DoO(C&S) Vendor Panel | Page ,ab093ac17c35d15faece35d488db6eefb56f8fd0

Warning!

You need to have JavaScript enabled to use this site.

List of registered vendors

Search

Reset

Sort by

Name, Address & Phone No.

Vendor Code

Factory

Products

Category, Grading, Size

3241

Dakshineswari Iron Fpundry
12/1, MADHUSUDAN PAUL CHOWDHURY 1ST LANE HOWRAH WEST BENGAL
PIN1 : 711101
Phone No. : 9804234082

AACFD2512J

Download

1Ordnance Factory Ambajhari

[ENR Registration]

Name	Specification	Use	Status
1) PIN DIAMETER 12 CAT 1256 PIN DIA 12 X 75MM LONG TO DRG NO IMPD0989 Description : PIN DIAMETER 12 CAT 1256 PIN DIA 12 X 75MM LONG TO DRG NO IMPD0989()	Specification : PIN DIAMETER 12 CAT-1256(PIN DIA 12 X 75MM LONG) TO DRG. NO.IMPD0989.	C	Estab

Category : ddp
Grade : 1
Size : S

1Ordnance Factory Katni

[ENR Registration]

Name	Specification	Use	Status
1) CAST IRON MOULD MACHINED SIZE 188 MM DIA X 1375 MM LONG Description : CAST IRON MOULD MACHINED SIZE 188 MM DIA X 1375 MM LONG()	Specification : CAST IRON MOULD MACHINED SIZE: 188 MM DIA X 1375 MM LONG AS PER DRG.NO.12M-559 DT. 26/12/12 IN MACHINE FINISHED CONDITION ON MALE & FEMALE PARTS ARE TO BE TIED TOGETHER & PUNCHED WITH SAME SL. NO. FOR PROPER MATCHING. NO PROTECTIVE COATI	C	Estab
2) CAST IIRON MOULD 254 X 840 MM LONG Description : CAST IIRON MOULD 254 X 840 MM LONG()	Specification : CAST IRON MOULD TO SIZE 254 MM DIA X 840 MM LONG AS PER DRG.NO.12M-543 DT. 21/11/06 WITH AMMENDMENT NO.3116 DATED 11/10/2008 IN MACHINE FINISHED CONDITION. MALE & FEMALE PARTS ARE TO BE TIED TOGETHER & PUNCHED WITH SAME SL. NO. FOR PROPE	C	Estab

Category : p
Grade : 3
Size : S

3242

GEM PRECISION TOOL (P) LTD
15 & 16 DHANALAKSHMI NAGAR EXTENSION SIDHAPUDUR COIMBATORE Tamil Nadu
PIN1 : 641044
Phone No. : 2245679
GSTIN : 33AABCG4030E1ZC

CMBG03251D

Download

1Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) TRACER PLUG ASSEMBLY[01]()	Specification : 1) TRACER PLUG ASSEMBLY (120/125MM) AS PER DRG. NO.ISX20 SA 2) CONSISTING OF COMPONENTS TRACER PLUG (PHOSPHATED) AS PER DRG. NO. ISX328 3) FITTED WITH BRASS DISC AS PER DRG.NO. ISX329	C	Nonestab

Category :
Grade : Grade III
Size : S

1Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) RING[02]()	Specification : AS PER ENCLOSED MONITORING INSTRUCTION	C	Nonestab

Category :
Grade : Grade III
Size : S

1Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) Liner for RGB[01]()	Specification : LINER FOR RGB 60 DRG.NO.NASK 1062/3.L.F.NO.0126701684	C	Nonestab

Category :
Grade : Grade III
Size : S

1Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) STRIP FOR RGB 60[01]()	Specification : AS PER ENCLOSED DRAWING AND QAP	C	Nonestab

Category :
Grade : Grade III
Size : S

1Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) CORE[01]()	Specification : AS per enclosed specification	C	Nonestab
2) CHECK NUT FOR RGB 60[01]()	Specification : As per enclosed specification	C	Nonestab
3) GLAND FOR RGB 60[01]()	Specification : As per enclosed specification	C	Nonestab
4) NUT FOR RGB60[01]()	Specification : As per enclosed specification	C	Nonestab
5) BUSH FOR RGB 60 AS PER DRAWING NO NASK1068[01]()	Specification : AS PER ENCLOSED SPECIFICATION	C	Nonestab
6) BUSH FOR RGB 60 AS PER DRG NO NASK 1068 10[01]()	Specification : AS PER ENCLOSED SPECIFICATION	C	Nonestab
7) DISC MOD 1 FOR RGB 60[01]()	Specification : as per enclosed specification	C	Nonestab
8) SOCKET FOR RGB 60[01]()	Specification : as per enclosed specification	C	Nonestab

Category :
Grade : Grade III
Size : S

1Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) HOLDER[33]()	Specification : SHEET METAL COMPONENT	C	Nonestab

Category :
Grade : Grade III
Size : S

1Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) ASSY CENTRE CONTACT FOR RGB -60[14]()	Specification : AS PER DRAWINGS	C	Nonestab

Category :
Grade : Grade III
Size : S

1Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) END PIECE FOR RGB 60[01]()	Specification : AS PER ENLOSED SPECIFICATION	C	Nonestab

Category :
Grade : Grade III
Size : S

1Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) BUSH FOR RGB 60 AS PER DRG NO NASK 1068 10[01]()	Specification : AS PER ENCLOSED SPECIFICATION	C	Nonestab

Category :
Grade : Grade III
Size : S

1Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) ADAPTER BUSH FOR 81MM AT AL[62]()	Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19	C	Nonestab
2) BUSH FOR 81MM ATAL[62]()	Specification : DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19	C	Nonestab

Category :
Grade : Grade III
Size : S

1Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) DIAPHRAGM NOZZLE PLATE FOR RGB-60[05]()	Specification : AS PER DRAWINGS	C	Estab

Category :
Grade : Grade III
Size : S

1Heavy Vehicle Factory

Name	Specification	Use	Status
1) AVIATION COMPRESSOR AK150C OR AK150CB TO 6206406244[62]()	Specification : AVIATION COMPRESSOR AK150C OR AK150CB TO DRG NO. 155.38.067-1	C	Nonestab

Category :
Grade : Grade III
Size : S

1Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) MACHINING OF PENETRATOR[99]()	Specification : ENCLOSED	R	Estab

