List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
3541 ANUP BRUSHES
120/17 LAJPAT NAGAR KANPUR U.P.
PIN1 : 208005
Phone No. : 0512-2295042
GSTIN : : 09AWSPS4585Q1 		AWSPS4585Q

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BRUSH CLEANING BORE 1 A Description : BRUSH CLEANING BORE 1 A() Specification : BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) 3 Point Sling for JVPC to DRG No. 204 04 03 00 00 000 00DA[70]() Specification : 3 Point Sling for JVPC to DRG No. 204 04 03 00 00 000 00DA C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) 3 Point Sling for JVPC[7012470197]() Specification : 3 Point Sling for JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) TOOL REMOVING RUPTURED CASE FOR MAG Description : TOOL REMOVING RUPTURED CASE FOR MAG() Specification : TOOL REMOVING RUPTURED CASE 7.62MM 1A GEN.ARRANGEMENT TO DRG DS CAT NO.4933-000215 DC(I)NO.24278-SA DT.04-03-99 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) TOOL REMOVING RUPTURED CASE FOR MAG Description : TOOL REMOVING RUPTURED CASE FOR MAG() Specification : TOOL REMOVING RUPTURED CASE 7.62MM 1A GEN.ARRANGEMENT TO DRG DS CAT NO.4933-000215 DC(I)NO.24278-SA DT.04-03-99 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) TOOL REMOVING RUPTURED CASE FOR MAG Description : TOOL REMOVING RUPTURED CASE FOR MAG() Specification : TOOL REMOVING RUPTURED CASE 7.62MM 1A GEN.ARRANGEMENT TO DRG DS CAT NO.4933-000215 DC(I)NO.24278-SA DT.04-03-99 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO. 4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10 Description : TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO. 4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10() Specification : TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO. 4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10 C Estab
2) TOOL CLEANING GAS ACE-02 Description : TOOL CLEANING GAS ACE-02() Specification : AS PER DRG C Estab
3) CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142 Description : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142() Specification : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142 C Estab
4) TOOL REMOVING RUPTURED CASE FOR MAG Description : TOOL REMOVING RUPTURED CASE FOR MAG() Specification : TOOL REMOVING RUPTURED CASE 7.62MM 1A GEN.ARRANGEMENT TO DRG DS CAT NO.4933-000215 DC(I)NO.24278-SA DT.04-03-99 C Estab
5) BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION. Description : BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION.() Specification : BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION. C Estab
6) BRUSH CLEANING for MAG Description : BRUSH CLEANING for MAG() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Estab
7) CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION. Description : CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION.() Specification : CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION. C Estab
8) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
9) OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10 Description : OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10() Specification : OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10 C Estab
10) BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. Description : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.() Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. C Estab
11) Rod cleaning 7.62 mm Barrel gas cylinder 1A DS CAT No. 1005-000358 Description : Rod cleaning 7.62 mm Barrel gas cylinder 1A DS CAT No. 1005-000358() Specification : AS PER DRG. C Estab
12) PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION. Description : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.() Specification : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO. 4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10 Description : TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO. 4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10() Specification : TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO. 4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10 C Estab
2) TOOL CLEANING GAS ACE-02 Description : TOOL CLEANING GAS ACE-02() Specification : AS PER DRG C Estab
3) CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142 Description : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142() Specification : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142 C Estab
4) TOOL REMOVING RUPTURED CASE FOR MAG Description : TOOL REMOVING RUPTURED CASE FOR MAG() Specification : TOOL REMOVING RUPTURED CASE 7.62MM 1A GEN.ARRANGEMENT TO DRG DS CAT NO.4933-000215 DC(I)NO.24278-SA DT.04-03-99 C Estab
5) BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION. Description : BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION.() Specification : BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION. C Estab
6) BRUSH CLEANING for MAG Description : BRUSH CLEANING for MAG() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Estab
7) CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION. Description : CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION.() Specification : CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION. C Estab
8) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
9) OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10 Description : OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10() Specification : OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10 C Estab
10) BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. Description : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.() Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. C Estab
11) Rod cleaning 7.62 mm Barrel gas cylinder 1A DS CAT No. 1005-000358 Description : Rod cleaning 7.62 mm Barrel gas cylinder 1A DS CAT No. 1005-000358() Specification : AS PER DRG. C Estab
12) PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION. Description : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.() Specification : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
3542 Arihant Agencies
Sastri Chowk Main Road Titilagarh Orissa
PIN1 : 767033
Phone No. : 220227
GSTIN : 21ACHPJ4939J1ZK 		ACHPJ4939J

