5) GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 FOR RIFLE 5.56MM INSAS. [79]()
Specification :GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK-
C
Nonestab
6) GUARD HAND ASSY.(UPPER)(STEEL STRIP) FOR RIFLE 5.56MM INSAS. [79]()
Specification :GUARD HAND ASSY.(UPPER)(STEEL STRIP)[FOR DARK BLUE GRAY COL.TO DS CAT NO.1005-560046 (DC-26533-SA). CONSISTING OF:-1)1005-560047(DC-25638-SA) 2)1005-560832(DC-26635-SA) &3)5320-022259(DC-26504-SA),(2-NOS.)FOR RIFLE 5.56MM INSAS.
C
Nonestab
7) BUTT PLASTIC (SOLID) FOR CQB CARBINE. [70]()
Specification : DRG No. RFI SK 10294
C
Nonestab
8) FOLDABLE BUTT FOR RIFLE 5.56MM INSAS[70]()
Specification : FOLDABLE BUTT FOR RIFLE 5.56MM INSAS(STEEL COMPT)CONSIDERINGOF BUTT FRAME ASSY, ARDE/2975/41(DC-S/515) CONSIST OF 10,11,19,20,23,29,33,35,36,37,46 & RFI.SK.NO.7225-S,7226-S,7227-S ,7369-S AND SPG.DOWEL SLEEVE 2DIA X7MM & 5DIA X 42MM & 6DI
C
Nonestab
Category : DDP,DP
Grade : II
Size :
1Ordnance Cable Factory Chandigarh
Name
Specification
Use
Status
1) HDPE MASTER BATCH BLACK()
AS PER RELEVENT SUPPLY ORDER
R
Not Estab.
2) PE COMPOUND FOR INSULATION()
TEC approved JFC Specification No. GR/CUG-01/03 Aug 2003
R
Non Established
Category : DDP,DP
Grade : I,II
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Grip Handle Left and Right For FIRING DEVICE[70]()
Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125
1) TWIN CONTAINER 520 9 PART 1202503 LF 9911358476[99]()
Specification :
E
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Bag Polythene for packing NC[21]()
Specification : BAG POLYTHENE FOR PACKING NC- QUALITY OF MATERIAL TO CONFORM TO LOW DENSITY POLYETHYLENE TYPE-1 SPECIFICATION JSS- 9330 - 03-2014,REV.NO.3.THICKNESS 0.18 PLUS MINUS 0.02MM.DIMENSION AND HEAT SEALING AS PER DRG.NO.OFBA/NC/46 AMENDED ON 27.
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CONTAINER WITH DISC FOR MORTAR BOMB 81 mm ILLG.()
CQA(A) 2303
C
Estab
2) CONTAINER FOR AUGMENTING CARTG. FOR MORTAR BOMB 51 mm SMOKE()
ARDE 1935
C
Estab
3) CELLULOID STRIP 50 x 70 mm FOR MORTAR BOMB 51 mm ILLG.()
JSS 1375-03 : 2004
C
Estab
4) CYLINDER POLYTHENE FOR FOG SIGNAL()
OFDR/CARTG.-84/R-3/A3
C
Estab
5) CELLULOID STRIP 50 Sq. mm FOR MORTAR BOMB 51 mm SMOKE()
JSS 1375-03 : 2004
C
Estab
6) AMMUNITION CONTAINER 75A ( ASSY) FOR FLARE TRIP WIRE()
CQA/AMMN/3259
C
Estab
7) AMMN. CONTAINER PLASTIC 47B FOR FUZE 213 P MK 5 (M2,M3,& M4)()
CIA/AMN/2483
C
Estab
8) AMMN. CONTAINER 69A/L FOR MORTAR BOMB 51 mm SMOKE / ILLG.()
ARDE 2125
C
Estab
9) LINER PRIMARY CHARGE(POLYSTER SHEET G C Q)()
JSS 9330-03 : 1995
C
Estab
10) OBTURATOR FOR SHELL 155 mm ILLG M1A1()
JSS 9330-03 : 1995
C
Estab
11) PLASTIC CONTAINER 84T FOR SHELL 84 mm ILLG.()
OFDR/CARTG./79/A2
C
Estab
12) CARRIER AMMN. 17A FOR MORTAR BOMB 81 mm ILLG. 2A()
ARDE 2224
C
Estab
13) VENTURY ASSY FOR PYRO(INDIA) PARA FLARE RED()
OFDR/CT/14/U I/A3
C
Estab
Category : DDP,DP
Grade : II
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SEALING RING TO DRG.NO.TRD-1-2-2246 (9911357874)()
SEALING RING TO DRG.NO.TRD-1-2-2246
C
NOT ESTABLISHED
2) SLIPPING RING F1301-152220-B (6770430100)()
SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD.15/01/01 SPECN:- F1301-924320-D (CQA-4919) DC NO-36730-A DTD.15/01/01
C
NOT ESTABLISHED
Category : DDP,DP
Grade : I,II
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TWIN CONTAINER 520:9 DRG TRD 422155[99]()
Specification : TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155.
