List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
3621 Gisco Paints
24 Industrial Estate Adhartal Jabalpur Madhya Pradesh
PIN1 : 482004
Phone No. : 2680248
GSTIN : 23AAEFG3400E1Z8 		AAEFG3400E

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 1001729903 THINNER PAINT TURPEN SPIRIT WHITE[10]() Specification : THINNER PAINT (TURPENTINE SUBSTITUTE) AMMN. TO SPECN. NO.JSS 8010-26:2009,(REVISION NO.2) DC NO.3978-ME DT.24.09.2009 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1011318631 PAINT LIGHT GREY MATT FINISH GEN PU[10]() Specification : IS-168:1993 R Estab
2) 1011337356 PAINT GOLDEN YELLOW SGF IS 138 1992[10]() Specification : IS-138-1992 R Nonestab
3) 1011337001 PAINT STENC BLACK SGF IS 138 1992[10]() Specification : SPECN IS-138-1992 R Nonestab
4) 1011318632 EPOXYACRYLIC A C GREY PAINT[10]() Specification : EPOXYACRYLIC POLYSILOXINE ENAMEL A.C. GREY PAINT FOR PINAKA ROCKET R Nonestab
5) 1011300007 PALE YELLOW PAINT SPECN IS 5 2004[10]() Specification : IS-5:2007, ISC NO.356 TO IS: 138 R Nonestab
6) 1011308001 PAINT BLACK SGF GENERAL PURPOSE[10]() Specification : IS:168-1993 R Nonestab
7) 1011307225 PAINT LIGHT BRUNSWICK GREEN SGF[10]() Specification : IS: 168-1993 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1001670209 PAINT RED OXIDE ORTHO XYLENE BASED[10]() Specification : PAINT READY MIXED AIR DRYING, MATT, ORTHOXYLENE BASED ZINCCHROME REDOXIDE SPRAYING/BRUSHING/DIPPING/POUR APPLICATIONFOR INNER COATING OF HE SHELLS TO SPECN. IND/ME/964 (PROV)DC-3214-ME DT. 14/12/94.IN PACK.OF 1/2 LIT.CAP. R Nonestab
2) 1011308225 PAINT LIGHT BRUNSWICK GREEN MATT[10]() Specification : PAINT READY MIXED AIR DRYING MATT FINISH LIGHT BRUNSWICKGREEN FOR GENERAL PURPOSE ISC 225 OF IS 5-1994 (FOURTH REVI-SION) (AMDT.-1) TO SPECN IS 168-1993 (THIRD REVISION)AS APPLICABLE FOR DEFENCE USE. MODE OF APPLICATION-SPRAYING/BRUSHING R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1011300356 PAINT GOLDEN YELLOW[10]() Specification : PAINT GOLDEN YELLOW R Nonestab
2) 1011002001 PAINT RFU AMMN ANTI CORROSIVE BLACK[10]() Specification : PAINT RFU AMMUNITION BITUMINOUS BRUSHING,ANTI CORROSIVE,BLACK TO SPECIFICATION NO. JSS 8010-24:2014 (REV NO.3) R Nonestab
3) 1012709537 PAINT SYNTH ENAMEL SIGNAL RED[10]() Specification : PAINT SYNTHETIC,ENAMEL,EXTERIOR,BRUSHING FINISHING 1ST QUALITY TO IS SPECIFICATION,AS PER IS NO.2932-1993.SHADE SIGNALRED PACKED IN 4 LITRES SEALED CONTAINER.MAKE:- ASIAN / J&N / BERGER / NEROLAC. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1011312359 PAINT BUFF MIDDLE SGF GEN TO IS-168[10]() Specification : SPECN IS:5-1994 (FOURTH REVISION) WITH AMENDMENT NO. 1 TO SPECN. IS:168-1993 (THIRD REVISION) R Estab
2) 1011001001 PAINT BLACK ACID PROOF SPRAYING[10]() Specification : SPECIFICATION IND/ME/651(A) R Nonestab
3) 1011312220 PAINT OLIVE GREEN MATT FINISH[10]() Specification : OF ISC-220 OF IS-5-1994 (FOURTH REVISION) REAF.2000 AMND NO.1.TO SPECN. IS-168-1993 THIRD REVISION R Estab
4) 1011312446 PAINT RED OXIDE MATT FINISH GEN PUR[10]() Specification : ISC 446 OF IS: 5- 1994 (FOURTH REVISION) (AMDT-1) TO SPECN IS: 168-1993 (THIRD REVISION) R Nonestab
5) 1011518001 PAINT BLACK MATT FINISH SPRAYING[10]() Specification : SPECN. IS:168-1993 (THIRD REVISION) REAFFIRMED-2002 (AS APPLICABLE FOR DEFENCE USE) R Nonestab
6) 1011714447 PAINT RED OXIDE ZINC CHROME IS 1874[10]() Specification : IS:1874:1992 R Estab
7) 1011337012 PAINT WHITE MARKING STENCILING SGF[10]() Specification : IS: 138- 1992 R Nonestab
8) 1011535537 PAINT STENC RED SIGNAL IS 138 1992[10]() Specification : IS: 138 -1992 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) PAINT R/M A/D O.GREEN ISC-220 Description : PAINT R/M A/D O.GREEN ISC-220() Specification : AS PER O.F. BHUSAWAL REQUIREMENT/SPECIFICATION R Estab
2) 1013400300 VARNISH SHELLAC 30 PERCENT APC 225 Description : 1013400300 VARNISH SHELLAC 30 PERCENT APC 225() Specification : AS PER OFBH SPECIFICATION R Estab
3) 1011308537 PAINT RM AD SIGNAL RED Description : 1011308537 PAINT RM AD SIGNAL RED() Specification : AS PER OFBH SPECIFICATION R Estab
4) 9911841939 BLACK BOARD PAINT Description : 9911841939 BLACK BOARD PAINT() Specification : 9911841939 BLACK BOARD PAINT R Estab
5) 9911839804 PAINT STOV ENAMEL GOLDEN YELLOW Description : 9911839804 PAINT STOV ENAMEL GOLDEN YELLOW() Specification : AS PER OFBH SPECIFICATION R Estab
6) 1011300099 PAINT RFU ALUMINIUM Description : 1011300099 PAINT RFU ALUMINIUM() Specification : AS PER OFBH SPECIFICATION R Estab
7) 1010927002 PAINT RM AD PURE WHITE Description : 1010927002 PAINT RM AD PURE WHITE() Specification : AS PER OFBH SPECIFICATION R Estab
8) 9911844697 PAINT WHITE TO SPECN IS168 Description : 9911844697 PAINT WHITE TO SPECN IS168() Specification : 9911844697 PAINT WHITE TO SPECN.IS:168-19, R Estab
9) 9911833896 PAINT RFU OLIVE GREEN ISC 294 Description : 9911833896 PAINT RFU OLIVE GREEN ISC 294() Specification : AS PER OFBH SPECIFICATION R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) PAINT READY MIXED Description : PAINT READY MIXED() Specification : AS PER REQUIREMENT C Estab
2) VARNISH OIL STOVING (APC-221 GR-I) Description : VARNISH OIL STOVING (APC-221 GR-I)() Specification : AS PER REQUIREMENT C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) PAINT READY MIXED Description : PAINT READY MIXED() Specification : AS PER REQUIREMENT C Estab
2) VARNISH OIL STOVING (APC-221 GR-I) Description : VARNISH OIL STOVING (APC-221 GR-I)() Specification : AS PER REQUIREMENT C Estab
Category : dp
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PAINT RM STEN SGF GOLDEN YELLOW() Specification : IS 138-1992 3RD REV.WITH A.NO.1 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) READY MIXED PAINT AIR DRYING WHITE SEMIGLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECN. IS: 168-1993 (THIRD REVISION) Description : READY MIXED PAINT AIR DRYING WHITE SEMIGLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECN. IS: 168-1993 (THIRD REVISION)() Specification : READY MIXED PAINT AIR DRYING WHITE SEMIGLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECN. IS: 168-1993 (THIRD REVISION) P Estab
2) PAINT READY MIXED AIR DRYING SEMI Description : PAINT READY MIXED AIR DRYING SEMI() Specification : PAINT READY MIXED SPRAYING AIR DRYING SEMI GLOSSY FINISHED LIGHT BRUNSWICK GREEN FOR GENERAL PURPOSE ISC: 225 OF IS: 5-1994 (4TH REV.) AMMENDMENT NO. 1 TO SPECN IS: 168/1993 ( 3RD REV.) AS APPLICABLE FOR DEFENCE USE. P Estab
Category : p
Grade : 2
Size : S
1) High Explosive Factory

[Deemed Registration]
Name Specification Use Status
1) PAINT RM STENS GF Description : PAINT RM STENS GF() Specification : IS: 138-1992 (THIRD REV) REAFF 2014, WITH A.NO.1 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT FINISH WITH GLOSS VALUE 31 TO 50 R Estab
2) PAINT RFU FINI AMMN Description : PAINT RFU FINI AMMN() Specification : SPECN IS: 168 - 1993 3RD REV REAFF. 2012 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLAUSES AS PER CQA (ME) KIRKEE LETTER NO. CQA/ME/7209/UPS DT 16.02.89 AND CQA/ME 7209/UPS/2 DT 24.10.90 R Estab
Category : p
Grade : 3
Size : S
3622 A.S.HASANALI & CO.
37, KOLSA STREET, PYDHONIE MUMBAI MAHARASTRA
PIN1 : 400003
Phone No. : 07612743368 		400003A107

