List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
441 Associated Representatives
16 tagore vill chakrata road above PNB Bank Dehradun Uttarakhand
PIN1 : 248001
Phone No. : 2715189
GSTIN : 05ABGPB1497HIZV 		MARTA02124

Download 		1Opto Electronic Factory

Name Specification Use Status
1) 2612884803 MOULD OF GERMANIUM WINDOW[26]() Specification : MOULD OF GERMANIUM WINDOW / OPT/MISC/476M1 C Nonestab
Category :
Grade : Grade III
Size : S
442 AMBAR AUTO ENGINEERS PVT LTD
PLOT NO. D-1/15 MIDC AMBAD NASHIK Maharashtra
PIN1 : 422010
Phone No. : 6699972
GSTIN : 27AAGCA1605G1Z3 		NSKA04655A

Download 		1Small Arms Factory

Name Specification Use Status
1) Al. Forging for Body Cover DRG no. SKM-174*[06]() Specification : Al. Forging for Body Cover DRG No. SKM-174* R Estab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) Al. Forging for Body Cover DRG no. SKM-174*[06]() Specification : Al. Forging for Body Cover DRG No. SKM-174* C Estab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STEEL FORGINGS FOR BRACKET BACK SIGHT[01]() Specification : STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ), R Estab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) Al. Forging for Body Cover DRG no. SKM-174*[06]() Specification : Al. Forging for Body Cover DRG No. SKM-174* C Estab
2) St. Forging Plate Bottom to DRG No. SKM-283*2[01]() Specification : St. Forging Plate Bottom to DRG No. SKM-283*2 C Estab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) Forging of Guide Front Right DRG. no. SKM-305*2[04]() Specification : Forging Guide Front Right SKM-305*2 R Estab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STEEL FORGING BREACH BLOCK SLIDE[04]() Specification : STEEL FORGING BREACK BLOCK SLIDE DRG NO. SKM-281*2 ''NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGING MACRO ETCH AS PER ASTME -381 WITH ACCEPTANCE STANDARD AS C2,R2,S2 & NMIR TEST AS PER IS -4163-82 C Estab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) 3.FRAME TRIGGER 1005-06602[70]() Specification : AS PER DRG. C Estab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STEEL FORGING BLOCK REAR FOR LMG 5 56[03]() Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17 C Estab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) Al. Forging for Body Cover DRG no. SKM-174*[06]() Specification : Al. Forging for Body Cover DRG No. SKM-174* C Estab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) Al FORGING FOR BODY COVER for MAG[61]() Specification : AL.FORGING FOR BODY COVER DRG.NO. SKM-174* C Estab
2) FORGING RECEIVER GUIDE FRONT RIGHT for MAG[41]() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2 C Estab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STEEL FORGINGS FOR BRACKET BACK SIGHT[01]() Specification : STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ), R Estab
2) STEEL FORGING FOR LEVER LOCKING FOR MAG[04]() Specification : DRG. NO. SKM-303*5 MICRO-ETCH & NMIR TEST AS PER DRG. C Estab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STEEL FORGING HAMMER FOR JVPC[01]() Specification : STEEL FORGING HAMMER FOR JVPC 5.56 MM AS PER DRG. NO. SK JVPC 969. C Estab
2) Steel Forging Piston Extension for JVPC[01]() Specification : Steel Forging Piston Extension for JVPC 5.56MM as per Drawing No. SK 5725 C Estab
3) Steel Forging Block Gas for JVPC[01]() Specification : STEEL FORGING BLOCK GAS FOR JVPC 5.56MM AS PER DRG.NO. SK-JVPC-6003 C Estab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) BODY TRIGGER Drg. No 1099 A[06]() Specification : AS PER DRG C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) St. Forging of PISTON EXTENSION for JVPC Drg. No. SK-5725[01]() Specification : AS PER DRG. C Nonestab
2) St. Forging of BLOCK REAR TO Drg. No. MS-331*1 D.A. NO. 09/17[03]() Specification : AS PER DRG. C Nonestab
3) St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.[01]() Specification : St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG. C Nonestab
4) Aluminium Alloy Forging Drg. No- SKM-149[06]() Specification : AS PER DRG. C Nonestab
5) St. Forging Hammer Drg No. MS-332[04]() Specification : AS PER DRG. C Nonestab
6) Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17[03]() Specification : AS PER DRG. C Nonestab
7) Steel Forging Block Gas(heavy) SKM-958(Prov.)[01]() Specification : AS PER DRG. C Nonestab
8) Steel Forging Block Gas for MAG 7.62 MM Drg No. SKM-957 (Prov.)[01]() Specification : AS PER DRG. C Nonestab
9) Forging of block front DSCAT no. SKM-282*4[01]() Specification : AS PER DRG. C Nonestab
10) Forging of Buffer Body DS CAT no. SKM-304*1[01]() Specification : AS PER DRG. C Nonestab
11) Forging of Breech Block slide DS CAT no. 281*2[04]() Specification : AS PER DRG. C Nonestab
12) Forging of Guide Front Right DRG. no. SKM-305*2[04]() Specification : Forging Guide Front Right SKM-305*2 C Nonestab
13) Al. Forging for Body Cover DRG no. SKM-174*[06]() Specification : Al. Forging for Body Cover DRG No. SKM-174* C Nonestab
14) St. Forging Plate Bottom to DRG No. SKM-283*2[01]() Specification : St. Forging Plate Bottom to DRG No. SKM-283*2 C Nonestab
15) ALUMINIUM FORGING SKM -426 FOR BODY COVER (AIR VERSION)[06]() Specification : ALUMINIUM FORGING SKM -426 FOR BODY COVER (AIR VERSION) C Nonestab
Category :
Grade : Grade III
Size : S
1Machine Tool Proto Type Factory

Name Specification Use Status
1) 7110302036 FORGING FOR GEAR RING CARRIER TO DRG NO P155 HRG 3014 3 FOR PROJECT DHANUSH[71]() Specification : FORGING FOR GEAR RING CARRIER TO DRG. NO: P155-HRG-3014-3 FOR PROJECT DHANUSH. R Nonestab
2) 7110302035 FORGING FOR PIN TO DRG NO P155 HRG 3012 3 FOR PROJECT DHANUSH[71]() Specification : FORGING FOR PIN TO DRG. NO: P155-HRG-3012-3 FOR PROJECT DHANUSH. R Nonestab
3) 7110302032 FORGING FOR GEAR RING TO DRG NO P155 HRG 3011 3 FOR PROJECT DHANUSH[71]() Specification : FORGING FOR GEAR RING TO DRG. NO: P155-HRG-3011-3 FOR PROJECT DHANUSH R Nonestab
4) 7110302033 FORGING FOR SUN GEAR TO DRG NO P155 HRG 3001 3 FOR PROJECT DHANUSH[71]() Specification : FORGING FOR SUN GEAR TO DRG. NO: P155-HRG-3001-3 FOR PROJECT DHANUSH. R Nonestab
Category :
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) TRIGGER FORGING FOR INSAS[70]() Specification : TRIGGER FORGING AS PER RFISK.NO.7057*-S FOR RIFLE 5.56MM INSAS C Nonestab
Category :
Grade : Grade III
Size : S
443 M/S AKAYGENTS PVT. LTD., CHENNAI
NOOR MAHAL, GROUND FLOOR, NO. 23/1 (OLD NO. 44/1) MC NICHOLS ROAD, CHETPET, CHENNAI TAMIL NADU
PIN1 : 600031
Phone No. : 044-28360066
GSTIN : 33AAACA2936L1ZT 		AAACA2936L

Download 		1Ordnance Factory Bhusawal

Name Specification Use Status
1) CROSS LINKED POLYETHYLENE FOAM (CAPCELL)() AS PER OFBH REQUIRED SPECIFICATION C ESTAB.
2) PROFEEL FITMENTS() AS PER OFBH REQUIRED SPECIFICATION C ESTAB.
3) CROSS LINKED POLYETHYLENE FOAM (CAPCELL)() AS PER OFBH REQUIRED SPECIFICATION C ESTAB.
4) PROFEEL FITMENTS() AS PER OFBH REQUIRED SPECIFICATION C ESTAB.
Category : P
Grade : II
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. C Estab
2) SET OF PROFEEL ANTISTATIC FITMENTS() Specification : AS PER CQA(A) SPECN. C Estab
3) PIECE PACKING SET TO DRG ARDE 1930() Specification : DRG NO ARDE 1930 DC 35965A (1) BOTTOM DET NO 3 PART ISV 1716 LENGTH 224MM -1 NO (2)TOP DET NO 4 PART ISV 1717 LENGTH 224MM 1 NO AND PIECES OF SIZES 174 X 113 X 25MM-2NOS, 274 X174X 15MM-2NOS, 113X 100 X 3MM-1NO C Estab
4) DISC DRG NO ISV2018 CQA A AMN 3042() Specification : DRG.NO. CQA(A)/AMN/3042 DET. NO. 3 PART NO. ISV 2018 DC 36449-A C Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) DISC FOR FUZE 162 MARK-8 & DA5A TO CQA Description : DISC FOR FUZE 162 MARK-8 & DA5A TO CQA() Specification : DISC FOR FUZE 162 MARK-8 & DA5A TO CQA(A)/AMMN/3042 DET.3 PART NO.ISV-2018.DC-36449-A Dt.30-07-98. C Estab
Category : p
Grade : 2
Size : S
1Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) PROFEEL PACKING FOR BBU MADE Description : PROFEEL PACKING FOR BBU MADE() Specification : SPECN. NO. IND/ME/913 AND AS PER DRG. NO. OFI/2007/GMP/102 SHEET 1/2 & 2/2. R Estab
2) ANTISTATIC POLYETHYLENE CUSHIONINGMATERIAL Description : ANTISTATIC POLYETHYLENE CUSHIONINGMATERIAL() Specification : AS PER HEMRL DRAWING NO.HEMRL/SRP/AK/BST/10.1, DET NO. 2& DOC NO.HEMRL/SRP/AK/BST/10.1 DET NO.1 AS PER TECHNICAL SPECIFICATIONS ANDQUALITY DOCUMENT FOR COMPOSITE BOOSTER PROPELLANT NO.R2 R Estab
Category : ddp
Grade : 1
Size : S
1Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) PROFEEL PACKING FOR BBU MADE Description : PROFEEL PACKING FOR BBU MADE() Specification : SPECN. NO. IND/ME/913 AND AS PER DRG. NO. OFI/2007/GMP/102 SHEET 1/2 & 2/2. R Estab
2) ANTISTATIC POLYETHYLENE CUSHIONINGMATERIAL Description : ANTISTATIC POLYETHYLENE CUSHIONINGMATERIAL() Specification : AS PER HEMRL DRAWING NO.HEMRL/SRP/AK/BST/10.1, DET NO. 2& DOC NO.HEMRL/SRP/AK/BST/10.1 DET NO.1 AS PER TECHNICAL SPECIFICATIONS ANDQUALITY DOCUMENT FOR COMPOSITE BOOSTER PROPELLANT NO.R2 R Estab
Category : ddp
Grade : 1
Size : S
444 SUPREME PACKAGES,
2/1014, VINAYAKAPURAM, BASTHI, HOSUR, KRISHNAGIRI TAMIL NADU
PIN1 : 635109
Phone No. : 04344-241740
GSTIN : 33AAOPN4997K1ZW 		AAOPN4997K

