List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
3521 RAJESH ENGINEERING WORKS
S.No. 36, Galande Industrial Estate, Vadgaonsheri, Pune-Nagar Road,Mojeshwadi, Pune, MaharashtraPIN1 : 411014 Pune-Nagar Road, Vadgaon Sheri Pune Maharashtra
PIN1 : 411014
Phone No. : 24268994
GSTIN : 27ARQPK4132J1ZI 		ARQPK4132J

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) PYRO CARTRIDGE YDP 1 2 ASSY EMPTY[60]() Specification : DRG. NO. NASK 1015 (PROV) DT. 04.12.2009 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PYRO CARTG.YDP 1-3 DRG.NAI(MB)9553[60]() Specification : DRG. NO. NASK 994 (PROV) DT.03-07-2008 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) COMPONENTS FOR PYRO CTG YDP 4-2[60]() Specification : DRG. NO. NASK 1016 ( PROVISIONAL ) C Nonestab
2) PYRO CARTG.YDP 3-3 DRG.NASK 995.[60]() Specification : DRG. NO. NASK 995 (PROV) DT.02.12.2008 C Nonestab
3) PYRO CARTG.YDP 1-3 DRG.NAI(MB)9553[60]() Specification : DRG. NO. NASK 994 (PROV) DT.03-07-2008 R Nonestab
4) SET OF COMPONENTS FOR PYRO CARTRG.[60]() Specification : DRG ERDL 898 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PYRO CARTG.YDP 3-3 DRG.NASK 995.[60]() Specification : DRG. NO. NASK 995 (PROV) DT.02.12.2008 C Nonestab
2) PYRO CARTG.YDP 1-3 DRG.NAI(MB)9553[60]() Specification : DRG. NO. NASK 994 (PROV) DT.03-07-2008 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330685101 L T SQUIB PLUG BRIDGED TO DRG 563[63]() Specification : L.T.SQUIB BRIDGED TO DRG NO.ERDL 563 DETAIL NO. 6 & 7 ( 7- STRAND TINNED COPPER WIRE TO DEF STANDARD -61-12 PART 6/ISSUE 4 WILL BW SUPPLIED BY OFCH) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CARTG PP3 EOFE EMPTY ASSY TRD 1279 LF 9911351544[99]() Specification : CARTG PP-3 EOFE & EMPTY (ASSY) TO DRG. NO. TRD/1279 & SPECN NO. ARDE/SPECN/23 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) GROUND STAINLESS STEEL ROD TO SPECIFICATION IS 6603 GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 27MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS Description : GROUND STAINLESS STEEL ROD TO SPECIFICATION IS 6603 GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 27MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS() Specification : GROUND STAINLESS STEEL ROD TO SPECIFICATION IS:6603, GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 27MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS R Estab
2) GROUND STAINLESS STEEL ROD TO SPECIFICATION IS 6603 GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 20MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS Description : GROUND STAINLESS STEEL ROD TO SPECIFICATION IS 6603 GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 20MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS() Specification : GROUND STAINLESS STEEL ROD TO SPECIFICATION IS:6603, GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 20MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS R Estab
3) GROUND STEEL ROD TO SPECIFICATION IS 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 11M 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS HARDNESS 300 to 340HV Description : GROUND STEEL ROD TO SPECIFICATION IS 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 11M 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS HARDNESS 300 to 340HV() Specification : GROUND STEEL ROD TO SPECIFICATION IS: 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 11MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS. HARDNESS – 300 to 340HV R Estab
4) GROUND STEEL ROD TO SPECIFICATION IS 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 17MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS HARDNESS 300 to 340HV Description : GROUND STEEL ROD TO SPECIFICATION IS 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 17MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS HARDNESS 300 to 340HV() Specification : GROUND STEEL ROD TO SPECIFICATION IS:5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 17MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS.HARDNESS – 300 to 340HV R Estab
5) BRASS ROD TO SPECIFICATION IS 4170 GRADE CUZN40 IN AS MANUFACTURED CONDITION TO SIZE 3MM DIA O POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS Description : BRASS ROD TO SPECIFICATION IS 4170 GRADE CUZN40 IN AS MANUFACTURED CONDITION TO SIZE 3MM DIA O POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS() Specification : BRASS ROD TO SPECIFICATION IS 4170 GRADE CUZN40 IN AS MANUFACTURED CONDITION TO SIZE 3MM DIA +/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS R Estab
6) COPPER ROD TO SPECIFICATION IS 4171 IN AS MANUFACTURED CONDITION HAVING DIA 5MM 0 POINT 05 MM Description : COPPER ROD TO SPECIFICATION IS 4171 IN AS MANUFACTURED CONDITION HAVING DIA 5MM 0 POINT 05 MM() Specification : COPPER ROD TO SPECIFICATION IS 4171 IN AS MANUFACTURED CONDITION HAVING DIA 5MM+/-0.05MM R Estab
7) WASHER I TO ARDE DRG NO 0901 00 00 00 00 001 00PB Description : WASHER I TO ARDE DRG NO 0901 00 00 00 00 001 00PB() Specification : WASHER-I TO ARDE DRG.NO.0901 00 00 00 00 001 00PB C Estab
8) WASHER II TO ARDE DRG NO 0901 00 00 00 00 002 00PB Description : WASHER II TO ARDE DRG NO 0901 00 00 00 00 002 00PB() Specification : WASHER-II TO ARDE DRG.NO.0901 00 00 00 00 002 00PB C Estab
9) GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN IND ME 951 PROV GRADE A OR MOULDING POWER TO SPECN JSS 9330 05 TYPE I Description : GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN IND ME 951 PROV GRADE A OR MOULDING POWER TO SPECN JSS 9330 05 TYPE I() Specification : GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN IND ME 951 PROV GRADE A OR MOULDING POWER TO SPECN JSS 9330 05 TYPE I R Estab
10) NICKEL CHROMIUM WIRE APPROX 80 20 Ni Cr DIAMETER 0 0305MM NOMINAL RESISITANCE 1481 OHMS 12 5 PERCENT PER METER TO B S 1117 PT 2 1964 TYPE 3 GRADE C4 Description : NICKEL CHROMIUM WIRE APPROX 80 20 Ni Cr DIAMETER 0 0305MM NOMINAL RESISITANCE 1481 OHMS 12 5 PERCENT PER METER TO B S 1117 PT 2 1964 TYPE 3 GRADE C4() Specification : NICKEL CHROMIUM WIRE APPROX 80:20 Ni:Cr DIAMETER 0.0305MM NOMINAL RESISITANCE 1481 OHMS+/-12.5% PER METER TO B.S. 1117 PT 2 1964,TYPE 3 GRADE C4 R Estab
11) TRANSIT CAP TO ARDE DRG NO 0901 00 02 01 00 005 00PB FOR SQUIB HOUSING ASSY EMPTY TO DRG NO 0901 00 00 02 01 000 00PB Description : TRANSIT CAP TO ARDE DRG NO 0901 00 02 01 00 005 00PB FOR SQUIB HOUSING ASSY EMPTY TO DRG NO 0901 00 00 02 01 000 00PB() Specification : TRANSIT CAP TO ARDE DRG.NO. 0901 00 02 01 00 005 00PB (FOR SQUIB HOUSING ASSY (EMPTY) TO DRG.NO. 0901 00 00 02 01 000 00PB) C Estab
12) SAFETY CUP TO DRG NO 0901 00 02 01 00 006 00PB Description : SAFETY CUP TO DRG NO 0901 00 02 01 00 006 00PB() Specification : SAFETY CUP TO DRG.NO.0901 00 02 01 00 006 00PB C Estab
13) CELLULOID DISC TO ARDE DRG NO 0901 00 01 01 00 004 00PB FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB Description : CELLULOID DISC TO ARDE DRG NO 0901 00 01 01 00 004 00PB FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB() Specification : CELLULOID DISC TO ARDE DRG.NO. 0901 00 01 01 00 004 00PB (FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB) C Estab
14) PTFE DISC TO ARDE DRGNO 0901 00 01 01 00 005 00PB FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB Description : PTFE DISC TO ARDE DRGNO 0901 00 01 01 00 005 00PB FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB() Specification : PTFE DISC TO ARDE DRG.NO. 0901 00 01 01 00 005 00PB (FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB) C Estab
15) CUP TO ARDE DRG NO 0901 00 01 01 00 007 00PB FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB Description : CUP TO ARDE DRG NO 0901 00 01 01 00 007 00PB FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB() Specification : CUP TO ARDE DRG.NO. 0901 00 01 01 00 007 00PB (FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB) C Estab
Category : p
Grade : 3
Size : O
1) Ordnance Factory Bolangir
Name Specification Use Status
1) CAP KG 4 FOR A30 T DETONATOR[65]() Specification : CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10 C Nonestab
2) TUBE EXPLODER NOSE TO DRG NO ARM 6221010211[62]() Specification : TUBE EXPLODER NOSE TO DRG.NO. ARM- 1172 B-22 Dt.24-11-79. C Nonestab
3) TUBE EXPLODER REAR TO DRG NO ARM 6221010201[62]() Specification : TUBE EXPLODER REAR TO DRG.NO. ARM- 1172 B-23. C Nonestab
4) SQUIB EMPTY[63]() Specification : SQUIB EMPTY: ERDL DRG.971, DET NO. 05 DT:10.10.88 C Nonestab
5) PRIMER ELECTRIC NO N30MK1 EMPTY[62]() ERDL DRG 971, DET NO.1ARD NO-2374 DT.31.01.08 SPECIFICATION:ERDL/PYRO/PS-152(a) CONSISTING OF(01)BODY TO DRG NO.NAD 1589/1/1 ARD-2371 DT.24.07.07(QTY 01 NO.), (02) CONTACT BOLT: ERDL DRG 971 DET NO.3ARD-2403 DT.19.04.10(QTY-01 NO.),(03)PRIMER MAGAZINE CUP C Nonestab
6) CUP YA 5 FOR A30 T DET[65]() Specification : CUP YA-5 FOR A30-T (DET) TO DRG.NO. FOR PRIMER A-30-T CQA(A)/AMN/2856 DC NO. 37271-A, DT.08.11.10 SCANNED ON DT.05.01.2011. C Nonestab
7) CAP TO DRG NO ARM 1172 A26 6221020012[62]() Specification : CAP TO DRG. NO.ARM 1172 A26 DT.24-11-79 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SQUIB ASSY (EMPTY) FOR PYRO CTG.[60]() Specification : NASK 856 (PROVISIONAL) C Nonestab
2) SET OF PYRO SQUIB OPERATOR II-253ME[60]() Specification : DRG .NO. NASK--- 1089/1 (PROV.) C Nonestab
3) SQUIB PLUG BRIDGED FOR IGNITER[60]() Specification : DRG. NO. ERDL,1164 DET. 2 C Nonestab
4) COMPONENTS FOR SQUIB PSQ 6[60]() Specification : 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG. NO. PTA-L-54-01-01-103-X C Nonestab
5) BRIDGED SQUIB[60]() Specification : DRG. NO. ERDL; 1320 DET. NO. 5. FOR SAM 5B-87 DT. 09.10.98 C Nonestab
6) SQUIB (EMPTY) FOR IGNITER EB-2[60]() Specification : DRG.NO. AFK-SK-343-06 DT.02.02.2006 C Nonestab
7) SQUIB HOLDER DRG.NO. AFK/SK-334-06][60]() Specification : DRG. NO. AFK/SK-334-06 R Nonestab
8) SQUIB HOLDER - DRG.NO. AK/SK-303-05[60]() Specification : DRG. NO. AFK/SK - 303-05 SHEET NO. 3/3 DT.27.11.2014 C Nonestab
9) SQUIB ASSEMBLY (EMPTY) TO DRG. NO ERDL 959 DET. 4 DT 14-09-76 FOR PP9 RST[64]() Specification : DRG. NO ERDL 959 DET. 4 DT 14-09-76 C Nonestab
10) MFG OF L.T SQUIB. DRG NO ERDL 563.[96]() Specification : DRG.NO.ERDL 563 DET NO. 7 DATE 9.6.89 C Nonestab
11) CHARGES FOR MISC JOB FOR LT SQUIB[96]() Specification : DRG NO.ERDL-1046 DET-2. Dt. 19.11.2009 R Nonestab
12) SQUIBS TO DRG NO.ERDL 1004 DET NO.1[99]() Specification : ERDL SPECN NO. ERDL/PYRO/PS/145 C Nonestab
13) SQUIB PLUG DET.ELEC.82 MK IN2[64]() Specification : DRG. NO. HEMRL DRG. 1443 DET. NO. 8 DT. 25.11.97 C Nonestab
14) SQUIB PLUG TO DRG. NO. ERDL DRG 897, DET NO. 7[60]() Specification : DRG. NO. ERDL DRG 897, DET NO. 7 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SQUIB HOUSING TO ARDE DRG NO 0901 00 02 01 00 001 00PB Description : SQUIB HOUSING TO ARDE DRG NO 0901 00 02 01 00 001 00PB() Specification : SQUIB HOUSING TO ARDE DRG.NO.0901 00 02 01 00 001 00PB C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PRIMER BODY WITH CONTACT MOULDED LF 9911356265[99]() Specification : BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS. C Nonestab
2) MOULDING OF PRIMER BODY and CONTACT LF 9911349627[99]() Specification : MOULDING OF PRIMER BODY TO DRG NO.NAD-1589/1/1 R.NO. NIL DT.24-7-07. CONTACT BOLT TO DRG. NO. ERDL DRG.971 DET.NO.3 DT.19-04-10 WITH GLASS FILLED PHENOLIC RESIN TO SPECN: JSS-9330-05:2012(REVISION NO-1) DC NO.5091-ME DT 21/8/2012 AS ERDLD C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6576763204 CONTAINER 67A (PLASTIC)W/O DISC[65]() Specification : SPECN.CQA(A) 2804(M) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6454000051 SQUIB PLG BRIDGED TO ERDL DRG 1096[64]() Specification : HEMRL/PYRO/PS/207(C). C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6454000050 L T AQUIB PLUG TO ERDL DRG NO 563[64]() Specification : L.T SQUIB PLUG TO ERDL DRG NO.563DETAILNO.7 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A[65]() Specification : SPECN.NO. CQA(A) 2804 C Nonestab
2) 6519000002 CONTAINER 47B (PLASTIC) FOR FZ 117[65]() Specification : AMMN CONTAINER 47B.DES.REF. CIA/AMN/2483, PT.NO.ISV-515A DC-36647-A,CONSISTING OF (1) BODY TO PT.NO.ISV 1769 2)LID PT.NO.ISV 1770 (3) RING PT.NO.ISV 1771 (4) DISC DIA 28 X 7.5 + - 0.5 THICK CAPCELL. C Nonestab
3) 6490501002 PLUG FUZE HOLE 50.8MM 2A (PLASTIC)[64]() Specification : PLUG FUZE HOLE 50.8 MM 2A (PLASTIC) C Nonestab
4) 6572129007 CONT.38B (PLASTIC)[65]() Specification : CONT.38B, CONSISTING 1.BODY 2.LID .3.RING-A. 4.DISC 5.DISC 6.SLEEVE. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6078000021 ELECTRIC BRIDGE WIRE CAP FOR FSAPDS[60]() Specification : ELECTRIC BRIDGE WIRE CAP FOR PRIMER OF 120 MM AMMUNITION TODRAWING NO. HEMRL/PYRO/H/SK.021NOTE- THE RESISTANCE OF EACH EMPTY CAP SHOULD BE 1.5 OHM+ / - 0.3 OHM I.E. FROM 1.2 OHM TO 1.8 OHM C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) PLUG A C34 DRG ARM 1172 A 16 FOR 1000 LBS L F NO 6220501010[62]() Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED) C Nonestab
2) PLUG FASTENING FOR 250 KG L F NO 6241101124[62]() Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
3) PLUG SURFACE TREATED FOR 250 KG L F NO 6240901205[62]() Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED][DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
4) PLUG MCD SURFACE TREATED 450 KG L F NO 6231101105[62]() Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED]. C Nonestab
5) PLUG FOR LUG HOUSING 250 KG L F NO 6241101114[62]() Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CONTAINER FOR PP3 DRG NO AAIW 1147 LF 9911358188[99]() Specification : CONTAINER TO DRG.NO.AAIW-1147 (8 SHEET) FOR PACKING OF CARTG.PP-3. C Nonestab
2) CONTAINER P 10B FOR CARTG PK 3 PV35 lf 9911358092[99]() Specification : CONTAINER P-10B TO DRG TRD-1175 CONSISTS OF FOLLOWING ITEMS 1)SLEEVE TO DRG NO.TRD-1177"a" 2)DISC TO DRG NO.TRD-1176 3)LABLE TO DRG NO.TRD-1359"a"4)CONTAINER NO.P-10 EMPTY ASSY.TODRG NO.TRD-1358 CONSIST:A)BODY DRG NO.TRD 1174"a" B)LID TOD C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) WASHER COPPER FOR SHELL 155MM ILLG M1A1[63]() Specification : DRG NO. 2440A03076 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) ADAPTER NOSE FOR MORTAR BOMB 81MM ILLG.2A[62]() Specification : CQA(A) 2345 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) NOSE CAP FOR 51 MM SMOKE [62]() Specification : DRG. NO. ARDE-2082 DET. NO. 7 PT. NO. ITV-215 DC(I)36288-A, SPECN.CQA(A) 2352(d) DC-36768-A DT 18-7-2001. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY FOR 51MM ILLUMINATING[62]() Specification : SPECN.CQA(A) 2328 (d) DRG.NO.ARDE - 2064 (DET-1) PT.NO.ITV 220 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SQUIB FOR SIGNAL FLARE[99]() Specification : ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PRO C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) TAIL ADAPTER FOR BOMB 51MM SMOKE[62]() Specification : DRG. NO. CQA(A)/AMN/2935, DET NO. 2 PT.NO. ITV-274 SPECN. NO. CQA(A) 2352(d) C Nonestab
2) DISC FOR BOMB 51MM PACKING[62]() Specification : DRG NO OFDR/BOMB 51MM ILLG/SMK/114 C Nonestab
