Specification : SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET
C
Nonestab
6) LPTA Stud Front[90]()
Specification : STUD FRONT 2154 7061 8801N NOTE:- TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION
C
Nonestab
7) LPTA U Bolt with Nut[90]()
Specification : U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH
C
Nonestab
8) LPTA Vehicle Identification plate[90]()
Specification : VEHICLE IDENTIFICATION PLATE FOR LPTA 715TC/32 BS-III VEHICLE
Specification : SPRING (SHACKLE) PIN DRG.NO.352.325.0530
C
Nonestab
11) LPTA SPRING PIN[90]()
Specification : SPRING PIN DRG.NO.352.322.0530
C
Nonestab
12) LPTA GUIDE PLATE FRONT[90]()
Specification : GUIDE PLATE CAST FRONT IPL-BS -III-LPTA-715 IPL SL.NO.03 OF SPRNG & SUSPENSION ITEM 042-322-0024Jb(FRONT SPRING U BOLT)
C
Nonestab
13) LPTA Assy Water Tank Insulated 55 lt[90]()
Specification : ASSY WATER TANK (INSULATED 55 LTRS. LPTA713TC/32 DRG NO. VFJ/16/09/000045(V4)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 7110306071 SEMI FINISH CASTING FOR HUB TO DRAWING NO 998 SEMIFINISH 3497 TO BE MANUFACTURED FROM HUB CASTING TO DRAWING NO P 155 HRG 1002 2[71]()
Specification : SEMI FINISH CASTING FOR HUB TO DRAWING NO 998 SEMIFINISH 3497 TO BE MANUFACTURED FROM HUB CASTING TO DRAWING NO P 155 HRG 1002 2
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 7119033641 BODY[71]()
Specification : BODY TO DER NO 175-47-014-A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 7110302035 FORGING FOR PIN TO DRG NO P155 HRG 3012 3 FOR PROJECT DHANUSH[71]()
Specification : FORGING FOR PIN TO DRG. NO: P155-HRG-3012-3 FOR PROJECT DHANUSH.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 7110302034 FORGING FOR PLANETARY PINION TO DRG NO P155 HRG 3002 3 FOR PROJECT DHANUSH[71]()
Specification : FORGING FOR PLANETARY PINION TO DRG. NO: P155-HRG-3002-3 FOR PROJECT DHANUSH.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) ROLLING RING GENERAL ARRANGEMENT FOR 450 KG L F NO 6241100118[62]()
Specification : (1)RING WELDING ASSY(TWO QUADRANT) AS PER DRAWING NO.ARDE-2122-18 SHTS 6 SHTS. NO.1,QTY-04 NOS. (2)COVER PLATE AS PER DRAWING NO.ARDE 2122-19,QTY-01 NOS. (3)CLAMPING PLATE AS PER DRAWING NO.ARDE-2122-20,QTY-01 NOS. (4)SPRING WASHER M 16 T
C
Nonestab
2) ROLLING RING ASSY FOR 250 KG L F NO 6241100117[62]()
Specification : (1)RING WELDING ASSY AS PER DRAWING ARDE-9501-01-19 SHTS 3HT. NO.1,QTY.-04 NOS (2)CLAMPING PLATE AS PER DRAWING NO. ARDE 9501-01-20 ,QTY.-02 NOS. (3)HEX HEAD SCREW M8X1.25P-35LONG,4.8-IS:1363(PART-2):2000,MAKE:UNBRAKO/ TVS/LPS QTY-08 N
1) Adaptor Boat Tail as per Drg No 2440A10002[65]()
Specification : Adaptor.Boat Tail as per Drg. No. 2440A10002
C
Nonestab
Category : P
Grade : III
Size :
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) FORGING FOR COVER()
DRG NO-172-45-105-2/F
E
NOT ESTAE
2) FINISHED HOUSING INCLUDING PRESSURE TESTING()
DRG,175.47.01
E
NOT ESTAE
3) SELF-CENTRING RING NUT FOR()
NO-3690010
E
NOT ESTAE
4) FORGING FOR CPUPLING()
DRG NO.FG-765-15-17-3
E
NOT ESTAE
5) BEARING RING(FORGTING)()
DRG NO.172-45
E
NOT ESTAE
6) INTERMEDIATE GEAR(FORGING DRG)()
DRG NO.175-45-005/F
E
NOT ESTAE
7) FORG FOR BODY()
175-47-027F
E
NOT ESTAE
8) GEAR(FORGING DRG)()
DRG NO.175-45-000/F
E
NOT ESTAE
9) GEAR(FORGING DRG)()
DRG NO.175-45-008/F
E
NOT ESTAE
10) COVER(FORGING)()
DRG NO.175-45-051/F & DRG NO 172-45-0
E
ESTAE
11) CARRIER(FORGING)()
DRG NO.172-47-102-3/F
E
ESTAE
Category : P
Grade : I
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) 105 MM MEDIUM RANGE CHAFF ROCKET (MRCR) (EMPTY) TO DRG. NO. NASK 762 SHEET 1 OF 2 SHTS DRG. NO. NASK 762 SHEET 1 OF 2 SHTS()
DRG. NO. NASK 762 SHEET 1 OF 2 SHTS
C
Not Estab.
Category : P
Grade : III
Size :
S
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) ADAPTOR FORGINGS FOR 155 MM ERFB[02]()
Specification : AS PER HAPP DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Grey Iron Foundry
Name
Specification
Use
Status
1) FORGED HEAD (UN-MACHINED) FOR 100-120 KG. AERIAL BOMB AS PER GIF DRAWING NO. 5310-A/FORGE AND TERMS & CONDITIONS ENCLOSED[66]()
Specification : FORGED HEAD (UN-MACHINED) FOR 100-120 KG. AERIAL BOMB
AS PER GIF DRAWING NO. 5310-A/FORGE
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FILLING PLUG MACHINED LF NO 6250700174[62]()
Specification : FILLING PLUG (MACHINED). AS PER DRAWING ARM 1172B5 (R.NO. 4, DATED 25/04/89)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) LUG SUSPENSION NO 318 Item code 6250700175[62]()
Specification : LUG SUSPENSION NO. 318 (MACHINED) AS PER DRAWING NUMBER ARM 1302C5 (R.NO.4, DATED 09/02/2023)
C
Nonestab
2) LUG SUSPENSION NO 243 AND THRUSTER PLATE MACHINED L F NO 6250700173[62]()
Specification : LUG SUSPENSION NO. 243 AND THRUSTER PLATE (MACHINED). AS PER DRAWING NUMBER ARM 1461D. (R. NO. 2, DATED 05/10/01)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) MACHINING JOB WORK OF LUG 243 ITEM CODE 9449580030[94]()
Specification : AS PER ANNEXURE -A
C
Nonestab
2) MACHINING JOB WORK OF LUG 318 ITEM CODE 9449580029[94]()
Specification : AS PER ANNEXURE-A
C
Nonestab
3) MACHINING JOB WORK OF FILLING PLUG ITEM CODE 9449580031[94]()
Specification : AS PER ANNEXURE A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521[70]()
Specification : FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Gun and Shell Factory
[Deemed Registration]
Name
Specification
Use
Status
1) STEEL FORGING FOR CASE OUTER DRG NO 3015202 MSF SK NO F 1171
Description : STEEL FORGING FOR CASE OUTER DRG NO 3015202 MSF SK NO F 1171()
Specification : AS PER DRAWING
R
Nonestab
Category : p
Grade : 3
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) RH DRUM TO 3901040034[39]()
Specification : GOST 4543-71
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) SPOCKET to 3906211068[39]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) COUPLING TOOTHED to 3906406229[39]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) GEAR DELIVERY PUMP TO 3906401049[39]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) FLANGE TO LF 3906305911[39]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) PLANET PINION Z 15 to 3901040045[39]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) PLANET PINION Z 18 to 3901040046[39]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) FLANGE[04]()
Specification : STEEL 30XCA GOST 4543-71
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) SET OF FORGING REQUIRED FOR RACE RING CONSISTS OF : (A) FORGING OF LOWER RING TO DRG. NO. AK-630 119-1 (B) FORGING OF UPPER RING TO DRG. NO. AK-630 119-2, (C) FORGING OF INTERNAL RING TO DRG. NO. AK-630 119-25. MAT. SPECIFICATION : GRADE X 2CR13 TO[72]()
Specification : AS PER DRG. & SPECIFICATION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Katni
[ENR Registration]
Name
Specification
Use
Status
1) CAST IRON MOULD 254 X 840 MM LONG
Description : CAST IRON MOULD 254 X 840 MM LONG()
Specification : CAST IRON MOULD TO SIZE 254 MM DIA X 840 MM LONG AS PER DRG.NO.12M-543 DT. 21/11/06 WITH AMMENDMENT NO.3116 DATED 11/10/2008 IN MACHINE FINISHED CONDITION. MALE & FEMALE PARTS ARE TO BE TIED TOGETHER & PUNCHED WITH SAME SL. NO. FOR PROPE
Specification : Steel Forging Cylinder Gas SKM 306*5 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF ROUGH MACHINED CARRIER FORGING AS PER DRG NO 765 15 156 10 AS PER SCOPE OF WORK NO SCOPE OF WORK MA 12 1208 22 DATED 08 06 2017[80]()
Specification : MANUFACTURING AND SUPPLY OF ROUGH MACHINED CARRIER FORGING AS PER DRG NO 765 15 156 10 AS PER SCOPE OF WORK NO SCOPE OF WORK MA 12 1208 22 DATED 08 06 2017
E
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) NUT TO DRG NO 613 44 071 L F NO 6230901106[62]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
2) WASHER TO DRG NO 219 35 186 L F NO 6120100106[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
Category : ddp
Grade : Grade III
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) RING NUT 1000 LBS (6220900900)[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE
TREATMENT. [DRG. ENCLOSED].
