ORION CHEM PVT. LTD.
UNIT # 2, BUILDING III, SECTOR III, MILLENNIUM BUSINESS PARK, MAHAPE, NAVI MUMBAI, MAHARASHTRA
PIN1 : 400710
Phone No. : 022-27782942,43 GSTIN : 27AAACO4106C1Z1
SPECN: JSS-6810-48: 2008 (REV. NO. 3) DC NO. 3920-ME.
R
NOT ESTABLISHED
3) LEAD RED()
SPECN: IS-8063-1976 (REAFFIRMED 2005)
R
NOT ESTABLISHED
Category : P
Grade : II
Size :
S
1) Ordnance Factory Itarsi
Name
Specification
Use
Status
1) MAT-O-BOND()
ERDL/TRIM/PROP/RM/7 DT. 11-08-1992
R
ESTB
2) MAPO()
ERDL/TRIM/PROP/RM/13 DT.09-11.1992
R
ESTB
Category : P
Grade : II
Size :
S
1) Ordnance Factory Bhandara
[ENR Registration]
Name
Specification
Use
Status
1) ETHYL CELLULOSE HIGH VISCOCITY TYPE N-200
Description : ETHYL CELLULOSE HIGH VISCOCITY TYPE N-200()
Specification : CETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND M
R
Estab
Category : dp
Grade : 2
Size :
S
1) Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 1001022307 ANTIMONY SULPHIDE BLACK JSS 6810 71
Description : 1001022307 ANTIMONY SULPHIDE BLACK JSS 6810 71()
Specification : JSS 6810-71:2008
P
Estab
2) 1001450803 RED LEAD IS 8063 1976
Description : 1001450803 RED LEAD IS 8063 1976()
Specification : IS-8063:1976
P
Estab
3) 1001774011 TRI NITRO PHLURO GLUCINOL IND ME954
Description : 1001774011 TRI NITRO PHLURO GLUCINOL IND ME954()
Specification : MAGNESIUM POWDER GR.B, PARTICLE SIZE BS SIEVE NO. AS PER CS-5035-A (A) 30 BSS = ALL PASS. (B) 44 BSS = NOT MORE THAN 15% RETAINED. (C) 100 BSS = NOT MORE THAN 15% PASS. (D) 120 BSS = ALL RETAINED. APPARENT DENSITY: 0.65 TO 0.85 g/ml & OT
Specification : ALUMINIUM-CHROMIUM MASTER ALLOY AS PER DESIGNATED AA HARDENE R H 2918 WITH CHROMIUM 5% +/- 0.5%,SI-0.30% MAX,FE-0.30% MAX OTHER TRACE ELEMENTS i.e. Zn,Pb,Sn SHOULD NOT BE EXCEED 0.10 % IN TOTAL.TOTAL IMPURITIES NOT TO EXCEED 0.70% REMINDE
Specification : ALUMINIUM-ZIRCONIUM MASTER ALLOY AS PER DESIGNATED "AA" HARDENER H 2607 WITH ZIRCONIUM-5% +/- 0.5%,SI-0.30% MAX, FE-0.30% MAX OTHER TRACE ELEMENTS i.e. Zn,Pb,Sn,Ca SHOULD NOT TO BE EXCEED 0.10% IN TOTAL. TOTAL IMPURITIES NOT TO EXCEED 0.
