5) Three Layer Water Proof Breathable Fabric Dual Shade OG/White 118 cm()
As per specification & Requirement
R
Non Established
6) Fabric Nylon 75 GSM White PU Coated 152 cms()
Scheduled No IND/TC/0157 Firm trade mark in abbreviated form in smallest possible letter to be printed on the uncoated side of the fabric along selvedge at an interval of one metre. The height of letter should not exceed 8 mm. Dark/Bright colou
Specification : Prov.Specn.No. ADRDE/SPECN.1983/14(except Air porosity Test)
E
Estab
Category : DDP
Grade : II
Size :
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) 100 Percent Nylon PU coated water proof and wind proof breathable plain weave fabric 100 GSM OG width 150 cm min[21]()
Specification : 100% Nylon PU coated water proof and wind proof breathable plain weave fabric 100 GSM OG width 150 cm (min.)
Specn:- Appendix "A" of Provisional Specification No. OCFS/039/Jacket ECC Two Layer
Specification : 100% POLYESTER MICROFILAMENT WOVEN FABRIC JUNGLE GREEN 70 GSM WIDTH 150CM MIN.
APPENDIX 'B' OF PROVISIONAL SPECIFICATION NO. OCFS/039/JACKET ECC TWO LAYER
R
Estab
3) 100 Percent Nylon micro filament woven Rip stop fabric olive green 50 GSM width 150 cm min[21]()
Specification : 100% Nylon micro filament woven Rip stop fabric olive green 50 GSM width 150 cm (min.)
Specn:- Appendix "C" of Provisional Specification No. OCFS/039/Jacket ECC Two Layer
R
Estab
Category :
Grade : Grade III
Size :
M
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabric Nylon 220 GSM White Water and Oil repellent 100 cm[21]()
Specification : Fabric Nylon 220 GSM White Water and Oil repellent 100 cm. Specification No.IND/TC/0160 EXCEPT TEST PARAMETERS Water Vapour Transmission and Air permeability not to be tested.
Specification : FABRIC POLYESTER WHITE (WIND CHEATER) 115 GSM WIDTH 150CM (MIN.) PANTONE SHADE NO. 11-0602 TPX
SPECIFICATION:- AS PER APPENDIX 'A' OF PROVISIONAL SPECIFICATION N. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6
R
Estab
3) OUTER SHELL FABRIC OUTER JACKET NYLON 95 GSM LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE WIDTH 150CM MIN PANTONE SHADE NO 19 0511 TPX[21]()
Specification : OUTER SHELL FABRIC (OUTER JACKET) NYLON, LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE, 95 GSM, WIDTH 150CM (MIN.) PANTONE SHADE NO. - 19-0511 TPX.
SPECIFICATION:- AS PER APPENDIX 'B' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT
R
Estab
4) OUTER AND INNER SHELL NYLON FABRIC INNER JACKET NYLON 60 GSM WIDTH 150 CM MIN PANTONE SHADE NO 19 0511 TPX[21]()
Specification : OUTER AND INNER SHELL NYLON FABRIC (INNER JACKET) NYLON 60 GSM WIDTH 150 CM (MIN.) PANTONE SHADE NO. - 19-0511 TPX
SPECIFICATION :- AS PER APPENDIX 'E' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6
R
Estab
Category :
Grade : Grade III
Size :
M
1Ordnance Equipment Factory
Name
Specification
Use
Status
1) DRILL COTTON PROOFED WHITE (BLEACHED ) 71 CM[21]()
Specification : IND/TC/097 (c)
R
Estab
Category :
Grade : Grade III
Size :
M
1Ordnance Equipment Factory
Name
Specification
Use
Status
1) FABRIC NYLON TAFFETA 85 GSM WATER RESISTANT 155 CMS WIDE NAVY BLUE[21]()
Specification : AS PER TABLE-1 OF SPECN.NO. AIR HQ/JDQAS/OK-004
Specification : CROME PLATED DE SPANNER 8X9 EVEREST/TAAPARIA/GEDORE/JHALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700111-V3.
C
Nonestab
2) Cr PLTD DE SPANNER 14X15[90]()
Specification : CROME PLATED DE SPANNER 14X15 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700211-V4
C
Nonestab
3) NIC CROME PLATED RING SPA10X11[90]()
Specification : CROME PLATED RING SPANNER 10X11 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/ BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.F4735500-V2
C
Nonestab
4) CROME PLATED DE SPANNER 25X28[90]()
Specification : CROME PLATED DE SPANNER 25X28 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A -SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.X4700611-V4 DRG. NO. X4700211-V4
C
Nonestab
5) CROME PLATED SCREW DRIVER 8 inch[90]()
Specification : CROME PLATED SCREW DRIVER 8"(200mm 1.6X10 mm) EVEREST/TAAPAR IA/AMBIKA TOOLS/GEDORE/JHALANI/JK/JHALANI EXPERT/BETA/VENUS MAKE AS PER IS:844 (PART-II)MADE OF CHROME VANADIUM STEEL.
