List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
3341 K E ALLOYS
3/244 VISHNU PURI KANPUR U.P.
PIN1 : 208002
Phone No. : 9839029155
GSTIN : 09AAHCS9963Q1Z4 		KNPK01383E

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL STRIP 1 MM X 95 MM Description : STEEL STRIP 1 MM X 95 MM() Specification : STEEL STRIP 1.0MM X 95.0MM TO SPECN.STEEL BS 1449 PT-1:1983 CS-30. ANNEALED CONDITION. ALTERNATIVE MATERIAL TO SOECN.BS 1449 PT-1:1983 SEC 4 CONDITION ,A,MATERIAL GD C-S-40 WITH%C RESTRICTED TO 0.4% (MAXIMUM).(COVER) R Estab
Category : s
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SM SHEET CR Description : SM SHEET CR() Specification : SM SHEET CR 1.25X1250X2500MM BS:1449:PT.1:1983 CR-3 SEC.2 OR IS:513:1994 REQD.FOR STOP D S CAT NO 1005-000975 9MM MAGZINE CARBINE 1A1/CARBURIZING BOX. R Estab
Category : s
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Steel Strip 3 18mm X 70mm X 1200mm Description : Steel Strip 3 18mm X 70mm X 1200mm() Specification : STEEL STRIP 3.18MM X 70MM X 1200MM FREE CUTTING STEEL IS:4431-1978 GR 14 C14 S14 FOR BRACKET DRG.NO.CQA(I)393/37 FOR CI(A) KIRKEE (IFD). C Estab
Category : s
Grade : 3
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) STAINLESS STEEL PLATE 316 PER ASTM A 240 PLATE SIZE 56 TX 90L X 110 W IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG[03]() Specification : STAINLESS STEEL PLATE 316 PER ASTM A 240. PLATE SIZE 56 TX 90L X 110W (IN MM) ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG R Nonestab
2) ALLOY STEEL PLATE THICK 12MM SAE 4130 PER SAE AMS 6345 PLATE SIZE 12T X 90L X 80W IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG[02]() Specification : ALLOY STEEL PLATE THICK 12MM SAE 4130 PER SAE-AMS-6345. PLATE SIZE: 12T X 90L X 80W (IN MM). ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED.FOR SRCG. R Nonestab
3) Copper Alloy Bar C90700 Tin branze alloy per SAE 65 or ASTM B505 size dia 28 mm All relevant chemical and mechanical test certificate from NABL accredited LAB to be submitted[07]() Specification : Copper Alloy Bar C90700 (Tin branze alloy) per SAE 65 or ASTM B505 size dia 28 mm. All relevant chemical and mechanical test certificate from NABL accredited LAB to be submitted. R Nonestab
4) STEEL ALLOY BAR SAE 4130 PER SAE AMS S 6758 OR SAE 4340 PER SAE AMS S 5000 ROD DIA 90X154L IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED for SRCG[02]() Specification : STEEL ALLOY BAR SAE 4130 PER SAE-AMS-S-6758 OR SAE 4340 PER SAE-AMS-S-5000. ROD DIA 90X154L IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED. for SRCG R Nonestab
5) ALLOY STEEL PLATE THICK 16 MM SAE 4130 PER SAE AMS 6345 PLATE SIZE 16T X 90L X80W IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG[02]() Specification : FOR ALLOYSTEELPLATETHICK16MMSAE4130PERSAE-AMS-6345. PLATE SIZE: 16T X 90L X80W (IN MM). ALLRELEVANTTESTCERTIFICATEFROMNABLLABTO BE SUBMITTED.FORSRCG R Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION[07]() Specification : BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION. R Estab
Category :
Grade : Grade III
Size : S
1Field Gun Factory Kanpur

Name Specification Use Status
1) PHOSPHOR BRONZE SIZE 45MM SQUARE X1350 IN MULTIPLE LENGTH SPECN IS 7811 OF 1993[07]() Specification : PHOSPHOR BRONZE SIZE 45MM SQUARE X1350 IN MULTIPLE LENGTH SPECN IS 7811 OF 1993 R Estab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) SQUARE DRAWN 1 upon 4 Inch ROD FOR FIRING DEVICE[01]() Specification : SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H R Nonestab
2) STEEL STRIP FOR FIRING DEVICE[01]() Specification : STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD) R Nonestab
3) SS WIRE ROD DIA 10MM[01]() Specification : SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10 R Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SQUARE DRAWN ROD FOR FIRING DEVICE Description : SQUARE DRAWN ROD FOR FIRING DEVICE() Specification : SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H R Estab
2) STEEL SQR 37MM FOR MAG Description : STEEL SQR 37MM FOR MAG() Specification : SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION R Estab
3) STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19 Description : STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19() Specification : STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19 R Estab
Category : s
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE). Description : ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).() Specification : SPECIFICATION IS:513-(LATEST ISSUE). R Estab
Category : s
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE). Description : ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).() Specification : SPECIFICATION IS:513-(LATEST ISSUE). R Estab
2) STEEL RD 8MM DIA FOR MAG Description : STEEL RD 8MM DIA FOR MAG() Specification : BS 970 PT 1:1983 GR 431 S-29 OR 20 S-37 EN 56C R Estab
3) ST STRIP Description : ST STRIP() Specification : ST.STRIP SIZE:- 1.8MM THICK X270MM WIDE X1600MM LONG TO SPECN. IS:7226-1974 GRADE C-40, COLD ROLLED & ANNEALED CONDN. NOTE:- GRAIN DIRECTION SHOULD BE ALONG THE LENGTH. R Estab
4) ST STRIP FOR LMG Description : ST STRIP FOR LMG() Specification : ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT). R Estab
5) ST STRIP MM FOR REVOLVER Description : ST STRIP MM FOR REVOLVER() Specification : ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT). R Estab
6) STEEL ROUND 27 MM Description : STEEL ROUND 27 MM() Specification : STEEL ROUND 27 MM TO SPECN.IS:5517-1993 DEGIGNATION 55C8 IN ANNEALED & COLD DRAWN CONDN. (FOR SLEEVE LOCKING BIPOD). R Estab
7) SQUARE DRAWN ROD FOR FIRING DEVICE Description : SQUARE DRAWN ROD FOR FIRING DEVICE() Specification : SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H R Estab
8) STEEL STRIP 3.5MM THICK X140MM WIDE TO SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25. STRAIGHTENED & IN STD. CUT LENGTH Description : STEEL STRIP 3.5MM THICK X140MM WIDE TO SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25. STRAIGHTENED & IN STD. CUT LENGTH() Specification : SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25. R Estab
9) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION R Estab
10) STEEL SQR 37MM FOR MAG Description : STEEL SQR 37MM FOR MAG() Specification : SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION R Estab
11) STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE Description : STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE() Specification : SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE R Estab
12) SPG STEEL WIRE 1.216 MM (18SWG) Description : SPG STEEL WIRE 1.216 MM (18SWG)() Specification : SPRING STEEL WIRE 18 SWG (0.048") DIA TO SPECIFICATION BS:5216-1991 GD ND-3 REQUIRED FOR SPRING MAIN OF 9MM CARBINE R Estab
13) STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION Description : STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION() Specification : STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970:PT.1:SEC-2-1983 GD 080M40 TEST PIECE TO BE TESTED AS PER SPECIFIC.MATERIAL SHOULD ALSO SATISFY THE TEST AS LAID DOWN IN THE ANNEXURE. R Estab
14) STEEL ROUND 18MM DIA FOR MAG Description : STEEL ROUND 18MM DIA FOR MAG() Specification : SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36 R Estab
15) ST.RD.38MM DIA IN HOTROLLED & ANNEALED COND.TO SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE Description : ST.RD.38MM DIA IN HOTROLLED & ANNEALED COND.TO SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE() Specification : SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE R Estab
16) STEEL FLAT 22X18MM FOR MAG Description : STEEL FLAT 22X18MM FOR MAG() Specification : SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2 (REQD.FOR LINK PISTON EXTN.OF MAG 7.62MM) R Estab
17) STEEL ROUND 12MM DIA Description : STEEL ROUND 12MM DIA() Specification : STEEL ROUND 12MM.DIA TO SPECN.BS:970.PT:1.1983.GD 835-M-15 OR GD-655 M-13.(EN-39B OR 36B) REQUIRED FOR EXTRACTOR SMALL ARMS CARTRIDGE TO DRG NO.ARDE/SK-2689/250. R Estab
18) STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19 Description : STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19() Specification : STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19 R Estab
Category : s
Grade : 3
Size : S
1Small Arms Factory