Download 		1) Ordnance Factory Bolangir
Name Specification Use Status
1) PAINT READYMIXED MARKING WHITE[10]() Specification : PAINT READYMIXED MARKING WHITE, TYPE-STENCILLING, FINISH-SMOOTH,SEMI GLOSSY TO SPECN:IS.138- 2018(4TH REV.) (TO BE SUPPLIED IN 500ML PACK) P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) ETHYLENE GLYCOL (GENERAL GRADE) TO SPECN. IS[10]() Specification : ETHYLENE GLYCOL (GENERAL GRADE) TO SPECN. IS: 5295-1985 (FIRST REVISION) REAFFIRMED-2018. P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) LIQUID PARAFFIN GR[10]() Specification : LIQUID PARAFFIN GR.1 SPECN: JSS-9160-05:2021(REV.NO.4) P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) ANTIMONY SULPHIDE [BLACK] IN LUMPS[10]() Specification : ANTIMONY SULPHIDE [BLACK] IN LUMPS TO SPECN. JSS-6810-71:2019 REV.NO-5 DC-6159-ME DT.10.07.21 DS CAT NO.6810-000-920. P Nonestab
2) TOLUENE, PURE, NITRATION GRADE[10]() Specification : TOLUENE, PURE, NITRATION GRADE TO SPECN. IS: 537-2011-REAFFIRMED-2016. (TO BE SUPPLIED IN 20 LITRES PLASTIC CONTAINER) P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) PARAFFIN WAX SPECIAL 2571136015[25]() Specification : PARAFFIN WAX SPECIAL TO JSS-9160-06-2021, Rev-4 P Nonestab
2) KAOLIN TO JSS 1001410101[10]() Specification : KAOLIN TO JSS-9620-02:2016, REV-3. DC NO: 5486-ME, DT.24.09.2016. P Nonestab
3) PARANITRO TOLUENE TO SPECN IND ME 962 1001611650[10]() Specification : PARANITRO TOLUENE TO SPECN.IND/ME/962:2016, DC-5460-ME,DT.01.06.16 P Nonestab
4) PAINT READY MIXED MIDDLE BUFF AIR DRYING SEMI GLOSSY TYPE BRUSHING CONSISTENCY 1011317359[10]() Specification : PAINT READYMIXED(MIDDLE BUFF) AIR DRYING SEMI GLOSSY, TYPE-BRUSHING CONSISTENCY TO SPECN: IS-168:2016-4TH REVISION APPLICABLE FOR DEFENCE USE & COLOUR SHADE ISC NO.359 OF IS:5-2007(6TH REVISION) REAF-2017.(TO BE SUPPLIED IN 5 LTRS PACK) P Nonestab
5) PAINT R M AIRDRYING MATT ORTHOXYLENE BASED ZINC CHROME RED OXIDE TO SPECN 1012700743[10]() Specification : PAINT R/M AIRDRYING MATT ORTHOXYLENE BASED ZINC CHROME RED OXIDE TO SPECN.IND/ ME/ 964(PROV), DCI 5262-ME, DT-24.06.14,MODE OF APPLICATION-SPRAYING/ BRUSHING/ DIPPING/ POUR, FOR INNER COATING OF HE. SHELL. [TO BE SUPPLIED IN 500ML PA P Nonestab
6) PAINT READYMIXED BLACK AIR DRYING MARKING GLOSS VALUE 31 TO 50 AT 45 DEGREE TO SPECN 1011310538[10]() Specification : PAINT READYMIXED BLACK,AIR DRYING MARKING GLOSS VALUE 31 TO 50 AT 45 DEGREE TO SPECN:IS-138- 2018(4TH REV.) FOR DEFENCE USE, MODE OF APPLICATION: STENCILLING (TO BE SUPPLIED IN 500 ML PACK). P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY[18]() Specification : LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) ADHESIVE TAPE WP FABRIC - 25 MM TO SPEC IND/ME/79 (b)[10]() Specification : ADHESIVE TAPE WP FABRIC - 25 MM TO SPEC IND/ME/79 (b) C Nonestab