C
Nonestab
6) Cr PLTD DE SPANNER 12 X 13 mm[90]()
Specification : CROME PLATED DE SPANNER 12 X 13 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS:2028-A-SERIES-C MADE OF CROME VANADIUM STEEL.
C
Nonestab
7) CR PL HEX SOC SCREW KEY 6 MM[90]()
Specification : CROME PLAED/BLACK FINISH HEXAGON SOCKET SCREW KEY 6 MM EVERE ST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS /JHALANI/JHALANI EXPER /JK/ BETA MAME ASPER IS:3082 MADE OF CROME VANADIUM STEEL.
C
Nonestab
8) CR PL HEX SOC SCREW KEY 10 MM[90]()
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 10 MM EVEREST/TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/ VENUS/ JK/BETA MAKE AS PER IS:3082 MADE OF CROME VANADIUM STEEL.
C
Nonestab
9) Cr PLTD DE SPANNER 24X26[90]()
Specification : CROME PLATED DE SPANNER 24X26 mm EVEREST/TAAPARIA/GEDORE/JHA LANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS:2028 -A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X 4700511-V3.
C
Nonestab
10) NIC CROME PLATED RING SPA18X19[90]()
Specification : CROME PLATED RING SPANNER 18X19 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKAA/VENUS TOOLS MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. DRG.NO.X4704011-V2
C
Nonestab
11) CROME PLATED DE SPANNER 21X23[90]()
Specification : CROME PLATED DE SPANNER 21X23mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS:2028- A-SERIES-C MADE OF CROME VANADIUM STEEL.
C
Nonestab
12) Cr PLTD DE SPANNER 16 X 17[90]()
Specification : CROME PLATED DE SPANNER 16 X 17 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/MAKE AS PER IS 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4734911-V3.
C
Nonestab
13) NIC CROME PLATED RING SPA19X22[90]()
Specification : CROME PLATED RING SPANNER 19X22 mm EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/J K/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4701011-V2.
C
Nonestab
14) CROME PLATED DE SPANNER 24X27[90]()
Specification : CROME PLATED DE SPANNER 24X27mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE ACCEPTABL E AS PER IS-2028-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO- X4700411-V3.
C
Nonestab
15) NIC CROME PLATED RING SPA24X27[90]()
Specification : CROME PLATED RING SPANNER 24X27 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER -IS:2029-1998-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO.X4701111-V2.
C
Nonestab
16) NIC CROME PLATED RING SPA14X15[90]()
Specification : CROME PLATED RING SPANNER 14X15 MM EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700911-V2.
C
Nonestab
17) Cr PLTD DE SPANNER 19X22[90]()
Specification : CROME PLATED DE SPANNER 19X22 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. X4700311-V4 DRG.NO. X4700211-V4.
C
Nonestab
18) CR PL HEX SOC SCREW KEY 12 MM[90]()
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 12MM EVER EST /TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/JK/ BETA/VENUS/ MAKE AS PER IS:3082-MADE OF CHROME VANADIUM STEEL. PART NO. X4700711-V2.
C
Nonestab
19) NIC CROME PLATED RING SPA16X17[90]()
Specification : CROME PLATED RING SPANNER 16X17 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4735211 V2.
C
Nonestab
20) NIC CROME PLATED RING SPA12X13[90]()
Specification : CROME PLATED RING SPANNER 12X13 MM EVEREST/TAAPARIA/GEDORE/J HALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700811-V2.
C
Nonestab
21) DE SPANNER SAE 5 by 8 inch X 9 by 16 inch[90]()
Specification : CHROME PLATED - DE SPANNER SAE 5/8" X 9/16" (A/F S1 - 0.629" / 0.633" X S2 - 0.566" / 0.570"), OVERALL LENGTH 150MM MIN. MAKE - EVEREST/TAPARIA/AMBIKA TOOLS/JHALANI EXPERT/JK/BETA /GEDORE/JHALANI/VENUS/ , MADE OF CHROME VANADIUM STEEL,OTH
Specification : CROME PLATED SCREW DRIVER 12"(300 mm)X2.0mm X13 mm EVEREST/T AAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/JHALANI EXPE RT/VENUS MAKE AS PER IS:844 (PART-II) MADE OF CHROME VANADIUM STEEL.