Name Specification Use Status
1) ST FLAT 70X34MM IN HOT ROLLED and ANNEALED CONDITION[01]() Specification : ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NAT R Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) ST FLAT 70X34MM IN HOT ROLLED and ANNEALED CONDITION[01]() Specification : ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NAT R Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STEEL FLAT 125X 8X 530 MM LONG IN CUT LENGTH[01]() Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM. R Nonestab
2) STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650 C[03]() Specification : STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907) R Nonestab
3) STEEL FL 50X25MM[04]() Specification : STEEL FL.50X25MM TO IS:5517-1993 GD-40 NI6CR4MO3. R Nonestab
4) STEEL FLAT 36 MM X 62 MM[04]() Specification : STEEL FLAT 36 MM X 62 MM BS: 970 PT-1 1983 GD. 835 M 15 OR EN- 39-B R Nonestab
5) Steel Round Dia 28mm[14]() Specification : STEEL ROUND DIA 28MM SPEC. BS 970 PT-1: 1983-GR-070 M 20 R Nonestab
6) STEEL SHEET POINT 9MM 20SWG X 1000 X 1500MM FOR STIRKER MECHANISM[01]() Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM, STEEL IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449 PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD 7606/2. R Nonestab
7) STEEL FLAT RECTANGULAR SIZE 40 plus 5 MM X 65 plus 5 MM for TAR[01]() Specification : STEEL FLAT RECTANGULAR SIZE (40+5)MMX(65+5)MM IN THE LENGTH OF 1.5 TO 3MTR TO SPECN. BS:970 PT1 1983,GR 817 M40 HOT ROLLED AND NORMALISED CONDITION.TEST PIECE HARDNESS TO ACHIEVE 425-475 HV. R Nonestab
8) STEEL FLAT SIZE 6 X 22 MM IN HOT ROLLED AND NORMALISED CONDN FOR MAG[01]() Specification : STEEL FLAT SIZE:- 6 X 22MM IN HOT ROLLED & NORMALISED CONDN.TO SPECIFICATION BS:970:PT.3:1991:GR.070M55 MATERIAL TO BE TESTED IN HARDENED & TEMPERED CONDITION AS PER RULING SECTION & SEPERATE TEST PIECE NEED TO BE HEAT TREATED TO ACHIEVE R Nonestab
9) STEEL FLAT 45X50 070M55 OR EN9 FOR MAG[01]() Specification : STEEL FLAT TO SPECIFICATION IS:5517-1993 DESIGNATION 55C8 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION R Nonestab
10) STEEL ROD 30MM DIA[01]() Specification : Steel Rod 30mm dia. To Specn. IS:5517:1993 Designation 55CB. R Nonestab
11) STEEL ROUND DIA 25MM[01]() Specification : STEEL ROUND DIA 25MM TO AS PER SPEC. IS:4431-1978 DESIGNATION 11C10S25 R Nonestab
12) STEEL FLAT SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION[01]() Specification : STEEL FLAT TO SPECIFICATION IS:5517-1993 DESIGNATION 55C8 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION R Nonestab
13) STEEL SQUARE 22MM HOT ROLLED AND NORMALISED CONDITION TO SPECN BS 970 PT3 1991 GD070M55[01]() Specification : STEEL SQR. 22MM (7/8”) HOT ROLLED & NORMALISED CONDITION TO SPECN :BS:970 :PT-3 :1991 GD.070M55 R Nonestab
14) Steel Flat 75x40mm[01]() Specification : ST. FLAT 75(+/-5.0)MM X 40(+/-2.0)MM TO SPECN IS:6603-2001, DESIGNATION X12CR12 OR X20CR13. MACRO ETCH TEST & NMIR TEST (FOR MODERATELY/NON-STRESSED(II)) AS PER ANX. ‘A’ NATURE ‘C’ R Nonestab
15) STEEL RD 25MM DIA[03]() Specification : STEEL RD 25MM DIA SPECN.IS:6603-2001,DESIG-X15CR16 NI2 HARDENED & TEMPERED BARS TO HARDNESS 265-300 BHN.MACRO ETCH & NMIR TEST(II) TO BE CARRIED OUT AS PER ANNEXURE NATURE `C' (REQUIRED FOR GAS REGULATOR D S CAT NO. 1005-006614) R Nonestab
16) STEEL ROUND 18MM DIA[01]() Specification : STEEL ROUND 18MM DIA TO SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36 MACRO ETCH AND NMIR TEST (MODERATELY STRESSED/NON STRESSED COMPONENTS)AS PER ANNEXURE "A" NATURE-C R Nonestab
Category :
Grade : Grade III
Size : S
3342 KAILASH ENTERPRISES
NEAR MARIMATA MANDIR KAILASH ENTERPRISES BHUSAWAL NEAR MARIMATA MANDIR BHUSAWAL Maharashtra
PIN1 : 425201
Phone No. : 9422276199
GSTIN : 27AAHPC7544G1ZR 		AAHPC7544G

Download 		1Ordnance Factory Bhusawal

Name Specification Use Status
1) ARC WELDING ELECTRODE[99]() Specification : ARC WELDING ELECTRODE - ER 4211X AS PER IS:814-2004 AWS/A5.1 E-6013 CURRENT CONDITION, IS CLASSIFICATION IS:814:2004 WITH CURRRENT CONDITION USE AS AC50 OR DC +/-AMP DIA :-3.15 (+/- 0.05)MM,LENGHT :-450.0(+/- 6.0)MM WITH MEDIUM COATING UP P Estab
Category : s
Grade : Grade III
Size : S
1Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) RIVET MS FLAT 4 X 10 MM Description : RIVET MS FLAT 4 X 10 MM() Specification : RIVET MS FLAT 4 X 10 MM C Estab
2) RIVET MS FLAT HD 5 X 12 MM Description : RIVET MS FLAT HD 5 X 12 MM() Specification : RIVET MS FLAT HD 5 X 12 MM C Estab
3) S.M. FLAT 5 X 25 MM TO IS-1079-94 Description : S.M. FLAT 5 X 25 MM TO IS-1079-94() Specification : S.M. FLAT 5 X 25 MM TO IS-1079-94 C Estab
4) SOLDERING WORK OF STD CASSETTE Description : SOLDERING WORK OF STD CASSETTE() Specification : SOLDERING WORK OF STD CASSETTE P Estab
5) WEBBING COTTON O.G.2.5MM THICK Description : WEBBING COTTON O.G.2.5MM THICK() Specification : WEBBING COTTON BAND 2.5 MM +/- 0.25 MM THICK X 25.4 MM +/- 1.3 MM WIDTH DYED OLIVE GREEN (ISC-220 OF IS-5-1994 AMMENDMENT NO.1 FOURTH REVISION) SUITABLE MOULD PROOFED TO SPECN :"JSS-8305-18-1993" "DC NO.3176-ME DATED 12.08.1994" NOTE :- T P Estab
6) WEBBING COTTON SIZE 3.00X25MM. Description : WEBBING COTTON SIZE 3.00X25MM.() Specification : WEBBING COTTON BAND 3.00 MM THICK X 25 MM WIDTH SUITABLE MOULD PROOFED DYED OLIVE GREEN ( ISC-220 OF IS-5-78 ) TO SPECN: JSS-8305-18-93 DC NO.3176 ME DATED 12TH AUGUST 94. NOTE:-TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LABORATORIES FOR R Estab
7) ALL TYPES OF FABRICATION WORK FOR AMMN. BOXES Description : ALL TYPES OF FABRICATION WORK FOR AMMN. BOXES() Specification : AS PER DRG./SPECIFICATION R Estab
8) ASSISTANCE OF LABOURS FOR PROD SECTION Description : ASSISTANCE OF LABOURS FOR PROD SECTION() Specification : ASSISTANCE OF LABOURS FOR PROD SECTION AS PER ANNEXURE P Estab
9) FABRICATION OF BOX SM171L Description : FABRICATION OF BOX SM171L() Specification : FABRICATION OF BOX SM-171-L. P Estab
10) FABRICATION OF MOD601SM 105 Description : FABRICATION OF MOD601SM 105() Specification : FABRICATION OF MOD.601/SM 105 P Estab
11) FABRICATION SERVICES BOX C43A Description : FABRICATION SERVICES BOX C43A() Specification : FABRICATION SERVICES BOX C-43A P Estab
12) PAINTING VARNISHING OF D4C Description : PAINTING VARNISHING OF D4C() Specification : PAINTING & VARNISHING OF D4C P Estab
13) PAINTING SERVICES OF CYL533 Description : PAINTING SERVICES OF CYL533() Specification : PAINTING SERVICES OF CYL-533 P Estab
14) PHOSPHATING PAINTING BOX C51 Description : PHOSPHATING PAINTING BOX C51() Specification : PHOSPHATING &PAINTING BOX C-51 P Estab
15) PROCOF POWDR COATED BOX SM105 Description : PROCOF POWDR COATED BOX SM105() Specification : PROC.OF POWDR COATED BOX SM105 P Estab
16) PROCESSING ALONGWITH WELD TRA Description : PROCESSING ALONGWITH WELD TRA() Specification : PROCESSING ALONGWITH WELD. TRA P Estab
17) PROCESSING FABRICATION SM642 Description : PROCESSING FABRICATION SM642() Specification : PROCESSING FABRICATION SM-642 P Estab
18) PROCESSING FOR AMMNBOX SM51 Description : PROCESSING FOR AMMNBOX SM51() Specification : PROCESSING FOR AMMN.BOX SM-51 P Estab
19) PROCESSING FOR BOX SM 642 D Description : PROCESSING FOR BOX SM 642 D() Specification : PROCESSING FOR BOX SM-642-D P Estab
20) PROCESSING OF CYLINDER 12A Description : PROCESSING OF CYLINDER 12A() Specification : PROCESSING OF CYLINDER 12A P Estab
21) PROCESSING OF AMMN CONT BOX 43 Description : PROCESSING OF AMMN CONT BOX 43() Specification : PROCESSING OF AMMN.CONT.BOXC43 P Estab
22) PROCESSING OF BOX 601 MODIFIED Description : PROCESSING OF BOX 601 MODIFIED() Specification : PROCESSING OF BOX 601 MODIFIED P Estab
23) PROCESSING OF BOX C 43A AT PCP Description : PROCESSING OF BOX C 43A AT PCP() Specification : PROCESSING OF BOX C-43A AT PCP P Estab
24) PROCESSING OF CARRIER 13A Description : PROCESSING OF CARRIER 13A() Specification : PROCESSING OF CARRIER 13A P Estab
25) PROCESSING OF CARRIER 6A Description : PROCESSING OF CARRIER 6A() Specification : PROCESSING OF CARRIER 6A P Estab
26) PROCESSING OF CARRIER 7A Description : PROCESSING OF CARRIER 7A() Specification : PROCESSING OF CARRIER 7A P Estab
27) PROCESSING OF PHOS PAINTING 53 Description : PROCESSING OF PHOS PAINTING 53() Specification : PROCESSING OF PHOS.PAINTING 53 P Estab
28) PURCHASE OF CO2 GAS CYLINDER Description : PURCHASE OF CO2 GAS CYLINDER() Specification : PURCHASE OF CO2 GAS CYLINDER P Estab
29) RIVETING OF ASSLY CARRIER 13A Description : RIVETING OF ASSLY CARRIER 13A() Specification : RIVETING OF ASSLY. CARRIER 13A P Estab
30) RIVETING OF CARRIER 13A Description : RIVETING OF CARRIER 13A() Specification : RIVETING OF CARRIER 13A P Estab
31) SERVICES FOR AMMNCONT SM 601 Description : SERVICES FOR AMMNCONT SM 601() Specification : SERVICES FOR AMMN.CONT SM-601 P Estab
32) SERVICES FOR AMMN CONT BOX 651 Description : SERVICES FOR AMMN CONT BOX 651() Specification : SERVICES FOR AMMN.CONT.BOX 651 P Estab
33) SERVICES FOR BOX H2A NEW Description : SERVICES FOR BOX H2A NEW() Specification : SERVICES FOR BOX H2A (NEW) P Estab
34) SOLDERING PAINTING SERVICES Description : SOLDERING PAINTING SERVICES() Specification : SOLDERING & PAINTING SERVICES P Estab
35) SOLDERING SERVICES FOR CYL 533 Description : SOLDERING SERVICES FOR CYL 533() Specification : SOLDERING SERVICES FOR CYL-533 P Estab
36) UPKEEP MAINTENANCE OF ETP Description : UPKEEP MAINTENANCE OF ETP() Specification : UPKEEP & MAINTENANCE OF ETP P Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) 9911844035 WOOD PACKING 215 X178X 25MM Description : 9911844035 WOOD PACKING 215 X178X 25MM() Specification : AS PER SPECIFICATION C Estab
Category : p
Grade : 3
Size : S
3343 ALLWELD ENGINEERS PRIVATE LIMITED
B312, 7TH MAIN, NEAR 14TH CROSS BUS STAND, 2ND STAGE 2nd Stage, Peenya Industrial Area BANGALORE Karnataka
PIN1 : 560058
Phone No. : 9845118139 		AABCA9377Q

