60) Adaptor F7885500[90]()
Specification : ADAPTOR ADAPTOR DRG.NO. F7885300-H PART NO. F 7885500-H.
C
Nonestab
61) Adaptor F0122615[90]()
Specification : ADAPTOR (102-18) ADAPTOR DRG./PART NO. X 0122615 A
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA ASSY BUMPER FRONT[90]()
Specification : ASSY BUMPER FRONT
C
Estab
2) LPTA Assy Mounting Spare Wheel Carrier[90]()
Specification : ASSY MTG SPARE WHEEL CARRIER (WITHOUT LIFTING UNIT) (CONSISTING OF COMPONENTS AS PER LIST ATTACHED)
C
Nonestab
3) LPTA Assy Spare wheel lifting Unit[90]()
Specification : ASSY SPARE WHEEL LIFTING UNIT - COMPLETE INCLUDING ASSEMBLY HANDLE AND ROPE TO DRG. NO. CONSISTING OF DRGS. AS PER LIST ATTACHED.
C
Nonestab
4) LPTA Hex Nut M16 X 2[90]()
Specification : HEX NUT M16X2 GALVD. & YELLOW PASSIVATED IS - 1364-1992 PT. 111-P8
C
Nonestab
5) LPTA Key Ring with Plate[90]()
Specification : KEY RING WITH PLATE FOR LPTA
C
Nonestab
6) LPTA LPTA LOAD BODY[90]()
Specification : LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL
C
Estab
7) LPTA PLAIN NUT M12X15[90]()
Specification : PLAIN NUT M12 X 1.5 (108-00) GALV. & YELLOW PASSIVATED PART NO. L-3021218 TO IS -1364-1992 PART - 3.P.8
C
Nonestab
8) LPTA PLAIN NUT M12 X 1 75[90]()
Specification : PLAIN NUT M12 X 1.75 GALV. & YELLOW PASSIVATED DRG./PART NO. L-3011218 IS -1364-1992 PART - 3, P-8
Specification : SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET
C
Nonestab
12) LPTA Stud for water Tank[90]()
Specification : STUD FOR WATER TANK FITMONT (4/SET) 2614 7061 8801 NOTE: - TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION
C
Estab
13) LPTA Stud Front[90]()
Specification : STUD FRONT 2154 7061 8801N NOTE:- TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION
C
Estab
14) LPTA Stud Rear[90]()
Specification : STUD REAR (M12X260 LENGTH) PART NO. 215470618802N NOTE:- TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION
C
Estab
15) LPTA Vehicle Identification plate[90]()
Specification : VEHICLE IDENTIFICATION PLATE FOR LPTA 715TC/32 BS-III VEHICLE
C
Nonestab
16) LPTA VFJ Name Plate and Logo in Hindi[90]()
Specification : VFJ Name Plate & Logo in Hindi
C
Nonestab
17) LPTA ASSY TAIL LAMP BRACKET[90]()
Specification : ASSY TAIL LAMP BKT. DRG NO.261454400108 COSTING OF PT.NO/DRG NO.261454400110,ASSY GRILL GUARD TO DRG.NO.222654400101(b) MOUNTING BKT TO DRG NO.2226542008201a TWONOS EACH) BKT TO DRG. NO.261454408209, BKT.261454408208, CHANNEL 26145440820
C
Estab
18) LPTA ASSY FUEL TANK COMPLETE[90]()
Specification : ASSY FUEL TANK COMPLETE 2154 4750 0102-V2 WITH ASSY DIP STICK PTNO.261447100211 FLOAT VALVE DRG.0005420.204J (215447500101(V-2) ASSY.AIR BREATHER PTNO 2574 2815 9901 & SUCTION TUBE WITH FUEL TANK(275147100106)
C
Estab
19) LPTA ASSY TOWING HOOK FT[90]()
Specification : ASSY.TOWING HOOK FT. PT.NO.0125200096J-N-B5200401
C
Nonestab
20) LPTA ASSY SPACER BLOCK[90]()
Specification : ASSY.SPACER BLOCK PT NO 9051200000-V3
C
Nonestab
