24) Steel Blank for Plunger handle carrying DRG. No. SK-5273()
As per Drg.
C
Not Estab
25) Pin straight headless for extractor DRG. No. SK-2689/71()
As per Drg.
C
Not Estab
26) Lever Extractor PH-1-7()
As per Drg.
C
Not Estab
27) Sleeve gas regulator DRG. No. 3120-004755()
As per Drg.
C
Not Estab
28) Guide upper left DRG. No. 1005-006836()
As per Drg.
C
Not Estab
29) Axis cylinder DRG. No. MK-III-PH-3-2()
As per Drg.
C
Not Estab
30) Flash absorver ()
As per Drg.
C
Not Estab
31) Steel blank for eliminator flash()
As per Drg.
C
Not Estab
32) Cylinder blank DRG. No. PH-4-1SK-4912*1()
As per Drg.
C
Not Estab
33) Centre pin ()
As per Drg.
C
Not Estab
34) Bush for guide blank()
As per Drg.
C
Not Estab
Category : P
Grade : II
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FINISHED COMPONENT TRIGGER FOR RIFLE 5.56MM INSAS.()
AS PER DRAWING.
C
Not Estab.
Category : P
Grade : II
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) RIVET FRONT BLOCK AND SIDE PLATE DRG No 876C FOR MAG
Description : RIVET FRONT BLOCK AND SIDE PLATE DRG No 876C FOR MAG()
Specification : DRG NO. SKM 876C FOR RIVET FRONT BLOCK & SIDE PLATE
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PIN FIXING LUG TRIPOD TO DRG NO ARDE SK 3145 21 DS CAT NO 5315 009731 IN FINISHED CONDITION
Description : PIN FIXING LUG TRIPOD TO DRG NO ARDE SK 3145 21 DS CAT NO 5315 009731 IN FINISHED CONDITION()
Specification : PIN FIXING LUG TRIPOD TO DRG NO ARDE SK 3145 21 DS CAT NO 5315 009731 IN FINISHED CONDITION
C
Estab
Category : p
Grade : 2
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PIN STUD COCKING and RECOIL FOR JVPC
Description : PIN STUD COCKING and RECOIL FOR JVPC()
Specification : PIN STUD COCKING & RECOIL FOR JVPC 5.56 MM AS PER DRAWING NO (0204 03 04 00 01 014 00DA)
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) ROD NUT()
AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
C
NOT ESTAB.
2) GLAND NUT()
AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
C
NOT ESTAB.
3) RULE()
AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
C
NOT ESTAB.
4) WASHER SPRING TENSION()
AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
C
NOT ESTAB.
5) RING ROTATING()
AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
C
NOT ESTAB.
6) SHUT OF VALVE()
AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
C
NOT ESTAB.
7) BUSHING MACHINE THREAD()
AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
C
NOT ESTAB.
8) NUT PLAIN ROUND()
AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
C
NOT ESTAB.
9) BUSHING SLEEVE()
AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
C
NOT ESTAB.
Category : DDP
Grade : III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Pin Locking Butt Arms for JVPC
Description : Pin Locking Butt Arms for JVPC()
Specification : Pin Locking Butt Arms for JVPC 5.56MM as per drawing No. (0204-03-04-00-03-007-00DA)
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) RIVET GUIDE UPPER FOR MAG
Description : RIVET GUIDE UPPER FOR MAG()
Specification : RIVET GUIDE UPPER TO DS CAT NO. 5320 - 000953 DC(I) NO. 27286-SA DT- 04.02.21 IN FINISHED CONDITION.
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PIN COCKING HANDLE FOR JVPC
Description : PIN COCKING HANDLE FOR JVPC()
Specification : PIN COCKING HANDLEFOR JVPC 5.56MM AS PER DRAWING NO. 0204-03-04-01-12-007-00DA
C
Estab
2) PIN TRIGGER GUARD FOR JVPC
Description : PIN TRIGGER GUARD FOR JVPC()
Specification : PIN TRIGGER GUARD FOR JVPC 5.56MM AS PER DRAWING NO. 0204-03-04-00-02-003-00DA
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PIN GAS BLOCK AND BRACKET FORE SIGHT FOR JVPC
Description : PIN GAS BLOCK AND BRACKET FORE SIGHT FOR JVPC()
Specification : PIN GAS BLOCK & BRACKET FORE SIGHT FOR JVPC 5.56 MM AS PER DRAWING (204-03-04-11-18-006-00DA)
C
Estab
2) PIN COCKING BRACKET FOR JVPC
Description : PIN COCKING BRACKET FOR JVPC()
Specification : PIN COCKING BRACKET FOR FOR JVPC 5.56MM AS PER DRAWING NO. (0204-03-04-11-18-005-00DA)
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PIN STRAIGHT HEADLESS FIXING BRACKET IN FINISHED CONDITION
Description : PIN STRAIGHT HEADLESS FIXING BRACKET IN FINISHED CONDITION()
Specification : PIN STRAIGHT HEADLESS FIXING BRACKET IN FINISH COND. TO DS CAT NO. 5315-009261 DC(I) NO. 26934-SA DT. 07.09.16
R
Estab
2) SCREW SOCKET HEAD TO DS CAT NO 5305 005082 IN FINISHED CONDITION FOR CARBINE 9MM
Description : SCREW SOCKET HEAD TO DS CAT NO 5305 005082 IN FINISHED CONDITION FOR CARBINE 9MM()
Specification : SCREW SOCKET HEAD TO DS CAT NO. 5305-005082 DC(I)26372-SA DT 16.08.07 FINISHED CONDITION
R
Estab
3) SET SCREW DSCAT NO 5305 005083 IN FINISHED CONDITION FOR CARBINE 9MM
Description : SET SCREW DSCAT NO 5305 005083 IN FINISHED CONDITION FOR CARBINE 9MM()
Specification : SET SCREW,DSCAT NO. 5305-005083 IN FINISHED CONDITION D C (I) NO.26372-SA DT.16-08-2007
C
Estab
4) PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK III DRG NO PHMK III 1 2 THROUGH MIM ROUTE
Description : PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK III DRG NO PHMK III 1 2 THROUGH MIM ROUTE()
Specification : PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-2, D.A. NO. 05/18 DT.07.03.2018. THROUGH MIM ROUTE.
C
Estab
5) LEVER EXTRACTOR FOR REVOLVER
Description : LEVER EXTRACTOR FOR REVOLVER()
Specification : LEVER EXTRACTOR DRG.NO.PH-1-7 IN FINISHED CONDITION D.A. NO. 05/18 DT. 07-03-18.
C
Estab
6) DETENT STUD COCKING SLIDE for MAG
Description : DETENT STUD COCKING SLIDE for MAG()
Specification : DETENT STUD COCKING SLIDE TO DS CAT NO. 5307-004452 DC(I) NO. 27020-SA DT- 28.01.17 IN FINISHED CONDITION.
9) RIVET FRONT BLOCK AND SIDE PLATE BIG
Description : RIVET FRONT BLOCK AND SIDE PLATE BIG()
Specification : DRG NO SKM 876E FOR FRONT BLOCK & SIDE PLATE
C
Estab
10) RIVET,COCKING H GUIDE & LOCKING SHOULDER TO DRG NO. SKM 876F FOR COCKING H/GUIDE & LOCKING SHOULDER
Description : RIVET,COCKING H GUIDE & LOCKING SHOULDER TO DRG NO. SKM 876F FOR COCKING H/GUIDE & LOCKING SHOULDER()
Specification : RIVET,COCKING H GUIDE & LOCKING SHOULDER TO DRG NO. SKM 876F FOR COCKING H/GUIDE & LOCKING SHOULDER
C
Estab
11) SCREW MACHINE FOR PLUG OBTURATIVE HOLE FOR INFRARED RAY PROT ECTOR SUPPORT SCREW DS CAT NO. 5305-011218 DC (I) NO. 25349-SA DT. 30.04.02. IN FINISHED CONDITION.
Description : SCREW MACHINE FOR PLUG OBTURATIVE HOLE FOR INFRARED RAY PROT ECTOR SUPPORT SCREW DS CAT NO. 5305-011218 DC (I) NO. 25349-SA DT. 30.04.02. IN FINISHED CONDITION.()
Specification : SCREW MACHINE FOR PLUG OBTURATIVE HOLE FOR INFRARED RAY PROT ECTOR SUPPORT SCREW DS CAT NO. 5305-011218 DC (I) NO. 25349-SA DT. 30.04.02. IN FINISHED CONDITION.
C
Estab
12) Guide upper Left for MAG
Description : Guide upper Left for MAG()
Specification : .GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 27011-SA DT.14.01.17 IN FINISHED CONDITION.
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Steel Blank for Plunger handle carrying FOR LMG 5 56
Description : Steel Blank for Plunger handle carrying FOR LMG 5 56()
Specification : STEEL BLANK FOR PLUNGER HANDLE CARRYING TO DRG.NO-SK-5273.
C
Estab
2) Fore Sight Drg. No. ARDE SK 3143/1
Description : Fore Sight Drg. No. ARDE SK 3143/1()
Specification : AS PER DRG
C
Estab
3) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM
Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM()
Specification : ARDE SK 3143/42
C
Estab
4) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56
Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56()
Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH
9) Housing Plunger to DS CAT NO 1005 007900
Description : Housing Plunger to DS CAT NO 1005 007900()
Specification : HOUSING PLUNGER TO DRG.NO. ARDE SK-2825/33 IN FINISHED CONDN DS.CAT.NO.1005-007900 DC(I) NO.26948-SA,DATED 26.09.16
C
Estab
10) PLUNGER DRG NO.ARDE SK 2825/34
Description : PLUNGER DRG NO.ARDE SK 2825/34()
Specification : AS PER DRG.
C
Estab
11) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K
Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K()
Specification : AS PER DRG.
C
Estab
12) PIN STRAIGHT HEADLESS FIXING BRACKET IN FINISHED CONDITION
Description : PIN STRAIGHT HEADLESS FIXING BRACKET IN FINISHED CONDITION()
Specification : PIN STRAIGHT HEADLESS FIXING BRACKET IN FINISH COND. TO DS CAT NO. 5315-009261 DC(I) NO. 26934-SA DT. 07.09.16
C
Estab
13) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56
Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56()
Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016
C
Estab
14) Pin grooved Headed for Hinge cover for Carbine 5 56
Description : Pin grooved Headed for Hinge cover for Carbine 5 56()
Specification : PIN GROOVED HEADED FOR HINGE COVER TO DRG. NO.ARDE/SK- 3143/29.DS CAT NO.5315-009188 DC(I) NO.26927-SA DT.02.09.16
C
Estab
15) STUD COCKING HANDLE FOR INSAS 5.56 MM
Description : STUD COCKING HANDLE FOR INSAS 5.56 MM()
Specification : AS PER DRAWING
C
Estab
16) PIN GROOVED HD FOR HAMMER OF SMALL ARMS
Description : PIN GROOVED HD FOR HAMMER OF SMALL ARMS()
Specification : AS PER DRAWING
C
Estab
17) SCREW FRONT SLING LOOP FOR LMG 5 56
Description : SCREW FRONT SLING LOOP FOR LMG 5 56()
Specification : SCREW FRONT SLING LOOP TO DRG. NO. ARDE SK- 3145/29,DS CAT NO. 5305-018855 DC(I) NO. 26950-SA, DT. 27.09.16
C
Estab
18) Pin straight headless for extractor DRG. No. SK-2689/71
Description : Pin straight headless for extractor DRG. No. SK-2689/71()
Specification : As per Drg.