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) WIRE LEAD ANT 5 66TO 5 74MM JSS9530 LF 0811200005 Description : WIRE LEAD ANT 5 66TO 5 74MM JSS9530 LF 0811200005() Specification : LEAD ANTIMONY ALLOY WIRE 5.66 MM TO 5.74 MM DIA WITH 1.8 TO 2.2%ANTIMONEY TO SPECN:JSS-9530-02-1996(REV.NO.2)(REAFFIRMED-2008)(PbSb-2). MATERIAL TO BE SUPPLIED IN REEL FORM, EACH WEIGHING 45 TO 50 KGS. R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) LEAD SHEET 50X2MM IS:405 PT.II-1992 (0800160901) Description : LEAD SHEET 50X2MM IS:405 PT.II-1992 (0800160901)() Specification : LEAD SHEET 50+/-0.635 MM WIDE X 2+/- 0.05 MM THICK TO SPECN:IS-405 (PT-II)-1992 (3RD REVISION) IN ROLLED CONDITION R Estab
2) LEAD TIN FOIL 0 0381MM THK FOR 76 2 LF 0825260381 Description : LEAD TIN FOIL 0 0381MM THK FOR 76 2 LF 0825260381() Specification : LEAD TIN FOIL 57.15CM x 34.30CM x0.0381MM +/-0.0127 MM THICKTO SPECN.JSS:9535-06:2010 REV.2 REFFIRMED 2016 DC NO.6002-MEDTD.24-09-2016. R Estab
3) LEAD TINFOIL LF 0825260901 Description : LEAD TINFOIL LF 0825260901() Specification : LEAD TIN FOIL 57.15CM x 34.30CM x0.0381MM +/-0.0127 MM THICK(Sn (TIN) 4 TO 5%, Sb (ANTIMONY) 1% MAX, Pb (LEAD) REMAINDERTO SPECN: BS/STA-7/LX-1/1 R Estab
4) LEAD TINFOIL LF 0825290000 Description : LEAD TINFOIL LF 0825290000() Specification : LEAD TIN FOIL 17.78 CM+/-0.0635CM x 0.07MM +/-0.013MM THICK x 57.15CM LONG SPECN:-JSS 9535-06:2010(REVISION NO.2) DC NO.4085-ME DT.08/09/2010. R Estab
5) LEAD TIN FOIL LF 0832260905 Description : LEAD TIN FOIL LF 0832260905() Specification : FOIL TIN/LEAD TO SPECN.JSS-9535-06:2010(REV.NO.2) APPROXIMATE 122MM LONG 25.4MM WIDE 0.05MM THICK WRAPPEDROUND CHARGE. R Estab
Category : p
Grade : 3
Size : S
3623 Nidhi Enterprises
C-block vikas nagar meerut road street no. 3 Ghaziabad Uttar Pradesh
PIN1 : 201003
Phone No. : 2870140 		AMUPK6726D

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) DISC TO CQA AMMN DRG NO QX 336 DC 35434 A DT 30 12 92 Description : DISC TO CQA AMMN DRG NO QX 336 DC 35434 A DT 30 12 92() Specification : DISC TO CQA(AMMN) DRG.NO. QX-336, DC-35434-A DT. 30.12.92 C Estab
Category : ddp
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) SEMI MACHINED UNION RING US 939211001 Description : SEMI MACHINED UNION RING US 939211001() Specification : SEMI MACHINED UNION RING TO DRG NO. US-939211001 R Estab
Category : p
Grade : 3
Size : S
3624 SWASTIK ACIDS AND CHEMICALS
BEHIND ARAFAT HOTEL CHANDRASHEKAR AZAD SQUARE NAGPUR Maharashtra
PIN1 : 440032
Phone No. : 2764908
GSTIN : 27AAGFS0979Q1ZB 		AAGFS0979Q

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Basic Lead Stearate Description : Basic Lead Stearate() Specification : JSS 6810 -145:2017( Revision No 2) R Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001010101 ACETONE TO SPECN.IS-170-1986(3RDRV) Description : 1001010101 ACETONE TO SPECN.IS-170-1986(3RDRV)() Specification : SPECN NO.IS:170-1986 R Estab
2) 1001010305 ACID ACETIC GLACIAL AR IS 695 1986 Description : 1001010305 ACID ACETIC GLACIAL AR IS 695 1986() Specification : SPECN: ACID ACETIC GLACIAL AR.TO IS - 695-1986 R Estab
3) 1001710323 ACID ACETIC TO IS 695 1986 Description : 1001710323 ACID ACETIC TO IS 695 1986() Specification : IS:695-1986 R Estab
4) 1001012146 ACID NITRIC AR GRADE 69 PERC Description : 1001012146 ACID NITRIC AR GRADE 69 PERC() Specification : IS-264-1976 R Estab
5) 1001021403 AMYL ACETATE TO SPECN IS 231 1957 Description : 1001021403 AMYL ACETATE TO SPECN IS 231 1957() Specification : IS-231-1957 R Estab
6) 1001054123 BORAX, IS : 1109-1980 Description : 1001054123 BORAX, IS : 1109-1980() Specification : SPECN: BORAX TO IS: 1109-1980 (SECOND REVISION) R Estab
7) 1001721006 CAUSTIC SODA TECH FLAKE IS 252 1991 Description : 1001721006 CAUSTIC SODA TECH FLAKE IS 252 1991() Specification : IS-252-1991 R Estab
8) 1004090814 COPPER NAPTHENATE IS 1078 1987 Description : 1004090814 COPPER NAPTHENATE IS 1078 1987() Specification : IS-1078 :1987 R Estab
9) 1001101900 COPPER SULPHATE IS 261 1982 2ND REV Description : 1001101900 COPPER SULPHATE IS 261 1982 2ND REV() Specification : COPPER SULPHATE TO SPECN. IS: 261- 1982 (SECOND REVISION) (AMMENDMENT NO.1) REAFFIRMED - 1999 R Estab
10) 1003134010 DESMODUR -RE Description : 1003134010 DESMODUR -RE() Specification : DESMODUR "RE"(20% SOLUTION OF TRIPHENYL-METHANE 4 4' 4" TRI ISO CYANATE IN METHYLENE CHLORIDE). R Estab
11) 1001773703 DICHLOROMETHANE Description : 1001773703 DICHLOROMETHANE() Specification : ARDE/SPECN/PINAKA/RKT-08 ISSUE 02 OF JULY 2015 R Estab
12) 1001174515 ETHYL ACETATE SPECN IS 229 72 Description : 1001174515 ETHYL ACETATE SPECN IS 229 72() Specification : ETHYL ACETATE GRADE-2 TO SPECIFICATION NO.IS-229-1993(THIRDREVISION). R Estab
13) 1001253905 GLYCERINE PURE AR Description : 1001253905 GLYCERINE PURE AR() Specification : IS:1796-1986 AR GRADE R Estab
14) 1001410113 KAOLIN TO SPECN JSS 9620 02 2001 Description : 1001410113 KAOLIN TO SPECN JSS 9620 02 2001() Specification : JSS 9620 -02: 2001 R Estab
15) 1001055802 NORMAL BUTYL ALCO TECH IS 361 1973 Description : 1001055802 NORMAL BUTYL ALCO TECH IS 361 1973() Specification : IS: 361-1973 R Estab
16) 1001621767 POTASSIUM NITRATE GR 1 125 MICRON Description : 1001621767 POTASSIUM NITRATE GR 1 125 MICRON() Specification : POTASSIUM NITRATE GR 1 SIZE 125 MICRON ( 98% MINIMUM )TO SPECIFICATION NO. IS: 301-1982 (SECOND REVISION)RE-AFFIRMED 1988 R Estab
17) 1004612403 POWDER TALC FRENCH CHALK TO SPECN Description : 1004612403 POWDER TALC FRENCH CHALK TO SPECN() Specification : IND/ME/236 R Estab
18) 1001717031 SODIUM CARBONATE ANHYD IS 296 1974 Description : 1001717031 SODIUM CARBONATE ANHYD IS 296 1974() Specification : SODIUM CARBONATE,ANHYDROUS PURE GRADE TO SPECN.IS-296-1986 (THIRD REVISION) REAFFIRMED -1996 R Estab
19) 1001671045 ROSIN() Specification : IS: 553-84(EXETRA PALE) R Estab
20) 1001722406 SODIUM NITRITE Description : 1001722406 SODIUM NITRITE() Specification : JSS 6810-104:1993 R Estab
21) 1001730830 STARCH WHITE GR II IND ME 459 Description : 1001730830 STARCH WHITE GR II IND ME 459() Specification : STARCH WHITE GR.II AMMUNITION TO SPECIFICATION NO.IND/ME/459(C) DC NO. 3754 -ME . R Estab
22) 1001905635 XYLOLE IS 359 1965 REVISED Description : 1001905635 XYLOLE IS 359 1965 REVISED() Specification : IS: 359-1965 R Estab
Category : s
Grade : 3
Size : S
1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) POTASSIUM NITRATE GR I Description : POTASSIUM NITRATE GR I() Specification : POTASSIUM NITRATE GR.I FOR EXPL & PYRO TECHNIC COMPOSITION SIZE -ALL PASSING THRO' 125 MICRO M IS SIEVE SPECN:IS:301-1982(2nd REV.) AMENDS 1 REAFFIRMED.2016 AN 6810-021A:2010 (REV.2)REAFFIRMED 2016 R Estab
2) CALCIUM CARBONATE Description : CALCIUM CARBONATE() Specification : CALCIUM CARBONATE FOR EXPLOSIVES TYPE II PRECIPITATED MATERIAL RETAINED ON 90 MICRON IS SIEVE - NIL (PERCENT BY MASS) FOR USE IN PROPELLANTS SPECN: IS 7633 - 1982 REAFFIRMED 2016. (FIRST REVISION) AMENDMENT NO. 1 DC 5372-ME DT.28-07-2015 R Estab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001720721 SODIUM HYDROXIDE PELLETS AR IS 376 Description : 1001720721 SODIUM HYDROXIDE PELLETS AR IS 376() Specification : IS: 376-1986 R Estab
Category : s
Grade : 3
Size : S
3625 Hoops & Strips Pvt.Ltd
23 A , Netaji Subhas Road, 2nd Floor, Room No.15, Kolkata Netaji Subhas Road Kolkata West Bengal
PIN1 : 700001
Phone No. : 03322312621
GSTIN : 19AAACH6687B1ZH 		CALH01926B