21) LPTA GUIDE PLATE FRONT[90]()
Specification : GUIDE PLATE CAST FRONT IPL-BS -III-LPTA-715 IPL SL.NO.03 OF SPRNG & SUSPENSION ITEM 042-322-0024Jb(FRONT SPRING U BOLT)
C
Nonestab
22) LPTA Steel Rod 18 MM[90]()
Specification : Steel Rod 18 MM Dia SPECN 15CR 3 SS 4028
R
Nonestab
23) LPTA Steel Rod 24 MM[90]()
Specification : Steel Rod 24 MM Dia SPECN 45C8 SS 4028
C
Nonestab
24) LPTA Oil Seal Rear[90]()
Specification : AGB Rear Oil Seal 2574 2820 7803 NR (IPL-AGB/61)
C
Nonestab
25) LPTA Seal Holder Inner[90]()
Specification : Seal Holder Inner
C
Nonestab
26) LPTA Seal Holder Outer[90]()
Specification : Seal Holder Outer
C
Nonestab
27) LPTA Hex Bolt M 14x1x30[90]()
Specification : Hex Bolt M 14x1x30
C
Nonestab
28) LPTA Coller Nuts Hex Bolt M35x1 5[90]()
Specification : Coller Nut / Hex Nut M35x1.5
C
Nonestab
29) LPTA Dust Cover Press Fit[90]()
Specification : Dust Cover (Press Fit) Part No 2732 3530 8201 b
C
Estab
30) LPTA Dust Cover Pinion[90]()
Specification : Dust Cover Pinion
C
Estab
31) LPTA Cross Tube[90]()
Specification : Assy Cross Tube(Torsion Bar)RHD
C
Nonestab
32) LPTA Air Tank[90]()
Specification : Kit Assy Air Tank consisting of 08 items (Voss).BS-III.
Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT
C
Estab
124) LOWER STEEL ROD[90]()
Specification : LOWER STEEL ROD AS PER DRG. NO. 645-01-1320-1/A , MATERIAL STEEL BAR
C
Estab
125) PARTITION PLATE CO DRIVER SIDE DRG NO 620 07 2004 1 E[90]()
Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT
C
Estab
124) LOWER STEEL ROD[90]()
Specification : LOWER STEEL ROD AS PER DRG. NO. 645-01-1320-1/A , MATERIAL STEEL BAR
C
Estab
125) PARTITION PLATE CO DRIVER SIDE DRG NO 620 07 2004 1 E[90]()
2) PLAIN NUT M5 IS1364 PART III P 8 GALVD AND YELLOW PASSIVATED L3010518
Description : PLAIN NUT M5 IS1364 PART III P 8 GALVD AND YELLOW PASSIVATED L3010518()
CRATE WOOD 12-A TO DRG.PT.NO. ISV-483-A DC NO. 36999-A DATED 02/02/2005 SPECN:- IA-948 (a,k) DC (I) 36868-A, AIDE MEMOIRE W/4
C
NOT ESTABLISHED
2) CRATE 13A WOODEN ISV-948 (6574380000)()
CRATE, WOOD 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4
C
NOT ESTABLISHED
3) PLATE ANGLE 64MMX64MM FOR CRATES (9911358104)()
PLATE ANGLE 64MM X 64MM TO DRG. PART NO. ISV 8 DC NO.35855-A DT. 23/11/1994 FOR WOODEN CRATE-12A AND CRATE-13A AND BOX-S2 MK1
C
NOT ESTABLISHED
Category : P
Grade : III
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) SLAB DEMOLITION BOX()
DRG.NO.IND/ME/58
C
NOT ESTAB
2) PEK-1 BOX()
DRG.NO.IND/ME/55
C
NOT ESTAB
Category : P
Grade : II
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) AMMN. CONTAINER BOX M 41A (WOOD)[14]()
Specification : AMMN. CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS TO DRG.PT.NO.ISV 587 A, DC.37127-A, DT.30.07.2007
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) BOX-UNIT LOAD FOR 155MM SHELL M107
Description : BOX-UNIT LOAD FOR 155MM SHELL M107()
Specification : DRG.NO. 3058086, WITH LATEST DC(I) 36820-A, DT.16.03.2002.