C
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CAP AND BOTTOM FOR 84MM SMOKE 469C LF 9911358520[99]()
Specification : CAP - PART NO.4102110 TO OEM DRG.NO.301178701/TRD DRG.NO.4.2.2743 & BOTTOM- PART NO. 6413039 TO OEM DRG.NO. 304061652/TRD DRG. NO.2.2.2742
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141000210 BODY MINE FOR 1B DIR. WITH ADAPTER.[61]()
Specification : SPECN. IA 1285(B
C
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6206500061 MINE BODY A T DRILL 1A ND EMPTY[62]()
Specification : MINE DRILL A.T.1A ND EMPTY WITHOUT FUZE DRILL MINE A/T 1C ND TO DES. REF. NO. CIA/AMN/2255, DRG. PT. NO. ITX 11 GE DC NO. 37050-A DTD 19/04/06, SPECN NO.CQA 1801(D) DC 37050-ADT.19/04/06.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141600000 MINE APERS M 14 EMPTY WITH FZ INTGL[61]()
Specification : CQA (A) 1837
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1749009905 RIVET ITX 239 MINE AP 1B DIR[17]()
Specification : RIVET TO DESIGNERS REF.ARDE-1521 DET NO.6 DRG.PT.NO. ITX-239 DC 35824-A
1) SLIPPING RING (6770430100)
Description : SLIPPING RING (6770430100)()
Specification : SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Nalanda
Name
Specification
Use
Status
1) PLASTIC FILM SLEEVE FOR M-92[64]()
Specification/Drawing No.
OFN/BMCS/M-92/PLASTIC FILM SLEEVE
C
Estab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Nalanda
Name
Specification
Use
Status
1) PLASTIC FILM BAG FOR M-92[64]()
Specification/Drawing No.
OFN/BMCS/M-91/M-92/PLASTIC FILM BAG
C
Estab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Nalanda
Name
Specification
Use
Status
1) PLASTIC FILM BAG FOR M-91[64]()
Specification/Drawing No.
OFN/BMCS/M-91/M-92/PLASTIC FILM BAG
C
Estab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Loop Sling Front for JVPC[70]()
Specification : Loop Sling Front to DRG No. 0204 03 02 37 39 002 00 DB
C
Nonestab
2) GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DA[70]()
Specification : GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DA
C
Nonestab
3) TRIGGER GUARD MOULDING for JVPC[70]()
Specification : TRIGGER GUARD MOULDING for JVPC DRG. NO.0204-03-03-16-26-000-00DD
C
Nonestab
4) HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW[70]()
Specification : HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW
C
Nonestab
5) COCKING HANDLE MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-01-14-000-00DB CONSISTING OF INSERT COCKING HANDLE[70]()
Specification : COCKING HANDLE MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-01-14-000-00DB CONSISTING OF INSERT COCKING HANDLE
C
Nonestab
6) PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'[70]()
Specification : PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'
C
Nonestab
7) BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER[70]()
Specification : BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER
C
Nonestab
Category : ddp
Grade : Grade III
Size :
S
1Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Blank for Casing Barrel drg .no. SK-5252 for Carbine 9mm
Description : Blank for Casing Barrel drg .no. SK-5252 for Carbine 9mm()
Specification : AS PER DRG.
C
Estab
2) GUARD HAND ASSEMBLY TO DS CAT NO1005 007775
Description : GUARD HAND ASSEMBLY TO DS CAT NO1005 007775()
Specification : GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO. 26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND GUARD CQA(SA)SK-996,DSCATNO.1005-560844,DC(I)NO26635-SA,DT,12.5.12NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR COD
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Bhandara
[ENR Registration]
Name
Specification
Use
Status
1) TEFLON SHEET FILM
Description : TEFLON SHEET FILM()
Specification : TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2
Specification : TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1
R
Estab
Category : ddp
Grade : 1
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) PLASTIC CONTAINER TO DRG NO FS 2368C FOR 84MM TPT PROJECTILE
Description : PLASTIC CONTAINER TO DRG NO FS 2368C FOR 84MM TPT PROJECTILE()
Specification : PLASTIC CONTAINER TO DRG.NO.FS-2368C FOR 84MM TPT PROJECTILE
C
Estab
2) ROTOR HOLDER TO OFAJ DRG NO FS 2473 B FOR FUZE M842 AMMN 20 MM AMR HEI
Description : ROTOR HOLDER TO OFAJ DRG NO FS 2473 B FOR FUZE M842 AMMN 20 MM AMR HEI()
Specification : "ROTOR HOLDER"TO OFAJ DRG.NO.FS-2473 B FOR FUZE M842 AMMN. 20 MM AMR HEI.