R
Estab
3) ALUMINIUM TITANIUM BORON MASTER ALLOY ROD IN COIL FORM 0620173002
Description : ALUMINIUM TITANIUM BORON MASTER ALLOY ROD IN COIL FORM 0620173002()
Specification : AL.-TI. BORON MASTER ALLOY ROD 9.5 MM DIA (COIL FORM) IN RUNNING LENGTH.CHEMICAL COMPOSITION AS PER DESIGNATED "AA" HARDENER H 2252 WITH TITANIUM 4.5% TO 5.5%,BORON 0.8% TO 1.2%,SI-0.20% MAX,FE-0.30% MAX,V-0.20% MAX OTHER TRACE ELEMENTS i
R
Estab
Category : ddp
Grade : 1
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) ALUMINIUM TITANIUM BORON MASTER ALLOY ROD IN COIL FORM 0620173002[06]()
Specification : AL.-TI. BORON MASTER ALLOY ROD 9.5 MM DIA (COIL FORM) IN RUNNING LENGTH.CHEMICAL COMPOSITION AS PER DESIGNATED "AA" HARDENER H 2252 WITH TITANIUM 4.5% TO 5.5%,BORON 0.8% TO 1.2%,SI-0.20% MAX,FE-0.30% MAX,V-0.20% MAX OTHER TRACE ELEMENTS i
R
Estab
Category : p
Grade : Grade III
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) ALUMINIUM COPPER MASTER ALLOY 0621773000[00]()
Specification : ALUMINIUM-COPPER MASTER ALLOY AS PER DESIGNATED AA HARDENER H 2148 WITH COPPER 47%-53%,SI-0.30% MAX,FE-0.30% MAX OTHER TRACE ELEMENTS i.e. Zn,Pb,Sn SHOULD NOT BE EXCEED 0.10% IN TOTAL. TOTAL IMPURITIES NOT TO EXCEED 0.70% REMINDER ALUMIN
Specification : ALUMINIUM-CHROMIUM MASTER ALLOY AS PER DESIGNATED AA HARDENE R H 2918 WITH CHROMIUM 5% +/- 0.5%,SI-0.30% MAX,FE-0.30% MAX OTHER TRACE ELEMENTS i.e. Zn,Pb,Sn SHOULD NOT BE EXCEED 0.10 % IN TOTAL.TOTAL IMPURITIES NOT TO EXCEED 0.70% REMINDE
R
Estab
3) ALUMINIUM TITANIUM BORON MASTER ALLOY ROD IN COIL FORM 0620173002[00]()
Specification : AL.-TI. BORON MASTER ALLOY ROD 9.5 MM DIA (COIL FORM) IN RUNNING LENGTH.CHEMICAL COMPOSITION AS PER DESIGNATED "AA" HARDENER H 2252 WITH TITANIUM 4.5% TO 5.5%,BORON 0.8% TO 1.2%,SI-0.20% MAX,FE-0.30% MAX,V-0.20% MAX OTHER TRACE ELEMENTS i
Specification : ALUMINIUM-ZIRCONIUM MASTER ALLOY AS PER DESIGNATED "AA" HARDENER H 2607 WITH ZIRCONIUM-5% +/- 0.5%,SI-0.30% MAX, FE-0.30% MAX OTHER TRACE ELEMENTS i.e. Zn,Pb,Sn,Ca SHOULD NOT TO BE EXCEED 0.10% IN TOTAL. TOTAL IMPURITIES NOT TO EXCEED 0.
Specification : ALUMINIUM-TITANIUM MASTER ALLOY (TI:B-5:1) AS PER DESIGNATED "AA" HARDENER H 2252 WITH TITANIUM 4.5% TO 5.5%,BORON 0.8% TO 1.2%,SI-0.20% MAX,FE-0.30%MAX,V-0.20% MAX OTHER TRACE ELEMENTS i.e. Zn,Mg SHOULD NOT BE EXCEED 0.10% IN TOTAL.TOTAL
Specification : ALUMINIUM-VANADIUM MASTER ALLOY AS PER DESIGNATED "AA" HARDENER H 2610 WITH VANADIUM - 7% +/- 1 %, SI - 0.30% MAX,FE-0.30% MAX, OTHER TRACE ELEMENTS i.e. Zn,Pb,Sn SHOULD NOT BE EXCEED 0.10% IN TOTAL. TOTAL IMPURITIES NOT TO EXCEED 0.70%
1) CORRUGATED PACKING BOX TO SIZE L 13 W 13 H 11 INCHES AND SHEET THICKNESS 120 GSM BOX SHALL BE HAVING 4 COMPARTMENTS INSIDE OF EQUAL SIZE BOX MUST SUSTAIN LOAD OF MIN 10 KGS[00]()
Specification : NO
E
Estab
Category : ddp
Grade : Grade I
Size :
M
1) Metal and Steel Factory
Name
Specification
Use
Status
1) 7-PLY CORRUGATED PACKING BOX AS PER MSF DRG NO.NCC-418 R1 BURSTING STRENGTH 235 N/SQ.CM(24 KG/SQ.CM) AS PER I.S 7151:9991.[14]()
Specification : 7-PLY CORRUGATED PACKING BOX AS PER MSF DRG NO.NCC-418 R1 BURSTING STRENGTH 235 N/SQ.CM(24 KG/SQ.CM) AS PER I.S 7151:9991.
