1) X-RAY CHEMICALS COMPRISING OF AUTO PROCESSOR DEVELOPER AND AUTO PROCESSOR FIXER[10]()
Specification : X-RAY CHEMICALS COMPRISING OF AUTO PROCESSOR DEVELOPER AND AUTO PROCESSOR FIXER FOR INDUSTRIAL USE (TO BE SUPPLIED AS A SET FOR PREPARING HOMOGENEOUS SOLUTION OF 20 LITRES DEVELOPER AND 25 LITRES FIXER AND DETAILS OF CONSTITUENTS TO B
P
Nonestab
Category : p
Grade : Grade III
Size :
SS
224
Jawahar Lal Phool Chand
313, Main Road Sadar Bazar (Opp. Punjab National Bank), Delhi New Delhi
PIN1 : 110006
Phone No. : 011-23610244, Fax No.:- 011-23623986, Mob. No.:- 09810153387 GSTIN :
07AAAFJ5339B1ZR
Specification : ZINC PHOSPHATING COMPOUND, CONFORMING TO SPECIFICATIONS : JSS-0465-01-94 CLASS-II, FREE FROM PRECIPITATION, SPECIFIC GRAVITY:- 1.55-1.57, POINTAGE RANGE:- 30-35 (IN 100 LITRES OF WATER WITH 2.5 LITRES OF ZINC PHOSPHATING COMPOUND AND 2 LI
1) PHOSPHATING CHEMICAL FOR STEEL ITEMS WITH SPECN.AS FOLLOWS: BATH CONC.% 5 TO 10,TOTAL ACID TITRATION/BATH POINT 25 TO 40 IMMERSION TIME:15 TO 20 MINS.AT 85 TO 90 DEG.C BATH,COATING WT.: 800 TO 1000 Mg/Sq.Ft.,Sp.Gr.1.4TO1.44.COLOURLESS,FREE FM.VISIBLE[20]()
Specification : PHOSPHATING CHEMICAL FOR STEEL ITEMS WITH SPECN.AS FOLLOWS: BATH CONC.% 5 TO 10,TOTAL ACID TITRATION/BATH POINT 25 TO 40 IMMERSION TIME:15 TO 20 MINS.AT 85 TO 90 DEG.C BATH,COATING WT.: 800 TO 1000 Mg/Sq.Ft.,Sp.Gr.1.4TO1.44.COLOURLESS,FRE
R
Estab
2) PHOSPHATING CHEMICAL HAVING BATH COCENTRATION 2.5-3%(V/V), ACID TITRATION SHOULD BE 19 TO 21 MLS AND DIP POINT 10 TO 15 (MIN) AT TEMP 70-75 DEG.C. INGREDIENT ARE ZINC OXIDE(CAS:1314-13-2), PHOSPHORIC ACID(CAS:7664-38-2) & NITRIC ACID(CAS:7697-37-2) I[10]()
Specification : PHOSPHATING CHEMICAL HAVING BATH COCENTRATION 2.5-3%(V/V), ACID TITRATION SHOULD BE 19 TO 21 MLS AND DIP POINT 10 TO 15 (MIN) AT TEMP 70-75 DEG.C. INGREDIENT ARE ZINC OXIDE(CAS:1314-13-2), PHOSPHORIC ACID(CAS:7664-38-2) & NITRIC ACID(CAS:
R
Estab
3) DERUSTING CHEMICAL HAVING BATH COCENTRATION 30-35%(V/V), ACID TITRATION SHOULD BE 30 TO 35 MLS AND DIP TIME 20-30 MIN AT TEMP 60-70 DEG.C. MAIN INGREDIENT ARE PHOSPHORIC ACID(CAS: 7664-38-2), SULPHURIC ACID(CAS:7664:93-9) AND SURFACTANT IN HDPE JARRY[10]()
Specification : DERUSTING CHEMICAL HAVING BATH COCENTRATION 30-35%(V/V), ACID TITRATION SHOULD BE 30 TO 35 MLS AND DIP TIME 20-30 MIN AT TEMP 60-70 DEG.C. MAIN INGREDIENT ARE PHOSPHORIC ACID(CAS: 7664-38-2), SULPHURIC ACID(CAS:7664:93-9) AND SURFACTANT I
R
Estab