Download 		1Ordnance Factory Bhusawal

Name Specification Use Status
1) PROFEEL FITMENTS() AS PER OFBH REQUIRED SPECIFICATION R ESTAB.
2) CROSS LINKED POLYETHYLENE FOAM (CAPCELL)() AS PER OFBH REQUIRED SPECIFICATION R ESTAB.
3) PROFEEL FITMENTS() AS PER OFBH REQUIRED SPECIFICATION R ESTAB.
4) CROSS LINKED POLYETHYLENE FOAM (CAPCELL)() AS PER OFBH REQUIRED SPECIFICATION R ESTAB.
Category : P
Grade : II
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PROFEEL INNER PKG OF FZ ASY M GR LF 9911358099 Description : PROFEEL INNER PKG OF FZ ASY M GR LF 9911358099() Specification : SET OF INNER PACKING FITMENT FOR PACKING OF FUZE ASSEMBLY TO TBRL DRG.NO.9774 DET NO.2(PIECE HOUSING-II)3 NOS.IN A SETWITH PIECE PACKING TO TBRL DRG.NO.9774 DET.4 2 NOS IN A SETFOR MULTI MODE HAND GRENADE. P Estab
2) PROFEEL INNER PKG 4 PCS FOR 23 SCH LF 9911358088 Description : PROFEEL INNER PKG 4 PCS FOR 23 SCH LF 9911358088() Specification : PROFEEL PACKING FITMENT 4PIECE DESIGN TO DRG.PT.NO.ISV-618 ADC 37195-A DT.05-12-2008 WITH COMPONENTS-(1)BOTTOM PIECE TODRG.PT.NO.ISV 2192 (2) MIDDLE BOTTOM PIECE TO DRG.PT.NO.ISV-2193 (3) MIDDLE TOP PIECE TO DRG.PT.NO.ISV 2194 (4)TOP PIEC P Estab
3) PROFEEL PKG GR 36M CQA A AMMN 2394 LF 9911356670 Description : PROFEEL PKG GR 36M CQA A AMMN 2394 LF 9911356670() Specification : SET OF PROFEEL PACKING AS PER DESIG REF.CIA/AMN/2394 DRG PT.NO.ISV.438 GA DC NO.36948-A DT.27/01/04 CONSISTING OF:-(1)PADDING OF10 NOsGRENADE=01NO.TO DRG PT NO.ISV-2096(2)HOLDERLAUNCHER=01NO.TO DRG PT.NO.ISV.2097(3)BAG BULLETS=01NO.TODRGP P Estab
4) PLASTIC PACKAGE FOR PRE FRAG 100 120 KG BOMB LF 9911358232 Description : PLASTIC PACKAGE FOR PRE FRAG 100 120 KG BOMB LF 9911358232() Specification : PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY'2014. P Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SET OF INNER PACKING FITMENT FOR PACKING OF MAIN BODY ASSY LF 9911358102 Description : SET OF INNER PACKING FITMENT FOR PACKING OF MAIN BODY ASSY LF 9911358102() Specification : SET OF INNER PACKING FITMENT FOR PACKING OF MAIN BODY ASSY. TO TBRL DRG.NO.9774 DET NO.1(PIECE HOUSING-I)2 NOS.IN A SETWITH PIECE PACKING TO TBRL DRG.NO.9774 DET.4(2 NOS IN A SET)FOR MULTI MODE HAND GRENADE. C Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) INNER PACKING FITMENT OF BOX C 235 lf 9911358241 Description : INNER PACKING FITMENT OF BOX C 235 lf 9911358241() Specification : SET OF INNER PACKING OF BOX C-235 FOR PACKING OF 25 LBS BOMB TO OFK DRG.NO.KhPK-210098. R Nonestab
Category : p
Grade : 3
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PACKING PIECES FOR MINE APM() Specification : AS PER CQA(A) SPECN. R Estab
2) SET OF PROFEEL ANTISTATIC FITMENTS() Specification : AS PER CQA(A) SPECN. R Estab
3) PIECE PACKING SET TO DRG ARDE 1930() Specification : DRG NO ARDE 1930 DC 35965A (1) BOTTOM DET NO 3 PART ISV 1716 LENGTH 224MM -1 NO (2)TOP DET NO 4 PART ISV 1717 LENGTH 224MM 1 NO AND PIECES OF SIZES 174 X 113 X 25MM-2NOS, 274 X174X 15MM-2NOS, 113X 100 X 3MM-1NO R Estab
4) DISC POLYTHENE OD 55 X 6 MM THICK() Specification : AS PER SPECN. R Estab
5) DISC POLYTHENE O.D. 55 MM X 3 MM TH() Specification : AS PER SPECN. R Estab
6) DISC DRG NO ISV2018 CQA A AMN 3042() Specification : DRG.NO. CQA(A)/AMN/3042 DET. NO. 3 PART NO. ISV 2018 DC 36449-A R Estab
7) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.() Specification : IND/ME/913 R Estab
8) SET OF PKG. PIECES FOR LIMPET MINE() Specification : A) BOTTOM 460 X 355 X 25 MM TH 1 NO. B) END 300 X 135 X 30 MM TH 2 NOS C) SIDE 360 X 135 X 30 MM TH 2 NOS D) TOP 455 X 350 X 25 MM TH R Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) INTERNAL FITMENTS FOR BOX M-41A TO DESIGNER'S REF.CQA(A)/AMN/3306 PART NO ISV 302 SA Description : INTERNAL FITMENTS FOR BOX M-41A TO DESIGNER'S REF.CQA(A)/AMN/3306 PART NO ISV 302 SA() Specification : INTERNAL FITMENTS FOR BOX M-41A TO DESIGNER'S REF.CQA(A)/AMN/3306 PART NO ISV 302 SA DC-37127-A DT.30.07.07 (EACH SET CONSIST OF (1) TOP & BOTTOM PIECE TO PART NO ISV-2112 DC-36995 A DT.13.01.05=2 NOS (2) SIDE PIECES(BIG) TO PART NO ISV C Estab
2) DISC FOR FUZE 162 MARK-8 & DA5A Description : DISC FOR FUZE 162 MARK-8 & DA5A() Specification : CQA(A)/AMMN/3042 DET.3 PART NO.ISV-2018. DC-36449-A Dt.30-07-98. C Estab
Category : p
Grade : 2
Size : S
445 VISHAL ENGINEERING WORKS
S NO 12/3, MANIK COMPLEX, SHANTINAGAR, LANDEWADI PUNE Maharashtra
PIN1 : 411039
Phone No. : 27126776
GSTIN : 27AVWPM4735H1ZY 		AVWPM4735H

