1) ASSEMBLY OF CSK FITTED BOLT M10 X 35MM CAT 1105 TO DRG NO IMPD0993 WASHER DIA 11 POINT 5 TO DRG NO IMPD0994 HEX NUT M 10 TO DRG NO IMPD0995 AND LOCK NUT M10 FOR SR NO 1 TO DRG IMPD 0996[00]()
Specification : ASSEMBLY OF CSK FITTED BOLT M10 X 35MM CAT-1105 TO DRG NO. IMPD0993, WASHER DIA 11.5 TO DRG. NO.IMPD0994, HEX NUT M-10 TO DRG. NO. IMPD0995 AND LOCK NUT M10 FOR SR. NO. 1 TO DRG. IMPD 0996.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) APPROACH ROLLER ASSEMBLY FOR AN 32 PLATFORM AS PER DRAWING NO BS 0120 6245000120[62]()
Specification : APPROACH ROLLER ASSEMBLY FOR AN-32 PLATFORM AS PER DRAWING NO. BS-0120
C
Nonestab
2) SHACKLE WITH PIN SHACKLE NO 15 OF DRG NO ADRDE 1410 FOR AN 32 PLATFORM 6245001410[62]()
Specification : SHACKLE WITH PIN (SHACKLE NO. 15) OF DRG NO ADRDE -1410 FOR AN-32 PLATFORM
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) PIN CAT 1255 PIN 41 774 X 90MM LONG TO DRG NO IMPD0988
Description : PIN CAT 1255 PIN 41 774 X 90MM LONG TO DRG NO IMPD0988()
Specification : PIN CAT-1255(PIN 41.774 X 90MM LONG) TO DRG. NO. IMPD0988.
C
Estab
2) STRAP CAT 1150 TO DRG NO IMPD 0981
Description : STRAP CAT 1150 TO DRG NO IMPD 0981()
Specification : STRAP(CAT-1150) TO DRG.NO.IMPD 0981
C
Estab
3) CONE HANDLE CAT PART NO 14 5340 001021 TO DRG NO ISK 0439
Description : CONE HANDLE CAT PART NO 14 5340 001021 TO DRG NO ISK 0439()
Specification : CONE HANDLE CAT.PART NO.14/5340-001021 TO DREG.NO.ISK-0439.
C
Estab
4) CUP SPRING 30 MM OD X 16 point 3 MM ID X 0 point 7 MM THICK ITEM 13 CAT PART NO 14 5420 001022 TO DRAWING NO CAT 1160 A DC ES 14 224 DT 3 10 84
Description : CUP SPRING 30 MM OD X 16 point 3 MM ID X 0 point 7 MM THICK ITEM 13 CAT PART NO 14 5420 001022 TO DRAWING NO CAT 1160 A DC ES 14 224 DT 3 10 84()
Specification : CUP SPRING 30 MM O/D X 16.3 MM I/D X 0.7 MM THICK ITEM 13 CAT PART NO. 14/5420-001022 TO DROWING NO.CAT-1160/A.DC.ES/14/224 DT.3.10.84 .
C
Estab
Category : ddp
Grade : 1
Size :
S
1Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) Handle with Handle Clip for Box C-53A[99]()
Specification : DRG, NO.OFB/C/1564
E
Nonestab
2) CARRYING LINK[99]()
Specification : DRG.NO OFB/C/1540
E
Nonestab
3) HANDLE AND HANDLE CLIP ASSEMBLY[99]()
Specification : DRG, NO.OFB/C/1564
E
Nonestab
4) HANDLE AS PER DRG. NO. OFB/C/1757[99]()
Specification : AS PER O.F.BSL DRAWING/SPECIFICATION
E
Nonestab
5) CATCH[99]()
Specification : CATCH AS PER DRG NO OFB/C/1561 & CQA PART NO. ISV-585A CORROSPONDING AHSP DRG NO.ISV-585A DC 35750 DATED 14/07/1994.
E
Nonestab
6) BRACKET A-1 FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
7) HINGE - AS PER DRG. NO. OFB/C/1565[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
8) Hinge[99]()
Specification : Drg.No. OFB/C/1410-A
E
Nonestab
9) PIECE PACKING FOR BOX SM 601[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
E
Nonestab
10) LID CORNER PIECE FOR BOX C-53A[99]()
Specification : AS PER DRG./SPECIFICATION
E
Nonestab
11) PIECE PACKING 'B'[99]()
Specification : AS PER DRG NO. OFB/C/1541
E
Nonestab
12) BRACKET B-1 FOR BOX C-53A[99]()
Specification : AS PER OFB DRG NO. OFB/C/1487 & ISV 2049
E
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT
Description : ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT()
Specification : ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT
R
Estab
2) ROLL PIN TO OFAJ DRG NO FS 516 A
Description : ROLL PIN TO OFAJ DRG NO FS 516 A()
Specification : ROLL PIN TO OFAJ DRG. NO.FS-516 A
R
Estab
Category : ddp
Grade : 1
Size :
S
1Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) WASHER N5 1 10
Description : WASHER N5 1 10()
Specification : WASHER TO DRG. NO . N5-1-10.5x 22 IN F/C
C
Estab
2) PIN COTTER SPLIT TO DRG NO N4 8 2X12 OR 10
Description : PIN COTTER SPLIT TO DRG NO N4 8 2X12 OR 10()
Specification : PIN COTTER SPLIT TO DRG NO N4-8-2X12 OR 10
C
Estab
3) CLIP SPRING 5340 015295
Description : CLIP SPRING 5340 015295()
Specification : CLIP SPRING TO D.S. CAT NO 5340-015295 IN FINISHED CONDITION
C
Estab
4) WASHER 003178
Description : WASHER 003178()
Specification : WASHER TO D.S CAT. NO. 5310-003178 IN FINISHED CONDITION
C
Estab
5) PLATE LEVER SEAR TO DRG NO M 8276A PB 12 IN F C
Description : PLATE LEVER SEAR TO DRG NO M 8276A PB 12 IN F C()
Specification : PLATE LEVER SEAR TO DRG. NO. M-8276A (PB-12) IN F/C
C
Estab
6) PIN SAFETY LEVER WITHOUT NICKEL PLATING TO DRG NO CTM 0030 A
Description : PIN SAFETY LEVER WITHOUT NICKEL PLATING TO DRG NO CTM 0030 A()
Specification : AS PER DRAWING
C
Estab
7) SPRING RETURN IN F/C TO GSF DRG NO M-8278A (PB-14)
Description : SPRING RETURN IN F/C TO GSF DRG NO M-8278A (PB-14)()
Specification : AS PER DRAWING
C
Estab
8) SCREW DRIVER TO DRG NO 5064158 IN FC
Description : SCREW DRIVER TO DRG NO 5064158 IN FC()
Specification : SCREW DRIVER TO DRG. NO. 5064158 IN F/C
78) WASHER SPRING IN FC TO DRG NO ARDE 1593 DET NO 8
Description : WASHER SPRING IN FC TO DRG NO ARDE 1593 DET NO 8()
Specification : WASHER SPRING IN F/C TO DRG.NO.ARDE-1593,DET.NO.8
C
Estab
79) PLUG REAR TO DRG NO ITV 52 IN FINISHED CONDITION
Description : PLUG REAR TO DRG NO ITV 52 IN FINISHED CONDITION()
Specification : PLUG REAR TO DRG NO ITV 52 IN FINISHED CONDITION
C
Estab
80) COAPLER RING GUARD SIZE ID 125MM X 4 MM THICK X 14 MM
Description : COAPLER RING GUARD SIZE ID 125MM X 4 MM THICK X 14 MM()
Specification : COAPLER RING (GUARD) SIZE: ID- 125MM X 4 MM THICK X 14 MM
C
Estab
81) COAPLER RING GUARD 125 MM HEAT BODY COPPER BAND
Description : COAPLER RING GUARD 125 MM HEAT BODY COPPER BAND()
Specification : COAPLER RING (GUARD) 125 MM HEAT BODY COPPER BAND
C
Estab
82) SPRING PIN SECURING COIL TO R F I SK NO 3342 IN FC
Description : SPRING PIN SECURING COIL TO R F I SK NO 3342 IN FC()
Specification : SPRING PIN SECURING COIL TO R.F.I SK. NO.3342 IN FC
C
Estab
83) SPRING PIN BOLT CATCH TO DS CAT NO 5315 008414
Description : SPRING PIN BOLT CATCH TO DS CAT NO 5315 008414()
Specification : SPRING PIN BOLT CATCH TO DS CAT NO 5315 008414
C
Estab
84) WASHER SPRING IN FINISHED CONDITION TO DRG NO ARDE 1593 DET NO 8
Description : WASHER SPRING IN FINISHED CONDITION TO DRG NO ARDE 1593 DET NO 8()
Specification : WASHER SPRING IN F/C TO DRG NO ARDE 1593, DET. NO. 8
C
Estab
85) MACHINING AND PROCESSING OF PLUG REAR ITV 52 FOR 81 M
Description : MACHINING AND PROCESSING OF PLUG REAR ITV 52 FOR 81 M()
Specification : MACHINING AND PROCESSING OF PLUG REAR ( ITV 52) FOR 81 M
C
Estab
Category : ddp
Grade : 3
Size :
S
1Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) TRIGGER SPRING 165140
Description : TRIGGER SPRING 165140()
Specification : TRIGGER SPRING TO DRG. NO. IRCL 564 (GF 165140L) IN F/C
C
Estab
2) SPRING TRIGGER SEAR TO DRG NO GF 125075
Description : SPRING TRIGGER SEAR TO DRG NO GF 125075()
Specification : SPRING TRIGGER SEAR TO DRG NO GF 125075 TO DC(I) NO. 19106-W, DT:-16.01.08 IN F/C
C
Estab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) SPLIT COTTER PIN DIA 4 X 20 COTTER SPLIT PIN MILD STEEL DIA 4 X 20 MM LONG TO DRG NO IMPD 0990
Description : SPLIT COTTER PIN DIA 4 X 20 COTTER SPLIT PIN MILD STEEL DIA 4 X 20 MM LONG TO DRG NO IMPD 0990()
Specification : SPLIT COTTER PIN DIA. 4 X 20 (COTTER SPLIT PIN MILD STEEL DIA.4 X 20 MM LONG) TO DRG. NO. IMPD 0990.
C
Estab
2) DUBO RETAINING RING FORM 303 CAT 1439 RING RETAINING NYLON 8 POINT 1 ID X 14 OD X 3 POINT 3 MM THICK TO DRG NO IMPD 0998
Description : DUBO RETAINING RING FORM 303 CAT 1439 RING RETAINING NYLON 8 POINT 1 ID X 14 OD X 3 POINT 3 MM THICK TO DRG NO IMPD 0998()
Specification : DUBO RETAINING RING FORM 303 CAT-1439 (RING RETAINING NYLON 8.1 ID X 14 OD X 3.3MM THICK) TO DRG. NO. IMPD 0998.
C
Estab
3) SPLIT COTTER PIN DIAMETER 5 OF SR NO 2 TO DRG NO IMPD 0986
Description : SPLIT COTTER PIN DIAMETER 5 OF SR NO 2 TO DRG NO IMPD 0986()
Specification : SPLIT COTTER PIN DIAMETER 5 OF SR. NO.2 TO DRG. NO.IMPD 0986.
C
Estab
Category : ddp
Grade : 1
Size :
S
1Machine Tool Proto Type Factory
[ENR Registration]
Name
Specification
Use
Status
1) 7118000086 PLUG REAR TO DRG NO ITV 52
Description : 7118000086 PLUG REAR TO DRG NO ITV 52()
Specification : PLUG REAR TO DRG.NO:ITV-52
C
Estab
Category : p
Grade : 3
Size :
S
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) SCREW FOR 120MM FSAPDS[01]()
Specification : SCREW FOR SHOT 120MM FSAPDS EMPTY AS PER DRAWING C SCW 120 1 602 REV 0
P
Nonestab
Category : p
Grade : Grade III
Size :
S
3062
BHANDARI INDUSTRIAL CORPORATION
32/34 C P TANK ROAD MUMBAI 400 004 32/34 C P TANK ROAD MUMBAI Maharashtra
PIN1 : 400004
Phone No. : 23858212 GSTIN :
27ACOPB3307R1Z9
1) STEEL ROUND 32 MM DIA FOR MANUFACTURING OF PT NO F0928415 B[90]()
Specification : STEEL ROUND 32 MM DIA SPECN 16 MN CR5
R
Nonestab
Category : s
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) HR SHEET 4 MM X 1250 X 2500[90]()
Specification : HR SHEET 4.00MM ×1250×2500 IS 1079 GR "O" (SK)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) TIN BRONZE INGOTS TO SPECIFICATION IS:306-1983[07]()
Specification : TIN BRONZE INGOTS TO SPECIFICATION
IS:306-1983
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) TIN BRONZE INGOTS NON MAGNETIC IS 306 1983[07]()
Specification : TIN BRONZE INGOTS-NON MAGNETIC,IS:306-1983(FE CONTENT RESTRICTED TO 0.03% MAX.).NOTE:NON-MAGNETIC PROPERTY WILL BE CHECKED BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) STEEL FLAT 10MM X 50MM STEEL GDE 3 OF IS 4072 1975[01]()
Specification : STEEL FLAT 10MM X 50MM ( 3/8" X 2") STEEL, GDE 3 OF IS:4072-1975
R
Nonestab
2) SPRING STEEL WIRE 18 SWG IS 4454[01]()
Specification : SPRING STEEL WIRE 18.SWG,IS-4454
R
Nonestab
3) SPRING STEEL STRIP IS 2507 1975 80C6 GDE 6[01]()
Specification : SPRING STEEL STRIP 0.5MM X 52MM IS-2507-1975/ 80C6 (GDE- 6)
R
Nonestab
4) CARBON MANGANESE STEEL ROD AS PER SPECN IS 4431 25 C 12 S 14[02]()
Specification : CARBON MANGANESE STEEL ROD 60.50 MM DIA AS PER SPECN. IS-4431 25 C 12 S-14
R
Nonestab
5) CHROMIUM NICKEL STEEL ROD AS PER SPECIFICATION BS 970 EN 24[03]()
Specification : CHROMIUM NICKEL STEEL ROD 1-5/8" DIA. AS PER SPECIFICATION BS-970/EN-24.
R
Nonestab
6) ALUMINIUM ALLOY FLAT 35 MM X 100MM 24534 W OF IS 734 1975[06]()
Specification : ALUMINIUM ALLOY FLAT 35 MM X 100MM 24534 W OF IS:734-1975
R
Nonestab
7) ALUMINIUM ALLOY TUBE 56MM X45MM BORE TO SPECIFICATION IS 738 1994 64430 T6[06]()
8) COPPER ROD TO SPECIFICATION IS 613 1984 HB[07]()
Specification : COPPER ROD 1/4" DIA TO SPECIFICATION IS-613-1984 ,HB
R
Nonestab
9) ALUMINUM BRONZE NON MAGNETIC ROD 16 MM DIA IS 10569 1983 CUAL10FE 3M[07]()
Specification : ALUMINUM BRONZE (NON-MAGNETIC) ROD 16.00MM DIA IS:10569-1983 CUAL10FE 3M
R
Nonestab
10) BRASS TUBE 45MM BORE TO SPECN IS 407 1981 CUZN 30 AS[07]()
Specification : BRASS TUBE 45MM(1-3/4")O/D X 32MM(1-1/4") BORE TO SPECN.IS-407/1981 CUZN 30 AS
R
Nonestab
11) PHOSPHORBRONZ EXTRUDED AND DRAWN 70 MM DIA ROD TO SPECN IS 7811 1985[07]()
Specification : PHOSPHORBRONZ EXTRUDED AND DRAWN. 70.MM (2-3/4") DIA ROD TO SPECN. IS.7811/1985
R
Nonestab
12) TIN BRONZE INGOTS NON MAGNETIC IS 306 1983[07]()
Specification : TIN BRONZE INGOTS - NON MAGNETIC, IS:306-1983(FE CONTENT RESTRICTED TO 0.03% MAX.) NOTE: NON-MAGNETIC PROPERTY WILL BE CHECKED BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.