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL TAPE BAND 12 7X0 45MM ITEM CODE 0133060104 Description : STEEL TAPE BAND 12 7X0 45MM ITEM CODE 0133060104() Specification : COLD ROLLED STEEL STRIP (STEEL TAPE BANDING) 12.7 MM WIDTH X 0.45MM THICK(26SWG) IN C.R.STEEL STRIPPING SOFT BLUE FINISHHAVE TENSILE STRENGTH 60 TO 80KG/MM SQR WITH SHEAR EDGE IN COIL,OILED WITH SHELL EXISTS 256 WITH WAXED PAPER AND RESI R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6330301300 MS TARGET BLOCK FOR 30 MM CHARGE Description : 6330301300 MS TARGET BLOCK FOR 30 MM CHARGE() Specification : MS TARGET BLOCK FOR PROOF OF 30 MM SHAPED CHARGE (SIZE DIA300 MM X 100 MM) & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF09/2008, MATERIAL SPECN. IS-2062:1999. C Estab
2) 0801789173 SEAL LEAD SIZE 10 MM DIA Description : 0801789173 SEAL LEAD SIZE 10 MM DIA() Specification : SPECN. IS: 13923- 1993 (AMDT. 1) REAFFIRMED-1997 C Estab
3) 0101012130 SEAL TO DRG NO. 6390 155 RE 1 Description : 0101012130 SEAL TO DRG NO. 6390 155 RE 1() Specification : SPECN NO. IS-5872-1990 C Estab
4) 0800520002 SHEET LEAD 2440MMX1220MMX2MM THICK. Description : 0800520002 SHEET LEAD 2440MMX1220MMX2MM THICK.() Specification : SPECN.IS-405 (PART-1):1992 (THIRD REV.) C Estab
5) 0134071133 SHEET M S 2500 Description : 0134071133 SHEET M S 2500() Specification : IS:513-1994 C Estab
6) 0145060016 SHEET MILD STEEL 1830X915 Description : 0145060016 SHEET MILD STEEL 1830X915() Specification : IS-513-1994 C Estab
7) 0615462080 STRIP AL 19 MM WIDE Description : 0615462080 STRIP AL 19 MM WIDE() Specification : IS-737-1986 GRADE 19000 C Estab
8) 0615361123 STRIP AL 51 MM WIDE Description : 0615361123 STRIP AL 51 MM WIDE() Specification : BS 1470-1987-SIA "O" OR SIB "O" OR IS-737-1986 GRADE 19000 CONDITION "O". C Estab
9) 0615461129 STRIP ALUMINIUM Description : 0615461129 STRIP ALUMINIUM() Specification : IS-737-1986,3RD REVISION C Estab
10) 0615463168 STRIP AL 20 MM WIDE Description : 0615463168 STRIP AL 20 MM WIDE() Specification : IS-737-1986 C Estab
11) 0615458005 STRIP ALUMINIUM 130MM Description : 0615458005 STRIP ALUMINIUM 130MM() Specification : ALUMINIUM ALLOY STRIP, SIZE:130 MM PLUS MINUS 0.5 MM WIDE X0.5 MM PLUS MINUS 0.02 MM THICK TO SPECIFICATION IS:737-2008 (FOURTH REVISION) GRADE 19500 IN CONDITION HX4. C Estab
12) 0145061109 STRIP ST.COLD ROL 0.5MM THX190 MM W Description : 0145061109 STRIP ST.COLD ROL 0.5MM THX190 MM W() Specification : SPECN.IS: 513-1994 (FOURTH REVISION) (AMDT.1) R.A-1998, C Estab
13) 0145060115 STRIP STEEL Description : 0145060115 STRIP STEEL() Specification : IS-1079-1994 C Estab
14) 0832270092 STRIP TIN Description : 0832270092 STRIP TIN() Specification : SPECN: SEAL TIN (FOR STEEL TAPE BANDING SIZE 12.7 MM WIDE). APPRX. SIZE 25.41 MM LENGTH X 12.7 MM WIDTH X 0.3 MM THICK AND BEND OF 90 DEGREE ANGLE BOTH SIDE LONGITUDINALLY WITH HEIGHT 6.3 MM. C Estab
15) 0103060008 TAPE STEEL Description : 0103060008 TAPE STEEL() Specification : IS-5872-1990. GRADE-2. C Estab
16) 0101013091 WIRE GI SOFT 20 SWG Description : 0101013091 WIRE GI SOFT 20 SWG() Specification : IS: 280-1978 C Estab
17) 0103060078 TAPE STEEL Description : 0103060078 TAPE STEEL() Specification : SPECN.IS:5872-1990-GRADE-2 IN COIL FORM AND SUITABLY RUST PROOFED. C Estab
Category : p
Grade : 3
Size : S
3626 VIDARBHA PAPER & BOARD INDUSTRY , YAVATMAL INDIA -
OPPOSITE TILAK SMARAK MANDIR, CIVIL LINES YAVATMAL MAHARASHTRA
PIN1 : 445001
Phone No. : 07232238205 		AHOPA5350Q

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1421006728 MILL BOARD Description : 1421006728 MILL BOARD() Specification : JSS 9310-01: 2007 R Estab
2) 1421006729 MILL BOARD 787 X 559 MM Description : 1421006729 MILL BOARD 787 X 559 MM() Specification : JSS 9310-01: 2007 R Estab
3) 1421014628 MILL BOARD Description : 1421014628 MILL BOARD() Specification : JSS 9310-01:2007 R Estab
4) 1421060045 MILL BOARD Description : 1421060045 MILL BOARD() Specification : JSS 9310 - 01 : 2007 R Estab
5) 1421203128 MILL BOARD GEN Description : 1421203128 MILL BOARD GEN() Specification : JSS 9310-01: 2007 R Estab
6) 1421203628 MILL BOARD 559 MM CUP Description : 1421203628 MILL BOARD 559 MM CUP() Specification : JSS 9310-01:2007 R Estab
7) 1421203828 MILL BOARD 787 X 559 MM Description : 1421203828 MILL BOARD 787 X 559 MM() Specification : JSS 9310-01:2007 R Estab
8) 1421204045 MILL BOARD GEN Description : 1421204045 MILL BOARD GEN() Specification : JSS 9310-01: 2007 R Estab
9) 1421233128 MILL BOARD CUP Description : 1421233128 MILL BOARD CUP() Specification : JSS 9310-01:2007 R Estab
10) 1421278793 MILL BOARD SZ 787 Description : 1421278793 MILL BOARD SZ 787() Specification : JSS 9310-01:2007 R Estab
11) 1422000019 BOARD GLAZED CALENDERED AMMUINITION Description : 1422000019 BOARD GLAZED CALENDERED AMMUINITION() Specification : JSS 8135-13:2007 R Estab
12) 1422000028 GLAZED BOARD Description : 1422000028 GLAZED BOARD() Specification : JSS 8135-13:2007 R Estab
Category : p
Grade : 3
Size : S
3627 BOMBAY PIPE TRADERS
19, PAPULAR MARKET GANDHI BAGH NAGPUR MAHARASHTRA
PIN1 : 440002
Phone No. : 9011060110 		AAAFB6703D

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1003020120 HARDNER HV953 FOR EPOXY RESIN Description : 1003020120 HARDNER HV953 FOR EPOXY RESIN() Specification : IND/ME/924 (PROV) R Estab
2) 1003022000 EPOXY RESIN Description : 1003022000 EPOXY RESIN() Specification : IND/ME/924 (PROV.); R Estab
Category : s
Grade : 3
Size : S
3628 CHEMOX INDUSTRIAL CORPN.
VATSA HOUSE, NOBLE CHAMBERS, 4TH FLOOR, JANMABHUMI MARG MUMBAI MAHARASHTRA
PIN1 : 400001
Phone No. : 022-22870133 		AAAFC2421M

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1003050800 DISPERSANT AROMATIC SULPHONIC ACID Description : 1003050800 DISPERSANT AROMATIC SULPHONIC ACID() Specification : DISPERSANT, AROMATIC SULPHONIC ACID (BELLOID TD ACID) CONDENSA TE, ANIONIC,COLLOID PROTECTIVE (COMPATIBLE WITH ALL NON-IONIC AND ANIONIC ACTIVE COMPOUNDS). R Estab
Category : p
Grade : 3
Size : S
1) High Explosive Factory

[Deemed Registration]
Name Specification Use Status
1) BELLOID TD / RANOID TD Description : BELLOID TD / RANOID TD() Specification : CLAUSES (A) PHYSICAL APPEARANCE : BROWN POWDER (B) PH OF 5% SOLUTION 6 TO 7 (C) SOLUBILITY OF 5% SOLUTION : CLEAR LIQUID (D) SULPHATED ASH : 35 TO 42 % (E) SODIUM SULPHATE : 15% MAX (F) MOISTURE CONTENT : NIL (G) ACTIVE INGRADIENT IN TERM R Estab
Category : p
Grade : 2
Size : S
3629 A P LMEC SYSTEMS
Plot No 195/1, Phase II IDA Cherlapally, Hyderabad Telangana, 500051 Phase II IDA Cherlapally Hyderabad Telangana
PIN1 : 500051
Phone No. : 04027121538
GSTIN : 36AAEFA2654R1Z1 		AAEFA2465R