Download 		1Ammunition Factory Khadki

Name Specification Use Status
1) PLASTIC BOX FOR .22RF CARTGS.[6595050001]() Specification : DRG. NO. AFK/SK 586-09 SHT. 1 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) AMMN CONTAINER 69 A/L PLASTIC ARDE[65]() Specification : CQA(A)2804 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) TRAY PLASTIC MOULD[21]() Specification : DRG. NO.(AFK/SK - 2223 DT.13.12.91 ) 04-44-79000-06131-3 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) ANTISTATIC PLASTIC BOX POLY PROPYLENE COPOLYMER PPCP WITH ANTISTATIC GRAIN FOR PACKING OF CARTRIDGE S A 9 MM BALL[65]() Specification : DRAWING NO AFK/PROV-51 DTD.12.10.2016 & 15.05.2017 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) TRIMMED PLASTIC TUBE[21]() Specification : DRG NO AFK/SK-564-08 R Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) PLASTIC POWER PISTON W/O POUCH 65MM[21]() Specification : AFK DRG.NO. KF/SK-1809 C Nonestab
2) PLASTIC POWER PISTON FOR 70 MM 12 BORE[60]() Specification : DRG. NO KF/SK-1747 DATED 04/03/2000 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) BOX PLASTIC DRG NO AFK/SK-2224[14]() Specification : DRG NO. 04-44-79000-06130-3 C Nonestab
2) TRAY PLASTIC MOULD[21]() Specification : DRG. NO.(AFK/SK - 2223 DT.13.12.91 ) 04-44-79000-06131-3 C Nonestab
3) PLASTIC BOX FOR .22RF CARTGS.[65]() Specification : DRG. NO. AFK/SK 586-09 SHT. 1 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) PLASTIC POWER PISTON W/O POUCH 65MM[21]() Specification : AFK DRG.NO. KF/SK-1809 C Nonestab
2) PLASTIC POWER PISTON FOR 70 MM 12 BORE[60]() Specification : DRG. NO KF/SK-1747 DATED 04/03/2000 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) TRI PLASTIC TUBE FOR SA 12 BORE 70M[21]() Specification : DRG. NO. AFK/SK-563-08 R Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) PLASTIC INDEX DISC-SHOT NO.1[60]() Specification : DRG. NO. AFK/SK-2888 C Nonestab
2) PLASTIC INDEX DISC-SHOT NO.6[60]() Specification : DRG.NO.AFK/SK-2888.DT. 17.01.2007SHT.1 C Nonestab
3) PLASTIC INDEX DISC-SHOT NO.BB[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Nonestab
4) PLASTIC INDEX DISC-SHOT NO.8[60]() Specification : DRG NO. AFK/SK-2888 DT.04.05.2002 C Nonestab
5) PLASTIC INDEX DISC-SHOT NO.4 No[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Nonestab
6) PLASTIC INDEX DISC-SHOT NO.7[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Nonestab
7) PLASTIC INDEX DISC-SHOT NO.9[60]() Specification : DRG.NO.AFK/SK-2888 DT.11.01.2007 C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) PLATE GRIP ASSY. FOR CARBINE 9 MM[70]() Specification : PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHEDCONDITION COMPLETE OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT.09-06-04. C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2[70]() Specification : PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2 C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) BUTT PLASTIC FOR AKC 14[70]() Specification : BUTT PLASTIC TO DRG NO.AKC-14 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) MAGAZINE PLASTIC FOR AMOGH 5 56MM IN FINISHED CONDITION[70]() Specification : MAGAZINE PLASTIC, 30 RDS TO DRG NO. AKC-18*2 FOR AMOGH 5.56MM IN FINISHED CONDITION C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) GRIP ASSY OF REVOLVER MK-III[70]() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFTSUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITHINSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQUIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITION. D. C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) GRIP ASSY OF REVOLVER MK-III[70]() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFTSUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITHINSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQUIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITION. D. C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'[70]() Specification : PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) GRIP ASSY OF REVOLVER MK-III[70]() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFTSUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITHINSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQUIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITION. D. C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) Barrel Cover Assembly for JVPC Consisting of Barrel Cover Moulding and Bush Barrel Cover[70]() Specification : Barrel Cover Assembly for JVPC 5.56 X 30MM DRG. No. 0204-03-03-01-12-000-00DB Consisting of Barrel Cover Moulding & Bush Barrel Cover C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) Cocking Handle Moulding for JVPC Consisting of Insert Cocking Handle[70]() Specification : Cocking Handle Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-03-01-14-000-00DB Consisting of Insert Cocking Handle C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) PLUNGER HOD MOULDING for LMG[70]() Specification : PLUNGER HOD(MOULDING)TO DRG. NO.CQA(SA)SK-982, DS CAT NO. 5340-179455 , DC(I) NO.26578-SA ,DT.04-03-11,CONSISTING INSERT PLUNGER HOD, DS CAT NO. 4933-000770, DC(I) NO. 26950-SA, DT. 27.09.16 C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) CARRYING HANDLE MOULDING FOR LMG[70]() Specification : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) PLASTIC MOULDED BOX FOR REVOLVER[14]() Specification : PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2, C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) Grip Handle Left and Right For FIRING DEVICE[70]() Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125 C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) GAS CYLINDER COVER MOULDING FOR JVPC[70]() Specification : GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DB C Nonestab
2) TRIGGER GUARD MOULDING for JVPC[70]() Specification : TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD for JVPC C Nonestab
3) Cocking Handle Moulding for JVPC Consisting of Insert Cocking Handle[70]() Specification : Cocking Handle Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-03-01-14-000-00DB Consisting of Insert Cocking Handle C Nonestab
4) Barrel Cover Assembly for JVPC Consisting of Barrel Cover Moulding and Bush Barrel Cover[70]() Specification : Barrel Cover Assembly for JVPC 5.56 X 30MM DRG. No. 0204-03-03-01-12-000-00DB Consisting of Barrel Cover Moulding & Bush Barrel Cover C Nonestab
5) MUZZLE CAP MOULDING FOR JVPC[70]() Specification : MUZZLE CAP MOULDING DRG. NO. 0204 04 04 00 00 001 00DA C Nonestab
6) Pistol Grip Moulding for JVPC[70]() Specification : Pistol Grip Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-02-19-31-000-00DG Consisting of INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' C Nonestab
7) BUTT ARMS MOULDING FOR JVPC[70]() Specification : BUTT ARMS MOULDING DRG. NO. 0204-03-03-03-18-000-00DF C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) PLUG FOR FIRING DEVICE 1B FOR MINE[70]() Specification : PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) Grip Handle Left and Right For FIRING DEVICE[70]() Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125 C Nonestab
Category :
Grade : Grade III
Size : S
446 VENKATESHWARA CNC TECHNICS
PLOT NO 86 SVCIE PHASE III IDA BALANAGAR HYDERABAD Telangana
PIN1 : 500037
Phone No. : 23770435
GSTIN : 36AAEFV7334C1Z9 		HYDV05907G

Download 		1Ammunition Factory Khadki

Name Specification Use Status
1) CLIPS SEALS 13MM 0.15MM W0.5MM 0.03[01]() Specification : IS:1029-1970 FIRST REVISION WITH AMENDMENT NO. 1 & 2 C Nonestab
Category :
Grade : Grade III
Size : S
447 N K TEMPLES PRIVATE LIMITED
E-21, CHAMBAL INDUSTRIAL ESTATE CHAMBAL INDUSTRIAL ESTATE KOTA Rajasthan
PIN1 : 324003
Phone No. : 2481400
GSTIN : 08AADCN8531F1ZG 		JDHN03289G

Download 		1Ammunition Factory Khadki

Name Specification Use Status
1) STEEL INSERT (MODIFIED) FOR BULLET, DRG.NO. AFK/SK-2556 SHEET NO.1 DT.8-8-2001.[60]() Specification : DRG.NO. AFK/SK-2556 SHEET NO.1 DT.8-8-2001. C Nonestab
2) STEEL INSERT FOR BULLET FOR CARTG. 5.56MM X 30MM (MSMC) AS PER ARDE DRG.NO.0204-02-01-01-01-00-00DB[60]() Specification : ARDE DRG.NO.0204-02-01-01-01-00-00DB C Nonestab
3) STEEL INSERT. FOR 6.8MM BULLET AS PER DRG. NO. 085 01 00 01 01 001 00D (ARDE DRG.)[60]() Specification : DRG. NO. 085 01 00 01 01 001 00D (ARDE DRG.) C Nonestab
4) STEEL INSERT (MRN) FOR BULLET FOR CARTG. 5.56MM X 30MM, (R-31) MSMC (MRN) AS PER DRG. NO. - 0204-02-00-00-003-00XA[60]() Specification : DRG. NO. - 0204-02-00-00-003-00XA C Nonestab
5) PRECISION MACHINED COMPONENTS[60]() Specification : PRECISION MACHINED COMPONENTS C Nonestab
Category :
Grade : Grade III
Size : M
1Ammunition Factory Khadki

Name Specification Use Status
1) BODY FOR CARTG PP9[60]() Specification : DRG NO. HEMRL/PYRO/SK-0298 DET 1 C Nonestab
Category :
Grade : Grade III
Size : M
1Ammunition Factory Khadki

Name Specification Use Status
1) PYRO CARTRIDGE YDP 1 2 ASSY EMPTY[60]() Specification : DRG. NO. NASK 1015 (PROV) DT. 04.12.2009 R Nonestab
Category :
Grade : Grade III
Size : M
1Ammunition Factory Khadki

Name Specification Use Status
1) CASE FOR CARTRIDGE 38 MM RUBBER BULLET[60]() Specification : DGOF 135 (A)DT. 15-11-99. C Nonestab
Category :
Grade : Grade III
Size : M
1Ammunition Factory Khadki

Name Specification Use Status
1) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 SPECN. DGOF 135[60]() Specification : DGOF 135 (A)DT. 15-11-99. C Nonestab
Category :
Grade : Grade III
Size : M
1Ammunition Factory Khadki

Name Specification Use Status
1) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 SPECN. DGOF 135[60]() Specification : DGOF 135 (A)DT. 15-11-99. C Nonestab
Category :
Grade : Grade III
Size : M
1Ammunition Factory Khadki

