1) O RING 78 X 2 PART NO 6409795 LF 2013999909[20]()
Specification : O-RING 78 X 2 PART NO.6409795 DRG.NO.TRD-1-1-2960
R
Nonestab
2) O RING 37 X 2 4 PART NO 6414441 LF 2013999924[20]()
Specification : O-RING 37 X 2.4 PART NO.6414441 DRG.NO.TRD-1-1-2978
R
Nonestab
3) O RING 26 X 1 2 PART NO 6439353 LF 2013999908[20]()
Specification : O-RING 26 X 1.2 PART NO.6439353 DRG.NO.TRD-1-1-2959
R
Nonestab
4) O RING 67X2 5 PART NO 6413251 LF 2013999907[20]()
Specification : O-RING 67 X 2.5 PART NO.6413251 DRG.NO.TRD-1-1-2958
R
Nonestab
5) O RING 28 X 2 6 PART NO 6413250 LF 2013999906[20]()
Specification : O-RING 28X2.6 PART NO.6413250 DRG.NO.TRD-1-1-2957
R
Nonestab
6) O RING 25 1X1 6 PART NO 6416337 LF 2013999903[20]()
Specification : O-RING 25.1X1.6 PART NO.6416337 DRG.NO.TRD-1-1-2954
R
Nonestab
7) O RING 30X2 PART NO 6413212 LF 2013999901[20]()
Specification : O-RING 30X2 PART NO.6413212 DRG.NO.TRD-1-1-2953
R
Nonestab
8) O RING 71 X 1 65 PART NO 6413243 LF 2013999913[20]()
Specification : O-RING 71 X 1.65 PART NO.6413243 DRG.NO.TRD-1-1-2962
R
Nonestab
9) O RING 71 X 1 8 PART NO 6413211 LF 2013999912[20]()
Specification : O-RING 71 X 1.8 PART NO.6413211 DRG.NO.TRD-1-1-2961
R
Nonestab
10) O RING 71 X 1 6 PART NO 6413232 LF 2013999911[20]()
Specification : O-RING 71 X 1.6 PART NO.6413232 DRG.NO.TRD-1-1-2956
R
Nonestab
11) O RING 75 5 X 2 4 PART NO 6413411 LF 2013999922[20]()
Specification : O-RING 75.5 X 2.4 PART NO.6413411 DRG.NO.TRD-1-1-2977
R
Nonestab
12) O RING 76 X 2 PART NO 450001307 LF 2013999919[20]()
Specification : O-RING 76 X 2 PART NO.450001307 DRG.NO.TRD-1-1-2974
R
Nonestab
13) O RING 67 X 2 PART NO 6414120 LF 2013999921[20]()
Specification : O-RING 67 X 2 PART NO.6414120 DRG.NO.TRD-1-1-2973
R
Nonestab
14) O RING 29 2 X 2 PART NO 6413414 LF 2013999920[20]()
Specification : O-RING 29.2 X 2 PART NO.6413414 DRG.NO.TRD-1-1-2972
R
Nonestab
15) O RING 5 X 1 PART NO 6414174 LF 2013999916[20]()
Specification : O-RING 5 X 1 PART NO.6414174 DRG.NO.TRD-1-1-2968
R
Nonestab
16) O RING 22 X 1 PART NO 6413419 LF 2013999915[20]()
Specification : O-RING 22 X 1 PART NO.6413419 DRG.NO.TRD-1-1-2967
R
Nonestab
17) O RING 61 X 1 6 PART NO 6413412 LF 2013999914[20]()
Specification : O-RING 61 X 1.6 PART NO.6413412 DRG.NO.TRD-1-1-2966
R
Nonestab
18) PRIMER GASKET PART NO 6409794 LF 2013999910[20]()
Specification : PRIMER GASKET PART NO.6409794 TO OEM DRG.NO.304083636/ TRD.DRG.NO.1.2.2370
R
Nonestab
19) O RING 29 1X 1 6 PART NO 6416525 LF 2013999904[20]()
Specification : O-RING 29.1X 1.6 PART NO.6416525 DRG.NO.TRD-1-1-2955
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Grey Iron Foundry
Name
Specification
Use
Status
1) RUBBER GASKET. RUBBER GASKET TO DRG NO. OFB/SK/712. REQUIRED FOR AMMUNITION BOX H2A. DRG. NO. ISV-1727[14]()
Specification : RUBBER GASKET.
RUBBER GASKET TO DRG NO. OFB/SK/712.
REQUIRED FOR AMMUNITION BOX H2A.
DRG. NO. ISV-1727
C
Nonestab
Category : dp
Grade : Grade II
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) PROTECTIVE RING AS PER OFC DRG. NO. SK-8237 FOR 155MM[65]()
Specification : PROTECTIVE RING AS PER OFC DRG. NO. SK-8237 FOR 155MM
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Kanpur
[ENR Registration]
Name
Specification
Use
Status
1) PROTECTIVE RING BANDS SK 7723 A
Description : PROTECTIVE RING BANDS SK 7723 A()
Specification : PROTECTIVE RING BANDS SK 7723 A
P
Estab
2) PROTECTIVE RING TO DRG. NO. SK-7844/A
Description : PROTECTIVE RING TO DRG. NO. SK-7844/A()
Specification : PROTECTIVE RING TO DRG. NO. SK-7844/A
P
Estab
3) PROTECTIVE RING BANDS SK 7723 1 A
Description : PROTECTIVE RING BANDS SK 7723 1 A()
Specification : PROTECTIVE RING BANDS SK 7723-1 -A
P
Estab
Category : p
Grade : 2
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) COPPER BAND PROTECTOR AS PER DRG NO SM 285 BMATERIAL POLYTHENE HIGH DENSITY TYPE 2
Description : COPPER BAND PROTECTOR AS PER DRG NO SM 285 BMATERIAL POLYTHENE HIGH DENSITY TYPE 2()
Specification : COPPER BAND PROTECTOR AS PER DRG. NO. SM-285 B. MATERIAL POLYTHENE HIGH DENSITY TYPE - 2
1) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB[70]()
Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
C
Nonestab
2) PIN STRAIGHT HEADED OF GRIP LEFT ASSY FOR FIRING DEVICE IB FOR MINE[70]()
Specification : PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO.5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE
C
Nonestab
3) SCREW EXTERNALLY RELEIVED BODY FOR FIRING DEVICE[70]()
Specification : SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659
C
Nonestab
4) SCREW SPECIAL FOR FIRING DEVICE IB[70]()
Specification : SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB
C
Nonestab
5) SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB[70]()
Specification : SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB[70]()
Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
C
Nonestab
2) SCREW SPECIAL FOR FIRING DEVICE IB[70]()
Specification : SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB
C
Nonestab
3) SCREW SPECIAL AS PER DRG NO CQA I 393 7 CAT PT NO 5305 016656 FOR FIRING DEVICE IB[70]()
Specification : SCREW SPECIAL AS PER DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656 FOR DEVICE FIRING IB
C
Nonestab
4) SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB[70]()
Specification : SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
C
Nonestab
5) Nut Castellated Hexagon[70]()
Specification : NUT CASTELLATED HEXAGON AS PER DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796 FOR DEVICE FIRING IB FOR MINE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG NO K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SELECTOR LEVER AS PER DRGNOK 2074 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
2) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Nonestab
3) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Nonestab
2) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509STR FOR K1202STR[70]()
Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509STR FOR K1202STR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG NO K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Nonestab
2) SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL
C
Nonestab
3) ROD HANDLE AS PER DRAWING 33P 2021 IN FULLY FINISHED WITH FIRMS MATERIAL[70]()
Specification : ROD HANDLE AS PER DRAWING 33P 2021 IN FULLY FINISHED WITH FIRMS MATERIAL
C
Nonestab
4) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
5) Manufacturing and supply of Rear Cross blank DRG NUMBER TEND 2655[70]()
Specification : MANUFACTURING AND SUPPLY OF REAR CROSS BLANK DRAWING NO. TEND 2655 WITH FIRM'S MATERIAL REQUIRED FOR MSL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) PIN AXIS DEPRESSION LEVER TO PART NO BOF 6097384[90]()
Specification : PIN AXIS DEPRESSION LEVER TO PART NO BOF-6097384
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) BUSH TO DRG NO 5060095 5060095 Y[90]()
Specification : BUSH TO DRG NO 5060095 5060095 Y
C
Nonestab
2) BUSH BOF 6164802[90]()
Specification : BUSH BOF 6164802
C
Nonestab
3) BUSH BOF 6104225 Y[90]()
Specification : BUSH BOF 6104225 Y
C
Nonestab
4) PIN TO DS CAT NO 5315 001004[90]()
Specification : PIN TO DS CAT NO 5315 001004
C
Nonestab
5) PIN AXIS DEPRESSION LEVER BOF 6097384[90]()
Specification : PIN AXIS DEPRESSION LEVER BOF 6097384
C
Nonestab
6) PLATE LOCKING PISTON JOINT PIN TO PART NO BOF 6108932[90]()
Specification : PLATE LOCKING PISTON JOINT PIN TO PART NO BOF 6108932
C
Nonestab
7) 9080081467 PIN SHOULDER HEADED TO DRG NO 5315 001003[90]()
Specification : PIN SHOULDER HEADED TO DRG NO 5315 001003
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BODY COVER WITH INTEGRAL PICATINY RAIL FOR LMG BELT FED[70]()
Specification : BODY COVER WITH INTEGRAL PICATINY RAIL LMG 7.62MM BELT FED AS PER DRG. NO. ARDE/SK/108/005
C
Nonestab
2) PIN DISASSEMBLY FOR REVOLVER SIDE SWING[70]()
Specification : PIN DISASSEMBLY FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-06/4 SW.
