List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
3121 RIGHT TIGHT FASTNERS PRIVATE LIMITED
F-45-47, MIDC,SATPUR, MIDC ROAD NASHIK MAHARASHTRA
PIN1 : 422007
Phone No. : 02536102037
GSTIN : 27AADCR3024M1ZB 		MUMR14786C

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) SET SCREW M6X1X20 PART NO L2010620 Description : SET SCREW M6X1X20 PART NO L2010620() Specification : SET SCREW M6X1X20 GALVD & YELLOW PASSIVATED PART NO L2010620 IS:1364-1992 PT.2 P.8.8 C Estab
Category : p
Grade : 3
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) COLLAR TYPE HEX HEAD BOLT[90]() Specification : COLLAR TYPE HEX HEAD BOLT M 14 X 1.5 X 50 HIGH TENSILE GRADE-10.9 C Estab
2) HEX HEADED BOLT M 12 X 1.75 X 50 MM[90]() Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT C Estab
3) HEX HEADED BOLT 1/2[90]() Specification : HEX HEADED BOLT 1/2" BSF 1 1/2" HIGH TENSILE BOLT C Estab
4) HEX HEADED SCREW M12X25MM[90]() Specification : HEX HEADED SCREW M12X25MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8-PL AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT. C Estab
5) HEX HEADED SCREW M12X1.75X30MM[90]() Specification : HEX HEADED SCREW M12X1.75X30MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8- AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT. C Estab
6) HEX HEAD HIGH TENSILE BOLT[90]() Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL C Estab
7) HEX HD NUT[90]() Specification : HEX HD NUT M20 IS:1363 GR-8 GALV. & YELLOW PASSIVATED C Estab
8) HEX NUT M16 X 2 IS1364[90]() Specification : HEX NUT M16 X 2 IS:1364-(PART-3)-8 C Estab
9) HEX NUT M10 TO IS 1364[90]() Specification : HEX NUT M10 TO IS:1364 (PART-III)-8 C Estab
10) HEX NUT M8 IS 1364[90]() Specification : HEX NUT M8-IS:1364(PART-3)-8 C Estab
11) HEX HEAD NUT M12 TO IS1364[90]() Specification : HEX HEAD NUT M12 TO IS:1364 (PART-3)-8-BL C Estab
12) HEX HEAD SCREW M8X30[90]() Specification : HEX HEAD SCREW M8X30 IS:1364 (PART-1)-10.9 C Estab
13) HEX BOLT IS 1364[90]() Specification : HEX BOLT M20x1.5x40 IS:1364 GRADE 8.8 GLAVANISHED & YELLOW C Estab
14) HEX HEADED BOLT M6 1 1 12 MM[90]() Specification : HEX HEADED BOLT M6X1X12 MM TO IS:1364 (PART-1) 8.8-BL C Estab
15) HEX HEADED BOLT M 20 45 MM[90]() Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT C Estab
16) HIGH TENSILE HEX BOLT[90]() Specification : HIGH TENSILE HEX. BOLT M20X2.5X55 MM LENGTH-IS:1364(PART-2)-8.8 -BL WITH HEX. NUT M20 IS:1364-(PART-3)-8-BL WITH SPRING WASHER A20 IS:3063 Cd PLATED BOLT NUT C Estab
17) HEX NUT M6[90]() Specification : HEX NUT M6 TO IS:1364-A (PART-III) C Estab
18) HEX HEADED BOLT M12 60[90]() Specification : HEX HEADED BOLT M12 X 60 MM TO IS:1364(PART-1)-8-8-PL C Estab
19) HEX HD NUT M5 IS1363[90]() Specification : HEX HD NUT M5 IS:1363 C Estab
20) HEX HD BOLT M14 35 IS 1364[90]() Specification : HEX HD BOLT M14X35 IS:1364 GRADE -8.8 C Estab
21) HEX BOLT M 20 120 MPV[90]() Specification : HEX BOLT M20X120 TO IS:1364 FOR MPV GRADE 8.8 C Estab
22) BOLT M 12 20 WITH NUT[90]() Specification : BOLT M12X20 WITH NUT & SPG WASHER GRADE-8.8 C Estab
23) HEX HEADED SCREW M 8 40 MM[90]() Specification : HEX HEADED SCREW M8X40 MM TO IS:1364 (PART-2)-8.8-PL-WITH HEX NUT M8 IS:1364 (PART-3)-8-PL C Estab
24) HEX HEADED SCREW M 8 25[90]() Specification : HEX HEADED SCREW M8X25 MM IS:1364 (PART-2)-8.8-PL C Estab
25) HEX HEADED BOLT M14 2 35 MM[90]() Specification : HEX HEADED BOLTM14X2X35MM TO IS:1364(PART-2)8.8-BL C Estab
26) HEX HD BOLT M12 45 IS 1364[90]() Specification : HEX HD BOLT M12X45 IS:1364 GRADE 8.8 GALVANISHED 7 YELLOW PASSIVATED C Estab
27) HEX BOLT M 12 40 IS 1364[90]() Specification : HEX BOLT M12X40 IS:1364 GRADE 8.8 GALVANISHED & YELLLOW PASSIVATED C Estab
28) M20 TWO POINT FIVE 55 MM HEX BOLT[90]() Specification : M20X2.5X55 MM HEX BOLT GRADE-8.8 GALV & YELLOW PASSIVATED C Estab
29) HEX BOLT M20X50 IS 1364[90]() Specification : HEX BOLT M20X50 IS:1364 GRADE 8.8 GALVANISHED & YELLOW PASSIVATED C Estab
30) HEX BOLT M 12 30 IS 1364[90]() Specification : HEX BOLT M12X30 IS:1364 GRADE 8.8 GALVANISED & YELLOW PASSIVATED C Estab
31) NUT M12 CLEEVE LOC NUT[90]() Specification : NUT M12 CLEEVE LOC NUT C Estab
32) ASSY WHEEL NUT M22[90]() Specification : ASSY. WHEEL NUT M22×2.5 PT.NO.F3569510 C Nonestab
33) BOLT M10 70[90]() Specification : BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014 C Nonestab
34) FLANGE SCREW HEX[90]() Specification : FLANGE SCREW HEX M16X1.5X40 LONG-GR.12.9 C Nonestab
35) LPTA U Bolt with Nut[90]() Specification : U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH C Nonestab
36) SPECIAL SCREW M14 2 40[90]() Specification : SPECIAL SCREW -X 3534511 V1 SIZE M14×2×40 IPL NO. 109/F(XL) ASSY C Nonestab
37) SPECIAL SCREW M14 2 60[90]() Specification : SPECIAL SCREW SIZE M14×2×60 IPL NO. 110/FXL PT. NO. X3534611 V1 DRG NO. X3534511 V1 C Nonestab
38) SPECIAL SCREW M16 2 50[90]() Specification : SPECIAL SCREW PT. NO. X3535311-V1 SIZE M16×2×50 DRG NO. X3534511 -V1 C Nonestab
39) WHEEL BOLT M 22[90]() Specification : WHEEL BOLT M22×2.5 PART NO. F-3569310-C C Nonestab
Category : p
Grade : Grade III
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) COLLAR TYPE HEX HEAD BOLT[90]() Specification : COLLAR TYPE HEX HEAD BOLT M 14 X 1.5 X 50 HIGH TENSILE GRADE-10.9 C Estab
2) HEX HEADED BOLT M 12 X 1.75 X 50 MM[90]() Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT C Estab
3) HEX HEADED BOLT 1/2[90]() Specification : HEX HEADED BOLT 1/2" BSF 1 1/2" HIGH TENSILE BOLT C Estab
4) HEX HEADED SCREW M12X25MM[90]() Specification : HEX HEADED SCREW M12X25MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8-PL AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT. C Estab
5) HEX HEADED SCREW M12X1.75X30MM[90]() Specification : HEX HEADED SCREW M12X1.75X30MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8- AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT. C Estab
6) HEX HEAD HIGH TENSILE BOLT[90]() Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL C Estab
7) HEX HD NUT[90]() Specification : HEX HD NUT M20 IS:1363 GR-8 GALV. & YELLOW PASSIVATED C Estab
8) HEX NUT M16 X 2 IS1364[90]() Specification : HEX NUT M16 X 2 IS:1364-(PART-3)-8 C Estab
9) HEX NUT M10 TO IS 1364[90]() Specification : HEX NUT M10 TO IS:1364 (PART-III)-8 C Estab
10) HEX NUT M8 IS 1364[90]() Specification : HEX NUT M8-IS:1364(PART-3)-8 C Estab
11) HEX HEAD NUT M12 TO IS1364[90]() Specification : HEX HEAD NUT M12 TO IS:1364 (PART-3)-8-BL C Estab
12) HEX HEAD SCREW M8X30[90]() Specification : HEX HEAD SCREW M8X30 IS:1364 (PART-1)-10.9 C Estab
13) HEX BOLT IS 1364[90]() Specification : HEX BOLT M20x1.5x40 IS:1364 GRADE 8.8 GLAVANISHED & YELLOW C Estab
14) HEX HEADED BOLT M6 1 1 12 MM[90]() Specification : HEX HEADED BOLT M6X1X12 MM TO IS:1364 (PART-1) 8.8-BL C Estab
15) HEX HEADED BOLT M 20 45 MM[90]() Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT C Estab
16) HIGH TENSILE HEX BOLT[90]() Specification : HIGH TENSILE HEX. BOLT M20X2.5X55 MM LENGTH-IS:1364(PART-2)-8.8 -BL WITH HEX. NUT M20 IS:1364-(PART-3)-8-BL WITH SPRING WASHER A20 IS:3063 Cd PLATED BOLT NUT C Estab
17) HEX NUT M6[90]() Specification : HEX NUT M6 TO IS:1364-A (PART-III) C Estab
18) HEX HEADED BOLT M12 60[90]() Specification : HEX HEADED BOLT M12 X 60 MM TO IS:1364(PART-1)-8-8-PL C Estab
19) HEX HD NUT M5 IS1363[90]() Specification : HEX HD NUT M5 IS:1363 C Estab
20) HEX HD BOLT M14 35 IS 1364[90]() Specification : HEX HD BOLT M14X35 IS:1364 GRADE -8.8 C Estab
21) HEX BOLT M 20 120 MPV[90]() Specification : HEX BOLT M20X120 TO IS:1364 FOR MPV GRADE 8.8 C Estab
22) BOLT M 12 20 WITH NUT[90]() Specification : BOLT M12X20 WITH NUT & SPG WASHER GRADE-8.8 C Estab
23) HEX HEADED SCREW M 8 40 MM[90]() Specification : HEX HEADED SCREW M8X40 MM TO IS:1364 (PART-2)-8.8-PL-WITH HEX NUT M8 IS:1364 (PART-3)-8-PL C Estab
24) HEX HEADED SCREW M 8 25[90]() Specification : HEX HEADED SCREW M8X25 MM IS:1364 (PART-2)-8.8-PL C Estab
25) HEX HEADED BOLT M14 2 35 MM[90]() Specification : HEX HEADED BOLTM14X2X35MM TO IS:1364(PART-2)8.8-BL C Estab
26) HEX HD BOLT M12 45 IS 1364[90]() Specification : HEX HD BOLT M12X45 IS:1364 GRADE 8.8 GALVANISHED 7 YELLOW PASSIVATED C Estab
27) HEX BOLT M 12 40 IS 1364[90]() Specification : HEX BOLT M12X40 IS:1364 GRADE 8.8 GALVANISHED & YELLLOW PASSIVATED C Estab
28) M20 TWO POINT FIVE 55 MM HEX BOLT[90]() Specification : M20X2.5X55 MM HEX BOLT GRADE-8.8 GALV & YELLOW PASSIVATED C Estab
29) HEX BOLT M20X50 IS 1364[90]() Specification : HEX BOLT M20X50 IS:1364 GRADE 8.8 GALVANISHED & YELLOW PASSIVATED C Estab
30) HEX BOLT M 12 30 IS 1364[90]() Specification : HEX BOLT M12X30 IS:1364 GRADE 8.8 GALVANISED & YELLOW PASSIVATED C Estab
31) NUT M12 CLEEVE LOC NUT[90]() Specification : NUT M12 CLEEVE LOC NUT C Estab
Category : p
Grade : Grade III
Size : L
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BOLT 3 BY 8 X 24 UNF 2A Description : BOLT 3 BY 8 X 24 UNF 2A() Specification : BOLT 3/8" X 24 UNF-2A-1.405" LONG AS PER DRAWING DRG. /PART NO. F-3555311-D PHOSPATED C Estab
2) BOLT M12 X 1 point 75 X 95 Description : BOLT M12 X 1 point 75 X 95() Specification : BOLT M12 X1.75 X 95, IS-1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED C Estab
3) HEX BOLT M20 1 POINT 5 40 Description : HEX BOLT M20 1 POINT 5 40() Specification : GRUB SCREW M6X2X10X6.6 IS 5370 C Estab
4) BOLT M8 X 85 IS:1364 GR-8.8() Specification : BOLT M8 X 80 IS - 1364 GR-8.8 C Estab
5) LOCK NUT M22 Description : LOCK NUT M22() Specification : CHECK NUT M22x1.5 LOCK NUT M22x1.5 DRG./PART NO.F-3592615-2/C C Estab
6) CSK SCREW M6X25() Specification : CSK SCREW M6X25MM C Estab
7) HEX HD NUT M20 Description : HEX HD NUT() Specification : HEX HD NUT M20 IS:1363 GR-8 GALV. & YELLOW PASSIVATED C Estab
8) HEX HEAD HIGH TENSILE BOLT Description : HEX HEAD HIGH TENSILE BOLT() Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL C Estab
9) HEX HEAD SCREW M12X50 Description : HEX HEAD SCREW M12X50() Specification : HEX HEAD SCREW M12X50 IS:1364 (PART-2)-8.8 C Estab
10) HEX HEAD SCREW M8X30 Description : HEX HEAD SCREW M8X30() Specification : HEX HEAD SCREW M8X30 IS:1364 (PART-1)-10.9 C Estab
11) HEX HEAD SCREW M10X30MM() Specification : HEX SCREW M10 X 30 MMto IS:1364 (Part-2)-8.8 PL C Estab
12) HEX HEADED SCREW M8X16MM Description : HEX HEADED SCREW M8 16 MM() Specification : HEX HEADED SCREW M8X16 MM TO IS:1364 (PART-2)-8.8-PL C Estab
13) HEX SCREW M4X15MM() Specification : Set Screw M4X25mm IS:1364 1992 Part-2, P-8.8-Galvanized & Yellow passivated C Estab
14) Lock Nut M18 X 1.5() Lock Nut M18 X 1.5 Drg/Pt. No. F-3545015-HA C Estab