Name Specification Use Status
1) STEEL INSERT FOR 5.56X30MM BALL BUL[60]() Specification : BS 970 PT.I, 1983 080 M40/709M40 OR ALTERNATE TO SPECN. BS-970 EN 8M C Nonestab
2) STEEL INSERT FOR NATO BULLET[60]() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 C Nonestab
3) STEEL INSERT TO DRG NO. ARDE/SA/395 FOR BULLET 5.56 X 30MM CARTG.[60]() Specification : DRG NO. ARDE/SA/395 R Nonestab
4) STEEL INSERT AS PER DRG NO.0803-00-02-01-01-00100DA.[60]() Specification : DRG NO.0803-00-02-01-01-00100DA. C Nonestab
5) STEEL INSERT AS PER DRG NO.(ARDE DRG) 0805 01 00 01 01 001 OODA.[60]() Specification : DRG NO.(ARDE DRG) 0805 01 00 01 01 001 OODA. C Nonestab
6) STEEL INSERT (JVPC MK-II) DRG NO. 0204 0205 00 01 001 00 DC.[60]() Specification : DRG NO. 0204 0205 00 01 001 00 DC. C Nonestab
7) STEEL INSERT TO DRG. NO. ARDE-SK-2795 DET NO.9, PART NO IQV 112 C 37206-A.[60]() Specification : DRG. NO. ARDE-SK-2795 DET NO.9, PART NO IQV 112 C 37206-A. C Nonestab
8) STEEL INSERT (MODIFIED) FOR BULLET, DRG.NO. AFK/SK-2556 SHEET NO.1 DT.8-8-2001.[60]() Specification : DRG.NO. AFK/SK-2556 SHEET NO.1 DT.8-8-2001. C Nonestab
9) STEEL INSERT FOR BULLET FOR CARTG. 5.56MM X 30MM (MSMC) AS PER ARDE DRG.NO.0204-02-01-01-01-00-00DB[60]() Specification : ARDE DRG.NO.0204-02-01-01-01-00-00DB C Nonestab
10) STEEL INSERT. FOR 6.8MM BULLET AS PER DRG. NO. 085 01 00 01 01 001 00D (ARDE DRG.)[60]() Specification : DRG. NO. 085 01 00 01 01 001 00D (ARDE DRG.) C Nonestab
11) STEEL INSERT (MRN) FOR BULLET FOR CARTG. 5.56MM X 30MM, (R-31) MSMC (MRN) AS PER DRG. NO. - 0204-02-00-00-003-00XA[60]() Specification : DRG. NO. - 0204-02-00-00-003-00XA C Nonestab
12) PRECISION MACHINED COMPONENTS[60]() Specification : PRECISION MACHINED COMPONENTS C Nonestab
Category :
Grade : Grade III
Size : M
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) MACHINING OF TRACK GUIDE[61]() Specification : AS PER OFM APECIFICATION C Nonestab
Category : ddp
Grade : 3
Size : M
1Ordnance Factory Muradnagar

Name Specification Use Status
1) MACHINING OF LUG 243[61]() Specification : AS PER DRAWING C Nonestab
2) MACHINING OF LUG 318[61]() Specification : AS PER OFM SPECIFICATION C Nonestab
Category : ddp
Grade : 3
Size : M
1Ordnance Factory Muradnagar

Name Specification Use Status
1) MACHINING OF TRACK LINK[61]() Specification : AS PER OFM SPECIFICATION C Nonestab
Category : ddp
Grade : 3
Size : M
448 Naveen Dresses
A-12,Roza Industrial Area,Roza,NH-24 Shahjahanpur Uttar Pradesh
PIN1 : 242001
Phone No. : 8090511616
GSTIN : 09AATPK0152GIZN 		AATPK0152G

Download 		1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) Fabrication of Outer Layer of Trousers ECC() Prov. Specification No.S/3558/A//TC-15/Trousers ECC(TWC & TSP) (a) AND APPROVED SAMPLE C Not Estab.
2) Fabrication of Trouser ECC() FABRICATION OF COMPLETE TROUSERS ECC CONFIRMING TO PROV.SPECIFICATION NO.S/3558/A/TC-15/TROUSERS ECC(TWC & TSP) (a)AND APPROVED SAMPLE.AS PER RELEVANT CLAUSE OF SPECIFICATION E Non Established
3) Fabrication of Outer Layer of Trouser ECC() Prov. Specification No. S/3558/A/TC-15/Trousers ECC (TWC & TSP) (a) AND APPROVED SAMPLE E Non Established
4) Fabrication of Trousers Serge PW 1973 Pattern (Modified)() IND/TC/4634(1) and Approved sample E Non Established
5) Fabrication of Waist Coat (Inn.Lay.)() IND/TC/4587 and Approved Sample E Non Established
6) Fabrication of Overall Winter Complete() TC/CLO/235(f) & Certified sample schedule No.CQA(T&C)/TC-15/8(d) E Non Established
7) FABRICATION OF SMOCK DENISION() NO. TC/CLO/143(r),CERTIFIED SAMPLE AND SCHEDULE NO.CQA(T&C)/TC-15/8(d) E Non Established
8) Fabrication of Coat Combat Disruptive, Detachable with Indian Army Logo() S/2594/CCD Army Logo/TC-15 (a) E Non Established
9) Fabrication of Jacket Wind cheater() As Per Requirements & Specifications E Non Established
10) Fabrication of Cap Glacier() As Per Requirements & Specifications E Non Established
11) Fab. Of Cap F.S.Disruptive with Indian Army Logo() Prov. SPECIFICATION NO. S/2590/CAP FS Army Logo/TC-15(a) and approved sample E Non Established
12) Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012() IND/TC/4552 (1) & Approved Sample E Non Established
13) Fabrication of Suit Terry Wool BG() AIR HQ/DQAS/AC-042 E Non Established
14) Fabrication of Trouser Terry Wool BG() AIRHQ/DQAS/AC-054, and approved sample E Non Established
15) Fabrication of Coat ECC() IND/TC/4587 & Approved Samples E Non Established
16) FABRICATION OF COAT ECC (IMP.VER.)() FABRICATION OF COAT ECC(IMP.VER.)AS PER SPECIFICATION NO.IND/TC/4587(C) AND APPROVED SAMPLE.As per relevant clause of specification E Non Established
Category : DP
Grade : III
Size : S
449 TOCOL MACHINE TOOLS PVT. LTD.
#472-C1, 13th Cross, 4th Phase, Peenya Industrial Area, Bangalore, Karnataka
PIN1 : 560058
Phone No. : 080-28361018, 4117776
GSTIN : 29AABCT0304Q1Z6 		BLRT01329G

Download 		1Ammunition Factory Khadki

Name Specification Use Status
1) SHORT RANGE CHAFF ROCKET (SRCR) (EMPTY) (TYPE E, C & H) DRG NO. NASK 828/1() DRG NO. NASK 828/1 C Not Estab.
2) 105 MM MEDIUM RANGE CHAFF ROCKET (MRCR) (ASSL. EMPTY) DRG. NO. NASK 762 SHT. 1 (PROV)() DRG. NO. NASK 762 SHT. 1 (PROV) C Not Estab.
3) MINE APM 16 A1 CONSISTING OF (1) BODY LOADING ASSY. (2) CONTAINER ASSY. (3) SPOOL ASSY.() CQA(A) 1804 C Not Estab.
4) CARTG. TRAINING FOR 81 MM MORTAR BOMB 3A EMPTY TO DRG. NO. ARDE 2254 PT. NO. IRW 3GE() CQA (A) 2348 C Not Estab.
5) CARTG. TRAINING FOR 81 MM MORTAR BOMB 3B EMPTY TO DRG. NO. ARDE 2254 PT. NO. IRW 3GE() CQA (A) 2348 C Not Estab.
Category : P
Grade : II
Size : S
1Engine Factory Avadi

Name Specification Use Status
1) VALVE SEAT() 306-22-1 C ESTABLISHED
2) BODY SUPER CHARGER() 3338-420-3 C ESTABLISHED
3) COVER SUPER CHARGER() 3338-421-1 C ESTABLISHED
4) VOLUTE() 3338-422-1 C ESTABLISHED
5) VOLUTE DISC.() 3338-423-5 C ESTABLISHED
6) SHAFT WITH IMPELLER() SB 411-22-33 C ESTABLISHED
7) Block() 3338-57-4 C Non Established
8) Starting Valve Bush() 306-19-2 E Established
9) Bolt() 466-090H E Established
10) Oil Pump Assy() SB 20-12-00-13 E Established
11) Tightening Stud() 30-84-2A E Established
12) Stud M6x32() 350-16A E Established
13) Valve Guide() 306-17-5 E Established
14) Bush for Con.rod small end() 304-13-3 E Established
15) Air Distributor() SB 310-30-6 E Established
16) Spacer() SB 317-53-1 E Established
17) Cylinder Head Attaching Stud() 20-01-17-1 E Established
18) Shaft with Impeller() SB 411-22-33 E Established
19) Guide Bushing() 506-17-7 E Established
20) Tappet() 20-27-15-1 E Established
21) Assy Piston pin with cap() 304-10-5 & 304-11-10 E Established
Category : DDP
Grade : I
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) ADOPTER BUSH FOR 81MM SMOKE GRENADE (9911358269)() ADOPTER BUSH TO DRG.NO. 4-26941-007 DC NO. 35878 DTD. 20/12/94 C NOT ESTABLISHED
Category : P
Grade : II
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) RELIEF VALVE() DRG NO. 172.32.191CBCB C Not Estab.
2) COVER() DRG NO. 172.73.010CB C Not Estab.
3) RIGHT HAND LATCH ASSY.() DRG NO.172.93.237CBCB C Not Estab.
4) PIN() DRG NO. 613.44.058 C Not Estab.
5) SETTLER() DRG NO. 172.60.012CB-6CB C Not Estab.
6) BODY ASSY.() U/O ADY2-016CB/ 155.38.031CB-A-OH ADY-3-03CB C Not Estab.
7) FLOAT VALVE() DRG NO.176.33.020CB-1 C Not Estab.
8) HYDRO CYCLONE SETTLER ASSY() DRG.NO.175.66.026CB-1CB C Non Established
9) ELEVATING MECHANISM ASSY.() DRG.NO.188.15.005CBCB C Non Established
Category : P
Grade : II
Size : S
1Ordnance Factory Medak

Name Specification Use Status
1) TURBO MACHINERY EQUIPMENTS AND ASSEMBLIES() As per drawing C Not Estab
2) SPECIAL PURPOSE MACHINE TOOLS AND PRECISION MACHINE TOOLS() As per requirement C Not Estab
3) JIGS AND FIXTURES AND MACHINE TOOL ACCESSORES() As per requirement C Not Estab
Category : P
Grade : II
Size : S
1Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) Pipe Description : Pipe() Specification : 172-32-178Cb C Estab
2) Assy Pipe Description : Assy Pipe() Specification : 188-32-052CbCb C Estab
Category : ddp
Grade : 1
Size : S
450 BUFFALO TUNGSTEN INC,
# 2 MAIN STREET, DEPEW, NY 14043 USA
PIN1 : 14043
Phone No. : + 1 - 716-683-9170 		0126700283