C
Nonestab
3) PIN HAMMER DOG FOR REVOLVER SIDE SWING[70]()
Specification : PIN HAMMER DOG FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-05/5 SW.
C
Nonestab
4) WASHER EJECTOR ROD FOR REVOLVER SIDE SWING[70]()
Specification : WASHER EJECTOR ROD FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-04/7 SW.
C
Nonestab
5) Body Finished Through IC for Revolver Side Swing[70]()
Specification : Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) PEGS NIGHT LINE MG MK I[70]()
Specification : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138.[71]()
Specification : BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138. REQD FOR 155MMM FH GUN.
R
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) AXIS PIN AS PER DRG. NO.5174739[71]()
Specification : AXIS PIN AS PER DRG. NO.5174739 FOR 155 MM FH GUN.
R
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) PRE MACHINING ACTUATING AXLE SHAFT DRG.NO.4077843[71]()
Specification : PRE MACHINING ACTUATING AXLE SHAFT DRG.NO.4077843 MATERIAL BS:970 PT 1983 GRADE 835 M30 COMPONENT OF 155 FH BO
FORS.
R
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32.[72]()
Specification : FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32.
R
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) F/M CAM CONTROL HANDLE[71]()
Specification : F/M CAM CONTROL HANDLE
S
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.[71]()
Specification : EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.
R
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH COMPONENT OF LOCKING PLATE[76]()
Specification : FINISH COMPONENT OF LOCKING PLATE AS PER DRG.NO.161-1490 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH COMPONENT OF TOP SLIDE 176 1118[76]()
Specification : FINISH COMPONENT OF TOP SLIDE AS PER DRG.NO.176-1118 FOR SHARANG ORD.
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) CAP FOR SHARANG 161 473[76]()
Specification : CAP AS PER DRG NO-161-473 FOR SHARANG ORDNANCE
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) KEY AS PER DRG 161 480[76]()
Specification : KEY AS PER DRG.NO.161-480 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) PLUNGER AS PER DRG 161 463 FOR SHARANG[76]()
Specification : PLUNGER AS PER DRG 161-463 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) CAM CONTROL HANDLE[71]()
Specification : CAM CONTROL HANDLE
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.[71]()
Specification : EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.
R
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138.[71]()
Specification : BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138. REQD FOR 155MMM FH GUN.
R
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) COLLAR SHAFT AS PER DRG No 3040 003628[41]()
Specification : COLLAR SHAFT AS PER DRG No 3040 003628
C
Estab
2) PACKING NUT AS PER DRG No 4730 006960[41]()
Specification : PACKING NUT AS PER DRG No 4730 006960
C
Estab
3) SCREW AS PER DRG No 5305 003184[41]()
Specification : SCREW AS PER DRG No 5305 003184
C
Estab
4) PLUG AS PER DRG No 1015 000547[41]()
Specification : PLUG AS PER DRG No 1015 000547
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) AXIS PIN AS PER DRG. NO.5174739[71]()
Specification : AXIS PIN AS PER DRG. NO.5174739 FOR 155 MM FH GUN.
R
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32.[72]()
Specification : FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32.
R
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) HAMMER TO DRG. NO. 32-0601 MK-III[70]()
Specification : HAMMER TO DRG. NO. 32-0601 MK-III,MATERIAL BS 970 PT I 1983 GD:070 M-55(B.S 970 EN-9) ALT.MATERIAL: FROM I.C ROUTE I.C DRG NO.SK-5377R BS 3146 Pt.1-1974. TYPE CLASS-12 Gr.A.
R
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) LOCKING PIECE FOR SHARANG ORD[76]()
Specification : LOCKING PIECE AS PER DRG.NO.166-217
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FIXING PIN FOR SHARANG ORD[76]()
Specification : FIXING PIN AS PER DRG.NO.176-1212 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FIXING PIN 1185[76]()
Specification : FIXING PIN AS PER DRG.NO.176-1185 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) ADOPTER 161[76]()
Specification : ADOPTER AS PER DRG.NO.161-1500 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH COMPONENT OF TOP SLIDE 176 1118[76]()
Specification : FINISH COMPONENT OF TOP SLIDE AS PER DRG.NO.176-1118 FOR SHARANG ORD.
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) CAP FOR SHARANG 161 473[76]()
Specification : CAP AS PER DRG NO-161-473 FOR SHARANG ORDNANCE
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) KEY AS PER DRG 161 480[76]()
Specification : KEY AS PER DRG.NO.161-480 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH COMPONENT OF KEY 176 1104 FOR SHARANG[76]()
Specification : FINISH COMPONENT OF KEY 176 1104 FOR SHARANG FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) PLUNGER AS PER DRG 161 463 FOR SHARANG[76]()
Specification : PLUNGER AS PER DRG 161-463 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) CAM CONTROL HANDLE[71]()
Specification : CAM CONTROL HANDLE
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) COLLAR SHAFT AS PER DRG No 3040 003628[41]()
Specification : COLLAR SHAFT AS PER DRG No 3040 003628
C
Estab
2) PACKING NUT AS PER DRG No 4730 006960[41]()
Specification : PACKING NUT AS PER DRG No 4730 006960
C
Estab
3) SCREW AS PER DRG No 5305 003184[41]()
Specification : SCREW AS PER DRG No 5305 003184
C
Estab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BLANK FOR BODY COVER FOR MAG 7 62MM[01]()
Specification : BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G
C
Nonestab
2) FEED ARM FOR AIR VERSION for MAG[70]()
Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) OILER HAND NO1 MK1 MAG GUN[71]()
Specification : OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CATNO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Rod Rear Spring Recoil for JVPC[70]()
Specification : Rod Rear Spring Recoil for JVPC 5.56 DRG No. 0204 03 04 00 06 002 00DA
C
Nonestab
2) Barrel Extension Blank up to Stage V for JVPC[70]()
Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BARREL COVER ASSEMBLY FOR JVPC[70]()
Specification : BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MMDRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OFBARREL COVER MOULDING BUSH BARREL COVER,
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER[70]()
Specification : BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FOR JVPC[70]()
Specification : BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.5 6X30MM DRG NO. 0204-03-03-02-15-000-00DB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) LEVER PIN LOCKING IN FINISHED CONDITION[70]()
Specification : LEVER PIN LOCKING TO DRG.NO. CQA(SA)SK- 588/1 DC(I) NO. 26933-SA DT- 07.09.16 IN FINISHED CONDITION. DS CAT NO 1005-560293.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.[70]()
Specification : CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER[70]()
Specification : LEVER CAM DRG PH-1-3 IN FINISHED CONDITION. D.A. NO. 35/04 DT. 09-04-04
1) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143[04]()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BUTTON CATCH MAGAZINE FOR JVPC[70]()
Specification : BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-02-02-19-002-00DD
C
Nonestab
2) Rod Front Spring Recoil for JVPC[70]()
Specification : Rod Front Spring Recoil for JVPC 5.56MM DRG. No. 204-03-02-00-06-003-00DD
C
Nonestab
3) Guide Piece Magazine for JVPC[70]()
Specification : Guide Piece Magazine for JVPC ,Drg. No. 0204-03-02-18-29-003-00DB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) COVER for MAG[70]()
Specification : COVER TO DS CAT NO. 1005-000446 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) SIGHT REAR FOR MAG[70]()
Specification : SIGHT REAR FOR MAG 7.62MM TO DRG. NO. DS CAT NO. 1005-006621 DC(I) NO. 25317-SA DT- 03.04.2002 IN FINISHED CONDITION.