15) Set Screw M14 X 1.5 X 45() Specification : Set Screw M14 X 1.5 X 45 IS-1364/1992 Part-II, P-8.8 Galvanised & Yellow Passivated Drg./Pt. No.-H-2021445 C Estab
16) PLAIN NUT M4 IS:1364 92 PT-III() Specification :Plain Nut M4 IS:1364 92 PT-III P8, Galvanised & Yellow passivated Pt. No.-L3010418 C Estab
Category : p
Grade : 1
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Set Screw M6X30[90]() Specification : HEX SCREW M6 X30 (102-00) SET SCREW M6 X30 (102-00) IS : 1364-1992 PT-II P.8.8 GALVD & YELLOW PASSIVATED C Estab
2) NYLOCK NUT 7 by 8 inch[90]() Specification : NYL0CK NUT 7/8 NYLOC NUT 7/8" B.S.F. BS 4929 P-II GALVD & YELLOW PASSIVATED C Estab
3) NYLOCK NUT PART NO L3611218[90]() Specification : NYLOC NUT M12 (102-12) NYLOC NUT M12X1.75 (102-12) IS : 7002 P.8 GALVD & YELLOW PASSIVATED L3611218 C Estab
4) BOLT M8 PART NO L1010816[90]() Specification : BOLT M8 X1.25 X80 BOLT M8 X 1.25 X 80 (102-18) IS - 1364-92 PT-I P-8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L-1010816 C Estab
5) BOLT M10 PART NO L1021009[90]() Specification : BOLT M10 X 45 (102-18) BOLT M10 X 1.5 X 45 (102-18) IS:1364-92 PT-1 P.8.8 GALVD & YELLOW PASSIVATED C Estab
6) BOLT M12 PART NO L1011228[90]() Specification : BOLT M12 X 1.75 X 140 BOLT M12 X 1.75 X 140 IS:1364-92 PT-I P-8.8 GALVD & YELLOW PASSIVATED L-1011228 C Estab
7) BOLT M12 PART NO L1011210[90]() Specification : BOLT M12 X1.75X 50 BOLT M12 X 1.75 X 50 (VTS) IS:1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED PT.NO. L - 1011210 C Estab
8) HEX NUT M 8[90]() Specification : NUT M8 (VTS) NUT M8 (VTS) IS:1364-1992 PART-III P.8 GALVD & YELLOW PASSIVATED L - 3010818 C Estab
9) BOLT M12 PART NO L1011212[90]() Specification : BOLT M12 X 1.75 X 60 BOLT M12 X 1.75 X 60 IS:1364-92 PT-1 P-8.8 GALVD & YELLOW PASSIVATED C Estab
10) BOLT M12 PART NO L1011209[90]() Specification : BOLT M12 X 1.75 X 45 BOLT M12 X 1.75 X 45 IS : 1364-1992 PT-I P-8.8 GALVD & YELLOW PASSIVATED C Estab
11) NYLOCK NUT PART NO L3621218[90]() Specification : NYLOC NUT M12 (102-04) NYLOC NUT M12 X1.5 (102-04) IS - 7002 P.8 GALVD & YELLOW PASSIVATED C Estab
12) BOLT M12 PART NO L1021214[90]() Specification : BOLT M12X1.5X70 BOLT M12X1.5X70 IS:1364-92, PT-I P-8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L1021214 C Estab
13) Set Screw M8X30[90]() Specification : HEX SCREW M8 X 30 (104-ED) SET SCREW M8 X 30 (104-ED) IS:1364-92 PT-II P-8.8 GALVD & YELLOW PASSIVATED C Estab
14) SCREW PART NO L2011035[90]() Specification : HEX SCREW M10 X 1.5 X 35 SET SCREW M10 X 1.5 X 35 IS-1364-1992 PART-II P.8.8 GALVD & YELLOW PASSIVATED C Estab
15) HEX SCREW M10 PART NO L2011020[90]() Specification : HEX SCREW M10 X 1.5X20 (104-ED HEX SCREW M10 X 1.5 X 20 IS:1364-1992 PT-2 P.8.8 GALVD & YELLOW PASSIVATED C Estab
16) Screw M12 PART NO L2021230[90]() Specification : HEX SCREW M12 X 1.5X30 AGB SET SCREW M112 X 1.5 X 30- AGB IS:1364-1992 PT-2 P.8.8 GALVD & YELLOW PASSIVATED C Estab
17) Screw M12 PART NO L2021235[90]() Specification : HEX SCREW M12X1.5x35 (VTS) SET SCREW M12 X 1.5 X 35 IS-1364-1992 PT.II P.8.8 ZINC GALVD & Y. PASSIVATED C Estab
18) Screw M12 PART NO L2021245[90]() Specification : HEX SCREW M12 X 1.5 X 45 HEX SCREW M12 X 1.5 X 45 IS:1364-92-PT.II P.8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L-2021245 C Estab
19) PLAIN NUT M 6[90]() Specification : PLAIN NUT M6 (102-16) PLAIN NUT M6 (102-16) IS:1364-1992 PART-III, P.8 GALVD & YELLOW PASSIVATED C Estab
20) PLAIN NUT M 10 PART NO L3011018[90]() Specification : PLAIN NUT M10 (102-21) PLAIN NUT M 10 X 1.5 IS:1364-1992 PART-3 P.8 GALVD & YELLOW PASSIVATED C Estab
21) PLAIN NUT M 12[90]() Specification : PLAIN NUT M12 (108-00) PLAIN NUT M12X1.5 (108-00) TO IS-1364-1992 PART-3 P.8 GALV & YELLOW PASSIVATED PT.NO.L-3021218 C Estab
22) NYLOCK NUT M10 PART NO L3621018[90]() Specification : NYLOC NUT M10 (102-13) NYLOC NUT M10X1.25 (102-13) IS:7002 P-8 GALVD & YELLOW PASSIVATED L - 3621018 C Estab
23) NYLOCK NUT M 6[90]() Specification : NYLOCK NUT M 6 X 1 NYLOCK NUT M 6 X 1 IS-7002 P-8 GALVD & YELLOW PASSIVATED L3610618 C Estab
24) NYLOCK NUT M10 PART NO L3611018[90]() Specification : NYLOC NUT M10X1.5 IS:7002 NYLOCK NUT M10 X 1.5 IS:7002 P.8 ALVD & YELLOW PASSIVATED L-3611018 F C Estab
25) Lock Nut M12[90]() Specification : LOCK NUT M12 X 1.75 LOCK NUT M12 X 1.75 IS 1364 PT-III P.8 GALVD & YELLOW PASSIVATED C Estab
26) Set Screw M8X35[90]() Specification : HEX SCREW M8 X1 X 35 (102-01) SET SCREW M8 X 35 (102-01) IS:1364-92 PT-II P-8.8 GALVD & YELLOW PASSIVATED C Estab
27) Set Screw M6X40[90]() Specification : HEX SCREW M6 X40 (102-00) SET SCREW M6 X40 (102-00) IS : 1364-1992 PT-II P.8.8 GALVD & YELLOW PASSIVATED C Estab
28) Set Screw M8X25[90]() Specification : HEX SCREW M8 X25 (102-22) SET SCREW M8 X25 IS-1364-1992 PART-II P.8.8 GALVD & YELLOW PASSIVATED C Estab
29) SCREW M10 PART NO L2021030[90]() Specification : HEX SCREW M10 X 1.25 X 30 SET SCREW M10 X 1.25 X 30 (102-17) IS:1364:1992 PT-II P-8.8 GALVD & YELLOW PASSIVATED C Estab
30) Screw M12 PART NO L2011225[90]() Specification : SET SCREW M12X1.75X25 SET SCREW M12X1.75X25 IS-1364-1992 PT-2 P.8.8 ZINC GALVD & YELLOW PASSIVATED C Estab
31) Screw M12 PART NO L2011235[90]() Specification : SET SCREW M12 X 1.75 X 35 SET SCREW M12 X 1.75 X 35 IS:1364-1992 PT-II P-8.8 ZINC/GALVD & Y.PASSIVATED C Estab
32) Screw M12 PART NO L2021240[90]() Specification : SET SCREW M12 X 1.5 X 40 SET SCREW M12 X 1.5 X 40 (102-02) L - 2021240 IS-1364-92 PT.2 P.8.8 GALVD & YELLOW PASSIVATED C Estab
33) Screw M12 PART NO L2011240[90]() Specification : SET SCREW M12 X 1.75 X 40 SET SCREW M12 X 1.75 X 40 IS:1364-1992 (PT-II) P-8.8 GALVD & YELLOW PASSIVATED L-2011240 C Estab
34) LOCK NUT M22[90]() Specification : CHECK NUT M22x1.5 LOCK NUT M22x1.5 DRG./PART NO.F-3592615-2/C C Estab
35) LOCK NUT M 18[90]() Specification : LOCK NUT M18X1.5 LOCK NUT M18 X 1.5 DRG./PART NO.F-3545015-HA C Estab
36) HEX NUT M16[90]() Specification : HEX NUT M16 IS-1364 PIII-P8 HEX NUT M16 X 2 IS-1364-1992 PT.III-P8 GALVD & YELLOW PASSIVATED C Estab
37) Hex Screw M8[90]() Specification : HEX SCREW M8X1.25X 20 (102-06) HEX SCREW M8 X 1.25 X 20 IS:1364-1992 PT-2 P.8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L2010820 C Estab
38) Set Screw M6x25[90]() Specification : HEX SCREW M6 X25 (104-ED) SET SCREW M6 X25 (104-ED) IS:1364-92 PT-II P-8.8 GALVD & YELLOW PASSIVATED L - 2010625 C Estab
39) PLAIN NUT M 22[90]() Specification : PLAIN NUT M22 (AD) PLAIN NUT M22 IS-1364 PT.3.P.8 PHOSPHATED FINISH & OIL PASSIVATED AS PER IS: 3618 CLASS - B PT NO.L 3012218 C Estab
40) SCREW M10 PART NO L2011030[90]() Specification : HEX SCREW M10 X 1.5 X 30 SET SCREW M10X1.5X30(102-21) IS-1364-1992 PT-II P.8.8 CALVD & YELLOW PASSIVATED C Estab
41) NYLOCK NUT M 8[90]() Specification : NYLOC NUT M8X1 IS:7002 G&Y NYLOC NUT M8 X 1 IS: 7002 G&Y GALVD & YELLOW PASSIVATED C Estab
Category : p
Grade : Grade III
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Hex Nut M16 X 2[90]() Specification : HEX NUT M16X2 GALVD. & YELLOW PASSIVATED IS - 1364-1992 PT. 111-P8 C Estab
2) LPTA PLAIN NUT M12X15[90]() Specification : PLAIN NUT M12 X 1.5 (108-00) GALV. & YELLOW PASSIVATED PART NO. L-3021218 TO IS -1364-1992 PART - 3.P.8 C Estab
3) LPTA PLAIN NUT M12 X 1 75[90]() Specification : PLAIN NUT M12 X 1.75 GALV. & YELLOW PASSIVATED DRG./PART NO. L-3011218 IS -1364-1992 PART - 3, P-8 C Estab
4) LPTA SL CH HEAD SCREW M5X20 WITH NUT[90]() Specification : SL. CH. HEAD SCREW M5X20L IS1366-4.8 Part No. 11390805-201 WITH HEX NUT M5 IS:1364 Part No. 1205-320050-6 (QTY 2 PER SET) C Estab
5) LPTA Hex Bolt M 14x1x30[90]() Specification : Hex Bolt M 14x1x30 C Estab
6) LPTA Coller Nuts Hex Bolt M35x1 5[90]() Specification : Coller Nut / Hex Nut M35x1.5 C Estab
Category : p
Grade : Grade III
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Hex Nut M16 X 2[90]() Specification : HEX NUT M16X2 GALVD. & YELLOW PASSIVATED IS - 1364-1992 PT. 111-P8 C Estab
2) LPTA PLAIN NUT M12X15[90]() Specification : PLAIN NUT M12 X 1.5 (108-00) GALV. & YELLOW PASSIVATED PART NO. L-3021218 TO IS -1364-1992 PART - 3.P.8 C Estab
3) LPTA PLAIN NUT M12 X 1 75[90]() Specification : PLAIN NUT M12 X 1.75 GALV. & YELLOW PASSIVATED DRG./PART NO. L-3011218 IS -1364-1992 PART - 3, P-8 C Estab
4) LPTA SL CH HEAD SCREW M5X20 WITH NUT[90]() Specification : SL. CH. HEAD SCREW M5X20L IS1366-4.8 Part No. 11390805-201 WITH HEX NUT M5 IS:1364 Part No. 1205-320050-6 (QTY 2 PER SET) C Estab
5) LPTA Hex Bolt M 14x1x30[90]() Specification : Hex Bolt M 14x1x30 C Estab
6) LPTA Coller Nuts Hex Bolt M35x1 5[90]() Specification : Coller Nut / Hex Nut M35x1.5 C Estab
Category : p
Grade : Grade III
Size : L
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile Description : Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile() Specification : Hex bolt 3/8 UNF 1 1/2" Bolt with sun lock nut and spring washer, high tensile. C Estab
2) NUT 3 BY 8 UNF Description : NUT 3 BY 8 UNF() Specification : NUT 3/8" X PCP UNF 3B PLATED C Estab
3) BOLT M12 PART NO L1011210 Description : BOLT M12 PART NO L1011210() Specification : BOLT M12 X1.75X 50 BOLT M12 X 1.75 X 50 (VTS) IS:1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED PT.NO. L - 1011210 C Estab
4) PLAIN NUT M12 X 1 POINT 75 IS 1364 1992 PART 3 P 8 GALVD AND YELLOW PASSIVATED DRG PART NO L 3011218 Description : PLAIN NUT M12 X 1 POINT 75 IS 1364 1992 PART 3 P 8 GALVD AND YELLOW PASSIVATED DRG PART NO L 3011218() Specification : PLAIN NUT M12 X 1.75 IS 1364 1992 PART-3 P 8 GALVD AND YELLOW PASSIVATED DRG PART NO L 3011218 C Estab
5) LPTA Set of WASHER Description : LPTA Set of WASHER() Specification : SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET C Estab
6) LPTA SL CH HEAD SCREW M5X20 WITH NUT Description : LPTA SL CH HEAD SCREW M5X20 WITH NUT() Specification : SL. CH. HEAD SCREW M5X20L IS1366-4.8 Part No. 11390805-201 WITH HEX NUT M5 IS:1364 Part No. 1205-320050-6 (QTY 2 PER SET) C Estab
7) ASSY WHEEL NUT M22 Description : ASSY WHEEL NUT M22() Specification : ASSY. WHEEL NUT M22×2.5 PT.NO.F3569510 C Estab
8) Axle Tube Nut-F-3550511A Description : Axle Tube Nut-F-3550511A() Specification : Axle Tube Nut Drg./Pt. No.- F3550511-A C Estab
9) SLOTTED NUT Description : SLOTTED NUT() Specification : SLOTTED NUT PART NO. F3596815-A C Estab
10) NYlock nut 7/8 '-F 3547515 Description : NYlock nut 7/8 '-F 3547515() Specification : Nylock Nut 7/8 "-F 3547515 C Estab
Category : p
Grade : 1
Size : L
3122 SRI VAMSHI ENGINEERING WORKS
MIG-79, DHARMA REDDY COLONY, PHASE-1, OPP.JNTU, KUKATPALLY, HYDERABAD -500085. NEAR ICIC BANK HYDERABAD Telangana
PIN1 : 500085
Phone No. : 23058312
GSTIN : 36AAXPN3823H1Z9 		AAXPN3823H