Download 		1Heavy Alloys Penetrator Project

[Deemed Registration]
Name Specification Use Status
1) TUNGSTEN POWDER[AS PER SPECN : ARDE/SPECN/PNWH/MAT/TAP - 2012, ISSUE - 01.]() AS PER SPECN : ARDE/SPECN/PNWH/MAT/TAP - 2012, ISSUE - 01. R NOT ESTAB.
Category : DDP
Grade : I
Size : L
451 BHAGWATI METALLOYS PRIVATE LIMITED
218, ASHIANA TOWER, EXHIBITION ROAD 218, ASHIANA TOWER, EXHIBITION ROAD Patna Bihar
PIN1 : 800001
Phone No. : 2323772
GSTIN : 10AAICA8410F1Z9 		AAICA8410F

Download 		1Ammunition Factory Khadki

Name Specification Use Status
1) LEAD PIG PB 99.94 IS-27 1992(4 REV)[0801473000]() Specification : IS: 27 - 1992 (FOURTH REV). WITH A.NO.1 R Nonestab
2) LEAD PIG FOR CIVIL TRADE ONLY[08]() Specification : IS:27-1992 ( FOURTH REV ) ( WITH AMENDMENT NO. 1 ). R Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) LEAD PIG PB 99.94 IS-27 1992(4 REV)[08]() Specification : IS: 27 - 1992 (FOURTH REV). WITH A.NO.1 R Nonestab
2) LEAD PIG FOR CIVIL TRADE ONLY[08]() Specification : IS:27-1992 ( FOURTH REV ) ( WITH AMENDMENT NO. 1 ). R Nonestab
Category :
Grade : Grade III
Size : S
452 COSTON ENGINEERING PRODUCTS
12, SAVITHIRI NAGAR, RAMANATHAPURAM, coimbatore Tamil Nadu
PIN1 : 641045
Phone No. : 4978744
GSTIN : 33AALFC1864F1ZM 		CMBB05619F

Download 		1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]() Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) SUPPORTING CLAMP TO 6206802014[62]() Specification : SUPPORTING CLAMP TO DRG NO. 172.03.038CB C Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Alloys Penetrator Project

Name Specification Use Status
1) BUS BAR FOR RGB 60[33]() Specification : IS 6603: 1972 GR 07 Cr 18 Ni 9 / STEEL TO IS 513 GR 0 EDD C Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Alloys Penetrator Project

Name Specification Use Status
1) ASSY CONTACT FOR RGB-60[13]() Specification : AS DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) LOCK HANDLE TO 6206109012[62]() Specification : LOCK HANDLE TO 432.11.007CB-1 C Nonestab
Category :
Grade : Grade III
Size : S
453 INDIA METAL PRODUCT
122/674 SHASTRI NAGAR, KANPUR SHASTRI NAGAR KANPUR Uttar Pradesh
PIN1 : 208005
Phone No. : 2224700
GSTIN : 09AAPPB4473P1Z1 		KNPI01266G

Download 		1Ordnance Factory Muradnagar

Name Specification Use Status
1) PLUG DUMMY 250 KG() AS PER OFM SPECIFICATION C NOT ESTABLISHED
2) PLUG FASTENING 250 KG() AS PER OFM SPECIFICATION C NOT ESTABLISHED
3) NOSE PLUG 250 KG() AS PER OFM SPECIFICATION C NOT ESTABLISHED
Category : DDP,DP
Grade : I,II
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) NUT LOCKING WHEEL, STUD D6P. 260204 TO DRG. NO. 5310-001555[90]() Specification : NUT LOCKING WHEEL, STUD D6P. 260204 TO DRG. NO. 5310-001555 C Nonestab
2) SPANNER, 36A (ICM. 1595) SPANNER, 36A (ICM-1595) TO DRG. NO. 5120-003117[90]() Specification : SPANNER, 36A (ICM. 1595) SPANNER, 36A (ICM-1595) TO DRG. NO. 5120-003117 C Nonestab
Category : p
Grade : Grade III
Size : S
454 NEELESH ENGINEERS
SECTOR-7, PLOT NO. 86, PCNTDA, BHOSARI PUNE MAHARASHTRA
PIN1 : 411026
Phone No. : 02027126103, 9422311689
GSTIN : 27ABJPP1674P1ZW 		PNES12558A

Download 		1Ordnance Factory Muradnagar

Name Specification Use Status
1) BASE TRANSIT 250 KG() AS PER OFM SPECIFICATION C NOT ESTABLISHED
2) LUG HOUSING 250 KG() AS PER OFM SPECIFICATION C NOT ESTABLISHED
3) FILLING PLUG (MCD) 250 KG() AS PER OFM SPECIFICATION C NOT ESTABLISHED
4) RING NUT 250 KG() AS PER OFM SPECIFICATION C NOT ESTABLISHED
5) BASE TRANSIT (MCD) 1000 LBS() AS PER OFM SPECIFICATION C NOT ESTABLISHED
6) RING NUT 1000 LBS() AS PER OFM SPECIFICATION C NOT ESTABLISHED
7) PLUG DUMMY 250 KG() AS PER OFM SPECIFICATION C NOT ESTABLISHED
8) PLUG FASTENING 250 KG() AS PER OFM SPECIFICATION C NOT ESTABLISHED
Category : P
Grade : III
Size : S
1Machine Tool Proto Type Factory

Name Specification Use Status
1) MANDREL ASSY() VMT-SK-119-10000-11 C NOT ESTABLISHED
Category : P
Grade : II
Size : S
1Ordnance Factory Itarsi

Name Specification Use Status
1) CASTING FIXTURE(MOULDS) FOR PINAKA PROPELLANT() MADE OF ALLUMIMINUM HE-30 & AS PER ATTACHED SPECIFICATION R Not Estab
2) SPLIT DIE FOR PRESSURE MOULDING () AS PER DRG.NO.HEMRL/SRP/ R Not Estab
Category : DP
Grade : III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) HEAD() AS PER OFAJ DRG NO. FS/2936 C NOT ESTAB.
2) FABRICATION OF PINION () AS PER GSF DRG NO. 94621.06.009 C NOT ESTAB.
3) LUG REPRESENTATING FUZE FOR SRGM() AS PER GSF SPEC & DRG C NOT ESTAB.
4) BOTTOM PLATE WITH SWIVEL FOR 84 MM ILLG() AS PER SPEC & DRG OF O.F. DEHU ROAD C NOT ESTAB.
5) BASE TRANSIT 250 KG() AS PER SPEC & DRG OF OFM C NOT ESTAB.
6) LUG HOUSING 250 KG() AS PER SPEC & DRG OF OFM C NOT ESTAB.
7) FILLING PLUG (MCD) 250 KG() AS PER SPEC & DRG OF OFM C NOT ESTAB.
8) RING NUT 250 KG() AS PER SPEC & DRG OF OFM C NOT ESTAB.
9) BASE TRANSIT (MCD) 1000 LBS() AS PER SPEC & DRG OF OFM C NOT ESTAB.
10) RING NUT 1000 LBS() AS PER SPEC & DRG OF OFM C NOT ESTAB.
11) PLUG DUMMY 250 KG() AS PER SPEC & DRG OF OFM C NOT ESTAB.
12) PLUG FASTENING 250 KG() AS PER SPEC & DRG OF OFM C NOT ESTAB.
13) CASTING FIXTURE(MOULDS) FOR PINAKA PROPELLENT() AS PER SPEC & DRG OF O.F. ITARSI C NOT ESTAB.
14) SPLIT DIE FOR PRESSURE MOULDING() AS PER SPEC & DRG OF O.F. ITARSI C NOT ESTAB.
15) MANDREL ASSEMBLY() AS PER SPEC & DRG OF MTPF C NOT ESTAB.
Category : DDP
Grade : II
Size : S
1Ordnance Factory Kanpur

Name Specification Use Status
1) Steel plug fuze hole 2 inch(50.8mm) for 105mm ILLG.,SMK.&COL.() As per Drg. No. ISX-342 C Not Estab.
Category : P
Grade : III
Size : S
1Ordnance Factory Bolangir

Name Specification Use Status
1) TOP PLUG () OFAJ DRG.NO:S-78C (REF. DRG.NO.4079922,DC NO.36817-A,DT.08.03.2002,DULY SURFACE TREATED AS PER DRG.NO.5191819,DC NO.34810-A, DT.05.03.90 (PRF FOR 155MM M-107 & M77B ) C Not Estab.
Category : P
Grade : II
Size : S
455 MODHESHWARI CHEMICALS
A/1/1511, GIDC ESTATE, GIDC, ANKLESHWAR Bharuch Gujarat
PIN1 : 393002
Phone No. : 9377512003
GSTIN : 24ABNPG7795A1ZK 		ABNPG7795A

Download 		1High Explosive Factory

Name Specification Use Status
1) AMMONIUM CHLORIDE SALT[10]() IS: 1113-1965, Grade 1, and . HEF/IO/AP/02/2016 R Nonestab
Category :
Grade : Grade III
Size : S
456 Industrial Accessories Corporation
Kamanwala Chambers, 3rd floor, Sir P.M.Road, Mumbai Maharashtra
PIN1 : 400001
Phone No. : 22662316
GSTIN : 27AABPK1519M1ZP 		MUMK13497B