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6333800330 PLUG WITH FILAMENT BRIDGE BUSHING Description : 6333800330 PLUG WITH FILAMENT BRIDGE BUSHING() Specification : PLUG TO DRG. PART NO. IQX 975 & BUSHING TO DRG. PART NO.IQX 976 TO DESIGNERS REF. OST-B 84-409-79. C Estab
Category : s
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SPACER RING DRG.NO.04-749-130222-03() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E R Estab
2) SQUIB PLUG TO DRG. NO. ERDL DRG 897, DET NO. 7() Specification : DRG. NO. ERDL DRG 897, DET NO. 7 R Estab
3) BODY TO DRG ERDL 898 PC 100 DQ() Specification : ERDL DRG. 898 DET 1 DT. 18/1/94. (PC-100 DQ) R Estab
4) RING TO DRG NO 897 DET NO 2() Specification : ERDL DRG 897 DET NO 2 DT. 18/1/94 R Estab
5) CUP TO DRG NO 897 DET NO 3() Specification : DRG NO ERDL DRG 897 DET NO 3 DT. 17/1/84 R Estab
6) COMPONENTS FOR PYRO CTG YDP 4-2() Specification : DRG. NO. NASK 1016 ( PROVISIONAL ) R Estab
7) BODY AND CUP() Specification : 1) BODY (IGNITER FOR FOREMOTOR) DRG.NO.NAI(V) 8014/1 (PROV) DT. 26/08/09 - 1 NO. 2) CUP (IGNITER FOR FOREMOTOR) DRG. NO.NAI(V) 8014/2 ( PROV) DT. 4/9/01 - 1 NO. R Estab
8) PYRO CARTG.YDP 3-3 DRG.NASK 995.() Specification : DRG. NO. NASK 995 (PROV) DT.02.12.2008 R Estab
9) PYRO CARTG.YDP 1-3 DRG.NAI(MB)9553() Specification : DRG. NO. NASK 994 (PROV) DT.03-07-2008 R Estab
10) SLEEVE TO DRG ERDL 897 DET 4() Specification : DRG NO ERDL DRG. 897 DET 4 DT. 8/4/92 R Estab
11) SCREW DRG ERDL 897 DET 5() Specification : DRG. NO. ERDL DRG. 897 DET. 5 DT. 9-7-90 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) PYRO CARTRIDGE HOLDER ASSY.FOR SPC(5B-29) Description : PYRO CARTRIDGE HOLDER ASSY.FOR SPC(5B-29)() Specification : AS PER SKETCH NO. 220 OF NAI JABALPUR R Estab
Category : ddp
Grade : 1
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BODY FOR BOMB 51 MM MORTAR HE 2A[60]() Specification : CQA(A)- 2322 C Nonestab
2) BOMB 81MM HE MORTAR C EMPTY[60]() Specification : CQA (A) 2305 & L 8638-J C Nonestab
3) BOMB 81MM MORTAR B EMPTY BODY[60]() Specification : CQA(A) 2304 & L 8638-J C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SQUIB ASSY.EMPTY DRG.NO.ERDL 959[6482720100]() Specification : DRG. NO ERDL 959 DET. 4 DT 14-09-76 C Nonestab
2) SQUIB ASSY (EMPTY) FOR PYRO CTG.[60]() Specification : NASK 856 (PROVISIONAL) C Nonestab
3) SET OF PYRO SQUIB OPERATOR II-253ME[6099990159]() Specification : DRG .NO. NASK--- 1089/1 (PROV.) C Nonestab
4) SQUIB PLUG BRIDGED FOR IGNITER[6099990231]() Specification : DRG. NO. ERDL,1164 DET. 2 C Nonestab
5) COMPONENTS FOR SQUIB PSQ 6[6099990236]() Specification : 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG. NO. PTA-L-54-01-01-103-X C Nonestab
6) BRIDGED SQUIB[6099990414]() Specification : DRG. NO. ERDL; 1320 DET. NO. 5. FOR SAM 5B-87 DT. 09.10.98 C Nonestab
7) SQUIB (EMPTY) FOR IGNITER EB-2[6099990423]() Specification : DRG.NO. AFK-SK-343-06 DT.02.02.2006 C Nonestab
8) SQUIB HOLDER DRG.NO. AFK/SK-334-06][6099991378]() Specification : DRG. NO. AFK/SK-334-06 R Nonestab
9) SQUIB HOLDER - DRG.NO. AK/SK-303-05[6099999066]() Specification : DRG. NO. AFK/SK - 303-05 SHEET NO. 3/3 DT.27.11.2014 C Nonestab
10) MFG OF L.T SQUIB. DRG NO ERDL 563.[9610100327]() Specification : DRG.NO.ERDL 563 DET NO. 7 DATE 9.6.89 C Nonestab
11) CHARGES FOR MISC JOB FOR LT SQUIB[9610101654]() Specification : DRG NO.ERDL-1046 DET-2. Dt. 19.11.2009 R Nonestab
12) SQUIBS TO DRG NO.ERDL 1004 DET NO.1[99]() Specification : ERDL SPECN NO. ERDL/PYRO/PS/145 C Nonestab
13) SQUIB PLUG DET.ELEC.82 MK IN2[64]() Specification : DRG. NO. HEMRL DRG. 1443 DET. NO. 8 DT. 25.11.97 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) COMPONENTS FOR PYRO CTG YDP 4-2[60]() Specification : DRG. NO. NASK 1016 ( PROVISIONAL ) C Nonestab
2) PYRO CARTG.YDP 3-3 DRG.NASK 995.[6099991225]() Specification : DRG. NO. NASK 995 (PROV) DT.02.12.2008 C Nonestab
3) PYRO CARTG.YDP 1-3 DRG.NAI(MB)9553[60]() Specification : DRG. NO. NASK 994 (PROV) DT.03-07-2008 R Nonestab
4) SET OF COMPONENTS FOR PYRO CARTRG.[60]() Specification : DRG ERDL 898 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CUPS TO DRG NO ARDE 2043 DET NO 5[60]() Specification : CQA(A) 2804 R Nonestab
2) BODY FOR PYRO CARTG PP9 PC[6099000007]() Specification : DRG, NO. NASK 855/1 (PROVISIONAL) C Nonestab
3) PROTECT COVER DRG.NO. NASK/776/9/2[6099990297]() Specification : DRG. NO. NASK 776/9/2 (PROVISIONAL) DT.11-08-99. C Nonestab
4) LUG DRG. NO. AFK/SK - 303-05[6099999068]() Specification : AFK/SK - 303-05 SHT. 1 OF 3 DT. 11.11.2005 PART. 4 C Nonestab
5) BODY TO DRG.ERDL 959 DET NO.1[9910140185]() Specification : DRG.NO.ERDL DRG. 959 DET NO.1 DT.11 NOV 86 C Nonestab
6) CUP TO ERDL DRG 1005 DET NO.2 MRECM[9910141615]() Specification : DRG.NO.ERDL DRG.1005 DET NO 2 DT.19.11.2009 C Nonestab
7) LID ERDL DRG NO 1005 DET NO.7 MRECM[99]() Specification : DRG.NO. ERDL DRG 1005 DET NO.7 DT.19.11.09 C Nonestab
8) COVERING DISC ARDE1925 DET 5 IRW172[60]() Specification : DRG.NO.ARDE 1925 DET.NO.5 PART NO.IRW- 172 C Nonestab
9) ALUMINIUM WASHER DRG.NO. ARDE 2078[60]() Specification : DRG.NO. ARDE/2078 DETAIL NO. 8 DT.27-8-87. C Nonestab
10) IGNITER FOR ROCKET 140 MM EMPTY ASY[60]() Specification : 1)BODY(CONTAINER) TO DRG.NO. NASK 776/9/1/1/1 (PROVISIONAL)DT. 13-5-04 QTY.1 NO. 2)DISC TO DRG NO.NASK 776/9/1/1/2 (PROVISIONAL) DT. 29-5-01 QTY 2 NOS 3) BODY (LID) TO DRG NO. NASK 776/9/1/2/1 (PROVISI ONAL) DT.29-1-04 QTY 1NO. C Nonestab
11) 1)CONTAINER 2) LID 3)DISC[60]() Specification : DRG. NO. NAI(V) 8216/1 QTY. 1 NO.DT. 30.05.2008 2) LID DRG. NO. NAI (V) 8216/2 PROV. QTY 1 NO DT.30.05.2008 3) DISC DRG. NO. NAI(V) 8216/3 PROV.QTY.2 NO. DT. 30.05.2008 C Nonestab
12) PRIMER EMPTY D.C. MK VIII[63]() Specification : DRG.NO. MD SK 1208/7 DT.14.12.1964. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PYROJACK DRG NO KF/SK-2032[99]() Specification : DRG NO. PTA-L-52-01-01-001-X DT. 08-05-2001 13 COMPONENTS AS PER LIST ENCLOSED C Nonestab
2) INNER CASING AND OUTER CASING[60]() Specification : 1) INNER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI(V) 8015/1 (PROV) 2) OUTER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI (V) 8015/2 (PROV) C Nonestab
3) BODY AND CUP[6099990343]() Specification : 1) BODY (IGNITER FOR FOREMOTOR) DRG.NO.NAI(V) 8014/1 (PROV) DT. 26/08/09 - 1 NO. 2) CUP (IGNITER FOR FOREMOTOR) DRG. NO.NAI(V) 8014/2 ( PROV) DT. 4/9/01 - 1 NO. C Nonestab
4) BOOSTER CHARGE 130.02.016 M.EMPTY[6099990429]() Specification : DRG NO.NAI(V) 7001 (PROV) DT. 23.07.2004 EXCEPT. ITEM NO. 1 CASING TO DRG. NO. NAI - 7001/1 DT 23.07.2004 C Nonestab
5) GRID DRG.NO. ARDE/150S PK16[6099991350]() Specification : SPECN-ARDE/SPECN/221 C Nonestab
6) SET OF COMPONENTS FOR MRP DETONATOR[6099999054]() Specification : 1) SQULB PLUG BRIDGED - NASK 1056/4 (PROVISIONAL)DT.4.2.2009 2) SLEEVE - NASK 1056/2 (PROVISIONAL)DT. 4.2.2009 3) PROTECTIVE CAP & PIN FOR DET.NAI(P) 501 (PROV) & 502 (PROV) DT.18-09-2014 C Nonestab
7) DELAY HOLDER ARDE/2078[9910141565]() Specification : SPECN ARDE/SPECN/415-(b) dt. 20.10.93 PARA 1 TO 20 C Nonestab
8) INSULATOR TO DRG.NO.ARDE 2078/32[99]() Specification : SPECN ARDE/SPECN/415 C Nonestab
9) SPOOL ASSY IA-190 SHT CIA 1804 (B)[61]() Specification : CQA(A) 1804 C Nonestab
10) AIR BOLT AMMN NO1 MK1(COX GUN AMMN[60]() Specification : ARDE/SPEC/182/1976-(PART-I) C Nonestab
11) BOLT AMMN NO1 MK1(COX GUN AMMN)[60]() Specification : ARDE / SPEC / 182 / 1976 - (PART-1) ( REVD JUL 97) C Nonestab
12) END PIN ASSEMBLY FOR MRCR ROCKET[60]() Specification : DRG. NO.NAI (P) SK-123 (PROV.) DT. 22.01.2008 C Nonestab
13) CONNECTING SLEEVE MRCR ROCKET[60]() Specification : DRG. NO. NAI (P) SK - 125 (PROV,)DATED 04.03.2010 C Nonestab
14) HOUSING (EMPTY) FOR IGNITER EB-2[60]() Specification : DRG.NO. AFK/SK-347-06 C Nonestab
15) BOOSTER CARTG ASSY EMPTY[60]() Specification : DRG.NO. AFK/SK-014-03 DT.27.12.12 C Nonestab
16) DELAY CUM PRIMING ELEMENT[64]() Specification : DRG.NO. HEMRL DRG 1443 DET NO.4 DT.25-11-97. C Nonestab
17) BODY TO DRG.ARDE 2078/30 DT.27/8/87[99]() Specification : ARDE/SPECN/415 (b) dt. 20.10.93 PARA 1 TO 20. C Nonestab
18) CONTACT TO DRG.ARDE 2078/31.27.8.87[99]() Specification : ARDE/SPECN/415-(b) dt. 20.10.93 PARA 1 TO 2O. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PYRO CARTRIDGE YDP 1 2 ASSY EMPTY[60]() Specification : DRG. NO. NASK 1015 (PROV) DT. 04.12.2009 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PYRO CARTG.YDP 3-3 DRG.NASK 995.[60]() Specification : DRG. NO. NASK 995 (PROV) DT.02.12.2008 C Nonestab
2) PYRO CARTG.YDP 1-3 DRG.NAI(MB)9553[60]() Specification : DRG. NO. NASK 994 (PROV) DT.03-07-2008 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PYRO CARTG.YDP 1-3 DRG.NAI(MB)9553[60]() Specification : DRG. NO. NASK 994 (PROV) DT.03-07-2008 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) COMPONENTS FOR PYRO CTG YDP 4-2[60]() Specification : DRG. NO. NASK 1016 ( PROVISIONAL ) C Nonestab
2) PYRO CARTG.YDP 3-3 DRG.NASK 995.[60]() Specification : DRG. NO. NASK 995 (PROV) DT.02.12.2008 C Nonestab
3) PYRO CARTG.YDP 1-3 DRG.NAI(MB)9553[60]() Specification : DRG. NO. NASK 994 (PROV) DT.03-07-2008 R Nonestab
4) SET OF COMPONENTS FOR PYRO CARTRG.[60]() Specification : DRG ERDL 898 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SQUIB ASSY (EMPTY) FOR PYRO CTG.[60]() Specification : NASK 856 (PROVISIONAL) C Nonestab
2) SET OF PYRO SQUIB OPERATOR II-253ME[60]() Specification : DRG .NO. NASK--- 1089/1 (PROV.) C Nonestab
3) SQUIB PLUG BRIDGED FOR IGNITER[60]() Specification : DRG. NO. ERDL,1164 DET. 2 C Nonestab
4) COMPONENTS FOR SQUIB PSQ 6[60]() Specification : 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG. NO. PTA-L-54-01-01-103-X C Nonestab
5) BRIDGED SQUIB[60]() Specification : DRG. NO. ERDL; 1320 DET. NO. 5. FOR SAM 5B-87 DT. 09.10.98 C Nonestab
6) SQUIB (EMPTY) FOR IGNITER EB-2[60]() Specification : DRG.NO. AFK-SK-343-06 DT.02.02.2006 C Nonestab
7) SQUIB HOLDER DRG.NO. AFK/SK-334-06][60]() Specification : DRG. NO. AFK/SK-334-06 R Nonestab
8) SQUIB HOLDER - DRG.NO. AK/SK-303-05[60]() Specification : DRG. NO. AFK/SK - 303-05 SHEET NO. 3/3 DT.27.11.2014 C Nonestab
9) SQUIB ASSEMBLY (EMPTY) TO DRG. NO ERDL 959 DET. 4 DT 14-09-76 FOR PP9 RST[64]() Specification : DRG. NO ERDL 959 DET. 4 DT 14-09-76 C Nonestab
10) MFG OF L.T SQUIB. DRG NO ERDL 563.[96]() Specification : DRG.NO.ERDL 563 DET NO. 7 DATE 9.6.89 C Nonestab
11) CHARGES FOR MISC JOB FOR LT SQUIB[96]() Specification : DRG NO.ERDL-1046 DET-2. Dt. 19.11.2009 R Nonestab
12) SQUIBS TO DRG NO.ERDL 1004 DET NO.1[99]() Specification : ERDL SPECN NO. ERDL/PYRO/PS/145 C Nonestab
13) SQUIB PLUG DET.ELEC.82 MK IN2[64]() Specification : DRG. NO. HEMRL DRG. 1443 DET. NO. 8 DT. 25.11.97 C Nonestab
14) SQUIB PLUG TO DRG. NO. ERDL DRG 897, DET NO. 7[60]() Specification : DRG. NO. ERDL DRG 897, DET NO. 7 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) INNER CASING AND OUTER CASING[60]() Specification : 1) INNER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI(V) 8015/1 (PROV) 2) OUTER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI (V) 8015/2 (PROV) C Nonestab
2) BODY AND CUP[60]() Specification : 1) BODY (IGNITER FOR FOREMOTOR) DRG.NO.NAI(V) 8014/1 (PROV) DT. 26/08/09 - 1 NO. 2) CUP (IGNITER FOR FOREMOTOR) DRG. NO.NAI(V) 8014/2 ( PROV) DT. 4/9/01 - 1 NO. C Nonestab
3) BOOSTER CHARGE 130.02.016 M.EMPTY[60]() Specification : DRG NO.NAI(V) 7001 (PROV) DT. 23.07.2004 EXCEPT. ITEM NO. 1 CASING TO DRG. NO. NAI - 7001/1 DT 23.07.2004 C Nonestab
4) GRID DRG.NO. ARDE/150S PK16[60]() Specification : SPECN-ARDE/SPECN/221 C Nonestab
5) SET OF COMPONENTS FOR MRP DETONATOR[60]() Specification : 1) SQULB PLUG BRIDGED - NASK 1056/4 (PROVISIONAL)DT.4.2.2009 2) SLEEVE - NASK 1056/2 (PROVISIONAL)DT. 4.2.2009 3) PROTECTIVE CAP & PIN FOR DET.NAI(P) 501 (PROV) & 502 (PROV) DT.18-09-2014 C Nonestab
6) DELAY HOLDER ARDE/2078[99]() Specification : SPECN ARDE/SPECN/415-(b) dt. 20.10.93 PARA 1 TO 20 C Nonestab
7) INSULATOR TO DRG.NO.ARDE 2078/32[99]() Specification : SPECN ARDE/SPECN/415 C Nonestab
8) SPOOL ASSY IA-190 SHT CIA 1804 (B)[61]() Specification : CQA(A) 1804 C Nonestab
9) AIR BOLT AMMN NO1 MK1(COX GUN AMMN[60]() Specification : ARDE/SPEC/182/1976-(PART-I) C Nonestab
10) BOLT AMMN NO1 MK1(COX GUN AMMN)[60]() Specification : ARDE / SPEC / 182 / 1976 - (PART-1) ( REVD JUL 97) C Nonestab
11) END PIN ASSEMBLY FOR MRCR ROCKET[60]() Specification : DRG. NO.NAI (P) SK-123 (PROV.) DT. 22.01.2008 C Nonestab
12) CONNECTING SLEEVE MRCR ROCKET[60]() Specification : DRG. NO. NAI (P) SK - 125 (PROV,)DATED 04.03.2010 C Nonestab
13) HOUSING (EMPTY) FOR IGNITER EB-2[60]() Specification : DRG.NO. AFK/SK-347-06 C Nonestab
14) BOOSTER CARTG ASSY EMPTY[60]() Specification : DRG.NO. AFK/SK-014-03 DT.27.12.12 C Nonestab
15) DELAY CUM PRIMING ELEMENT[64]() Specification : DRG.NO. HEMRL DRG 1443 DET NO.4 DT.25-11-97. C Nonestab
16) SET OF 13 COMPONENTS FOR SUB ASSEMBLY FOR PYROJACK DRG NO. PTA-L-52-01-01-001-X[99]() Specification : DRG NO. PTA-L-52-01-01-001-X DT. 08-05-2001 13 COMPONENTS AS PER LIST ENCLOSED C Nonestab
17) BODY TO DRG.ARDE 2078/30 DT.27/8/87[99]() Specification : ARDE/SPECN/415 (b) dt. 20.10.93 PARA 1 TO 20. C Nonestab
18) CONTACT TO DRG.ARDE 2078/31.27.8.87[99]() Specification : ARDE/SPECN/415-(b) dt. 20.10.93 PARA 1 TO 2O. C Nonestab
19) PUNCH AMMUNITION INDEX NO. 6P AND 7P NO. 1 MK-2(IN) (EMPTY) TO DRG. NO. ARDE 2137 DET NO 1 SPECN. NO. ARDE/SPECN/182/1976 (PART-I)[60]() Specification : ARDE/SPECN/182/1976 (PART-I) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BASE PLUG DES REF NO CIA/AMN/1799 DET NO.4, PT NO. ITW 66 SPECN: CQA(A) 1504[61]() Specification : CQA(A) 1504 C Nonestab
2) HOUSING DELAY SHT 2 SPECN CIA-1804[61]() Specification : CQA(A)1804 C Nonestab
3) SET SCREW SLOTTED HD NO 2 BA[17]() Specification : DESIGN REF CIA/AMN/885 C Nonestab
4) CAP WITH HOLDER FFV-840 DRG. NO. F-1334-230761-C[60]() Specification : DRG NO F-1334-230761 C Nonestab
5) CAP TO.DRG.NO.ARDE1933[60]() Specification : CQA(A) 2324 C Nonestab
6) ADAPTER NOSE MOR BOMB NO.1 MK 1[60]() Specification : CQA(A) 2351 C Nonestab
7) FIRING PIN TO CQA DRG 04-749-13022[60]() Specification : CQA[A] SEALED DRG NO.04-749-130222-03.2E C Nonestab
8) SPACER RING DRG.NO.04-749-130222-03[60]() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E C Nonestab
9) SLUG FOR 14.5MM CASE AFK/PJ/SK-56[60]() Specification : AFK, DRG NO.AFK/PJ/SK-56 C Nonestab
10) CENTER PIECE (MODIFIED) FOR GRENADE[60]() Specification : DRG.NO. AFK/SK/798-14 C Nonestab
11) STRIKER DET 3 PART ITW 65 DC (I)[61]() Specification : CQA(A) 1504 C Nonestab
12) CENTRE PIECE DET 2 PT ITW 64 DC (I)[61]() Specification : CQA(A) 1504 C Nonestab
13) RETAINING PIN & RING DET 6 PT ITW-10[61]() Specification : CQA(A) 1504 C Nonestab
14) FILLING HOLE PLUG(ALUMN)[61]() Specification : CQA(A)1504 C Nonestab
15) WASHER DELAY DESIGN. REF.NO. IA-1899 SHEET NO 3 PART NO.ITX 60 DC 35801-A. SPECN: CQA(A)1804[61]() Specification : CQA(A)1804 C Nonestab
16) MINE APM CONSISTING OF BODY,SPOOL[61]() Specification : CQA(A) 1804 C Nonestab
17) HOUSING PRIMER ALLUM.FOR FUZE M605[63]() Specification : CIA 1803 C Nonestab
18) FUZE MINE COMB.M605 ASSEMBLY EMPTY[63]() Specification : CQA(A) 1803 C Nonestab
19) PLUNGER DRG.NO.04-44-79000-06111-4 E[63]() Specification : DRG. NO. 04-44-79000- 06111-4 E C Nonestab
20) PLUNGER GUIDE 04-44-79000-06112-4 E[63]() Specification : DRG NO.04-44- 79000-06112-4 E C Nonestab
21) DET NO 87 A) JUNC.CLIP & RET.STRIP[64]() Specification : DRG NO D D(L) 17434 PART IQX 996, DD(L) 17432 PART IQX 994 C Nonestab
22) CHARGE DEMOLITION 1&6 MK5 BECH EMPTY[64]() Specification : CQA 0511 C Nonestab
23) FIRING BOLT[60]() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-04.1E C Nonestab
24) PLUG FUZE HOLE, 35 MM NO. 6 AS PER DRG. NO. CIA/AMN/2125 PART NO. ITV 95[60]() Specification : DRG. NO. CIA/AMN/2125 PART NO. ITV 95 C Nonestab
Category : p
Grade : Grade III
Size : S
3630 GANGADEEP INDUSTRIES
68/60, 2ND MAIN ROAD, INDUSTRIAL TOWN, RAJAJI NAGAR, BANGALORE KARNATAKA
PIN1 : 560044
Phone No. : 080 23150235 		BLRM05477D