Download 		1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) PNEUMATIC BELT FEED BOOSTER AK 630M ASSY 02 Description : PNEUMATIC BELT FEED BOOSTER AK 630M ASSY 02() Specification : PNEUMATIC BELT FEED BOOSTER AK-630M ASSY 02 C Estab
Category : ddp
Grade : 3
Size : S
1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) HOIST TO DRG. NO. AK-630-YU SB1 SB Description : HOIST TO DRG. NO. AK-630-YU SB1 SB() Specification : HOIST TO DRG. NO. AK-630-YU SB1 SB C Estab
Category : ddp
Grade : 3
Size : S
3344 S. S. M. BROTHERS LIMITED
POST BOX NO. 8 11-D, GANDHIPURAM MAIN ROAD KOMARAPALAYAM TN
PIN1 : 638183
Phone No. : 04288-260811 		CHES18675G

Download 		1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Tape Cotton UNPROOFED 6MM Description : Tape Cotton UNPROOFED 6MM() Specification : TAPE COTTON WHITE UNPROOFED FOR AMMUNITION PURPOSES 6 MM PLUS OR MINUS 1.5 MM WIDE CONFORMING TO SPECIFICATION IND/ME/888(PROV) DC 3754-ME DT.12/12/02. R Estab
2) CLOTH COTTON DOWN TIGHT WHITE FOR M4A2 &CH 9 Description : CLOTH COTTON DOWN TIGHT WHITE FOR M4A2 &CH 9() Specification : WHITE COLOURED CLOTH COTTON DOWN TIGHT TO SPECN. IND/ME/1005 (OCT.2012), DC 5105-ME DT.27-04-2013, WIDTH:1400 MM. R Estab
3) CIRCULAR PLAITED SHOE LACE FOR CHARGE-9 Description : CIRCULAR PLAITED SHOE LACE FOR CHARGE-9() Specification : CIRCULAR PLAITED SHOE LACE FOR CHARGE-9 AS PER DRG. NO. CI(A) 6355595 AND CQA(A) 6391044. R Estab
4) TAPE COTTON RED FAST COLOUR Description : TAPE COTTON RED FAST COLOUR() Specification : TAPE COTTON RED FAST COLOUR, 13-1.5 MM WIDE, WEAVE PLAIN FOR TWILL, TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%, BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N. AS PER IS:3255-19 R Estab
5) SURGICAL HAND GLOVES S-7 1/2" Description : SURGICAL HAND GLOVES S-7 1/2"() Specification : SURGICAL HAND GLOVES S-7 1/2" (SEVEN AND HALF) ISI MARKED, NO. IS-4148 (DIALOMATIC) R Estab
Category : p
Grade : 2
Size : S
3345 CIRCLIPS INDIA PVT.LTD
O-5 & 6, STAR TRADE CENTRE SODAWALA LANE, BORIVALI MUMBAI MAHARASHTRA
PIN1 : 400092
Phone No. : 9819189690 		MUMC11570G

Download 		1Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) Circlip Description : Circlip() Specification : TO DRG. NO 3305-33 C Estab
2) Ring Description : Ring() Specification : 20-05-152-2 C Estab
3) Locking Ring Description : Locking Ring() Specification : 20-01-134 C Estab
Category : ddp
Grade : 1
Size : M
3346 GOON ENTERPRISES
B-811, PANKI, KANPUR UTTAR PRADESH
PIN1 : 208020
Phone No. : 9935448299 		AIIPG6334M

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R Description : CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R() Specification : CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R NOTE:CORD NYLON SIZE 1.6MMX2MTR WITH QUALITY PLATED HOOK OF MATCHING COLOUR- BLACK/BROWN/BURGANDI E Estab
2) USER MANUAL OF REVOLVER Description : USER MANUAL OF REVOLVER() Specification : USER'S MANUAL FOR REVOLVER 32(7.65MM)(MODIFIED) INHINDI & ENGLISH (BILINGUAL) IN BOOKLET FORM WITH ENVELOP, E Estab
3) CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE Description : CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE() Specification : CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE E Estab
Category : s
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) CLIP COVER FOR REVOLVER DRG NO SK 5573 R Description : CLIP COVER FOR REVOLVER DRG NO SK 5573 R() Specification : CLIP COVER FOR REVOLVER, DRG. NO. SK- 5573R NOTE: REVOLVER CLIP COVER OF BUFF BURNISH (HARDNESS LEATHER) DRUM DYED AS PER IS:580 COLOUR:BLACK/BROWN/BURGANDI C Estab
2) CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R Description : CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R() Specification : CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R NOTE:CORD NYLON SIZE 1.6MMX2MTR WITH QUALITY PLATED HOOK OF MATCHING COLOUR- BLACK/BROWN/BURGANDI C Estab
3) USER MANUAL OF REVOLVER Description : USER MANUAL OF REVOLVER() Specification : USER'S MANUAL FOR REVOLVER 32(7.65MM)(MODIFIED) INHINDI & ENGLISH (BILINGUAL) IN BOOKLET FORM WITH ENVELOP, C Estab
4) CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE Description : CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE() Specification : CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE C Estab
Category : p
Grade : 3
Size : S
3347 Nexgen Fluoropolymers Pvt Ltd
E-202, EPIP, Neemrana Industrial Area, District Alwar, Rajasthan Industrial Area, Neemrana Rajasthan
PIN1 : 301705
Phone No. : 01143057430 		AADCN3119