C
Estab
2) MOP.12 SHELLS 155MM B/T ON PELLET WITHOUT GRUMET
Description : MOP.12 SHELLS 155MM B/T ON PELLET WITHOUT GRUMET()
Specification : DRG.NO:155-1000(M) (UNIT LOAD) CONSISTING OF PALLET TO DRG. NO. 155-1210(M), FRAME ASSEMBLY TO DRG. NO.155-1230(M) DC NO.37126-A, DT.25.07.07.
1) All types of Electrodes. This includes the electrodes using by GCF()
As per GCF Specification/Drg./Size/Specn
E
Not Estab
Category : P
Grade : III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) WELDING ELECTRODES SIZE: 3.15 MM[90]()
Specification : CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE
P
Estab
2) WELDING ELECTRODES SIZE: 4 MM[90]()
Specification : CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION
P
Estab
3) WELDING ELECTRODES SIZE: 5 MM[90]()
Specification : CQA (M) 57 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION
P
Estab
4) M S WELDING ELECTRODE[90]()
Specification : M.S.WELDING ELECTRODE MEDIUM COATED TO SIZE 3.15MM X 350 MM LONG CONFORMING TO IS SPECN 814-1991 AND CODING ER-4211
P
Estab
Category : p
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
[ENR Registration]
Name
Specification
Use
Status
1) COATED METALLIC ELECTRODES to 1785950140
Description : COATED METALLIC ELECTRODES to 1785950140()
Specification : CQA(M):(4.00X350)
R
Estab
2) COATED METALLIC ELECTRODES OF 18 CR 8 NI 6 MN FOR WELDING SPADE ARMOUR PLATES ON FIGHTING VEHICLE TO 1785950150
Description : COATED METALLIC ELECTRODES OF 18 CR 8 NI 6 MN FOR WELDING SPADE ARMOUR PLATES ON FIGHTING VEHICLE TO 1785950150()
Specification : CQA(M):(5.00X350)
R
Estab
3) DIA 1 2 MM SOLID WIRE COPPER COATED LOW to 1787050612
Description : DIA 1 2 MM SOLID WIRE COPPER COATED LOW to 1787050612()
1) Hydraulic Power Unit(Includes Hydraulic Cylinder) of Capacity up to 600 bar()
As per GCF Specification/Drg./Size/Specn
E
Not Estab
2) Forced Lubrication System of Capacity up to 16 bar()
As per GCF Specification/Drg./Size/Specn
E
Not Estab
Category : P
Grade : III
Size :
S
632
SRI KALISWARI METAL POWDERS PRIVATE LIMITED
5A, CHAIRMAN A. SHUNMUGA NADAR ROAD MEPCO POST SIVAKASI, VIRUDHUNAGAR Tamil Nadu
PIN1 : 626123
Phone No. : 234300 GSTIN : 33AABCS5354H1ZH
Specification : ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS.