4) SPRAY DEGREASING CHEMICAL FOR STEEL CARTG. CASE WITH SPECN. AS FOLLOW: BATH CONCENTRATION 3-5%(W/V) POINT TITRATION 45-65 MLS AND CONTACT TIME 3-5 MIN WITH TEMP 70-80 DEG.C. MAIN INGREDIENT ARE CAUSTIC SODA(CAS:1310-73-2) AND SODA ASH (CAS:497-19-8)[10]()
Specification : SPRAY DEGREASING CHEMICAL FOR STEEL CARTG. CASE WITH SPECN. AS FOLLOW: BATH CONCENTRATION 3-5%(W/V) POINT TITRATION 45-65 MLS AND CONTACT TIME 3-5 MIN WITH TEMP 70-80 DEG.C. MAIN INGREDIENT ARE CAUSTIC SODA(CAS:1310-73-2) AND SODA ASH (CA
R
Estab
5) SAPONIFICATION FOR STEEL CARTG. CASE. BATH COCENTRATION 0.5-3.0%(W/V), DIP TIME 3-5 MINS AT TEMP 70-90 DEG.C MAIN INGREDIENT IS OCTADECANOIC ACID SODIUM SLT(CAS: 822-16-2)[10]()
Specification : SAPONIFICATION FOR STEEL CARTG. CASE. BATH COCENTRATION 0.5-3.0%(W/V), DIP TIME 3-5 MINS AT TEMP 70-90 DEG.C MAIN INGREDIENT IS OCTADECANOIC ACID SODIUM SLT(CAS: 822-16-2)
R
Estab
6) STABLIZER FOR STEEL CARTG. CASE FOR PHOSPHATING OPERATION. MAIN INGREDIENT IS SODIUM NITRITE(CASE: 7632-00-0)[30]()
Specification : STABLIZER FOR STEEL CARTG. CASE FOR PHOSPHATING OPERATION. MAIN INGREDIENT IS SODIUM NITRITE(CASE: 7632-00-0)
1) HOT ROLLED NORMALISED STEEL WIRE DIA. 5.5 MM AS PER BS 970:1983, PT - I, GD 080M40[AS PER RELEVENT SUPPLY ORDER]()
AS PER RELEVENT SUPPLY ORDER
R
Estab.
Category : P
Grade : I
Size :
L
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 41MM JSS 9510 01 SS C24 A LF 0113000041
Description : STEEL ROD 41MM JSS 9510 01 SS C24 A LF 0113000041()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK
R
Estab
Category : p
Grade : 3
Size :
M
234
ACE INOTEC MANUFACTURING PRIVATE LIMITED
Plot No #465, 4th Phase Peenya Industrial L Area Plot No #465, 4th Phase Peenya Industrial L Area Bangalore Karnataka
PIN1 : 560058
Phone No. : 8722900333 GSTIN :
29AALCA6168R1ZN
1) PRESSURE PAD TYPE-A ASSEMBLY PART ITX 60 SA DC-35916-A DT.21.02.95 AND PRESSURE PAD TYPE-B DC 35916 A, DTD.21.02.95 ()
SPECN. CQA(A) 1817(S) DC 36902-A DT.10.06.2003 RESPECTIVELY (TO BE SUPPLIED BOTH THE ITEM AS A SET, (EACH SET CONTAINS PRESSURE PAD TYPE A = 03 NOS & PRESSURE PAD TYPE B = 1 NO.)
C
Not Estab.
2) SENSING ELEMENT (EMPTY ASSEMBLY) ()
DRG.PT NO.ITX-39A DC 35916 A DT.21.02.95 SPECN.CQA(A)1817(s) DC 36789-A,DT.22.10.2001 WITH (1) DUST CUP DRG PT NO.ITX-283 DC 35597-A DT.06.10.93 = 01 NO.(2) FASTNER FOR SAFETY PIN CORD DRG.NO.ITX 284 DC 35916-A DT.21.02.95 = 01 NO. (3) DUST COVER DRG P
C
Not Estab.
