461
Sheth & co
MUMS28707A
Download
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6332100197 FUZE MINE A T 1C ND MODIFIED[63]()
Specification : FUZE MINE A/T 1C ND MODIFIED DRG. NO. CQA (A)/AMN/3197,CQA (A)/AMN/3198, CQA (A)/AMN/3496, CQA (A)/AMN/3194 I&II,CQA (A)/AMN/3495 I&II FOR MINE AT 1A ND .
C
Nonestab
Category : p
1) Ammunition Factory KhadkiDebarred
Name
Specification
Use
Status
1) CONTAINER 38 B DRG NO. CIA/AMN/2008 PART NO.ISV 464 A SPECN. NO.CQA(A) 2804()
CQA(A) 2804
E
Not Estab.
2) CONTAINER 38 B TO DESGN. REF. NO. CIA/AMN/2008 CONSIST OF 1) BODY 2) LID 3) RING A & RUBBER DISC()
DRG. NO. CIA/AMN/2008
E
Estab.
3) CONTAINER 38 B TO DESGN. REF. NO. CIA/AMN/2008 (6595050005)()
DESGN. REF. NO. CIA/AMN/2008 (6595050005)
E
Not Estab.
4) CONTAINER WITH DISC FOR AUG CHARGE 120 MM TO DRG. NO. CIA/AMN/655 OT. NO. ITV 21 SPECN. CQA(A) 2303()
CQA(A) 2303
C
Estab.
5) CONTAINER FOR BOOSTER CHARGE 130-02-016M TO DRG NO. NAI (V) 7002 (PROV) DT.23.7.04()
DRG NO. NAI(V) 7002 (PROV) DT.23.7.04
C
Estab.
6) CONTAINER TO DRG NO. HEMRL DRG 1396 DET NO. 3 PART NO IQX 1032 WITH LID CAP ()
HEMRL DRG 1396 DET NO. 3 PART NO IQX 1032
E
Not Estab.
7) CONTAINER NO. P-17 (EMPTY ASSY) TO DRG NO ARDE 1910 DETAIL NO.1. DT 30-7-97()
DRG. NO. ARDE 1910
E
Not Estab.
8) HALF CUP B DES REF NO CIA/AMN/851 DRG PT.NO. ISV 862()
DRG. NO. CIA/AMN/851 PT.NO. ISV 862
C
Estab.
9) COLLAR NOSE TO DRG. NO. ARDE 2233 DET. NO. 1 PT. NO. ISV 1942()
DRG. NO. ARDE 2233 DET. NO. 1 PT. NO. ISV 1942
C
Estab.
10) PLASTIC POWER PISTON WITHOUT POUCH FOR 65MM/ 70MM 12 BORE PAPER CARTG. AS PER DRG. NO. KF/SK-1809()
DRG. NO. KF/SK-1809
C
Not Estab.
11) CONTAINER (MODIFIED) FOR AUGMENTING CHARGE FOR 51 MM BOMB AS PER DRG. NO. ODC/AFK-020-13 SHT. 1 TO 3()
DRG. NO. ODC/AFK-020-13 SHT. 1 TO 3
C
Non Established
12) MIDDLE PACKING PIECE EXPAND. POLYST. FOAM TYPE-2 130X120X6MM THICK, AVG. DENSITY 15TO 20 kg/m3()
IS :4671-984(FIRST REVISION) TYPE-2
C
Non Established
13) SET OF PACKING PIECES FOR MINE APM 16A1 CONSISTING OF PIECE PACKING (1) BOTTOM (2) TOP (3) HDPE SHT.()
PT. NO. ISV 2168, ISV 2169, ISV 2170
C
Non Established
Category : DDP,DP
1) Ammunition Factory KhadkiDebarred
Name
Specification
Use
Status
1) 1)CONTAINER 2) LID 3)DISC[60]()
Specification : DRG. NO. NAI(V) 8216/1 QTY. 1 NO.DT. 30.05.2008 2) LID DRG. NO. NAI (V) 8216/2 PROV. QTY 1 NO DT.30.05.2008 3) DISC DRG. NO. NAI(V) 8216/3 PROV.QTY.2 NO. DT. 30.05.2008
C
Nonestab
2) AMMN CONTAINER 69 A/L PLASTIC ARDE[65]()
Specification : CQA(A)2804
C
Nonestab
3) BAG POLYTHENE TO DRG.AFK/SK-2229[10]()
Specification : AS PER AFK SPECN.
R
Nonestab
4) BOMB 81MM HE MORTAR C EMPTY[60]()
Specification : CQA (A) 2305 & L 8638-J
C
Nonestab
5) BOMB 81MM MORTAR B EMPTY BODY[60]()
Specification : CQA(A) 2304 & L 8638-J
C
Nonestab
6) CELLULOID SHEET 610X1372X.13MM TH[10]()
Specification : JSS 1375-03 :2011 (REVN NO.3)
R
Nonestab
7) CHARGE HOLDER TO DRG.NO.KF/SK-1746[60]()
Specification : DGOF 135
C
Nonestab
8) CONT.ARDE-1935,PT ITV28A W/O DISC.[60]()
Specification : CQA(A) 2303
C
Nonestab
9) CONTAINER 38 B WITH SLEEVE A & B &[65]()
Specification : DESGN REF NO. CIA/AMN/2008
C
Nonestab
10) CONTAINER FOR BOOSTER CHARGE[60]()
Specification : DRG NO. NAI(V) 7002 (PROV) DT.23.7.04 WITH 2 NOS OF SPARE O RING TO DRG. NO. NAI (V) 7002/2 (PROV) DT. 23.7.04
C
Nonestab
11) CONTAINER TO ARDE-1933 DET-4 ITV 170[60]()
Specification : CQA (A) 2322
C
Nonestab
12) CONTAINER WITH DISC CELL 81 MM[14]()
Specification : CQA (A) 2303
C
Nonestab
13) DISC LOW DENSITY POLYTHENE 3.2MM TH[21]()
Specification : KF/SK-1572
C
Nonestab
14) E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 265 MM X 146 MM X 12 MM[21]()
Specification : IS:4671-1984
C
Nonestab
Category : DDP,DP
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PACKING BOX()
33P6012 FOR 38MM MSL
C
Estab.
2) PACKING BOX()
33P6012 FOR 38MM MSL
C
Estab.
Category : DDP,DP
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) INPUT BARREL BLANK FOR TEAR GAS GUN()
AS PER DRAWING
C
Not Estab.
2) MAGAZINE ASSEMBLY FOR 7.62MM ASSAULT RIFLE (GHAATAK).()
AS PER DRAWING
C
Non Established
3) MACHINED BODY FOR 5.56MM ASSAULT RIFLE.()
AS PER DRAWING.
C
Non Established
4) CASE MAGAZINE FOR RIFLE 5.56MM EXCALIBUR.()
AS PER DRAWING.
C
Non Established
5) PACKING BOX FOR 7.62MM ASSAULT RIFLE.()
AS PER DRAWING.
C
Non Established
Category : DDP,DP
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) MAGAZINE COVER PIPE FOR 12 BORE MODIFIED PUMP ACTION GUN [70]()
Specification : RFI DRG. NO. PAG-0009
C
Nonestab
2) GUARD HAND ASSY (FOR DARK BLUE GRAY) FOR RIFLE 5.56MM.INSAS.[79]()
Specification :GUARD HAND ASSY (FOR DARK BLUE GRAY)TO DS CAT NO.1005-007775(DC-26520-SA). CONSISTING OF:- 1) 1005-560844(DC-26635-SA)2) 5360-007116(DC-26521-SA), 3)1005-007903(DC-26521-SA) &4) 5305-077989 (WITH S.S.REFLECTOR).ARDE
C
Nonestab
3) BUTT PLASTIC (SOLID) WITH SINGLE MOULDED PLASTIC PIECE FOR RIFLE 5.56 MM EXCALIBUR.[70]()
Specification : DRG. NO. RFI/SK NO. 9154
C
Nonestab
4) CATCH COCKING HANDLE(MOULDING) FOR RIFLE 5.56MM INSAS.[79]()
Specification : CATCH COCKING HANDLE(MOULDING)(D/BLUE),DS CAT.NO.1005-560839(DC-26635-SA).CONSISTING OF: CATCH COCKING HANDLE TO DS CATNO.1005-007822(DC-26514-SA), ARDE SPECN NO. ARDE/SPECN/542(PROV).FOR RIFLE 5.56MM INSAS.
C
Nonestab
5) GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 FOR RIFLE 5.56MM INSAS. [79]()
Specification :GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK-
C
Nonestab
6) GUARD HAND ASSY.(UPPER)(STEEL STRIP) FOR RIFLE 5.56MM INSAS. [79]()
Specification :GUARD HAND ASSY.(UPPER)(STEEL STRIP)[FOR DARK BLUE GRAY COL.TO DS CAT NO.1005-560046 (DC-26533-SA). CONSISTING OF:-1)1005-560047(DC-25638-SA) 2)1005-560832(DC-26635-SA) &3)5320-022259(DC-26504-SA),(2-NOS.)FOR RIFLE 5.56MM INSAS.
C
Nonestab
7) BUTT PLASTIC (SOLID) FOR CQB CARBINE. [70]()
Specification : DRG No. RFI SK 10294
C
Nonestab
8) FOLDABLE BUTT FOR RIFLE 5.56MM INSAS[70]()
Specification : FOLDABLE BUTT FOR RIFLE 5.56MM INSAS(STEEL COMPT)CONSIDERINGOF BUTT FRAME ASSY, ARDE/2975/41(DC-S/515) CONSIST OF 10,11,19,20,23,29,33,35,36,37,46 & RFI.SK.NO.7225-S,7226-S,7227-S ,7369-S AND SPG.DOWEL SLEEVE 2DIA X7MM & 5DIA X 42MM & 6DI
C
Nonestab
Category : DDP,DP
1) Ordnance Cable Factory Chandigarh
Name
Specification
Use
Status
1) HDPE MASTER BATCH BLACK()
AS PER RELEVENT SUPPLY ORDER
R
Not Estab.
2) PE COMPOUND FOR INSULATION()
TEC approved JFC Specification No. GR/CUG-01/03 Aug 2003
R
Non Established
Category : DDP,DP
1) Small Arms Factory
Name
Specification
Use
Status
1) Grip Handle Left and Right For FIRING DEVICE[70]()
Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125
C
Nonestab
Category :
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Bag Polythene for packing NC()
Drg. No. OFBA/NC/319
R
Category : DP
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CPP Hollow corrugated Box for 0.315 sporting Rifle (10 Rifles)()
T.ID:128MMETT15000424
C
Estab.
Category : DDP,DP
1) Gun and Shell Factory
Name
Specification
Use
Status
1) PLUG REAR TO DRG.NO.ITV-52 IN F/C()
AS PER DRG.& SPECIFICATION
C
NOT ESTAB.
2) NYLON MOULDED POLE IN F/C TO DRG. NO. QX-1743 DC(I) NO. 36123-A DT.06/06/96()
AS PER DRG & SPECIFICATION
C
Non Established
Category : DDP,DP
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TWIN CONTAINER ROUND PARTNO 1185633 LF 9911358474[99]()
Specification : TWIN CONTAINER/ROUND PART NO.1185633 TO OEM DRG.NO.2031324.
P
Nonestab
Category :
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TWIN CONTAINER 520 9 PART 1202503 LF 9911358476[99]()
Specification :
C
Nonestab
Category :
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) 84MM TPT TWIN CONTAINER PART1202502 LF 9911358478[99]()
Specification :
R
Nonestab
Category :
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TWIN CONTAINER 520 9 PART 1202503 LF 9911358476[99]()
Specification :
E
Nonestab
Category :
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Bag Polythene for packing NC[21]()
Specification : BAG POLYTHENE FOR PACKING NC- QUALITY OF MATERIAL TO CONFORM TO LOW DENSITY POLYETHYLENE TYPE-1 SPECIFICATION JSS- 9330 - 03-2014,REV.NO.3.THICKNESS 0.18 PLUS MINUS 0.02MM.DIMENSION AND HEAT SEALING AS PER DRG.NO.OFBA/NC/46 AMENDED ON 27.
R
Estab
Category :
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CONTAINER WITH DISC FOR MORTAR BOMB 81 mm ILLG.()
CQA(A) 2303
C
Estab
2) CONTAINER FOR AUGMENTING CARTG. FOR MORTAR BOMB 51 mm SMOKE()
ARDE 1935
C
Estab
3) CELLULOID STRIP 50 x 70 mm FOR MORTAR BOMB 51 mm ILLG.()
JSS 1375-03 : 2004
C
Estab
4) CYLINDER POLYTHENE FOR FOG SIGNAL()
OFDR/CARTG.-84/R-3/A3
C
Estab
5) CELLULOID STRIP 50 Sq. mm FOR MORTAR BOMB 51 mm SMOKE()
JSS 1375-03 : 2004
C
Estab
6) AMMUNITION CONTAINER 75A ( ASSY) FOR FLARE TRIP WIRE()
CQA/AMMN/3259
C
Estab
7) AMMN. CONTAINER PLASTIC 47B FOR FUZE 213 P MK 5 (M2,M3,& M4)()
CIA/AMN/2483
C
Estab
8) AMMN. CONTAINER 69A/L FOR MORTAR BOMB 51 mm SMOKE / ILLG.()
ARDE 2125
C
Estab
9) LINER PRIMARY CHARGE(POLYSTER SHEET G C Q)()
JSS 9330-03 : 1995
C
Estab
10) OBTURATOR FOR SHELL 155 mm ILLG M1A1()
JSS 9330-03 : 1995
C
Estab
11) PLASTIC CONTAINER 84T FOR SHELL 84 mm ILLG.()
OFDR/CARTG./79/A2
C
Estab
12) CARRIER AMMN. 17A FOR MORTAR BOMB 81 mm ILLG. 2A()
ARDE 2224
C
Estab
13) VENTURY ASSY FOR PYRO(INDIA) PARA FLARE RED()
OFDR/CT/14/U I/A3
C
Estab
Category : DDP,DP
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SEALING RING TO DRG.NO.TRD-1-2-2246 (9911357874)()
SEALING RING TO DRG.NO.TRD-1-2-2246
C
NOT ESTABLISHED
2) SLIPPING RING F1301-152220-B (6770430100)()
SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD.15/01/01 SPECN:- F1301-924320-D (CQA-4919) DC NO-36730-A DTD.15/01/01
C
NOT ESTABLISHED
Category : DDP,DP
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TWIN CONTAINER 520:9 DRG TRD 422155[99]()
Specification : TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155.
