1) DPICM BODY EMPTY FOR DPICM WARHEAD AS PER THE ARDE DRAWING NO 86030304020100100DB
Description : DPICM BODY EMPTY FOR DPICM WARHEAD AS PER THE ARDE DRAWING NO 86030304020100100DB()
Specification : as per drg
C
Estab
Category : p
Grade : 1
Size :
O
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) GROUND STAINLESS STEEL ROD TO SPECIFICATION IS 6603 GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 27MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS
Description : GROUND STAINLESS STEEL ROD TO SPECIFICATION IS 6603 GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 27MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS()
Specification : GROUND STAINLESS STEEL ROD TO SPECIFICATION IS:6603, GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 27MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS
R
Estab
2) GROUND STAINLESS STEEL ROD TO SPECIFICATION IS 6603 GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 20MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS
Description : GROUND STAINLESS STEEL ROD TO SPECIFICATION IS 6603 GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 20MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS()
Specification : GROUND STAINLESS STEEL ROD TO SPECIFICATION IS:6603, GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 20MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS
R
Estab
3) GROUND STEEL ROD TO SPECIFICATION IS 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 11M 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS HARDNESS 300 to 340HV
Description : GROUND STEEL ROD TO SPECIFICATION IS 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 11M 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS HARDNESS 300 to 340HV()
Specification : GROUND STEEL ROD TO SPECIFICATION IS: 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 11MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS. HARDNESS – 300 to 340HV
R
Estab
4) GROUND STEEL ROD TO SPECIFICATION IS 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 17MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS HARDNESS 300 to 340HV
Description : GROUND STEEL ROD TO SPECIFICATION IS 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 17MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS HARDNESS 300 to 340HV()
Specification : GROUND STEEL ROD TO SPECIFICATION IS:5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 17MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS.HARDNESS – 300 to 340HV
R
Estab
5) BRASS ROD TO SPECIFICATION IS 4170 GRADE CUZN40 IN AS MANUFACTURED CONDITION TO SIZE 3MM DIA O POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS
Description : BRASS ROD TO SPECIFICATION IS 4170 GRADE CUZN40 IN AS MANUFACTURED CONDITION TO SIZE 3MM DIA O POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS()