C
Nonestab
25) CR PLATED SCREW DRIVER PHILIPS[90]()
Specification : CROME PLATED SCREW DRIVER PHILIPS 100LG 6 DIA TIP NO-2 EVEREST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS/JHALANI/JK/BETA/ JHALANI EXPERT MAKE MADE OF CROME VANADIUM STEEL.
C
Nonestab
26) CR PL BALL PEIN HAMMER160Z by 500[90]()
Specification : BALL PEIN HAMMER 160Z/500 GMS EVEREST/ TAAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/VENUS/ JHALANI EXPORT MAKE AS PER IS:841 MADE OF CHROME VANADIUM STEEL.PART NO.F4730200-V1.
C
Nonestab
27) VEHICLE LOG BOOK 135MM X 200MM[90]()
Specification : VEHICLE LOG BOOK SIZE 135MM X 200MM (75 GSM THICK) WITH 100 PAGES ON THE BOTH THE SIDE PRINTED (BLACK & WHITE) WITH HARD COVER (LAMINATED).
C
Nonestab
28) USERS HAND BOOK FOR STALLION[90]()
Specification : USER'S HAND BOOK FOR STALLION USER'S HAND BOOK FOR STALLION 4X4 MK-IV(BS-III) H-SERIES ENG INE WITH INLINE FIP IN ENGLISH AS PER VFJ SPECN NO.VFJ SPEC/ 02/STLN/UHB/16/IFIP
C
Nonestab
29) LEVER TYPE GREASE GUN 500 CC[90]()
Specification : LEVER TYPE GREASE GUN (500 CC) DRG./PART NO.F-4735900 A
C
Nonestab
30) BKT REVERSE BEEPER[90]()
Specification : BKT. REVERSE BEEPER, PART NO./DRG NO. F7195914 A
C
Nonestab
31) Paint Primer Red Oxide for Stallion vehicle[90]()
Specification : As per specification / drg.
C
Nonestab
32) Paint Signal Red Colour 537[90]()
Specification : As per specification / drg.
C
Nonestab
33) Paint Black[90]()
Specification : AS per specification / drg
C
Nonestab
34) HYDRAULIC JACK[90]()
Specification : HYDRAULIC JACK DRG./PART NO.X-7451300-V3A-1-01-CV3NO-38
2) Three Layer Water Proof Breathable Fabric Dual Shade OG/White 118 cm()
As Per Appendix A of Prov. Specification No. IND/TC/4587 (C) And Annexure B Attached
R
Established
Category : DDP
Grade : I
Size :
M
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabric Nylon Knitted Aluminsed 100cm[21]()
Specification : DMSRDE/TEX-2/93/2
R
Estab
2) Three Layer Water Proof Breathable Fabric Dual Shade OG/White 118 cm[21]()
Specification : As per specification & Requirement
R
Estab
3) FABRIC NYLON 75 GSM WHITE PU COATED 152 CMS (MINIMUM)[21]()
Specification : IND/TC/0157 FIRM TRADE MARK IN ABBREVIATED FORM IN SMALLEST POSSIBLE LETTER TO BE PRINTED ON THE UNCOATED SIDE OF THE FABRIC ALONGSELVEDGE AT AN INTERVAL OF ONE METER. THE HEIGHT OF LETTERSHOULD NOT EXCEED 8MM. DARK/BRIGHT COLOUR TO BE AVO
R
Nonestab
Category : DDP
Grade : I
Size :
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) PU Coated Nylon Fabric 105 gms/ 75 gms (white)()
Specification : FABRIC POLYESTER WHITE (WIND CHEATER) 115 GSM WIDTH 150CM (MIN.) PANTONE SHADE NO. 11-0602 TPX
SPECIFICATION:- AS PER APPENDIX 'A' OF PROVISIONAL SPECIFICATION N. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6
R
Estab
2) OUTER SHELL FABRIC OUTER JACKET NYLON 95 GSM LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE WIDTH 150CM MIN PANTONE SHADE NO 19 0511 TPX[21]()
Specification : OUTER SHELL FABRIC (OUTER JACKET) NYLON, LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE, 95 GSM, WIDTH 150CM (MIN.) PANTONE SHADE NO. - 19-0511 TPX.