Category :
Grade : Grade III
Size : S

1Heavy Vehicle Factory

Name	Specification	Use	Status
1) GLOW PLUG ASSY / 54.42.45CBCB[62]()	Specification : 54.42.45CBCB	E	Nonestab

Category : p
Grade : Grade II
Size : S

1Engine Factory Avadi

[ENR Registration]

Name	Specification	Use	Status
1) compressor air starting pipe line Description : compressor air starting pipe line()	Specification : SB322-009-9	C	Estab
2) Fuel Filter Assy Description : Fuel Filter Assy()	Specification : Cb 329-05-7cb CA3	C	Estab
3) GEAR Description : GEAR()	Specification : 20-05-126-4	C	Estab
4) liner ring Description : liner ring()	Specification : EFA/DDO/SK-1432	C	Estab
5) GAS JT. SEALING RING Description : GAS JT. SEALING RING()	Specification : 20-01-52	C	Estab

Category : ddp
Grade : 2
Size : S

1Engine Factory Avadi

[ENR Registration]

Name	Specification	Use	Status
1) Delivery Valve Description : Delivery Valve()	Specification : Sb 3327-08-1	C	Estab
2) BUSH Description : BUSH()	Specification : 304-13-3 for con rod	C	Estab

Category : ddp
Grade : 2
Size : S

3243

STEEL FORGE (A UNIT OF MOTI PLASTICS & ESTATES PVT LTD)
PLOT NO. 5 SECTOR 6 MAIN MATHURA ROAD FARIDABAD Haryana
PIN1 : 121006
Phone No. : 4061494
GSTIN : 06AAACM1015E1Z9

AAACM1015E

Download

1Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) LPTA Forging for 2nd Speed Gear on Main Shaft[90]()	Specification : Forging 2nd Speed Gear Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 0416 3 (R3)	C	Estab
2) LPTA Forging for 4th Speed Gear on Counter Shaft[90]()	Specification : Forging for 4th Speed Gear on Counter Shaft BS-III LPTA 715 Part No / Drg No 2691 2630 5428 3 (R)	C	Estab
3) LPTA Forging for Drive Shaft Front Axle[90]()	Specification : Foring for Drive Shaft Front Axle Drg No 322 283 0605 3 R1	C	Estab
4) LPTA Forging For 3rd Speed Gear on Main Shaft[90]()	Specification : Forg 3rd Speed Gear On Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 5414 3	C	Estab
5) LPTA Forging for 1st Speed Gear on Main Shaft[90]()	Specification : Forging 1st Speed Gear On Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 5412 3 (R2)	C	Estab
6) LPTA Forging for Gear Front[90]()	Specification : Forging for Gear Front Drg No 312 282 2211 50 R1	C	Estab
7) LPTA Forging for Drive Shaft[90]()	Specification : Forging for Drive Shaft Drg No 322 2820 301 50 ( R1)	C	Estab
8) LPTA Forging for Steering Lever LH RH[90]()	Specification : Forging for Steering Lever LH & RH Part No 312 338 1005- 50 Drg No 312 338 1005 50	C	Estab
9) LPTA Forging for Flange Axle Housing[90]()	Specification : Forging for Flange Axle Housing (Axle Housing) Drg No 2604 3510 5102 3 (R1)	C	Estab
10) LPTA Forging for Steering Arm BS III[90]()	Specification : Forging for Steering Arm BS-III, LPTA 715, Part No / Drg No 2154 3385 600 3	C	Estab
11) LPTA Forging for Gear Rear[90]()	Specification : Forging for Gear Rear Drg No 322 2820 211 50 (R1)	C	Estab
12) LPTA Forging for King Pin Lower[90]()	Specification : Foring for King Pin Lower 340 332 1306 3 (R2)	C	Estab
13) LPTA Forging for Shifter Sleeve AGB[90]()	Specification : Foring for Shifter Sleeve AGB Drg No 322 2820 123 R1	C	Estab
14) LPTA Forging for Cont Mesh Gear on Counter Shaft[90]()	Specification : Forging for Constant Mesh Gear on Counter Shaft BS-III LPTA 715 Part No / Drg No 2691 2630 5413 3	C	Estab
15) LPTA Forging for King Pin Upper[90]()	Specification : Foring for King Pin Upper Part No 2574 3325 5102 3 R2	C	Estab
16) LPTA Forging for Main Shaft[90]()	Specification : Forging for Main Shaft BS-III LPTA 715 Part No 2691 2620 7911 3	C	Estab
17) LPTA Forging for Counter Shaft GB[90]()	Specification : Foring for Counter Shaft BS-III LPTA 715 Part No 2691 2630 0405 3	C	Estab
18) LPTA Forging for Follower[90]()	Specification : Forging for Follower 00322 337 0417 50	C	Estab
19) LPTA Forging for Coupling Flange RXL[90]()	Specification : Forging for Coupling Flange Part No 2730 3530 5001 3	C	Estab
20) LPTA Forging for Coupling Flange AGB[90]()	Specification : Forging for Coupling Flange DRG No 312 262 2045 3 (A)	C	Estab
21) LPTA Forging For 3rd Speed Gear on Counter Shaft[90]()	Specification : 3rd Speed Counter Shaft (Forging) LPTA-715 Vehilce Part No / Drg No 2691 2630 5424 3	C	Estab

Category : p
Grade : Grade III
Size : S

1Vehicle Factory Jabalpur

[ENR Registration]