C
Estab
19) Pin Straight Head Less (Block Gas) drg .no. 5315-009260 for LMG 5.56mm
Description : Pin Straight Head Less (Block Gas) drg .no. 5315-009260 for LMG 5.56mm()
Specification : AS PER DRG.
C
Estab
20) Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186
Description : Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186()
Specification : AS PER DRG.
C
Estab
21) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56
Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56()
Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16
C
Estab
22) HOOK TO DS CAT NO 5340 015108
Description : HOOK TO DS CAT NO 5340 015108()
Specification : HOOK TO DRG. NO. ARDE/TA/94/27 DS CAT NO 5340-015108 DC(1)26928-SA DT.02-09-16
C
Estab
23) Bearing back sight pin
Description : Bearing back sight pin()
Specification : BEARING BACK SIGHT PIN,D S CAT NO-1005-000825 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)26877-SA-DT.27-06-16
26) Dowel barrel support DS CAT No 1005 000865
Description : Dowel barrel support DS CAT No 1005 000865()
Specification : DOWEL BARREL SUPPORT D S CAT NO-1005-000865 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)-26881-SA DT.01-07-16.
C
Estab
27) PIN LOCATING,DS CAT NO.1005-000885 IN FINISHED CONDITION REQ UIRED FOR CARBINE 9MM DC(I) NO. 26884-SA, DT. 05-07-16.
Description : PIN LOCATING,DS CAT NO.1005-000885 IN FINISHED CONDITION REQ UIRED FOR CARBINE 9MM DC(I) NO. 26884-SA, DT. 05-07-16.()
Specification : PIN LOCATING,DS CAT NO.1005-000885 IN FINISHED CONDITION REQ UIRED FOR CARBINE 9MM DC(I) NO. 26884-SA, DT. 05-07-16.
C
Estab
28) Body ForeSight drg .no. 1005-000896 for Carbine 9mm
Description : Body ForeSight drg .no. 1005-000896 for Carbine 9mm()
Specification : BODY FORE SIGHT DS CAT NO 1005-000896 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)20697-SA-DATED-29-03-1990.,
C
Estab
29) Pin butt DS CAT No 5315 009110 in finished condition
Description : Pin butt DS CAT No 5315 009110 in finished condition()
Specification : PIN BUTT D S CAT NO-5315-009110 IN FINISHED CONDITION OF SMG9MM CARBINE 1A1.DC(I)-26908-SA DT.05.08.16
C
Estab
30) PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07.
Description : PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07.()
Specification : PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07.
C
Estab
31) PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94.
Description : PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94.()
Specification : PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94.
C
Estab
32) RIVET SPRING LEVER LOCKING,DS CAT 5320-001031 IN FINISHED CO NDITION REQUIRED FOR 9MM CARBINE DC(I) NO. 25066-SA, DT. 10-07-2001
Description : RIVET SPRING LEVER LOCKING,DS CAT 5320-001031 IN FINISHED CO NDITION REQUIRED FOR 9MM CARBINE DC(I) NO. 25066-SA, DT. 10-07-2001()
Specification : RIVET SPRING LEVER LOCKING,DS CAT 5320-001031 IN FINISHED CO NDITION REQUIRED FOR 9MM CARBINE DC(I) NO. 25066-SA, DT. 10-07-2001
C
Estab
33) PIN SPRING STOP DS CAT NO 5315 002026 IN FINISHED CONDITION FOR CARBINE 9MM
Description : PIN SPRING STOP DS CAT NO 5315 002026 IN FINISHED CONDITION FOR CARBINE 9MM()
Specification : PIN SPRING STOP DS CAT NO 5315-002026 DC(I)NO.24969 DATED 19-03-2001 IN FINISHED CONDITION
C
Estab
34) SCREW SOCKET HEAD TO DS CAT NO 5305 005082 IN FINISHED CONDITION FOR CARBINE 9MM
Description : SCREW SOCKET HEAD TO DS CAT NO 5305 005082 IN FINISHED CONDITION FOR CARBINE 9MM()
Specification : SCREW SOCKET HEAD TO DS CAT NO. 5305-005082 DC(I)26372-SA DT 16.08.07 FINISHED CONDITION
C
Estab
35) SET SCREW DSCAT NO 5305 005083 IN FINISHED CONDITION FOR CARBINE 9MM
Description : SET SCREW DSCAT NO 5305 005083 IN FINISHED CONDITION FOR CARBINE 9MM()
Specification : SET SCREW,DSCAT NO. 5305-005083 IN FINISHED CONDITION D C (I) NO.26372-SA DT.16-08-2007
38) Lever Extractor PH-1-7
Description : Lever Extractor PH-1-7()
Specification : As per Drg.
C
Estab
39) Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97
Description : Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97()
Specification : AS PER DRG.
C
Estab
40) CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-2 ALT D.A.NO. 56/08 , DT. 10-09-08
Description : CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-2 ALT D.A.NO. 56/08 , DT. 10-09-08()
Specification : CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-2 ALT D.A.NO. 56/08 , DT. 10-09-08
C
Estab
41) KNOB GAS REG SCREW DS CAT 1005-000417
Description : KNOB GAS REG SCREW DS CAT 1005-000417()
Specification : AS PER DRG
C
Estab
42) DETENT STUD COCKING SLIDE for MAG
Description : DETENT STUD COCKING SLIDE for MAG()
Specification : DETENT STUD COCKING SLIDE TO DS CAT NO. 5307-004452 DC(I) NO. 27020-SA DT- 28.01.17 IN FINISHED CONDITION.
C
Estab
43) BUFFER PLATE TO DS CAT NO. 1005-000573 DC(I) NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.
Description : BUFFER PLATE TO DS CAT NO. 1005-000573 DC(I) NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.()
Specification : BUFFER PLATE TO DS CAT NO. 1005-000573 DC(I) NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.
C
Estab
44) PLUNGER SPRING CATCH BUFFER BODY FOR MAG
Description : PLUNGER SPRING CATCH BUFFER BODY FOR MAG()
52) RIVET, KNOB BARREL LOCKING CATCH TO DS CAT NO. 5320-000955 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION.
Description : RIVET, KNOB BARREL LOCKING CATCH TO DS CAT NO. 5320-000955 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION.()
Specification : RIVET, KNOB BARREL LOCKING CATCH TO DS CAT NO. 5320-000955 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION.
C
Estab
53) SCREW MACHINE FOR PLUG OBTURATIVE HOLE FOR INFRARED RAY PROT ECTOR SUPPORT SCREW DS CAT NO. 5305-011218 DC (I) NO. 25349-SA DT. 30.04.02. IN FINISHED CONDITION.
Description : SCREW MACHINE FOR PLUG OBTURATIVE HOLE FOR INFRARED RAY PROT ECTOR SUPPORT SCREW DS CAT NO. 5305-011218 DC (I) NO. 25349-SA DT. 30.04.02. IN FINISHED CONDITION.()
Specification : SCREW MACHINE FOR PLUG OBTURATIVE HOLE FOR INFRARED RAY PROT ECTOR SUPPORT SCREW DS CAT NO. 5305-011218 DC (I) NO. 25349-SA DT. 30.04.02. IN FINISHED CONDITION.
C
Estab
54) GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 25338-SA DT-23.4.02 IN FINISHED CONDITION./
Description : GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 25338-SA DT-23.4.02 IN FINISHED CONDITION./()
Specification : GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 25338-SA DT-23.4.02 IN FINISHED CONDITION./
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PIN TRIGGER AND SAFETY SEAR IN FINISHED CONDITION FOR CARBINE 5 56 MM
Description : PIN TRIGGER AND SAFETY SEAR IN FINISHED CONDITION FOR CARBINE 5 56 MM()
Specification : PIN TRIGGER & SAFETY SEAR DRG NO AKC 01/13*FOR CARBINE 5.56 MM IN FINISHED CONDITION.
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PIN GROOVED HEADED FOR TRIGGER AND SAFETY SEAR FOR INSAS 5.56 MM
Description : PIN GROOVED HEADED FOR TRIGGER AND SAFETY SEAR FOR INSAS 5.56 MM()
Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C
C
Nonestab
2) TORSION BAR 765 58 191[90]()
Specification : TORSION BAR DRG NO 765-58-191
C
Nonestab
3) Torsion Bar Gost Std Wire[90]()
Specification : Torsion Bar Gost Std./Wire Drg. No. 675-58-74/A
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) FORG FOR STEERING LEVER BS3[90]()
Specification : FORG.FOR STEERING LEVER, PART NO.X3206711-3
C
Nonestab
2) FORG FOR OUT PUT SHAFT REAR[90]()
Specification : FORGING FOR OUT PUT SHAFT REAR STALLION BS-III VEHICLE, PART NO X3303311-3(R2)
C
Nonestab
3) FORGING FOR OUT PUT SHAFT FT[90]()
Specification : FORGING FOR OUT PUT SHAFT FRONT, DRG. NO.PS3344611(R2)
C
Nonestab
4) FORG FOR LAY SHAFT STLN BS 3[90]()
Specification : FORG. FOR LAY SHAFT, STLN.-BS-III, PART NO. X3303211-3(R1)
C
Nonestab
5) FORG FOR INPUT SHAFT STLN BS 3[90]()
Specification : FORG. FOR INPUT SHAFT, STLN.-BS-III, PART NO. X3303611-3(R1)
C
Nonestab
6) FORG FOR GEAR ON LAY SHAFT GEAR LAY SHAFT[90]()
Specification : FORG. FOR GEAR ON LAY SHAFT/GEAR LAY SHAFT, STLN- BS-III, PART NO. X1602611-3(R2)
C
Nonestab
7) FORG FOR SPUR GEAR GEAR INPUT LOW[90]()
Specification : FORG. FOR GEAR INPUT LOW, STLN- BS-III, PT. NO. X1602411-3 (R1)
C
Nonestab
8) FORG FOR GEAR INPUT HIGH BS 3[90]()
Specification : FORG. FOR GEAR INPUT HIGH, STLN- BS-III, PART NO. X1601211-3(R1)
C
Nonestab
9) FORG DRIVING FLANGE[90]()
Specification : FORGING FOR DRIVING FLANGE DRG.NO. PS1433111(R1)
C
Nonestab
10) FORG FOR RING FOR OIL SEAL INNER[90]()
Specification : FORGING FOR RING FOR OIL SEAL INNER, DRG. No.F 0741111-3
C
Nonestab
11) FORG FOR RING FOR OIL SEAL OUTER[90]()
Specification : FORGING FOR RING FOR OIL SEAL OUTER, DRG. No. F 0741011 -3
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Engine Factory Avadi
[ENR Registration]
Name
Specification
Use
Status
1) INTAKE CAMSHAFT OPN 40
20-07-06A()
Specification : 20-07-06A
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Engine Factory Avadi
[ENR Registration]
Name
Specification
Use
Status
1) GEAR (Forging)
3308-62()
Specification : 3308-62
R
Estab
2) TGD SHAFT opn.30
20-08-214-4()
Specification : 20-08-214-4
C
Estab
Category : dp
Grade : 3
Size :
S
1) Engine Factory Avadi
[ENR Registration]
Name
Specification
Use
Status
1) CAP(Forging)
301-50-5 & 43-7()
Specification : 301-50-5 & 43-7
R
Estab
2) THRUST BEARING CAP (Forging)
3301-48-5A()
Specification : 3301-48-5A
R
Estab
Category : ddp
Grade : 3
Size :
S
1) Engine Factory Avadi
[ENR Registration]
Name
Specification
Use
Status
1) PLUG (305-08-2A)()
Specification : 305-08-2A
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Engine Factory Avadi