SPECIFICATION:- AS PER APPENDIX 'B' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT
R
Estab
Category :
Grade : Grade III
Size :
M
1Gun Carriage Factory
Name
Specification
Use
Status
1) Multi Spectral camouflage Equipment to Art No 1155287D[90]()
Specification : MULTI SPECTRAL CAMOUFLAGE EQUIPMENT TO ART.NO.1155287D
COMPRISING OF FOLLOWING ITEMS:-(1)MSCN"PARASOL" OF DIA 2.2m
(OUTSIDE GREEN PRINTED),QTY-10NOS(2)MSCN PARASOL OF DIA 2.2m
(OUTSIDE DESERT PRINTED),Q
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) PU Coated Nylon Fabric in Camouflage Design 150 cm Excluding Selvedges[21]()
Specification : AS PER ENCLOSED SPECIFICATION
R
Nonestab
2) Camouflage Cloth Commercial Polyester 600 D PVC / PU Coated 150 CM Excluding Selvedges[21]()
Specification : AS PER ENCLOSED SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN[21]()
Specification : FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN.
SPECIFICATION:- JSS 8305-32-2003
R
Estab
Category :
Grade : Grade III
Size :
M
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9081008426 HEATING BLANKET FOR DHANUSH TO DOCUMENT NO GCF 50 41169[90]()
Specification : HEATING BLANKET FOR 'DHANUSH' TO DOCUMENT NO.GCF/50/41169.
Specification : Portable Nitrogen Purging Kit as per Drg. CWC-252/39 (02 sheets)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) OLED WITH DRIVER BOARD RESOLUTION GREATERTHAN OR EQUAL TO 640 X 480 COLOURED B W[15]()
Specification : OLED WITH DRIVER BOARD,RESOLUTION GREATERTHAN OR EQUAL TO 640 X 480,COLOURED/(B/W), PIXEL SIZELESS THAN OR EQUAL TO 15 MICRON,OPERATINGTEMPERATURE RANGE GREATER THAN OR EQUAL TO(-20 DEGREE CELSIUS TO +50 DEGREE CELSIUS),ANALOG INPUT,POWER
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) PCB POWER SUPPLY CARD AS PER ATTACHED SPECIFICATION 27[15]()
Specification : PCB POWER SUPPLY CARD AS PER ATTACHED SPECIFICATION 27
C
Nonestab
2) PCB FOR PNV MONOCULAR[74]()
Specification : PCB FOR PNV MONOCULAR(TWO STAGE REGULATED POWER SUPPLY WITH LOW BATTERY VOLTAGE INDICATION OUTPUT POINTS), DETAILS AS PER DRAWING NO.: MCT-3497 NOTE: SAMPLE MUST BE PROVIDED BEFORE BULK SUPPLY.
C
Nonestab
3) CHARGING CABLE 12V DC[15]()
Specification : CHARGING CABLE 12V DC CONSISTING OF WIRE 3.5 SQ.MM, 1 METER LENGTH(RED & BLACK),2 NOS.OF CROCODILE CLIPS (RED & BLACK INDICATION) & 12V DC JACK. (SAMPLE MUST BE APPROVED BEFORE BULK SUPPLY)
C
Nonestab
4) DC ADOPTER FOR BATTERY CHARGER FOR VARIOUS SPECIFICATION[74]()
Specification : DC ADOPTER FOR BATTERY CHARGER 18650:- DC CONVERTER WITH INPUT CONNECTOR-CROCODILE CLIPS FOR DIRECT ATTACHMENT TO BATTERY,INPUT VOLTAGE-12-36 VOLT DC,INPUT WIRE LENGTH-1 METER, OUTPUT CONNECTOR- MICRO USB, OUTPUT ELECTRICAL SPECS-5 VOLT D
1) 6356000017 LLDPE PACKAGE BOX FOR INFLUENCE MINE MK II EMPTY ASSEMBLY TO ARDE DRG NO 9707 00 04 00 00 000 00TA AS PER QAP NO NFM IMMK II PKG 02[63]()
Specification : LLDPE PACKAGE BOX FOR INFLUENCE MINE MK-II (EMPTY ASSEMBLY)TO ARDE DRG. NO. 9707 00 04 00 00 000 00TA AS PER QAP NO.NFM/IMMK-II/PKG/02
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) CASE CARRYING SNV MCT 2015 3 COMPLETE[74]()
Specification : CASE CARRYING SNV 5.56 MM LMG(INSAS) TO DRG. NO. MCT-2015/3 , COMPLETE,CASE CARRYING SNV 5.56MM LMG(INSAS) 101A TO DRG.NO.:MCT-2015/3 (COMPLETE) CONSISTING OF MCT-1369,MCT-1370,MCT-1375, MCT-1376,MCT-1380,MCT-1617/1,MCT-1636/1, MCT-1637/1
C
Nonestab
2) Case Carrying FRP IRDE 2610[74]()
Specification : Case Carrying FRP IRDE 2610
C
Nonestab
3) CASE CARRYING FRP MCT 1678 2[74]()
Specification : CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56 MM RIFLE AS PER DRG. NO. MCT 1678 2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PACKAGE TO DRG NO 08040002000000000 LF 9911358292[99]()