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ALUMINIUM POWDER HEAVY GR 1 125 MICRON 1001017163[10]()
Specification : JSS-1370-03:2007 REVISION NO (3)
R
Nonestab
Category :
Grade : Grade III
Size :
M
633
SAMCO METALS AND ALLOYS PVT LTD
KANIYAMBADI KANIYAMBADI VELLORE Tamil Nadu
PIN1 : 632102
Phone No. : 2230221 GSTIN : 33AAACS3109F1ZX
Specification : TRIGGER(FORGING DRAWING) FOR 7.62MM ASSAULT RIFLE AS PER DRG NO. RFI SK NO.9504-AR
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) TRIGGER FORGING FOR GHAATAK[70]()
Specification : TRIGGER(FORGING DRAWING) FOR 7.62MM ASSAULT RIFLE AS PER DRG NO. RFI SK NO.9504-AR
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) TRIGGER FORGING FOR GHAATAK[70]()
Specification : TRIGGER(FORGING DRAWING) FOR 7.62MM ASSAULT RIFLE AS PER DRG NO. RFI SK NO.9504-AR
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF PISTON EXTENSION FOR GHAATAK[70]()
Specification : FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF PISTON EXTENSION FOR GHAATAK[70]()
Specification : FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF PISTON EXTENSION FOR GHAATAK[70]()
Specification : FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) DOUBLE BARREL FORGING[70]()
Specification : DOUBLE BARREL FORGING TO DRG.NO RFI SK 2254* FOR PISTOL AUTO9MM 1A.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) DOUBLE BARREL FORGING[70]()
Specification : DOUBLE BARREL FORGING TO DRG.NO RFI SK 2254* FOR PISTOL AUTO9MM 1A.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) DOUBLE BARREL FORGING[70]()
Specification : DOUBLE BARREL FORGING TO DRG.NO RFI SK 2254* FOR PISTOL AUTO9MM 1A.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) DOUBLE BARREL FORGING for 9mm Auto Pistol[7015800015]()
Specification : DOUBLE BARREL FORGING for 9mm Auto Pistol
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) DOUBLE BARREL FORGING for 9mm Auto Pistol[7015800015]()
Specification : DOUBLE BARREL FORGING for 9mm Auto Pistol
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) DOUBLE BARREL FORGING for 9mm Auto Pistol[7015800015]()
Specification : DOUBLE BARREL FORGING for 9mm Auto Pistol
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF SLIDE FOR PISTOL AUTO 9MM 1A[70]()
Specification : FORGING OF SLIDE FOR PISTOL AUTO 9MM 1A.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF SLIDE FOR PISTOL AUTO 9MM 1A[70]()
Specification : FORGING OF SLIDE FOR PISTOL AUTO 9MM 1A.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF SLIDE FOR PISTOL AUTO 9MM 1A[70]()
Specification : FORGING OF SLIDE FOR PISTOL AUTO 9MM 1A.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) TRIGGER FORGING FOR ASSAULT RIFLE GHAATAK[7020300285]()
Specification : TRIGGER FORGING FOR ASSAULT RIFLE GHAATAK
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) TRIGGER FORGING FOR ASSAULT RIFLE GHAATAK[7020300285]()
Specification : TRIGGER FORGING FOR ASSAULT RIFLE GHAATAK
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) TRIGGER FORGING FOR ASSAULT RIFLE GHAATAK[7020300285]()
Specification : TRIGGER FORGING FOR ASSAULT RIFLE GHAATAK
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 7110302037 FORGING FOR HUB CARRIER TO DRG NO P155 HRG 1001 3 FOR PROJECT DHANUSH[71]()
Specification : AS PER DRG. NO: P155-HRG-1001-3
R
Nonestab
2) 7110302034 FORGING FOR PLANETARY PINION TO DRG NO P155 HRG 3002 3 FOR PROJECT DHANUSH[71]()
Specification : FORGING FOR PLANETARY PINION TO DRG. NO: P155-HRG-3002-3 FOR PROJECT DHANUSH.
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 7110302037 FORGING FOR HUB CARRIER TO DRG NO P155 HRG 1001 3 FOR PROJECT DHANUSH[71]()
Specification : AS PER DRG. NO: P155-HRG-1001-3
R
Nonestab
2) 7110302034 FORGING FOR PLANETARY PINION TO DRG NO P155 HRG 3002 3 FOR PROJECT DHANUSH[71]()
Specification : FORGING FOR PLANETARY PINION TO DRG. NO: P155-HRG-3002-3 FOR PROJECT DHANUSH.