3) CAP TOP CLOSING FOR HAND FLARE[64]() Specification : DRG.NO.OFDR/CT/1/12/A3 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY EMPTY FOR 51MM SMOKE[62]() Specification : DRG.NO.CQA(A)/AMN/2935,DET 1 PT.NO.ITV273 DC-36973-A DT.09/08/04 & SPEN.NO.CQA(A) 2352 (d) DC-36768 A DATED.18/07/2001 C Nonestab
2) Set of 5 Components Upper Set for 51mm Illg. [62]() Specification : ARDE-2064 C Nonestab
3) PARACHUTE HOUSING FOR 51 MM ILLG.[62]() Specification : DRG.ARDE 2064 DET NO. 24 PT NO.ITV 240 SPECN. NO. CQA(A) 2328(d) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) EMPTY COMPONENTS LOWER SET FOR BOMB 51MM ILLG. 1A[62]() Specification : CQA(A) 2328 C Nonestab
2) CUP FOR BOMB 51MM ILLG.[62]() Specification : DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) AMMUNITION CONTAINER 75A (ASSY)[65]() Specification : DRG. NO. CQA/AMN/3259 PART NO. ISV 583A C Nonestab
2) COVER EMPTY FOR FLARE TRIP WIRE MK 1/L ITEM N0.9 [64]() Specification : DRG.NO.DD(L) 13461-A/1, SHEET NO.1 SPECN NO.CQA(A)3807 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH GREEN[60]() Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER C Nonestab
2) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH ILLUMINATING[60]() Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOOSTER CUP & PIN FOR 84MM HEAT-551[99]() Specification : SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ). C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PARTITION TRD 1-2-2279 (84MM 551)[99]() Specification : PARTITION TO DRG.NO. TRD 1-2-2279 FOR 84MM HEAT-551. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) ADOPTER SCREW TO LF 9911358097[99]() Specification : ADOPTER SCREW TO DRG.NO.MMG-H/MK-1/051/RO. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PYRO DELAY TUBE EMPTY LF 9911358384[99]() Specification : PYRO DELAY TUBE EMPTY TO DRG.NO.Khs-2-2-0406(a) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CONTAINER PLASTIC NO.P-17 FOR PPLT[99]() Specification : CONTAINER NO P-17 (EMPTY ASSY) TO DRG NO. TRD-2-1-2079 ONE CONTAINER WITH FOLLOWING ITEMS:-1.DISC TOP & BOTTOM SIZE 74MM X 10MM THICK EXPENDED POLYTHE- NE FOAM TO DENSITY 25 TO 30 Kg PER METER SQUARE - 02 NO.2.DISC SIZE 74MM X 0.08MM THIC C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CONTAINER PLASTIC P 17D 23MM PPL LF 9911356890[99]() Specification : PLASTIC CONTAINER P-17D (EMPTY ASSY) DRG NO. TRD-1676 b WITHONE NO EACH OF THE FOLLOWING PACKING FITMENTS:-(a) THERMOCOL DISC BOTTOM TO DRG NO KhFQ-110639 (b) THERMOCOL DISC TOP TO DRG NO KhFQ-110640 (c) POLYTHENE SLEEVE TO DRG NO. KhFQ-1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SET OF 3 SECONDAY COMPT IS-412,413,[99]() Specification : SECONDARY COMBUSTIBLE CARTG CASE SET OF 3 COMPONENTS:-1)COM-BUSTIBLE SLEEVE FOR FRONT CARTG TO DRG PT NO ISX-412, DC NO-36698-A DT 14/8/2K (2)COMBUSTIBLE CAP FOR FRONT CARTG TO DRGPT.NO.ISX-413 DC 36698-A DT 14/8/2K (3)COMBUSTIBLE BODY FO C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CAP AND BOTTOM SPECN F1301-905060-P[99]() Specification : CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLUG FIRING REPRESENTING FUZE YDB-60 TO DRG. NO. NAI(P)SKETCH 360[60]() Specification : NAI(P) SKETCH 360 DATED 22/11/2012 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CASE CARTG OF 25 PR MK 2/1/L BRASS TO DRG NO DD(L) 6557 E PART NO. RW-32[60]() Specification : DRG NO DD(L) 6557 E PART NO. RW-32 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ALLIED CONNECTOR - SOCKET.[60]() Specification : ALLIED CONNECTOR - SOCKET NO 3106 F - 10 SL-4 S WITH DUST - PROOF COVER WITH SHORTING PLUG (DRG.NO.NASK 760/2 SHT. 1) DT. 07.10.13 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SLEEVE AS PER DRG. NO. ERDL 1320[60]() Specification : DRG. NO. ERDL 1320 (Conf. by user on IBS) DET. NO. 4 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) HOUSING (EMPTY) FOR IGNITER EB-2[60]() Specification : DRG.NO. AFK/SK-347-06 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) H.CUP REF CIA/AMN/2158 PT ISV 1740[60]() Specification : DESIGNER'S REF. NO. CIA/AMN/2158 PT. NO.ISV 1740 C Nonestab
2) CUP HALF DRG. ARDE/2225 DET.8[60]() Specification : DRG.NO. ARDE/2225 DET.NO.8 DT.30.05.2008 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) MEDIUM RANGE CHAFF ROCKET (MRCR)[93]() Specification : DRG.NO.NASK 762 SHEET 1 OF 2 SHTS (PROV)DT.20.4.2015 . C Nonestab
2) 105MM LONG RANGE CHAFF ROCKETS (LRCR)[93]() Specification : DRG.NO.NASK 760 SHEET 1 OF 2 SHTS. (PROV) DT.20.04.2015. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CUPS TO DRG NO ARDE 2043 DET NO 5[60]() Specification : CQA(A) 2804 R Nonestab
2) CUP TO ERDL DRG 1005 DET NO.2 MRECM[99]() Specification : DRG.NO.ERDL DRG.1005 DET NO 2 DT.19.11.2009 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) INNER CASE DRG 04-44-79000-06103-3E[99]() Specification : DRG. NO. 04-44-79000-06103-3E C Nonestab
2) CARTG.CASE DRG ARDE/2165/2 ERU 204[60]() Specification : SPECN.ARDE/SPECN/423 C Nonestab
3) CSE FOR H4HA SEAT OF HJT16 A/C[60]() Specification : 1) CSE PRI. DRG. ARDE: 1460/1 CASE,WASHER & DISC, RING SEALING, DISC 2) CSE SEC. ARDE:1765/1 CUP & SUPPORT, COVER & DISC, RING SEALING 3) CSE DROGUE DRG. ARDE 1657/1-CASE,DISC, WASHER C Nonestab
4) SLEEVE W/O SERRATION FOR 40MM MGL[60]() Specification : DRG. NO. AFK/SK-214/05. DT. 27.01.2015 C Nonestab
5) COMPONENTS FOR CARTG. 40MM MGL AMN[60]() Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ADAPTER NOSE MOR BOMB NO.1 MK 1[60]() Specification : CQA(A) 2351 C Nonestab
2) SLUG FOR 14.5MM CASE AFK/PJ/SK-56[60]() Specification : AFK, DRG NO.AFK/PJ/SK-56 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ANTISTATIC PLASTIC BOX POLY PROPYLENE COPOLYMER PPCP WITH ANTISTATIC GRAIN FOR PACKING OF CARTRIDGE S A 9 MM BALL[65]() Specification : DRAWING NO AFK/PROV-51 DTD.12.10.2016 & 15.05.2017 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CONTAINER 38 B WITH SLEEVE A & B &[65]() Specification : DESGN REF NO. CIA/AMN/2008 C Nonestab
2) CONTAINER NO.P-14 TO HOLD CARTGS[60]() Specification : CQA(A) 2804 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) GRID DRG.NO. ARDE/150S PK16[60]() Specification : SPECN-ARDE/SPECN/221 C Nonestab
2) SET OF 13 COMPONENTS FOR SUB ASSEMBLY FOR PYROJACK DRG NO. PTA-L-52-01-01-001-X[99]() Specification : DRG NO. PTA-L-52-01-01-001-X DT. 08-05-2001 13 COMPONENTS AS PER LIST ENCLOSED C Nonestab
3) BODY TO DRG.ARDE 2078/30 DT.27/8/87[99]() Specification : ARDE/SPECN/415 (b) dt. 20.10.93 PARA 1 TO 20. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SET OF HEAD TO DRG. NO. ARM 1138 A3, DT. 19-03-1996 TO MATCH WITH DETONATOR PLUG TO DRG. NO. ARM/1138 A2, DT. 19-03-1996 FOR DET. 56[60]() Specification : DRG. NO. ARM 1138 A3, DT. 19-03-1996 C Nonestab
2) SET OF HEAD TO DRG. NO. ARM/1225 A-3, DT. 18-11-2005 TO MATCH WITH DETONATOR PLUG TO DRG. NO. ARM/1225 A-4, DT. 18-11-2005 FOR DET. NO. 28[60]() Specification : DRG. NO. ARM/1225 A-3, DT. 18-11-2005 C Nonestab
3) SET OF HEAD TO DRG. NO. ARM-1109-A4, DT. 19-02-1999 TO MATCH WITH DETONATOR PLUG TO DRG. NO. ARM/1109 A2, DT. 19-03-1996 FOR DET. 52[60]() Specification : DRG. NO. ARM-1109-A4 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PL.CONTAINER WITH SLEEVES FOR CCJC[60]() Specification : AS PER CQA(A) SPECN. C Nonestab
2) AMMN CONTAINER 69 A/L PLASTIC ARDE[65]() Specification : CQA(A)2804 C Nonestab
3) CONTAINER TO DRG.NO. ARDE 2056[65]() Specification : DRG.NO ARDE 2025 DETAIL NO 1 C Nonestab
4) AMN.CONT. 67A,BOTTOM & TOPSLEEVE MR[60]() Specification : DRG.NO ARDE 2065 DET. 5 PART NO. ISV 521 A C Nonestab
5) CONTAINER NO. P-17,ARDE 1910 DET 1TO5 ERU204[65]() Specification : DRG NO ARDE 1910 DET. NO.1 & DET. NO. 5 C Nonestab
6) CONTAINER TO ARDE-1933 DET-4 ITV 170[60]() Specification : CQA (A) 2322 C Nonestab
7) AMMUNITION CONTAINER 47 B, DES. REF CIA/AMN/2483, PT. NO. ISV 515 A SPECN. NO CQA(A) 2804[65]() Specification : CQA(A) 2804 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) AMMUNITION CONTAINER 75A (ASSLY) [65]() Specification : DRG. NO. CQA/AMN/3259 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CONTAINER 63 A[65]() Specification : SPECN. NO. CQA(A) 2805 (H) DC-36145-A [DRG. NO. CIA/AMN/2174 PART NO. ISV 506A DC 36166-A] C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) WASHER COPPER FOR SHELL 155MM ILLG M1A1[63]() Specification : DRG NO. 2440A03076 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) WASHER COPPER FOR 105 MM ILLG.[62]() Specification : DRG.NO. D 6 P-A-180/1/3,PT NO.ISX 344 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BOMB BODY (EMPTY)FOR 120MM ILLG.[63]() Specification : SPECN. NO. CQA (A) 2321 (b) DC-36952-A dt.16.03.2004 DRG NO. ARDE 2011 PT. NO. ITV - 12 SA DC (I) 33903 - A C Nonestab
2) BODY EMPTY FOR 51MM SMOKE[62]() Specification : DRG.NO.CQA(A)/AMN/2935,DET 1 PT.NO.ITV273 DC-36973-A DT.09/08/04 & SPEN.NO.CQA(A) 2352 (d) DC-36768 A DATED.18/07/2001 C Nonestab
3) SET OF 5 COMPONENTS UPPER SET OF 51MM ILLG. CONSISTING OF (I) BASE PLATE (II) COLLAR (III) EYE BOLT [62]() Specification : DRG. NO. ARDE-2064 C Nonestab
4) SET OF COMPONENTS FOR SIGNAL DISTRESS DAY & NIGHT 1 MK IN 1[64]() Specification : DRG.NOS.NAD - 8611/38, 40, 37, 39, 27, 29, 2 AND 36 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) A SET OF LID, BOOSTER TUBE, CASE RING[62]() Specification : (1) LID TO DRG. NO. ARDE 2024/26 AMDT. NO. AL NO. 671 DT. 29-5-91 (2) BOOSTER TUBE TO DRG. NO. ARDE/2024/21 AMDT. NO. AL NO. 616 DT 4-10-88 (3) CASE AND RING ASSY TO DRG. NO. ARDE 2024/18 AMDT. R.NO. 1 DATED 25-8-86. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SET OF 9 COMPONENTS FOR FLARE TRIP WIRE[64]() Specification : CIA 3807 C Nonestab
2) SQUIB FOR SIGNAL FLARE [99]() Specification : ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PRO C Nonestab
3) WASHER COPPER FOR 105 MM ILLG.[62]() Specification : DRG.NO. D 6 P-A-180/1/3,PT NO.ISX 344 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) A SET OF LID, BOOSTER TUBE, CASE RING[62]() Specification : (1) LID TO DRG. NO. ARDE 2024/26 AMDT. NO. AL NO. 671 DT. 29-5-91 (2) BOOSTER TUBE TO DRG. NO. ARDE/2024/21 AMDT. NO. AL NO. 616 DT 4-10-88 (3) CASE AND RING ASSY TO DRG. NO. ARDE 2024/18 AMDT. R.NO. 1 DATED 25-8-86. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SQUIB FOR SIGNAL FLARE[99]() Specification : ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PRO C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SET OF COMPONENTS FOR SHELL 105 MM IFG ILLG 2A COMPRISING OF 9 COMPONENTS/ ASSEMBLES [62]() Specification : CQA(A) 4928 C Nonestab
2) SET OF 5 COMPONENTS UPPER SET OF 51MM ILLG. CONSISTING OF (I) BASE PLATE (II) COLLAR (III) EYE BOLT [62]() Specification : DRG. NO. ARDE-2064 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PL.CONTAINER WITH SLEEVES FOR CCJC[60]() Specification : AS PER CQA(A) SPECN. C Nonestab
2) AMMN CONTAINER 69 A/L PLASTIC ARDE[65]() Specification : CQA(A)2804 C Nonestab
3) CONTAINER TO DRG.NO. ARDE 2056[65]() Specification : DRG.NO ARDE 2025 DETAIL NO 1 C Nonestab
4) AMN.CONT. 67A,BOTTOM & TOPSLEEVE MR[60]() Specification : DRG.NO ARDE 2065 DET. 5 PART NO. ISV 521 A C Nonestab
5) CONTAINER NO. P-17,ARDE 1910 DET 1TO5 ERU204[65]() Specification : DRG NO ARDE 1910 DET. NO.1 & DET. NO. 5 C Nonestab
6) CONTAINER TO ARDE-1933 DET-4 ITV 170[60]() Specification : CQA (A) 2322 C Nonestab
7) AMMUNITION CONTAINER 47 B, DES. REF CIA/AMN/2483, PT. NO. ISV 515 A SPECN. NO CQA(A) 2804[65]() Specification : CQA(A) 2804 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) 1)CONTAINER 2) LID 3)DISC[60]() Specification : DRG. NO. NAI(V) 8216/1 QTY. 1 NO.DT. 30.05.2008 2) LID DRG. NO. NAI (V) 8216/2 PROV. QTY 1 NO DT.30.05.2008 3) DISC DRG. NO. NAI(V) 8216/3 PROV.QTY.2 NO. DT. 30.05.2008 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) AMMN CONTAINER 69 A/L PLASTIC ARDE[65]() Specification : CQA(A)2804 C Nonestab
2) AMN.CONT. 67A,BOTTOM & TOPSLEEVE MR[60]() Specification : DRG.NO ARDE 2065 DET. 5 PART NO. ISV 521 A C Nonestab
3) CONTAINER TO ARDE-1933 DET-4 ITV 170[60]() Specification : CQA (A) 2322 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) 1)CONTAINER 2) LID 3)DISC[60]() Specification : DRG. NO. NAI(V) 8216/1 QTY. 1 NO.DT. 30.05.2008 2) LID DRG. NO. NAI (V) 8216/2 PROV. QTY 1 NO DT.30.05.2008 3) DISC DRG. NO. NAI(V) 8216/3 PROV.QTY.2 NO. DT. 30.05.2008 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) INNER CASE DRG 04-44-79000-06103-3E[99]() Specification : DRG. NO. 04-44-79000-06103-3E C Nonestab
2) CARTG.CASE DRG ARDE/2165/2 ERU 204[60]() Specification : SPECN.ARDE/SPECN/423 C Nonestab
3) CUP FOR IGNITER EB-2[60]() Specification : DRG NO. AFK/SK-341-06 DT.02.02.2006 C Nonestab
4) CASE CRTG ARDE/1508 PK16[60]() Specification : SPECN : ARDE/ SPECN/221 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) HOUSING (EMPTY) FOR IGNITER EB-2[60]() Specification : DRG.NO. AFK/SK-347-06 C Nonestab
2) BOOSTER CARTG ASSY EMPTY[60]() Specification : DRG.NO. AFK/SK-014-03 DT.27.12.12 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SET OF COMPONENTS FOR CAP ELECTRIC BRIDGE 6099999090[60]() Specification : HEMRL/SPECN/346A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SET OF COMPONENTS FOR CAP ELECTRIC BRIDGE 6099999090[60]() Specification : HEMRL/SPECN/346A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CCJ CLAM EMPTY ASSEMBLY SET CONSISTING OF 06 COMPONENTS[60]() Specification : AS PER SPECN. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SIMULATED SQUIB PLUG BRIDGED[61]() Specification : SQUIB PLUG (BRIDGED) ERDL DRG. NO. 1296 DET.1 DT. 10-5-93 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SQUIB HOLDER DRG NO NAI P SK 299[60]() Specification : SQUIB HOLDER DRG NO NAI (P) SK 299/26 DT. 06.02.2018 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SET OF CONTAINER P11 TO DRG NO ARDE 1802[60]() Specification : DRG. NO. ARDE 1802 (1NO) , WASHERS TO DRG. NO. ARDE (I) 2210 DET 1 (5 NOS) & (II) 1889 DET 6 ( 6 NOS.) & SLEEVE TO DRG. NO. ARDE 2210 DET 2 (1NO.) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SET OF CONTAINER P11 TO DRG NO ARDE 1802[60]() Specification : DRG. NO. ARDE 1802 (1NO) , WASHERS TO DRG. NO. ARDE (I) 2210 DET 1 (5 NOS) & (II) 1889 DET 6 ( 6 NOS.) & SLEEVE TO DRG. NO. ARDE 2210 DET 2 (1NO.) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CARTG SEAT EJECTION GUILLOTINE NO 1[60]() Specification : DRG. NO. 04020001010000000PA. R Nonestab
2) CCJ PRIMARY BREECH EMPTY ASSY[60]() Specification : DRG. NO. ARDE 2193 DET. NO.1 FOR JAGUAR A/C R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ANTISTATIC PLASTIC BOX POLY PROPYLENE COPOLYMER PPCP WITH ANTISTATIC GRAIN FOR PACKING OF CARTRIDGE S A 9 MM BALL[65]() Specification : DRAWING NO AFK/PROV-51 DTD.12.10.2016 & 15.05.2017 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) GRID DRG.NO. ARDE/150S PK16[60]() Specification : SPECN-ARDE/SPECN/221 C Nonestab
2) END PIN ASSEMBLY FOR MRCR ROCKET[60]() Specification : DRG. NO.NAI (P) SK-123 (PROV.) DT. 22.01.2008 C Nonestab
3) CONNECTING SLEEVE MRCR ROCKET[60]() Specification : DRG. NO. NAI (P) SK - 125 (PROV,)DATED 04.03.2010 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda

[Deemed Registration]
Name Specification Use Status
1) 6191700144 SQUIB PLUG BRIDGED SLEEVE ASSEMBLY EMPTY DRG NO HEMRL EED H 130 Description : 6191700144 SQUIB PLUG BRIDGED SLEEVE ASSEMBLY EMPTY DRG NO HEMRL EED H 130() Specification : SQUIB PLUG BRIDGED SLEEVE ASSEMBLY EMPTY DRG NO HEMRL EED H 130 C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SET OF14 ITEMS WITH PERFORATED DISC LF 9911356669[99]() Specification : SET OF 14 COMPONENTS ( 81 MM SMOKE GRENADE EMPTY COMPONENTS)WITH DISC PERFORATED & DELAY ELEMENT(DETAILS AS PER ENCLOSEDLIST.)LOT SIZE - 2050 SET C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CARTG CASE FOR 23MM SCHILKA HEI/T[99]() Specification : CARTG CASE EMPTY TO DRG NO.6018-10-00-01 (7 SHEET)SHEET NO.1DC-36909-A DT.5-7-03 AND SHEET NO.2 DC NO.33817-A DT.10-9-85SHEET NO.3 DC NO.37073-A DT.29-9-06 AND SHEET NO.4 T0 SHEETNO.6 DC NO.33817-A DT.10-9-85 AND SHEET NO.7 DC NO.35587-AD C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PRIMER BODY WITH CONTACT MOULDED LF 9911356265[99]() Specification : BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS. C Nonestab
2) MOULDING OF PRIMER BODY and CONTACT LF 9911349627[99]() Specification : MOULDING OF PRIMER BODY TO DRG NO.NAD-1589/1/1 R.NO. NIL DT.24-7-07. CONTACT BOLT TO DRG. NO. ERDL DRG.971 DET.NO.3 DT.19-04-10 WITH GLASS FILLED PHENOLIC RESIN TO SPECN: JSS-9330-05:2012(REVISION NO-1) DC NO.5091-ME DT 21/8/2012 AS ERDLD R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Closing Cup Part No 6413187 For 84 mm smoke 469C LF 9911358443 Description : Closing Cup Part No 6413187 For 84 mm smoke 469C LF 9911358443() Specification : OEM DRG No 301177898 / TRD DRG No 2 2 2738 R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY FOR HAND FLARE RED[64]() Specification : DRG. NO. OFDR/CT/1/3/M1/A3 LATEST AMENDMENT NO.93 DT. 18/8/98. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CAP CHAMBER FOR HAND FLARE[64]() Specification : DRG.NO.OFDR/CT/1/9/M1/A3 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CABLE HOUSING FOR 120MM ILLG. [63]() Specification : DRG NO. ARDE2011, DET 17 PT NO.ITV - 147 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) RUBBER PLUG FOR SIGNAL FLARE[99]() Specification : DRG.NO.NASK 864/8 (PROV) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) DELAY HOLDER FOR SHELL 155 MM ILLG.M1A1[63]() Specification : DRG. NO. 2440A03062 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) DELAY TUBE FOR 51MM ILLG[62]() Specification : DRG. ARDE 2064 (DET. 37) PART NO IQX 898 SPECN.CQA (A) 2328 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY FOR 51MM ILLUMINATING[62]() Specification : SPECN.CQA(A) 2328 (d) DRG.NO.ARDE - 2064 (DET-1) PT.NO.ITV 220 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CONTAINER WITH BASE & LID BUOYANT[62]() Specification : DRG NO. OFDR/CT/1/M1/A3 AMDT DC 103 DT 5-3-99 AND LID FOR CONTAINER TO DRG.NO.OFDR/CT/5/M1/A3 TO SPECN.NO. DGOF/OFDR/008. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CONTAINER 63 A[65]() Specification : SPECN. NO. CQA(A) 2805 (H) DC-36145-A [DRG. NO. CIA/AMN/2174 PART NO. ISV 506A DC 36166-A] C Nonestab
2) CUP MOULDED WITH PINS & LID PINAKA[61]() Specification : DRG NO.HEMRL/IGN/PINAKA/DRG 006 DET.NO.4,5,6 & 16. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) DELAY HOLDER FOR 120MM ILLG.[63]() Specification : SPECN. NO. CQA(A) 2321 (b) DRG. NO. ARDE 2011 DET 11 PT NO. ITV 153 C Nonestab
2) SIGNAL FLARE (ASSY) FOR INDIAN NAVY[99]() Specification : DRG.NO.NASK 864/1(PROV)CONSISTING OF1.UPPER BODY TO DRG.NO.NASK 864/1/2(PROV)2.LOWER BODY WITHFINS TO DRG.NO.NASK 864/1/3(PROV)3.PROPELLANT TUBE TO DRG.NONASK 864/7/1(PROV)4.NOSE CAP TO DRG.NO.NASK 864/1/1(PROV)5.STEEL WASHER TO DRG.NO.NA C Nonestab
3) SQUIB FOR SIGNAL FLARE [99]() Specification : ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PRO C Nonestab
4) TORPEDO IGNITION CARTG.(EMPTY) [64]() Specification : (I) CONTAINER TODRG.NO.NAD 19502/2/1 (II) RING TO DRG NO.NAD 19502/3/3(III) CARTG CASE TO DRG NO.NAD 19502/1. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CASE CARTG. FOR 16MM RED[60]() Specification : CQA(A) 3811 Drg. No. ARDE1878 DET 1 IQW-151 C Nonestab
2) BODY LOWER FOR 81MM ILLG. MK-II[62]() Specification : DRG NO ARDE 2222 DET 3 PT NO ITV 255DC-36852A DT. 23/09/2002 SPECN. NO. CQA(A) 2345(C) DC-36513A DATED 25.1.99. C Nonestab
3) BODY UPPER FOR 81 MM ILLG. MK-II [62]() Specification : DRG. NO. ARDE 2222 DET 2 PT NO ITV 254 SPECN : CQA(A) 2345 (C) C Nonestab
4) CASE CARTRIDGE FOR 16 MM GREEN [60]() Specification : SPECN.NO.CQA (A) 3811 (h) DRG.NO.ARDE 1878 DET 1 PT.NO.IQW-151 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CUP MOULDED WITH PINS & LID PINAKA[61]() Specification : DRG NO.HEMRL/IGN/PINAKA/DRG 006 DET.NO.4,5,6 & 16. C Nonestab
2) SIGNAL FLARE (ASSY) FOR INDIAN NAVY[99]() Specification : DRG.NO.NASK 864/1(PROV)CONSISTING OF1.UPPER BODY TO DRG.NO.NASK 864/1/2(PROV)2.LOWER BODY WITHFINS TO DRG.NO.NASK 864/1/3(PROV)3.PROPELLANT TUBE TO DRG.NONASK 864/7/1(PROV)4.NOSE CAP TO DRG.NO.NASK 864/1/1(PROV)5.STEEL WASHER TO DRG.NO.NA C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) AMMUNITION CONTAINER 75A (ASSY)[65]() Specification : DRG. NO. CQA/AMN/3259 PART NO. ISV 583A C Nonestab
2) COVER EMPTY FOR FLARE TRIP WIRE MK 1/L ITEM N0.9 [64]() Specification : DRG.NO.DD(L) 13461-A/1, SHEET NO.1 SPECN NO.CQA(A)3807 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY UPPER FLASH 2A TO DRG NO ARDE 2285 DET NO 1 PART NO ITV 276 DC 36057A DT 28 121995 AND BODY LOWER FLASH 2A TO DRG NO ARDE DET NO 2 PART NO ITV277 DC 36550A DT 13041999[62]() Specification : DC-36057A DT 28.12.1995 DC -36550A DT 13.04.1999 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6141156250 TUBE DELAY(4 SECOND) PT.DRG.IQX 943[61]() Specification : TUBE DELAY (FOR 4 SECONDS) DRG.PT.NO. IQX-943,DC-37296-A DT.27.12.2011 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330604970 PLUG REPRESENTING FUZE B429[63]() Specification : PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1410052010 CUP AND CAP FOR FUZE B429E[14]() Specification : CUP & CAP FOR MAGAZINE TO DRG. NO. PROP/SK-443 FOR RECTIFICATION OF FUZE B-429E. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6454000052 SQUIB HOUSING EMPTY TO ERDL DRG1295[64]() Specification : HEMRL/PYRO/PS/207(C) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6501009215 SLEEVE PART 2-17 DET DEVICE FZ. B15[65]() Specification : SLEEVE, PART NO. 2-17 DRG.NO.3-024045, 3B15, DC 36767-A, MATL: TYPE NYLON-66 TO SPECN. DEF STAN 93-8/1 (LATEST ISSUE) WITH ELECTRICAL PROPERTIES & IMPACT STRENGTH AS PER GOST.10589-73 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6141156252 HOUSING WITH PIN PT.DRG.NO.IQX85 SA[61]() Specification : HOUSING WITH PIN C Nonestab
2) 6431826719 CUP & BASE DETONATOR HOLDER 560 MG[64]() Specification : CUP DETONATOR HOLDER & BASE DETONATOR HOLDER FOR DET. 560 MG FOR MINE APERS M-14. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432800004 COPPER CUP TORPEDO I C[64]() Specification : CUP (MATERIAL- COPPER SHEET) TO DRG. NO. NASK 754/4 (PROV.) FOR ASSEMBLY OF CARTG. TORPEDO IMPULSE. C Nonestab
2) 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB[62]() Specification : GRUMMET ASSEMBLY TO DES. REF.NO. 04-13-2452-148,DC 36940-A DT.29/12/2003,CONSISTING OF : (A) GRUMMET 155 MM (B) SPLIT PIN ASSEMBLY (C) RING FOR SHELL 155 MM HE ERFB (BT & BB) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6121000192 CUP TO PART NO. 2-10 FOR 125MM HEAT[61]() Specification : CUP TO PART NO. 2-10 FOR 125MM HEAT C Nonestab
2) 6121000194 CAP PT.NO.2-4 & SMALL CUP PT.NO.2-5[61]() Specification : CAP PT.NO.2-4 & SMALL CUP PT.NO.2-5 C Nonestab
3) 6330604400 HOLDER DELAY FOR FZ B429[63]() Specification : DELAY HOLDER TO DRG. NO. 3-016919,53-B-025Y, DET.NO.40 DC-37284-A FOR FUZE B-429 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330604500 SLEEVE REGULATOR PT 42[63]() Specification : REGULATOR SLEEVE TO DRG. NO. 3-016919, 53-B-025Y,DET.NO.42, DC 34858-A FOR FUZE B-429. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330600190 RING SEALING DRG.3-016919 DET-52[63]() Specification : SPECN.JSS 4720-02 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0101012130 SEAL TO DRG NO. 6390 155 RE 1[01]() Specification : SPECN NO. IS-5872-1990 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6121000193 COVER TO PT.NO. 2-11 FOR 125MM HEAT[61]() Specification : COVER TO PT.NO. 2-11 FOR 125MM HEAT R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6410900220 LENS PART DRG. 065/4 FOR 125MM HEAT[64]() Specification : SPECN. NO. JSS 9330-05 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6191700029 VT HOLDER MOD FOR PINAKA RKT[61]() Specification : VT HOLDER MODIFIED FOR PINAKA ROCKET SYSTEM TO ARDE DRAWING NO. 8603 03 99 00 02 001 00DA C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6572129006 CONTAINER 38 B WITHOUT FITMENTS[65]() Specification : CQA(A) 2804(M) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6473200464 LINER EXPLODER CAVITY DRG.155-1070[64]() Specification : LINER,EXPLODER CAVITY TO CQA(A) DESIGNER'S REF. 155-1070 DC NO. 36792-A DT. 01/11/2001 I.E. ALUMINIUM LINER HAVING LENGTH 33.7 - 0.5 MM AS DIRECTED BY CQA(A)PUNE VIDE LETTER NO.QA3A332 DTD.02/12/2013 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6338501100 LINER FOR RIGID CUTTING CHARGE 85 MM[63]() Specification : LINER FOR CUTTING CHARGE 85 MM TO DRG NO. HE/CAST/043 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008 C Nonestab
2) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]() Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331451300 DETONATOR HOLDER TO DRG NO HE CAST 022 DET 5 QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008 FOR SHAPED CHARGE145 MM[63]() Specification : DETONATOR HOLDER TO DRG.NO. HE/CAST 022 DET.5 & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008, FOR SHAPED CHARGE145 MM. C Nonestab
2) 6191700215 CAP CLOSING ASSEMBLY FOR GUIDED PINAKA ROCKET TO ARDE DRG NO 1702 01 01 00 02 000 00DA[61]() Specification : ARDE DRG NO 1702 01 01 00 02 000 00DA R Nonestab
3) 6191700144 SQUIB PLUG BRIDGED SLEEVE ASSEMBLY EMPTY DRG NO HEMRL EED H 130[61]() Specification : SQUIB PLUG BRIDGED SLEEVE ASSEMBLY EMPTY DRG NO HEMRL EED H 130 C Nonestab
4) 6581233026 END CAP FOR CONTAINER 40A TO DRG PT NO ISV 1123 SHEET STRIP TO SPECN NO IS 1079 2017 OR IS 513 2008 OR BS 1449 PT 381968 CS4 OR BS 1449 PT 3A 1964 HS4A[65]() Specification : END CAP FOR CONTAINER 40A TO DRG.PT.NO.ISV 1123 SHEET/STRIP TO SPECN. NO.IS 1079:2017 OR IS 513:2008 OR BS 1449 PT 381968-CS4 OR BS 1449 PT 3A-1964-HS4A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330685102 ELECTRIC FUZE UNCHARGED EMPTY[63]() Specification : ELECTRIC FUZE UNCHARGED ( EMPTY) TO DRG NO. 3-027321 CD 8 C Nonestab
2) 6356000016 CONTAINER CLEARING CHARGE EMPTY ASSY TO DRAWING NO ARDE9707 00 01 01 17 000 00TA FOR INFLUENCE MINE MK II FILLING AND ASSEMBLY[63]() Specification : CONTAINER CLEARING CHARGE (EMPTY ASSY.) TO DRAWING NO. ARDE9707 00 01 01 17 000 00TA FOR INFLUENCE MINE MK-II - FILLINGAND ASSEMBLY. C Nonestab
3) 6454000058 SQUIB PLUG BRIDGED EMPTY FOR CONTAINER CLEANING CHARGE TODRAWING NO ARDE 9707 00 01 1718 000 00TA FOR INFLUENCE MINEMK II FILLING AND ASSEMBLY[64]() Specification : SQUIB PLUG (BRIDGED)(EMPTY) FOR CONTAINER CLEANING CHARGE TODRAWING NO.ARDE 9707 00 01 1718 000 00TA FOR INFLUENCE MINEMK-II-FILLING AND ASSEMBLY. C Nonestab
4) 6356000102 FUZE FOR ADRUSHY MINE MK II ASSY[63]() Specification : FUZE FOR ADRUSHY MINE MK II (ASSY) TO ARDE DRG NO 9707 00 0200 00 000 00TB AND AS PER SCOPE OF WORK C Nonestab
5) 6331431101 BOTTOM AND TOP PACKING SHEET TO SPECN HEMRL DRG HE CAST 086DET 02 CHARGE HOLDING TRAY[63]() Specification : BOTTOM & TOP PACKING SHEET TO SPECN. HEMRL DRG HE/CAST 086DET-02, CHARGE HOLDING TRAY(SUB ASSLY) TO SPECN HEMRL DRG HE/CAST 086 DET-03 SADDLE HOLDING TRAY TO SPECN.HEMRL DRG.HE/CAST 086 DET-09 MATL:ALL ABOVE ITEMS IS MADE BY EXPANDEDLINKE C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CARTG EOFE 3 PIN NO.1 MK3 DET-1[99]() Specification : 3-PIN NO-1 MK-3 CARTG. ELECTRIC OPERATING FIRE EXTINGUSHER (EMPTY ASSEMBLY) TO DRG NO.TRD-3-2-1877 AND SPECN.NO.ARDE/SPECN/264. C Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CARTG EOFE 3 PIN NO.3 MK3 EMPTY[99]() Specification : CARTG. ELECTRIC OPERATING FIRE EXTINGUISHER 3 PIN NO.3 MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-2-1881 AND SPECN.NO. ARDE/SPECN/290. C Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CARTG EOFE 2 PIN NO.1 MK-3[99]() Specification : CARTG.ELECTRIC OPERATING FIRE EXTENGUISHER 2PIN NO.1MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-1-2135.AND SPECN.NO. ARDE/SPCEN/124.FOR AIR FORCE WITH ECCENTIRICITY 0.55MM (INCLUSIVE EMPTY & FILLED PROOF). C Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) CARTG EOFE 2 PIN NO 3 MK 3 EMPTY ASSY LF 9911350439 Description : CARTG EOFE 2 PIN NO 3 MK 3 EMPTY ASSY LF 9911350439() Specification : CARTG EOFE.2 PIN NO.3 MK-3 (EMPTY ASSY.) TO DRG.NO.TRD- 3-2-1879a AND SPECN.NO. ARDE/SPECN/229. R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6078000021 ELECTRIC BRIDGE WIRE CAP FOR FSAPDS Description : 6078000021 ELECTRIC BRIDGE WIRE CAP FOR FSAPDS() Specification : ELECTRIC BRIDGE WIRE CAP FOR PRIMER OF 120 MM AMMUNITION TODRAWING NO. HEMRL/PYRO/H/SK.021NOTE- THE RESISTANCE OF EACH EMPTY CAP SHOULD BE 1.5 OHM+ / - 0.3 OHM I.E. FROM 1.2 OHM TO 1.8 OHM C Estab
Category : ddp
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SQUIB PLUG BRIDGED FOR IGNITER() Specification : DRG. NO. ERDL,1164 DET. 2 R Estab
2) COMPONENTS FOR PYRO CTG YDP 4-2() Specification : DRG. NO. NASK 1016 ( PROVISIONAL ) R Estab
3) BODY AND CUP() Specification : 1) BODY (IGNITER FOR FOREMOTOR) DRG.NO.NAI(V) 8014/1 (PROV) DT. 26/08/09 - 1 NO. 2) CUP (IGNITER FOR FOREMOTOR) DRG. NO.NAI(V) 8014/2 ( PROV) DT. 4/9/01 - 1 NO. R Estab
4) SQUIB ASSY (EMPTY) FOR PYRO CTG.() Specification : NASK 856 (PROVISIONAL) R Estab
5) MFG OF L.T SQUIB. DRG NO ERDL 563.() Specification : DRG.NO.ERDL 563 DET NO. 7 DATE 9.6.89 R Estab
6) BODY SQUIB ASSY CLOSING DISC() Specification : BODY DRG. NO. AFK/SK-223-05 QTY. 1 NO. DT. 19-10-11 2) SQUIB ASSY. DRG. NO. AFK/SK-224-05 QTY. 1 NO. DT. 19-10-11 3) CLOSING DISC DRG.NO. AFK/SK- 227-05 QTY. 1 NO. DT. 10-09-12 R Estab
7) SQUIB (EMPTY) FOR IGNITER EB-2() Specification : DRG.NO. AFK-SK-343-06 DT.02.02.2006 R Estab
8) SET OF COMPONENTS FOR MRP DETONATOR() Specification : 1) SQULB PLUG BRIDGED - NASK 1056/4 (PROVISIONAL)DT.4.2.2009 2) SLEEVE - NASK 1056/2 (PROVISIONAL)DT. 4.2.2009 3) PROTECTIVE CAP & PIN FOR DET.NAI(P) 501 (PROV) & 502 (PROV) DT.18-09-2014 R Estab
9) CONTAINER TO DRG NO ARDE 2056() Specification : DRG.NO ARDE 2025 DETAIL NO 1 R Estab
10) CONTAINER NO. P-17,ARDE 1910 DET 1TO5 ERU204() Specification : DRG NO ARDE 1910 DET. NO.1 & DET. NO. 5 R Estab
Category : p
Grade : 3
Size : S
3522 Spinmet Engineers Pvt Ltd
NO 6, RAGHAVA ENCLAVE 2 TRANSPORT ROAD SECUNDERABAD Telangana
PIN1 : 500009
Phone No. : 27814215
GSTIN : 36AABCG5203B1ZB 		HYDS05117A