Specification : BRASS ROD TO SPECIFICATION IS 4170 GRADE CUZN40 IN AS MANUFACTURED CONDITION TO SIZE 3MM DIA +/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS
R
Estab
6) COPPER ROD TO SPECIFICATION IS 4171 IN AS MANUFACTURED CONDITION HAVING DIA 5MM 0 POINT 05 MM
Description : COPPER ROD TO SPECIFICATION IS 4171 IN AS MANUFACTURED CONDITION HAVING DIA 5MM 0 POINT 05 MM()
Specification : COPPER ROD TO SPECIFICATION IS 4171 IN AS MANUFACTURED CONDITION HAVING DIA 5MM+/-0.05MM
R
Estab
7) WASHER I TO ARDE DRG NO 0901 00 00 00 00 001 00PB
Description : WASHER I TO ARDE DRG NO 0901 00 00 00 00 001 00PB()
9) GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN IND ME 951 PROV GRADE A OR MOULDING POWER TO SPECN JSS 9330 05 TYPE I
Description : GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN IND ME 951 PROV GRADE A OR MOULDING POWER TO SPECN JSS 9330 05 TYPE I()
Specification : GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN IND ME 951 PROV GRADE A OR MOULDING POWER TO SPECN JSS 9330 05 TYPE I
R
Estab
10) NICKEL CHROMIUM WIRE APPROX 80 20 Ni Cr DIAMETER 0 0305MM NOMINAL RESISITANCE 1481 OHMS 12 5 PERCENT PER METER TO B S 1117 PT 2 1964 TYPE 3 GRADE C4
Description : NICKEL CHROMIUM WIRE APPROX 80 20 Ni Cr DIAMETER 0 0305MM NOMINAL RESISITANCE 1481 OHMS 12 5 PERCENT PER METER TO B S 1117 PT 2 1964 TYPE 3 GRADE C4()
Specification : NICKEL CHROMIUM WIRE APPROX 80:20 Ni:Cr DIAMETER 0.0305MM NOMINAL RESISITANCE 1481 OHMS+/-12.5% PER METER TO B.S. 1117 PT 2 1964,TYPE 3 GRADE C4
R
Estab
11) TRANSIT CAP TO ARDE DRG NO 0901 00 02 01 00 005 00PB FOR SQUIB HOUSING ASSY EMPTY TO DRG NO 0901 00 00 02 01 000 00PB
Description : TRANSIT CAP TO ARDE DRG NO 0901 00 02 01 00 005 00PB FOR SQUIB HOUSING ASSY EMPTY TO DRG NO 0901 00 00 02 01 000 00PB()
Specification : TRANSIT CAP TO ARDE DRG.NO. 0901 00 02 01 00 005 00PB (FOR SQUIB HOUSING ASSY (EMPTY) TO DRG.NO. 0901 00 00 02 01 000 00PB)
C
Estab
12) SAFETY CUP TO DRG NO 0901 00 02 01 00 006 00PB
Description : SAFETY CUP TO DRG NO 0901 00 02 01 00 006 00PB()
Specification : SAFETY CUP TO DRG.NO.0901 00 02 01 00 006 00PB
C
Estab
13) CELLULOID DISC TO ARDE DRG NO 0901 00 01 01 00 004 00PB FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB
Description : CELLULOID DISC TO ARDE DRG NO 0901 00 01 01 00 004 00PB FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB()
1) SET OF 3 SECONDAY COMPT IS-412, 413, (9911357017)()
SECONDARY COMBUSTIBLE CARTG CASE, SET OF 3 COMPONENTS:- (1) COM-BUSTIBLE SLEEVE FOR FRONT CARTG. TO DRG PT NO ISX-412, DC NO-36698-A DT 14/8/2K (2) COMBUSTIBLE CAP FOR FRONT CARTG TO DRGPT.NO. ISX-413 DC 36698-A DT 14/8/2K (3) COMBUSTIBLE BODY FORFRONT CA
1) SEPARATORS (FOR CARTON 23A FOR PACKING 9MM) DRG NO. CIA/AMN/2397 PART NO. ISV 213 SA()
DRG NO. CIA/AMN/2397 PART NO. ISV 213 SA
C
Non Established
2) TRAY PLASTIC TO DRG NO 04-44-79000-06131-3 (AFK/SK-2223)()
DRG NO 04-44-79000-06131-3 (AFK/SK-2223)