R
Nonestab
13) N M GUN METAL ROD 38 MM DIA TIN BRONZE IS 306 1983[07]()
Specification : N.M GUN METAL ROD 38 MM DIA TIN BRONZE IS:306-1983 NOTE= IRON CONTS.SHOULD NOT BE MORE THAN 0.05%
R
Nonestab
14) P BRONZE ROD 35 MM DIA IS 7811 1985[07]()
Specification : P.BRONZE ROD 35 MM DIA. IS:7811-1985
R
Nonestab
15) ALUMINIUM ALLOY SHEET SPEC IS 737 SIC H SUPERSEDED BY IS 737 2008 19000 H X 8 SIZE 4 FEET X 8 FEET[06]()
Specification : ALUMINIUM ALLOY SHEET 1.25 MM THICK SPEC. IS-737/ SIC-H SUPERSEDED BY IS:737-2008, 19000, H X 8. SIZE:4 FEET X 8 FEET NOTE: SHEET SHOULD BE PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & WITH INTERLEAF PACKING TO AVOID SCRATCHES IN
R
Nonestab
16) MILD STEEL SHEET 3 MM THICK SIZE 8X4 AS PER SPECN IS 1079 GDE 42 1079[01]()
Specification : MILD STEEL SHEET 3.00 MM THICK SIZE 8X4 AS PER SPECN.IS-1079, GDE-42 -1079
R
Nonestab
17) ALUMINIUM ALLOY ROD 6 MM DIA TO SPCN IS 733 1983 HE 15WP[06]()
Specification : ALUMINIUM ALLOY ROD 6 MM DIA TO SPCN. IS-733/1983, HE-15WP
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) STEEL ROD 29MM BS-970-817 M40(EN24) (0205100029)[02]()
Specification : COLD DRAWN STEEL ROD 29MM+0.07/-0.13 DIA IN STREIGTH LENGTHOF 2 TO 2.5 MTRS TO SPECN.BS-970-817 M40 (EN24) ORIS-5517-1998 (REV.1) 40 Ni 6 Cr4 Mo3 .
R
Nonestab
2) STEEL ROD 18MM BS970 080M50 CD ANL (0133001165)[01]()
Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R
R
Nonestab
3) STEEL ROD 32MM 50 TY 14 1 2884 80 LF 0187100032[01]()
Specification : STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MAT
R
Nonestab
4) BRASS STRIP 127X0 4MM IS410 ZN30 O 0712590159[07]()
Specification : BRASS STRIP 127+/-0.5 MM WIDE X 0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN:IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1APRIL-1981, CU ZN 30 CONDITION O (ANNEALED)
Specification : BRASS STRIP 28 +/-0.2 MM WIDE X 0.5+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BS-2870-1980,DESIG.CZ102,1/2H.HARDNESS 100-115 VPN.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS BOWINESS (MAX) 2MM/MTR.COIL WT.35-40KG,ID WITH NYLON RING30
Specification : BRASS STRIP 14.5+/-0.5MM WIDE X 0.69 -0.02MM THICK TO SPECN.BS-2870 CZ-106 1/4 HARD. MATERIAL TO BE SUPPLIED IN COILS OF CONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 TO 15KGS WITH INSIDE DIA OF COIL 150MM(MAX.) HARDNESS HV 75 TO
R
Nonestab
7) BRASS ROD 23 MM BS 2872 CZ 128 LF 0711900023[07]()
Specification : BRASS ROD 23 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| BS|2872-89 GDE-CZ 128.
R
Nonestab
8) BRASS ROD 17MM SPECN IS 319 89 GR 2 LF 0712100017[07]()
Specification : BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.
Specification : BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
R
Nonestab
10) BRASS STRIP 132X0 4MM IS410 ZN30 O LF 0712590132[07]()
Specification : BRASS STRIP 132+/- 0.5 MM WIDE X 0.4 +/-0.025MM THICK TO SPECN.IS 410-1977 (REAFFIRMED 2006) (THIRD REVISION) WITHAMENDMENT NO.1 APRIL 1981 Cu Zn 30 CONDITION ANNEALED INCOIL. WEIGHT OF COIL NOT THAN 30 KG. I/D MINIMUM 100 MM.
R
Nonestab
11) BRASS STRIP 31 75X0 558MM LF 0710760997[07]()
Specification : BRASS STRIP 31.75+/-0.50MM WIDEX 0.558+/- 0.0254 MM THICK (1.25 X 0.022" (24 SWG) SPECN : IS-410.-1977 (THIRD REV.)(REAFFIRMED-2006) WITH AMENDMENT NO.1 APRIL-1981 CU ZN 30 CONDITION (a).
R
Nonestab
12) BRASS STRIP 25 4X0 63 MM LF 0717560949[07]()
Specification : BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 1
R
Nonestab
13) COPPER STRIP 15X0 26MM LF 0700661042[07]()
Specification : COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDN
R
Nonestab
14) STEEL ROD 32MM DIA GOST V 10230 75 LF 0184108032[01]()
Specification : STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE
R
Nonestab
15) STEEL ROD 32MM GOST TY14-1-2232-77 (0144101032)[01]()
Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED
R
Nonestab
16) STEEL ROD 29MM JSS-9510-01 SS/C-24A (0142000029)[01]()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A
Specification : BRASS STRIP 24+/-0.20 MM WIDE X 0.70+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN:JSS-9535-02-2008(REV.NO.3)HARDNESS 75-90HV.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS,BOWINESS (MAX) 2MM/MTR.COIL WT 35-40KG,ID WITH NYLON RING300MM MIN
Specification : BRASS STRIP 48 +/-0.40mm WIDE X 1.1 +/-0.02mm THICK IN COLD ROLLED CONDITION LENGTH 3 METRES IN COIL MIN SPECN : BS-2870 CZ-108, BRINELL HARDNESS : 80 - 120
R
Nonestab
19) STEEL ROD 3MM DIA BS:970-EN-7A (0133500003)[01]()
Specification : STEEL ROD 3.00(+0.10/-0.00) MM DIA TO SPECN:-BS-970-EN-7A COLD DRAWN WITH HARDNESS 140 HB (min) OR BS-970 080A20 CDWITH HARDNESS 140HB(min) WITH ANNEALED CONDITION IN STRAIGTH LENGTH OF ROD 2.0 TO 2.5 MTRS.((QAP ENCLOSED).
R
Nonestab
20) STEEL ROD 3.125MM IS:4431 14C14S14 (0112001004)[01]()
Specification : STEEL ROD 3.125+/-0.05MM DIA IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS TO SPECN.IS:4431-1978 REAFFIRMED 2004 GRADE 14C14S14 INCOLD DRAWN CONDITION.
R
Nonestab
21) STEEL ROD 3.67 MM BS-970 080 M50 S' (0114003306)[01]()
Specification : STEEL ROD 3.67(+0.10/-0.00) MM DIA IN THE LENGTH OF 2.00 MTRTO SPECN:BS-970-(PT-I)-1983 GRADE 080 M-50 IN 'S' CONDITION.(QAP ENCLOSED).
R
Nonestab
22) STEEL ROD 29MM IS-1570 GR.40C10S18 (0186000029)[01]()
Specification : STEEL ROD 29[+0.075/-0.13] MM DIA IN ST.LENGTH OF 2.5 TO 3.0MTR TO SPECN:IS-1570( PT-III)-1979 (FIRST REVISION)(REAFFIRMED 2004) GR.40C10S18.
R
Nonestab
23) STEEL ROD 7 MM IS-1875 GRD.20C8 (0101003008)[01]()
Specification : STEEL ROD 7(+0.025,-0.075)MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN.IS:1875-1992 (REAFFIRMED-2004)(FIFTH -REVISION)AMENDMENT NO.1 JAN.1993 AND AMENDMENT NO.2 NOV.1994GRADE 20C8.
R
Nonestab
24) WIRE GI 0.90MM/20SWG IS280 HARD (0133013091)[01]()
Specification : WIRE IRON GALVANISED (20 SWG) 0.90 MM TO SPECN.IS 280-1978 (REAFFIRMED-1997) (THIRD REV.)WITH AMENDMENT NO.1 JULY 1984& AMENDMENT NO.2 APRIL 2002 WITH UTS-550-825 MPa-MAX (HARDCONDITION)
R
Nonestab
25) STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145)[01]()
Specification : STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2004)1st REV)GRADE 14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2003)1s
R
Nonestab
26) STEEL ROD 18 MM JSS:9510-01 SS/D32 (0135300018)[01]()
Specification : STEEL ROD 18+0.05/-0.10MM DIA,TO SPECN.SS/D32 TO JSS-9510-01IN NORMALISED CONDITION OR BS-970-PT-1-1983 GRADE O8OM5O INNORMALISED CONDITION,IN ST.LENGTH OF3+/-0.1MTR,HARDNESS 187HB TO 207 HB.MATERIAL TO BE SUPPLIED WITH COLOUR CODE BASECO
Specification : SEAMLESS STEEL TUBE (PIPE)O/D 12+/-0.1MM X 10+/-0.1MM I/D STRAIGHT LENGTH OF 2.5 TO 3.00 MTRS TO SPECN:IS-3074-2005(SECOND REV.) AMDTS.NO.1 OF FEB.2006 AND NO.2 OF JUNE 2010GR-CDS-2 AS DRAWN & NORMALISED WITH Rm 35kg/Sqr.mm, Min Ag24% MIN
R
Nonestab
28) STEEL ROD 21MM IS4431 GR.14 C14 S14 (0111000021)[01]()
Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.
R
Nonestab
29) STEEL ROD 21MM IS-4431 14C14S14 CD (0133001021)[01]()
Specification : STEEL ROD 21(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2 TO 3MTR TOSPECN:IS-4431-1978(REAFFIRMED 2014)(1st REV.)GRADE-14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-GREEN,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)1st
R
Nonestab
30) STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)[01]()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK
R
Nonestab
31) MS ROD 64MM IS-1570 GR.25C4 (0133005064)[01]()
Specification : MS ROD 64MM IS-1570 GR.25C4
R
Nonestab
32) BRASS ROD 11 MM BS 2874 CZ122 H LF 0712200012[07]()
Specification : BRASS ROD 11 +/-0.10 MM DIA IN THE LENGTH OF 2 METER MIN TO SPECN.BS-2874 CZ-122 H
R
Nonestab
33) BRASS ROD 4MM BSEN12166 CUZN35PB2 LF 0717501004[07]()
Specification : BRASS ROD 4 +/-0.05 MM DIA IN ST. LENGTH OF 2 METERS MIN.TO SPECN.BS EN 12166:2011 DESIGN.CuZn35Pb2 MATERIAL CONDITIONR540 WITH UTS=54-65 Kgf/MM2 & ELONGATION=5% MIN
R
Nonestab
34) BRASS ROD 14 MM BS 2874 CZ124 LF 0711900014[07]()
Specification : BRASS ROD 14+/-0.05 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN.LEADED BRASS CZ-124 SEPCN.BS-2874 (1969).
R
Nonestab
35) BRASS ROD 4MM BSEN12166 CUZN39PB2 LF 0717501005[07]()
Specification : BRASS ROD 4MM BSEN12166 CUZN39PB2
R
Nonestab
36) BRASS ROD 8 5 MM IS 4170 CU ZN 40 LF 0711906010[07]()
Specification : BRASS ROD 8.5 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| IS|4170,CU ZN 40.
R
Nonestab
37) BRASS ROD 6 35MM IS 319 GRD 1 HB LF 0711904006[07]()
Specification : BRASS ROD 6.35 +0.025-0.075 MM DIA IN LENGTH OF 2 MTR (MIN) & 2.5 MTRS (MAX) TO SPECN. IS-319-2007 (FIFTH REVISION)GRADE-1 CONDITION - HB.
R
Nonestab
38) BRASS ROD 9 5MM OD IS 319 89 GR 2 LF 0712100010[07]()
Specification : BRASS ROD SIZE 9.5MM DIA TO SPECN.IS-319-2007 GR-2 (FIFTH - REVISION) HB.COND WITH PROP.TENSILE STRENGTH-380 Mpa MIN.ALONGATION-10% MIN ON 5.65 /5.65 SQ.YEILD STRENGTH - 170 MPaMIN . HARDNESS- 60 TO 80 R.C "B".
R
Nonestab
39) BRASS ROD 8MM BS2874 CZ122 M LF 0712100008[07]()
Specification : BRASS ROD 8MM BS2874 CZ122 'M'
R
Nonestab
40) BRASS ROD 17MM BS2874 CZ121 PB3 LF 0712100933[07]()
Specification : COPPER TUBE O/D 92.5MM +/- 0.25 MM x I/D 83.7+0.30 MM IN ST.LENGTH OF 300MM TO 400MM TO SPECN.JSS-4710-01-2007(REV.NO.4)GR.1 NOTE: WALL THICKNESS VARIATION SHOULD NOT BE MORE THAN0.3MM WITHIN SAME TUBE. MATERIAL TO BE SUPPLIED IN AS DRAWN
R
Nonestab
42) COPPER TUBE 35X2 5MM W T JSS 4710 1 lf 0707255389[07]()
Specification : COPPER TUBE 35+/-0.5 MM O/D X 2.5+/-0.25 MM WALL THICKNESS IN LENGTH OF 1.5 TO 3 METS. MIN. TO SPECN:-JSS-4710-01:2007(REVISION NO.4) GRADE 1 IN HARD DRAWN CONDITION.
R
Nonestab
43) BRASS ROD 37 5MM BS2874 CZ122M 0712200038[07]()
Specification : BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.
Specification : BRASS STRIP 75 +/_0.64 MM WIDE X 2.92 +/_0.06 MM THICK IN RANDOM LENGTH OF 1 METER AND ABOVE TO SPECN:JSS-9535-02-2008(REVISION NO.3) HARDNESS 115-130 VPN.
Specification : BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(REVISION NO.3) HARDNESS 135-155 HV IN THEFORM OF COIL OF 60MM INT.DIA.
Specification : BRASS STRIP 70+/-0.8 MM WIDE x 2.29+/-0.05 MMTHICK IN LENGTHOF 3 METERS IN COILS TO SPECN.JSS-9535-02-2008 REVISON NO.3IN ANNEALED COND.
Specification : BRASS STRIP 60.32 + 0.50 MM WIDE X 0.315 +/- 0.0254 MM THICK ANNEALED HARDNESS 78 VPN MARK TO SPECN:IS-410-1977,CuZn 30CONDITION (a)(REAFFIRMED 2006)(THIRD REVISION)WITH AMENDMENT NO.1 APRIL 1981.
R
Nonestab
54) COPPER STRIP 31 75X1 448MM IS 3167 LF 0717160907[07]()
Specification : COPPER ALLOY STRIP 31.75 +/ -0.50 MM WIDE X 1.448+/- 0.025MMTHICK IN LENGTH OF 3 METERS IN COILS TO SPECN.IS -3167-1982(FIRST REVISION) REAFFIRMED DEC-98.HARDNESS 55-75 HV.
Specification : BRASS STRIP SIZE 95 MM + 2.0 MM X3.9 MM -0.04 MM THICK TO SPECN-JSS 9535-02-2008 (REVISION NO.3) HARDNESS 65 TO 75VPN.GRAIN SIZE 0.035 TO 0.045 MM IN LENGTH OF 3 MTR MINIMUM.
Specification : BRASS STRIP 56+/-0.50 MM WIDE x 1.59 +/-0.05 MM THICK IN ST.LENGTH OF 3 MTRS. MIN. TO SPECN:-JSS-9535-02:2008 (REVISIONNO.3) TYPE 'A' ANNEALED CONDITION HARDNESS 65-75 VPN.
R
Nonestab
Category : s
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BRASS TUBE 13 85X10 95X185L IS 407 LF 0717255200[07]()
Specification :
R
Nonestab
Category : s
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) STEEL TUBE TO IS 36012006 OD 168 MM X 8 MM THICK X 980 MM LENG[01]()
Specification : as per spec
R
Nonestab
2) OFE COPPER ROD AS PER EN 13604 CW009A CONDITION D SIZE 50 MM DIA[00]()
Specification : OFE COPPER ROD AS PER EN 13604-CW009A CONDITION D SIZE 50 MM DIA
R
Nonestab
3) OFE COPPER ROD AS PER SPECIFICATION ASTM B 170 GRADE I SIZE 45 MM DIA[00]()
Specification : OFE COPPER ROD AS PER SPECIFICATION ASTM B 170 GRADE I SIZE 45 MM DIA
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) STEEL BAR CARBON[01]()
Specification : STEEL BAR CARBON COLD FIN 1137 (LEADED) SPECN ASTM A 108 OR ST. BAR HOT ROLLED ALLOY GR. 4037 ASTM A322 WITH MIN. ROCKWELL HARD. RHC 35 -45 OR BS970 (LATEST ISSUE) PT1 1983 GR. 605 M36 IN V COND WITH RH 35-45 OR IS 4431 (LATEST ISSUE) DES
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) STEEL ROD 18MM BS970 080M50 CD ANL (0133001165)[01]()
Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R
R
Nonestab
2) BRASS ROD 11MM BS2874 CZ122 M LF 0712203011[07]()
Specification : BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.