Download 		1Gun Carriage Factory

Name Specification Use Status
1) JOINT BALL REAR TO D S CAT NO M2 1010 000626 P T NO IAN 340SA ALONG WITH ALL DETAILS[90]() Specification : JOINT BALL REAR TO D. S. CAT. NO. M2/1010- 000626/ P. T. NO. IAN- 340SA ALONG WITH ALL DETAILS C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) RATCHET WRENCH ASSY L70 180 4021755[90]() Specification : RATCHET WRENCH ASSY( L70 /180) TO DRG. NO. 4021755 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) SPRING TO DRG NO BOF 6174091[90]() Specification : SPRING TO DRG.NO.BOF-6174091 C Nonestab
2) PLUNGER LOCKING IAN 321SA[90]() Specification : PLUNGER LOCKING IAN 321SA C Nonestab
3) PLUNGER TO PART NO BOF 6105849[90]() Specification : PLUNGER TO PART NO BOF 6105849 C Nonestab
4) SPRING TO DRG NO 6103129 2[90]() Specification : SPRING TO DRG NO 6103129 2 C Nonestab
5) SPANNER RING 51A CAT NO 5120 003896 0004[90]() Specification : SPANNER RING 51A CAT NO 5120 003896 0004 C Nonestab
6) SPANNER 36A ICM 1595 SPANER 36A 0026[90]() Specification : SPANNER 36A ICM 1595 SPANER 36A 0026 C Nonestab
7) SPANNER RING 52A PT NO 5120 003897[90]() Specification : SPANNER RING 52A PT NO 5120 003897 C Nonestab
8) SPRING TO DRG NO 6103129[90]() Specification : SPRING TO DRG NO 6103129 C Nonestab
9) SPRING FIRING ROD BOF 6002487[90]() Specification : SPRING FIRING ROD BOF 6002487 C Nonestab
10) LEVER RIGHT TO DRG NO DS CAT 1015 000771[90]() Specification : LEVER RIGHT TO DRG NO DS CAT 1015 000771 C Nonestab
11) SHAFT IFL 7962 TO DRG NO IFL 7962[90]() Specification : SHAFT IFL 7962 TO DRG NO IFL 7962 C Nonestab
12) JACKET ASSY TO DRG NO 2A26 CD06CB[90]() Specification : JACKET ASSY TO DRG NO 2A26 CD06CB C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) BEARER ASSY TO DRG NO 3016094[90]() Specification : BEARER ASSY TO DRG NO 3016094 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) HOSE TOWING VEHICLE EMERGENCY LINE SERVICE LINE TO DRG NO 2530 001006[90]() Specification : AS PER DRG C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) SHAFT IFL 7962 TO DRG NO IFL 7962[90]() Specification : SHAFT IFL 7962 TO DRG NO IFL 7962 C Nonestab
2) BUSHING FRONT DRG 2A26 09 22[90]() Specification : BUSHING FRONT DRG 2A26 09 22 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) ADAPTOR FUNNEL TO DRG NO 4933 000052[90]() Specification : ADAPTOR FUNNEL TO DRG. NO. 4933-000052 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9080081467 PIN SHOULDER HEADED TO DRG NO 5315 001003[90]() Specification : PIN SHOULDER HEADED TO DRG NO 5315 001003 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) SPACER TO PART NO 5050983[90]() Specification : SPACER TO PART NO 5050983 C Nonestab
2) BUSH TO DRG NO 5060095 5060095 Y[90]() Specification : BUSH TO DRG NO 5060095 5060095 Y C Nonestab
3) MAGNETIC PLUG 6123344[90]() Specification : MAGNETIC PLUG 6123344 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 4025316007 LIFTING TACKLE[90]() Specification : LIFTING TACKLE PART NO. 1154289 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) LEVELING JACK ASSY. TO DRG. NO. IAN-8MA[90]() Specification : LEVELING JACK ASSY. TO DRG. NO. IAN-8MA C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) SWIVEL FITTINGS CONNECTION[90]() Specification : SWIVEL FITTINGS CONNECTION,THREADS R' ANGLE TO BOF STD NO.N15-377 DESIGN.N15-377-8-SR ARTICAL NO 10341202 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) HOSE TOWING VEHICLE EMERGENCY LINE SERVICE LINE TO DRG NO 2530 001006[90]() Specification : AS PER DRG C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9081005701 SHAFT TO DRAWING NO 3054134[90]() Specification : SHAFT TO DRAWING NO.3054134 C Nonestab
2) 9081008366 EXHAUST HOSE COVER TO DRAWING NO GCF 50 41121[90]() Specification : 9081008366 EXHAUST HOSE COVER TO DRAWING NO GCF/50/41121 C Nonestab
3) 9070056921 ROTATING SOCKET WELDING ASSY TO PART NO AMG 72089 AND DRAWING NO 1015 001560[90]() Specification : ROTATING SOCKET WELDING ASSY. TO PART NO. AMG 72089 & DRAWING NO 1015-001560 C Nonestab
4) 9910448016 LEVER CONTROL HAND 2530 017684 ILG 1917 2530 017684[90]() Specification : 9910448016 LEVER CONTROL HAND (2530-017684), ILG-1917/2530-017684 C Nonestab
5) STOP LIMITING RATATION DRG NO 1015 000755[90]() Specification : STOP LIMITING RATATION DRG.NO.1015-000755 C Nonestab
6) BEARING SLEEVE TO DS CAT NO 3120 104751[90]() Specification : BEARING SLEEVE TO DS CAT NO. 3120-104751 C Nonestab
7) 9081008323 COVER RIGHT TO PART NO1155741 DRG NO 3055932[90]() Specification : COVER RIGHT TO PART NO.1155741(DRG.NO.3055932). C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9081005847 COVER 3055481 TO ARTICLE NO 1153793[90]() Specification : COVER (3055481) TO ARTICLE NO.1153793. C Nonestab
2) 9081008323 COVER RIGHT TO PART NO1155741 DRG NO 3055932[90]() Specification : COVER RIGHT TO PART NO.1155741(DRG.NO.3055932). C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) SHACKLE D 1A D6P TA 7208SA TO DRG NO 4030 000371 ICM 242A[90]() Specification : SHACKLE "D"1A(D6P-TA-7208SA) TO DRG.NO.4030-000371/ICM-242A C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) HOUSING ASSY FOR LMG[70]() Specification : HOUSING ASSY, DS CAT NO-1005-008001 (SAPRE ISSUE) FOR MONOPOD ASSY LMG 5.56MM C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) PIPE COUPLING AIR LINE 1015 000276[90]() Specification : PIPE COUPLING AIR LINE 1015 000276 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9910448142 PIPE ASSEMBLY TO PART NO IFL943 SA 4710040645[90]() Specification : 9910448142 PIPE ASSEMBLY TO PART NO IFL943 SA 4710040645 C Nonestab
2) 9910448141 NUT PLAIN WING IFL 8551 ILG 20072 IFL 8551[90]() Specification : 9910448141 NUT PLAIN WING IFL 8551 ILG 20072 IFL 8551 R Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9070056927 PINION AND GEAR ELEVATING TO DRAWING NO MI IMA 0072 C N[90]() Specification : PINION AND GEAR ELEVATING TO DRAWING NO. MI/IMA-0072 C N C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9080081598 VALVE ASSEMBLY TO PART NO 1015 000639 IFL 849SA[90]() Specification : VALVE ASSEMBLY TO PART NO.1015-000639/IFL 849SA C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9069112686 PLUG BLANKING DOUBLE IAN 280 SA[90]() Specification : 9069112686 PLUG BLANKING DOUBLE IAN 280 SA C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) LOCK TRAVERSING(FOR BODY) TO DRG. NO. IAN-155-SA[90]() Specification : LOCK TRAVERSING(FOR BODY) TO DRG. NO. IAN-155-SA C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) PIPE COOLING CROSS COUPLING 175 SA[90]() Specification : PIPE COOLING CROSS COUPLING 175 SA C Nonestab
2) PIPE EXHAUST TRAVERING VSG CROSS COUPLING IAN 194 SA TO DRG NO N15 13 6099821[90]() Specification : PIPE EXHAUST TRAVERING VSG CROSS COUPLING IAN 194 SA TO DRG NO N15 13 6099821 C Nonestab
3) PIPE EXHAUST TRAVERSING VSG CROSS COUPLING IAN 194SA TO DRG NO N15 13 6099821[90]() Specification : PIPE EXHAUST TRAVERSING VSG CROSS COUPLING IAN 194SA TO DRG NO N15 13 6099821 C Nonestab
4) 9073001407 ELECTRIC STRIKER SPRING TO DRG NO 902 01 008 1[90]() Specification : 9073001407 ELECTRIC STRIKER SPRING TO DRG NO 902 01 008 1 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9073000219 Valve Assy to Pt No 675 51 CD143CB with details to 1 Valve 675 51 182 2 Washer 675 51 183 3 Washer Flat 675 51 202 5310 233921 Belt 765 93 296 5 Steel Nickel Plated Metal Eye Let Rivet Size 3x25 to Oct 17 600 81 Indigenous Material IS 11[90]() Specification : 9073000219 Valve Assy to Pt No 675 51 CD143CB with details to 1 Valve 675 51 182 2 Washer 675 51 183 3 Washer Flat 675 51 202 5310 233921 Belt 765 93 296 5 Steel Nickel Plated Metal Eye Let Rivet Size 3x25 to Oct 17 600 81 Indigenous Ma C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9080086782 BRAKE DRUM 2530 004669 SHT 1 2[90]() Specification : BRAKE DRUM 2530-004669 SHT. 1&2 C Nonestab
2) 9080081501 PACKING NUT MACHINING TO DRG NO 4730 006970 SHT1[90]() Specification : PACKING NUT(MACHINING) TO DRG.NO.4730-006970 SHT-1. C Nonestab
3) 9080086754 HAND WHEEL SADDLE ASSY 5340016867[90]() Specification : HAND WHEEL (SADDLE ASSY) 5340-016867 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) CRANK RIGHT BOF 5051027 IN FC[70]() Specification : CRANK RIGHT (M2/BOF-5051027) IN F/C C Nonestab
2) CRANK LEFT BOF 5051028 IN FC[70]() Specification : CRANK LEFT (M2/BOF-5051028) IN FC C Nonestab
Category :
Grade : Grade III
Size : S
457 Universal Engineering
Sr.No:- 206, Lane No-11, Tukai Darshan Fursungi Pune Maharashtra
PIN1 : 412308
Phone No. : 9604124505
GSTIN : 27AAYPB6640D1ZM 		AGFPP0257R