E
Non Established
3) PLASTIC BOX FOR PACKING OF CARTGS. SA 0.22 RF BALL TO DRG. NO. AFK/SK 586-09 SHT. 1()
DRG. NO. AFK/SK 586-09 SHT. 1
E
Non Established
4) CONTAINER NO.P-14 TO HOLD CARTG S.E. SETS TO DRG.NO.ARDE-1824 SPECN.CQA(A) 2804()
CQA(A) 2804
E
Non Established
5) CONTAINER NO. R1 MK1 (IN) AS PER DRG.NO. ARDE 2025 WITH DET.NO.1()
DRG.NO. ARDE 2025 WITH DET.NO.1
E
Non Established
6) CONTAINER NO. P-17 (EMPTY ASSY) TO DRG NO ARDE 1910 DET. NO.1()
DRG NO ARDE 1910 DET. NO.1
E
Non Established
7) PAPER AIR CUSHION FOR CARTG. S.A.12 BORE 65 MM AS PER DRG.NO. KF/SK/1358 SHT.NO. 3()
DRG.NO. KF/SK/1358 SHT.NO. 3
C
Non Established
8) PLASTIC INDEX DISC FOR CTG. SA 12 BORE 65 MM/ 70 MM TO DRG. NO. AFK/SK 2888()
DRG. NO. AFK/SK 2888
C
Non Established
9) PLASTIC INDEX DISC SHOT NO.1 FOR CARTG SA 12 BORE IN YELLOW COLOUR AS PER DRG.NO.AFK/SK-2888()
DRG. NO. AFK/SK 2888
C
Non Established
10) PLASTIC INDEX DISC SHOT NO.BB FOR CARTGS SA 12 BORE IN WHITE COLOUR AS PER DRG.NO.AFK/SK-2888()
DRG. NO. AFK/SK 2888
C
Non Established
11) PLASTIC INDEX DISC SHOT NO.8 OF CARTGS SA 12 BORE IN RED COLOUR AS PER DRG.NO.AFK/SK-2888()
DRG. NO. AFK/SK 2888
C
Non Established
12) PLASTIC INDEX DISC SHOT NO.4 FOR CARTG SA 12 BORE IN BLACK COLOUR AS PER DRG.NO.AFK/SK-2888()
DRG. NO. AFK/SK 2888
C
Non Established
13) PLASTIC INDEX DISC SHOT NO.7 FOR CARTGS SA 12 BORE IN BLUE COLOUR AS PER DRG.NO.AFK/SK-2888()
DRG. NO. AFK/SK 2888
C
Non Established
14) PLASTIC INDEX DISC-SHOT NO.6 FOR CARTGS SA 12 BORE IN ORANGE COLOUR AS PER DRG.NO.AFK/SK-2888()
DRG. NO. AFK/SK 2888
C
Non Established
15) PLASTIC INDEX DISC SHOT NO.2 FOR CARTG SA 12 BORE IN BORE IN GREEN COLOUR AS PER DRG.NO.AFK/SK-2888()
DRG. NO. AFK/SK 2888
C
Non Established
16) PLASTIC INDEX DISC SHOT NO.9 FOR CARTGS SA 12 BORE IN PINK COLOUR AS PER DRG.NO.AFK/SK-2888()
DRG. NO. AFK/SK 2888
C
Non Established
Category : P
Grade : II
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) DISC CLOTH,SIZE:31.75MM DIA x 1.14MM THICK()
CLOTH ALL WOOL(MELTON FINISH)TO SPECN:JSS:8305-16:(REV.2) OR CLOTH COLAR,WHITE TO SPECN:JSS:8305-21:2013 REV.3 REF.DRG.CIA/AMN/2176,PART NO-ISX 77 GF,ITEM NO-11.DC:37013A, DT.06.05.2005.
C
Not Estab
2) DISC()
DRG. CIA/AMN/1901 DETAIL.2 PART NO: IQX-783 FOR PELLET SMOKE, 42.5 GRAM, TNT/AL70/30 TO DRG. CIA/AMN/1901 DCI 35462-A DT.3.3.93. [MATERIAL:PAPER WHITE FINE TO SPECN.JSS 9310-06:2002 REAFFIR MED 2011]
C
Not Estab
3) DISC PAPER WRAPPING HARD, 30.99 MMDIA.()
MATERIAL-PAPER CRAFT AMMN. TO SPECIFICATION JSS:8135 -017:2010,DC-5016-ME DT.16.03.2011 FOR CE PELLET (MK 1/1/L, 53.16 GRAM) TO DRG. NO.SX 12 AF. DC NO.35452-A DT.07.09.93.
C
Not Estab
4) DISC,45.2MM DIA()
PAPER WHITE FINEAMMN TO SPECN.JSS:9310-06:2011,DC :5044 ME,DT.15.12.2011 TREATED WITH NC LACQUER AND DUSTED WITH FRENCH CHALK. REF. DRG.NO.CIA/AMN/2176, PART NO-ISX-77 GF,ITEM NO-3, DC:37013-A,DT.06.05.2005 .