C
Estab
Category :
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CAP AND BOTTOM FOR 84MM SMOKE 469C LF 9911358520[99]()
Specification : CAP - PART NO.4102110 TO OEM DRG.NO.301178701/TRD DRG.NO.4.2.2743 & BOTTOM- PART NO. 6413039 TO OEM DRG.NO. 304061652/TRD DRG. NO.2.2.2742
C
Nonestab
Category :
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141000210 BODY MINE FOR 1B DIR. WITH ADAPTER.[61]()
Specification : SPECN. IA 1285(B
C
Estab
Category :
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6206500061 MINE BODY A T DRILL 1A ND EMPTY[62]()
Specification : MINE DRILL A.T.1A ND EMPTY WITHOUT FUZE DRILL MINE A/T 1C ND TO DES. REF. NO. CIA/AMN/2255, DRG. PT. NO. ITX 11 GE DC NO. 37050-A DTD 19/04/06, SPECN NO.CQA 1801(D) DC 37050-ADT.19/04/06.
C
Nonestab
Category :
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141600000 MINE APERS M 14 EMPTY WITH FZ INTGL[61]()
Specification : CQA (A) 1837
C
Nonestab
Category :
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1749009905 RIVET ITX 239 MINE AP 1B DIR[17]()
Specification : RIVET TO DESIGNERS REF.ARDE-1521 DET NO.6 DRG.PT.NO. ITX-239 DC 35824-A
C
Nonestab
Category :
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6206500063 MINE A T 1B ND EMPTY[62]()
Specification : MINE A T 1B ND EMPTY
C
Nonestab
Category :
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) 84MM TPT TWIN CONTAINER PART1202502 LF 9911358478
Description : 84MM TPT TWIN CONTAINER PART1202502 LF 9911358478()
Specification : 84MM TWIN CONTAINER/ROUND PART NO.1202502.
R
Nonestab
Category : p
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) POLYPROPYLENE CORRUGATED SHEET, ANTI STATIC[14]()
Specification : DRAFT SPECIFICATION NO. OFV/SPECN/PP/102,
SIZE :- 245 (+/-5)MM x 160 (+/-3)MM,
THICKNESS :- 4.5MM TO 5MM,
GSM :- 1500 (TOLERANCE +/-75)
R
Nonestab
Category : dp
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) POLYPROPYLENE CORRUGATED SHEET 250mm, ANTI STATIC[14]()
Specification : DRAFT SPECIFICATION NO. OFV/SPECN/PP/102,
SIZE :- 250 (+/-5)MM X 70 (+/-3)MM,
THICKNESS :- 4.5MM TO 5MM,
GSM :- 1500 (TOLERANCE +/- 75)
R
Nonestab
Category : dp
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SLIPPING RING (6770430100)
Description : SLIPPING RING (6770430100)()
Specification : SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01
C
Estab
Category : p
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) PLASTIC FILM SLEEVE FOR M-92[64]()
Specification/Drawing No.
OFN/BMCS/M-92/PLASTIC FILM SLEEVE
C
Estab
Category : p
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) PLASTIC FILM BAG FOR M-92[64]()
Specification/Drawing No.
OFN/BMCS/M-91/M-92/PLASTIC FILM BAG
C
Estab
Category : p
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) PLASTIC FILM BAG FOR M-91[64]()
Specification/Drawing No.
OFN/BMCS/M-91/M-92/PLASTIC FILM BAG
C
Estab
Category : p
1) Small Arms Factory
Name
Specification
Use
Status
1) Loop Sling Front for JVPC[70]()
Specification : Loop Sling Front to DRG No. 0204 03 02 37 39 002 00 DB
C
Nonestab
2) GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DA[70]()
Specification : GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DA
C
Nonestab
3) TRIGGER GUARD MOULDING for JVPC[70]()
Specification : TRIGGER GUARD MOULDING for JVPC DRG. NO.0204-03-03-16-26-000-00DD
C
Nonestab
4) HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW[70]()
Specification : HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW
C
Nonestab
5) COCKING HANDLE MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-01-14-000-00DB CONSISTING OF INSERT COCKING HANDLE[70]()
Specification : COCKING HANDLE MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-01-14-000-00DB CONSISTING OF INSERT COCKING HANDLE
C
Nonestab
6) PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'[70]()
Specification : PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'
C
Nonestab
7) BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER[70]()
Specification : BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER
C
Nonestab
Category : ddp
1) Small Arms Factory
Name
Specification
Use
Status
1) Blank for Casing Barrel drg .no. SK-5252 for Carbine 9mm
Description : Blank for Casing Barrel drg .no. SK-5252 for Carbine 9mm()
Specification : AS PER DRG.
C
Estab
2) GUARD HAND ASSEMBLY TO DS CAT NO1005 007775
Description : GUARD HAND ASSEMBLY TO DS CAT NO1005 007775()
Specification : GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO. 26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND GUARD CQA(SA)SK-996,DSCATNO.1005-560844,DC(I)NO26635-SA,DT,12.5.12NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR COD
C
Estab
Category : p
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) TEFLON SHEET POUCH 360
Description : TEFLON SHEET POUCH 360()
Specification : TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286,HEMRL DRG. NO 1517 DETL. 1
R
Estab
Category : ddp
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) TEFLON SHEET FILM
Description : TEFLON SHEET FILM()
Specification : TEFLON SHEET (FILM) OF SIZE 126X126X0.25MM SPEC: HEMRL/PS/286, HEMRL DRG. NO. 1518 DETL.2
R
Estab
2) TEFLON SHEET POUCH 278
Description : TEFLON SHEET POUCH 278()
Specification : TEFLON SHEET (CUT TO SIZE) FOR POUCH OF SPECIAL ERA PANEL SIZE 278X215X0.25MM SPEC. HEMRL/ED/PS/286, HEMRL DRG. NO. 1516 DETL. 2
R
Estab
3) TEFLON SHEET POUCH 300
Description : TEFLON SHEET POUCH 300()
Specification : TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2
R
Estab
4) TEFLON SHEET POUCH 350
Description : TEFLON SHEET POUCH 350()
Specification : TEFLON SHEET (CUT TO SIZE) FOR TOP ATTENUATOR POUCH, SIZE 350X170X0.25MM, SPEC.NO. HEMRL/PS/286, HEMRL DRG.NO. 1518 DETL.1
R
Estab
5) Bag Polythene (Ser)
Description : Bag Polythene (Ser)()
Specification : Drg No. OFBA/HEX/30,DTD. 16.01.75 AMENDED ON 24.02.2010
R
Estab
Category : ddp
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) TEFLON SHEET POUCH 360
Description : TEFLON SHEET POUCH 360()
Specification : TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1
R
Estab
Category : ddp
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PLASTIC CONTAINER TO DRG NO FS 2368C FOR 84MM TPT PROJECTILE
Description : PLASTIC CONTAINER TO DRG NO FS 2368C FOR 84MM TPT PROJECTILE()
Specification : PLASTIC CONTAINER TO DRG.NO.FS-2368C FOR 84MM TPT PROJECTILE
C
Estab
2) ROTOR HOLDER TO OFAJ DRG NO FS 2473 B FOR FUZE M842 AMMN 20 MM AMR HEI
Description : ROTOR HOLDER TO OFAJ DRG NO FS 2473 B FOR FUZE M842 AMMN 20 MM AMR HEI()
Specification : "ROTOR HOLDER"TO OFAJ DRG.NO.FS-2473 B FOR FUZE M842 AMMN. 20 MM AMR HEI.
C
Estab
3) ROTOR HOLDER TO OFAJ DRG NO FS 2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI
Description : ROTOR HOLDER TO OFAJ DRG NO FS 2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI()
Specification : "ROTOR HOLDER" TO OFAJ DRG.NO. FS-2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI
C
Estab
Category : ddp
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Expanded Polysterene FLAMEPROF
Description : Expanded Polysterene FLAMEPROF()
Specification : EXPANDED POLYSTYRENE SELF EXTINGUISHING TYPE(TYPE 2) DENSITY 30 KG/CU.M.CONFORMING TO CLAUSE 4.5.1 OF SPECIFICATION IS: 4671-1984 ( FIRST REV.) REAFFIRMED 1990 TO CQA(A) DRAWING NO 13981-1.0 DC 35707-A DTD 5-5-94 SIZE 108MM PLUS MINUS 2MM
R
Estab
2) Alkathene Polymer WRN-19
Description : Alkathene Polymer WRN-19()
Specification : ALKATHENE POLYMER WRM-19 TYPE XD POLYTHENE MOULDING AND EXT RUSION MATERIAL(FOR AMMN. APPLICATION) CONFORMING TO SPECN. DEF/STAN 13-9/1.
R
Estab
Category : dp
1) Small Arms Factory
Name
Specification
Use
Status
1) BARREL BLANK MACHINED UPTO PRE-COLD SWAGING STAGE TO
Description : BARREL BLANK MACHINED UPTO PRE-COLD SWAGING STAGE TO()
Specification : DRG.NO.SK-5107*+2 ARDE/SPECN/536(PROV)
C
Estab
2) SIDE STOCK TRIGGER GRIP RIGHT SUB-ASSY IN FINISHED CONDITION TO DS CAT NO.1005-000604 DC(I) NO.25283-SA DT.07-03-02 LATEST ISSUE
Description : SIDE STOCK TRIGGER GRIP RIGHT SUB-ASSY IN FINISHED CONDITION TO DS CAT NO.1005-000604 DC(I) NO.25283-SA DT.07-03-02 LATEST ISSUE()
Specification : SIDE STOCK TRIGGER GRIP RIGHT SUB-ASSY IN FINISHED CONDITION TO DS CAT NO.1005-000604 DC(I) NO.25283-SA DT.07-03-02 LATEST ISSUE
C
Estab
Category : p
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CONTAINER WITH DISC CLOSING
Description : CONTAINER WITH DISC CLOSING()
Specification : CONTAINER WITH DISC CLOSING TO DRG. NO.ARDE-1935, DET NO.1 PART NO.ITV 28A SHEET-1 TO DC.36747-A DT. 09-03-2001,SHEET-2 DC-35684-A DT.06-04-94 TO SPECN.CQA(A) 2303(f).
C
Estab
2) SCUFF PROTECTOR
Description : SCUFF PROTECTOR()
Specification : DRG.NO. 155-1110 DC NO. 37025-A, DT. 08.08.05.
C
Estab
3) BOX 7A (PLASTIC)
Description : BOX 7A (PLASTIC)()
Specification : BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431),DC NO. 35596A DT.01.10.93.
C
Estab
4) MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A
Description : MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A()
Specification : MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN. CQA(A) 1817(t) DC NO.37096-A, DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347, END CAP ITX 344, PLUG CLOSING BOTTOM ITX 340, PLUG CLOSING END CAP ITX 341 HOUSING FUZE ANTI
C
Estab
5) AMMN.CONTAINER 47 B
Description : AMMN.CONTAINER 47 B()
Specification : AMMN.CONTAINER 47 B FOR FUZE 117 MK -20 ISV-515A DC.36647.A RETRACED Dt.12.07.2013.
C
Estab
6) POLYTHENE BAG TO DRG.CIA/AMN/2185
Description : POLYTHENE BAG TO DRG.CIA/AMN/2185()
Specification : POLYTHENE BAG TO DRG.CIA/AMN/2185, DET.NO-10, PART NO.ISV-1627, DC NO.36832-A, DT.10.5.02. MATERIAL LOW DENSITY POLYETHYLENE TYPE-1 TO SPECN: JSS-9330-03:2014 REV-3 DC NO.5292 ME, DT.16.12.14, SIZE-1170MM x 300MM x0.5 MM THICK.
C
Estab
7) CUP
Description : CUP()
Specification : DRG. NO. ARDE 2043 DET. NO. 5 PART NO. ISV-1764 DC NO. 36356-A, SPECIFICAITON NO. CQA(A) 2804(m) DC NO. 36202-A.
C
Estab
8) CONTAINER TO ARDE-1933, DET-4,PT.NO.
Description : CONTAINER TO ARDE-1933, DET-4,PT.NO.()
Specification : CONTAINER TO ARDE-1933, DET-4, PT.NO. ITV 170, DC NO.36207-A, DT. 02-12-96 SPECN. CQA(A)-2322(r) DC 37329-A.
C
Estab
9) PLUG FUZE HOLE 50.8 MM 2A PLASTIC
Description : PLUG FUZE HOLE 50.8 MM 2A PLASTIC()
Specification : ISX-315 DESIGNERS REF NO. CIA/AMN/2171 DC NO.37347-A DT.29.10.13.
C
Estab
10) GRUMMET ASSEMBLY CONSISTING OF (1) GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT
Description : GRUMMET ASSEMBLY CONSISTING OF (1) GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT()
Specification : DESIGNERS REF.NO: 04-13-2452-148.(REF. OFBL DRG.NO:BL/PB/U-5/343).