3) MINE A/T 4D ND (EMPTY ASSEMBLY) ()
DRG.PT NO.ITX-46A AND SPECN.CQA(A) 1817(s) DC NO.36789-A,DT. 22.10.01.[REFER SUB ASSY DRG. BODY MINE ITX-347,END CAP ITX 344,PLUG CLOSING BOTTOM ITX 340,PLUG CLOSING END CAP ITX 341 HOUSING FUZE ANTI REMOVAL ITX 345,PIN LOCKING END CAP ITX343 TRANSIT PIN
C
Not Estab.
Category : P
Grade : II
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A[65]()
Specification : SPECN.NO. CQA(A) 2804
C
Estab
2) 6519000002 CONTAINER 47B (PLASTIC) FOR FZ 117[65]()
Specification : AMMN CONTAINER 47B.DES.REF. CIA/AMN/2483, PT.NO.ISV-515A DC-36647-A,CONSISTING OF (1) BODY TO PT.NO.ISV 1769 2)LID PT.NO.ISV 1770 (3) RING PT.NO.ISV 1771 (4) DISC DIA 28 X 7.5 + - 0.5 THICK CAPCELL.
C
Nonestab
3) 6473200483 O RING (MOD) FOR 155MM ERFB BB[64]()
8) 6432800002 RING OD73MM ID 60MM TH 6MM TORPEDO[64]()
Specification : IS 2036 FOR MATERIAL GENL SPCN:NA SPEC A-31B
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) 3rd SET OF 4 ITEMS FOR MMHG 9911358526[99]()
Specification : 3rd SET OF 4 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.'O'RING FOR MAIN HOUSING (QTY.-2NOS.) DRG.NO.TBRL/MMG-H/MK-1/042/R0 2. 'O'RING FOR MAGAZINE DRG.NO.TBRL/MMG-H/MK-1/043/R0 3. PULL RING DRG.NO.TBRL/MMG-H/MK-1/044/R0 4. SEALING BUS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) O RING 78X2 LF 2013436144[20]()
Specification : 'O' RING 78X2 (2013436144)
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) O RING 78X2 LF 2013436144[20]()
Specification : 'O' RING 78X2 (2013436144)
C
Nonestab
2) BALLISTIC CAP ASSEMBLY FOR 84MM HEAT 551 LF 9911357815[99]()
1) 100mm IR OPTICS FOR UC T IMAGE LF 2690000235[26]()
Specification : 100MM IR OPTICS FOR UC T.IMAGE AS PER SPECIFICATION NO. ODC-OLF/R&D/RL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) IR OBJECTIVE ASSEMBLY[74]()
Specification : IR OBJECTIVE ASSEMBLY FOCAL LENGTH 100MM , SPECIFICATION AS PER SPEC- 010
C
Nonestab
2) OBJECTIVE LENS ASSY 8X6 TO 4X3 DEGREE LENS SUITABLE FOR REQUIREMENT AS PER MCT 3500[74]()
Specification : OBJECTIVE LENS ASSY 8X6 TO 4X3 DEGREE LENS SUITABLE FOR REQUIREMENT AS PER MCT 3500
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) INFRARED LENS ASSEMBLY 50MM[74]()
Specification : INFRARED LENS ASSEMBLY,FOCAL LENGTH GREATER THAN OR EQUAL TO 50 MM,F LESS THAN OR EQUAL TO 1.25,COMPATIBLE WITH 12 MICRON PITCH DETECTOR,MANUAL FOCUS,WEIGHT LESS THAN OR EQUALTO 380 GMS,TRANSMISSION GREATER THAN OR EQUAL TO 80%,HFOV GREAT
C
Nonestab
Category :
Grade : Grade III
Size :
L
237
R A Technology
313/9, Ward No. 9, Near Gandhi Park, New Colony Palwal Haryana
PIN1 : 121102
Phone No. : 42547680 GSTIN :
06AAZFR1315E1Z6
1) CONVERSION OF BOLT BREECH FROM FORGING TO DRG.NO.29P 0013* (M) required for 0.315 Sporting Rifle[00]()
Specification : AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FORGING TO DRG NO OFM 32851 REQUIRED FOR TA LINK TO DRG NO OFM 32844[70]()
Specification : As per Drawing and specification
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO DS CAT NO 1005 001514 ICR 1325[70]()
Specification : INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO DS CAT NO 1005 001514 ICR 1325
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BLOCK GAS FORGING TO DRG. NO.RFI SK 2132-E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL (ICR-1322)[70]()