Specification : S/A OF TC WITH COVER PT. NO. B1900905 HASH.0 CONSISTING OF (1) X1801622 (2) B-1900113 HC TR. CASE COVER (3)F0936215 HB DOWEL (4) F3756715(Ref -F37403154-HA) (5) L3080511 PL. NUT (6) L4100500 SC. WASHER
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) SEAT BASE ASSY FRONT LHS[90]()
Specification : SEAT BASE ASSY (FRONT LHS) DRG. NO. 640-08-1070-1/C
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) 9010398122000 BUMPER ASSY AND DETAILS FOR UPGRADED MPV 4X4[90]()
Specification : DRG. 2725-57-31
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) REAR SEAT ASSY[90]()
Specification : REAR SEAT ASSY DRG. NO. 485-03-1030 A
E
Nonestab
Category :
Grade : Grade III
Size :
M
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) BUMPER ASSY.[90]()
Specification : BUMPER ASSY. (CONSISTING OF THREE DRAWINGS) DRG. NO. 620-01-3110-1/F
C
Nonestab
2) FUEL TANK ASSY.[90]()
Specification : FUEL TANK ASSY. ( CONSISTING OF SEVEN DRAWINGS) DRG. NO. 640-01-2550-1/D
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) BUMPER ASSY.[90]()
Specification : BUMPER ASSY. (CONSISTING OF THREE DRAWINGS) DRG. NO. 620-01-3110-1/F
C
Nonestab
2) STRETCHER (MEDICAL PURPOSE)[90]()
Specification : STRETCHER (MEDICAL PURPOSE) SPECN. NO. OFPM/R&D/SP/MPV/ STRETCHER MEDICAL PURPOSE FOR MPV/015
C
Nonestab
3) FUEL TANK ASSY.[90]()
Specification : FUEL TANK ASSY. ( CONSISTING OF SEVEN DRAWINGS) DRG. NO. 640-01-2550-1/D
C
Nonestab
4) SEAT BASE ASSY (REAR LHS)[90]()
Specification : SEAT BASE ASSY (REAR LHS) DRG. NO. 645-08-1050-1
C
Nonestab
5) SEAT BASE ASSY (FRONT LHS)[90]()
Specification : SEAT BASE ASSY (FRONT LHS) DRG. NO. 640-08-1070-1/C
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Load Body Complete Drg No B6510604 C 1 for Stallion vehicle[90]()
Specification : As per specification / drg.
C
Nonestab
2) BRACKET ON FRAME[90]()
Specification : BRACKET ON FRAME, PART NO. F-0420714
C
Nonestab
3) BODY MTG 4TH RH LH[90]()
Specification : BODY MTG 4TH RH/LH DRG./PART NO.X-7135410 HASE
C
Nonestab
4) END BKT LH BRKT FOR CROSS MEMBER[90]()
Specification : END BKT LH BRKT FOR CROSS MEMBER, PT. NO.X 0476210-HASE
Specification : ASSY MTG SPARE WHEEL CARRIER (WITHOUT LIFTING UNIT) (CONSISTING OF COMPONENTS AS PER LIST ATTACHED)
C
Nonestab
3) LPTA Assy Spare wheel lifting Unit[90]()
Specification : ASSY SPARE WHEEL LIFTING UNIT - COMPLETE INCLUDING ASSEMBLY HANDLE AND ROPE TO DRG. NO. CONSISTING OF DRGS. AS PER LIST ATTACHED.