Specification : BODY HOUSING BLANK TO DRG NO. AKC-03/1M FOR CARBINE 5.56MM.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG[70]()
Specification : CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG
C
Nonestab
2) BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER[70]()
Specification : BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) CLIP for MAG[70]()
Specification : CLIP TO DS CAT NO. 5340-007354 DC NO. 27021-SA DT- 28.01.17 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Threaded Piston Extension for CQB DRG No 1901 01 01 00 03 002 00DC[70]()
1) ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001[70]()
Specification : ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm[70]()
Specification : AS PER DRG.no. 1005-000977
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016.[70]()
Specification : BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) PIN RIVETTING DS CAT NO. 5315-002018 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM . D C NO.25065-SA, DT: 10/07/2001[70]()
Specification : PIN RIVETTING DS CAT NO. 5315-002018 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM . D C NO.25065-SA, DT: 10/07/2001
P
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Trigger guard DS CAT No. 1005-000606 in finished condition[70]()
Specification : AS PER DRG. DS CAT No. 1005-00060
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.[70]()
Specification : BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) SIGHT REAR FOR MAG 7.62MM TO DRG. NO. DS CAT NO. 1005-006621 DC(I) NO. 25317-SA DT- 03.04.2002 IN FINISHED CONDITION.[70]()
Specification : SIGHT REAR FOR MAG 7.62MM TO DRG. NO. DS CAT NO. 1005-006621 DC(I) NO. 25317-SA DT- 03.04.2002 IN FINISHED CONDITION.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) CATCH REAR SIGHT CURSOR FOR MAG 7.62 MM[70]()
Specification : AS PER DRAWING
C
Estab
2) Pin for Pin Safety in finished condition of Striker Mechanism[70]()
Specification : Pin for Pin Safety in finished condition as
per Drawing No NAD 7606/1A of Striker
Mechanism No 8 MK-1
C
Estab
3) CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.[70]()
Specification : CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.
C
Estab
4) FEED ARM FOR AIR VERSION for MAG[70]()
Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION
C
Estab
5) FORE SIGHT 1005 007737 IN FINISHED CONDITION[70]()
Specification : FORE SIGHT TO DRG.NO. ARDE SK-3143/1, DS CAT NO. 1005-007737 IN FINISHED CONDITION. DC(I) NO. 26931-SA DT- 06.09.16
C
Estab
6) GUIDE, UPPER RIGHT TO DS CAT NO. 1005-006839 DC(I) NO. 25338-SA DT- 23.4.02 IN WITHOUT HEAT TREATMENT CONDITION.[70]()
Specification : GUIDE, UPPER RIGHT TO DS CAT NO. 1005-006839 DC(I) NO. 25338-SA DT- 23.4.02 IN WITHOUT HEAT TREATMENT CONDITION.
C
Estab
7) FRONT GUIDE RETURN SPRING TO DS CAT NO. 2540-002853 DC(I) NO. 25535-SA DT-30/09/2002 IN FINISHED CONDITION.[70]()
Specification : FRONT GUIDE RETURN SPRING TO DS CAT NO. 2540-002853 DC(I) NO. 25535-SA DT-30/09/2002 IN FINISHED CONDITION. (MATERIAL WILL BE SUPPLIED BY S.A.F ON FREIGHT TO PAY AGAINST B/G.
C
Estab
8) Housing Plunger to DS CAT NO 1005 007900[70]()
Specification : HOUSING PLUNGER TO DRG.NO. ARDE SK-2825/33 IN FINISHED CONDN DS.CAT.NO.1005-007900 DC(I) NO.26948-SA,DATED 26.09.16
C
Estab
9) HOUSING REAR SIGHT FOR CARBINE 5 56MM[01]()
Specification : HOUSING REAR SIGHT IC TO DRG NO. AKC-08/1/1 I.C.* FOR CARBINE 5.56MM.
C
Estab
10) Latch Special in finished condition[70]()
Specification : Latch Special in finished condition to CAT No. 5325-000862 Drg. No. CQA(I) 393/24
C
Estab
11) LEVER EXTRACTOR FOR REVOLVER[70]()
Specification : LEVER EXTRACTOR DRG.NO.PH-1-7 IN FINISHED CONDITION D.A. NO. 05/18 DT. 07-03-18.
C
Estab
12) LINK LOWER for MAG[70]()
Specification : LINK (LOWER) TO DS CAT NO. 1005-000469 DC(I) NO. 25303-SA DT- 23.01.02 IN FINISHED CONDITION WITHOUT HT & PLATING.
AS PER DRG
C
Estab
13) LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING.[70]()
Specification : LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING.
C
Estab
14) LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION.[70]()
Specification : LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION.
C
Estab
15) LOCATING FLANGE TRIGGER TO DS CAT NO. 1005-000623 DC(I) NO. 25310-SA DT-30.3.02 IN FINISHED CONDITION.[70]()
Specification : LOCATING FLANGE TRIGGER TO DS CAT NO. 1005-000623 DC(I) NO. 25310-SA DT-30.3.02 IN FINISHED CONDITION.
C
Estab
16) LOCK RETAINER IN FINISHED CONDITION[70]()
Specification : LOCK RETAINER IN FINISHED CONDN.AS PER DRG. NO.- ARDE/SK-2689/291.DS CAT NO.5340-015159. DC(I) NO-26518-SA DTD-6.07.10.
C
Estab
17) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition[70]()
Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition
C
Estab
18) Machining of Cap back of 9 mm Carbine DS CAT No. 1005-000860[70]()
Specification : AS PER DRG.
C
Estab
19) MULTI TOOTH LOCK WASHER[70]()
Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED.
C
Estab
20) NUT LOCKING BARREL for MAG[70]()
Specification : NUT LOCKING BARREL"0" NO. SIZE IN FINISHED CONDITION. D.S.CAT NO 5310-002661 DC(I) NO. 25349-SA DT 30.04.02
C
Estab
21) PAWL FEED FRONT TO DS CAT NO.1005-006637 DC(I) NO. 25321-SA DT- 08.04.02[70]()
Specification : PAWL FEED FRONT TO DS CAT NO.1005-006637 DC(I) NO. 25321-SA DT- 08.04.02 (I.C.DRG.NO. SKM 740*2 AGAINST LF NO. 0145077022 WILL BE SUPPLIED BY SAF AGAINST B/G)
C
Estab
22) PAWL FEED CENTRAL FOR MAG 762 MM[70]()
Specification : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 27019-SA DT. 28.01.2017 FOR MAG 7.62MM
C
Estab
23) PIN AUTO SEAR FOR JVPC[70]()
Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017 00DB
C
Estab
24) Pin Barrel Locking Catch[70]()
Specification : As per Drawing
C
Estab
25) PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.[70]()
Specification : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.
C
Estab
26) Pin fixing barrel DRG. No. PH-1-9[70]()
Specification : As per Drg.
C
Estab
27) PIN COCKING HANDLE IN FINISHED CONDITION TO DS CAT NO 5315 009175[70]()
Specification : PIN COCKING HANDLE IN FINISHED CONDITION TO DS CAT NO.5315-009175.DC(I) NO.26927-SA DT.02.09.16
C
Estab
28) Pin Groove Headed For Trigger & Safety Sear drg .no. ARDE SK-2689/132 for LMG/Rifle 5.56mm[70]()
Specification : AS PER DRG.
C
Estab
29) Pin Grooved Headed for Hammer DS CAT NO 5315 009190[70]()
Specification : Pin Grooved Headed for Hammer DS CAT NO 5315 009190
C
Estab
30) Pin grooved Headed for Hinge cover for Carbine 5 56[70]()
Specification : PIN GROOVED HEADED FOR HINGE COVER TO DRG. NO.ARDE/SK- 3143/29.DS CAT NO.5315-009188 DC(I) NO.26927-SA DT.02.09.16
C
Estab
31) PIN HAMMER FOR CARBINE 5 56MM IN FINISHED CONDITION[70]()
Specification : PIN HAMMER DRG NO AKC 01/16 FOR CARBINE 5.56MM IN FINISHED CONDITION
C
Estab
32) PIN HINGE CONNECTOR BUTT FOR CARBINE 5 56MMIN FINISHED CONDITION[70]()
Specification : PIN HINGE CONNECTOR BUTT DRG NO AKC 01/17 FOR CARBINE 5.56MMIN FINISHED CONDITION.
