1) BUFFER BODY FOR PLATE BACK ASSY. TO DRG. NO. DS CAT NO.1005- 0 06645
Description : BUFFER BODY FOR PLATE BACK ASSY. TO DRG. NO. DS CAT NO.1005- 0 06645()
Specification : BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) BLANK FOR BODY COVER FOR MAG 7 62MM
Description : BLANK FOR BODY COVER FOR MAG 7 62MM()
Specification : BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G
1) BLANK FOR BODY COVER FOR MAG 7 62MM
Description : BLANK FOR BODY COVER FOR MAG 7 62MM()
Specification : BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G
C
Estab
2) Blank for Body Cover Drg. No. 23055A SKM-902*1
Description : Blank for Body Cover Drg. No. 23055A SKM-902*1()
Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902*1,
4) STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 FOR RIFLE 5 56
Description : STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 FOR RIFLE 5 56()
Specification : STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 AS PER DRG. NO. SK-5092*2(RAW MATERIAL SIZE- 40X50 MM BS:970 PT.1-1983,817 M40 "T"(BS:970 EN 24 "T")COND.HARDNESS 248-302 HB AGAINST L.F. NO. 0334032650 WILL BE SUPPLIED BY SAF AGAINST B/G).
C
Estab
5) BLOCK REAR FOR SMALL ARMS
Description : BLOCK REAR FOR SMALL ARMS()
Specification : AS PER DRAWING
C
Estab
6) Input blank of block rear (semi finish) Drg. No. SK-4857*5 For CNC M/C
Description : Input blank of block rear (semi finish) Drg. No. SK-4857*5 For CNC M/C()
Specification : AS PER DRG.
C
Estab
7) BARREL (BLANK) REQUIRED FOR REVOLVER MK-III DRG NO SK-5381R* D.A. NO. 41/08
Description : BARREL (BLANK) REQUIRED FOR REVOLVER MK-III DRG NO SK-5381R* D.A. NO. 41/08()
Specification : BARREL (BLANK) REQUIRED FOR REVOLVER MK-III DRG NO SK-5381R* D.A. NO. 41/08
9) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.
Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
C
Estab
10) BRACKET FOR SMALL ARMS
Description : BRACKET FOR SMALL ARMS()
1) STEEL STRIP 1 MM X 95 MM
Description : STEEL STRIP 1 MM X 95 MM()
Specification : STEEL STRIP 1.0MM X 95.0MM TO SPECN.STEEL BS 1449 PT-1:1983
CS-30. ANNEALED CONDITION.
ALTERNATIVE MATERIAL TO SOECN.BS 1449 PT-1:1983 SEC 4
CONDITION ,A,MATERIAL GD C-S-40 WITH%C RESTRICTED TO 0.4%
(MAXIMUM).(COVER)
R
Estab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) SM SHEET CR
Description : SM SHEET CR()
Specification : SM SHEET CR 1.25X1250X2500MM BS:1449:PT.1:1983 CR-3 SEC.2
OR IS:513:1994 REQD.FOR STOP D S CAT NO 1005-000975 9MM
MAGZINE CARBINE 1A1/CARBURIZING BOX.
R
Estab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Steel Strip 3 18mm X 70mm X 1200mm
Description : Steel Strip 3 18mm X 70mm X 1200mm()
Specification : STEEL STRIP 3.18MM X 70MM X 1200MM FREE CUTTING STEEL IS:4431-1978 GR 14 C14 S14 FOR BRACKET DRG.NO.CQA(I)393/37 FOR CI(A) KIRKEE (IFD).
C
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) STAINLESS STEEL PLATE 316 PER ASTM A 240 PLATE SIZE 56 TX 90L X 110 W IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG[03]()
Specification : STAINLESS STEEL PLATE 316 PER ASTM A 240. PLATE SIZE 56 TX 90L X 110W (IN MM) ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG
R
Nonestab
2) ALLOY STEEL PLATE THICK 12MM SAE 4130 PER SAE AMS 6345 PLATE SIZE 12T X 90L X 80W IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG[02]()
Specification : ALLOY STEEL PLATE THICK 12MM SAE 4130 PER SAE-AMS-6345. PLATE SIZE: 12T X 90L X 80W (IN MM). ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED.FOR SRCG.
R
Nonestab
3) Copper Alloy Bar C90700 Tin branze alloy per SAE 65 or ASTM B505 size dia 28 mm All relevant chemical and mechanical test certificate from NABL accredited LAB to be submitted[07]()
Specification : Copper Alloy Bar C90700 (Tin branze alloy) per SAE 65 or ASTM B505 size dia 28 mm. All relevant chemical and mechanical test certificate from NABL accredited LAB to be submitted.