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BALL V 3 POINT 175 TY 37 006 080 77 TO SK NO OTF DD 031 IN F C Description : STEEL BALL V 3 POINT 175 TY 37 006 080 77 TO SK NO OTF DD 031 IN F C() Specification : AS PER DRG. C Estab
2) STEEL BALL 6 POINT 35 MM DIA FD 124 DC 37162 A DT 11 03 08 Description : STEEL BALL 6 POINT 35 MM DIA FD 124 DC 37162 A DT 11 03 08() Specification : STEEL BALL 6 POINT 35 MM DIA FD 124 DC 37162 A DT 11 03 08 C Estab
3) BALL BEARING DS CAT NO 311 000363 QX 1538 IN F C Description : BALL BEARING DS CAT NO 311 000363 QX 1538 IN F C() Specification : BALL BEARING DS CAT NO 311 000363 QX 1538 IN F C C Estab
4) SPRING RING TO DRG NO F 1321 420540 B IN F C Description : SPRING RING TO DRG NO F 1321 420540 B IN F C() Specification : SPRING RING TO DRG. NO. F-1321-420540 B IN F/C C Estab
5) STEEL BALL 6 3 5 200 GOST 3722 81 IN F C TO GSF SK Description : STEEL BALL 6 3 5 200 GOST 3722 81 IN F C TO GSF SK() Specification : STEEL BALL 6.3.5-200 GOST 3722-81 IN F/C TO GSF SK C Estab
6) STEEL BALL 3 5 MM DIA TO DRG NO NAI J 501 5 IN FC Description : STEEL BALL 3 5 MM DIA TO DRG NO NAI J 501 5 IN FC() Specification : STEEL BALL 3.5 MM DIA TO DRG NO NAI(J) 501/5 IN FC C Estab
7) SPRING DRG F1321 422440 D S K NO M 7062 FFV 64C Description : SPRING DRG F1321 422440 D S K NO M 7062 FFV 64C() Specification : SPRING DRG F-1321-422440-D. (S. K. NO. M-7062) FFV 64-C C Estab
8) STAINLESS STEEL BALL 5MM DIA TO PT NO IQX 817 Description : STAINLESS STEEL BALL 5MM DIA TO PT NO IQX 817() Specification : STAINLESS STEEL BALL 5MM DIA TO PT NO IQX 817 C Estab
9) BALL 15 COMMA 875 YUOYU REQ FOR DRG NO AK 630 SB 119 IN Description : BALL 15 COMMA 875 YUOYU REQ FOR DRG NO AK 630 SB 119 IN() Specification : BALL 15,875 YUOYU (REQ FOR DRG. NO. AK-630 SB 119) IN C Estab
10) BALL 10 319 20 TO SPECN GOST 3722 81 Description : BALL 10 319 20 TO SPECN GOST 3722 81() Specification : BALL 10.319-20 TO SPECN GOST 3722-81 C Estab
11) BALL 10 319 40 TO SPECN GOST 3722 81 Description : BALL 10 319 40 TO SPECN GOST 3722 81() Specification : BALL TO DRG. No. BALL 10.319-40 IN FINISHED CONDITION C Estab
12) BALL 15 POINT 875 100YU TU VNIPP 080 00 Description : BALL 15 POINT 875 100YU TU VNIPP 080 00() Specification : BALL 15.875 -100YU TU VNIPP.080-00 C Estab
Category : dp
Grade : 1
Size : S
3631 PEMRAJ INDUSTRIES
1194/18A, SHIVAJI NAGAR KRISHNANAND PUNE MAHARASHTRA
PIN1 : 411005
Phone No. : 02025535663 		PNEP 02306

