List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
101 PIVOT FABRIQUE HP
VILLAGE- DHEROWAL, P.O.- MAJHOLI TEH: NALAGARH SOLAN HIMANCHAL PRADESH
PIN1 : 174101
Phone No. : 01795-200325
GSTIN : 02AAHFP2766R1ZQ 		PTLP12659D

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) LEAF SPRG. REAR SIGHT FOR JVPC Description : LEAF SPRG. REAR SIGHT FOR JVPC() Specification : C Estab
Category : p
Grade : 3
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) INTERMEDIATE CASING TO CQA (A) SEALED DRG. NO. 04-749-130222-02.1E() CQA (A) DRG. NO. 04-749-130222-02.1E C Estab.
2) IGNITER CASING TO CQA (A) SEALED DRG. NO. 04-749-130222-03.1E() CQA (A) DRG. NO. 04-749-130222-03.1E C Estab.
3) SMOKE COMPOSITION CASING TO CQA (A) SEALED DRG. NO. 04-749-130222-05.1E() CQA (A) DRG. NO. 04-749-130222-05.1E C Estab.
4) CAP WITH HOLDER FFV-840 DRG. NO. F-1334-230761-C() DRG. NO. F-1334-230761-C C Estab.
5) FIRING PIN TO CQA (A) SEALED DRG. NO. 04-749-130222-03.2E() CQA (A) DRG. NO. 04-749-130222-03.2E C Estab.
6) IGNITION ELEMENT (EMPTY) TO DRG. NO. CQA(A)/AMN/3229 PT. NO. IQV 30A() DRG. NO. CQA(A)/AMN/3229 PT. NO. IQV 30A C Estab.
7) SWITCH NO. 4 PULL MK-1/L EMPTY ASSEMBLY TO DRG. NO. DD(L) 15250() DRG. NO. DD(L) 15250 C Estab.
8) SWITCH NO. 10 TIME & PENCIL MK-2/1 EMPTY TO DRG. NO. CQA(A)/AMN/2980 PT. NO. IQX 81 GE() DRG. NO. CQA(A)/AMN/2980 PT. NO. IQX 81 GE C Estab.
Category : P
Grade : II
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHUTTER PLATE TBRL LF NO 9911358300 Description : SHUTTER PLATE TBRL LF NO 9911358300() Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0 C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

Name Specification Use Status
1) UNIT BURST CONTROL FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
2) SCREW SPECIAL FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
3) PIN GROVED HEADED FOR HAMMER FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
4) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
5) PIN FIRING FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
6) PLUG GAS FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
7) CATCH MAGAZINE FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
8) STUD COCKING HANDLE FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
9) CHANNEL RIGHT FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
10) WHEEL LOCK FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
Category : P
Grade : I
Size : S
1Ordnance Factory Varangaon

Name Specification Use Status
1) STEEL INSERT FOR 5.56 MM INSAS() DRG NO. IQV 112 DCI NO 36853-A DTD 24.9.02 C ESTAB
2) STEEL CORE FOR AK-47 BULLET() DRG NO.VA7/PROV/009 C ESTAB
Category : P
Grade : II
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHUTTER SPRING TBRL LF NO 9911358297 Description : SHUTTER SPRING TBRL LF NO 9911358297() Specification : SHUTTER SPRING TO DRG. NO. TBRL/MMG-H/MK1/031/R1 R Estab
2) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528 Description : 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528() Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/ R Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527[99]() Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/ MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2 C Estab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) PLUNGER TO DRG NO TRD 1 1 3147a L F 9911358303[99]() Specification : PLUNGER TO DRG.NO.TRD-1-1-3147 'a' C Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) CAP TO DRG NO NAI J 501 4 ARD NO 2428 DT 21 11 12 Description : CAP TO DRG NO NAI J 501 4 ARD NO 2428 DT 21 11 12() Specification : CAP TO DRG. NO. NAI(J) 501/4 ARD NO. 2428, DT 21.11.12 C Estab
2) SAFETY LOCK ASSY TO DRG NO 6 042 512 TF 038 SARAT Description : SAFETY LOCK ASSY TO DRG NO 6 042 512 TF 038 SARAT() Specification : SAFETY LOCK ASSY TO DRG NO 6.042.512 (TF-038) SARAT C Estab
3) SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION Description : SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION() Specification : SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION C Estab
4) PIN SAFETY STRIKER IQX 309 Description : PIN SAFETY STRIKER IQX 309() Specification : PIN SAFETY STRIKER TO PT. NO. IQX-309 IN FINISHED CONDITION C Estab
5) STRIKER IN F/ COND. TO DRG. NO.IQX-324 FOR FMC 605 M Description : STRIKER IN F/ COND. TO DRG. NO.IQX-324 FOR FMC 605 M() Specification : STRIKER IN FINISHED CONDITION TO DRG PT. NO IQX-324, DC 35573 A DATED 2/9/93 C Estab
Category : dp
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
2) PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5 Description : PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5() Specification : AS PER DRG. C Estab
3) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM Description : PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
4) Unit Burst Control DS CAT No.1005-007791 Description : Unit Burst Control DS CAT No.1005-007791() Specification : Unit Burst Control to DS CAT No. 1005-007791 in finished condition C Estab
5) PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56 Description : PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56() Specification : PIN CARRYING HANDLE TO DRG NO-ARDE/SK-3146/33 IN FINISHED CONDITION. DS CAT NO. 5315-030876,DC(I)NO.26946-SA DT.-22/09/2016 C Estab
6) Unit auto drg .no. ARDE SK – 2825/62 / 1005-007927 for LMG 5.56mm Description : Unit auto drg .no. ARDE SK – 2825/62 / 1005-007927 for LMG 5.56mm() Specification : AS PER DRG. C Estab
7) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016 C Estab
8) STUD COCKING HANDLE INSAS 5.56 MM Description : STUD COCKING HANDLE INSAS 5.56 MM() Specification : ARDE/SK-3143/35 C Estab
9) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
10) Pin Grooved Headed for Hammer DS CAT NO 5315 009190 Description : Pin Grooved Headed for Hammer DS CAT NO 5315 009190() Specification : Pin Grooved Headed for Hammer DS CAT NO 5315 009190 C Estab
11) REFLECTOR TO DS CAT NO. 1005-560616 Description : REFLECTOR TO DS CAT NO. 1005-560616() Specification : AS PER DRG. C Estab
12) Channel left for Carbine 5 point 56 Description : Channel left for Carbine 5 point 56() Specification : AS PER DRG. C Estab
13) CHANNEL RIGHT FOR INSAS 5.56 MM Description : CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
14) RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : RETAINER TO DRG.NO.ARDE SK-2689/90 IN FINISHED CONDITION. DS CAT NO.1005-007824 DC(I)NO.26547-SA DT.24.11.2010 C Estab
15) Stopper Front in F/D Cond. To DSCAT No. 1005-007782 Description : Stopper Front in F/D Cond. To DSCAT No. 1005-007782() Specification : AS PER DRG. C Estab
16) CATCH MAGAZINE FOR INSAS 5.56 MM Description : CATCH MAGAZINE FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
17) PIN GROOVED HEADED FOR TRIGGER AND SAFETY SEAR FOR CARBINE 5 56 Description : PIN GROOVED HEADED FOR TRIGGER AND SAFETY SEAR FOR CARBINE 5 56() Specification : PIN GROOVED HEADED FOR TRIGGER & SAFETY SEAR TO DRG NO. ARDE/SK-2689/132 DS CAT NO. 5315-009189 DC(I) NO.26930-SA DT. 06.09.16. C Estab
18) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
19) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
20) SPRING ITEMS FOR SMALL ARMS Description : SPRING ITEMS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
21) LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER Description : LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER() Specification : LEVER CAM DRG PH-1-3 IN FINISHED CONDITION. D.A. NO. 35/04 DT. 09-04-04 C Estab
22) LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 Description : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99() Specification : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 C Estab
23) PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION Description : PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION() Specification : PIN FIXING BARREL TO DRG NO.PH-1-9 IN FINISHED CONDITION. D.A. NO. 19/09 DT. 15-05-2009 C Estab
24) STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
25) PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99 Description : PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99() Specification : PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99 C Estab
26) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
27) BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 Description : BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99() Specification : BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 C Estab
28) PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 Description : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99() Specification : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 C Estab
29) PIN CATCH TRIGGER PH-7-3 Description : PIN CATCH TRIGGER PH-7-3() Specification : PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION.D.A. NO. 36/08 DT. 13-05-2008 C Estab
30) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
31) SCREW FIXING LEVER CAM TO DRG NO PH 1 20 IN FINISHED CONDITION Description : SCREW FIXING LEVER CAM TO DRG NO PH 1 20 IN FINISHED CONDITION() Specification : SCREW FIXING LEVER CAM TO DRG.NO PH-1-20 IN FINISHED CONDITION. D.A. NO. 06/04 DT. 24.01.04 C Estab
32) Plunger in Finished Condn.PH 1-24 Description : Plunger in Finished Condn.PH 1-24() Specification : As Per Drg. C Estab
33) SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 Description : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04() Specification : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 C Estab
34) STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 Description : STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99() Specification : STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 C Estab
35) SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER Description : SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER() Specification : SCREW PIN FIXING BARREL& LEVER CAM DRG.PH-1-17 (IN SOFT CONDITION) D.A. NO. 19/09 DT. 15.05.09 C Estab
36) COLLAR MOUNTING FRONT for MAG Description : COLLAR MOUNTING FRONT for MAG() Specification : COLLAR MOUNTING FRONT TO DS CAT NO.3120-004671 DC(I) NO.25310-SA DT.30/03/02 IN FINISHED CONDITION C Estab
Category : p
Grade : 3
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) STEEL INSERT FOR NATO BULLET() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 R Estab
2) SPACER RING DRG.NO.04-749-130222-03() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E R Estab
3) PLUNGER DRG.NO.04-44-79000-06111-4 E() Specification : DRG. NO. 04-44-79000- 06111-4 E R Estab
4) IGNITION ELEMENT04-44-79000-06105-4E() Specification : DRG.NO. 04-44-79000-06105-4E R Estab
5) STEEL INSERT FOR A 7 BULLET() Specification : STEEL INSERT (MODIFIED) FOR BULLET, DRG. NO. AFK/SK- 2556 SHEET NO. 1 DT. 8-8-2001 R Estab
6) PLUNGER GUIDE 04-44-79000-06112-4 E() Specification : DRG NO.04-44- 79000-06112-4 E R Estab
Category : p
Grade : 2
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) STEEL INSERT FOR NATO BULLET() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 R Estab
2) SPACER RING DRG.NO.04-749-130222-03() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E R Estab
3) PLUNGER DRG.NO.04-44-79000-06111-4 E() Specification : DRG. NO. 04-44-79000- 06111-4 E R Estab
4) IGNITION ELEMENT04-44-79000-06105-4E() Specification : DRG.NO. 04-44-79000-06105-4E R Estab
5) STEEL INSERT FOR A 7 BULLET() Specification : STEEL INSERT (MODIFIED) FOR BULLET, DRG. NO. AFK/SK- 2556 SHEET NO. 1 DT. 8-8-2001 R Estab
6) PLUNGER GUIDE 04-44-79000-06112-4 E() Specification : DRG NO.04-44- 79000-06112-4 E R Estab
Category : p
Grade : 3
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) STEEL INSERT FOR NATO BULLET() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 R Estab
2) SPACER RING DRG.NO.04-749-130222-03() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E R Estab
3) PLUNGER DRG.NO.04-44-79000-06111-4 E() Specification : DRG. NO. 04-44-79000- 06111-4 E R Estab
4) IGNITION ELEMENT04-44-79000-06105-4E() Specification : DRG.NO. 04-44-79000-06105-4E R Estab
5) STEEL INSERT FOR A 7 BULLET() Specification : STEEL INSERT (MODIFIED) FOR BULLET, DRG. NO. AFK/SK- 2556 SHEET NO. 1 DT. 8-8-2001 R Estab
6) PLUNGER GUIDE 04-44-79000-06112-4 E() Specification : DRG NO.04-44- 79000-06112-4 E R Estab
Category : p
Grade : 3
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) STEEL INSERT FOR NATO BULLET() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 R Estab
2) SPACER RING DRG.NO.04-749-130222-03() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E R Estab
3) PLUNGER DRG.NO.04-44-79000-06111-4 E() Specification : DRG. NO. 04-44-79000- 06111-4 E R Estab
4) IGNITION ELEMENT04-44-79000-06105-4E() Specification : DRG.NO. 04-44-79000-06105-4E R Estab
5) STEEL INSERT FOR A 7 BULLET() Specification : STEEL INSERT (MODIFIED) FOR BULLET, DRG. NO. AFK/SK- 2556 SHEET NO. 1 DT. 8-8-2001 R Estab
6) PLUNGER GUIDE 04-44-79000-06112-4 E() Specification : DRG NO.04-44- 79000-06112-4 E R Estab
Category : p
Grade : 3
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) STEEL INSERT FOR NATO BULLET() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 R Estab
2) SPACER RING DRG.NO.04-749-130222-03() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E R Estab
3) PLUNGER DRG.NO.04-44-79000-06111-4 E() Specification : DRG. NO. 04-44-79000- 06111-4 E R Estab
4) IGNITION ELEMENT04-44-79000-06105-4E() Specification : DRG.NO. 04-44-79000-06105-4E R Estab
5) STEEL INSERT FOR A 7 BULLET() Specification : STEEL INSERT (MODIFIED) FOR BULLET, DRG. NO. AFK/SK- 2556 SHEET NO. 1 DT. 8-8-2001 R Estab
6) PLUNGER GUIDE 04-44-79000-06112-4 E() Specification : DRG NO.04-44- 79000-06112-4 E R Estab
Category : p
Grade : 3
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) STEEL INSERT FOR NATO BULLET() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 R Estab
2) SPACER RING DRG.NO.04-749-130222-03() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E R Estab
3) PLUNGER DRG.NO.04-44-79000-06111-4 E() Specification : DRG. NO. 04-44-79000- 06111-4 E R Estab
4) IGNITION ELEMENT04-44-79000-06105-4E() Specification : DRG.NO. 04-44-79000-06105-4E R Estab
5) STEEL INSERT FOR A 7 BULLET() Specification : STEEL INSERT (MODIFIED) FOR BULLET, DRG. NO. AFK/SK- 2556 SHEET NO. 1 DT. 8-8-2001 R Estab
6) PLUNGER GUIDE 04-44-79000-06112-4 E() Specification : DRG NO.04-44- 79000-06112-4 E R Estab
Category : p
Grade : 2
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) STEEL INSERT FOR NATO BULLET() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 R Estab
2) SPACER RING DRG.NO.04-749-130222-03() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E R Estab
3) PLUNGER DRG.NO.04-44-79000-06111-4 E() Specification : DRG. NO. 04-44-79000- 06111-4 E R Estab
4) IGNITION ELEMENT04-44-79000-06105-4E() Specification : DRG.NO. 04-44-79000-06105-4E R Estab
5) STEEL INSERT FOR A 7 BULLET() Specification : STEEL INSERT (MODIFIED) FOR BULLET, DRG. NO. AFK/SK- 2556 SHEET NO. 1 DT. 8-8-2001 R Estab
6) PLUNGER GUIDE 04-44-79000-06112-4 E() Specification : DRG NO.04-44- 79000-06112-4 E R Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN TRIGGER & SAFETY SEAR FOR SMALL ARMS Description : PIN TRIGGER & SAFETY SEAR FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
Category : p
Grade : 3
Size : S
102 Narottamdas and company
41, Babulban, Shastri Nagar Square, Garoba Maidan Nagpur Maharashtra
PIN1 : 440008
Phone No. : 0712-2769326
GSTIN : 27AADHM6696P1Z8 		AADHM6696P