Download 		1Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6432300004 TEFLON SHT Description : 6432300004 TEFLON SHT() Specification : HEMRL /ED/PS/286 C Estab
2) 6432300005 TEFLON SHT Description : 6432300005 TEFLON SHT() Specification : HEMRL/PS/286 C Estab
3) 6432300006 TEFLON SHT Description : 6432300006 TEFLON SHT() Specification : HEMRL/PS/286 C Estab
4) 6432300007 TEFLON SHT FILM Description : 6432300007 TEFLON SHT FILM() Specification : HEMRL/PS/286. C Estab
Category : p
Grade : 3
Size : S
3348 BHILAI ENGINEERING CORPORATION LIMITED
HATHKHOJ VILLAGE INDUSTRIAL AREA 490026 BHILAI CHHATTISGARH HATHKHOJ VILLAGE INDUSTRIAL AREA BHILAI Chhattisgarh
PIN1 : 490026
Phone No. : 4088264
GSTIN : 22AAACB9272A9ZZ 		130400181S

Download 		1Heavy Vehicle Factory

Name Specification Use Status
1) FOUR TYPES OF CASTING[02]() Specification : STEEL, SPECIAL STEEL, ALUMINIUM ALLOY. GREY CAST IRON & INVESTMENT CASTINGS R Nonestab
Category : p
Grade : Grade II
Size : L
3349 MD. KHALIL MD. BASHIR
105/591, HALEEM MUSLIM COLLEGE ROAD, KANPUR UTTAR PRADESH
PIN1 : 208003
Phone No. : 9415044558 		AADFM6242K

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Wooden Chest for LMG Description : Wooden Chest for LMG() Specification : WOODEN CHEST FOR LMG 5.56MM (DP).TO DRG NO-SK-5026. E Estab
2) CHEST FOR 9 MM CARBINE Description : CHEST FOR 9 MM CARBINE() Specification : AS PER DRAWING DS CAT NO 1005-00966 DC (I) NO 25859 SA DT 10.09.03 E Estab
3) WOODEN CHEST MG2B FOR MAG Description : WOODEN CHEST MG2B FOR MAG() Specification : DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001 E Estab
Category : p
Grade : 3
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BOX W 123 MK2 DESIGNER'S REF IA 882() Specification : IA 948 (a,k) DC 36868-A. R Estab
2) CASES WOOD PACKING 7A/L CIA/AMN/570() Specification : IA 948 R Estab
3) BOX M20C(WOOD) TO DRG PT.NO.ISV 546() Specification : DRG.NO. CQA(A)/AMN/ST/365 R Estab
4) CASE WOOD PACKING NO.55,KF/1066() Specification : DRG.NO.KF/1066 R Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) WOODEN FITTING FOR LMG 5.56 MM Description : WOODEN FITTING FOR LMG 5.56 MM() Specification : AS PER DRAWING E Estab
2) CHEST RIFLE 5 56MM WOODEN CAPACITY 10 RIFLES WITH ACCESSORIES Description : CHEST RIFLE 5 56MM WOODEN CAPACITY 10 RIFLES WITH ACCESSORIES() Specification : CHEST RIFLE 5.56MM WOODEN CAPACITY 10 RIFLES WITH ACCESSORIES TO DRG NO CQA(SA)SK-625 D.S.CAT NO.1005-560403 SHT NO. 1&2 DC(I) NO-26483 SA DT 11-01-10 FOR SHT-1 DC(I) NO-26526 SA DT 22-07-10 FOR SHT-2 E Estab
3) TIMBER SOFTWOOD CONIFEROUS PLANKS , BATTENS , SCANTLINGS OF ALL GRADES Description : TIMBER SOFTWOOD CONIFEROUS PLANKS , BATTENS , SCANTLINGS OF ALL GRADES() Specification : IS:190-1991 , IS:5247 pt-I&II R Estab
Category : p
Grade : 3
Size : S
1Ordnance Equipment Factory

[ENR Registration]
Name Specification Use Status
1) WOODEN CRATE/CRATE WOOD PACKING VARIOUS Description : WOODEN CRATE/CRATE WOOD PACKING VARIOUS() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
2) TIMBER SOFTWOOD CONIFEROUS CHIR FIR PLANK GR I SIZE 35 MM X 200 MM Description : TIMBER SOFTWOOD CONIFEROUS CHIR FIR PLANK GR I SIZE 35 MM X 200 MM() Specification : AS PER REQUIREMENT AND SPECIFICATION R Estab
3) TIMBER CHIR ,KHASIPINE OR KAIL PLANK GR-1SIZE 55 MM X 110 MM X 3.00 MTR. Description : TIMBER CHIR ,KHASIPINE OR KAIL PLANK GR-1SIZE 55 MM X 110 MM X 3.00 MTR.() Specification : AS PER REQUIREMENT AND SPECIFICATION R Estab
4) TIMBER HARDWOOD NON CONIFEROUS PLANK GR 1 SISOO BIJASAL SAL 38 MM X 178 MM X 1 52 MTR Description : TIMBER HARDWOOD NON CONIFEROUS PLANT GR 1 SISOO BIJASAL SAL 38 MM X 178 MM X 1 52 MTR() Specification : AS PER REQUIREMENT AND SPECIFICATION R Estab
5) TIMBER BEJASAL FOR BEACON BANDEROL SET ARTY B (FOR DEMI BANDEROL STAFF WOOD). SIZE-40 MM SQUARE X 1300 MM LONG Description : TIMBER BEJASAL FOR BEACON BANDEROL SET ARTY B (FOR DEMI BANDEROL STAFF WOOD). SIZE-40 MM SQUARE X 1300 MM LONG() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category : p
Grade : 3
Size : S
3350 SRI VINAY PRECISON TECHNICS,,
PLOT NO.786, VIVEKANANDA NAGAR COLONY, KUKATPALLY, MEDAK MEDAK A.P.
PIN1 : 500072
Phone No. : 040-23073824 		AAOFS6769E

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BLANK FOR BODY COVER FOR MAG 7 62MM Description : BLANK FOR BODY COVER FOR MAG 7 62MM() Specification : BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G C Estab
2) BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN* Description : BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN*() Specification : BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN* C Estab
3) FRAME TRIGGER for MAG Description : FRAME TRIGGER for MAG() Specification : FRAME TRIGGER DS CAT NO.1005 - 006602 DC(I)NO.25317-SA DT.03.04.2002 IN FINISHED CONDITION W/O ANODISING. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BLANK FOR BODY COVER FOR MAG 7 62MM Description : BLANK FOR BODY COVER FOR MAG 7 62MM() Specification : BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G C Estab
2) Blank for Body Cover Drg. No. 23055A SKM-902*1 Description : Blank for Body Cover Drg. No. 23055A SKM-902*1() Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902*1, C Estab
3) FRAME TRIGER DS CAT NO.1005-006602 Description : FRAME TRIGER DS CAT NO.1005-006602() Specification : AS PER DRG. C Estab
4) STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 FOR RIFLE 5 56 Description : STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 FOR RIFLE 5 56() Specification : STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 AS PER DRG. NO. SK-5092*2(RAW MATERIAL SIZE- 40X50 MM BS:970 PT.1-1983,817 M40 "T"(BS:970 EN 24 "T")COND.HARDNESS 248-302 HB AGAINST L.F. NO. 0334032650 WILL BE SUPPLIED BY SAF AGAINST B/G). C Estab
5) BLOCK REAR FOR SMALL ARMS Description : BLOCK REAR FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Input blank of block rear (semi finish) Drg. No. SK-4857*5 For CNC M/C Description : Input blank of block rear (semi finish) Drg. No. SK-4857*5 For CNC M/C() Specification : AS PER DRG. C Estab
7) BARREL (BLANK) REQUIRED FOR REVOLVER MK-III DRG NO SK-5381R* D.A. NO. 41/08 Description : BARREL (BLANK) REQUIRED FOR REVOLVER MK-III DRG NO SK-5381R* D.A. NO. 41/08() Specification : BARREL (BLANK) REQUIRED FOR REVOLVER MK-III DRG NO SK-5381R* D.A. NO. 41/08 C Estab
8) BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN* Description : BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN*() Specification : BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN* C Estab
9) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
10) BRACKET FOR SMALL ARMS Description : BRACKET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
11) LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899 Description : LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899() Specification : LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899 C Estab
12) GUIDE PIECE Drg. No SK-2689-135 Description : GUIDE PIECE Drg. No SK-2689-135() Specification : AS PER DRG C Estab
13) Trigger Drg. No. AKC 01/08 In Finished Condition Description : Trigger Drg. No. AKC 01/08 In Finished Condition() Specification : AS PER DRG. C Estab
14) BLOCK GAS Drg. No AKC 02/4 Description : BLOCK GAS Drg. No AKC 02/4() Specification : AS PER DRG C Estab
15) PAWL GUIDE CARTRIDGE DS CAT NO. 1005-006626 DC(I) NO. 25321-SA DT- 8.4.02 Description : PAWL GUIDE CARTRIDGE DS CAT NO. 1005-006626 DC(I) NO. 25321-SA DT- 8.4.02() Specification : PAWL GUIDE CARTRIDGE DS CAT NO. 1005-006626 DC(I) NO. 25321-SA DT- 8.4.02 C Estab
16) EXTRACTOR DS CAT 1005-006633 Description : EXTRACTOR DS CAT 1005-006633() Specification : AS PER DRG C Estab
17) Sear DS CAT no. 1005-000617 for MAG 7.62MM through MIM process Description : Sear DS CAT no. 1005-000617 for MAG 7.62MM through MIM process() Specification : As Per Drg. C Estab
Category : p
Grade : 3
Size : S
3351 ARJUN BEES WAX
VADODRA VADODRA GUJRAT
PIN1 : 391760
Phone No. : 91-2668262081 		AAPFA2699N