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) LOCKING NUT TO CQA A DRG N O 3 016919 DET 55DC 37284 A DT 06 7 2011 Description : LOCKING NUT TO CQA A DRG N O 3 016919 DET 55DC 37284 A DT 06 7 2011() Specification : LOCKING NUT TO CQA(A)DRG.N O. 3-016919 DET-55DC-37284-A DT.06.7.2011 C Estab
Category : ddp
Grade : 1
Size : S
3632 O.K.Engineers&Marketers , ,
301, Dakshinamurti road, Opp. Warharpande House, Sir Madhavrao Deshapande Marg, Nagpur Maharashtra
PIN1 : 440032
Phone No. : 9423106212
GSTIN : 27AMVPK8922A1ZS 		AMVPK8922A

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1753257723 NAIL WIRE IRON PL.HD.SZ-20MM X 18 G() -- R Estab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) CUTTING & STITCHING OF BAGS M4A2 Description : CUTTING & STITCHING OF BAGS M4A2() Specification : CUTTING & STITCHING OF CHARGE BAGS FOR M4A2 AS PER DRG.NO- 12882-2-0 TO 12884-2-0,12885-1-0,12886-0-0,12887-0-0,12888-1 -0,12890-2-0,NO 12909-0-0 , 12910-0-0,14776-0-0 TO 14778-0- 0,13976-0-0,12891-0-0,12899-0-0,12905-0-0. MATERIAL WILL R Estab
2) CUTTING & STITCHING OF CHARGE BAG-9 Description : CUTTING & STITCHING OF CHARGE BAG-9() Specification : CUTTING AND STITCHING OF CHARGE BAGS FOR CHARGE 9 OF 155MM AMMN.AS PER DRG.NO-6388103,6388104,6388106,6388115,6388116, 6355588,5191810,5173926,4090246,4090247,4079932. MATERIAL WILL BE SUPPLIED BY OFBA. R Estab
3) SURGICAL HAND GLOVES S-7 1/2" Description : SURGICAL HAND GLOVES S-7 1/2"() Specification : SURGICAL HAND GLOVES S-7 1/2" (SEVEN AND HALF) ISI MARKED, NO. IS-4148 (DIALOMATIC) R Estab
4) BAG MADE OF REEL CLOTH Description : BAG MADE OF REEL CLOTH() Specification : BAG MADE OF REEL CLOTH AS PER DRG NO.OFBA/NCP/EXPN/17 R Estab
5) METALISED POLISTER FILM Description : METALISED POLISTER FILM() Specification : METALISED POLYSTER FILM HAVING THICKNESS 12.5 MICRONS LAMINATED WITH POLYTHENE OF 150 GAUGE. R Estab
Category : ddp
Grade : 3
Size : S
3633 MAX STEELS
GAGANGIRI TOWER, OFFICE NO 103, 1st FLOOR, 25/29, DR. DESHMUKH LANE MUMBAI MAHARASHTRA
PIN1 : 400004
Phone No. : 022-23867943 		AFXPS8552F

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) AL ALLOY EXTRUDED ROD 60MM DIA TO SPCN EN 755 2 Description : AL ALLOY EXTRUDED ROD 60MM DIA TO SPCN EN 755 2() Specification : AL ALLOY EXTRUDED ROD 60MM DIA TO SPCN EN-755-2 R Estab
Category : s
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) STAINLESS STEEL ROUND GRADE AISI 316 SIZE 130 MM OD X 130MM LONG OR ITS MULTIPLE Description : STAINLESS STEEL ROUND GRADE AISI 316 SIZE 130 MM OD X 130MM LONG OR ITS MULTIPLE() Specification : STAINLESS STEEL ROUND GRADE AISI 316 SIZE 130 MM OD X 130MM LONG OR ITS MULTIPLE R Estab
2) AL ALLOY EXTRUDED BAR GSF SK NO. OTFF/DD/005/2C Description : AL ALLOY EXTRUDED BAR GSF SK. NO. OTF/DD/005/2C() Specification : AL ALLOY EXTRUDED BAR GSFSK. NO. OTF/DD/005/2C R Estab
Category : s
Grade : 3
Size : S
3634 BHATTACHARJEE INTERNATIONAL
15B, SEBAK BAIDYA STREET KOLKATA WEST BENGAL
PIN1 : 700029
Phone No. : 9748271262 		AMIPB6160A

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) COPPER STRIP TO SPECN IS 3487 66 CHEMICAL COMP Description : COPPER STRIP TO SPECN IS 3487 66 CHEMICAL COMP() Specification : COPPER STRIP TO SPECN IS:3487-66 CHEMICAL COMP R Estab
Category : p
Grade : 3
Size : S
3635 SUDHIR ENTERPRISES
PLOT NO.68, SECIE BALANAGAR RANGA REDDY DISTRICT HYDERBAD HYDERABAD ANDHRA PRADESH
PIN1 : 500037
Phone No. : 09347573158 		AAKPA5756B

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) 9911846364 ENGAGING PLATE FOR BOX H2A Description : 9911846364 ENGAGING PLATE FOR BOX H2A() Specification : AS PER OFBH SPECIFICATION R Estab
2) 9911843269 CARRYING LINK DRG OFB C 1540A Description : 9911843269 CARRYING LINK DRG OFB C 1540A() Specification : AS PER OFBH SPECIFICATION R Estab
3) 9911842877 BRACKET A 2 FOR BOX C 53A Description : 9911842877 BRACKET A 2 FOR BOX C 53A() Specification : AS PER OFBH SPECIFICATION R Estab
4) 9911843268 ASSEMBLED SECURING PLATE 1545 Description : 9911843268 ASSEMBLED SECURING PLATE 1545() Specification : ASSEMBLES SECURING PLATE 1545 R Estab
5) 9911842659 HANDLE AND HANDLE CLIP ASSY 1564 Description : 9911842659 HANDLE AND HANDLE CLIP ASSY 1564() Specification : DRG, NO.OFB/C/1564 R Estab
6) 9911846252 CATCH FOR SM 171K 651J 642 Description : 9911846252 CATCH FOR SM 171K 651J 642() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION R Estab
7) 9911846362 PLATE FOR HINGE OF BOX H2A Description : 9911846362 PLATE FOR HINGE OF BOX H2A() Specification : AS PER DRG./SPECIFICATION R Estab
Category : p
Grade : 3
Size : S
3636 SUPREME AGENCIES,
10-5-127, BHAGAT SINGH PARK ROAD, FATHENAGAR, HYDERBAD A.P.
PIN1 : 500018
Phone No. : 04023776002 		ABWPS5297A