C
Estab
2) FILLING PLUG ( 450 KG)(6230400504)[62]()
Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10.
[DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Estab
3) RING NUT 450 KG (6230900904)[60]()
Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9.
DRG. ENCLOSED.
C
Estab
4) FILLING PLUG ( 250 KG) (6240000504)[62]()
Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.
ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Estab
5) O RING I D 38 0 MM 250KG 6241101204[62]()
Specification : "O" RING I.D. 38.0 MM ,DIA WITH DIA 3.5 MM AS THICK TO SPECN
IND/ME/884(PROV)C3 FOR 250 KG HSLD BOMB.
C
Estab
6) HEX SOCKET SET SCREW 450 KG 6230001304[62]()
Specification : HEX SOCKET SET SCREW M5 X 10 (IS-6094-2006-PT-4,CP).
C
Estab
7) Washer for 1000lbs (6220901111)[62]()
Specification : WASHER TO DRG. NO. ARM 1172 A 17 MATERIAL NEOPRENE RUBBER TO
IND/ME/884 [PROV] C3. [DRG. ENCLOSED FOR DIMENSIONS ONLY
C
Estab
8) Nose Plug 1000LBS(6220901044)[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE
TREATED]. [DRG. ENCLOSED.
10) Protecting Ring Assly 1000LBS (6220900610)[62]()
Specification : PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING AS PER DRG.
NO. ARM-1460 D CONSISTING OF:-PROTECTING RIM - 4 [HALVES],
CLAMPING PLATE 2 NOS, CAP 2 NOS, BOLT NUT AND SPRING WASHER
8 NOS. EACH. [DRG. ENCLOSED]. { NOTE:- TO COVER UP
C
Estab
11) Nose Plug 250KG (6240900504)[62]()
Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED).
DRG. ENCLOSED
C
Estab
12) HEX SOCKET SET SCREW BT 450 KG 1727041225[17]()
Specification : HEX SOCKET SET SCREW M 12 X 1.75 PITCH X 25- [(IS:- 6094-Pt-4:2006-CP)
C
Estab
13) ROLLING RING ASSEMBLY 450KG (6231100104)[62]()
Specification : ROLLING RING ASSEMBLY FOR 450 Kg HSLD BOMB AS PER Drg.No.-
ARDE-2122 DET.17 (WITHOUT PHOSPHATED) Drg.ENCLOSED,
C
Estab
14) SOCKET SET SCREW FOR BASE TRANSIT 1751020207[17]()
Specification : SOCKET SET SCREW FOR BASE TRANSIT ARM 1172 A - 32. ] [[DRG. ENCLOSED].
C
Estab
15) NOSE PLUG 450KG (6230900504)[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7
[DRG. ENCLOSED]. [W/O SURFACE TREATED.
Specification : PLUG [SURFACE TREATED] AS PER DRG. NO. ARDE 2122
DET 14. [DRG. ENCLOSED].
C
Estab
19) TA BOLT M-20 (6120100107)[61]()
Specification : TA BOLT M20 X 1.5 TO DRG NO.OFM-32840
DRG.ENCLOSED.
C
Estab
20) TA BOLT M-27 (6120100108)[61]()
Specification : TA BOLT M27 X 1.5-6G TO DRG.NO.OFM-32841
[DRG.ENCLOSED.
C
Estab
21) CONTAINER EXPLODER 450 KG (6230701104)[62]()
Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG.
NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED]
C
Estab
22) LUG HOUSING 250 KG (6240100114)[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2
WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Estab
23) LUG HOUSING HOLDER 250 KG (6240100124)[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2
WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Estab
24) BASE TRANSIT FOR 1000LBS (6220901004)[62]()
Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20
C
Estab
25) BASE TRANSIT (250KG) (6240900104)[62]()
Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.
ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB
C
Estab
26) NEOPRENE RUBBER WASHER 450 KG (6231401501)[62]()
Specification : WASHER NEOPRENE RUBBER SPECN. IND/ME/884 [PROV] C3 TO DRG.
NO. ARDE 2122 DET 15. [DRG. ENCLOSED FOR DIMENSION ONLY
C
Estab
27) RING NUT 250 KG (6240900904)[62]()
Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/
9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Estab
28) PLUG DUMMY 250 KG (6241101114)[62]()
Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5
SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED]
C
Estab
29) CONTAINER EXPLODER 250 KG (6244121304)[62]()
Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO.
ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB]
C
Estab
30) DETONATOR HOLDER 450 KG (6230901206)[62]()
Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED)
TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY.
C
Estab
31) WASHER FOR NOSE PLUG 1000LBS (6220901052)[62]()
Specification : WASHER FOR NOSE PLUG ARM-1049B.MATERIAL-NEOPRENE RUBBER TO
IND/ME/884 (PROV) C-50,DC NO.3751-ME DATED 12-12-2002,
OUTER DIA 101.60MM,INNER DIA 33.00MM AND THICKNESS 1.60MM.
C
Estab
32) PLUG FASTENING 250 KG (6241101124)[62]()
Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01
DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED]
C
Estab
33) WASHER (RUBBER) 250KG (6240901300)[65]()
Specification : WASHER AS PER DRG. NO. ARDE 9501 -01 DET 12 TO SPECN. NEO-
PRENE RUBBER TO IND/ME/884 [PROV] C3. [DRG. ENCLOSED.
FOR 250 KG HSLD BOMB.
