DRAWING NO. ADRDE/1402-03-003

DRAWING NO. ADRDE/1402-03-003

ADRDE/1402-05

DRG. NO. ADRDE/ 1402-05

DRG. NO. ADRDE/ 1402-05

AS PER SPECIFICATION

DRG. NO.ADRDE/1402-08

DRG. NO.ADRDE/1402-08

AS PER SPECIFICATION

AS PER PARTICULARS THICKNESS=2.00 +0.01MM.-0.00MM DENSITY-0.025+-0.002MM

AS PER REQUIREMENT & SPECIFICATION

SPECIFICATION : IS:9827-1981

AS PER SPECIFICATION

SPECN. NO. ADRDE/1283/A1(a),SHEET NO.19 of 80

NIV RIP CORD HANDLE FOR PTA-R WITH DOUBLE STOPPER BALL

CQA(GS)/US/564

• As per specification/drawing

• As per specification/drawing

NIV PACK OPENING SPRING ELASTIC EYE

NIV PACK OPENING SPRING ELASTIC EYE

• AS PER DRAWING/SPECIFICATION

• AS PER DRAWING/SPECIFICATION

SPECN-ADRDE/PAS/2004/01(a)

SPECN-ADRDE/PAS/2004/01(a)

NIV STIFFENER FOR RIP CORD PROTECTION FLAP PTA R

NIV STIFFENER FOR RIP CORD PROTECTION FLAP PTA R

• AS PER DRAWING/SPECIFICATION

• AS PER DRAWING/SPECIFICATION

NIV GROMMET 8MM WITH WASHER STAINLESS STEEL

DRAWING NO. CQA(GS)/US/561

• As Per Specification/Drawing

• As Per Specification/Drawing

DRAWING NO. CQA(GS)/US/559

DRAWING NO. CQA(GS)/US/559

• As per Drawing/Specification

• As per Drawing/Specification

As per Specification

SPCN.NO.IND/GS/1826(a)

PACK OPENING SPRING ELASTIC 89 MM

ADRDE/781(d)EXCEPT FOR LENGTH

• As per Specification/Drawing

• As per Specification/Drawing

PACK OPENING SPRING ELASTIC 203 MM

ADRDE/781(d)EXCEPT FOR LENGTH

ADRDE/781(d)

• As per Specification/Drawing

• As per Specification/Drawing

SPECN/DRG.NO: ADRDE/302(c).

SPECN/DRG.NO: ADRDE/302(c).

AS PER SPECIFICATION

DRG.NO.ADRDE/1355.

FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.

SPECIFICATION NO. : ADRDE/SPECN/1982/7(c) sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S.

LINK HAMMER TO DS CAT NO. 3040-003489 (LTDC 26826-SA DATED 06.05.2016) (MACTROTECH TEST TO ASTME 381-1984 WILL BE AS PER COL. (C) OF SL. NO. 1 OF CQA (SA) NOTE SHEET NO. 1) AND (NMIR TEST TO IS: 4163 WILL BE AS PER COL. (C) OF SL. NO. 3 OF CQA (SA) NOTE SHEET NO. 1 FOR PISTOL AUTO 9MM 1A.

LINK HAMMER TO DS CAT NO. 3040-003489 (LTDC 26826-SA DATED 06.05.2016) (MACTROTECH TEST TO ASTME 381-1984 WILL BE AS PER COL. (C) OF SL. NO. 1 OF CQA (SA) NOTE SHEET NO. 1) AND (NMIR TEST TO IS: 4163 WILL BE AS PER COL. (C) OF SL. NO. 3 OF CQA (SA) NOTE SHEET NO. 1 FOR PISTOL AUTO 9MM 1A.

DS CAT NO. 3040-003489 (LTDC 26826-SA DATED 06.05.2016)

MAGAZINE ASSEMBLY TO DS CAT NO.1005-003190 (LT.DC-24648-SADT.1-3-2000) CONSISTING OF:1)1005-003191(LT.DC-26970-SA)2)1005-003192(LT. DC-26821-SA)(3)CISA 640(LT. DC-26822-SA)4)5360-042525(LT.DC-26820-SA) FOR PISTOL AUTO 9MM 1A