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) 9911843138 CAPCELL W ADHESIVE 195X180X15 Description : 9911843138 CAPCELL W ADHESIVE 195X180X15() Specification : AS PER SPECIFICATION R Estab
2) 9911843132 CAPCELL WITH ADHESIVE102X90X35 Description : 9911843132 CAPCELL WITH ADHESIVE102X90X35() Specification : AS PER SPECIFICATION R Estab
3) 9911844267 CAPCELL CR POLY FOAM 90X30X6 Description : 9911844267 CAPCELL CR POLY FOAM 90X30X6() Specification : AS PER SPECIFICATION R Estab
4) 9911843236 CAPCELL WITH ADHESIVE 90X90X18 Description : 9911843236 CAPCELL WITH ADHESIVE 90X90X18() Specification : AS PER OFBH SPECIFICATION R Estab
5) 9911843131 CAPCELL WITH ADHESIVE102X90X30 Description : 9911843131 CAPCELL WITH ADHESIVE102X90X30() Specification : AS PER SPECIFICATION R Estab
6) 9911842608 CR LINK POLY FOAM 140X28X6MM Description : 9911842608 CR LINK POLY FOAM 140X28X6MM() Specification : AS PER SPECIFICATION R Estab
7) 9911846260 PACKING CUSHION Description : 9911846260 PACKING CUSHION() Specification : AS PER SPECIFICATION R Estab
8) 9911843128 CAPCELL WITH ADHESIVE 90X60X40 Description : 9911843128 CAPCELL WITH ADHESIVE 90X60X40() Specification : AS PER SPECIFICATION R Estab
9) 9911846370 SUPPORT FOR PACKAGE PRE FRAG 11 Description : 9911846370 SUPPORT FOR PACKAGE PRE FRAG 11() Specification : AS PER SPECIFICATION R Estab
10) 9911844104 CROSSLINK POLY FOAM 105X35X6MM Description : 9911844104 CROSSLINK POLY FOAM 105X35X6MM() Specification : AS PER OFBH SPECIFICATION R Estab
11) 9911844102 CROSSLINK POLY FOAM 95X42X6MM Description : 9911844102 CROSSLINK POLY FOAM 95X42X6MM() Specification : AS PER OFBH SPECIFICATION R Estab
12) 9911844101CROSSLINK POLY FOAM 600X35X6MM 13 Description : 9911844101CROSSLINK POLY FOAM 600X35X6MM 13() Specification : AS PER SPECIFICATION R Estab
13) 9911842609 CR LINK POLY FOAM 150X28X6MM Description : 9911842609 CR LINK POLY FOAM 150X28X6MM() Specification : AS PER OFBH SPECIFICATION R Estab
14) 9911842607 CR LINK POLY FOAM 180X28X6 MM 15 Description : 9911842607 CR LINK POLY FOAM 180X28X6 MM 15() Specification : AS PER SPECIFICATION R Estab
15) 9911844103 CROSSLINK POLY FOAM 140X97X6MM Description : 9911844103 CROSSLINK POLY FOAM 140X97X6MM() Specification : AS PER SPECIFICATION R Estab
16) 9911844100 CROSSLINK POLY FOAM 80X50X6MM Description : 9911844100 CROSSLINK POLY FOAM 80X50X6MM() Specification : AS PER SPECIFICATION R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PROFEEL ANTISTATIC FITMENTS() Specification : AS PER CQA(A) SPECN. R Estab
2) PIECE PACKING SET TO DRG ARDE 1930() Specification : DRG NO ARDE 1930 DC 35965A (1) BOTTOM DET NO 3 PART ISV 1716 LENGTH 224MM -1 NO (2)TOP DET NO 4 PART ISV 1717 LENGTH 224MM 1 NO AND PIECES OF SIZES 174 X 113 X 25MM-2NOS, 274 X174X 15MM-2NOS, 113X 100 X 3MM-1NO R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SET OF PROFEEL ANTISTATIC FITMENTS() Specification : AS PER CQA(A) SPECN. R Estab
2) PIECE PACKING SET TO DRG ARDE 1930() Specification : DRG NO ARDE 1930 DC 35965A (1) BOTTOM DET NO 3 PART ISV 1716 LENGTH 224MM -1 NO (2)TOP DET NO 4 PART ISV 1717 LENGTH 224MM 1 NO AND PIECES OF SIZES 174 X 113 X 25MM-2NOS, 274 X174X 15MM-2NOS, 113X 100 X 3MM-1NO R Estab
Category : p
Grade : 3
Size : S
3637 VIMAL PAINTS PVT. LTD.,
C-18/4, MIDC, INDUSTRIAL AREA, NAGPUR M.S.
PIN1 : 440028
Phone No. : 9423683003 		AABCV4597P

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) 1011517225 PAINT RM AD LIGHT BRS GREEN Description : 1011517225 PAINT RM AD LIGHT BRS GREEN() Specification : AS PER OFBH SPECIFICATION R Estab
2) 1011508220 PAINT RFU AMMN OG STOVE ISC220 Description : 1011508220 PAINT RFU AMMN OG STOVE ISC220() Specification : AS PER OFBH SPECIFICATION R Estab
3) 9911844695 PAINT R M A D LIGHT BRS GREEN Description : 9911844695 PAINT R M A D LIGHT BRS GREEN() Specification : PAINT R/M A/D LIGHT BRS. GREEN R Estab
4) 9911844696 VARNISH A D AMN TO SPECN IND Description : 9911844696 VARNISH A D AMN TO SPECN IND() Specification : AS PER SPECIFICATION R Estab
5) 9911835554 VARNISH OIL STOVING APC NO 221 Description : 9911835554 VARNISH OIL STOVING APC NO 221() Specification : AS PER OFBH SPECIFICATION R Estab
6) PAINT R/M A/D O.GREEN ISC-220 Description : PAINT R/M A/D O.GREEN ISC-220() Specification : AS PER O.F. BHUSAWAL REQUIREMENT/SPECIFICATION R Estab
7) 9911833896 PAINT RFU OLIVE GREEN ISC 294 Description : 9911833896 PAINT RFU OLIVE GREEN ISC 294() Specification : AS PER OFBH SPECIFICATION R Estab
8) 9911839150 PAINT RMAD MATT LIGHT BROWN Description : 9911839150 PAINT RMAD MATT LIGHT BROWN() Specification : PAINT RMAD MATT LIGHT BROWN R Estab
9) 1011318002 PAINT RM AD M FINISH SPRAY BLAC Description : 1011318002 PAINT RM AD M FINISH SPRAY BLAC() Specification : AS PER OFBH SPECIFICATION R Estab
10) 1011718446 PAINT RMP R O Z C A D JSS 8010 Description : 1011718446 PAINT RMP R O Z C A D JSS 8010() Specification : AS PER O.F. BHUSAWAL REQUIREMENT/SPECIFICATION R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) PAINT PRIMING REDOXIDE ZINC CHROME AMMN AIR DRYING MATT FINISH BRUSHING or SPRAYING Description : PAINT PRIMING REDOXIDE ZINC CHROME AMMN AIR DRYING MATT FINISH BRUSHING or SPRAYING() Specification : SPECIFICATION JSS 8010-68:2014 (REV.NO.3) E Estab
2) READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004 Description : READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004() Specification : READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004 E Estab
3) APC 221 AS PER SPECIFICATION 1011704021 Description : APC 221 AS PER SPECIFICATION 1011704021() Specification : APC 221 to Specn JSS 8010-28:2015(Rev-No.3) OR Specn JSS 8010-68:2014(Rev.No.3) Paint Ready Mixed Priming Red Oxide Zinc Chrome, Ammn., Air drying Matt Finish, Brushing/Spraying. E Estab
4) PAINT RFU BLACK ACID PROOF Description : PAINT RFU BLACK ACID PROOF() Specification : SPRAYING SPECN.IND/ME/651(A)DC(I)NO.3754-ME DT.12.12.2002 E Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001670209 PAINT RED OXIDE ORTHO XYLENE BASED Description : 1001670209 PAINT RED OXIDE ORTHO XYLENE BASED() Specification : PAINT READY MIXED AIR DRYING, MATT, ORTHOXYLENE BASED ZINCCHROME REDOXIDE SPRAYING/BRUSHING/DIPPING/POUR APPLICATIONFOR INNER COATING OF HE SHELLS TO SPECN. IND/ME/964 (PROV)DC-3214-ME DT. 14/12/94.IN PACK.OF 1/2 LIT.CAP. R Estab
2) 1001729903 THINNER PAINT TURPEN SPIRIT WHITE Description : 1001729903 THINNER PAINT TURPEN SPIRIT WHITE() Specification : THINNER PAINT (TURPENTINE SUBSTITUTE) AMMN. TO SPECN. NO.JSS 8010-26:2009,(REVISION NO.2) DC NO.3978-ME DT.24.09.2009 R Estab
3) 1003010223 APC 223 TO JSS 8010 63 2004 REV 2 Description : 1003010223 APC 223 TO JSS 8010 63 2004 REV 2() Specification : JSS 8010-63:2004 FOR FUZE B-429 ASSY. R Estab
4) 1003100803 APC 2 TO JSS 8030 14 2009 Description : 1003100803 APC 2 TO JSS 8030 14 2009() Specification : JSS-8030-14:2009 R Estab
5) 1003110517 APC NO 224 Description : 1003110517 APC NO 224() Specification : JSS-8010-63: 2004 R Estab
6) 1003110518 APC 225 (VARNISH 30%) JSS-8010-63 Description : 1003110518 APC 225 (VARNISH 30%) JSS-8010-63() Specification : SPECN. NO. JSS-8010-63 R Estab
7) 1011001001 PAINT BLACK ACID PROOF SPRAYING Description : 1011001001 PAINT BLACK ACID PROOF SPRAYING() Specification : SPECIFICATION IND/ME/651(A) R Estab
8) 1011300007 PALE YELLOW PAINT SPECN IS 5 2004 Description : 1011300007 PALE YELLOW PAINT SPECN IS 5 2004() Specification : IS-5:2007, ISC NO.356 TO IS: 138 R Estab
9) 1011307225 PAINT LIGHT BRUNSWICK GREEN SGF Description : 1011307225 PAINT LIGHT BRUNSWICK GREEN SGF() Specification : IS: 168-1993 R Estab
10) 1011308225 PAINT LIGHT BRUNSWICK GREEN MATT Description : 1011308225 PAINT LIGHT BRUNSWICK GREEN MATT() Specification : PAINT READY MIXED AIR DRYING MATT FINISH LIGHT BRUNSWICKGREEN FOR GENERAL PURPOSE ISC 225 OF IS 5-1994 (FOURTH REVI-SION) (AMDT.-1) TO SPECN IS 168-1993 (THIRD REVISION)AS APPLICABLE FOR DEFENCE USE. MODE OF APPLICATION-SPRAYING/BRUSHING R Estab
11) 1011312220 PAINT OLIVE GREEN MATT FINISH Description : 1011312220 PAINT OLIVE GREEN MATT FINISH() Specification : OF ISC-220 OF IS-5-1994 (FOURTH REVISION) REAF.2000 AMND NO.1.TO SPECN. IS-168-1993 THIRD REVISION R Estab
12) 1011312359 PAINT BUFF MIDDLE SGF GEN TO IS-168 Description : 1011312359 PAINT BUFF MIDDLE SGF GEN TO IS-168() Specification : SPECN IS:5-1994 (FOURTH REVISION) WITH AMENDMENT NO. 1 TO SPECN. IS:168-1993 (THIRD REVISION) R Estab
13) 1011318631 PAINT LIGHT GREY MATT FINISH GEN PU Description : 1011318631 PAINT LIGHT GREY MATT FINISH GEN PU() Specification : IS-168:1993 R Estab
14) 1011337001 PAINT STENC BLACK SGF IS 138 1992 Description : 1011337001 PAINT STENC BLACK SGF IS 138 1992() Specification : SPECN IS-138-1992 R Estab
15) 1011337012 PAINT WHITE MARKING STENCILING SGF Description : 1011337012 PAINT WHITE MARKING STENCILING SGF() Specification : IS: 138- 1992 R Estab
16) 1011337356 PAINT GOLDEN YELLOW SGF IS 138 1992 Description : 1011337356 PAINT GOLDEN YELLOW SGF IS 138 1992() Specification : IS-138-1992 R Estab
17) 1011518001 PAINT BLACK MATT FINISH SPRAYING Description : 1011518001 PAINT BLACK MATT FINISH SPRAYING() Specification : SPECN. IS:168-1993 (THIRD REVISION) REAFFIRMED-2002 (AS APPLICABLE FOR DEFENCE USE) R Estab
18) 1011535537 PAINT STENC RED SIGNAL IS 138 1992 Description : 1011535537 PAINT STENC RED SIGNAL IS 138 1992() Specification : IS: 138 -1992 R Estab
19) 1011714447 PAINT RED OXIDE ZINC CHROME IS 1874 Description : 1011714447 PAINT RED OXIDE ZINC CHROME IS 1874() Specification : IS:1874:1992 R Estab
20) 1013401035 VARNISH AIR DRYING AMMN IND/ME/719 Description : 1013401035 VARNISH AIR DRYING AMMN IND/ME/719() Specification : SPECIFICATION NO.IND/ME/719 (D) R Estab
21) 1035829000 OIL LINSEED BOILED IS 77 1976 Description : 1035829000 OIL LINSEED BOILED IS 77 1976() Specification : OIL LINSEED BOILED IS:77-1976 (SECOND REVISION) (REAFFIRMED1999) R Estab
Category : p
Grade : 3
Size : S
3638 S B JADHAV
DEFENCE COLONY, BEHIND GOLANI COMPLEX ROAD, BHUSAWAL MAHARASHTRA
PIN1 : 425203
Phone No. : 08007645301 		AFHPJ1587K