C
Estab
34) DETONATOR HOLDER 1000 LBS (6220900700)[62]()
Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE
TREATMENT) [DRG. ENCLOSED]
C
Estab
35) LUG HOUSING ASSEMBLY 450 KG ASSY M-C (6230100104)[62]()
1) CONVERSION OF BOLT BREECH FROM FORGING TO DRG.NO.29P 0013* (M) required for 0.315 Sporting Rifle[00]()
Specification : AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FORGING TO DRG NO OFM 32851 REQUIRED FOR TA LINK TO DRG NO OFM 32844[70]()
Specification : As per Drawing and specification
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BLOCK GAS FORGING TO DRG. NO.RFI SK 2132-E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL (ICR-1322)[70]()
Specification : AS PER DRG. NO.RFI SK 2132-E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL (ICR-1322)
C
Nonestab
2) HAMMER FORGINGS TO DRG. M6-0001E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL) (ICR 1256) (FULLY FINISHED CONDITION) (5000 NOS = 2500 SETS)[70]()
Specification : AS PER DRG. M6-0001E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL) (ICR 1256) (FULLY FINISHED CONDITION) (5000 NOS = 2500 SETS)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INPUT MATERIAL: BODY FORGING CONVERSION OF BODY TO D.S.CAT. NO. 1005-001514(ICR-1325)(I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I,(II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II,FROM FORGING TO DRG. NO. RFI/SK/725/IL[00]()
Specification : AS PERD.S.CAT. NO. 1005-001514(ICR-1325)(I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I,(II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II,FROM FORGING TO DRG. NO. RFI/SK/725/IL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION OF BOLT BREECH FROM FORGING TO TEND DRG.NO 2369 required for 0.315" Sporting Rifle[00]()
Specification : AS PER TEND DRG.NO 2369 required for 0.315" Sporting Rifle
C
Nonestab
2) BOLT BREECH FORGING TO DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO DS CAT NO 1005 001514 ICR 1325[70]()
Specification : INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO DS CAT NO 1005 001514 ICR 1325
C
Nonestab
Category :
Grade : Grade III
Size :
S
265
VETRIVIGAAS AUTO TECH
B16A,SIDCO INDUSTRIAL ESTATE,HOSUR SIDCO INDUSTRIAL ESTATE HOSUR Tamil Nadu
PIN1 : 635109
Phone No. : 9443320879 GSTIN :
33AANFV3202G2ZE
Specification : AS PER DRG. No.29P 0004* required for 0.315" Sporting Rifle
C
Nonestab
2) SPRING LEAF BED BACK SIGHT TO DRG NO 29P 0008 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG. NO.29P 0008 required for 0.315" Sporting Rifle
C
Nonestab
3) SCREW SPRING BAND BACK SIGHT TO DRG NO 29P 0009 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.29P 0009 required for 0.315" Sporting Rifle
C
Nonestab
4) TRIGGER TO DRG NO 29P 0040STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110STR 2 WITH FIRMS MATERIAL[70]()
Specification : SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110STR 2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY AS PER DRG NO K 2050 ALT STR 2 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : UPPER HAND GUARD ASSY AS PER DRG NO K 2050 ALT STR 2 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INPUT BLANKS OF BLOCK GAS TO TEND 1966STAR WITH FIRMS MATERIAL FOR RIFLE 7POINT62 1A1 ICR 1322[70]()
Specification : AS PER TEND 1966* WITH FIRMS MATERIAL FOR RIFLE 7.62 1A1 (ICR- 1322)
C
Nonestab
2) MFG AND SUPPLY OF PIN RESTRICTING GAS REGULATOR TO DS CAT NO 5315 001756 DC NO 24275 SA DT 26 02 99 REQUIRED IN WHITE FINISHED CONDITION[70]()
Specification : AS PER DS CAT NO.5315-001756 DC NO. 24275-SA DT. 26/02/99 REQUIRED IN WHITE FINISHED CONDITION.
C
Nonestab
3) SUPPLY OF BLOCK EJECTOR ICR 1324 TO DS CAT N0 1005 001513 DC NO 26758 SA DATED 28 05 15 FULLY FINISHED CONDITION WITH FIRM MATERIAL LATEST ISSUE TO BE FOLLOWED[70]()
Specification : AS PER ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.
R
Nonestab
4) STUD COCKING HANDLE D S CAT No 5307 004445 D C No 24474 SA DATED 18 08 1999 FOR D C No LATEST ISSUE TO BE FOLLOWED ICR 1202[70]()
Specification : AS PER D.S.CAT.No.: 5307-004445, D.C.No.:24474-SA, DATED:18/08/1999 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED. (ICR-1202)
C
Nonestab
5) PIN RETAINING LOCKING CATCH TO D S CAT NO 5315 001773 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1221[70]()
Specification : AS PER D.S. CAT. NO.5315-001773 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1221)
C
Nonestab
6) KNOB LEVER LOCK TO D S CAT NO 1005 001656 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1318[70]()
Specification : AS PER D.S. CAT NO.1005-001656 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1318)
C
Nonestab
7) STUD LEVER LOCK TO D S CAT NO 1005 001659 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1321[70]()
Specification : AS PER D.S. CAT NO.1005-001659 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1321)
C
Nonestab
8) SCREW FRONT SLING LOOP TO D S CAT NO 5305 004999 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1206[70]()
Specification : AS PER D.S. CAT NO.5305-004999 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1206)
C
Nonestab
9) SCREW ZEROING BACK SIGHT TO D S CAT NO 5305 018164 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1229[70]()
Specification : AS PER D.S. CAT NO.5305-018164 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1229)
C
Nonestab
10) BUSH CYLINDER GAS TO D S CAT NO 3120 004656 ICR 1241 TO D C NO 23506 SA DATED 27 09 1996 FULLY FINISHED CONDITION WITH FIRMS MATERIAL[70]()
Specification : AS PER D.S. CAT. NO. 3120-004656 (ICR-1241)TO D.C. NO.23506-SA, DATED 27.09.1996 (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL)
C
Nonestab
11) SUPPLY OF STAY HAMMER TO DRG No TEND 2016 WITH FIRMS MATERIAL ICR1333[70]()
Specification : AS PER DRG. No. TEND 2016 WITH FIRM'S MATERIAL.(ICR-1333)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CLEANING ROD AS PER DRG No K 9001 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 9001 WITH FIRM'S MATERIAL
E
Nonestab
2) SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL[70]()
Specification : SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL
C
Nonestab
3) CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL[70]()
Specification : CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL
E
Nonestab
4) LOWER HAND GUARD BAND AS PER DRG NO K 1204 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 1204 WITH FIRMS MATERIAL
C
Nonestab
5) BULLET GUIDE AS PER DRG No TEND 2570 STR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : BULLET GUIDE AS PER DRG No TEND 2570 STR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
2) CONVERSION OF BOLT BREECH FROM FORGING TO DRGNO 29P 0013STAR M required for 0POINT0315 Sporting Rifle[00]()
Specification : AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle
C
Nonestab
3) BAND FORE SIGHT TO DRG NO 29 P 0002STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG. NO.29 P 0002* required for 0.315" Sporting Rifle
C
Nonestab
4) SUPPLY OF HOUSING HAMMER SPRING TO DS CAT NO 1005 001682 WITH DC NO 24979 SA DT 27 03 2001 IN FULLY FINISHED CONDITION ICR 1332[70]()
Specification : AS PER DS CAT NO.1005-001682 WITH DC NO.24979-SA DT.27.03.2001 IN FULLY FINISHED CONDITION (ICR-1332)
E
Nonestab
5) SUPPLY OF STAY HAMMER TO DRG No TEND 2016 WITH FIRMS MATERIAL ICR1333[70]()
Specification : AS PER DRG. No. TEND 2016 WITH FIRM'S MATERIAL.(ICR-1333)
C
Nonestab
6) SUPPLY OF EXTRACTOR TO D S CAT NO 1005 001571 D C NO 24891 SA DATED 05 12 2000 ICR 1262 FULLY FINISHED CONDITION WITH FIRM MATERIAL[70]()
Specification : AS PER D.S.CAT. NO.: 1005-001571, D.C.NO.: 24891-SA, DATED" 05/12/2000 (ICR - 1262)(FULLY FINISHED CONDITION WITH FIRM MATERIAL)
C
Nonestab
7) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
8) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL[70]()
Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL
R
Nonestab
9) MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) PULL THROUGH 5 point 56 MM 1A NYLON TO DS CAT NO 1005 557944 DC I NO 26532 SA DT 30 07 10[71]()
Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) SLING ASSEMBLY OF BLACK COLOUR[72]()
Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BUFFER BODY FOR PLATE BACK ASSY[70]()
Specification : BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15
Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15
C
Nonestab
3) Trigger guard[70]()
Specification : AS PER DRG. DS CAT No. 1005-00060
C
Nonestab
4) GUARD HAND UPPER ASSY FOR LMG 5 56 MM IN FINISHED CONDITION[70]()
Specification : GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA, DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDIT ION.