C
Estab
11) SLEEVE MAGAZINE TO DRG.NO.ARDE-2028 PART
Description : SLEEVE MAGAZINE TO DRG.NO.ARDE-2028 PART()
Specification : SLEEVE MAGAZINE TO DRG.NO. ARDE-2028 PART NO.IQX-831, DC NO.36785, DT.08.10.2001 [FOR PRIMER 18A]
C
Estab
12) FUZE MINE A/T 4A ND(EMPTY ASSEMBLY)
Description : FUZE MINE A/T 4A ND(EMPTY ASSEMBLY)()
Specification : FUZE MINE A/T 4A ND (EMPTY ASSEMBLY) TO DRG PT NO.IQX-75 GE DC NO.35879-A DT.20.12.94 TO SPECN.NO. CQA(A) 1819(g) DC 36823-A DT.20.03.2002.[REFER SUB ASSY DRGS (1) FUZE MINE A/T 4A ND (EMPTY SUB ASSY)TO IQX 86A DC NO.35879-A DT.20.12.94 (
C
Estab
13) AMMUNITION CONTAINER 69A/L, PLASTIC
Description : AMMUNITION CONTAINER 69A/L, PLASTIC()
Specification : DRG. NO.ARDE-2125, DET NO.3 PART NO.ISV 533 A, DC 36469-A SPECN NO. CQA(A) 2804(m) DC 36202-A. PACKING PLYWOOD/ CORRUGATED BOXES DULY TAPE BANDED (MAX. 50 CONT. PER BOX).
C
Estab
14) OBTURATOR_6284001010
Description : OBTURATOR_6284001010()
Specification : OBTURATOR TO DESIGNER REF.NO.155- 1140, DC NO.37025-A, DT.08.08.2005.
C
Estab
Category : p
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) EXPANDED POLYSTYRENE FOAM 275MM[99]()
Specification : SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG. PER CUBIC METER TO SPECN: IS-4671-1984(FIRST REVISION) REAFFIRMED 1995 SIZE:275MMx 142MMx 12(-) 1 MM TYPE 2
E
Estab
Category : p
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) EXPANDED POLYSTYRENE FOAM 265mm[99]()
Specification : SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG PER CUBIC METER TO SPECN: IS-4671-1984(FIRST REVISION) REAFFIRMED 1995 SIZE:265MMx 146MMx 12(-) 1 MM
E
Estab
Category : p
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) EXPANDED POLYSTYRENE FOAM 146mm[21]()
Specification : TYPE 2 SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG PER CUBIC METER TO SPECIFICATION IS:4671-1984(FIRST REVISION), REAFFIRMED 1995, SIZE:146MMx 120MMx 12MM
E
Estab
Category : p
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PLASTIC CONTAINER TO DRG NO FS 2368C FOR 84 MM TPT PROJECTILE[00]()
Specification : DRG NO FS 2368C
C
Nonestab
Category : p
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) TRANSIT PLUG TO CQA AMMN DRG NO 155 1065[00]()
Specification : TRANSIT PLUG TO CQA(AMMN)DRG.NO.155-1065,DC 36792-A DT. 01-11-01.
C
Nonestab
2) PLUG TO CQA A PART NO ISX 393[00]()
Specification : as per Drawing
C
Nonestab
Category : p
462
SEWbizsol
PNES32670B
Download
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6333501102 MS TARGET PLATE[63]()
Specification : MS TARGET PLATE THICKNESS 5 MM AS PER OFCH DRG. NO. OFCH/PR/236
C
Nonestab
2) 6333501101 MS TARGET PLATE[63]()
Specification : MS TARGET PLATE THICKNESS 1.5 MM AS PER OFCH DRG. NO. OFCH/PR/235
C
Nonestab
Category :
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) TRIANGULAR STAY ()
DRG. NO. 4071918 (AS PER SCOPE OF WORK FOR WHEEL CARRG. ASSY. OF PROJ DHANUSH)
C
NOT ESTAB.
2) MANDREL ASSY()
VMT-SK-119-10000-11
C
Non Established
Category : P
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) TRIANGULAR STAY [20]()
Specification : DRG. NO. 4071918 (AS PER SCOPE OF WORK FOR WHEEL CARRG. ASSY. OF PROJ DHANUSH)
E
Estab
2) MANDREL ASSY[20]()
Specification : VMT-SK-119-10000-11
E
Estab
3) Manufacturing and Supply of Set of Stainless Steel Plates as per Annexure SSP1 for Kavach MOD II[71]()
Specification : Manufacturing and Supply of Set of Stainless Steel Plates as per Annexure SSP1 for Kavach MOD II
C
Nonestab
4) Manufacturing and supply of set of Fabrication and Sheet Metal Works as per Annexure FSMW1 for Kavach Mod II[71]()
Specification : Manufacturing and supply of set of Fabrication and Sheet Metal Works as per Annexure FSMW1 for Kavach Mod II
C
Nonestab
5) Manufacturing and Supply of Set of Heavy Machining Items as per Annexure MH1 for Kavach MOD II[71]()
Specification : Manufacturing and Supply of Set of Heavy Machining Items as per Annexure MH1 for Kavach MOD II
C
Nonestab
Category : P
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) TRIANGULAR STAY [20]()
Specification : DRG. NO. 4071918 (AS PER SCOPE OF WORK FOR WHEEL CARRG. ASSY. OF PROJ DHANUSH)
E
Estab
2) MANDREL ASSY[20]()
Specification : VMT-SK-119-10000-11
E
Estab
3) Manufacturing and Supply of Set of Stainless Steel Plates as per Annexure SSP1 for Kavach MOD II[71]()
Specification : Manufacturing and Supply of Set of Stainless Steel Plates as per Annexure SSP1 for Kavach MOD II
E
Estab
4) Manufacturing and supply of set of Fabrication and Sheet Metal Works as per Annexure FSMW1 for Kavach Mod II[71]()
Specification : Manufacturing and supply of set of Fabrication and Sheet Metal Works as per Annexure FSMW1 for Kavach Mod II
E
Estab
5) Manufacturing and Supply of Set of Heavy Machining Items as per Annexure MH1 for Kavach MOD II[71]()
Specification : Manufacturing and Supply of Set of Heavy Machining Items as per Annexure MH1 for Kavach MOD II
E
Estab
6) 7110308052 FABRI MACH OF WHEEL BEAM 2025040[71]()
Specification : FABRI.&MACH.OF WHEEL BEAM 2025040.
E
Estab
Category : P
1) Gun Carriage Factory
Name
Specification
Use
Status
1) RING WELDING AND MACHINING BOF 4020632[90]()
Specification : RING WELDING AND MACHINING BOF-4020632
C
Nonestab
2) RING WELDING AND MACHINING BOF 4026964[90]()
Specification : RING WELDING AND MACHINING BOF 4026964
C
Nonestab
Category :
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) PULLER ASSEMBLY DRG NO VMT SK 119 13000 10 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED Qty 01 Set[30]()
Specification : PULLER ASSY. DRG. NO. VMT-SK-119-13000-10. FOR WINDING MACHINE 125MM SCCC (AS PER PART LIST ENCLOSED), Qty: 01 Set
C
Nonestab
2) Structure Assembly Drg No VMT SK 119 7000 10 for Winding Machine 125mm SCCC as per part list enclosed[30]()
Specification : Structure Assembly Drg No VMT SK 119 7000 10 for Winding Machine 125mm SCCC as per part list enclosed
C
Nonestab
3) PNEUMATIC COUPLING ASSEMBLY TO DRG NO VMT SK 119 3000 11 FOR WINDING MACHINE 125 MM SCCC AS PER PART LIST ENCLOSED[30]()
Specification : PNEUMATIC COUPLING ASSEMBLY TO DRG NO VMT SK 119 3000 11 FOR WINDING MACHINE 125 MM SCCC AS PER PART LIST ENCLOSED
C
Nonestab
4) DRIVE ASSY DRG NO VMT SK 119 1000 11 FOR WINDING MACHINE 125 MM SCCC AS PER PART LIST ENCLOSED[30]()
Specification : DRIVE ASSY DRG NO VMT SK 119 1000 11 FOR WINDING MACHINE 125 MM SCCC AS PER PART LIST ENCLOSED
C
Nonestab
5) SETTING ROLLER ASSY DRG NO VMT SK 119 14000 10 FOR WINDING MACHINE 125MM SCCC AS PER PARTLIST ENCLOSED Qty 01 Set[30]()
Specification : SETTING ROLLER ASSY. DRG. NO. VMT-SK 119-14000-10. FOR WINDING MACHINE 125MM SCCC (AS PER PARTLIST ENCLOSED), Qty: 01 Set
C
Nonestab
6) CUTTER UNIT ASSY DRG NO VMT SK 119 11000 10 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED Qty 01 Set[30]()
Specification : CUTTER UNIT ASSY. DRG. NO. VMT-SK-119-11000-10. FOR WINDING MACHINE 125MM SCCC (AS PER PART LIST ENCLOSED, Qty: 01 Set
C
Nonestab
7) CENTER ASSY DRG NO VMT SK 119 16000 12 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED Qty 01 Set[30]()
Specification : CENTER ASSY DRG NO VMT SK 119 16000 12 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED Qty 01 Set
C
Nonestab
8) TANK ASSY DRG NO VMT SK 119 8000 10 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED[30]()
Specification : TANK ASSY DRG NO VMT SK 119 8000 10 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED
C
Nonestab
9) Mandrel Assy Drg No VMT SK 119 10000 11 for Winding Machine 125 mm SCCC as per part list 5 sheets drgs and scope of work enclosed[30]()
Specification : Mandrel Assy Drg No VMT SK 119 10000 11 for Winding Machine 125 mm SCCC as per part list 5 sheets drgs and scope of work enclosed
C
Nonestab
Category :
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 3000593396 MANUFACTURING AND SUPPLY OF FRAME AS PER DRG NO MTSK 207 1100 11[30]()
Specification : MANUFACTURING AND SUPPLY OF FRAME AS PER DRG NO MTSK 207 1100 11
C
Nonestab
Category :
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6331451400 MS TARGET BLOCK FOR PROOFING 145 MM[63]()
Specification : IS:2062 (GRADE E 250A
C
Nonestab
Category :
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0133030109 MS PLATE SIZE 25MM[01]()
Specification : IS 2062-1994
C
Nonestab
Category :
1) Gun Carriage Factory
Name
Specification
Use
Status
1) REAR AXLE ASSY.(9069112351)()
AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
C
NOT ESTAB.
2) FRONT AXLE ASSY.(9069112350)()
AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
C
NOT ESTAB.
Category : DP
463
LOHAAKAR INDUSTRIES
BGVPB4464M
Download
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) BOX STEEL NO. S 6 MK1 DRG.ARDE 2225[65]()
Specification : DRG. NO. ARDE 2225 SHEET NO.3
C
Nonestab
2) BOX 682 MKI W/O LINER IA 896/1[6570120090]()
Specification : IA 1163
C
Nonestab
3) BOX NO.428 MK.1[6570120100]()
Specification : DRG. NO. D.D.(L) 18704
C
Nonestab
4) BOX NO. 582 MK-1[6570127200]()
Specification : IA-1163
C
Nonestab
5) BOX C 28 A STEEL[6570356000]()
Specification : DESIGNERS REF CIA/AMN/1180 PART NO.ISV 357 A
C
Nonestab
6) AMMN.CONT.BOX H-76 MK1 DRGNO 1A 914[6570410000]()
Specification : IA 948
C
Nonestab
7) BOX M 104 MK1 PAINTED OLIVE GREEN[65]()
Specification : IA 1169
C
Nonestab
8) BOX B 184 MK 1 W/O SEPARATOR[6570052000]()
Specification : IA 1169
C
Nonestab
9) AMMN.CONTAINER BOX B-9 A[6570151000]()
Specification : IA 1169
C
Nonestab
10) BOX G 70 MK1(STEEL)OLIVE GREEN.[6570160000]()
Specification : IA 1169
C
Nonestab
Category : p
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CYLINDER FOR PACKING OF FUZE 3KM-EM[65]()
Specification : DRG. NO.NAD 4704/1
C
Nonestab
2) AMMUNITION CONT.CYL.NO 309 MK-2[65]()
Specification : IA 1163
C
Nonestab
Category : p
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) BODY FOR BOMB 51 MM MORTAR HE 2A[60]()
Specification : CQA(A)- 2322
C
Nonestab
2) BOMB 81MM MORTAR B EMPTY BODY[60]()
Specification : CQA(A) 2304 & L 8638-J
C
Nonestab
Category : p
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) TAIL UNIT 8A WITH CAP ARDE-1933 D-7[60]()
Specification : CQA(A) 2324
C
Nonestab
2) TAIL UNIT 1A FOR BOMB 81 MM[60]()
Specification : CQA(A)2308
C
Nonestab
Category : p
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) PLUG REPRESENTING FUZE DA5A[63]()
Specification : DRG.NO.ARDE 2236, DET.NO.16,PART NO.ITV 285
C
Nonestab
Category : p
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CUPS TO DRG NO ARDE 2043 DET NO 5[60]()
Specification : CQA(A) 2804
R
Nonestab
2) COVERING DISC ARDE1925 DET 5 IRW172[60]()
Specification : DRG.NO.ARDE 1925 DET.NO.5 PART NO.IRW- 172
C
Nonestab
Category : p
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) STEEL INSERT FOR 5.56X30MM BALL BUL[60]()
Specification : BS 970 PT.I, 1983 080 M40/709M40 OR ALTERNATE TO SPECN. BS-970 EN 8M
C
Nonestab
2) STEEL INSERT FOR NATO BULLET[60]()
Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012
C
Nonestab
Category : p
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CLOSING DISC TO DRG NO ERDL DRG. 1005 DET NO.8[99]()
Specification : DRG NO ERDL DRG. 1005 DET NO.8 DT 19.11.09
C
Nonestab
2) STEEL WASHER TO DRG.ARDE/2165 DET 3[60]()
Specification : SPECN. ARDE/SPECN/423
C
Nonestab
Category : p
464
MAS PACK LIMITED
TVDM00650G
Download
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6432100002- SET OF COMBUSTIBLE CARTG. CASES FOR FSAPDS ()
DRAWING NO. IRW 5GE
E
Estab.