Download 		1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Bees Wax Refined Gr-A Description : Bees Wax Refined Gr-A() Specification : BEES WAX REFINED GR A (MELTING POINT 63 TO 66 DEGREE C AND AQUEOUS EXTRACT SHALL NOT BE ACIDIC) CONFIRMING TO SPECN. NO IS- 1504;1996 (THIRD REVISION) REAFFIRMED 2002. R Estab
Category : p
Grade : 1
Size : S
3352 SUYOG CHEMICALS PVT. LTD.
AMRTA MANOR BUNGLOW NO. 1, 1ST FLOOR RAVINDRANATH TAGORE MARG, CIVIL LINES NAGPUR MAHARASHTRA
PIN1 : 440001
Phone No. : 07122520437 		S2842NGPA1

Download 		1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Plasticizer Ester type-1(DBP) Description : Plasticizer Ester type-1(DBP)() Specification : Specn-IS:14421-1997 Reaffirmed 2003 with ammend No 1 of March2003 R Estab
Category : dp
Grade : 3
Size : S
3353 HARVIN SCIENTIFIC OPTICS PVT. LTD.
406, SAI SAGAR HEIGHTS, PRAKASH NAGAR, BEGUMPET, HYDERABAD A.P.
PIN1 : 500016
Phone No. : 040-27774309 		HYDH00138F

Download 		1Ordnance Factory Dehradun

[ENR Registration]
Name Specification Use Status
1) PIVOT TO DRG NO MCT 1100 2 Description : PIVOT TO DRG NO MCT 1100 2() Specification : PIVOT TO DRG NO. MCT-1100/2 C Estab
Category : p
Grade : 2
Size : S
3354 SRI LAXMI INDUSTRIES
H.NO. 7-8-222/5, OLD AIRPORT ROAD, GOUTHAM NAGAR, FEROZGUDA, SECUNDERABAD TELANGANA
PIN1 : 500011
Phone No. : 040 2775 0400 		ABSFS2943K

Download 		1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) RECEIVER TO DRG NO CTM 0108 1 TO CTM 0108 6 Description : RECEIVER TO DRG NO CTM 0108 1 TO CTM 0108 6() Specification : AS PER DRAWING C Estab
2) RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B Description : RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B() Specification : AS PER DRAWING R Estab
Category : ddp
Grade : 2
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN FIRING for MAG Description : PIN FIRING for MAG() Specification : PIN FIRING,DS CAT NO.1005-006641 IN FINISHED CONDITION (MATERIAL TO BE ISSUED AGAINST BANK GUARANTEE) MAG 7.62 MM DC(I) NO. 25325-SA, DT.10.04.2002 C Estab
Category : p
Grade : 3
Size : S
1Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) BARREL BLANK AS PER DRG. NO. SK-01394 Description : BARREL BLANK AS PER DRG. NO. SK-01394() Specification : AS PER SPECIFICATION/REQUIREMENT C Estab
2) CYLINDER Description : CYLINDER() Specification : AS PER DRG. NO. SK-01444 C Estab
3) FINISH MACHINING OF VARIOUS MECH. COMPONENTS Description : FINISH MACHINING OF VARIOUS MECH. COMPONENTS() Specification : FINISH MACHINING OF CATCH SAFE CATCH FIRE C Estab
4) PLATE BODY TO DRG. NO. 32-0501 MK-III Description : PLATE BODY TO DRG. NO. 32-0501 MK-III() Specification : PLATE BODY TO DRG. NO. 32-0501 MK-III MATERIAL:-BS 970 Pt.1: 1983 Gd. 070 M-55 (BS 970 EN-9), FINISH:-ELECTROSTATIC POWDER COATING AFTER ASSY. ALT MATERIAL FROM IC ROUTE:-BS 3146 PT.1 1974 TYPE CLASS-8. C Estab
5) SEMI FINISHED BARREL Description : SEMI FINISHED BARREL() Specification : AS PER DRG. NO. 01445 C Estab
6) SLEEVES Description : SLEEVES() Specification : AS PER D.S. CAT. NO. 3120-004660 C Estab
Category : s
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) NUT LOCKING BARREL for MAG Description : NUT LOCKING BARREL for MAG() Specification : NUT LOCKING BARREL"0" NO. SIZE IN FINISHED CONDITION. D.S.CAT NO 5310-002661 DC(I) NO. 25349-SA DT 30.04.02 C Estab
Category : p
Grade : 3
Size : S
3355 UNIMECH
207/123, B.T. ROAD KOLKATA WEST BENGAL
PIN1 : 700036
Phone No. : 9830690349 		ADVPD7287J