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 7110302037 FORGING FOR HUB CARRIER TO DRG NO P155 HRG 1001 3 FOR PROJECT DHANUSH[71]()
Specification : AS PER DRG. NO: P155-HRG-1001-3
R
Nonestab
2) 7110302034 FORGING FOR PLANETARY PINION TO DRG NO P155 HRG 3002 3 FOR PROJECT DHANUSH[71]()
Specification : FORGING FOR PLANETARY PINION TO DRG. NO: P155-HRG-3002-3 FOR PROJECT DHANUSH.
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) TOOTHED RIM TO 3901011026[39]()
Specification : 188.11.002/F
R
Nonestab
2) MOVABLE RACE RING FORGING TO 3901011048[39]()
Specification : 447A.11.016/F
C
Nonestab
3) RH DRUM TO 3901040034[39]()
Specification : 172.40.300/F
R
Nonestab
4) DRUM RH FORGING TO 3901040036[39]()
Specification : 172.40.302/F
R
Nonestab
5) BOOSTER FORGING TO 3901040054[39]()
Specification : 172.40.321/F
R
Nonestab
6) INNER BOOSTER FORGING TO 3901040055[39]()
Specification : 172.40.322/F
R
Nonestab
7) RH EXTREME ENGAGING RING FORGING TO 3901040061[39]()
Specification : 172.40.328/F
R
Nonestab
8) RH MIDDLE ENGAGING RING FORGING TO 3901040062[39]()
Specification : 3901040062
R
Nonestab
9) R H FRONT FLANGE TO 3901040104[39]()
Specification : 172.40.364/F
C
Nonestab
10) L H FRONT FLANGE TO 3901040106[39]()
Specification : 172.40.365/F
R
Nonestab
11) RING RACE LOWER TO 3901212010[39]()
Specification : 172.12.015/F
R
Nonestab
12) RING RACE UPPER TO 3901212011[39]()
Specification : 188.12.002/F
R
Nonestab
13) MOVABLE RACE RING TO 3906109014[39]()
Specification : 172.11.067/F
R
Nonestab
14) RING TO 3906109020[39]()
Specification : 172.11.073/F
R
Nonestab
15) GEAR RIM TO 3906109067[39]()
Specification : 172.11.129/F
R
Nonestab
16) BLANK SIZE FOR RING RACE LOWER TO 3906111026[39]()
Specification : 434.12.007/F
R
Nonestab
17) BLANK SIZE FOR RING RACE UPPER TO 3906111455[39]()
Specification : 172.12.031/F
R
Nonestab
18) FLANGE FRONT L H TO 3906401045[39]()
Specification : 172.40.201-1A/F
C
Nonestab
19) RING TO 3906401050[39]()
Specification : 172.40.146/F
R
Nonestab
20) BOOSTER TO 3906401070[39]()
Specification : 172.40.231/F
R
Nonestab
21) BOOSTER TO 3906401071[39]()
Specification : 172.40.232/F
R
Nonestab
22) GEAR ANNULUS TO 3906401085[39]()
Specification : 172.40.247/F
R
Nonestab
23) FLANGE FRONT R H TO 3906401101[39]()
Specification : 175.40.001-A/F
C
Nonestab
24) FLANGE REAR RH TO 3906401115[39]()
Specification : 175.40.019-1A/F
C
Nonestab
25) DRUM RH AND LH TO 3906401123[39]()
Specification : 175.40.017-A&018-A/F
C
Nonestab
26) DISC TO 3906401132[39]()
Specification : 175.40.031/F
R
Nonestab
Category : p
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) TOOTHED RIM TO 3901011026[39]()
Specification : 188.11.002/F
R
Nonestab
2) MOVABLE RACE RING FORGING TO 3901011048[39]()
Specification : 447A.11.016/F
C
Nonestab
3) RH DRUM TO 3901040034[39]()
Specification : 172.40.300/F
R
Nonestab
4) DRUM RH FORGING TO 3901040036[39]()
Specification : 172.40.302/F
R
Nonestab
5) BOOSTER FORGING TO 3901040054[39]()
Specification : 172.40.321/F
R
Nonestab
6) INNER BOOSTER FORGING TO 3901040055[39]()
Specification : 172.40.322/F