1) CORRUGATED PACKING BOX TO SIZE L 13 W 13 H 11 INCHES AND SHEET THICKNESS 120 GSM BOX SHALL BE HAVING 4 COMPARTMENTS INSIDE OF EQUAL SIZE BOX MUST SUSTAIN LOAD OF MIN 10 KGS[00]()
Specification : NO
E
Estab
Category : ddp
Grade : Grade II
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CORRUGATED PACKING BOX TO SIZE L 13 W 13 H 11 INCHES AND SHEET THICKNESS 120 GSM BOX SHALL BE HAVING 4 COMPARTMENTS INSIDE OF EQUAL SIZE BOX MUST SUSTAIN LOAD OF MIN 10 KGS[00]()
Specification : NO
E
Nonestab
2) CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRAWING NO FS 2376 E FOR ST TUBE[00]()
Specification : CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO. FS-2376 E FOR ST TUBE.
S
Nonestab
3) PACKING CARTON FOR 84 MM TPT TO OFAJ DRG NO FS 2367 E[00]()
Specification : PACKING CARTON FOR 84 MM TPT TO OFAJ DRG.NO. FS-2367 E.
C
Nonestab
4) CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG NO CC 333 E[00]()
Specification : CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. CC-333 E
C
Nonestab
5) PACKING CARTON TO OFAJ DRG NO FS 986 E FOR FIN ASSLY[00]()
Specification : PACKING CARTON TO OFAJ DRG. NO. FS-986E FOR FIN ASSLY.
C
Nonestab
6) PACKING CARTON TO OFAJ DRG NO FS 987 C FOR HEAD SPIGOT[00]()
Specification : PACKING CARTON TO OFAJ DRG. NO. FS-987 C FOR HEAD SPIGOT
C
Nonestab
7) CORRUGATED FIBRE BOARD PACKING CARTON TO DRG NO FS 2389 D[00]()
Specification : CORRUGATED FIBRE BOARD PACKING CARTON TO DRG.NO. FS-2389 D.
C
Nonestab
8) CORRUGATED PAPER BOARD PACKING CARTON TO DRG NO SK 9468 A 30MM GHASHA[00]()
Specification : CORRUGATED PAPER BOARD PACKING CARTON TO DRG.NO.SK-9468/A(30MM GHASHA)
C
Nonestab
9) CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG NO CC 363 E[00]()
Specification : CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG. NO. CC-363 E.
C
Nonestab
10) CORRUGATED FIBERBOARD PACKING CARTON TO OFAJ DRG NO CC 235K[00]()
Specification : CORRUGATED FIBERBOARD PACKING CARTON TO OFAJ DRG NO CC 235K
C
Nonestab
11) FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG NO FS 2375H FOR TAIL UNIT[00]()
Specification : FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG.NO. FS-2375H FOR TAIL UNIT.
C
Nonestab
12) FIBRE BOARD PACKING CARTON WITH FITMENT TO DRG NO FS 2385 G FOR GUV 7[00]()
Specification : FIBRE BOARD PACKING CARTON WITH FITMENT TO DRG.NO.FS-2385 G FOR GUV7.
C
Nonestab
13) CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO FS 2494B[00]()
Specification : CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO.FS-2494B
C
Nonestab
14) FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG NO FS 2379G FOR TRACER BODY[00]()
Specification : FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG.NO. FS-2379G FOR TRACER BODY.