R
Nonestab
3) ALU ALLOY ROD 6MM IS 733 GRD 24345 LF 0611515550[06]()
Specification : ALUMINIUM ALLOY ROD 6+/-0.05MM DIA IN LENGTH OF 2.5 TO 3 MTRTO SPECN:BS-1474-1987 GRADE 2014-A OR IS-733-1983 GRD.243453rd.REV)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES-ELASTIC LIMIT 275 MPa Mi
Specification : ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
Specification : SEAMLESS STEEL TUBE (PIPE)O/D 12+/-0.1MM X 10+/-0.1MM I/D STRAIGHT LENGTH OF 2.5 TO 3.00 MTRS TO SPECN:IS-3074-2005(SECOND REV.) AMDTS.NO.1 OF FEB.2006 AND NO.2 OF JUNE 2010GR-CDS-2 AS DRAWN & NORMALISED WITH Rm 35kg/Sqr.mm, Min Ag24% MIN
R
Nonestab
6) STEEL ROD 21MM IS-4431 14C14S14 CD (0133001021)[01]()
Specification : STEEL ROD 21(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2 TO 3MTR TOSPECN:IS-4431-1978(REAFFIRMED 2014)(1st REV.)GRADE-14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-GREEN,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)1st
R
Nonestab
7) MS ROD 64MM IS-1570 GR.25C4 (0133005064)[01]()
Specification : MS ROD 64MM IS-1570 GR.25C4
R
Nonestab
8) BRASS ROD 8 5 MM IS 4170 CU ZN 40 LF 0711906010[07]()
Specification : BRASS ROD 8.5 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| IS|4170,CU ZN 40.
R
Nonestab
9) BRASS ROD 29 MM BS2874 CZ122 M LF 0712200029[07]()
Specification : BRASS ROD 29 +/- 0.10 MM DIA IN LENGTH OF 1.5 TO 3 MTRS. TO SPECN: BS-2874-CZ-122 "M" CONDITION.
R
Nonestab
10) ALU ALLOY ROD 8 MM IS 733 24345 W LF 0611503008[06]()
Specification : ALUMINIUM ALLOY ROD 8.0 MM(+0.025/-0.075MM) DIA IN STRAIGHT LENGTH OF 2.5 TO 3.0 METRE TO SPECN: IS-733-1983 (THIRDREVISION)(REAFFIRMED 2006)GRADE 24345 'W' CONDITION.
R
Nonestab
11) ALU ALLOY ROD 39 MM IS 733 24345 W LF 0611505039[06]()
Specification : ALUMINIUM ALLOY ROD 39+0.30/-0.20MM DIA IN ST.LENGTH OF 2 TO2.5 MTR.TO SPECN.IS-733-1983 (THIRD REV.)(REAFFIRMED 2006)GRADE 24345 CONDITION "W".
Specification : COPPER TUBE 35.2044 MM +/-0.1016 MM OUTER DIA X 3.2512 MM +/-0.1524 MM WALL THICKNESS IN LENGTH OF 3.0480 TO 3.6576METER TO SPECIFICATION JSS-4710-01-2007 (REV.NO.4) GRADE-1.
R
Nonestab
13) ALU ALLOY ROD 17 MM IS 733 GR 24345 LF 0611505017[06]()
Specification : ALUMINIUM ALLOY ROD 17 +0.30/-0.00 MM DIA IN STRAIGTH LENGTHOF 2.5 TO 3.0 METER TO SPECN.BS:1474-1987 GRADE 2014A OR IS:733-1983(THIRD REVISION)(REAFFIRMED2006)GRADE 24345.MATL.TOBE HEAT TREATED TO ACHIEVE THE FOLLING PROPERTIES;ELASTICLI
R
Nonestab
14) ALU ALLOY ROD 60MM IS733 GR24345 W LF 0611505060[06]()
Specification : ALUMINIUM ALLOY ROD 60.0 +/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN.IS-733-1983(REAFFIRMED 2006)(THIRD REV.)GRADE-24345,CONDITION 'W'.
Specification : COPPER TUBE O/D 92.5MM +/- 0.25 MM x I/D 83.7+0.30 MM IN ST.LENGTH OF 300MM TO 400MM TO SPECN.JSS-4710-01-2007(REV.NO.4)GR.1 NOTE: WALL THICKNESS VARIATION SHOULD NOT BE MORE THAN0.3MM WITHIN SAME TUBE. MATERIAL TO BE SUPPLIED IN AS DRAWN
R
Nonestab
16) ALU ALLOY ROD 60MM BS1474 2014A T 6 LF 0611509060[06]()
Specification : ALUMINIUM ALLOY ROD 60+/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN: BS 1474-1987-2014-A IN T-6 CONDITION.
R
Nonestab
17) ALU STRIP 12 14X0 30MM BS1470 2014A LF 0611563904[06]()
Specification : ALUMINIUM ALLOY STRIP 12/14+/-0.50MM WIDE X0.30+/-0.02 MM THICK TO SPECN.BS:1470 -1987,DESIGN.2014A,TEMPER 'T4'
R
Nonestab
18) ALU FOIL 510X.10MM IS737 19000 [06]()
Specification : ALUMINIUM FOIL 510+/-0.50 MM WIDE x 0.10+/-0.01 MM THICK IN COIL OF 10 MTRS LENGTH TO SPECN:-IS-737-2008 (REVISION NO.4)R3 GR 19000 "0"
R
Nonestab
19) BRASS ROD 14MM BS2874 CZ122 M LF 0717703904[07]()
Specification : BRASS ROD 14+/- 0.10 MM DIA IN ST LENGTH OF 1.5 TO 2 METRES MIN SPECN.BS 2874-1986 CZ-122 "M"
R
Nonestab
20) MS PLATE 1MX1MX20MM SPECN.IS:226 (0133021021)[01]()
Specification : MILD STEEL PLATE SIZE 1M X 1M X 20MM THICK TO SPECN.IS:226
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0133030121 BOLT M16 X 2P X 50 MM (SOCKET HEAD)[01]()
Specification : BOLT M16 X 2P X 50 MM (SOCKET HEAD)
C
Nonestab
2) 0145061109 STRIP ST.COLD ROL 0.5MM THX190 MM W[01]()
Specification : SPECN: SEAL TIN (FOR STEEL TAPE BANDING SIZE 12.7 MM WIDE). APPRX. SIZE 25.41 MM LENGTH X 12.7 MM WIDTH X 0.3 MM THICK AND BEND OF 90 DEGREE ANGLE BOTH SIDE LONGITUDINALLY WITH HEIGHT 6.3 MM.
R
Nonestab
6) 0145060115 STRIP STEEL[01]()
Specification : IS-1079-1994
R
Nonestab
7) 0133030114 MS PLATE SIZE 6MM[01]()
Specification : IS 2062-1994
R
Nonestab
8) 0133030109 MS PLATE SIZE 25MM[01]()
Specification : IS 2062-1994
R
Nonestab
Category : s
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) 65 MM DIA STEEL ROD TO SPECIFICATION GOST 4543[00]()
Specification : 65 MM DIA STEEL ROD TO SPECIFICATION GOST 4543-71, GRADE 30KHGSA /GRADE 40 KH (OR) IS 5517-93, GRADE 31NI10CR3MO6 IN STRAIGHT LENGTH OF 1.5 MTRS TO 2.5 MTRS. HARDNESS OF THE MATERIAL SHALL BE 31-37 HRC
R
Estab
2) 70 MM DIA STEEL ROD TO SPECIFICATION GOST 1050[00]()
Specification : 70 MM DIA STEEL ROD TO SPECIFICATION GOST 1050-88, GRADE 10 / GRADE 35 / GRADE 45 (OR) IS 1570 (PT 2) - 1979, GR 10C4 IN STRAIGHT LENGTH OF 1.5 MTRS TO 2.5 MTRS
R
Estab
3) 90 MM DIA STEEL ROD TO SPECIFICATION GOST 4543[00]()
Specification : 90 MM DIA STEEL ROD TO SPECIFICATION GOST 4543-71, GRADE 30KH GSA (OR) IS 5517-93, GRADE 31NI10CR3MO6 IN STRAIGHT LENGTH OF 1.0 MTR TO 2.5 MTRS. HARDNESS OF THE MATERIAL SHALL BE 34-40.5 HRC
R
Estab
4) GROUND STEEL ROD DIA 10 0 POINT 05MM TO SPECIFICATION GOST 7417 75 10 GOST 1051 73 OR IS1570 GRADE 10C4 IN STRAOGHT LENGTH OF 1 5MTR TO MTRS[00]()
Specification : GROUND STEEL ROD DIA 10 =/-0.05MM TO SPECIFICATION GOST 7417-75/ 10 GOST 1051-73 OR IS1570, GRADE 10C4 IN STRAOGHT LENGTH OF 1.5MTR TO MTRS.
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS ROD 8 5 MM LF 0711906011
Description : BRASS ROD 8 5 MM LF 0711906011()
Specification : TO SPECN:IS-319-2007 REVISION NO.5 (REAFFIRMED -2017) GRADE 1 IN HALF HARD CONDITION
R
Nonestab
Category : s
Grade : 3
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) P.B ROUND 100 MM[70]()
Specification : AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 0720300095 PB ROUND 95MM DIA STD LENGTH TOM SPECIFICATION IS 7811 1985[70]()
Specification : 0720300095 P.B.ROUND 95MM DIA STD.LENGTH TOM SPECN: IS: 7811-1985.
Specification : STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS) IN ANNEALED & SKIN PASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN (HR/HS) CON
Specification : STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS) IN ANNEALED & SKIN PASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN (HR/HS) CON
Specification : STEEL STRIP SIZE 40 +/-0.5 MM WIDE X 0.35 +/-0.03 MM THICK TO SPECN:IS-513-2008 (FIFTH REVISION) GR.CR-3 OR GD I CS OFBS-1449-SECTION 1.1:1991 QUALITY IN ANNEALED AND SKIN PASSED CONDITION IN COIL OF 50 KG WEIGHT EACH.
R
Estab
Category : s
Grade : 3
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) ST. ROUND 38MM DIA 380MM LONG[03]()
Specification : STEEL ROUND 38 MM DIA IS 5517-1978.40 CSR BS -970-709-M-40
R
Nonestab
2) STEEL ROD 32MM (-0.5) DIA[03]()
Specification : STEEL ROD 32MM(-0.5) DIA.
R
Nonestab
3) STEEL RD. 42MM DIA FOR P/EXTN[03]()
Specification : STEEL RD. 42MM DIA. FOR P/EXTN
R
Nonestab
4) STEEL ROD 38MM.(+0.5MM - 0MM)DIA LENGTH SIZE 470[01]()
Specification : STEEL ROD 38MM.(+0.5MM - 0MM)DIA. TO SPECN.JSS:9510-06,2000 (REV-3)CODE REF.'B'. OR BS:970 PT-I:1983,GD.708 M40(EN-19A)V.D.,IN HR.,PEELED & ANNEALED COND.(248-HV.MAX.). MAINTAINED TO LENGTH SIZE 470(-1.0)MM.EACH FOR BARREL(CLD.FORGED)TO D
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) STEEL ROD 32mm (+0.5MM-0MM) DIA, TO SPECN BS:970 PT-I:1983, GD-708 M-40[03]()
Specification : STEEL ROD 32mm (+0.5MM-0MM) DIA, TO SPECN BS:970 PT-I:1983, GD-708 M-40"T"(EN-19A) V.D. IN HR PEELED & ANNEALED COND (240 HV MAX) MAINTAINED S&P COMBINED= .022%MAX.(%S-01MAX & %P-015 MAX.) TO LENGTH SIZE-490 MM (-1.0MM) FOR BARREL
R
Nonestab
2) STEEL ROD 32mm DIA (+0.1-0.00) PEELED BAR IN EXACT LENGTH OF 800MM (+5MM-0.00MM) EACH PIECE, TO SPECN. BS-970, PT-I:1983, GD-835, M-15 (EN-39B)[03]()
Specification : STEEL ROD 32mm DIA (+0.1-0.00) PEELED BAR IN EXACT LENGTH OF 800MM (+5MM-0.00MM) EACH PIECE, TO SPECN. BS-970, PT-I:1983, GD-835, M-15 (EN-39B)
R
Nonestab
3) STEEL ROUND 38 MM DIA 380 MM LONG BS 970, PT-1,1983,708M 40/ EN-19 FOR BARREL OF 7.62 MM RIFLE GHATAK.[03]()
Specification : STEEL ROUND 38 MM DIA 380 MM LONG BS 970, PT-1,1983,708M 40/ EN-19 FOR BARREL OF 7.62 MM RIFLE GHATAK.
R
Nonestab
4) STEEL ROD 38mm (+0.5MM-0MM) DIA TO SPECN.JSS:9510-06,2000 (REV-3) CODE REF. [03]()
Specification : STEEL ROD 38mm (+0.5MM-0MM) DIA TO SPECN.JSS:9510-06,2000 (REV-3) CODE REF. "B"BS:970 PT-I:1983, GD. 708 M40(EN-19A) V.D,
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Brass rod 8 5mm bs 2874 cz129 m LF 0741100004
Description : Brass rod 8 5mm bs 2874 cz129 m LF 0741100004()
Specification : Brass rod 8 5mm(-0.050)mm Dia in straight length of 3.0meter(-0.2m max) to specn:BS-2874-CZ-129 cond. 'M' circular ovality 0.020mm max; straightness 01mm in 01 meter & rod should be packed in a suitable box to prevent bending during trans
Specification : BRASS TUBING 7.11 +/-0.1 MM I/D X 7.93+/-0.076 MM O/D IN RANDUM LENGTH OF 1 MTR. MIN. EXTRUTED AND DRAWN CONDITIONSPECN: BS:2871 PT-2 OF 1972 CZ-126.
R
Nonestab
2) ALU ALLOY ROD 6 50MM IS 733 24345WP LF 0611501006
Description : ALU ALLOY ROD 6 50MM IS 733 24345WP LF 0611501006()
Specification : ALUMINIUM ALLOY ROD 6.50+/-0.05MM DIA IN ST.LENGTH OF 2.5 TO3 MTRS TO SPECN.IS:733-1983 (THIRD REVISION) REAFFIRMED 2006DESG.24345 IN WP CONDITION WITH MECH.PROPERTIES Rm-40Kgf/mm2(MIN), Rp 0.2-28 Kgf/mm2(MIN) A5-10 MIN.
R
Nonestab
3) ALU ALLOY ROD 3 5MM IS 739 GR 64430 LF 0611503004
Description : ALU ALLOY ROD 3 5MM IS 739 GR 64430 LF 0611503004()
Specification : ALUMINUM ALLOY ROD 3.5 MM (+0.1MM/0.0MM) DIA IN STRAIGHT LENGTH OF 1.8 TO 2.0 METRE TO SPECN. IS-739-1992 ( THIRD -REVISION ) DESIGNATION 64430 CONDITION "WP" OR IS-739-1992( THIRD REVISION ) DESIGNATION 24345 CONDITION "W".
R
Nonestab
4) ALU ALLOY ROD 8 MM IS 733 24345 W LF 0611503008
Description : ALU ALLOY ROD 8 MM IS 733 24345 W LF 0611503008()
Specification : ALUMINIUM ALLOY ROD 8.0 MM(+0.025/-0.075MM) DIA IN STRAIGHT LENGTH OF 2.5 TO 3.0 METRE TO SPECN: IS-733-1983 (THIRDREVISION)(REAFFIRMED 2006)GRADE 24345 'W' CONDITION.
Specification : BRASS TUBE 14.20 +0.1 O/DX10.80 MM ID X240 MM LONG.DRAWN BRASS TUBING,TYPE CZ 108 TO SPECN|BS|2871(1972)PART.II-INCLUDING AMDT.1(1976).CONDITION M.
