1) BOX C-235 (STEEL) WITH 10 MM HOLES (22 NOS.) (6570190100)[65]()
Specification : BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERAL
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)
Description : BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)()
Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bhandara
[ENR Registration]
Name
Specification
Use
Status
1) M S PLATE SZ 3 MM PHOSPATED
Description : M S PLATE SZ 3 MM PHOSPATED()
Specification : MS PLATE OF SIZE 126 + 1.0-0.0 X 126 + 1.0-0.0X 3MM THICK (PHOSPATED) TO SPEC IS : 2062-1994 OF ANY GRADE, CORNER RADIUS 3R. ALL SHARP CORNERS TO BE REMOVED. TESTING TO BE DONE FOR TENSILE & ELONGATION. HEMRL DRG NO 1517- DETL NO. 3
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Boxes Fibre Board Rigid Corrugated Triple Wall 7 Ply of size-700 mm X 450 mm X 400 mm[14]()
Specification : CQA(GS)US/460 WITH AMENDMENT TYPE B FLUTES AT BOTH CORE & OUTER WALL IN PLACE OF TYPE A AT OUTER WALL & TYPE B AT CORE WALL IN CLAUSE 13.0(TEST AND TEST METHOD) OF RELEVANT SPECIFICATION.
3) JACK 15 T BB 82 FABRICATED TO DRG NO IMGA 0057 B ACK 15 T BB 82 FABRICATED[00]()
Specification : JACK 15 T (BB-82)(FABRICATED) TO DRG.NO.IMGA-0057/B. ACK 15 T (BB-82)(FABRICATED)
C
Nonestab
4) MILD STEEL PLATE TO GERMAN SPECIFICATION M ST 52 point 3 SIZE 210 MM X 8 MM X 325 MM LENGTH TENSILE STRENGTH 52 to 62 KG per MM SQUARE OR LATEST AMENDED NOMENCLATURE AS ON T E DATE[00]()
Specification : MILD STEEL PLATE TO GERMAN SPECIFICATION M.ST.-52.3,SIZE: 210 MM X 8 MM X 325 MM LENGTH. (TENSILE STRENGTH 52-62 KG/MM SQUARE) OR LATEST AMENDED NOMENCLATURE AS ON T.E. DATE
R
Nonestab
5) MILD STEEL PLATE TO GERMAN SPECIFICATION M ST 52 point 3 SIZE 201 MM X 8 MM X 132 MM LENGTH TENSILE STRENGTH 52 to 62 KG per MM SQUARE[00]()
Specification : MILD STEEL PLATE TO GERMAN SPECIFICATION M.ST.-52.3,SIZE; 201 MM X 8 MM X 132 MM LENGTH. (TENSILE STRENGTH 52-62 KG/MM SQUARE)
R
Nonestab
6) PIN CAT 1255 PIN 41 774 X 90MM LONG TO DRG NO IMPD0988[00]()
Specification : PIN CAT-1255(PIN 41.774 X 90MM LONG) TO DRG. NO. IMPD0988.
C
Nonestab
7) LOCKING BOLT TO DRG NO CAT 1376 C WITHOUT CUP SPRING[00]()
Specification : LOCKING BOLT TO DRG.NO.CAT-1376/C WITHOUT CUP SPRING
C
Nonestab
8) SPIKE BRIDGING O P PIN TO DRG NO IMPD 0543[00]()
Specification : SPIKE,BRIDGING (O.P.PIN) TO DRG NO IMPD-0543.
C
Nonestab
9) STEEL PLATE OF SIZE 20 MM THICK X 175 MM WIDE X 900 MM LENGTH HAVING PROPERTIES OF UTS 52 KG per MM SQ MIN YIELD STRENGTH 36 KG F per MM SQ MIN percent ELONGATION 22 percent ON GAUGE LENGTH 5 point 65 SQUARE ROOT AREA[00]()
Specification : STEEL PLATE OF SIZE:-20 MM THICK X 175 MM WIDE X 900 MM LENGTH HAVING PROPERTIES OF UTS 52 KG/MM SQ.(MIN). YIELD STRENGTH 36 KG F/MM SQ. (MIN)% ELONGATION 22 % ON GAUGE LENGTH 5.65 SQUARE ROOT AREA
R
Nonestab
10) PIN DIAMETER 12 CAT 1256 PIN DIA 12 X 75MM LONG TO DRG NO IMPD0989[00]()
Specification : PIN DIAMETER 12 CAT-1256(PIN DIA 12 X 75MM LONG) TO DRG. NO.IMPD0989.