2) TAPE ADHESIVE WATER PROOF FABRIC BASE TO SIZE:-50MM WIDE,COLOUR BLACK[10]() Specification : TAPE ADHESIVE WATER PROOF FABRIC BASE TO SIZE:-50MM WIDE,COLOUR BLACK SPECN.IND/ME/790(b): 2013 DC NO. 5266-ME,DT.24.06.2014 (EACH ROLL OF 50 MTRS.). C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) MILL BOARD DISC TO SIZE: 93MM DIA x 3MM THICK (WAXED),DRG.NO:CIA/AMN/2650[62]() Specification : MILL BOARD DISC TO SIZE: 93MM DIA x 3MM THICK (WAXED),DRG.NO:CIA/AMN/2650,DRG.PART NO.ISV-482 GA DC NO.37330-A,DT.04.02.2013 MATERIAL:MILL BOARD TO JSS:9310-01-2014-Rev-3 DC-5290 ME DT.16.12.2014. C Nonestab
2) MILL BOARD, SIZE-787X558X2.5MM (T) TO SPECN. JSS-9310-01:2014[61]() Specification : MILL BOARD, SIZE-787X558X2.5MM (T) TO SPECN. JSS-9310-01:2014, REV-3, DC-5290 ME, DT.16.12.14 WITH CUPPING QUALITY.AS PER DRG.NO.IRW145(CUP) DC NO.36005-A DT.18.09.95. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) PARTITION TO PART NO.ISV 227SA[64]() Specification : PARTITION TO PART NO.ISV 227SA DC.35919-A Dt.21.02.95 PACKING OF FUZE 117 MK-20. C Nonestab
2) PIECE PACKING END[64]() Specification : PIECE PACKING END TO PT NO ISV-241 SA DRG NO CQA(A)/AMN/2543.Dt-2 DC.35099-A Dt.31-05-91 C Nonestab
3) PIECE PACKING SIDE PART NO.ISV228SA[64]() Specification : PIECE PACKING SIDE PART NO.ISV228SA DC.35919A Dt.21.02.95 FOR PACKING OF FUZE 117 MK-20. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) MILL BOARD (WAXED) 200X200X2.5 (MM) (END SUPPORT) USING MATERIAL SPECN.MILL BOARD[61]() Specification : MILL BOARD (WAXED) 200X200X2.5 (MM) (END SUPPORT) USING MATERIAL SPECN.MILL BOARD TO JSS-9310-01:2014: REV-3 DC NO.5290 ME DT.16.12.14&PARAFFIN WAX AMMN. TO JSS: 9160-09 2010-REV-1 DC 5024 ME DT.01.08.11. C Nonestab
2) MIIL BOARD (WAXED),290*200*2.5(MM) (TOP SUPPORT) USING MATERIAL MILL BOARD TO[61]() Specification : MIIL BOARD (WAXED),290*200*2.5(MM) (TOP SUPPORT) USING MATERIAL MILL BOARD TO JSS-9310-01-2014 REV-3 DC NO.5290-ME DT.16.12.14 & PARAFFIN WAX AMMN.TO JSS- 9160-09:2010 REV-1 DC:5024-ME DT.01.08.11 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) FELT ON TOP[62]() Specification : FELT (ON TOP) PRESSED WOOL FELTS(PROOFED) SIZE=280*200*5 TO 6.3(MM) SOFT QUALITY TO IS-1719:2000 REVISION-4 (REAFFIRMED-2019) C Nonestab
2) FELT END SUPPORT[62]() Specification : FELT (END SUPPORT) PRESSED WOOL FELTS(PROOFED) SIZE=200*200*2.5 (MM) SOFT QUALITY TO IS-1719:2000 REVISION-4 (REAFFIRMED-2019) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FELT W WHITE3MM TH X132CM 1CM WIDE[21]() Specification : AS PER SPECN. R Nonestab
2) FELT SHEET WHITE 1320 MM X 6 MM TH.[21]() Specification : IS-1719-2000,fourth REV. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SHELLAC TO SPECN. JSS: 8010-17.[10]() Specification : JSS 8010-17 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001712406 SILVER NITRATE (SPCL GR) IS-2214-1977 Description : 1001712406 SILVER NITRATE (SPCL GR) IS-2214-1977() Specification : IS: 2214-1977 (FIRST REVISION) REAFFIRMED-2003 R Estab