R
Nonestab
6) ALU ALLOY ROD 14 MM IS 733 24345 WP LF 0619500015
Description : ALU ALLOY ROD 14 MM IS 733 24345 WP LF 0619500015()
Specification : ALUMINIUM ALLOY ROD 14.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGHTLENGTH OF 2.5 TO 3 METRE TO SPECN.IS:733-1983(THIRD REVISIONREAFFIRMED 2006 DESG.24345 IN WP CONDITION.
R
Nonestab
7) ALU ALLOY ROD 26 5MM SPECN 2024 TN LF0611505026
Description : ALU ALLOY ROD 26 5MM SPECN 2024 TN LF0611505026()
Specification : ALUMINIUM ALLOY ROD 26.5(+/-0.10)MM IN LENGTH OF 2.5 TO 3MTRTO SPECN:2024 TN WITH CHEMICAL COMPOSITION:Cu 3.8/4.9,Fe(MAX0.5,Si(MAX)0.5,Mg 1.2/1.8,Mn 0.3/0.9 IMPURITY 0.3 ALL UP TO100% AND ULTIMATE TENSILE STRESS 45.5/50 Kg/mmsq,ELONGATION
R
Nonestab
8) ALU ALLOY ROD 7 MM BS1474 2014A LF 0611500010
Description : ALU ALLOY ROD 7 MM BS1474 2014A LF 0611500010()
Specification : ALLU.ALLOY ROD 7 +0.03/-0.07 MM DIA IN LENGTH OF 2 TO 3 MTR TO SPECN:BS-1474-1987 GRADE 2014-A OR IS:733-1983 GRD.243453rd.Rev)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES.ELASTIC LIMIT-275 MPa Mi
Specification : COPPER TUBE O/D 46.8 (+/-)0.20MM X I/D 40.3 (+/-)0.10MM IN STRAIGHT LENGTH OF 1.5 Mtr. TO 3 Mtr. TO SPECN- JSS-4710-01-2007 (REV NO.4)GRADE-I
R
Nonestab
10) ALU ALLOY ROD 17 MM IS 733 24345 WP LF 0611505117
Description : ALU ALLOY ROD 17 MM IS 733 24345 WP LF 0611505117()
Specification : ALUMINIUM ALLOY ROD 17.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGTHLENGTH OF 2.5 TO 3.0 METRE TO SPECN.IS:733-1983 (REAFFIRMED-2006) (THIRD REV.) GRADE 24345 IN "WP" CONDITION.NOTE:NO HIGH GRAIN SIZE AREA PERMITTED BELOW DIAMATER 13.96MM.
R
Nonestab
11) ALU ALLOY ROD 31 75MM IS733 64430 W LF 0611503032
Description : ALU ALLOY ROD 31 75MM IS733 64430 W LF 0611503032()
Specification : ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 "W" CONDITION.
R
Nonestab
12) ALU ALLOY ROD 65MM IS733 GR24345 WP LF 0611503065
Description : ALU ALLOY ROD 65MM IS733 GR24345 WP LF 0611503065()
Specification : ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION "WP".
R
Nonestab
13) ALU ALLOY ROD 18 50MM IS 733 24345 LF 0611505019
Description : ALU ALLOY ROD 18 50MM IS 733 24345 LF 0611505019()
Specification : ALUMINIUM ALLOY ROD 18.5 (+0.15/-0.05)MM DIA IN ST.LENGTH OF2.5TO 3 MTR TO SPECN:IS-733-1983(THIRD REV.)(REAFFIRMED 2006GRADE 24345 IN"WP"COND.OR BS-1474-1987GRADE 2014A IN"T6"CONDMAT.TO BE SUITABLY HEAT TREATED TO ACHIEVE THE ELASTIC LIM
R
Nonestab
14) ALU ALLOY ROD 26 50MM IS733 24345WP LF 0611505027
Description : ALU ALLOY ROD 26 50MM IS733 24345WP LF 0611505027()
Specification : ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS
R
Nonestab
15) ALU STRIP 25X0 5MM IS 737 19000 O LF 0615360001
Description : ALU STRIP 25X0 5MM IS 737 19000 O LF 0615360001()
Specification : ALUMINIUM STRIP 25+/-0.5 MM WIDE X 0.50(+0.025/ -0.030) MM THICK IN COILS OF 6 METERS LONG TO SPECN:IS-737-1986(REAFFIRMED 1996)(THIRD REVISION) DESIG.19000 CONDITION 'O'
R
Nonestab
16) ALU STRIP 30X0 25MM IS737 19000 O LF 0615460910
Description : ALU STRIP 30X0 25MM IS737 19000 O LF 0615460910()
Specification : ALUMINIUM STRIP 30+/-0.50MM WIDE X 0.25+/-0.025 MM THICK IN ROLLS OF 10 METERS LONG TO SPEEN-IS-737-1986 (Reaffirmed1996)(Third Revision) DESIGN-19000 CONDITION "O".
Specification : ALUMINIUM ALLOY STRIP 15+/-0.2MM WIDE X 0.60 [+0.00/-0.05]MM THICK IN COILS OF RANDOM LENGTH TO SPEEN:-BS-1470:1987 DESIGNATION 2014A (TB) T4 .
Specification : PURE ALUMINIUM STRIP 62+/-0.50 MM WIDE x 0.31+/-0.025 MM THICK TO SPECN:-IS-737:1986(REAFFIRMED 1996)) (3rd REVISION) DESIGNATION -19000 CONDITION "H1" IN COIL. WEIGHT OF EACHCOIL SHOULD BE 15 TO 20 KG BUT NOT EXCEED 30 KGS.
R
Nonestab
19) ALU STRIP 16X0 35MM IS737 19000 O LF 0615461878
Description : ALU STRIP 16X0 35MM IS737 19000 O LF 0615461878()
Specification : PURE ALUMINIUM STRIP 16+/-0.50 MM WIDE X 0.35+0.035-0.025 MMTHICK IN ROLLS OF 6 METER LENGTH TO SPECN.IS-737-2008(FOURTH REVISION ) DESIGNATION 19000 CONDITION 'O'.
R
Nonestab
20) ALU STRIP 55X0 3MM IS 737 19500 LF 0615361047
Description : ALU STRIP 55X0 3MM IS 737 19500 LF 0615361047()
Specification : ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.
R
Nonestab
21) ALU STRIP 12X0 7MM IS 737 19000 H4 LF 0615461197
Description : ALU STRIP 12X0 7MM IS 737 19000 H4 LF 0615461197()
Specification : ALUMINIUM STRIP 12+0.50MM WIDE X 0.70+0.025MM THICK TO SPECN:IS-737 GRADE 19000 COND.H4 OR BS-1470 GRADE 1200COND.H8.
R
Nonestab
22) ALU STRIP 85X0 3MM IS737 19500 O LF 0615361048
Description : ALU STRIP 85X0 3MM IS737 19500 O LF 0615361048()
Specification : ALUMINIUM STRIP 85.0 +/-0.5 MM WIDE X 0.3-0.08 MM THICK IN COILS OF 8 METRES. TO SPECN:IS-737-2008(REV.NO.4) GR.19500CONDTION "O OR BS-1470:1987 GR-1050-A CONDITION "O".MATERIALSHOULD BE SUPPLIED WITH UTS OF 60 MPa MIN
R
Nonestab
23) ALU ALLOY ROD 10 MM IS733 24345 ITEM CODE 0611403010
Description : ALU ALLOY ROD 10 MM IS733 24345 ITEM CODE 0611403010()
Specification : ALUMINIUM ALLOY ROD 10.0 MM(+0.10MM/-0.00MM) DIA IN STRAIGHTLENGTH OF 1.8 TO 2 METRE TO SPEC IS-733-1983 (THIRD REVISION(REFFIRMED 2017) GRADE 24345 IN "WP" CONDITION.
Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED
Specification : ALUMINIUM STRIP 25.5+/-0.5 MM WIDE X 0.2 MM THICK TO SPECN:-BS-1470-1987 GR.1200 H16 OR IS-737-1987 (REAFFIRMED-1996)(THIRED REVISION) DESIG 19000 CONDITION H3.
R
Nonestab
Category : s
Grade : 3
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL PIPE O D 100 00MM 0 50 MM X I D 78 00MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T[70]()
Specification : STEEL PIPE O D 100 00MM 0 50 MM X I D 78 00MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T
R
Nonestab
2) 0720200095 PB ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS 7811 1985[70]()
Specification : 0720200095 PB ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS: 7811-1985
Specification : 0321150115 STAINLESS STEEL TUBE TO SIZE OUTER DIA 115.00 (+) (-) 1.00 MM X INNER DIA 90.00 (+) (-) 1.00 MM X 510.00 (+)2.00 MM LONG TO SPECN: AISI-316.OR, AISI-304
Specification : 0321150125 STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) RIB 3 MM TH ST 42 IS 1079
Description : RIB 3 MM TH ST 42 IS 1079()
Specification : RIB 3 MM TH. ST. 42 IS:1079 Part No. 645-01-7319-1
C
Estab
2) M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL
Description : M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL()
Specification : M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL
R
Estab
3) M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL
Description : M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL()
Specification : M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL
R
Estab
4) M S BLOCK 65X173X185
Description : M S BLOCK 65X173X185()
Specification : M. S. BLOCK SIZE- 65X173X185 FOR BRACKET LHS & RHS TO PART NO. 610-03-1202L-1/C & 610-03-1202L-1/A
C
Estab
5) MS PLATE 25 MM THICK
Description : MS PLATE 25 MM THICK()
Specification : MS PLATE 25 MM THICK × STD. SIZE SPECN: IS:1079, GR ST-42
R
Estab
6) MS Angle 50x50x5 MM THICK
Description : MS Angle 50x50x5 MM THICK()
Specification : M.S. Angle (50x50x5) MM IN LENGTH OF 5 METR OR UNITS MULTIPLE LENGTH SPECN-IS:2062 GR"A"
R
Estab
7) M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL
Description : M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL()
Specification : M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL
R
Estab
8) MS ANGLE IRON 50x50x6MM
Description : MS ANGLE IRON 50x50x6MM()
Specification : MS ANGLE IRON 50×50×6MM THICK IN LENGTH 5100 MM AS PER IS:2062
R
Estab
9) MS PLATE 12 MM IS 2062
Description : MS PLATE 12 MM IS 2062()
Specification : MS PLATE 12 MM THICK × 1000 × 2000 MM OR STD. SIZE SPECN. IS:2062 GR "B"
R
Estab
10) MS PLATE 16 MM IS 2062 GR B
Description : MS PLATE 16 MM IS 2062 GR B()
Specification : MS PLATE 16 MM IS-2062 GR "B" SIZE: 16MM THICK × 1250 × 2500/2800 MM LONG
1) SHEET METAL COMPONENTS FOR SMALL ARMS
Description : SHEET METAL COMPONENTS FOR SMALL ARMS()
Specification : AS PER DRAWING
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) STEEL SCRAP [04]()
Specification : STEEL SCRAP "B." IN THE FORM OF END PICES OF BILLETS [REJECTED FORGINGS & SHELL (STEEL SCRAP LM IN FORM OF ] [REJECTED SHELLS / FORGING / END PCS OF STEEL BILLETS /] [CUTTING RING OF SHELLS etc.
R
Nonestab
2) FERRO MANAGENESE MEDIUM CARBON (0454373000)[04]()
Specification : FERRO MANGANESE MEDIUM CARBON TO SPECN. IS : 1171-2011 GARDE] [MEDIUM CARBON DESIGNATION 2FeMn 76 SIZE OF LUMP 50 TO 150MM ]| [DULY PACKED IN STEEL DRUM AND DRUM MUST BE CLEARLY MARRKED ] [THE GRADE OF MATERIAL WITH SUPPLIER 'S NAME. ]
R
Nonestab
3) FERRO VANADIUM LOW CARBON (0465073000)[04]()
Specification : FERRO VANADIUM LOW CARBON AS PER IS-1466-1985 GR.FeV 55.THE [EVALUATION OF COST WITH 50% VANADIUM CONTENT AS BASE PLUS PRORATA BASIS.HOWEVER SIZE OF LUMPS:10MM TO 50MM WITH FINES]| [NOT EXCEEDING 10% MAX. ]
R
Estab
4) FERRO CHROME LOW CARBON (0453073000)[04]()
Specification : FERRO CHROMIUM LOW CARBON AS PER IS 1170-1992 GRADE 09 - | [DESIGN. 008 FE CR-64 WITH FOLLOWING CONDITIONS ] [SIZE FROM -10 TO 100 MM PACKING MATERIAL SHOULD BE SUPPLIED ] [IN STEEL DRUM OF 100 KG CAPACITY. EVALUATION ON 60% CR MIN ] [P
R
Nonestab
5) ALUMINIUM PURE INGOT (0615186000)[06]()
Specification : ALUMINIUM PURE INGOT 99% PURE TO SPECIFICATION IS-617-1994 [DESIGNATION 1900 WEIGHT OF INGOT -ONE KG APPROXIMATE
[ OR ]
[PRIMARY ALUMINIUM INGOTS WITH MINIMU
1) STEEL ROD 18MM BS970 080M50 CD ANL Lf 0133001165
Description : STEEL ROD 18MM BS970 080M50 CD ANL Lf 0133001165()
Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R
R
Nonestab
Category : s
Grade : 3
Size :
S
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) BRIGHT BAR 55 DIA X 35 LENGTH IS 2073
Description : BRIGHT BAR 55 DIA X 35 LENGTH IS 2073()
Specification : BRIGHT BAR SIZE 55 DIA X 35 LENGTH IS:2073 (DRG. NO. 645-01-7321-1/C FOR FINISH COMPONENT)
C
Estab
2) Bright Bar 45 dia X 85 length IS 2073
Description : Bright Bar 45 dia X 85 length IS 2073()
Specification : Bright Bar 45 dia X 85 length IS 2073
C
Estab
3) M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL
Description : M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL()
Specification : M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL
C
Estab
4) M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL
Description : M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL()
Specification : M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL
C
Estab
5) M S BLOCK 65X173X185
Description : M S BLOCK 65X173X185()
Specification : M. S. BLOCK SIZE- 65X173X185 FOR BRACKET LHS & RHS TO PART NO. 610-03-1202L-1/C & 610-03-1202L-1/A
C
Estab
6) M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL
Description : M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL()
Specification : M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL
C
Estab
7) MS PLATE 25 MM THICK
Description : MS PLATE 25 MM THICK()
Specification : MS PLATE 25 MM THICK × STD. SIZE SPECN: IS:1079, GR ST-42
R
Estab
8) MS ANGLE IRON 50x50x6MM
Description : MS ANGLE IRON 50x50x6MM()
Specification : MS ANGLE IRON 50×50×6MM THICK IN LENGTH 5100 MM AS PER IS:2062
R
Estab
9) MS PLATE 12 MM IS 2062
Description : MS PLATE 12 MM IS 2062()
Specification : MS PLATE 12 MM THICK × 1000 × 2000 MM OR STD. SIZE SPECN. IS:2062 GR "B"
R
Estab
10) MS PLATE 16 MM IS 2062 GR B
Description : MS PLATE 16 MM IS 2062 GR B()
Specification : MS PLATE 16 MM IS-2062 GR "B" SIZE: 16MM THICK × 1250 × 2500/2800 MM LONG
1) WELD ELECTRODE FOR 125 MM HEAD L F NO 1789950443[17]()
Specification : WELDING ELECTRODE FOR 125 MM HEAD EQUIVELANT TO OK-76.18 OF ESAB. SIZE 2.5 MM DIA X 350 MM LENGTH
C
Nonestab
2) WELDING ELECTRODE SIZE 4X450MM L F NO 1785950340[17]()
Specification : WELDING ELECTRODE TO SIZE 4 MM DIA X 450 MM LONG TO CONFORM IS- 814:2004 CODE NO.EB-5426 H2
C
Nonestab
3) WELDING ELECTRODE SIZE 3 POINT 15 MM L F NO 1785950315[17]()
Specification : WELDING ELECTRODE SIZE 3.15MM X 450 MM LONG CONFORMING TO IS : 1395:1982 {CLASSIFICATION E-83 B-M4 UTS- 830 MPA
C
Nonestab
4) ELECTRODE SIA MO 4X350MM L F NO 1789950340[17]()
Specification : COATED METALLIC WELD ELECTRODE OF 18% Cr,8% Ni,6% Mn SIZE 4X 350MM BRANDS:SIA MO OF M/S D&H SECHRON LTD/CRONI 307 MO OF M/S D&H ELECTRODES/METATECH ME 21 SPL STICK ELECTRODE OF M/SMAILAM INDIA LTD/AUSTENITIC STICK ELECTRODE 4 & 5MM DIA "C
C
Nonestab
5) ELECTRODE FOR WELDING L F NO 1789950440[17]()
Specification : ELECTRODE FOR WELDING 4MM X450MM TO AWS: E-8018 G BRAND NAME - SUPERTHERM -NI (SPL) OF M/S D & H SECHERON ELETECH LTD. OR OK 73.O8 OF ESAB INDIA OR TENACITO 55 OF ADVANI ORLIKON LTD. OR SUPER-LH(Ni)SPL OF D&H(I)LTD. OR WA-8018 G OF WELD A
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) All size of MMAW welding Electrodes
Description : All size of MMAW welding Electrodes()
Specification : AS PER GCF /DRG/SPECN/IS/BS
P
Estab
2) All types of welding Electrodes in the sizes dia 3.15 mm, dia 4.0 mm and 5.0 mm length 350 mm & 450m
Description : All types of welding Electrodes in the sizes dia 3.15 mm, dia 4.0 mm and 5.0 mm length 350 mm & 450m()
Specification : As per IS/IRS class A1, A2, A4, B2 & D
P
Estab
Category : p
Grade : 3
Size :
O
3065
System Engineering Enterprises
6-B/B, 1st Floor, Kalyan Vishranti Bhawan, Station Road Indore M.P.