Name	Specification	Use	Status
1) FORGING FOR OUT PUT SHAFT FT Description : FORGING FOR OUT PUT SHAFT FT()	Specification : FORGING FOR OUT PUT SHAFT FRONT, DRG. NO.PS3344611(R2)	C	Estab
2) FORG FOR LAY SHAFT STLN BS 3 Description : FORG FOR LAY SHAFT STLN BS 3()	Specification : FORG. FOR LAY SHAFT, STLN.-BS-III, PART NO. X3303211-3(R1)	C	Estab
3) FORG FOR INPUT SHAFT STLN BS 3 Description : FORG FOR INPUT SHAFT STLN BS 3()	Specification : FORG. FOR INPUT SHAFT, STLN.-BS-III, PART NO. X3303611-3(R1)	C	Estab
4) FORG FOR GEAR ON LAY SHAFT GEAR LAY SHAFT Description : FORG FOR GEAR ON LAY SHAFT GEAR LAY SHAFT()	Specification : FORG. FOR GEAR ON LAY SHAFT/GEAR LAY SHAFT, STLN- BS-III, PART NO. X1602611-3(R2)	C	Estab
5) FORG FOR GEAR INPUT HIGH BS 3 Description : FORG FOR GEAR INPUT HIGH BS 3()	Specification : FORG. FOR GEAR INPUT HIGH, STLN- BS-III, PART NO. X1601211-3(R1)	C	Estab
6) FORG FOR DRIVING SHAFT Description : FORG FOR DRIVING SHAFT()	Specification : FORGING FOR DRIVING SHAFT, .FXL.PT.NO. SD9056311(R2)	C	Estab
7) FORG DRIVING FLANGE Description : FORG DRIVING FLANGE()	Specification : FORGING FOR DRIVING FLANGE DRG.NO. PS1433111(R1)	C	Estab
8) FORG FOR RING FOR OIL SEAL INNER Description : FORG FOR RING FOR OIL SEAL INNER()	Specification : FORGING FOR RING FOR OIL SEAL INNER, DRG. No.F 0741111-3	C	Estab
9) FORG FOR ACTUATER Description : FORG FOR ACTUATER()	Specification : FORGING FOR ACTUATER, DRG. No. Z-1802911(R1) PART NO. X1802911	C	Estab
10) FORGING FOR PIN Description : FORGING FOR PIN()	Specification : FORGING FOR PIN, DRG. No. PS-0932111	C	Estab
11) FORG FOR HUB END Description : FORG FOR HUB END()	Specification : FORG.FOR HUB FOR STG. PIVOT, DRG. No. Z1803211- (R2)	C	Estab
12) FORG FOR DISTANCE RING Description : FORG FOR DISTANCE RING()	Specification : FORGING FOR DISTANCE RING, DRG. NO. Z 1201311 -A	C	Estab
13) FORG FOR THRUST COLLAR RING Description : FORG FOR THRUST COLLAR RING()	Specification : FORGING FOR THRUST COLLAR/RING, DRG. No. X 3402115 -3B	C	Estab
14) FORG FOR RING FOR OIL SEAL OUTER Description : FORG FOR RING FOR OIL SEAL OUTER()	Specification : FORGING FOR RING FOR OIL SEAL OUTER, DRG. No. F 0741011 -3	C	Estab
15) Lay Shaft Forge-X3303211-3 Description : Lay Shaft Forge-X3303211-3()	Specification : As per specification / Drawings	C	Estab
16) FORG FOR 4th GEAR ON LAY SHAFT Description : FORG FOR 4th GEAR ON LAY SHAFT()	Specification : FORG.FOR 4th GEAR ON LAY SHAFT, STLN- BS-III, PART NO. F1607211-3	C	Estab
17) FORG FOR 3rd GEAR ON LAY SHAFT Description : FORG FOR 3rd GEAR ON LAY SHAFT()	Specification : FORG.FOR 3rd GEAR ON LAY SHAFT, STLN-BS-III, PART NO. F1668611-3	C	Estab
18) FORG FOR 5th GEAR ON LAY SHAFT Description : FORG FOR 5th GEAR ON LAY SHAFT()	Specification : FORGING FOR(5th GEAR ON LAY SHAFT) HELICAL GEAR STLN -BS-III, PART NO. F 1668711-3	C	Estab
19) FORG FOR CONSTANT MESH GEAR LAY SHAFT Description : FORG FOR CONSTANT MESH GEAR LAY SHAFT()	Specification : FORGING FOR(CONST.MESH GEAR) HELICAL GEAR LAY SHAFT, STLN-BS-III, PT. NO. F 1668511-3	C	Estab
20) FORG FOR MAIN SHAFT STLN BS 3 Description : FORG FOR MAIN SHAFT STLN BS 3()	Specification : FORGING FOR MAIN SHAFT STLN- BS-III, DRG. NO. F3318711-3	C	Estab
21) FORG FOR SLEEVE STLN BS III F3424215 3 R1 Description : FORG FOR SLEEVE STLN BS III F3424215 3 R1()	Specification : FORG. FOR SLEEVE. STLN- BS-III ,PART NO. F3424215-3(R1)	C	Estab
22) FORG FOR SLEEVE STLN BS III F3427015 3 R1 Description : FORG FOR SLEEVE STLN BS III F3427015 3 R1()	Specification : FORG. FOR SLEEVE, STLN- BS-III, PART NO. F3427015-3(R1) ON 4th GR.M/S	C	Estab
23) FORG FOR REVERSE GEAR WHEEL ON MAIN SHAFT Description : FORG FOR REVERSE GEAR WHEEL ON MAIN SHAFT()	Specification : FORGING FOR REVERSE GEAR ON MAIN SHAFT, STLN-BS-III, PART NO. F1668311-3	C	Estab
24) FORG FOR OUTPUT FLANGE BS 3 Description : FORG FOR OUTPUT FLANGE BS 3()	Specification : FORG FOR OUT PUT FLANGE, STLN- BS-III, PT. NO. F1402311-3	C	Estab
25) FORG FOR REVERSE IDLER GEAR BS 3 Description : FORG FOR REVERSE IDLER GEAR BS 3()	Specification : FORG FOR REVERSE IDLER GEAR , STLN- BS-III, PT. NO. F8A02611-3	C	Estab
26) FORG FOR 1st GEAR ON MAIN SHAFT Description : FORG FOR 1st GEAR ON MAIN SHAFT()	Specification : FORGING FOR 1st GEAR ON MAIN SHAFT, STLN- BS-III, PT. NO. F1668011-3	C	Estab
27) FORG FOR 2nd GEAR ON MAIN SHAFT Description : FORG FOR 2nd GEAR ON MAIN SHAFT()	Specification : FORGING FOR 2nd GEAR ON MAIN SHAFT, STLN- BS-III, PART NO. F1609711-3	C	Estab
28) FORG FOR INPUT SHAFT PINION Description : FORG FOR INPUT SHAFT PINION()	Specification : FORG.FOR INPUT SHAFT STLN- BS-III, PART NO. DRG.NO. F3311611-3	C	Estab
29) FORG FOR 3rd GEAR ON MAIN SHAFT Description : FORG FOR 3rd GEAR ON MAIN SHAFT()	Specification : FORGING FOR 3rd GEAR ON MAIN SHAFT, STLN- BS-III, PART NO. F1668811-3	C	Estab
30) FORG FOR OD GEAR ON MAIN SHAFT Description : FORG FOR OD GEAR ON MAIN SHAFT()	Specification : FORGING FOR OD GEAR ON MAIN SHAFT, STLN-BS-III, PART NO. F1609911, DRG.NO.F8A04711-3	C	Estab
31) LPTA Forging for Rev Idler Gear Description : LPTA Forging for Rev Idler Gear()	Specification : Forging for Reverse Idler Gear LPTA 715 BS-III Part No 2691 2635 5407 3 (R1)	C	Estab