MAGAZINE ASSEMBLY TO DS CAT NO.1005-003190 (LT.DC-24648-SADT.1-3-2000) CONSISTING OF:1)1005-003191(LT.DC-26970-SA)2)1005-003192(LT. DC-26821-SA)(3)CISA 640(LT. DC-26822-SA)4)5360-042525(LT.DC-26820-SA) FOR PISTOL AUTO 9MM 1A

DS CAT NO.1005-003190 (LT.DC-24648-SADT.1-3-2000) CONSISTING OF:1)1005-003191(LT.DC-26970-SA)2)1005-003192(LT. DC-26821-SA)(3)CISA 640(LT. DC-26822-SA)4)5360-042525(LT.DC-26820-SA)

ARM SEAR CONNECTING TO DS CAT.NO.1005-003196(DC-26816-SA DT.16-4-2016)(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PERCOL.(C) OF SL.NO.1 OF CQA(SA) NOTE SHEET NO.1)&(NMIR TEST TOIS : 4163 WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTESHEET NO.1). FOR PISTOL AUTO 9MM.1A

ARM SEAR CONNECTING TO DS CAT.NO.1005-003196(DC-26816-SA DT.16-4-2016)(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PERCOL.(C) OF SL.NO.1 OF CQA(SA) NOTE SHEET NO.1)&(NMIR TEST TOIS : 4163 WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTESHEET NO.1). FOR PISTOL AUTO 9MM.1A

DS CAT.NO.1005-003196

PACK OPENING SPRING ELASTIC 440 MM

SPECIFICATION NO:- IND/GS/1827(a) EXCEPT LENGTH.

• As per Specification/drawing

• As per Specification/drawing

PACK OPENING SPRING ELASTIC SHORT 370 MM

SPECIFICATION NO.IND/GS/1827(a) EXCEPT LENGTH.

• As per Specification/drawing

• As per Specification/drawing

NIV PACK FRAME

DRAWING NO.CQA(GS)/US/557 except that :- Drg sheet No. 2 of 3 Dtd :24.04.2019

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

SPCN.NO.IND/GS/1815 (b)

SPCN.NO.IND/GS/1815 (b)

Sub-Assy of Spring for Auxiliary Spring PTA-R Parachute

CQA(GS)/US/563

• AS PER SPECIFICATION

• AS PER SPECIFICATION

SPECN. NO.ADRDE/1106-A-4-(a) (SHEET NO. 22)

SPECN. NO.ADRDE/1106-A-4-(a) (SHEET NO. 22)

SPEPCN/DRG. NO. Drg.no.ADRDE/1460-03-04 AND AS PER PARTICULARS

SPEPCN/DRG. NO. Drg.no.ADRDE/1460-03-04 AND AS PER PARTICULARS

AS PER SPECIFICATION

SPECN/DRG.NO. Drg. no.ADRDE/1460-03-04 And as per particulars

SNAP HOOK STATIC LINE PTR-M WITH SAFETY PIN

DRAWING NO JSS: 5340-05:2014

DRAWING NO JSS: 5340-05:2014

• As per Drawing/Specification

• As per Drawing/Specification

CANOPY RELEASE ASSEMBLY WITH WIRE LOOP

DRAWING NO. ADRDE/1233(a)

DRAWING NO. ADRDE/1233(a)

• As per Drawing/Specification

• As per Drawing/Specification

METALLIC SLIDE FASTENER HEAVY DUTY 457M LONG OG

SPECH. NO.: IS : 3148

SPCN.NO.ADRDE/1210(b)

SPCN.NO.ADRDE/1210(b)

NIV TRIANGULAR D RING

DRAWING NO. CQA(GS)/US/560

• AS PER SPECIFICATION

• AS PER SPECIFICATION

AS PER SPECIFICATION

DRAWING NO. CQA(GS)/US/562

CANOPY RIGGING LINK DETACHABLE PTR M DS CAT NO 1670 000320

CANOPY RIGGING LINK DETACHABLE PTR M DS CAT NO 1670 000320

• As per Drawing/Specification

• As per Drawing/Specification

SPECN.NO.IND/GS/1802

SPECN.NO.IND/GS/1802

SPECN.NO.IND/GS/1795

SPECN.NO.IND/GS/1795

SPECN.NO.IND/GS/1798

SPECN.NO.IND/GS/1798

SPECIFICATION NO. IS:7933-1975.

SPECIFICATION NO. IS:7933-1975.