PIN1 : 452001
Phone No. : 0731-2529228
1) Set of Peneumatic Cylinder & Its accessories as per list-9013198424000SK-MPV-01&02
Description : Set of Peneumatic Cylinder & Its accessories as per list-9013198424000SK-MPV-01&02()
1) All types of welding Electrodes in the sizes dia 3.15 mm, dia 4.0 mm and 5.0 mm length 350 mm & 450m
Description : All types of welding Electrodes in the sizes dia 3.15 mm, dia 4.0 mm and 5.0 mm length 350 mm & 450m()
Specification : As per IS/IRS class A1, A2, A4, B2 & D
P
Estab
2) Wires for TIG & MIG Welding
Description : Wires for TIG & MIG Welding()
Specification : As per GCF Requirements
P
Estab
3) Nozzels
Description : Nozzels()
Specification : As per GCF Spcn./Drg./Size & requirements
P
Estab
Category : s
Grade : 3
Size :
O
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) PTFE (TEFLON) THREAD SEAL TAPE EACH OF 10 MTR. LONG X 12 MM 1(ROLL WIDE) SAMSON MAKE
Description : PTFE (TEFLON) THREAD SEAL TAPE EACH OF 10 MTR. LONG X 12 MM 1(ROLL WIDE) SAMSON MAKE()
Specification : 10 MTR. LONG X 12 MM 1(ROLL WIDE) SAMSON MAKE
P
Estab
Category : s
Grade : 3
Size :
S
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) PTFE (TEFLON) THREAD SEAL TAPE EACH OF 10 MTR. LONG X 12 MM 1(ROLL WIDE) SAMSON MAKE
Description : PTFE (TEFLON) THREAD SEAL TAPE EACH OF 10 MTR. LONG X 12 MM 1(ROLL WIDE) SAMSON MAKE()
Specification : 10 MTR. LONG X 12 MM 1(ROLL WIDE) SAMSON MAKE
1) M-SEAL GENERAL PURPOSE EPOXY COMPOUND (MS-801/MSH-250)
Description : M-SEAL GENERAL PURPOSE EPOXY COMPOUND (MS-801/MSH-250)()
Specification : M-SEAL GENERAL PURPOSE EPOXY COMPOUND (MS-801/MSH-250)
P
Estab
2) PLASTIC PUTTY FOR MPV
Description : PLASTIC PUTTY FOR MPV()
Specification : PLASTIC PUTTY FOR MPV
P
Estab
3) QUICK DRYING (Q.D.) THINNER FOR FINISH AS PER TELCO STANDARD SS-7530
Description : QUICK DRYING (Q.D.) THINNER FOR FINISH AS PER TELCO STANDARD SS-7530()
Specification : QUICK DRYING (Q.D.) THINNER FOR FINISH AS PER TELCO STANDARD SS-7530
P
Estab
4) Thinner NC Base
Description : Thinner NC Base()
Specification : Thinner NC Base IS 1873-1961
P
Estab
5) Paint RFU Golden Yellow
Description : Paint RFU Golden Yellow()
Specification : As per specification / drg.
P
Estab
6) ACRALKD MATT FINISH QD PAINT
Description : ACRALKD MATT FINISH QD PAINT()
Specification : ACRALKD MATT FINISH QD PAINT AS PER TELCO SPEC.SS:7335A COLOUR SCAMIC TO IS :5-91 COLOUR SHADE NO 294
Specification : PAINT ENAMEL RFU SYNTHETIC EXTERIOR FINISHING BRUSHING GOLDEN YELLOW I.S COLOUR NO. 356 MAKE SHALIMAR/ASIAN/BERGER/BOMBAY/J&N/GOODLESS/NEROLAC AND PACKED IN 20 LTR M.S. DRUM
P
Estab
2) LPTA Thinner
Description : LPTA Thinner()
Specification : QUICK DRYING (Q.D.) THINNER FOR FINISH PAINTS AS PER TELCO STANDARD SS- 7530
P
Estab
3) Paint White
Description : Paint White()
Specification : As per specification / drg
P
Estab
4) Paint Black
Description : Paint Black()
Specification : AS per specification / drg
P
Estab
5) Paint Signal Red Colour 537
Description : Paint Signal Red Colour 537()
Specification : As per specification / drg.
P
Estab
Category : s
Grade : 3
Size :
S
1Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) M S WIRE
Description : M S WIRE()
Specification : M. S. WIRE 4MM DIA IS:280-19781/2 HARD BRIGHT CONDITION
R
Estab
Category : s
Grade : 3
Size :
O
3070
VIJAY SEALS
INDUSTRIAL ESTATE PO UMAYANALLOOR KOLLAM Kerala
PIN1 : 691589
Phone No. : 2531567 GSTIN :
32AAAFV8046K1Z1
1) Set of Peneumatic Cylinder & Its accessories as per list-9013198424000SK-MPV-01&02
Description : Set of Peneumatic Cylinder & Its accessories as per list-9013198424000SK-MPV-01&02()
1) CIRCLIP A14X1 IS 3075
Description : CIRCLIP A14X1 IS 3075()
Specification : CIRCLIP A14X1 IS:3075
C
Estab
2) Dunadhesive 758 dendrite PC 65
Description : Dunadhesive 758 dendrite PC 65()
Specification : POLYCHLOROPRENE BASE DUNLOP ADHESIVE S-758 OR DENDRITE PC- 65 CAPACITY ALSO TO JOINT RUBBER TO STEEL PACKED IN 5 LTR TIN AS PER TS-25408
P
Estab
3) HEX BOLT M 20 120 MPV
Description : HEX BOLT M 20 120 MPV()
Specification : HEX BOLT M20X120 TO IS:1364 FOR MPV GRADE 8.8
C
Estab
4) SPLIT PIN 1 POINT 6 X10L IS 549
Description : SPLIT PIN 1 POINT 6 X10L IS 549()
Specification : SPLIT PIN 1.6X10 L IS:549
C
Estab
5) SPLIT PIN 1 POINT 6 X12L IS 549
Description : SPLIT PIN 1 POINT 6 X12L IS 549()
Specification : SPLIT PIN 1.6X12L IS:549
C
Estab
6) SPLIT PIN 3 POINT 2 X 25 L IS 549
Description : SPLIT PIN 3 POINT 2 X 25 L IS 549()
Specification : SPLIT PIN 3.2X25L IS:549
C
Estab
7) SPLIT PIN 2 POINT 5 X 25L IS 549
Description : SPLIT PIN 2 POINT 5 X 25L IS 549()
Specification : SPLIT PIN 2.5X25L IS:549
C
Estab
8) SPLIT PIN 5 50 IS 549
Description : SPLIT PIN 5 50 IS 549()
Specification : SPLIT PIN 5X50 IS:549
C
Estab
9) SPRING WASHER M20 IS 6735
Description : SPRING WASHER M20 IS 6735()
Specification : SPRING WASHER M20 IS:6735
C
Estab
10) synthetic adhesive make dunlop of grade S758 oblique fevicol SR998
Description : synthetic adhesive make dunlop of grade S758 oblique fevicol SR998()
Specification : synthetic adhesive make dunlop of grade S758 oblique fevicol SR998
P
Estab
11) HEX NUT M20 IS1363()
Specification : HEX NUT M20 IS:1363
C
Estab
Category : s
Grade : 3
Size :
S
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) CIRCLIP A14X1 IS 3075
Description : CIRCLIP A14X1 IS 3075()
Specification : CIRCLIP A14X1 IS:3075
C
Estab
2) Dunadhesive 758 dendrite PC 65
Description : Dunadhesive 758 dendrite PC 65()
Specification : POLYCHLOROPRENE BASE DUNLOP ADHESIVE S-758 OR DENDRITE PC- 65 CAPACITY ALSO TO JOINT RUBBER TO STEEL PACKED IN 5 LTR TIN AS PER TS-25408
P
Estab
3) HEX BOLT M 20 120 MPV
Description : HEX BOLT M 20 120 MPV()
Specification : HEX BOLT M20X120 TO IS:1364 FOR MPV GRADE 8.8
C
Estab
4) SPLIT PIN 1 POINT 6 X10L IS 549
Description : SPLIT PIN 1 POINT 6 X10L IS 549()
Specification : SPLIT PIN 1.6X10 L IS:549
C
Estab
5) SPLIT PIN 1 POINT 6 X12L IS 549
Description : SPLIT PIN 1 POINT 6 X12L IS 549()
Specification : SPLIT PIN 1.6X12L IS:549
C
Estab
6) SPLIT PIN 3 POINT 2 X 25 L IS 549
Description : SPLIT PIN 3 POINT 2 X 25 L IS 549()
Specification : SPLIT PIN 3.2X25L IS:549
C
Estab
7) SPLIT PIN 2 POINT 5 X 25L IS 549
Description : SPLIT PIN 2 POINT 5 X 25L IS 549()
Specification : SPLIT PIN 2.5X25L IS:549
C
Estab
8) SPLIT PIN 5 50 IS 549
Description : SPLIT PIN 5 50 IS 549()
Specification : SPLIT PIN 5X50 IS:549
C
Estab
9) SPRING WASHER M20 IS 6735
Description : SPRING WASHER M20 IS 6735()
Specification : SPRING WASHER M20 IS:6735
C
Estab
10) synthetic adhesive make dunlop of grade S758 oblique fevicol SR998
Description : synthetic adhesive make dunlop of grade S758 oblique fevicol SR998()
Specification : synthetic adhesive make dunlop of grade S758 oblique fevicol SR998
P
Estab
11) HEX NUT M20 IS1363()
Specification : HEX NUT M20 IS:1363
C
Estab
Category : s
Grade : 3
Size :
S
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) Cr PLTD DE SPANNER 8X9
Description : Cr PLTD DE SPANNER 8X9()
Specification : CROME PLATED DE SPANNER 8X9 EVEREST/TAAPARIA/GEDORE/JHALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700111-V3.
S
Estab
2) Cr PLTD DE SPANNER 14X15
Description : Cr PLTD DE SPANNER 14X15()
Specification : CROME PLATED DE SPANNER 14X15 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700211-V4
S
Estab
3) NIC CROME PLATED RING SPA10X11
Description : NIC CROME PLATED RING SPA10X11()
Specification : CROME PLATED RING SPANNER 10X11 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/ BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.F4735500-V2
S
Estab
4) CROME PLATED DE SPANNER 25X28
Description : CROME PLATED DE SPANNER 25X28()
Specification : CROME PLATED DE SPANNER 25X28 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A -SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.X4700611-V4 DRG. NO. X4700211-V4
Specification : CROME PLATED SCREW DRIVER 8"(200mm 1.6X10 mm) EVEREST/TAAPAR IA/AMBIKA TOOLS/GEDORE/JHALANI/JK/JHALANI EXPERT/BETA/VENUS MAKE AS PER IS:844 (PART-II)MADE OF CHROME VANADIUM STEEL.
S
Estab
6) Cr PLTD DE SPANNER 12 X 13 mm
Description : Cr PLTD DE SPANNER 12 X 13 mm()
Specification : CROME PLATED DE SPANNER 12 X 13 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS:2028-A-SERIES-C MADE OF CROME VANADIUM STEEL.
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 10 MM EVEREST/TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/ VENUS/ JK/BETA MAKE AS PER IS:3082 MADE OF CROME VANADIUM STEEL.
S
Estab
9) Cr PLTD DE SPANNER 24X26
Description : Cr PLTD DE SPANNER 24X26()
Specification : CROME PLATED DE SPANNER 24X26 mm EVEREST/TAAPARIA/GEDORE/JHA LANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS:2028 -A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X 4700511-V3.
S
Estab
10) NIC CROME PLATED RING SPA18X19
Description : NIC CROME PLATED RING SPA18X19()
Specification : CROME PLATED RING SPANNER 18X19 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKAA/VENUS TOOLS MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. DRG.NO.X4704011-V2
S
Estab
11) CROME PLATED DE SPANNER 21X23
Description : CROME PLATED DE SPANNER 21X23()
Specification : CROME PLATED DE SPANNER 21X23mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS:2028- A-SERIES-C MADE OF CROME VANADIUM STEEL.
S
Estab
12) Cr PLTD DE SPANNER 16 X 17
Description : Cr PLTD DE SPANNER 16 X 17()
Specification : CROME PLATED DE SPANNER 16 X 17 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/MAKE AS PER IS 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4734911-V3.
S
Estab
13) NIC CROME PLATED RING SPA19X22
Description : NIC CROME PLATED RING SPA19X22()
Specification : CROME PLATED RING SPANNER 19X22 mm EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/J K/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4701011-V2.
S
Estab
14) CROME PLATED DE SPANNER 24X27
Description : CROME PLATED DE SPANNER 24X27()
Specification : CROME PLATED DE SPANNER 24X27mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE ACCEPTABL E AS PER IS-2028-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO- X4700411-V3.
S
Estab
15) NIC CROME PLATED RING SPA24X27
Description : NIC CROME PLATED RING SPA24X27()
Specification : CROME PLATED RING SPANNER 24X27 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER -IS:2029-1998-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO.X4701111-V2.
S
Estab
16) NIC CROME PLATED RING SPA14X15
Description : NIC CROME PLATED RING SPA14X15()
Specification : CROME PLATED RING SPANNER 14X15 MM EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700911-V2.
S
Estab
17) Cr PLTD DE SPANNER 19X22
Description : Cr PLTD DE SPANNER 19X22()
Specification : CROME PLATED DE SPANNER 19X22 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. X4700311-V4 DRG.NO. X4700211-V4.
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 12MM EVER EST /TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/JK/ BETA/VENUS/ MAKE AS PER IS:3082-MADE OF CHROME VANADIUM STEEL. PART NO. X4700711-V2.
S
Estab
19) NIC CROME PLATED RING SPA16X17
Description : NIC CROME PLATED RING SPA16X17()
Specification : CROME PLATED RING SPANNER 16X17 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4735211 V2.
S
Estab
20) NIC CROME PLATED RING SPA12X13
Description : NIC CROME PLATED RING SPA12X13()
Specification : CROME PLATED RING SPANNER 12X13 MM EVEREST/TAAPARIA/GEDORE/J HALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700811-V2.
S
Estab
21) DE SPANNER SAE 5 by 8 inch X 9 by 16 inch
Description : DE SPANNER SAE 5 by 8 inch X 9 by 16 inch()
Specification : CHROME PLATED - DE SPANNER SAE 5/8" X 9/16" (A/F S1 - 0.629" / 0.633" X S2 - 0.566" / 0.570"), OVERALL LENGTH 150MM MIN. MAKE - EVEREST/TAPARIA/AMBIKA TOOLS/JHALANI EXPERT/JK/BETA /GEDORE/JHALANI/VENUS/ , MADE OF CHROME VANADIUM STEEL,OTH
S
Estab
22) CR PL SCREW DRIVER12 inch X 2 X 13
Description : CR PL SCREW DRIVER12 inch X 2 X 13()
Specification : CROME PLATED SCREW DRIVER 12"(300 mm)X2.0mm X13 mm EVEREST/T AAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/JHALANI EXPE RT/VENUS MAKE AS PER IS:844 (PART-II) MADE OF CHROME VANADIUM STEEL.