[Deemed Registration]
Name
Specification
Use
Status
1) TGD SHAFT OPN NO.30
20-08-214-4()
Specification :TGD SHAFT OPN NO.30
(20-08-214-4)
C
Estab
2) GEAR(Forg) 3308-68()
Specification : GEAR(Forg) 3308-68
R
Estab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING & MACHINING OF TA LINK()
AS PER OFM SPECIFICATION
C
NOT ESTAB
2) FORGING & MACHINING OF TA GUIDE()
AS PER OFM SPECIFICATION
C
NOT ESTAB
3) FORGING & MACHINING OF TA SHOE()
AS PER OFM SPECIFICATION
C
NOT ESTAB
4) FORGING & MACHINING OF TA CLAMP()
AS PER OFM SPECIFICATION
C
NOT ESTAB
5) FORGING & MACHINING OF 81MM()
AS PER OFM SPECIFICATION
C
NOT ESTAB
6) BASE TRANSIT (MCD) 1000LB()
AS PER OFM SPECIFICATION
C
Non Established
7) FILLING PLUG FORGING 1000LB()
AS PER OFM SPECIFICATION
C
Non Established
8) CONTAINER EXPLODER 1000LB()
AS PER OFM SPECIFICATION
C
Non Established
Category : DDP,DP
Grade : I
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING & MACHINING OF TA LINK[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
2) FORGING & MACHINING OF TA GUIDE[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
3) FORGING & MACHINING OF TA SHOE[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
4) FORGING & MACHINING OF TA CLAMP[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
5) FORGING & MACHINING OF 81MM[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
6) BASE TRANSIT (MCD) 1000LB[61]()
Specification : AS PER OFM SPECIFICATIONA
C
Nonestab
7) FILLING PLUG FORGING 1000LB[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
8) CONTAINER EXPLODER 1000LB[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
9) TA BOLT M20 DRG 17255026[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
Category : ddp
Grade : Grade II
Size :
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING & MACHINING OF TA LINK[61]()
Specification : AS PER OFM SPECIFICATION
R
Nonestab
2) FORGING & MACHINING OF TA GUIDE[61]()
Specification : AS PER OFM SPECIFICATION
R
Nonestab
3) FORGING & MACHINING OF TA SHOE[61]()
Specification : AS PER OFM SPECIFICATION
R
Nonestab
4) FORGING & MACHINING OF TA CLAMP[61]()
Specification : AS PER OFM SPECIFICATION
R
Nonestab
5) FORGING & MACHINING OF 81MM[61]()
Specification : AS PER OFM SPECIFICATION
R
Nonestab
6) BASE TRANSIT (MCD) 1000LB[61]()
Specification : AS PER OFM SPECIFICATIONA
R
Nonestab
7) FILLING PLUG FORGING 1000LB[61]()
Specification : AS PER OFM SPECIFICATION
R
Nonestab
8) CONTAINER EXPLODER 1000LB[61]()
Specification : AS PER OFM SPECIFICATION
R
Nonestab
9) TA BOLT M20 DRG 17255026[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
10) FORGING FOR TRACK LINK 6120100104[61]()
Specification : AS PER OFM
C
Estab
11) FORGING FOR GUIDE 6120100103[61]()
Specification : AS PER OFM
C
Estab
12) FORGING FOR SHOE 6120100101[61]()
Specification : AS PER OFM
C
Estab
Category : DDP,DP
Grade : I
Size :
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) TA LINK MACHINED FOLLOWED BY FORGING[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
2) SET OF TA SHOE AND TA GUIDE MACHINED FOLLOWED BY FORGING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
3) FORGING & MACHINING OF TA SHOE[99]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
4) TA CLAMP MACHINED FOLLOWED BY FORGING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
5) FORGING & MACHINING OF 81MM[99]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
6) BASE TRANSIT (MCD) 1000LB[62]()
Specification : AS PER OFM SPECIFICATIONA
C
Nonestab
7) FILLING PLUG FORGING 1000LB[20]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
8) CONTAINER EXPLODER 1000LB[62]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
9) FORGED BODY 81 MM (FRONT PART) (6220000121)[62]()
Specification : FORGED BODY(FRONT PART) TO DRG.NO.-OFM 32817A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
10) FORGED BODY 81 MM (REAR PART) (6220000141)[62]()
Specification : FORGED BODY(REAR PART)TO DRG. NO.-OFM-32818A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
11) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
12) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "
C
Nonestab
13) LUG HOUSING 250 KG (6240100114)[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2
WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Nonestab
14) SET OF TA SHOE AND TA GUIDE FORGING[61]()
Specification : AS PER SPECIFICATION
C
Nonestab
15) SET OF TA SHOE TA GUIDE HEAT TREATED FOLLOWED BY FORGING AND MACHINING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
16) TA CLAMP FORGING[61]()
Specification : AS PER SPECIFICATION
C
Nonestab
17) TA CLAMP HEAT TREATED FOLLOWED BY FORGING AND MACHINING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
18) TA LINK FORGING[61]()
Specification : AS PER SPECIFICATION
C
Nonestab
19) TA LINK HEAT TREATED FOLLOWED BY FORGING AND MACHINING[99]()
3) FORGING OF SLIDE TO DRG. NO. RFI SK-9073 FOR PISTOL[70]()
Specification : As per Drawing
C
Nonestab
Category : p
Grade : Grade I
Size :
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FORGED BLANK FOR ILLUMINATING TIME FUZE BODY TO GSF DRG.NO. F-2316A SPECN.IS:734 GR.24345 WP.[63]()
Specification : AS PER DRG.& SPECIFICATION
R
Nonestab
2) PYT FORGING FOR EXTERNAL CYLINDER AS PER GSF DRG NO 2152 A FOR 73 BMP[71]()
Specification : PYT FORGING FOR EXTERNAL CYLINDER AS PER GSF DRG NO 2152 A FOR 73 BMP (I/C-7133110531)
R
Nonestab
Category : p
Grade : Grade I
Size :
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FORGED BLANK FOR ILLUMINATING TIME FUZE BODY TO GSF DRG.NO. F-2316A SPECN.IS:734 GR.24345 WP.[63]()
Specification : AS PER DRG.& SPECIFICATION
R
Nonestab
2) SET OF FORGING REQUIRED FOR RACE RING CONSISTS OF : (A) FORGING OF LOWER RING TO DRG. NO. AK-630 119-1 (B) FORGING OF UPPER RING TO DRG. NO. AK-630 119-2, (C) FORGING OF INTERNAL RING TO DRG. NO. AK-630 119-25. MAT. SPECIFICATION : GRADE X 2CR13 TO[72]()
Specification : AS PER DRG. & SPECIFICATION
C
Nonestab
Category : p
Grade : Grade I
Size :
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) BUSHING FORGING TO 3906113240[39]()
Specification : 175.24.085/F
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) FLANGE FORGING TO 3901023040[39]()
Specification : 172.23.105/F
R
Nonestab
2) RELEASE RING FORGING TO 3901040031[39]()
Specification : 172.40.225-1/
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun Carriage Factory
Name
Specification
Use
Status
1) FORGINGS OF 68 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 0 TO 5 KG[90]()
Specification : FORGINGS OF 68 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 0 TO 5 KG
C
Nonestab
2) FORGINGS OF 12 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 6 TO 10 KG[90]()
Specification : FORGINGS OF 12 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 6 TO 10 KG
C
Nonestab
3) FORGINGS OF 7 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 11 TO 20 KG[90]()
Specification : FORGINGS OF 7 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 11 TO 20 KG
C
Nonestab
4) FORGINGS OF 9 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 21 TO 50 KG[90]()
Specification : FORGINGS OF 9 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 21 TO 50 KG
C
Nonestab
5) FORGINGS OF 8 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 51 TO 120 KG[90]()
Specification : FORGINGS OF 8 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 51 TO 120 KG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) St Forging Cylinder Gas Drg No SKM 306 star 5[01]()
Specification : St Forging Cylinder Gas Drg No SKM 306 star 5
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Forging Piston Extension for JVPC[01]()
Specification : Steel Forging Piston Extension for JVPC 5.56 mm as per drawing SK-5725
C
Nonestab
2) Steel Forging Block Gas for JVPC[01]()
Specification : Steel Forging Block Gas for JVPC, Drg. No. SK-JVPC-6003
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING BLOCK REAR FOR LMG 5 56[03]()
Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) FORGING RECEIVER GUIDE FRONT RIGHT for MAG[41]()
Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGINGS FOR BRACKET BACK SIGHT[01]()
Specification : STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),
C
Nonestab
2) STEEL FORGING FOR LEVER LOCKING FOR MAG[04]()
Specification : DRG. NO. SKM-303*5 MICRO-ETCH & NMIR TEST AS PER DRG.
C
Nonestab
3) St Forging Plate Bottom for MAG[01]()
Specification : DRG No. SKM-283*2
C
Nonestab
4) St Forging Cylinder Gas Drg No SKM 306 star 5[01]()
Specification : St Forging Cylinder Gas Drg No SKM 306 star 5
C
Nonestab
5) ST FORGING BUFFER BODY FOR MAG[01]()
Specification : DRG. NO. SKM-304*1
C
Nonestab
6) STEEL FORGING BREECH BLOCK SLIDE FOR MAG[04]()
Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82.
C
Nonestab
7) STEEL FORGING TO FOR BLOCK FRONT OF MAG[01]()
Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Al. Forging for Body Cover DRG no. SKM-174*[06]()
Specification : Al. Forging for Body Cover DRG No. SKM-174*
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING HAMMER FOR JVPC[01]()
Specification : STEEL FORGING HAMMER FOR JVPC 5.56 MM AS PER DRG. NO. SK JVPC 969.
C
Nonestab
2) Steel Forging Piston Extension for JVPC[01]()
Specification : Steel Forging Piston Extension for JVPC 5.56MM as per Drawing No. SK 5725
C
Nonestab
3) Steel Forging Block Gas for JVPC[01]()
Specification : STEEL FORGING BLOCK GAS FOR JVPC 5.56MM AS PER DRG.NO. SK-JVPC-6003
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF FORGING FOR BODY TO DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.[70]()
Specification : AS PER DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.