C
Nonestab
5) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB[70]()
Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
C
Nonestab
6) TRIGGER ASSEMBLY TO DS CAT NO 1005 006589[70]()
Specification : TRIGGER ASSEMBLY TO DS CAT NO 1005 006589 DC(1) NO 26375 SA DT 05/09/07 WITH DETAILS OF LATEST ISSUE INSPECTION TO BE GOVERN BY RELEVANT CLAUSES OF SPECN JSS-1005-04 2006 OF LATE ST ISSUE and ANY OTHER ACCEPTANCE CRITERIA TO BE PROVIDED BY
C
Nonestab
7) Spring Lock CQA I 393 23[70]()
Specification : SPRING LOCK AS PER DRG.NO.CQA (I)-393/23,CAT/PT.NO.-5340-014213 for devicd firing IB ()
C
Nonestab
8) Grip Handle Left and Right For FIRING DEVICE[70]()
Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125
C
Nonestab
9) MACHINING OF HOUSING MODIFIED FOR STRIKER MECHANISM[70]()
Specification : MACHINING OF HOUSING MODIFIED DRG.NO.NAD 7606/6 TO FINISHED HOUSING MODIFIED AS PER DRAWING.DIE CASTING HOUSING MODIFIED WILL BE ISSUED AGAINST BANK GAURANTEE FORM LF NO.0841271004
C
Nonestab
10) SLEEVE DRAWING FOR STRIKER MECHANISM[70]()
Specification : SLEEVE DRAWING NO. NAD- 7606/7 FOR STRIKER MECHANISM NO. 8 MK-1 IN FINISH CONDITION.
C
Estab
11) HAMMER FOR LMG IN FINISHED CONDITION[70]()
Specification : HAMMER DRG NO SK3143/71 (DS CAT NO.1005-008003) FOR LMG 5.56MM IN FINISHED CONDITION FORGING TO BE SUPPLIED BY SAF AGAINST L.F.0412079014. DC NO.26922-SA, DT.29.08.16.”
C
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT LEAF AS PER DRG NO K 2021STR WITH FIRMS MATERIAL[70]()
Specification : ASUPPLY OF REAR SIGHT LEAF AS PER DRG NO K 2021STR WITH FIRMS MATERIAL
C
Nonestab
2) BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR4[70]()
Specification : BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR4
C
Nonestab
3) BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR
Specification : INVESTMENT CASTING OF EAR. 6360693.
C
Nonestab
11) INVESTMENT CASTING OF PLATE 5189623[90]()
Specification : INVESTMENT CASTING OF PLATE.5189623
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG No 62C 1013 250 D3 SLEEVE HANDLE BASE BARREL FOR 12 7mm A D GUN A 1013[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN.
A 1013
"
C
Nonestab
2) INVESTMENT CASTING TO DRG No 62C 1012 250 E3 FOR FLASH HIDER[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1012 250 E3. FOR FLASH HIDER
"
C
Nonestab
3) INVESTMENT CASTING TO DRG No 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT
"
C
Nonestab
4) INVESTMENT CASTING TO DRG No 62C 2463 250 G3 FOR HOUSING EJECTOR[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 2463 250 G3.
FOR HOUSING EJECTOR."
C
Nonestab
5) INVESTMENT CASTING TO DRG No 64C 2026 250 G3 REQUIRED FOR HOLDER TO DRG No 2A42 02 026 C2026[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 2026 250 G3.
REQUIRED FOR HOLDER TO DRG.No.: 2A42.02.026 (C2026).
C
Nonestab
6) INVESTMENT CASTING TO DRG No 64C 5014 250 I3 REQUIRED FOR CARRIER TO DRG No 2A42 05 014 C5014[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 5014 250 I3. REQUIRED FOR CARRIER TO DRG.No. 2A42 05 014 (C5014)
C
Nonestab
7) INVESTMENT CASTING TO DRG No 64C 5021 250 I3 REQUIRED FOR PAWL TO DRG NO 2A42 05 024 C5024[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.024 (C5024).
C
Nonestab
8) INVESTMENT CASTING TO DRGNo 64C 5028 250 H3 REQD FOR CONNECTING LINK RIGID DRG No 2A42 05 028 C5028[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5028 250 H3. REQD FOR CONNECTING LINK RIGID (DRG.No. 2A42.05.028) (C5028)
C
Nonestab
9) INVESTMENT CASTING TO DRGNo 64C 5033 250 G3 REQUIRED FOR CONNECTING LINK RIGID DRG NO 2A42 05 033 C5033[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 5033 250 G3. REQUIRED FOR CONNECTING, LINK, RIGID.
(DRG.NO. 2A42 05 033) C5033.
C
Nonestab
10) INVESTMENT CASTING TO DRG NO 64C 5089 250 G3 REQD FOR CATCH BODY TO DRG NO 2A42 05 089 C5089[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG NO 64C 5089 250 G3.
REQD FOR: CATCH BODY TO DRG NO 2A42.05.089 (C5089)
C
Nonestab
11) INVESTMENT CASTING TO DRG No 64C 5111 250 K3 ALT REQUIRED FOR HANDLE TO DRG No 2A42 05 111 C5111[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5111 250 K3 ALT. REQUIRED FOR HANDLE TO DRG.No. 2A42 05 111 (C5111)
C
Nonestab
12) INVESTMENT CASTING TO DRG No 64C 5112 250 G3 REQUIRED FOR CONNECTING LINK RIGID DRG NO 2A42 05 112[42]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5112 250 G3. REQUIRED FOR CONNECTING LINK, RIGID (DRG.NO.2A42 05 112)
S
Nonestab
13) INVESTMENT CASTING TO DRG No 64C 2028 250 J3 REQUIRED FOR BRAKE TO DRG No 2A42 02 028 C2028[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 2028 250 J3.