Specification : CROME PLATED SCREW DRIVER PHILIPS 100LG 6 DIA TIP NO-2 EVEREST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS/JHALANI/JK/BETA/ JHALANI EXPERT MAKE MADE OF CROME VANADIUM STEEL.
S
Estab
24) CR PL BALL PEIN HAMMER160Z by 500
Description : CR PL BALL PEIN HAMMER160Z by 500()
Specification : BALL PEIN HAMMER 160Z/500 GMS EVEREST/ TAAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/VENUS/ JHALANI EXPORT MAKE AS PER IS:841 MADE OF CHROME VANADIUM STEEL.PART NO.F4730200-V1.
S
Estab
25) BOLT M10 PART NO L1021009
Description : BOLT M10 PART NO L1021009()
Specification : BOLT M10 X 45 (102-18) BOLT M10 X 1.5 X 45 (102-18) IS:1364-92 PT-1 P.8.8 GALVD & YELLOW PASSIVATED
C
Estab
26) SPLIT PIN 2 X25L IS 549
Description : SPLIT PIN 2 X25L IS 549()
Specification : SPLIT PIN 2.0X25L IS:549
C
Estab
Category : s
Grade : 3
Size :
S
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) Cr PLTD DE SPANNER 8X9
Description : Cr PLTD DE SPANNER 8X9()
Specification : CROME PLATED DE SPANNER 8X9 EVEREST/TAAPARIA/GEDORE/JHALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700111-V3.
S
Estab
2) Cr PLTD DE SPANNER 14X15
Description : Cr PLTD DE SPANNER 14X15()
Specification : CROME PLATED DE SPANNER 14X15 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700211-V4
S
Estab
3) NIC CROME PLATED RING SPA10X11
Description : NIC CROME PLATED RING SPA10X11()
Specification : CROME PLATED RING SPANNER 10X11 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/ BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.F4735500-V2
S
Estab
4) CROME PLATED DE SPANNER 25X28
Description : CROME PLATED DE SPANNER 25X28()
Specification : CROME PLATED DE SPANNER 25X28 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A -SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.X4700611-V4 DRG. NO. X4700211-V4
Specification : CROME PLATED SCREW DRIVER 8"(200mm 1.6X10 mm) EVEREST/TAAPAR IA/AMBIKA TOOLS/GEDORE/JHALANI/JK/JHALANI EXPERT/BETA/VENUS MAKE AS PER IS:844 (PART-II)MADE OF CHROME VANADIUM STEEL.
S
Estab
6) Cr PLTD DE SPANNER 12 X 13 mm
Description : Cr PLTD DE SPANNER 12 X 13 mm()
Specification : CROME PLATED DE SPANNER 12 X 13 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS:2028-A-SERIES-C MADE OF CROME VANADIUM STEEL.
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 10 MM EVEREST/TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/ VENUS/ JK/BETA MAKE AS PER IS:3082 MADE OF CROME VANADIUM STEEL.
S
Estab
9) Cr PLTD DE SPANNER 24X26
Description : Cr PLTD DE SPANNER 24X26()
Specification : CROME PLATED DE SPANNER 24X26 mm EVEREST/TAAPARIA/GEDORE/JHA LANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS:2028 -A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X 4700511-V3.
S
Estab
10) NIC CROME PLATED RING SPA18X19
Description : NIC CROME PLATED RING SPA18X19()
Specification : CROME PLATED RING SPANNER 18X19 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKAA/VENUS TOOLS MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. DRG.NO.X4704011-V2
S
Estab
11) CROME PLATED DE SPANNER 21X23
Description : CROME PLATED DE SPANNER 21X23()
Specification : CROME PLATED DE SPANNER 21X23mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS:2028- A-SERIES-C MADE OF CROME VANADIUM STEEL.
S
Estab
12) Cr PLTD DE SPANNER 16 X 17
Description : Cr PLTD DE SPANNER 16 X 17()
Specification : CROME PLATED DE SPANNER 16 X 17 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/MAKE AS PER IS 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4734911-V3.
S
Estab
13) NIC CROME PLATED RING SPA19X22
Description : NIC CROME PLATED RING SPA19X22()
Specification : CROME PLATED RING SPANNER 19X22 mm EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/J K/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4701011-V2.
S
Estab
14) CROME PLATED DE SPANNER 24X27
Description : CROME PLATED DE SPANNER 24X27()
Specification : CROME PLATED DE SPANNER 24X27mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE ACCEPTABL E AS PER IS-2028-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO- X4700411-V3.
S
Estab
15) NIC CROME PLATED RING SPA24X27
Description : NIC CROME PLATED RING SPA24X27()
Specification : CROME PLATED RING SPANNER 24X27 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER -IS:2029-1998-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO.X4701111-V2.
S
Estab
16) NIC CROME PLATED RING SPA14X15
Description : NIC CROME PLATED RING SPA14X15()
Specification : CROME PLATED RING SPANNER 14X15 MM EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700911-V2.
S
Estab
17) Cr PLTD DE SPANNER 19X22
Description : Cr PLTD DE SPANNER 19X22()
Specification : CROME PLATED DE SPANNER 19X22 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. X4700311-V4 DRG.NO. X4700211-V4.
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 12MM EVER EST /TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/JK/ BETA/VENUS/ MAKE AS PER IS:3082-MADE OF CHROME VANADIUM STEEL. PART NO. X4700711-V2.
S
Estab
19) NIC CROME PLATED RING SPA16X17
Description : NIC CROME PLATED RING SPA16X17()
Specification : CROME PLATED RING SPANNER 16X17 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4735211 V2.
S
Estab
20) NIC CROME PLATED RING SPA12X13
Description : NIC CROME PLATED RING SPA12X13()
Specification : CROME PLATED RING SPANNER 12X13 MM EVEREST/TAAPARIA/GEDORE/J HALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700811-V2.
S
Estab
21) DE SPANNER SAE 5 by 8 inch X 9 by 16 inch
Description : DE SPANNER SAE 5 by 8 inch X 9 by 16 inch()
Specification : CHROME PLATED - DE SPANNER SAE 5/8" X 9/16" (A/F S1 - 0.629" / 0.633" X S2 - 0.566" / 0.570"), OVERALL LENGTH 150MM MIN. MAKE - EVEREST/TAPARIA/AMBIKA TOOLS/JHALANI EXPERT/JK/BETA /GEDORE/JHALANI/VENUS/ , MADE OF CHROME VANADIUM STEEL,OTH
S
Estab
22) CR PL SCREW DRIVER12 inch X 2 X 13
Description : CR PL SCREW DRIVER12 inch X 2 X 13()
Specification : CROME PLATED SCREW DRIVER 12"(300 mm)X2.0mm X13 mm EVEREST/T AAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/JHALANI EXPE RT/VENUS MAKE AS PER IS:844 (PART-II) MADE OF CHROME VANADIUM STEEL.
Specification : CROME PLATED SCREW DRIVER PHILIPS 100LG 6 DIA TIP NO-2 EVEREST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS/JHALANI/JK/BETA/ JHALANI EXPERT MAKE MADE OF CROME VANADIUM STEEL.
S
Estab
24) CR PL BALL PEIN HAMMER160Z by 500
Description : CR PL BALL PEIN HAMMER160Z by 500()
Specification : BALL PEIN HAMMER 160Z/500 GMS EVEREST/ TAAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/VENUS/ JHALANI EXPORT MAKE AS PER IS:841 MADE OF CHROME VANADIUM STEEL.PART NO.F4730200-V1.
S
Estab
25) BOLT M10 PART NO L1021009
Description : BOLT M10 PART NO L1021009()
Specification : BOLT M10 X 45 (102-18) BOLT M10 X 1.5 X 45 (102-18) IS:1364-92 PT-1 P.8.8 GALVD & YELLOW PASSIVATED
C
Estab
26) SPLIT PIN 2 X25L IS 549
Description : SPLIT PIN 2 X25L IS 549()
Specification : SPLIT PIN 2.0X25L IS:549
C
Estab
Category : s
Grade : 3
Size :
S
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) Cr PLTD DE SPANNER 8X9
Description : Cr PLTD DE SPANNER 8X9()
Specification : CROME PLATED DE SPANNER 8X9 EVEREST/TAAPARIA/GEDORE/JHALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700111-V3.
S
Estab
2) Cr PLTD DE SPANNER 14X15
Description : Cr PLTD DE SPANNER 14X15()
Specification : CROME PLATED DE SPANNER 14X15 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700211-V4
S
Estab
3) NIC CROME PLATED RING SPA10X11
Description : NIC CROME PLATED RING SPA10X11()
Specification : CROME PLATED RING SPANNER 10X11 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/ BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.F4735500-V2
S
Estab
4) CROME PLATED DE SPANNER 25X28
Description : CROME PLATED DE SPANNER 25X28()
Specification : CROME PLATED DE SPANNER 25X28 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A -SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.X4700611-V4 DRG. NO. X4700211-V4
Specification : CROME PLATED SCREW DRIVER 8"(200mm 1.6X10 mm) EVEREST/TAAPAR IA/AMBIKA TOOLS/GEDORE/JHALANI/JK/JHALANI EXPERT/BETA/VENUS MAKE AS PER IS:844 (PART-II)MADE OF CHROME VANADIUM STEEL.
S
Estab
6) Cr PLTD DE SPANNER 12 X 13 mm
Description : Cr PLTD DE SPANNER 12 X 13 mm()
Specification : CROME PLATED DE SPANNER 12 X 13 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS:2028-A-SERIES-C MADE OF CROME VANADIUM STEEL.
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 10 MM EVEREST/TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/ VENUS/ JK/BETA MAKE AS PER IS:3082 MADE OF CROME VANADIUM STEEL.
S
Estab
9) Cr PLTD DE SPANNER 24X26
Description : Cr PLTD DE SPANNER 24X26()
Specification : CROME PLATED DE SPANNER 24X26 mm EVEREST/TAAPARIA/GEDORE/JHA LANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS:2028 -A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X 4700511-V3.
S
Estab
10) NIC CROME PLATED RING SPA18X19
Description : NIC CROME PLATED RING SPA18X19()
Specification : CROME PLATED RING SPANNER 18X19 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKAA/VENUS TOOLS MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. DRG.NO.X4704011-V2
S
Estab
11) CROME PLATED DE SPANNER 21X23
Description : CROME PLATED DE SPANNER 21X23()
Specification : CROME PLATED DE SPANNER 21X23mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS:2028- A-SERIES-C MADE OF CROME VANADIUM STEEL.
S
Estab
12) Cr PLTD DE SPANNER 16 X 17
Description : Cr PLTD DE SPANNER 16 X 17()
Specification : CROME PLATED DE SPANNER 16 X 17 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/MAKE AS PER IS 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4734911-V3.
S
Estab
13) NIC CROME PLATED RING SPA19X22
Description : NIC CROME PLATED RING SPA19X22()
Specification : CROME PLATED RING SPANNER 19X22 mm EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/J K/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4701011-V2.
S
Estab
14) CROME PLATED DE SPANNER 24X27
Description : CROME PLATED DE SPANNER 24X27()
Specification : CROME PLATED DE SPANNER 24X27mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE ACCEPTABL E AS PER IS-2028-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO- X4700411-V3.
S
Estab
15) NIC CROME PLATED RING SPA24X27
Description : NIC CROME PLATED RING SPA24X27()
Specification : CROME PLATED RING SPANNER 24X27 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER -IS:2029-1998-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO.X4701111-V2.
S
Estab
16) NIC CROME PLATED RING SPA14X15
Description : NIC CROME PLATED RING SPA14X15()
Specification : CROME PLATED RING SPANNER 14X15 MM EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700911-V2.
S
Estab
17) Cr PLTD DE SPANNER 19X22
Description : Cr PLTD DE SPANNER 19X22()
Specification : CROME PLATED DE SPANNER 19X22 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. X4700311-V4 DRG.NO. X4700211-V4.
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 12MM EVER EST /TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/JK/ BETA/VENUS/ MAKE AS PER IS:3082-MADE OF CHROME VANADIUM STEEL. PART NO. X4700711-V2.
S
Estab
19) NIC CROME PLATED RING SPA16X17
Description : NIC CROME PLATED RING SPA16X17()
Specification : CROME PLATED RING SPANNER 16X17 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4735211 V2.
S
Estab
20) NIC CROME PLATED RING SPA12X13
Description : NIC CROME PLATED RING SPA12X13()
Specification : CROME PLATED RING SPANNER 12X13 MM EVEREST/TAAPARIA/GEDORE/J HALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700811-V2.
S
Estab
21) DE SPANNER SAE 5 by 8 inch X 9 by 16 inch
Description : DE SPANNER SAE 5 by 8 inch X 9 by 16 inch()
Specification : CHROME PLATED - DE SPANNER SAE 5/8" X 9/16" (A/F S1 - 0.629" / 0.633" X S2 - 0.566" / 0.570"), OVERALL LENGTH 150MM MIN. MAKE - EVEREST/TAPARIA/AMBIKA TOOLS/JHALANI EXPERT/JK/BETA /GEDORE/JHALANI/VENUS/ , MADE OF CHROME VANADIUM STEEL,OTH
S
Estab
22) CR PL SCREW DRIVER12 inch X 2 X 13
Description : CR PL SCREW DRIVER12 inch X 2 X 13()
Specification : CROME PLATED SCREW DRIVER 12"(300 mm)X2.0mm X13 mm EVEREST/T AAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/JHALANI EXPE RT/VENUS MAKE AS PER IS:844 (PART-II) MADE OF CHROME VANADIUM STEEL.
Specification : CROME PLATED SCREW DRIVER PHILIPS 100LG 6 DIA TIP NO-2 EVEREST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS/JHALANI/JK/BETA/ JHALANI EXPERT MAKE MADE OF CROME VANADIUM STEEL.
S
Estab
24) CR PL BALL PEIN HAMMER160Z by 500
Description : CR PL BALL PEIN HAMMER160Z by 500()
Specification : BALL PEIN HAMMER 160Z/500 GMS EVEREST/ TAAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/VENUS/ JHALANI EXPORT MAKE AS PER IS:841 MADE OF CHROME VANADIUM STEEL.PART NO.F4730200-V1.
S
Estab
25) BOLT M10 PART NO L1021009
Description : BOLT M10 PART NO L1021009()
Specification : BOLT M10 X 45 (102-18) BOLT M10 X 1.5 X 45 (102-18) IS:1364-92 PT-1 P.8.8 GALVD & YELLOW PASSIVATED
C
Estab
26) SPLIT PIN 2 X25L IS 549
Description : SPLIT PIN 2 X25L IS 549()
Specification : SPLIT PIN 2.0X25L IS:549
C
Estab
Category : s
Grade : 3
Size :
S
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) Cr PLTD DE SPANNER 8X9
Description : Cr PLTD DE SPANNER 8X9()
Specification : CROME PLATED DE SPANNER 8X9 EVEREST/TAAPARIA/GEDORE/JHALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700111-V3.
S
Estab
2) Cr PLTD DE SPANNER 14X15
Description : Cr PLTD DE SPANNER 14X15()
Specification : CROME PLATED DE SPANNER 14X15 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700211-V4
S
Estab
3) NIC CROME PLATED RING SPA10X11
Description : NIC CROME PLATED RING SPA10X11()
Specification : CROME PLATED RING SPANNER 10X11 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/ BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.F4735500-V2
S
Estab
4) CROME PLATED DE SPANNER 25X28
Description : CROME PLATED DE SPANNER 25X28()
Specification : CROME PLATED DE SPANNER 25X28 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A -SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.X4700611-V4 DRG. NO. X4700211-V4
Specification : CROME PLATED SCREW DRIVER 8"(200mm 1.6X10 mm) EVEREST/TAAPAR IA/AMBIKA TOOLS/GEDORE/JHALANI/JK/JHALANI EXPERT/BETA/VENUS MAKE AS PER IS:844 (PART-II)MADE OF CHROME VANADIUM STEEL.
S
Estab
6) Cr PLTD DE SPANNER 12 X 13 mm
Description : Cr PLTD DE SPANNER 12 X 13 mm()
Specification : CROME PLATED DE SPANNER 12 X 13 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS:2028-A-SERIES-C MADE OF CROME VANADIUM STEEL.
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 10 MM EVEREST/TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/ VENUS/ JK/BETA MAKE AS PER IS:3082 MADE OF CROME VANADIUM STEEL.