Download 		1) Small Arms Factory
Name Specification Use Status
1) Button Catch Magazine for JVPC 5.56MM DRG No. 0204-03-02-02-19-002-00DD[70]() Specification : Button Catch Magazine for JVPC 5.56MM DRG No. 0204-03-02-02-19-002-00DD C Nonestab
Category : p
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) MOUNT TO DRG NO AF8636709 LF 7432412047[74]() Specification : MOUNT TO DRG NO AF8636709 (LF 7432412047) C Nonestab
2) LUG TO DRG NO Y 7810136 LF 9927090268[99]() Specification : LUG TO DRG NO Y-7810136 (LF 9927090268) C Nonestab
3) MOUNT TO DRG NO AF8638134 LF 7432412041[74]() Specification : MOUNT TO DRG NO AF8638134 (LF 7432412041) C Nonestab
4) SPRING TO DRG NO Y 7773211 LF 9927091581[99]() Specification : SPRING TO DRG NO Y-7773211 (LF 9927091581) C Nonestab
5) PIN TO DRG NO AF8327127 LF 7432411002[74]() Specification : PIN TO DRG NO AF8327127 (LF 7432411002) C Nonestab
6) RING TO DRG NO AF8241335 LF 7432412030[74]() Specification : RING TO DRG NO AF8241335 (LF 7432412030) C Nonestab
7) RING TO DRG NO BSH8241280 LF 7420412002[74]() Specification : RING TO DRG NO BSH8241280 (LF 7420412002) C Nonestab
8) SPACER I LF 7432511045[74]() Specification : SPACER I TO DRG NO OLF/R&D/TVNE1PA/4B/139 M1 (LF 7432511045) C Nonestab
9) CONTACT TO DRG NO AF7732153 LF 7432412009[74]() Specification : CONTACT TO DRG NO AF7732153 (LF 7432412009) C Nonestab
10) CONTACT DRG NO AF7732428 LF NO 9927089341[99]() Specification : CONTACT DRG NO AF7732428 LF NO 9927089341 C Nonestab
11) RING TO DRG NO AF8241309 LF NO 7432412029[74]() Specification : RING TO DRG NO AF8241309 LF NO 7432412029 C Nonestab
12) NUT TO DRG NO AF8934171 LF NO 7432412043[74]() Specification : NUT TO DRG NO AF8934171 LF NO 7432412043 C Nonestab
13) MOUNT LF NO 7432412036[74]() Specification : MOUNT LF NO 7432412036 C Nonestab
14) AXLE DRG NO BSH8314081 LF NO 9004091226[90]() Specification : AXLE DRG NO BSH8314081 LF NO 9004091226 C Nonestab
15) WING NUT LF NO 9927090998[99]() Specification : WING NUT LF NO 9927090998 C Nonestab
16) RING LF NO 9004090949[90]() Specification : RING LF NO 9004090949 C Nonestab
17) CONNECT HOLDER LF NO 9001090114[90]() Specification : CONNECT HOLDER LF NO 9001090114 C Nonestab
18) SPACER III LF NO 7432511044[74]() Specification : SPACER III LF NO 7432511044 C Nonestab
19) PULLEY LF NO 7432312011[74]() Specification : PULLEY LF NO 7432312011 C Nonestab
20) BUSH LF NO 7432211002[74]() Specification : BUSH LF NO 7432211002 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN STRAIGHT HEADED CQA I 393 11 Description : PIN STRAIGHT HEADED CQA I 393 11() Specification : PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/11CAT/PT.NO.5315-008698 C Estab
2) Pin Straight Headed 393 27 Description : Pin Straight Headed 393 27() Specification : PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/27 C Estab
3) Pin Straight Headed CQA I 393 14 Description : Pin Straight Headed CQA I 393 14() Specification : PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/14 CAT/PT. NO.-5315-008699 C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA U Bolt with Nut[90]() Specification : U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) U BOLT REAR SPRING[90]() Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I] C Nonestab
2) U BOLT FRONT SPRING[90]() Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A C Nonestab
3) BOLT M12 PART NO L1011210[90]() Specification : BOLT M12 X1.75X 50 BOLT M12 X 1.75 X 50 (VTS) IS:1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED PT.NO. L - 1011210 C Nonestab
4) BOLT M12 PART NO L1011212[90]() Specification : BOLT M12 X 1.75 X 60 BOLT M12 X 1.75 X 60 IS:1364-92 PT-1 P-8.8 GALVD & YELLOW PASSIVATED C Nonestab
5) BUSH BOLT AGB PART NO X3541815[90]() Specification : BUSH BOLT - AGB (102-04) BUSH BOLT - AGB (102-04) DRG./PART NO.X-3541815(V-1) Y C Nonestab
6) BOLT M12 PART NO L1011209[90]() Specification : BOLT M12 X 1.75 X 45 BOLT M12 X 1.75 X 45 IS : 1364-1992 PT-I P-8.8 GALVD & YELLOW PASSIVATED C Nonestab
7) BOLT M12 PART NO L1021214[90]() Specification : BOLT M12X1.5X70 BOLT M12X1.5X70 IS:1364-92, PT-I P-8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L1021214 C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA U Bolt with Nut[90]() Specification : U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH C Nonestab
2) LPTA Hex Bolt M 14x1x30[90]() Specification : Hex Bolt M 14x1x30 C Nonestab
3) LPTA Coller Nuts Hex Bolt M35x1 5[90]() Specification : Coller Nut / Hex Nut M35x1.5 C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) WHEEL BOLT M 22[90]() Specification : WHEEL BOLT M22×2.5 PART NO. F-3569310-C C Nonestab
2) BOLT M10 70[90]() Specification : BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014 C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Hex Bolt M 14x1x30[90]() Specification : Hex Bolt M 14x1x30 C Nonestab
2) LPTA Coller Nuts Hex Bolt M35x1 5[90]() Specification : Coller Nut / Hex Nut M35x1.5 C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) WHEEL BOLT M 22[90]() Specification : WHEEL BOLT M22×2.5 PART NO. F-3569310-C C Nonestab
2) BOLT M10 70[90]() Specification : BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014 C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) T BOLT CLAMP[90]() Specification : T BOLT CLAMP (79DIA), PART NO. X-3900310 C Nonestab
2) U BOLT REAR SPRING[90]() Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I] C Nonestab
3) U BOLT FRONT SPRING[90]() Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) CASTING FOR BODY FOR TURRET ASSY. STEEL 40X GOST 977-75[90]() Specification : 40X GOST 977-75 C Estab
2) Casting for Bracket for Turret Assy.[90]() Specification : Casting for Bracket for Turret Assy. C Estab
3) UNION BULK HEAD (FOR MPV)[90]() Specification : UNION BULK HEAD DRG NO. 620-05-2001-1/A R Estab
4) BOLT DRAIN BUSH[90]() Specification : BOLT (DRAIN BUSH) DRG NO. OFPM 709-12-302-A C Estab
5) BOSS M6X12X30 OST 3[90]() Specification : BOSS M6X12X30 OST 3-1496-72 C Estab
6) BOSS M6X12X36 OST 3 1496 72[90]() Specification : BOSS M6X12X36 OST 3-1496-72 C Estab
7) BOSS M8X16X8 OST 3 1496 72[90]() Specification : BOSS M8X16X8 OST 3-1496-72 C Estab
8) BOSS M12x22x25 OST 3 1496 72[90]() Specification : BOSS M12x22x25 OST 3-1496-72 C Estab
9) THREADED BOSS[90]() Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8 C Estab
10) THREADED BOSS M6 X 12MM OD X12MM[90]() Specification : THREADED BOSS M6 X 12MM (OD) X12MM LENGTH TO DRG NO.218-03-1089/2 C Estab
11) THREADED BOSS M8 X 16MM OD X12MM[90]() Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH C Estab
12) THREADED BOSS M8 X 16MM OD X25MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH C Estab
13) THREADED BOSS M12 X 20MM OD X30MM[90]() Specification : THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7 C Estab
14) THREADED BOSS M8 X 16MM OD X40MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8 C Estab
15) THREADED BOSS M10 X 20MM OD X 30MM[90]() Specification : THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9 C Estab
16) THREADED BOSS M10X18MMX18MM[90]() Specification : THREADED BOSS M10 X 18MM (OD) X18MM LENGTH FULL THREADED MATERIAL :IS:9550 GR-2, 20C8 C Estab
17) BOSS M12 X 25L[90]() Specification : BOSS M12 X 25L DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B C Estab
18) Hinge Driver Hatch Assembly forging[90]() Specification : Hinge (Driver Hatch Assembly) forging C Estab
19) BOSS IS 9550[90]() Specification : BOSS M10X15LX180D IS:9550 C Estab
20) Catch oblique Hook Steel IS 4365 4379[90]() Specification : Catch/Hook Steel IS 4365-4379 C Estab
21) Handle Gost Std[90]() Specification : Handle Gost Std. (Handle Blank) C Estab
22) Eye 765 58 193 A[90]() Specification : Eye 765-58-193/A C Estab
23) SPLIT PIN 5 50 IS 549[90]() Specification : SPLIT PIN 5X50 IS:549 C Estab
24) BOSS M12 X24 OD X 25 L[90]() Specification : BOSS M12 X24 (OD) X 25 L C Estab
25) BOSS M12 X 20 OD X 30L[90]() Specification : BOSS M12 X 20 (OD)X 30L C Estab
26) BOSS M12 X 20 OD X 65L[90]() Specification : BOSS M12 X 20(OD)X 65L C Estab
27) HINGE GOST STD[90]() Specification : HINGE GOST STD 765-58-211 C Estab
28) AXLE GOST STD OBLIQUE BAR[90]() Specification : AXLE GOST STD./ BAR C Estab
Category : p
Grade : Grade III
Size : S
3123 NEERAJ INDUSTRIES
31, IDC, HISSAR ROAD ROHTAK ROHTAK Haryana
PIN1 : 124001
Phone No. : 297014
GSTIN : 06AANPB7554K1ZF 		RTKS04687E