C
Estab
33) PIN RETAINING COCKING STUD TO DS CAT NO. 5315-004848 DC(I) N0. 25370-SA DT- 22/05/2002 IN FINISHED CONDITION.[70]()
Specification : PIN RETAINING COCKING STUD TO DS CAT NO. 5315-004848 DC(I) N0. 25370-SA DT- 22/05/2002 IN FINISHED CONDITION.
C
Estab
34) PIN RETAINING GAS CYLINDER for MAG[70]()
Specification : PIN RETAINING GAS CYLINDER TO DS CAT NO. 5315 - 001518 DC(I) NO. 27105-SA DT.20.06.17 IN FINISHED CONDITION.
C
Estab
35) PIN RETAINING GAS CYLINDER TO DS CAT NO. 5315 - 001518 DC(I) NO. 26138-SA DT- 02.02.06 IN FINISHED CONDITION.[70]()
Specification : PIN RETAINING GAS CYLINDER TO DS CAT NO. 5315 - 001518 DC(I) NO. 26138-SA DT- 02.02.06 IN FINISHED CONDITION.
C
Estab
36) PIN RETAINING HANDLE COCKING SLIDE for MAG[70]()
Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION.
C
Estab
37) PIN STRAIGHT HEADED OF GRIP LEFT ASSY FOR FIRING DEVICE IB FOR MINE[70]()
Specification : PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO.5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE
C
Estab
38) PIN STRAIGHT HEADED CARTRIDGE GUIDE PAWL for MAG[70]()
Specification : PIN STRAIGHT HEADED CARTRIDGE GUIDE PAWL TO DS CAT NO. 5315-001514 DC(I) NO. 27020-SA DT-28.01.17 IN FINISHED CONDITION.
C
Estab
39) PIN STRAIGHT HEADLESS AXIS LOCKING LEVER for MAG[70]()
Specification : PIN STRAIGHT HEADLESS (AXIS LOCKING LEVER) TO DS CAT NO. 5315-001525 DC(I) NO.27012-SB DT- 14.1.17 IN FINISHED CONDITION.
C
Estab
40) PIN TRIGGER HAMMER AND SEAR SAFETY for JVPC[70]()
Specification : PIVOT FEED LEVER DS CAT NO.1005-000462 DC NO. 25298-SA DTD.19.3.02
C
Estab
42) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003[70]()
Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
C
Estab
43) PLUNGER CATCH FOR MAG[70]()
Specification : PLUNGER, CATCH TO DS CAT NO. 1005-000443 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION.
C
Estab
44) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10[71]()
Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
C
Estab
45) Rear Feed Pawl FOR MAG[70]()
Specification : Rear Feed Pawl to DS CAT no. 1005-006638 DC(I) NO. 25321-SA, DT. 08-04-02 in finished condition
C
Estab
46) Rear Sight Cursor for MAG 7.62MM Drg No. 1005-000433[70]()
Specification : AS PER DRG. DS CAT 1005-000433 DC (I) 26752-SA DTD. 03.04.2015
C
Estab
47) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III[70]()
Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III
C
Estab
48) RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56[70]()
Specification : RETAINER TO DRG.NO.ARDE SK-2689/90 IN FINISHED CONDITION. DS CAT NO.1005-007824 DC(I)NO.26547-SA DT.24.11.2010
C
Estab
49) Ring for Pin Safety[70]()
Specification : Ring for Pin safety alternative design in finished condition for Striker Mechanism drawing No. NAD 7606/1A
R
Estab
50) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56[70]()
Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH
C
Estab
51) ROLLER FOR MAG[70]()
Specification : DRG NO. 1005-000559 DC(I) NO. 25307-SA DT-26/03/2002 IN FINISHED CONDITION.AS PER DRG.
C
Estab
52) ROLLER GUIDE FEED SLIDE LOWER FOR MAG[70]()
Specification : DS CAT NO.3120-004657 IN FINISHED CONDITION DC NO. 25298-SA , DT.19-03-02 (MAT.ST.RD.10 MM DIA GD.535A99 WILL BE SUPPLIED BY SAF ON B/G FROM L.F.NO.0352001010
C
Estab
53) ROLLER GUIDE FEED SLIDE UPPER FOR MAG[70]()
Specification : DS CAT NO. 3120-004658, DC NO.27108-SA,DT.23-06-17 IN FINISHED CONDITION (MATL.ST ROD.10 MM DIA WILL BE SUPPLIED BY S.A.F.ON B/G FROM L.F.NO.0352001010AS PER DRG.AS PER DRG.
C
Estab
54) Screw Barrel Cover for JVPC[70]()
Specification : Screw Barrel Cover M5x20 for 5.56 MM as per IS: 1366
C
Estab
55) SIDE STOCK TRIGGER GRIP LEFT IN FINISHED CONDITION FOR MAG[70]()
Specification : SIDE STOCK TRIGER GRIP LEFT IN FINISHED CONDITION TO DS CAT NO.1005-000602 DC (I) NO.25286 -SA DT:11 /03/2002
C
Estab
56) SLEEVE BOLT COVER IN FINISHED CONDITION[70]()
Specification : SLEEVE BOLT COVER IN FINISHED CONDITION DS CAT NO.1005-006624 DC (I) NO.26159-SA,DT.09-02-06 (MATL.ST.ROD 1/2" DIA GD.605M36 FROM L.F NO.0283001013/02830 00012 WILL BE SUP.BY.SAF .ON B/G.
C
Estab
57) SEAR TRIPPER FOR MAG[70]()
Specification : DRG.DS CAT NO.1005-000620 DC (I) NO.27019-SA DT.28.1.17 IN FINISHED CONDITION.
C
Estab
58) SPLIT COLLAR GAS REGULATOR FOR MAG[70]()
Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION.
12) CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION.[70]()
Specification : CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION.
C
Estab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) CATCH REAR SIGHT CURSOR FOR MAG 7.62 MM[70]()
Specification : AS PER DRAWING
C
Estab
2) Pin for Pin Safety in finished condition of Striker Mechanism[70]()
Specification : Pin for Pin Safety in finished condition as
per Drawing No NAD 7606/1A of Striker
Mechanism No 8 MK-1
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) PIN LOCKING CONNECTOR TO DRG. NO. BOF-6101832[90]()
Specification : PIN LOCKINGCONNECTOR TO DRG. NO. BOF-6101832
C
Nonestab
2) PIN LEFT TO DRG. NO. BOF-5047186[90]()
Specification : PIN LEFT TO DRG. NO. BOF-5047186
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) PIN SHOULDER TO DRG. NO. 5315-001003[90]()
Specification : PIN SHOULDER TO DRG. NO. 5315-001003
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) PIN TO DRG. NO. BOF - 6009603[90]()
Specification : PIN TO DRG. NO. BOF - 6009603
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) PIN LEFT TO DRG. NO. BOF-5047186[90]()
Specification : PIN LEFT TO DRG. NO. BOF-5047186
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) PIN SHOULDER TO DRG. NO. 5315-001003[90]()
Specification : PIN SHOULDER TO DRG. NO. 5315-001003
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) PIN (L-7/247A) TO DRG. NO. BOF - 6127321[90]()
Specification : PIN (L-7/247A) TO DRG. NO. BOF - 6127321
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) PLUNGERS HEAD LOCKING PIN TO PART NO 6112420[90]()
Specification : PLUNGERS HEAD LOCKING PIN TO PART NO 6112420
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9081005312 LOCKING PIN D 12MM L 90MM PT 517149[90]()
Specification : LOCKING PIN D=12MM,L=90MM PART NO 5171493IN 5171492 WITH 4
ITEM AS LIST: A) Locking pin (KIPP PART NO K0366-25812090)
EQUIVALENT TO GCF PART NO 5171493 (QUANTITY:1).
B) KEY RING N5-12-20X2, 5(KIPP PART
C
Nonestab
2) 9081005313 LOCKING PIND 10M L 60MM PT 5171492[90]()
Specification : LOCKING PIN D=10MM,L=60MM PART NO 5171492 WITH 4 ITEMS AS
LIST: A) LOCKING PIN(KIPP PART NO K0366-25110060) EQUIVALENT
TO GCF PART NO 5171492(QUANTITY:1).