2) 1003020120 HARDNER HV953 FOR EPOXY RESIN Description : 1003020120 HARDNER HV953 FOR EPOXY RESIN() Specification : IND/ME/924 (PROV) R Estab
3) 1003022000 EPOXY RESIN Description : 1003022000 EPOXY RESIN() Specification : IND/ME/924 (PROV.); R Estab
4) 1003022002 EPOXY BASED SEALANT SPCN IND ME 924 Description : 1003022002 EPOXY BASED SEALANT SPCN IND ME 924() Specification : IND/ME/924(PROV) R Estab
5) 1003119410 METRO ARK SILICON 17 COMPOUND Description : 1003119410 METRO ARK SILICON 17 COMPOUND() Specification : IND/ME/989 (PROV) R Estab
6) 1003254003 GLUE ANIMAL POWDER;SPECN.IS-852-94. Description : 1003254003 GLUE ANIMAL POWDER;SPECN.IS-852-94.() Specification : SPECN NO. IS-852:1994 R Estab
7) 1020870900 WAX MICRO CRYSTALLINE O.N.G.C. TYPE Description : 1020870900 WAX MICRO CRYSTALLINE O.N.G.C. TYPE() Specification : SPECN NO. IND/ME/868 R Estab
8) 2101091539 CLOTH CAMBRIC BLEACHED 1143 MM WIDE Description : 2101091539 CLOTH CAMBRIC BLEACHED 1143 MM WIDE() Specification : IS: 5088 - 1982 R Estab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) BARYTES (TYPE-2) Description : BARYTES (TYPE-2)() Specification : BARYTES (TYPE-2) TO JSS:6810-51 : 2013 REV-3 DC.NO.5195-ME, DT.19.03.14. R Estab
2) SODIUM AZIDE Description : SODIUM AZIDE() Specification : SODIUM AZIDE TO JSS-6810-79:2016, REV-2 DCI- 6049-ME, DT. 08.06.17 R Estab
3) BARIUM PEROXIDE GR.I Description : BARIUM PEROXIDE GR.I() Specification : BARIUM PEROXIDE GR.I TO JSS-6810-96 -2011-REV-2 ADMT-1 DC NO 5081 ME, DT.06.08.2012. R Estab
4) BARIUM NITRATE,GR.1 Description : BARIUM NITRATE,GR.1() Specification : BARIUM NITRATE, GR.1 TO JSS:6810-59 -2010 (REV.NO.3), 4087-ME DT.24.09.10 WITH AMENDMENT LIST NO.1, (SIEVE SIZE:-MINIMUM 97+/-3 % PASSING THROUGH 125 MICRON IS SIEVE) R Estab
5) MINERAL JELLY TO JSS-8030-09:2010 Description : MINERAL JELLY TO JSS-8030-09:2010() Specification : MINERAL JELLY TO JSS-8030-09:2010, REV-2 DC-5011-ME DTD.14.02.11 R Estab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) ACETONE TO SPN Description : ACETONE TO SPN() Specification : ACETONE TO IS-170-1986 TO BE SUPPLIED IN 200 LITRES DRUM. R Estab
2) SILICON GREASE Description : SILICON GREASE() Specification : SILICON GREASE -METRO ARK SILICON 17 COMPOUND P Estab
3) SODIUM NITRITE Description : SODIUM NITRITE() Specification : SODIUM NITRITE TECHNICAL TO SPECIFICATION JSS-6810-104-2012-REV. 3, DC NO. 5125-ME, 06.05.13 R Estab
Category : s
Grade : 3
Size : S
3543 P. S. SUPPLIER
372/D, PATULI, MADHYAMGRAM, WARD NO. 3 KOLKATA WEST BENGAL
PIN1 : 700155
Phone No. : 9874539759 		AZBPD5583D