C
Estab
3) ROTOR HOLDER TO OFAJ DRG NO FS 2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI
Description : ROTOR HOLDER TO OFAJ DRG NO FS 2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI()
Specification : "ROTOR HOLDER" TO OFAJ DRG.NO. FS-2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI
Specification : EXPANDED POLYSTYRENE SELF EXTINGUISHING TYPE(TYPE 2) DENSITY 30 KG/CU.M.CONFORMING TO CLAUSE 4.5.1 OF SPECIFICATION IS: 4671-1984 ( FIRST REV.) REAFFIRMED 1990 TO CQA(A) DRAWING NO 13981-1.0 DC 35707-A DTD 5-5-94 SIZE 108MM PLUS MINUS 2MM
2) SIDE STOCK TRIGGER GRIP RIGHT SUB-ASSY IN FINISHED CONDITION TO DS CAT NO.1005-000604 DC(I) NO.25283-SA DT.07-03-02 LATEST ISSUE
Description : SIDE STOCK TRIGGER GRIP RIGHT SUB-ASSY IN FINISHED CONDITION TO DS CAT NO.1005-000604 DC(I) NO.25283-SA DT.07-03-02 LATEST ISSUE()
Specification : SIDE STOCK TRIGGER GRIP RIGHT SUB-ASSY IN FINISHED CONDITION TO DS CAT NO.1005-000604 DC(I) NO.25283-SA DT.07-03-02 LATEST ISSUE
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) CONTAINER WITH DISC CLOSING
Description : CONTAINER WITH DISC CLOSING()
Specification : CONTAINER WITH DISC CLOSING TO DRG. NO.ARDE-1935, DET NO.1 PART NO.ITV 28A SHEET-1 TO DC.36747-A DT. 09-03-2001,SHEET-2 DC-35684-A DT.06-04-94 TO SPECN.CQA(A) 2303(f).
Specification : MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN. CQA(A) 1817(t) DC NO.37096-A, DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347, END CAP ITX 344, PLUG CLOSING BOTTOM ITX 340, PLUG CLOSING END CAP ITX 341 HOUSING FUZE ANTI
C
Estab
5) AMMN.CONTAINER 47 B
Description : AMMN.CONTAINER 47 B()
Specification : AMMN.CONTAINER 47 B FOR FUZE 117 MK -20 ISV-515A DC.36647.A RETRACED Dt.12.07.2013.
C
Estab
6) POLYTHENE BAG TO DRG.CIA/AMN/2185
Description : POLYTHENE BAG TO DRG.CIA/AMN/2185()
Specification : POLYTHENE BAG TO DRG.CIA/AMN/2185, DET.NO-10, PART NO.ISV-1627, DC NO.36832-A, DT.10.5.02. MATERIAL LOW DENSITY POLYETHYLENE TYPE-1 TO SPECN: JSS-9330-03:2014 REV-3 DC NO.5292 ME, DT.16.12.14, SIZE-1170MM x 300MM x0.5 MM THICK.
C
Estab
7) CUP
Description : CUP()
Specification : DRG. NO. ARDE 2043 DET. NO. 5 PART NO. ISV-1764 DC NO. 36356-A, SPECIFICAITON NO. CQA(A) 2804(m) DC NO. 36202-A.
C
Estab
8) CONTAINER TO ARDE-1933, DET-4,PT.NO.
Description : CONTAINER TO ARDE-1933, DET-4,PT.NO.()
Specification : CONTAINER TO ARDE-1933, DET-4, PT.NO. ITV 170, DC NO.36207-A, DT. 02-12-96 SPECN. CQA(A)-2322(r) DC 37329-A.
C
Estab
9) PLUG FUZE HOLE 50.8 MM 2A PLASTIC
Description : PLUG FUZE HOLE 50.8 MM 2A PLASTIC()
Specification : ISX-315 DESIGNERS REF NO. CIA/AMN/2171 DC NO.37347-A DT.29.10.13.
C
Estab
10) GRUMMET ASSEMBLY CONSISTING OF (1) GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT
Description : GRUMMET ASSEMBLY CONSISTING OF (1) GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT()
Specification : DRG. NO.ARDE-2125, DET NO.3 PART NO.ISV 533 A, DC 36469-A SPECN NO. CQA(A) 2804(m) DC 36202-A. PACKING PLYWOOD/ CORRUGATED BOXES DULY TAPE BANDED (MAX. 50 CONT. PER BOX).
Specification : OBTURATOR TO DESIGNER REF.NO.155- 1140, DC NO.37025-A, DT.08.08.2005.