Category : p
Grade : 3
Size : S

1Ordnance Factory Medak

[ENR Registration]

Name	Specification	Use	Status
1) Forging bush 765-50-2649 Description : Forging bush 765-50-2649()	Specification : As per Drawing	C	Estab
2) HOLDER Description : HOLDER()	Specification : AS PER DRAWINGS 765-34-3	C	Estab

Category : p
Grade : 3
Size : S

1Ordnance Factory Medak

[ENR Registration]

Name	Specification	Use	Status
1) Forging bush 765-50-2649 Description : Forging bush 765-50-2649()	Specification : As per Drawing	C	Estab
2) HOLDER Description : HOLDER()	Specification : AS PER DRAWINGS 765-34-3	C	Estab

Category : p
Grade : 3
Size : S

1Ordnance Factory Medak

[ENR Registration]

Name	Specification	Use	Status
1) Forging bush 765-50-2649 Description : Forging bush 765-50-2649()	Specification : As per Drawing	C	Estab
2) HOLDER Description : HOLDER()	Specification : AS PER DRAWINGS 765-34-3	C	Estab

Category : p
Grade : 3
Size : S

3244

R. J.METAL INDUSTRIES
3RD LANE,PANCHAYAT ROAD,VILL.-BODAI,P.O.-JUGBERIA, KOLKATA WEST BENGAL
PIN1 : 700110
Phone No. : 9830531382
GSTIN : 19ADCPD2551L1ZM

ADCPD2551L

Download

1Gun Carriage Factory

[ENR Registration]

Name	Specification	Use	Status
1) Copper & Copper based alloys Description : Copper & Copper based alloys()	Specification : As per GCF Drg / Size/Specn	R	Estab
2) Copper Rods: 10mm To 80mm Round,10mm To 65mm Square,10mm To 50mm Hexagon. Description : Copper Rods: 10mm To 80mm Round,10mm To 65mm Square,10mm To 50mm Hexagon.()	Specification : IS: 288, BS:2874-86	R	Estab

Category : ddp
Grade : 3
Size : O

3245

DAVIS ENGINEERING WORKS
RAMDASHATI,GARDEN REACH, KOLKATA WEST BENGAL
PIN1 : 700024
Phone No. : 9830930239

AJWPD4425H

Download

1Gun Carriage Factory

[ENR Registration]

Name	Specification	Use	Status
1) Gaskets Description : Gaskets()	Specification : As per GCF/Drg/Size/Specn/IS	C	Estab
2) O Rings of Different sizes Description : O Rings of Different sizes()	Specification : As per Customer Specification.	C	Estab
3) Canvas items viz; cover Guns, cover muzzles, Cover breech cover carriage Description : Canvas items viz; cover Guns, cover muzzles, Cover breech cover carriage()	Specification : As per Drawing /Specification of Customers. .	C	Estab

Category : p
Grade : 3
Size : O

3246

Sakshi industries
L-18/8 (part) L-48 (part),waluj MIDC WALUJ MIDC AUrangabad Maharashtra
PIN1 : 431136
Phone No. : 2551212
GSTIN : 27AGHPB6785E1ZB

NSKD02549B

Download

1Ordnance Factory Bhusawal

Name	Specification	Use	Status
1) Neck for metallic container for TU33E[01]()	Specification : AS PER DRAWING NO. OFBHSK/1532	C	Nonestab

Category :
Grade : Grade III
Size : S

1Ordnance Factory Bhusawal

Name	Specification	Use	Status
1) Neck for metallic container for TU33E[01]()	Specification : AS PER DRAWING NO. OFBHSK/1532	C	Nonestab

Category :
Grade : Grade III
Size : S

1Ordnance Factory Bhusawal

Name	Specification	Use	Status
1) Neck for metallic container for TU33E[01]()	Specification : AS PER DRAWING NO. OFBHSK/1532	C	Nonestab

Category :
Grade : Grade III
Size : S

3247

Cordoba Engineering Pvt. Ltd.
NS/3, Ist Phase, Adityapur Industrial Area Jamshedpur Jharkhand
PIN1 : 832109
Phone No. : 09334082878
GSTIN : 20AABCC0348K1Z5

RCHC00201F

Download

1Vehicle Factory Jabalpur

[ENR Registration]

Name	Specification	Use	Status
1) LPTA ASSY SPACER BLOCK Description : LPTA ASSY SPACER BLOCK()	Specification : ASSY.SPACER BLOCK PT NO 9051200000-V3	C	Estab
2) LPTA Assy Ft Cross Member Eng Mtg Comp Description : LPTA Assy Ft Cross Member Eng Mtg Comp()	Specification : ASSY FRONT CROSS MEMBER ENGINE MTG. COMP. PART NO. 215431200126NRLPTA-715, BS-III VEHICLE V1	C	Estab

Category : dp
Grade : 3
Size : M

3248

GALAXY ENTERPRISES
A/13 oldwasherman pet Goldsmith tank street Chennai Tamil Nadu
PIN1 : 600021
Phone No. : 9840855778
GSTIN : 33AAEFG4486A1ZR

CHEG14598D

Download

1Engine Factory Avadi

[ENR Registration]

Name	Specification	Use	Status
1) STEEL PACKING CASE Description : STEEL PACKING CASE()	Specification : CQA(HV) SK-01	E	Estab
2) Steel Packing case. Description : Steel Packing case.()	Specification : Steel Packing case.	E	Estab
3) Exhaust Manifold Description : Exhaust Manifold()	Specification : SB 418-00-6	C	Estab
4) Inlet Manifold Description : Inlet Manifold()	Specification : SB 20-19-00-1	C	Estab