SPECIFICATION NO. JSS:1670-03-2011(REV NO.2 )

SPECIFICATION NO. JSS:1670-03-2011(REV NO.2 )

NYLON SEWING THREAD BLACK, VARIETY NO. L 2

IS: 4229-2003

NYLON SEWING THREAD BLACK, VARIETY NO. H 1

IS: 4229-2003

Sodium Formate

STS But purity should not be less than 95% material shall be white crystal/ powder of sodium formate free from visible impurities

Sodium Bi Carbonate

IS: 2124-1974

HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF & COUNTER STIFFNER

AS PER APPENDIX'E'&'F'OF IND/TC/3838(K)

CORRUGATED BOX 3 PLY (DULY PRINTED)FOR HIGH ANKLE BOOT DVS AS PER DRG. NO.SK-1174A SIZE 365X335X125MM

IS:2771 (Part-1):1990 Reaffirmed 2002 will be followed for

ALO RESIN ABRASIVE CLOTH OF 50 MTRS. ROLL, SIZE 38MM WIDE GRIT NO. 36(ZIRCON)

IS:715-1976

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "0" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/SQMM, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

AS PER SPECIFICATION

ADRDE/SPECN/1992/35.

AS PER SPECIFICATION

SPECN-ADRDE/QMS/TDTM/C-2010/04

AS PER SPECIFICATION

SPECN-ADRDE/SPECN/1985/25

AS PER SPECIFICATION

SPECN-ADRDE/SPECN/1992/35

AS PER SPECIFICATION

SPECN-ADRDE/SPECN/1992/36 (TYPE-I)

CORD COTTON BS 60 KG U/D

ADRDE/SPECN/1992/36 (TYPE-IV)

• As per Specification/Drawing

• As per Specification/Drawing

AS PER SPECIFICATION

SPECN-ADRDE/SPECN/1992/36(TYPE-II)

CORD COTTON BS 20 KG U/D

SPECN- IS: 1402 Except That :- (i) plaits/dm 75 +/- 5 (ii) Linear Density (Tex) - 1240 max

• As Per Specification/Drawing

• As Per Specification/Drawing

AS PER SPECIFICATION

SPECN-ADRDE/SPECN/1992/36 TYPE-V

AS PER SPECIFICATION

Specification No. : IS : 5175-1992.

AS PER SPECIFICATION

SPECIFICATION NO. : JSS - 4020 - 8 EXCEPT THAT IN APPEARANCE

AS PER SPECIFICATION

SPECIFICATION NO: IND/ENG/PROV/1222.

CORD NYLON BRAIDED UNDYED 345 N CORELESS

SPECN.NO.: ADRDE/SPECN/1987/31. appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, Kanpur. Sampling plan and criteria of conformity. As per anexure 11 (TC-8).

• As Per Specification/Drawing

• As Per Specification/Drawing

AS PER SPECIFICATION

SPECN. NO. ADRDE/QAC/TECH PART/05/01

AS PER SPECIFICATION

SPECN-IS:4227(VARIETY NO.-11_)

AS PER SPECIFICATION

SPECIFICATION NO.: IS :4227-1981 VARIETY NO 4(b)

AS PER SPECIFICATION

IN ROLL LENGTH OF 100 MTS. SPECIFICATION:IS:4227-1967

CORDAGE NYLON 1200 LBS UD (BS-544 KG)

SPECIFICATION - JSS:4020-9:1999 (REV-1)

• As per drawing/Specification

• As per drawing/Specification

AS PER SPECIFICATION

SPECIFICATION:- NO.OF SPINDLE----36 NO.OF ENDS-------36 NO.OF CORE------- 8 WT./100 MTR------1100 GM (APPROX) NO.OF PLAITS/dm--50 TEX OF YARN:-SHEATH- 90.9X2 -CORE -100.9X3 BS.---------450 KG ELONGATION % ---30 (APPROX) CONSTRUCTION----BRAIDED

AS PER SPECIFICATION

SPECIFICATION :- NO.OF SPINDLES----------------16 NO. OF ENDS-------------------16 NO.OF PLAITS/dm------------36/37 WEIGHT/Mtr.----------------8.5 gms.(MAX). TEX OF YARN----------------93.4 X 4 B.S. IN NEWTON-------------3600-N (MIN).