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Varangaon
Name
Specification
Use
Status
1) EXPANDED POLYSTYRENE FOAM 275MM[99]()
Specification : SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG. PER CUBIC METER TO SPECN: IS-4671-1984(FIRST REVISION) REAFFIRMED 1995 SIZE:275MMx 142MMx 12(-) 1 MM TYPE 2
E
Estab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Varangaon
Name
Specification
Use
Status
1) EXPANDED POLYSTYRENE FOAM 265mm[99]()
Specification : SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG PER CUBIC METER TO SPECN: IS-4671-1984(FIRST REVISION) REAFFIRMED 1995 SIZE:265MMx 146MMx 12(-) 1 MM
E
Estab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Varangaon
Name
Specification
Use
Status
1) EXPANDED POLYSTYRENE FOAM 146mm[21]()
Specification : TYPE 2 SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG PER CUBIC METER TO SPECIFICATION IS:4671-1984(FIRST REVISION), REAFFIRMED 1995, SIZE:146MMx 120MMx 12MM
E
Estab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PLASTIC CONTAINER TO DRG NO FS 2368C FOR 84 MM TPT PROJECTILE[00]()
Specification : DRG NO FS 2368C
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) TRANSIT PLUG TO CQA AMMN DRG NO 155 1065[00]()
Specification : TRANSIT PLUG TO CQA(AMMN)DRG.NO.155-1065,DC 36792-A DT. 01-11-01.
Specification : HORIZONTAL GIDANCE POWER SUPPLY AS PER SPECN. NO. 7084.32.06.100
C
Estab
6) PCB CONTROL MODULE (LF NO. 7441121236)[74]()
Specification : PCB CONTROL MODULE AS PER DRG. NO. 7084.32.03.100
C
Estab
Category : p
Grade : Grade I
Size :
S
386
ARROW PRECIFORM COMPANY
B 17/1 & B 18, IDA GANDHINAGAR, KUKATPALLY IDA GANDHINAGAR HYDERABAD Telangana
PIN1 : 500037
Phone No. : 23070306 GSTIN :
36AASFA0563A1ZR
1) TUBELESS TYRE WITH RUNFLAT SYSTEM & WHEEL RIM FOR MPV[90]()
Specification : TUBELESS TYRE WITH RUNFLAT SYSTEM & WHEEL RIM AS PER SPECIFICATION NO. VFJ/SP/TSS/RFS/01/MPV (ARMY & MHA)/ AMENDMENT NO. 10 DATED 10-07-2015
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) TUBELESS TYRE WITH RUNFLAT SYSTEM & WHEEL RIM FOR MPV[90]()
Specification : TUBELESS TYRE WITH RUNFLAT SYSTEM & WHEEL RIM AS PER SPECIFICATION NO. VFJ/SP/TSS/RFS/01/MPV (ARMY & MHA)/ AMENDMENT NO. 10 DATED 10-07-2015
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Run Flat System for Bullet Proofing of SML LF no 9413100008000[90]()
1) DESIGN DEVELOPMENT MANUFACTURING SUPPLY AND PROVING OF ASSEMBLY STAND FOR MODIFIED ELEVATING GEAR BOX ASSEMBLY TO DRG NO DW 1070 1000 10
Description : DESIGN DEVELOPMENT MANUFACTURING SUPPLY AND PROVING OF ASSEMBLY STAND FOR MODIFIED ELEVATING GEAR BOX ASSEMBLY TO DRG NO DW 1070 1000 10()
Specification : AS PER DRG NO DW 1070 1000 10
R
Estab
2) ASSEMBLY STAND FOR WHEEL CARRIAGE ASSEMBLY DHANUSH 155 MM AS PER MPF SKETCH NO DHANUSH WC ASSY STAND 01 LF NO 7110306062
Description : ASSEMBLY STAND FOR WHEEL CARRIAGE ASSEMBLY DHANUSH 155 MM AS PER MPF SKETCH NO DHANUSH WC ASSY STAND 01 LF NO 7110306062()
Specification : AS PER MPF SKETCH NO DHANUSH WC ASSY STAND 01 LF NO 7110306062
R
Estab
Category : p
Grade : 3
Size :
S
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 7119033641 BODY[71]()
Specification : BODY TO DER NO 175-47-014-A
C
Nonestab
Category :
Grade : Grade III
Size :
S
392
M.S.Textiles as the Selling Agent of M/s.R.S.R.Mohota Spg. & Wvg. Mills Ltd,
3AA Edena, 3rd Floor, 97, M.K.Road, Mumbai Maharastra
PIN1 : 400020
Phone No. : 022-22003262 GSTIN :
27AAACT4122H1ZM
1) GUARD HAND RIGHT for LMG
Description : GUARD HAND RIGHT for LMG()
Specification : GUARD HAND RIGHT SK-3145/23 GUARD HAND RIGHT TO DRG NO.AR DE SK-3145/23 IN F/D CONDN DC(I) NO 25916 SA DT 07/04/2004 (IN LEAF BROWN COLOUR)
C
Estab
2) GUARD HAND LEFT for LMG
Description : GUARD HAND LEFT for LMG()
Specification : GUARD HAND LEFT SK-3145/24. GUARD HAND LEFT TO DRG ARDE SK-3145/24 IN F/D CONDN.