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330901300 LINER FOR SHAPED CHARGE 90 MM TO DRG NO HE CAST 018 DET 3 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]() Specification : LINER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET 3& QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) LINER FOR HOLLOW CHARGE[60]() Specification : DRG. NO. AFK/SK- 212-05 C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6330301200 LINER FOR SHAPED CHARGES 30 MM Description : 6330301200 LINER FOR SHAPED CHARGES 30 MM() Specification : LINER TO DRG.NO. HE/CAST/012 DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008. E Estab
2) 6331451200 LINER FOR SHAPED CHARGES 145 MM E Description : 6331451200 LINER FOR SHAPED CHARGES 145 MM E() Specification : JSS 9310-01:2007 E Estab
3) 6334401000 LINERDRG. HEMRL/1437 DET.5 HDC-I Description : 6334401000 LINERDRG. HEMRL/1437 DET.5 HDC-I() Specification : LINER TO DRG.NO. HEMRL/MISC/SK/NO/ 1437 DET.NO.5 E Estab
4) 6334402100 LINER FOR HDC-II DRG.HEMRL/1438,D-5 Description : 6334402100 LINER FOR HDC-II DRG.HEMRL/1438,D-5() Specification : LINER TO DRG.NO. HEMRL/MISC/SK/ NO/ 1438 DET.NO. 5 E Estab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) COPPER LINER Description : COPPER LINER() Specification : AS PER DRAWING AND SPECIFICATION C Estab
Category : ddp
Grade : 1
Size : S
3523 Helios Polymers
Jyoti , Plot no 236 + 240, behind Oriental bank of commerce Near Shyamal cross roads, satellite Ahmedabad Gujarat
PIN1 : 380015
Phone No. : 40060060
GSTIN : 24AYZPB7364F1Z3 		AYZPB7364F

