STRIKER SLEEVE TO CQA (AMMN) DRG. NO.3-016919 DET-12,DC-37284-A DT. 06.07.11

STRIKER SLEEVE TO CQA(AMMN) DRG.NO.3-016919 DET-12,DC-37284-A DT.06.07.11

ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006 GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE: 12 +/- 0.1 MM DIA WITHOUT PGG.

ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006 GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE: 12 +/- 0.1 MM DIA WITHOUT PGG.

STOPPER STUD TO CQA (A) DRG.NO.3-016919 DET-33, DC-37284-ADT.06.07.11

STOPPER STUD TO CQA (A) DRG.NO.3-016919 DET-33, DC-37284-ADT.06.07.11

MILD STEEL WIRE TO SPECN. BS:1052(1980 ISSUE)MILD DRAWN BRIGHT WITH UTS OF 40 KG PER MM SQ.(392 MPA)MIN.IN COIL FORM,SIZE:- 3.45 + 0.01/ - 0.05 MM DIA.

MILD STEEL WIRE TO SPECN. BS:1052(1980 ISSUE)MILD DRAWN BRIGHT WITH UTS OF 40 KG PER MM SQ.(392 MPA)MIN.IN COIL FORM,SIZE:- 3.45 + 0.01/ - 0.05 MM DIA.

STRIKER HEAD TO CQA AMMN DRG.NO.3-016919 DET-9DC-37284-A DT.06.07.11

STRIKER HEAD TO CQA AMMN DRG.NO.3-016919 DET-9DC-37284-A DT.06.07.11

ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3METRES, SIZE: 14.5 +/- 0.1 MM DIA WITHOUT PGG.

ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3METRES, SIZE: 14.5 +/- 0.1 MM DIA WITHOUT PGG.

COPPER WIRE TO BS EN:12166-1968 MATERIAL SYMBOL CU-DHP NUMBER CW 024A CONDITION R200 WITH UTS 240N/MM2 (MIN) IN COIL FORM SIZE: 0.7 -0.03 MM DIA.

COPPER WIRE TO BS EN:12166-1968 MATERIAL SYMBOL CU-DHP NUMBER CW 024A CONDITION R200 WITH UTS 240N/MM2 (MIN) IN COIL FORM SIZE: 0.7 -0.03 MM DIA.

PIN (ALUMINIUM) TO DRG.NO.3-016919 DET-45 DC-37284-ADT.06-07-11

PIN (ALUMINIUM) TO DRG.NO.3-016919 DET-45 DC-37284-ADT.06-07-11

ALUMINIUM ALLOY ROUND TO SPECN BS:1474-1987 GRADE 2014A, CONDITION TB, HAVING STRAIGHT LENGTH OF3 TO 4 MTRS SIZE: 4.5 +0.025/ -0.075 MM DIA WITHOUTPERIPHERAL GRAIN GROWTH.

ALUMINIUM ALLOY ROUND TO SPECN BS:1474-1987 GRADE 2014A, CONDITION TB, HAVING STRAIGHT LENGTH OF3 TO 4 MTRS SIZE: 4.5 +0.025/ -0.075 MM DIA WITHOUTPERIPHERAL GRAIN GROWTH.

SLEEVE FOR PART NO.36 TO CQA (A) DRG. NO.3-016919 DETAIL-37DC.37284 06.07.2011

SLEEVE FOR PART NO.36 TO CQA (A) DRG. NO.3-016919 DETAIL-37DC.37284 06.07.2011

BRASS ROUNDS SPECN.BSEN:12166-1998 MATERIAL SYMBOL CUZN40PB2NUMBER CW 617N CONDITION R410 HAVING STRAIGHT LENGTH OF 1.5-2 MTRS SIZE: 9.5 -0.036 MM DIA HAVING STRAIGHTNESS LESS THANOR EQUAL TO 0.3 MM/MTR

BRASS ROUNDS SPECN.BSEN:12166-1998 MATERIAL SYMBOL CUZN40PB2NUMBER CW 617N CONDITION R410 HAVING STRAIGHT LENGTH OF 1.5-2 MTRS SIZE: 9.5 -0.036 MM DIA HAVING STRAIGHTNESS LESS THANOR EQUAL TO 0.3 MM/MTR

SETTING SCREW TO CQA(AMMN) DRG. N0.3-016919 DETAIL NO.36

SETTING SCREW TO CQA(AMMN) DRG. N0.3-016919 DETAIL NO.36

LEADED BRASS ROUND TO SPECN.BSEN:12166-1998 MATERIAL SYMBOLCuZn40Pb2 NUMBER CW 617N CONDITION R 410 HAVING STRIGHT LENGTH OF 2 TO 3 METRES. SIZE:8.5 +/- 0.05 MM DIA