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) BOX SPARE SPRING KEEP PIN WASHER INSULATOR Description : BOX SPARE SPRING KEEP PIN WASHER INSULATOR() Specification : BOX SPARE SPRING KEEP PIN WASHER & INSULATOR F/C P Estab
Category : dp
Grade : 3
Size : S
3544 POOJA ENTERPRISES & FABRICATION
KHADAKA ROAD, LAL BUILDING, BHUSAWAL MAHARASHTRA
PIN1 : 425201
Phone No. : 9422276091 		AMSPP9259J

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) PROCESSING FABRICATION SM642 Description : PROCESSING FABRICATION SM642() Specification : PROCESSING FABRICATION SM-642 R Estab
Category : p
Grade : 3
Size : S
3545 RASHMI ENTERPRISES & FABRICATION
KHADAKA ROAD, BHUSAWAL MAHARASHTRA
PIN1 : 425201
Phone No. : 9422773733 		ACRPI8833N

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) ASSISTANCE OF LABOURS FOR PCP Description : ASSISTANCE OF LABOURS FOR PCP() Specification : AS PER OFBH SPECIFICATION/REQUIREMENT R Estab
2) PROCESSING OF BOX C 43A AT PCP Description : PROCESSING OF BOX C 43A AT PCP() Specification : PROCESSING OF BOX C-43A AT PCP R Estab
Category : p
Grade : 3
Size : S
3546 MAXWELL RUBBERS
245, SMALL FACTORY AREA VARDHAMAN NAGAR NAGPUR MAHARASHTRA
PIN1 : 440008
Phone No. : 9823881881
GSTIN : 27ADRPM5799E1ZS 		ADRPM5799E

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) O Ring Size 8 point 1 by 1 point 6 to OFAJ Drg No FS2882A Description : O Ring Size 8 point 1 by 1 point 6 to OFAJ Drg No FS2882A() Specification : O Ring Size 8 point 1 x 1 point 6 to OFAJ Drg No FS2882A C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) WASHER SQUEEZER Description : WASHER SQUEEZER() Specification : WASHER SQUEEZER FOR NORMAL ARROW CHARGES TO DRG. NO. OFBA/RK/228 DATED 19/08/1985 R Estab
2) END WASHER WHITE Description : END WASHER WHITE() Specification : WASHER END WHITE NORMAL ARROW CHARGES TO DRG NO. OFBA/RK/221 DT.02.07.83 R Estab
Category : p
Grade : 1
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) THREAD PROTECTOR TO OFAJ DRG NO SM 952 Description : THREAD PROTECTOR TO OFAJ DRG NO SM 952() Specification : THREAD PROTECTOR TO OFAJ.DRG.NO.SM 952 C Estab
2) PROTECTOR FOR 2ND COPPER BAND TO OFAJ DRG NO SM 621C Description : PROTECTOR FOR 2ND COPPER BAND TO OFAJ DRG NO SM 621C() Specification : as per drawing C Estab
3) THREAD PROTECTOR TO OFAJ DRG NO SM 1170 FOR 125MM SHELL HE Description : THREAD PROTECTOR TO OFAJ DRG NO SM 1170 FOR 125MM SHELL HE() Specification : as per drawing C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) PLUG 52 MM FOR SHELL 130 MM HE[00]() Specification : AS PER DRG C Nonestab
2) NYLON RING TO CQA[00]() Specification : AS PER DRG C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) PROTECTOR FOR COPPER BAND AS PER OFAJ DRG. NO. SM-894 A.[00]() Specification : PROTECTOR FOR COPPER BAND AS PER OFAJ DRG. NO. SM-894 A. R Nonestab
2) THREAD PROTECTOR TO OFAJ DRG NO SM 952[00]() Specification : THREAD PROTECTOR TO OFAJ.DRG.NO.SM 952 C Nonestab
3) TRANSIT PLUG TO CQA AMMN DRG NO 155 1065[00]() Specification : TRANSIT PLUG TO CQA(AMMN)DRG.NO.155-1065,DC 36792-A DT. 01-11-01. C Nonestab
4) PLUG TO CQA A PART NO ISX 393[00]() Specification : as per Drawing C Nonestab
5) PROTECTOR FOR FIRST COPPER BAND TO OFAJ DRG NO SM 620C[00]() Specification : as per drawing C Nonestab
6) PROTECTOR FOR 2ND COPPER BAND TO OFAJ DRG NO SM 621C[00]() Specification : as per drawing C Nonestab
7) THREAD PROTECTOR TO OFAJ DRG NO SM 1170 FOR 125MM SHELL HE[00]() Specification : as per drawing C Nonestab
Category : p
Grade : Grade III
Size : S
3547 AUTO CLUTCHES
C-12, INDUSTRIAL ESTATE, SAGAR ROAD SHINOGA KARNATAKA
PIN1 : 577204
Phone No. : 07612743368 		577204A402

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHELL EMPTY APT - 30MM BMP-II (9911350550) Description : SHELL EMPTY APT - 30MM BMP-II (9911350550)() Specification : BODY WITH BAND ASSY TO DRG NO.bW 5.500.113 Cb/c DC NO - 34183-A DT.28-7-87. SPECN: PROGRAMME AND TEST PROCEDUREAS PER SHEET NO.bW 5.500.113 M/C (9 SHEETS)DC-34183-ADATED 28-07-87 C Estab
Category : p
Grade : 3
Size : S
3548 CMP PVT. LTD
EUCHARISTIC CONGRESS BUILDING III, 5 CONVENT STREET MUMBAI MAHARSHTRA
PIN1 : 400039
Phone No. : 07612743368 		400039C103