C
Nonestab
11) SPLIT COTTER PIN DIA 4 X 20 COTTER SPLIT PIN MILD STEEL DIA 4 X 20 MM LONG TO DRG NO IMPD 0990[00]()
Specification : SPLIT COTTER PIN DIA. 4 X 20 (COTTER SPLIT PIN MILD STEEL DIA.4 X 20 MM LONG) TO DRG. NO. IMPD 0990.
C
Nonestab
12) SPLIT COTTER PIN DIAMETER 5 OF SR NO 2 TO DRG NO IMPD 0986[00]()
Specification : SPLIT COTTER PIN DIAMETER 5 OF SR. NO.2 TO DRG. NO.IMPD 0986.
C
Nonestab
13) ADAPTER SLEEVE 8 X 45 ADAPTER DIA 8 X 45MM LONG TO DRG NO IMPD 0982[00]()
Specification : ADAPTER SLEEVE 8X45(ADAPTER DIA.8 X 45MM LONG) TO DRG. NO.IMPD 0982.
C
Nonestab
14) ECENTRIC BOLT TO CQA EE DRG NO CAT NO 1403 C DC NO ES 14 224 DT 3 10 84[00]()
Specification : ECENTRIC BOLT TO CQA(EE)DRG.NO.CAT NO.1403/C .DC.NO.ES/14/224 DT.3.10.84.
C
Nonestab
15) LOCK NUT M 16 TO DIN 7967 DULY GALV AND CHROM[00]()
Specification : LOCK NUT M-16 TO DIN 7967 DULY GALV. & CHROM.
C
Nonestab
16) CONE HANDLE CAT PART NO 14 5340 001021 TO DRG NO ISK 0439[00]()
Specification : CONE HANDLE CAT.PART NO.14/5340-001021 TO DREG.NO.ISK-0439.
C
Nonestab
17) CYLINDRICAL PIN 8 M6 X 32 DIN 7 TO DRG NO ISK 0459[00]()
Specification : CYLINDRICAL PIN 8 M6 X 32 DIN-7 TO DRG. NO. ISK-0459.
C
Nonestab
18) PIN FOR LOCKING CAT 1102 PIN LOCK SETTING TO DRG NO IMPD 0984[00]()
Specification : PIN FOR LOCKING CAT-1102(PIN LOCK SETTING) TO DRG. NO. IMPD 0984.
C
Nonestab
19) CARRYING HANDLE CAT NO 14 5120 002902 TO DRG NO 23902[00]()
Specification : CARRYING HANDLE CAT.NO.14/5120-002902 TO DRG NO 23902
C
Nonestab
20) PIN DIAMETER 20 C11 CAT 1153 PIN DIA 20 X 220 MM LENGTH TO DRG NO IMPD 0985[00]()
Specification : PIN DIAMETER 20 C11 CAT-1153(PIN DIA. 20 X 220 MM LENGTH) TO DRG. NO. IMPD 0985.
C
Nonestab
21) OBLIQUE COUPLING CAT NO 14 5420 000016 TO DRG NO 23719[00]()
Specification : OBLIQUE COUPLING CAT.NO.14/5420-000016 TO DRG NO 23719
C
Nonestab
22) WASHER 13 DIA FOR SR NO 1 TO DRG NO IMPD 0991[00]()
Specification : WASHER 13 DIA. FOR SR. NO. 1 TO DRG. NO. IMPD 0991.