R
Nonestab
4) STEEL ALLOY BAR SAE 4130 PER SAE AMS S 6758 OR SAE 4340 PER SAE AMS S 5000 ROD DIA 90X154L IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED for SRCG[02]()
Specification : STEEL ALLOY BAR SAE 4130 PER SAE-AMS-S-6758 OR SAE 4340 PER SAE-AMS-S-5000. ROD DIA 90X154L IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED. for SRCG
R
Nonestab
5) ALLOY STEEL PLATE THICK 16 MM SAE 4130 PER SAE AMS 6345 PLATE SIZE 16T X 90L X80W IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG[02]()
Specification : FOR ALLOYSTEELPLATETHICK16MMSAE4130PERSAE-AMS-6345. PLATE SIZE: 16T X 90L X80W (IN MM). ALLRELEVANTTESTCERTIFICATEFROMNABLLABTO BE SUBMITTED.FORSRCG
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION[07]()
Specification : BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) PHOSPHOR BRONZE SIZE 45MM SQUARE X1350 IN MULTIPLE LENGTH SPECN IS 7811 OF 1993[07]()
Specification : PHOSPHOR BRONZE SIZE 45MM SQUARE X1350 IN MULTIPLE LENGTH SPECN IS 7811 OF 1993
R
Estab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SQUARE DRAWN 1 upon 4 Inch ROD FOR FIRING DEVICE[01]()
Specification : SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H
R
Nonestab
2) STEEL STRIP FOR FIRING DEVICE[01]()
Specification : STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD)
R
Nonestab
3) SS WIRE ROD DIA 10MM[01]()
Specification : SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) SQUARE DRAWN ROD FOR FIRING DEVICE
Description : SQUARE DRAWN ROD FOR FIRING DEVICE()
Specification : SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H
R
Estab
2) STEEL SQR 37MM FOR MAG
Description : STEEL SQR 37MM FOR MAG()
Specification : SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION
R
Estab
3) STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19
Description : STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19()
Specification : STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19
R
Estab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).
Description : ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).()
2) STEEL RD 8MM DIA FOR MAG
Description : STEEL RD 8MM DIA FOR MAG()
Specification : BS 970 PT 1:1983 GR 431 S-29 OR 20 S-37 EN 56C
R
Estab
3) ST STRIP
Description : ST STRIP()
Specification : ST.STRIP SIZE:- 1.8MM THICK X270MM WIDE X1600MM LONG TO SPECN. IS:7226-1974 GRADE C-40, COLD ROLLED & ANNEALED CONDN. NOTE:- GRAIN DIRECTION SHOULD BE ALONG THE LENGTH.
R
Estab
4) ST STRIP FOR LMG
Description : ST STRIP FOR LMG()
Specification : ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT).
R
Estab
5) ST STRIP MM FOR REVOLVER
Description : ST STRIP MM FOR REVOLVER()
Specification : ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT).
10) STEEL SQR 37MM FOR MAG
Description : STEEL SQR 37MM FOR MAG()
Specification : SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION
R
Estab
11) STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE
Description : STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE()
Specification : SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE
R
Estab
12) SPG STEEL WIRE 1.216 MM (18SWG)
Description : SPG STEEL WIRE 1.216 MM (18SWG)()
Specification : SPRING STEEL WIRE 18 SWG (0.048") DIA TO SPECIFICATION BS:5216-1991 GD ND-3 REQUIRED FOR SPRING MAIN OF 9MM CARBINE
R
Estab
13) STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION
Description : STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION()
Specification : STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970:PT.1:SEC-2-1983 GD 080M40 TEST PIECE TO BE TESTED AS PER SPECIFIC.MATERIAL SHOULD ALSO SATISFY THE TEST AS LAID DOWN IN THE ANNEXURE.
R
Estab
14) STEEL ROUND 18MM DIA FOR MAG
Description : STEEL ROUND 18MM DIA FOR MAG()
Specification : STEEL ROUND 12MM.DIA TO SPECN.BS:970.PT:1.1983.GD 835-M-15 OR GD-655 M-13.(EN-39B OR 36B) REQUIRED FOR EXTRACTOR SMALL ARMS CARTRIDGE TO DRG NO.ARDE/SK-2689/250.
R
Estab
18) STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19
Description : STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19()
Specification : STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19
R
Estab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) ST FLAT 70X34MM IN HOT ROLLED and ANNEALED CONDITION[01]()
Specification : ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NAT
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) ST FLAT 70X34MM IN HOT ROLLED and ANNEALED CONDITION[01]()
Specification : ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NAT
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FLAT 125X 8X 530 MM LONG IN CUT LENGTH[01]()
Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE
SS +/-0.25MM.
R
Nonestab
2) STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650 C[03]()
Specification : STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907)
R
Nonestab
3) STEEL FL 50X25MM[04]()
Specification : STEEL FL.50X25MM TO IS:5517-1993 GD-40 NI6CR4MO3.
R
Nonestab
4) STEEL FLAT 36 MM X 62 MM[04]()
Specification : STEEL FLAT 36 MM X 62 MM BS: 970 PT-1 1983 GD. 835 M 15 OR EN- 39-B
R
Nonestab
5) Steel Round Dia 28mm[14]()
Specification : STEEL ROUND DIA 28MM SPEC. BS 970 PT-1: 1983-GR-070 M 20
R
Nonestab
6) STEEL SHEET POINT 9MM 20SWG X 1000 X 1500MM FOR STIRKER MECHANISM[01]()
Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM, STEEL IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449 PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD 7606/2.
R
Nonestab
7) STEEL FLAT RECTANGULAR SIZE 40 plus 5 MM X 65 plus 5 MM for TAR[01]()
Specification : STEEL FLAT RECTANGULAR SIZE (40+5)MMX(65+5)MM IN THE LENGTH OF 1.5 TO 3MTR TO SPECN. BS:970 PT1 1983,GR 817 M40 HOT ROLLED AND NORMALISED CONDITION.TEST PIECE HARDNESS TO ACHIEVE 425-475 HV.
R
Nonestab
8) STEEL FLAT SIZE 6 X 22 MM IN HOT ROLLED AND NORMALISED CONDN FOR MAG[01]()
Specification : STEEL FLAT SIZE:- 6 X 22MM IN HOT ROLLED & NORMALISED CONDN.TO SPECIFICATION BS:970:PT.3:1991:GR.070M55 MATERIAL TO BE TESTED IN HARDENED & TEMPERED CONDITION AS PER RULING SECTION & SEPERATE TEST PIECE NEED TO BE HEAT TREATED TO ACHIEVE
R
Nonestab
9) STEEL FLAT 45X50 070M55 OR EN9 FOR MAG[01]()
Specification : STEEL FLAT TO SPECIFICATION IS:5517-1993 DESIGNATION 55C8 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION
R
Nonestab
10) STEEL ROD 30MM DIA[01]()
Specification : Steel Rod 30mm dia. To Specn. IS:5517:1993 Designation 55CB.