Specification : AS PER DRG. NO.RFI SK 2132-E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL (ICR-1322)
C
Nonestab
2) HAMMER FORGINGS TO DRG. M6-0001E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL) (ICR 1256) (FULLY FINISHED CONDITION) (5000 NOS = 2500 SETS)[70]()
Specification : AS PER DRG. M6-0001E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL) (ICR 1256) (FULLY FINISHED CONDITION) (5000 NOS = 2500 SETS)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INPUT MATERIAL: BODY FORGING CONVERSION OF BODY TO D.S.CAT. NO. 1005-001514(ICR-1325)(I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I,(II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II,FROM FORGING TO DRG. NO. RFI/SK/725/IL[00]()
Specification : AS PERD.S.CAT. NO. 1005-001514(ICR-1325)(I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I,(II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II,FROM FORGING TO DRG. NO. RFI/SK/725/IL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION OF BOLT BREECH FROM FORGING TO TEND DRG.NO 2369 required for 0.315" Sporting Rifle[00]()
Specification : AS PER TEND DRG.NO 2369 required for 0.315" Sporting Rifle
C
Nonestab
2) BOLT BREECH FORGING TO DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle
Specification : INVESTMENT CASTING OF EAR. 6360693.
C
Nonestab
11) INVESTMENT CASTING OF PLATE 5189623[90]()
Specification : INVESTMENT CASTING OF PLATE.5189623
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG No 62C 1013 250 D3 SLEEVE HANDLE BASE BARREL FOR 12 7mm A D GUN A 1013[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN.
A 1013
"
C
Nonestab
2) INVESTMENT CASTING TO DRG No 62C 1012 250 E3 FOR FLASH HIDER[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1012 250 E3. FOR FLASH HIDER
"
C
Nonestab
3) INVESTMENT CASTING TO DRG No 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT
"
C
Nonestab
4) INVESTMENT CASTING TO DRG No 62C 2463 250 G3 FOR HOUSING EJECTOR[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 2463 250 G3.
FOR HOUSING EJECTOR."
C
Nonestab
5) INVESTMENT CASTING TO DRG No 64C 2026 250 G3 REQUIRED FOR HOLDER TO DRG No 2A42 02 026 C2026[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 2026 250 G3.
REQUIRED FOR HOLDER TO DRG.No.: 2A42.02.026 (C2026).
C
Nonestab
6) INVESTMENT CASTING TO DRG No 64C 5014 250 I3 REQUIRED FOR CARRIER TO DRG No 2A42 05 014 C5014[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 5014 250 I3. REQUIRED FOR CARRIER TO DRG.No. 2A42 05 014 (C5014)
C
Nonestab
7) INVESTMENT CASTING TO DRG No 64C 5021 250 I3 REQUIRED FOR PAWL TO DRG NO 2A42 05 024 C5024[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.024 (C5024).
C
Nonestab
8) INVESTMENT CASTING TO DRGNo 64C 5028 250 H3 REQD FOR CONNECTING LINK RIGID DRG No 2A42 05 028 C5028[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5028 250 H3. REQD FOR CONNECTING LINK RIGID (DRG.No. 2A42.05.028) (C5028)
C
Nonestab
9) INVESTMENT CASTING TO DRGNo 64C 5033 250 G3 REQUIRED FOR CONNECTING LINK RIGID DRG NO 2A42 05 033 C5033[70]()
Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 5033 250 G3. REQUIRED FOR CONNECTING, LINK, RIGID.
(DRG.NO. 2A42 05 033) C5033.
C
Nonestab
10) INVESTMENT CASTING TO DRG NO 64C 5089 250 G3 REQD FOR CATCH BODY TO DRG NO 2A42 05 089 C5089[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG NO 64C 5089 250 G3.