C
Nonestab
23) STRAP CAT 1150 TO DRG NO IMPD 0981[00]()
Specification : STRAP(CAT-1150) TO DRG.NO.IMPD 0981
C
Nonestab
24) LOCKING LEVER JM LEVER CAT NO14 5120 002904 TO DRG NO 24219[00]()
Specification : LOCKING LEVER (JM LEVER) CAT. NO.14/5120-002904 TO DRG NO 24219
C
Nonestab
25) PIN FOR LOCKING CAT 1101 BOLT CSK M10 X 35 TO DRG NO IMPD 0983[00]()
Specification : PIN FOR LOCKING CAT -1101(BOLT CSK M10 X 35) TO DRG. NO.IMPD 0983.
C
Nonestab
26) DUBO RETAINING RING FORM 303 CAT 1439 RING RETAINING NYLON 8 POINT 1 ID X 14 OD X 3 POINT 3 MM THICK TO DRG NO IMPD 0998[00]()
Specification : DUBO RETAINING RING FORM 303 CAT-1439 (RING RETAINING NYLON 8.1 ID X 14 OD X 3.3MM THICK) TO DRG. NO. IMPD 0998.
C
Nonestab
27) AXLE GUARD CAT 1326 GUARD AXLE TO DRG NO IMPD 0992[00]()
1) PRE CUP COMPONENT ANNEALED BLANK FOR 125 MM SCCC BASE TO OFAJ DRG NO CC 471 D[00]()
Specification : PRE CUP COMPONENT (ANNEALED BLANK) FOR 125 MM SCCC (BASE) TO OFAJ DRG. NO. CC-471 D.
C
Nonestab
2) MOUTH PROTECTOR TO DRG NO CC 509 A FOR 125 MM SCCC METALIC BASE[00]()
Specification : MOUTH PROTECTOR TO DRG. NO. CC-509 A (FOR 125 MM SCCC METALIC BASE)
C
Nonestab
3) PRE CUP BLANK ANNEALED TO DRG NO CC 508D FOR 76 point 2 MM CARTG CASE[00]()
Specification : PRE CUP BLANK (ANNEALED) TO DRG.NO. CC-508D (FOR 76.2 MM CARTG. CASE)
C
Nonestab
4) CONVERSION OF ROLLED STEEL STRIP WITH SIZE 21 point 2 MM THICK X 230 MM WIDTH INTO CIRCULAR BLANK OF DIA 198 MM BY CNC PLASMA CUTTING FOR 76 point 2 MM CARTRIDGE CASE[00]()
Specification : CONVERSION OF ROLLED STEEL STRIP WITH SIZE: 21.2 MM THICK X 230 MM WIDTH INTO CIRCULAR BLANK OF DIA 198 MM BY CNC PLASMA CUTTING (REFERENCE DRG NO.CC-417E) FOR 76.2 MM CARTRIDGE CASE
R
Nonestab
5) CONVERSION OF ROLLED STEEL FLAT WITH SIZE 23 MM THICKNESS X 286 MM WIDTH X 1430 MM LENGTH HIGH GRAD MILD KILLED STEEL OF GRADE 11 IOA SPECIFICATION TO GOST B19032 73 INTO CERCULAR BLANK BY CNC PLASMA CUTTING FOR 76 point 2 MM CARTRIDGE CASE[00]()
Specification : CONVERSION OF ROLLED STEEL FLAT WITH SIZE:23(+2)MM THICKNESS X 286(+5)MM WIDTH X 1430(+100)MM LENGTH HIGH GRAD MILD KILLED STEEL OF GRADE 11 I-OA SPECIFICATION TO GOST B19032-73 INTO CERCULAR BLANK BY CNC PLASMA CUTTING (REFERENCE DRG.NO.
