1) MANGANESE PURE ELECTROLYTIC CONTENT 0865073000
Description : MANGANESE PURE ELECTROLYTIC CONTENT 0865073000()
Specification : MANGANESE PURE (ELECTROLYTIC) CONTENT OF Mn-99.5% WITH CHEMICAL COMPOSITION: Al - 0.25% Max., Cu - 0.1% Max., Fe - 0.15% Max., Si - 0.02% Max., Pb - 0.005% Max., Mn - REMAINDER (NOT LESS THAN 99.5%)
R
Estab
Category : p
Grade : 3
Size :
O
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) MAGNESIUM PURE INGOTS 0650000000
Description : MAGNESIUM PURE INGOTS 0650000000()
Specification : MAGNESIUM PURE INGOTS,CONTENTS OF 99.8% MIN.TO SPECN. IS:6694-1981,EACH INGOTS WEIGHING UP TO 5 KG APPROX.
R
Estab
Category : ddp
Grade : 1
Size :
S
1Ordnance Factory Medak
[ENR Registration]
Name
Specification
Use
Status
1) MANGANESE METTALIC AS PER IS 2021 7
Description : MANGANESE METTALIC AS PER IS 2021 7()
Specification : MANGANESE METTALIC AS PER IS 2021 7
1) SHEET MS 2500 x 1000 x 1 6 mm IS513 CR DD LF 0121020016
Description : SHEET MS 2500 x 1000 x 1 6 mm IS513 CR DD LF 0121020016()
Specification : C.R. SHEETS TO SPECN: IS-513-2008 (FIFTH REVISION) (REAFFIRMED 2013)-DD ANNEALED AND SKIN PASSED CONDICTION 2500 MM X 1000 MM X 1.6 MM.
R
Nonestab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Steel strip cold rolled closed annealed bright finished 3 56mm thick X 80mm wide in length of 2 mtrs LF0122223036
Description : Steel strip cold rolled closed annealed bright finished 3 56mm thick X 80mm wide in length of 2 mtrs LF0122223036()
Specification : Steel strip cold rolled closed annealed bright finished 3.56(+0.10/-0.00) mm thick X 80 +/-0.25mm wide in length of 2 mtrs to specn:- IS-513:2008 (Fifth Revision) Grade "DD" Temper 5(Annealed)
R
Nonestab
2) copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020
Description : copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020()
Specification : COPPER STRIP 20+/_ 0.2 X 0 75 + 0 02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN BS EN 1652
Specification : STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS)
Specification : MILD STEEL STRIP 100+/-1 MM WIDE x 26 BG (0.50MM) THICK IN ROLLS COLD DRAWN ANNEALED BEST SURFACE TYPE D MATT FINISHTO SPECN:-IS-513-2008 (FIFTH REVISION) WEIGHT OF EACH ROLLSHOULD BE BETWEEN 50 KG TO 100 KG.
C
Nonestab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS ROD 8 5 MM LF 0711906011
Description : BRASS ROD 8 5 MM LF 0711906011()
Specification : TO SPECN:IS-319-2007 REVISION NO.5 (REAFFIRMED -2017) GRADE 1 IN HALF HARD CONDITION
Specification : BRASS STRIP 24 X 0.457 (+/-0.02) MM TO SPECN.IS:410-1977 (THIRD REVISION)(REAFFIRMED 2006) AMENDMENT NO.1 APRIL 1981DESIG.Cu Zn 30 IN ANNEALD CONDITION.
R
Nonestab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025
Description : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025()
Specification : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION IS-2062:2011(7th REVISION) GRADE:E250 (QUALITY A)
Specification : CR SHEET 1.60X1250X2500 MM IS: 513 GR "D" SK
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ALU SHEET 2400X1200X3MM IS737 24345 LF 0615420003[06]()
Specification : ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
R
Nonestab
2) ALU ALLOY ROD 7 MM IS 733 64430 ITEM CODE 0611505008[06]()
Specification : ALUMINIUM ALLOY ROD 7.00(+/-0.05)MM DIA IN STRAIGTH LENGTH OF 2.5 TO 3 METRES TO SPECN.IS:733-1983 DESIGNATION 64430CONDITION "WP" OR IS:733-1983 DESIGNATION 24345 "W" WITHMAXIMUM ALLOWABLE PERIPHERIAL GRAIN GROWTH ON EXTRUDEDSECTION - 5%
C
Nonestab
3) ALU STRIP 55X0 3MM IS 737 19500 LF 0615361047[06]()
Specification : ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.