REQD FOR: CATCH BODY TO DRG NO 2A42.05.089 (C5089)
C
Nonestab
11) INVESTMENT CASTING TO DRG No 64C 5111 250 K3 ALT REQUIRED FOR HANDLE TO DRG No 2A42 05 111 C5111[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5111 250 K3 ALT. REQUIRED FOR HANDLE TO DRG.No. 2A42 05 111 (C5111)
C
Nonestab
12) INVESTMENT CASTING TO DRG No 64C 5112 250 G3 REQUIRED FOR CONNECTING LINK RIGID DRG NO 2A42 05 112[42]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5112 250 G3. REQUIRED FOR CONNECTING LINK, RIGID (DRG.NO.2A42 05 112)
S
Nonestab
13) INVESTMENT CASTING TO DRG No 64C 2028 250 J3 REQUIRED FOR BRAKE TO DRG No 2A42 02 028 C2028[70]()
Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 2028 250 J3.
REQUIRED FOR: BRAKE TO DRG.No.: 2A42.02.028 (C2028)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]()
Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle
2) INVESTMENT CASTING TO DRG NO SKM 752 STAR 2 FOR BRACKET CARRYING HANDLE[01]()
Specification : INVESTMENT CASTING TO DRG.NO.SKM-752*2 FOR BRACKET CARRYING HANDLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) HEAD TO SK NO OTF S 002 DRG NO 4 025998 DET NO 002 AND DC 35862 A DT 01 12 94 IN FINISHED CONDITION WITHOUT SURFACE TREATMENT[62]()
Specification : HEAD(TO SK. NO. OTF/S/002)DRG. NO. 4-025998 DET. NO. 002 AND DC 35862-A DT 01/12/94 IN FINISHED CONDITION (WITHOUT SURFACE TREATMENT)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT)
C
Nonestab
Category :
Grade : Grade III
Size :
S
240
VETRIVIGAAS AUTO TECH
B16A,SIDCO INDUSTRIAL ESTATE,HOSUR SIDCO INDUSTRIAL ESTATE HOSUR Tamil Nadu
PIN1 : 635109
Phone No. : 9443320879 GSTIN :
33AANFV3202G2ZE
Specification : AS PER DRG. No.29P 0004* required for 0.315" Sporting Rifle
C
Nonestab
2) SPRING LEAF BED BACK SIGHT TO DRG NO 29P 0008 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG. NO.29P 0008 required for 0.315" Sporting Rifle
C
Nonestab
3) SCREW SPRING BAND BACK SIGHT TO DRG NO 29P 0009 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.29P 0009 required for 0.315" Sporting Rifle
C
Nonestab
4) TRIGGER TO DRG NO 29P 0040STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110STR 2 WITH FIRMS MATERIAL[70]()
Specification : SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110STR 2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY AS PER DRG NO K 2050 ALT STR 2 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : UPPER HAND GUARD ASSY AS PER DRG NO K 2050 ALT STR 2 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Nonestab
2) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2031
C
Nonestab
3) SELECTOR LEVER AS PER DRGNOK 2074 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL
C
Nonestab
4) DRIFT AS PER DRG No K 9004 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 9004 WITH FIRM'S MATERIAL
C
Nonestab
5) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL
C
Nonestab
6) PREMACHINED BLANK STAGE 2 FOR K 4001 K 5001 K 6001 AS PER DRG NO TEND 2449 WITH OFT RAW MATERIAL[00]()
Specification : AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL
C
Nonestab
7) CONVERSION OF BOLT BREECH FROM FORGING TO DRGNO 29P 0013STAR M required for 0POINT0315 Sporting Rifle[00]()
Specification : AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle
C
Nonestab
8) PIN FIXING BAND BACK SIGHT TO DRG No 29P 0006 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle
C
Nonestab
9) CAP SLING TO DRG NO 29P 0044STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG NO.: 29P 0044* required for 0.315" Sporting Rifle
C
Nonestab
10) PIN STOP BOLT LOCKING TO DR NO 29P 0048STAR required for 0POINT315 Sporting Rifle[70]()
Specification : DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle
C
Nonestab
11) SCREW BAND INNER TO DRG. NO.29P 0051* required for 0.315[70]()
Specification : AS PER DRG. NO.29P 0051* required for 0.315" Sporting Rifle
C
Nonestab
12) SCREW PLATE BUTT TO DRG NO 29P 0059STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle
C
Nonestab
13) SWIVEL SLING REAR TO DRG NO 29P 0065STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INPUT BLANKS OF BLOCK GAS TO TEND 1966STAR WITH FIRMS MATERIAL FOR RIFLE 7POINT62 1A1 ICR 1322[70]()
Specification : AS PER TEND 1966* WITH FIRMS MATERIAL FOR RIFLE 7.62 1A1 (ICR- 1322)
C
Nonestab
2) MFG AND SUPPLY OF PIN RESTRICTING GAS REGULATOR TO DS CAT NO 5315 001756 DC NO 24275 SA DT 26 02 99 REQUIRED IN WHITE FINISHED CONDITION[70]()
Specification : AS PER DS CAT NO.5315-001756 DC NO. 24275-SA DT. 26/02/99 REQUIRED IN WHITE FINISHED CONDITION.