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432300003 TEFLON SHT ERA PANEL[64]() Specification : HEMRL/ED/PS/286, C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432300004 TEFLON SHT[64]() Specification : HEMRL /ED/PS/286 R Nonestab
2) 6432300006 TEFLON SHT[64]() Specification : HEMRL/PS/286 R Estab
3) 6432300005 TEFLON SHT[64]() Specification : HEMRL/PS/286 R Nonestab
4) 6432300007 TEFLON SHT FILM[64]() Specification : HEMRL/PS/286. R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6570250010 PACKING FITMENT FOR 155 MM BBU AS PER DRG NO PROP SK 802[65]() Specification : PACKING FITMENT FOR 155 MM BBU AS PER DRG NO PROP SK 802 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6432300006 TEFLON SHT Description : 6432300006 TEFLON SHT() Specification : HEMRL/PS/286 R Estab
Category : p
Grade : 3
Size : S
3524 Impex Chemical Corporation
7 Devkaran Mansion, 1st Floor, 24 Vithaldas Road, Princess Street, PO Box No. 2399, Mumbai 400002 Princess Street Mumbai Maharashtra
PIN1 : 400002
Phone No. : 22014864
GSTIN : 27AAAFI0493H1ZH 		MUMI00555C

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 1020871027 WAX PARAFIN SPL JSS 9160-06[10]() Specification : SPECN. NO. JSS 9160-06 R Nonestab
2) 1020871703 SHELLAC WAX AMMN. IND/ME/164 (B)[10]() Specification : SPECN. NO. IND/ME/164 R Nonestab
3) 1020870900 WAX MICRO CRYSTALLINE O.N.G.C. TYPE[10]() Specification : SPECN NO. IND/ME/868 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) ZINC OXIDE (1001941843)[10]() Specification : ZINC OXIDE 63 MICROMETER IS SIEVE "ZINC OXIDE SHOULD BE MANUFACTURED FORM ZINC SLAB" TO SPECN: JSS-6810-82:2011 REVISION NO-2). R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) WAX PARAFFIN SPECIAL JSS 9160 06 LF 1020871017 Description : WAX PARAFFIN SPECIAL JSS 9160 06 LF 1020871017() Specification : PARAFFIN WAX SPECIAL TO SPECN:-JSS-9160-06 :2002 (REV.NO.2) (reaffirmed 2011) DC NO.-5047-ME.DT.15/12/2011 R Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) ACETONE LF 1001010103[10]() Specification : IS 170-2004 (4TH REV.) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) METHYL ETHYL KETONE[10]() Specification : METHYL ETHYL KETONE. A.R/L.R.GRADE OF E.MERC/GLAXO. TO SPECN. IND/ME/371(B) FEB 1977 DC NO. 3754 ME, DATED12.12.02 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SHELLAC TO SPECN. JSS: 8010-17.[10]() Specification : JSS 8010-17 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001054123 BORAX, IS : 1109-1980 Description : 1001054123 BORAX, IS : 1109-1980() Specification : SPECN: BORAX TO IS: 1109-1980 (SECOND REVISION) P Estab
2) 1001942903 ZINC STEARATE JSS-6810-133:2001 Description : 1001942903 ZINC STEARATE JSS-6810-133:2001() Specification : SPECN.NO. JSS-6810-133:2001 P Estab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Melamine Make China/Indonesia Description : Melamine Make China/Indonesia() Specification : MELAMINE MAKE CHINA/INDONESIA. SPECN-(i)ASSAY,PERCENT BY MASS (MIN)-98,(ii) LOSS ON DRYING PERCENT BY MASS (MAX)-0.1 (iii) ASH CONTENT PERCENT BY MASS (MAX)-0.02.(iv) MELTING POINT DEG.-354 (DECOM) (V) BULK DENSITY,G/LIT-600 (VI)PARTICL R Estab
Category : p
Grade : 3
Size : O
1) Ordnance Factory Khamaria
Name Specification Use Status
1) POTASSIUM NITRATE GR I ITEM CODE 1001621710() Specification : POTASSIUM NITRATE Gr. I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN: IS-301-1982 (2ND REV.) (REAFFIRMED 2003) DC NO. 3810-ME DT. 5/5/04 R Estab
Category : s
Grade : Grade III
Size : S
3525 DHRUV CONTAINERS PVT. LTD.
PLOT NO. 27/A, NAGALWADI, NEAR MIDC INDUSTRIAL AREA, HINGNA ROAD NAGPUR Maharashtra
PIN1 : 440016
Phone No. : 9168522998 		AABCD3717B