2) 6432200001 - SET OF COMBUSTIBLE CARTG. CASES FOR HESH ()
DRAWING NO. IRW 4GE
E
Estab.
Category : P
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) 1. COMBUSTIBLE CARTIDGE CASE, IGNITER TUBE, PROPELLANT RETAINING DEVICE (M 91)()
DRG./SPEC NO.:OFN/BMCS/M-91/CCC,DRG./SPEC. NO:OFN/BMCS/M-91/IT, DRG/SPEC NO.:OFN/BMCS/M-91/PRD
C
Estab.
2) 2. COMBUSTIBLE CARTIDGE CASE, IGNITER TUBE, PROPELLANT RETAINING DEVICE (M 92)()
DRG./SPEC NO.:OFN/BMCS/M-92/CCC,DRG./SPEC. NO:OFN/BMCS/M-92/IT, DRG/SPEC NO.:OFN/BMCS/M-92/PRD
C
Estab.
Category : DP
465
TECHNO STEEL & STRIPS
AAIPD9713H
Download
1) Metal and Steel Factory
Name
Specification
Use
Status
1) M S STARTER PLATE SIZE:20MMX1000MM()
AS PER SPECIFICATION
C
0
2) Body Plate Embossed & Trimmed()
As per MSF Drawing No. VA/140/A-for Box G-70, Matl. Specn. IS: 513-1994, Gr-D, CR & Annealed
R
Established
3) CR Steel Sheet Alu. Killed, Annealed, Best Surface Condn.()
As per Specn. IS: 513/1994, Gr-DD
R
Non Established
4) Steel Strips 90mm X 0.8mm Allu. Killed, Best Surface Condn.()
As per Specification IS: 513-1994, Gr-DD
R
Non Established
5) Side Plate Embossed & Trimmed()
As per MSF Drawing No. VA/141/A-for Box G-70, Matl. Specn. IS: 513-1994, Gr-D, CR & Annealed
R
Established
6) Steel Blank to size 125mm X 125 mm X 3.15 (+/- 0.05mm) Thick()
As per Specn. IS: 513/1994, Gr-DD
R
Non Established
Category : P
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) STEEL TAPE BAND 12 7X0 45MM ITEM CODE 0133060104
Description : STEEL TAPE BAND 12 7X0 45MM ITEM CODE 0133060104()
Specification : COLD ROLLED STEEL STRIP (STEEL TAPE BANDING) 12.7 MM WIDTH X 0.45MM THICK(26SWG) IN C.R.STEEL STRIPPING SOFT BLUE FINISHHAVE TENSILE STRENGTH 60 TO 80KG/MM SQR WITH SHEAR EDGE IN COIL,OILED WITH SHELL EXISTS 256 WITH WAXED PAPER AND RESI
R
Estab
Category : p
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ALU STRIP 85X0.3MM IS737 19500 'O' (0615361048)
Description : ALU STRIP 85X0.3MM IS737 19500 'O' (0615361048)()
Specification : ALUMINIUM STRIP 85.0 +/-0.5 MM WIDE X 0.3-0.08 MM THICK IN COILS OF 8 METRES. TO SPECN:IS-737-2008(REV.NO.4) GR.19500CONDTION "O OR BS-1470:1987 GR-1050-A CONDITION "O".MATERIALSHOULD BE SUPPLIED WITH UTS OF 60 MPa MIN
R
Estab
2) SHEET MS 2500X1000X1.6MM IS513CR DD (0121020016)
Description : SHEET MS 2500X1000X1.6MM IS513CR DD (0121020016)()
Specification : C.R.SHEETS TO SPECN:IS-513-2008 (FIFTH REVISION)-DD ANNEALED AND SKIN PASSED CONDITION 2500MM X 1000MM X 1.600 MM.
R
Estab
Category : p
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) STEEL STRIP 40x0point35 mm LF 0121060051
Description : STEEL STRIP 40x0point35 mm LF 0121060051()
Specification : STEEL STRIP SIZE 40 +/-0.5 MM WIDE X 0.35 +/-0.03 MM THICK TO SPECN:IS-513-2008 (FIFTH REVISION) GR.CR-3 OR GD I CS OFBS-1449-SECTION 1.1:1991 QUALITY IN ANNEALED AND SKIN PASSED CONDITION IN COIL OF 50 KG WEIGHT EACH.
R
Estab
Category : p
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) COLD ROLLED BRIGHT ANNEALED STEELSHEET
Description : COLD ROLLED BRIGHT ANNEALED STEELSHEET()
Specification : COLD ROLLED BRIGHT ANNEALED STEEL SHEET MADE FROM FULLY KILLED STEEL AS PER BS: 1449 PT 1 1983 GRADE -43/35 SIZE : 95MM+-0.25 WIDE THICKNESS 2.0MM+-0.06X920+15 MM LONG.( PART NO. ITV-46)
R
Estab
Category : p
466
ETERNAL ALLOY CAST PVT LTD
RKTE00615G
Download
1) Small Arms Factory
Name
Specification
Use
Status
1) Investment Casting Cocking bracket for JVPC[70]()
Specification : INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598*
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Investment Casting for CAP to DRG No. SK-3870*2[01]()
Specification : STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-3870*2 OF 9MM CARBINE 1A1
R
Nonestab
Category :
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) INVESTMENT CASTING OF SLIDING KNOB (RFI SK NO - 9101) FOR12 BORE PAG[70]()
Specification : INVESTMENT CASTING OF SLIDING KNOB (RFI SK NO - 9101) FOR12 BORE PAG
C
Nonestab
Category :
1) Opto Electronic Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING FOR BOARD LF NO 9927099227[99]()
Specification : INVESTMENT CASTING FOR BOARD LF NO 9927099227
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUARD TRIGGER INVESTMENT CASTING TO DRG.NO.RFI.SK-4312*12 required for 0.315[70]()
Specification : AS PER DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG No 64C 2026 250 G3 REQUIRED FOR HOLDER TO DRG No 2A42 02 026 C2026[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 2026 250 G3.
REQUIRED FOR HOLDER TO DRG.No.: 2A42.02.026 (C2026).
C
Nonestab
2) INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.021 (C5021).[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.021 (C5021).
C
Nonestab
3) INVESTMENT CASTING TO DRG No 64C 5021 250 I3 REQUIRED FOR PAWL TO DRG NO 2A42 05 024 C5024[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.024 (C5024).
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG.No.: 62C 6019 250 F3 FOR BRACKET HOLDING FRONT COVER.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 6019 250 F3 FOR BRACKET HOLDING FRONT COVER.
"
C
Nonestab
2) INVESTMENT CASTING TO DRG NO. 62C 7009 250 F3 LEVER SEAR FOR 12.7 A.D. GUN.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG NO. 62C 7009 250 F3 LEVER SEAR FOR 12.7 A.D. GUN.
"
C
Nonestab
3) INVESTMENT CASTING TO DRG.NO.62C 6025 250 F3. HANDLE CATCH FRICTION (A 6025)[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.NO.62C 6025 250 F3. HANDLE CATCH FRICTION (A 6025)
"
C
Nonestab
4) INVESTMENT CASTING TO DRG.No.: 62C 6022 250 E3 FOR BLOCK GUIDE LEVER FEED. (A6022)[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 6022 250 E3 FOR BLOCK GUIDE LEVER FEED. (A6022)
"
C
Nonestab
5) INVESTMENT CASTING TO DRG.No.: 62C 7016 250 F3 FOR TRIGGER.[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 62C 7016 250 F3 FOR TRIGGER.
C
Nonestab
6) INVESTMENT CASTING TO DRG. NO. 62C 5013 250 E3 PAWL BELT HOLDING FOR 12.7 A.D. GUN ( A 5013)[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG. NO. 62C 5013 250 E3
PAWL BELT HOLDING FOR 12.7 A.D. GUN ( A 5013)"
C
Nonestab
7) INVESTMENT CASTING TO DRG No 62C 2463 250 G3 FOR HOUSING EJECTOR[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 2463 250 G3.
FOR HOUSING EJECTOR."
C
Nonestab
8) INVESTMENT CASTING TO DRG. NO. 62C 7102 250 F3 FOR SIGHT BED BODY TRIGGER MECHANISM (A7102) DSCAT No.1005-007167[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG. NO. 62C 7102 250 F3
FOR SIGHT BED BODY TRIGGER MECHANISM (A7102)
DSCAT No.1005-007167"
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG. NO. TEND 2206 * 2 REQD. FOR TRIGGER TO DRG.NO.30P 3051 FOR 40 mm MGL.[70]()
Specification : AS PER DRAWING AND SPECIFICATION.
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG. NO. TEND 2209 ST FOR BLOCK STOCK TO DRG. NO. 30P 5001 FOR 4mm MGL.[70]()
Specification : AS PER DRAWING AND SPECIFICATION
R
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG.NO. TEND 2211*3 REQUIRED FOR PLATE INDEX TO DRG. NO. 30P 1214[70]()
Specification : As per the Drawing and Specification
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Investment casting to DRG. No. TEND 2210*2. Reqd. for HOUSING PLUG GAS to DRG. No. 30P 1401 for 40mm MGL[70]()
Specification : As per Drawing
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*)[70]()
Specification : AS PER TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*)
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG NO TEND 1805STAR2 FOR SLIDE COCKING HANDLE ICR 1290[70]()
Specification : AS PER INVESTMENT CASTING TO DRG. NO. TEND 1805*2 FOR SLIDE COCKING HANDLE (ICR-1290).
C
Nonestab
2) CATCH MAGAZINE INVESTMENT CASTING DS CAT NO 1005 001539 TO DRG NO TEND 1874 ICR 1199 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO TEND.1874. (ICR-1199) (WITH FIRM'S MATERIAL)
C
Nonestab
3) INVESTMENT CASTING TO DRG No 62C 1013 250 D3 SLEEVE HANDLE BASE BARREL FOR 12 7mm A D GUN A 1013[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN.
A 1013
"
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG. NO.SK-3665* REQUIRED FOR REVOLVER SHIELD D.A. NO. 35/04 DT. 09-04-04[01]()
Specification : AS PER DRG.
C
Nonestab
2) Investment Casting for Catch Magazine Drg. No. SK-3527[03]()
Specification : AS PER Drg. No. SK-3527 FOR 9 MM CARBINE
C
Nonestab
3) Steel Investment Casting for CAP to DRG No. SK-3870*2[01]()
Specification : STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-3870*2 OF 9MM CARBINE 1A1
C
Nonestab
4) Investment Casting to DRG No. SK-3713*1 for Guard Back Sight[01]()
Specification : Investment Casting to DRG No. SK-3713*1 for Guard Back Sight
C
Nonestab
5) INVESTMENT CASTING FOR BLOCK TOP TO DRG. NO.SK-3868*.[01]()
Specification : As per DRG.
C
Nonestab
6) INVESTMENT CASTING FOR CAM CYLINDER TO DRG. NO. SK-3411*1 D.A. NO. 10/10 DT. 11-5-10[01]()
Specification : AS PER DRG.
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) Investment Casting for Housing Rear Sight for LMG[01]()
Specification : INVESTMENT CASTING FOR HOUSING REAR SIGHT AS PER DRG NO.SK-3647*1.
C
Nonestab
2) INVESTMENT CASTING OF SLIDE COCKING HANDLE TO DRG.NO. SK-3706/16*2[01]()
Specification : AS PER DRG.
C
Nonestab
3) INVESTMENT CASTING DOVETAIL TO DRG. NO. SK-3706/35.[01]()
Specification : AS PER DRG.
C
Nonestab
4) INVESTMENT CASTING OF HINGE COVER TO DRG. NO-SK-4760/05*1.[01]()
Specification : AS PER DRG.
C
Nonestab
5) INVESTMENT CASTING LUG TRIPOD AS PER DRG NO SK 3706 15[03]()
Specification : AS PER DRG.
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) Investment Casting Cocking bracket for JVPC[70]()
Specification : INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598*
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) Investment Casting of Trigger for Revolver[01]()
Specification : Investment Casting of Trigger SK-5378R Required For Revolver MK-III,D.A. No. 24/09, Dt. 16.07.09
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) Investment Casting for Guard Back Sight for Carbine 9MM[01]()
Specification : Investment Casting to DRG No. SK-3713*1 for Guard Back Sight
C
Nonestab
2) INVESTMENT CASTING OF TRIGEER SK-5378R REQUIRED FOR REVOLVER MK-III D.A. NO. 24/09, DT. 16.07.09[01]()
Specification : AS PER DRG.
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG NO.SKM-775*1 FOR STOP CARTRIDGE OF MAG 7.62MM[14]()
Specification : AS PER DRG.
C
Nonestab
2) INVESTMENT CASTING TO DRG NO SKM 752 2 FOR BRACKET CARRYING HANDLE[15]()
Specification : INVESTMENT CASTING TO DRG.NO.SKM-752*2 FOR BRACKET CARRYING HANDLE
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) Investment Casting Bracket fore Sight for JVPC[01]()
Specification : Investment Casting Bracket Fore Sight JVPC 5.56mm as per Drg. No. SK-JVPC-6004*
C
Nonestab
2) Investment Casting Housing Rear Sight for JVPC[01]()
Specification : INVESTMENT CASTING HOUSING REAR SIGHT FOR JVPC 5.56MM AS PER DRG.NO. SK-JVPC-6005
C
Nonestab
3) INVESTMENT CASTING FOR MOUNTING RAIL OF JVPC[01]()
Specification : INVESTMENT CASTING FOR MOUNTING RAIL OF JVPC 5.56X30MM AS PER DRAWING NO.SK JVPC 919.