R
Nonestab
6) CONVERSION OF ROLLED STEEL FLAT WITH SIZE 21 point 2 MM T X 230 MM W X 1840 MM L HIGH GRADE MILD KILLED STEEL OF GRADE 11 IOA SPECN TO GOST B19032 73 INTO CIRCULAR BLANK BY CNC PLASMA CUTTING FOR 125MM SCCC CA[00]()
Specification : CONVERSION OF ROLLED STEEL FLAT WITH SIZE:21.2 +0.5MM (T) X 230 +/-0.5MM (W) X 1840 +/-5MM (L) HIGH GRADE MILD KILLED STEEL OF GRADE 11I-OA SPECN.TO GOST B19032-73 INTO CIRCULAR BLANK BY CNC PLASMA CUTTING (REFERENCE DRG.NO.CC-303Q) FOR 1
R
Nonestab
7) CONVERSION OF ROLLED STEEL FLAT WITH SIZE 23 MM THICKNESS X 286 MM WIDTH X 1430 MM LENGTH HIGH GRAD MILD KILLED STEEL OF GRADE 11 IOA SPECIFICATION TO GOST B19032 73 INTO CERCULAR BLANK BY CNC PLASMA CUTTING REF DRG NO CC 303 Q FOR 125MM SCCC[00]()
Specification : CONVERSION OF ROLLED STEEL FLAT WITH SIZE:23(+2)MM THICKNESS X 286(+5)MM WIDTH X 1430(+100)MM LENGTH HIGH GRAD MILD KILLED STEEL OF GRADE 11 I-OA SPECIFICATION TO GOST B19032-73 INTO CERCULAR BLANK BY CNC PLASMA CUTTING (REFERENCE DRG.NO.
R
Nonestab
8) CERCULAR BLANK SIZE 239 point 5 MM DIA FOR SLUG OF AK 100 STEEL CARTRIDGE CASE TO DRG NO CC 548 AFTER CONVERSION AGAINST ITEM CODE W472017002[00]()
Specification : CERCULAR BLANK SIZE:239.5MM +0.5MM DIA FOR SLUG OF AK-100 STEEL CARTRIDGE CASE TO DRG.NO.CC-548 AFTER CONVERSION AGAINST ITEM CODE:W472017002.
C
Nonestab
9) TRANSIT PLUG FOR CC AK 100 AS PER DRG NO CC100 SK 2105 A[00]()
Specification : TRANSIT PLUG FOR CC AK-100 AS PER DRG.NO.CC100/SK/2105/A
C
Nonestab
Category : p
Grade : Grade III
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]()
Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001
R
Estab
Category : ddp
Grade : Grade II
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) Code 91 & 93 Stowage/Mounting of SPTA/Racks in Hull & Turret[62]()
Specification : Code 91 & 93 Stowage/Mounting of SPTA/Racks in Hull & Turret
E
Nonestab
Category : p
Grade : Grade I
Size :
M
3024
M/s KNDS Ammno Italy S.p.A
VIA ARIANA KM.5, 2 COLLEFRRO ROME ITALY
PIN1 : 482005
Phone No. : 07612743368
1) SET OF INNER FILLING INSULATION MATERIAL A AND B INNER JACKET THERMO PLASTIC POLYMER[21]()
Specification : SET OF INNER FILLING INSULATION MATERIAL 'A' & 'B' (INNER JACKET) THERMO PLASTIC POLYMER - MATERIAL 'A' - 60GSM, WIDTH 150 CM (MIN.), CLO VALUE > 1.0 AND MATERIAL 'B' - 100 GSM WIDTH 150 CM (MIN.), CLO VALUE >2.0
SPECIFICATION :- AS P
R
Estab
2) INNER FILLING INSULATION MATERIAL OUTER JACKET THERMO PLASTIC POLYMER 110 GSM WIDTH 150 CM MIN[21]()
Specification : INNER FILLING INSULATION MATERIAL (OUTER JACKET) THERMO PLASTIC POLYMER 110 GSM WIDTH 150 CM. (MIN.)
SPECIFICATION :- AS PER APPENDIX 'C' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) COMPLETE SUB ASSEMBLY OF OUTER AND INNER JACKET OF COAT ECC IMP VER WITH ALL INPUT MATERIAL AND FABRICATION OF WIND CHEATER[21]()
Specification : COMPLETE SUB-ASSEMBLY OF OUTER AND INNER JACKET OF COAT ECC IMP. VER. (WITH ALL INPUT MATERIAL) AND FABRICATION OF WIND CHEATER
AS PER COAT ECC IMP. VER. SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6 AND AS PER ANN
1) CARBON STEEL ROUND BARS TO SPECN BS 970 PT I 1983 GR 080M40 IN HOT ROLLED AND COLD DRAWN CONDITION IN STRAIGHT LENGTH OF 3 MTRS 15 PERCENT MAX SHORTS DOWN TO 2 TO 3 METRES PERMITTED SIZE 30 00 MINUS 0 052 MM DIA[01]()
Specification : CARBON STEEL ROUND BARS. TO SPECN. BS:970-PT.I-(1983) GR.080M40 IN HOT ROLLED +COLD DRAWN CONDITION IN STRAIGHT LENGTH OF 3 MTRS. (15 % MAX SHORTS DOWN TO 2-3 METRES PERMITTED ) SIZE: 30.00 - 0.052 MM DIA.