DC(I) NO 25916SA DT 07/04/04.(IN LEAF BROWN COLOUR)
Specification : BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.
R
Nonestab
2) copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020
Description : copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020()
Specification : COPPER STRIP 20+/_ 0.2 X 0 75 + 0 02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN BS EN 1652
R
Nonestab
3) ALU ALLOY ROD 31 75MM IS733 64430 W LF 0611503032
Description : ALU ALLOY ROD 31 75MM IS733 64430 W LF 0611503032()
Specification : ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 "W" CONDITION.
Specification : NICKEL PURE AS PER SPECIFICATION IS-2782 1964 GRADE-II SIZE ] [CHARGEABLE PLATE OF MAX. 100 MM SQ OR
["NICKEL PURE IN "PLATE" FROM TO SIZE 100 MM X 6
R
Nonestab
2) ALUMINIUM PURE INGOT (0615186000)[06]()
Specification : ALUMINIUM PURE INGOT 99% PURE TO SPECIFICATION IS-617-1994 [DESIGNATION 1900 WEIGHT OF INGOT -ONE KG APPROXIMATE
[ OR ]
[PRIMARY ALUMINIUM INGOTS WITH MINIMU
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0133030151 MILD STEEL PLATE AS PER SPECN NO BS970 GREN3[01]()
Specification : MILD STEEL PLATE SIZE 1830X 1830 X 25 MM THICK AS PER SPECN. NO. BS970 GREN3
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0717592172 STRIP BRASS 0.56 MM TH X13.5 MM WID[07]()
Specification : SPECN. NO. JSS-9535-2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0700191388 STRIP COPPER 72MM W[07]()
Specification : COPPER STRIP TO BS 2870-1980 GRADE C-101, C-102, C-104 0RC-106. ANNEALED.HARDNESS 60 HV. SIZE 72 MM +/- 0.3MM WIDE X0.813 MM TOLERANCE +/- 0.13 MM THICK. COILED
R
Nonestab
2) 0700161382 STRIP COPPER[07]()
Specification : COPPER STRIP TO BS 2870-1980 GRADE C-101, C-102,C-104, C-105,C-106, C-107 ANNEALED. HARDNESS 60 HV. SIZE 62 MM WIDE X1.27 MM THICK COILED.
R
Nonestab
3) 0615458005 STRIP ALUMINIUM 130MM[06]()
Specification : ALUMINIUM ALLOY STRIP, SIZE:130 MM PLUS MINUS 0.5 MM WIDE X0.5 MM PLUS MINUS 0.02 MM THICK TO SPECIFICATION IS:737-2008 (FOURTH REVISION) GRADE 19500 IN CONDITION HX4.
R
Nonestab
4) 0700261021 STRIP CU ALLOY[07]()
Specification : STRIP COPPER ALLOY SIZE 15 PLUS MINUS 0.2 MM WIDE X 0.16PLUS MINUS 0.01 MM THICK ANNEALED IN COIL FORM AND LENGTHOF COIL 40 MTRS. SPECN IS 14811 : 2000.
R
Nonestab
5) 0700691107 STRIP COPPER[07]()
Specification : STRIP COPPER ALLOY,SIZE 25 PLUS MINUS 0.20 MM WIDE X0.07 MINUS 0.02 MM THICK TO SPECIFICATION BS 2870-1980,C-106WITH HARDNESS 70 TO 90 VPN.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0120002100 SHEET STEEL SIZE 2 MM THICK[01]()
Specification : SHEET STEEL, SIZE :-1830 MM LONG X 915 M WIDE X 2 MM THICKTO SPECN IS:513-1994 GRADE D.
R
Nonestab
2) 0133021020 SHEET M S[01]()
Specification : SHEET MILD STEEL,SIZE: 2 MM THICK X 1830 MM LONG X 915 WIDE.IS - 1079-1994,GRADE "O"
R
Nonestab
3) 0133021025 SHEET STEEL[01]()
Specification : SHEET STEEL,SIZE 3000 MM LONG X 1000 MM WIDE X 2.5 MM THICKTO SPECN.IS: 513 -1994, GRADE "D"
R
Nonestab
4) 0134071134 SHEET STEEL SIZE[01]()
Specification : SHEET STEEL SIZE 1830 MM LONG X 915 MM WIDE X 1.6 MM THICKTO SPECN IS 513 1986 GRADE D
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6334100726 STAINLESS STEE NUT M4 FOR PINKA RKT[63]()
Specification : IS-1367
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0700660066 STRIP COPPER[07]()
Specification : TRIP COPPER SIZE-105MM +2MM WIDE X0.4 +/- 0.03MM THICK TO SPECN:B-2870-C-101 OR C-102
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0133030112 MS PLATE SIZE 1100[01]()
Specification : MS PLATE OF SIZE-1100 X 100 X 10MM (IS 2062-1994 OF ANYGRADE)
C
Nonestab
2) 0133030115 MS PLATE SIZE 400[01]()
Specification : MS PLATE OF SIZE 400 X 200 X 6MM (IS 2062-1994 OF ANYGRADE)
C
Nonestab
3) 0133030113 MS PLATE SIZE 450 MM[01]()
Specification : MS PLATE OF SIZE 450 X 450 X 50MM (IS-2062-1994 OF ANYGRADE)
C
Nonestab
4) 0133030120 MS ROD SIZE 50MM DIA 100MM LENGTH[01]()
Specification : MS ROD OF SIZE 50MM DIA X 100MM LENGTH (IS-2062-1994 OF ANYGRADE)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0615466055 STRIP AL[06]()
Specification : STRIP ALUMINIUM ALLOY SIZE 12 PLUS MINUS 0.2 MM WIDE X0.38 PLUS MINUS 0.02 MM THICK TO SPECN IS 737 - 1986GRADE-19000 CONDITION H4
R
Nonestab
2) 0615461060 STRIP AL[06]()
Specification : STRIP ALUMINIUM SIZE 18 PLUS MINUS 0.2 MM WIDE X 0.6 PLUSMINUS 0.02 MM THICK TO SPECN.IS-737-1986 GRADE 53000 IN "O"CONDITION.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1579451003 STEEL STRIP[15]()
Specification : STEEL SHEET STRIP 3.175MM THICK ( 8 feet X 4 feet ) DRG NO. . LEG ASSY ITX 46 SA - PART NO. LEG ITX 242 & BRACKET ITX 243 DC NO. 35824-A DATED 16-04-2002
R
Nonestab
2) 0615246061 ALUMINIUM STRIP SHEET[06]()
Specification : ALUMINIUM STRIP SIZE :68 +/- 0.2 MM WIDE X 06 +/- 0.02 MM THICK WITH BOW CONDITION @ MAX 2.54 MM PER METER LENGTH OF COIL SPECN. IS 737 LATEST ( DESIGN : 19500 COND.0' ) HEMRL /IGN/PS/420 DTD. 13-06-2019
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6333501102 MS TARGET PLATE[63]()
Specification : MS TARGET PLATE THICKNESS 5 MM AS PER OFCH DRG. NO. OFCH/PR/236
R
Nonestab
2) 6333501101 MS TARGET PLATE[63]()
Specification : MS TARGET PLATE THICKNESS 1.5 MM AS PER OFCH DRG. NO. OFCH/PR/235
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0800520002 SHEET LEAD 2440MMX1220MMX2MM THICK.[08]()
1) 0615400022 ALUMINIUM AALLOY ROD SIZE 22 MM DIA[06]()
Specification : IS:733-1983
R
Nonestab
2) 0717591247 STRIP BRASS 60 MM WID[07]()
Specification : JSS 9535-02:2008
R
Nonestab
3) 0717590946 STRIP BRASS 83 MM WIDE[07]()
Specification : JSS 9535 - 2
R
Nonestab
4) 0710660222 STRIP BRASS 69 MM W[07]()
Specification : JSS-9535-02:2008
R
Nonestab
5) 0712568007 STRIP BRASS[07]()
Specification : IS-410-1977
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0700160045 CU ALLOY STRIP 45MM WIDE 2MM TH[07]()
Specification : COPPER ALLOY STRIP SIZE 45 +/-0.5 MM WIDE X 2 +/-0.1 MM TH. TO SPECIFICATION NO. BS EN 1652:1997. SYMBOL CUZN10. NUMBER CW 501L WITH MATERIAL CONDITION H110, HARDNESS 110-130 HV.REQUIRED FOR TRACER NO.12 OF SHELL 125MM HEAT.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) ST SQR 125MM IS 5517-78,40NI6C[70]()
Specification : ST SQR 125MM IS 5517-78,40NI6C
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL SHEET SIZE 4.00 MM +0.30 MM X 1000 MM X 2500 MM LENGTH TO SPECIFICATION IS:2062 - 2011 GRADE E 350A[70]()
Specification : SPECIFICATION IS:2062 - 2011 GRADE E 350A
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STRUCTURAL STEEL BAR ROUND 10 MM DIA X 6 MTR LENGTH TO SPECN IS 2062 1992 GD B DESIGNATION Fe 410 WB[70]()
Specification : STRUCTURAL STEEL BAR ROUND 10 MM DIA X 6 MTR. LENGTH TO SPECN IS:2062-1992 GD-B DESIGNATION Fe 410 WB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 0720300095 PB ROUND 95MM DIA STD LENGTH TOM SPECIFICATION IS 7811 1985[70]()
Specification : 0720300095 P.B.ROUND 95MM DIA STD.LENGTH TOM SPECN: IS: 7811-1985.
R
Estab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 0720201038 PB ROUND 38 MM DIA IN STD LENGTH TO SPECN IS 7811 1985[70]()
Specification : 0720201038 PB.ROUND 38.00 MM DIA IN STD.LENGTH TO SPECN.IS:7811-1985
R
Estab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) AL PLATE 2MM THICK IS:737-08,52000[70]()
Specification : AL PLATE 2MM THICK IS:737-08,52000
R
Nonestab
2) AL RD 95MM DIA IS:733-1983, 76528 WP[70]()
Specification : AL RD 95MM DIA IS:733-1983, 76528 WP
R
Nonestab
3) AL FLAT 130X100MM IS:733-1983,76528[70]()
Specification : AL FLAT 130X100MM IS:733-1983,76528
R
Nonestab
4) AL ANGLE 60X40X5 IS733-83,64430 WP[70]()
Specification : AL ANGLE 60X40X5 IS733-83,64430 WP
R
Nonestab
5) AL FLAT 120X85MM IS:733-1983,76528[70]()
Specification : AL FLAT 120X85MM IS:733-1983,76528
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL FLAT SIZE 100 MM X 55 MM X 2.5 METER LENGTH OR ITS MULTIPLE TO IS:5517-1993, DESIGN. 42CR4M02, LRS 100[70]()
Specification : STEEL FLAT SIZE 100 MM X 55 MM X 2.5 METER LENGTH OR ITS MULTIPLE TO IS:5517-1993, DESIGN. 42CR4M02, LRS 100
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL SHEET 1.00 MM THICK X (1000 X 2500 MM LONG) TO SPECN IS:5986-2002 GD Fe 410 HOT ROLLED & ANNEALED OR IS:2062-19999 GD Fe410WA OR IS 1079-1988 GD ST42[70]()
Specification : STEEL SHEET 1.00 MM THICK X (1000 X 2500 MM LONG) TO SPECN IS:5986-2002 GD Fe 410 HOT ROLLED & ANNEALED OR IS:2062-19999 GD Fe410WA OR IS 1079-1988 GD ST42
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 0725177160 PB HOLLOW BAR 160 MM[90]()
Specification : PB HOLLOW BAR O/S DIA 160 MM X I/D DIA 110 MM TO SPECN. IS:28-1985 GRADE 2
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) COPPER ALLOY BAR TO SIZE 60MM DIA X 1500MM OR MULTIPLES IN LENGTH TO SPECN BS 2874 86 Gde CA 104[70]()
Specification : COPPER ALLOY BAR TO SIZE 60MM DIA X 1500MM OR MULTIPLES IN LENGTH TO SPECN BS 2874 86 Gde CA 104
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) COPPER ALLOY BAR TO SIZE 60MM DIA X 1500MM OR MULTIPLES IN LENGTH TO SPECN BS 2874 86 Gde CA 104[70]()
Specification : COPPER ALLOY BAR TO SIZE 60MM DIA X 1500MM OR MULTIPLES IN LENGTH TO SPECN BS 2874 86 Gde CA 104
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 0720201038 PB ROUND 38 MM DIA IN STD LENGTH TO SPECN IS 7811 1985[70]()
Specification : 0720201038 PB.ROUND 38.00 MM DIA IN STD.LENGTH TO SPECN.IS:7811-1985
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL SHEET SIZE 1 25 MM THICK X 900 MM WIDTH X 2500 MM LENGTH TO SPECN IS 513 1994 COLD ROLLED AND ANNEALED TYPE D BEST SURFACE[70]()
Specification : STEEL SHEET SIZE 1.25 MM THICK X 900 MM WIDTH X 2500 MM LENGTH TO SPECN IS:513-1994 COLD ROLLED AND ANNEALED TYPE 'D' BEST SURFACE
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STAINLESS STEEL TUBE 125X100X830MM[70]()
Specification : STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 -
MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM
LONG TO SPECN: AISI-316.OR,AISI-304.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) ALUMINIUM PLATE 6061 T651 PER AMS QQ A 250 11 size 32T X 406W X 406L MM ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED[06]()
Specification : ALUMINIUM PLATE 6061-T651 PER AMS QQ-A-250/11 size: 32T X 406W X 406L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED
R
Nonestab
2) ALUMINIUM ALLOY PLATE 6061 T6 OR T651 PER QQ A 250 11 size 60T X 100W X 410L MM ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED[06]()
Specification : ALUMINIUM ALLOY PLATE 6061- T6 OR T651 PER QQ-A-250/11 size: 60T X 100W X 410L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED.