Download 		1) Ordnance Factory Varangaon
Name Specification Use Status
1) Magnesium Powder for Explosives & Pyrotechnic composition grade "VIII"[10]() Specification : To Specn.:- IS : 2307-2004 (2nd Revision) WITH PARTICAL SIZE : RETAINED ON 212 MICRON IS SIEVE : 0.5% MAX, RETAINED ON 150 MICRON : 7% MAX, PASSING THROUGH 63 MICRON : 15% MAX, APPARENT DENSITY : 0.65 TO 0.85 GM/CC. R Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1001491897 POWDER MAGNESIUM GR C1 IS-2307-1977[10]() Specification : SPECN.NO.IS-2307-1977 (FIRST REVISION WITH AMMENDMENT NO.1) REAFFIRMED-1991 R Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Magnesium Powder Gr.B medium density, Apparent density : 0.65 to 0.85g/ml ,retained on 72 BSS/ 212 M() IS-2307-2004 R Estab
2) MAGNESIUM POWDER GR. IX() IS-2307-2004 (SECOND REV.) R Established
3) Magnesium powder grade “V� for explosive & pyrotechnic composition, medium density, passing th() IS-2307-2004 R Estab
4) Magnesium Powder Grade IV low density, Apparent density : 0.40 to 0.60 g/ml ,retained on 72 BSS/ 212() IS-2307-2004 R Estab
5) Magnesium Powder Grade I Apparent density:0.8 to 0.9 g/ml() IS-2307-2004 (Rev-II) R Non Established
6) Magnesium Powder Grade II Apparent density:0.8 to 0.9 g/ml() IS-2307-2004 R Non Established
7) Magnesium Powder Grade III Apparent density:0.65 to 0.85 g/ml() IS-2307-2004 R Non Established
8) Magnesium Powder Grade IV Apparent density:0.65 to 0.85 g/ml() IS-2307-2004 R Non Established
9) Magnesium Powder Grade VII Apparent density:0.65 to 0.85 g/ml() IS-2307-2004 R Non Established
10) Magnesium Powder Grade VIII Apparent density:0.65 to 0.85 g/ml() IS-2307-2004 (Rev-II) R Non Established
11) Magnesium Powder Grade IX Apparent density:0.4 to 0.6 g/ml() IS-2307-2004 R Non Established
12) Magnesium Powder Grade XI Apparent density:0.65 to 0.85 g/ml() IS-2307-2004 R Non Established
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Itarsi
Name Specification Use Status
1) MAGNESIUM POWDER GRADE.IV() AS PER SPECIFICATION CS 5035 A(RECENT VERSION KNOWN AS D EF-STAN-13-130 E Not Estab
2) MAGNESIUM POWDER GRADE.V() AS PER SPECIFICATION CS 5035 A (RECENT VERSION KNOWN AS DEF-STAN-13-130 E Not Estab
Category : DP
Grade : II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) Magnesium Powder gr.III[10]() Specification : MAGNESIUM POWDER FOR EXPLOSIVE&PYROTECHNIC COMPOSITION GRIIITOSPECN-IS:2307-2004(2nd REV) R Estab
Category : p
Grade : Grade II
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) MAGNESIUM PWDR GRR APP DEN NOT<.4&>.6G/[10]() Specification : IS 2307:2004 (SECOND REVISION) R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1001491890 MAGNESIUM POWDER GRADE B() SPECN NO. IS: 2307-1977 R Estab.
2) 1001491897 MAGNESIUM POWDER GRADE C-1() SPECN NO. IS: 2307-1977 R Estab.
Category : DDP
Grade : I
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001491890 POWDER MAGNESIUM GR B RETN 240 BSS Description : 1001491890 POWDER MAGNESIUM GR B RETN 240 BSS() Specification : IS-2307-1977 R Estab
2) 1001491897 POWDER MAGNESIUM GR C1 IS-2307-1977 Description : 1001491897 POWDER MAGNESIUM GR C1 IS-2307-1977() Specification : SPECN.NO.IS-2307-1977 (FIRST REVISION WITH AMMENDMENT NO.1) REAFFIRMED-1991 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) MAGNESIUM POWDER GR.B Description : MAGNESIUM POWDER GR.B() Specification : MAGNESIUM POWDER GR.B, PARTICLE SIZE BS SIEVE NO. AS PER CS-5035-A (A) 30 BSS = ALL PASS. (B) 44 BSS = NOT MORE THAN 15% RETAINED. (C) 100 BSS = NOT MORE THAN 15% PASS. (D) 120 BSS = ALL RETAINED. APPARENT DENSITY: 0.65 TO 0.85 g/ml & OT R Estab
Category : p
Grade : 3
Size : S
3124 METRO INDUSTRIES
KATRA, KATNI ROAD ADHARTAL JABALPUR Madhya Pradesh
PIN1 : 482010
Phone No. : 9300103243
GSTIN : 23AFJPK1554R1Z2 		AFJPKL554R

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) BRACKET FOR AXLE LAMP[90]() Specification : AS PER COMPONENT DRG. C Nonestab
2) Drinking Water Tank Part No X4110910E for Stallion[90]() Specification : As per specification / drg. C Nonestab
3) Load Body Accessories[90]() Specification : As per specification / drg. C Nonestab
4) Load Body Complete Drg No B6510604 C 1 for Stallion vehicle[90]() Specification : As per specification / drg. C Nonestab
5) BRACKET AGB[90]() Specification : BRACKET -AGB (102-04), PART NO. X0472614-V1 C Nonestab
6) SUB ASSY OF STRAP FUEL TANK MOUNTING[90]() Specification : S/A OF STRAP FUEL TANK MOUNTING, PART NO. X-3042214-# C Nonestab
7) BRACKET ON FRAME[90]() Specification : BRACKET ON FRAME, PART NO. F-0420714 C Nonestab
8) CAB MOUNTING BRACKET LH[90]() Specification : CAB MOUNTING BRACKET LH DRG./PART NO. X-0444510[E] C Nonestab
9) CAB MOUNTING BRACKET RH[90]() Specification : CAB MOUNTING BRACKET RH DRG./PT.NO. X-0444410[E] C Nonestab
10) S A OF CSO BRACKET[90]() Specification : S/A OF CSO BRACKET B1742801(HASE.3) C Nonestab
11) BRACKET FUEL TANK BRACKET[90]() Specification : BRACKET-FUEL TANK BRACKET P.NO. X7184610-B.1 C Nonestab
12) S A OF FUEL TANK RH 160 LITRE[90]() Specification : S/A OF FUEL TANK-RH (160 LITRE) PT.NO.B5028201-V2 C Nonestab
13) S A OF FUEL TANK LH 160 LITRE[90]() Specification : S/A OF FUEL TANK-LH(160 LITRE) PT.NO.B5028202-[V2] C Nonestab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Assy Mounting Spare Wheel Carrier[90]() Specification : ASSY MTG SPARE WHEEL CARRIER (WITHOUT LIFTING UNIT) (CONSISTING OF COMPONENTS AS PER LIST ATTACHED) C Nonestab
2) LPTA Assy Spare wheel lifting Unit[90]() Specification : ASSY SPARE WHEEL LIFTING UNIT - COMPLETE INCLUDING ASSEMBLY HANDLE AND ROPE TO DRG. NO. CONSISTING OF DRGS. AS PER LIST ATTACHED. C Nonestab
3) LPTA LPTA LOAD BODY[90]() Specification : LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL C Nonestab
4) LPTA Stud for water Tank[90]() Specification : STUD FOR WATER TANK FITMONT (4/SET) 2614 7061 8801 NOTE: - TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION C Nonestab
5) LPTA ASSY TAIL LAMP RH and LH 24VBS 3[90]() Specification : ASSY TAIL LAMP RH & LH 24V (05 CHAMBER) ALONGWITH LAMP. LPTA715 BS-III.PART NO. 280954441602 & 280954441603 REF.DRG. 2641 5440 0447) C Nonestab
6) LPTA ASSY FUEL TANK COMPLETE[90]() Specification : ASSY FUEL TANK COMPLETE 2154 4750 0102-V2 WITH ASSY DIP STICK PTNO.261447100211 FLOAT VALVE DRG.0005420.204J (215447500101(V-2) ASSY.AIR BREATHER PTNO 2574 2815 9901 & SUCTION TUBE WITH FUEL TANK(275147100106) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) STEPNEY MOUNTING BRACKET LH AND RH DRG 640 01 70002 B AND DRG NO 640 01 7000 2 B[90]() Specification : STEPNEY MOUNTING BRACKET LH AND RH DRG. 640-01-7000-2/B AND DRG.NO-640-01-7000-2/B C Estab
Category : p
Grade : Grade III
Size : S
3125 GEE PEE ELECTROSPARK PRIVATE LIMITED
75&81, IP, PASHAMYLARAM, PATANCHERU,. MEDAK Telangana
PIN1 : 502307
Phone No. : 223639
GSTIN : 36AAACG7414R1Z6 		HYDG00970E

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) CRADLE CLAMP AS PER THE DESCRIPTION AND THE BILL OF MATERIAL (ENCLOSED) OF PART NO 1148547[90]() Specification : CRADLE CLAMP AS PER THE DESCRIPTION AND THE BILL OF MATERIAL (ENCLOSED) OF PART NO 1148547 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) MOD ENGINE HOUSING TO INTEGRATE CUM[90]() Specification : MOD ENGINE HOUSING TO INTEGRATE CUMMINS ENGINE FOR 155MM FH GUNS C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) UPPER RACE RING SEMI MACHINED LF 6106915784[61]() Specification : MACHINING ASSISTANCE C Nonestab
2) LOWER RACE RING SEMI MACHINED LF 6106915785[61]() Specification : MACHINING ASSISTANCE AS PER SCOPE OF WORK C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FRONT HOOK TO DRAWING NO 172 01 456 3 LF 6101006055[61]() Specification : SERVICE ASSISTANCE C Nonestab
2) COVER TO DRG NO 175 03 006 1A LF 6106802068[61]() Specification : SERVICE ASSISTANCE C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) VALVE THREE WAY TO DRG NO IAN 301SA[90]() Specification : VALVE THREE WAY TO DRG NO IAN 301SA C Nonestab
2) BEARING SLEEVE DRG NO 3120 004647[90]() Specification : BEARING SLEEVE DRG NO 3120 004647 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) COMPENSATOR / 172.35.028CB[62]() Specification : COMPENSATOR / 172.35.028CB E Nonestab
2) EXHAUST SYSTEM / 188.35SP-4[62]() Specification : EXHAUST SYSTEM / 188.35SP-4 E Nonestab
3) MOUNTING OF EXHAUST SYSTEM / 188.35CB-4CB[62]() Specification : MOUNTING OF EXHAUST SYSTEM / 188.35CB-4CB E Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) CASE(CASTING)-172.28.003-1[06]() Specification : -- C Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) STOP-172.28.022-2[06]() Specification : -- C Nonestab
Category : p
Grade : Grade III
Size : S
3126 SAINI ENTERPRISES
NEAR RTC GODOWN SUHAGI JABALPUR Madhya Pradesh
PIN1 : 482004
Phone No. : 2353148
GSTIN : 23AKJPS8977K1Z8 		AKJPS8977K