CORDAGE NYLON BS-1800 N OLIVE GREEN

SPECIFICATION :- NO.OF SPINDLES------------16 NO.OF ENDS----------------32 NO.OF PLAITS-------------45/56 NO.OF CORES----------------2 TEX OF YARN--SEATH = 96.5 X 1 --CORE = 96.5 X 4 B.S. IN NEWTON (15 Cms.BETWEEN GRILLS)--1800-N(MIN) TYPE-----------------BRAIDED. MASS/100 M (In Gms.)------475 (MAX).

CORDAGE NYLON BS-1800 N U/D

SPECIFICATION :- NO.OF SPINDLES-------------------16 NO.OF ENDS-----------------------16 NO.OF PLAITS--------------------- NO.OF CORES-----------------------2 TEX OF YARN---SEATH=91.5 X 2 CORE =91.4 (2 x 2) B.S.IN NEWTON(15 Cms.BETWEEN GRILLS)-----1800-N(MIN) TYPE-------------------------BRAIDED. MASS/100 M (IN gms.)----------475 MAX.

CORDAGE NY. 66, BRAIDED 2940 N U/D

Specification No. ADRDE/SPECN/71(a) Except that : The revised linear density of Warp yarn will be Type I-840x4 & Type II-840x2 or Type I-1680x2 & Type II-1680x1.

• As per Specification/Drawing

• As per Specification/Drawing
• As per Specification/Drawing

CORDAGE NYLON CORELESS BRAIDED BS=250-300 kg U/D

Spcn. As Per :- 1. SPINDLE -16 2. END -48 3. DENIER -480 4. LENGTH/KG-175 M (Min). 5. PLAITS/dm-37/38.

CORDAGE NYLON BRAIDED 318 KG

SPCN. NO:IS:4227-1980 EXCEPT MASS/ METRES NOT TO EXCEED 8GM.

CORDAGE NYLON CORELESS ( 250 KG )

SPECIFICATION: Braking Strength - 250kg (Minimum) No. of Spindle - 16 No of End - 48 Plaits/DM - 37/48 Denier - 840 Length/kg - 175m (Minimum)

CORDAGE NYLON BRAIDED BS:318 KGS U/D

SPECN-IS:4227-1981.

CORDAGE NYLON BRAIDED CORELESS 66, BS 110 kgf U/D

Mass,g/100m max. 270 IS:7071:1989 Pt.-2 B.S.,kgf grip dis:15cm Min 110 IS:7071:1986 Pt.-4 Extension at break,% 25+/-5 IS:7071:1986Pt.4 No. of spindles 16 IS:7071:1989 Pt.1to 3 No. of sheath Threads 32 IS:7071:1989 Pt.1to 3 noninal Yarn Denier x ply 210 x 3 IS:3442-1980 TPM 200+/-10% IS:832-1985 No. of Plaits/dm 50+/-5 IS:4227-1998 pH value 5 TO 5.5 IS:1390-1983 COLD MD Material-bright,high tenacity,multifilament,ind. gr. heat&UV stablilized Ny.66 yarn IS:5762.Appendix B ADRDE/SPEC/2000/55

CORD ELASTIC 5MM U/D

AS PER SPCN.NO.ADRDE/SPCN/1980/3.

CORDAGE NYLON BRAIDED U/D BS 110 KG

1- NO OF SPINDLES ----16 ----VISUAL/COUNTING 2-NO.OF ENDS ----48 ---VISUAL/COUNTING 3-NO.OF PLAITS/dm -----45/46 ----IS:7071(pt 3) 4-MASS/M in gm ----2.8 ----IS:7071(pt 2) 5-TEX OF YARN ----15.7X3 6-BS IN KGS 110(min) ----IS:3442(pt 4) (15 CM bet"grips) 7-CONSTRUCTION -----BRAIDED ----VISUAL

CORDAGE NYLON BRAID. 250 KG U/D

Spcns. NUMBER OF SPINDLES=16;NUMBER OF ENDS=32NUMBER OF PLAITS/DM=38-44;NUMBER OF CORE THREADS=3 WEIGHT/M IN GMS=6.3 MAX.TEX OF YARN SHEATH=16.7X3X3 CORE =16.7X6X3 BREAKING LOAD IN KG (15CM BETWEEN GRIP)= 250 KG (MIN) PERCENTAGE ELONGATION AT BREAK=26 TO 28;WEAVE=BRAIDED TWIST PER MTR.(TPM) 300+-20(SINGLE) 270+-20(PLY) 250+-20(CABLE