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SILVER NITRATE (1001712400) Description : SILVER NITRATE (1001712400)() Specification : SPECN:-IS-2214:1977 [FIRST REV] (Reaffirmed-2003). R Estab
2) ANODE COPPER LF 1582221281 Description : ANODE COPPER LF 1582221281() Specification : COPPER ANODE ROLLED SPECN:IS-2603-1983 (FIRST REVISION) (REAFFIRMED - 1998) IN SIZE OF 12" x 8" x 1/4" THICK. R Estab
Category : p
Grade : 3
Size : S
3549 JKEW FORGINGS LTD
AGARWALA BUILDING, THE MALL, KANPUR UP
PIN1 : 208004
Phone No. : 0000000000 		AAACJ3439M

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL FORGING TO FOR BLOCK FRONT OF MAG Description : STEEL FORGING TO FOR BLOCK FRONT OF MAG() Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Steel Forging Cylinder Gas Description : Steel Forging Cylinder Gas() Specification : Steel Forging Cylinder Gas SKM 306*5 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG C Estab
Category : p
Grade : 3
Size : S
3550 CHOKSEY CHEMICALS PVT.LTD.
111,INDUSTRIAL AREA,SION(E) MUMBAI MAHARASHTRA
PIN1 : 400022
Phone No. : 022-22838291 		AAACC6303K

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1003725586 POLY SULPHIDE SEALANT RDL 930 S Description : 1003725586 POLY SULPHIDE SEALANT RDL 930 S() Specification : POLY SULPHIDE SEALANT RDL-930S, NOTE: TO BE PACKED IN 250 GM CONTAINER. R Estab
Category : p
Grade : 3
Size : S
3551 ARCOTECH LTD
181,SECTOR-B INDUSTRIAL GROWTH CENTRE REWARI HARYANA
PIN1 : 123501
Phone No. : 07612743368 		0000TR3349

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) COPPER STRIP LF 0700464012 Description : COPPER STRIP LF 0700464012() Specification : COPPER STRIP 16+,-0.50 MM WIDE x 0.10+,-0.01 MM THICK IN COILS OF 9 METRES LONG SPECN: BS-2870-1980-C 104 CONDITION"H". R Estab
2) BRASS STRIP 28X0.5MM BS2870 CZ102 (0710291505) Description : BRASS STRIP 28X0.5MM BS2870 CZ102 (0710291505)() Specification : BRASS STRIP 28 +/-0.2 MM WIDE X 0.5+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BS-2870-1980,DESIG.CZ102,1/2H.HARDNESS 100-115 VPN.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS BOWINESS (MAX) 2MM/MTR.COIL WT.35-40KG,ID WITH NYLON RING30 R Estab
3) BRASS STRIP 22X1.02 MM (ITEM CODE: 0710664345) Description : BRASS STRIP 22X1.02 MM (ITEM CODE: 0710664345)() Specification : BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90 R Estab
4) BRASS STRIP 24X0.70MM JSS:9535-02 (0710665177) Description : BRASS STRIP 24X0.70MM JSS:9535-02 (0710665177)() Specification : BRASS STRIP 24+/-0.20 MM WIDE X 0.70+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN:JSS-9535-02-2008(REV.NO.3)HARDNESS 75-90HV.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS,BOWINESS (MAX) 2MM/MTR.COIL WT 35-40KG,ID WITH NYLON RING300MM MIN R Estab
5) BRASS STRIP 22X.7MM BS2870CZ106 1/4 (ITEM CODE: 0710665195) Description : BRASS STRIP 22X.7MM BS2870CZ106 1/4 (ITEM CODE: 0710665195)() Specification : BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD R Estab
6) BRASS STRIP 48X1.1MM BS2870 CZ108 (0710890346) Description : BRASS STRIP 48X1.1MM BS2870 CZ108 (0710890346)() Specification : BRASS STRIP 48 +/-0.40mm WIDE X 1.1 +/-0.02mm THICK IN COLD ROLLED CONDITION LENGTH 3 METRES IN COIL MIN SPECN : BS-2870 CZ-108, BRINELL HARDNESS : 80 - 120 R Estab
7) BRASS STRIP 132X0.4MM IS410 ZN30 O (0712590132) Description : BRASS STRIP 132X0.4MM IS410 ZN30 O (0712590132)() Specification : BRASS STRIP 132+/- 0.5 MM WIDE X 0.4 +/-0.025MM THICK TO SPECN.IS 410-1977 (REAFFIRMED 2006) (THIRD REVISION) WITHAMENDMENT NO.1 APRIL 1981 Cu Zn 30 CONDITION ANNEALED INCOIL. WEIGHT OF COIL NOT THAN 30 KG. I/D MINIMUM 100 MM. R Estab
8) BRASS STRIP 127X0.4MM IS410 ZN30 O (0712590159) Description : BRASS STRIP 127X0.4MM IS410 ZN30 O (0712590159)() Specification : BRASS STRIP 127+/-0.5 MM WIDE X 0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN:IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1APRIL-1981, CU ZN 30 CONDITION O (ANNEALED) R Estab
Category : p
Grade : 3
Size : S
3552 M. K. INDUSTRIES,
445, KOTWALI WARD, MILLONIGANJ, JABALPUR M.P.
PIN1 : 482002
Phone No. : 09827073055 		AAEFM7910P