B) KEY RING N5-12-20X2,5(KIPP PART NO KO367.230
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT SIGHT BLOCK BLANK S3 L F No 7024012072[70]()
Specification : AS ER DRG No.TEND 2508 (for K 1207)
R
Nonestab
2) SUPPLY OF STAY HAMMER TO DRG No TEND 2016 WITH FIRMS MATERIAL ICR1333[70]()
Specification : AS PER DRG. No. TEND 2016 WITH FIRM'S MATERIAL.(ICR-1333)
C
Nonestab
3) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()
Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION
C
Nonestab
4) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL
C
Nonestab
5) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Nonestab
6) PIN LOCKING PIN FIRING AND EXTRACTOR COMPONENT DRG NO 6P11 3 17 DRG NO 62 C 3017 200 D3[70]()
Specification : AS PER DRAWING OF PIN LOCKING PIN FIRING AND EXTRACTOR COMPONENT DRG NO 6P11 3 17 DRG NO 62 C 3017 200 D3
R
Nonestab
7) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL
Specification : AS PER DRG. No.29P 0004* required for 0.315" Sporting Rifle
C
Nonestab
3) TRIGGER TO DRG NO 29P 0040STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle
C
Nonestab
4) PIN STOP BOLT LOCKING TO DR NO 29P 0048STAR required for 0POINT315 Sporting Rifle[70]()
Specification : DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle
C
Nonestab
5) SCREW PLATE BUTT TO DRG NO 29P 0059STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle
C
Nonestab
6) SWIVEL SLING REAR TO DRG NO 29P 0065STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle
C
Nonestab
7) SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
8) MSL HOUSING LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
9) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
10) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BUTTON FEED BOX A3-134 MAG7.62MM[70]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Holdall SA 1A 1005 000005[70]()
Specification : Holdall SA 1A DS CAT No. 1005-000005
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Fore Sight Housing[70]()
Specification : Fore Sight Housing to DS CAT No. 1005-000426 in without Heat Treatment Condition
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BLANK OF BLOCK GAS For JVPC[70]()
Specification : BLANK OF BLOCK GAS For JVPC
P
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) PIN REAR MOUNTING for MAG[70]()
Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA[70]()
Specification : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE[70]()
Specification : MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
C
Nonestab
2) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
3) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOOSTER CUP & PIN FOR 84MM HEAT-551[99]()
Specification : SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) LOCK WASHER JZE-2.55 (HEAT-551)[99]()
Specification : LOCK WASHER JZE-2.55 TO DRG.NO.TRD-1-2-2269.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TRACER BODY DRG NO.F1334-154780-D[99]()
Specification : TRACER BODY TO DRG NO.F-1334-154780-D, DC-36534-A DT.6/3/99
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) RIVET 2X10 TO DRG NO TRD 1 2 2239 LF 9911357870[99]()
Specification : RIVET 2x10 TO DRG.NO.TRD-1-2-2239.
C
Nonestab
2) SLIDING DISC PART NO 6413413 LF 9911358440[99]()
Specification : SLIDING DISC PART NO.6413413 TO OEM DRG.NO.304052464/ TRD.DRG.NO.1.2.2627
R
Nonestab
3) WASHER AS PER DRG NO MKTA 754152 003 LF 9911358670[99]()
Specification : WASHER AS PER DRG NO MKTA 754152 003 TRD 1 1 3223
C
Nonestab
4) WASHER AS PER DRG NO TRD 1 1 3223 LF 9911358675[99]()
Specification : WASHER AS PER DRG MKTA 754152 003 TRD 1 1 3223 ALT
C
Nonestab
5) SHELL HEI EMPTY 30MM BMP II LF 9911358129[99]()
Specification : BODY EMPTY WITH BAND ASSY TO DRG NO.bw5.500.009Cb/c 2 SHEETSSHEET-1 DC-37321-A DT 18-10-12 SHEET-2 DC- 34241-ADT.24/09/87 SPECN.PROGRAMME AND METHOD OF TESTING AS PERSHEET NO.5w5.500.112 M/C (5 SHEET) DC-34241-A DT.24-9-87.
C
Nonestab
6) DELAY TUBE EMPTY FOR DET 36M 7SEC LF 9911358772[99]()
Specification : DELAY TUBE (EMPTY) TO DRG.IQX 922 DC 36852-A DT.23/09/2002 FOR DETONATOR 36M 7 SEC
C
Nonestab
7) PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817[99]()
Specification : 81 MM PRIMER BODY TO DRG NO. IQX 861DC NO 36304-A DT. 03/07/97, SPECIFICATION OF MATERIAL, PROTECTIVE FINISH AND OTHER GENERAL REQUIREMENT TO THE
COMPONENT AS PER SPECIFICATION MENTIONED IN DRG NO. IQX861DC NO 36304-A DT. 03/07/97 & 04/
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BAND RETAINER TO DS CAT NO 5340 015713[70]()
Specification : BAND RETAINER TO DS CAT NO. 5340-015713 D.C.NO. 26928-SA DT. 02.09.16 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) ROD CLEANING FOR MAG[71]()
Specification : ROD CLEANING 7.62MM BARREL GAS CYLINDER 1ATO DS CAT NO.1005-000358 DC (I) NO.23088-SA DT.19-9-95IN FINISHED CONDITION.,
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
2) SIGHT LEAF DRG No SK 6540 TE[70]()
Specification : SIGHT LEAF DRG No SK-6540/TE
C
Nonestab
3) LATCH DRG No SK 6535 TE[70]()
Specification : LATCH DRG No SK- 6535 /TE
C
Nonestab
4) RETAINER Drg No SK 6526 TE[70]()
Specification : RETAINER Drg. No. SK-6526/TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) ROD CLEANING SMALL ARMS[70]()
Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE[70]()
Specification : MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
C
Nonestab
2) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
3) SLIDE DRG No SK 6534 TE[70]()
Specification : SLIDE DRG No SK-6534/TE
C
Nonestab
4) LATCH DRG No SK 6535 TE[70]()
Specification : LATCH DRG No SK- 6535 /TE
C
Nonestab
5) PIN DRG No SK 6531 TE[70]()
Specification : PIN DRG No SK- 6531/ TE
C
Nonestab
6) Cleaning Rod Drg No SK 6574 TE[70]()
Specification : Cleaning Rod Drg No. SK- 6574/ TE
C
Nonestab
7) RIVET SK 6529 TE[70]()
Specification : RIVET SK- 6529/ TE
C
Nonestab
8) RAIL SK 6548 TE[70]()
Specification : RAIL SK-6548/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MFG & SUPPLY OF LEVER LOCKING PIN TO DRG.NO 32P 4713 (M) WITH FIRM'S MATERIAL FOR UBGL[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SCREW SEAR TO DRG NO 29P 0058 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG. NO 29P 0058 required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO TEND2450 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL
C
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SEMI FINISHED BLANK PIN LEVER TRIGGER AND PIN FIRING FOR 40MM UBGL TO DRG NO. TEND 2193 WITH FIRM'MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
2) SEMI FINISHED BLANK PIN CATCH FOR 40MM UBGL TO DRG NO. TEND 2191 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
3) SEMI FINISHED BLANK PIN EXTRACTOR FOR 40MM UBGL TO DRG.NO. TEND 2192 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
4) SEMI FINISHED BLANK PIN FOR EJECTOR & SEAR FOR 40MM UBGL TO DRG NO. TEND 2190 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
5) PIN COCKING ARM TO DRG NO. 32P 4103*2 (FULLY FINISHED) WITH FIRM'S MATERIAL FOR 40MM UBGL[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) FRONT FEED PAWL for MAG
Description : FRONT FEED PAWL for MAG()
Specification : FRONT FEED PAWL DS CAT NO 1005-006637 IN FINISHED CONDTION WITH FIRM MATERIAL FOR MAG 7.62MM DC(I) NO. 25321-SA, DT. 08-04-02
C
Estab
2) PIVOT COVER SLIDE GUIDE ROLLER FOR MAG
Description : PIVOT COVER SLIDE GUIDE ROLLER FOR MAG()
12) PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM
Description : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM()
Specification : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM
C
Estab
13) Cleaning Tool SA No.-2 MK-1 to DS CAT No. 1005-000768
Description : Cleaning Tool SA No.-2 MK-1 to DS CAT No. 1005-000768()
Specification : Cleaning Tool SA No.-2 MK-1 to DS CAT No. 1005-000768
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT[00]()
Specification : ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Dumdum
Name
Specification
Use
Status
1) FIN ASSY DET NO 1 SHT 7 TO DRG NO ARDE 2121 IN SEMI FINISHED CONDITION UPTO TACK WELDING[62]()
Specification : FIN ASSY.DET NO-1 SHT-7 TO DRG.NO.ARDE-2121 IN SEMI-FINISHED CONDITION UPTO TACK WELDING
C
Nonestab
2) STEEL CONTAINER FOR TU 1111 mod[14]()
Specification : STEEL CONTAINER (FOR TAIL UNIT NO.1111) TO DRG.NO.ARM 1519 IN FINISHED CONDITION
C
Nonestab
3) STEEL BOX FOR RTU 1121[62]()
Specification : BOX STEEL NO.-- MK-- TO DRG.NO.ARDE-2039 IN FINISHED CONDIT ION FOR 01 RTU TAIL UNIT NO. 1121, HOUSING BLOCK & CLEVIS UNIT ASSY. FOR 1000 LB MK 6 / MK 9 BOMB
C
Nonestab
4) FIN ASSY WELDING FOR TU 250[62]()
Specification : FIN ASSY. (WELDING) DET. NO.-13,SHT.NO.-1 TO DRG.NO.:ARDE 9501-03 IN FINISHED CONDITION (4 TO A SET).