Download 		1Ordnance Factory Bhandara

Name Specification Use Status
1) Sulphuric Acid ( Tech Grade )() Specn. No. IS:266 :1993 ( Latest Revision ) R Estab.
2) Oleum Tech. grade for explosive() As per OFBA requirement R Estab.
3) Caustic Soda Tech. Flakes() IS: 252-1991 ( Latest Revision ) reaffirmed 2003 R Estab.
4) Soda Ash ( Light ) Technical() IS: 251- 1998 ( Latest Revision ) Reaffirmed 2005 R Estab
5) SPIRIT DENATURED SPECIAL() Specn-IS 323-1959 Revised (reaffirmed-2005)DC-3809-ME Dt 5.5.04 R Non Established
6) INDUSTRIAL X RAY FILM() IS:2595-1978 R Established
7) Ether Solvent() Specn No-IS-336-1973 IInd Rev Reaffirmed-2002 Ammendment 1DC 3811-ME dtd05.05.2004 R Non Established
8) Sodium Nitrate of puri,percent by mass minium 98% () Specn No-IS-12681/1989 R Established
9) Paraffin Wax Special Grade (soft & hard)() Specn-IS:7401-1987 First Rev amme 2005 R Non Established
10) Methanol() Specn-BF 1.19 dtd-06.10.1996 amme 2005 R Non Established
11) Di Phenyl Amine() Specn-JSS 6810-129-2009 Rev 2 R Non Established
12) Potassium Sulphate() Specn-JSS-6810-110:2011 Rev 3 R Non Established
Category : S
Grade : III
Size : S
1Ordnance Factory Itarsi

Name Specification Use Status
1) SODIUM SULPHATE ANHYDROUS TECH. Gr.A() OFI/0015//SPN DTD. 17.06.1994 R ESTB
Category : S
Grade : II
Size : S
1High Explosive Factory

Name Specification Use Status
1) ORTHO NITRO TOLUENE[10]() Specification : IS: 8397- 1976 REAFF. 2016 WITH ADDITIONAL CLAUSE OF NITROBENZENE CONTENT 0.10% MAXIMUM. R Nonestab
Category :
Grade : Grade III
Size : S
1Cordite Factory Arvankadu

Name Specification Use Status
1) ACETONE() IS 170-2004 R NOT ESTAB
2) ACID NITRIC EXPLOSIVE GRADE 98.5% MIN() IS 264-2005 III REV R Non Established
3) POTASSIUM NITRATE() JSS-8010-110-2003 REV.II R Non Established
Category : S
Grade : II
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) ALUMINIUM POWDER HEAVY GR.1 [ITEM CODE-1001017225]() SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS. R NOT ESTABLISHED
Category : S
Grade : II
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) KAOLIN JSS-9620-02 (1001410103)() KAOLIN TO SPECN: JSS-9620-02 : 2010 REVISION NO. 2 DC NO. 5000-ME DT. 5-1-2011 R NOT ESTABLISHED
Category : S
Grade : II
Size : O
1Ordnance Factory Khamaria

Name Specification Use Status
1) BORAX CRYSTAL PURE GRADE(1001054123)() Specification : SPECN.: IS-1109-1980 (2ND REV.) REAFFIRMED 1997 DC NO. 3777-ME DT. 25/09/03 R Estab
Category : S
Grade : III
Size : S
1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Ether Solvent Grade Description : Ether Solvent Grade() Specification : Specn. No. IS:336-1973 ( second Revision ) reaffirmed - 2002 D.C. 3811- ME Dtd 05-05-04 R Estab
2) ETHYL CELLULOSE HIGH VISCOCITY TYPE N-200 Description : ETHYL CELLULOSE HIGH VISCOCITY TYPE N-200() Specification : CETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND M R Estab
3) TOLUENE NITRATION GRADE Description : TOLUENE NITRATION GRADE() Specification : TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN. IS:537 OF 1967 (FIRST REVISION) REAFFIRMED 1991 WITH AMENDMENT 1 AND 2, DC-3807-ME DATED 05/05/2004 R Estab
Category : s
Grade : 1
Size : S
1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Di-Phenyl Amine Description : Di-Phenyl Amine() Specification : DIPHENYLAMINE CONFORMING TO SPECIFICATION JSS 6810-129-2015 REVISION NO 3. R Estab
2) DI ETHYL PHTHALATE Description : DI ETHYL PHTHALATE() Specification : DIETHYL PHTHALATE CONFORMING TO SPECN IND/ME/873(A)(PROV)- DC NO.3754-ME DATED 12.12.2002 R Estab
Category : s
Grade : 3
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) IND X-RAY FILM SIZE 30.5 X 38.1 .() Specification : TYPE MEDIUM SPEED , FINE GRAIN , HIGH CONTRAST EQUIVALENT TO IRF-150(INDU) OR STRUCTURIX D7(AGFA), INDUSTREX AX,AA )KODAK ) R Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) DI ETHYL PHTHALATE Description : DI ETHYL PHTHALATE() Specification : DIETHYL PHTHALATE CONFORMING TO SPECN IND/ME/873(A)(PROV)- DC NO.3754-ME DATED 12.12.2002 R Estab
Category : s
Grade : 3
Size : S
1Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) FIXING POWDER Description : FIXING POWDER() Specification : FIXING POWDER R Estab
2) SODA ASH Description : SODA ASH() Specification : SODA ASH FOR EFFLUENT TREATMENT COMMERCIAL PURITY 97.5%. SPECIFICATION OFI/0061/SPN DT.11-12 97. R Estab
3) DEVELOPER FOR DEVELOPING X RAY FILM Description : DEVELOPER FOR DEVELOPING X RAY FILM() Specification : DEVELOPER FOR DEVELOPING X-RAY FILM R Estab
4) Ethyl Cellulose Description : Ethyl Cellulose() Specification : As per requirement R Estab
5) Iso-Propyl Alcohol Description : Iso-Propyl Alcohol() Specification : As per requirement R Estab
6) SODIUM SULPHATE ANHYDROUS TECH GR A Description : SODIUM SULPHATE ANHYDROUS TECH GR A() Specification : SODIUM SULPHATE ANHYDROUS TECH GR.ATO SPECN.NO.OFI/0015/SPN. DATED 17.06.1994. R Estab
7) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : JSS 6810-109:207 REV. NO-2 DC NO:3904-ME DT. 21/07/2010 R Estab
8) Potassium Nitrate Gr 1 Description : Potassium Nitrate Gr 1() Specification : IS-301:1982 2 REVISION REAFFIRED 2011 (D.S. CAT NO .6810- 000968 & 6810-001218) DC NO.3810-ME DT 05.05/2004 R Estab
9) Ethyl Acetate Description : Ethyl Acetate() Specification : As per requirement R Estab
10) OLEUM Description : OLEUM() Specification : OLEUM AS PER SPECN. OFI/0049/SPN DT 19/4/1995 AMENDMENT NO.3 DT.13.09.96, GRADE "A" R Estab
11) CALCIUM CARBONATE Description : CALCIUM CARBONATE() Specification : CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED . R Estab
12) Di-Phenyl Amine Description : Di-Phenyl Amine() Specification : As per requirement R Estab
13) ACETONE Description : ACETONE() Specification : IS-170-2004 FOURTH REVISION. REAFF. 2015. R Estab
Category : ddp
Grade : 1
Size : S
1Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) FIXING POWDER Description : FIXING POWDER() Specification : FIXING POWDER R Estab
2) SODA ASH Description : SODA ASH() Specification : SODA ASH FOR EFFLUENT TREATMENT COMMERCIAL PURITY 97.5%. SPECIFICATION OFI/0061/SPN DT.11-12 97. R Estab
3) DEVELOPER FOR DEVELOPING X RAY FILM Description : DEVELOPER FOR DEVELOPING X RAY FILM() Specification : DEVELOPER FOR DEVELOPING X-RAY FILM R Estab
4) Ethyl Cellulose Description : Ethyl Cellulose() Specification : As per requirement R Estab
5) Iso-Propyl Alcohol Description : Iso-Propyl Alcohol() Specification : As per requirement R Estab
6) SODIUM SULPHATE ANHYDROUS TECH GR A Description : SODIUM SULPHATE ANHYDROUS TECH GR A() Specification : SODIUM SULPHATE ANHYDROUS TECH GR.ATO SPECN.NO.OFI/0015/SPN. DATED 17.06.1994. R Estab
7) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : JSS 6810-109:207 REV. NO-2 DC NO:3904-ME DT. 21/07/2010 R Estab
8) Potassium Nitrate Gr 1 Description : Potassium Nitrate Gr 1() Specification : IS-301:1982 2 REVISION REAFFIRED 2011 (D.S. CAT NO .6810- 000968 & 6810-001218) DC NO.3810-ME DT 05.05/2004 R Estab
9) Ethyl Acetate Description : Ethyl Acetate() Specification : As per requirement R Estab
10) OLEUM Description : OLEUM() Specification : OLEUM AS PER SPECN. OFI/0049/SPN DT 19/4/1995 AMENDMENT NO.3 DT.13.09.96, GRADE "A" R Estab
11) CALCIUM CARBONATE Description : CALCIUM CARBONATE() Specification : CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED . R Estab
12) Di-Phenyl Amine Description : Di-Phenyl Amine() Specification : As per requirement R Estab
13) ACETONE Description : ACETONE() Specification : IS-170-2004 FOURTH REVISION. REAFF. 2015. R Estab
Category : ddp
Grade : 1
Size : S
1Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) X-RAY FILM ROLL, WIDTH-17"x 200 FEET LENGTH, FILM SPEED-100. Description : X-RAY FILM ROLL, WIDTH-17"x 200 FEET LENGTH, FILM SPEED-100.() Specification : X-RAY FILM ROLL, WIDTH-17 INCH x 200 FEET LENGTH, FILM SPEED-100. DIMENSION OF PAPER CYLINDER ON WHICH FILMS TO BE ROLLED ID - 77+/-2.0 MM, OD - 90.0 MM MAX., LENGTH - 430+/-10.0 MM AND OVERALL OD OF X-RAY FILM ROLL - 150 MM MAX. P Estab
2) X RAY FILM SHEET 30 CM X 40 CM Description : X RAY FILM SHEET 30 CM X 40 CM() Specification : X RAY FILM SHEET 30 CM X 40 CM INDUSTRIAL INTERLEAVED,100SPEED, HIGH CONTRAST, ASTM CL.2 TECHNICAL REQUIREMENTS - THE FILM WILL BE USED FOR X-RAYING OF VARIOUS TYPES OF FUZES LIKE FUZE PERCUSSION DA-5A, FUZE PERCUSSION 117 MK-20. FILM P Estab
3) X-RAY CHEMICALS COMPRISING OF AUTO PROCESSOR DEVELOPER AND AUTO PROCESSOR FIXER Description : X-RAY CHEMICALS COMPRISING OF AUTO PROCESSOR DEVELOPER AND AUTO PROCESSOR FIXER() Specification : X-RAY CHEMICALS COMPRISING OF AUTO PROCESSOR DEVELOPER AND AUTO PROCESSOR FIXER FOR INDUSTRIAL USE (TO BE SUPPLIED AS A SET FOR PREPARING HOMOGENOUS SOLUTION OF 20 LITRES DEVELOPER AND 25 LITRES FIXER AND DETAILS OF CONSTITUENTS TO BE P Estab
Category : s
Grade : 3
Size : S
103 UNIQUE TOOLS CO
12, Industrial Estate,Ambala City-134003 Industrial Estate Ambala Haryana
PIN1 : 134003
Phone No. : 9354709308
GSTIN : 06ADRPB0001E1ZE 		ADRPB0001E

Download 		1Vehicle Factory Jabalpur

Name Specification Use Status
1) PROPELLER SHAFT FOR MPV[90]() Specification : PROPELLER SHAFT ONE SET CONSISTING OF - 1. PROPELLER SHAFT (GB & AGB) -01 NO. DRG NO. 640-02-1350/A 2. PROPELLER SHAFT (FA & AGB) - 01 NOS, DRG NO. 640-02-1360/A. 3. PROPELLER SHAFT (RA & AGB) 01 NO., DRG NO. 640-02-1370/A C Nonestab
Category :
Grade : Grade III
Size : S
104 Shanthi Gears Ltd
304 A, Narayanasamy nagar, Singanallur road Coimbatore Tamil Nadu
PIN1 : 641005
Phone No. : 545745
GSTIN : 33AADCS0692L1Z7 		AADCS0692L

Download 		1Engine Factory Avadi

Name Specification Use Status
1) GEAR upto opn No 30 [20-06-135-2]() Specification : 20-05-135-2 C Estab
2) Water pump drive gear[3305-115-1]() Specification : 3305-115-1 C Estab
Category : p
Grade : Grade III
Size : L
105 Prakhyat Box Industries
14/76-A, Ist Floor, Civil Lines, Kanpur Uttar Pradesh
PIN1 : 208001
Phone No. : 0512-3237666, Mob. No.: 9935637095
GSTIN : 09AAMFP8119P1ZC 		AAMFP8119P

Download 		1Ordnance Equipment Factory

Name Specification Use Status
1) BOX CORRUGATED VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
Category : P
Grade : III
Size : S
106 LAXCON STEELS LTD.
Plot No. 235, Sarkhej Bavla Road, N.H.No.8-A, Village- Sari, Taluka Sanand, Ahmedabad Gujarat
PIN1 : 382220
Phone No. : 2717-305700
GSTIN : 24AAACL5064A1Z3 		AHML00104G