Download 		1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) SCREW CSK HEAD FS 5x 12 N8 29 5X12 FOR OF L 7 Description : SCREW CSK HEAD FS 5x 12 N8 29 5X12 FOR OF L 7() Specification : SCREW CSK HEAD FS-5x 12 (N8-29-5X12) FOR B/C OF L-7 C Estab
2) SCREW FS Description : SCREW FS() Specification : SCREW FS (BC) & B/M TO DRG. No. N2-29-6X14 IN F/C L/70 C Estab
3) WASHER N5 1 10 Description : WASHER N5 1 10() Specification : WASHER TO DRG. NO . N5-1-10.5x 22 IN F/C C Estab
4) CHAIN IN FINISHED CONDITION Description : CHAIN IN FINISHED CONDITION() Specification : CHAIN IN FINISHED CONDITION U2-17-2X20 (N 10-5-2) C Estab
5) SCREW DET 36 TO SK NO OTF DD 022 IN F C Description : SCREW DET 36 TO SK NO OTF DD 022 IN F C() Specification : SCREW TO DET. 36 (TO SK. NO. OTF/DD/022) IN F/C C Estab
6) SPRING 5360 000747 Description : SPRING 5360 000747() Specification : SPRING TO D. S. CAT NO 5360-000747DC NO. 23095-SA C Estab
7) PLUNGER CATCH Description : PLUNGER CATCH() Specification : PLUNGER CATCH TO D.S CAT. NO. 1005-001730 IN F/C C Estab
8) SCREW CATCH 5305 005011 Description : SCREW CATCH 5305 005011() Specification : SCREW CATCH TO D.S CAT. NO. 5305-005011 IN F/C C Estab
9) CLIP SPRING 5340 015295 Description : CLIP SPRING 5340 015295() Specification : CLIP SPRING TO D.S. CAT NO 5340-015295 IN FINISHED CONDITION C Estab
10) PIN SAFETY LEVER WITHOUT NICKEL PLATING TO DRG NO CTM 0030 A Description : PIN SAFETY LEVER WITHOUT NICKEL PLATING TO DRG NO CTM 0030 A() Specification : AS PER DRAWING C Estab
11) ROD GUIDE ASSEMBLY TO C2 Description : ROD GUIDE ASSEMBLY TO C2() Specification : ROD GUIDE ASSEMBLY TO C2/1005-007523(RUS/ASSY 6-1) C Estab
12) SPRING 6115925 Description : SPRING 6115925() Specification : SPRING (AS) TON DRG. NO. 6115925 IN F/C C Estab
13) SPACER BEARING Description : SPACER BEARING() Specification : SPACER BEARING, CAT PART NO. BOF-N5-13-15X21X30.5 C Estab
14) SCREW TO DRG NO 2 39 5X8 B L B C IN F C FOR L 70 Description : SCREW TO DRG NO 2 39 5X8 B L B C IN F C FOR L 70() Specification : SCREW TO DRG. NO. 2-39-5X8 B/L, B/C IN F/C FOR L/70 C Estab
15) NUT HEX POL LARGE GRIP LB6M4 Description : NUT HEX POL LARGE GRIP LB6M4() Specification : NUT HEX POL LARGE GRIP LB6M4 (N3-9-4) W/T PR. FINISH C Estab
16) SPRING FINISHED DRG NO 6139884 Description : SPRING FINISHED DRG NO 6139884() Specification : SPRING FINISHED DRG NO 6139884 DC(I) NO. 18883-W C Estab
17) SPRING 6148363 Description : SPRING 6148363() Specification : SPRING IN FINISHED CONDITION TO DRG NO 6148363 C Estab
18) SPRING 6095872 Description : SPRING 6095872() Specification : SPRING TO DRG. NO. 6095872 IN F/C C Estab
19) SPRING 6095890 Description : SPRING 6095890() Specification : SPRING (H.A) TO DRG. NO. 6095890 IN F/C C Estab
20) SCREW 6122215 Description : SCREW 6122215() Specification : SCREW DRG. NO. 6122215 DC(I) NO 17185-W DT 3/1/92 C Estab
21) PIN TAPER B M TO DRG NO N4 15 3X30 IN F C FOR L 70 Description : PIN TAPER B M TO DRG NO N4 15 3X30 IN F C FOR L 70() Specification : PIN TAPER B/M TO DRG. NO. N4-15-3X30 IN F/C FOR L/70 C Estab
22) SPRING 6003273 Description : SPRING 6003273() Specification : SPRING DRG. NO. 6003273 C Estab
23) TRIGGER IN FINISH COND TO DRG NO ARDE 1593 DET 4() TRIGGER IN FINISH COND TO DRG NO ARDE 1593 DET 4 C Estab
24) SC HEX POL SMALL GRIP B6LS Description : SC HEX POL SMALL GRIP B6LS() Specification : SC. HEX. POL. SMALL GRIP B6LS 6X10D80 (N2-71) C Estab
25) SPRING HELICAL COMPRESSION 5360 001730 Description : SPRING HELICAL COMPRESSION 5360 001730() Specification : SPRING HELICAL COMPRESSION D.S CAT NO. : 5360-001730 C Estab
26) SPRING HELICAL COMPRESSION 5360 001731 Description : SPRING HELICAL COMPRESSION 5360 001731() Specification : SPRING HELICAL COMPRESSION D.S.CAT NO:5360-001731 C Estab
27) SPRING SPIRAL TORSION TO D S CAT NO 5360 Description : SPRING SPIRAL TORSION TO D S CAT NO 5360() Specification : SPRING SPIRAL TORSION IN FINISH CONDITION TO DRG NO 5360-001732 C Estab
28) SPRING SPIRAL 5360 001733 Description : SPRING SPIRAL 5360 001733() Specification : SPRING SPIRAL TO DS CAT NO 5360-001733 C Estab
29) PIN STRAIGHT HEADED 5315 00 Description : PIN STRAIGHT HEADED 5315 00() Specification : PIN STRAIGHT HEADED TO D S CAT NO 5315-00 C Estab
30) SLOTTED CHEESE HEAD SCREW M 4X12 TO DS CAT NO IS1366 P88 Description : SLOTTED CHEESE HEAD SCREW M 4X12 TO DS CAT NO IS1366 P88() Specification : SLOTTED CHEESE HEAD SCREW M 4X12 TO DS CAT NO IS1366-P88 C Estab
31) HEX NUT MX4 P IS 2389 Description : HEX NUT MX4 P IS 2389() Specification : HEX. NUT MX4-P, IS:2389 C Estab
32) HEX NUT M6 IS 1364 Description : HEX NUT M6 IS 1364() Specification : HEX NUT M6 IS:1364 C Estab
33) SPRING WASHER M4 TYPE B Description : SPRING WASHER M4 TYPE B() Specification : SPRING WASHER M4 TYPE B C Estab
34) COTTER PIN STEEL SPLIT TYPE Description : COTTER PIN STEEL SPLIT TYPE() Specification : COTTER PIN STEEL SPLIT TYPE 1.2 MM X 12MM F/C C Estab
35) SPRING HELICAL COMPRESSION 5360 006643 Description : SPRING HELICAL COMPRESSION 5360 006643() Specification : SPRING HELICAL COMPRESSION D.S.CAT NO:5360-006643 IN F/C C Estab
36) SCREW ASSEMBLING THREAD 5305 000026 Description : SCREW ASSEMBLING THREAD 5305 000026() Specification : SCREW ASSEMBLING THREAD IN F/C TO DRG. 5305-000026 C Estab
37) ASSY CHAIN BASE PLATE TO DRG NO 72046 IN FC Description : ASSY CHAIN BASE PLATE TO DRG NO 72046 IN FC() Specification : ASSY CHAIN BASE PLATE TO DRG. NO-72046 IN F/C C Estab
38) FIXING SCREW 5305 016481 Description : FIXING SCREW 5305 016481() Specification : FIXING SCREW D.S CAT. NO. : 5305-016481 F/C C Estab
39) SEAR POSITIONING SCREW 5305 003516 Description : SEAR POSITIONING SCREW 5305 003516() Specification : SEAR POSITIONING SCREW IN F/C 5305-003516 C Estab
40) FIXING SCREW 5305 003512 Description : FIXING SCREW 5305 003512() Specification : FIXING SCREW IN F/C TO DRG NO.5305-003512 C Estab
41) SPRING FIXING SCREW 5305 003514 Description : SPRING FIXING SCREW 5305 003514() Specification : SPRING FIXING SCREW IN F/C DRG.5305-003514 C Estab
42) LOCATING SCREW 5305 003515 Description : LOCATING SCREW 5305 003515() Specification : LOCATING SCREW IN F/C TO DRG. 5305-003515 C Estab
43) SCREW GRUB 093267 Description : SCREW GRUB 093267() Specification : SCREW GRUB IN F/C TO DS CAT NO: 5305-093267 C Estab
44) LOCKING SCREW ASSEMBLY 016482 Description : LOCKING SCREW ASSEMBLY 016482() Specification : LOCKING SCREW ASSEMBLY DRG. NO. DS. CAT. 5305-016482 F/C C Estab
45) SCREW LOCKING VENT BUSH 003510 Description : SCREW LOCKING VENT BUSH 003510() Specification : SCREW LOCKING VENT BUSH TO DRG, NO. : 5305-003510 F/C C Estab
46) NUT WING SLOTTED 003279 Description : NUT WING SLOTTED 003279() Specification : NUT WING SLOTTED M-14 TO DRG. NO. 5310-003279 F/C C Estab
47) TOWING RING 67473 Description : TOWING RING 67473() Specification : TOWING RING (AMG-67473) FOR RING TOWING ASSEMBLY C Estab
48) ROCKING ARM SPRING AMG 31462 Description : ROCKING ARM SPRING AMG 31462() Specification : ROCKING ARM SPRING AMG 31462 C Estab
49) SPRING FIRING MECH 181600 Description : SPRING FIRING MECH 181600() Specification : SPRING FIRING MECH TO D.S CAT. NO. 1015-181600 F/C C Estab
50) WASHER COPPER 003278 Description : WASHER COPPER 003278() Specification : WASHER COPPER TO D.S CAT. NO. 5310-003278 F/C C Estab
51) SCREW FOR IDENTIFICATION PLATE BA BRASS Description : SCREW FOR IDENTIFICATION PLATE BA BRASS() Specification : SCREW FOR IDENTIFICATION PLATE BA BRASS 6 X 1/2" C Estab
52) SCREW CSK HD 60 DEG 003520 Description : SCREW CSK HD 60 DEG 003520() Specification : SCREW CSK HD 60 DEG 4X8 TO DS CAT NO. 5305-003520 C Estab
53) SCREW RANGE SCALE M 1420 302222 Description : SCREW RANGE SCALE M 1420 302222() Specification : SCREW RANGE SCALE TO DRG NO M-1420-302222 C Estab
54) SCREW REAR SIGHT BASE TO DRG NO FS 4 X 6 Description : SCREW REAR SIGHT BASE TO DRG NO FS 4 X 6() Specification : SCREW REAR SIGHT BASE TO DRG NO FS-4 X 6 C Estab
55) RETAINING PLATE 125019 Description : RETAINING PLATE 125019() Specification : RETAINING PLATE TO DRG. NO. IRCL 530 (GF-125019J) C Estab
56) SPRING REAR SIGHT SCREW 235064 Description : SPRING REAR SIGHT SCREW 235064() Specification : SPRING REAR SIGHT SCREW DRG NO. IRCL 599 (GF 235064 H) C Estab
57) SCREW RANGE INDICATOR TO DRG NO MCS 3X6 Description : SCREW RANGE INDICATOR TO DRG NO MCS 3X6() Specification : SCREW RANGE INDICATOR TO DRG. NO. MCS-3X6 C Estab
58) APERTURE SIGHT 125036 Description : APERTURE SIGHT 125036() Specification : APERTURE SIGHT TO DRG NO GF-125036 C Estab
59) TRIGGER IN F C TO DRG NO IQW 157 DC 35795 A Description : TRIGGER IN F C TO DRG NO IQW 157 DC 35795 A() Specification : TRIGGER IN F/C TO DRG. NO. IQW-157. DC 35795-A C Estab
60) SCREW RUBBER PLATE TO DRG NO FS 4X10 Description : SCREW RUBBER PLATE TO DRG NO FS 4X10() Specification : SCREW RUBBER PLATE TO DRG NO FS 4X10 -5.8 C Estab