Specification : BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
R
Nonestab
2) BRASS STRIP 25 4X0 63 MM LF 0717560949[07]()
Specification : BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 1
R
Nonestab
3) COPPER STRIP 15X0 26MM LF 0700661042[07]()
Specification : COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDN
R
Nonestab
4) BRASS STRIP 102 X 3 66 MM BS2871 CZ126 LF 0717560694[07]()
Specification : BRASS STRIP 102 +/-0.5 MM WIDE X 3.66 +/-0.05 MM THICK IN LENGTH OF 2.5 TO 3 METERS TO SPECN:BS2871 PART 2:1972:CZ126 CONDITION M (STRESS RELIEVED) OR JSS 9535-02:2008(REVISION NO.3)(ANNEALED).
R
Nonestab
5) copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020[07]()
Specification : COPPER STRIP 20+/_ 0.2 X 0 75 + 0 02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN BS EN 1652
Specification : COPPER STRIP 16+/-0.2 X 0.32+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BSEN 1652:1998,MATL SYMBOL Cu-ETPMATL CONDN R-220.MATERIAL MUST BE HOMOGENEOUS, FREE FROMBURRS, BOWINESS (MAX) 2MM/MTR.COIL WT.8-10KG. ID WITH NYLONRING 300M
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL STRIP 40x0point35 mm LF 0121060051
Description : STEEL STRIP 40x0point35 mm LF 0121060051()
Specification : STEEL STRIP SIZE 40 +/-0.5 MM WIDE X 0.35 +/-0.03 MM THICK TO SPECN:IS-513-2008 (FIFTH REVISION) GR.CR-3 OR GD I CS OFBS-1449-SECTION 1.1:1991 QUALITY IN ANNEALED AND SKIN PASSED CONDITION IN COIL OF 50 KG WEIGHT EACH.
R
Nonestab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL TAPE BAND 12 point7 X 0 point45MM ITEM CODE 0133060104
Description : STEEL TAPE BAND 12 point7 X 0 point45MM ITEM CODE 0133060104()
Specification : COLD ROLLED STEEL STRIP (STEEL TAPE BANDING) 12.7 MM WIDTH X 0.45MM THICK(26SWG) IN C.R.STEEL STRIPPING SOFT BLUE FINISHHAVE TENSILE STRENGTH 60 TO 80KG/MM SQR WITH SHEAR EDGE IN COIL,OILED WITH SHELL EXISTS 256 WITH WAXED PAPER AND RESI
R
Nonestab
Category : s
Grade : 3
Size :
S
1Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 6432300008 MS PLATE 3MM TH PHOS ERA
Description : 6432300008 MS PLATE 3MM TH PHOS ERA()
Specification : IS:2062-1994
P
Estab
2) 0145061109 STRIP ST.COLD ROL 0.5MM THX190 MM W
Description : 0145061109 STRIP ST.COLD ROL 0.5MM THX190 MM W()
1) M S PLATE SZ 3 MM PHOSPATED
Description : M S PLATE SZ 3 MM PHOSPATED()
Specification : MS PLATE OF SIZE 126 + 1.0-0.0 X 126 + 1.0-0.0X 3MM THICK (PHOSPATED) TO SPEC IS : 2062-1994 OF ANY GRADE, CORNER RADIUS 3R. ALL SHARP CORNERS TO BE REMOVED. TESTING TO BE DONE FOR TENSILE & ELONGATION. HEMRL DRG NO 1517- DETL NO. 3
R
Estab
Category : ddp
Grade : 1
Size :
S
1Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) BRASS STRIPS
Description : BRASS STRIPS()
Specification : BRASS STRIP TO SIZE -18+/-0.2MM(W) x 0.7+/-0.01MM(T) TO BS 2870, CZ-106,1/4 HARD. OXIDIZATION, BEND & DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE [PACKING CONDITION - EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CL
R
Estab
2) COPPER STRIP TO SIZE:13+/-0.2MM(W)* 0.35+0.02MM(T)
Description : COPPER STRIP TO SIZE:13+/-0.2MM(W)* 0.35+0.02MM(T)()
Specification : COPPER STRIP TO SIZE -13+/-0.2MM(W) x 0.35+0.02MM(T) DEEP DRAWING QUALITY TO BS 2870,1970, C-102, CONDITION O. OXIDIZATION, BEND& DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE[PACKING CONDITION - EACH ROLL OF STRIP SHOULD BE
R
Estab
Category : p
Grade : 3
Size :
S
3923
S R ENGINEERING ENTERPRISE
SADATPUR, MANASINGHAPUR, HOWRAH 711404 HANTAL BARGACHIA ROAD HOWRAH West Bengal
PIN1 : 711404
Phone No. : 8609039416 GSTIN :
19ABPFS6222A1Z6
Specification : BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.