Download 		1Vehicle Factory Jabalpur

Name Specification Use Status
1) Bright Bars/Rods() As per specification/Drg. R Not established
2) Square & Hexagonal Bright Bars() As per specification/Drg. R Not established
3) Forged & Turned Round Bars() As per specification/Drg. R Not established
4) HRAP Flat Bars() As per specification/Drg. R Not established
5) Hot Rolled Cornered Squares() As per specification/Drg. R Not established
6) Hot Rolled Round Bars() As per specification/Drg. R Not established
7) Forging Quality Ingots() As per specification/Drg. R Not established
8) Steel Billets for Ammutim Steels() As per specification/Drg. R Not established
9) Continuos Cast Billets/Blooms (As per IS, BS, JIS, ASTM &DIN Specifications)() As per specification/Drg. R Not established
Category : P
Grade : II
Size : M
1Heavy Vehicle Factory

Name Specification Use Status
1) ROUND DIA 70x3000 MM LG ST, GR:38XC, GOST:4543-71, HOT ROLLED FORGEABLE QUALITY IN ANNEALED CONDITION() DRG.NO.GOST:4543-71 R Not Estab.
Category : P
Grade : II
Size : M
107 OPTICS & ALLIED ENGG. PVT. LTD.,
9Q, 1st Phase, Jigani Link Road, Bommasandra Industrial Area BANGALORE Karnataka
PIN1 : 560099
Phone No. : 41134421
GSTIN : 29AAACO1640F1ZQ 		BLRO00349G

Download 		1Opto Electronic Factory

Name Specification Use Status
1) LENS ASSY (LF-2690000008)[26]() Specification : AS PER DRAWING NO.AL5930056 C Nonestab
2) LENS ASSY (LF-2690000009)[26]() Specification : AS PER DRAWING NO. AL5930056-01 C Nonestab
3) LENS ASSY (LF-2690000042)[26]() Specification : AS PER DRAWING NO.BSH5930903 C Nonestab
4) LENS ASSY (LF-2690000043)[26]() Specification : AS PER DRAWING NO. BSH5930902 C Nonestab
5) LENS ASSY LF 2690000058[26]() Specification : LENS ASSY (FINISHED ) TO DRAWING NO. U-44.06.159 C Nonestab
Category : p
Grade : Grade III
Size : M
1Opto Electronic Factory

Name Specification Use Status
1) LENS ASSY (LF-2612817455)[26]() Specification : AS PER DRAWING NO. OLF/R&D/TVNE-4B & 1PA/182 C Nonestab
2) LENS ASSY(LF-2612817456)[26]() Specification : AS PER DRAWING NO.OLF/R&D/TVNE-4B &1PA/183 C Nonestab
3) LENS ASSY LF 2690000048[26]() Specification : LENS ASSY LF 2690000048 R Nonestab
4) CEMENTING LENS ASSY 2690000014[26]() Specification : CEMENTING LENS ASSY 2690000014 R Nonestab
Category : p
Grade : Grade III
Size : M
1Opto Electronic Factory

Name Specification Use Status
1) PROTECTIVE GLASS (LF-2612817442)[26]() Specification : AS PER DRAWING NO. U7168653 C Nonestab
2) PROTECTIVE GLASS FOR PZU-7 (LF-2612817444)[26]() Specification : AS PER DRAWING NO. U7197488 C Nonestab
Category :
Grade : Grade III
Size : M
1Opto Electronic Factory

Name Specification Use Status
1) PROTECTIVE GLASS LF 7440201390[74]() Specification : PROTECTIVE GLASS TO DRG. NO. BL4496030 C Nonestab
Category : p
Grade : Grade III
Size : M
1Opto Electronic Factory

Name Specification Use Status
1) FRONT THERMAL WINDOW COMMANDER'S CUPOLA(FINISHED) AS PER DRG NO 096700000000088 (LF 2690000164)[26]() Specification : FRONT THERMAL WINDOW COMMANDER'S CUPOLA(FINISHED) AS PER DRG NO 096700000000088 (LF 2690000164) C Nonestab
Category :
Grade : Grade III
Size : M
1Opto Electronic Factory

Name Specification Use Status
1) FRONT DAY WINDOW CUPOLA LF 2690000248[26]() Specification : FRONT DAY WINDOW AS PER DRG NO. 121020000000004 R Nonestab
Category :
Grade : Grade III
Size : M
1Opto Electronic Factory

Name Specification Use Status
1) HEAD MIRROR(THERMAL) FINISHED AS PE DRG NO 096702000000070 (LF 2690000165)[26]() Specification : HEAD MIRROR(THERMAL) FINISHED AS PE DRG NO 096702000000070 (LF 2690000165) C Nonestab
Category :
Grade : Grade III
Size : M
1Opto Electronic Factory

Name Specification Use Status
1) WEDGE F OPTICS LF 2690000246[26]() Specification : WEDGE AS PER DRG. NO. ODC-OLF/CTI T-72/MK-II/11 OF CTI MARK-II C Nonestab
Category :
Grade : Grade III
Size : M
1Opto Electronic Factory

Name Specification Use Status
1) DAY PRISM LF 2690000245[26]() Specification : DAY PRISM AS PER DRG. NO. 121020000000005 R Nonestab
Category :
Grade : Grade III
Size : M
1Opto Electronic Factory

Name Specification Use Status
1) PROTECTIVE GLASS (LF-2612817442)[26]() Specification : AS PER DRAWING NO. U7168653 C Nonestab
2) PROTECTIVE GLASS FOR PZU-7 (LF-2612817444)[26]() Specification : AS PER DRAWING NO. U7197488 C Nonestab
Category :
Grade : Grade III
Size : M
1Opto Electronic Factory

Name Specification Use Status
1) GE LENS FOR MRS[26]() Specification : MRS5000061 S Estab
Category :
Grade : Grade III
Size : M
1Opto Electronic Factory

Name Specification Use Status
1) NON PARABOLIC LENS LF 2612817440[26]() Specification : AS PER DRAWING NO. BSH7526010 C Nonestab
2) LENS FINISHED LF 7420400016[74]() Specification : DRG. NO. BSH7538010 C Nonestab
Category :
Grade : Grade III
Size : M
1Opto Electronic Factory

Name Specification Use Status
1) LENS ASSY TO DRG NO BSH5930313 LF 2612817439[26]() Specification : AS PER DRAWING NO BSH5930313 C Nonestab
Category :
Grade : Grade III
Size : M
1Opto Electronic Factory

Name Specification Use Status
1) LENS ASSY (LF-2690000028)[26]() Specification : AS PER DARWING NO. AF5938195 C Nonestab
2) LENS ASSY (LF-2690000029)[26]() Specification : AS PER DRAWING NO.AF5938196 C Nonestab
3) LENS ASSY (LF-2690000063)[26]() Specification : AS PER DRAWING NO.Y-4420969 C Nonestab
Category :
Grade : Grade III
Size : M
1Ordnance Factory Dehradun

Name Specification Use Status
1) LRF OPTICAL ASSEMBLY[74]() Specification : AS PER SPECIFICATION C Nonestab
Category : p
Grade : 3
Size : M
108 DYNAMIC ELECTRO MECHANICAL SYSTEMS
Plot No 46/West part, Road No No.2, Srinivasa Colony, jaipuri Colony, GSI,Bandlaguda, T.S -068 SRINIVASA COLONY Hyderabad Telangana
PIN1 : 500068
Phone No. : 9618973341
GSTIN : 36AANFD2991A1ZH 		AANFD2991A

Download 		1Opto Electronic Factory

Name Specification Use Status
1) 9001121305 VIDEO CABLE ASSY[90]() Specification : VIDEO CABLE ASSY FOR CTI-T-72 YO DRG. NO 096704000000000-01 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) CABLE NO 53 LF NO 7440300987[74]() Specification : CABLE NO.53 Drg No.ADSH4853013 CABLE NO.53 ADSH4853013 FOR PNK-4S C Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) SOCKET ASSY SH P 51 TO 7092322710[70]() Specification : SOCKET ASSY SH P-51 TO DRG. NO. 2BK.664.000CB C Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) DOUBLE WIRE LED LIGHT ASSY TO 6201070241[62]() Specification : DOUBLE WIRE LED LIGHT ASSY TO DRG NO. CQA(HV)5.70.136 C Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) CONTROL PANEL ASSEMBLY DRAWING TO 6206811186[62]() Specification : CONTROL PANEL ASSEMBLY DRAWING TO DRG NO. 902.02.000CB C Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) ELECTRO MAGNET ASSY TO 6206506001[62]() Specification : ELECTRO MAGNET ASSY TO DRG NO. 432.17.004CB-2 C Nonestab
Category :
Grade : Grade III
Size : S
109 SARTHAK PRINT SOFT PVT LTD
C 146 FFC OKHLA INDUSTRIAL AREA PHASE 3 NEW DELHI Delhi
PIN1 : 110020
Phone No. : 9810107575
GSTIN : 07AAJCS3353E1ZF 		ABKPS4892H

Download 		1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) Boxes Fibre Board Rigid Corrugated Triple Wall 7 Ply of Size 700mmx450mmx400mm[21]() Specification : CQA(GS)/US/460 R Estab
2) Corrugated Fibre Board Box 5 ply size 420x330x375 mm[14]() Specification : IS:2771 R Estab
Category :
Grade : Grade III
Size : S
110 ALLOYSMIN INDUSTRIES
K.D.-205, PITAM PURA NEW DELHI NEW DELHI
PIN1 : 110034
Phone No. : 011-27312799, 27317099, 09810050706, 9810422111
GSTIN : 07AAQPS7908D1ZA 		DELA13907F

Download 		1Field Gun Factory Kanpur

Name Specification Use Status
1) FERRO ALLOYS (AS A TRADER)() AS PER SPECIFICATION/REQUIREMENT E Estab.
2) MINERALS (AS A TRADER)() AS PER SPECIFICATION/REQUIREMENT E Estab.
3) METALS (AS A TRADER)() AS PER SPECIFICATION/REQUIREMENT E Estab.
4) CARBON PRODUCTS (AS A TRADER)() AS PER SPECIFICATION/REQUIREMENT E Estab.
Category : S
Grade : III
Size : S
111 VLS INDUSTIRES
135,Ground Floor, Ramdaspeth, Nagpur Jain Manidir Nagpur Maharashtra
PIN1 : 440010
Phone No. : 2442122
GSTIN : 27AMZPM1836H1ZH 		AMZPM1836H

Download 		1Ordnance Factory Chanda

Name Specification Use Status
1) 1020001090 BITUMEN PELLET TO DRG NO 155 1090[10]() Specification : BITUMEN PELLET AS PER DESIGNER'S REFERENCE 155-1090 FORPRODUCTION OF SHELL 155MM BB/BT. R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Bhandara

Name Specification Use Status
1) Wax Special No 6 Grade I[10]() Specification : White Colour To Specn.No.CS-5301-B R Nonestab
Category :
Grade : Grade III
Size : S
112 Mafatlal Industries Ltd,
Asarwa Road, Ahmedabad Gujarat
PIN1 : 380016
Phone No. : 079 22123940
GSTIN : 27AAACM2813L1ZI 		MUMM19025G

Download 		1Ordnance Clothing Factory Avadi

Name Specification Use Status
1) All types of Dyed/Undyed Drill fabrics() IS:177 R Non Established
2) Cotton Lining Cloth() IS:1535 R Non Established
3) Cloth Plain Weave PV Light Blue 148cms wide Excluding Selvedges() IAFS:01030 R Non Established
4) Cloth Plain Weave PV DD Darker OG 150cm wide() IND/TC/0048(d) R Non Established
5) Cloth PC Disruptive Pattern 250 GSM for Jungle with Army Logo 152 Cms. Wide. () PROV/OCFAV/FABRIC/001(a) R Non Established
6) Cloth Twill Weave PC (20:80) 250GSM Greenish Khaki 150cm width (min)() PROV/S/2599/TC-11/2009/02 R Non Established
7) Cloth PC 20:80 Army Logo 150cm wide() PROV/S/2599/TC-11/2009/03 R Non Established
8) Fabric Green 205 Gm. Spun PV Blended DD 148 Cms.() PROV/S/4369/FABRIC GREEN PV TC-11/2(a) R Non Established
9) Cloth Plain Weave Polyester Viscose Dope Dyed Dark Blue Grey 148 Cms() AIR HQ/DQAS/AC-053 R Non Established
10) Fabric Twill Weave Cotton & Polyester (80:20) Disruptive Pattern 250 GSM WR 150cms. Wide with Indian() PROV/S/2599/TC-11/2009/03 R Non Established
11) Cloth Twill Weave Polyester & Cotton (67:33) Disruptive Pattern 290 GSM WR () PROV/S/2599/TC-11/2009/01 R Non Established
12) Cloth Plain Weave Polyester Viscose Dope Dyed Khaki 138 Cms. Excluding Selvedge() IND/TC/0048(d) R Established
13) Cloth Calico Cotton White Bleached 91cm() IS:1544 R Non Established
14) Cloth PW PV Dope Dyed Light Blue 148cm () IAFS:01030 R Non Established
15) Cloth Twill Weave Mercerised Cotton Light OG 142cm() PROV/OCFAV/FABRIC/004 R Non Established
16) Cloth PC 67:33 blended for Parachute Type-II() IS:2970 R Non Established
Category : DP
Grade : I
Size : L
1Ordnance Clothing Factory Avadi

Name Specification Use Status
1) All types of Dyed/Undyed Drill fabrics[21]() Specification : IS:177 R Estab
2) Cotton Lining Cloth[21]() Specification : IS:1535 R Nonestab
3) Cloth Plain Weave PV Light Blue 148cms wide Excluding Selvedges[21]() Specification : IAFS:01030 R Nonestab
4) Cloth Plain Weave PV DD Darker OG 150cm wide[21]() Specification : IND/TC/0048(g) R Nonestab
5) Cloth PC Disruptive Pattern 250 GSM for Jungle with Army Logo 152 Cms. Wide. [21]() Specification : PROV/OCFAV/FABRIC/001(a) R Nonestab
6) Cloth Twill Weave PC (20:80) 250GSM Greenish Khaki 150cm width (min)[21]() Specification : PROV/S/2599/TC-11/2009/02 R Nonestab
7) Cloth PC 20:80 Army Logo 150cm wide[21]() Specification : PROV/S/2599/TC-11/2009/03 R Nonestab
8) Fabric Green 205 Gm. Spun PV Blended DD 148 Cms.[21]() Specification : PROV/S/4369/FABRIC GREEN PV TC-11/2(a) R Nonestab
9) Cloth Plain Weave Polyester Viscose Dope Dyed Dark Blue Grey 148 Cms[21]() Specification : AIR HQ/DQAS/AC-053 R Estab
10) Fabric Twill Weave Cotton & Polyester (80:20) Disruptive Pattern 250 GSM WR 150cms. Wide with Indian[21]() Specification : PROV/S/2599/TC-11/2009/03 R Nonestab
11) Cloth Twill Weave Polyester & Cotton (67:33) Disruptive Pattern 290 GSM WR [21]() Specification : PROV/S/2599/TC-11/2009/01 R Nonestab
12) Cloth Plain Weave Polyester Viscose Dope Dyed Khaki 138 Cms. Excluding Selvedge[21]() Specification : IND/TC/0048(f) R Estab
13) Cloth Calico Cotton White Bleached 91cm[21]() Specification : IS:1544 R Nonestab
14) Cloth PW PV Dope Dyed Light Blue 148cm [21]() Specification : IAFS:01030 R Nonestab
15) Cloth Twill Weave Mercerised Cotton Light OG 142cm[21]() Specification : PROV/OCFAV/FABRIC/004 R Nonestab
16) Cloth PC 67:33 blended for Parachute Type-II[21]() Specification : IS:2970 R Nonestab
17) CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CMS MINIMUM EXCLUDING SELVEDGES[21]() Specification : Specification No:PROV/OCFAV/FABRIC/005 R Nonestab
Category : DP
Grade : I
Size :
1Ordnance Parachute Factory