61) RETAINING KNOB SHOULDER PAD Description : RETAINING KNOB SHOULDER PAD() Specification : RETAINING KNOB SHOULDER PAD TO DRG. No. GF C Estab
62) NUT FRONTGRIP TO DRG NO GF 165004 FC Description : NUT FRONTGRIP TO DRG NO GF 165004 FC() Specification : NUT FRONTGRIP TO DRG NO GF-165004 F/C C Estab
63) MAIN SPRING TO DRG NO IRCL 571 GF 215032 Description : MAIN SPRING TO DRG NO IRCL 571 GF 215032() Specification : MAIN SPRING TO DRG NO IRCL 571 (GF 215032 H) F/C C Estab
64) BRUSH CLEANING 215148 Description : BRUSH CLEANING 215148() Specification : BRUSH CLEANING TO DRG N O-215148 C Estab
65) WASHER MECH TUBE TO DRG NO GF 215093 IN FC Description : WASHER MECH TUBE TO DRG NO GF 215093 IN FC() Specification : WASHER MECH TUBE TO DRG NO GF 215093 IN F/C C Estab
66) WASHER TO HAMMER PIVOT PIN TO DRG NO GF 144022 Description : WASHER TO HAMMER PIVOT PIN TO DRG NO GF 144022() Specification : WASHER TO HAMMER PIVOT PIN TO DRG NO GF 144022 C Estab
67) STOPPER GF 177639 Description : STOPPER GF 177639() Specification : STOPPER TO DRG. No. GF-177639 IN FINISHED CONDITION C Estab
68) CATCH SPRING 5360 002363 Description : CATCH SPRING 5360 002363() Specification : CATCH SPRING TO D. S CAT NO 5360-002363 C Estab
69) FIRING PIN CATCH SPRING 000550 Description : FIRING PIN CATCH SPRING 000550() Specification : FIRING PIN CATCH SPRING TO D.S CAT No. 1055-000550 C Estab
70) PIN TO M 1107 166210 18513 W Description : PIN TO M 1107 166210 18513 W() Specification : PIN TO M 1107 166210 DC(I) NO 18513-W DT-16.03.99 C Estab
71) OIL BRUSH COMPLETE TO DS CAT NO 1055 0000561 IN FC Description : OIL BRUSH COMPLETE TO DS CAT NO 1055 0000561 IN FC() Specification : OIL BRUSH COMPLETE TO DS CAT NO 1055-0000561 IN F/C C Estab
72) BOLT CATCH TO D S CAT NO 5306 006656 Description : BOLT CATCH TO D S CAT NO 5306 006656() Specification : AS PER DRAWING C Estab
73) CARTRIDGE CATCH 000546 Description : CARTRIDGE CATCH 000546() Specification : CARTRIDGE CATCH TO D.S CAT NO.: 1055-000546 C Estab
74) CATCH TO DS CAT NO 1055 000535 F1312 190060 IN FC Description : CATCH TO DS CAT NO 1055 000535 F1312 190060 IN FC() Specification : CATCH TO DS CAT NO 1055-000535 F1312-190060 IN F/C C Estab
75) SCREW SECURING NUT 5305 009909 Description : SCREW SECURING NUT 5305 009909() Specification : SCREW SECURING NUT TO DS CAT. NO: 5305-009909 C Estab
76) SPIRAL TYPE ROLL PIN TO DRG NO M 1108 830257 Description : SPIRAL TYPE ROLL PIN TO DRG NO M 1108 830257() Specification : SPIRAL TYPE ROLL PIN TO DRG NO M 1108 830257 C Estab
77) SECURING NUT 5310 009495 F 1312 190320 Description : SECURING NUT 5310 009495 F 1312 190320() Specification : SECURING NUT DSCAE 5310-009495 (F-1312-190320) IN F/C C Estab
78) SCREW VENTURY AXIS PIN TO DRG NO 1440 13 Description : SCREW VENTURY AXIS PIN TO DRG NO 1440 13() Specification : SCREW VENTURY AXIS PIN TO DRG NO 1440-13 C Estab
79) FIRING PIN GUIDE TO DRG, NO IRCL 529 (GF 125010 L) Description : FIRING PIN GUIDE TO DRG, NO IRCL 529 (GF 125010 L)() Specification : AS PER DRAWING C Estab
80) SUPPORT 125100 Description : SUPPORT 125100() Specification : SUPPORT TO DRG. NO. GF-125100 IN FINISHED CONDITION C Estab
81) FRONT SUPPORT FOR MECH TUBE GF 125093 Description : FRONT SUPPORT FOR MECH TUBE GF 125093() Specification : FRONT SUPPORT FOR MECH TUBE TO DRG. GF-125093 C Estab
82) REAR SUPPORT FOR MECH TUBE TO DRG NO GF 125102 Description : REAR SUPPORT FOR MECH TUBE TO DRG NO GF 125102() Specification : REAR SUPPORT FOR MECH TUBE TO DRG NO GF-125102 C Estab
83) SPRING TESTER TO DRG NO GF 214608 IN FINISHED CONDITION Description : SPRING TESTER TO DRG NO GF 214608 IN FINISHED CONDITION() Specification : SPRING TESTER TO DRG NO: GF-214608 IN FINISHED CONDITION C Estab
84) ORDNANCE 84 MM ROCKET LAUNCHER BARREL VENTURY ASSEMBLY Description : ORDNANCE 84 MM ROCKET LAUNCHER BARREL VENTURY ASSEMBLY() Specification : ORDNANCE 84 MM ROCKET LAUNCHER BARREL VENTURY ASSEMBLY C Estab
85) RIVET CARTRIDGE CASE GUIDE 113314 Description : RIVET CARTRIDGE CASE GUIDE 113314() Specification : RIVET CARTRIDGE CASE GUIDE PT/DRG. NO. : M1115-113314 C Estab
86) CATCH 150043 Description : CATCH 150043() Specification : CATCH DRG NO-150043 H IN F/C C Estab
87) WASHER 118136 Description : WASHER 118136() Specification : WASHER 4-200 HV DRG. M1170-118136 F/C C Estab
88) WASHER ISO 5 200 HV DOC No 304062702 IN F C Description : WASHER ISO 5 200 HV DOC No 304062702 IN F C() Specification : WASHER ISO-5-200 HV DOC. No. 304062702 IN F/C C Estab
89) SLOTTED CHEESE HEAD SCREW 304059753 Description : SLOTTED CHEESE HEAD SCREW 304059753() Specification : SLOTTED CHEESE HEAD SCREW DOC NO. 304059753 IN F/C C Estab
90) SPRING WASHER FFB 2 POINT 6 PART NO M1171 125118 IN SPE Description : SPRING WASHER FFB 2 POINT 6 PART NO M1171 125118 IN SPE() Specification : SPRING WASHER FFB 2.6 PART NO. M1171-125118 IN SPE C Estab
91) WASHER TO DRG NO F1303 020220 D IN F C DC NO 19 Description : WASHER TO DRG NO F1303 020220 D IN F C DC NO 19() Specification : WASHER TO DRG. NO. F1303-020220 D IN F/C. DC.NO.19 C Estab
92) SLOTTED CHEESE HEAD SCREW F 1303 030730 B Description : SLOTTED CHEESE HEAD SCREW F 1303 030730 B() Specification : SLOTTED CHEESE HEAD SCREW M3 X 6 F1303-030730 B C Estab
93) SPRING TRIGGER SEAR TO DRG NO IRCL 538 GF 125075 Description : SPRING TRIGGER SEAR TO DRG NO IRCL 538 GF 125075() Specification : SPRING TRIGGER SEAR TO DRG NO IRCL 538 (GF 125075 L) F/C C Estab
94) CLEANING BRUSH F 1303 025200 Description : CLEANING BRUSH F 1303 025200() Specification : CLEANING BRUSH TO DRG. NO: F 1303-025200 IN F/C C Estab
95) REAR SIGHT SPRING 125041 Description : REAR SIGHT SPRING 125041() Specification : REAR SIGHT SPRING TO DRG NO IRCL 531 (GF-125041 K) C Estab
96) EXTRACTOR SPRING 215037 Description : EXTRACTOR SPRING 215037() Specification : EXTRACTOR SPRING TO DRG. NO. GF-215037 C Estab
97) WASHER TO DRG NO 902 03 117 IN F C Description : WASHER TO DRG NO 902 03 117 IN F C() Specification : WASHER TO DRG. NO. 902-03-117 IN F/C C Estab
98) RAMMER Description : RAMMER() Specification : RAMMER TO DRG. NO. 765-93-CD-156 CONST OF TWO PARTS C Estab
99) BOLT WRENCH TO DRG No 2YU5 6 Description : BOLT WRENCH TO DRG No 2YU5 6() Specification : BOLT WRENCH TO DRG. No. 2YU5/6 C Estab
100) SPRING MAIN MARK 2 TO DRG NO NAD 1002C 99 4 Description : SPRING MAIN MARK 2 TO DRG NO NAD 1002C 99 4() Specification : SPRING MAIN, MARK 2 TO DRG. NO. NAD.1002C/99/4 C Estab
101) CRANK HANDLE Description : CRANK HANDLE() Specification : CRANK HANDLE TO DRG. NO. CO-817, RGF-10819/98 F/C C Estab
102) SCREW FIXING TRIGGER GUARD ITEM 9 RGF 10819 99 F C Description : SCREW FIXING TRIGGER GUARD ITEM 9 RGF 10819 99 F C() Specification : SCREW FIXING TRIGGER GUARD (ITEM-9) RGF-10819/99, F/C C Estab
103) NUT PLUNGER CATCH RET CRANK HANDLE 10819 98 F C Description : NUT PLUNGER CATCH RET CRANK HANDLE 10819 98 F C() Specification : NUT PLUNGER CATCH RET. CRANK HANDLE 10819/98 F/C C Estab
104) TRIGGER WITH PIVOT SCREW Description : TRIGGER WITH PIVOT SCREW() Specification : TRIGGER WITH PIVOT SCREW (ITEM-3) IN F/C C Estab
105) SCREW FIXING ITEM 8 DRG RGF 10819 98 CO 828 F C Description : SCREW FIXING ITEM 8 DRG RGF 10819 98 CO 828 F C() Specification : SCREW FIXING (ITEM-8) DRG. RGF-10819/98 CO-828 F/C C Estab
106) SPRING TRIGGER SEAR Description : SPRING TRIGGER SEAR() Specification : SPRING TRIGGER SEAR MK-1 ITEM 5 RGF 10819/99 F/C C Estab
107) LEFT STOP TO DRG NO NAD 18301 18 IN F C Description : LEFT STOP TO DRG NO NAD 18301 18 IN F C() Specification : LEFT STOP TO DRG. NO. NAD 18301/18 IN F/C C Estab
108) RIGHT STOP TO DRG NO NAD 18301 19 IN F C Description : RIGHT STOP TO DRG NO NAD 18301 19 IN F C() Specification : RIGHT STOP TO DRG. NO. NAD 18301/19 IN F/C C Estab
109) PIN 5PR22AX32 POINT 40XK38 POINT 5 45 POINT 5 HBC CHEM PHOS OIL Description : PIN 5PR22AX32 POINT 40XK38 POINT 5 45 POINT 5 HBC CHEM PHOS OIL() Specification : PIN 5PR22AX32.40XK38.5......45.5 HBC CHEM. PHOS.OIL C Estab
110) INNER SPRING Description : INNER SPRING() Specification : INNER SPRING TO DRG. NO. AK-630 106-25 IN F/C C Estab
111) CATCH SPRING TO DRG NO AO 18 01 027 Description : CATCH SPRING TO DRG NO AO 18 01 027() Specification : CATCH SPRING TO DRG. NO. AO-18.01.027 C Estab
112) SPLIT PIN 3 POINT 2 X 32 IS 549 1974 Description : SPLIT PIN 3 POINT 2 X 32 IS 549 1974() Specification : SPLIT PIN 3.2X32 IS : 549-1974 C Estab
113) SPLIT PIN 3 X 36 IS 549 1974 Description : SPLIT PIN 3 X 36 IS 549 1974() Specification : SPLIT PIN 3X36 IS : 549-1974 C Estab
Category : p
Grade : 3
Size : S
1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) FABRICATION OF TOWING RING TO DRG NO AMG 67473 Description : FABRICATION OF TOWING RING TO DRG NO AMG 67473() Specification : FABRICATION OF TOWING RING TO DRG. NO. AMG-67473 C Estab
Category : p
Grade : 3
Size : S
3356 INDUSTRIAL JEWELS PVT. LTD.
2nd FLOOR, OLD KAMANI CHAMBERS, BALLARD ESTATE MUMBAI MAHARASTRA
PIN1 : 400001
Phone No. : 9825170094 		AAACI5690P