Category : ddp
Grade : 1
Size : S

1Engine Factory Avadi

[ENR Registration]

Name	Specification	Use	Status
1) steel packing case Description : steel packing case()	Specification : SK/706,706,708,709	E	Estab
2) Steel Packing case. Description : Steel Packing case.()	Specification : CQA(HV)-SK01/CONTAINER	E	Estab
3) Exhaust Manifold Description : Exhaust Manifold()	Specification : SB 418-00-6	C	Estab
4) Inlet Manifold Description : Inlet Manifold()	Specification : SB 20-19-00-1	C	Estab

Category : ddp
Grade : 1
Size : S

3249

PREMIER CARBON INDUSTRIES
7A ATHIPET MAIN ROAD AMBATTUR ATHIPET MAIN ROAD CHENNAI TAMIL NADU
PIN1 : 600058
Phone No. : 9381075250

CHEPOO913D

Download

1Engine Factory Avadi

[ENR Registration]

Name	Specification	Use	Status
1) Brush Holder Description : Brush Holder()	Specification : 555-182-H	C	Estab
2) Sealing Washer Description : Sealing Washer()	Specification : As per Drg. No. 411-13-10	C	Estab

Category : dp
Grade : 1
Size : S

3250

Super Steel Forgings
Plot No.15, Sector - 4, Ballabhgarh Faridabad Haryana
PIN1 : 121004
Phone No. : 0129-2242447

RTKS06045E

Download

1Vehicle Factory Jabalpur

[ENR Registration]

Name	Specification	Use	Status
1) FORG FOR INPUT SHAFT STLN BS 3 Description : FORG FOR INPUT SHAFT STLN BS 3()	Specification : FORG. FOR INPUT SHAFT, STLN.-BS-III, PART NO. X3303611-3(R1)	C	Estab
2) FORG FOR SPUR GEAR GEAR INPUT LOW Description : FORG FOR SPUR GEAR GEAR INPUT LOW()	Specification : FORG. FOR GEAR INPUT LOW, STLN- BS-III, PT. NO. X1602411-3 (R1)	C	Estab
3) FORG FOR GEAR INPUT HIGH BS 3 Description : FORG FOR GEAR INPUT HIGH BS 3()	Specification : FORG. FOR GEAR INPUT HIGH, STLN- BS-III, PART NO. X1601211-3(R1)	C	Estab
4) FORG FOR DRIVING SHAFT Description : FORG FOR DRIVING SHAFT()	Specification : FORGING FOR DRIVING SHAFT, .FXL.PT.NO. SD9056311(R2)	C	Estab
5) FORG DRIVING FLANGE Description : FORG DRIVING FLANGE()	Specification : FORGING FOR DRIVING FLANGE DRG.NO. PS1433111(R1)	C	Estab
6) FORG FOR ACTUATER Description : FORG FOR ACTUATER()	Specification : FORGING FOR ACTUATER, DRG. No. Z-1802911(R1) PART NO. X1802911	C	Estab
7) FORGING FOR PIN Description : FORGING FOR PIN()	Specification : FORGING FOR PIN, DRG. No. PS-0932111	C	Estab
8) FORG FOR REVERSE GEAR WHEEL ON MAIN SHAFT Description : FORG FOR REVERSE GEAR WHEEL ON MAIN SHAFT()	Specification : FORGING FOR REVERSE GEAR ON MAIN SHAFT, STLN-BS-III, PART NO. F1668311-3	C	Estab
9) FORG FOR OUTPUT FLANGE BS 3 Description : FORG FOR OUTPUT FLANGE BS 3()	Specification : FORG FOR OUT PUT FLANGE, STLN- BS-III, PT. NO. F1402311-3	C	Estab
10) FORG FOR 1st GEAR ON MAIN SHAFT Description : FORG FOR 1st GEAR ON MAIN SHAFT()	Specification : FORGING FOR 1st GEAR ON MAIN SHAFT, STLN- BS-III, PT. NO. F1668011-3	C	Estab
11) FORG FOR 4th GEAR ON MAIN SHAFT Description : FORG FOR 4th GEAR ON MAIN SHAFT()	Specification : FORG.FOR 4th GEAR ON MAIN SHAFT, STLN- BS-III,PART NO./DRG.NO.F1668911-3	C	Estab
12) LPTA Forging for 4th Speed Gear on Counter Shaft Description : LPTA Forging for 4th Speed Gear on Counter Shaft()	Specification : Forging for 4th Speed Gear on Counter Shaft BS-III LPTA 715 Part No / Drg No 2691 2630 5428 3 (R)	C	Estab
13) LPTA Forging for 4th Speed Gear on Main Shaft Description : LPTA Forging for 4th Speed Gear on Main Shaft()	Specification : Forg 4th Speed Gear On Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 5421 3	C	Estab
14) LPTA Forging for Main Shaft Description : LPTA Forging for Main Shaft()	Specification : Forging for Main Shaft BS-III LPTA 715 Part No 2691 2620 7911 3	C	Estab
15) LPTA Forging for Coupling Flange AGB Description : LPTA Forging for Coupling Flange AGB()	Specification : Forging for Coupling Flange DRG No 312 262 2045 3 (A)	C	Estab

Category : p
Grade : 2
Size : S

1Gun and Shell Factory

[ENR Registration]

Name	Specification	Use	Status
1) LEVER IN FORGED CONDITION TO DRG NO F 2283 Description : LEVER IN FORGED CONDITION TO DRG NO F 2283()	Specification : LEVER IN FORGED CONDITION TO DRG NO F-2283	R	Estab

Category : p
Grade : 3
Size : S

3251

PITAMBERA POLYMERSINDUSTRIES PRIVATE LIMITED
5F, EVEREST 46/C, CHOWRINGHEE ROAD KOLKATA WEST BENGAL
PIN1 : 700071
Phone No. : 9326245336
GSTIN : 27AABCP6924G1ZD

NGPP00404F

Download

1Ammunition Factory Khadki

[ENR Registration]

Name	Specification	Use	Status
1) PLASTIC POWER PISTON W/O POUCH 65MM Description : PLASTIC POWER PISTON W/O POUCH 65MM()	Specification : AFK DRG.NO. KF/SK-1809	R	Estab