REQUIRED FOR: BRAKE TO DRG.No.: 2A42.02.028 (C2028)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]()
Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle
1) PIPE TO 6106201031
Description : PIPE TO 6106201031()
Specification : 175.15.018SB-1
C
Estab
2) PLATE TO 6106211099
Description : PLATE TO 6106211099()
Specification : 172.28.057/PL
C
Estab
3) WRENCH FOR FAN CLUTCH NUT TO 6200600002
Description : WRENCH FOR FAN CLUTCH NUT TO 6200600002()
Specification : CQA(HV)5.95.000
C
Estab
4) TOMMY BAR 8 TO 6201000112
Description : TOMMY BAR 8 TO 6201000112()
Specification : 157012
C
Estab
5) FITTED SHAFT TO 6201000115
Description : FITTED SHAFT TO 6201000115()
Specification : 187.81.008
C
Estab
6) ELEVATING MECHANISM ASSY TO 6201015005
Description : ELEVATING MECHANISM ASSY TO 6201015005()
Specification : 188.15.005CBCB
C
Estab
7) BRACKET ASSY TO 6201015007
Description : BRACKET ASSY TO 6201015007()
Specification : 188.15.008CB-2CB
C
Estab
8) SEAT FRAME WITH INNER SHIELDINGS ASSY TO 6201015008
Description : SEAT FRAME WITH INNER SHIELDINGS ASSY TO 6201015008()
Specification : 188.15.015CBCB
C
Estab
9) BACK REST ASSY TO 6201015015
Description : BACK REST ASSY TO 6201015015()
Specification : 188.15.025CBCB
C
Estab
10) SLIP COVER UPPER TO 6201015017
Description : SLIP COVER UPPER TO 6201015017()
Specification : 188.15.031CBCB
C
Estab
11) COVER ASSY TO 6201015023
Description : COVER ASSY TO 6201015023()
Specification : 188.15.077CBCB
C
Estab
12) SLIP COVER ASSY TO 6201015024
Description : SLIP COVER ASSY TO 6201015024()
Specification : 188.15.078CBCB
C
Estab
13) GUARD ASSY TO 6201015027
Description : GUARD ASSY TO 6201015027()
Specification : 188.15.081CBCB
C
Estab
14) GUARD ASSY TO 6201015029
Description : GUARD ASSY TO 6201015029()
Specification : 188.15.086CBCB
C
Estab
15) STOP ASSY TO 6201015030
Description : STOP ASSY TO 6201015030()
Specification : 185.15.011CBCB
C
Estab
16) SEAT FRAME WITH INNER SHIELDINGS ASSY TO 6201015035
Description : SEAT FRAME WITH INNER SHIELDINGS ASSY TO 6201015035()
Specification : 179.15.041CBCB
C
Estab
17) WASHER LOCK TO 6201020020
Description : WASHER LOCK TO 6201020020()
Specification : 172.20.054
C
Estab
18) BOSS TO 6201029022
Description : BOSS TO 6201029022()
Specification : 155.29.2747
C
Estab
19) BRACE ASSY TO 6201034023
Description : BRACE ASSY TO 6201034023()
Specification : 184.34.004CBCB
C
Estab
20) SCREW ASSEMBLY DRAWING TO 6201081009
Description : SCREW ASSEMBLY DRAWING TO 6201081009()
Specification : 187.81.005SB-01
C
Estab
21) STOP ASSEMBLY DRAWING TO 6201081016
Description : STOP ASSEMBLY DRAWING TO 6201081016()
Specification : 184.81.041SBSB
C
Estab
22) BOSS TO 6201081075
Description : BOSS TO 6201081075()
Specification : 184.81.096
C
Estab
23) WRENCH SHEET 4 GOST 19903 74 30XGCA 3 a GOST 11269 76 to 6201081082
Description : WRENCH SHEET 4 GOST 19903 74 30XGCA 3 a GOST 11269 76 to 6201081082()
Specification : 188.81.056
C
Estab
24) ADAPTER TO 6201087031
Description : ADAPTER TO 6201087031()
Specification : 172.87.214
C
Estab
25) SOCKET WRENCH S27 ASSY TO 6201090002
Description : SOCKET WRENCH S27 ASSY TO 6201090002()
Specification : 172.90.008CBCB
C
Estab
26) WRENCH HANDLE ASSY to 6201090003
Description : WRENCH HANDLE ASSY to 6201090003()
Specification : 172.90.010CBCB
C
Estab
27) WRENCH FOR VACUUM AND PRESSURE RELIEF TO 6201090005
Description : WRENCH FOR VACUUM AND PRESSURE RELIEF TO 6201090005()
Specification : 172.90.029
C
Estab
28) LEVER ASSY TO 6201095016
Description : LEVER ASSY TO 6201095016()
Specification : 188.95.010CBCB
C
Estab
29) BACK REST TO 6201215018
Description : BACK REST TO 6201215018()
Specification : 188.15.076SB
C
Estab
30) FORK TO 6201215019
Description : FORK TO 6201215019()
Specification : 188.15.079SB
C
Estab
31) PIN TO 6201215031
Description : PIN TO 6201215031()
Specification : 188.15.114
C
Estab
32) LEVER ASSY TO 6201291105
Description : LEVER ASSY TO 6201291105()
Specification : 219.93-CB188CB
C
Estab
33) LEVER ASSY TO 6201291106
Description : LEVER ASSY TO 6201291106()
Specification : 219.93-CB189CB
C
Estab
34) TORQUE CONTROL WRENCH EXTENSION ASSY to 6201291107
Description : TORQUE CONTROL WRENCH EXTENSION ASSY to 6201291107()
Specification : 219.93.CB196CB
C
Estab
35) ADAPTER ASSY TO 6201291109
Description : ADAPTER ASSY TO 6201291109()
Specification : 219.93.CB198CB
C
Estab
36) EXTENSION FOR BENDING TRACK BOLT FLANGES to 6201291192
Description : EXTENSION FOR BENDING TRACK BOLT FLANGES to 6201291192()
Specification : 172.91.879
C
Estab
37) CAM TO 6201291218
Description : CAM TO 6201291218()
Specification : 219.93.219
C
Estab
38) DEVICE FOR MEASURING TRACK DEFLECTION to 6206008028
Description : DEVICE FOR MEASURING TRACK DEFLECTION to 6206008028()
Specification : 175 91 060CB ACB
C
Estab
39) BUCKET ASSY to 6206008052
Description : BUCKET ASSY to 6206008052()
Specification : 175 91 136CBCB
C
Estab
40) CROSS CUT TRUMP SAW ASSY TO 6206008071
Description : CROSS CUT TRUMP SAW ASSY TO 6206008071()
Specification : 172.91.100CBCB
C
Estab
41) BOX FOR INSTRUMENTS ASSY TO 6206008099
Description : BOX FOR INSTRUMENTS ASSY TO 6206008099()
Specification : 172.91.206CBCB
C
Estab
42) D SHAKLE WITH PIN to 6206008117
Description : D SHAKLE WITH PIN to 6206008117()
Specification : 172.91.277CBCB
C
Estab
43) OIL FILTER FUNNEL ASSY to 6206008140
Description : OIL FILTER FUNNEL ASSY to 6206008140()
Specification : 54.28.3CB-1CB
C
Estab
44) FUNNEL FOR FEEDING THE VEHICLE WITH FUEL OIL AND WATER ASSY TO 6206008145
Description : FUNNEL FOR FEEDING THE VEHICLE WITH FUEL OIL AND WATER ASSY TO 6206008145()
Specification : 54.28.40CB-2CB
C
Estab
45) SLEDGE HAMMER ASSY to 6206008157
Description : SLEDGE HAMMER ASSY to 6206008157()
Specification : 54.28.673CBCB
C
Estab
46) CATCH R H ASSY TO 6206008166
Description : CATCH R H ASSY TO 6206008166()
Specification : 613.28.46CB
C
Estab
47) HANDLE ASSY TO 6206008175
Description : HANDLE ASSY TO 6206008175()
Specification : 613.28.51CB
C