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) IC KNOB REGULATOR DRG No. SKM 754*2[02]()
Specification : AS PER DRG.
C
Nonestab
2) IC BODY COCKING Slide SKM 738 4 for MAG[01]()
Specification : I.C BODY COCKING SLIDE SKM-738*4
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) IC OF SLIDE (RETRACTING) DRG.NO. SK-5797[01]()
Specification : AS PER DRG.
R
Estab
2) IC FOR BRACKET TO DRG NO SK 4760 2 IN HEAT TREATED CONDITION[01]()
Specification : I.C. FOR BRACKET TO DRG. NO. SK- 4760/2*. IN HEAT TREATED CONDITION. D.A. NO. 84/05
C
Estab
3) IC STEM CARRYING HANDLE[01]()
Specification : INVESTMENT CASTING TO DRG NO.SK-4523/1*1. (I.C.OF STEM CARRYING HANDLE)
C
Estab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) IC SKM 754 2 FOR KNOB GAS REGULATOR SCREW[28]()
Specification : I.C.SKM-754*2 FOR KNOB GAS REGULATOR SCREW
C
Estab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) BODY(IC) OF REVOLVER MK-III DRG NO SK-5375R*3 D.A. NO. 35/08 , DT. 12-05-08[04]()
Specification : DRG. No. SK-5375R*3D
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING FOR LEVER LOCKING TO DRG. NO.SK-3715*[01]()
Specification : As per Drg.
C
Nonestab
2) INVESTMENT CASTING OF LEVER CHANGE TO DRG. NO. SK-3706/9*2[01]()
Specification : AS PER DRG.
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) BODY IC of REVOLVER MK III DRG NO SK 5375R3[04]()
Specification : BODY(IC) OF REVOLVER MK-III DRG NO SK-5375R*3 D.A. NO. 35/08 , DT. 12-05-08
C
Nonestab
2) IC SHIELD FOR REVOLVER[01]()
Specification : Investment Casting To Drg. No.SK-3665* Required For Revolver Shield, D.A. No. 35/04 DT. 09-04-04
C
Nonestab
3) PLATE BODY IC OF REV MK III[01]()
Specification : PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1
C
Nonestab
4) HAMMER IC FOR REVOLVER MK III[01]()
Specification : HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1,
R
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) IC FEED ARM SKM 769 2[04]()
Specification : I.C FEED ARM TO DRG.NO.SKM-769*2
C
Nonestab
2) IC BRACKET for LMG[03]()
Specification : IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition
C
Nonestab
3) IC BODY COCKING Slide SKM 738 4 for MAG[01]()
Specification : I.C BODY COCKING SLIDE SKM-738*4
C
Nonestab
Category :
1) Opto Electronic Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING FOR BASE TO DRG NO T-01/IC/8075939/236 M1 (LF 9927098800)[99]()
Specification : INVESTMENT CASTING FOR BASE TO DRG NO T-01/IC/8075939/236 M1 (LF 9927098800)
C
Nonestab
Category : p
1) Opto Electronic Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING FOR BODY LF NO 7522109200[75]()
Specification : INVESTMENT CASTING FOR BODY LF NO 7522109200
C
Nonestab
2) INVESTMENT CASTING BRACKET LF NO 7522112000[75]()
Specification : INVESTMENT CASTING BRACKET LF NO 7522112000
C
Nonestab
3) INVESTMENT CASTING AXLE LF NO 7522114000[75]()
Specification : INVESTMENT CASTING AXLE LF NO 7522114000
C
Nonestab
4) INVESTMENT CASTING HANDLE LF NO 7522110200[75]()
Specification : INVESTMENT CASTING HANDLE LF NO 7522110200
C
Nonestab
5) INVESTMENT CASTING LF NO 7522110400[75]()
Specification : INVESTMENT CASTING LF NO 7522110400
C
Nonestab
Category : p
1) Opto Electronic Factory
Name
Specification
Use
Status
1) BODY CASTING LF NO 7526031001[75]()
Specification : BODY CASTING LF NO 7526031001
C
Nonestab
2) BRACKET LF NO 7532336300[75]()
Specification : BRACKET LF NO 7532336300
C
Nonestab
Category : p
1) Opto Electronic Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING OF HOLDER LF NO 9927096407[99]()
Specification : INVESTMENT CASTING OF HOLDER LF NO 9927096407
C
Nonestab
2) CARRIAGE LF NO 9927096411[99]()
Specification : CARRIAGE LF NO 9927096411
C
Nonestab
3) INV CASTING BRACKET LF NO 9927095731[99]()
Specification : INV CASTING BRACKET LF NO 9927095731
C
Nonestab
4) INV CASTING BRACKET LF NO 9927095567[99]()
Specification : INV CASTING BRACKET LF NO 9927095567
C
Nonestab
Category : p
1) Opto Electronic Factory
Name
Specification
Use
Status
1) HANDLE CASTING LF NO 7526030300[75]()
Specification : HANDLE CASTING LF NO 7526030300
C
Nonestab
2) INV CASTING HANDLE LF NO 9927068879[99]()
Specification : INV CASTING HANDLE LF NO 9927068879
C
Nonestab
Category : p
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG NO.ODD/C/1000 FOR RING FOOT LARGE DRG NO.ODD/C/1000[74]()
Specification : INVESTMENT CASTING TO DRG NO.ODD/C/1000
FOR RING FOOT LARGE DRG NO.ODD/C/1000
C
Nonestab
Category : ddp
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG NO ODD C 1000 FOR RING FOOT LARGE DRG NO ODD C 1000[74]()
Specification : INVESTMENT CASTING TO DRG NO.ODD/C/1000
FOR RING FOOT LARGE DRG NO.ODD/C/1000
C
Nonestab
2) INVESTMENT CASTING FOR LEVER TO DRG NO ODD C 836[74]()
Specification : INVESTMENT CASTING FOR LEVER TO DRG NO. ODD/C/836
C
Nonestab
3) INVESTMENT CASTING FOR HOLDER DRG NO ODD C 899 2[74]()
Specification : INVESTMENT CASTING FOR HOLDER . DRG NO. ODD/C/899/2.
C
Nonestab
4) INVESTMENT CASTING FOR BODY ODD C 897 4[74]()
Specification : INVESTMENT CASTING FOR BODY.ODD/C/897/4
C
Nonestab
5) STEEL INVESTMENT CASTING FOR DOVETAIL FEMALE TO DRG ODD C 997[74]()
Specification : STEEL INVESTMENT CASTING FOR DOVETAIL FEMALE TO DRG.ODD/C/997
C
Nonestab
6) INVESTMENT CASTING FOR HOUSING TO DRG NO ODD C 881 5[74]()
Specification : INVESTMENT CASTING FOR HOUSING TO DRG NO.ODD/C/881/5.
C
Nonestab
7) INVESTMENT CASTING FOR BODY TO DRG NO ODD C 919 2[74]()
Specification : INVESTMENT CASTING FOR BODY TO DRG NO.ODD/C/919/2.
C
Nonestab
8) INVESTMENT CASTING FOR BODY TO DRG NO ODD C 905 3[74]()
Specification : INVESTMENT CASTING FOR BODY TO DRG.NO.ODD/C/905/3.
C
Nonestab
9) INVESTMENT CASTING FOR COVER TO DRG NO ODD C 906 2[74]()
Specification : INVESTMENT CASTING FOR COVER TO DRG NO. ODD/C/906/2
C
Nonestab
10) MS CASTING OR ALLLOY STEEL CASTING FOR BODY INVESTMENT CASTING DRG NO ODD C 904 2 1030 1998 GDE 340 570 N[00]()
Specification : MS CASTING OR ALLLOY STEEL CASTING FOR BODY(INVESTMENT CASTING) DRG.NO.ODD/C/904/2 1030-1998 GDE 340 570 N
C
Nonestab
Category : ddp
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) HOUSING MECHANICAL DRIVE INVESTMENT CASTING DRG NO ODD C 732 1[00]()
Specification : HOUSING MECHANICAL DRIVE INVESTMENT CASTING DRG.NO.ODD/C/732/1
C
Nonestab
2) INVESTMENT CASTING BRACKET AS PER DRG NO ODD C 580 4[00]()
Specification : INVESTMENT CASTING BRACKET AS PER DRG.NO.ODD/C/580/4
C
Nonestab
3) INVESTMENT CASTING BEARING BOTTOM AS PER DRG NO ODD C 581 3[00]()
Specification : INVESTMENT CASTING BEARING BOTTOM AS PER DRG.NO.ODD/C/581/3
C
Nonestab
4) INVESTMENT CASTING BASE AS PER DRG NO ODD C 582 4[00]()
Specification : INVESTMENT CASTING BASE AS PER DRG.NO.ODD/C/582/4
C
Nonestab
5) STEEL INVESTMENT CASTING FOR CLAMP TO DRG NO ODD C 778 2[00]()
Specification : STEEL INVESTMENT CASTING FOR CLAMP TO DRG. NO. ODD/C/778/2
C
Nonestab
6) INVESTMENT CASTING FOR BODY WITHOUT TUBE TO DRG NO ODD C 624[00]()
Specification : INVESTMENT CASTING FOR BODY WITHOUT TUBE TO DRG NO.ODD/C/624
C
Nonestab
7) INVESTMENT CASTING FOR BRACKET FOR MOUNT TO DRG NO IRDE 2609 1 ODD C 895 2[74]()
Specification : INVESTMENT CASTING FOR BRACKET FOR MOUNT TO DRG NO.IRDE-2609/1,ODD/C/895/2
C
Nonestab
8) INVESTMENT CASTING FOR BRACKET SUPPORTIN G FOR MOUNT TO DRG NO IRDE 2604 8 ODD C 898[74]()
Specification : INVESTMENT CASTING FOR BRACKET SUPPORTIN G FOR MOUNT TO DRG NO.IRDE-2604/8 ODD/C/898
C
Nonestab
9) INVESTMENT CASTING TO DRG NO ODD C 954 FOR DOVETAIL FEMALE IRDE 2623 2[74]()
Specification : INVESTMENT CASTING TO DRG NO.ODD/C/954 FOR DOVETAIL FEMALE IRDE-2623/2
C
Nonestab
Category : ddp
1) Small Arms Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING OF BRACKET FOR TR1POD. AS PER DRG. NO.SK-3706/3. DA NO.204/2K DT.06.12.2K.[01]()
Specification : AS PER DRG.
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) Investment Casting Cocking bracket for JVPC[70]()
Specification : INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598*
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG. NO.SK-3665* REQUIRED FOR REVOLVER SHIELD D.A. NO. 35/04 DT. 09-04-04[01]()
Specification : AS PER DRG.
C
Nonestab
2) Investment Casting for Catch Magazine Drg. No. SK-3527[03]()
Specification : AS PER Drg. No. SK-3527 FOR 9 MM CARBINE
C
Nonestab
3) Investment Casting to DRG No. SK-3713*1 for Guard Back Sight[01]()
Specification : Investment Casting to DRG No. SK-3713*1 for Guard Back Sight
C
Nonestab
4) INVESTMENT CASTING FOR BLOCK TOP TO DRG. NO.SK-3868*.[01]()
Specification : As per DRG.
C
Nonestab
5) INVESTMENT CASTING FOR CAM CYLINDER TO DRG. NO. SK-3411*1 D.A. NO. 10/10 DT. 11-5-10[01]()
Specification : AS PER DRG.
C
Nonestab
6) INVESTMENT CASTING OF SLIDE COCKING HANDLE TO DRG.NO. SK-3706/16*2[01]()
Specification : AS PER DRG.
C
Nonestab
7) INVESTMENT CASTING OF GAS REGULATOR TO DRG.NO. SK-3706/8*[01]()
Specification : AS PER DRG.
C
Nonestab
8) INVESTMENT CASTING DOVETAIL TO DRG. NO. SK-3706/35.[01]()
Specification : AS PER DRG.
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING FOR LEVER LOCKING TO DRG. NO.SK-3715*[01]()
Specification : As per Drg.
C
Nonestab
2) INVESTMENT CASTING OF TRIGEER SK-5378R REQUIRED FOR REVOLVER MK-III D.A. NO. 24/09, DT. 16.07.09[01]()
Specification : AS PER DRG.
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG NO. SKM-755*4. FOR CATCH CARRYING HANDLE[01]()
Specification : AS PER DRG.
C
Nonestab
2) INVESTMENT CASTING TO DRG NO SKM 753 3 FOR REAR SIGHT RAMP[14]()
Specification : INVESTMENT CASTING TO DRG NO.SKM-753*3 FOR REAR SIGHT RAMP.