Download 		1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SUPPLY OF COMPENSATOR AS PER DRG NO K 1021 WITH FIRMSMATERIAL[70]() Specification : SUPPLY OF COMPENSATOR AS PER DRG NO K 1021 WITH FIRMSMATERIAL C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) STAY BOTTOM LEFT TO DRG NO 1015 000695[90]() Specification : STAY BOTTOM (LEFT) TO DRG. NO. 1015-000695 C Nonestab
2) STAY BOTTOM RIGHT TO DRG NO 1015 000706[90]() Specification : STAY (BOTTOM RIGHT) TO DRG. NO. 1015-000706 C Nonestab
3) BUSH TO DRG NO 5060095 5060095 Y[90]() Specification : BUSH TO DRG NO 5060095 5060095 Y C Nonestab
4) BUSH BOF 6164802[90]() Specification : BUSH BOF 6164802 C Nonestab
5) BUSH TO PART NO BOF 6115890[90]() Specification : BUSH TO PART NO BOF 6115890 C Nonestab
6) 9081001250 COVER PART NO 1155764[90]() Specification : AS PER PART A C Nonestab
7) 9081005703 LOCK LID CAP TO DRAWING NO RP971674[90]() Specification : LOCK/LID(CAP) TO DRAWING NO.RP 971674 C Nonestab
8) 9081005704 LOCK LID CAP TO DRAWING NO RP971675[90]() Specification : LOCK LID(CAP) TO DRAWING NO.RP 971675 C Nonestab
9) 9081005707 FUEL CAN CONNECTION DRG NO 5182988[90]() Specification : FUEL CAN CONNECTION TO DRAWING.NO.5182988 TO DRG.NO-GCF/50/ 39943 C Nonestab
10) BEARING SLEEVE DRG NO 3120 004647[90]() Specification : BEARING SLEEVE DRG NO 3120 004647 C Nonestab
11) PLUNGER LOCKING[90]() Specification : PLUNGER LOCKING C Nonestab
12) PLUNGER DRG NO BOF 6001528[90]() Specification : PLUNGER DRG NO BOF 6001528 C Nonestab
13) PIPE TO DRG NO 4710 040701[90]() Specification : PIPE TO DRG NO 4710 040701 C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) ADAPTOR FUNNEL TO DRG NO 4933 000052[90]() Specification : ADAPTOR FUNNEL TO DRG. NO. 4933-000052 C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) MACHINED CASTING BEARING HOUSING AS PER GCF DRG NO GCF 50 40865[90]() Specification : MACHINED CASTING BEARING HOUSING AS PER GCF DRG NO GCF 50 40865 C Nonestab
2) MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40878[90]() Specification : MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40878 C Nonestab
3) MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40879[90]() Specification : MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40879 C Nonestab
4) MACHINED CASTING HOUSING LEFT AS PER GCF DRG NO GCF 50 40857[90]() Specification : MACHINED CASTING HOUSING LEFT AS PER GCF DRG NO GCF 50 40857 C Nonestab
5) MACHINED CASTING TRAIL BEARING LEFT AS PER GCF DRG NO GCF 50 40859[90]() Specification : MACHINED CASTING TRAIL BEARING LEFT AS PER GCF DRG NO GCF 50 40859 C Nonestab
6) MACHINED CASTING HOUSING RIGHT AS PER GCF DRG NO GCF 50 40856[90]() Specification : MACHINED CASTING HOUSING RIGHT AS PER GCF DRG NO GCF 50 40856 C Nonestab
7) MACHINED CASTING TRAIL BEARING RIGHT AS PER GCF DRG NO GCF 50 40858[90]() Specification : MACHINED CASTING TRAIL BEARING RIGHT AS PER GCF DRG NO GCF 50 40858 C Nonestab
8) MACHINED CASTING AS PER GCF DRG NO GCF 50 40891[90]() Specification : MACHINED CASTING AS PER GCF DRG NO GCF 50 40891 C Nonestab
9) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40890[90]() Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40890 C Nonestab
10) PLATE AS PER DRAWING NO 5183023[90]() Specification : PLATE AS PER DRAWING NO 5183023 C Nonestab
11) PLATE AS PER DRAWING NO 4077475[90]() Specification : PLATE AS PER DRAWING NO.4077475 C Nonestab
12) PLATE AS PER DRAWING NO 5167374[90]() Specification : PLATE AS PER DRAWING NO 5167374 C Nonestab
13) PLATE AS PER DRAWING NO 5175362[90]() Specification : PLATE AS PER DRAWING NO.5175362 C Nonestab
14) BASE PLATE AS PER DRG NO 3052701[90]() Specification : BASE PLATE AS PER DRG NO 3052701 C Nonestab
15) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40862[90]() Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40862 C Nonestab
16) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863[90]() Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863 C Nonestab
17) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864[90]() Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864 C Nonestab
18) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892[90]() Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892 C Nonestab
19) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889[90]() Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889 C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) LEVER RIGHT TO PART NO BOF 5047788[90]() Specification : LEVER RIGHT TO PART NO BOF 504778 C Nonestab
2) LEVER TO PART NO 6121855[90]() Specification : LEVER TO PART NO 6121855 C Nonestab
3) LEVER VSG TILTING BOX TO PART NO BOF 5050320[90]() Specification : LEVER VSG TILTING BOX TO PART NO BOF 5050320 C Nonestab
4) LEVER TO PART NO BOF 5050320 2[90]() Specification : LEVER TO PART NO BOF 5050320 2 C Nonestab
5) BRAKE LINING W O CHAMFER 5047799[90]() Specification : BRAKE LINING W O CHAMFER 5047799 C Nonestab
6) LEVER RIGHT TO DRG NO DS CAT 1015 000771[90]() Specification : LEVER RIGHT TO DRG NO DS CAT 1015 000771 C Nonestab
7) SHAFT IFL 7962 TO DRG NO IFL 7962[90]() Specification : SHAFT IFL 7962 TO DRG NO IFL 7962 C Nonestab
8) MAGNETIC PLUG 6123344[90]() Specification : MAGNETIC PLUG 6123344 C Nonestab
9) SHIM BEARING COVER TO DRG 6108636[90]() Specification : SHIM BEARING COVER TO DRG 6108636 C Nonestab
10) FORK BOF 6125104[90]() Specification : FORK BOF 6125104 C Nonestab
11) DIP STICK WELDING FOR HYDRAULIC SYSTEM TO PART NO BOF 6125104[90]() Specification : DIP STICK WELDING FOR HYDRAULIC SYSTEM TO PART NO BOF 6125104 C Nonestab
12) END FORKED TO PT NO BOF 6002483[90]() Specification : END FORKED TO PT NO BOF 6002483 C Nonestab
13) PIN SPRING BOLT TO PT BOF 6003012[90]() Specification : PIN SPRING BOLT TO PT BOF 6003012 C Nonestab
14) PIN SECURING TO PART NO 6115897[90]() Specification : PIN SECURING TO PART NO 6115897 C Nonestab
15) PLATE LOCKING PISTON JOINT PIN TO PART NO BOF 6108932[90]() Specification : PLATE LOCKING PISTON JOINT PIN TO PART NO BOF 6108932 C Nonestab
16) GUIDE PISTON FRONT TO PART 5050115[90]() Specification : GUIDE PISTON FRONT TO PART 5050115 C Nonestab
Category :
Grade : Grade III
Size : SS
458 LAVEENA ENGINEERING
6/1A, 428/488, Vishwaneedam Post, Arunodaya School Road,Sunkadakatte, BANGALORE Karnataka
PIN1 : 560091
Phone No. : 29770612
GSTIN : 29AAAFL4187B1ZF 		BLRL01276C