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) 9911843271 PIECE PACKING B Description : 9911843271 PIECE PACKING B() Specification : AS PER OFBH SPECIFICATION R Estab
2) 9911846364 ENGAGING PLATE FOR BOX H2A Description : 9911846364 ENGAGING PLATE FOR BOX H2A() Specification : AS PER OFBH SPECIFICATION R Estab
Category : p
Grade : 3
Size : M
3553 NAROTTAMDAS& CO.
41,BABULBAN,GAROBA MAIDAN SHASTRI NAGER SQUARE NAGPUR MAHARASHTRA
PIN1 : 440008
Phone No. : 07612743368 		440008N721

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BORAX CRYSTAL PURE GRADE ITEM CODE 1001054123 Description : BORAX CRYSTAL PURE GRADE ITEM CODE 1001054123() Specification : SPECN.: IS-1109-1980 (2ND REV.) REAFFIRMED 1997 DC NO. 3777-ME DT. 25/09/03 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SODIUM META LF 1001720120 Description : SODIUM META LF 1001720120() Specification : SODIUM META BI-SULPHITE TECHNICAL,TO SPECN:- IS-248-1987 (FOUTH REVISION) R Estab
2) POTASSIUM NITRATE GRADE 2 ITEM CODE 1001621720 Description : POTASSIUM NITRATE GRADE 2 ITEM CODE 1001621720() Specification : POTASSIUM NITRATE GRADE - 2 FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN: IS-301-1982 ( 2nd REV) (REAFFIRMED 2003)DC NO 3810-ME DT 5/5/04 AMENDMENT NO.1 SEP.2003 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) INDUSTRIAL X RAY FILM 300MMX400MM LF 2513454033 Description : INDUSTRIAL X RAY FILM 300MMX400MM LF 2513454033() Specification : INDUSTRIAL X RAY FILM 300MMX400MM NDT65/D- 7 P Estab
Category : p
Grade : 3
Size : S
3554 POONA UDYOG
72/3, S BLOCK, MIDC, P.B.NO 14BHOSARI INDUSTRIAL ESTATE PUNE MAHARASTRA
PIN1 : 411026
Phone No. : 07612743368 		411026P004

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) CARTG PERCN PRIMARY 011200000000 LF 9911353312 Description : CARTG PERCN PRIMARY 011200000000 LF 9911353312() Specification : CARTG PERCEN PRIMARY FOR CLUSTER BOMB (EMPTY ASSY)TO DRG.NO.0112 00 00 00 00 R.NO.2 DT.15-6-96. SPECN:- ARDE/SPECN/380. C Estab
Category : p
Grade : 3
Size : S
3555 GLOBAL TRADING CORPORATION
859, MARSHALL HOUSE 33/1 N S ROAD KOLKATA WEST BENGAL
PIN1 : 700053
Phone No. : 07612743368 		0000TR3631

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHEET VALCANISED 300X3MM THICK ITEM CODE 2103681003 Description : SHEET VALCANISED 300X3MM THICK ITEM CODE 2103681003() Specification : SHEET VALCANISED CHLOROPRENE RUBBER COMPOUNDS (NEOPRENE) SIZE 300MMX300MMX3MM THICK HARDNESS. TO SPECN:- IND/ME/884:2015 DC NO 5403-ME DT 01/02/2016 COMPOUND NO. C -50 HARDNESS 50 (+5/-4) DEG BS. R Estab
Category : p
Grade : 3
Size : S
3556 UNITED RUBBER INDS PVT LTD
JAI VAILANKANI INDL ESTATE BHAYANDAR EAST MUMBAI MAHARASTRA
PIN1 : 401105
Phone No. : 02228145134 		MUMU00654D