Name Specification Use Status
1) Cloth PV 410 grams RIP Stop OG WP 148 cms wide() As per specn R Estab.
2) Cloth Plain Weave PV Light Blue 148 cms wide (excluding selvedge)() As per specn R Estab.
3) Cloth Plain Weave PV DD Darker OG 150 cms wide() As per specn R Estab.
4) Cloth PC 67:33 Disrutive Pattern 150 cms width (min) with Indian Army Logo WR 290 gms() As per specn R Estab.
5) Cloth Twill Weave PC (20:80) 250 gms Greenish Khaki 150 cm width (min)() As per specn R Estab.
6) Cloth PC (20:80) Army Logo 150 cm wide() As per specn R Estab.
7) Fabric Green 205 gm Spun PV Blended DD 148 cms() As per specn R Estab.
8) Cloth Plain Weave PV DD Dark Blue Grey 148 cms() As per specn R Estab.
9) Fabric Twill Weave Cotton & Polyester (80:20) Disruptive Pattern 250 gms WR 150 cms with Indian Army() As per specn R Estab.
10) Cloth Twill Weave PC (67:33) Disrutive Pattern 290 gms WR 150 cms wide with Indian Army Logo() As per specn R Estab
Category : P
Grade : I
Size : L
1Ordnance Equipment Factory

Name Specification Use Status
1) CAMBRIC COTTON WHITE 91 CMS.() IND/TC/0015 (c) R
2) CANVAS COTTON 410 GMS. KHAKI 91 CMS.() IS: 1424-1983 V. N0. 4 R
3) CANVAS COTTON 410 GMS. O.G. WP 91 CMS.() IS: 1424-1983 (V.NO.4) AND WATER PROOFNESS TO IS: 6803-1972 R
4) CANVAS COTTON 545 GMS. SCOURED 91 CMS.() IS:1424 (VARIETY NO. 3) & MODIFICATION AS PER ANNX. "A" R
5) CANVAS COTTON 680 GM. O.G 91CM() IS: 1424 (VARIETY NO. 2) & IS:6803 FOR WTPRF. MODIFICATION AS PER ANNX "A" R
6) CANVAS COTTON 815 GMS O.G W.P. 91 CMS() IS: 1424-1983 (VARIETY NO.1) AND WATER PROOFNESS TO IS: 6803-1972 R
7) CLOTH CALICO COTTON KHAKI 91CM() IS: 1544-1973 (Ist REV.) (REAFFIRMED 1997) EDITION 2.3 R
8) CLOTH CALICO COTTON WHITE 91 CMS() IS: 5088-1982 (V.NO.3) R
9) CLOTH CALICO COTTON WHITE BLEACHED 91 CM.() IS: 1544-1973 (Ist REV.) (REAFF.1997), EDITION 2.3 (1993-02) R
10) CLOTH COTTON 375 GRM. SCOURED W.R. FOR CAPES 91 CMS. WIDE() IS: 2422-1985 (REAFFIRMED 1999) WITH AMENDMENT NO.1 OF AUG., 95 R
11) CLOTH COTTON CLOSELY WOVEN 170 GM WHITE WR 91 CM() AS PER REQUIREMENT & SPECIFICATION R
12) CLOTH COTTON CLOSELY WOVEN 170 GR. O.G. WR 91 CMS.() JSS: 8305-5-2000 VARIETY NO. "A" R
13) CLOTH COTTON CLOSELY WOVEN 235 GRMS. DUAL SHADE (WHITE/OG) W.R. 91 CMS() JSS: 8305-5-2000 (REV.NO. 1) VARIETY "B" R
14) CLOTH COTTON CLOSELY WOVEN 310 GM W.R. 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R
15) CLOTH COTTON DOSSUTI BLUE 91 CMS() IS: 179-1977 VARIETY NO. 4 R
16) CLOTH COTTON DOSSUTI KHAKI 91 CMS WIDE() IS: 179-1977 (REAFF. 1997) EDITION 3.5 (1998-05) V.NO.4 R
17) CLOTH COTTON DOSSUTI O.G. 91 CMS WIDE() IS: 179-1977 (V.NO.4) (REAFF. 1997) EDITION 3.5 (1998-05) R
18) CLOTH COTTON DOSSUTI SCOURED 91 CM.() IS: 179-1977 VARIETY NO. 4 R
19) CLOTH COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF 90 CM() IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST 95 (V.NO.1) R
20) CLOTH COTTON O.G. W.R.375 GR. FOR CAPES 76 CMS.() IS: 2422 & MODIFICATION AS PER ANNEX. "A" R
21) CLOTH COTTON OG WATER REPELENT FOR CAPES WATER PROOF 90 CM() IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 95 (V.NO.1) R
22) CLOTH COTTON SCOURED W.R. FOR CAPES. 76 CMS.() IS: 2422 & MODIFICATION AS PER ANNEX. A R
23) CLOTH DRILL COTTON DISRUPTIVE PATT VAT PRINTED 142 CMS WIDE() IND/TC/0044 (d) CONFORMING TO VARIETY NO. 3 R
24) CLOTH DRILL COTTON DISRUPTIVE PATTERN VAT. PRINTED 142 CMS WIDE V.NO.4.() AS PER REQUIREMENT & SPECIFICATION R
25) CLOTH DRILL COTTON O.G. 142 CMS.() IS: 177 V.NO.4 & REVISED SCHE. OF PARTICULAR AS PER ANNX. R
26) CLOTH DRILL COTTON O.G. 91 CMS WIDE PROOFED() IS: 5088 PT.-II LATEST R
27) CLOTH DRILL COTTON O.G. 142 CMS.() IS: 177-1989 (4th REVISION) REAFFIRMED 1997 V.NO. 3 R
28) CLOTH DRILL COTTON WHITE BLEACHED 142 CM V.NO 3() IS: 177-1989 V.NO.3 R
29) CLOTH DUCK COTTON 610 GR. SCOURED 91 CM. WIDE() IS: 1422-1983(V.NO.2) REAFF. 2000 WITH AMDT.NO.1 R
30) CLOTH DUCK COTTON 340 GMS O.G. 91 CMS.() IS: 1422 V.NO.4 & MODIFICATION AS PER ANNX. A R
31) CLOTH DUCK COTTON 340 GMS. O.G. WP 91 CMS() IS: 1422:1983 (V.NO.4) AND WATER PROOFNESS TO IS:6803-1972 R
32) CLOTH DUCK COTTON 340 GMS.SCOURED W.P. -- 91.4 CM.() IS: 1422-1983 VARIETY NO.4 IS;6803 LATEST FOR WATER PROOFNESS R
33) CLOTH DUCK COTTON 475 GMS. O.G. 91 CMS.() IS: 1422-1983 (V.NO.3) REAFFIRMED 2000 WITH AMDT.NO.1 OF APRIL R
34) CLOTH DUCK COTTON 475 GMS. SCOURED 91 CMS() IS: 1422-1983 V. NO 3 R
35) CLOTH DUCK COTTON 475 GMS SCOURED W.P. RP 91 CMS() IS: 1422-1983 V. NO 3 WATER PROOFNESS TO IS:6803 LATEST R
36) CLOTH PLAIN WEAVE POLYESTER & COTTON KHAKI 137 CM() OEFC/01/PCK/ 2003. R
37) CLOTH PLAIN WEAVE POLYESTER AND VISCOSE DOPE DYED KHAKI 138 CMS.() AS PER REQUIREMENT & SPECIFICATION R
38) COTTON FABRIC S.D. PARA SCOURED 91 CM() AS PER REQUIREMENT & SPECIFICATION R
39) COTTON FABRIC SCOURED FOR S.D. PARACHUTE TYPE-I 91 CMS.() IS: 2970-1987 (REAFF. 1999) (FIRST REV.) R
40) DRILL COTTON WHITE BLEACHED 91 CMS() IS: 177-1977 R
41) FABRIC 410 GMS OG WP P.V. DOPE DYED RIP STOP 148CMS() PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a) R
42) DRILL COTTON DISRUPTIVE PATTERN VAT PRINTED 91 CMS() IND/TC/0044 R
43) DRILL COTTON DISRUPTIVE VAT PRINTED 89.5 CMS.() IND/ME/975(PROV) R
44) CANVAS CLOTH JUTE SPC. GRADE B WP 91CM() IND/TC/2474 (C) (EXEMPTING THAT THERE WILL BE NOT PRESSURE) R
45) CLOTH CANVAS COTTON 545 GRMS. O.G W.P.91CM WIDE() IS:1424-1983 (V.NO.3) AND WATER PROOFNESS TO IS : 6803-1972 R
46) CLOTH CANVAS COTTON 680 GR. OG WP 91CM() IS: 1424-1983 (V.NO.2) REAFMD.1995 & WATERPROOFNESS TO IS:6803 R
47) CLOTH COTTON CLOSELY WOVEN 170 GMS SAND COLOUR W.R.91 CMS() JSS: 8305-5-2000 V.NO. "A" (SHADE NO. 388 OF IS:5) R Established
48) CLOTH DUCK COTTON 340 GMS SCOURED 91 CMS() IS: 1422-1983 (V.NO 4) REAFF. 2000 WITH AMDT.NO.1 OF APR, 87 R Established
49) CLOTH DUCK COTTON 475 GRM. BLACK W.P, R.P. (VAT DYED) 91 CMS.() IS: 1422-1983 V.NO.3 WATER PROOFNESS TO IS:6803 LATEST R Established
50) CLOTH DUCK COTTON 475 O.G W.P.AND RP 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
51) CLOTH DUCK COTTON 610 GMS DUAL SHADE (O.G./WHITE) WP RP 91 CMS.() IS: 1422-1983 V.NO. 2 R Established
52) CLOTH DUCK COTTON 610 GR. KHAKI W.P 76 CM WIDE() IS: 1422-1983(V.NO.2)(REAFF. 2000) WITH AMDT.NO.1 OF APRIL R Established
53) CLOTH DUCK COTTON 610 GR. SCOURED W.P. RP 91 CM WIDE() IS: 1422-1983 V. NO 2 WATER PROOFNESS TO IS:6803 LATEST R Established
54) CLOTH DUCK COTTON 745 GMS. O.G. W.P. 91 CMS.() IS: 1422-1983 (V.NO.1) AND WATER PROOFNESS TO IS:6803-1972 R Established
55) CLOTH DUCK O.G. RIP STOP, 50:50 POLYSTER:COTTON BLEND IN 700 GRM./SQ.MTR. WP RP 91 CMS. WIDE() SUPPLY BY DMSRDE R Established
56) CLOTH DUCK OG RIP STOP, 50:50 POLYSTER: COTTON BLEND, IN 400 GRM/SQ.MTR., WP RP 91 CMS. WIDE() SUPPLY BY DMSRDE R Established
57) CLOTH DUCK POLYESTER/COTTON BLENDED RIP STOP OG WP ROT PROOF 135 CM.() IS: 13510 -2000 VARIETY I(TABLE 1 OF CLAUSE 5.1) R Established
58) CLOTH DUCK POLYESTER/COTTON BLENDED RIP STOP OG WP ROT PROOF 91 CM.() IS:13510 -2000 VARIETY I(TABLE 1 OF CLAUSE 5.1) R Established
59) CLOTH DUCK POLYSTER COTTON RIP STOP 425 GMS. OG WP 135 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
60) CLOTH DUCK POLYSTER COTTON RIP STOP 425 GMS.O.G.91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
61) CLOTH DUCK POLYSTER/COTTON RIP STOP FABRIC (HEAVY) O.G. 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
62) CLOTH DUCK RIP STOP COTTON 610 GMS O.G. W.P. 135 CMS WIDE.() IND/TC/0145 R Established
63) CLOTH DUCK RIP STOP COTTON 610 GRM O.G. W.P.91 CM WIDE() IND/TC/0145 R Established
64) CLOTH FEARNAUGHT WHITE 140 CM() IND/TC/1187(C) R Established
65) CLOTH MAZARI LIGHT 142 CM() AS PER REQUIREMENT & SPECIFICATION R Established
66) CLOTH MUSLIN WHITE BLEACHED 91 CMS. WIDE() IND/TC/0002(j) R Established
67) CLOTH COTTON DOSUTIE GREEN 91 CMS WIDE() IS: 179-1977 V.NO. 4 REAFFIRMED 1997 EDITION 3.5 (1998-05) R Established
68) COTTON DOSUTI WHITE BLEACHED 91 CM.() IS: 1544-1973 (Ist REV.) (REAFF.1997), EDITION 2.3 (1993-02) R Established
69) DUCK COTTON 476 GMS SULPHAR KHAKI 91 CM() AS PER REQUIREMENT & SPECIFICATION R Established
70) DUCK COTTON 610 GMS O.G. W.P. 91 CMS() IS: 1422-1983 (V.NO.2), REAFF.2000 WITH AMDT.1 OF APR., 87, AMDT.2 R Established
71) DUCK POLYESTER/COTTON BLENDED RIP STOP OG WP 91 CMS. WIDE VARIETY NO. 1 VAT DISPERSE DYED() AS PER REQUIREMENT & SPECIFICATION R Established
72) DUCK POLYESTER/COTTON BLENDED, RIP STOP (MADE FROM - RING SPUN YARN) OGWP ROT PROOF, VARIETY NO.1, M() IS: 13510-2000 RING SPUN YARN (V. NO.1) MASS R Established
73) DUCK POLYESTER/COTTON BLENDED, RIP STOP (MADE FROM-RING SPUN YARN) OGWP ROT PROOF, VARIETY NO.1, MAS() IS: 13510-2000 RING SPUN YARN (V.NO. 1) MASS R Established
74) FABRIC COTTON 125 GSM SKY BLUE 155 CMS WIDE() AS PER TABLE-2 OF SPECN.NO. AIR HQ/JDQAS/OK-004 R Established
75) FABRIC COTTON 50 GM OG 100 CMS WIDE() DMSRDE/T&GS/97/415/TEX-4/3(b) R Established
76) FABRIC COTTON CLOSELY WOVEN 235 GR. BLACK WR 91 CM() JSS: 8305-5 R Established
77) FABRIC COTTON CLOSELY WOVEN 235 GRMS. BLACK 91CM WIDE,VATDYED() JSS: 8305-5 (APRIL, 80) EXCEPT THAT SHADE WHICH WILL BE BLACK R Established
78) FABRIC COTTON CLOSELY WOVEN 237 GRMS. BLACK 91 CMS WIDE() JSS: 8305-5 EXCEPT WL. SHADE WHICH SHALL BE BLACK R Established
79) FABRIC COTTON CLOSELY WOVEN 305 GRAM DUAL SHADE (WHITE/O.G.)W.R. 91 CM WIDE() IND/TC/0116(F) R Established
80) FABRIC COTTON MINERAL KHAKI WATER REPELLENT FOR CAPES WATER PROOF 76 CM() IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST 1995 VR.NO.1 R Established
81) FABRIC COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF, 135 CMS WIDE.() IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 1995 V.NO.1 R Established
82) FABRIC COTTON O.G.W.R. FOR CAPS WP 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
83) FABRIC COTTON O.G.WATER REPELLENT FOR CAPE WATER PROOF, 135 CMS WIDE.() IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 1995 V.NO.1 R Established
84) FABRIC COTTON OG WATER REPELLENT FOR CAPES WATER PROOF 76 CM() IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST 1995 VR.NO.1 R Established
85) FABRIC COTTON SCOURED SPECIAL CHEMICALLY WATER PROOF 91.4 CM() IS: 2422 VERIETY 4 R Established
86) FABRIC COTTON WHITE KNITTED 92 CMS.() IND/NAVY/TC/4273 ANNEX. A R Established
87) FABRIC GREEN 205 GMS SPUN P.V. BLENDED DOPE DYED 148 CMS.() PROV. SPECN. NO. PROV/S/4369/FABRIC GREEN PV/TC-11/2 (a) R Established
88) FABRIC NYLON 91CMS WIDE CAMAUFLAGING PRINTED WT/SQM 125 GRM.() IND/TC/3020 (a) FOR NYLON FABRIC AND DMSRDE/T&GS/89/377 (b) R Established
89) FABRIC NYLON 66 LT. WEIGHT 56 GSM +/- 5 % : BLUE SHADE() AS PER REQUIREMENT & SPECIFICATION R Established
90) FABRIC NYLON ASSORTED COLOUR FOR BAG SLEEPING() AS PER REQUIREMENT & SPECIFICATION R Established
91) FLANNELETTE LINING BROWN 142 + -1CM WIDE WITH FIRM SELVAGE() IS: 174-1983 (2ND REV.)REAFF. 2001 EXCEPT THAT FASTNESS TO R Established
92) FLAX/LINEN BASE FABRIC FOR BAG WATER CARRYING CANVAS 66 CMS WIDE() AS PER REQUIREMENT & SPECIFICATION R Established
93) LINING CLOTH POLYSTER 100% BLACK 110 CMS WIDE() AS PER REQUIREMENT & SPECIFICATION R Established
94) LINING CLOTH POLYSTER WHITE 100% 110 CMS() AS PER REQUIREMENT & SPECIFICATION R Established
95) LINING POLYSTER BROWN PRINTED 110CMS() AS PER REQUIREMENT & SPECIFICATION R Established
96) LONG CLOTH COTTON KHAKI 91 CM() IS: 187-1987 (V. NO.1) EXCEPT THAT (1) IN APPEARANCE SHADE R Established
97) LONG CLOTH COTTON WHITE BLEACHED 91 CMS() IS: 187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986 R Established
98) LONG CLOTH RED 91 CM WIDE() IS: 187-1987 (V.NO.01) R Established
99) LONG CLOTH YELLOW 91 CM WIDE() IS: 187-1987 (V.NO.01) R Established
100) LT. WT. FABRIC NYLON K37 GMS. O.G.() AS PER REQUIREMENT & SPECIFICATION R Established
101) NYLON CANVAS OG 220 GMS 100 CM WIDE() AS PER REQUIREMENT & SPECIFICATION R Established
102) NYLON CANVAS UNPROOFED 220 GMS/100 CM WIDE() DMSRDE/70/29 R Established
103) NYLON FABRIC 125 GMS. O.G. W.R. 91 CMS() IND/TC/3020 R Established
104) NYLON FABRIC 125 GMS. WHITE W.R. 91CM() AS PER REQUIREMENT & SPECIFICATION R Established
105) NYLON FABRIC 220 GMS O.G. 100 CM WIDE WATER & OIL REPELLENT() PROV.SPECIFICATION NO.DMSRDE/T&GS/96/431(B) R Established
106) PIECES OF 2.65 M X 0.27 M OF DUCK COTTON 475 GRAM. O.G.() AS PER REQUIREMENT & SPECIFICATION R Established
107) CLOTH COTTON CLOSELY WOVEN 170 GRM DUAL SHADE (OG/ WHITE) WR 91 CMS.() JSS: 8305-5-2000 (FIRST REVISION) R Established
Category : P
Grade : II
Size : L
1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) FABRIC BLENDED POLYESTER and COTTON 70 30 DIGITAL CAMOUFLAGE PRINT TWILL WEAVE 215G WIDTH 150cm min[21]() Specification : FABRIC BLENDED POLYESTER and COTTON 70 30 DIGITAL CAMOUFLAGE PRINT TWILL WEAVE 215G WIDTH 150cm min SPECIFICATION APPENDIX A provisional specification No S/2594/C/CCWDCP/TC 15(a) Pantone shade No of outer camouflage fabric 191015 TCX R Estab
2) fabric polyester plain weave 110g olive green width 150cm min[21]() Specification : fabric polyester plain weave 110g olive green width 150cm min Specification appendix D of provisional specification No S/2594/C/CCWDCP/TC-15(a) with pantone shade 19-5513 TPX R Estab
Category :
Grade : Grade III
Size : L
1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) Cloth Twill Weave PC (20:80) 250 GSM Greenish Khaki 150 cms width (min)[21]() Specification : PROV/S/2599/TC-11/2009/02 R Estab
2) Fabric twill weave Poly & Cotton (67:33) Dis. WR 290 GSM 150cm (Min) Width with Indian Army Logo[21]() Specification : No. PROV/S/2599/TC-11/2009/01, Except That Clause No. 6.1 & 6.2 Which shall be suitable yarn count may be used in warp & weft in 3/1 twill weave to meet the functional & other constructional parameter along with feel & Finish & Clause no.1 R Estab
3) Drill Cotton Proofed White (Bleached) 71 cm[21]() Specification : IND/TC/097 (c) R Estab
4) Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm Min Width[21]() Specification : Specification No.OCFAV/FABRIC/001(a) AS per relevant clause of specification R Estab
5) CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CM MIN[21]() Specification : NO. TS /10233/10234/TROUSER AND JACKET COMBAT 02062018 OCFAV/FABRIC/005 (CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CM MIN (EXCLUDING SELVEDGE) R Estab
Category : p
Grade : Grade III
Size : L
1Ordnance Parachute Factory