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) O RING 78X2 LF 2013436144 Description : O RING 78X2 LF 2013436144() Specification : 'O' RING 78X2 (2013436144) C Nonestab
2) O RING 67 5 X 2 4 lf 2013436145 Description : O RING 67 5 X 2 4 lf 2013436145() Specification : "O" RING 67.5 X 2.4 TO DRG NO F-1301-043760-D DC NO 36783-A DT 19/9/01 NEOPRENE RUBBER SPECN:-IND/ME/884:2015 COMPOUNDNO.C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO.5403-ME DATED- 01/02/2016.COMPATIBLE WITH RDX,TNT.TO SEPCN F-1301-907400DDATE C Nonestab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Rubber Items for MPV[90]() Specification : RUBBER ITEMS FOR MPV AS PER DRG. NO. MPV/HULL/093/A CONSISTING OF 1. MUD RUBBER - 4 NO/SET, 2. TROOPER COMPARTMENT - 1 NO/SET, 3. FUEL TANK UPPER - 1 NO/SET, 4. FUEL TANK LOWER - 1 NO/SET, 5. CO-DRIVER SIDE - 1 NO/SET, 6. DRIVER SIDE & A. C Estab
2) RUBBER BEEDING[90]() Specification : RUBBER BEEDING (NITRILE RUBBER) AS PER DRG NO. 645-01-7220-1/A C Estab
3) GAITTER RUBBER[90]() Specification : GAITTER RUBBER,PART NO. F 1135650-V1 C Estab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) Rubber Bush Description : Rubber Bush() Specification : As per specification / drg. C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) R S Buffer Description : R S Buffer() Specification : R.S. Buffer, Drg./Pt. no. F2631400 B C Estab
2) Rubber bush-F0530150H Description : Rubber bush-F0530150H() Specification : Rubber bush, Drg./Pt. no.-F0530150H C Estab
3) S A of Bump Stop Description : S A of Bump Stop() Specification : S/A of Bump Stop, Drg./Pt. no. F2632200 V1A C Estab
4) Sleeve-X1201250 Description : Sleeve-X1201250() Specification : Sleeve Drg./Pt. No.-X 1201250 HASE C Estab
5) DISTANCE PIECE FOR L LOGO Description : DISTANCE PIECE FOR L LOGO() Specification : DISTANCE PIECE FOR "L" LOGO DISTANCE PIECE FOR " L " LOGO. DRG./PART NO.F7617260-HASE. C Estab
Category : p
Grade : 3
Size : S
1) Grey Iron Foundry

[ENR Registration]
Name Specification Use Status
1) NOSE PLUG (PLASTIC) DRG.N0.AAIW/BS-0112. Description : NOSE PLUG (PLASTIC) DRG.N0.AAIW/BS-0112.() Specification : NOSE PLUG (PLASTIC) DRG.N0.AAIW/BS-0112.NOSE PLUG (PLASTIC ) AS PER DRG. NO. BS - 0112, C Estab
2) GASKET NEOPRENE RUBBER OD 91 5 MM Description : GASKET NEOPRENE RUBBER OD 91 5 MM() Specification : GASKET NEOPRENCE RUBBER, OD-91.5 MM X ID-79.5 MM X 3MM THICK IND/ME/ 884 (PROV) CLASS C-50 TO DRG. NO.AAIW/BS-0079 C Estab
3) GASKET NEOPRENE RUBBER OD 43 MM Description : GASKET NEOPRENE RUBBER OD 43 MM() Specification : GASKET NEOPRENE RUBBER, OD-43 X ID 35 MM X 1 MM THICK IND/ME/ 884 (PROV) CLASS C50 TO DRG. NO.AAIW/BS-0076 C Estab
4) NEOPRENE WASHER OD 48 X ID 33 MM Description : NEOPRENE WASHER OD 48 X ID 33 MM() Specification : NEOPRENCE WASHER AS PER IND/ME/884 (PROV) CLASS C50 TO DRG.NO.AAIW/BS-0115(FORBASEPLUG TO DRG.NO. BS- 0113) C Estab
5) Neoprene Washer OD 40 Description : Neoprene Washer OD 40() Specification : Neoprene Washer OD 40 C Estab
Category : p
Grade : 3
Size : S
3127 ESAB INDIA LTD.
218, ASHIRWAD HOUSE BAJAJ NAGAR NAGPUR MAHARASHTRA
PIN1 : 440010
Phone No. : 9764014116 		AAACE0861G

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SILVER BRAZING ALLOY ROD Description : SILVER BRAZING ALLOY ROD() Specification : SILVER BRAZING ALLOY ROD 1/16,, DIA WO NICKLE TO SPECN. IS00-2927-1975 GD. BA CU AG-10 R Estab
Category : ddp
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) M S WELDING ELECTRODE Description : M S WELDING ELECTRODE() Specification : M.S.WELDING ELECTRODE MEDIUM COATED TO SIZE 3.15MM X 350 MM LONG CONFORMING TO IS SPECN 814-1991 AND CODING ER-4211 P Estab
2) WELDING ELECTRODES SIZE: 3.15 MM Description : WELDING ELECTRODES SIZE: 3.15 MM() Specification : CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE P Estab
3) WELDING ELECTRODES SIZE: 4 MM Description : WELDING ELECTRODES SIZE: 4 MM() Specification : CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION P Estab
4) WELDING ELECTRODES SIZE: 5 MM Description : WELDING ELECTRODES SIZE: 5 MM() Specification : CQA (M) 57 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION P Estab
Category : ddp
Grade : 1
Size : L
3128 Ador Fontech Limited
Belview Apt 7 Haudin Road Bangalore Karnataka
PIN1 : 560042
Phone No. : 25596045
GSTIN : 29AABCA1724H1ZY 		BLRA01466D

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) WELDING ELECTRODES SIZE: 3.15 MM[90]() Specification : CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE P Estab
2) WELDING ELECTRODES SIZE: 4 MM[90]() Specification : CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION P Estab
3) WELDING ELECTRODES SIZE: 5 MM[90]() Specification : CQA (M) 57 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION P Estab
Category : p
Grade : Grade III
Size : M
3129 RANE (MADRAS) LIMITED
154, GANAPATHI BUILDING VELACHERY ROAD CHENNAI TAMIL NADU
PIN1 : 600042
Phone No. : 044-42267800
GSTIN : 33AACCR9772M1ZS 		CHER08863B

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) DRAG LINK 40 x 40 Description : DRAG LINK 40 x 40() Specification : DRAG LINK 40 x 40 DRG. NO. MPV/ARMY/MOD/043/B C Estab
Category : p
Grade : 1
Size : L
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) DRAG LINK 40 x 40 Description : DRAG LINK 40 x 40() Specification : DRAG LINK 40 x 40 DRG. NO. MPV/ARMY/MOD/043/B C Estab
Category : p
Grade : 1
Size : L
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) DRAG LINK 40 x 40 Description : DRAG LINK 40 x 40() Specification : DRAG LINK 40 x 40 DRG. NO. MPV/ARMY/MOD/043/B C Estab
Category : p
Grade : 1
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Assy Tie Rod[90]() Specification : Assy Tie Rod Part No X 261433800103 C Estab
Category : ddp
Grade : Grade I
Size : L
3130 D&H Secheron Electrodes Pvt. Ltd.
44-46 Industrial Estate Kila Maidan indore Madhya Pradesh
PIN1 : 452006
Phone No. : 09685091141
GSTIN : 23AAACD6111E1ZF 		BPLD00066D

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) M S WELDING ELECTRODE Description : M S WELDING ELECTRODE() Specification : M.S.WELDING ELECTRODE MEDIUM COATED TO SIZE 3.15MM X 350 MM LONG CONFORMING TO IS SPECN 814-1991 AND CODING ER-4211 P Estab
2) WELDING ELECTRODES SIZE: 3.15 MM Description : WELDING ELECTRODES SIZE: 3.15 MM() Specification : CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE P Estab
3) WELDING ELECTRODES SIZE: 4 MM Description : WELDING ELECTRODES SIZE: 4 MM() Specification : CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION P Estab
4) WELDING ELECTRODES SIZE: 5 MM Description : WELDING ELECTRODES SIZE: 5 MM() Specification : CQA (M) 57 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION P Estab
Category : ddp
Grade : 1
Size : M
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) COATED METALLIC ELECTRODES OF 18 CR 8 NI 6 MN FOR WELDING SPADE ARMOUR PLATES ON FIGHTING VEHICLE TO 1785950150 Description : COATED METALLIC ELECTRODES OF 18 CR 8 NI 6 MN FOR WELDING SPADE ARMOUR PLATES ON FIGHTING VEHICLE TO 1785950150() Specification : CQA(M):(5.00X350) R Estab
2) COATED METALLIC ELECTRODES to 1785950160 Description : COATED METALLIC ELECTRODES to 1785950160() Specification : CQA(M):(6.00X350) R Estab
3) COATED METALLIC ELECTRODE to 1785950132 Description : COATED METALLIC ELECTRODE to 1785950132() Specification : CQA(M):(3.15X300) R Estab
4) COATED METALLIC ELECTRODES to 1785950140 Description : COATED METALLIC ELECTRODES to 1785950140() Specification : CQA(M):(4.00X350) R Estab
5) WELDG ELECTRODE ARMOID I to 0016002084 Description : WELDG ELECTRODE ARMOID I to 0016002084() Specification : AUST S.ST 3.15 R Estab
6) WELDG ROD RUTOX to 1786950830 Description : WELDG ROD RUTOX to 1786950830() Specification : RUTOX-20/9/3(3.15) R Estab
7) WELDG ROD RUTOX to 1786950840 Description : WELDG ROD RUTOX to 1786950840() Specification : RUTOX-20/9/3(4MM) R Estab
8) WELDG ROD RUTOX to 1786950850 Description : WELDG ROD RUTOX to 1786950850() Specification : RUTOX-20/9/3(5MM) R Estab
9) WELDG ELECTRODE RUTOX to 1786950860 Description : WELDG ELECTRODE RUTOX to 1786950860() Specification : RUTOX-20/9/3(6MM) R Estab
10) WELDG ELECTRODE RUTOX to 1786950880 Description : WELDG ELECTRODE RUTOX to 1786950880() Specification : RUTOX-20/9/3(8MM) R Estab
Category : p
Grade : 2
Size : M
3131 SEQUOIA SAFETY PRODUCTS PRIVATE LIMITED
04, POCKET - 1, JASOLA, NEW DELHI Delhi
PIN1 : 110025
Phone No. : 40554651
GSTIN : 09AAKCS5987M1Z9 		DELS33851G

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) TUBELESS TYRE WITH RUNFLAT SYSTEM & WHEEL RIM FOR MPV[90]() Specification : TUBELESS TYRE WITH RUNFLAT SYSTEM & WHEEL RIM AS PER SPECIFICATION NO. VFJ/SP/TSS/RFS/01/MPV (ARMY & MHA)/ AMENDMENT NO. 10 DATED 10-07-2015 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) TUBELESS TYRE WITH RUNFLAT SYSTEM & WHEEL RIM FOR MPV[90]() Specification : TUBELESS TYRE WITH RUNFLAT SYSTEM & WHEEL RIM AS PER SPECIFICATION NO. VFJ/SP/TSS/RFS/01/MPV (ARMY & MHA)/ AMENDMENT NO. 10 DATED 10-07-2015 C Nonestab
2) RUN FLAT SYSTEM FOR BP TATA 407[90]() Specification : RUN FLAT SYSTEM FOR TATA 407 BS-IV VEHICLE (4X4). AS PER SPECIFICATION NO. VFJ/ODC/TATA407 RUN FLAT DTD. 08/01/2019 C Nonestab
3) Run Flat System for Bullet Proofing of SML LF no 9413100008000[90]() Specification : Specification No. VFJ/TSS /SML 4WD 3365 RUN FLAT DtD. 28/11/2019. C Nonestab
Category : p
Grade : Grade II
Size : S
3132 Diffusion Engineers Limited
T5-6, MIDC HINGNA INDUSTRIAL AREA NAGPUR MAHARASHTRA
PIN1 : 440016
Phone No. : 07104234727 		NGDP00756A

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) WELDING ELECTRODES SIZE: 3.15 MM Description : WELDING ELECTRODES SIZE: 3.15 MM() Specification : CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE P Estab
2) WELDING ELECTRODES SIZE: 4 MM Description : WELDING ELECTRODES SIZE: 4 MM() Specification : CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION P Estab
3) WELDING ELECTRODES SIZE: 5 MM Description : WELDING ELECTRODES SIZE: 5 MM() Specification : CQA (M) 57 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION P Estab
Category : ddp
Grade : 1
Size : L
3133 Deepak Fasteners Limited
4th Floor The first Mall Mall road Ludhiana Punjab
PIN1 : 141001
Phone No. : 3911111
GSTIN : 03AAACD6282G1ZX 		JLDDO0515E