Specification : PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) HARD CARRYING CASE AS PER SPEC 13[74]()
Specification : HARD CARRYING CASE AS PER SPEC 13
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141500001 MINE DRILL APERS M14 WITH FZ INTGL E ASS PKD IN APPD PKG 5RG ITX 14GA DC 36985A 14 10 04 SPCN CQA A 1828 C DC 37095A 27 2 07 PKD AMN 70B L DRG ISV 221GA DC36250A 4 3 97SPCN PKGIA948 A K DC 36868A 29 11 02 MKG PTG CRATE 2A BY LAT DRGORCI[61]()
Specification : MINE DRILL APERS M14 WITH FZ INTGL(E) ASS.& PKD IN APPD.PKG.5RG ITX 14GA DC 36985A/14-10-04,SPCN.CQA(A)1828(C) DC 37095A/27-2-07.PKD AMN 70B/L DRG ISV 221GA DC36250A/4-3-97SPCN PKGIA948(A,K)DC 36868A/29-11-02,MKG.& PTG.CRATE 2A BY LAT.DRG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) TRANSIT CASE TO DRG NO. TEND 1937* FOR 40mm MGL[70]()
Specification : AS PER DRG OF " TRANSIT CASE TO DRG NO. TEND 1937* FOR 40mm MGL
"
E
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A[65]()
Specification : SPECN.NO. CQA(A) 2804
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) PLASTIC PACKAGE FOR PRE FRAG 100 120 KG BOMB LF 9911358232
Description : PLASTIC PACKAGE FOR PRE FRAG 100 120 KG BOMB LF 9911358232()
Specification : PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY'2014.
P
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) OPTOMECHANICAL ASSEMBLY SPEC 41[74]()
Specification : OPTOMECHANICAL ASSEMBLY SPEC41
C
Nonestab
2) HOLOGRAPHIC SIGHT ASSEMBLY AS PER SPEC NO 43[74]()
Specification : HOLOGRAPHIC SIGHT ASSEMBLY AS PER SPEC NO. 43
E
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) CASE CARRYING MCT 1925[74]()
Specification : CASE CARRYING TO DRG. NO. MCT-1925/3 (COMPLETE) CONSISTING OF DRG. NOS. MCT-1349/1, MCT-1350/1, MCT-1369, MCT-1456/1, MCT-1458/1, MCT-1916/2, MCT-1917/2, MCT-2213/1, MCT-2212/1 CQA(I) INSTRUCTION SHEET NO. IS/INF/15(A).
C
Nonestab
2) CASE CARRYINGFOR GNVP[74]()
Specification : CASE CARRYING AS PER DRG.NO.: CWC-250 FOR GNVP M1
C
Nonestab
3) CASE CARRYING FOR PNS RIFLE LMG[74]()
Specification : CASE CARRYING AS PER DRG.NO.CWC-233 FOR PNS 5.56MM RIFLE/LMG
C
Nonestab
4) CASE CARRYING FRP FOR MODIFIED PNS 84 MM CARL GUSTAV[74]()
Specification : CASE CARRYING F.R.P AS PER DRG. NO.CWC-235 FOR MODIFIED PNS 84 MM CARL GUSTAV
C
Nonestab
5) CASE CARRYING FOR PNV MONOCULAR[74]()
Specification : CASE CARRYING AS PER DRG.NO.CWC-254 FOR PNV MONOCULAR
C
Nonestab
6) CASE CARRYING TELESCOPE SIGHTING LMG INSAS[74]()
Specification : CASE CARRYING TELESCOPE SIGHTING 5.56 MM LMG (INSAS) 101A, MCT-1452/2 CONSIST OF (MCT-1369,MCT-1455/1, MCT-1458/1,MCT-1454/4,MCT-1350/1,MCT-1453/3, MCT-1456/1,MCT-1451/6,MCT-1349/1)
C
Nonestab
7) CASE CARRYING CWC 245[00]()
Specification : CASE CARRYING DRG.NO.CWC-245
C
Nonestab
8) CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE RIFLE INSAS[74]()
Specification : CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1
C
Nonestab
9) FRP CASE CARRYING[74]()
Specification : FRP CASE CARRYING TO DRG NO. MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)
2) Trade Fabrication of Jersey Woollen Dark OG/BG Stitching()
Trade Fabrication of Jersey Woollen Dark OG/BG Stitching (i) Jersey Cut Components will be provided by OCFS along with Reinforcement Pieces and other Garniture.(ii) Jersey will be Stitched as per provided pattern /scale OCFS. (iii) Other parameters and
C
Non Established
3) Fabrication of Coat ECC Imp. Ver.()
FABRICATION OF COAT ECC IMP. VR.) AS PER SPECIFICATION NO. IND/TC/4587(C) AND APPROVED SAMPLE. As per relevant clause of specification. As per relevant clause of specification -OCF SHAHJAHANPUR