R
Nonestab
11) STEEL ROUND DIA 25MM[01]()
Specification : STEEL ROUND DIA 25MM TO AS PER SPEC. IS:4431-1978 DESIGNATION 11C10S25
R
Nonestab
12) STEEL FLAT SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION[01]()
Specification : STEEL FLAT TO SPECIFICATION IS:5517-1993 DESIGNATION 55C8 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION
R
Nonestab
13) STEEL SQUARE 22MM HOT ROLLED AND NORMALISED CONDITION TO SPECN BS 970 PT3 1991 GD070M55[01]()
Specification : STEEL SQR. 22MM (7/8”) HOT ROLLED & NORMALISED CONDITION TO SPECN :BS:970 :PT-3 :1991 GD.070M55
R
Nonestab
14) Steel Flat 75x40mm[01]()
Specification : ST. FLAT 75(+/-5.0)MM X 40(+/-2.0)MM TO SPECN IS:6603-2001, DESIGNATION X12CR12 OR X20CR13. MACRO ETCH TEST & NMIR TEST (FOR MODERATELY/NON-STRESSED(II)) AS PER ANX. ‘A’ NATURE ‘C’
R
Nonestab
15) STEEL RD 25MM DIA[03]()
Specification : STEEL RD 25MM DIA SPECN.IS:6603-2001,DESIG-X15CR16 NI2
HARDENED & TEMPERED BARS TO HARDNESS 265-300 BHN.MACRO ETCH & NMIR TEST(II) TO BE CARRIED OUT AS PER ANNEXURE NATURE `C' (REQUIRED FOR GAS REGULATOR D S CAT NO. 1005-006614)
R
Nonestab
16) STEEL ROUND 18MM DIA[01]()
Specification : STEEL ROUND 18MM DIA TO SPECN:BS:970:PT 1:1983 GD 605 M36
OR GD 606 M36 MACRO ETCH AND NMIR TEST (MODERATELY STRESSED/NON STRESSED
COMPONENTS)AS PER ANNEXURE "A" NATURE-C
1) BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA A DRG NO 13021 0 0 DC I NO 35218 A DT 13 11 91 WITH CUP BOOSTER
Description : BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA A DRG NO 13021 0 0 DC I NO 35218 A DT 13 11 91 WITH CUP BOOSTER()
Specification : BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA(A) DRG. NO.13021-0-0.DC(I). NO.35218-A DT.13-11-91. WITH CUP BOOSTER TO CQA(A) DRG.NO.13032-0-0.DC(I). NO.36804-A DT.1-1-02.SPECN. NO. MIL-F-46996 B(MU),AIDEMEMOIRE B/14 AND CQA(A)PROOF
C
Estab
Category : p
Grade : 1
Size :
O
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) SAFE AND ARMING DEVICE M9040A1 ASSY OF FUZE PDM9030A1 AS PER OFAJ DRG NO FS2650 COMPRISING OF 24 COMPONENTS AS PER LIST ATTACHED AND ACCEPTANCE CRITERIA
Description : SAFE AND ARMING DEVICE M9040A1 ASSY OF FUZE PDM9030A1 AS PER OFAJ DRG NO FS2650 COMPRISING OF 24 COMPONENTS AS PER LIST ATTACHED AND ACCEPTANCE CRITERIA()
Specification : SAFE AND ARMING DEVICE M9040A1 ASSY. OF FUZE PDM9030A1 AS PER OFAJ DRG. NO. FS-2650 COMPRISING OF 24 COMPONENTS AS PER LIST ATTACHED AND ACCEPTANCE CRITERIA
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630
Description : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630()
Specification : NAI(J) 501/6/3(P) FOR Fz DASD AK-630
Specification : STEEL RD 45MM DIA IN HR & NORMALISED CONDN.TO SPECN.BS:970PT -3:1991.GD.070M55.TEST PIECE TO BETESTED AS PER SPECN.MATL. SHOULD ALSO SATISFY THE TEST AS PER ANEX"A"[NMIR HIGHLY STR-ESSED(I)] A SEPERATE TEST PIECES IS TO BE QUENCHED *TEMPE
1) STEEL FORGING FOR CASE OUTER DRG NO 3015202 MSF SK NO F 1171
Description : STEEL FORGING FOR CASE OUTER DRG NO 3015202 MSF SK NO F 1171()
Specification : AS PER DRAWING
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 14 POINT 4 MM DIA IS 4431 1978 REAFFIRMED 2004
Description : STEEL ROD 14 POINT 4 MM DIA IS 4431 1978 REAFFIRMED 2004()
Specification : STEEL ROD 14.4 MM DIA IS 4431-1978 REAFFIRMED 2004
R
Estab
2) STEEL ROD 36MM DIA TO BS 970 GR 230 M 07
Description : STEEL ROD 36MM DIA TO BS 970 GR 230 M 07()
Specification : STEEL ROD 36MM DIA TO BS-970 GR 230M 07
R
Estab