1) CROWN GEAR OF THIRD PLANETARY GEAR SET TO 3901040043
Description : CROWN GEAR OF THIRD PLANETARY GEAR SET TO 3901040043()
Specification : 172.40.310/F
C
Estab
2) GEAR ANNULUS TO 3906401085
Description : GEAR ANNULUS TO 3906401085()
Specification : 172.40.247/F
C
Estab
3) WHEEL GEAR L H TO 3906401105
Description : WHEEL GEAR L H TO 3906401105()
Specification : 175.40.005/F
C
Estab
4) FLANGE REAR RH TO 3906401115
Description : FLANGE REAR RH TO 3906401115()
Specification : 175.40.019-1A/F
C
Estab
5) BRAKE HOUSING RH LH TO 3906401118
Description : BRAKE HOUSING RH LH TO 3906401118()
Specification : 175.40.021/022/F
C
Estab
6) GEAR TO 3906401127
Description : GEAR TO 3906401127()
Specification : 175.40.025/F
C
Estab
7) PLANET PINION TO 3906404013
Description : PLANET PINION TO 3906404013()
Specification : 172.43.006/F
C
Estab
8) RING LABYRINTH TO 3906411024
Description : RING LABYRINTH TO 3906411024()
Specification : 172.51.017/F
C
Estab
9) ROAD WHEEL ARM 3 4 5 SUSPENSIONS TO 3906411028
Description : ROAD WHEEL ARM 3 4 5 SUSPENSIONS TO 3906411028()
Specification : 172.51.022/F
C
Estab
10) LEVER TO 3906861041
Description : LEVER TO 3906861041()
Specification : 172.52.124/F
C
Estab
11) LEVER AXLE TO 3906861042
Description : LEVER AXLE TO 3906861042()
Specification : 172.52.125/F
C
Estab
12) HOUSING TO 3906861047
Description : HOUSING TO 3906861047()
Specification : 172.52.133/F
C
Estab
13) SLEEVE TO 3906888125
Description : SLEEVE TO 3906888125()
Specification : 172.18.216-1B/F
C
Estab
14) GEAR CROWN 3RD PLANETORY GEAR SET OPN 10 20 SEMI MACHINED FORGING TO 3956401085
Description : GEAR CROWN 3RD PLANETORY GEAR SET OPN 10 20 SEMI MACHINED FORGING TO 3956401085()
Specification : 172.40.247/SMF
C
Estab
15) L H FRONT FLANGE TO 3991040106
Description : L H FRONT FLANGE TO 3991040106()
Specification : 172.40.365/F/PL
C
Estab
16) RING TO 3996109020
Description : RING TO 3996109020()
Specification : 172.11.073/F/PL
C
Estab
17) FLANGE FRONT L H TO 3996401045
Description : FLANGE FRONT L H TO 3996401045()
Specification : 172.40.201-1A/F/PL
C
Estab
18) BOOSTER TO 3996401071
Description : BOOSTER TO 3996401071()
Specification : 172.40.232/F/PL
C
Estab
19) FLANGE FRONT R H TO 3996401101
Description : FLANGE FRONT R H TO 3996401101()
Specification : 175.40.001-A/F/PL
C
Estab
20) FLANGE REAR RH TO 3996401115
Description : FLANGE REAR RH TO 3996401115()
Specification : 175.40.019-1A/F/PL
C
Estab
21) BOOSTER TO 3996401120
Description : BOOSTER TO 3996401120()
Specification : 175.40.023/F/PL
C
Estab
22) PLANET IV TRAIN TO 3996401166
Description : PLANET IV TRAIN TO 3996401166()
Specification : 175.40.140/F/PL
C
Estab
23) GEAR BEVEL DRIVEN TO 3996402078
Description : GEAR BEVEL DRIVEN TO 3996402078()
Specification : 172.41.082/F/PL
C
Estab
24) BUSHING TO 3996411099
Description : BUSHING TO 3996411099()
Specification : 172.51.026/F/PL
C
Estab
25) BUSHING INNER TO 3996412022
Description : BUSHING INNER TO 3996412022()
Specification : 172.2M.52.004/F/PL
C
Estab
26) SUPPORT OF LH REDUCTION GEAR UNIT TO 3996801445
Description : SUPPORT OF LH REDUCTION GEAR UNIT TO 3996801445()
Specification : 175.01.378-B/F/PL
C
Estab
27) COVER LABYRINTH TO 6206410015
Description : COVER LABYRINTH TO 6206410015()
Specification : 175.50.008
C
Estab
28) STOP ROAD WHEEL ARM 1ST SUSPENSIONS TO 6206801658
Description : STOP ROAD WHEEL ARM 1ST SUSPENSIONS TO 6206801658()
Specification : 172.01.689
C
Estab
29) STOP ROAD WHEEL ARM TO 6206801659
Description : STOP ROAD WHEEL ARM TO 6206801659()
Specification : 172.01.690
C
Estab
Category : p
Grade : 2
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF ROUGH MACHINED CARRIER FORGING AS PER DRG NO 765 15 156 10 AS PER SCOPE OF WORK NO SCOPE OF WORK MA 12 1208 22 DATED 08 06 2017[80]()
Specification : MANUFACTURING AND SUPPLY OF ROUGH MACHINED CARRIER FORGING AS PER DRG NO 765 15 156 10 AS PER SCOPE OF WORK NO SCOPE OF WORK MA 12 1208 22 DATED 08 06 2017
2) ESR GRADE STEEL IN THE SIZE RANGE OF 60MM TO 360MM[01]()
Specification : AS PER SPECIFICATION
R
Estab
3) RCS BILLETS UP TO 140MM A/F[01]()
Specification : AS PER SPECIFICATION
R
Estab
4) PARTED STEEL BILLET TO OFAJ DRG NO F 467D and OFAJ DRG SPECN F 345 G FOR 125 MM HE SHELL[00]()
Specification : OFAJ DRG/SPECN F-345 G
R
Estab
Category : DDP
Grade : I
Size :
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) PRE FORM BLANK TO OFAJ DRG NO FS 2700 B MADE OF FORGED STEEL SAE 4130 CONVERTED TO ESR GRADE
Description : PRE FORM BLANK TO OFAJ DRG NO FS 2700 B MADE OF FORGED STEEL SAE 4130 CONVERTED TO ESR GRADE()
Specification : PRE FORM BLANK TO OFAJ DRG NO. FS-2700 B MADE OF FORGED STEEL SAE-4130 CONVERTED TO ESR GRADE
Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED
R
Nonestab
Category : p
Grade : 3
Size :
M
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 32MM DIA GOST V 10230 75 LF 0184108032
Description : STEEL ROD 32MM DIA GOST V 10230 75 LF 0184108032()
Specification : STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Metal and Steel Factory
Name
Specification
Use
Status
1) STEEL BLOOMS SIZE 300MM X 300 MM RCS OF DIFFERENT LENGTH AND WEIGHT[4415059245]()
Specification : STEEL BLOOMS SIZE 300 MM X 300 MM (RCS) AS PER DETAILS SCOPE OF SUPPLY AND RAILWAY SPECIFICATION NO. IRS-R-16/95 WITH CORRIGENDUM 1 TO 3.
R
Nonestab
Category :
Grade : Grade III
Size :
L
1) Heavy Vehicle Factory
[ENR Registration]
Name
Specification
Use
Status
1) 45XH2MOA W ESR GOST 4543 71 TY 14 1 1725 76 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412702056
Description : 45XH2MOA W ESR GOST 4543 71 TY 14 1 1725 76 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412702056()
Specification : 45XH2MOA-W(DIA.56)
R
Estab
Category : p
Grade : 2
Size :
M
1) Ordnance Factory Kanpur
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 115MM DIA
Description : STEEL ROD 115MM DIA()
Specification : FORGED AND ANNEALED STEEL ROD 115 MM (+/-2MM) DIA IN MULTIPLE LENGTH OF 605 MM TO SPECN. SAEH-13 IN SKIN TURNED & ULTRASONICALLY SOUND CONDITION AS PER IS: 8791-1978 CLAUSE 9.1(A) WITH +10MM PARTING ALLOWANCE FOR EACH PIECE.
R
Estab
2) STEEL FLAT 150SX140X1300MM SAE H 13
Description : STEEL FLAT 150SX140X1300MM SAE H 13()
Specification : STEEL FLAT TO SIZE: 150 (+/-5)MMX140(+/-5)MMX1300(+10)MM TO SPECN. IS: 3748-1978 GRADE T-35 CR5 MOV-1 (EQUIVALENT SAEH-13 IN FORGED ANNEALED & ULTRASONICALLY SOUND CONDITION AS PER CLAUSE 9.1 (A) OF IS: 8791-1978.
2) 6432300001 STD CASATTE CONT FOR STD ERA PANEL[64]()
Specification : IS:277-92) HEMRL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6584113922 WASHER C TO DRG PT NO ISV 1591[65]()
Specification : JSS 8010-63-1991
C
Nonestab
2) 6584113923 WASHER D TO DRG PT NO ISV 1592[65]()
Specification : JSS 8010-63-1991
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576773398 AMN CONTAINER BOX C 53A ISV 574 A[65]()
Specification : AMMUNITION CONTAINER BOX C 53-A (STEEL) FOR PACKING OF 130MMAMMUNITION TO DRG. PART NUMBER ISV 574-A DC NUMBER 37047-A DATED 20/03/2006.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6575000010 CYLINDER NO 239 FOR FZ 24A RKT 68 MM[65]()
Specification : CYLINDER NO 239 TO DGAQA DRG NO ARM 1515 C1 FOR PACKAGES OF FUZE 24 A 68 MM ROCKET
Specification : BOX STEEL NO.412 S/4 (GENERAL ARRANGEMENT) DRG.NO.ARDE 1248 AL NO. 49/96 DATE 08.11.96 WITH 5 FITMENTS OF DRG NO. ARDE 1249 DETAIL NO. 1,2,3,4 AND 5. (REQUIRED FOR PACKING OF 68 MM ROCKET HE/PRACTICE)
C
Estab
2) 6571747622 BOX TIN FOR STORING DET[65]()
Specification : BOX TIN FOR STORING DETONATORS TO DRG.NO.FQ/II/200
C
Nonestab
3) 6570016000 BOX H 50 STEEL[65]()
Specification : BOX AMMUNITION S.A. H 50 MARK 1/LA, STEEL TO DRG.NO.SV 140-A DC (I)-34273-A DATED 21.11.1987
C
Estab
4) 6571341952 CARRIER 13 A (OG), ISV 488-A[65]()
Specification : SPECN.NO. IA 1169
C
Nonestab
5) 6571442459 CARRIER 13A (BG) TO ISV 488A[65]()
Specification : SPECN. NO. IA 1169
C
Estab
6) 6570960402 BOX C 51 A AMMN. CONTAINER[65]()
Specification : AMMUNITION CONTAINER BOX C 51-A (STEEL) FOR PACKING OF 125 MM HE TO DRG.PT.NO.ISV-572-A,DC NO.37051-A, DT.05.05.2006.
C
Nonestab
7) 6570610080 BOX P60 MK 2 L[65]()
Specification : AMN. CONT. BOX P 60 MARK 2/L TO DRG. PART NO. SV 24 A DC NO. 35530- A.
C
Nonestab
8) 6575500000 CYLINDER 239MK5 STEEL TEAR OFF BAND[65]()
Specification : CYLINDER 239 MK 5/L TIN PLATE WITH TEAR OFF BANDS DESIGNER REFERENCE NUMBER D-7(L) 1509/A/326 DC 34595-A PT.NO.SV-55A REQUIRED FOR PACKING OF AMMUNITION ROCKET 68 MM HE.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6571551172 BOX B-7 A DRG. ISV -505A DC(I)34047-[65]()
3) 6570963318 BOX C 52 A STEEL DRG NO ISV 573A[65]()
Specification : AMMUNITION CONTAINER BOX C 52-A (STEEL) FOR PACKING OF 125 MM HEAT TO DRG.PT.NO.ISV-573-A DC NO.37051-A DT 05-05-2006 .
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6572900000 CARRIER 6A L STEEL DRG NO ISV 354A[65]()
Specification : CARRIER 6A/L STEEL COMPLETE WITH ALL FITMENTS DRAWING NO.ISV354-A DC-37214-A,SPECN. NO. IA-1169(N) DC 35576-A, SHOULD BEPAINTED WITH READY MXD PAINT AIR DRYING MATT FINISH SPRAYINGFOR GENERAL PURPOSE "OLIVE GREEN R.M.A.R. MATT FINISH GP T
DRG.NO. ARM 1253 D-1,REV.NO-6 DT.27.06.96,DRG LIST NO.ARM 1253 SHEET-1 REVISION NO.7 DT.01.08.96 SHEET-2 REV-5 DT.31.07.96
E
Not Estab.