Category : p
Grade : 3
Size : S

3252

Vako Seals Pvt.Ltd
3/4, KRDN Trust Estate, Pravasi Indl. Estate Off-Aarey Road Goregaon(E), Mumbai Maharashtra
PIN1 : 400063
Phone No. : 022-40371234
GSTIN : 27AACCV0100D1Z4

MUMV12162D

Download

1Engine Factory Avadi

[ENR Registration]

Name	Specification	Use	Status
1) Rubber Gaskets, metal bonded items. Description : Rubber Gaskets, metal bonded items.()	Specification : Up to 150 x 150 x 50mm in size.	P	Estab

Category : ddp
Grade : 1
Size : S

3253

CBS TECHNOLOGIES PVT.LTD
H5-6 SIDE-V UPSIDC IND AREA KASNA GREATER NOIDA UP IND AREA KASNA NOIDA UTTAR PRADESH
PIN1 : 201310
Phone No. : 8826994629

DELC06019C

Download

1Engine Factory Avadi

[ENR Registration]

Name	Specification	Use	Status
1) MOUNTING OF CENTRIFUGAL OIL CLEANER Description : MOUNTING OF CENTRIFUGAL OIL CLEANER()	Specification : SB 20-13-00-9	S	Estab
2) CENTRIFUGAL OIL CLEANER Description : CENTRIFUGAL OIL CLEANER()	Specification : SB 447-00-1	S	Estab

Category : ddp
Grade : 1
Size : S

3254

BALAJI UDYOG
56/30/1, SITE IV SHAIBABAD INDUSTRIAL AREA GHAZIABAD UTTAR PRADESH
PIN1 : 201501
Phone No. : 8130199655
GSTIN : 09AFVPP9102N2Z1

AFVPP9102N

Download

1Ammunition Factory Khadki

[ENR Registration]

Name	Specification	Use	Status
1) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 SPECN. DGOF 135()	Specification : DGOF 135 (A)	C	Estab

Category : p
Grade : 3
Size : S

1Ammunition Factory Khadki

[ENR Registration]

Name	Specification	Use	Status
1) TAIL UNIT 8A WITH CAP ARDE-1933 D-7()	Specification : CQA(A) 2324	R	Estab
2) FILLING HOLE PLUG(ALUMN)()	Specification : CQA(A)1504	R	Estab

Category : p
Grade : 3
Size : S

3255

AVR Fasteners Private Limited
D-37, Industrial Area, Focal Point, P.O.-Mubarikpur Derabassi Punjab
PIN1 : 140201
Phone No. : 01762-282017
GSTIN : 03AABCA2758D1Z8

PTLA11900B

Download

1Vehicle Factory Jabalpur

[ENR Registration]

Name	Specification	Use	Status
1) Set Screw M6X30 Description : Set Screw M6X30()	Specification : HEX SCREW M6 X30 (102-00) SET SCREW M6 X30 (102-00) IS : 1364-1992 PT-II P.8.8 GALVD & YELLOW PASSIVATED	C	Estab
2) BOLT M8 PART NO L1010816 Description : BOLT M8 PART NO L1010816()	Specification : BOLT M8 X1.25 X80 BOLT M8 X 1.25 X 80 (102-18) IS - 1364-92 PT-I P-8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L-1010816	C	Estab
3) BOLT M12 PART NO L1011209 Description : BOLT M12 PART NO L1011209()	Specification : BOLT M12 X 1.75 X 45 BOLT M12 X 1.75 X 45 IS : 1364-1992 PT-I P-8.8 GALVD & YELLOW PASSIVATED	C	Estab
4) HEX SCREW M10 PART NO L2011020 Description : HEX SCREW M10 PART NO L2011020()	Specification : HEX SCREW M10 X 1.5X20 (104-ED HEX SCREW M10 X 1.5 X 20 IS:1364-1992 PT-2 P.8.8 GALVD & YELLOW PASSIVATED	C	Estab
5) Screw M12 PART NO L2021230 Description : Screw M12 PART NO L2021230()	Specification : HEX SCREW M12 X 1.5X30 AGB SET SCREW M112 X 1.5 X 30- AGB IS:1364-1992 PT-2 P.8.8 GALVD & YELLOW PASSIVATED	C	Estab
6) Set Screw M8X35 Description : Set Screw M8X35()	Specification : HEX SCREW M8 X1 X 35 (102-01) SET SCREW M8 X 35 (102-01) IS:1364-92 PT-II P-8.8 GALVD & YELLOW PASSIVATED, PT. No. L-2010835	C	Estab
7) Screw M12 PART NO L2011225 Description : Screw M12 PART NO L2011225()	Specification : SET SCREW M12X1.75X25 SET SCREW M12X1.75X25 IS-1364-1992 PT-2 P.8.8 ZINC GALVD & YELLOW PASSIVATED	C	Estab
8) Screw M12 PART NO L2011235 Description : Screw M12 PART NO L2011235()	Specification : SET SCREW M12 X 1.75 X 35 SET SCREW M12 X 1.75 X 35 IS:1364-1992 PT-II P-8.8 ZINC/GALVD & Y.PASSIVATED	C	Estab
9) Screw M12 PART NO L2021240 Description : Screw M12 PART NO L2021240()	Specification : SET SCREW M12 X 1.5 X 40 SET SCREW M12 X 1.5 X 40 (102-02) L - 2021240 IS-1364-92 PT.2 P.8.8 GALVD & YELLOW PASSIVATED	C	Estab
10) Screw M12 PART NO L2011240 Description : Screw M12 PART NO L2011240()	Specification : SET SCREW M12 X 1.75 X 40 SET SCREW M12 X 1.75 X 40 IS:1364-1992 (PT-II) P-8.8 GALVD & YELLOW PASSIVATED L-2011240	C	Estab
11) Hex Screw M8 Description : Hex Screw M8()	Specification : HEX SCREW M8X1.25X 20 (102-06) HEX SCREW M8 X 1.25 X 20 IS:1364-1992 PT-2 P.8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L2010820	C	Estab

Category : p
Grade : 2
Size : S

1Vehicle Factory Jabalpur

[ENR Registration]