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) HEX HEADED BOLT M 12 X 1.75 X 50 MM[90]() Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT C Estab
2) HEX HEADED SCREW M12X1.75X30MM[90]() Specification : HEX HEADED SCREW M12X1.75X30MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8- AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT. C Estab
3) HEX NUT M16 X 2 IS1364[90]() Specification : HEX NUT M16 X 2 IS:1364-(PART-3)-8 C Estab
4) HEX NUT M10 TO IS 1364[90]() Specification : HEX NUT M10 TO IS:1364 (PART-III)-8 C Estab
5) HEX NUT M8 IS 1364[90]() Specification : HEX NUT M8-IS:1364(PART-3)-8 C Estab
6) HEX HEAD NUT M12 TO IS1364[90]() Specification : HEX HEAD NUT M12 TO IS:1364 (PART-3)-8-BL C Estab
7) PUNCHED WASHER A11[90]() Specification : PUNCHED WASHER A11 TYPE A (11X21X2) IS:2016-STEEL-CD PLATED C Nonestab
8) SPRING WASHER A12[90]() Specification : SPRING WASHER A12 IS:3063-CD PLATED C Nonestab
9) HEX HEAD SCREW M12X50[90]() Specification : HEX HEAD SCREW M12X50 IS:1364 (PART-2)-8.8 C Estab
10) HEX HEAD SCREW M8X30[90]() Specification : HEX HEAD SCREW M8X30 IS:1364 (PART-1)-10.9 C Estab
11) WASHER IS 5370[90]() Specification : WASHER 4.3 DIAX9X0.80 IS:5370 C Nonestab
12) CSK SCREW IS 1365[90]() Specification : CSK SCREW (M6X16L)/IS:1365 C Nonestab
13) SPRING WASHER DIA 10 IS 6735[90]() Specification : SPRING WASHER (DIA 10)/IS:6735 C Nonestab
14) PLAIN WASHER DIA 10 IS 5370[90]() Specification : PLAIN WASHER (DIA 10)/IS:5370 C Nonestab
15) HEX BOLT IS 1364[90]() Specification : HEX BOLT M20x1.5x40 IS:1364 GRADE 8.8 GLAVANISHED & YELLOW C Estab
16) HEX HD BOLT IS1363[90]() Specification : HEX HD BOLT (M10X20L)/IS:1363 C Nonestab
17) PLAIN WASHER DIA 8 IS 5370[90]() Specification : PLAIN WASHER DIA 8/IS:5370 C Nonestab
18) PLAIN WASHER DIA 6 IS 5370[90]() Specification : PLAIN WASHER (DIA 6)/IS:5370 C Estab
19) HEX HD BOLT M8X25L IS 1363[90]() Specification : HEX. HD. BOLT (M8X25L)/IS:1363 C Nonestab
20) SOCKET HD SCREW IS 2269[90]() Specification : SOCKET HD SCREW M6X16 IS:2269 C Nonestab
21) SPRING WASHER DIA 8 IS 6735[90]() Specification : SPRING WASHER (DIA 8)/IS 6735 C Nonestab
22) HEX HEADED BOLT M6 1 1 12 MM[90]() Specification : HEX HEADED BOLT M6X1X12 MM TO IS:1364 (PART-1) 8.8-BL C Estab
23) HEX HEADED BOLT M 20 45 MM[90]() Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT C Estab
24) HIGH TENSILE HEX BOLT[90]() Specification : HIGH TENSILE HEX. BOLT M20X2.5X55 MM LENGTH-IS:1364(PART-2)-8.8 -BL WITH HEX. NUT M20 IS:1364-(PART-3)-8-BL WITH SPRING WASHER A20 IS:3063 Cd PLATED BOLT NUT C Estab
25) HEX HEADED BOLT M12 60[90]() Specification : HEX HEADED BOLT M12 X 60 MM TO IS:1364(PART-1)-8-8-PL C Estab
26) HEX HD BOLT M14 35 IS 1364[90]() Specification : HEX HD BOLT M14X35 IS:1364 GRADE -8.8 C Estab
27) SPRING WASHER M24 IS 6735[90]() Specification : SPRING WASHER M24 IS:6735 C Nonestab
28) SPRING WASHER M 20 IS 6735[90]() Specification : SPRING WASHER M 20 IS:6735 C Nonestab
29) SPRING WASHER A6 IS 3063[90]() Specification : SPRING WASHER A IS:3063- CD PLATED C Nonestab
30) SPRING WASHER A10 IS 3063[90]() Specification : SPRING WASHER A10 IS:3063-CD PLATED C Nonestab
31) HEX HEADED SCREW M 8 25[90]() Specification : HEX HEADED SCREW M8X25 MM IS:1364 (PART-2)-8.8-PL C Estab
32) HEX HEADED BOLT M14 2 35 MM[90]() Specification : HEX HEADED BOLTM14X2X35MM TO IS:1364(PART-2)8.8-BL C Estab
33) HEX HD BOLT M12 45 IS 1364[90]() Specification : HEX HD BOLT M12X45 IS:1364 GRADE 8.8 GALVANISHED 7 YELLOW PASSIVATED C Estab
34) HEX BOLT M 12 40 IS 1364[90]() Specification : HEX BOLT M12X40 IS:1364 GRADE 8.8 GALVANISHED & YELLLOW PASSIVATED C Estab
35) Spring Washer B 5 IS 3063[90]() Specification : Spring Washer B 5 I.S. 3063 C Nonestab
36) SPRING WASHER M20 IS 6735[90]() Specification : SPRING WASHER M20 IS:6735 C Nonestab
37) HEX BOLT M20X50 IS 1364[90]() Specification : HEX BOLT M20X50 IS:1364 GRADE 8.8 GALVANISHED & YELLOW PASSIVATED C Estab
38) HEX BOLT M 12 30 IS 1364[90]() Specification : HEX BOLT M12X30 IS:1364 GRADE 8.8 GALVANISED & YELLOW PASSIVATED C Estab
39) HEX BOLT M10X30 IS 1364[90]() Specification : HEX BOLT M10X30 IS:1364 GRADE 8.8 GALVAISED & YELLOW PASSIVATED MAKE-TVS, LPS , UNBRAKO. C Estab
40) HEX BOLT M10X20 IS 1364[90]() Specification : HEX BOLT M10X20 IS:1364 GRADE 8.8 GALVANISED & YELLOW PASSIVATED MAKE-TVS , LPS , UNBRAKO C Estab
41) NYLOC NUT M8 IS 7002 P 8 GALVD AND YELLOW PASSIVATED[90]() Specification : NYLOC NUT M8 IS:7002 P-8 GALVD AND YELLOW PASSIVATED C Nonestab
42) BOLT M12 X 1 POINT 5 X 125 PART NOL1011225 IS 1364 92 PT I P 8 8[90]() Specification : BOLT M12 X 1.5 X 125 PART NO.L1011225.IS:1364-92 PT-I P-8.8 C Nonestab
43) HEX SCREW M6 1 15 IS 1364[90]() Specification : HEX SCREW M6 1 15 IS 1364 C Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BOLT 3 BY 8 X 24 UNF 2A Description : BOLT 3 BY 8 X 24 UNF 2A() Specification : BOLT 3/8" X 24 UNF-2A-1.405" LONG AS PER DRAWING DRG. /PART NO. F-3555311-D PHOSPATED C Estab
2) BOLT M12 X1 PONT 75X 95 Description : BOLT M12 X1 PONT 75X 95() Specification : BOLT M12 X1 PONT 75X 95, LF NO: 9013111047000, IS: 1364-1992 PT-I P.8.8 C Estab
3) BOLT M 12 20 WITH NUT Description : BOLT M 12 20 WITH NUT() Specification : BOLT M12X20 WITH NUT & SPG WASHER GRADE-8.8 C Estab
4) COLLAR TYPE HEX HEAD BOLT Description : COLLAR TYPE HEX HEAD BOLT() Specification : COLLAR TYPE HEX HEAD BOLT M 14 X 1.5 X 50 HIGH TENSILE GRADE-10.9 C Estab
5) Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile Description : Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile() Specification : Hex bolt 3/8 UNF 1 1/2" Bolt with sun lock nut and spring washer, high tensile. C Estab
6) HEX BOLT M20 1 POINT 5 40 Description : HEX BOLT M20 1 POINT 5 40() Specification : GRUB SCREW M6X2X10X6.6 IS 5370 C Estab
7) HEX HD BOLT M5 15 IS 1364 Description : HEX HD BOLT M5 15 IS 1364() Specification : HEX HD BOLT M5X15 IS:1364 C Estab
8) HEX HD NUT M10() Specification : HEX HD NUT M10 GR-8 IS:1363 C Estab
9) HEX HD NUT Description : HEX HD NUT() Specification : HEX HD NUT M20 IS:1363 GR-8 GALV. & YELLOW PASSIVATED C Estab
10) HEX HEAD HIGH TENSILE BOLT Description : HEX HEAD HIGH TENSILE BOLT() Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL C Estab
11) HEX HEADED BOLT 1/2" BSF Description : HEX HEADED BOLT 1/2" BSF() Specification : HEX HEADED BOLT 1/2" BSF 1 1/2" HIGH TENSILE BOLT C Estab
12) HEX HEADED SCREW M12X25MM Description : HEX HEADED SCREW M12X25MM() Specification : HEX HEADED SCREW M12X25MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8-PL AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT. C Estab
13) HEX SCREW M10 X 20MM() As per Specification/drawing C Estab
14) HEX HEADED SCREW M10 X30() As per Specification/drawing C Estab
15) HEX HEADED SCREW M 8 40 MM Description : HEX HEADED SCREW M 8 40 MM() Specification : HEX HEADED SCREW M8X40 MM TO IS:1364 (PART-2)-8.8-PL-WITH HEX NUT M8 IS:1364 (PART-3)-8-PL C Estab
16) HEX HEADED SCREW M8 16 MM Description : HEX HEADED SCREW M8 16 MM() Specification : HEX HEADED SCREW M8X16 MM TO IS:1364 (PART-2)-8.8-PL C Estab
17) HEX NUT M6 Description : HEX NUT M6() Specification : HEX NUT M6 TO IS:1364-A (PART-III) C Estab
18) M20 X 2.5 X 55MM HEX BOLT() As per Specification/drawing C Estab
19) NUT 3 BY 8 UNF Description : NUT 3 BY 8 UNF() Specification : NUT 3/8" X PCP UNF 3B PLATED C Estab
20) SPHERICAL WASHER AD Description : SPHERICAL WASHER AD() Specification : SPHERICAL WASHER (AD) DRG./PART NO.F-4939515-HD C Estab
21) SET SCREW M14 X 1.5 X 45() As per Specification/drawing C Estab
Category : ddp
Grade : 1
Size : L
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) HEX HD NUT M5 IS1363 Description : HEX HD NUT M5 IS1363() Specification : HEX HD NUT M5 IS:1363 C Estab
2) M20 TWO POINT FIVE 55 MM HEX BOLT Description : M20 TWO POINT FIVE 55 MM HEX BOLT() Specification : M20X2.5X55 MM HEX BOLT GRADE-8.8 GALV & YELLOW PASSIVATED C Estab
3) Spring Washer M 12 B Description : Spring Washer M 12 B() Specification : SPRING WASHER M-12 IS;3063 SPRING WASHER M-12 TYPE 'B' IS : 3063 ZINC PLATED / GALVD & YELLOW PASSIVATED, PART NO. L-4111200 C Estab
4) SPHERICAL WASHER AD Description : SPHERICAL WASHER AD() Specification : SPHERICAL WASHER (AD) DRG./PART NO.F-4939515-HD C Estab
5) Spherical Washer PART NO X4904115 Description : Spherical Washer PART NO X4904115() Specification : SPHERICAL WASHER SPHERICAL WASHER RG./PART NO.X-4904115-HASE C Estab
6) Spherical Seat PART NO X4904215 Description : Spherical Seat PART NO X4904215() Specification : BUSH BOLT SPHERICAL SEAT DRG./PART NO.X-4904215-HASE C Estab
7) BOLT M10 PART NO L1021009 Description : BOLT M10 PART NO L1021009() Specification : BOLT M10 X 45 (102-18) BOLT M10 X 1.5 X 45 (102-18) IS:1364-92 PT-1 P.8.8 GALVD & YELLOW PASSIVATED C Estab
8) BUSH BOLT AGB PART NO X3541715V1 Description : BUSH BOLT AGB PART NO X3541715V1() Specification : BUSH BOLT - AGB ( 102-04) BUSH BOLT - AGB (102-04) DRG./PART NO. X-3541715(V-1) C Estab
9) BUSH BOLT AGB PART NO X3541815 Description : BUSH BOLT AGB PART NO X3541815() Specification : BUSH BOLT - AGB (102-04) BUSH BOLT - AGB (102-04) DRG./PART NO.X-3541815(V-1) Y C Estab
10) BOLT M12 PART NO L1011209 Description : BOLT M12 PART NO L1011209() Specification : BOLT M12 X 1.75 X 45 BOLT M12 X 1.75 X 45 IS : 1364-1992 PT-I P-8.8 GALVD & YELLOW PASSIVATED C Estab
11) BOLT M12 PART NO L1021214 Description : BOLT M12 PART NO L1021214() Specification : BOLT M12X1.5X70 BOLT M12X1.5X70 IS:1364-92, PT-I P-8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L1021214 C Estab
12) Screw M12 PART NO L2021230 Description : Screw M12 PART NO L2021230() Specification : HEX SCREW M12 X 1.5X30 AGB SET SCREW M112 X 1.5 X 30- AGB IS:1364-1992 PT-2 P.8.8 GALVD & YELLOW PASSIVATED C Estab
13) Screw M12 PART NO L2021235 Description : Screw M12 PART NO L2021235() Specification : HEX SCREW M12X1.5x35 (VTS) SET SCREW M12 X 1.5 X 35 IS-1364-1992 PT.II P.8.8 ZINC GALVD & Y. PASSIVATED C Estab
14) Screw M12 PART NO L2021245 Description : Screw M12 PART NO L2021245() Specification : HEX SCREW M12 X 1.5 X 45 HEX SCREW M12 X 1.5 X 45 IS:1364-92-PT.II P.8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L-2021245 C Estab
15) PLAIN NUT M 12 Description : PLAIN NUT M 12() Specification : PLAIN NUT M12 (108-00) PLAIN NUT M12X1.5 (108-00) TO IS-1364-1992 PART-3 P.8 GALV & YELLOW PASSIVATED PT.NO.L-3021218 C Estab
16) Screw M12 PART NO L2011235 Description : Screw M12 PART NO L2011235() Specification : SET SCREW M12 X 1.75 X 35 SET SCREW M12 X 1.75 X 35 IS:1364-1992 PT-II P-8.8 ZINC/GALVD & Y.PASSIVATED C Estab
17) Screw M12 PART NO L2011240 Description : Screw M12 PART NO L2011240() Specification : SET SCREW M12 X 1.75 X 40 SET SCREW M12 X 1.75 X 40 IS:1364-1992 (PT-II) P-8.8 GALVD & YELLOW PASSIVATED L-2011240 C Estab
18) PLAIN NUT M12 X 1 POINT 75 IS 1364 1992 PART 3 P 8 GALVD AND YELLOW PASSIVATED DRG PART NO L 3011218 Description : PLAIN NUT M12 X 1 POINT 75 IS 1364 1992 PART 3 P 8 GALVD AND YELLOW PASSIVATED DRG PART NO L 3011218() Specification : PLAIN NUT M12 X 1.75 IS 1364 1992 PART-3 P 8 GALVD AND YELLOW PASSIVATED DRG PART NO L 3011218 C Estab
19) LPTA PLAIN NUT M12 X 1 75 Description : LPTA PLAIN NUT M12 X 1 75() Specification : PLAIN NUT M12 X 1.75 GALV. & YELLOW PASSIVATED DRG./PART NO. L-3011218 IS -1364-1992 PART - 3, P-8 C Estab
20) LPTA PLAIN NUT M12X15 Description : LPTA PLAIN NUT M12X15() Specification : PLAIN NUT M12 X 1.5 (108-00) GALV. & YELLOW PASSIVATED PART NO. L-3021218 TO IS -1364-1992 PART - 3.P.8 C Estab
21) LPTA Set of WASHER Description : LPTA Set of WASHER() Specification : SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET C Estab
Category : ddp
Grade : 1
Size : L
3134 S.H.Mohd.Ahmed Allawala
1357,Ballimaran, Delhi Delhi
PIN1 : 110006
Phone No. : 011-23954233
GSTIN : 07AEHFS1573H1ZV 		DELM18273D