C
Nonestab
3) SUPPLY OF BLOCK EJECTOR ICR 1324 TO DS CAT N0 1005 001513 DC NO 26758 SA DATED 28 05 15 FULLY FINISHED CONDITION WITH FIRM MATERIAL LATEST ISSUE TO BE FOLLOWED[70]()
Specification : AS PER ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.
R
Nonestab
4) STUD COCKING HANDLE D S CAT No 5307 004445 D C No 24474 SA DATED 18 08 1999 FOR D C No LATEST ISSUE TO BE FOLLOWED ICR 1202[70]()
Specification : AS PER D.S.CAT.No.: 5307-004445, D.C.No.:24474-SA, DATED:18/08/1999 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED. (ICR-1202)
C
Nonestab
5) PIN RETAINING LOCKING CATCH TO D S CAT NO 5315 001773 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1221[70]()
Specification : AS PER D.S. CAT. NO.5315-001773 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1221)
C
Nonestab
6) KNOB LEVER LOCK TO D S CAT NO 1005 001656 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1318[70]()
Specification : AS PER D.S. CAT NO.1005-001656 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1318)
C
Nonestab
7) STUD LEVER LOCK TO D S CAT NO 1005 001659 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1321[70]()
Specification : AS PER D.S. CAT NO.1005-001659 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1321)
C
Nonestab
8) SCREW FRONT SLING LOOP TO D S CAT NO 5305 004999 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1206[70]()
Specification : AS PER D.S. CAT NO.5305-004999 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1206)
C
Nonestab
9) SCREW ZEROING BACK SIGHT TO D S CAT NO 5305 018164 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1229[70]()
Specification : AS PER D.S. CAT NO.5305-018164 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1229)
C
Nonestab
10) BUSH CYLINDER GAS TO D S CAT NO 3120 004656 ICR 1241 TO D C NO 23506 SA DATED 27 09 1996 FULLY FINISHED CONDITION WITH FIRMS MATERIAL[70]()
Specification : AS PER D.S. CAT. NO. 3120-004656 (ICR-1241)TO D.C. NO.23506-SA, DATED 27.09.1996 (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL)
C
Nonestab
11) SUPPLY OF STAY HAMMER TO DRG No TEND 2016 WITH FIRMS MATERIAL ICR1333[70]()
Specification : AS PER DRG. No. TEND 2016 WITH FIRM'S MATERIAL.(ICR-1333)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CLEANING ROD AS PER DRG No K 9001 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 9001 WITH FIRM'S MATERIAL
E
Nonestab
2) SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL[70]()
Specification : SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL
C
Nonestab
3) CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL[70]()
Specification : CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL
E
Nonestab
4) LOWER HAND GUARD BAND AS PER DRG NO K 1204 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 1204 WITH FIRMS MATERIAL
C
Nonestab
5) BULLET GUIDE AS PER DRG No TEND 2570 STR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : BULLET GUIDE AS PER DRG No TEND 2570 STR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
2) CONVERSION OF BOLT BREECH FROM FORGING TO DRGNO 29P 0013STAR M required for 0POINT0315 Sporting Rifle[00]()
Specification : AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle
C
Nonestab
3) BAND FORE SIGHT TO DRG NO 29 P 0002STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG. NO.29 P 0002* required for 0.315" Sporting Rifle
C
Nonestab
4) SUPPLY OF HOUSING HAMMER SPRING TO DS CAT NO 1005 001682 WITH DC NO 24979 SA DT 27 03 2001 IN FULLY FINISHED CONDITION ICR 1332[70]()