C
Nonestab
4) LPTA LPTA LOAD BODY[90]()
Specification : LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL
C
Nonestab
5) LPTA Set of WASHER[90]()
Specification : SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET
C
Nonestab
6) LPTA Vehicle Identification plate[90]()
Specification : VEHICLE IDENTIFICATION PLATE FOR LPTA 715TC/32 BS-III VEHICLE
C
Nonestab
7) LPTA ASSY FUEL TANK COMPLETE[90]()
Specification : ASSY FUEL TANK COMPLETE 2154 4750 0102-V2 WITH ASSY DIP STICK PTNO.261447100211 FLOAT VALVE DRG.0005420.204J (215447500101(V-2) ASSY.AIR BREATHER PTNO 2574 2815 9901 & SUCTION TUBE WITH FUEL TANK(275147100106)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA ASSY BUMPER FRONT[90]()
Specification : ASSY BUMPER FRONT
C
Nonestab
2) LPTA Assy Mounting Spare Wheel Carrier[90]()
Specification : ASSY MTG SPARE WHEEL CARRIER (WITHOUT LIFTING UNIT) (CONSISTING OF COMPONENTS AS PER LIST ATTACHED)
C
Nonestab
3) LPTA Assy Spare wheel lifting Unit[90]()
Specification : ASSY SPARE WHEEL LIFTING UNIT - COMPLETE INCLUDING ASSEMBLY HANDLE AND ROPE TO DRG. NO. CONSISTING OF DRGS. AS PER LIST ATTACHED.
C
Nonestab
4) LPTA LPTA LOAD BODY[90]()
Specification : LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL
C
Nonestab
5) LPTA Set of WASHER[90]()
Specification : SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET
C
Nonestab
6) LPTA Vehicle Identification plate[90]()
Specification : VEHICLE IDENTIFICATION PLATE FOR LPTA 715TC/32 BS-III VEHICLE
C
Nonestab
7) LPTA ASSY FUEL TANK COMPLETE[90]()
Specification : ASSY FUEL TANK COMPLETE 2154 4750 0102-V2 WITH ASSY DIP STICK PTNO.261447100211 FLOAT VALVE DRG.0005420.204J (215447500101(V-2) ASSY.AIR BREATHER PTNO 2574 2815 9901 & SUCTION TUBE WITH FUEL TANK(275147100106)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA ASSY BUMPER FRONT[90]()
Specification : ASSY BUMPER FRONT
C
Estab
2) LPTA Assy Spare wheel lifting Unit[90]()
Specification : ASSY SPARE WHEEL LIFTING UNIT - COMPLETE INCLUDING ASSEMBLY HANDLE AND ROPE TO DRG. NO. CONSISTING OF DRGS. AS PER LIST ATTACHED.
C
Estab
3) LPTA LPTA LOAD BODY[90]()
Specification : LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL
C
Estab
4) LPTA Set of WASHER[90]()
Specification : SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET
C
Estab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Bkt. Air Reservoir- B-3910101[90]()
Specification : As per specification / Drawings
C
Nonestab
2) S/A of shock Absorber BKT -B-6000301 VI[90]()
Specification : As per specification/Drawings
C
Nonestab
3) OIL CAN[90]()
Specification : OIL CAN OIL CAN DRG./PART NO.F-4730500-V1
C
Nonestab
4) BKT REVERSE BEEPER[90]()
Specification : BKT. REVERSE BEEPER, PART NO./DRG NO. F7195914 A
C
Nonestab
5) SPARE WHEEL CARRIER ASSY WITHOUT REDUCTION GEAR BOX[90]()
Specification : SPARE WHEEL CARRIER ASSY. W/O SPARE WHEEL CARRIER ASSY. PART NO. A0909100 WITHOUT REDUCTION GEAR BOX TO (PART NO. X3917700 CONSISTING OF 60 ITEM AS PER LIST ENCLOSED. N/A
C
Estab
6) Load Body Accessories[90]()
Specification : As per specification / drg.
C
Nonestab
7) Load Body Complete Drg No B6510604 C 1 for Stallion vehicle[90]()
Specification : As per specification / drg.
C
Nonestab
8) BKT FILTER MTG[90]()
Specification : BKT FILTER MTG, PART NO. X-7115314
C
Nonestab
9) BRACKET AGB[90]()
Specification : BRACKET -AGB (102-04), PART NO. X0472614-V1
C
Nonestab
10) RADIATOR MOUNTING BKT[90]()
Specification : as per component drg/part no.