2) AMMN.CONTAINER BOX C-44A(STEEL)()
DRG.NO.CQA(A)AMN/2644 PART NO.ISV-530A,DC:37249-A,DT.08.3.10 SPECN:IA-1169(n),DC NO:35576-A,PAINTED"OLIVE GREEN"ISC NO: 220 OF IS:5-2007(6TH REVISION) RE AFFIRMED-2012.
E
Not Estab.
3) AMMUNITION CONTAINER BOX C 53-A (STEEL) ()
DRG.PART NO:ISV 574-A,DC NO.37047-A, DT.20.03.2006 FOR PACKING OF 130MM AMMN.
E
Not Estab.
4) 51MM MORTAR BOMB BODY(EMPTY)()
PT. NO.ITV 17 SA (02 SHEETS), SHEET NO.01 DC 37111-A DT.21.05.07 & SHEET-2, DC 37193-A DT.13.11.08.
E
Not Estab.
5) DIAPHRAGM ()
PART NO.ISV 95 SA FOR PACKING OF PRIMER 1A/L. [REFER OFBL DRG.NO.BL/EQP/U-1/241]
C
Not Estab.
6) NOTCHED COIL ()
ARDE 1933 PART ITV- 169 DETAIL NO.3,DC.36529-A,DT.06.03.2008.
C
Not Estab.
Category : DDP,DP
Grade : I,II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) GRENADE BODY BLANKS TO GSF DRG NO M 11220[62]()
Specification : GRENADE BODY BLANKS TO GSF DRG. NO M-11220
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6570160000 BOX G 70 MK-1 (STEEL) OLIVE GREEN.[65]()
Specification : RETAINER TO DRG NO. 9102 00 01 00 01 003 00TA FOR 30 MM GREN-ADE RUDRA AGS-17.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Name Plate 6 AL()
As per Drg. & Specification
C
Not Established
2) Vertical Channel 6 AL()
As per Drg. & Specification
C
Not Established
Category : DP
Grade : I,II
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) CATCH LOCK ASSY DRG NO IA 053 4 CO item code 9911358061
Description : CATCH LOCK ASSY DRG NO IA 053 4 CO item code 9911358061()
Specification : CATCH LOCK ASSY AS PER DRG NO.IA-1053 SHT 1,SHT 2,SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH,2-LINK,3-HOOK PLATE,4-HASP
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Cylinder 12 A Steel for Ammunition , Container Assembly 117 A[14]()
Specification : CYLINDER 12A STEEL FOR AMMUNITION, CONTAINER ASSEMBLY 117A. AS PER DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428.
R
Estab
2) Metallic Container For Charge 9[25]()
Specification : Drg No.4085561 DC 35637 CQA AMMN OF Dtd17.02.93 LEAK TEST AS PER SPECN. IA-1169(N), DC-35707-A DT.05.5.94
R
Estab
3) CYLINDER 443 MK 1/L[65]()
Specification : GALVANIZED STEEL SHEET TYPE DEEP DRAWING DESIGNATION B GPO TO SPECN. IS:277-2003. AS PER DRG. NO. OFBA/CX/51 DT.24.02.1989 & 05.01.2007 (FOR ITEM NO. 5 & 6) AMENDED ON DT.10.10.2008. TRACED FROM DRG.NO. DD (L) 16472 B AMENDED VIDE DC. NO.
R
Estab
4) METALLIC CONTAINER -M4A2 (SER)[25]()
Specification : METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.
R
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6570950402 CONTAINER 3RK 33 METAL FOR 125MM[65]()
Specification : CONTAINER CONSISTING OF THE FOLLOWING ITEMS
1.BODY DET. NO. 010
2. COVER DET.NO. 020
3.BOLT DET. NO. 030
4. FORK DET.NO 005
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)
Description : BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)()
Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX C-235 (STEEL) WITH 10 MM HOLES (22 NOS.) (6570190100)[65]()
Specification : BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERALP
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) AMMN.CONTAINER BOX C-43A(STEEL) [14]()
Specification : PART NO.ISV-529A DC NO:37249-A,DT.08.03.10,SPECN:IA 1169(N),DC NO:35576-A, AIDE MEMOIRE- P/11.NOTE-PAINTING AND PROTECTIVE TREATMENT AS PER DRG.PAINTED "OLIVE GREEN"TO ISC NO.220 OF IS-5-2007(SIXTH REVISION) (AMDT.NO.1)(RE-AFFIRMED 2000
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) CYLINDER FOR METAL CASE[01]()
Specification : CYLINDER FOR METAL CASE AS PER DRAWING NO. OFBH/SK/1460. THE ACCEPTANCE CRITERIA MUST BE COMPLIED AS PER ATTACHED ANNEXURE 'A' . THE SUPPLIER MUST PROVIDE/SUBMIT THE TEST CERTIICATE OBTAINED FROM NABL/GOVT. ACCREDATED LAB WITH SUPPLY
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
[ENR Registration]
Name
Specification
Use
Status
1) M S PLATE SZ 3 MM PHOSPATED
Description : M S PLATE SZ 3 MM PHOSPATED()
Specification : MS PLATE OF SIZE 126 + 1.0-0.0 X 126 + 1.0-0.0X 3MM THICK (PHOSPATED) TO SPEC IS : 2062-1994 OF ANY GRADE, CORNER RADIUS 3R. ALL SHARP CORNERS TO BE REMOVED. TESTING TO BE DONE FOR TENSILE & ELONGATION. HEMRL DRG NO 1517- DETL NO. 3
R
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) PIECE PACKING BOTTOM "A" PT NO ISV-242 SA
Description : PIECE PACKING BOTTOM "A" PT NO ISV-242 SA()
Specification : DRG NO CQA(A)/ AMN/2543.Det-4.DC NO-35099-A DT.31-05-91
C
Estab
2) PIECE PACKING END TO PT. NO. ISV-241SA
Description : PIECE PACKING END TO PT. NO. ISV-241SA()
Specification : AMMUNITION CONTAINER BOX B-9A STEEL TO DESIGNER'S REF: ARDE-2174, SHEET NO.3 PART NO.ISV 553A, DC 35907-A, SPECN IA 1169(n) DC 35576-A BOXES TO BE PAINTED AS PER DRG. WITH PAINT OF SHADE OLIVE GREEN (ISC 220) OF IS:5-2007 WITH 6TH REVI
C
Estab
5) PARTITION 410 X 45 X 3 MM TH (5 PLY) ITEM NO 9
Description : PARTITION 410 X 45 X 3 MM TH (5 PLY) ITEM NO 9()
Specification : PT NO ISV-465 GA DESIGNER REF CQA/AMN/2543 SHEET-1 DC NO.36814-A DT.15-02-02
C
Estab
Category : p
Grade : 3
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) BOX M 104 MK1 PAINTED OLIVE GREEN[65]()
Specification : IA 1169
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CYLINDER FOR PACKING OF FUZE 3KM-EM[65]()
Specification : DRG. NO.NAD 4704/1
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) BOX C 28 A STEEL[65]()
Specification : DESIGNERS REF CIA/AMN/1180 PART NO.ISV 357 A
5) GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.[70]()
Specification : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.
7) GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.- 1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550 DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET)[70]()
Specification : GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.- 1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550 DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET)
9) GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE[70]()
Specification : GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE COMPONENT TO BE OF MATERIAL.MOULD ING POWDER'MOULDING PLASTICS (PHENOLIC)TO SPECN JSS:1097 GR- Z/60/6 OR NYLON 66GP W/OGLASS FIBRE TO SPECN DEF/STAN 9
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Chest Rifle for 5.56mm INSAS()
As per Drawing
C
Not Estab.
Category : P
Grade : III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) ALUMINIUM MAGAZINE ASSEMBLY AS PER DRG NO K 7100STR FOR 7POINT62MM TRICHY ASSAULT RIFLE[70]()
Specification : ALUMINIUM MAGAZINE ASSEMBLY AS PER DRG NO K 7100STR FOR 7POINT62MM TRICHY ASSAULT RIFLE
C
Nonestab
Category : P
Grade : III
Size :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Ammunition Box to Drawing Number 45P 5000 required for AGS 30[70]()
Specification : As per drawing and specification.
C
Nonestab
2) BACK PLATE (NYLON) TO DRG. No. 33P 3015[70]()
Specification : AS PER DRG OF BACK PLATE (NYLON) TO DRG. No. 33P 3015
C
Nonestab
3) BOX FOR ACCESSORIES WITH CAP AS PER DRG NO. K 9021WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 9021WITH FIRMS MATERIAL
E
Nonestab
4) BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY ( L.F. No.7011655072)[70]()
Specification : As per Drawing
E
Nonestab
5) BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028[70]()
Specification : AS PER D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028
E
Nonestab
6) BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL[70]()
Specification : BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
C
Nonestab
7) CHEST RIFLE 7.62MM 1B (TO HOLD 10 RIFLES WITH 20 MAGAZINES) DS CAT NO. 1005-001737. SHEET NO.1 DC(I)22765-SA DT.14-12-94 SHEET NO.2 DC(I)23515-SA DT. 5-10-96.SHEET NO.3 DC(I)22315SA DT. 4-11-93. FOR DC.NO.LATEST ISSUE SHOULD BE FOLLOWED[70]()
Specification : CHEST RIFLE 7.62MM 1B (TO HOLD 10 RIFLES WITH 20 MAGAZINES) DS CAT NO. 1005-001737. SHEET NO.1 DC(I)22765-SA DT.14-12-94 SHEET NO.2 DC(I)23515-SA DT. 5-10-96.SHEET NO.3 DC(I)22315SA DT. 4-11-93. FOR DC.NO.LATEST ISSUE SHOULD BE FOLLOWED
E
Nonestab
8) FIXED BUTT ASSY AS PER DRG No K3000 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 3000 WITH FIRM'S MATERIAL
C
Nonestab
9) GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.TAR-RB-K-1026
E
Nonestab
10) GRIP PISTOL ASSEMBLY (PLASTIC) (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,[70]()
Specification : AS PER DRG (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,
E
Nonestab
11) GRIP PISTOL FRONT TO DRG NO 33P 1302[70]()
Specification : AS PER DRAWING
C
Nonestab
12) MAGAZINE ASSY AS PER DRG No. K 7000 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 7000 WITH FIRM'S MATERIAL
E
Nonestab
13) PACKING BOX FOR ARTICLE 2A42 ASSYTO DRG NO 2R28.000.C6 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED. (30MM CANNON)[70]()
Specification : AS PER DRG TO PACKING BOX FOR ARTICLE 2A42 ASSYTO DRG NO 2R28.000.C6 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED.