E
Non Established
Category : DP
Grade : II
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Coat Combat Disruptive, Detachable with Indian Army Logo[21]()
Specification : S/2594/CCD Army Logo/TC-15 (a)
R
Nonestab
2) Fabrication of Cap Balaclava OG (Imp.)[21]()
Specification : S/5094/TC-1(b)/CAP BAL OG(IMP)
R
Estab
Category : DP
Grade : II
Size :
338
Alloy Steel Company
PLOT NO - 92,POCKET -M,SECTOR 2 DSIIDC INDUSTRIAL AREA BAWANA, DELHI 110039 PLOT NO - 92,POCKET -M,SECTOR 2 DSIIDC INDUSTRIAL AREA BAWANA, DELHI 110039 DELHI Delhi
PIN1 : 110039
Phone No. : 41615208 GSTIN :
07ABFPS3819K1ZA
Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM
R
Nonestab
5) Striker to Drg no NAD 7606 by 2 for Striker Mechanism in finished condition[70]()
Specification : Striker to Drg. no. NAD 7606/2 DT. 03 Sep 13 for Striker Mechanism in finished condition. ARD no.2572, DT.26.07.2019.
C
Nonestab
6) PIN FOR PIN SAFETY IN FINISH CONDITION FOR STRIKER MECHANISM[70]()
Specification : PIN FOR PIN SAFETY IN FINISH CONDITION AS PER DRAWING NO NAD 7606/1A OF STRIKER MECHANISM NO.8 MK-1.
C
Nonestab
7) PIN HINGE FOR STRIKER MECHANISM[70]()
Specification : PIN HINGE DRAWING NO. -NAD-7606/3 FOR STRIKER MECHANISM NO.8 MK-I IN FINISHED CONDITION
C
Nonestab
8) SLEEVE DRAWING FOR STRIKER MECHANISM[70]()
Specification : SLEEVE DRAWING NO. NAD- 7606/7 FOR STRIKER MECHANISM NO. 8 MK-1 IN FINISH CONDITION.
C
Nonestab
9) HOUSING TRIGGER OF LMG BELT FED[70]()
Specification : HOUSING TRIGGER OF LMG 7.62MM BELT FED, DRG NO.SK-5817.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9069112491 GUARD BALANCING GEAR LEFT 5050408 2[90]()
Specification : 9069112491 GUARD BALANCING GEAR LEFT 5050408-2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) ADAPTOR FUNNEL TO DRG NO 4933 000052[90]()
Specification : ADAPTOR FUNNEL TO DRG. NO. 4933-000052
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) RING TO DRG NO 6095845[90]()
Specification : RING TO DRG. NO. 6095845
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) BRACKET TO DRG No 1015 000327[90]()
Specification : BRACKET TO DRG No 1015 000327
C
Nonestab
2) SPACER PLATE TO DRG NO 5365 001462[90]()
Specification : SPACER PLATE TO DRG NO 5365 001462
C
Nonestab
3) Link to DS CAT No 1015 000772[90]()
Specification : Link to DS CAT No 1015 000772
C
Nonestab
4) LEVER TO DRG NO BOF 6112228[90]()
Specification : LEVER TO DRG NO BOF 6112228
C
Nonestab
5) LEVER LEFT TO DRG NO BOF 5047789[90]()
Specification : LEVER LEFT TO DRG NO BOF 5047789
C
Nonestab
6) LEVER SAFETY PIN TO PT BOF 6151795[90]()
Specification : LEVER SAFETY PIN TO PT BOF 6151795
C
Nonestab
7) PLUNGER LOCKING IAN 321SA[90]()
Specification : PLUNGER LOCKING IAN 321SA
C
Nonestab
8) PLUNGER TO DRG NO BOF 5065285[90]()
Specification : PLUNGER TO DRG NO BOF 5065285
C
Nonestab
9) PLUNGER TO PART NO BOF 6105849[90]()
Specification : PLUNGER TO PART NO BOF 6105849
C
Nonestab
10) SPRING FOR AXE TO DRG NO 6135336[90]()
Specification : SPRING FOR AXE TO DRG NO 6135336
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9069111495 HANDLE FOLDING WITH SHOP[90]()
Specification : 9069111495 HANDLE FOLDING WITH SHOP M2 IAN61SA
C
Nonestab
2) 9069112696 HANDLE OPERATING TO PT BOF 6111442[90]()
Specification : 9069112696 HANDLE OPERATING TO PT BOF 6111442
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Sling Assembly for 7POINT62mm Rifle[70]()
Specification : As per Drawing
C
Nonestab
2) FIRING PIN AS PER DRG No K 2015 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL
C
Nonestab
3) SELECTOR LEVER AS PER DRGNOK 2074 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL
C
Nonestab
4) SCREW DRIVER AS PER DRG NO K 9006 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 9006 WITH FIRMS MATERIAL
E
Nonestab
5) SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL[70]()
Specification : SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL
C
Nonestab
6) SUPPLY OF HAMMER AS PER DRG NO K 2061 STR WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STR WITH FIRMS MATERIAL
C
Nonestab
7) WASHER SPRING SINGLE COIL TYPE B STEEL ZINC PLATED NOMINAL SIZE 6MM CAT PT NO G1 5310 001434 SPECN IS 3063 1972 and SS NOCIGS SS 173D THICKNESS OF ZINC PLATING TO IS 1573 1970 SERVICE CONDN NO 1 GRFE ZN 5 CHROME PASSIVATED[17]()
Specification : AS PER DRG
C
Nonestab
8) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG NO K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Nonestab
9) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Nonestab
10) BUTT FRAME ASSY AS PER DRG NO K 6006 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.K 6006
WITH FIRM’S MATERIAL
C
Nonestab
11) SUPPLY OF STUD AS PER DRG NO K 1302 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.K-1302 WITH FIRMS MATERIAL
C
Nonestab
12) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()
Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE
C
Nonestab
13) BULLET GUIDE AS PER DRG No TEND 2570 STR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : BULLET GUIDE AS PER DRG No TEND 2570 STR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
14) BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR4[70]()
Specification : BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR4
C
Nonestab
15) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR
C
Nonestab
16) 20mm Bolt Assembly to Drg No 44P03000 required for AMR[20]()
Specification : 20mm Bolt Assembly to Drg. No. 44P 03000* required for AMR (LF. No. 2028423000),
C
Nonestab
17) 14 5 mm Bolt Assembly[70]()
Specification : 14.5 mm Bolt Assembly as per drawing 44P 14000
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6454000054 WASHER TO ERDL DRG 1287 DET NO 2[64]()
Specification : HEMRL/PYRO/PS/207(C)
C
Nonestab
2) 6331800103 WASHER AL DRG PART NO QX 176[63]()
Specification : WASHER (ALUMINIUM) TO DRG. PART NO. QX-176 DC-35781-A.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) SEATING FOR BODY TO DRG. NO. BOF-6109674[90]()
Specification : SEATING FOR BODY TO DRG. NO. BOF-6109674
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) SLEEVE TO DRG NO BOF 6151786[90]()
Specification : SLEEVE TO DRG NO BOF 6151786
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) VALVE SEATING TO DRG NO BOF 6115657[90]()
Specification : VALVE SEATING TO DRG NO BOF-6115657
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9069112258 HEAD TO DRG NO 5048447[90]()
Specification : 9069112258 HEAD TO DRG NO 5048447
C
Nonestab
2) 9069112603 HEAD TO DRG NO BOF 5073586[90]()
Specification : 9069112603 HEAD TO DRG NO BOF 5073586
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) HOUSING TO DRG. NO. BOF-3012784[90]()
Specification : HOUSING TO DRG. NO. BOF-3012784
C
Nonestab
2) HOUSING ARAMATURE SOFT IRON 50 M 00 D DIA 9 MM THICK TO DRG NO 5047925[90]()
Specification : HOUSING ARAMATURE SOFT IRON 50 M 00/ D, DIA 9 MM THICK TO DRG. NO. 5047925
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Opto Electronic Factory
Name
Specification
Use
Status
1) TIE ROD ASSY TO DRG NO BSH6366037 LF 7432111014[74]()
Specification : TIE ROD ASSY TO DRG NO BSH6366037 (LF 7432111014)
C
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) EXTRACTOR TO DRG NO29P 0020STAR2 required for 0POINT315 Sporting Rifle[03]()