Name Specification Use Status
1) FABRIC NYLON 230 GMS UD 92 CMS[2101211991]() Specification : ADRDE/SPECN/1985/29(a) R Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Parachute Factory

Name Specification Use Status
1) FABRIC NYLON 48 +-2 GM ORANGE TWILL WEAVE 92 CM.[2101221969]() Specification : SPECIFICATION:- ADRDE/SPECN/2002/56(b)(VARIETY NO.-1) R Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Parachute Factory

Name Specification Use Status
1) FABRIC NYLON 42 GM LOW POROSITY RIP STOP WEAVE SKY BLUE 120 CM[2101221292]() Specification : ADRDE/SPECN/73(a) R Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Parachute Factory

Name Specification Use Status
1) FABRIC NYLON 48 + - 2 GMS U/D 95 CMS[2101221990]() Specification : SPECN:ADRDE/SPECN./2002/56(b)VARIETY NO.2 R Nonestab
2) FABRIC NYLON 48 + -2 GMS OG 95 CMS[2101221991]() Specification : SPECN:ADRDE/specn/2002/56(b) variety NO.2 R Nonestab
3) FABRIC NYLON 48 + -2 GMS ORANGE 95 CMS[2101221992]() Specification : SPECN:ADRDE/specn./2002/56(b) variety NO.2 R Nonestab
4) FABRIC NYLON 48 + - 2 GMS SAND 92 CMS[2101221993]() Specification : SPECN:ADRDE/specn/2002/56(b) variety NO.2 R Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Parachute Factory

Name Specification Use Status
1) Fabric Nylon 32gm U D 103 cm[2101221286]() Specification : ADRDE/QMS/TDTM/specn/95 with following Note :- Note (1) The Nylon multifilament yarn which is to be used to manufacture the fabric should have minimum Tenacity of 6.5 gms per denier. (2) There should be not be any type of yarn distorti R Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Parachute Factory

Name Specification Use Status
1) FABRIC NYLON LT WT 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 AS PER IS SPECN NO IS 5 1994 122 CM WIDTH[2101221981]() Specification : SPECN. NO. IS:4726-1984 Except that :-(i) Page 4, Clause 2.2.1, third line has been deleted from IS. (ii) Page 7, Table 1, Note 2 has been amended as given For - 210 g/cm2 R Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Parachute Factory

Name Specification Use Status
1) FABRIC NYLON 35 GM U/D WIDTH 94 CM[2101221355]() Specification : AS PER SPECIFICATION R Nonestab
2) FABRIC NYLON 35 GSM WIDTH 94 CM ORANGE[2101221356]() Specification : ADRDE/QMS/TDTM/SPECN/98. R Nonestab
3) FABRIC NYLON 35 GSM WIDTH 94 CM SAND COLOR[2101221357]() Specification : ADRDE/QMS/TDTM/SPECN/98. R Nonestab
4) FABRIC NYLON 35 GSM WIDTH 94 CM OG[2101221358]() Specification : ADRDE/QMS/TDTM/SPECN/98 R Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Parachute Factory

Name Specification Use Status
1) FABRIC NYLON POLYURETHENE COATED 105 GM WHITE WIDTH 100 CM DS Cat No 8305 003 728[2101221248]() Specification : SPECN NO.: JSS:8305-32:2003 R Nonestab
2) FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.[2101221592]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1982/7(c) sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S. R Nonestab
3) FABRIC NYLON 190 GSM UNDYED[2101222002]() Specification : ADRDE/QMS/TGTE/F/2019/03 Dated 16/05/2019 R Nonestab
4) FABRIC NYLON 32GM UD 107CM MIN WIDTH EXLUDING SELVEDGE[2101221287]() Specification : ADRDE/QMS/TDTM/SPECN/95 With following note:- (i) The nylon multifilament yarn which is to be used to manufacture the fabric should have a minimum tenacity of 6.5 gms per denier. (ii) There should not be any type of yarn distortion/yar R Nonestab
5) FABRIC NYLON LT WT 37g RIP STOP WEAVE OLIVE DRAB SHADE NO 298 AS PER SPECN NO IS 5 1994 94 CM WIDTH[2101221982]() Specification : SPECIFICATION NO. IS:4726-1984. EXCEPT THAT:- i) page 4, clause 2.2.1, third line has been deleted from IS. ii) page 7, table 1, note 2 has been amended as given FOR:- 210 g/sq.cm READ:- 200 g/sq.cm R Nonestab
6) FABRIC NYLON 66 90 3 gm UD[2101221365]() Specification : ADRDE/QMS/TDTM/F/2013/01 (a), dtd. 03.01.2020 R Nonestab
7) FABRIC NYLON 37 GM ORANGE[2101221999]() Specification : ADRDE/QAC/TECH PAR/03/45 DATE 28.01.2003 R Nonestab
8) FABRIC NYLON 32 GM UD RIP STOP[2101777051]() Specification : ADRDE/QMS/TDTM/F/2012/06 Dated-31, 05, 2012 Variety No. 1 R Nonestab
9) FABRIC NYLON 66 93 GM ORANGE SHADE ISC NO 592 AS PER IS 5 2007 WIDTH 100 CM[2101226096]() Specification : SPECN-ADRDE/SPECN/2000/53(c) 1-COLOUR FASTNESS TO LIGHT OF FINISHED FABRIC SHALL BE 5 OR BETTER WHEN TESTED AS PER IS:2454 2-COLOUR FASTNESS TO WASHING OF FINISHED FABRIC SHALL BE 4 OR BETTER WHEN TESTED AS PER TEST 1 IS:687. R Nonestab
10) FABRIC NYLON 58 GM UD 105 CM MIN WIDTH EXCLUDING SELVEDGE[2101221384]() Specification : SPECN NO. AS PER TECH. PARTICULARS (a) MASS/SQ MET : 58 GM (MAX) (b) BREAKING STRENGTH, BOTH WAYS : 60 KGF (MIN) (C) TEARING STRENGTH, BOTH WAYS : 1.7 KGF (MIN) (d) AIR POROSITY : 7-10 CU.FT/SQ.FT/SEC. (e) THICKNESS:0.11M, MAX AT A P R Nonestab
11) FABRIC NYLON 66 BREATHABLE POLYURETHANE COATED DISRUPTIVE ARMY CAMOUFLAGE PATTERN 180 CMS WIDE[2101221394]() Specification : As per Appendix: ‘A’ in specification No. PROV/S/3566/RAIN CAPE TC-15(d). R Nonestab
12) Fabric Nylon 66 48 GSM Undyed 95 Cm plus1 minus0[2101222000]() Specification : ADRDE/QMS/TDTM/F/2012/02 DATED 19 JAN 2012 and (i) The fabric shall have an initial spray rating of 80, 80, 70 minimum when tested as per AATCC 22 or equivalent test method. (ii) The manufacturer shall submit a certificate of complia R Nonestab
13) FABRIC NYLON 93 GM STEEL GREY WIDTH 95 CM[2101221318]() Specification : ADRDE/SPECN/2000/53(c) R Nonestab
14) FABRIC NYLON 45 GSM ZERO POROSITY SG[2101221457]() Specification : ADRDE/QMS/TGTE/F/2012/03/(a) DT.24.12.2020. R Nonestab
15) FABRIC NYLON 42 GSM LOW POROSITY STEEL GREY WITH 120 cm[2101221473]() Specification : ADRDE/SPECN/73(a) R Nonestab
Category :
Grade : Grade III
Size : L
113 WOLFRAM METCHEM PRIVATE LIMITED
43B HAZRA ROAD HAZRA ROAD KOLKATA West Bengal
PIN1 : 700019
Phone No. : 0332475388
GSTIN : 23AABCW5965A1ZJ 		CALW03841F