S
Estab
9) Cr PLTD DE SPANNER 24X26
Description : Cr PLTD DE SPANNER 24X26()
Specification : CROME PLATED DE SPANNER 24X26 mm EVEREST/TAAPARIA/GEDORE/JHA LANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS:2028 -A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X 4700511-V3.
S
Estab
10) NIC CROME PLATED RING SPA18X19
Description : NIC CROME PLATED RING SPA18X19()
Specification : CROME PLATED RING SPANNER 18X19 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKAA/VENUS TOOLS MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. DRG.NO.X4704011-V2
S
Estab
11) CROME PLATED DE SPANNER 21X23
Description : CROME PLATED DE SPANNER 21X23()
Specification : CROME PLATED DE SPANNER 21X23mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS:2028- A-SERIES-C MADE OF CROME VANADIUM STEEL.
S
Estab
12) Cr PLTD DE SPANNER 16 X 17
Description : Cr PLTD DE SPANNER 16 X 17()
Specification : CROME PLATED DE SPANNER 16 X 17 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/MAKE AS PER IS 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4734911-V3.
S
Estab
13) NIC CROME PLATED RING SPA19X22
Description : NIC CROME PLATED RING SPA19X22()
Specification : CROME PLATED RING SPANNER 19X22 mm EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/J K/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4701011-V2.
S
Estab
14) CROME PLATED DE SPANNER 24X27
Description : CROME PLATED DE SPANNER 24X27()
Specification : CROME PLATED DE SPANNER 24X27mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE ACCEPTABL E AS PER IS-2028-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO- X4700411-V3.
S
Estab
15) NIC CROME PLATED RING SPA24X27
Description : NIC CROME PLATED RING SPA24X27()
Specification : CROME PLATED RING SPANNER 24X27 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER -IS:2029-1998-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO.X4701111-V2.
S
Estab
16) NIC CROME PLATED RING SPA14X15
Description : NIC CROME PLATED RING SPA14X15()
Specification : CROME PLATED RING SPANNER 14X15 MM EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700911-V2.
S
Estab
17) Cr PLTD DE SPANNER 19X22
Description : Cr PLTD DE SPANNER 19X22()
Specification : CROME PLATED DE SPANNER 19X22 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. X4700311-V4 DRG.NO. X4700211-V4.
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 12MM EVER EST /TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/JK/ BETA/VENUS/ MAKE AS PER IS:3082-MADE OF CHROME VANADIUM STEEL. PART NO. X4700711-V2.
S
Estab
19) NIC CROME PLATED RING SPA16X17
Description : NIC CROME PLATED RING SPA16X17()
Specification : CROME PLATED RING SPANNER 16X17 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4735211 V2.
S
Estab
20) NIC CROME PLATED RING SPA12X13
Description : NIC CROME PLATED RING SPA12X13()
Specification : CROME PLATED RING SPANNER 12X13 MM EVEREST/TAAPARIA/GEDORE/J HALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700811-V2.
S
Estab
21) DE SPANNER SAE 5 by 8 inch X 9 by 16 inch
Description : DE SPANNER SAE 5 by 8 inch X 9 by 16 inch()
Specification : CHROME PLATED - DE SPANNER SAE 5/8" X 9/16" (A/F S1 - 0.629" / 0.633" X S2 - 0.566" / 0.570"), OVERALL LENGTH 150MM MIN. MAKE - EVEREST/TAPARIA/AMBIKA TOOLS/JHALANI EXPERT/JK/BETA /GEDORE/JHALANI/VENUS/ , MADE OF CHROME VANADIUM STEEL,OTH
S
Estab
22) CR PL SCREW DRIVER12 inch X 2 X 13
Description : CR PL SCREW DRIVER12 inch X 2 X 13()
Specification : CROME PLATED SCREW DRIVER 12"(300 mm)X2.0mm X13 mm EVEREST/T AAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/JHALANI EXPE RT/VENUS MAKE AS PER IS:844 (PART-II) MADE OF CHROME VANADIUM STEEL.
Specification : CROME PLATED SCREW DRIVER PHILIPS 100LG 6 DIA TIP NO-2 EVEREST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS/JHALANI/JK/BETA/ JHALANI EXPERT MAKE MADE OF CROME VANADIUM STEEL.
S
Estab
24) CR PL BALL PEIN HAMMER160Z by 500
Description : CR PL BALL PEIN HAMMER160Z by 500()
Specification : BALL PEIN HAMMER 160Z/500 GMS EVEREST/ TAAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/VENUS/ JHALANI EXPORT MAKE AS PER IS:841 MADE OF CHROME VANADIUM STEEL.PART NO.F4730200-V1.
S
Estab
25) BOLT M10 PART NO L1021009
Description : BOLT M10 PART NO L1021009()
Specification : BOLT M10 X 45 (102-18) BOLT M10 X 1.5 X 45 (102-18) IS:1364-92 PT-1 P.8.8 GALVD & YELLOW PASSIVATED
C
Estab
26) SPLIT PIN 2 X25L IS 549
Description : SPLIT PIN 2 X25L IS 549()
Specification : SPLIT PIN 2.0X25L IS:549
C
Estab
Category : s
Grade : 3
Size :
S
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) Cr PLTD DE SPANNER 8X9
Description : Cr PLTD DE SPANNER 8X9()
Specification : CROME PLATED DE SPANNER 8X9 EVEREST/TAAPARIA/GEDORE/JHALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700111-V3.
S
Estab
2) Cr PLTD DE SPANNER 14X15
Description : Cr PLTD DE SPANNER 14X15()
Specification : CROME PLATED DE SPANNER 14X15 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700211-V4
S
Estab
3) NIC CROME PLATED RING SPA10X11
Description : NIC CROME PLATED RING SPA10X11()
Specification : CROME PLATED RING SPANNER 10X11 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/ BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.F4735500-V2
S
Estab
4) CROME PLATED DE SPANNER 25X28
Description : CROME PLATED DE SPANNER 25X28()
Specification : CROME PLATED DE SPANNER 25X28 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A -SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.X4700611-V4 DRG. NO. X4700211-V4
Specification : CROME PLATED SCREW DRIVER 8"(200mm 1.6X10 mm) EVEREST/TAAPAR IA/AMBIKA TOOLS/GEDORE/JHALANI/JK/JHALANI EXPERT/BETA/VENUS MAKE AS PER IS:844 (PART-II)MADE OF CHROME VANADIUM STEEL.
S
Estab
6) Cr PLTD DE SPANNER 12 X 13 mm
Description : Cr PLTD DE SPANNER 12 X 13 mm()
Specification : CROME PLATED DE SPANNER 12 X 13 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS:2028-A-SERIES-C MADE OF CROME VANADIUM STEEL.
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 10 MM EVEREST/TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/ VENUS/ JK/BETA MAKE AS PER IS:3082 MADE OF CROME VANADIUM STEEL.
S
Estab
9) Cr PLTD DE SPANNER 24X26
Description : Cr PLTD DE SPANNER 24X26()
Specification : CROME PLATED DE SPANNER 24X26 mm EVEREST/TAAPARIA/GEDORE/JHA LANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS:2028 -A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X 4700511-V3.
S
Estab
10) NIC CROME PLATED RING SPA18X19
Description : NIC CROME PLATED RING SPA18X19()
Specification : CROME PLATED RING SPANNER 18X19 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKAA/VENUS TOOLS MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. DRG.NO.X4704011-V2
S
Estab
11) CROME PLATED DE SPANNER 21X23
Description : CROME PLATED DE SPANNER 21X23()
Specification : CROME PLATED DE SPANNER 21X23mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS:2028- A-SERIES-C MADE OF CROME VANADIUM STEEL.
S
Estab
12) Cr PLTD DE SPANNER 16 X 17
Description : Cr PLTD DE SPANNER 16 X 17()
Specification : CROME PLATED DE SPANNER 16 X 17 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/MAKE AS PER IS 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4734911-V3.
S
Estab
13) NIC CROME PLATED RING SPA19X22
Description : NIC CROME PLATED RING SPA19X22()
Specification : CROME PLATED RING SPANNER 19X22 mm EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/J K/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4701011-V2.
S
Estab
14) CROME PLATED DE SPANNER 24X27
Description : CROME PLATED DE SPANNER 24X27()
Specification : CROME PLATED DE SPANNER 24X27mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE ACCEPTABL E AS PER IS-2028-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO- X4700411-V3.
S
Estab
15) NIC CROME PLATED RING SPA24X27
Description : NIC CROME PLATED RING SPA24X27()
Specification : CROME PLATED RING SPANNER 24X27 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER -IS:2029-1998-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO.X4701111-V2.
S
Estab
16) NIC CROME PLATED RING SPA14X15
Description : NIC CROME PLATED RING SPA14X15()
Specification : CROME PLATED RING SPANNER 14X15 MM EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700911-V2.
S
Estab
17) Cr PLTD DE SPANNER 19X22
Description : Cr PLTD DE SPANNER 19X22()
Specification : CROME PLATED DE SPANNER 19X22 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. X4700311-V4 DRG.NO. X4700211-V4.
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 12MM EVER EST /TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/JK/ BETA/VENUS/ MAKE AS PER IS:3082-MADE OF CHROME VANADIUM STEEL. PART NO. X4700711-V2.
S
Estab
19) NIC CROME PLATED RING SPA16X17
Description : NIC CROME PLATED RING SPA16X17()
Specification : CROME PLATED RING SPANNER 16X17 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4735211 V2.
S
Estab
20) NIC CROME PLATED RING SPA12X13
Description : NIC CROME PLATED RING SPA12X13()
Specification : CROME PLATED RING SPANNER 12X13 MM EVEREST/TAAPARIA/GEDORE/J HALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700811-V2.
S
Estab
21) DE SPANNER SAE 5 by 8 inch X 9 by 16 inch
Description : DE SPANNER SAE 5 by 8 inch X 9 by 16 inch()
Specification : CHROME PLATED - DE SPANNER SAE 5/8" X 9/16" (A/F S1 - 0.629" / 0.633" X S2 - 0.566" / 0.570"), OVERALL LENGTH 150MM MIN. MAKE - EVEREST/TAPARIA/AMBIKA TOOLS/JHALANI EXPERT/JK/BETA /GEDORE/JHALANI/VENUS/ , MADE OF CHROME VANADIUM STEEL,OTH
S
Estab
22) CR PL SCREW DRIVER12 inch X 2 X 13
Description : CR PL SCREW DRIVER12 inch X 2 X 13()
Specification : CROME PLATED SCREW DRIVER 12"(300 mm)X2.0mm X13 mm EVEREST/T AAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/JHALANI EXPE RT/VENUS MAKE AS PER IS:844 (PART-II) MADE OF CHROME VANADIUM STEEL.
Specification : CROME PLATED SCREW DRIVER PHILIPS 100LG 6 DIA TIP NO-2 EVEREST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS/JHALANI/JK/BETA/ JHALANI EXPERT MAKE MADE OF CROME VANADIUM STEEL.
S
Estab
24) CR PL BALL PEIN HAMMER160Z by 500
Description : CR PL BALL PEIN HAMMER160Z by 500()
Specification : BALL PEIN HAMMER 160Z/500 GMS EVEREST/ TAAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/VENUS/ JHALANI EXPORT MAKE AS PER IS:841 MADE OF CHROME VANADIUM STEEL.PART NO.F4730200-V1.
S
Estab
25) BOLT M10 PART NO L1021009
Description : BOLT M10 PART NO L1021009()
Specification : BOLT M10 X 45 (102-18) BOLT M10 X 1.5 X 45 (102-18) IS:1364-92 PT-1 P.8.8 GALVD & YELLOW PASSIVATED
C
Estab
26) SPLIT PIN 2 X25L IS 549
Description : SPLIT PIN 2 X25L IS 549()
Specification : SPLIT PIN 2.0X25L IS:549
C
Estab
Category : s
Grade : 3
Size :
S
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) Cr PLTD DE SPANNER 8X9
Description : Cr PLTD DE SPANNER 8X9()
Specification : CROME PLATED DE SPANNER 8X9 EVEREST/TAAPARIA/GEDORE/JHALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700111-V3.
S
Estab
2) Cr PLTD DE SPANNER 14X15
Description : Cr PLTD DE SPANNER 14X15()
Specification : CROME PLATED DE SPANNER 14X15 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700211-V4
S
Estab
3) NIC CROME PLATED RING SPA10X11
Description : NIC CROME PLATED RING SPA10X11()
Specification : CROME PLATED RING SPANNER 10X11 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/ BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.F4735500-V2
S
Estab
4) CROME PLATED DE SPANNER 25X28
Description : CROME PLATED DE SPANNER 25X28()
Specification : CROME PLATED DE SPANNER 25X28 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A -SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.X4700611-V4 DRG. NO. X4700211-V4
Specification : CROME PLATED SCREW DRIVER 8"(200mm 1.6X10 mm) EVEREST/TAAPAR IA/AMBIKA TOOLS/GEDORE/JHALANI/JK/JHALANI EXPERT/BETA/VENUS MAKE AS PER IS:844 (PART-II)MADE OF CHROME VANADIUM STEEL.
S
Estab
6) Cr PLTD DE SPANNER 12 X 13 mm
Description : Cr PLTD DE SPANNER 12 X 13 mm()
Specification : CROME PLATED DE SPANNER 12 X 13 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS:2028-A-SERIES-C MADE OF CROME VANADIUM STEEL.
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 10 MM EVEREST/TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/ VENUS/ JK/BETA MAKE AS PER IS:3082 MADE OF CROME VANADIUM STEEL.
S
Estab
9) Cr PLTD DE SPANNER 24X26
Description : Cr PLTD DE SPANNER 24X26()
Specification : CROME PLATED DE SPANNER 24X26 mm EVEREST/TAAPARIA/GEDORE/JHA LANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS:2028 -A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X 4700511-V3.
S
Estab
10) NIC CROME PLATED RING SPA18X19
Description : NIC CROME PLATED RING SPA18X19()
Specification : CROME PLATED RING SPANNER 18X19 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKAA/VENUS TOOLS MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. DRG.NO.X4704011-V2
S
Estab
11) CROME PLATED DE SPANNER 21X23
Description : CROME PLATED DE SPANNER 21X23()
Specification : CROME PLATED DE SPANNER 21X23mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS:2028- A-SERIES-C MADE OF CROME VANADIUM STEEL.
S
Estab
12) Cr PLTD DE SPANNER 16 X 17
Description : Cr PLTD DE SPANNER 16 X 17()
Specification : CROME PLATED DE SPANNER 16 X 17 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/MAKE AS PER IS 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4734911-V3.
S
Estab
13) NIC CROME PLATED RING SPA19X22
Description : NIC CROME PLATED RING SPA19X22()
Specification : CROME PLATED RING SPANNER 19X22 mm EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/J K/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4701011-V2.
S
Estab
14) CROME PLATED DE SPANNER 24X27
Description : CROME PLATED DE SPANNER 24X27()
Specification : CROME PLATED DE SPANNER 24X27mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE ACCEPTABL E AS PER IS-2028-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO- X4700411-V3.
S
Estab
15) NIC CROME PLATED RING SPA24X27
Description : NIC CROME PLATED RING SPA24X27()
Specification : CROME PLATED RING SPANNER 24X27 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER -IS:2029-1998-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO.X4701111-V2.
S
Estab
16) NIC CROME PLATED RING SPA14X15
Description : NIC CROME PLATED RING SPA14X15()
Specification : CROME PLATED RING SPANNER 14X15 MM EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700911-V2.
S
Estab
17) Cr PLTD DE SPANNER 19X22
Description : Cr PLTD DE SPANNER 19X22()
Specification : CROME PLATED DE SPANNER 19X22 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. X4700311-V4 DRG.NO. X4700211-V4.
Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 12MM EVER EST /TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/JK/ BETA/VENUS/ MAKE AS PER IS:3082-MADE OF CHROME VANADIUM STEEL. PART NO. X4700711-V2.
S
Estab
19) NIC CROME PLATED RING SPA16X17
Description : NIC CROME PLATED RING SPA16X17()
Specification : CROME PLATED RING SPANNER 16X17 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4735211 V2.
S
Estab
20) NIC CROME PLATED RING SPA12X13
Description : NIC CROME PLATED RING SPA12X13()
Specification : CROME PLATED RING SPANNER 12X13 MM EVEREST/TAAPARIA/GEDORE/J HALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700811-V2.