Download 		1Gun Carriage Factory

Name Specification Use Status
1) GUIDE PISTON TO PT BOF 6115656[90]() Specification : GUIDE PISTON TO PT BOF 6115656 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) SHOCK ABSORBER TO DRG NO 1160278[90]() Specification : SHOCK ABSORBER TO DRAWING.NO.1160278 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) TRAIL LOCKING BAR LEFT AND RIGHT TO PART NO 1147189 AS PER ANNEXURE NO DHANUSH 1147189 2017[90]() Specification : TRAIL LOCKING BAR LEFT & RIGHT TO PART NO. 1147189, AS PER ANNEXURE NO. DHANUSH/1147189/2017. C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9081005703 LOCK LID CAP TO DRAWING NO RP971674[90]() Specification : LOCK/LID(CAP) TO DRAWING NO.RP 971674 C Nonestab
2) 9081005704 LOCK LID CAP TO DRAWING NO RP971675[90]() Specification : LOCK LID(CAP) TO DRAWING NO.RP 971675 C Nonestab
3) 9081001242 PROTECTIVE GEAR PART NO 1156272D[90]() Specification : PROTECTIVE GEAR AS PER THE DESCRIPTION AND BILL OF MATERIAL (enclosed) PART NO 1156272D. C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) FABRICATION AND MACHININGH OF BRACKET[90]() Specification : FABRICATION AND MACHININGH OF BRACKET C Nonestab
2) 9069112768 RING WELDING AND MACHINING BOF 4020632[90]() Specification : 9069112768 RING WELDING AND MACHINING BOF 4020632 C Nonestab
3) RINGH WELDING AND MACHINING BOF 4026964[90]() Specification : RINGH WELDING AND MACHINING BOF 4026964 C Nonestab
4) RINGH WELDING AND MACHINING TO PART NO BOF 4020632[90]() Specification : RINGH WELDING AND MACHINING TO PART NO BOF 4020632 C Nonestab
5) PEDAL WELDING AND MACHINING 5045062[90]() Specification : PEDAL WELDING AND MACHINING 5045062 C Nonestab
6) COVER WELDING AND MACHINING TO DRG NO 3019272[90]() Specification : COVER WELDING AND MACHINING TO DRG NO 3019272 C Nonestab
7) LEVER WELDING AND MACHINING DRG NO 6098805[90]() Specification : LEVER WELDING AND MACHINING DRG NO 6098805 C Nonestab
8) MACHINING OF RACK EXTERNAL INTER[90]() Specification : MACHINING OF RACK EXTERNAL TO DRG.NO.3013787 & RACK INTERNAL TO DRG.NO.3031977. (FORGED RING WILL BE SUPPLIED BY GCF AFTER HEAT TREATMENT AT GCF) C Nonestab
9) PLATE TOP WELDING MACHINING TO DRG NO 3021409[90]() Specification : PLATE TOP WELDING & MACHINING TO DRG.NO.3021409 C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STUD BAYONET FOR CARBINE 9 MM[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STUD BAYONET FOR CARBINE 9 MM[70]() Specification : STUD BAYONET DS CAT NO-5307-000965 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24785-SA-DT.26-07-2000. C Nonestab
2) SCABBARD BAYONET FOR CARBINE 9MM[70]() Specification : SCABBARD BAYONET NO-5 MK-1,DS.CAT.NO. 1095-000057 DC(I)NO 22606-SA ,DT. 20/07/94 C Nonestab
3) PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95.[70]() Specification : PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95. C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STUD BAYONET FOR CARBINE 9 MM[70]() Specification : AS PER DRAWING C Nonestab
2) PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95.[70]() Specification : PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95. C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9069111475 RECOIL BUFFER ASSY IN FINISHED CONDITION TO DRG NO IAN 29A 3019990[90]() Specification : RECOIL BUFFER ASSY IN FINISHED CONDITION TO DRG NO IAN 29A 3019990 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9069111475 RECOIL BUFFER ASSY IN FINISHED CONDITION TO DRG NO IAN 29A 3019990[90]() Specification : RECOIL BUFFER ASSY IN FINISHED CONDITION TO DRG NO IAN 29A 3019990 C Nonestab
2) PISTON ROD TO DRG NO 4024497[90]() Specification : PISTON ROD TO DRG.NO.4024497. C Nonestab
3) 9069112386 ROD PISTON FOR BUFFER DRG IAN 47SA[90]() Specification : 9069112386 ROD PISTON(FOR BUFFER)DRG.IAN-47SA C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) SHAFT IFL-7962 TO DRG. NO. IFL-7962[90]() Specification : SHAFT IFL-7962 TO DRG. NO. IFL-7962 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9069111916 FORGING DRAWING FOR LEG TO DRG NO GCF LM 1065B REF DRG NO 3015284[90]() Specification : (FORGING DRAWING) FOR LEG TO DRG. NO.GCF LM-1065(B) REF.DRG. NO. 3015284. C Nonestab
2) 9070056913 LEG SEMI TRAILER RETRACTABLE SUPPORT TO DRG NO 2590001789[90]() Specification : LEG SEMI TRAILER RETRACTABLE SUPPORT TO DRG.NO. 2590-001789 C Nonestab
3) 9070056922 LEG SEMI TRAILER RETRACTABLE SUPPORT TO DS CAT NO 2590001788[90]() Specification : LEG SEMI-TRAILER RETRACTABLE SUPPORT TO DS CAT NO. 2590-001788 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) LOCK TRAVERSING(FOR BODY) TO DRG. NO. IAN-155-SA[90]() Specification : LOCK TRAVERSING(FOR BODY) TO DRG. NO. IAN-155-SA C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) LOCK TRAVERSING(FOR BODY) TO DRG. NO. IAN-155-SA[90]() Specification : LOCK TRAVERSING(FOR BODY) TO DRG. NO. IAN-155-SA C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9069112794 MALLET ASSY TO DRG NO 4019577 2[90]() Specification : MALLET ASSY.TO DRG.NO.4019577-2 C Nonestab
Category :
Grade : Grade III
Size : S
459 Searock Precision Products Pvt Ltd
C-37, 1st Phase, Kumbalagodu Ind. Area, Mysore Road, Bangalore-560074 KUMBALGOD IND. AREA Banaglore Karnataka
PIN1 : 560074
Phone No. : 28437998
GSTIN : 29AACCS9677G1ZP 		BLRS03546E

Download 		1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR[70]() Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR C Nonestab
Category :
Grade : Grade III
Size : S
460 C-Tel Infosystems Pvt. Ltd.
DSM No. 361-362, 3rd Floor, DLF Towers, Shivaji Marg, New Delhi Shivaji Marg New Delhi Delhi
PIN1 : 110015
Phone No. : 42425500
GSTIN : 36AACCC3264D1Z1 		AACCC3264D

Download 		1Opto Electronic Factory

Name Specification Use Status
1) TRANSISTOR 2T866A LF NO 7441121063[74]() Specification : TRANSISTOR 2T866A Drg No.AAO.339.431TU TRANSISTOR 2T866A AS PER SPECN. NO. AAO.339.431 TU C Nonestab
2) TRANSISTOR 2T874A LF NO 7441121064[74]() Specification : TRANSISTOR 2T874A Drg No.AAO.339.571TU TRANSISTOR 2T874A AS PER SPECN. NO. AAO.339.571TU C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) CHANGEOVER SWITCH LF NO 7441120220[74]() Specification : CHANGEOVER SWITCH PG2-9-6P2NVK Drg No.OYUO. 360.068 TU CHANGEOVER SWITCH PG2-9-6P 2N VK AS PER DRG. NO. OYUO.360.068 T U C Nonestab
2) RESISTOR SP5 LF NO 7441120449[74]() Specification : RESISTOR SP5-21A-1-4.7 KOHM Drg No.OZHO468530TY RESISTOR SP5-21A-1-4.7 KOHM +/ -0.5% AS PER DRG.NO.OZHO468530 TY C Nonestab
3) SMD RELAY TQ2SA24ULCSA LF NO 7441122093[74]() Specification : SMD RELAY TQ2SA24ULCSA SMD RELAY TQ2SA24ULCSA C Nonestab
4) CONNECTOR P 2RMG18B7SH1E2B LF NO 9927083887[99]() Specification : CONNECTOR(P), 2RMG18B7SH1E2B CONNECTOR-PLUG 2RMG18B7SH1E2B , AS PER SPECN.NO:OLF/AL/CON/02 /H AND JSS-50860 C Nonestab
5) MOTOR DPR LF NO 7441120443[74]() Specification : MOTOR DPR-42-N1-03 Drg No.OST160515007.74 MOTOR DPR-42-N1-03 AS PER DRG. NO.OST160515007.74 C Nonestab
6) MOTOR DPM LF NO 9001120758[90]() Specification : MOTOR DPM 25-N1-01 MOTOR DPM 25-N1-01 SPCN NO OST 160.515.022-76 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) GYROMOTOR LF NO 9927091340[99]() Specification : GYROMOTOR,GA7/30A-2M, Drg No.BL2561005 GYROMOTOR,GA7/30A-2M AS PER SPECN.NO: BL2.561.005TU C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) TRANSFORMER LF NO 7441121050[74]() Specification : TRANSFORMER Drg No.9S831.250 TRANSFORMER AS PER DRG.NO. 9S831.250 C Nonestab
2) RELAY LF NO 7441121164[74]() Specification : RELAY REK 60V RVIM.647612.027- Drg No.RVIM.647612.027 TU RELAY REK 60V RVIM.647612.027- 07 AS PER SPECN. NO. RVIM.6476 12.027 TU C Nonestab
3) TRANSFORMER LF NO 7441121184[74]() Specification : TRANSFORMER TO.5-36 Drg No.OUO.472.021 TU TRANSFORMER TO.5-36 AS PER SPE CN NO. OUO.472.021 TU C Nonestab
4) TRANSFORMER LF NO 7441121186[74]() Specification : TRANSFORMER TOT-84 Drg No.OUO.472.010 TU TRANSFORMER TOT-84 AS PER SPEC N NO. OUO.472.010 TU C Nonestab
5) TRANSFORMER LF NO 7441121187[74]() Specification : TRANSFORMER TPP 10-40-400 Drg No.OUO.471.000 TU TRANSFORMER TPP 10-40-400 AS P ER SPECN. NO. OUO.471.000 TU C Nonestab
6) TRANSFORMER LF NO 7441121188[74]() Specification : TRANSFORMER TPP 12-40-400 Drg No.OUO.471.000 TU TRANSFORMER TPP 12-40-400 AS P ER SPECN. NO. OUO.471.000 TU C Nonestab
7) TRANSFORMER LF NO 7441121189[74]() Specification : TRANSFORMER TPP 272-40-400 Drg No.OUO.471.000 TU TRANSFORMER TPP 272-40-400 AS PER SPECN. NO. OUO.471.000 TU C Nonestab
8) TRANSFORMER LF NO 7441121766[74]() Specification : TRANSFORMER TO.5-15 Drg No.OUO.472.021 TY TRANSFORMER TO.5-15 AS PER SPE CN. NO. OUO.472.021 TY C Nonestab
9) RELAY LF NO 7441122619[74]() Specification : RELAY REK60V,RVIM647612.027-05 Drg No.RVIM647612.027 TU RELAY REK-60V, RVIM647612.027- 05 AS PER SPECN. NO. RVIM647612.027 TU C Nonestab
10) CORE LF NO 7441122705[74]() Specification : CORE M2000 NM1-27 B18 II Drg No.PYO.707.231 TU CORE M2000 NM1-27 B18 II AS PER SPECN. NO. PYO.707.231 TU C Nonestab
Category :
Grade : Grade III
Size : S

Copyright © 2025 - OFB