C
Nonestab
5) FIN ASSY TO DRG NO ARDE 2139 DET NO 14 WITHOUT PROTECTIVE FINISH FOR TU 1111[62]()
Specification : FIN ASSY.TO DRG. NO. ARDE 2139, DET. NO. 14 WITHOUT PROTECTIVE FINISH
C
Nonestab
6) BOX STEEL NO 1 MK 1 TO HOLD 1 TAIL UNIT NO TB 250 OR TAIL UNIT TB 250 MOD 1 IN FINISHED CONDITION[14]()
Specification : BOX STEEL NO.1,MK-1 TO HOLD 1 TAIL UNIT NO.TB-250 OR TAIL UNIT TB 250-MOD-1 TO DRG.NO.[ARDE 9501-05 SHT.1/3 & SHT.2/3 WITH DC "ISSUE A" DT-10-03- 05 & SHT.3/3 WITH DC AL. NO.07/2008.DT.31-01-08.IN FINISHED CONDITION
C
Nonestab
7) COMPLETE BOX STEEL FOR TR 250[62]()
Specification : COMPLETE BOX STEEL NO.1 MK-1 TO HOLD 1 TAIL UNIT NO.TR 250 TO DRG.NO.ARDE 9501-04 SHT.1 & SHT.2 IN FINISHED CONDITION
C
Nonestab
8) BOX STEEL IN FC FOR RTU 2231[62]()
Specification : BOX STEEL NO. 1 TO DRG.NO.ARDE-2283 TO HOLD 01 HOUSING BLOCK & CLEVIS UNIT ASSY. & 01 TAIL UNIT No. 2231 WITH PARACHUTE FOR BOM 450 KG HSLD
C
Nonestab
9) STEEL SHEET FOR AERIAL BOMB[01]()
Specification : STEEL SHEET TO SIZE 3000 MM LONG X 1250 MM WIDTH X 2.24 MM T HICK (TOLERANCE +0.1 MM, -0.0 MM IN THICKNESS) TO SPECN IS : 5986 - 2002, GRADE : FE - 410
1) 6043000210 BOMB BODY 81MM MOR C EMP ITV 9A[60]()
Specification : CQA(A) 2305(M)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Grey Iron Foundry
Name
Specification
Use
Status
1) SUSPENSION LUG. SUSPENSION LUG, AS PER DRG. NO. AQAW(A)/SK/MISC/14/1[62]()
Specification : SUSPENSION LUG.
SUSPENSION LUG, AS PER DRG. NO. AQAW(A)/SK/MISC/14/1
C
Nonestab
Category : dp
Grade : Grade I
Size :
S
1Grey Iron Foundry
Name
Specification
Use
Status
1) FINISHED FORGED HEAD COMPONENT OF 100/120 KGS. AERIAL BOMB[42]()
Specification : FINISHED FORGED HEAD COMPONENT OF 100/120 KGS. AERIAL BOMB
FINISHED FORGED HEAD COMPONENT OF 100/120 KGS. AERIAL BOMB
AS PER TERMS & CONDITIONS OF ANNEXURE 'A' ATTACHED
C
Nonestab
Category : dp
Grade : Grade I
Size :
S
1Grey Iron Foundry
Name
Specification
Use
Status
1) FORGED HEAD (UN-MACHINED) FOR 100-120 KG. AERIAL BOMB AS PER GIF DRAWING NO. 5310-A/FORGE AND TERMS & CONDITIONS ENCLOSED[66]()
Specification : FORGED HEAD (UN-MACHINED) FOR 100-120 KG. AERIAL BOMB
AS PER GIF DRAWING NO. 5310-A/FORGE
Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788.
C
Nonestab
7) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "
C
Nonestab
8) Nose Plug 1000LBS(6220901044)[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE
TREATED]. [DRG. ENCLOSED.
C
Nonestab
9) Nose Plug 250KG (6240900504)[62]()
Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED).
DRG. ENCLOSED
C
Nonestab
10) ROLLING RING ASSEMBLY 450KG (6231100104)[62]()
Specification : ROLLING RING ASSEMBLY FOR 450 Kg HSLD BOMB AS PER Drg.No.-
ARDE-2122 DET.17 (WITHOUT PHOSPHATED) Drg.ENCLOSED,
C
Nonestab
11) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
12) NOSE PLUG 450KG (6230900504)[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7
[DRG. ENCLOSED]. [W/O SURFACE TREATED.
C
Nonestab
13) TA LINK FORGING[61]()
Specification : AS PER SPECIFICATION
C
Nonestab
14) SET OF TA SHOE AND TA GUIDE FORGING[61]()
Specification : AS PER SPECIFICATION
C
Nonestab
15) TA CLAMP FORGING[61]()
Specification : AS PER SPECIFICATION
C
Nonestab
16) TA LINK MACHINED FOLLOWED BY FORGING[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
17) SET OF TA SHOE AND TA GUIDE MACHINED FOLLOWED BY FORGING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
18) TA CLAMP MACHINED FOLLOWED BY FORGING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
19) TA WASHER T-90 (6120100106)[61]()
Specification : TA WASHER TO DRG.NO.OFM-32839.
C
Nonestab
20) TA PIN BLANK T-90 (6120100118)[61]()
Specification : T.A. PIN BLANK TO DRG. NO. OFM-32951 AS PER SPECIFICATION NO
OFM/TDS/TECH/O6A.
Specification : DRG. NO. OFBA/MPC/75. ALL THE ACCEPTANCE AND INSPECTION/QUALITY CRITERIA SHOULD BE AS PER TU 34E-2015
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Nalanda
Name
Specification
Use
Status
1) WOODEN CRATE[65]()
Specification : OFN/BMCS/M-92/WOODEN CRATE
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Nalanda
Name
Specification
Use
Status
1) WOODEN CRATE[65]()
Specification : OFN/BMCS/M-92/WOODEN CRATE
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) MOP.12 SHELLS 155MM B/T ON PELLET WITHOUT GRUMET[62]()
Specification : MOP.12 SHELLS 155MM B/T ON PELLET WITHOUT GRUMET TO DRG.NO:155-1000(M)(UNIT LOAD) CONSISTING OF PALLET TO DRG.NO.155-1210(M), FRAME ASSEMBLY TO DRG.NO.155- 1230(M) DCNO.37126-A,DT.25.7.07.
C
Nonestab
2) BOX UNIT LOAD FOR 155MM SHELL M107[14]()
Specification : BOX UNIT LOAD FOR 155MM SHELL M107 TO DRG.NO. 3058086, WITH LATEST DC(I) 36820-A, DT.16.03.2002
C
Nonestab
3) AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS[14]()
Specification : AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS TO DRG.PT.NO.ISV 587 A, DC.37127-A DT.30.07.07.