(30MM CANNON)
C
Nonestab
14) PACKING BOX TO HOLD 3 WEAPONS AS PER DRAWING No:32Y 0001 005 E3 REQUIRED FOR UBGL[70]()
Specification : AS PER DRAWING No:32Y 0001 005 E3 REQUIRED FOR UBGL
E
Nonestab
15) PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL
E
Nonestab
16) STOCK BUTT ASSY[70]()
Specification : AS PER DRAWING
C
Nonestab
17) STOCK BUTT SUB ASSY TO DRG. No. 33P 4010 FOR 38MM MSL[70]()
Specification : AS PER DRG OF STOCK BUTT SUB ASSY TO DRG. No. 33P 4010 FOR 38MM MSL
C
Nonestab
18) STOCK BUTT TO DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle
C
Nonestab
19) SUPPLY OF PACKING BOX AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL
E
Nonestab
20) SUPPLY OF PACKING BOX FOR 10 NOS AS PER DRG NO K 9024STR WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF PACKING BOX FOR 10 NOS AS PER DRG NO K 9024STR WITH FIRMS MATERIAL
C
Nonestab
21) TRANSIT CASE TO DRG NO. TEND 1937* FOR 40mm MGL[70]()
Specification : AS PER DRG OF " TRANSIT CASE TO DRG NO. TEND 1937* FOR 40mm MGL
"
C
Nonestab
22) UPPER HAND GUARD ASSY AS PER DRG No K 2050 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2050 WITH FIRMS MATERIAL
C
Nonestab
23) GRIP REAR TO DRG NO 33P 3023[70]()
Specification : AS PER DRAWING
C
Nonestab
24) GRIP REAR TO DRG NO.30P 3023[70]()
Specification : AS PER DRG OF GRIP REAR TO DRG NO.30P 3023
C
Nonestab
25) GUARD HAND TO DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL[70]()
Specification : AS PER DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL
E
Nonestab
26) LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL
C
Nonestab
Category : P
Grade : III
Size :
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) CYLINDER 443 MK1/L (TIN PLATE)()
OFBA/CX/51 DTD24.02.89
R
2) Box C-26 A wood()
Drg .No.CIA/AMMN/1773 DC35922 A dtd 23.02.95 & Spc. IA-948(a, f) DC-36081 A
R
3) Unit load for 155 charge M4A2()
Drg. No.13646-4-0 DC No.35707-A & CFA Drg. No. 13-S/003
R
4) Crate 5 A/Lwire bound for packing ammunition 79/A()
Drg .No. OFBA/CX/55dtd16.08.94amended on 15.02.02
R
5) Reel 1A/L for packing ammunition 79/A()
Drg .No. OFBA/CX/54dtd08.04.93
R
6) Cylinder 12 A Steel for Ammunition Container Assembly 117 A()
Drag. NO. CIA/ AMMN/ 1833 Part No. ISV 453 A
R
Not Estab.
7) Box C-27 A Tin Plate for Package Ammnution 92 A()
Drg. No. OFBA / NCP / 209 Dtd. 25.11.68 Amended on Dtd. 15.10.08 & Specn IA - 1163 ( h )
R
Estab.
8) Metallic Container For M4A2()
Drg. No. CQA(AMMN)13979-0-0
R
Estab.
9) Metallic Container For Charge 8&9()
Drg. No. CQA(AMMN)4085561 and Specn. No. IA - 1169 ( n)
Specification : 84MM TWIN CONTAINER/ROUND PART NO.1202502.
R
Nonestab
6) TWIN CONTAINER 520 9 PART 1202503 LF 9911358476[99]()
Specification : TWIN CONTAINER 520:82/ROUND PART NO.1202503 TO OEM DRG.NO. 04110302/TRD DRG.NO.3.2.2568.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Itarsi
Name
Specification
Use
Status
1) PACKING BOX FOR SPC CHARGE FOR RZ-61()
AS PER DRAWING NO.HEMRL/SRP/PHR/05.5 FOUR SHEETS
E
Estab
2) WOODEN DUNNAGE()
AS PER DRG.NO.OFI/94/STORE/03
E
Estab
Category : DP
Grade : II
Size :
S
1) Ordnance Factory Itarsi
Name
Specification
Use
Status
1) PACKING BOX FOR AKASH BOOSTER()
AS PER TSQD NO.DRDL/TSQD/AK/022 REV2 AND DRAWING NO.HEMRL/SRP/AK/BST/CP/04
E
Estab
Category : DP
Grade : II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91 D S CAT No 1005 007723 D C No 22706 SA Dt 5 point 11point 94 IMPROVED VERSION FOR RIFLE 7point 62mm 1A1 TO D S C T No 1005 007504 1005 007505 1005 007506 1005 007507 1005 001593 1005 1718[70]()
Specification : AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.TAR-RB-K-1026
E
Nonestab
2) LOWER HAND GUARD ASSY AS PER DRG No K 2040STAR4 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG No K 2040STAR4 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
E
Nonestab
3) UPPER HAND GUARD ASSY AS PER DRG No K 2050 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2050 WITH FIRMS MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL
E
Nonestab
2) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL[70]()
Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CHEST RIFLE 7.62MM 1B (TO HOLD 10 RIFLES WITH 20 MAGAZINES)()
AS PER DRAWING
C
Not Established
2) CHEST RIFLE 7.62MM 1B (TO HOLD 10 RIFLES WITH 20 MAGAZINES)()
AS PER DRAWING
C
Not Established
Category : P
Grade : III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) AMMUNITION CONTAINER BOX C 40 A WOODEN()
ISV 513 A
C
Estab
2) AMMUNITION CONTAINER BOX C 47 A WOOD AND PLYWOOD()
ISV 554 A
C
Estab
3) AMMUNITION CONTAINER BOX C 47 B WOOD AND PLYWOOD()
ISV 555 A
C
Estab
4) AMMUNITION CONTAINER BOX M 32-A WOOD()
ISV 548 A
C
Estab
5) MOP 12 SHELL 155 MM BT ON PALLET()
DESIG REF 155-1000(A)
C
Estab
6) MOP 12 SHELL 155 MM BB ON PALLET()
DESIG REF 155-2000(A)
C
Estab
7) AMMUNITION CONTAINER C 41 A (WOODEN)()
ISV 519 A
C
Estab
8) AMMUNITION CONTAINER BOX C 51 A (STEEL) FOR PACKING OF 125 MM HE)()
ISV 572 A
C
Estab
9) AMMUNITION CONTAINER BOX C 53 A FOR PACKING OF 130 MM AMMUNITION()
ISV 574 A
C
Estab
10) AMMUNITION CONTAINER BOX C 43 A (STEEL)()
ISV 529 A
C
Estab
11) AMMUNITION CONTAINER BOX M 35 (STEEL)()
ISV 571 A
C
Estab
12) CARRIER AMMUNITION 13 A (STEEL)()
ISV 488
C
Estab
13) 6584113903 PACKING BOX WOODEN()
DRG. NO.. ARDE 9759
C
Established
14) 6574610103 AMN. CONTAINER BOX M-41()
DRG. NO. ISV- 587A
C
Established
15) 6570950402 - CONTAINER RK -33()
DRG. NO. 4-24929 INDEX NO.3
C
Established
Category : DP
Grade : I
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) AMMUNITION CONTAINER BOX C 40 A WOODEN[65]()
Specification : ISV 513 A
C
Nonestab
2) AMMUNITION CONTAINER BOX C 47 A WOOD AND PLYWOOD[65]()
Specification : ISV 554 A
C
Nonestab
3) AMMUNITION CONTAINER BOX C 47 B WOOD AND PLYWOOD[65]()
Specification : ISV 555 A
C
Nonestab
4) AMMUNITION CONTAINER BOX M 32-A WOOD[65]()
Specification : ISV 548 A
C
Nonestab
5) MOP 12 SHELL 155 MM BT ON PALLET[65]()
Specification : DESIG REF 155-1000(A)
C
Nonestab
6) MOP 12 SHELL 155 MM BB ON PALLET[65]()
Specification : DESIG REF 155-2000(A)
C
Nonestab
7) AMMUNITION CONTAINER C 41 A (WOODEN)[65]()
Specification : ISV 519 A
C
Nonestab
8) AMMUNITION CONTAINER BOX C 51 A (STEEL) FOR PACKING OF 125 MM HE)[65]()
Specification : ISV 572 A
C
Nonestab
9) AMMUNITION CONTAINER BOX C 53 A FOR PACKING OF 130 MM AMMUNITION[65]()
Specification : ISV 574 A
C
Nonestab
10) AMMUNITION CONTAINER BOX C 43 A (STEEL)[65]()
Specification : ISV 529 A
C
Nonestab
11) AMMUNITION CONTAINER BOX M 35 (STEEL)[65]()
Specification : ISV 571 A
C
Nonestab
12) CARRIER AMMUNITION 13 A (STEEL)[65]()
Specification : ISV 488
C
Nonestab
13) 6570950402 - CONTAINER RK -33[65]()
Specification : DRG. NO. 4-24929 INDEX NO.3
C
Nonestab
14) 6584113903 PACKING BOX WOODEN[65]()
Specification : DRG. NO.. ARDE 9759
C
Nonestab
15) 6574610103 AMN. CONTAINER BOX M-41[65]()
Specification : DRG. NO. ISV- 587A
C
Nonestab
16) 6570963298 BOX S 9 WOOD FOR 140MM HE ROCKET[65]()
Specification : BOX S-9 WOOD TO HOLD-2, 140MM HE FRAGMENTATION ROTARY ROCKET PLGD DRAWING NUMBER NAI(V)-5502(P).
C
Nonestab
17) 6576773601 PACKING BOX FOR HDC-2[65]()
Specification : PACKING BOX FOR HDC-2 TO DRG NO. HEMRL/MISC/SK-1471 SHT.2 OF 2 AND DET.1 TO 12 EXCLUDING SADDLE
C
Nonestab
18) 6570610080 BOX P60 MK 2 L[65]()
Specification : AMN. CONT. BOX P 60 MARK 2/L TO DRG. PART NO. SV 24 A DC NO. 35530- A.
C
Nonestab
19) 6571856109 BOX M-32A(WOOD)PT NO 548A(MINEAP1B)[65]()
Specification : BOX STEEL NO.412 S/4 (GENERAL ARRANGEMENT) DRG.NO.ARDE 1248 AL NO. 49/96 DATE 08.11.96 WITH 5 FITMENTS OF DRG NO. ARDE 1249 DETAIL NO. 1,2,3,4 AND 5. (REQUIRED FOR PACKING OF 68 MM ROCKET HE/PRACTICE)
C
Nonestab
21) 6576773800 PACKING BOX FOR MODULAR CHARGE 350G[65]()
Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
22) 6576774200 PACKING BOX FOR SHAPED CHARGE 145MM[65]()
Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
23) 6576774400 PACKING BOX FOR CUTTING CHARGE 100M[65]()
Specification : PACKING BOX (SUB ASSLY) FOR CUTTING CHARGE 100 MM (EMPTY) TO DRG.NO.HE/CAST/080 DET.1 TO 17 & QAP NO.HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
24) 6191700063 PACKING BOX FOR ASSY OF PINAKA RKT[61]()
Specification : PACKING BOX FOR ASSEMBLY OF PINAKA ROCKET ACCESSORIES TO ARDE DRAWING NO 8603 02 04 00 000 00 DA
C
Nonestab
25) 6570016000 BOX H 50 STEEL[65]()
Specification : BOX AMMUNITION S.A. H 50 MARK 1/LA, STEEL TO DRG.NO.SV 140-A DC (I)-34273-A DATED 21.11.1987
C
Nonestab
26) 6571747622 BOX TIN FOR STORING DET[65]()
Specification : BOX TIN FOR STORING DETONATORS TO DRG.NO.FQ/II/200
Specification : AMMUNITION CONTAINER BOX M-104 MK-1 (STEEL) DES.REF.DD(L) 11325(SHEET-1& 2), DRG. PART NO.SV-22A DC 35994-A DT.12.8.95
C
Nonestab
28) 6570160000 BOX G 70 MK-1 (STEEL) OLIVE GREEN.[65]()
Specification : SPECN. NO. IA 1169
C
Nonestab
29) 6576773600 PACKING BOX FOR HDC-1[65]()
Specification : PACKING BOX FOR HDC-1 TO DRG.NO.HEMRL/MISC/SK-1470 SHT.2 OF2 & DET 1 TO 12 (EXCLUDING SADDLE TO DRG.NO. HEMRL SK 1169 DET 12)
C
Nonestab
30) 6576774300 PACKING BOX FOR RIGID CUTTING CHARGE 85 MM[65]()
Specification : PACKING BOX FOR RIGID CUTTING CHARGE 85 EMPTY TO DRG NO HE/CAST/079 DET.1 TO17 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
31) 6431826719 CUP & BASE DETONATOR HOLDER 560 MG[64]()
Specification : CUP DETONATOR HOLDER & BASE DETONATOR HOLDER FOR DET. 560 MG FOR MINE APERS M-14.