C
Nonestab
15) CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG NO CC 536B[00]()
3) BRUSH AS PER DRG No K 9003 STAR WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9003* WITH FIRMS MATERIAL
E
Nonestab
4) DRIFT AS PER DRG No K 9004 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 9004 WITH FIRM'S MATERIAL
C
Nonestab
5) EXTRACTOR TO DRG NO29P 0020STAR2 required for 0POINT315 Sporting Rifle[03]()
Specification : AS PER DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle
C
Nonestab
6) PROTECTOR TO DRG NO 29P 0050STAR required for 0POINT315 Sporting Rifle[03]()
Specification : AS PER DRG.NO. 29P 0050* required for 0.315" Sporting Rifle
C
Nonestab
7) BAND FORE SIGHT TO DRG NO 29 P 0002STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG. NO.29 P 0002* required for 0.315" Sporting Rifle
C
Nonestab
8) TRIGGER TO DRG NO 29P 0040STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle
C
Nonestab
9) CAP SLING TO DRG NO 29P 0044STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG NO.: 29P 0044* required for 0.315" Sporting Rifle
C
Nonestab
10) CATCH SAFETY TO DRG NO 29P 0046STSR2 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle
C
Nonestab
11) PIN CATCH MAGAZINE TO DRG NO 29P 0047STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle
C
Nonestab
12) SCREW GUARD TRIGGER BACK TO DRG NO 29P 0055 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG. NO.29P 0055 required for 0.315" Sporting Rifle
C
Nonestab
13) BUSH CYLINDER GAS TO D S CAT NO 3120 004656 ICR 1241 TO D C NO 23506 SA DATED 27 09 1996 FULLY FINISHED CONDITION WITH FIRMS MATERIAL[70]()
Specification : AS PER D.S. CAT. NO. 3120-004656 (ICR-1241)TO D.C. NO.23506-SA, DATED 27.09.1996 (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL)
C
Nonestab
14) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91 D S CAT No 1005 007723 D C No 22706 SA Dt 5 point 11point 94 IMPROVED VERSION FOR RIFLE 7point 62mm 1A1 TO D S C T No 1005 007504 1005 007505 1005 007506 1005 007507 1005 001593 1005 1718[70]()
Specification : AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,
E
Nonestab
15) CLAMP OP ASSEMBLE EXTRACTOR TO DRG NO F 3871 BREECH BLOCK ASSEMBLY CES ITEMS[70]()
Specification : AS PER DRG. NO. F-3871
E
Nonestab
16) CARRIER BREECH BLOCK TO DS CAT NO 1005 001578 TO DC NO 26762 SA DATED 11 06 2015 FULL FINISHED CONDITION OUT OF FIRMS MATERIAL FOR RIFLE 7POINT62 MM ICR1268[70]()
Specification : AS PER DS CAT NO 1005-001578 TO DC NO 26762 -SA DATED 11.06.2015 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1268)
C
Nonestab
17) CATCH MAGAZINE INVESTMENT CASTING DS CAT NO 1005 001539 TO DRG NO TEND 1874 ICR 1199 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO TEND.1874. (ICR-1199) (WITH FIRM'S MATERIAL)
C
Nonestab
18) BUTT FRAME ASSY AS PER DRG NO K 6006 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.K 6006
WITH FIRM’S MATERIAL
C
Nonestab
19) SIGHT ASSEMBLY AS PER DRG NO 36P 1300 STAR WITH FIRMS MATERIAL FOR UBGL BULGARIA[70]()
Specification : SIGHT ASSEMBLY AS PER DRG NO 36P 1300 STAR WITH FIRMS MATERIAL FOR UBGL BULGARIA
Specification : SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.
R
Nonestab
4) Mineral Jelly[10]()
Specification : MINERAL JELLY TO SPECIFICATION JSS-8030-09-2016,REV. NO.3.
R
Nonestab
5) Di Amyl Pthalate[10]()
Specification : DIAMYL PHTHALATE CONFORMING TO SPECN NO.IND/ME/872 : 2015 DC - 5383-ME, DT. 21.12.2015.