3) STEEL ROD 32MM DIA TO SPCN IS 4431 1978 DESING 4
Description : STEEL ROD 32MM DIA TO SPCN IS 4431 1978 DESING 4()
Specification : STEEL ROD 32MM DIA TO SPCN IS 4431-1978 DESING 4
R
Estab
4) STEEL PIPE 45MM DIA X 8 POINT 5MM THICK TO IS 6603 01
Description : STEEL PIPE 45MM DIA X 8 POINT 5MM THICK TO IS 6603 01()
Specification : STEEL PIPE 45MM DIA X 8.5MM THICK TO IS:6603-01
R
Estab
5) DISCHARGE TUBE SIZE 18MM OD X 16MM ID X 1700MM
Description : DISCHARGE TUBE SIZE 18MM OD X 16MM ID X 1700MM()
Specification : DISCHARGE TUBE SIZE: 18MM OD X 16MM ID X 1700MM
R
Estab
6) STEELL TUBE OD 38MM ID 20MM TO IS 3074 05
Description : STEELL TUBE OD 38MM ID 20MM TO IS 3074 05()
Specification : STEELL TUBE OD 38MM ID 20MM TO IS:3074-05
R
Estab
7) STEEL ROUND 30MM DIA BS 970 PART I 1983 GRD 8
Description : STEEL ROUND 30MM DIA BS 970 PART I 1983 GRD 8()
Specification : STEEL ROUND 30MM DIA ,BS:970 PART-I-1983 GRD 8
R
Estab
8) STEEL ROUND 40MM DIA BS 970 PART I 1983 GRD 8
Description : STEEL ROUND 40MM DIA BS 970 PART I 1983 GRD 8()
Specification : STEEL ROUND 40MM DIA ,BS:970 PART-I-1983 GRD 8
R
Estab
9) STEEL ROUND 70MM PLUS MINUS 2MM DIA X 2 POINT 5 MTRS TO 3 MTRS
Description : STEEL ROUND 70MM PLUS MINUS 2MM DIA X 2 POINT 5 MTRS TO 3 MTRS()
Specification : STEEL ROUND 70MM +/- 2MM DIA X 2.5 MTRS TO 3.0 MTRS
R
Estab
10) STEEL ROUND 50MM DIA BS 970 PART I 1983 GRD 8
Description : STEEL ROUND 50MM DIA BS 970 PART I 1983 GRD 8()
Specification : STEEL ROUND 50MM DIA ,BS:970 PART-I-1983 GRD 8
R
Estab
11) STEEL FLAT 2 X 1 BS 970 PART I 1983 GRD 835 M 30
Description : STEEL FLAT 2 X 1 BS 970 PART I 1983 GRD 835 M 30()
Specification : STEEL FLAT 2'' X 1'' , BS 970 PART-I-1983 GRD-835 M 30
R
Estab
12) STEEL ROUND 5 POINT 5MM DIA IS 4431 1978
Description : STEEL ROUND 5 POINT 5MM DIA IS 4431 1978()
Specification : STEEL ROUND 5.5MM DIA , IS 4431 1978
R
Estab
13) STEEL ROUND 1 INCH DIA BS 970 PT I 070 M 20
Description : STEEL ROUND 1 INCH DIA BS 970 PT I 070 M 20()
Specification : STEEL ROUND 1'' DIA ,BS 970 PT-I:070 M-20
R
Estab
14) STEEL ROD 80MM DIA TO SPCN IS 1367 PT 6 91
Description : STEEL ROD 80MM DIA TO SPCN IS 1367 PT 6 91()
Specification : STEEL ROD 80MM DIA TO SPCN IS:1367 (PT-6)-91
R
Estab
15) STEEL ROD 16MM DIA TO SPCN IS 1367 PT 6 91
Description : STEEL ROD 16MM DIA TO SPCN IS 1367 PT 6 91()
Specification : STEEL ROD 16MM DIA TO SPCN IS:1367 (PT-6)-91
R
Estab
16) STEEL BLOCK 55MM X 22MM TO IS 5517 93
Description : STEEL BLOCK 55MM X 22MM TO IS 5517 93()
Specification : STEEL BLOCK 55MM X 22MM TO IS:5517-93
R
Estab
17) STEEL BLOCK IS 6603 01
Description : STEEL BLOCK IS 6603 01()
Specification : STEEL BLOCK 50MM X 50MM TO SPCN IS 6603-01
R
Estab
18) STEEL ROD 13 MM PLUS MINUS 0 POINT 1MM DIA TO SPCN BS 970 PT 1 ST
Description : STEEL ROD 13 MM PLUS MINUS 0 POINT 1MM DIA TO SPCN BS 970 PT 1 ST()
Specification : STEEL ROD 13 MM +/- 0.1MM DIA TO SPCN BS 970 PT-1 ST
R
Estab
19) STEEL BLOCK 45MM X 45MM TO IS 5517 93
Description : STEEL BLOCK 45MM X 45MM TO IS 5517 93()
Specification : STEEL BLOCK 45MM X 45MM TO IS 5517-93
R
Estab
20) STEEL BLOCK TO SPCN IS 4367 91
Description : STEEL BLOCK TO SPCN IS 4367 91()
Specification : STEEL BLOCK TO SPCN IS 4367-91
R
Estab
21) STEEL ROD DIA 30 MM TO IS 5517 04 DESIGN 50C8
Description : STEEL ROD DIA 30 MM TO IS 5517 04 DESIGN 50C8()
Specification : STEEL ROD DIA 30 MM TO IS:5517-04 DESIGN 50C8
R
Estab
22) STEEL ROD DIA 40 DESIG 20MN5CR5
Description : STEEL ROD DIA 40 DESIG 20MN5CR5()