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) METALLIC CONTAINER M4A2 SER Description : METALLIC CONTAINER M4A2 SER() Specification : METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94. R Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) 9911843271 PIECE PACKING B Description : 9911843271 PIECE PACKING B() Specification : AS PER OFBH SPECIFICATION R Estab
2) 9911843290 MFG AND SUPPLY OF ASSY 73A Description : 9911843290 MFG AND SUPPLY OF ASSY 73A() Specification : AS PER OFBH SPECIFICATION R Estab
3) 9911843291 MFG AND SUPPLY ASSY CY 74A Description : 9911843291 MFG AND SUPPLY ASSY CY 74A() Specification : AS PER OFBH SPECIFICATION R Estab
4) CATCH AS PER DRG. OFB/C/1561 Description : CATCH AS PER DRG. OFB/C/1561() Specification : CATCH AS PER DRG NO OFB/C/1561 & CQA PART NO. ISV-585A CORROSPONDING AHSP DRG NO.ISV-585A DC 35750 DATED 14/07/1994. R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) Package 155 MM Description : Package 155 MM() Specification : O DRGNO 4085561 WITH D.C.NO 35637-A TO ALL COMPONENTS AND CONNEC-TED DRAWINGS. R Estab
2) SUSTAINER CONTAINER MATERIAL Description : SUSTAINER CONTAINER MATERIAL() Specification : MANGO WOOD, AS PER SPECIFICATION NO. DRDL/TSQD/AK/023 REV1. FIG. NO.39 & PAGE NO.208. R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) Package 155 MM Description : Package 155 MM() Specification : O DRGNO 4085561 WITH D.C.NO 35637-A TO ALL COMPONENTS AND CONNEC-TED DRAWINGS. R Estab
2) SUSTAINER CONTAINER MATERIAL Description : SUSTAINER CONTAINER MATERIAL() Specification : MANGO WOOD, AS PER SPECIFICATION NO. DRDL/TSQD/AK/023 REV1. FIG. NO.39 & PAGE NO.208. R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6570453558 BOX C-43A (STL) "OG" AMMN.CONTAINER Description : 6570453558 BOX C-43A (STL) "OG" AMMN.CONTAINER() Specification : SPECN.NO. IA 1169(N) ISC.NO. 220 0F IS-5-1994 (FOURTH REVISION) (AMDT NO.1) (REAFFIRMED- 2000) C Estab
2) 6570950402 CONTAINER 3RK 33 METAL FOR 125MM Description : 6570950402 CONTAINER 3RK 33 METAL FOR 125MM() Specification : CONTAINER CONSISTING OF THE FOLLOWING ITEMS 1.BODY DET. NO. 010 2. COVER DET.NO. 020 3.BOLT DET. NO. 030 4. FORK DET.NO 005 C Estab
3) 6570960402 BOX C 51 A AMMN. CONTAINER Description : 6570960402 BOX C 51 A AMMN. CONTAINER() Specification : AMMUNITION CONTAINER BOX C 51-A (STEEL) FOR PACKING OF 125 MM HE TO DRG.PT.NO.ISV-572-A,DC NO.37051-A, DT.05.05.2006. C Estab
4) 6570963318 BOX C 52 A STEEL DRG NO ISV 573A Description : 6570963318 BOX C 52 A STEEL DRG NO ISV 573A() Specification : AMMUNITION CONTAINER BOX C 52-A (STEEL) FOR PACKING OF 125 MM HEAT TO DRG.PT.NO.ISV-573-A DC NO.37051-A DT 05-05-2006 . C Estab
5) 6571341952 CARRIER 13 A (OG), ISV 488-A Description : 6571341952 CARRIER 13 A (OG), ISV 488-A() Specification : SPECN.NO. IA 1169 C Estab
6) 6572328900 BOX STEEL 412/S-4 RKT 68MM HE/PRAC Description : 6572328900 BOX STEEL 412/S-4 RKT 68MM HE/PRAC() Specification : BOX STEEL NO.412 S/4 (GENERAL ARRANGEMENT) DRG.NO.ARDE 1248 AL NO. 49/96 DATE 08.11.96 WITH 5 FITMENTS OF DRG NO. ARDE 1249 DETAIL NO. 1,2,3,4 AND 5. (REQUIRED FOR PACKING OF 68 MM ROCKET HE/PRACTICE) C Estab
7) 6576773398 AMN CONTAINER BOX C 53A ISV 574 A Description : 6576773398 AMN CONTAINER BOX C 53A ISV 574 A() Specification : AMMUNITION CONTAINER BOX C 53-A (STEEL) FOR PACKING OF 130MMAMMUNITION TO DRG. PART NUMBER ISV 574-A DC NUMBER 37047-A DATED 20/03/2006. C Estab
Category : p
Grade : 3
Size : S
3526 GRAUER & WEIL(INDIA)LIMITED
GROWEL HOUSE, AKURLI ROAD, KANDIVILI-EAST. MUMBAI Maharashtra
PIN1 : 400101
Phone No. : 9869836859
GSTIN : 27AAACG3741K1ZL 		AAACG3741K

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001729904 SPECIAL THINNER LB 7873B FOR PINAKA Description : 1001729904 SPECIAL THINNER LB 7873B FOR PINAKA() Specification : SPECIAL THINNER LB-7873B FOR PINAKA ROCKET P Estab
2) 1011318632 EPOXYACRYLIC A C GREY PAINT Description : 1011318632 EPOXYACRYLIC A C GREY PAINT() Specification : EPOXYACRYLIC POLYSILOXINE ENAMEL A.C. GREY PAINT FOR PINAKA ROCKET P Estab
Category : p
Grade : 3
Size : S
3527 SARITA CASTINGS
15/137,Opp Fire brigade ,Near Jandu Tower,G.T Road, Miller Ganj Ludhiana Punjab
PIN1 : 141421
Phone No. : 501094
GSTIN : 03ADFFS3937C3ZB 		3652215127

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) FOUR TYPES OF CASTING[02] 1(a) Sand Castings/172 TY-4,GOST 977-88 1(b) Any type of Steel Castings/172 TY-5, GOST B-19184-73 2.Investment Castings/172 TY-10, GOST 977-88 3.Non Ferrous Castings/172 TY-6,GOST 1583-83, GOST 2685-75 4.Grey Iron Casting/ 172 TY-7, GOST 1412-85.() Specification : STEEL, SPECIAL STEEL, ALUMINIUM ALLOY. GREY CAST IRON & INVESTMENT CASTINGS R Nonestab
Category : p
Grade : Grade III
Size : S
3528 JEYENKAY PETROGELS PVT LTD
PLOT NO 3 & 4 SURVEY NO 207 UMARKUI KILVANI ROAD UMARKUI SILVASSA DADRA AND NAGAR HAVELI
PIN1 : 396230
Phone No. : 9323784856
GSTIN : 26AACCJ4070A1Z3 		MUMJ15258F

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1034901013 MINERAL JELLY [DROP POINT 60 DEGREE Description : 1034901013 MINERAL JELLY [DROP POINT 60 DEGREE() Specification : SPECN. NO.JSS 8030-09 P Estab
2) 1034901103 MINERAL JELLY TO JSS-8030-09:2002 Description : 1034901103 MINERAL JELLY TO JSS-8030-09:2002() Specification : SPECN.JSS-8030-09:2010 (REVISION NO.2) P Estab
Category : p
Grade : 3
Size : S
3529 HINDUSTAN PHOTO FILM MFG.CO.LTD
C-60, INDUSTRIAL ESTATE, AMBATTUR CHENNAI TAMILNADU
PIN1 : 600058
Phone No. : 04426241955 		CHEH03455E

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) INDUSTRIAL X-RAY FILM Description : INDUSTRIAL X-RAY FILM() Specification : INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595-1978 G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED. R Estab
Category : dp
Grade : 1
Size : L
3530 GLOBAL ENTERPRISES,
NEAR CENTRAL BANK, VARANGAON BHUSAWAL MAHARASHTRA
PIN1 : 425305
Phone No. : 09021542666 		ASVPB1752D

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) LABOURS FOR BAILING MACHINE Description : LABOURS FOR BAILING MACHINE() Specification : LABOURS FOR BAILING MACHINE R Estab
Category : p
Grade : 3
Size : S
3531 MAHARASHTRA ENVIRO POWER LTD.,
20, IT PARK, PARSODI NAGPUR MAHARASHTRA
PIN1 : 440022
Phone No. : 07126665000 		AAECM3522C

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) DISPOSAL OF PAINT SLUDGE Description : DISPOSAL OF PAINT SLUDGE() Specification : DISPOSAL OF PAINT SLUDGE R Estab
Category : p
Grade : 3
Size : S
3532 GAJANAN ENTERPRISES,
SHRI SAI NAGAR, SAKRI PHATA, BHUSAWAL MAHARASTRA
PIN1 : 425203
Phone No. : 09049463317 		AJDPM6705G

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) BOX H2A ASSEMBLY OF HINGE PINS Description : BOX H2A ASSEMBLY OF HINGE PINS() Specification : BOX H2A ASSEMBLY OF HINGE PINS R Estab
2) PAINTING SERVICES OF CYL533 Description : PAINTING SERVICES OF CYL533() Specification : PAINTING SERVICES OF CYL-533 R Estab
3) PROCESSING FOR AMMNBOX SM51 Description : PROCESSING FOR AMMNBOX SM51() Specification : PROCESSING FOR AMMN.BOX SM-51 R Estab
4) PROCESSING FOR AMMNCONTC44A Description : PROCESSING FOR AMMNCONTC44A() Specification : PROCESSING FOR AMMN.CONT.C-44A R Estab
5) PROCESSING FOR BOX SM 642 D Description : PROCESSING FOR BOX SM 642 D() Specification : PROCESSING FOR BOX SM-642-D R Estab
6) PROCESSING OF CYLINDER 12A Description : PROCESSING OF CYLINDER 12A() Specification : PROCESSING OF CYLINDER 12A R Estab
7) PROCESSING OF AMMN CONT BOX 43 Description : PROCESSING OF AMMN CONT BOX 43() Specification : PROCESSING OF AMMN.CONT.BOXC43 R Estab
8) PROCESSING OF BOX 601 MODIFIED Description : PROCESSING OF BOX 601 MODIFIED() Specification : PROCESSING OF BOX 601 MODIFIED R Estab
9) PROCESSING OF CARRIER 13A Description : PROCESSING OF CARRIER 13A() Specification : PROCESSING OF CARRIER 13A R Estab
10) PROCESSING OF CARRIER 6A Description : PROCESSING OF CARRIER 6A() Specification : PROCESSING OF CARRIER 6A R Estab
11) PROCESSING OF CARRIER 7A Description : PROCESSING OF CARRIER 7A() Specification : PROCESSING OF CARRIER 7A R Estab
12) PROCESSING OF PHOS PAINTING 53 Description : PROCESSING OF PHOS PAINTING 53() Specification : PROCESSING OF PHOS.PAINTING 53 R Estab
13) RIVETING OF CARRIER 6A Description : RIVETING OF CARRIER 6A() Specification : RIVETING OF CARRIER 6A R Estab
14) SERVICES FOR AMMNBOXSM171L Description : SERVICES FOR AMMNBOXSM171L() Specification : SERVICES FOR AMMN.BOX-SM-171-L R Estab
15) SERVICES FOR AMMNCONT SM 601 Description : SERVICES FOR AMMNCONT SM 601() Specification : SERVICES FOR AMMN.CONT SM-601 R Estab
16) SERVICES FOR AMMN CONT BOX 651 Description : SERVICES FOR AMMN CONT BOX 651() Specification : SERVICES FOR AMMN.CONT.BOX 651 R Estab
17) SERVICES FOR BOX H2A NEW Description : SERVICES FOR BOX H2A NEW() Specification : SERVICES FOR BOX H2A (NEW) R Estab
18) SERVICES FOR BOX H2A REPAIR Description : SERVICES FOR BOX H2A REPAIR() Specification : SERVICES FOR BOX H2A (REPAIR) R Estab
19) SERVICES FOR BOX H5A Description : SERVICES FOR BOX H5A() Specification : SERVICES FOR BOX H5A R Estab
Category : p
Grade : 3
Size : S
3533 MULTIMETALS LIMITED
HEAVY INDUSTRIAL AREA, KANUSA ROAD KOTA, RAJASTHAN RAJASTHAN RAJASTHAN
PIN1 : 324003
Phone No. : 07442481780 		 JDHM04608

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) DEOXIDISED COPPER TUBE TO SPECN JSS 4710 1 LATEST ISSUE IN AS EXTRUDED AND DRAWN CONDITION SIZE 83 point 7 I D X 4 point 5 plus 1point 5 MM X 300 MM LONG Description : DEOXIDISED COPPER TUBE TO SPECN JSS 4710 1 LATEST ISSUE IN AS EXTRUDED AND DRAWN CONDITION SIZE 83 point 7 I D X 4 point 5 plus 1point 5 MM X 300 MM LONG() Specification : DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG. R Estab
2) BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE DIA 42 MM WITH MIN 1 point 5 MTR STRAIGHT LENGTH Description : BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE DIA 42 MM WITH MIN 1 point 5 MTR STRAIGHT LENGTH() Specification : BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE: DIA 42 - 0 10 MM WITH MIN 1.5 MTR STRAIGHT LENGTH R Estab
3) EXTRUDED BRASS TUBE TO SPECN BS EN 12451 1999 SYMBOL CuZn30A No CW 707R MATERIAL CONDITION WITH HARDNESS 130 Hv MIN HAVING STRAIGHT LENGTH OF 2 MTRS MIN SIZE 25 point 5 MM O D X 21 point 5 MM I D Description : EXTRUDED BRASS TUBE TO SPECN BS EN 12451 1999 SYMBOL CuZn30A No CW 707R MATERIAL CONDITION WITH HARDNESS 130 Hv MIN HAVING STRAIGHT LENGTH OF 2 MTRS MIN SIZE 25 point 5 MM O D X 21 point 5 MM I D() Specification : EXTRUDED BRASS TUBE TO SPECN.BS:EN-12451:1999 SYMBOL CuZn30A No.CW 707R MATERIAL CONDITION WITH HARDNESS 130 Hv MIN HAVING STRAIGHT LENGTH OF 2 MTRS MIN SIZE:- 25.5 +/- 0.15 MM O/D, X 21.5 +/- O.15 MM I/D. R Estab
Category : ddp
Grade : 1
Size : L
3534 Narottamdas & Company
41, Babulban, Gopal Gwalani Road , Shastri Nagar Square Nagpur Maharashtra
PIN1 : 440008
Phone No. : 9822278625
GSTIN : 27AADHM6696P1Z8 		AADHM66961

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001010101 ACETONE TO SPECN.IS-170-1986(3RDRV) Description : 1001010101 ACETONE TO SPECN.IS-170-1986(3RDRV)() Specification : SPECN NO.IS:170-1986 P Estab
2) 1001713000 SODA ASH TECHNICAL LIGHT GRADE Description : 1001713000 SODA ASH TECHNICAL LIGHT GRADE() Specification : IS: 251- 1998 P Estab
3) 1001721006 CAUSTIC SODA TECH FLAKE IS 252 1991 Description : 1001721006 CAUSTIC SODA TECH FLAKE IS 252 1991() Specification : IS-252-1991 P Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001010101 ACETONE TO SPECN.IS-170-1986(3RDRV) Description : 1001010101 ACETONE TO SPECN.IS-170-1986(3RDRV)() Specification : SPECN NO.IS:170-1986 P Estab
2) 1001713000 SODA ASH TECHNICAL LIGHT GRADE Description : 1001713000 SODA ASH TECHNICAL LIGHT GRADE() Specification : IS: 251- 1998 P Estab
3) 1001721006 CAUSTIC SODA TECH FLAKE IS 252 1991 Description : 1001721006 CAUSTIC SODA TECH FLAKE IS 252 1991() Specification : IS-252-1991 P Estab
Category : p
Grade : 3
Size : S
3535 SOMANI ENGINEERING ENTERPRISE
6C LALA LAJPAT RAI SARANI 4TH FLOOR KOLKATA WEST BENGAL
PIN1 : 700020
Phone No. : 9830057978 		CALS42705F