Download 		1Heavy Alloys Penetrator Project

Name Specification Use Status
1) TUNGSTEN POWDER AS PER CQAM58 SPECN AND MI G025[99]() Specification : As per MI R Nonestab
Category :
Grade : Grade III
Size : S
114 Devashi Polytex Pvt. Ltd.
Regd. Office: 6-A, Shivaji Marg, Moti Nagar, N. Delhi, Works: Plot No. 18, Udyog Kendra Extn. II, Echotech-3, Greater Noida New Delhi Delhi
PIN1 : 110015
Phone No. : 011-45088210, 9312213130
GSTIN : 09AACCD2958B1ZU 		AACCD2958B

Download 		1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) Batting Polyester 100 GSM 150 cm wide() As per Appendix-B of Prov. Specification No. IND/TC/4587 (c) except thickness parameter (SL. No. 3.1, at point 5) shall be 5 mm (Minimum) confirmed vide CQA (T&C) Kanpur FAX NO. S/3558/A/TC-15 Dated 28.05.2014 R Not Estab.
Category : DP
Grade : II
Size : S
115 RAPICUT CARBIDES LIMITED
PLOT NO 119, INDUSTRIAL ESTATE 119 GIDC Industrial estate, Ankleshwar ANKLESHWAR Gujarat
PIN1 : 393002
Phone No. : 251118
GSTIN : 24AAACR8753N1ZW 		AAACR8753N

Download 		1Heavy Alloys Penetrator Project

Name Specification Use Status
1) TUNGSTEN POWDER AS PER CQAM58 SPECN AND MI G025[99]() CQAM 58 R Nonestab
Category :
Grade : Grade III
Size : M
116 Premier Rubber Mills
Daultabad Road, Sector -104, Gurgaon, Haryana Daultabad Road, Sector -104, Gurgaon, Haryana Gurgaon Haryana
PIN1 : 122001
Phone No. : 2468878
GSTIN : 06AADFP9918R1ZE 		RTKP02062E

Download 		1Vehicle Factory Jabalpur

Name Specification Use Status
1) Rubber Bush[90]() Specification : As per specification / drg. C Nonestab
2) Rubber Packing for Bracket[90]() Specification : As per specification / drg. C Nonestab
3) Rubber Packing for Strap[90]() Specification : As per specification / drg. C Nonestab
4) Rubber Pad[90]() Specification : As per specification / drg. C Nonestab
5) Rubber Washer[90]() Specification : As per specification / drg. C Nonestab
Category :
Grade : Grade III
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) Rubber Sheet for BP SML L F no 9413100022000[90]() Specification : Specific Gravity 1.4 to 1.5 shore hardness 55-65. in black colour. R Nonestab
Category :
Grade : Grade III
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) Rubber Packing for Bracket Part No. -X-1200650[90]() Specification : As per specification / Drawings C Nonestab
2) Rubber pad-F2600650[90]() Specification : As per specification / Drawings C Nonestab
3) Rubber Bush[90]() Specification : As per specification / drg. C Nonestab
4) Rubber Packing for Strap[90]() Specification : As per specification / drg. C Nonestab
5) Rubber Washer[90]() Specification : As per specification / drg. C Nonestab
Category :
Grade : Grade III
Size : S
117 SHAH TOOL CENTRE
17/21, NAVA JEEVAN SOCIETY, LAMINGTON ROAD MUMBAI MAHARASHTRA
PIN1 : 400008
Phone No. : +919820655075 		AAAFS4505J

Download 		1Machine Tool Proto Type Factory

[ENR Registration]
Name Specification Use Status
1) 4194503301 INSERT TNMG 160408 5 TN 4000 Description : 4194503301 INSERT TNMG 160408 5 TN 4000() Specification : INSERT TNMG 160408 5 TN 4000 S Estab
2) 4194508221 MILLING INSERTS TPKN 2204 PDR Description : 4194508221 MILLING INSERTS TPKN 2204 PDR() Specification : MILLING INSERTS TPKN 2204 PDR S Estab
3) 1565012275 ADHESIVE PLASTIC TAPE 3 WIDTH Description : 1565012275 ADHESIVE PLASTIC TAPE 3 WIDTH() Specification : ADHESIVE PLASTIC TAPE 3" WIDTH P Estab
4) 4194759298 INSERT SCMT 09 T308 P40 Description : 4194759298 INSERT SCMT 09 T308 P40() Specification : INSERT SCMT 09 T308 P40 S Estab
5) 4195000062 GROOVING INSERTS 44 415 821 TTS Description : 4195000062 GROOVING INSERTS 44 415 821 TTS() Specification : GROOVING INSERTS 44-415-821 TTS S Estab
6) 7119016078 INSERT CCMT 09T308MT T5030 Description : 7119016078 INSERT CCMT 09T308MT T5030() Specification : INSERT CCMT 09T308MT T5030 S Estab
7) 7119099127 INSERT A4G0305M03U02GMPKC5010 Description : 7119099127 INSERT A4G0305M03U02GMPKC5010() Specification : INSERT A4G0305M03U02GMPKC5010 S Estab
8) 7119099280 CAPACITOR C9 10PF 100V Description : 7119099280 CAPACITOR C9 10PF 100V() Specification : CAPACITOR C9,10PF,100V. C Estab
9) 7119099281 CAPACITOR C8 470PF 50V Description : 7119099281 CAPACITOR C8 470PF 50V() Specification : CAPACITOR C8,470PF,50V. C Estab
10) 7119099284 CAPACITOR C7 100PF 100V Description : 7119099284 CAPACITOR C7 100PF 100V() Specification : CAPACITOR C7,100PF,100V. C Estab
11) 9911983453 INSERT VBMT 160404 PM 4025 Description : 9911983453 INSERT VBMT 160404 PM 4025() Specification : INSERT VBMT 160404 PM 4025. S Estab
12) 9911983669 INSERT TNMX 22 04 08 WF GC 4015 Description : 9911983669 INSERT TNMX 22 04 08 WF GC 4015() Specification : INSERT TNMX 22 04 08 WF GC 4015 S Estab
13) 9911983763 INSERT KNUX 16 04 05 R 11 GC 4025 Description : 9911983763 INSERT KNUX 16 04 05 R 11 GC 4025() Specification : INSERT KNUX 16 04 05 R 11 GC 4025 S Estab
14) 9999904779 CAPACITOR C6 3 3PF 100V MAKE AVX Description : 9999904779 CAPACITOR C6 3 3PF 100V MAKE AVX() Specification : CAPACITOR C6,3.3PF,100V.MAKE:AVX. C Estab
15) 9911984253 INSERT SNMG 120408 5 TN 4000 Description : 9911984253 INSERT SNMG 120408 5 TN 4000() Specification : INSERT SNMG 120408 5 TN 4000 S Estab
Category : s
Grade : 3
Size : S
118 ASSOCIATED TOOLS
PAKURIA, LAKSHMANPUR, CHAMRAIL, HOWRAH, WESTBENGAL
PIN1 : 711114
Phone No. : 033-26537298, 26530488 FAX: 033-26531361
GSTIN : 19AAFFA2081C1ZV 		CALA05913F

Download 		1Ordnance Factory Khamaria

Name Specification Use Status
1) AFT CLOSURE BLANK FOR HEAT-551 (9911357918)() DRG.NO. 4103408/DRG.NO. TRD-2-2-2294 C NOT ESTABLISHED
Category : P
Grade : III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) MAGAZINE SUB ASSEMBLY WITHOUT NICKEL PLATING TO GSF DRG.NO.CTM-0031 (PB-46) DT:-21.03.93. IN FINISHED CONDITION[70]() Specification : MAGAZINE SUB ASSEMBLY WITHOUT NICKEL PLATING TO GSF DRG.NO.CTM-0031 (PB-46) DT:-21.03.93. IN FINISHED CONDITION C Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) RECEIVER CTM 0178 1 TO CTM 0178 2[70]() Specification : RECEIVER IN F/C AS PER DRG NO. CTM 0178/1 TO 0178/2 C Nonestab
2) MAGAZINE SUB ASSY CTM 0175[70]() Specification : MAGAZINE SUB ASSY IN F/C AS PER DRG DRG NO CTM-0175 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) MAGAZINE SUB ASSY. TO DRG. NO. CTM-0112 IN F/C[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) SLIDE IN FC WITHOUT NICKEL PLATING TO DRG NO M 8196C for 0 POINT 32 Pistol[70]() Specification : SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol C Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) SLIDE FOR ASHANI MK 1M CTM 179 WITHOUT PLATING[70]() Specification : AS PER DRAWING C Nonestab
2) MAGAZINE ASSY FOR ASHANI MK III IN FC AS PER DRG NO CTM 158 C[70]() Specification : MAGAZINE ASSY. FOR ASHANI MK-III IN F/C AS PER DRG NO:- CTM-158 C C Nonestab
3) SLIDE TO DRG NO CTM 166[70]() Specification : SLIDE TO DRG NO CTM-166 FOR ASHNI MK-III IN F/C C Nonestab
4) RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A[70]() Specification : RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A C Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6[70]() Specification : AS PER DRAWING C Nonestab
2) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
119 SVR ENGINEERING WORKS
PLOT NO. B9/1, NEAR SANTHOSHIMATHA TEMPLE, IDA, PATANCHERU, MEDAK DISTRICT, TELANGANA
PIN1 : 502319
Phone No. : 08455-241551 FAX: 08455-241550
GSTIN : 36AARFS3021L1ZW 		HYDS31748D