R
Nonestab
7) RH EXTREME ENGAGING RING FORGING TO 3901040061[39]()
Specification : 172.40.328/F
R
Nonestab
8) RH MIDDLE ENGAGING RING FORGING TO 3901040062[39]()
Specification : 3901040062
R
Nonestab
9) R H FRONT FLANGE TO 3901040104[39]()
Specification : 172.40.364/F
C
Nonestab
10) L H FRONT FLANGE TO 3901040106[39]()
Specification : 172.40.365/F
R
Nonestab
11) RING RACE LOWER TO 3901212010[39]()
Specification : 172.12.015/F
R
Nonestab
12) RING RACE UPPER TO 3901212011[39]()
Specification : 188.12.002/F
R
Nonestab
13) MOVABLE RACE RING TO 3906109014[39]()
Specification : 172.11.067/F
R
Nonestab
14) RING TO 3906109020[39]()
Specification : 172.11.073/F
R
Nonestab
15) GEAR RIM TO 3906109067[39]()
Specification : 172.11.129/F
R
Nonestab
16) BLANK SIZE FOR RING RACE LOWER TO 3906111026[39]()
Specification : 434.12.007/F
R
Nonestab
17) BLANK SIZE FOR RING RACE UPPER TO 3906111455[39]()
Specification : 172.12.031/F
R
Nonestab
18) FLANGE FRONT L H TO 3906401045[39]()
Specification : 172.40.201-1A/F
C
Nonestab
19) RING TO 3906401050[39]()
Specification : 172.40.146/F
R
Nonestab
20) BOOSTER TO 3906401070[39]()
Specification : 172.40.231/F
R
Nonestab
21) BOOSTER TO 3906401071[39]()
Specification : 172.40.232/F
R
Nonestab
22) GEAR ANNULUS TO 3906401085[39]()
Specification : 172.40.247/F
R
Nonestab
23) FLANGE FRONT R H TO 3906401101[39]()
Specification : 175.40.001-A/F
C
Nonestab
24) FLANGE REAR RH TO 3906401115[39]()
Specification : 175.40.019-1A/F
C
Nonestab
25) DRUM RH AND LH TO 3906401123[39]()
Specification : 175.40.017-A&018-A/F
C
Nonestab
26) DISC TO 3906401132[39]()
Specification : 175.40.031/F
R
Nonestab
Category : p
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) TOOTHED RIM TO 3901011026[39]()
Specification : 188.11.002/F
R
Nonestab
2) MOVABLE RACE RING FORGING TO 3901011048[39]()
Specification : 447A.11.016/F
C
Nonestab
3) RH DRUM TO 3901040034[39]()
Specification : 172.40.300/F
R
Nonestab
4) DRUM RH FORGING TO 3901040036[39]()
Specification : 172.40.302/F
R
Nonestab
5) BOOSTER FORGING TO 3901040054[39]()
Specification : 172.40.321/F
R
Nonestab
6) INNER BOOSTER FORGING TO 3901040055[39]()
Specification : 172.40.322/F
R
Nonestab
7) RH EXTREME ENGAGING RING FORGING TO 3901040061[39]()
Specification : 172.40.328/F
R
Nonestab
8) RH MIDDLE ENGAGING RING FORGING TO 3901040062[39]()
Specification : 3901040062
R
Nonestab
9) R H FRONT FLANGE TO 3901040104[39]()
Specification : 172.40.364/F
C
Nonestab
10) L H FRONT FLANGE TO 3901040106[39]()
Specification : 172.40.365/F
R
Nonestab
11) RING RACE LOWER TO 3901212010[39]()
Specification : 172.12.015/F
R
Nonestab
12) RING RACE UPPER TO 3901212011[39]()
Specification : 188.12.002/F
R
Nonestab
13) MOVABLE RACE RING TO 3906109014[39]()
Specification : 172.11.067/F
R
Nonestab
14) RING TO 3906109020[39]()
Specification : 172.11.073/F
R
Nonestab
15) GEAR RIM TO 3906109067[39]()
Specification : 172.11.129/F
R
Nonestab
16) BLANK SIZE FOR RING RACE LOWER TO 3906111026[39]()
Specification : 434.12.007/F
R
Nonestab
17) BLANK SIZE FOR RING RACE UPPER TO 3906111455[39]()
Specification : 172.12.031/F