Specification : STEEL ROD DIA 40 TO IS:4367-91, DESIG 20MN5CR5
R
Estab
23) STEEL ROD 45MM DIA TO SPCN IS 5517 93
Description : STEEL ROD 45MM DIA TO SPCN IS 5517 93()
Specification : STEEL ROD 45MM DIA TO SPCN IS: 5517-93
R
Estab
24) STEEL BLOCK 50MM X 60MM TO SPCN IS 7806 93
Description : STEEL BLOCK 50MM X 60MM TO SPCN IS 7806 93()
Specification : STEEL BLOCK 50MM X 60MM TO SPCN IS:7806-93
R
Estab
25) STEEL BLOCK 30MM X 45 MM MULTIPLE LENGTH OF 245 MM
Description : STEEL BLOCK 30MM X 45 MM MULTIPLE LENGTH OF 245 MM()
Specification : STEEL BLOCK 30MM X 45 MM MULTIPLE LENGTH OF 245 MM
R
Estab
26) STEEL ROD 85MM DIA TO SPCN IS 5517 93
Description : STEEL ROD 85MM DIA TO SPCN IS 5517 93()
Specification : STEEL ROD 85MM DIA TO SPCN IS 5517 93
R
Estab
27) STEEL ROD 15MM DIA TO SPCN IS 5517 93
Description : STEEL ROD 15MM DIA TO SPCN IS 5517 93()
Specification : STEEL ROD 15MM DIA TO SPCN IS 5517 93
R
Estab
28) STEEL ROD 20MM DIA TO STD LENGTH TO IS 11169 PT 1
Description : STEEL ROD 20MM DIA TO STD LENGTH TO IS 11169 PT 1()
Specification : STEEL ROD 20MM DIA TO STD LENGTH TO IS 11169(PT-1)
R
Estab
29) STEEL ROD 30MM DIA TO SPCN IS 5517 93
Description : STEEL ROD 30MM DIA TO SPCN IS 5517 93()
Specification : STEEL ROD 30MM DIA TO SPCN IS 5517 93
R
Estab
30) STEEL ROD 15 MM DIA SPCN IS 5517 93
Description : STEEL ROD 15 MM DIA SPCN IS 5517 93()
Specification : STEEL ROD 15 MM DIA SPCN - IS : 5517-93
R
Estab
31) STEEL ROD 15 MM DIA TO SPECN IS 11169 PT 1 84
Description : STEEL ROD 15 MM DIA TO SPECN IS 11169 PT 1 84()
Specification : STEEL ROD 15 MM DIA TO SPECN IS 11169 (PT-1)- 84
R
Estab
32) STEEL PLATE SIZE 110MM X 110MM X 30MM DEF 13
Description : STEEL PLATE SIZE 110MM X 110MM X 30MM DEF 13()
Specification : STEEL PLATE SIZE 110MM X 110MM X 30MM DEF 13
R
Estab
33) STEEL PLATE SIZE 155MM X 95MM X 20MM
Description : STEEL PLATE SIZE 155MM X 95MM X 20MM()
Specification : STEEL PLATE SIZE 155MM X 95MM X 20MM
R
Estab
34) STEEL FLAT GR 2 DEF 13
Description : STEEL FLAT GR 2 DEF 13()
38) STEEL FLAT SIZE 32 PLUS MINUS 0 POINT 5 MM X 15 PLUS MINUS 0 POINT 5 MM X MULTIPLE LENGTH
Description : STEEL FLAT SIZE 32 PLUS MINUS 0 POINT 5 MM X 15 PLUS MINUS 0 POINT 5 MM X MULTIPLE LENGTH()
Specification : STEEL FLAT SIZE 32 +/-0.5 MM X 15 +/-0.5 MM X MULTIPLE LENGTH
R
Estab
39) STEEL FLAT 12MM X 20MM WIDTH TO SPCN EN 10277 5
Description : STEEL FLAT 12MM X 20MM WIDTH TO SPCN EN 10277 5()
Specification : STEEL FLAT 12MM X 20MM WIDTH TO SPCN EN 10277-5
R
Estab
40) STEEL ROUND 38 MM DIA BS 970 PT I 080 M 36
Description : STEEL ROUND 38 MM DIA BS 970 PT I 080 M 36()
Specification : STEEL ROUND 38 MM DIA BS 970 PT-I : 080 M 36
R
Estab
41) STEEL ROUND 20 MM DIA BS 970 PT I 080 M 40
Description : STEEL ROUND 20 MM DIA BS 970 PT I 080 M 40()
Specification : STEEL ROUND 20 MM DIA BS 970 PT-I : 080 M 40
R
Estab
42) STEEL ROUND POINT 22 INCH DIA BS 970 EN 8
Description : STEEL ROUND POINT 22 INCH DIA BS 970 EN 8()
Specification : STEEL ROUND .22'' DIA BS 970 EN-8
R
Estab
43) STEEL ROUND 13 MM DIA BS 970 PT 1 1983 GR 080 M 40
Description : STEEL ROUND 13 MM DIA BS 970 PT 1 1983 GR 080 M 40()
Specification : STEEL ROUND 13 MM DIA BS 970 PT-1 :1983 GR 080 M 40
R
Estab
44) STEEL FLAT 16 X 35 MM TO BS 970 PT 1 83 GR 080 M40
Description : STEEL FLAT 16 X 35 MM TO BS 970 PT 1 83 GR 080 M40()
Specification : STEEL FLAT 16 X 35 MM TO BS-970,PT-1:83 GR.080M40
R
Estab
45) STEEL TUBE 6 MM OD X 3 MM ID TO SIS 1312 ALT EN
Description : STEEL TUBE 6 MM OD X 3 MM ID TO SIS 1312 ALT EN()