C
Nonestab
11) SILENCER MTG BKT[90]()
Specification : SILENCER MTG.BKT., PART NO. F3B00714-#.0
Specification : CQA[A] SEALED DRG NO 04-749-130222-02.1E
C
Nonestab
3) IGNITER CASING DRG.NO.KF/PJ/SK/-5[60]()
Specification : CQA(A) SEALED DRG NO 04-749-130222-03.1E
C
Nonestab
4) SMOKE COMP.CASING DRG.NO.KF/PJ/SK12[60]()
Specification : CQA[A] SEALED DRG NO 04-749- 130222-05.1E
C
Nonestab
5) IGN. ELEMENT,FIRE. BOLT,SAFETY CASE[60]()
Specification : DRG.NO. CQA(A)/AMN/3229 PART NO. IQV 30 A
C
Nonestab
6) IGNITION ELEMENT04-44-79000-06105-4E[99]()
Specification : DRG.NO. 04-44-79000-06105-4E
C
Nonestab
7) INNER CASE DRG 04-44-79000-06103-3E[99]()
Specification : DRG. NO. 04-44-79000-06103-3E
C
Nonestab
8) CARTG.CASE DRG ARDE/2165/2 ERU 204[60]()
Specification : SPECN.ARDE/SPECN/423
C
Nonestab
9) COMPONENTS FOR CARTG. 40MM MGL AMN[60]()
Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP
C
Nonestab
10) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 SPECN. DGOF 135[60]()
AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011
CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.
C
NOT ESTABLISHED
10) SET OF CARRIER 4A/L & CARRIER 5A/L (9911358263)()
SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIER-5A/L (STEEL) TO
C
NOT ESTABLISHED
11) BOX C-18A/L STEEL SERVICEABLE (6570354000)()
AMMUNITION CONTAINER BOX C-18 A/L (STEEL) TO DRG. PT. NO. ISV 282-A DC NO 35479-A DT.23-03-93 SPECN:-IA-1169 (n), DC 35576-A AIDE MEMORIE P/11
C
Non Established
Category : P
Grade : III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CATCH LOCK ASSY DRG.NO. IA-1053 4 CO (9911358061)[65]()
Specification : CATCH LOCK ASSY AS PER DRG.NO. IA-1053 SHT 1, SHT 2, SHT 3, SHT 4 & SHT 5 SET OF 4 COMPONENTS (ONE EACH) 1 CATCH, 2-LINK, 3-HOOK PLATE, 4-HASP
Specification : CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.
R
Estab
9) SET OF CARRIER 4A/L & CARRIER 5A/L (9911358263)[65]()
Specification : SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIE
Specification : AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011
Specification : AMMUNITION CONTAINER BOX C-18 A/L (STEEL) TO DRG. PT. NO. ISV 282-A DC NO 35479-A DT.23-03-93 SPECN:-IA-1169 (n), DC 35576-A AIDE MEMORIE P/11
R
Estab
12) TAIL UNIT NO- TB 250 (9911358363)[99]()
Specification : TAIL UNIT NO.TB-250,DRG.NO.ARDE-9501-03 DT.19 APR 2000.AND SPECN.NO.ARDE/SPECN./613 PROVISIONALLY APPROVED ON 19 APR2000 AND AMENDED VIDE RCMA(AA)/1440/5/TECH DATED 29 APR 2010.PACKAGE DESCRIPTION-BOX STEEL NO.1 MK-I TO HOLD 1 TO DRG.NO.A
C
Nonestab
13) TAIL UNIT NO-1111 FOR 1000 LBS (9911358361)[99]()
Specification : TAIL UNIT NO.-1111 TO DRG.NO.ARDE-2139 DET.NO.1,2 SHTS,SHT NO.1,R NO.2 DATE 18-10-96 AND SHT NO.2 R NO.2 DT.02-12-2002AND SPECN.NO.ARDE/SPECN./459 PROVISIONALLY APPROVED ON 16JULY 1992.PACKAGE DESCRIPTION-CONTAINER FOR TU NO.1111 TODRG.NO
C
Nonestab
14) TAIL UNIT NO-2211 (BTU 450) (9911358362)[99]()
Specification : TAIL UNIT NO.-2211 (B.T.U.-450) DRG.NO.ARDE-2121,R.NO.3 DATE 20-09-2014 AND SPECN NO.ARDE/SPECN./390 PROVISIONALLYAPPROVED ON 27 NOV 1990.PACKAGE DESCRIPTION-BOX WOOD NO.P21MK-I TO HOLD 1 BTU 2211 TO DRG.NO.ARDE 2173,SHEET NO.-03,SHEET NO
C
Nonestab
Category : p
Grade : Grade III
Size :
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) CHEST RIFLE 5.56MM (WOODEN) CAPACITY-10 RIFLES WITH ACCESSORIES FOR RIFLE 5.56MM INSAS. ()
AS PER DRAWING
E
Not Estab.