Download 		1) Ordnance Clothing Factory Shahjahanpur

Debarred
Name Specification Use Status
1) Snap Fastener 7/7() As per Requirements & Specifications C Estab.
2) Fastener Hooks & Loop Tape all sizes and colours() As per Requirements & Specifications C Not Estab.
Category : S
Grade : III
Size : S
3135 Shareen Auto Pvt. Ltd.
Plot No. 117A & 118/2, MIDC Area, Satpur, Nashik Street No. 16 Nashik Maharashtra
PIN1 : 422007
Phone No. : 2350633
GSTIN : 27AAECS0452K1ZB 		NSKS00069G

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) U BOLT FRONT[90]() Specification : U BOLT FRONT DRG. NO. F-3578415V3 PT. NO. F3579715 V3 C Estab
2) U BOLT REAR[90]() Specification : "U" BOLT REAR DRG. NO. F-3578415-V3 PT. NO. F3581915-V3 C Estab
Category : p
Grade : Grade III
Size : M
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) U BOLT FRONT SPRING Description : U BOLT FRONT SPRING() Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A C Estab
2) U BOLT REAR SPRING Description : U BOLT REAR SPRING() Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I] C Estab
Category : dp
Grade : 3
Size : M
3136 DIAMOND BUCKET INDUSTRIES
#38/4C, New Timber Yard Layout, Avalahalli, Mysore Road, Bangalore 560026. BANGALORE Karnataka
PIN1 : 560026
Phone No. : 26742165
GSTIN : 29AACFD1902E1ZY 		AACFD1902E

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) SILENCER/ MUFFLER FOR MPV[90]() Specification : SILENCER/ MUFFLER FOR MPV PART NO. X3967400 C Estab
Category : p
Grade : Grade III
Size : S
3137 ASHOK LEYLAND LIMITED
NO 1 Sardar Patel Road GUINDY CHENNAI Tamil Nadu
PIN1 : 600032
Phone No. : 22206000
GSTIN : 33AAACA4651L1ZT 		AAACA4651L

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Automotive Components for MPV 4X4 MK V as per Annexure A[90]() Specification : Annexure-A C Estab
2) WIDE ANGLE MIRROR F8254500[90]() Specification : AL PART NO. F8254500 C Estab
3) Automotive Components for MPV 4X4 with Left hand drive and manual Transmission as per Annexure A[90]() Specification : Automotive Components for MPV 4X4 with Left hand drive and manual Transmission as per Annexure A C Estab
Category :
Grade : Grade III
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Stallion Flatbed Floor Assy[90]() Specification : 2080-37 01/PD C Nonestab
Category :
Grade : Grade III
Size : L
3138 IMPERIAL FASTNERS PRIVATE LIMITED
BEHRAMPUR ROAD, KHANDSA BEHIND HREC WORKSHOP GURGAON Haryana
PIN1 : 122001
Phone No. : 4268992
GSTIN : 06AAACI0832P1ZJ 		DELI04442E

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) PLAIN NUT M12 X 1 POINT 75 IS 1364 1992 PART 3 P 8 GALVD AND YELLOW PASSIVATED DRG PART NO L 3011218[90]() Specification : PLAIN NUT M12 X 1 POINT 75 IS 1364 1992 PART-3 P 8 GALVD AND YELLOW PASSIVATED DRG PART NO L 3011218 C Nonestab
2) U BOLT FRONT[90]() Specification : U BOLT FRONT DRG. NO. F-3578415V3 PT. NO. F3579715 V3 C Estab
3) U BOLT REAR[90]() Specification : "U" BOLT REAR DRG. NO. F-3578415-V3 PT. NO. F3581915-V3 C Estab
4) HEX HEADED BOLT M 12 X 1.75 X 50 MM[90]() Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT C Nonestab
5) HEX HEADED BOLT 1/2[90]() Specification : HEX HEADED BOLT 1/2" BSF 1 1/2" HIGH TENSILE BOLT C Nonestab
6) HEX HEAD HIGH TENSILE BOLT[90]() Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL C Nonestab
7) Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile[90]() Specification : Hex bolt 3/8 UNF 1 1/2" Bolt with sun lock nut and spring washer, high tensile. C Nonestab
8) HEX HD NUT[90]() Specification : HEX HD NUT M20 IS:1363 GR-8 GALV. & YELLOW PASSIVATED C Nonestab
9) HEX NUT M16 X 2 IS1364[90]() Specification : HEX NUT M16 X 2 IS:1364-(PART-3)-8 C Nonestab
10) NUT CASTLE NUT[90]() Specification : NUT M8.6.019 GOST:5932-73 CASTLE NUT C Nonestab
11) HEX NUT M10 TO IS 1364[90]() Specification : HEX NUT M10 TO IS:1364 (PART-III)-8 C Nonestab
12) SELF LOCK NUTS[90]() Specification : SELF LOCK NUTS M12X1.75 HIGH TENSILE (TVS MAKE) IS:1364 C Nonestab
13) HEX NUT M8 IS 1364[90]() Specification : HEX NUT M8-IS:1364(PART-3)-8 C Nonestab
14) HEX HEAD NUT M12 TO IS1364[90]() Specification : HEX HEAD NUT M12 TO IS:1364 (PART-3)-8-BL C Nonestab
15) BOLT M12 X 1 point 75 X 95[90]() Specification : BOLT M12 X1.75 X 95, IS-1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED C Nonestab
16) HEX SELF LOCK NUT IS 1364[90]() Specification : HEX SELF LOCK NUT (M8) IS:1364 C Nonestab
17) PLAIN WASHER DIA 10 IS 5370[90]() Specification : PLAIN WASHER (DIA 10)/IS:5370 C Nonestab
18) CASTLE NUT M10 IS 2232[90]() Specification : CASTLE NUT (M10)/IS:2232 C Nonestab
19) HEX BOLT IS 1364[90]() Specification : HEX BOLT M20x1.5x40 IS:1364 GRADE 8.8 GLAVANISHED & YELLOW C Nonestab
20) HEX HD BOLT IS1363[90]() Specification : HEX HD BOLT (M10X20L)/IS:1363 C Nonestab
21) HEX HD BOLT M8X25L IS 1363[90]() Specification : HEX. HD. BOLT (M8X25L)/IS:1363 C Nonestab
22) HEX HEADED BOLT M6 1 1 12 MM[90]() Specification : HEX HEADED BOLT M6X1X12 MM TO IS:1364 (PART-1) 8.8-BL C Nonestab
23) HEX HEADED BOLT M 20 45 MM[90]() Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT C Nonestab
24) HIGH TENSILE HEX BOLT[90]() Specification : HIGH TENSILE HEX. BOLT M20X2.5X55 MM LENGTH-IS:1364(PART-2)-8.8 -BL WITH HEX. NUT M20 IS:1364-(PART-3)-8-BL WITH SPRING WASHER A20 IS:3063 Cd PLATED BOLT NUT C Nonestab
25) HEX NUT M6[90]() Specification : HEX NUT M6 TO IS:1364-A (PART-III) C Nonestab
26) HEX HEADED BOLT M12 60[90]() Specification : HEX HEADED BOLT M12 X 60 MM TO IS:1364(PART-1)-8-8-PL C Nonestab
27) BOLT 3 BY 8 X 24 UNF 2A[90]() Specification : BOLT 3/8" X 24 UNF-2A-1.405" LONG AS PER DRAWING DRG. /PART NO. F-3555311-D PHOSPATED C Nonestab
28) HEX HD NUT M5 IS1363[90]() Specification : HEX HD NUT M5 IS:1363 C Nonestab
29) HEX HD BOLT M14 35 IS 1364[90]() Specification : HEX HD BOLT M14X35 IS:1364 GRADE -8.8 C Nonestab
30) NUT 3 BY 8 UNF[90]() Specification : NUT 3/8" X PCP UNF 3B PLATED C Nonestab
31) HEX BOLT M 20 120 MPV[90]() Specification : HEX BOLT M20X120 TO IS:1364 FOR MPV GRADE 8.8 C Nonestab
32) BOLT M 12 20 WITH NUT[90]() Specification : BOLT M12X20 WITH NUT & SPG WASHER GRADE-8.8 C Nonestab
33) HEX HEADED SCREW M8 16 MM[90]() Specification : HEX HEADED SCREW M8X16 MM TO IS:1364 (PART-2)-8.8-PL C Nonestab
34) PLAIN NUT M5 IS1364 PART III P 8 GALVD AND YELLOW PASSIVATED L3010518[90]() Specification : PLAIN NUT M5 IS:1364 PART-III P.8 GALVD & YELLOW PASSIVATED L3010518 C Nonestab
35) HEX HEADED SCREW M 8 40 MM[90]() Specification : HEX HEADED SCREW M8X40 MM TO IS:1364 (PART-2)-8.8-PL-WITH HEX NUT M8 IS:1364 (PART-3)-8-PL C Nonestab
36) HEX HEADED SCREW M 8 25[90]() Specification : HEX HEADED SCREW M8X25 MM IS:1364 (PART-2)-8.8-PL C Nonestab
37) HEX HEADED BOLT M14 2 35 MM[90]() Specification : HEX HEADED BOLTM14X2X35MM TO IS:1364(PART-2)8.8-BL C Nonestab
38) HEX HD BOLT M12 45 IS 1364[90]() Specification : HEX HD BOLT M12X45 IS:1364 GRADE 8.8 GALVANISHED 7 YELLOW PASSIVATED C Nonestab
39) HEX BOLT M 12 40 IS 1364[90]() Specification : HEX BOLT M12X40 IS:1364 GRADE 8.8 GALVANISHED & YELLLOW PASSIVATED C Nonestab
40) BOLT M12 6G 80 46 019 GOST[90]() Specification : BOLT M12-6GX80.46.019 GOST 7795-70 C Nonestab
41) BOLT M 6 20 46 019 GOST 7798 70[90]() Specification : BOLT M6X20.46.019 GOST 7798-70 C Nonestab
42) HEX HD BOLT M5 15 IS 1364[90]() Specification : HEX HD BOLT M5X15 IS:1364 C Nonestab
43) M20 TWO POINT FIVE 55 MM HEX BOLT[90]() Specification : M20X2.5X55 MM HEX BOLT GRADE-8.8 GALV & YELLOW PASSIVATED C Nonestab
44) HEX BOLT M20X50 IS 1364[90]() Specification : HEX BOLT M20X50 IS:1364 GRADE 8.8 GALVANISHED & YELLOW PASSIVATED C Nonestab
45) HEX BOLT M 12 30 IS 1364[90]() Specification : HEX BOLT M12X30 IS:1364 GRADE 8.8 GALVANISED & YELLOW PASSIVATED C Nonestab
46) HEX BOLT M10X30 IS 1364[90]() Specification : HEX BOLT M10X30 IS:1364 GRADE 8.8 GALVAISED & YELLOW PASSIVATED MAKE-TVS, LPS , UNBRAKO. C Nonestab
47) HEX BOLT M10X20 IS 1364[90]() Specification : HEX BOLT M10X20 IS:1364 GRADE 8.8 GALVANISED & YELLOW PASSIVATED MAKE-TVS , LPS , UNBRAKO C Nonestab
48) NYLOC NUT M8 IS 7002 P 8 GALVD AND YELLOW PASSIVATED[90]() Specification : NYLOC NUT M8 IS:7002 P-8 GALVD AND YELLOW PASSIVATED C Nonestab
49) BOLT M20X45 MODIFICATION DRG NO OFPM 640 01 6081 1 A[90]() Specification : BOLT M20X45 (MODIFICATION) DRG.NO.OFPM 640-01-6081-1/A C Nonestab
50) BOLT M12 X 1 POINT 5 X 125 PART NOL1011225 IS 1364 92 PT I P 8 8[90]() Specification : BOLT M12 X 1.5 X 125 PART NO.L1011225.IS:1364-92 PT-I P-8.8 C Nonestab
51) HEX SCREW M6 1 15 IS 1364[90]() Specification : HEX SCREW M6 1 15 IS 1364 C Nonestab
52) HEX BOLT M20 1 POINT 5 40[90]() Specification : GRUB SCREW M6X2X10X6.6 IS 5370 C Nonestab
53) HEX BOLT M 8X20 IS 1364[90]() Specification : HEX BOLT M-8X20 IS:1364 C Nonestab
Category : p
Grade : Grade II
Size : S
3139 STS ENGINEERING SERVICES
NO-458/2A,KARNUR HOSUR TO THALLY ROAD HOSUR Tamil Nadu
PIN1 : 635110
Phone No. : 9994396727
GSTIN : 33AEBPG4404M2ZT 		AEBPG4404M