Specification : STEEL TUBE 6MM O/D X 3MM I/D TO SIS:1312 ALT EN
R
Estab
46) STEEL ROUND 6 POINT 5 MM 0 POINT 018 MM DIA BS 970 PART 1 80 M 50
Description : STEEL ROUND 6 POINT 5 MM 0 POINT 018 MM DIA BS 970 PART 1 80 M 50()
Specification : STEEL ROUND 6.5MM - 0.018 MM DIA ,BS 970 PART-1 80 M 50
R
Estab
47) STEEL ROD 7 MM DIA TO SPECN BS 970 PT 1 GRADE 080M
Description : STEEL ROD 7 MM DIA TO SPECN BS 970 PT 1 GRADE 080M()
Specification : STEEL ROD 7 MM DIA TO SPECN , BS : 970 PT : 1 GRADE: 080 M
R
Estab
48) STEEL ROUND 3 POINT 5 MM PLUS MINUS 0 POINT 025 MM DIA LENGTH 1 MTR
Description : STEEL ROUND 3 POINT 5 MM PLUS MINUS 0 POINT 025 MM DIA LENGTH 1 MTR()
49) STEEL ROUND 5 POINT 588 MM PLUS MINUS 0 POINT 127 MM DIA TO SPCN BS 970 EN
Description : STEEL ROUND 5 POINT 588 MM PLUS MINUS 0 POINT 127 MM DIA TO SPCN BS 970 EN()
Specification : STEEL ROUND 5.588MM +/- 0.127MM DIA TO SPCN BS 970 EN
R
Estab
50) STEEL ROD 7POINT9 MM DIA TO SPECN BS 970 EN 9
Description : STEEL ROD 7POINT9 MM DIA TO SPECN BS 970 EN 9()
Specification : STEEL ROD 7.9MM DIA TO SPECN BS 970 EN-9
R
Estab
51) STEEL ROUND 7 BY 8 INCH 22 MM DIA BS 970 EN 9
Description : STEEL ROUND 7 BY 8 INCH 22 MM DIA BS 970 EN 9()
66) STEEL ROUND 7 BY 8 INCHES DIA TO EN 19B
Description : STEEL ROUND 7 BY 8 INCHES DIA TO EN 19B()
Specification : STEEL ROUND 7/8'' DIA TO EN-19B
R
Estab
67) STEEL ROD 82 MM DIA TO SPECN IS 1367 PART 6 91
Description : STEEL ROD 82 MM DIA TO SPECN IS 1367 PART 6 91()
Specification : STEEL ROD 82 MM DIA TO SPECN IS:1367 (PT-6)-91
R
Estab
68) STEEL ROUND 1 3 BY 4 INCHES DIA TO SPCN BS 970 EN 19T
Description : STEEL ROUND 1 3 BY 4 INCHES DIA TO SPCN BS 970 EN 19T()
Specification : STEEL ROUND 1 3/4'' DIA TO SPCN BS 970 EN -19T
R
Estab
69) STEEL ROD 16MM DIA TO EN 10277 5 1 POINT 8159 PLUS A PLUS SH
Description : STEEL ROD 16MM DIA TO EN 10277 5 1 POINT 8159 PLUS A PLUS SH()
Specification : STEEL ROD 16MM DIA TO EN 10277-5-1.8159+A+SH
R
Estab
70) STEEL ROD 20MM DIA BS 970 PT I 1983 GDE 709 M 40
Description : STEEL ROD 20MM DIA BS 970 PT I 1983 GDE 709 M 40()
Specification : STEEL ROD 20MM DIA BS 970 PT-I:1983 GDE 709 M 40
R
Estab
71) STEEL SHEET THK 4 MM SPCN IS 5986 02 FE 410
Description : STEEL SHEET THK 4 MM SPCN IS 5986 02 FE 410()
Specification : STEEL SHEET THK 4 MM SPCN IS:5986-02 FE 410
R
Estab
72) STEEL PLATE 50MM X 75MM TO SPCN IS 7806 93
Description : STEEL PLATE 50MM X 75MM TO SPCN IS 7806 93()
Specification : STEEL SHEET 50MM X 75MM TO SPCN IS:7806-93
R
Estab
73) 3MM THICK STEEL SHEET TO SPCN IS 14491 97
Description : 3MM THICK STEEL SHEET TO SPCN IS 14491 97()
Specification : 3MM THICK STEEL SHEET TO SPCN IS:14491-97
R
Estab
74) 2MM THICK STEEL SHEET TO SPCN IS 6911 92 GRADE XO
Description : 2MM THICK STEEL SHEET TO SPCN IS 6911 92 GRADE XO()
Specification : 2MM THICK STEEL SHEET TO SPCN IS:6911-92 GRADE XO
R
Estab
Category : s
Grade : 3
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) HONING HEAD OF HONING BAR ASSY FOR 0 POINT 32 INCHES PISTOL
Description : HONING HEAD OF HONING BAR ASSY FOR 0 POINT 32 INCHES PISTOL()
Specification : HONING HEAD OF HONING BAR ASSY FOR 0.32'' PISTOL
C
Estab
2) CATCH MAGAZINE TO SK NO CTM 0032 A PB 9 WITHOUT NICKEL PLATING IN FINISHED CONDITION
Description : CATCH MAGAZINE TO SK NO CTM 0032 A PB 9 WITHOUT NICKEL PLATING IN FINISHED CONDITION()
Specification : CATCH MAGAZINE TO SK.NO.CTM-0032 A (PB-9) WITHOUT NICKEL PLATING IN FINISHED CONDITION.