C
Nonestab
Category : DP
Grade : I
Size :
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) HANDLE & HANDLE CLIP ASSLY FOR BOX C-53A()
AS PER O.F.BHUSAWAL DRAWING & SPECN.
C
ESTAB.
2) BOTTOM SUPPORT PARTITION FOR BOX C-53A()
AS PER O.F.BHUSAWAL DRAWING & SPECN.
C
ESTAB.
3) CENTRE PARTITION FOR BOX C-53A()
AS PER O.F.BHUSAWAL DRAWING & SPECN.
C
ESTAB.
4) BRACKET END FOR SHELL FOR BOX C-53A()
AS PER O.F.BHUSAWAL DRAWING & SPECN.
C
ESTAB.
5) BOTTOM CENTRE PARTITION FOR CARRIER 6A()
AS PER O.F.BHUSAWAL DRAWING & SPECN.
C
ESTAB.
Category : DP
Grade : II
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Vertical Channel 6AL()
As per Drg. & Specification
C
Not Established
2) Top Frame 13A()
As per Drg. & Specification
C
Not Established
3) Bottom Frame 13A()
As per Drg. & Specification
C
Not Established
Category : DP
Grade : III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CARRIER AMMUNITION 16A FOR MORTAR BOMB 81 MM ILLG. 2A()
IA 1169(n) [DRG.NO. ARDE 2224 part no. ISV 550A]
C
Estab
2) PALLET FOR SHELL 155 MM ( 12 PACKS)()
DRG.NO. 155-1210
C
Estab
3) BOX STEEL C-239 FOR BOMB 3 KG()
DRG NO.ARDE 2148 DET NO.6,AL.NO.20/2008 DT.21/7/2008
C
Non Established
Category : P
Grade : II
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX M-104 MK-1 STEEL DD(L)11325[65]()
Specification : BOX M-104 MK-1 (STEEL) TO DESIG.REF. DD(L) 11325, SHT-1 DRG PART NO SV-22-A DC NO.35994-A DT.12-8-95.
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX M-369 WOODEN IA-880 ISV-165A[65]()
Specification : BOX M-369 MK1/L/(WOOD) TO DRG. PT. NO. ISV-165-A DC-34541-A DT 28-1-89 SPECN:-IA 948 (ak) DC-36868-A AIDEMEMOIRE-W/4.
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SET OF CARRIER 4A/L & CARRIER 5A/L[99]()
Specification : SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIE
Specification : AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LISTOF COMPONENTS ENCLOSED.
Specification : CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 13A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED W
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARRIER 11A ISV 468A FOR HE AND ILLU 6573810100[65]()
Specification : CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIR
DRG. NO. CQA(A)AMN/2644 PART NO.ISV-530A, DC:37249-A, DT.08.3.10 SPECN:IA-1169(n), DC NO:35576-A, PAINTED OLIVE GREEN ISC NO: 220 OF IS:5-2007(6TH REVISION) RE AFFIRMED-2012.
C
Not Estab.
2) MOP.12 SHELLS 155MM B/T ON PELLET WITHOUT GRUMET ()
DRG. NO:155-1000(M) (UNIT LOAD) CONSISTING OF PALLET TO DRG. NO.155-1210(M), FRAME ASSEMBLY TO DRG. NO.155-1230(M) DC NO.37126-A, DT.25.7.07.
C
Not Estab.
Category : P
Grade : III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX S 2 MK1 WOODEN FOR 76 2 NAV AMN LF 6580255000[65]()
Specification : BOX WOOD NO. S2 MK-1 (IN) TO HOLD 3 CARTRIDGES QF 76.2MM PRACTICE SHELL WITH PLUG REPRESENTING FUZE OR PLUGGED HE/PREFRAGMENTED SHELL TO DRAWING NO.ARDE-2077 DT.19NOV10 3SHTSSHT NO.1.R.NO.1 DT.09/12/87 AND SHT NO.3 R NO.2 DT.29/05/89
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) CENTER PARTITION()
As Per GCF Drg./ Requirements & Specifications
C
Not Established
2) BOTTOM SUPPORT PIECE()
As Per GCF Drg./ Requirements & Specifications
C
Not Established
3) BRACKET A-1()
As Per GCF Drg./ Requirements & Specifications
C
Not Established
4) BRACKET B-1()
As Per GCF Drg./ Requirements & Specifications
C
Not Established
5) BRACKET B-2()
As Per GCF Drg./ Requirements & Specifications
C
Not Established
Category : P
Grade : II
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) WOODEN CRATE[65]()
Specification : OFN/BMCS/M-92/WOODEN CRATE
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) AMMUNITION CONTAINER BOX F2A L F 9911356419
Description : AMMUNITION CONTAINER BOX F2A L F 9911356419()
Specification : AMMUNITION CONTAINER BOX F2A PLYWOOD TO DRG NO. TRD-1612 (AMMUNITION CONTAINER BOX F2A DRG PT NO.ISV-557-A DC-36222-ADT.22/01/97.)SPECN:-IA-948(ak) DC-36868-A THE SHADE OF PAINTTO BE USED IS PAINT READY MIX. QUICK DRYING MATT.FOR GENERALP
Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM I
Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM
Specification : AMMN CONT.BOX,M-167 MK-2/L (WOOD) TO DRG PT NO.ISV/96-A DC- 37245-A DT.19-01-10 SPECN:-IA- 948(ak)DC NO.36868-A AIDEMEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR BOX M-167 IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN
C
Estab
4) BOX C-235 (STEEL) WITH 10 MM HOLES (22 NOS.) (6570190100)[65]()
Specification : BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) THREE TYPES OF ELEMENT FILTERS[06]()
Specification : As per Specification / Drg
R
Nonestab
2) BOX FOR DRIVERS NIGHT VISION DEVICE ASSY[06]()
Specification : As per Specification / Drg
R
Nonestab
3) EXPANSION TANK ASSY[06]()
Specification : As per Specification / Drg
R
Nonestab
4) Box Assy[06]()
Specification : Drg No.175.91.090CB-A
R
Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)
Description : BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)()
Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) TIMBER M H C PLANKS 2255055300
Description : TIMBER M H C PLANKS 2255055300()
Specification : TIMBER MANGO/HOLLOCK/CHAPLAS PLANKS KILN SEASONED & PRESSURE TREATED UNPLAND OR ANY OTHER SPECIES COVERED BY THE SPEC:- IND/ME/883 (f) (PROV) DC NO 3539-ME DT 24/10/98 SIZE 52MM X 152MM X 1.6M LONG
R
Estab
Category : p
Grade : 3
Size :
S
1) Grey Iron Foundry
[ENR Registration]
Name
Specification
Use
Status
1) Wooden Packing Box for 100-120 Kgs Aerial Bomb to Drg.No.KHPK-410026(Amended)GIF-SK-2257 for 100-120
Description : Wooden Packing Box for 100-120 Kgs Aerial Bomb to Drg.No.KHPK-410026(Amended)GIF-SK-2257 for 100-120()
Specification : As per Drg. & Specification
R
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS
Description : AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS()
3) HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW[70]()
Specification : HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW
C
Estab
4) PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'[70]()
Specification : PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'
C
Estab
5) BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER[70]()
Specification : BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER
C
Estab
6) BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB[70]()
Specification : BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB
C
Estab
7) PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2[70]()
Specification : PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2
1) 9911927563 POLYTHENE BAGS SIZE H 917 X W 490 X L 800 MM TO DRG NO POLY BAG 3083
Description : 9911927563 POLYTHENE BAGS SIZE H 917 X W 490 X L 800 MM TO DRG NO POLY BAG 3083()
Specification : DRG NO POLY BAG 3083
P
Estab
2) 3000142698 EP FOAM PACKING SHEET 14 MX2MX25MM
Description : 3000142698 EP FOAM PACKING SHEET 14 MX2MX25MM()
Specification : 3000142698 EP FOAM PACKING SHEET 14 MX2MX25MM
1) Steel blank of Receiver plate Left & Right to DRG. No. SKM-960 IN FINISHED STATE()
AS PER DRG.
C
Not Estab.
2) Stem Roller to DSCAT no. 5307-000873()
AS PER DRG.
C
Not Estab.
3) Pivot Butt DS CAT no. 1005-000879()
AS PER DRG.
C
Not Estab.
4) Handle cocking slide DSCAT no. 1005-006630()
AS PER DRG.
C
Not Estab.
5) Trigger Assembly DS CAT no. 1005--006589()
AS PER DRG.
C
Not Estab.
6) ST-Forging Lever Locking DSCAT No. SKM-303()
AS PER DRG.
C
Not Estab.
7) Forging of block front DSCAT no. SKM-282*4()
AS PER DRG.
C
Not Estab.
8) Forging of Cylinder Gas DS CAT no. SKM-306*2()
AS PER DRG.
C
Not Estab.
9) Forging of Buffer Body DS CAT no. SKM-304*1()
AS PER DRG.
C
Not Estab.
10) Forging of Breech Block slide DS CAT no. 281*2()
AS PER DRG.
C
Not Estab.
11) Body cover DS CAT No. SKM- 902*1()
AS PER DRG.
C
Not Estab.
12) Band Front Sight DSCAT no. 5340-016724()
AS PER DRG.
C
Not Estab.
13) Steel Forging of Guide Front Right DRG. no. SKM-305*2()
AS PER DRG.
C
Not Estab.
14) Spindle Handle DS CAT no. 1005-006619()
AS PER DRG.
C
Not Estab.
15) Machining of Small Arms Components ()
AS PER DRG.
C
Not Estab.
Category : P
Grade : I
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FINISH MACHINING IN A SET OF FRONT PART AND REAR PART FROM INPUT MATERIAL[91]()
Specification : FINISH MACHINING IN A SET OF FRONT PART AND REAR PART FROM INPUT MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FINISH MACHINING IN A SET OF FRONT PART AND REAR PART FROM INPUT MATERIAL[91]()
Specification : FINISH MACHINING IN A SET OF FRONT PART AND REAR PART FROM INPUT MATERIAL
C
Nonestab
2) FORGING OF SLIDE TO DRG. NO. RFI SK-9073 FOR PISTOL[70]()
Specification : As per Drawing
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) TRACK LINK DRG. NO. 172.55.012[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
Category : ddp
Grade : Grade II
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FORGING BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG NO 6528254 FORGE[74]()
Specification : FORGING, BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG. NO. 6528254-FORGE
C
Nonestab
Category :
Grade : Grade III
Size :
L
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Forging Piston Extension for JVPC[01]()
Specification : Steel Forging Piston Extension for JVPC 5.56 mm as per drawing SK-5725
R
Nonestab
Category :
Grade : Grade III
Size :
L
1) Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING RAIL for JVPC[70]()
Specification : MOUNTING RAIL
C
Nonestab
2) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC SK-JVPC-108[70]()
Specification : BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm SK-JVPC-108
C
Nonestab
Category :
Grade : Grade III
Size :
L
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 FOR RIFLE 5 56[03]()
Specification : STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 AS PER DRG. NO. SK-5092*2(RAW MATERIAL SIZE- 40X50 MM BS:970 PT.1-1983,817 M40 "T"(BS:970 EN 24 "T")COND.HARDNESS 248-302 HB AGAINST L.F. NO. 0334032650 WILL BE SUPPLIED BY SAF AGAINST B/G).