R
Estab
2) CARBON STEEL BRIGHT ROUNDS TO SPECN BS 970 PT I 1983 GRADE 080M40 CONDITION NORMALIZED IN STRAIGHT LENGTH OF 3 METERS WITH 10PERCENT SHORTS DOWN TO 2 3 METERS SIZE 35 0 POINT1 MM DIA[00]()
Specification : CARBON STEEL BRIGHT ROUNDS TO SPECN BS: 970 PT.I-1983 GRADE 080M40 CONDITION NORMALIZED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METERS SIZE: 35.00 – 0.1 MM DIA
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND TO SPECN BS 970 PT I 1983 GR 070M20 HAVING STRAIGHT LENGTH OF 3 MTRS SIZE 25 POINT 4 MINUS 0 POINT 1 MM DIA[00]()
Specification : CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUNDS TO SPECN BS 970 1983 GRADE 070M20 IN NORMALISED CONDITION STRAIGHT LENGTH OF 3 METERS SIZE 19 MINUS 0 POINT 08 MM DIA[00]()
Specification : BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUNDS TO SPECN:BS: 970-1983 GRADE 070M20 IN NORMALISED CONDITION STRAIGHT LENGTH OF 3 METERS SIZE 19.00 - 0.08 MM DIA
1) CARBON STEEL ROUND BARS TO SPECN BS 970 PT I 1983 GR 080M40 IN HOT ROLLED AND COLD DRAWN CONDITION IN STRAIGHT LENGTH OF 3 MTRS 15 PERCENT MAX SHORTS DOWN TO 2 TO 3 METRES PERMITTED SIZE 30 00 MINUS 0 052 MM DIA[01]()
Specification : CARBON STEEL ROUND BARS. TO SPECN. BS:970-PT.I-(1983) GR.080M40 IN HOT ROLLED +COLD DRAWN CONDITION IN STRAIGHT LENGTH OF 3 MTRS. (15 % MAX SHORTS DOWN TO 2-3 METRES PERMITTED ) SIZE: 30.00 - 0.052 MM DIA.
1) CARBON STEEL BRIGHT ROUNDS TO SPECN BS 970 PT I 1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10 PERCENTAGE SHORTS DOWN TO 2 TO 3 METRES SIZE 35 MM DIA[00]()
Specification : CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.
R
Estab
2) CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED AND HEAT TREATED TO CONDITION R TO SPECN BS970 PART I 1983 GRADE 410S21 EN56A SIZE 7 MINUS 0 POINT 08 MM DIA[00]()
Specification : CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN. BS970 (PART-I)1983 GRADE 410S21 (EN56A) WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 -
R
Estab
3) CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND TO SPECN BS 970 PT I 1983 GR 070M20 HAVING STRAIGHT LENGTH OF 3 MTRS SIZE 25 POINT 4 MINUS 0 POINT 1 MM DIA[00]()
Specification : CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA
R
Estab
4) BRIGHT FINISHED CHROMIUM RUST RESISTING STEEL ROUNDS TO SPECN BS 970 PT I 1983 GRADE 410S21 HEAT TREATED TO R CONDITION HAVING STRAIGHT LENGTH OF 3 MTRS SIZE 5 POINT 5 MINUS 0 POINT 08 MM DIA[00]()
Specification : BRIGHT FINISHED CHROMIUM RUST RESISTING STEEL ROUNDS TOSPECN.BS:970 PT.I/1983 GRADE 410S21 HEAT TREATED TO "R"CONDITION HAVING STRAIGHT LENGTH OF 3 MTRS.WITH 10% SHORTS DOWN TO 2-3 MTRS SIZE : 5.5 -0.08 MM DIA.