C
Estab
3) SPRING PIN FIRING TO DRG NO M 8279 PB 29 F C
Description : SPRING PIN FIRING TO DRG NO M 8279 PB 29 F C()
Specification : SPRING PIN FIRING TO DRG NO M-8279 (PB-29) F/C
C
Estab
4) SPRING EXTRACTOR TO DRG NO M 8280 PB 30 F C
Description : SPRING EXTRACTOR TO DRG NO M 8280 PB 30 F C()
Specification : SPRING EXTRACTOR TO DRG NO M-8280 (PB-30) F/C
C
Estab
5) SCREW DRIVER TO DRG NO 5064158 IN FC
Description : SCREW DRIVER TO DRG NO 5064158 IN FC()
Specification : SCREW DRIVER TO DRG. NO. 5064158 IN F/C
C
Estab
6) SCREW SUPPORTING BRACKET TO DRG NO 1250
Description : SCREW SUPPORTING BRACKET TO DRG NO 1250()
Specification : SCREW SUPPORTING BRACKET TO DRG NO 1250
C
Estab
7) REAR SIGHT SPRING 125041
Description : REAR SIGHT SPRING 125041()
Specification : REAR SIGHT SPRING TO DRG NO IRCL 531 (GF-125041 K)
C
Estab
8) SCREW RANGE INDICATOR TO DRG NO MCS 3X6
Description : SCREW RANGE INDICATOR TO DRG NO MCS 3X6()
Specification : SCREW RANGE INDICATOR TO DRG. NO. MCS-3X6
C
Estab
9) WASHER RUBBER PLATE TO DRG NO GF 215020
Description : WASHER RUBBER PLATE TO DRG NO GF 215020()
Specification : WASHER RUBBER PLATE TO DRG NO GF 215020
C
Estab
10) SCREW SHOULDER PAD TO DRG NO GF 165009
Description : SCREW SHOULDER PAD TO DRG NO GF 165009()
Specification : SCREW SHOULDER PAD TO DRG NO GF-165009
C
Estab
11) SCREW FRONT GRIP TO DRG NO 165019
Description : SCREW FRONT GRIP TO DRG NO 165019()
Specification : SCREW FRONT GRIP TO DRG NO 165019
C
Estab
12) AXIS PIN TRIGGER TO DRG NO 125073
Description : AXIS PIN TRIGGER TO DRG NO 125073()
Specification : AXIS PIN TRIGGER TO DRG NO -125073
C
Estab
13) AXIS PIN TRIGGER SEAR TO DRG NO 125074
Description : AXIS PIN TRIGGER SEAR TO DRG NO 125074()
Specification : AXIS PIN TRIGGER SEAR TO DRG NO-125074
C
Estab
14) DRIFT TO DRG NO GF 165072 DC I NO 18893 DT 15 1 05
Description : DRIFT TO DRG NO GF 165072 DC I NO 18893 DT 15 1 05()
Specification : DRIFT TO DRG NO GF 165072 DC(I) NO 18893 DT 15.01.05
C
Estab
15) ADJUSTING SCREW TO DS CAT NO 5305 009906
Description : ADJUSTING SCREW TO DS CAT NO 5305 009906()
Specification : ADJUSTING SCREW TO D.S CAT NO 5305-009906
C
Estab
16) SCREW TENSION JAW FRONT GRIP SH PAD
Description : SCREW TENSION JAW FRONT GRIP SH PAD()
Specification : SCREW TENSION JAW FRONT GRIP & SH. PAD
C
Estab
17) SCREW SET CRANK HANDLE ITEM 5 RGF 10819 98 FC
Description : SCREW SET CRANK HANDLE ITEM 5 RGF 10819 98 FC()
Specification : SCREW SET CRANK HANDLE (ITEM 5) RGF-10819/98 F/C
C
Estab
18) SCREW FIXING ITEM 8 RGF 10819 98 CO 827 FC
Description : SCREW FIXING ITEM 8 RGF 10819 98 CO 827 FC()
1) Casing to Drg. No. 0068/3 required for Head Assy. to Drg. No. AAIW/BS-0068 for 100-120 Kgs for Aeria
Description : Casing to Drg. No. 0068/3 required for Head Assy. to Drg. No. AAIW/BS-0068 for 100-120 Kgs for Aeria()
Specification : As per Drg. & Specification
C
Estab
2) SUSPENSION LUG. SUSPENSION LUG, AS PER DRG. NO. AQAW(A)/SK/MISC/14/1
Description : SUSPENSION LUG. SUSPENSION LUG, AS PER DRG. NO. AQAW(A)/SK/MISC/14/1()
Specification : SUSPENSION LUG.
SUSPENSION LUG, AS PER DRG. NO. AQAW(A)/SK/MISC/14/1
C
Estab
Category : p
Grade : 3
Size :
S
3589
BHILAI ENGINEERING CORPORATION LIMITED
HATHKHOJ VILLAGE INDUSTRIAL AREA 490026 BHILAI CHHATTISGARH HATHKHOJ VILLAGE INDUSTRIAL AREA BHILAI Chhattisgarh
PIN1 : 490026
Phone No. : 4088264 GSTIN : 22AAACB9272A9ZZ
Specification : CHEST RIFLE 5.56MM WOODEN CAPACITY 10 RIFLES WITH ACCESSORIES TO DRG NO CQA(SA)SK-625 D.S.CAT NO.1005-560403 SHT NO. 1&2 DC(I) NO-26483 SA DT 11-01-10 FOR SHT-1 DC(I) NO-26526 SA DT 22-07-10 FOR SHT-2
E
Estab
3) TIMBER SOFTWOOD CONIFEROUS PLANKS , BATTENS , SCANTLINGS OF ALL GRADES
Description : TIMBER SOFTWOOD CONIFEROUS PLANKS , BATTENS , SCANTLINGS OF ALL GRADES()
Specification : TAPE COTTON WHITE UNPROOFED FOR AMMUNITION PURPOSES 6 MM PLUS OR MINUS 1.5 MM WIDE CONFORMING TO SPECIFICATION IND/ME/888(PROV) DC 3754-ME DT.12/12/02.