R
Nonestab
Category :
Grade : Grade III
Size :
L
1) Small Arms Factory
Name
Specification
Use
Status
1) FORGING RECEIVER GUIDE FRONT RIGHT for MAG[41]()
Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2
C
Nonestab
Category :
Grade : Grade III
Size :
L
1) Small Arms Factory
Name
Specification
Use
Status
1) St Forging Plate Bottom for MAG[01]()
Specification : DRG No. SKM-283*2
R
Nonestab
2) STEEL FORGING BREECH BLOCK SLIDE FOR MAG[04]()
Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82.
C
Nonestab
3) STEEL FORGING TO FOR BLOCK FRONT OF MAG[01]()
Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM
R
Nonestab
Category :
Grade : Grade III
Size :
L
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Forging Piston Extension for JVPC[01]()
Specification : Steel Forging Piston Extension for JVPC 5.56MM as per Drawing No. SK 5725
C
Nonestab
Category :
Grade : Grade III
Size :
L
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING HAMMER FOR JVPC[01]()
Specification : STEEL FORGING HAMMER FOR JVPC 5.56 MM AS PER DRG. NO. SK JVPC 969.
C
Nonestab
2) Steel Forging Block Gas for JVPC[01]()
Specification : STEEL FORGING BLOCK GAS FOR JVPC 5.56MM AS PER DRG.NO. SK-JVPC-6003
C
Nonestab
Category :
Grade : Grade III
Size :
L
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Forging Cylinder Gas[01]()
Specification : Steel Forging Cylinder Gas SKM 306*6 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG
R
Nonestab
2) Steel Blank of Cylinder Gas[01]()
Specification : Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).
C
Nonestab
3) Rod Finish as per drawing no SK 6503 TE[70]()
Specification : Rod Finish as per drawing no SK 6503 TE
C
Nonestab
4) Guide Rod Finish as per drawing no SK 6504 TE[70]()
Specification : Guide Rod Finish as per drawing no SK 6504 TE
C
Nonestab
5) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
6) SLIDE DRG No SK 6534 TE[70]()
Specification : SLIDE DRG No SK-6534/TE
C
Nonestab
7) LATCH DRG No SK 6535 TE[70]()
Specification : LATCH DRG No SK- 6535 /TE
C
Nonestab
8) RAIL SK 6548 TE[70]()
Specification : RAIL SK-6548/ TE
C
Nonestab
9) Latch SK 6651 TE[70]()
Specification : Latch SK- 6651/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
L
614
Anubhav Textiles
117/91, K Block, Sarvodaya Nagar, Kanpur UP
PIN1 : 208025
Phone No. : 0512-2502232, 9415439339 GSTIN : 09ACVPN7682C1ZX
1) Fabrication of Bush Shirt Drill Cotton Navy Blue Half Sleeve[21]()
Specification : FABRICATION OF BUSH SHIRT DRILL COTTON NAVY BLUE HALF SLEEVE
SWO PART II No. 20138/70138.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) SA
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) Fabrication of Trousers DB White[21]()
Specification : As per the Specification
E
Nonestab
2) FABRICATION OF COAT DRILL WHITE SUIT DANGER BUILDING[21]()
Specification : SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
SWO PART II No. 20129/70129.
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRE
E
Nonestab
3) FABRICATION OF TROUSER DRILL COTTON WHITE[21]()
Specification : SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
SWO PART II No. 20172/70172.
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
E
Nonestab
4) Fabrication of DB Coat Cotton Drill White[21]()
Specification : FABRICATION OF D/B COAT COTTON DRILL WHITE - 4632 Nos
SPECIFICATION:
SWO PART No. 20136 /70136 (IFD
E
Nonestab
5) Fabrication of Trouser Drill White Suit Danger Building for Khamaria[21]()
Specification : FABRICATION OF TROUSER DRILL WHITE SUIT DANGER BUILDING FOR KHAMARIA
SPECIFICATION:
SWO PART No. 20137.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME O
E
Nonestab
6) Fabrication of Trousers Drill Khaki[21]()
Specification : FABRICATION OF TROUSERS DRILL KHAKI (SUIT DANGER BUILDING)
SWO PART II No. 20206/70206.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) SAMPLE W
E
Nonestab
7) Fabrication of Trousers Drill Cotton Khaki[21]()
Specification : FABRICATION OF TROUSERS DRILL COTTON KHAKI.
SWO PART II No. 20152/70152.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) SAMPLE WILL BE PROVIDED AT
E
Nonestab
8) Fabrication of Jacket and Trousers Combat PC Disruptive with Indian Army Logo 220 GSM[21]()
Specification : OCFAV/GARMENT/001(C) FOR JCD. OCFAV/GARMENT/002(C) FOR TCD. MAKE AND SHAPE AS PER APPROVED SAMPLE
E
Nonestab
9) Fabrication of Raincoat without Pouch[21]()
Specification : Fabrication of Raincoat without Pouch SWO Part II No. 20248/70248.
E
Nonestab
10) FABRICATION CONTRACT OF COAT DRILL WHITE QTY 373 NOS[21]()
Specification : FABRICATION CONTRACT OF COAT DRILL WHITE–QTY – 373 NOS.
SWO PART II No. 20176 / 70176
SPECIFICATION NO:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
a. Cut Components and Garnitures will be supplied by the factory.
b. Sample will be
E
Nonestab
11) FABRICATION CONTRACT OF DUST COAT DB WHITE QTY 400 NOS[21]()
Specification : FABRICATION CONTRACT OF DUST COAT DB WHITE –QTY – 400 NOS.
SWO PART II No. 20210 / 70210
SPECIFICATION NO:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
a. Cut Components and Garnitures will be supplied by the factory.
b. Sample will
E
Nonestab
12) FABRICATION CONTRACT OF COAT DRILL WHITE SUIT DB FOR AF KHADKI QTY 2788 NOS[21]()
Specification : REFER ANNEXED SPECIFICATION
E
Nonestab
13) FABRICATION CONTRACT OF MANILA SHIRT DRILL COTTON NAVY BLUE Hs QTY 2959 NOS[21]()
Specification : FABRICATION CONTRACT OF MANILA SHIRT DRILL COTTON NAVY BLUE
H/S –QTY –2959 NOS.
SWO PART II No. 20148 / 70148
SPECIFICATION NO:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
a. Cut Components and Garnitures will be supplied by the fac
E
Nonestab
14) FABRICATION CONTRACT OF MANILA SHIRT DRILL COTTON KHAKI FS FOR AFK QTY 354 NOS[21]()
Specification : FABRICATION CONTRACT OF MANILA SHIRT DRILL COTTON KHAKI F/S
FOR AFK–QTY–354 NOS.
SWO PART II No. 20150 / 70150
SPECIFICATION NO:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
a. Cut Components and Garnitures will be supplied by the fa
E
Nonestab
15) FABRICATION OF TROUSER DRILL COTTON WHITE QTY 2721 pairs[21]()
Specification : SWO PART II No. 20172 / 70172
SPECIFICATION NO:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
a. Cut Components and Garnitures will be supplied by the factory.
b. Sample will be provided at the time of fabri
R
Nonestab
16) FABRICATION OF TROUSER DRILL COTTON KHAKI QTY 354 Numbers[21]()
Specification : FABRICATION OF TROUSER DRILL COTTON KKAKI
– QTY – 354 Numbers.
SWO PART II No. 20152 / 70152
SPECIFICATION NO:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
a. Cut Components and Garnitures will be sup
R
Nonestab
17) FABRICATION OF TROUSER DRILL COTTON NAVY BLUE FOR IFD QTY 3465 pairs[21]()
Specification : FABRICATION OF TROUSER DRILL COTTON NAVY BLUE FOR IFD – QTY – 3465 pairs.
SWO PART II No. 20151 / 70151
SPECIFICATION NO:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
a. Cut Components and Garnitures will
R
Nonestab
18) FABRICATION OF PROTECTIVE LADIES OVER COAT BLUE QTY 60 NOS[21]()
Specification : FABRICATION OF PROTECTIVE LADIES OVER COAT BLUE :QTY– 60 NOS.
SWO PART II No. 20238 / 70238
SPECIFICATION NO:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
a. Cut Components and Garnitures will be supplied
R
Nonestab
19) FABRICATION OF PROTECTIVE SHIRT GREY HS QTY 960 NOS[21]()
Specification : FABRICATION OF PROTECTIVE SHIRT GREY H/S: QTY-960 NOS.
SWO PART II No. 20239/ 70239
SPECIFICATION NO:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
a. Cut Components and Garnitures will be supplied by the
R
Nonestab
20) FABRICATION OF PROTECTIVE PANT GREY QTY 960 NOS[21]()
Specification : FABRICATION OF PROTECTIVE PANT GREY : QTY-960 NOS.
SWO PART II No. 20240 / 70240
SPECIFICATION NO:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
a. Cut Components and Garnitures will be supplied by the fact
R
Nonestab
21) FABRICATION OF CAPS DB WHITE PLAIN QTY 5956 NOS[21]()
Specification : FABRICATION OF CAPS DB WHITE PLAIN : QTY-5956 NOS.
SWO PART II No. 20173 / 70173
SPECIFICATION NO:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
a. Cut Components and Garnitures will be supplied by the fa
R
Nonestab
22) FABRICATION OF TROUSER DB WHITE QTY 2788 pairs[21]()
Specification : FABRICATION OF TROUSER DB WHITE – QTY – 2788 pairs.
SWO PART II No. 20244 / 70244
SPECIFICATION NO:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
a. Cut Components and Garnitures will be supplied by the fac
E
Nonestab
Category :
Grade : Grade III
Size :
S
617
Ananth Technologies Limited
Ananth Info Park, Plot No 39, Hitec City, Phase II Madhapur Hyderabad Telangana
PIN1 : 500081
Phone No. : 66156615 GSTIN : 36AABCA7289D1ZN
Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT
C
Estab
124) LOWER STEEL ROD[90]()
Specification : LOWER STEEL ROD AS PER DRG. NO. 645-01-1320-1/A , MATERIAL STEEL BAR
C
Estab
125) PARTITION PLATE CO DRIVER SIDE DRG NO 620 07 2004 1 E[90]()
Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT
C
Estab
124) LOWER STEEL ROD[90]()
Specification : LOWER STEEL ROD AS PER DRG. NO. 645-01-1320-1/A , MATERIAL STEEL BAR
C
Estab
125) PARTITION PLATE CO DRIVER SIDE DRG NO 620 07 2004 1 E[90]()
2) PLAIN NUT M5 IS1364 PART III P 8 GALVD AND YELLOW PASSIVATED L3010518
Description : PLAIN NUT M5 IS1364 PART III P 8 GALVD AND YELLOW PASSIVATED L3010518()