Specification : AS PER DS CAT NO.1005-001682 WITH DC NO.24979-SA DT.27.03.2001 IN FULLY FINISHED CONDITION (ICR-1332)
E
Nonestab
5) SUPPLY OF STAY HAMMER TO DRG No TEND 2016 WITH FIRMS MATERIAL ICR1333[70]()
Specification : AS PER DRG. No. TEND 2016 WITH FIRM'S MATERIAL.(ICR-1333)
C
Nonestab
6) SUPPLY OF EXTRACTOR TO D S CAT NO 1005 001571 D C NO 24891 SA DATED 05 12 2000 ICR 1262 FULLY FINISHED CONDITION WITH FIRM MATERIAL[70]()
Specification : AS PER D.S.CAT. NO.: 1005-001571, D.C.NO.: 24891-SA, DATED" 05/12/2000 (ICR - 1262)(FULLY FINISHED CONDITION WITH FIRM MATERIAL)
C
Nonestab
7) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
8) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL[70]()
Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL
R
Nonestab
9) MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) PULL THROUGH 5 point 56 MM 1A NYLON TO DS CAT NO 1005 557944 DC I NO 26532 SA DT 30 07 10[71]()
Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) SLING ASSEMBLY OF BLACK COLOUR[72]()
Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BUFFER BODY FOR PLATE BACK ASSY[70]()
Specification : BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15
Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15
C
Nonestab
3) Trigger guard[70]()
Specification : AS PER DRG. DS CAT No. 1005-00060
C
Nonestab
4) GUARD HAND UPPER ASSY FOR LMG 5 56 MM IN FINISHED CONDITION[70]()
Specification : GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA, DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDIT ION.
C
Nonestab
5) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB[70]()
Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
C
Nonestab
6) TRIGGER ASSEMBLY TO DS CAT NO 1005 006589[70]()
Specification : TRIGGER ASSEMBLY TO DS CAT NO 1005 006589 DC(1) NO 26375 SA DT 05/09/07 WITH DETAILS OF LATEST ISSUE INSPECTION TO BE GOVERN BY RELEVANT CLAUSES OF SPECN JSS-1005-04 2006 OF LATE ST ISSUE and ANY OTHER ACCEPTANCE CRITERIA TO BE PROVIDED BY
C
Nonestab
7) Spring Lock CQA I 393 23[70]()
Specification : SPRING LOCK AS PER DRG.NO.CQA (I)-393/23,CAT/PT.NO.-5340-014213 for devicd firing IB ()
C
Nonestab
8) Grip Handle Left and Right For FIRING DEVICE[70]()
Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125
C
Nonestab
9) MACHINING OF HOUSING MODIFIED FOR STRIKER MECHANISM[70]()
Specification : MACHINING OF HOUSING MODIFIED DRG.NO.NAD 7606/6 TO FINISHED HOUSING MODIFIED AS PER DRAWING.DIE CASTING HOUSING MODIFIED WILL BE ISSUED AGAINST BANK GAURANTEE FORM LF NO.0841271004
C
Nonestab
10) SLEEVE DRAWING FOR STRIKER MECHANISM[70]()
Specification : SLEEVE DRAWING NO. NAD- 7606/7 FOR STRIKER MECHANISM NO. 8 MK-1 IN FINISH CONDITION.
C
Estab
11) HAMMER FOR LMG IN FINISHED CONDITION[70]()
Specification : HAMMER DRG NO SK3143/71 (DS CAT NO.1005-008003) FOR LMG 5.56MM IN FINISHED CONDITION FORGING TO BE SUPPLIED BY SAF AGAINST L.F.0412079014. DC NO.26922-SA, DT.29.08.16.”
C
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT LEAF AS PER DRG NO K 2021STR WITH FIRMS MATERIAL[70]()
Specification : ASUPPLY OF REAR SIGHT LEAF AS PER DRG NO K 2021STR WITH FIRMS MATERIAL
C
Nonestab
2) BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR4[70]()
Specification : BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR4
C
Nonestab
3) BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR
