5) Three Layer Water Proof Breathable Fabric Dual Shade OG/White 118 cm()
As per specification & Requirement
R
Non Established
6) Fabric Nylon 75 GSM White PU Coated 152 cms()
Scheduled No IND/TC/0157 Firm trade mark in abbreviated form in smallest possible letter to be printed on the uncoated side of the fabric along selvedge at an interval of one metre. The height of letter should not exceed 8 mm. Dark/Bright colou
Specification : Prov.Specn.No. ADRDE/SPECN.1983/14(except Air porosity Test)
E
Estab
Category : DDP
Grade : II
Size :
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) 100 Percent Nylon PU coated water proof and wind proof breathable plain weave fabric 100 GSM OG width 150 cm min[21]()
Specification : 100% Nylon PU coated water proof and wind proof breathable plain weave fabric 100 GSM OG width 150 cm (min.)
Specn:- Appendix "A" of Provisional Specification No. OCFS/039/Jacket ECC Two Layer
Specification : 100% POLYESTER MICROFILAMENT WOVEN FABRIC JUNGLE GREEN 70 GSM WIDTH 150CM MIN.
APPENDIX 'B' OF PROVISIONAL SPECIFICATION NO. OCFS/039/JACKET ECC TWO LAYER
R
Estab
3) 100 Percent Nylon micro filament woven Rip stop fabric olive green 50 GSM width 150 cm min[21]()
Specification : 100% Nylon micro filament woven Rip stop fabric olive green 50 GSM width 150 cm (min.)
Specn:- Appendix "C" of Provisional Specification No. OCFS/039/Jacket ECC Two Layer
R
Estab
Category :
Grade : Grade III
Size :
M
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabric Nylon 220 GSM White Water and Oil repellent 100 cm[21]()
Specification : Fabric Nylon 220 GSM White Water and Oil repellent 100 cm. Specification No.IND/TC/0160 EXCEPT TEST PARAMETERS Water Vapour Transmission and Air permeability not to be tested.
Specification : FABRIC POLYESTER WHITE (WIND CHEATER) 115 GSM WIDTH 150CM (MIN.) PANTONE SHADE NO. 11-0602 TPX
SPECIFICATION:- AS PER APPENDIX 'A' OF PROVISIONAL SPECIFICATION N. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6
R
Estab
3) OUTER SHELL FABRIC OUTER JACKET NYLON 95 GSM LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE WIDTH 150CM MIN PANTONE SHADE NO 19 0511 TPX[21]()
Specification : OUTER SHELL FABRIC (OUTER JACKET) NYLON, LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE, 95 GSM, WIDTH 150CM (MIN.) PANTONE SHADE NO. - 19-0511 TPX.
SPECIFICATION:- AS PER APPENDIX 'B' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT
R
Estab
4) OUTER AND INNER SHELL NYLON FABRIC INNER JACKET NYLON 60 GSM WIDTH 150 CM MIN PANTONE SHADE NO 19 0511 TPX[21]()
Specification : OUTER AND INNER SHELL NYLON FABRIC (INNER JACKET) NYLON 60 GSM WIDTH 150 CM (MIN.) PANTONE SHADE NO. - 19-0511 TPX
SPECIFICATION :- AS PER APPENDIX 'E' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6
R
Estab
Category :
Grade : Grade III
Size :
M
1Ordnance Equipment Factory
Name
Specification
Use
Status
1) DRILL COTTON PROOFED WHITE (BLEACHED ) 71 CM[21]()
Specification : IND/TC/097 (c)
R
Estab
Category :
Grade : Grade III
Size :
M
1Ordnance Equipment Factory
Name
Specification
Use
Status
1) FABRIC NYLON TAFFETA 85 GSM WATER RESISTANT 155 CMS WIDE NAVY BLUE[21]()
Specification : AS PER TABLE-1 OF SPECN.NO. AIR HQ/JDQAS/OK-004
Specification : CROME PLATED DE SPANNER 8X9 EVEREST/TAAPARIA/GEDORE/JHALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700111-V3.
C
Nonestab
2) Cr PLTD DE SPANNER 14X15[90]()
Specification : CROME PLATED DE SPANNER 14X15 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700211-V4
C
Nonestab
3) NIC CROME PLATED RING SPA10X11[90]()
Specification : CROME PLATED RING SPANNER 10X11 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/ BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.F4735500-V2
C
Nonestab
4) CROME PLATED DE SPANNER 25X28[90]()
Specification : CROME PLATED DE SPANNER 25X28 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A -SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.X4700611-V4 DRG. NO. X4700211-V4
C
Nonestab
5) CROME PLATED SCREW DRIVER 8 inch[90]()
Specification : CROME PLATED SCREW DRIVER 8"(200mm 1.6X10 mm) EVEREST/TAAPAR IA/AMBIKA TOOLS/GEDORE/JHALANI/JK/JHALANI EXPERT/BETA/VENUS MAKE AS PER IS:844 (PART-II)MADE OF CHROME VANADIUM STEEL.
C
Nonestab
6) Cr PLTD DE SPANNER 12 X 13 mm[90]()
Specification : CROME PLATED DE SPANNER 12 X 13 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS:2028-A-SERIES-C MADE OF CROME VANADIUM STEEL.
C
Nonestab
7) CR PL HEX SOC SCREW KEY 6 MM[90]()
Specification : CROME PLAED/BLACK FINISH HEXAGON SOCKET SCREW KEY 6 MM EVERE ST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS /JHALANI/JHALANI EXPER /JK/ BETA MAME ASPER IS:3082 MADE OF CROME VANADIUM STEEL.
C
Nonestab
8) CR PL HEX SOC SCREW KEY 10 MM[90]()
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 10 MM EVEREST/TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/ VENUS/ JK/BETA MAKE AS PER IS:3082 MADE OF CROME VANADIUM STEEL.
C
Nonestab
9) Cr PLTD DE SPANNER 24X26[90]()
Specification : CROME PLATED DE SPANNER 24X26 mm EVEREST/TAAPARIA/GEDORE/JHA LANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS:2028 -A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X 4700511-V3.
C
Nonestab
10) NIC CROME PLATED RING SPA18X19[90]()
Specification : CROME PLATED RING SPANNER 18X19 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKAA/VENUS TOOLS MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. DRG.NO.X4704011-V2
C
Nonestab
11) CROME PLATED DE SPANNER 21X23[90]()
Specification : CROME PLATED DE SPANNER 21X23mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS:2028- A-SERIES-C MADE OF CROME VANADIUM STEEL.
C
Nonestab
12) Cr PLTD DE SPANNER 16 X 17[90]()
Specification : CROME PLATED DE SPANNER 16 X 17 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/MAKE AS PER IS 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4734911-V3.
C
Nonestab
13) NIC CROME PLATED RING SPA19X22[90]()
Specification : CROME PLATED RING SPANNER 19X22 mm EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/J K/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4701011-V2.
C
Nonestab
14) CROME PLATED DE SPANNER 24X27[90]()
Specification : CROME PLATED DE SPANNER 24X27mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE ACCEPTABL E AS PER IS-2028-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO- X4700411-V3.
C
Nonestab
15) NIC CROME PLATED RING SPA24X27[90]()
Specification : CROME PLATED RING SPANNER 24X27 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER -IS:2029-1998-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO.X4701111-V2.
C
Nonestab
16) NIC CROME PLATED RING SPA14X15[90]()
Specification : CROME PLATED RING SPANNER 14X15 MM EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700911-V2.
C
Nonestab
17) Cr PLTD DE SPANNER 19X22[90]()
Specification : CROME PLATED DE SPANNER 19X22 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. X4700311-V4 DRG.NO. X4700211-V4.
C
Nonestab
18) CR PL HEX SOC SCREW KEY 12 MM[90]()
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 12MM EVER EST /TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/JK/ BETA/VENUS/ MAKE AS PER IS:3082-MADE OF CHROME VANADIUM STEEL. PART NO. X4700711-V2.
C
Nonestab
19) NIC CROME PLATED RING SPA16X17[90]()
Specification : CROME PLATED RING SPANNER 16X17 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4735211 V2.
C
Nonestab
20) NIC CROME PLATED RING SPA12X13[90]()
Specification : CROME PLATED RING SPANNER 12X13 MM EVEREST/TAAPARIA/GEDORE/J HALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700811-V2.
C
Nonestab
21) DE SPANNER SAE 5 by 8 inch X 9 by 16 inch[90]()
Specification : CHROME PLATED - DE SPANNER SAE 5/8" X 9/16" (A/F S1 - 0.629" / 0.633" X S2 - 0.566" / 0.570"), OVERALL LENGTH 150MM MIN. MAKE - EVEREST/TAPARIA/AMBIKA TOOLS/JHALANI EXPERT/JK/BETA /GEDORE/JHALANI/VENUS/ , MADE OF CHROME VANADIUM STEEL,OTH
Specification : CROME PLATED SCREW DRIVER 12"(300 mm)X2.0mm X13 mm EVEREST/T AAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/JHALANI EXPE RT/VENUS MAKE AS PER IS:844 (PART-II) MADE OF CHROME VANADIUM STEEL.
C
Nonestab
25) CR PLATED SCREW DRIVER PHILIPS[90]()
Specification : CROME PLATED SCREW DRIVER PHILIPS 100LG 6 DIA TIP NO-2 EVEREST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS/JHALANI/JK/BETA/ JHALANI EXPERT MAKE MADE OF CROME VANADIUM STEEL.
C
Nonestab
26) CR PL BALL PEIN HAMMER160Z by 500[90]()
Specification : BALL PEIN HAMMER 160Z/500 GMS EVEREST/ TAAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/VENUS/ JHALANI EXPORT MAKE AS PER IS:841 MADE OF CHROME VANADIUM STEEL.PART NO.F4730200-V1.
C
Nonestab
27) VEHICLE LOG BOOK 135MM X 200MM[90]()
Specification : VEHICLE LOG BOOK SIZE 135MM X 200MM (75 GSM THICK) WITH 100 PAGES ON THE BOTH THE SIDE PRINTED (BLACK & WHITE) WITH HARD COVER (LAMINATED).
C
Nonestab
28) USERS HAND BOOK FOR STALLION[90]()
Specification : USER'S HAND BOOK FOR STALLION USER'S HAND BOOK FOR STALLION 4X4 MK-IV(BS-III) H-SERIES ENG INE WITH INLINE FIP IN ENGLISH AS PER VFJ SPECN NO.VFJ SPEC/ 02/STLN/UHB/16/IFIP
C
Nonestab
29) LEVER TYPE GREASE GUN 500 CC[90]()
Specification : LEVER TYPE GREASE GUN (500 CC) DRG./PART NO.F-4735900 A
C
Nonestab
30) BKT REVERSE BEEPER[90]()
Specification : BKT. REVERSE BEEPER, PART NO./DRG NO. F7195914 A
C
Nonestab
31) Paint Primer Red Oxide for Stallion vehicle[90]()
Specification : As per specification / drg.
C
Nonestab
32) Paint Signal Red Colour 537[90]()
Specification : As per specification / drg.
C
Nonestab
33) Paint Black[90]()
Specification : AS per specification / drg
C
Nonestab
34) HYDRAULIC JACK[90]()
Specification : HYDRAULIC JACK DRG./PART NO.X-7451300-V3A-1-01-CV3NO-38
2) Three Layer Water Proof Breathable Fabric Dual Shade OG/White 118 cm()
As Per Appendix A of Prov. Specification No. IND/TC/4587 (C) And Annexure B Attached
R
Established
Category : DDP
Grade : I
Size :
M
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabric Nylon Knitted Aluminsed 100cm[21]()
Specification : DMSRDE/TEX-2/93/2
R
Estab
2) Three Layer Water Proof Breathable Fabric Dual Shade OG/White 118 cm[21]()
Specification : As per specification & Requirement
R
Estab
3) FABRIC NYLON 75 GSM WHITE PU COATED 152 CMS (MINIMUM)[21]()
Specification : IND/TC/0157 FIRM TRADE MARK IN ABBREVIATED FORM IN SMALLEST POSSIBLE LETTER TO BE PRINTED ON THE UNCOATED SIDE OF THE FABRIC ALONGSELVEDGE AT AN INTERVAL OF ONE METER. THE HEIGHT OF LETTERSHOULD NOT EXCEED 8MM. DARK/BRIGHT COLOUR TO BE AVO
R
Nonestab
Category : DDP
Grade : I
Size :
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) PU Coated Nylon Fabric 105 gms/ 75 gms (white)()
Specification : FABRIC POLYESTER WHITE (WIND CHEATER) 115 GSM WIDTH 150CM (MIN.) PANTONE SHADE NO. 11-0602 TPX
SPECIFICATION:- AS PER APPENDIX 'A' OF PROVISIONAL SPECIFICATION N. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6
R
Estab
2) OUTER SHELL FABRIC OUTER JACKET NYLON 95 GSM LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE WIDTH 150CM MIN PANTONE SHADE NO 19 0511 TPX[21]()
Specification : OUTER SHELL FABRIC (OUTER JACKET) NYLON, LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE, 95 GSM, WIDTH 150CM (MIN.) PANTONE SHADE NO. - 19-0511 TPX.
SPECIFICATION:- AS PER APPENDIX 'B' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT
R
Estab
Category :
Grade : Grade III
Size :
M
1Gun Carriage Factory
Name
Specification
Use
Status
1) Multi Spectral camouflage Equipment to Art No 1155287D[90]()
Specification : MULTI SPECTRAL CAMOUFLAGE EQUIPMENT TO ART.NO.1155287D
COMPRISING OF FOLLOWING ITEMS:-(1)MSCN"PARASOL" OF DIA 2.2m
(OUTSIDE GREEN PRINTED),QTY-10NOS(2)MSCN PARASOL OF DIA 2.2m
(OUTSIDE DESERT PRINTED),Q
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) PU Coated Nylon Fabric in Camouflage Design 150 cm Excluding Selvedges[21]()
Specification : AS PER ENCLOSED SPECIFICATION
R
Nonestab
2) Camouflage Cloth Commercial Polyester 600 D PVC / PU Coated 150 CM Excluding Selvedges[21]()
Specification : AS PER ENCLOSED SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN[21]()
Specification : FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN.
SPECIFICATION:- JSS 8305-32-2003
R
Estab
Category :
Grade : Grade III
Size :
M
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9081008426 HEATING BLANKET FOR DHANUSH TO DOCUMENT NO GCF 50 41169[90]()
Specification : HEATING BLANKET FOR 'DHANUSH' TO DOCUMENT NO.GCF/50/41169.
Specification : Portable Nitrogen Purging Kit as per Drg. CWC-252/39 (02 sheets)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) OLED WITH DRIVER BOARD RESOLUTION GREATERTHAN OR EQUAL TO 640 X 480 COLOURED B W[15]()
Specification : OLED WITH DRIVER BOARD,RESOLUTION GREATERTHAN OR EQUAL TO 640 X 480,COLOURED/(B/W), PIXEL SIZELESS THAN OR EQUAL TO 15 MICRON,OPERATINGTEMPERATURE RANGE GREATER THAN OR EQUAL TO(-20 DEGREE CELSIUS TO +50 DEGREE CELSIUS),ANALOG INPUT,POWER
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) PCB POWER SUPPLY CARD AS PER ATTACHED SPECIFICATION 27[15]()
Specification : PCB POWER SUPPLY CARD AS PER ATTACHED SPECIFICATION 27
C
Nonestab
2) PCB FOR PNV MONOCULAR[74]()
Specification : PCB FOR PNV MONOCULAR(TWO STAGE REGULATED POWER SUPPLY WITH LOW BATTERY VOLTAGE INDICATION OUTPUT POINTS), DETAILS AS PER DRAWING NO.: MCT-3497 NOTE: SAMPLE MUST BE PROVIDED BEFORE BULK SUPPLY.
C
Nonestab
3) CHARGING CABLE 12V DC[15]()
Specification : CHARGING CABLE 12V DC CONSISTING OF WIRE 3.5 SQ.MM, 1 METER LENGTH(RED & BLACK),2 NOS.OF CROCODILE CLIPS (RED & BLACK INDICATION) & 12V DC JACK. (SAMPLE MUST BE APPROVED BEFORE BULK SUPPLY)
C
Nonestab
4) DC ADOPTER FOR BATTERY CHARGER FOR VARIOUS SPECIFICATION[74]()
Specification : DC ADOPTER FOR BATTERY CHARGER 18650:- DC CONVERTER WITH INPUT CONNECTOR-CROCODILE CLIPS FOR DIRECT ATTACHMENT TO BATTERY,INPUT VOLTAGE-12-36 VOLT DC,INPUT WIRE LENGTH-1 METER, OUTPUT CONNECTOR- MICRO USB, OUTPUT ELECTRICAL SPECS-5 VOLT D
1) 6356000017 LLDPE PACKAGE BOX FOR INFLUENCE MINE MK II EMPTY ASSEMBLY TO ARDE DRG NO 9707 00 04 00 00 000 00TA AS PER QAP NO NFM IMMK II PKG 02[63]()
Specification : LLDPE PACKAGE BOX FOR INFLUENCE MINE MK-II (EMPTY ASSEMBLY)TO ARDE DRG. NO. 9707 00 04 00 00 000 00TA AS PER QAP NO.NFM/IMMK-II/PKG/02
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) CASE CARRYING SNV MCT 2015 3 COMPLETE[74]()
Specification : CASE CARRYING SNV 5.56 MM LMG(INSAS) TO DRG. NO. MCT-2015/3 , COMPLETE,CASE CARRYING SNV 5.56MM LMG(INSAS) 101A TO DRG.NO.:MCT-2015/3 (COMPLETE) CONSISTING OF MCT-1369,MCT-1370,MCT-1375, MCT-1376,MCT-1380,MCT-1617/1,MCT-1636/1, MCT-1637/1
C
Nonestab
2) Case Carrying FRP IRDE 2610[74]()
Specification : Case Carrying FRP IRDE 2610
C
Nonestab
3) CASE CARRYING FRP MCT 1678 2[74]()
Specification : CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56 MM RIFLE AS PER DRG. NO. MCT 1678 2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PACKAGE TO DRG NO 08040002000000000 LF 9911358292[99]()
Specification : PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) HARD CARRYING CASE AS PER SPEC 13[74]()
Specification : HARD CARRYING CASE AS PER SPEC 13
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141500001 MINE DRILL APERS M14 WITH FZ INTGL E ASS PKD IN APPD PKG 5RG ITX 14GA DC 36985A 14 10 04 SPCN CQA A 1828 C DC 37095A 27 2 07 PKD AMN 70B L DRG ISV 221GA DC36250A 4 3 97SPCN PKGIA948 A K DC 36868A 29 11 02 MKG PTG CRATE 2A BY LAT DRGORCI[61]()
Specification : MINE DRILL APERS M14 WITH FZ INTGL(E) ASS.& PKD IN APPD.PKG.5RG ITX 14GA DC 36985A/14-10-04,SPCN.CQA(A)1828(C) DC 37095A/27-2-07.PKD AMN 70B/L DRG ISV 221GA DC36250A/4-3-97SPCN PKGIA948(A,K)DC 36868A/29-11-02,MKG.& PTG.CRATE 2A BY LAT.DRG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) TRANSIT CASE TO DRG NO. TEND 1937* FOR 40mm MGL[70]()
Specification : AS PER DRG OF " TRANSIT CASE TO DRG NO. TEND 1937* FOR 40mm MGL
"
E
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A[65]()
Specification : SPECN.NO. CQA(A) 2804
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) PLASTIC PACKAGE FOR PRE FRAG 100 120 KG BOMB LF 9911358232
Description : PLASTIC PACKAGE FOR PRE FRAG 100 120 KG BOMB LF 9911358232()
Specification : PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY'2014.
P
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) OPTOMECHANICAL ASSEMBLY SPEC 41[74]()
Specification : OPTOMECHANICAL ASSEMBLY SPEC41
C
Nonestab
2) HOLOGRAPHIC SIGHT ASSEMBLY AS PER SPEC NO 43[74]()
Specification : HOLOGRAPHIC SIGHT ASSEMBLY AS PER SPEC NO. 43
E
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) CASE CARRYING MCT 1925[74]()
Specification : CASE CARRYING TO DRG. NO. MCT-1925/3 (COMPLETE) CONSISTING OF DRG. NOS. MCT-1349/1, MCT-1350/1, MCT-1369, MCT-1456/1, MCT-1458/1, MCT-1916/2, MCT-1917/2, MCT-2213/1, MCT-2212/1 CQA(I) INSTRUCTION SHEET NO. IS/INF/15(A).
C
Nonestab
2) CASE CARRYINGFOR GNVP[74]()
Specification : CASE CARRYING AS PER DRG.NO.: CWC-250 FOR GNVP M1
C
Nonestab
3) CASE CARRYING FOR PNS RIFLE LMG[74]()
Specification : CASE CARRYING AS PER DRG.NO.CWC-233 FOR PNS 5.56MM RIFLE/LMG
C
Nonestab
4) CASE CARRYING FRP FOR MODIFIED PNS 84 MM CARL GUSTAV[74]()
Specification : CASE CARRYING F.R.P AS PER DRG. NO.CWC-235 FOR MODIFIED PNS 84 MM CARL GUSTAV
C
Nonestab
5) CASE CARRYING FOR PNV MONOCULAR[74]()
Specification : CASE CARRYING AS PER DRG.NO.CWC-254 FOR PNV MONOCULAR
C
Nonestab
6) CASE CARRYING TELESCOPE SIGHTING LMG INSAS[74]()
Specification : CASE CARRYING TELESCOPE SIGHTING 5.56 MM LMG (INSAS) 101A, MCT-1452/2 CONSIST OF (MCT-1369,MCT-1455/1, MCT-1458/1,MCT-1454/4,MCT-1350/1,MCT-1453/3, MCT-1456/1,MCT-1451/6,MCT-1349/1)
C
Nonestab
7) CASE CARRYING CWC 245[00]()
Specification : CASE CARRYING DRG.NO.CWC-245
C
Nonestab
8) CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE RIFLE INSAS[74]()
Specification : CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1
C
Nonestab
9) FRP CASE CARRYING[74]()
Specification : FRP CASE CARRYING TO DRG NO. MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)
1) PF OGIVE ASSEMBLY E FOR PF WARHEAD AS PER ARDE DRG NO 1905 03 02 01 03 00 000DA
Description : PF OGIVE ASSEMBLY E FOR PF WARHEAD AS PER ARDE DRG NO 1905 03 02 01 03 00 000DA()
Specification : PF OGIVE ASSEMBLY-E FOR PF WARHEAD AS PER ARDE DRAWING NO 1905 03 02 01 03 00 000DA
C
Estab
2) RHE OGIVE ASSEMBLY M AS PER ARDE DRAWING NO 1905 02 01 01 02 000 00 DA
Description : RHE OGIVE ASSEMBLY M AS PER ARDE DRAWING NO 1905 02 01 01 02 000 00 DA()
Specification : RHE OGIVE ASSEMBLY (M) AS PER ARDE DRAWING NO 1905 02 01 01 02 000 00 DA
C
Estab
3) RHE SHELL ASSEMBLY M AS PER ARDE DRG NO 1905 02 01 01 01 00 000DA
Description : RHE SHELL ASSEMBLY M AS PER ARDE DRG NO 1905 02 01 01 01 00 000DA()
Specification : RHE SHELL ASSEMBLY M AS PER ARDE DRG NO 1905 02 01 01 01 00 000DA