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) PROCESSING FOR AMMNBOX SM51 Description : PROCESSING FOR AMMNBOX SM51() Specification : PROCESSING FOR AMMN.BOX SM-51 R Estab
2) PROCESSING FOR AMMNCONTC44A Description : PROCESSING FOR AMMNCONTC44A() Specification : PROCESSING FOR AMMN.CONT.C-44A R Estab
3) PROCESSING OF AMMN CONT BOX 43 Description : PROCESSING OF AMMN CONT BOX 43() Specification : PROCESSING OF AMMN.CONT.BOXC43 R Estab
4) PROCESSING OF BOX 601 MODIFIED Description : PROCESSING OF BOX 601 MODIFIED() Specification : PROCESSING OF BOX 601 MODIFIED R Estab
5) PROCESSING OF CARRIER 6A Description : PROCESSING OF CARRIER 6A() Specification : PROCESSING OF CARRIER 6A R Estab
6) RIVETING OF CARRIER 6A Description : RIVETING OF CARRIER 6A() Specification : RIVETING OF CARRIER 6A R Estab
7) SERVICES FOR AMMN CONT BOX 651 Description : SERVICES FOR AMMN CONT BOX 651() Specification : SERVICES FOR AMMN.CONT.BOX 651 R Estab
Category : p
Grade : 3
Size : S
3639 ABB LIMITED
RAMAN BOARDS, 167 TH K.M., MYSORE-OOTY ROAD, THANDAVAPURA MYSORE KARNATAKA
PIN1 : 571302
Phone No. : 08221 2536100 		AAACA3834B

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1418020085 BROWN PAPER FOR PRIMARY CARTG CASE Description : 1418020085 BROWN PAPER FOR PRIMARY CARTG CASE() Specification : JSS:8135-09: 2004 R Estab
2) 1418020086 PAPER NATURAL BROWN COLOUR OF 685.5 Description : 1418020086 PAPER NATURAL BROWN COLOUR OF 685.5() Specification : SPECN. NO. JSS 8135-09 R Estab
Category : ddp
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PAPER FOR CARTRIDGE CASES AMMUNITION IN REELS OF 1092.2 MMWIDE AND 450 MM TO 500 MM DIA IN BROWN COLOUR() Specification : JSS:8135-09:2004 R Estab
2) PAPER FOR GUN CARTG. AMMUNITION.THICKNESS 0.142MM TO 0.162MM WIDTH 387.4MM PAPER TO BE ROLLED IN REELS. PAPER LOADED REEL DIA 457.2MM TO 508MM. CORE DIA OF REEL 50MM BROWN/BUFF NATURAL COLOUR TO SPECIFICATION JSS:8135-09 :2004(REVISION NO. 2) DC 5065-ME REAFFIRMED 2011() Specification : JSS:8135-09:2004 R Estab
3) PAPER FOR GUN CRTG.AMMUNITION IN REELS OF 345MM WIDE AND 450 TO 500 MM IN DIAMETER THICKNESS .142 TO .162MM GSM 105 TO 115() Specification : JSS:8135-09:2004 R Estab
Category : p
Grade : 3
Size : L
3640 ARCOTECH LTD
181,SECTOR-B INDUSTRIAL GROWTH CENTRE REWARI HARYANA
PIN1 : 123501
Phone No. : 07612743368 		0000TR3349

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) COPPER STRIP LF 0700464012 Description : COPPER STRIP LF 0700464012() Specification : COPPER STRIP 16+,-0.50 MM WIDE x 0.10+,-0.01 MM THICK IN COILS OF 9 METRES LONG SPECN: BS-2870-1980-C 104 CONDITION"H". R Estab
2) BRASS STRIP 28X0.5MM BS2870 CZ102 (0710291505) Description : BRASS STRIP 28X0.5MM BS2870 CZ102 (0710291505)() Specification : BRASS STRIP 28 +/-0.2 MM WIDE X 0.5+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BS-2870-1980,DESIG.CZ102,1/2H.HARDNESS 100-115 VPN.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS BOWINESS (MAX) 2MM/MTR.COIL WT.35-40KG,ID WITH NYLON RING30 R Estab
3) BRASS STRIP 22X1.02 MM (ITEM CODE: 0710664345) Description : BRASS STRIP 22X1.02 MM (ITEM CODE: 0710664345)() Specification : BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90 R Estab
4) BRASS STRIP 24X0.70MM JSS:9535-02 (0710665177) Description : BRASS STRIP 24X0.70MM JSS:9535-02 (0710665177)() Specification : BRASS STRIP 24+/-0.20 MM WIDE X 0.70+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN:JSS-9535-02-2008(REV.NO.3)HARDNESS 75-90HV.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS,BOWINESS (MAX) 2MM/MTR.COIL WT 35-40KG,ID WITH NYLON RING300MM MIN R Estab
5) BRASS STRIP 22X.7MM BS2870CZ106 1/4 (ITEM CODE: 0710665195) Description : BRASS STRIP 22X.7MM BS2870CZ106 1/4 (ITEM CODE: 0710665195)() Specification : BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD R Estab
6) BRASS STRIP 48X1.1MM BS2870 CZ108 (0710890346) Description : BRASS STRIP 48X1.1MM BS2870 CZ108 (0710890346)() Specification : BRASS STRIP 48 +/-0.40mm WIDE X 1.1 +/-0.02mm THICK IN COLD ROLLED CONDITION LENGTH 3 METRES IN COIL MIN SPECN : BS-2870 CZ-108, BRINELL HARDNESS : 80 - 120 R Estab
7) BRASS STRIP 132X0.4MM IS410 ZN30 O (0712590132) Description : BRASS STRIP 132X0.4MM IS410 ZN30 O (0712590132)() Specification : BRASS STRIP 132+/- 0.5 MM WIDE X 0.4 +/-0.025MM THICK TO SPECN.IS 410-1977 (REAFFIRMED 2006) (THIRD REVISION) WITHAMENDMENT NO.1 APRIL 1981 Cu Zn 30 CONDITION ANNEALED INCOIL. WEIGHT OF COIL NOT THAN 30 KG. I/D MINIMUM 100 MM. R Estab
8) BRASS STRIP 127X0.4MM IS410 ZN30 O (0712590159) Description : BRASS STRIP 127X0.4MM IS410 ZN30 O (0712590159)() Specification : BRASS STRIP 127+/-0.5 MM WIDE X 0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN:IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1APRIL-1981, CU ZN 30 CONDITION O (ANNEALED) R Estab
Category : p
Grade : 3
Size : S