Download 		1Ordnance Factory Khamaria

Name Specification Use Status
1) ADOPTER BUSH FOR 81 MM SMOKE GRENADE (9911358269)() ADOPTER BUSH TO DRG.NO. 4-26941-007 DC NO. 35878 C NOT ESTABLISHED
Category : P
Grade : III
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) UNION BULK HEAD (FOR MPV)[90]() Specification : UNION BULK HEAD DRG NO. 620-05-2001-1/A C Estab
2) BOLT DRAIN BUSH[90]() Specification : BOLT (DRAIN BUSH) DRG NO. OFPM 709-12-302-A C Estab
3) TORSION BAR[90]() Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C C Estab
4) HINGE ASSY LOAD BODY LADDER[90]() Specification : HINGE ASSY LOAD BODY (LADDER) HINGE ASSY LOAD BODY DRG.NO.VFJ/17/09/00004 C Nonestab
5) BOSS M6X12X30 OST 3[90]() Specification : BOSS M6X12X30 OST 3-1496-72 C Estab
6) BOSS M6X12X36 OST 3 1496 72[90]() Specification : BOSS M6X12X36 OST 3-1496-72 C Estab
7) BOSS M8X16X8 OST 3 1496 72[90]() Specification : BOSS M8X16X8 OST 3-1496-72 C Estab
8) THREADED BOSS[90]() Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8 C Estab
9) THREADED BOSS M12X 1 point 75 X OD 20X60 MM[90]() Specification : THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S. C Estab
10) THREADED BOSS M8 X 16MM OD X12MM[90]() Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH C Estab
11) THREADED BOSS M8 X 16MM OD X25MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH C Estab
12) THREADED BOSS M12 X 20MM OD X30MM[90]() Specification : THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7 C Estab
13) THREADED BOSS M8 X 16MM OD X40MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8 C Estab
14) THREADED BOSS M10 X 20MM OD X 30MM[90]() Specification : THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9 C Estab
15) BOSS M12 X 25L[90]() Specification : BOSS M12 X 25L DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B C Estab
16) ELECTRICAL BOSSES FOR MPV ARMY 13 TYPES[90]() Specification : ELECTRICAL BOSSES FOR MPV(ARMY)(13 TYPES) C Nonestab
17) RETAINER[90]() Specification : RETAINER DRG NO. 765-69-49/B C Nonestab
18) TORSION BAR 765 58 191[90]() Specification : TORSION BAR DRG NO 765-58-191 C Estab
19) Torsion Bar Gost Std Wire[90]() Specification : Torsion Bar Gost Std./Wire Drg. No. 675-58-74/A C Estab
20) Bush Gost Std Bar Drg No 765 58 312 A[90]() Specification : Bush Gost Std./ Bar Drg No 765-58-312/A C Estab
21) BONNET LIFTING HOOK[90]() Specification : BONNET LIFTING HOOK DRG. NO. 620-01-1912-1/A , MATERIAL BRIGHTER IS:9550-80 C Nonestab
22) SHAFT 765 69 46 A[90]() Specification : SHAFT DRG. NO. 765-69-46/A C Nonestab
23) BUSH[90]() Specification : BUSH DRG. NO. 673-50-144/A C Nonestab
24) STRUT 765 50 1677 A[90]() Specification : STRUT DRG. NO. 765-50-1677/A C Estab
25) STRUT 765 50 1353 A[90]() Specification : STRUT DRG. NO. 765-50-1353/A C Estab
26) HEX BOLT M 20 120 MPV[90]() Specification : HEX BOLT M20X120 TO IS:1364 FOR MPV GRADE 8.8 C Nonestab
27) BOSS BUMPER ASSEMBLY[90]() Specification : BOSS (BUMPER ASSEMBLY) DRG. NO. OFPM 640-01-3135-1 C Nonestab
28) BUSH RR DOOR LOCK[90]() Specification : BUSH (RR DOOR LOCK) TO DRG. NO. 640-01-4117-1, MATERIAL GR 42 CR4M02, IS:5517 C Nonestab
29) HANDLE LEVER 765 58 221 C[90]() Specification : HANDLE LEVER DRG. NO. 765-58-221/C C Estab
30) UPPER STEEL ROD 645 01 1321 1[90]() Specification : UPPER STEEL ROD AS PER DRG. NO.645-01-1321-1,MATERIAL STEEL BAR C Nonestab
31) BUSH DRG NO 610 11 1031 1 A[90]() Specification : BUSH DRG.NO. 610-11-1031-1/A C Nonestab
32) BOSS M12 X24 OD X 25 L[90]() Specification : BOSS M12 X24 (OD) X 25 L R Estab
33) BOSS M12 X 20 OD X 30L[90]() Specification : BOSS M12 X 20 (OD)X 30L C Estab
34) BOSS M12 X 20 OD X 65L[90]() Specification : BOSS M12 X 20(OD)X 65L C Estab
35) STEEL BLOCK SIZE 65X40X55 MM ST42 IS 1079[90]() Specification : STEEL BLOCK SIZE 65X40X55 MM ST-42-IS:1079 DRG. 645-01-7315-1/B FOR FINISH COMPONENT R Nonestab
36) SPRING WASHER DIA 6 IS 6735[90]() Specification : SPRING WASHER DIA 6 IS:6735 C Nonestab
37) AXLE GOST STD OBLIQUE BAR[90]() Specification : AXLE GOST STD./ BAR C Nonestab
38) HOOK PART NO 675 57271 A[90]() Specification : HOOK PART NO 675-57-271/A C Nonestab
39) WASHER SEAT BASE ASSY[90]() Specification : WASHER SEAT BASE ASSY C Nonestab
40) BOSS BRIGHT BAR DRG 620 01 1913 1 A[90]() Specification : BOSS BRIGHT BAR IS:9550-80 DRG 620-01-1913-1/A C Nonestab
Category : p
Grade : Grade III
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) UNION BULK HEAD (FOR MPV)[90]() Specification : UNION BULK HEAD DRG NO. 620-05-2001-1/A R Estab
2) BOLT DRAIN BUSH[90]() Specification : BOLT (DRAIN BUSH) DRG NO. OFPM 709-12-302-A C Estab
3) TORSION BAR[90]() Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C C Estab
4) HINGE ASSY LOAD BODY LADDER[90]() Specification : HINGE ASSY LOAD BODY (LADDER) HINGE ASSY LOAD BODY DRG.NO.VFJ/17/09/00004 C Nonestab
5) BOSS M6X12X30 OST 3[90]() Specification : BOSS M6X12X30 OST 3-1496-72 C Estab
6) BOSS M6X12X36 OST 3 1496 72[90]() Specification : BOSS M6X12X36 OST 3-1496-72 C Estab
7) BOSS M8X16X8 OST 3 1496 72[90]() Specification : BOSS M8X16X8 OST 3-1496-72 C Estab
8) THREADED BOSS[90]() Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8 C Estab
9) THREADED BOSS M12X 1 point 75 X OD 20X60 MM[90]() Specification : THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S. C Estab
10) THREADED BOSS M8 X 16MM OD X12MM[90]() Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH C Estab
11) THREADED BOSS M8 X 16MM OD X25MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH C Estab
12) THREADED BOSS M12 X 20MM OD X30MM[90]() Specification : THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7 C Estab
13) THREADED BOSS M8 X 16MM OD X40MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8 C Estab
14) THREADED BOSS M10 X 20MM OD X 30MM[90]() Specification : THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9 C Estab
15) BOSS M12 X 25L[90]() Specification : BOSS M12 X 25L DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B C Estab
16) ELECTRICAL BOSSES FOR MPV ARMY 13 TYPES[90]() Specification : ELECTRICAL BOSSES FOR MPV(ARMY)(13 TYPES) C Nonestab
17) RETAINER[90]() Specification : RETAINER DRG NO. 765-69-49/B C Nonestab
18) TORSION BAR 765 58 191[90]() Specification : TORSION BAR DRG NO 765-58-191 C Estab
19) Torsion Bar Gost Std Wire[90]() Specification : Torsion Bar Gost Std./Wire Drg. No. 675-58-74/A C Estab
20) Bush Gost Std Bar Drg No 765 58 312 A[90]() Specification : Bush Gost Std./ Bar Drg No 765-58-312/A C Estab
21) BONNET LIFTING HOOK[90]() Specification : BONNET LIFTING HOOK DRG. NO. 620-01-1912-1/A , MATERIAL BRIGHTER IS:9550-80 C Nonestab
22) SHAFT 765 69 46 A[90]() Specification : SHAFT DRG. NO. 765-69-46/A C Nonestab
23) BUSH[90]() Specification : BUSH DRG. NO. 673-50-144/A C Nonestab
24) STRUT 765 50 1677 A[90]() Specification : STRUT DRG. NO. 765-50-1677/A C Estab
25) STRUT 765 50 1353 A[90]() Specification : STRUT DRG. NO. 765-50-1353/A C Estab
26) HEX BOLT M 20 120 MPV[90]() Specification : HEX BOLT M20X120 TO IS:1364 FOR MPV GRADE 8.8 C Nonestab
27) BOSS BUMPER ASSEMBLY[90]() Specification : BOSS (BUMPER ASSEMBLY) DRG. NO. OFPM 640-01-3135-1 C Nonestab
28) BUSH RR DOOR LOCK[90]() Specification : BUSH (RR DOOR LOCK) TO DRG. NO. 640-01-4117-1, MATERIAL GR 42 CR4M02, IS:5517 C Nonestab
29) HANDLE LEVER 765 58 221 C[90]() Specification : HANDLE LEVER DRG. NO. 765-58-221/C C Estab
30) UPPER STEEL ROD 645 01 1321 1[90]() Specification : UPPER STEEL ROD AS PER DRG. NO.645-01-1321-1,MATERIAL STEEL BAR C Nonestab
31) BUSH DRG NO 610 11 1031 1 A[90]() Specification : BUSH DRG.NO. 610-11-1031-1/A C Nonestab
32) BOSS M12 X24 OD X 25 L[90]() Specification : BOSS M12 X24 (OD) X 25 L R Estab
33) BOSS M12 X 20 OD X 30L[90]() Specification : BOSS M12 X 20 (OD)X 30L R Estab
34) BOSS M12 X 20 OD X 65L[90]() Specification : BOSS M12 X 20(OD)X 65L C Estab
35) STEEL BLOCK SIZE 65X40X55 MM ST42 IS 1079[90]() Specification : STEEL BLOCK SIZE 65X40X55 MM ST-42-IS:1079 DRG. 645-01-7315-1/B FOR FINISH COMPONENT R Estab
36) SPRING WASHER DIA 6 IS 6735[90]() Specification : SPRING WASHER DIA 6 IS:6735 C Nonestab
37) AXLE GOST STD OBLIQUE BAR[90]() Specification : AXLE GOST STD./ BAR C Nonestab
38) HOOK PART NO 675 57271 A[90]() Specification : HOOK PART NO 675-57-271/A C Estab
39) WASHER SEAT BASE ASSY[90]() Specification : WASHER SEAT BASE ASSY C Nonestab
40) BOSS BRIGHT BAR DRG 620 01 1913 1 A[90]() Specification : BOSS BRIGHT BAR IS:9550-80 DRG 620-01-1913-1/A C Nonestab
41) CASTING FOR BLANK UPPER RACE RING[90]() Specification : CASTING FOR BLANK UPPER RACE RING C Estab
42) CASTING FOR LOWER RACE RING[90]() Specification : CASTING FOR LOWER RACE RING C Estab
43) TORSION BAR LH[90]() Specification : TORSION BAR LH C Nonestab
44) TORSION BAR RH[90]() Specification : TORSION BAR RH C Nonestab
45) U BOLT FRONT SPRING[90]() Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A C Nonestab
46) U BOLT REAR SPRING[90]() Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I] C Nonestab
47) WHEEL SCOTCHE[90]() Specification : WHEEL SCOTCHE WHEEL SCOTCHE DRG./PART NO.X-4700314-B C Nonestab
Category : p
Grade : Grade III
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) UNION BULK HEAD (FOR MPV)[90]() Specification : UNION BULK HEAD DRG NO. 620-05-2001-1/A R Nonestab
2) BOLT DRAIN BUSH[90]() Specification : BOLT (DRAIN BUSH) DRG NO. OFPM 709-12-302-A C Nonestab
3) TORSION BAR[90]() Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C C Nonestab
4) HINGE ASSY LOAD BODY LADDER[90]() Specification : HINGE ASSY LOAD BODY (LADDER) HINGE ASSY LOAD BODY DRG.NO.VFJ/17/09/00004 C Nonestab
5) BOSS M6X12X30 OST 3[90]() Specification : BOSS M6X12X30 OST 3-1496-72 C Estab
6) BOSS M6X12X36 OST 3 1496 72[90]() Specification : BOSS M6X12X36 OST 3-1496-72 C Estab
7) BOSS M8X16X8 OST 3 1496 72[90]() Specification : BOSS M8X16X8 OST 3-1496-72 C Estab
8) THREADED BOSS[90]() Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8 C Estab
9) THREADED BOSS M12X 1 point 75 X OD 20X60 MM[90]() Specification : THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S. C Estab
10) THREADED BOSS M8 X 16MM OD X12MM[90]() Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH C Estab
11) THREADED BOSS M8 X 16MM OD X25MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH C Estab
12) THREADED BOSS M12 X 20MM OD X30MM[90]() Specification : THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7 C Estab
13) THREADED BOSS M8 X 16MM OD X40MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8 C Estab
14) THREADED BOSS M10 X 20MM OD X 30MM[90]() Specification : THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9 C Estab
15) BOSS M12 X 25L[90]() Specification : BOSS M12 X 25L DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B C Estab
16) ELECTRICAL BOSSES FOR MPV ARMY 13 TYPES[90]() Specification : ELECTRICAL BOSSES FOR MPV(ARMY)(13 TYPES) C Nonestab
17) RETAINER[90]() Specification : RETAINER DRG NO. 765-69-49/B C Nonestab
18) TORSION BAR 765 58 191[90]() Specification : TORSION BAR DRG NO 765-58-191 C Nonestab
19) Torsion Bar Gost Std Wire[90]() Specification : Torsion Bar Gost Std./Wire Drg. No. 675-58-74/A C Nonestab
20) Bush Gost Std Bar Drg No 765 58 312 A[90]() Specification : Bush Gost Std./ Bar Drg No 765-58-312/A C Nonestab
21) BONNET LIFTING HOOK[90]() Specification : BONNET LIFTING HOOK DRG. NO. 620-01-1912-1/A , MATERIAL BRIGHTER IS:9550-80 C Nonestab
22) SHAFT 765 69 46 A[90]() Specification : SHAFT DRG. NO. 765-69-46/A C Nonestab
23) BUSH[90]() Specification : BUSH DRG. NO. 673-50-144/A C Nonestab
24) STRUT 765 50 1677 A[90]() Specification : STRUT DRG. NO. 765-50-1677/A C Estab
25) STRUT 765 50 1353 A[90]() Specification : STRUT DRG. NO. 765-50-1353/A C Estab
26) HEX BOLT M 20 120 MPV[90]() Specification : HEX BOLT M20X120 TO IS:1364 FOR MPV GRADE 8.8 C Nonestab
27) BOSS BUMPER ASSEMBLY[90]() Specification : BOSS (BUMPER ASSEMBLY) DRG. NO. OFPM 640-01-3135-1 C Nonestab
28) BUSH RR DOOR LOCK[90]() Specification : BUSH (RR DOOR LOCK) TO DRG. NO. 640-01-4117-1, MATERIAL GR 42 CR4M02, IS:5517 C Nonestab
29) HANDLE LEVER 765 58 221 C[90]() Specification : HANDLE LEVER DRG. NO. 765-58-221/C C Nonestab
30) UPPER STEEL ROD 645 01 1321 1[90]() Specification : UPPER STEEL ROD AS PER DRG. NO.645-01-1321-1,MATERIAL STEEL BAR C Nonestab
31) BUSH DRG NO 610 11 1031 1 A[90]() Specification : BUSH DRG.NO. 610-11-1031-1/A C Nonestab
32) BOSS M12 X24 OD X 25 L[90]() Specification : BOSS M12 X24 (OD) X 25 L R Estab
33) BOSS M12 X 20 OD X 30L[90]() Specification : BOSS M12 X 20 (OD)X 30L R Estab
34) BOSS M12 X 20 OD X 65L[90]() Specification : BOSS M12 X 20(OD)X 65L C Estab
35) STEEL BLOCK SIZE 65X40X55 MM ST42 IS 1079[90]() Specification : STEEL BLOCK SIZE 65X40X55 MM ST-42-IS:1079 DRG. 645-01-7315-1/B FOR FINISH COMPONENT R Nonestab
36) SPRING WASHER DIA 6 IS 6735[90]() Specification : SPRING WASHER DIA 6 IS:6735 C Nonestab
37) AXLE GOST STD OBLIQUE BAR[90]() Specification : AXLE GOST STD./ BAR C Nonestab
38) HOOK PART NO 675 57271 A[90]() Specification : HOOK PART NO 675-57-271/A C Nonestab
39) WASHER SEAT BASE ASSY[90]() Specification : WASHER SEAT BASE ASSY C Nonestab
40) BOSS BRIGHT BAR DRG 620 01 1913 1 A[90]() Specification : BOSS BRIGHT BAR IS:9550-80 DRG 620-01-1913-1/A C Nonestab
41) CASTING FOR BLANK UPPER RACE RING[90]() Specification : CASTING FOR BLANK UPPER RACE RING C Estab
42) CASTING FOR LOWER RACE RING[90]() Specification : CASTING FOR LOWER RACE RING C Estab
43) TORSION BAR LH[90]() Specification : TORSION BAR LH C Nonestab
44) TORSION BAR RH[90]() Specification : TORSION BAR RH C Nonestab
45) U BOLT FRONT SPRING[90]() Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A C Nonestab
46) U BOLT REAR SPRING[90]() Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I] C Nonestab
47) WHEEL SCOTCHE[90]() Specification : WHEEL SCOTCHE WHEEL SCOTCHE DRG./PART NO.X-4700314-B C Nonestab
48) HINGE 765 50 2448[90]() Specification : HINGE DRG. NO. 765-50-2448/A C Estab
49) BRACKET FUEL TANK BRACKET[90]() Specification : BRACKET-FUEL TANK BRACKET P.NO. X7184610-B.1 C Nonestab
50) SUB ASSY OF DIPSTICK[90]() Specification : S/A OF DIPSTICK, PART NO. B5028203#.1 C Nonestab
Category : p
Grade : Grade III
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) UNION BULK HEAD (FOR MPV)[90]() Specification : UNION BULK HEAD DRG NO. 620-05-2001-1/A R Estab
2) BOLT DRAIN BUSH[90]() Specification : BOLT (DRAIN BUSH) DRG NO. OFPM 709-12-302-A C Estab
3) TORSION BAR[90]() Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C C Estab
4) HINGE ASSY LOAD BODY LADDER[90]() Specification : HINGE ASSY LOAD BODY (LADDER) HINGE ASSY LOAD BODY DRG.NO.VFJ/17/09/00004 C Nonestab
5) BOSS M6X12X30 OST 3[90]() Specification : BOSS M6X12X30 OST 3-1496-72 C Nonestab
6) BOSS M6X12X36 OST 3 1496 72[90]() Specification : BOSS M6X12X36 OST 3-1496-72 C Nonestab
7) BOSS M8X16X8 OST 3 1496 72[90]() Specification : BOSS M8X16X8 OST 3-1496-72 C Nonestab
8) THREADED BOSS[90]() Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8 C Nonestab
9) THREADED BOSS M12X 1 point 75 X OD 20X60 MM[90]() Specification : THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S. C Nonestab
10) THREADED BOSS M8 X 16MM OD X12MM[90]() Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH C Nonestab
11) THREADED BOSS M8 X 16MM OD X25MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH C Nonestab
12) THREADED BOSS M12 X 20MM OD X30MM[90]() Specification : THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7 C Nonestab
13) THREADED BOSS M8 X 16MM OD X40MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8 C Nonestab
14) THREADED BOSS M10 X 20MM OD X 30MM[90]() Specification : THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9 C Nonestab
15) BOSS M12 X 25L[90]() Specification : BOSS M12 X 25L DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B C Nonestab
16) ELECTRICAL BOSSES FOR MPV ARMY 13 TYPES[90]() Specification : ELECTRICAL BOSSES FOR MPV(ARMY)(13 TYPES) C Nonestab
17) RETAINER[90]() Specification : RETAINER DRG NO. 765-69-49/B C Nonestab
18) TORSION BAR 765 58 191[90]() Specification : TORSION BAR DRG NO 765-58-191 C Estab
19) Torsion Bar Gost Std Wire[90]() Specification : Torsion Bar Gost Std./Wire Drg. No. 675-58-74/A C Estab
20) Bush Gost Std Bar Drg No 765 58 312 A[90]() Specification : Bush Gost Std./ Bar Drg No 765-58-312/A C Estab
21) BONNET LIFTING HOOK[90]() Specification : BONNET LIFTING HOOK DRG. NO. 620-01-1912-1/A , MATERIAL BRIGHTER IS:9550-80 C Nonestab
22) SHAFT 765 69 46 A[90]() Specification : SHAFT DRG. NO. 765-69-46/A C Nonestab
23) BUSH[90]() Specification : BUSH DRG. NO. 673-50-144/A C Nonestab
24) STRUT 765 50 1677 A[90]() Specification : STRUT DRG. NO. 765-50-1677/A C Nonestab
25) STRUT 765 50 1353 A[90]() Specification : STRUT DRG. NO. 765-50-1353/A C Nonestab
26) HEX BOLT M 20 120 MPV[90]() Specification : HEX BOLT M20X120 TO IS:1364 FOR MPV GRADE 8.8 C Nonestab
27) BOSS BUMPER ASSEMBLY[90]() Specification : BOSS (BUMPER ASSEMBLY) DRG. NO. OFPM 640-01-3135-1 C Nonestab
28) BUSH RR DOOR LOCK[90]() Specification : BUSH (RR DOOR LOCK) TO DRG. NO. 640-01-4117-1, MATERIAL GR 42 CR4M02, IS:5517 C Nonestab
29) HANDLE LEVER 765 58 221 C[90]() Specification : HANDLE LEVER DRG. NO. 765-58-221/C C Estab
30) UPPER STEEL ROD 645 01 1321 1[90]() Specification : UPPER STEEL ROD AS PER DRG. NO.645-01-1321-1,MATERIAL STEEL BAR C Nonestab
31) BUSH DRG NO 610 11 1031 1 A[90]() Specification : BUSH DRG.NO. 610-11-1031-1/A C Nonestab
32) BOSS M12 X24 OD X 25 L[90]() Specification : BOSS M12 X24 (OD) X 25 L R Nonestab
33) BOSS M12 X 20 OD X 30L[90]() Specification : BOSS M12 X 20 (OD)X 30L R Nonestab
34) BOSS M12 X 20 OD X 65L[90]() Specification : BOSS M12 X 20(OD)X 65L C Nonestab
35) STEEL BLOCK SIZE 65X40X55 MM ST42 IS 1079[90]() Specification : STEEL BLOCK SIZE 65X40X55 MM ST-42-IS:1079 DRG. 645-01-7315-1/B FOR FINISH COMPONENT R Nonestab
36) SPRING WASHER DIA 6 IS 6735[90]() Specification : SPRING WASHER DIA 6 IS:6735 C Nonestab
37) AXLE GOST STD OBLIQUE BAR[90]() Specification : AXLE GOST STD./ BAR C Nonestab
38) HOOK PART NO 675 57271 A[90]() Specification : HOOK PART NO 675-57-271/A C Nonestab
39) WASHER SEAT BASE ASSY[90]() Specification : WASHER SEAT BASE ASSY C Nonestab
40) BOSS BRIGHT BAR DRG 620 01 1913 1 A[90]() Specification : BOSS BRIGHT BAR IS:9550-80 DRG 620-01-1913-1/A C Nonestab
41) CASTING FOR BLANK UPPER RACE RING[90]() Specification : CASTING FOR BLANK UPPER RACE RING C Nonestab
42) CASTING FOR LOWER RACE RING[90]() Specification : CASTING FOR LOWER RACE RING C Nonestab
43) TORSION BAR LH[90]() Specification : TORSION BAR LH C Nonestab
44) TORSION BAR RH[90]() Specification : TORSION BAR RH C Nonestab
45) U BOLT FRONT SPRING[90]() Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A C Nonestab
46) U BOLT REAR SPRING[90]() Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I] C Nonestab
47) WHEEL SCOTCHE[90]() Specification : WHEEL SCOTCHE WHEEL SCOTCHE DRG./PART NO.X-4700314-B C Nonestab
48) HINGE 765 50 2448[90]() Specification : HINGE DRG. NO. 765-50-2448/A C Nonestab
49) BRACKET FUEL TANK BRACKET[90]() Specification : BRACKET-FUEL TANK BRACKET P.NO. X7184610-B.1 C Nonestab
50) SUB ASSY OF DIPSTICK[90]() Specification : S/A OF DIPSTICK, PART NO. B5028203#.1 C Nonestab
51) HANDLE ASSY 675 50 CB301[90]() Specification : HANDLE ASSY AS PER DRG. NO. 675-50-CB301 C Estab
52) CASTING FOR COMMANDER RING[90]() Specification : CASTING FOR COMMANDER RING C Nonestab
Category : p
Grade : Grade III
Size : S
1Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) SAFETY BELT (FOR MPV) Description : SAFETY BELT (FOR MPV)() Specification : SAFETY BELT DRG. NO. OFPM 600 – 10 – 1014/G R Estab
2) Casting for Bracket for Turret Assy. Description : Casting for Bracket for Turret Assy.() Specification : Casting for Bracket for Turret Assy. R Estab
3) CAST. FOR BODY FOR TURRET ASSY.() Specification : As per Specification/drawing C Estab
4) Eye 765 58 193 A Description : Eye 765 58 193 A() Specification : Eye 765-58-193/A C Estab
5) Handle Gost Std Description : Handle Gost Std() Specification : Handle Gost Std. (Handle Blank) C Estab
6) LEVER CONTROL HAND/TORSION BAR Description : LEVER CONTROL HAND/TORSION BAR() Specification : LEVER CONTROL HAND C Estab
7) LOCK() Specification : As per Specification/drawing LF No. 9013193414000 C Estab
8) AXLE Description : AXLE() Specification : AXLE DRG. NO. 765-50-1355 C Estab
9) BOSS M12x22x25 OST 3 1496 72 Description : BOSS M12x22x25 OST 3 1496 72() Specification : BOSS M12x22x25 OST 3-1496-72 C Estab
10) BOSS M20 BY 25 OD 30L Description : BOSS M20 BY 25 OD 30L() Specification : BOSS M20 X 25 (OD) X 30L C Estab
11) BOSS M6 OD 20 16 L Description : BOSS M6 OD 20 16 L() Specification : BOSS M6XOD(20)X16L C Estab
12) BOSS M8 20 OD 20 L Description : BOSS M8 20 OD 20 L() Specification : BOSS M8X20(OD)X 20L C Estab
13) BUSH FOR MPV ARMY VERSION BUSH Description : BUSH FOR MPV ARMY VERSION BUSH() Specification : BUSH FOR MPV ARMY VERSION BUSH PART NO.645-01-7511-1 FOR MPV. C Estab
14) PIVOT FOR RACE RING ASSY FOR MPV FINISH Description : PIVOT FOR RACE RING ASSY FOR MPV FINISH() Specification : PIVOT FOR RACE RING ASSY FOR MPV (FINISH). DRG.NO. 645-01-7318-1/B. C Estab
15) SP STEERING FORGING PLUG (FUEL TANK INLET PIPE ASSY) Description : SP STEERING FORGING PLUG (FUEL TANK INLET PIPE ASSY)() Specification : SP STEERING FORGING PLUG (FUEL TANK INLET PIPE ASSY) C Estab
16) STRUT Description : STRUT() Specification : STRUT DRG. NO. 765-50-1676/A C Estab
17) THREADED BOSS M10X18MMX18MM Description : THREADED BOSS M10X18MMX18MM() Specification : THREADED BOSS M10 X 18MM (OD) X18MM LENGTH FULL THREADED MATERIAL :IS:9550 GR-2, 20C8 C Estab
18) THREADED BOSS M10 18 29() Specification : THREADED BOSS M10X18X29 C Estab
19) THREADED BOSS M12 X 1 point 75() Specification : THREADED BOSS M12 X 1.75 LF No. 9013193479000 C Estab
20) THREADED BOSS M6 X 12MM OD X12MM Description : THREADED BOSS M6 X 12MM OD X12MM() Specification : THREADED BOSS M6 X 12MM (OD) X12MM LENGTH TO DRG NO.218-03-1089/2 C Estab
Category : p
Grade : 3
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) PRESSURE AND VACCUM RELIEF VALVE[06]() Specification : PRESSURE AND VACCUM RELIEF VALVE / 172.31.081CB-1 E Nonestab
Category : p
Grade : Grade II
Size : S
1Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) CATCH OBLIQUE HOOK STEEL IS 4365 79 Description : CATCH OBLIQUE HOOK STEEL IS 4365 79() Specification : CATCH/HOOK STEEL IS:4365-79 C Estab
Category : p
Grade : 3
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) Right hand carrier - 172.62.136[06]() Specification : GOST:4543-71 C Nonestab
2) Left hand carrier - 175.62.137[06]() Specification : GOST 4543-71 C Nonestab
Category : p
Grade : Grade II
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) FOUR TYPES OF CASTING[02] 1(a) Sand Castings/172 TY-4,GOST 977-88 1(b) Any type of Steel Castings/172 TY-5, GOST B-19184-73 2.Investment Castings/172 TY-10, GOST 977-88 3.Non Ferrous Castings/172 TY-6,GOST 1583-83, GOST 2685-75 4.Grey Iron Casting/ 172 TY-7, GOST 1412-85.() Specification : STEEL, SPECIAL STEEL, ALUMINIUM ALLOY. GREY CAST IRON & INVESTMENT CASTINGS R Nonestab
Category : p
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) DISTANCE SLEEVE[06]() Specification : GOST 977-75 (FINISHED CASTING) E Nonestab
Category : p
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) PLATE PRESSURE[06]() Specification : GOST1412-85 (FINISHED CASTING) E Nonestab
Category : p
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) BRACKET BASE[06]() Specification : BRACKET BASE C Nonestab
Category : p
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) FILTER GAUZE TO LF NO 6206403021[62]() Specification : 172.42.025 C Nonestab
Category :
Grade : Grade III
Size : S
120 SUDHIR ENTERPRISES
Plot no 68, S.V.C.I.E, Balanagar hyderabad Telangana
PIN1 : 500037
Phone No. : 9849302825
GSTIN : 36AAKPA5756B1ZZ 		HYDS04924D