Estab
48) SHAFT TO 6206008249
Description : SHAFT TO 6206008249()
Specification : 175.91.084
C
Estab
49) NOZZLE TO 6206008256
Description : NOZZLE TO 6206008256()
Specification : 175.91.115
C
Estab
50) BOLT TO 6206008329
Description : BOLT TO 6206008329()
Specification : 175.91.326
C
Estab
51) WRENCH S 32 to 6206008340
Description : WRENCH S 32 to 6206008340()
Specification : 175 91 365
C
Estab
52) PIN TO 6206008391
Description : PIN TO 6206008391()
Specification : 172.91.265
C
Estab
53) PIN TO 6206008463
Description : PIN TO 6206008463()
Specification : 172.91.481
C
Estab
54) CROW BAR TO 6206008483
Description : CROW BAR TO 6206008483()
Specification : 172.91.508
C
Estab
55) SMALL ROD FOR KNOCKING OUT TRACK PINS TO 6206008547
Description : SMALL ROD FOR KNOCKING OUT TRACK PINS TO 6206008547()
Specification : 155.28.1622
C
Estab
56) PUSHER TO 6206008638
Description : PUSHER TO 6206008638()
Specification : 54.28.1764
C
Estab
57) GUIDING ROD TO 6206008639
Description : GUIDING ROD TO 6206008639()
Specification : 54.28.1765
C
Estab
58) SHORT CROW BAR TO 6206008675
Description : SHORT CROW BAR TO 6206008675()
Specification : 730.93.266
C
Estab
59) RACHET WHEEL TO 6206008676
Description : RACHET WHEEL TO 6206008676()
Specification : 613.28.042
C
Estab
60) LATCH TO 6206008677
Description : LATCH TO 6206008677()
Specification : 613.28.043
C
Estab
61) WRENCH ASSY TO 6206008834
Description : WRENCH ASSY TO 6206008834()
Specification : 175.91.153CB
C
Estab
62) BOLT TO 6206008837
Description : BOLT TO 6206008837()
Specification : 172.91.330CBCB
C
Estab
63) BOLT TO 6206009103
Description : BOLT TO 6206009103()
Specification : 172.2M.93.003
C
Estab
64) BRACKET L H TO 6206009115
Description : BRACKET L H TO 6206009115()
Specification : 172.2M.93.018
C
Estab
65) BRACKET R H TO 6206009117
Description : BRACKET R H TO 6206009117()
Specification : 172.2M.93.017-A
C
Estab
66) STRIP TO 6206009166
Description : STRIP TO 6206009166()
Specification : 172.2M.93.096
C
Estab
67) ASSY BACK REST TO 6206201005
Description : ASSY BACK REST TO 6206201005()
Specification : 172.15.019CB-3BCB
C
Estab
68) GASKET TO 6206201143
Description : GASKET TO 6206201143()
Specification : 172.15.262-01
C
Estab
69) BOLT TO 6206201213
Description : BOLT TO 6206201213()
Specification : 54.15.013
C
Estab
70) AXLE TO 6206210148
Description : AXLE TO 6206210148()
Specification : 172.27.167
C
Estab
71) BRACE ASSY TO 6206211344
Description : BRACE ASSY TO 6206211344()
Specification : 54.28.772CBCB
C
Estab
72) BRACKET TO 6206214062
Description : BRACKET TO 6206214062()
Specification : 172.65.053
C
Estab
73) PIPE TO 6206304046
Description : PIPE TO 6206304046()
Specification : 175.32.065CB
C
Estab
74) SPLINED BUSH TO 6206304772
Description : SPLINED BUSH TO 6206304772()
Specification : 4546-11
C
Estab
75) NUT TO 6206305660
Description : NUT TO 6206305660()
Specification : CQA(HV).5.33.005
C
Estab
76) DIAPHRAGM BOLT PIN TO 6206305687
Description : DIAPHRAGM BOLT PIN TO 6206305687()
Specification : PM.109
C
Estab
77) PLATE TO 6206306167
Description : PLATE TO 6206306167()
Specification : 175.34.260
C
Estab
78) WASHER TO 6206306188
Description : WASHER TO 6206306188()
Specification : 34.04.285
C
Estab
79) SCREW TO 6206405042
Description : SCREW TO 6206405042()
Specification : 175.44.021
C
Estab
80) AXLE TO 6206501181
Description : AXLE TO 6206501181()
Specification : 172.70.188
C
Estab
81) BRACE ASSY to 6206511039
Description : BRACE ASSY to 6206511039()
Specification : 175 83 027CB
C
Estab
82) DETACHABLE STEP ASSY TO 6206511054
Description : DETACHABLE STEP ASSY TO 6206511054()
Specification : 54.83.131CBCB
C
Estab
83) FINGER TO 6206605014
Description : FINGER TO 6206605014()
Specification : 175.88.013-A
C
Estab
84) SOCKET WRENCH S 8 FOR MOUNTING AND DISMODISMOUNTING THE CLAMPS OF RUBBER TO 6206606003
Description : SOCKET WRENCH S 8 FOR MOUNTING AND DISMODISMOUNTING THE CLAMPS OF RUBBER TO 6206606003()
Specification : 172.90.007CBCB
C
Estab
85) WRENCH SOCKET to 6206606005
Description : WRENCH SOCKET to 6206606005()
Specification : 175.90.006CBCB
C
Estab
86) WRENCH SOCKET S 27 to 6206606008
Description : WRENCH SOCKET S 27 to 6206606008()
Specification : 54.28.696SB-A
C
Estab
87) SPANNER TO 6206606014
Description : SPANNER TO 6206606014()
Specification : 175.90.004
C
Estab
88) HOOK to 6206606017
Description : HOOK to 6206606017()
Specification : 175.90.013
C
Estab
89) SCREW DRIVER TO 6206606021
Description : SCREW DRIVER TO 6206606021()
Specification : 172.90.016
C
Estab
90) SOCKET WRENCH 11 x 14 to 6206606030
Description : SOCKET WRENCH 11 x 14 to 6206606030()
Specification : 54.28.040-1A
C
Estab
91) SOCKET WRENCH 10 X 12 TO 6206606031
Description : SOCKET WRENCH 10 X 12 TO 6206606031()
Specification : 54.28.045-1
C
Estab
92) BAR FOR WRENCHES TO 6206606032
Description : BAR FOR WRENCHES TO 6206606032()
Specification : 54.28.054-1A
C
Estab
93) WRENCH 5 5 x 7 to 6206606043
Description : WRENCH 5 5 x 7 to 6206606043()
Specification : 54.28.1685
C
Estab
94) SOCKET WRENCH 17 x 22 to 6206606044
Description : SOCKET WRENCH 17 x 22 to 6206606044()
Specification : 34.28.664
C
Estab
95) CONTAINER STOVE TO 6206606123
Description : CONTAINER STOVE TO 6206606123()
Specification : 7320.000008
C
Estab
96) TAWA M S SHEET 1 25mm THICK to 6206606128
Description : TAWA M S SHEET 1 25mm THICK to 6206606128()
Specification : 7320.000013
C
Estab
97) WRENCH TORQUE ASSY to 6206607157
Description : WRENCH TORQUE ASSY to 6206607157()
Specification : 613.28.50CB-A
C
Estab
98) SCREW TO 6206607887
Description : SCREW TO 6206607887()
Specification : LO29.02.9
C
Estab
99) APPLIANCE FOR CRANKING ENGINE TO 6206611102
Description : APPLIANCE FOR CRANKING ENGINE TO 6206611102()
Specification : 172.95.126CBCB
C
Estab
100) ADAPTER TO 6206702023
Description : ADAPTER TO 6206702023()
Specification : 172.60.068CBCB
C
Estab
101) WRENCH FOR BOLTS HYDRAULIC SHOCK ABSORBER TO 6206702088
Description : WRENCH FOR BOLTS HYDRAULIC SHOCK ABSORBER TO 6206702088()