R
Nonestab
6) Wax Special No 6 Grade I[10]()
Specification : White Colour To Specn.No.CS-5301-B
R
Nonestab
7) TAPE ADHESIVE PRES SENSITIVE[15]()
Specification : PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 20
R
Nonestab
8) CANDELILLA WAX[10]()
Specification : CANDELILLA WAX AS PER SPECN.JSS-NO.9160-08:2016 (REV NO.2). )
R
Nonestab
9) ACETIC ANHYDRIDE FOR HMX PLANT1[10]()
Specification : ACETIC ANHYDRIDE:PURITY= 97.5% MIN, COLOUR= 10 APHA MAX AND SUSPENDED MATTER= NIL. AS PER IS:1235 1988 Reaffirmed 2015 Revi 1
R
Nonestab
10) CALCIUM CARBONATE CHALK CALCIT[10]()
Specification : CALCIUM CARBONATE FOR PROPELLANT AS PER IS: 7633-1982 REAFFIRMED 2016 GADE-2 CHALK CALCITE.TO SPECN.: PACAL-'F'VARIETY.PARAMETERS OF PACAL SPECN.TO BE TESTED AS PER SPECIFIED METHOD.
R
Nonestab
11) SURGICAL HAND GLOVES S 7 half inch[25]()
Specification : SURGICAL HAND GLOVES SIZE 7 1/2" (seven and half) ISI MARKED, NO. IS-4148 (DIALOMATIC)
R
Nonestab
12) DI ETHYL PHTHALATE[10]()
Specification : DIETHYL PHTHALATE CONFORMING TO SPECN IND/ME/873(A)(2015)- DC NO.6103-ME DATED 06.08.2019
R
Nonestab
13) ZINC STEARATE[10]()
Specification : ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2021 (REV. NO. 3).
R
Nonestab
14) Di Phenyl Amine[10]()
Specification : JSS:6810-129-2020 (Rev.No.4), DC No.6250-ME dated 18.09.2021
R
Nonestab
15) Recrystaline Hexamine[10]()
Specification : Recrystallised Hexamine as per B.F. Specification 1.33 dated 29.09.2023 having Total Hexamine content 99.5% (min) & pH 9.5 (max)
Specification : TRICHLOROETHYLENE,TECH. TYPE 2 SPECN:-IS-245-1988 (3rd REV) (AMENDMENT NO.1) OF DEC.1995 AND AMEND.NO.2 OF MAY 2002.
R
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) POTASSIUM NITRATE[10]()
Specification : POTASSIUM NITRATE GR I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION IN CRYSTAL FORM PARTICLE SIZE LESS THAN OR EQUAL TO 10 MICRON TO SPECN:- IS 301-1982 (2ND REV) (REAFFIRMED 2003) DC NO. 3810-ME DT. 05/05/04.
R
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) Micro Crystalline Wax IND ME 869 PRO LF No 1020870813[10]()
Specification : ZINC OXIDE 63 MICROMETER IS SIEVE "ZINC OXIDE SHOULD BE MANUFACTURED FORM ZINC SLAB" TO SPECN: JSS-6810-82:2011 REVISION NO-2).
R
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) Lead nitrate Normal item code1001450037[10]()
Specification : LEAD NITRATE (NORMAL) TO JSS 6810-80-2011 (REV NO. 2) DC NO. 5048 -ME DT. 15/11/2011 ALONGWITH FOLLOWING PARAMETERS: APPERANCE : PURE WHITE , CRYSTALLINE, PURITY: MIN. 98.5%, COPPER: MAX. 0.001%, INSOLUBLE IN WATER: MAX 0.02%, MAKE:SQ GRA
R
Nonestab
2) DIAMMONIUM HYDRO ORTHO PHOSPHATE AR ITEM CODE 1001131903[10]()
Specification : DI AMMONIUM HYDRO ORTHO PHOSPHATE GRADE AND MAKE EXCELLAR GRADE OF QUALIGEN OR GR GRADE OF E-MERCK OR ANALAR GRADE OF BDH OR AR GRADE OF RANABAXY OR GR GRADE OF LABA OR AR GRADE OF S.D. FINE OR AR GRADE OF CDH ONLY ACCEPTABLE.