Specification : As per requirement and specification
R
Estab
2) COTTON FABRIC S.D. PARA SCOURED 91 CM[21] (SSA OF MORARJEE TEXTILES LTD., MUMBAI)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
3) CLOTH DUCK POLYESTER COTTON RIP STOP 425 GMS OG WP 135 CMS[21] (SSA OF MORARJEE TEXTILES LTD., MUMBAI)()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
L
1Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) Cloth Polyester and Cotton Combination of Plain Weave and Modified Plain Weave Sage Green 150 cm width minimum excluding selvedges (SSA of OEM M/s.Morarjee Textiles Ltd)()
Specification : IAFS 09149 : 2016 with Amendment No.8
R
Nonestab
Category :
Grade : Grade III
Size :
L
1Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) CLOTH DRILL COTTON WHITE BLEACHED 142 CMS MINIMUM WIDTH EXCLUDING SELVEDGES (SSA of OEM M/s.Morarjee Textiles Ltd)()
Specification : VARIETY NO.3 OF IS:177:1989 (FOURTH REVISION) REAFFIRMED 2014
R
Nonestab
2) CLOTHPOLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CMS MINIMUM EXCLUDING SELVEDGES (SSA of OEM M/s.Morarjee Textiles Ltd)()
Specification : AS PER ENCLOSED SPECIFICATION
R
Nonestab
3) CLOTH Plain Weave Polyester and Cotton Grey 138 cm Width Min Excluding Selvedges (SSA of OEM M/s.Morarjee Textiles Ltd)()
Specification : IND/TC/0042/F
R
Nonestab
4) CLOTH DRILL COTTON KHAKI 142 CM V NO 3 MINIMUM WIDTH EXCLUDING SELVEDGES (SSA of OEM M/s.Morarjee Textiles Ltd)()
Specification : IS:177-1989 (IV REVISION) REAFFIRMED 2014 CONFIRMING TO V.NO.3
R
Nonestab
5) Cloth Drill Cotton Navy Blue 142 cms V No 4 minimum excluding selvedges N H Q (SSA of OEM M/s.Morarjee Textiles Ltd)()
8) CLOTH DRILL COTTON NAVY BLUE 142 CMS V No 3 MINIMUM WIDTH EXCLUDING SELVEDGES (SSA of OEM M/s.Morarjee Textiles Ltd)()
Specification : AS PER ATTACHMENT
R
Nonestab
Category :
Grade : Grade III
Size :
L
1Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 250 GSM FOR JUNGLE WITH ARMY LOGO 152 CMS MINIMUM EXCLUDING SELVEDGES
( as sole selling Agent of OEM M/s. Morarjee Textiles Ltd.,Maharashtra )()
Specification : NO. PROV/OCFAV/FABRIC/001 (a) with Amendment No.2
Specification : SPECIFICATION NO. : ADRDE/SPECN/1982/7(c)
sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S.
R
Nonestab
3) FABRIC NYLON LT WT 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 AS PER IS SPECN NO IS 5 1994 122 CM WIDTH[2101221981]()
Specification : SPECN. NO. IS:4726-1984 Except that :-(i) Page 4, Clause 2.2.1, third line has been deleted from IS. (ii) Page 7, Table 1, Note 2 has been amended as given For - 210 g/cm2
R
Nonestab
4) DUCK NYLON 230 GM OG 91point4 CM[2101138892]()
Specification : ADRDE/SPECN/1984/23(d).
R
Nonestab
5) DUCK NYLON FABRIC BLACK 230 GM[2101138893]()
Specification : ADRDE/SPECN/1984/23(a) EXCEPT THE COLOUR WILL BE BLACK INSTEAD OF OG
R
Nonestab
6) FABRIC NYLON 32GM UD 107CM MIN WIDTH EXLUDING SELVEDGE[2101221287]()
Specification : ADRDE/QMS/TDTM/SPECN/95 With following note:-
(i) The nylon multifilament yarn which is to be used to manufacture the fabric should have a minimum tenacity of 6.5 gms per denier.
(ii) There should not be any type of yarn distortion/yar
R
Nonestab
7) FABRIC NYLON LT WT 37g RIP STOP WEAVE OLIVE DRAB SHADE NO 298 AS PER SPECN NO IS 5 1994 94 CM WIDTH[2101221982]()
Specification : SPECIFICATION NO. IS:4726-1984.
EXCEPT THAT:-
i) page 4, clause 2.2.1, third line has been deleted from IS.
ii) page 7, table 1, note 2 has been amended as given
FOR:- 210 g/sq.cm
READ:- 200 g/sq.cm
R
Nonestab
8) PU Coated Nylon Fabric 300 GSM OG[2101221366]()
12) FABRIC NYLON 66 93 GM ORANGE SHADE ISC NO 592 AS PER IS 5 2007 WIDTH 100 CM[2101226096]()
Specification : SPECN-ADRDE/SPECN/2000/53(c)
1-COLOUR FASTNESS TO LIGHT OF FINISHED FABRIC SHALL BE 5 OR BETTER WHEN TESTED AS PER IS:2454
2-COLOUR FASTNESS TO WASHING OF FINISHED FABRIC SHALL BE 4 OR BETTER WHEN TESTED AS PER TEST 1 IS:687.
R
Nonestab
13) FABRIC NYLON 58 GM UD 105 CM MIN WIDTH EXCLUDING SELVEDGE[2101221384]()
Specification : SPECN NO. AS PER TECH. PARTICULARS
(a) MASS/SQ MET : 58 GM (MAX)
(b) BREAKING STRENGTH, BOTH WAYS : 60 KGF (MIN)
(C) TEARING STRENGTH, BOTH WAYS : 1.7 KGF (MIN)
(d) AIR POROSITY : 7-10 CU.FT/SQ.FT/SEC.
(e) THICKNESS:0.11M, MAX AT A P
Specification : ADRDE/QMS/TDTM/F/2012/02 DATED 19 JAN 2012 and
(i) The fabric shall have an initial spray rating of 80, 80, 70 minimum when tested as per AATCC 22 or equivalent test method.
(ii) The manufacturer shall submit a certificate of complia
13) HANDLE LEVER 765 58 221 C
Description : HANDLE LEVER 765 58 221 C()
Specification : HANDLE LEVER DRG. NO. 765-58-221/C
C
Estab
14) Hinge Driver Hatch Assembly forging
Description : Hinge Driver Hatch Assembly forging()
Specification : Hinge (Driver Hatch Assembly) forging
C
Estab
15) LOOM CLIP FOR ELECTRICAL FITMENT FOR MPV AS PER DRG NO HULL MPV 102
Description : LOOM CLIP FOR ELECTRICAL FITMENT FOR MPV AS PER DRG NO HULL MPV 102()
Specification : LOOM CLIP FOR ELECTRICAL FITMENT FOR MPV AS PER DRG NO HULL/MPV/102
Specification : ASSY TAIL LAMP BKT. DRG NO.261454400108 COSTING OF PT.NO/DRG NO.261454400110,ASSY GRILL GUARD TO DRG.NO.222654400101(b) MOUNTING BKT TO DRG NO.2226542008201a TWONOS EACH) BKT TO DRG. NO.261454408209, BKT.261454408208, CHANNEL 26145440820
C
Estab
3) LPTA Stud for water Tank
Description : LPTA Stud for water Tank()
Specification : STUD FOR WATER TANK FITMONT (4/SET) 2614 7061 8801 NOTE: - TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION
C
Estab
4) LPTA Stud Rear
Description : LPTA Stud Rear()
Specification : STUD REAR (M12X260 LENGTH) PART NO. 215470618802N NOTE:- TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION
C
Estab
5) Oil can Carrier LPTA Part No.- BPD11117-84
Description : Oil can Carrier LPTA Part No.- BPD11117-84()
Specification : As per specification / Drg. no./Pt. no. BPD11117-84
C
Estab
Category : p
Grade : 3
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) BOX STEEL NO. S 6 MK1 DRG.ARDE 2225[65]()
Specification : DRG. NO. ARDE 2225 SHEET NO.3
C
Nonestab
2) BOX NO.428 MK.1[65]()
Specification : DRG. NO. D.D.(L) 18704
C
Nonestab
3) BOX C 28 A STEEL[65]()
Specification : DESIGNERS REF CIA/AMN/1180 PART NO.ISV 357 A
C
Nonestab
4) BOX M 104 MK1 PAINTED OLIVE GREEN[65]()
Specification : IA 1169
C
Nonestab
5) AMMN.CONTAINER BOX B-9 A[65]()
Specification : IA 1169
C
Nonestab
6) BOX G 70 MK1(STEEL)OLIVE GREEN.[65]()
Specification : IA 1169
C
Nonestab
7) BOX H2A DRG.CIA/AMMN/468[65]()
Specification : IA 1169
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) BOX M 104 MK1 PAINTED OLIVE GREEN[65]()
Specification : IA 1169
C
Nonestab
2) AMMN.CONTAINER BOX B-9 A[65]()
Specification : IA 1169
C
Nonestab
3) BOX G 70 MK1(STEEL)OLIVE GREEN.[65]()
Specification : IA 1169
C
Estab
4) BOX 682 MKI W/O LINER IA 896/1[65]()
Specification : IA 1163
C
Nonestab
5) CARRIER 6A/L,STEEL,TO DESIGNER'S REF CIA/AMN/1162,PART NO.ISV 354-A,SPECN IA 1169 DULY PAINTED AS PER DRG WITH PAINT OF SHADE OLIVE GREEN ISC:220[65]()
Specification : IA 1169
C
Estab
6) CARRIER NO 13A CIA/AMMN/2198[65]()
Specification : IA 1169
C
Estab
Category : p
Grade : Grade III
Size :
S
2450
NEXT GENERATION TECHNOLOGIES
PLOT NO 176, G2, SANJANA EMERALD ROAD NO 2 P AND T COLONY MEDIPALLY HYDERABAD Telangana
PIN1 : 500092
Phone No. : 27206659 GSTIN :
36AAKFN1918L1ZY
Specification : VIDEO PROCESSING BOARD DRG NO. 096701070400000 ALONGWITH CONNECTORS AND MATING CABLE AS PER ATTACHED DRG/SPECN. AS APPENDIX-1 OF 0 TO 18 PAGES ( TOTAL 19 SHEETS)
C
Estab
Category : p
Grade : Grade III
Size :
S
1Opto Electronic Factory
Name
Specification
Use
Status
1) POWER SUPPLY CUM CONTROL BOARD (L.F.9001121272)[90]()
Specification : POWER SUPPLY CUM CONTROL BOARD DRG.NO. 096701070300000 ALONGWITH CONNECTORS AND MATING CABLE AS PER ATTACHED DRG./SPECN. AS PER APPENDIX-II OF 5 PAGES.
1) SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607 STAR 5 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR[70]()
Specification : AS PER DRG NO. TEND 2607 STAR 5 WITH OFT MATERIAL
C
Nonestab
2) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)
C
Nonestab
3) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
4) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]()
Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL
C
Nonestab
5) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
6) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG No K 3011 STAR REQUIRED FOR TAR[70]()
Specification : AS PER DRG No.K-3011* REQUIRED FOR TAR
C
Nonestab
7) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
8) KEY[74]()
Specification : KEY (View) AS PER DRG NO.074264A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
9) GUIDE RECOIL FRONT[74]()
Specification : GUIDE RECOIL FRONT (View) AS PER DRG NO.075870A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STR7[70]()
Specification : PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Nonestab
2) SHIELD FRONT FOR 40MM MGL WITHOUT HEAT TREATMENT AS PER DRG NO TEND 2724[70]()
Specification : AS PER OFT REQUIREMENTS
E
Nonestab
3) PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR[70]()
Specification : PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) RIVET SUPPORTING SIDE AS PER DRG NO K 4014 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 4014 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()
Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Change Lever RH[70]()
Specification : As per Drawing
C
Nonestab
2) Change Lever LH[70]()
Specification : As per Drawing
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) 44P03010 20MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT SPECIFICATIONS
R
Nonestab
2) 44P14006 14 5MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRAME BASKET WELD View AS PER DRG noY19388A 00 FOR MECH SRU ASSY OF SRCG[74]()
Specification : FRAME, BASKET, WELD (View) AS PER DRG.no.Y19388A-00. FOR MECH SRU ASSY OF SRCG.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material[70]()
Specification : Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL
Specification : Concetrated Nitric Acid, Strength-98% As per IS 264:2005 (Specification of CNA Explosive Grade) All other parameters to be as per (IS 264:2005)
R
Nonestab
Category : s
Grade : Grade II
Size :
S
1Ordnance Factory Varangaon
Name
Specification
Use
Status
1) Sodium Bichromate (Technical)[10]()
Specification : IS : 249-1979 (Third Revision)
Packed in 50 Kg of Polythene Lined Bags
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Varangaon
Name
Specification
Use
Status
1) Barium Nitrate Grade-I[10]()
Specification : To Specn. : JSS : 6810-59-2016, Revision No. 4,
DC No. 5480-ME Dtd. 24-09-20016.
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Varangaon
Name
Specification
Use
Status
1) Strontium Nitrate for Pyrotechnic Compo.[10]()
Specification : IS : 5671 of 1984.1st Rev. Amnd. No. 1, Reaffirmed 2011,
in the form of crystals without lumps, Particle Size :- Passing through 150 Micron I.S. sieve 100 BSS Min. 50% and retained on 63 Micron I.S. Sieve 240 BSS Min. 93%.
Packed in Pol
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambernath
Name
Specification
Use
Status
1) CHROMIC ACID[10]()
Specification : S PER REQUIREMENT / GIVEN SPECIFICATION.
Specification : TAIL UNIT ASSEMBLY TO DRG.NO.AAIW/BS-0071
CONSISTING OF CONE TO DRG NO. AAIW/BS-0071/1, STABILISER FIN TO DRG NO. AAIW/BS-0071/2, STABILISER RING ASSEMBLY TO DRG NO. AAIW/BS-0071/3, AND BASE BUSH TO DRG NO. AAIW/BS-0071/4.
C
Nonestab
Category : ddp
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TAIL UNIT NO- TB 250 (9911358363)[99]()
Specification : TAIL UNIT NO.TB-250,DRG.NO.ARDE-9501-03 DT.19 APR 2000.AND SPECN.NO.ARDE/SPECN./613 PROVISIONALLY APPROVED ON 19 APR2000 AND AMENDED VIDE RCMA(AA)/1440/5/TECH DATED 29 APR 2010.PACKAGE DESCRIPTION-BOX STEEL NO.1 MK-I TO HOLD 1 TO DRG.NO.AR
C
Nonestab
Category : ddp
Grade : Grade III
Size :
L
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL)[65]()
Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576
P
Nonestab
Category : ddp
Grade : Grade III
Size :
S
2455
Maa Chandra Chemical
53 Uptron state panki Side 1 Kanpur Panki Kanpur Uttar Pradesh
PIN1 : 208009
Phone No. : 9838775770 GSTIN :
09AATFM7014M1ZM
1) BRUSH AS PER DRG No K 9003 STAR WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9003* WITH FIRMS MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PULL THROUGH 1A NYLON AS PER DS CAT NO 1005 001760 FOR DC NO 22520 SA DATED 2 point 5 point 94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7point 62mm 1A1[70]()
Specification : AS PER DS CAT NO.1005-001760 FOR DC NO. 22520-SA DATED 2.5.94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7.62mm 1A1
E
Nonestab
2) PULLTHROUGH WEIGHT FOR 7POINT62MM RIFLE[70]()
Specification : AS PER DRG
E
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142[70]()
Specification : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BRUSH CLEANING BRACKET AND CYLINDER GAS[71]()
Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.
1) FINISHED FORGED HEAD COMPONENT OF 100/120 KGS. AERIAL BOMB[42]()
Specification : FINISHED FORGED HEAD COMPONENT OF 100/120 KGS. AERIAL BOMB
FINISHED FORGED HEAD COMPONENT OF 100/120 KGS. AERIAL BOMB
AS PER TERMS & CONDITIONS OF ANNEXURE 'A' ATTACHED
C
Nonestab
Category : dp
Grade : Grade II
Size :
L
1Grey Iron Foundry
Name
Specification
Use
Status
1) FORGED HEAD (UN-MACHINED) FOR 100-120 KG. AERIAL BOMB AS PER GIF DRAWING NO. 5310-A/FORGE AND TERMS & CONDITIONS ENCLOSED[66]()
Specification : FORGED HEAD (UN-MACHINED) FOR 100-120 KG. AERIAL BOMB
AS PER GIF DRAWING NO. 5310-A/FORGE
Specification : FABRICATION OF OVERALL CE
SWO PART No. 60158
SPECIFICATION: No. IND/NAVY/TC/4660 WITH AMENDMENT NO.1
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICAT
E
Nonestab
Category : p
Grade : Grade III
Size :
S
2460
Aerospace Engineers Pvt. Ltd., Salem
The Salem Aeropark, 8/63, NH-7, Ammapalyam Village, Mallur, Salem Tamilnadu
PIN1 : 636203
Phone No. : 0427-2422232 GSTIN :
33AAOCA3568N1Z5