Specification : 172.95.102CB
C
Estab
102) FIXTURE FOR PRESSING OFF THE PLANET PINION OF FINAL DRIVE ASSY TO 6206702097
Description : FIXTURE FOR PRESSING OFF THE PLANET PINION OF FINAL DRIVE ASSY TO 6206702097()
Specification : 172.95.120CBCB
C
Estab
103) WRENCH FOR GEAR BOX SECONDARY SHAFT ASSY TO 6206702225
Description : WRENCH FOR GEAR BOX SECONDARY SHAFT ASSY TO 6206702225()
Specification : 432.95.029CBCB
C
Estab
104) WRENCH FOR BOLTS FASTENING THE TURRET BALL RACE TO THE HULL TO 6206702231
Description : WRENCH FOR BOLTS FASTENING THE TURRET BALL RACE TO THE HULL TO 6206702231()
Specification : 432.95.409CB
C
Estab
105) GREASE GUN to 6206702233
Description : GREASE GUN to 6206702233()
Specification : 155.28.670CB
C
Estab
106) SPANNER TO 6206702572
Description : SPANNER TO 6206702572()
Specification : 172.95.223
C
Estab
107) TRANSITION UNION NIPPLE FOR GUN PRESS to 6206702577
Description : TRANSITION UNION NIPPLE FOR GUN PRESS to 6206702577()
Specification : 172.95.229
C
Estab
108) WRENCH TO 6206702778
Description : WRENCH TO 6206702778()
Specification : 175.90.014
C
Estab
109) SPANNER S 30 TO 6206702838
Description : SPANNER S 30 TO 6206702838()
Specification : 175.95.151
C
Estab
110) EYE BOLT TO 6206703090
Description : EYE BOLT TO 6206703090()
Specification : 432.95.109
C
Estab
111) COUPLING NUT TO 6206791073
Description : COUPLING NUT TO 6206791073()
Specification : 54.28.334B
C
Estab
112) WRENCH NUT TO 6206791160
Description : WRENCH NUT TO 6206791160()
Specification : 150.28.217
C
Estab
113) TOOL FAN SPEED CHANGE LEVER to 6209890013
Description : TOOL FAN SPEED CHANGE LEVER to 6209890013()
Specification : PV572 0734 0024
C
Estab
Category : p
Grade : 2
Size :
S
269
THE INDUSTRY
41A/2, R.N. Das Road, Kolkata WEST BANGAL
PIN1 : 700031
Phone No. : 033 24154803 GSTIN :
19AACFT8575H1ZM
ARKKAYS NATIONAL ENGINEERING AND FOUNDRY COMPANY
B-73,SIPCOT INDUSTRIAL PARK, IRRUGATTUKOTTAI SRIPERUMPUDUR KANCHEEPURAM DISTRICT TAMILNADU
PIN1 : 602117
Phone No. : 9840081718
1) STEEL BAR TO SPECN NO IS 4431 DASH 78 DESIGNATION 14C 14S14 BRAKET C D BRACKET CLOSE IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22 DASH ZERO POINT 052 MM DIA
Description : STEEL BAR TO SPECN NO IS 4431 DASH 78 DESIGNATION 14C 14S14 BRAKET C D BRACKET CLOSE IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22 DASH ZERO POINT 052 MM DIA()
Specification : STEEL BAR TO SPECN NO IS: 4431- 78 DESIGNATION 14C 14S14 (C/ D) IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22.00- 0.052 MM DIA
R
Estab
Category : ddp
Grade : 1
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 32MM 50 TY 14 1 2884 80 LF 0187100032
Description : STEEL ROD 32MM 50 TY 14 1 2884 80 LF 0187100032()
Specification : STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MAT
R
Estab
Category : p
Grade : 3
Size :
M
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 18MM BS970 080M50 CD ANL Lf 0133001165
Description : STEEL ROD 18MM BS970 080M50 CD ANL Lf 0133001165()
Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R
R
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 41MM JSS 9510 01 SS C24 A LF 0113000041
Description : STEEL ROD 41MM JSS 9510 01 SS C24 A LF 0113000041()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK
1) RIVET SOLID BLOCK REAR FOR RIFLE 5.56MM INSAS. ()
AS PER DRAWING
C
Not Estab.
2) COVER GUN MUZZLE FOR RIFLE 5.56MM INSAS(PLASTIC ITEM).()
AS PER DRAWING
C
Non Established
Category : P
Grade : II
Size :
S
1Opto Electronic Factory
Name
Specification
Use
Status
1) JACKET AF6 832 087 LF NO 9927084268[99]()
Specification : PACKING MATERIAL
C
Nonestab
2) SILICA GEL BLUE DRYING AGENT LF NO 9927063976[99]()
Specification : SILICA GEL BLUE DRYING AGENT LF NO 9927063976
C
Nonestab
3) SEALING CUP LF NO 7445001429[74]()
Specification : SEALING CUP LF NO 7445001429
C
Nonestab
4) FILM PET E 20X25 GOST 24234 80 LF NO 7440020170[74]()
Specification : FILM PET E 20X25 GOST 24234- 80 LF NO 7440020170
C
Nonestab
5) COVER LF NO 7440205869[74]()
Specification : COVER LF NO 7440205869
C
Nonestab
6) VARNISHED GLASS CLOTH LSKL 155 LF NO 7445111558[74]()
Specification : VARNISHED GLASS CLOTH LSKL- 155 LF NO 7445111558
C
Nonestab
7) ELECT INSULAT VARNISHED FABRIC LF NO 2101091003[21]()
Specification : ELECT INSULAT VARNISHED FABRIC LF NO 2101091003
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) FILTER()
DRG NO.432.32.008CBCB
C
Not Estab.
2) COVER FOR INSPECTION LAMP ASSY()
DRG NO. 172.91.179CBCB
C
Not Estab.
3) GASKET()
DRG NO.434.23.122
C
Not Estab.
4) WIRE MESH()
DRG.NO.176.34.016CBCB
C
Non Established
Category : P
Grade : III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6495000070 LEATHER WASHER LUB FOR 105MM IFG HE[64]()
Specification : LEATHER WASHER LUBRICATED, DIA 59.69 MM, DESIGNER REF.CIA(A)-177.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141800106 WASHER SPRING ITX-240 MINE AP 1B DR[61]()
Specification : WASHER, SPRING FOR ASSLY OF MINE AP 1B DIRECTIONAL.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2102481802 LEATHER CHAMOIS GR.II 600 X 350 MM[21]()
Specification : SPECN IS: 1017-1983 REAFFIRMED 1995
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6334100727 SPRING WASHER DIA 4MM FOR PINAKA RK[63]()
Specification : STAINLESS STEEL MACHINED WASHER DIA 4.5MM IS 2016 OR DIN125A OR EQUIVALENT
C
Nonestab
2) 6334100728 STEEL MACHINED WASHER FOR PIN[63]()
Specification : IS 2016
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6584113922 WASHER C TO DRG PT NO ISV 1591[65]()
Specification : JSS 8010-63-1991
C
Nonestab
2) 6584113923 WASHER D TO DRG PT NO ISV 1592[65]()
Specification : JSS 8010-63-1991
C
Nonestab
3) 2199641002 WASHER A B FOR CONTAINER 39A[21]()
Specification : JSS 9330-03-1995
C
Nonestab
4) 6454000054 WASHER TO ERDL DRG 1287 DET NO 2[64]()
Specification : HEMRL/PYRO/PS/207(C)
C
Nonestab
5) 6331800103 WASHER AL DRG PART NO QX 176[63]()
Specification : WASHER (ALUMINIUM) TO DRG. PART NO. QX-176 DC-35781-A.