R
Estab
5) BRIGHT FINISHED STEEL BAR TO SPECN BS 970 PART I 1983 GRADE 070M20IN NORMALISED CONDITION IN STRAIGHT LENGTH OF 3 METERS SIZE 19 MINUS 0 POINT 08 MM DIA()
BRIGHT FINISHED STEEL BAR TO SPECN BS 970 PART I 1983 GRADE 070M20IN NORMALISED CONDITION IN STRAIGHT LENGTH OF 3 METERS SIZE 19 MINUS 0 POINT 08 MM DIA
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)
Description : BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)()
Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 6571747622 BOX TIN FOR STORING DET
Description : 6571747622 BOX TIN FOR STORING DET()
Specification : BOX TIN FOR STORING DETONATORS TO DRG.NO.FQ/II/200
C
Estab
2) 6571442459 CARRIER 13A (BG) TO ISV 488A
Description : 6571442459 CARRIER 13A (BG) TO ISV 488A()
Specification : SPECN. NO. IA 1169
C
Estab
3) 6571341952 CARRIER 13 A (OG), ISV 488-A
Description : 6571341952 CARRIER 13 A (OG), ISV 488-A()
Specification : SPECN.NO. IA 1169
C
Estab
4) 6572900000 CARRIER 6A L STEEL DRG NO ISV 354A
Description : 6572900000 CARRIER 6A L STEEL DRG NO ISV 354A()
Specification : CARRIER 6A/L STEEL COMPLETE WITH ALL FITMENTS DRAWING NO.ISV354-A DC-37214-A,SPECN. NO. IA-1169(N) DC 35576-A, SHOULD BEPAINTED WITH READY MXD PAINT AIR DRYING MATT FINISH SPRAYINGFOR GENERAL PURPOSE "OLIVE GREEN R.M.A.R. MATT FINISH GP T
C
Estab
5) 6570950402 CONTAINER 3RK 33 METAL FOR 125MM
Description : 6570950402 CONTAINER 3RK 33 METAL FOR 125MM()
Specification : CONTAINER CONSISTING OF THE FOLLOWING ITEMS
1.BODY DET. NO. 010
2. COVER DET.NO. 020
3.BOLT DET. NO. 030
4. FORK DET.NO 005
C
Estab
6) 6432300008 MS PLATE 3MM TH PHOS ERA
Description : 6432300008 MS PLATE 3MM TH PHOS ERA()
Specification : IS:2062-1994
C
Estab
7) 2029992283 RING SECURING ISV 1122
Description : 2029992283 RING SECURING ISV 1122()
Specification : SECURING RING,DRG.PART NO.ISV-1122, DC 35975-A.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bhandara
[ENR Registration]
Name
Specification
Use
Status
1) M S PLATE SZ 3 MM PHOSPATED
Description : M S PLATE SZ 3 MM PHOSPATED()
Specification : MS PLATE OF SIZE 126 + 1.0-0.0 X 126 + 1.0-0.0X 3MM THICK (PHOSPATED) TO SPEC IS : 2062-1994 OF ANY GRADE, CORNER RADIUS 3R. ALL SHARP CORNERS TO BE REMOVED. TESTING TO BE DONE FOR TENSILE & ELONGATION. HEMRL DRG NO 1517- DETL NO. 3
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)
Description : BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)()
Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) WASHER FOR PART NO 25 TO CQA AMMN DRG NO 3 016919 DETAIL 50 DC 1 37284 A Dt 6 7 2011
Description : WASHER FOR PART NO 25 TO CQA AMMN DRG NO 3 016919 DETAIL 50 DC 1 37284 A Dt 6 7 2011()
Specification : WASHER FOR PART NO.25 TO CQA (AMMN.) DRG.NO. 3-016919 DETAIL50 DC(1) 37284-A Dt.6.7.2011
C
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) TIN BOX FOR STORAGE OF DETONATOR AND CAPS
Description : TIN BOX FOR STORAGE OF DETONATOR AND CAPS()