R
Nonestab
Category : p
Grade : 3
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) COPPER TUBE 35 mm plus min o point 15 mm OD X2 point 5 mm plus minus 0 point 3mm WALL THICKNESS X1 TO 3 MTRS LONG SPECN JSS 4710 01 2007 REV NO 4 GR 1 IN EXTRUDED AND DRAWN CONDN TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN O CONDITION[07]()
Specification : COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERT
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) DRIVING BAND BLANK AS PER CQA DRG NO 155 1030
Description : DRIVING BAND BLANK AS PER CQA DRG NO 155 1030()
Specification : DRIVING BAND BLANK AS PER CQA(A) KIRKEE ASSEMBLY DRAWING NO 155-1030 2439A 11002 AND DESIGNER'S REF NO. 155-1060 DC 36792-A DT. 01-11-01
R
Estab
Category : ddp
Grade : 1
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) DRIVING BAND BLANK AS PER CQA DRG NO 155 1030
Description : DRIVING BAND BLANK AS PER CQA DRG NO 155 1030()
Specification : DRIVING BAND BLANK AS PER CQA(A) KIRKEE ASSEMBLY DRAWING NO 155-1030 2439A 11002 AND DESIGNER'S REF NO. 155-1060 DC 36792-A DT. 01-11-01
R
Estab
2) Driving Band Blank to OFAJ Drg No SM 214 M
Description : Driving Band Blank to OFAJ Drg No SM 214 M()
Specification : AS PER DRAWING
R
Estab
3) Second Driving Band Blank to OFAJ Drg No SM 213 K
Description : Second Driving Band Blank to OFAJ Drg No SM 213 K()
Specification : AS PER OFAJ Drg. No.SM-213 K.
R
Estab
Category : ddp
Grade : 1
Size :
L
1Gun and Shell Factory
Name
Specification
Use
Status
1) COPPER NICKEL TUBE 76point2 MM plus 0 point 5 ID X 7point5MM plus 2 MM THICK TO SPECN BS STA 7 NC 8 AS DRAWN CONDN TEST PIECES OF THE MAT SHOULD BE ANNEALED and CHECKED FOR HARDNESS 50 TO 60 VPN and 180 DEGREE BENT TEST INCLUDING THE OTHERS[07]()
Specification : COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 7.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 AS DRAWN CONDN. TEST PIECES OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECI
Specification : LITHARGE (LEAD MONOXIDE) CONFORMING TO THE FOLLOWING SPECN. A) APPEARANCE: YELLOW POWDER B) LEAD MONOXIDE (PbO) CONTENT : MIN. 96%. C) ALKALINE IMPURITIES AS (CaO): 0.002% MAX. D) GRANULATION: MAX.5.0% RETAINED ON 250 MICROMTER I.S.SIEV
R
Estab
Category : p
Grade : 3
Size :
S
3929
Aroson Plastics Pvt. Ltd.