Name	Specification	Use	Status
1) BOLT M12 X 1 POINT 5 X 125 PART NOL1011225 IS 1364 92 PT I P 8 8 Description : BOLT M12 X 1 POINT 5 X 125 PART NOL1011225 IS 1364 92 PT I P 8 8()	Specification : BOLT M12 X 1.5 X 125 PART NO.L1011225.IS:1364-92 PT-I P-8.8	C	Estab

Category : p
Grade : 2
Size : S

1Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) BOLT M10 PART NO L1021009[90]()	Specification : BOLT M10 X 45 (102-18) BOLT M10 X 1.5 X 45 (102-18) IS:1364-92 PT-1 P.8.8 GALVD & YELLOW PASSIVATED	C	Estab
2) BOLT M12 PART NO L1011228[90]()	Specification : BOLT M12 X 1.75 X 140 BOLT M12 X 1.75 X 140 IS:1364-92 PT-I P-8.8 GALVD & YELLOW PASSIVATED L-1011228	C	Estab
3) BOLT M12 PART NO L1011210[90]()	Specification : BOLT M12 X1.75X 50 BOLT M12 X 1.75 X 50 (VTS) IS:1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED PT.NO. L - 1011210	C	Estab
4) BOLT M12 PART NO L1021214[90]()	Specification : BOLT M12X1.5X70 BOLT M12X1.5X70 IS:1364-92, PT-I P-8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L1021214	C	Estab
5) Set Screw M8X30[90]()	Specification : HEX SCREW M8 X 30 (104-ED) SET SCREW M8 X 30 (104-ED) IS:1364-92 PT-II P-8.8 GALVD & YELLOW PASSIVATED	C	Estab
6) SCREW PART NO L2011035[90]()	Specification : HEX SCREW M10 X 1.5 X 35 SET SCREW M10 X 1.5 X 35 IS-1364-1992 PART-II P.8.8 GALVD & YELLOW PASSIVATED	C	Estab
7) Set Screw M6X40[90]()	Specification : HEX SCREW M6 X40 (102-00) SET SCREW M6 X40 (102-00) IS : 1364-1992 PT-II P.8.8 GALVD & YELLOW PASSIVATED	C	Estab
8) Set Screw M8X25[90]()	Specification : HEX SCREW M8 X25 (102-22) SET SCREW M8 X25 IS-1364-1992 PART-II P.8.8 GALVD & YELLOW PASSIVATED	C	Estab
9) SCREW M10 PART NO L2021030[90]()	Specification : HEX SCREW M10 X 1.25 X 30 SET SCREW M10 X 1.25 X 30 (102-17) IS:1364:1992 PT-II P-8.8 GALVD & YELLOW PASSIVATED	C	Estab
10) Set Screw M 6X1X20[90]()	Specification : HEX SCREW M6 X 20 (102-16) SET SCREW M6 X 1 X 20 IS:1364-1992 PT.2 P.8.8 GALVD & YELLOW PASSIVATED L-2010620	C	Estab
11) Set Screw M6x25[90]()	Specification : HEX SCREW M6 X25 (104-ED) SET SCREW M6 X25 (104-ED) IS:1364-92 PT-II P-8.8 GALVD & YELLOW PASSIVATED L - 2010625	C	Estab
12) SCREW M10 PART NO L2011030[90]()	Specification : HEX SCREW M10 X 1.5 X 30 SET SCREW M10X1.5X30(102-21) IS-1364-1992 PT-II P.8.8 CALVD & YELLOW PASSIVATED	C	Estab

Category : p
Grade : Grade III
Size : S

3256

ASOKA SKY METALS PRIVATE LIMITED
M-2(P), VII TH PHASE, INDUSTRIAL AREA, TATA KANDRA MAIN ROAD, ADITYAPUR, JAMSHEDPUR TATA KANDRA MAIN ROAD JAMSHEDPUR Jharkhand
PIN1 : 831013
Phone No. : 2200066
GSTIN : 20AAKCA9139R1Z5

RCHA01850C

Download

1Ordnance Factory Bhusawal

Name	Specification	Use	Status
1) SM CRCA COIL 1.25 x 1250 MM D 'K'[02]()	Specification : SM CRCA COIL 1.25 x 1250 MM D 'K'	R	Estab
2) SM CRCA COIL 1.6 x 1250 MM 'D'K[07]()	Specification : SM CRCA COIL 1.6 x 1250 MM 'D'K	R	Estab
3) SM CRCA COIL 1.00 x 1250 MM 'D'K[07]()	Specification : SM CRCA COIL 1.00 x 1250 MM 'D'K	R	Estab
4) SM CRCA COIL 0.63 x 1250 MM 'D'K[07]()	Specification : SM CRCA COIL 0.63 x 1250 MM 'D'K	R	Estab
5) SM CRCA COIL 1.6 X 73.5 MM[02]()	Specification : SM CRCA COIL 1.6 X 73.5 MM	R	Estab
6) SM CRCA COIL 0.8 MM X 1000[07]()	Specification : SM CRCA COIL 0.8 MM X 1000	R	Estab
7) SM CRCA COIL 1.00 MM X 1080 MM[07]()	Specification : SM CRCA COIL 1.00 MM X 1080 MM	R	Estab

Category :
Grade : Grade III
Size : S

1Ordnance Factory Bhusawal

Name	Specification	Use	Status
1) SM CRCA COIL 1.25 x 1250 MM D 'K'[02]()	Specification : SM CRCA COIL 1.25 x 1250 MM D 'K'	R	Estab
2) SM CRCA COIL 1.6 x 1250 MM 'D'K[07]()	Specification : SM CRCA COIL 1.6 x 1250 MM 'D'K	R	Estab
3) SM CRCA COIL 1.00 x 1250 MM 'D'K[07]()	Specification : SM CRCA COIL 1.00 x 1250 MM 'D'K	R	Estab
4) SM CRCA COIL 0.63 x 1250 MM 'D'K[07]()	Specification : SM CRCA COIL 0.63 x 1250 MM 'D'K	R	Estab
5) SM CRCA COIL 0.8 MM X 1000[07]()	Specification : SM CRCA COIL 0.8 MM X 1000	R	Estab