R
Estab
2) CLOTH COTTON DOWN TIGHT WHITE FOR M4A2 &CH 9
Description : CLOTH COTTON DOWN TIGHT WHITE FOR M4A2 &CH 9()
Specification : WHITE COLOURED CLOTH COTTON DOWN TIGHT TO SPECN. IND/ME/1005 (OCT.2012), DC 5105-ME DT.27-04-2013, WIDTH:1400 MM.
R
Estab
3) CIRCULAR PLAITED SHOE LACE FOR CHARGE-9
Description : CIRCULAR PLAITED SHOE LACE FOR CHARGE-9()
Specification : CIRCULAR PLAITED SHOE LACE FOR CHARGE-9 AS PER DRG. NO. CI(A) 6355595 AND CQA(A) 6391044.
R
Estab
4) TAPE COTTON RED FAST COLOUR
Description : TAPE COTTON RED FAST COLOUR()
Specification : TAPE COTTON RED FAST COLOUR, 13-1.5 MM WIDE, WEAVE PLAIN FOR TWILL, TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%, BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N. AS PER IS:3255-19
R
Estab
5) SURGICAL HAND GLOVES S-7 1/2"
Description : SURGICAL HAND GLOVES S-7 1/2"()
Specification : SURGICAL HAND GLOVES S-7 1/2" (SEVEN AND HALF) ISI MARKED, NO. IS-4148 (DIALOMATIC)
R
Estab
Category : p
Grade : 2
Size :
S
3596
CIRCLIPS INDIA PVT.LTD
O-5 & 6, STAR TRADE CENTRE SODAWALA LANE, BORIVALI MUMBAI MAHARASHTRA
PIN1 : 400092
Phone No. : 9819189690
1) CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R
Description : CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R()
Specification : CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R NOTE:CORD NYLON SIZE 1.6MMX2MTR WITH QUALITY PLATED HOOK OF MATCHING COLOUR- BLACK/BROWN/BURGANDI
E
Estab
2) USER MANUAL OF REVOLVER
Description : USER MANUAL OF REVOLVER()
Specification : USER'S MANUAL FOR REVOLVER 32(7.65MM)(MODIFIED) INHINDI & ENGLISH (BILINGUAL) IN BOOKLET FORM WITH ENVELOP,
E
Estab
3) CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE
Description : CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE()
Specification : CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE
E
Estab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) CLIP COVER FOR REVOLVER DRG NO SK 5573 R
Description : CLIP COVER FOR REVOLVER DRG NO SK 5573 R()
Specification : CLIP COVER FOR REVOLVER, DRG. NO. SK- 5573R NOTE: REVOLVER CLIP COVER OF BUFF BURNISH (HARDNESS LEATHER) DRUM DYED AS PER IS:580 COLOUR:BLACK/BROWN/BURGANDI
C
Estab
2) CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R
Description : CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R()
Specification : CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R NOTE:CORD NYLON SIZE 1.6MMX2MTR WITH QUALITY PLATED HOOK OF MATCHING COLOUR- BLACK/BROWN/BURGANDI
C
Estab
3) USER MANUAL OF REVOLVER
Description : USER MANUAL OF REVOLVER()
Specification : USER'S MANUAL FOR REVOLVER 32(7.65MM)(MODIFIED) INHINDI & ENGLISH (BILINGUAL) IN BOOKLET FORM WITH ENVELOP,
C
Estab
4) CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE
Description : CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE()
Specification : CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE
Specification : TAPE COTTON WHITE UNPROOFED FOR AMMUNITION PURPOSES 6 MM PLUS OR MINUS 1.5 MM WIDE CONFORMING TO SPECIFICATION IND/ME/888(PROV) DC 3754-ME DT.12/12/02.
R
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 2101774185 TAPE COTTON M PROOFED 25 MM WIDE.
Description : 2101774185 TAPE COTTON M PROOFED 25 MM WIDE.()
Specification : BAGS CALICO FOR 40 KG M.T PROPELLANTS MADE OUT OF CALICO CLOTH AND AS PER CFA DRG NO.1037 DATED 24.12.2013 SPECN-IS-5088-1982 (FIRST REV) WITH AMENDMENT NO.2 OCT 1996 REAFD 2017-FOR CLOTH
1) Receiver Blank to Drg No M 9403B
Description : Receiver Blank to Drg No M 9403B()
Specification : Store Drg No M-8194B
C
Estab
2) RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B
Description : RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B()
Specification : AS PER DRAWING
C
Estab
3) SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol
Description : SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol()
Specification : SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol
C
Estab
4) MAGAZINE BOX AK 630 ASSY. 01
Description : MAGAZINE BOX AK 630 ASSY. 01()
Specification : AS PER REQUIRED DRG.
C
Estab
5) MACHINING OF CRADEL
Description : MACHINING OF CRADEL()
Specification : MACHINING OF CRADEL FOR AK-630M TO SB-101 FROM CAS
C
Estab
6) WIRE CUT OPERATION OF 3 PDR BODY BREECH END DRG N
Description : WIRE CUT OPERATION OF 3 PDR BODY BREECH END DRG N()
Specification : WIRE CUT OPERATION OF 3 PDR BODY BREECH END DRG NO. NAD 1025/2 ARD 2431