S
Estab
21) DE SPANNER SAE 5 by 8 inch X 9 by 16 inch
Description : DE SPANNER SAE 5 by 8 inch X 9 by 16 inch()
Specification : CHROME PLATED - DE SPANNER SAE 5/8" X 9/16" (A/F S1 - 0.629" / 0.633" X S2 - 0.566" / 0.570"), OVERALL LENGTH 150MM MIN. MAKE - EVEREST/TAPARIA/AMBIKA TOOLS/JHALANI EXPERT/JK/BETA /GEDORE/JHALANI/VENUS/ , MADE OF CHROME VANADIUM STEEL,OTH
S
Estab
22) CR PL SCREW DRIVER12 inch X 2 X 13
Description : CR PL SCREW DRIVER12 inch X 2 X 13()
Specification : CROME PLATED SCREW DRIVER 12"(300 mm)X2.0mm X13 mm EVEREST/T AAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/JHALANI EXPE RT/VENUS MAKE AS PER IS:844 (PART-II) MADE OF CHROME VANADIUM STEEL.
Specification : CROME PLATED SCREW DRIVER PHILIPS 100LG 6 DIA TIP NO-2 EVEREST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS/JHALANI/JK/BETA/ JHALANI EXPERT MAKE MADE OF CROME VANADIUM STEEL.
S
Estab
24) CR PL BALL PEIN HAMMER160Z by 500
Description : CR PL BALL PEIN HAMMER160Z by 500()
Specification : BALL PEIN HAMMER 160Z/500 GMS EVEREST/ TAAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/VENUS/ JHALANI EXPORT MAKE AS PER IS:841 MADE OF CHROME VANADIUM STEEL.PART NO.F4730200-V1.
S
Estab
25) BOLT M10 PART NO L1021009
Description : BOLT M10 PART NO L1021009()
Specification : BOLT M10 X 45 (102-18) BOLT M10 X 1.5 X 45 (102-18) IS:1364-92 PT-1 P.8.8 GALVD & YELLOW PASSIVATED
C
Estab
26) SPLIT PIN 2 X25L IS 549
Description : SPLIT PIN 2 X25L IS 549()
Specification : SPLIT PIN 2.0X25L IS:549
C
Estab
Category : s
Grade : 3
Size :
S
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) LPTA C PLATED SPANNER DEAC 8X10 TO Spanner 8x10
Description : LPTA C PLATED SPANNER DEAC 8X10 TO Spanner 8x10()
Specification : CHROME PLATED SPANNER DEAC 8X10 TO IS:2028,HARDNESS & TORQUE AS PER IS:6131(MAKE:- EVEREST/TAPARIA/GEDORE/JHALANI/JHALAN
I EXPERT/JK/BETA PRODUCT/AMBIKA OVERSEAS/VENUS ONLY). MADE FROM CHROME VANADIUM STEEL
C
Estab
2) LPTA NI CR PLATED SPANNER DEAC19X22
Description : LPTA NI CR PLATED SPANNER DEAC19X22()
Specification : NI CR.PLATED SPANNER DEAC19X22 TO IS:2028,HARDNESS & TORQUE AS PER IS:6131(MAKE:- EVEREST/TAPARIA/GEDORE/JHALANI/JHALANI/JHALANI EXPERT/JK/BETA PRODUCT/AMBIKA OVERSEAS/VENUS ONLY).MADE FROM CHROME VANADIUM STEEL
Specification : CHROME PLATED WHEEL SPANNER 27X30 TO IS:2030; HARDNESS & TOR QUE AS PER IS:6131 ALONGWITH TOMMY BAR(MAKE:- EVEREST/TAPARIA/GEDORE/JHALANI/JHALANI EXPERT/JK/BETA PRODUCT/AMBIKA OVERSEAS/VENUS ONLY). MADE FROM CHROME VANADIUM STEEL, dimensio
C
Estab
6) LPTA NI CR PLATED RING SPANNER24X27
Description : LPTA NI CR PLATED RING SPANNER24X27()
Specification : NI-CR.PLATED RING SPANNER 24X27 TO IS:2029 HARDNESS & TORQUE AS PER IS:6131(MAKE:- EVEREST/TAPARIA/GEDORE/JHALANI/JHALANI EXPERT/JK/BETA PRODUCT/AMBIKA OVERSEAS/VENUS ONLY). MADE FROM CHROME VANADIUM STEEL
C
Estab
7) LPTA NI CR PLATED ADJ WRENCH A300 T
Description : LPTA NI CR PLATED ADJ WRENCH A300 T()
8) LPTA C PLATED D E BOX SPNR SW17XSW1
Description : LPTA C PLATED D E BOX SPNR SW17XSW1()
Specification : CHROME PLATED DOUBLE ENDED BOX SPANNER SW17XSW19 TO IS:2030 HARDNESS & TORQUE AS PER IS:6131 ALONGWITH TOMMY BAR 12MM DIA TO IS:2062-TYPE'A'(MAKE:- EVEREST/TAPARIA/GEDORE/JHALANI/JHALANI EXPERT/JK/BETA PRODUCT/AMBIKA OVERSEAS/VENUS ONLY)
C
Estab
9) LPTA CR PLATD D E BX SPNR SW17XSW19
Description : LPTA CR PLATD D E BX SPNR SW17XSW19()
Specification : CHROME PLATED DOUBLE ENDED BOX SPANNER SW17XW19 WITHOUT TOMMY BAR (MAKE:-EVEREST/TAPARIA/GEDORE/JHALANI/JHALANI EXPERT/JK/BETA /AMBIKA OVERSEASE/VENUSY TO DRG.No. 2060 5810 9501 ISSUE V1
Specification : LOCK WASHER JZE-2.55 TO DRG.NO.TRD-1-2-2269.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SPRING WASHER TO DRG.NO.TRD-1-22267[99]()
Specification : SPRING WASHER TO DRG.NO.TRD-1-2-2267.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CONTAINER PLASTIC P 17D 23MM PPL LF 9911356890[99]()
Specification : PLASTIC CONTAINER P-17D (EMPTY ASSY) DRG NO. TRD-1676 b WITHONE NO EACH OF THE FOLLOWING PACKING FITMENTS:-(a) THERMOCOL DISC BOTTOM TO DRG NO KhFQ-110639 (b) THERMOCOL DISC TOP TO DRG NO KhFQ-110640 (c) POLYTHENE SLEEVE TO DRG NO. KhFQ-1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SET CONSISTING OF 3 RUBBER COMPONENTS LF 9911356367[99]()
Specification : SET CONSIST OF 3 COMPT. (1) GASKET TO DRG NO. 4-26941-014 DC NO 36761-A DT 1/6/01 (2) GASKET TO DRG.NO 4-26941-016 DC NO.36761A DT 1/6/01 (3) SEALING RING TO DRG NO 4-26941-009 DC NO 36761A DT 1/6/01 MATERIAL FOR ABOVE ITEM 1-3 SPCEN:IND/
C
Nonestab
2) BOWL FOR 76by62 MM SHELL LF 9911357252[99]()
Specification : BOWL FOR SHELL 76/62 SRGM AMMN. TO TO DRG. NO.TRD-1-2-1984. OR NASK 1108/.4/2/(P)
R
Nonestab
3) WASHER AS PER DRG NO MKTA 754152 003 LF 9911358670[99]()
Specification : WASHER AS PER DRG NO MKTA 754152 003 TRD 1 1 3223
C
Nonestab
4) WASHER AS PER DRG NO TRD 1 1 3223 LF 9911358675[99]()
Specification : WASHER AS PER DRG MKTA 754152 003 TRD 1 1 3223 ALT
C
Nonestab
5) WASHER AS PER DRG NO MKTA 754152 001 LF 9911358668[99]()
Specification : WASHER AS PER DRG NO MKTA 754152.001/TRD 1.1.3221
C
Nonestab
6) WAVE SPRING WASHER 2013999902[99]()
Specification : WAVE SPRING WASHER PART NO 6414691 TO OEM DRG NO 304069069/TRD DRG NO 2.2.2541
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) O RING 67 5 X 2 4 lf 2013436145[20]()
Specification : "O" RING 67.5 X 2.4 TO DRG NO F-1301-043760-D DC NO 36783-A DT 19/9/01 NEOPRENE RUBBER SPECN:-IND/ME/884:2015 COMPOUNDNO.C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO.5403-ME DATED- 01/02/2016.COMPATIBLE WITH RDX,TNT.TO SEPCN F-1301-907400DDATE
1) AUTO CABLE 1 SQ MM BROWN
Description : AUTO CABLE 1 SQ MM BROWN()
Specification : AUTO CABLE 1.00 SQ. MM. BROWN AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551
MAT- FINOLEX/V GUARD MAKE ONLY.
C
Estab
2) AUTO CABLE 1 SQ MM GREEN RED
Description : AUTO CABLE 1 SQ MM GREEN RED()
Specification : AUTO CABLE 1.00 SQ. MM. GREEN/RED AUTO CABLES CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1994 OR DIN72551
(MAT- FINOLEX/V GUARD MAKE ONLY.)
C
Estab
3) AUTO CABLE 1 SQ MM ORANGE GREEN
Description : AUTO CABLE 1 SQ MM ORANGE GREEN()
Specification : AUTO CABLE 1.00 SQ. MM. ORANGE/GREEN AUTO CABLES CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551
MAT- FINOLEX/V GUARD MAKE ONLY.
C
Estab
4) AUTO CABLE 1 SQ MM RED
Description : AUTO CABLE 1 SQ MM RED()
Specification : AUTO CABLE 1.00 SQ. MM. RED AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551 MAT- FINOLEX/V GUARD MAKE ONLY.
C
Estab
5) AUTO CABLE 1 SQ MM WHITE
Description : AUTO CABLE 1 SQ MM WHITE()
Specification : AUTO CABLE 1.0 SQ. MM. WHITE AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551 (MAT- FINOLEX/V GUARD MAKE ONLY.)
C
Estab
6) AUTO CABLE 1 SQ MM YELLOW RED
Description : AUTO CABLE 1 SQ MM YELLOW RED()
Specification : AUTO CABLE 1.00 SQ. MM. YELLOW/RED AUTO CABLES CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1994 OR DIN72551
(MAT- FINOLEX/V GUARD MAKE ONLY.)
C
Estab
7) AUTO CABLE 1 SQMM BROWN BLACK
Description : AUTO CABLE 1 SQMM BROWN BLACK()
Specification : AUTO CABLE 1.00 SQ. MM. BROWN/BLACK AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551 MAT- FINOLEX/V GUARD MAKE ONLY.
C
Estab
8) AUTO CABLE TWO AND HALF SQ MM BROWN
Description : AUTO CABLE TWO AND HALF SQ MM BROWN()
Specification : AUTO CABLE 2.5 SQ. MM. BROWN AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551
MAT- FINOLEX/V GUARD MAKE ONLY.
C
Estab
9) AUTO CABLE BLUE BLACK
Description : AUTO CABLE BLUE BLACK()
Specification : AUTO CABLE BLUE/BLACK 1.0 SQ. MM.AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605, 1994 OR DIN72551
(MAT- FINOLEX/V GUARD MAKE ONLY.)
C
Estab
10) AUTO CABLE BLUE RED
Description : AUTO CABLE BLUE RED()
Specification : AUTO CABLE BLUE/RED 1.0 SQ. MM.AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605, 1994 OR DIN72551
(MAT- FINOLEX/V GUARD MAKE ONLY.)
C
Estab
11) AUTO CABLE GREEN BLACK
Description : AUTO CABLE GREEN BLACK()
Specification : AUTO CABLE GREEN/BLACK 1.0 SQ. MM. FINOLEX AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1994 OR DIN72551 (MAT- FINOLEX/V GUARD MAKE ONLY.)
C
Estab
12) AUTO CABLE ORANGE WHITE
Description : AUTO CABLE ORANGE WHITE()
Specification : AUTO CABLE ORANGE/WHITE 1.0 SQ. MM.AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:006505,1994 OR DIN72551
(MAT- FINOLEX/V GUARD MAKE ONLY.)
C
Estab
13) AUTO CABLE ORANGE YELLOW
Description : AUTO CABLE ORANGE YELLOW()
Specification : AUTO CABLE ORANGE/YELLOW 1.0 SQ. MM.AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994 OR DIN72551
JASCO: FINOLEX/V GUARD MAKE ONLY
C
Estab
14) Fan
Description : Fan()
Specification : FAN 24V, DC, 150MM MINI CAR FAN (OSC) OR 24V, DC, COACH FAN TYPE CF-200 WITH BRACKET AS PER DRG NO. MPV/ELECT/116/MAKE-REMI/ TOCOS/ MESKO/ WINNER
C
Estab
15) Heavy Duty Cables
Description : Heavy Duty Cables()
Specification : HEAVY DUTY CABLES DRG. NO. OFPM 640-06-2050-1/E
Specification : "O" RING 67.5 X 2.4 TO DRG NO F-1301-043760-D DC NO 36783-A DT 19/9/01 NEOPRENE RUBBER SPECN:-IND/ME/884:2015 COMPOUNDNO.C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO.5403-ME DATED- 01/02/2016.COMPATIBLE WITH RDX,TNT.TO SEPCN F-1301-907400DDATE
1) Dunadhesive 758 dendrite PC 65
Description : Dunadhesive 758 dendrite PC 65()
Specification : POLYCHLOROPRENE BASE DUNLOP ADHESIVE S-758 OR DENDRITE PC- 65 CAPACITY ALSO TO JOINT RUBBER TO STEEL PACKED IN 5 LTR TIN AS PER TS-25408
P
Estab
2) synthetic adhesive make dunlop of grade S758 oblique fevicol SR998
Description : synthetic adhesive make dunlop of grade S758 oblique fevicol SR998()
Specification : synthetic adhesive make dunlop of grade S758 oblique fevicol SR998
P
Estab
3) SLOTTED CHEESE HEAD SCREW M5X35 LENGTH
Description : SLOTTED CHEESE HEAD SCREW M5X35 LENGTH()
Specification : SLOTTED CHEESE HEAD SCREW M5X35 LENGTH DRG.NO. S-1817, S-1819, S-1820 & S-1821 FOE ERA BOX (CONTAINER)
C
Estab
4) Spring Washer B 5 IS 3063
Description : Spring Washer B 5 IS 3063()
Specification : Spring Washer B 5 I.S. 3063
C
Estab
5) Snap Head Rivet 6X30 IS 2155
Description : Snap Head Rivet 6X30 IS 2155()
Specification : Snap Head Rivet 6X30 to IS: 2155
C
Estab
Category : s
Grade : 3
Size :
S
1Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) Wire rope slings- mechanically & hand spliced with diff. end fittings viz:hooks,rings,sockets etc.
Description : Wire rope slings- mechanically & hand spliced with diff. end fittings viz:hooks,rings,sockets etc.()
3) Many of tools & Dies Fixtures
Description : Many of tools & Dies Fixtures()
Specification : As per GCF Spcn./Drg./Size & requirements
S
Estab
Category : s
Grade : 3
Size :
O
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) PLAIN NUT M5 IS1364 PART III P 8 GALVD AND YELLOW PASSIVATED L3010518
Description : PLAIN NUT M5 IS1364 PART III P 8 GALVD AND YELLOW PASSIVATED L3010518()
Specification : POLYCHLOROPRENE BASE DUNLOP ADHESIVE S-758 OR DENDRITE PC-65 CAPACITY ALSO TO JOINT RUBBER TO STEEL PACKED IN 5 LTR TIN. AS PER TS- 25408
1) Dunadhesive 758 dendrite PC 65
Description : Dunadhesive 758 dendrite PC 65()
Specification : POLYCHLOROPRENE BASE DUNLOP ADHESIVE S-758 OR DENDRITE PC- 65 CAPACITY ALSO TO JOINT RUBBER TO STEEL PACKED IN 5 LTR TIN AS PER TS-25408
P
Estab
2) TOGGLE SWITCH SINGLE POLE
Description : TOGGLE SWITCH SINGLE POLE()
Specification : TOGGLE SWITCH SINGLE POLE DOUBLE THROW, 250 V, 10 AMP, MAKE- UNIQUE/GE
C
Estab
3) synthetic adhesive make dunlop of grade S758 oblique fevicol SR998
Description : synthetic adhesive make dunlop of grade S758 oblique fevicol SR998()
Specification : synthetic adhesive make dunlop of grade S758 oblique fevicol SR998