Download 		1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) Lug Anchoring Assy in F C for TU-1111. Description : Lug Anchoring Assy in F C for TU-1111.() Specification : Det-69 to Drg No.ARDE-2139 C Estab
2) LOCATING PIN FOR TU 1111 Description : LOCATING PIN FOR TU 1111() Specification : DRG NO- ARDE 2139 DET 6 C Estab
3) Bracket for Return Spring in F C for Tail Unit (BTU-450) Description : Bracket for Return Spring in F C for Tail Unit (BTU-450)() Specification : Det.3 to Drg No.ARDE-2121 C Estab
4) .Washer in FC() Specification : Det-51 to Drg No.ARDE-2121 C Estab
5) ADAPTER BLANKING() Specification : DRG.NO.ARDE-9501-03 DET. NO.39 C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) Lug Anchoring Assy in F C for TU-1111. Description : Lug Anchoring Assy in F C for TU-1111.() Specification : Det-69 to Drg No.ARDE-2139 C Estab
2) LOCATING PIN FOR TU 1111 Description : LOCATING PIN FOR TU 1111() Specification : DRG NO- ARDE 2139 DET 6 C Estab
3) Bracket for Return Spring in F C for Tail Unit (BTU-450) Description : Bracket for Return Spring in F C for Tail Unit (BTU-450)() Specification : Det.3 to Drg No.ARDE-2121 C Estab
4) .Washer in FC() Specification : Det-51 to Drg No.ARDE-2121 C Estab
5) ADAPTER BLANKING() Specification : DRG.NO.ARDE-9501-03 DET. NO.39 C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) Lug Anchoring Assy in F C for TU-1111. Description : Lug Anchoring Assy in F C for TU-1111.() Specification : Det-69 to Drg No.ARDE-2139 C Estab
2) LOCATING PIN FOR TU 1111 Description : LOCATING PIN FOR TU 1111() Specification : DRG NO- ARDE 2139 DET 6 C Estab
3) Bracket for Return Spring in F C for Tail Unit (BTU-450) Description : Bracket for Return Spring in F C for Tail Unit (BTU-450)() Specification : Det.3 to Drg No.ARDE-2121 C Estab
4) .Washer in FC() Specification : Det-51 to Drg No.ARDE-2121 C Estab
5) ADAPTER BLANKING() Specification : DRG.NO.ARDE-9501-03 DET. NO.39 C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) Lug Anchoring Assy in F C for TU-1111. Description : Lug Anchoring Assy in F C for TU-1111.() Specification : Det-69 to Drg No.ARDE-2139 C Estab
2) LOCATING PIN FOR TU 1111 Description : LOCATING PIN FOR TU 1111() Specification : DRG NO- ARDE 2139 DET 6 C Estab
3) Bracket for Return Spring in F C for Tail Unit (BTU-450) Description : Bracket for Return Spring in F C for Tail Unit (BTU-450)() Specification : Det.3 to Drg No.ARDE-2121 C Estab
4) .Washer in FC() Specification : Det-51 to Drg No.ARDE-2121 C Estab
5) ADAPTER BLANKING() Specification : DRG.NO.ARDE-9501-03 DET. NO.39 C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) Lug Anchoring Assy in F C for TU-1111. Description : Lug Anchoring Assy in F C for TU-1111.() Specification : Det-69 to Drg No.ARDE-2139 C Estab
2) LOCATING PIN FOR TU 1111 Description : LOCATING PIN FOR TU 1111() Specification : DRG NO- ARDE 2139 DET 6 C Estab
3) Bracket for Return Spring in F C for Tail Unit (BTU-450) Description : Bracket for Return Spring in F C for Tail Unit (BTU-450)() Specification : Det.3 to Drg No.ARDE-2121 C Estab
4) .Washer in FC() Specification : Det-51 to Drg No.ARDE-2121 C Estab
5) ADAPTER BLANKING() Specification : DRG.NO.ARDE-9501-03 DET. NO.39 C Estab
Category : dp
Grade : 3
Size : S
3536 PACKWELL PAPER TUBE INDUSTRIES.
1226 HSIDC INDUSTRIAL ESTATE, PHASE-V, DIST :- SONEPAT RAI HARIYANA
PIN1 : 131029
Phone No. : 01302367226
GSTIN : 06AABFP6308D1ZN 		DELPO9419E

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) SERVICES FOR CONTAINER 39 A L Description : SERVICES FOR CONTAINER 39 A L() Specification : SERVICES FOR CONTAINER 39 A/L R Estab
2) VARNISHING CEMENTING FOR 39 AL Description : VARNISHING CEMENTING FOR 39 AL() Specification : VARNISHING, CEMENTING FOR 39 AL R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PAPER WHITE FINE,0.089MM TH. 84-92GSM() Specification : JSS:9310-06:2002 R Estab
2) BOARD GLAZED CALENDERED AMMUNITION 914.4 mm X304.8 mm X 0.508 mm + - 0.051 mm THICK SPECN. JSS 8135-13() Specification : JSS 8135-13:2007 R Estab
3) CONTAINER NO R4 MK-1 (IN) (EMPTY ASSY), DRG. NO. ARDE 2055,SHEET NO 6() Specification : DRG. NO. ARDE 2055,SHEET NO 6 R Estab
4) CONTAINER NO. R 5 MK1 (EMPTY ASSEMBLY) TO DRG.NO. ARDE 2225 SHEET NO.6() Specification : DRG.NO. ARDE 2225 SHEET NO.6 R Estab
5) MILL BOARD AMMN 787.4 MM X 558.8 MM X 1.25 MM() Specification : JSS 9310-01:2014 R Estab
Category : p
Grade : 3
Size : S
3537 YOHANA PAINT
E-2/100 ARERA COLONY BHOPAL Madhya Pradesh, 462016 ARERA COLONY BHOPAL Madhya Pradesh
PIN1 : 462016
Phone No. : 07552421970
GSTIN : 23AAZPG0968N1Z0 		BPLSO8800B

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1011312220 PAINT OLIVE GREEN MATT FINISH Description : 1011312220 PAINT OLIVE GREEN MATT FINISH() Specification : OF ISC-220 OF IS-5-1994 (FOURTH REVISION) REAF.2000 AMND NO.1.TO SPECN. IS-168-1993 THIRD REVISION P Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) PAINT READY MIXED AIR DRG BUFF MIDDLE Description : PAINT READY MIXED AIR DRG BUFF MIDDLE() Specification : PAINT READY MIXED AIR DRYING FOR GENERAL PURPOSE SEMI GLOSSY FINISHED SPRAYING BUFF MIDDLE COLOUR TO (ISC: 359) OF IS:5-1994 (4TH REV.) AMMENDMENT TO NO. 1 TO IS :168:1993 (3RD REV.) AS APPLICABLE FOR DEFENCE USE P Estab
2) READY MIXED PAINT AIR DRYING WHITE SEMIGLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECN. IS: 168-1993 (THIRD REVISION) Description : READY MIXED PAINT AIR DRYING WHITE SEMIGLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECN. IS: 168-1993 (THIRD REVISION)() Specification : READY MIXED PAINT AIR DRYING WHITE SEMIGLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECN. IS: 168-1993 (THIRD REVISION) P Estab
3) PAINT READY MIXED AIR DRYING SEMI Description : PAINT READY MIXED AIR DRYING SEMI() Specification : PAINT READY MIXED SPRAYING AIR DRYING SEMI GLOSSY FINISHED LIGHT BRUNSWICK GREEN FOR GENERAL PURPOSE ISC: 225 OF IS: 5-1994 (4TH REV.) AMMENDMENT NO. 1 TO SPECN IS: 168/1993 ( 3RD REV.) AS APPLICABLE FOR DEFENCE USE. P Estab
Category : p
Grade : 2
Size : S
3538 INDARKALA UDYOG
10, Dr, Rajendra Prasad Sarani, 2nd Floor, Room No. 206/3 KOLKATA WEST BENGAL
PIN1 : 700001
Phone No. : 9331008046 		CALM04177F