Download 		1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) Sealing Ring Description : Sealing Ring() Specification : 20 01 51 1. C Estab
2) Flexible Hose Description : Flexible Hose() Specification : SB 3335-70 E Estab
3) Ring Description : Ring() Specification : 506-100 C Estab
4) FUEL PIPE LINE ASSY Description : FUEL PIPE LINE ASSY() Specification : SB 20-35-09-4 C Estab
Category : dp
Grade : 2
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) SENSING ELEMENT (EMPTY ASSEMBLY) Description : SENSING ELEMENT (EMPTY ASSEMBLY)() Specification : DRG. PT. NO. ITX-39A DC 35916A DT.21.02.95 SPECN. CQA(A)1817(t) DC 37096-A, DT.06.03.2007 WITH (1) DUST CUP DRG. PT. NO. ITX-283 DC 35597-A DT.06.10.93 = 01 NO. (2) FASTNER FOR SAFETY PIN CORD DRG. NO. ITX 284 DC 35916-A DT. 21.02.95 = 01 C Estab
Category : p
Grade : 3
Size : S
3557 THE ARASAN ALUMINIUM INDUSTRIES P LTD
102-A, Chairman. A.Shanmugam Road, SIVAKASI, Tamil Nadu, India - 626123 A.Shanmugam Road SIVAKASI Tamil Nadu
PIN1 : 626123
Phone No. : 7867000917
GSTIN : 33AAACT6771E1ZG 		MRIT00850D

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001017155 ALUMINIUM POWDER, HEAVY GR-1, SIZE 106 MICRON IS SIEVE Description : 1001017155 ALUMINIUM POWDER, HEAVY GR-1, SIZE 106 MICRON IS SIEVE() Specification : JSS-1370-03:2007 R Estab
2) 1001017178 POWDER ALUMINIUM HY250 MIC JSS 1370 Description : 1001017178 POWDER ALUMINIUM HY250 MIC JSS 1370() Specification : JSS 1370-03-2007 R Estab
Category : p
Grade : 3
Size : S
3558 LEATHER FABS
53, BRIJ BIHAR PHASE-II KAMALA NAGARA AGRA UTTAR PRADESH
PIN1 : 282005
Phone No. : 07612743368 		282005L001

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) CARRIER 11A ISV-468A FOR HE&ILLU(6573810100) Description : CARRIER 11A ISV-468A FOR HE&ILLU(6573810100)() Specification : CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIR C Estab
Category : p
Grade : 3
Size : S
3559 MARUTI TRIBROTECH
NEAR L.U.N IRON GODWEN INDUSTRIAL AREA RICHHAI JABALPUR MADHYA PRADESH
PIN1 : 482010
Phone No. : 07612743368 		0000TR4593

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PAINT TURQUOISEBLUE ISC102 IS168 SG LF 1011507102 Description : PAINT TURQUOISEBLUE ISC102 IS168 SG LF 1011507102() Specification : PAINT READY MIXED AMMN. AIR DRYING BRUSHING SEMI-GLOSSY FOR GENERAL PURPOSE TURQUIOISE BLUE ISC NO.-102 OF IS-5-2007(6TH REV) TO SPECN 1S-168-1993(REAFFIRMED 2002)(3RD REV) DC NO. DC NO.3685-ME DT 19/3/01 AS APPLICABLE FOR DEFENCE USE. R Estab
Category : p
Grade : 3
Size : S
3560 USHA ENTERPRISES
81 NETAJI SUBASH ROAD 2ND FLOOR KOLKATA WEST BENGAL
PIN1 : 700001
Phone No. : 03322424433 		CALU00263E

Download 		1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) WELDING ELECTRODE() Specification : As per OFDC Specification C Estab
2) CONTROLLER ASSY CARD() Specification : As per OFDC Specification C Estab
3) 400 AMPS INDI GENOUS INVERTER BASED 3 PHASE WELDING EQUIPMENT() Specification : As per OFDC Specification C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) WELDING ELECTRODE() Specification : As per OFDC Specification C Estab
2) CONTROLLER ASSY CARD() Specification : As per OFDC Specification C Estab
3) 400 AMPS INDI GENOUS INVERTER BASED 3 PHASE WELDING EQUIPMENT() Specification : As per OFDC Specification C Estab
Category : dp
Grade : 3
Size : S