Category : P
Grade : III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Cylinder 12 A ( PRB ) steel for Ammn Container Assembly 117 A ()
DRG. NO. 13979-0-0 DC NO. 35707 AND LEAK TEST AS PER SPECN-IA 1169(n) DC NO. 35707-A
R
Non Established
6) WOODEN BOX FOR PROP BPC(4W-20)()
AS PER DRAWING ATTACHED, SPEC. DRG. NO. NAI (J)
R
Non Established
7) WOODEN BOX FOR BPC (5b-84)()
AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.
R
Non Established
8) BOX WOOD NO. PZ-1()
DRG. NO. ARDE 1953 SHEET NO. 1,2&3 AND ARDE-1953 DET NO. 4(OFBA/RK/504,505,506 &507 RESPECTIVELY
R
Non Established
9) BOX C-26 A()
WOOD FOR PACKAGE AMMUNITION, 92 A PART NO. ISV-352A, DRG-CIA/AMMN 1773 DC-35922-A DTD. 23.02.95 & SPECN., IA-948 (a,f) DC-36081 A
R
Non Established
10) BOX PETN/RDX 1A-L WOOD()
FOR PACKING PETN/RDX AS PER DRG. NO. IND/ME/59 DC NO. 3604-ME DTD. 13/12/1999
R
Non Established
11) PACKING BOX FOR CLC-1()
AS PER DRG. NO. HERML DRG. HE/CAST/089-SHT NO. 2. HEMRL DRG. NO. HE/CAST/089-DET NO. 1,DET NO.2, DET NO. 3, DET NO.4 DET NO.5, DET NO.6, DET NO. 7, DET NO. 8 & DET NO.9
R
Non Established
12) PACKING BOX FOR CLC-2()
AS PER HEMRL DRG. NO. HE/CAST/090-SHT NO.1. SHT NO.2, HEMRL DRG. NO. HE/CAST/089-DET NO.1,DET NO.2, DET NO.3,DET NO.4, HEMRL DRG NO. HE/CAST 090, DET NO. 1, DET NO.2 HEMRL DRG. NO. HE/CAST 089, DET NO. 7, DET NO. 8 DET NO. 9
R
Non Established
13) PACKING BOX FOR CLC-3()
AS PER HEMRL DRG. NO. HE/CAST/091-SHT NO.1. SHT NO.2, HEMRL DRG. NO. HE/CAST/089-DET NO.1,DET NO.2, DET NO.3,DET NO.4, HEMRL DRG NO. HE/CAST 091, DET NO. 1, DET NO.2 HEMRL DRG. NO. HE/CAST 089, DET NO. 7, DET NO. 8 DET NO. 9
R
Non Established
14) PACKING BOX FOR CLC-4()
AS PER HEMRL DRG. NO. HE/CAST/092-SHT NO.1. SHT NO.2, HEMRL DRG. NO. HE/CAST/089-DET NO.1,DET NO.2, DET NO.3,DET NO.4, HEMRL DRG NO. HE/CAST 092, DET NO. 1, DET NO.2 HEMRL DRG. NO. HE/CAST 089, DET NO. 7, DET NO. 8 DET NO. 9
R
Non Established
15) PACKING BOX OF FLSC-10()
AS PER OFBA DRG. NO. OFBA/CX/272
R
Non Established
16) UNIT LOAD 155 CHARGE M4 A2()
AS PER DRG. NO. 13646-4-0 DC NO. 35707-A, AS PER CFA DRG. NO. 13-S/003,13-S/003/1,13-S/003/2, 13-S/003/3, 13-S/003/4, 13-S/003/5 AND 13-S/003/6
R
Non Established
17) UNIT LOAD FOR 155MM CHARGE-9()
AS PER DRG. NO. 13 S 002 & DRG. NO. 4085566
R
Non Established
18) METALLIC CONTAINERS FOR CHARGE M4A2()