B-90 Mayapuri Industrial Area Phase-1 Mayapuri Industrial Area Phase-1 New Delhi Delhi
PIN1 : 110064
Phone No. : 28116777 GSTIN :
07AAFCA5152R1Z9
1) Moulds for component 10 gm to 3 kgs of weight[62]()
Specification : "Design, manufacturing, testing & trial and supply of various type of moulds for Annual requirement quantity: 10 moulds (approx.) and weight of components: 10 gm to 3kgs & materials to be moulded, different types of polymer Granules/powde
1) NEATLY DIE FORGED W SHAPE STEEL FORGING TO CAT NO 1294 A HAVING PROPERTIES UTS 37 KG PER MM SQ MIN YIELD STRENGTH 24 KG F PER MM SQ MIN PERCENT ELONGATION 25 PERCENT ON GAUGE LENGTH 5 POINT 65 UNDER ROOT AREA
Description : NEATLY DIE FORGED W SHAPE STEEL FORGING TO CAT NO 1294 A HAVING PROPERTIES UTS 37 KG PER MM SQ MIN YIELD STRENGTH 24 KG F PER MM SQ MIN PERCENT ELONGATION 25 PERCENT ON GAUGE LENGTH 5 POINT 65 UNDER ROOT AREA()
Specification : NEATLY DIE FORGED W SHAPE STEEL FORGING TO CAT NO.1294/A HAVING PROPERTIES UTS 37 KG/MM SQ.(MIN). YIELD STRENGTH 24 KG F/MM SQ.(MIN.)% ELONGATION 25 % ON GAUGE LENGTH 5.65 UNDER ROOT AREA.
R
Estab
Category : ddp
Grade : 1
Size :
S
1Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) FORGING OF HANDLE
Description : FORGING OF HANDLE()
Specification : FORGING FOR T-72 & T-90 OF HANDLE
C
Estab
2) STEEL FORGE OF BRACKET
Description : STEEL FORGE OF BRACKET()
Specification : STEEL( FORGING) OF FIXED BRACKET
C
Estab
3) CONVERSION OF STEEL SQUARE
Description : CONVERSION OF STEEL SQUARE()
Specification : CONVERSION ASSISTANCE FOR CONTROLL ROD MATL OF STEEL SQUARE 125MM TO 80MM
C
Estab
4) STEEL FORGING OF ROD
Description : STEEL FORGING OF ROD()
Specification : STEEL FORGING OF ROD PRG/38/T-49(A)
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Medak
[ENR Registration]
Name
Specification
Use
Status
1) ALUMINIUM FORGING "BODY" TO DRG NO. ASY3-008
Description : ALUMINIUM FORGING "BODY" TO DRG NO. ASY3-008()
1) PIN DIAMETER 20 C11 CAT 1153 PIN DIA 20 X 220 MM LENGTH TO DRG NO IMPD 0985
Description : PIN DIAMETER 20 C11 CAT 1153 PIN DIA 20 X 220 MM LENGTH TO DRG NO IMPD 0985()
Specification : PIN DIAMETER 20 C11 CAT-1153(PIN DIA. 20 X 220 MM LENGTH) TO DRG. NO. IMPD 0985.
C
Estab
Category : ddp
Grade : 1
Size :
S
1Ordnance Factory Kanpur
[ENR Registration]
Name
Specification
Use
Status
1) Forged Proof Machined Blank Heat Treated for Ring as SK-9042/B
Description : Forged Proof Machined Blank Heat Treated for Ring as SK-9042/B()
Specification : As per Drg. No. SK-9042/B
R
Estab
Category : p
Grade : 3
Size :
S
3934
J. POONAMCHAND & SONS
NO.303, CREATIVE INDUSTRIAL CENTRE, 3RD FLOOR N M JOSHI MARG, LOWER PAREL (EAST) MUMBAI MAHARASTRA
PIN1 : 400011
Phone No. : 9322851474
1) PIN DIAMETER 20 C11 CAT 1153 PIN DIA 20 X 220 MM LENGTH TO DRG NO IMPD 0985
Description : PIN DIAMETER 20 C11 CAT 1153 PIN DIA 20 X 220 MM LENGTH TO DRG NO IMPD 0985()
Specification : PIN DIAMETER 20 C11 CAT-1153(PIN DIA. 20 X 220 MM LENGTH) TO DRG. NO. IMPD 0985.