Download 		1Ordnance Factory Dehradun

[ENR Registration]
Name Specification Use Status
1) JEWELL TO DRG. NO. MCT-794. Description : JEWELL TO DRG. NO. MCT-794.() Specification : As per required Specification C Estab
Category : p
Grade : 2
Size : M
3357 KIRLOSKAR BROTHERS LIMITED
"YAMUNA", S.NO. 98/3 TO 7, BANER, PUNE MAHARASHTRA
PIN1 : 411045
Phone No. : 020 2721 4241 		AAACK7300E

Download 		1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) COOLING TANK WITH PUMP UNIT AK-630 Assy. 117/50 SB Description : COOLING TANK WITH PUMP UNIT AK-630 Assy. 117/50 SB() Specification : As per Drawing C Estab
2) PUMP SET Description : PUMP SET() Specification : PUMP SET MODEL : UP 150-38B MAKE : KIRLOSKAR C Estab
Category : ddp
Grade : 3
Size : S
3358 A K INDUSTRIES, NASHIK
E-53, MIDC AREA, SATPUR SATPUR NASHIK MAHARASHTRA
PIN1 : 422007
Phone No. : 02532350276 		AAFFA0275L

Download 		1Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) PAINT R/M A/D LIGHT BRS. GREEN Description : PAINT R/M A/D LIGHT BRS. GREEN() Specification : PAINT R/M A/D LIGHT BRS. GREEN R Estab
2) PAINT R/M A/D O.GREEN ISC-220 Description : PAINT R/M A/D O.GREEN ISC-220() Specification : AS PER O.F. BHUSAWAL REQUIREMENT/SPECIFICATION R Estab
3) PAINT RMP R/O Z/C A/D JSS-8010 Description : PAINT RMP R/O Z/C A/D JSS-8010() Specification : AS PER O.F. BHUSAWAL REQUIREMENT/SPECIFICATION R Estab
Category : p
Grade : 1
Size : L
3359 MOONLITE GLUE INDUSTRIES
PLOT NO. 5, GALI NO. 9, SAMAPUR INDUSTRIAL ARAE, DELHI DELHI
PIN1 : 110042
Phone No. : 9810891535 		AAAFM7048B

Download 		1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) N C DOPE APC 236 TO SPECN JSS 8010 62 1997 Description : N C DOPE APC 236 TO SPECN JSS 8010 62 1997() Specification : N C DOPE(APC-236) TO SPECN JSS 8010-62-1997 C Estab
2) ANTACID PAINT RFU Description : ANTACID PAINT RFU() Specification : ANTACID PAINT RFU, AMMN. BITUMINUOUS C Estab
3) PAINT RMAD Description : PAINT RMAD() Specification : PAINT RMAD SPRAY SG BLACK IS 168 1979 C Estab
4) VARNISH OIL STOVING Description : VARNISH OIL STOVING() Specification : VARNISH OIL STOVING (APC-221) GR-1 TO SPECN. JSS-8010-28 C Estab
5) APC 219 Description : APC 219() Specification : APC No. 219 FOR PRI. 13A, 18A, 19A, 12 MK-4, 1A. C Estab
6) VARNISH Description : VARNISH() Specification : VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997 C Estab
Category : p
Grade : 3
Size : S
3360 ASIA TEXTILES, KANPUR
8/239-A, SHAFIABAD, CHAMANGANJ, KANPUR U.P.
PIN1 : 208001
Phone No. : 0512270496 		AAAGO0053Q

Download 		1Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) WEBBING COTTON O.G.2.5MM THICK Description : WEBBING COTTON O.G.2.5MM THICK() Specification : WEBBING COTTON BAND 2.5 MM +/- 0.25 MM THICK X 25.4 MM +/- 1.3 MM WIDTH DYED OLIVE GREEN (ISC-220 OF IS-5-1994 AMMENDMENT NO.1 FOURTH REVISION) SUITABLE MOULD PROOFED TO SPECN :"JSS-8305-18-1993" "DC NO.3176-ME DATED 12.08.1994" NOTE :- T R Estab
2) WEBBING COTTON SIZE 3.00X25MM. Description : WEBBING COTTON SIZE 3.00X25MM.() Specification : WEBBING COTTON BAND 3.00 MM THICK X 25 MM WIDTH SUITABLE MOULD PROOFED DYED OLIVE GREEN ( ISC-220 OF IS-5-78 ) TO SPECN: JSS-8305-18-93 DC NO.3176 ME DATED 12TH AUGUST 94. NOTE:-TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LABORATORIES FOR R Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) 9911847669 HINGE WITH HINGE PIN ASSY FOR BOX H2A Description : 9911847669 HINGE WITH HINGE PIN ASSY FOR BOX H2A() Specification : HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067 R Estab
2) 9911842192 CATCH AS PER DRG OFB C 1561 Description : 9911842192 CATCH AS PER DRG OFB C 1561() Specification : CATCH AS PER DRG NO OFB/C/1561 & CQA PART NO. ISV-585A CORROSPONDING AHSP DRG NO.ISV-585A DC 35750 DATED 14/07/1994. R Estab
3) 9911846365 CATCH PLATE WITHOUT ASSLY ETC Description : 9911846365 CATCH PLATE WITHOUT ASSLY ETC() Specification : AS PER DRAWING/SPECIFICATION. R Estab
4) 9911846364 ENGAGING PLATE FOR BOX H2A Description : 9911846364 ENGAGING PLATE FOR BOX H2A() Specification : AS PER OFBH SPECIFICATION R Estab
5) 9911846362 PLATE FOR HINGE OF BOX H2A Description : 9911846362 PLATE FOR HINGE OF BOX H2A() Specification : AS PER DRG./SPECIFICATION R Estab
Category : p
Grade : 3
Size : S

Copyright © 2025 - OFB