R
Nonestab
3) ALUMINIUM PLATE 6061 T651 PER AMS QQ A 250 11 TO SIZE 127MM THICK X 340MM WIDTH X 445MM LENGTH IMPORTANT NOTE ASSURE THAT GRAINS ARE IN LONGITUDINAL ORIENTATION For CRADLE MOBILE AND CRADLE BASE OF SRCG ALL RELEVANT TEST CERTIFICATES FROM NABL LAB[06]()
Specification : ALUMINIUM PLATE 6061-T651 PER AMS QQ-A-250/11 TO SIZE 127MM THICK X 340MM WIDTH X 445MM LENGTH. IMPORTANT NOTE ASSURE THAT GRAINS ARE IN LONGITUDINAL ORIENTATION. For CRADLE MOBILE AND CRADLE BASE OF SRCG. ALL RELEVANT TEST CERTIFICATES F
R
Nonestab
4) STAINLESS STEEL PLATE 316 PER ASTM A 240 PLATE SIZE 56 TX 90L X 110 W IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG[03]()
Specification : STAINLESS STEEL PLATE 316 PER ASTM A 240. PLATE SIZE 56 TX 90L X 110W (IN MM) ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG
R
Nonestab
5) ALUMINIUM ALLOY BAR TYPE 6061 T6 PER QQ A 225 8 OR T651 SIZE DIA100 X 144L MM ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED[06]()
Specification : ALUMINIUM ALLOY BAR TYPE 6061-T6 PER QQ-A-225/8 OR T651 SIZE: DIA100 X 144L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED
R
Nonestab
6) CRES PLATE 316 PER ASTM A 240 SIZE20TX25WX90L IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED[03]()
Specification : CRES PLATE 316 PER ASTM-A-240. SIZE:20TX25WX90L (IN MM). ALL RELEVANT TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED.
R
Nonestab
7) ALUMINIUM PLATE 6061 T651 PER AMS QQ A 250 11 TO SIZE 127MM THICK X 340MM WIDTH X 445MM LENGTH IMPORTANT NOTE ASSURE THAT GRAINS ARE IN LONGITUDINAL ORIENTATION For CRADLE MOBILE AND CRADLE BASE OF SRCG[06]()
Specification : ALUMINIUM PLATE 6061-T651 PER AMS QQ-A-250/11 TO SIZE 127MM THICK X 340MM WIDTH X 445MM LENGTH. IMPORTANT NOTE ASSURE THAT GRAINS ARE IN LONGITUDINAL ORIENTATION. For CRADLE MOBILE AND CRADLE BASE OF SRCG
R
Nonestab
8) CRES ROD 304L PER ASTM A 276 ROD DIA 14MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED[03]()
Specification : CRES ROD 304L PER ASTM-A-276. ROD DIA 14MM. ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Al alloy rod 35mm ENAW7075 T6 LF 0611505135
Description : Al alloy rod 35mm ENAW7075 T6 LF 0611505135()
Specification : Al alloy rod 35+/- 0.3mm in std. length of 2.0 to 3.0 meter to specification EN AW 7075-T6
R
Nonestab
Category : s
Grade : 3
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION[07]()
Specification : BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION.
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Aluminium tube 80 5 x 60mm LF 0611558860
Description : Aluminium tube 80 5 x 60mm LF 0611558860()
Specification : Aluminium tube 80.5 x 60mm LF 0611558860
Specification : TUBING BRASS SEAMLESS 22.35+0.00/-0.15 MM OUTSIDE DIA X 16.70+0.10/-0.00MM INSIDE DIA WALL THICKNESS NOT LESS THAN 2.60MMIN THE STRAIGHT LENGHT OF 324+/-2.0 MM MATERIAL COMPOSITIONAS PER SPECN.BS-2871 PT-2 1972 CZ -126 M CONDITION.(STRESS
R
Nonestab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Brass rod 8 5mm bs 2874 cz129 m LF 0741100004
Description : Brass rod 8 5mm bs 2874 cz129 m LF 0741100004()
Specification : Brass rod 8 5mm(-0.050)mm Dia in straight length of 3.0meter(-0.2m max) to specn:BS-2874-CZ-129 cond. 'M' circular ovality 0.020mm max; straightness 01mm in 01 meter & rod should be packed in a suitable box to prevent bending during trans