R
Nonestab
18) FLANGE FRONT L H TO 3906401045[39]()
Specification : 172.40.201-1A/F
C
Nonestab
19) RING TO 3906401050[39]()
Specification : 172.40.146/F
R
Nonestab
20) BOOSTER TO 3906401070[39]()
Specification : 172.40.231/F
R
Nonestab
21) BOOSTER TO 3906401071[39]()
Specification : 172.40.232/F
R
Nonestab
22) GEAR ANNULUS TO 3906401085[39]()
Specification : 172.40.247/F
R
Nonestab
23) FLANGE FRONT R H TO 3906401101[39]()
Specification : 175.40.001-A/F
C
Nonestab
24) FLANGE REAR RH TO 3906401115[39]()
Specification : 175.40.019-1A/F
C
Nonestab
25) DRUM RH AND LH TO 3906401123[39]()
Specification : 175.40.017-A&018-A/F
C
Nonestab
26) DISC TO 3906401132[39]()
Specification : 175.40.031/F
R
Nonestab
Category : p
Grade : Grade III
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING FOR GUIDE TRACK T 90 6120100103[61]()
Specification : FORGING FOR GUIDE TO DRAWING NUMBER 172.55.013/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION
C
Nonestab
2) FORGING FOR SHOE TRACK T 90 L F NO 6120100101[61]()
Specification : FORGING FOR "SHOE" TO DRAWING NUMBER 219.35.126/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION.
C
Nonestab
Category : ddp
Grade : 3
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING FOR GUIDE TRACK T 90 6120100103[61]()
Specification : FORGING FOR GUIDE TO DRAWING NUMBER 172.55.013/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION
C
Nonestab
2) FORGING FOR SHOE TRACK T 90 L F NO 6120100101[61]()
Specification : FORGING FOR "SHOE" TO DRAWING NUMBER 219.35.126/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION.
C
Nonestab
Category : ddp
Grade : 3
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING FOR GUIDE TRACK T 90 6120100103[61]()
Specification : FORGING FOR GUIDE TO DRAWING NUMBER 172.55.013/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION
C
Nonestab
2) FORGING FOR SHOE TRACK T 90 L F NO 6120100101[61]()
Specification : FORGING FOR "SHOE" TO DRAWING NUMBER 219.35.126/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION.
C
Nonestab
Category : ddp
Grade : 3
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046[71]()
Specification : FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046
C
Nonestab
Category : p
Grade : Grade I
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046[71]()
Specification : FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046
C
Nonestab
Category : p
Grade : Grade I
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046[71]()
Specification : FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046
C
Nonestab
Category : p
Grade : Grade I
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046[71]()
Specification : FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046
Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615.
C
Nonestab
3) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "
C
Nonestab
4) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615.
C
Nonestab
3) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "
C
Nonestab
4) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615.