Category :
Grade : Grade III
Size : S

1Ordnance Factory Bhusawal

Name	Specification	Use	Status
1) 9911839207 SM CRCA SHEET D SK 2X1250X2500[99]()	Specification : AS PER OFBH SPECIFICATION	R	Nonestab
2) 9911843100 SM CRCA COIL 1 PT 6 x 73 PT 5 MM[99]()	Specification : AS PER OFBH SPECIFICATION	R	Nonestab
3) 9911843101 SM CRCA COIL 1 PT 6 MM THICK x 85 PT 5[99]()	Specification : AS PER OFBH SPECIFICATION	R	Nonestab
4) 9911843097 SM CRCA COIL 1 PT 6 MM x 134 PT 7[99]()	Specification : AS PER OFBH SPECIFICATION	R	Nonestab
5) 9911843265 SM CRCA COIL 0 PT 63 MM THICK[99]()	Specification : AS PER OFBH SPECIFICATION	R	Nonestab

Category :
Grade : Grade III
Size : S

1Ordnance Factory Bhusawal

Name	Specification	Use	Status
1) 9911842051 SM CRCA COIL 1 25 x 1250 MM D K[02]()	Specification : SM CRCA COIL 1.25 x 1250 MM D 'K'	R	Estab
2) 9911842208 SM CRCA COIL 0 63 x 1250 MM D K[07]()	Specification : SM CRCA COIL 0.63 x 1250 MM 'D'K	R	Estab
3) 9911846295 SM CRCA COIL 1 00 MM X 1080 MM[07]()	Specification : SM CRCA COIL 1.00 MM X 1080 MM	R	Estab
4) 9911846292 S M CRCA COIL 1 6 MM THICK 6[99]()	Specification : AS PER OFBH SPECIFICATION	C	Estab
5) 9911842205 SM CRCA COIL 1 6x1250MM D K[99]()	Specification : AS PER OFBH SPECIFICATION	C	Estab
6) 9911846294 S M CRCA COIL 0 63 MM THICK[98]()	Specification : AS PER OFBH SPECIFICATION	R	Estab
7) 9911844762 SM CRCA COIL 0 8MMx1000WIDTH[99]()	Specification : AS PER OFBH SPECIFICATION	C	Estab
8) 9911842206 SM CRCA COIL 1 00x1250MM D SK[99]()	Specification : AS PER OFBH SPECIFICATION	C	Estab

Category :
Grade : Grade III
Size : S

3257

Matharu Engineers
Plot No.F179, Phase 8B Industrial Focal Point Mohali S.A.S Nagar, Mohali Punjab
PIN1 : 160071
Phone No. : 9501315179

PTLS24598A

Download

1Engine Factory Avadi

[ENR Registration]

Name	Specification	Use	Status
1) Guide Spring Description : Guide Spring()	Specification : 92-1106-268	C	Estab
2) ASSY PISTON PIN WITH END CAP. Description : ASSY PISTON PIN WITH END CAP.()	Specification : 304-10-5 & 304-11-10	C	Estab

Category : dp
Grade : 1
Size : S

1Engine Factory Avadi

[ENR Registration]

Name	Specification	Use	Status
1) BUSH Description : BUSH()	Specification : 506-17-7	C	Estab
2) ASSY PISTON PIN WITH END CAP. Description : ASSY PISTON PIN WITH END CAP.()	Specification : 304-10-5 & 304-11-10	C	Estab

Category : dp
Grade : 1
Size : S

1Gun and Shell Factory

[ENR Registration]

Name	Specification	Use	Status
1) FINISH MACHINED STAGE OF 30 MM HE I BODY FROM INPUT STEEL ROD 32 MM TO OUTPUT DRAWING NO M 11209 FOR 30 MM HE I BMP II STORE Description : FINISH MACHINED STAGE OF 30 MM HE I BODY FROM INPUT STEEL ROD 32 MM TO OUTPUT DRAWING NO M 11209 FOR 30 MM HE I BMP II STORE()	Specification : AS PER DRAWING	C	Estab

Category : dp
Grade : 3
Size : S

3258

NORTH SOUTH COMMERCIAL CORPORATION
NEW NO.240(214) THAMBU CHETTY STREET CHENNAI TAMIL NADU
PIN1 : 600001
Phone No. : 044252231389

CHEN00079C

Download

1Engine Factory Avadi

[ENR Registration]

Name	Specification	Use	Status
1) fasteners Description : fasteners()	Specification : as per standard specification	E	Estab

Category : ddp
Grade : 1
Size : S

3259

Multitech Auto Pvt Ltd
A-5, Near Industrial Estate Adityapur, Jamshedpur Jharkhand
PIN1 : 832109
Phone No. : 9006552302

RCHM00381D

Download

1Vehicle Factory Jabalpur

[ENR Registration]

Name	Specification	Use	Status
1) LPTA SPRING SHACKLE PIN Description : LPTA SPRING SHACKLE PIN()	Specification : SPRING (SHACKLE) PIN DRG.NO.352.325.0530	C	Estab
2) LPTA SPRING PIN Description : LPTA SPRING PIN()	Specification : SPRING PIN DRG.NO.352.322.0530	C	Estab

Category : dp
Grade : 3
Size : M

3260

Caparo Engineering India Ltd.
C 21-22 & C 24 T26, Phase-IV Adityapur Industrial Area, Gamharia Jamshedpur Jharkhand
PIN1 : 832108
Phone No. : 07280044516
GSTIN : 24AABCC7862N1ZA

DELC12965B

Download

1Vehicle Factory Jabalpur

[ENR Registration]

Name	Specification	Use	Status
1) LPTA Rear Towing Hook 27 items Description : LPTA Rear Towing Hook 27 items()	Specification : REAR TOWING HOOK CONSISTING OF 22 ITEMS & 05 ITEMS AS PER LIST IPL OF FRAME ASSY. TO DRG. NO. REF DRG NO 0125900030 J	C	Estab
2) Assy.Tool Box Drg.No.261470000135(V2) & Assy.Support Tool Box Drg.No.261470000133(VI) Description : Assy.Tool Box Drg.No.261470000135(V2) & Assy.Support Tool Box Drg.No.261470000133(VI)()	Specification : Assy. Tool Box Drg. No. 261470000135(V2) & Assy.Support Tool Box Drg.No.261470000133(VI) for LPTA (L.F. No.-9113199344000)	C	Estab

Category : p
Grade : 2
Size : M