C
Nonestab
Category :
1) Small Arms Factory
Name
Specification
Use
Status
1) Investment Casting for Catch Magazine for Carbine 9MM[03]()
Specification : AS PER Drg. No. SK-3527 FOR 9 MM CARBINE
C
Nonestab
2) Steel Investment Casting for CAP for Carbine 9mm[01]()
Specification : STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-3870*2 OF 9MM CARBINE 1A1
C
Nonestab
3) Investment Casting for Guard Back Sight for Carbine 9MM[01]()
Specification : Investment Casting to DRG No. SK-3713*1 for Guard Back Sight
C
Nonestab
Category :
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) INVESTMENT CASTING OF SLIDING KNOB (RFI SK NO - 9101) FOR12 BORE PAG[70]()
Specification : INVESTMENT CASTING OF SLIDING KNOB (RFI SK NO - 9101) FOR12 BORE PAG
C
Nonestab
Category :
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) INVESTMENT CASTING OF TRIGGER FOR 12 BORE PAG[70]()
Specification : INVESTMENT CASTING OF TRIGGER (RFI SK-9100) FOR 12 BORE PAG, MATERIAL- BS:3146 PART I 1974 CLASS 5 GRADE A
C
Nonestab
Category :
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) INVESTMENT CASTING FOR SLIDE RETRACTINGTO FOR RIFLE 5 56MM INSAS[79]()
Specification : INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.5709*14FOR RIFLE 5.56MM INSAS
C
Nonestab
Category :
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) INVESTMENT CASTING FOR TRIGGER OF TEAR GAS GUN[70]()
Specification : INVESTMENT CASTING FOR TRIGGER OF TEAR GAS GUN FROM TRADE SOURCES RFI SK NO. -9093-GG/A
C
Nonestab
Category :
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) INVESTMENT CASTING HINGE COVER FOR INSAS[70]()
Specification : INVESTMENT CASTING TO RFI SK. NO. 6097*12 FOR HINGE COVER.FOR RLFLE 5.56MM INSAS
C
Nonestab
Category :
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) INVESTMENT CASTING OF TRIGGER LOCKING BRACKET(RFI SK NO - 9102) FOR 12 BORE PAG.[70]()
Specification : INVESTMENT CASTING OF TRIGGER LOCKING BRACKET(RFI SK NO - 9102) FOR 12 BORE PAG.
C
Nonestab
2) INVESTMENT CASTING OF CONNECTOR BUTT EXR OF RIFLE 5.56MM EXCALIBUR MK.1[70]()
Specification : BS
C
Nonestab
3) INVESTMENT CASTING OF BODY FOR 12 BORE PAG.[70]()
Specification : MAT. BS: 3146 PART I 1974 CLASS 5 GRADE 'A'
C
Nonestab
4) INVESTMENT CASTING OF HOUSING SIGHT REAR FOR RIFLE 5.56MM INSAS.[70]()
Specification : INVESTMENT CASTING OF HOUSING SIGHT REAR TO RFI SK. NO. 6093*6. (LATEST DC. NIL DT.30/6/03) FOR RIFLE 5.56MM INSAS.
C
Nonestab
5) INVESTMENT CASTING OF LEVER CHANGE FOR RIFLE 5.56MM INSAS.[70]()
Specification : INVESTMENT CASTING OF LEVER CHANGE TO RFI SK-4686*9 (LATEST DC. NIL DT.30/6/03) FOR RIFLE 5.56MM INSAS.
C
Nonestab
Category :
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) INVESTMENT CASTING OF TRIGGER ( RFI SK 9100)FOR 12 BORE PAG[70]()
Specification : INVESTMENT CASTING OF TRIGGER ( RFI SK 9100)FOR 12 BORE PAG
C
Nonestab
2) INVESTMENT CASTING OF RECEIVER FOR 0.32[70]()
Specification : bs
C
Nonestab
3) INVESTMENT CASTING FOR CATCH SAFETY FOR PISTOL AUTO 9MM 1A.[70]()
Specification : INVESTMENT CASTING FOR CATCH SAFETY TO RFI. SK.. NO. 3571*3 FOR PISTOL AUTO 9MM 1A.
C
Nonestab
4) INVESTMENT CASTING TO RFI SK. NO. 6097*12 FOR HINGE COVER.FOR RLFLE 5.56MM INSAS[70]()
Specification : AS PER DRAWING
C
Nonestab
5) INVESTMENT CASTING OF BODY TO RFI SK NO. 6830/C*5 FOR PISTOL AUTO 9MM 1A[70]()
Specification : AS PER DRAWING
C
Nonestab
6) INVESTMENT CASTING OF CATCH MAGAZINE TO RFI SK.NO.5743*5(DC RFI NO.04/004/07). FOR .315[70]()
Specification : AS PER DRAWING
C
Nonestab
7) INVESTMENT CASTINGS OF BOLT LOCKING TO RFI.SK.NO.3712/C(LATEST DC-NIL DT.30/6/03) FOR.315[70]()
Specification : AS PER DRAWING
C
Nonestab
8) INVESTMENT CASTING OF GUARD TRIGGER TO RFI SK.NO.4312*12(LATEST DC.04/003/05 DT.17/02/05).FOR .315[70]()
Specification : AS PER DRAWING
C
Nonestab
9) INVESTMENT CASTING OF HANDLE BOLT BREECH AS PER RFI SK NO8273*-T .FOR 30-06 SPORTING RIFLE[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG NO RFI SK 8972 G FOR 12 BORE PUMP ACTION GUN[70]()
Specification : INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG.NORFI.SK-8972-G. FOR 12 BORE PUMP ACTION GUN
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INV CASTING TO DRG NO 62C 1214 250 E 3 HANDLE BASE BARREL A 1214 FOR 12 7 MM AD GUN[70]()
Specification : AS PER DRG OF "INV.CASTING TO DRG.NO.62C 1214 250 E 3 HANDLE BASE BARREL (A 1214)
FOR 12.7 MM AD GUN.
"
C
Nonestab
2) INVESTMENT CASTING TO DRG No 62C 1013 250 D3 SLEEVE HANDLE BASE BARREL FOR 12 7mm A D GUN A 1013[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN.
A 1013
"
C
Estab
3) INVESTMENT CASTING TO DRG No 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT
"
C
Nonestab
4) INVESTMENT CASTING TO DRG No 62C 2463 250 G3 FOR HOUSING EJECTOR[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 2463 250 G3.
FOR HOUSING EJECTOR."
C
Estab
5) INVESTMENT CASTING TO DRG No 64C 1024 250 H3[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG No 64C 1024 250 H3
C
Nonestab
6) INVESTMENT CASTING TO DRG No 64C 2026 250 G3 REQUIRED FOR HOLDER TO DRG No 2A42 02 026 C2026[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 2026 250 G3.
REQUIRED FOR HOLDER TO DRG.No.: 2A42.02.026 (C2026).
C
Estab
7) INVESTMENT CASTING TO DRG No 64C 5014 250 I3 REQUIRED FOR CARRIER TO DRG No 2A42 05 014 C5014[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 5014 250 I3. REQUIRED FOR CARRIER TO DRG.No. 2A42 05 014 (C5014)
C
Nonestab
8) INVESTMENT CASTING TO DRG No 64C 5021 250 I3 REQUIRED FOR PAWL TO DRG NO 2A42 05 024 C5024[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.024 (C5024).
C
Estab
9) INVESTMENT CASTING TO DRGNo 64C 5028 250 H3 REQD FOR CONNECTING LINK RIGID DRG No 2A42 05 028 C5028[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5028 250 H3. REQD FOR CONNECTING LINK RIGID (DRG.No. 2A42.05.028) (C5028)
C
Nonestab
10) INVESTMENT CASTING TO DRGNo 64C 5033 250 G3 REQUIRED FOR CONNECTING LINK RIGID DRG NO 2A42 05 033 C5033[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 5033 250 G3. REQUIRED FOR CONNECTING, LINK, RIGID.
(DRG.NO. 2A42 05 033) C5033.
C
Nonestab
11) INVESTMENT CASTING TO DRG NO 64C 5089 250 G3 REQD FOR CATCH BODY TO DRG NO 2A42 05 089 C5089[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG NO 64C 5089 250 G3.
REQD FOR: CATCH BODY TO DRG NO 2A42.05.089 (C5089)
C
Nonestab
12) INVESTMENT CASTING TO DRG No 64C 5111 250 K3 ALT REQUIRED FOR HANDLE TO DRG No 2A42 05 111 C5111[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5111 250 K3 ALT. REQUIRED FOR HANDLE TO DRG.No. 2A42 05 111 (C5111)
C
Nonestab
13) INVESTMENT CASTING TO DRG No 64C 2028 250 J3 REQUIRED FOR BRAKE TO DRG No 2A42 02 028 C2028[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 2028 250 J3.
REQUIRED FOR: BRAKE TO DRG.No.: 2A42.02.028 (C2028)
C
Nonestab
Category :
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) LEVER TO 3806102337[38]()
Specification : INVESTMENT CASTING
C
Nonestab
2) RIGHT HAND SIDE MEMBER TO 3806801411[38]()
Specification : INVESTMENT CASTING
C
Nonestab
3) SEAT TO 3806807075[38]()
Specification : INVESTMENT CASTING
C
Nonestab
4) GUIDE TO 3806102389[38]()
Specification : INVESTMENT CASTING
C
Nonestab
5) LEVER TO 3806102338[38]()
Specification : INVESTMENT CASTING
C
Nonestab
6) SUCTION DUCT RH TO 3806801410[38]()
Specification : INVESTMENT CASTING
C
Nonestab
7) SUCTION LH TO 3806801412[38]()
Specification : INVESTMENT CASTING
C
Nonestab
8) LH GUIDE TO 3801201107[38]()
Specification : INVESTMENT CASTING
C
Nonestab
9) LEVER TO 3806102432[38]()
Specification : INVESTMENT CASTING
C
Nonestab
10) BOSS TO 3806804618[38]()
Specification : INVESTMENT CASTING
C
Nonestab
11) BRACKET TO 3801021066[38]()
Specification : INVESTMENT CASTING
C
Nonestab
12) BRACKET TO 3801015048[38]()
Specification : INVESTMENT CASTING
C
Nonestab
Category :
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) GEAR RATCHET LF 3806420111[38]()
Specification : 172.64.024-1A/C
C
Nonestab
Category :
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) BRACKET RH TO 3801063041[38]()
Specification : 175.63.036-A/C
R
Nonestab
2) BRACKET LH TO 3801063042[38]()
Specification : 175.63.037-A/C
C
Nonestab
3) BOSS TO 3806211194[38]()
Specification : INVESTMENT CASTING
C
Nonestab
4) BRACKET TO 3806802096[38]()
Specification : 434.03.141-1/C
C
Nonestab
5) BRACKET TO 3806807056[38]()
Specification : 172.10.030/C
C
Nonestab
6) RATCHET INVESTMENT CASTING TO 3806417106[38]()
Specification : 54.22.012B/C
C
Nonestab
7) SUPPORT TO 3806417160[38]()
Specification : 172.61.025-1/C
C
Nonestab
8) COVER PLATE TO 3806102370[38]()
Specification : 175.02.353-1/C
C
Nonestab
9) BRACKET TO 3806420113[38]()
Specification : 175.64.045/C
C
Nonestab
10) BRACKET CASTING TO 3806214217[38]()
Specification : 172.65.069/C
C
Nonestab
11) FORK TO 3801021026[38]()
Specification : 188.21.058-1/C
C
Nonestab
12) BRACKET TO 3806211079[38]()
Specification : 172.28.030-1A/C
C
Nonestab
13) FORK CASTING TO 3801218044[38]()
Specification : 185.18.049/C
C
Nonestab
14) FLANGE TO 3801021085[38]()
Specification : 188.21.108/C
C
Nonestab
15) FLANGE TO 3806113255[38]()
Specification : 176.23.054-1/C
C
Nonestab
16) BUSHING CASTING TO 3806802051[38]()
Specification : 172.03.079/C
C
Nonestab
17) BRACKET CASTING TO 3806804227[38]()
Specification : 175.04.234/C
C
Nonestab
18) BRACKET TO 3806211137[38]()
Specification : 172.28.129/C
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC TO DRG.NO.:TEND.720 F/ALT FOR LEAF BACKSIGHT (ICR-1330)[70]()
Specification : AS PER DRG.NO.:TEND.720 F/ALT FOR LEAF BACKSIGHT (ICR-1330)
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG No 62C 1012 250 E3 FOR FLASH HIDER[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1012 250 E3. FOR FLASH HIDER
"
C
Nonestab
2) CASTING TO DRG NO 62C 2212 250 D3 BRACKET HANDLE FOR 12 7 MM AD GUN A 2212[70]()
Specification : AS PER DRG OF "CASTING TO DRG NO 62C 2212 250 D3 BRACKET HANDLE FOR 12.7 MM AD GUN (A 2212)
"
C
Nonestab
3) INVESTMENT CASTING TO DRG.NO.62C 6023 250 E3 CATCH FRICTION COVER FEED (A 6023) FOR 12.7 MM AD GUN.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.NO.62C 6023 250 E3 CATCH FRICTION COVER FEED (A 6023)
FOR 12.7 MM AD GUN.
"
C
Nonestab
4) INVESTMENT CASTING TO DRG.No.: 62C 7101 250 J3. FOR BODY TRIGGER MECHANISM (A7101) OF 12.7mm A.D. GUN.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 7101 250 J3. FOR BODY TRIGGER MECHANISM (A7101) OF 12.7mm A.D. GUN.
"
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC TO DRG NO TEND 1100 D FOR RAMP BACKSIGHT ICR 1253[70]()
Specification : AS PER DRG NO.:TEND 1100 D FOR RAMP BACKSIGHT(ICR-1253)
C
Nonestab
2) CATCH MAGAZINE INVESTMENT CASTING DS CAT NO 1005 001539 TO DRG NO TEND 1874 ICR 1199 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO TEND.1874. (ICR-1199) (WITH FIRM'S MATERIAL)
C
Estab
3) INVESTMENT CASTING TO DRG No 62C 1013 250 D3 SLEEVE HANDLE BASE BARREL FOR 12 7mm A D GUN A 1013[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN.
A 1013
"
C
Estab
4) INVESTMENT CASTING TO DRG No 62C 1012 250 E3 FOR FLASH HIDER[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1012 250 E3. FOR FLASH HIDER
"
C
Nonestab
5) INVESTMENT CASTING TO DRG No 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT
"
C
Estab
6) INVESTMENT CASTING TO DRG No 64C 5014 250 I3 REQUIRED FOR CARRIER TO DRG No 2A42 05 014 C5014[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 5014 250 I3. REQUIRED FOR CARRIER TO DRG.No. 2A42 05 014 (C5014)
C
Estab
7) INVESTMENT CASTING TO DRGNo 64C 5033 250 G3 REQUIRED FOR CONNECTING LINK RIGID DRG NO 2A42 05 033 C5033[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 5033 250 G3. REQUIRED FOR CONNECTING, LINK, RIGID.