AS PER CQA(AMMN.) KIRKEE DRG. NO. 13979-0-0, DC NO. 35707-A AND LEAK TEST AS PER SPECN. 1A 1169 (n)DC NO. 35707-A-05.05.1994
R
Non Established
19) ALUMINIUM CONTAINER()
AS PER DRG NO.OFBA/PETN/23.
R
Non Established
20) BOX-C 27-A TIN PLATE()
FOR PACKAGE, AMMUNITION, 92A, DRG. NO. OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A
R
Non Established
21) CASE HEMK-1 (MODIFIED)()
CASE HEMK 1 (MODIFIED) L/A WOOD TO DRG. NO. IND/ME/29, DC NO. 3604-ME DTD. 13.12.99
R
Non Established
22) CYLINDER 443 MK 1/L()
GALVANIZED STEEL SHEET TYPE DEEP DRAWING DESIGNATION B GPO TO SPECN. IS:277-2003. AS PER DRG. NO. OFBA/CX/51 DT.24.02.1989 & 05.01.2007 (FOR ITEM NO. 5 & 6) AMENDED ON DT.10.10.2008. TRACED FROM DRG.NO. DD (L) 16472 B AMENDED VIDE DC. NO. 37189-A DT. 22.
R
Non Established
Category : P
Grade : III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Ammunition Box for Cartridge Belts with 7.62mm Rifle Cartridges for 7.62mm PKT Gun()
As per Drg. No. 65 P 13000
C
Not Established
Category : P
Grade : III
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Catch 6 AL()
As per Drg. & Specification
C
Not Established
2) Top Frame 13A()
As per Drg. & Specification
C
Not Established
3) Bottam Frame 13A()
As per Drg. & Specification
C
Not Established
4) Plate Engaging H2A()
As per Drg. & Specification
C
Not Established
5) Catch H2A()
As per Drg. & Specification
C
Not Established
Category : DP
Grade : III
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Wooden Packing Box for 100/120 Kg Aerial Bombs()
1) 0133030122 ERA MOUNTING PLATE ASSEMBLY TOP
Description : 0133030122 ERA MOUNTING PLATE ASSEMBLY TOP()
Specification : ERA MOUNTING PLATE SEEMBLY ( TOP) AS PER DRG NO. CVRDE/DV/ERA STAND/01-T & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFENER PLATES
C
Estab
2) 0133030123 ERA MOUNTING PLATE ASSY STD
Description : 0133030123 ERA MOUNTING PLATE ASSY STD()
Specification : ERA MOUNTING PLATE ASSEMBLY (STD) AS PER DRG NO. CVRDE/DV/ERA STAND/01-S & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFERNER PLATES
C
Estab
Category : p
Grade : 3
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) FLAME SENSOR TO SPECIFICATION NO OFPM R AND D SP MPV FLAME SENSOR[90]()
Specification : FLAME SENSOR TO SPECIFICATION NO. OFPM/R&D/SP/MPV/FLAME SENSOR