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) EXHAUST PIPE FOR MPV (ARMY)[90]() Specification : EXHAUST PIPE FOR MPV (ARMY) DRG. NO. - 115-01-0006-1(A) C Estab
2) CONTROL TUBE ASSEMBLY OFPM 610 03 1320 1 B[90]() Specification : CONTROL TUBE ASSEMBLY DRG. NO. 610-03-1320-1/B C Nonestab
Category : p
Grade : Grade III
Size : S
3140 New Star Industries
Budhewal Sugar Mill Road, VPO, Budhewal, Ludhiana Ludhiana Ludhiana Punjab
PIN1 : 141112
Phone No. : 9872990349
GSTIN : 03AABFN1450C1Z4 		JLDN00621F

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) HEX HEAD HIGH TENSILE BOLT[90]() Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL C Estab
2) HEX HD NUT[90]() Specification : HEX HD NUT M20 IS:1363 GR-8 GALV. & YELLOW PASSIVATED C Estab
3) HEX HEADED BOLT M6 1 1 12 MM[90]() Specification : HEX HEADED BOLT M6X1X12 MM TO IS:1364 (PART-1) 8.8-BL C Estab
4) HEX HEADED BOLT M 20 45 MM[90]() Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT C Estab
5) HIGH TENSILE HEX BOLT[90]() Specification : HIGH TENSILE HEX. BOLT M20X2.5X55 MM LENGTH-IS:1364(PART-2)-8.8 -BL WITH HEX. NUT M20 IS:1364-(PART-3)-8-BL WITH SPRING WASHER A20 IS:3063 Cd PLATED BOLT NUT C Estab
6) HEX HEADED SCREW M8 16 MM[90]() Specification : HEX HEADED SCREW M8X16 MM TO IS:1364 (PART-2)-8.8-PL C Estab
7) HEX HD BOLT M12 45 IS 1364[90]() Specification : HEX HD BOLT M12X45 IS:1364 GRADE 8.8 GALVANISHED 7 YELLOW PASSIVATED C Estab
8) HEX BOLT M 12 40 IS 1364[90]() Specification : HEX BOLT M12X40 IS:1364 GRADE 8.8 GALVANISHED & YELLLOW PASSIVATED C Estab
9) HEX BOLT M20X50 IS 1364[90]() Specification : HEX BOLT M20X50 IS:1364 GRADE 8.8 GALVANISHED & YELLOW PASSIVATED C Estab
10) HEX BOLT M 12 30 IS 1364[90]() Specification : HEX BOLT M12X30 IS:1364 GRADE 8.8 GALVANISED & YELLOW PASSIVATED C Estab
Category : p
Grade : Grade III
Size : M
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BOLT M12 X 1 point 75 X 95 Description : BOLT M12 X 1 point 75 X 95() Specification : BOLT M12 X1.75 X 95, IS-1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED C Estab
2) BOLT M8 X 85() Specification : BOLT M8X85 IS:1364 GR-8.8 R Estab
3) BUSH BOLT Description : BUSH BOLT() Specification : BUSH BOLT 3/4" BSF DRG./PART NO.X-3534115(B) C Estab
4) Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile Description : Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile() Specification : Hex bolt 3/8 UNF 1 1/2" Bolt with sun lock nut and spring washer, high tensile. C Estab
5) HEX HD BOLT M14 35 IS 1364 Description : HEX HD BOLT M14 35 IS 1364() Specification : HEX HD BOLT M14X35 IS:1364 GRADE -8.8 C Estab
6) HEX HD NUT M5 IS1363 Description : HEX HD NUT M5 IS1363() Specification : HEX HD NUT M5 IS:1363 C Estab
7) LOCK NUT M 18 Description : LOCK NUT M 18() Specification : LOCK NUT M18X1.5 LOCK NUT M18 X 1.5 DRG./PART NO.F-3545015-HA C Estab
8) M20 TWO POINT FIVE 55 MM HEX BOLT Description : M20 TWO POINT FIVE 55 MM HEX BOLT() Specification : M20X2.5X55 MM HEX BOLT GRADE-8.8 GALV & YELLOW PASSIVATED C Estab
9) NUT 3 BY 8 UNF Description : NUT 3 BY 8 UNF() Specification : NUT 3/8" X PCP UNF 3B PLATED C Estab
10) LOCK NUT M22 Description : LOCK NUT M22() Specification : CHECK NUT M22x1.5 LOCK NUT M22x1.5 DRG./PART NO.F-3592615-2/C C Estab
11) PLAIN NUT M 4() Specification : PLAIN NUT M4 IS:1364 92 PT-III C Estab
12) BOLT M12 X20() Specification : BOLT M12 X 20 WITH NUT & SPG WASHER IS:1364 GR-8.8 C Estab
Category : p
Grade : 2
Size : M
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) ASSY WHEEL NUT M22 Description : ASSY WHEEL NUT M22() Specification : ASSY. WHEEL NUT M22×2.5 PT.NO.F3569510 C Estab
2) NYLOCK NUT 7 by 8 inch Description : NYLOCK NUT 7 by 8 inch() Specification : NYL0CK NUT 7/8 NYLOC NUT 7/8" B.S.F. BS 4929 P-II GALVD & YELLOW PASSIVATED, PART NO.-L-3651411 C Estab
3) NYLOCK NUT PART NO L3611218 Description : NYLOCK NUT PART NO L3611218() Specification : NYLOC NUT M12 (102-12) NYLOC NUT M12X1.75 (102-12) IS : 7002 P.8 GALVD & YELLOW PASSIVATED L3611218 C Estab
4) BOLT M12 PART NO L1011210 Description : BOLT M12 PART NO L1011210() Specification : BOLT M12 X1.75X 50 BOLT M12 X 1.75 X 50 (VTS) IS:1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED PT.NO. L - 1011210 C Estab
5) HEX NUT M 8 Description : HEX NUT M 8() Specification : NUT M8 (VTS) NUT M8 (VTS) IS:1364-1992 PART-III P.8 GALVD & YELLOW PASSIVATED L - 3010818 C Estab
6) Screw M12 PART NO L2021245 Description : Screw M12 PART NO L2021245() Specification : HEX SCREW M12 X 1.5 X 45 HEX SCREW M12 X 1.5 X 45 IS:1364-92-PT.II P.8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L-2021245 C Estab
7) PLAIN NUT M 6 Description : PLAIN NUT M 6() Specification : PLAIN NUT M6 (102-16) PLAIN NUT M6 (102-16) IS:1364-1992 PART-III, P.8 GALVD & YELLOW PASSIVATED, PT. NO. L-3010618 C Estab
8) PLAIN NUT M 10 PART NO L3011018 Description : PLAIN NUT M 10 PART NO L3011018() Specification : PLAIN NUT M10 (102-21) PLAIN NUT M 10 X 1.5 IS:1364-1992 PART-3 P.8 GALVD & YELLOW PASSIVATED C Estab
9) NYLOCK NUT M10 PART NO L3621018 Description : NYLOCK NUT M10 PART NO L3621018() Specification : NYLOC NUT M10 (102-13) NYLOC NUT M10X1.25 (102-13) IS:7002 P-8 GALVD & YELLOW PASSIVATED L - 3621018 C Estab
10) NYLOCK NUT M 6 Description : NYLOCK NUT M 6() Specification : NYLOCK NUT M 6 X 1 NYLOCK NUT M 6 X 1 IS-7002 P-8 GALVD & YELLOW PASSIVATED L3610618 C Estab
11) LOCK NUT M 12X1 Description : LOCK NUT M 12X1() Specification : L0CK NUT M12 X1 LOCK NUT M12 X 1 MM DRG./PT.NO.F-3554115 V1 C Estab
12) NYLOCK NUT M10 PART NO L3611018 Description : NYLOCK NUT M10 PART NO L3611018() Specification : NYLOC NUT M10X1.5 IS:7002 NYLOCK NUT M10 X 1.5 IS:7002 P.8 ALVD & YELLOW PASSIVATED L-3611018 F C Estab
13) Lock Nut M12 Description : Lock Nut M12() Specification : LOCK NUT M12 X 1.75 LOCK NUT M12 X 1.75 IS 1364 PT-III P.8 GALVD & YELLOW PASSIVATED, PART NO.-L-3111218 C Estab
14) NYLOCK NUT M 8 Description : NYLOCK NUT M 8() Specification : NYLOC NUT M8X1 IS:7002 G&Y NYLOC NUT M8 X 1 IS: 7002 G&Y GALVD & YELLOW PASSIVATED, PART NO. L-3620818 C Estab
15) LOCK NUT M22 Description : LOCK NUT M22() Specification : CHECK NUT M22x1.5 LOCK NUT M22x1.5 DRG./PART NO.F-3592615-2/C C Estab
16) LOCK NUT M 18 Description : LOCK NUT M 18() Specification : LOCK NUT M18X1.5 LOCK NUT M18 X 1.5 DRG./PART NO.F-3545015-HA C Estab
Category : p
Grade : 2
Size : M
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) HEX NUT M6 Description : HEX NUT M6() Specification : HEX NUT M6 TO IS:1364-A (PART-III) C Estab
2) HEX NUT M16 X 2 IS1364 Description : HEX NUT M16 X 2 IS1364() Specification : HEX NUT M16 X 2 IS:1364-(PART-3)-8 C Estab
3) HEX HEAD NUT M12 TO IS1364 Description : HEX HEAD NUT M12 TO IS1364() Specification : HEX HEAD NUT M12 TO IS:1364 (PART-3)-8-BL C Estab
4) HEX HEADED SCREW M12X25MM Description : HEX HEADED SCREW M12X25MM() Specification : HEX HEADED SCREW M12X25MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8-PL AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT. C Estab
5) HEX HEADED SCREW M12X1.75X30MM Description : HEX HEADED SCREW M12X1.75X30MM() Specification : HEX HEADED SCREW M12X1.75X30MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8- AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT. C Estab
6) HEX HEAD SCREW M12X50 Description : HEX HEAD SCREW M12X50() Specification : HEX HEAD SCREW M12X50 IS:1364 (PART-2)-8.8 C Estab
7) HEX HEAD SCREW M8X30 Description : HEX HEAD SCREW M8X30() Specification : HEX HEAD SCREW M8X30 IS:1364 (PART-1)-10.9 C Estab
Category : p
Grade : 2
Size : M