(DRG.NO. 2A42 05 033) C5033.
C
Estab
8) INVESTMENT CASTING TO DRG NO 64C 5089 250 G3 REQD FOR CATCH BODY TO DRG NO 2A42 05 089 C5089[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG NO 64C 5089 250 G3.
REQD FOR: CATCH BODY TO DRG NO 2A42.05.089 (C5089)
C
Estab
9) INVESTMENT CASTING TO DRG No 64C 2028 250 J3 REQUIRED FOR BRAKE TO DRG No 2A42 02 028 C2028[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 2028 250 J3.
REQUIRED FOR: BRAKE TO DRG.No.: 2A42.02.028 (C2028)
C
Estab
10) INVESTING CASTING FOR CHANGE LEVER LH[70]()
Specification : INVESTING CASTING FOR CHANGE LEVER LH DRAWING TEND 2257 STAR 5
R
Nonestab
11) IC FRONT SIGHT BLOCK AS PER DRG NO IC K 1207[70]()
Specification : IC FRONT SIGHT BLOCK AS PER DRG NO. IC K 1207 FOR 7.62 MM TAR
R
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC FOR BLOCK LOCATING TO DRG NO. TEND 2212*3[70]()
Specification : AS PER DRAWING.
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC TO DRG NO TEND 255E FOR LOCATING PIECE ICR1505[70]()
Specification : AS PER IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC PISTOL GRIP BASE AS PER DRG NO IC1106[70]()
Specification : AS PER DRG NO K-IC-1106
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC TO DRG NO TEND 1100 D FOR RAMP BACKSIGHT ICR 1253[70]()
Specification : AS PER DRG NO.:TEND 1100 D FOR RAMP BACKSIGHT(ICR-1253)
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC TO DRG.NO.:TEND.920 D FOR TRIGGER.[70]()
Specification : AS PER DRG No.TEND 920D ICR -1238
C
Nonestab
2) IC TO DRG NO TEND 1100 D FOR RAMP BACKSIGHT ICR 1253[70]()
Specification : AS PER DRG NO.:TEND 1100 D FOR RAMP BACKSIGHT(ICR-1253)
C
Nonestab
3) IC TO DRG NO TEND 658 G FOR LEVER CHANGE ICR 1312 WTIH FIRMS MATERIAL[70]()
Specification : AS PER DRG.NO.:TEND.658 G FOR LEVER CHANGE. (ICR-1312)(WTIH FIRM'S MATERIAL)
C
Nonestab
4) IC TO DRG.NO.:TEND.720 F/ALT FOR LEAF BACKSIGHT (ICR-1330)[70]()
Specification : AS PER DRG.NO.:TEND.720 F/ALT FOR LEAF BACKSIGHT (ICR-1330)
C
Nonestab
5) IC TO DRG NO TEND 1141 FOR CATCH COCKING HANDLE ICR 1287[70]()
Specification : AS PER IC TO DRG.NO:TEND.1141 FOR CATCH COCKING HANDLE. (ICR-1287)
C
Nonestab
6) IC TO DRG NO TEND 921 E FOR GRIP CATCH ICR1297 WITH FIRMS MATERIAL[70]()
Specification : AS PER IC TO DRG.NO.:TEND.921 E FOR GRIP CATCH (ICR-1297) (WITH FIRM'S MATERIAL)
C
Nonestab
Category :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC Leaf Back Sight for 7POINT62mm[70]()
Specification : TE NO. D222 BO0205
R
Nonestab
2) IC TO DRG NO TEND 922 F FOR SLIDE ICR 1328 1005 001604[70]()
Specification : AS PER IC TO DRG.NO.:TEND.922 F FOR SLIDE.(ICR-1328) 1005-001604
C
Nonestab
3) IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO K IC 4007[70]()
Specification : IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007
C
Nonestab
4) IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 STAR 4[70]()
Specification : IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 STAR 4
C
Nonestab
5) IC FOR 14 5MM MUZZLE BRAKE[70]()
Specification : As per OFB requirements
R
Nonestab
6) IC FOR 20MM MUZZLE BRAKE[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
Category :
467
Swadeshi Canvas Udyog
AAGFS0879P
Download
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CORD NYLON VARIOUS()
AS PER REQUIREMENT & SPECIFICATION
R
2) CORD NYLON BRAIDED VARIOUS()
AS PER REQUIREMENT & SPECIFICATION
R
Category : S
468
Jakson Limited
DELJ04447C
Download
1) Gun Carriage Factory
Name
Specification
Use
Status
1) MOD ENGINE HOUSING TO INTEGRATE CUM[90]()
Specification : MOD ENGINE HOUSING TO INTEGRATE CUMMINS ENGINE FOR 155MM FH
GUNS
C
Nonestab
Category :
1) Gun Carriage Factory
Name
Specification
Use
Status
1) INDIGENOUS ENGINE WITH ACCESSORIES AS PER LIST ATTACHED[90]()
Specification : INDIGENOUS ENGINE WITH ACCESSORIES.AS PER LIST ATTACHED
C
Estab
Category :
469
Vishwa Traders
ACAPA1122F
Download
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) 8340-001117, FOUR WAY JOINT FOR TENT EXTENDABLE FRAME SUPPORTED()
UNSEALED SPECN.NO. CQA(GS)/US/467(b) (5986/PK DT. 8.9.2003)
R
2) 8340-001118, THREE WAY JOINT FOR ROOF POLE FOR TENT EXTENDABLE FRAME SUPPORTED()
UNSEALED SPECN.NO. CQA(GS)/US/467(b) (5986/PK DT. 8.9.2003)
R
3) 8340-01116,THREE WAY JOINT WITH BASE PLATE FOR TENT EXTANDABLE FRAME SUPPORTED()
IS: 617 DESIGN 5500 SOLUTION TREATED (W) CONDITION DULY
R
4) FOUR WAY JOINT ALUMINIUM ALLOY DIE CASTING TO IS: 617()
AS PER REQUIREMENT & SPECIFICATION
R
5) "U" PIN()
CQA(GS)/US/467(B),CADMIUM PLATED AS PER IS:1572-1986
R
6) BUCKLES ALU. ALLOY. OR ATTACHMENTS QR OR RINGS VARIOUS()
AS PER REQUIREMENT & SPECIFICATION
R
7) HAMMERS VARIOUS()
AS PER REQUIREMENT & SPECIFICATION
R
8) CRATE WOOD PACKING STYLE NO. 5, CLASS-A INTERNAL SIZE 620 MM L X 350 MM H X 350 MM W DRG. NO. SK 927()
IS: 3071-1981 (FROM CHIR WOOD)
R
Established
9) CRATE WOOD STYLE NO 5, CLASS-A,TO INTERNAL SIZE: 1900 MM L X 215 H X 265 MM W SK-842()
IS: 3071-1981 (CHIR WOOD)
R
Established
10) CHIMNEY SEGMENT OR ELBOW()
AS PER REQUIREMENT & SPECIFICATION
R
Established
11) FOUR WAY MILD STEEL JOINT()
PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015
R
Non Established
12) THREE WAY MILD STEEL JOINT WITH BASE PLATE ()
PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015
R
Non Established
13) THREE WAY ROOF POLE MILD STEEL JOINT()
PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015
R
Non Established
14) TWISTED PINS()
PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015
R
Non Established
15) PIN TENT CARBON STEEL SMALL 8340-000508()
IND/GS/1630 (5836/PK) AND ZINC COATING BY HOTDIP GALVANIZED TO IS:4826-1979
R
Non Established
Category : DP
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX C-235 (STEEL) FOR BOMB 25 LBS (6570190100)()
BOX C-235 (STEEL) WITH 10MM HOLES (22 NOS) TO DRG.NO. ARM-1513 D1 R.NO. 1 DT. 26/04/2004 SPECN: IA-1169 (n) DC-35576-A AIDE MEMOIRE-P/11
C
NOT ESTABLISHED
Category : P
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) UNIVERSAL MEMBER FOR TEFS()
CQA(GS)/US/467(b)
C
ESTAB
2) ROOF POLE WITHOUT THREE WAY JOINT FOR TEFS()
CQA(GS)/US/467(b)
C
ESTAB
3) WELDING JOBS()
AS PER REQUIREMENT
C
NOT ESTAB
Category : P
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) AMMUNITION CONTAINER (BOX) H 2 A/L STEEL, DES. REF. CIA/AMMN/468,PT. NO. ISV 296-A SPECN. IA 1169()
IA 1169
C
Not Estab.
2) ALL TYPES OF AMMUNITION CONTAINERS/ STEEL BOXES AS PER AFK/ AHSP SPECN.()
AFK/ AHSP SPECN.
C
Not Estab.
Category : P
1) Small Arms Factory
Name
Specification
Use
Status
1) BODY (IC) FOR REVOLVER MK-III()
DRG. No. SK-5375R*3D
C
Not Estab.
Category : P
1) Ordnance Factory Dumdum
Name
Specification
Use
Status
1) STEEL CONTAINER FOR PACKING OF TU 1111()
DRG NO. ARM 1519
C
NOT ESTAB.
2) STEEL BOX TO HOLD TU TB-250()
DRG NO. ARDE 1501-05
C
NOT ESTAB.
Category : P
470
Global Seamless Tubes & Pipes Pvt. Ltd.
AAHCG7873M
Download
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) SEAMLESS TUBE FOR BARREL OF TEAR GAS GUN[01]()
Specification : SEAMLESS TUBE WITH O.D. 50MM & I.D. 38MM X LENGTH 310(+/-1)MM TO MAT. SPECIFICATION : BS 970 PT-1:1983 , GD. 070 M-55,"T" CONDITION (EN-9) OR BS 970 PT-1:1983,GD. 080 M-40 (EN-8)HARDENED & TEMPERED TO 240-255 BHN FOR INPUT BARREL OF TGG
R
Nonestab
Category :
471
ENLARK ENTERPRISES PRIVATE LIMITED
AAFCE6855R
Download
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) RHE SHELL ASSEMBLY M AS PER ARDE DRG NO 1905 02 01 01 01 00 000DA
Description : RHE SHELL ASSEMBLY M AS PER ARDE DRG NO 1905 02 01 01 01 00 000DA()
Specification : RHE SHELL ASSEMBLY M AS PER ARDE DRG NO 1905 02 01 01 01 00 000DA
C
Estab
2) A SET OF COMPONENTS FOR DPCIM WARHEAD STRUCTURE CONSISTING OF 15 ITEMS AS PER ANNEXURE A DATED 03082020
Description : A SET OF COMPONENTS FOR DPCIM WARHEAD STRUCTURE CONSISTING OF 15 ITEMS AS PER ANNEXURE A DATED 03082020()
Specification : As per DRG & QAP
C
Estab
3) OGIVE ASSEMBLY FOR DPCIM WARHEAD AS PER ARDE DRAWING NO 86030304010400000DB
Description : OGIVE ASSEMBLY FOR DPCIM WARHEAD AS PER ARDE DRAWING NO 86030304010400000DB()
Specification : as per QAP
C
Estab
Category : p
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) RHE SHELL ASSEMBLY G AS PER ARDE DRAWING NO1702 03 01 01 00 000 00DA
Description : RHE SHELL ASSEMBLY G AS PER ARDE DRAWING NO1702 03 01 01 00 000 00DA()
Specification : RHE SHELL ASSEMBLY (G) AS PER ARDE DRAWING NO.1702 03 01 01 00 000 00DA Item Code 6732020801
C
Estab
Category : p
472
Gandhar Oil Refinery India Ltd
MUMGO8489F
Download
1) High Explosive Factory
Name
Specification
Use
Status
1) MINERAL JELLY[10]()
Specification : JSS 8030-09:2016 REV NO.3 (D.S CAT NO. 8030-000032) DC 3744-ME DATED 17.09.2002
R
Estab
2) PARAFFIN LIQUID[10]()
Specification : AMMUNITION TO SPECN JSS-9160-05-2016 (REV NO.3) DC 5475 -ME DT. 24.09.2016
R
Estab
Category : p
473
RS TRADING CORPORATION
APYPB2509Q
Download
1) Opto Electronic Factory
Name
Specification
Use
Status
1) SINGLE ROW BALL BEARING 6X19X6 LF NO 2051100004[20]()
Specification : SINGLE ROW BALL BEARING 6X19X6 LF NO 2051100004
C
Nonestab
2) SINGLE ROW BALL BEARING 10X26X8MM LF NO 2051100101[20]()
Specification : SINGLE ROW BALL BEARING 10X26X8MM LF NO 2051100101
C
Nonestab
3) BALL BEARING S R 17X30X7 MM LF NO 2051190103[20]()
Specification : BALL BEARING S/R 17X30X7 MM LF NO 2051190103
C
Nonestab
4) BALL BEARING S R 10X22X6MM LF NO 9927081746[99]()
Specification : BALL BEARING S R 10X22X6MM LF NO 9927081746
C
Nonestab
5) BALL BEARING S R 3X7X2 POINT 5MM LF NO 9927081741[99]()
Specification : BALL BEARING S/R 3X7X2.5MM, L.F.NO.9927081741
C
Nonestab
6) BALL BEARING S R 3X8X3MM LF NO 9927081791[99]()
Specification : BALL BEARINGS S/R 3X8X3MM LF NO 9927081791
C
Nonestab
7) S R BALL BEARING SIZE 50X65X7 LF NO 2051130005[20]()
Specification : S/R BALL BEARINGS SIZE 50X65X7 , L.F.NO.2051130005
C
Nonestab
8) BALL BEARINGS S R 17X35X8MM LF NO 2051190104[20]()
Specification : BALL BEARING S/R 17X35X8MM L.F.NO.2051190104
C
Nonestab
9) BALL BEARING SR SIZE 30X47X9 LF NO 9927081750[99]()
Specification : BALL BEARINGS S/R SIZE 30X47X9 , L.F.NO.9927081750
C
Nonestab
10) BALL BEARING SR 6X15X5 MM LF NO 9927081744[99]()
Specification : BALL BEARING S/R 6X15X5MM, L.F.NO.9927081744
C
Nonestab
11) BEARING 5 1006 LF NO 7440201326[74]()
Specification : BEARING 5-1006, L.F.NO.7440201326
C
Nonestab
12) BALL BEARING 5 10058 75 AS PAR LF NO 2051100033[20]()
Specification : BALL BEARING G-10058-75 AS PAR LF NO 2051100033
C
Nonestab
13) D ROW BALL BEARING SIZE 6X19X6MM LF NO 2051110004[20]()
Specification : D ROW BALL BEARING SIZE 6X19X6MM LF NO 2051110004
C
Nonestab
14) SILICA GEL BLUE DRYING AGENT LF NO 9927063976[99]()
Specification : SILICA GEL BLUE DRYING AGENT LF NO 9927063976
C
Nonestab
Category :
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 7110308061 BEARING TO DESGN JM822049 JM822010 MAKE KOYO FOR PROJECT DHANUSH[71]()
Specification : BEARING TO DESGN: JM822049 / JM822010 MAKE KOYO FOR PROJECT DHANUSH.