C
Nonestab
6) 6473200461 WASHER NITRILE TO DRG NO 155 1120[64]()
Specification : WASHER, MAT.:NITRILE BLACK SHORE HARDNESS 80+-5 TO DES.REF. 155-1120 DC NO. 36792-A DT. 01.11.2001 FOR SHELL 155 MM HE BB M1A4.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6173500400 WASHER STEEL ITX 241[61]()
Specification : WASHER (STEEL) TO DRG. PT. NO. ITX 241 DC 35824-A SPECN. IA-1285(B) DC 35203-A
C
Nonestab
2) 6571523799 WASHER POLY ISV 1465 FOR CON 63A[65]()
Specification : POLYTHENE WASHER TO DRG.PART NO. ISV 1465 DC NO. 30799-A(FOR AMMN. CONTAINER 63A) , MATL:- HDPE TYPE-ISPECN.NO. JSS 9330-03 DC NO. 3490-ME.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) PARACHUTE SYSTEM FOR 84 MM CARL GUSTAF ILLG AMMN GEN ASSY TO DRG NO[62]()
Specification : DRG NO ADRDE/543(b) 9 SHEET SHEET NO 1( WITHOUT LOOP BAND )
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BAG 3A/L CANVAS FOR AMMN. CONTAINER ASSY. 148 A[65]()
Specification : DRG. NO. ARDE-2125 DET NO. 1 PT. NO. ISV 532 A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ALUMINIUM FOIL BAG DRG 14059 0 0 LF 2101057012[21]()
Specification : ALUMINIUM FOIL BAG TO DRG NO 14059-0-0 DC-34274-A DATE 23/11/1987
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9080081524 COVER CANVAS MULT APPLICATION TO DRG NO1015 000955[90]()
Specification : COVER CANVAS MULT APPLICATION TO DRG NO1015 000955
C
Nonestab
2) 9080081582 COVER CANVAS MULTI APPLICATION TO PART NO 1015 000957[90]()
Specification : COVER CANVAS MULTI APPLICATION TO PART NO 1015 000957
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9080086733 COVER GUN AND CARRIAGE 3A1 105 37 1B TO 1015 002725[90]()
Specification : COVER GUN AND CARRIAGE 3A1 105 37 1B TO 1015 002725
C
Nonestab
2) 9080081524 COVER CANVAS MULT APPLICATION TO DRG NO1015 000955[90]()
Specification : COVER CANVAS MULT APPLICATION TO DRG NO1015 000955
C
Nonestab
3) 9080081582 COVER CANVAS MULTI APPLICATION TO PART NO 1015 000957[90]()
Specification : COVER CANVAS MULTI APPLICATION TO PART NO 1015 000957
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Nalanda
Name
Specification
Use
Status
1) IGNITER BAG FOR M-92[63]()
Specification : AS PER ATTACHED FILE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2101099400 NET COTTON SPECN NO HEMRL GP PS 252[21]()
Specification : NET COTTON TO SPECN. NO. HEMRL / GP / PS / 252 (PROV) & DES.REF. HEMRL- 1399R1 TO DRG. PART NO. IRW 240.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6331401018 CATCH LOCKING TO DRG NO 1A 793 AND PART NO ISV 1A[63]()
Specification : CATCH LOCKING TO DRG NO. 1A 793 AND PART NO. ISV 1A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) LIFE JACKET TO 6201000281[62]()
Specification : LIFE JACKET TO SPEC NO. TY:17PCFCP7172-75
C
Nonestab
2) TARPAULIN ASSY TO 6201291098[62]()
Specification : TARPAULIN ASSY TO DRG NO. 172.91.386CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) LEATHER WASHER TO CQA AMMN DRG NO 3 016919 DETAIL 51DC I 36154 A DT 17 8 96 WITHOUT APC TREATMENT[21]()
Specification : LEATHER WASHER TO CQA(AMMN.) DRG. NO. 3-016919 DETAIL-51DC(I) 36154-A DT. 17.8.96. WITHOUT APC TREATMENT
C
Estab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Rivet MS Snap Head[70]()
Specification : RIVET M.S. SNAP HEAD 1.59 DIA X 4.19 L TO BSS 641:1951 TABLE ...2 (CADMIUM PLATED) TO BE RIVETED ON DEVICE FIRING 1B
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Rivet Flat Head for Housing Body Barrel Extension and Bracket Front[70]()
Specification : Rivet Flat Head for Housing Body Barrel Extension and bracket front to Drg. No. SK-3145/10 Phosphated to Spech-JSS-0465-01-1988 Class II Oil Finish
1) BAG CALICO CLOTH WHITE
Description : BAG CALICO CLOTH WHITE()
Specification : BAGS CALICO CLOTH WHITE TO DRG NO.OFI/MA/140 (PROV) R5 AND CLOTH CONFIRMING TO SPEC NO.IS:5088-1982 VARIETY NO.3 (FIRST REVISION) WITH AMENDMENT NO.2REAFFIRMED-2017.
R
Estab
Category : ddp
Grade : 1
Size :
S
1Ordnance Factory Itarsi
[ENR Registration]
Name
Specification
Use
Status
1) BAG CALICO CLOTH WHITE
Description : BAG CALICO CLOTH WHITE()
Specification : BAGS CALICO CLOTH WHITE TO DRG NO.OFI/MA/140 (PROV) R5 AND CLOTH CONFIRMING TO SPEC NO.IS:5088-1982 VARIETY NO.3 (FIRST REVISION) WITH AMENDMENT NO.2REAFFIRMED-2017.
MILD STEEL STRIP 100+/-1 MM WIDE x 26 BG (0.50MM) THICK IN ROLLS COLD DRAWN ANNEALED BEST SURFACE TYPE D MATT FINISHTO SPECN:-IS-513-2008 (FIFTH REVISION) WEIGHT OF EACH ROLLSHOULD BE BETWEEN 50 KG TO 100 KG.
1) STEEL SHEET SIZE 1 25 MM THICK X 900 MM WIDTH X 2500 MM LENGTH TO SPECN IS 513 1994 COLD ROLLED AND ANNEALED TYPE D BEST SURFACE[70]()
Specification : STEEL SHEET SIZE 1.25 MM THICK X 900 MM WIDTH X 2500 MM LENGTH TO SPECN IS:513-1994 COLD ROLLED AND ANNEALED TYPE 'D' BEST SURFACE
R
Estab
Category : dp
Grade : Grade II
Size :
M
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL SHEET 1 MM THICK X 1000 X 2500 MM LONG TO SPECN IS 1079 1988 GD ST42 OR IS 513 LATEST COLD ROLLED ANNEALED BEST TYPE D[70]()
Specification : STEEL SHEET 1 MM THICK X 1000 X 2500 MM LONG TO SPECN IS :1079-1988, GD. ST42 OR IS:513 LATEST COLD ROLLED ANNEALED BEST TYPE D
R
Estab
Category : dp
Grade : Grade II
Size :
M
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL SHEET SIZE 3 MM THICK X 1000 MM WIDTH X 2500 MM LONG TO SPECN IS 513 1449 BEST SURFACE TYPE D CRA BS 1994 PT I 72 SECTION 2 CS CORE CRA OR IS 1079 1994 ST34 HOT ROLLED AND ANNEALED OR IS 513 LATEST ISSUE COLD ROLLED AND ANNEALED BEST TYPE D[70]()
Specification : SHEET SIZE 3 MM THICK X 1000 MM WIDTH X 2500 MM LONG TO SPECN IS: 513-1994 BEST SURFACE TYPE 'D' (CRA) BS:1449 PT-I-72, SECTION 2 CS CORE (CRA) OR IS:1079-1994 ST34 HOT ROLLED & ANNEALED OR IS:513 LATEST ISSUE COLD ROLLED AND ANNEALED BES