C
Nonestab
3) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "
C
Nonestab
4) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF T.A. CLAMP OF TA-90[71]()
Specification : FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045
C
Nonestab
Category : p
Grade : Grade I
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF T.A. CLAMP OF TA-90[71]()
Specification : FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045
C
Nonestab
Category : p
Grade : Grade I
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF T.A. CLAMP OF TA-90[71]()
Specification : FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045
C
Nonestab
Category : p
Grade : Grade I
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) CHEEK CARRIER PLANET TO LF 3906401150[39]()
Specification : GOST 4543-71
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) CHEEK CARRIER PLANET TO LF 3906401150[39]()
Specification : GOST 4543-71
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) CHEEK CARRIER PLANET TO LF 3906401150[39]()
Specification : GOST 4543-71
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FORGING TO DRG NO OFM 32851 REQUIRED FOR TA LINK TO DRG NO OFM 32844[70]()
Specification : As per Drawing and specification
C
Nonestab
Category : p
Grade : Grade I
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FORGING TO DRG NO OFM 32851 REQUIRED FOR TA LINK TO DRG NO OFM 32844[70]()
Specification : As per Drawing and specification
C
Nonestab
Category : p
Grade : Grade I
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FORGING TO DRG NO OFM 32851 REQUIRED FOR TA LINK TO DRG NO OFM 32844[70]()
Specification : As per Drawing and specification
C
Nonestab
Category : p
Grade : Grade I
Size :
M
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 3996406170 FORG FOR DRIVEN GEAR 175 45 007 [39]()
Specification : FORG.FOR DRIVEN GEAR 175-45-007
C
Estab
2) 3996406171 FORG FOR GEAR 175 45 008 [39]()
Specification : FORG.FOR GEAR 175-45-008
C
Estab
3) 3996406168 FORG FOR GEAR INTERMED 175 45 005F [39]()
6) 3996408048 FORG FOR BEARING RING 172 47 106 2 [39]()
Specification : FORG.FOR BEARING RING 172-47-106-2
C
Estab
7) 3996408044 FORG FOR CARRIER 172 47 102 3 [39]()
Specification : FORG.FOR CARRIER 172-47-102-3
C
Estab
8) 3996406050 FORGING FOR GEAR WHEEL172 45 070 1F [39]()
Specification : FORGING FOR GEAR WHEEL172-45-070-1F
C
Estab
Category : p
Grade : Grade III
Size :
M
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) MFG. & SUPPLY OF ROUGH MACHINED DRIVING GEAR FORGINGS TO DRG NO 118-DRIVE GEAR-3399 AS PER SCOPE OF WORK/MA-11/1108/23 DATED: 13-06-2017[80]()
Specification : Manufacture & Supply Of Rough Machined Driving Gear Forgings to Drg. No. 118-Drive Gear – 3399 as per Scope of Work/MA-11/1108/23 Dtd: 13-06-2017
C
Nonestab
Category : ddp
Grade : Grade II
Size :
M
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) MFG. & SUPPLY OF ROUGH MACHINED DRIVING GEAR FORGINGS TO DRG NO 118-DRIVE GEAR-3399 AS PER SCOPE OF WORK/MA-11/1108/23 DATED: 13-06-2017[80]()
Specification : Manufacture & Supply Of Rough Machined Driving Gear Forgings to Drg. No. 118-Drive Gear – 3399 as per Scope of Work/MA-11/1108/23 Dtd: 13-06-2017
C
Nonestab
Category : ddp
Grade : Grade II
Size :
M
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) MFG. & SUPPLY OF ROUGH MACHINED DRIVING GEAR FORGINGS TO DRG NO 118-DRIVE GEAR-3399 AS PER SCOPE OF WORK/MA-11/1108/23 DATED: 13-06-2017[80]()
Specification : Manufacture & Supply Of Rough Machined Driving Gear Forgings to Drg. No. 118-Drive Gear – 3399 as per Scope of Work/MA-11/1108/23 Dtd: 13-06-2017