Download 		1Ordnance Factory Khamaria

Name Specification Use Status
1) STEEL FITMENTS FOR BOX 520:9 (9911358283)() STEEL FITMENTS SETS TO DRG.NO. (i) TRD-322352 (ii) TRD-322353 (iii) TRD-122355 MATERIAL: HOT-DIP GALVANISED STEEL. STEEL GRADE: FE PO2G, Z200 (SSAB & SS14-1151-10 OR SIMILAR. C NOT ESTABLISHED
Category : DDP,DP
Grade : II
Size : S
1Ordnance Factory Bhusawal

Name Specification Use Status
1) ANGLE PLATE VERTICAL AS PER DRG. NO. OFBH-CA-13-C-1969[99]() Specification : ANGLE PLATE VERTICAL FOR CARRIER 13A/16A AS PER DRG NO. OFBH-CA-13-C-1969 C Estab
2) HINGE WITH HINGE PIN ASSY FOR BOX H2A[99]() Specification : HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067 C Estab
3) ENGAGING PLATE FOR BOXH2A[99]() Specification : ENGAGING PLATE FOR BOX H2A AS PER DRG.NO.OFB/C/718. C Estab
4) TOP FRAME FOR CARRIER 13A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Estab
5) BOTTOM FRAME FOR CARRIER 13A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Estab
6) ASSEMBLE SECURING PLATE/1545 BOX H2A[99]() Specification : AS PER DRG./SPECIFICATION C Estab
7) CATCH PLATE WITHOUT ASSLY. OF BOX H2A[99]() Specification : AS PER DRG./SPECIFICATION C Estab
8) PIECE PACKING `A'[99]() Specification : PIECE PAKING A AS PER REF. PART NO. ISV 1820 C Estab
9) PIECE PACKING FOR BOX SM 601[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Estab
10) PIECE PACKING 'B'[99]() Specification : AS PER DRG NO. OFB/C/1541 C Estab
11) BRACKET FOR AMMN. BOX SM 601C[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Estab
12) CHANNEL - FOR BOX C-53A[99]() Specification : AS PER DRG./SPECIFICATION C Estab
13) CARRYING LINK[99]() Specification : DRG.NO OFB/C/1540 C Estab
14) CENTER PARTITION FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Estab
15) CATCH[99]() Specification : CATCH AS PER DRG NO OFB/C/1561 & CQA PART NO. ISV-585A CORROSPONDING AHSP DRG NO.ISV-585A DC 35750 DATED 14/07/1994. C Estab
16) HINGE - AS PER DRG. NO. OFB/C/1565[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Estab
17) Handle with Handle Clip for Box C-53A[99]() Specification : DRG, NO.OFB/C/1564 C Estab
18) BRACKET CARTRIDGE REAR FOR BOX C53[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Estab
19) HANDLE AS PER DRG. NO. OFB/C/1757[99]() Specification : AS PER O.F.BSL DRAWING/SPECIFICATION C Estab
20) BOTTOM CORNER PIECE FOR BOX C-53[99]() Specification : AS PER O.F.BHUSAWAL DRAWING C Estab
21) LID CORNER PIECE FOR BOX C-53A[99]() Specification : AS PER DRG./SPECIFICATION C Estab
22) BRACKET A-1 FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Estab
23) BRACKET CARTRIDGE FRONT FOR BOX C-53A[99]() Specification : AS PER DRG./SPECIFICATION C Estab
24) BOTTOM SUPPORT PIECE FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Estab
25) BRACKET END FOR SHELL FOR BOX C-53A[99]() Specification : AS PER DRG. NO. OFB/C/1477 C Estab
26) Bracket B-2 for Box C-53 A[99]() Specification : As per O.F.Bhusawal Drawing/Specification C Estab
27) BRACKET B-1 FOR BOX C-53A[99]() Specification : AS PER OFB DRG NO. OFB/C/1487 & ISV 2049 C Estab
28) BRACKET A-2 FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Estab
Category : p
Grade : Grade II
Size : S

Copyright © 2025 - OFB