Specification : AS PER DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Opto Electronic Factory
Name
Specification
Use
Status
1) STEM FINISHED TO DRG NO BSH8126170 LF 7434011004[74]()
Specification : STEM FINISHED TO DRG NO BSH8126170 (LF 7434011004)
Specification : PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO .5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE
C
Nonestab
6) Nut Castellated Hexagon[70]()
Specification : NUT CASTELLATED HEXAGON AS PER DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796 FOR DEVICE FIRING IB FOR MINE
C
Nonestab
7) Steel Forged Trigger for LMG[04]()
Specification : STEEL FORGED TRIGGER TO DRG NO.SK-5294*D.A. 11/2020.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) PIN LOCKING PIN FIRING IN FINISHED CONDITION DS CAT NO 5315 010101[70]()
Specification : PIN LOCKING PIN FIRING IN FINISHED CONDITION TO DRG.NO-ARDE/SK-3143/78.DC(1)26929-SA.DT-03.09.2016 DS CAT NO 5315-010101.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Pin grooved Headed for Hinge cover for Carbine 5 56[70]()
Specification : PIN GROOVED HEADED FOR HINGE COVER TO DRG. NO.ARDE/SK- 3143/29.DS CAT NO.5315-009188 DC(I) NO.26927-SA DT.02.09.16
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Rod Rear Spring Recoil for JVPC[70]()
Specification : Rod Rear Spring Recoil for JVPC 5.56 DRG No. 0204 03 04 00 06 002 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) TRIGGER saf matl[70]()
Specification : TRIGGER IN FINISH CONDITION AS PER DRG.NO.CQA(I)393/26 WITH-OUT ANODIZE PROTECTIVE FINISH FOR FIRING DEVICE, MATERIAL TO BE SUPPLIED BY SAF THROUGH LF NO.0142032535 AGAINST BANK GUARANTEE CAT-/PT NO.1005-007703.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Rear Feed Pawl FOR MAG[70]()
Specification : Rear Feed Pawl to DS CAT no. 1005-006638 DC(I) NO. 25321-SA, DT. 08-04-02 in finished condition
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) SPLIT PIN SOLID HALF LINK PART NO B 32 EC[70]()
1) SASD ASSEMBLY EMPTY FOR DPCIM WARHEAD AS PER DRAWING NO 86030310010000000DD
Description : SASD ASSEMBLY EMPTY FOR DPCIM WARHEAD AS PER DRAWING NO 86030310010000000DD()
Specification : As per QAP
C
Estab
2) SAM BODY FOR DPICM WARHEAD AS PER ARDE DRAWING NO 86030310010100100DB
Description : SAM BODY FOR DPICM WARHEAD AS PER ARDE DRAWING NO 86030310010100100DB()
Specification : CARTG.ELECTRIC OPERATING FIRE EXTENGUISHER 2PIN NO.1MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-1-2135.AND SPECN.NO. ARDE/SPCEN/124.FOR AIR FORCE WITH ECCENTIRICITY 0.55MM (INCLUSIVE EMPTY & FILLED PROOF).
R
Nonestab
Category : p
Grade : 3
Size :
S
340
Rahul Electroplaters
S/26, Parvati Industrial Area Pune Satara RoaD PUNE MAHARASHTRA
PIN1 : 411009
Phone No. : 9822338002 GSTIN :
27ACEPS9172M1ZT
1) CONVERSION OF FLOW FORMED MOTOR TUBE INTO ZINC PLATED MOTOR TUBE FOR PINAKA MK 1
Description : CONVERSION OF FLOW FORMED MOTOR TUBE INTO ZINC PLATED MOTOR TUBE FOR PINAKA MK 1()
Specification : CONVERSION OF FLOW FORMED MOTOR TUBE INTO ZINC PLATED MOTOR TUBE FOR PINAKA MK-1 (E) AS PER ARDE DRG NO. 1905 01 01 00 02 001 00 DA
C
Estab
Category : p
Grade : 1
Size :
O
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) CONVERSION OF FLOW FORMED MOTOR TUBE WITHOUT ZINC PLATING INTO ZINC PLATED MOTOR TUBE AS PER ARDE DRG NO 1102 01 01 00 01 0001 00DA
Description : CONVERSION OF FLOW FORMED MOTOR TUBE WITHOUT ZINC PLATING INTO ZINC PLATED MOTOR TUBE AS PER ARDE DRG NO 1102 01 01 00 01 0001 00DA()
Specification : CONVERSION OF FLOW FORMED MOTOR TUBE (WITHOUT ZINC PLATING) INTO ZINC PLATED MOTOR TUBE AS PER ARDE DRG.NO. 1102 01 01 00 01 0001 00DA