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) HOLSTER MADE OF LEATHER TO ACCOMODATE 0 POINT 32INCH PISTOL Description : HOLSTER MADE OF LEATHER TO ACCOMODATE 0 POINT 32INCH PISTOL() Specification : HOLSTER MADE OF LEATHER TO ACCOMODATE 0.32'' PISTOL C Estab
2) HOLSTER MADE OF LEATHER TO ACCOMMODATE MODIFIED O.32" PISTOL TO DRG. NO-CTM-0133 Description : HOLSTER MADE OF LEATHER TO ACCOMMODATE MODIFIED O.32" PISTOL TO DRG. NO-CTM-0133() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 1
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) DISC PWF(0.79 INCH) 20.07MM DIA,0.051MM THICK TO SPECN Description - DISC PWF(0.79 INCH) 20.07MM DIA, 0.051MM THICK TO SPECN() DISC PWF(0.79 INCH) 20.07MM DIA,0.051MM THICK TO SPECN -JSS-9310-06-2002 REAFFIRMED 2011 DESIGNERS REF.NO.CIA/AMN/1435, PART NO. IQX 136 DC.NO.36662-A Dt.23.03.2000.GF.ITEM NO.3 C Estab
2) GASKET Description - GASKET() GASKET TO DRG.NO.bW 8.685.066-01 (3- 0116278), DCI NO.34183-A, DT-28.7.87. MATERIAL WRAPPING PAPER TO SPEC. GOST-8273-75, GSM 60 -120/JSS 8135-017- 2002, DC NO. 3721- ME/ 16.05.2002. C Estab
3) GASKET TO DRG.NO.bW 8.685.066(3- 0116278),DCI NO.34183-A, DT-28.7.87. MATERIAL CARD BOARD Description - GASKET TO DRG.NO.bW 8.685.066 (3- 0116278), DCI NO.34183-A, DT-28.7.87. MATERIAL CARD BOARD() GASKET TO DRG.NO.bW 8.685.066 (3- 0116278), DCI NO.34183-A, DT-28.7.87. MATERIAL CARD BOARD TO SPEC. GOST-7933-75/JSS 8135-15-2010, REV-2, DC-4066- ME, DT.19.07.10. C Estab
4) PAPER BROWN (WAXED), 280 x 195(MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT Description - PAPER BROWN (WAXED), 280 x 195 (MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT() PAPER BROWN (WAXED), 280 x 195 (MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT AMMN. TO SPEC. JSS-8135-05 -2013, REV.4 DC-5186-ME DT.19.03.14. C Estab
5) PAPER BROWN (WAXED), 320 x 280 (MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT Description - PAPER BROWN (WAXED), 320 x 280 (MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT() PAPER BROWN (WAXED), 320 x 280 (MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT AMMN. TO SPEC. JSS-8135-05 -2013, REV-4 DC NO-5186 ME DT.19.03.14. C Estab
6) MIIL BOARD (WAXED), 290x200x2.5 (MM) (TOP SUPPORT) USING MATERIAL MILL BOARD Description - MIIL BOARD (WAXED), 290x200x2.5 (MM) (TOP SUPPORT) USING MATERIAL MILL BOARD() JSS-9310-01-2014 REV-3 DC NO.5290-ME DT.16.12.14 AND PARAFFIN WAX AMMN.TO JSS-9160-09-2010 REV-1 DC-5024-ME DT.01.08.11. C Estab
7) MILL BOARD (WAXED) 200X200X2.5 (MM) (END SUPPORT) USING MATERIAL SPECN.MILL BOARD Description - MILL BOARD (WAXED) 200X200X2.5 (MM) (END SUPPORT) USING MATERIAL SPECN. MILL BOARD() MILL BOARD (WAXED) 200X200X2.5 (MM) (END SUPPORT) USING MATERIAL SPECN. MILL BOARD TO JSS-9310-01-2014, REV-3 DC NO.5290 ME DT.16.12.14 AND PARAFFIN WAX AMMN. TO JSS- 9160-09 2010-REV-1 DC 5484 ME DT.24.09.16. C Estab
8) DISC D-18B7MM x 0.5 TO 0.9 MM THICK MATERIAL SPECN.TO GOST-21641-76 OR MILL BOARD Description - DISC D-18B7MM x 0.5 TO 0.9 MM THICK MATERIAL SPECN.TO GOST-21641-76 OR MILL BOARD() DISC D-18B7MM x 0.5 TO 0.9 MM THICK MATERIAL SPECN. TO GOST-21641-76 OR MILL BOARD TO JSS-9310-01-2014, REV-3, DC NO. 5290-ME DT-16.12.14 OR BOARD STRAW TO SPECN. JSS-8135-11-2008 (REVISION NO.2) DC NO.3553-ME,DT. 12.3.99 REF DRG.NO.4-027043 P-A00E14-79 3 C Estab
9) PAD FELT (D-45+/-1MM,T-6.4+/-0.65MM Description - PAD FELT(D-45+/-1MM,T-6.4+/-0.65MM() PAD FELT(D-45+/-1MM,T-6.4+/-0.65MM TO DRG.NO.155-1080, DC NO. 36792-A, DT.01.11.2001. C Estab
10) WAX PAPER KRAFT CUP DISC TYPE, SIZE- 194 DIA+/- 1MM, THICKNESS-0.18MM) MATERIAL-PAPER KRAFT AMMN. Description - WAX PAPER KRAFT CUP DISC TYPE, SIZE- 194 DIA+/- 1MM,THICKNESS-0.18MM) MATERIAL-PAPER KRAFT AMMN.() SPECN. JSS-8135-17-2016 REV-1 SUBSTANCE- 125 +/- 5 GSM (NOTE- MATERIAL WAXED WITH PARAFFIN WAX SPECIAL TO SPECN. JSS-9160-06-2002 REV-2, REFD-2011, DC.NO.5047-ME, DT. 15.12.11. C Estab
11) PAD TO DRG. 6387456, DC.NO-36569-A, DT -22.06.99 Description - PAD TO DRG. 6387456, DC.NO-36569-A, DT -22.06.99.() PAD TO DRG. 6387456, DC.NO-36569-A, DT -22.06.99, FOR 155MM SHELL M107 (SIZE- 45MM DIA x 10MM THICK). C Estab
12) DISC-II NO.23 Description - DISC-II NO.23() SPECN. OST-84-796-78, INDIGENOUS EQUIVALENT MATERIAL-BOARD GLAGED CALANDER AMMN TO JSS-8135-13-2007, REV-2 OR MILL BOARD AMMN.(CUPPING QUALITY) TO JSS-9310-01-2007, REV.2. C Estab
13) CYLINDER TO DRG.NO. BL/CD/CC-130/035 DT.16.04.2001. (REF. DRG. NO. 3-022483/54-bH Description - CYLINDER TO DRG.NO. BL/CD/CC-130/035 DT.16.04.2001. (REF. DRG. NO. 3-022483/54-bH() CYLINDER TO DRG.NO. BL/CD/CC-130/035 DT.16.04.2001. (REF. DRG. NO. 3-022483/54-bH-482/13, DC NO. 36134-A, DT.04.07.96 NOTE-TO BE SUPPLIED AS PER SMALL CYLINDER OF SIZE- LENTH-50MM x ID-115MM. C Estab
14) NORMAL COVER TO DRG.3-022483/54-bH- 482 Description - NORMAL COVER TO DRG. 3-022483/54-bH- 482() NORMAL COVER TO DRG. 3-022483/54-bH- 482/Cd18, DC NO.36134-A, DTD.04.07.96 C Estab
15) DISC(WAXED) 128MM DIA x 6MM THICK WAXED ITEM NO-5 Description - DISC(WAXED) 128MM DIA x 6MM THICK WAXED ITEM NO-5() DISC(WAXED) 128MM DIA x 6MM THICK WAXED ITEM NO-5 PART NO. ISV-483 GA. DCI 35983-A Dt.29.07.95 MATERIAL- MILL BOARD TO JSS-9310-01-2014 REV-3 DC 5290 ME DT 16-12-14. C Estab
16) DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA Description - DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA() DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO. ISV-483 GA. DCI 35983-A DT.29.07.95. MATERIAL- MILL BOARD TO JSS-9310-01-2014 REV-3 DC.5290 ME DTD-16-12-14. C Estab
17) STRENGTHENED COVER TO DRG. 3-022483 Description - STRENGTHENED COVER TO DRG.3-022483() STRENGTHENED COVER TO DRG. 3-022483 /54-bH-482/12, DC NO.36134-A, DT.4.07.96. C Estab
18) PAPER TUBE (AP/T) ID-17A5mm x OD-18.1 C5mm x L-19.5B8Amm TO Description - PAPER TUBE (AP/T) ID-17A5mm x OD-18.1 C5mm x L-19.5B8Amm TO() PAPER TUBE (AP/T) ID-17A5mm x OD-18.1 C5mm x L-19.5B8Amm TO MATERIAL SPECN. PAPER CRAFT AMMN.TO JSS 8135-017-2002, REAF-2010 DC-5016-ME , DT-16.03.11. C Estab
19) PAPER WHITE FINE, SIZE- L-762 x W-508 (MM), SUBSTANCE 42-46 GRRAM/SQ.METRE Description - PAPER WHITE FINE, SIZE- L-762 x W-508 (MM), SUBSTANCE 42-46 GRRAM/SQ.METRE() PAPER WHITE FINE, SIZE- L-762 x W-508 (MM), SUBSTANCE 42-46 GRAM/SQ.METRE AND THICHNESS - 0.051 +/- 0.005MM TO SPECN. JSS-9310-06- 2002, DC NO. 3738-ME, DT.17.09.2002 (REAFFIRMED 2011). C Estab
20) DISC TO DRG. CIA/AMN/1901 DETAIL.2 PART NO. IQX-783 FOR PELLET SMOKE Description - DISC TO DRG. CIA/AMN/1901 DETAIL.2 PART NO. IQX-783 FOR PELLET SMOKE() DISC TO DRG. CIA/AMN/1901 DETAIL.2 PART NO. IQX-783 FOR PELLET SMOKE, 42.5 GRAM, TNT/AL70/30 TO DRG. CIA/AMN/1901 DCI 35462-A DT.3.3.93. (MATERIAL- PAPER WHITE FINE TO SPECN. JSS 9310-06-2002 REAFFIRMED 2011) C Estab
21) DISC PAPER WRAPPING HARD, 30.99 MM DIA. MATERIAL- PAPER CRAFT AMMN. Description - DISC PAPER WRAPPING HARD, 30.99 MM DIA. MATERIAL- PAPER CRAFT AMMN.() JSS-8135-17:2016, REV-1, DC-5493-ME DT.24.09.2016 FOR CE PELLET (MK 1/1/L, 53.16 GRAM) TO DRG. NO.SX 12 AF. DC NO. 35452-A DT.07.09.93. C Estab
22) WASHER LEATHER LUBRICATED, OD-59.69MM, ID-48.26MM, THICKNESS-2.03MM Description - WASHER LEATHER LUBRICATED, OD-59.69MM, ID-48.26MM, THICKNESS-2.03MM() REF. DRG.NO. ISX-343, DS CAT NO-5330-003641. DCI 36265-A DT.02.04.97. C Estab
23) PELLET COVERING TO DRG. CIA/AMN/1901 DET.4, PART NO. IQX 785 Description - PELLET COVERING TO DRG. CIA/AMN/1901 DET.4, PART NO. IQX 785() PELLET COVERING TO DRG. CIA/AMN/1901 DET.4, PART NO. IQX 785 FOR PELLET SMOKE, 42.5 GRAM, TNT/AL-70/30 TO DRG. CIA/AMN/1901 DCI 35462-A DT.03.03.93. C Estab
24) GLAZED BOARD WASHER TO DRG.NO. FD672 Description - GLAZED BOARD WASHER TO DRG.NO.FD672() DRG. PART NO.QX-175, DC NO. 36103-A DT.29.03.96. C Estab
25) FELT JUTE, SIZE- 200 x 200 x 5 to 6.3(MM) SOFT QUALITY TO SPECN. IND/ME/889 Description - FELT JUTE, SIZE- 200 x 200 x 5 to 6.3(MM) SOFT QUALITY TO SPECN. IND/ME/889() FELT JUTE, SIZE- 200 x 200 x 5 to 6.3(MM) SOFT QUALITY TO SPECN. IND/ME/889(PROV), DC NO.3176-ME, DT.12/08/94. C Estab
26) FELT JUTE, SIZE- 280x200x5 to 6.3(MM) SOFT QUALITY Description - FELT JUTE, SIZE- 280x200x5 to 6.3(MM) SOFT QUALITY() IND/ME/889(PROV), DC NO.3176-ME, DT.12/08/94. C Estab
27) TUBE, PAPER TO DRG.NO. ISX 18 SA DESIGNERS REF NO-CIA/AMN Description - TUBE, PAPER TO DRG.NO.ISX 18 SA DESIGNERS REF NO-CIA/AMN() TUBE, PAPER TO DRG.NO. ISX 18 SA DESIGNERS REF NO-CIA/AMN/1900. DCI 35462-A DT.03.03.93. C Estab
28) DISC TO DRG.NO.2-013535/53-00-482M Description - DISC TO DRG.NO.2-013535/53-00-482M() DISC TO DRG.NO.2-013535/53-00-482M/ 14, DC NO.36785-A, DT.08.10.2001. C Estab
29) PAPER CARTON BOARD TO JSS-8135-15-2010, REV.NO.2 DC NO.4066 ME Description - PAPER CARTON BOARD TO JSS-8135-15-2010, REV.NO.2 DC NO.4066 ME() PAPER CARTON BOARD TO JSS-8135-15-2010, REV.NO.2 DC NO.4066 ME, DT.19.07.10 WITH CUPPING QUALITY SIZE- 760MM x 890MM x 0.762MM THICK. C Estab
30) FELT DISC TO DRG.NO-6387455, DC.NO- 36569-A Description - FELT DISC TO DRG.NO. 6387455, DC.NO. 36569-A() FELT DISC TO DRG.NO. 6387455, DC.NO- 36569-A, DT-22.06.99. C Estab
31) DISC DIA. 32.25MM x 0.5MM THICK GLAZED BOARD TO SPEC. JSS-8135- Description - DISC DIA. 32.25MM x 0.5MM THICK GLAZED BOARD TO SPEC. JSS-8135-() DISC DIA. 32.25MM x 0.5MM THICK GLAZED BOARD TO SPEC. JSS-8135-13-2014, REV-3, DC-5257-ME, DT.18.06.14 PA 1992 WAXED (REF- DESIGNERS REF. NO. CIA/AMN/2176, PART NO.ISX-77GF, ITEM NO-9 DC. 37013-A, DT.06.05.2005) C Estab
32) PACKING TO DRG Description - PACKING TO DRG() PACKING TO DRG.NO. 4-24929/3 K33/001 DC NO.35604-A, DT.11.10.93 (MATERIAL TO SPECN. IND/ME/645(a), DC NO.3754-ME, DT.12.12.02.) C Estab
33) SUPPORT TO DRG Description - SUPPORT TO DRG() SUPPORT TO DRG.NO. 4-24929/3 K33/060 DC NO.36735-A, DT-29.01.2001. C Estab
Category : p
Grade : 3
Size : S
3539 PEMRAJ INDUSTRIES
1194/18A, SHIVAJI NAGAR KRISHNANAND PUNE MAHARASHTRA
PIN1 : 411005
Phone No. : 02025535663 		PNEP 02306

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) LOCKING NUT TO CQA A DRG N O 3 016919 DET 55DC 37284 A DT 06 7 2011 Description : LOCKING NUT TO CQA A DRG N O 3 016919 DET 55DC 37284 A DT 06 7 2011() Specification : LOCKING NUT TO CQA(A)DRG.N O. 3-016919 DET-55DC-37284-A DT.06.7.2011 C Estab
Category : ddp
Grade : 1
Size : S
3540 O.K.Engineers&Marketers , ,
301, Dakshinamurti road, Opp. Warharpande House, Sir Madhavrao Deshapande Marg, Nagpur Maharashtra
PIN1 : 440032
Phone No. : 9423106212
GSTIN : 27AMVPK8922A1ZS 		AMVPK8922A

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1753257723 NAIL WIRE IRON PL.HD.SZ-20MM X 18 G() -- R Estab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) CUTTING & STITCHING OF BAGS M4A2 Description : CUTTING & STITCHING OF BAGS M4A2() Specification : CUTTING & STITCHING OF CHARGE BAGS FOR M4A2 AS PER DRG.NO- 12882-2-0 TO 12884-2-0,12885-1-0,12886-0-0,12887-0-0,12888-1 -0,12890-2-0,NO 12909-0-0 , 12910-0-0,14776-0-0 TO 14778-0- 0,13976-0-0,12891-0-0,12899-0-0,12905-0-0. MATERIAL WILL R Estab
2) CUTTING & STITCHING OF CHARGE BAG-9 Description : CUTTING & STITCHING OF CHARGE BAG-9() Specification : CUTTING AND STITCHING OF CHARGE BAGS FOR CHARGE 9 OF 155MM AMMN.AS PER DRG.NO-6388103,6388104,6388106,6388115,6388116, 6355588,5191810,5173926,4090246,4090247,4079932. MATERIAL WILL BE SUPPLIED BY OFBA. R Estab
3) SURGICAL HAND GLOVES S-7 1/2" Description : SURGICAL HAND GLOVES S-7 1/2"() Specification : SURGICAL HAND GLOVES S-7 1/2" (SEVEN AND HALF) ISI MARKED, NO. IS-4148 (DIALOMATIC) R Estab
4) BAG MADE OF REEL CLOTH Description : BAG MADE OF REEL CLOTH() Specification : BAG MADE OF REEL CLOTH AS PER DRG NO.OFBA/NCP/EXPN/17 R Estab
5) METALISED POLISTER FILM Description : METALISED POLISTER FILM() Specification : METALISED POLYSTER FILM HAVING THICKNESS 12.5 MICRONS LAMINATED WITH POLYTHENE OF 150 GAUGE. R Estab
Category : ddp
Grade : 3
Size : S