C
Nonestab
Category :
474
ADITYA ENGINEERING INDUSTRIES
JLDT00449B
Download
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6338501100 LINER FOR RIGID CUTTING CHARGE 85 MM[63]()
Specification : LINER FOR CUTTING CHARGE 85 MM TO DRG NO. HE/CAST/043 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
Category :
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]()
Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
Category :
475
MERLINHAWK AEROSPACE PVT. LTD.
BLRM04940F
Download
1) Opto Electronic Factory
Name
Specification
Use
Status
1) CONTROL UNIT()
-
C
Estab.
2) AUTOMATIC CONTROL UNIT()
-
C
Estab.
3) BV-29()
-
C
Estab.
4) BG-29()
-
C
Estab.
5) CABLE TESTER()
-
C
Estab.
Category : DDP
1) Opto Electronic Factory
Name
Specification
Use
Status
1) ELECTROBLOCK TO DRAWING NO. BL2.300.041 SB (7440205909)[74]()
Specification : AS PER SPECIFICATION NO. OLF/SPEC/T-90/EBU FOR PNK-4S
P
Estab
Category : p
1) Opto Electronic Factory
Name
Specification
Use
Status
1) PCB CONTROL MODULE OF SSG (LF NO. 7441121235)[74]()
Specification : PCB CONTROL MODULE OF SMALL SIZE GYRO AS PER DRG. NO. 7194.03.01.000
C
Estab
2) PCB ADJUSTMENT BOARD (LF no. 7441121239)[74]()
Specification : PCB ADJUSTMENT BOARD AS PER DRG. NO. 7064.03.01.600
C
Estab
3) PCB ADAPTER (LF No. 7441121237)[74]()
Specification : PCB ADAPTER AS PER DRG. NO. 7064.03.03.000
C
Estab
4) PCB PHASE SENSITIVE RECTIFIER (LF no. 7441121238)[74]()
Specification : PCB PHASE SENSITIVE RECTIFIER AS PER DRG. NO. 7084.32.02.400-01
C
Estab
5) HORIZONTAL GIDANCE POWERSUPPLY (LF no. 7441122037)[74]()
Specification : HORIZONTAL GIDANCE POWER SUPPLY AS PER SPECN. NO. 7084.32.06.100
C
Estab
6) PCB CONTROL MODULE (LF NO. 7441121236)[74]()
Specification : PCB CONTROL MODULE AS PER DRG. NO. 7084.32.03.100
C
Estab
Category : p
476
H K ENTERPRISES
KNPH01228D
Download
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) WOODEN PACKING CASES FOR FLOAT()
IMPD-0962
E
ESTAB
2) WOODEN CRATES()
IS:3071-1981
E
ESTAB
3) WOODEN PACKING CASES /BOXES/WOODEN PALLET()
AS PER SPECIFICATION
E
ESTAB
4) NON CONIFEROUS PLANKS & SCANTLING Gd.I&II()
AS PER SPECIFICATION
R
ESTAB
5) CONIFEROUS PLANKS & SCANTLING Gd.I&II()
AS PER SPECIFICATION
R
ESTAB
6) WOODEN FURNITURE & ALLIED STORE()
AS PER SPECIFICATION
E
ESTAB
7) RAW WOODEN (DEODAR)FOR BOAT PRASANT-465MK-1()
AS PER SPECIFICATION
R
ESTAB
8) MARINE WOODEN KEEL IN FLAT FOR BOAT()
AS PER DRG.NO.OPF/DO/ME,285,286,287
C
ESTAB
9) PIN TENT ANGLE IRON MEDIUM MK-2()
CQA(GS)/US/428
C
ESTAB
10) U-PIN FOR TEFS()
CQA(GS)/US/467(b)
C
ESTAB
11) IRON PIN()
AS PER SPECIFICATION
C
ESTAB
12) TENT DEES 350 mm * 230mm * 6.3mm()
CQA(GS)/US/426(a)
C
ESTAB
13) TENT DEES 38mm * 32mm *4mm GALVANIZED()
CQA(GS)/US/426(a)
C
ESTAB
14) CLIP IRON()
CQA(GS)/US/467(b)
C
ESTAB
15) HEX BOLT WITH LOOP()
IS:1363 & CQA/(GS)/US/467(b)
C
ESTAB
16) HEX BOLT M6*45mm WITH LOOP()
IS:1363 & CQA/(GS)/US/467(b)
C
ESTAB
17) WING NUT WITH BRACKET()
IS:2632,280 & CQA(GS)/US/467(b)
C
ESTAB
18) TENT RING I.G.12.5MM()
IS:1359-1977 & IND/GS/335(b)
C
ESTAB
19) HAMMER SLEDGE DOUBLE FACED 2KG (FITTED WITH HANDLE)()
CQA(GS)/SS337(b)&CQA(GS)/US/461
C
ESTAB
20) HOOK IRON()
CQA/(GS)/US/467(b)
C
ESTAB
21) TRANSOM OR OBM(SUB ASSY)()
AS PER DRG.NO.OPF/DO/ME/288
C
ESTAB
22) POLYGON HOLLOW SECTION()
AS PER DRG.NO.OPF/DO/ME/263
C
ESTAB
23) ALL TYPE OF WOODEN ITEMS & WOODEN PATTERN FOR SOCKS()
AS PER SPECIFICATION
C
ESTAB
Category : S
1) Small Arms Factory
Name
Specification
Use
Status
1) CHEST FOR CARBINE, RIFLE & DP WEAPONS[22]()
Specification : AS PER SPECIFICATION
E
Estab
2) WOODEN PACKING BOXES[22]()
Specification : AS PER SPECIFICATION
E
Estab
3) TIMBER PLANKS & FITTINGS OF CHEST[22]()
Specification : AS PER SPECIFICATION
R
Estab
Category : P
1) Small Arms Factory
Name
Specification
Use
Status
1) WOODEN CHEST MG2B FOR MAG
Description : WOODEN CHEST MG2B FOR MAG()
Specification : DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001
E
Estab
Category : p
1) Small Arms Factory
Name
Specification
Use
Status
1) WOODEN FITTING FOR LMG 5.56 MM
Description : WOODEN FITTING FOR LMG 5.56 MM()
Specification : AS PER DRAWING
C
Estab
2) CHEST FOR 9 MM CARBINE
Description : CHEST FOR 9 MM CARBINE()
Specification : AS PER DRAWING DS CAT NO 1005-00966 DC (I) NO 25859 SA DT 10.09.03
C
Estab
3) TIMBER SOFTWOOD CONIFEROUS PLANKS , BATTENS , SCANTLINGS OF ALL GRADES
Description : TIMBER SOFTWOOD CONIFEROUS PLANKS , BATTENS , SCANTLINGS OF ALL GRADES()
Specification : IS:190-1991 , IS:5247 pt-I&II
C
Estab
4) WOODEN CHEST MG2B FOR MAG
Description : WOODEN CHEST MG2B FOR MAG()
Specification : DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001
C
Estab
Category : p
1) Small Arms Factory
Name
Specification
Use
Status
1) WOODEN FITTING FOR LMG 5.56 MM
Description : WOODEN FITTING FOR LMG 5.56 MM()
Specification : AS PER DRAWING
C
Estab
2) CHEST FOR 9 MM CARBINE
Description : CHEST FOR 9 MM CARBINE()
Specification : AS PER DRAWING DS CAT NO 1005-00966 DC (I) NO 25859 SA DT 10.09.03
C
Estab
3) TIMBER SOFTWOOD CONIFEROUS PLANKS , BATTENS , SCANTLINGS OF ALL GRADES
Description : TIMBER SOFTWOOD CONIFEROUS PLANKS , BATTENS , SCANTLINGS OF ALL GRADES()
Specification : IS:190-1991 , IS:5247 pt-I&II
C
Estab
4) WOODEN CHEST MG2B FOR MAG
Description : WOODEN CHEST MG2B FOR MAG()
Specification : DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001
C
Estab
Category : p
477
BHAGYASHRI HOME APPLIANCES PVT LTD
NGPB02141G
Download
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6338501100 LINER FOR RIGID CUTTING CHARGE 85 MM[63]()
Specification : LINER FOR CUTTING CHARGE 85 MM TO DRG NO. HE/CAST/043 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
2) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]()
Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
Category :
478
SANATHAN ALLIED INDUSTRIES
AGLPR5151Q
Download
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) TUBELESS TYRE WITH RUNFLAT SYSTEM & WHEEL RIM FOR MPV[90]()
Specification : TUBELESS TYRE WITH RUNFLAT SYSTEM & WHEEL RIM AS PER SPECIFICATION NO. VFJ/SP/TSS/RFS/01/MPV (ARMY & MHA)/ AMENDMENT NO. 10 DATED 10-07-2015
C
Nonestab
Category :
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) TUBELESS TYRE WITH RUNFLAT SYSTEM & WHEEL RIM FOR MPV[90]()
Specification : TUBELESS TYRE WITH RUNFLAT SYSTEM & WHEEL RIM AS PER SPECIFICATION NO. VFJ/SP/TSS/RFS/01/MPV (ARMY & MHA)/ AMENDMENT NO. 10 DATED 10-07-2015
C
Nonestab
Category :
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Run Flat System for Bullet Proofing of SML LF no 9413100008000[90]()
Specification : Specification No. VFJ/TSS /SML 4WD 3365 RUN FLAT DtD. 28/11/2019.
C
Nonestab
Category :
479
UNOMAC
AABFU1549B
Download
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) DESIGN DEVELOPMENT MANUFACTURING SUPPLY AND PROVING OF ASSEMBLY STAND FOR MODIFIED ELEVATING GEAR BOX ASSEMBLY TO DRG NO DW 1070 1000 10
Description : DESIGN DEVELOPMENT MANUFACTURING SUPPLY AND PROVING OF ASSEMBLY STAND FOR MODIFIED ELEVATING GEAR BOX ASSEMBLY TO DRG NO DW 1070 1000 10()
Specification : AS PER DRG NO DW 1070 1000 10
R
Estab
2) ASSEMBLY STAND FOR WHEEL CARRIAGE ASSEMBLY DHANUSH 155 MM AS PER MPF SKETCH NO DHANUSH WC ASSY STAND 01 LF NO 7110306062
Description : ASSEMBLY STAND FOR WHEEL CARRIAGE ASSEMBLY DHANUSH 155 MM AS PER MPF SKETCH NO DHANUSH WC ASSY STAND 01 LF NO 7110306062()
Specification : AS PER MPF SKETCH NO DHANUSH WC ASSY STAND 01 LF NO 7110306062
R
Estab
Category : p
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 7119033641 BODY[71]()
Specification : BODY TO DER NO 175-47-014-A
C
Nonestab
Category :
480
M.S.Textiles as the Selling Agent of M/s.R.S.R.Mohota Spg. & Wvg. Mills Ltd,
NGPR00069G
Download
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) Cloth Cotton Poplin Light Blue 150cms.()
IS:188-2004
R
Non Established
2) Cloth Plain Weave Polyester-Viscose Dope Dyed Khaki 138cms.()
IND/TC/0048(c)
R
not established
3) Cloth Plain Weave Polyester-Cotton Deep Brown 150cms()
AIRHQ/JDQAS/PROV/MG-082
R
not established
4) Cloth Shirting Blended Polyester-Viscose (67:33)Light Blue 148cms()
AIRHQ/DQAS/AC-077
R
not established
5) Cloth Plain Weave Polyester-Cotton Khaki 138cms()
IND/TC/0042(f)
R
not established
6) Cloth Plain Weave Polyester-Viscose Dope Dyed Light Grey 148cms.()
AIRHQ/DQAS/AC-030
R
not established
7) Cloth Drill Cotton Mineral Khaki 142cms()
IS:177
R
not established
8) Cloth Drill Cotton Greenish Khaki 142Cms()
IS:177
R
not established
9) Cloth Drill Cotton White Bleached 91cms.()
IS:177
R
Established
10) Cloth Plain Weave Polyester-Viscose Dope Dyed Khaki 138cms (DQAS)()
IND/TC/0048(c) LCH Value
R
Non Established
11) Cloth Drill Cotton Dark Grey 142cms.()
IS:177
R
Established
12) Cloth Cotton Light Blue 142cms.()
IS:2970 Type-II
R
Non Established
13) Cloth Mercerised Cotton Light OG 142 cms minimum width (excluding selvedges)()
PROV/OCFAV/FABRIC/004
R
Established
Category : S