LEADED BRASS ROUND TO SPECN.BSEN:12166-1998 MATERIAL SYMBOLCuZn40Pb2 NUMBER CW 617N CONDITION R 410 HAVING STRIGHT LENGTH OF 2 TO 3 METRES. SIZE:8.5 +/- 0.05 MM DIA

SCREW TO CQA(A)DRG.NO.3-016919 DET-32 DC-37284-A DT.6.7.11

SCREW TO CQA(A)DRG.NO.3-016919 DET-32 DC-37284-A DT.6.7.11

BRASS ROUND TO SPECN.BS EN: 12166-1998 MATERIAL SYMBOLCUZN40PB2 NO CW 617N CONDITION R430 HAVING STRAIGHT LENGTHOF 1.5-3 MTRS WITH MIN.UTS OF 441 TO 637 MPA SIZE:4.00-0.03MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

BRASS ROUND TO SPECN.BS EN: 12166-1998 MATERIAL SYMBOLCUZN40PB2 NO CW 617N CONDITION R430 HAVING STRAIGHT LENGTHOF 1.5-3 MTRS WITH MIN.UTS OF 441 TO 637 MPA SIZE:4.00-0.03MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

STEEL STRIP TO SPECN. BS:1449 PT.I -1983 SECTION 2 GRADE CS-3 OR CS-4 IN BRIGHT FINISHED CONDITION IN ROLL FORM, SIZE:-29.00+/-0.25 MM WIDE X 0.12 - 0.02 MM THICK(38 BG)

STEEL STRIP TO SPECN. BS:1449 PT.I -1983 SECTION 2 GRADE CS-3 OR CS-4 IN BRIGHT FINISHED CONDITION IN ROLL FORM, SIZE:-29.00+/-0.25 MM WIDE X 0.12 - 0.02 MM THICK(38 BG)

STRIKER COVER TO CQA(A) DRG.NO.3-016919 DET-8 DC-37284-A DT.06.07.2011.

STRIKER COVER TO CQA(A) DRG.NO.3-016919 DET-8 DC-37284-A DT.06.07.2011.

HARDENED & TEMPERED CARBON STEEL STRIP TO SPECN IS 2507-1975(REAFFIRMED 2005) GRADE 4,DESIGN 70 C 6 OR DESIGN.80 C 6WITH UTS 150 TO 180KGF/MM2 & 180 DEG.BEND TEST CRITERIA OVERA RADIUS OF 2MM.SIZE.0.32 + 0.02/-0.01 THICK,3.00 + 0.05/-0.15 MM WIDE

HARDENED & TEMPERED CARBON STEEL STRIP TO SPECN IS 2507-1975(REAFFIRMED 2005) GRADE 4,DESIGN 70 C 6 OR DESIGN.80 C 6WITH UTS 150 TO 180KGF/MM2 & 180 DEG.BEND TEST CRITERIA OVERA RADIUS OF 2MM.SIZE.0.32 + 0.02/-0.01 THICK,3.00 + 0.05/-0.15 MM WIDE

ROTOR SPRING TO CQA (AMMN) DRG. NO. 3-016919 DET.-14 DC(I)37284- A DT. 6.7.2011 (WIDTH OF STEEL STRIP TO BE RESTRICTED TO 3.00 - 0.15 MM)

ROTOR SPRING TO CQA (AMMN) DRG. NO. 3-016919 DET.-14 DC(I)37284- A DT. 6.7.2011 (WIDTH OF STEEL STRIP TO BE RESTRICTEDTO 3.00 - 0.15 MM)

• As per attachment

• As per attachment

BALL FOR ROTOR MECHANISM TO CQA (AMMN) DRG. NO. IQX-896 DC 37284-A DT. 06.07.2011 (6333490103)

BALL FOR ROTOR MECHANISM TO CQA (AMMN) DRG. NO. IQX-896 DC 37284-A DT. 06.07.2011

IQX-896 DC 37284-A DT. 06.07.2011

• As per Drg & spec.

• As per Drg & spec.

BALL FOR STRIKER MECHANISM TO CQA (AMMN) DRG.NO. IQX-895DC 37294-A DT. 16-12-2011 (6333490104)

BALL FOR STRIKER MECHANISM TO CQA (AMMN) DRG.NO. IQX-895DC 37294-A DT. 16-12-2011

IQX-895DC 37294-A DT. 16-12-2011

• As per Spec & Drawing

• As per Spec & Drawing

STRIKER PIN TO CQA (AMMN) DRG. NO. 3-016919 DET-10 DC-37284-A DT.06.7.2011.

STRIKER PIN TO CQA (AMMN) DRG. NO. 3-016919 DET-10 DC-37284-A DT.06.7.2011.

CARBON STEEL GROUND BAR GRADE 080M50 TO SPECN. BS:970 PT-1-1983 IN COLD DRAWN FROM NORMALISED CONDITION OR GRADE 080M40IN COLD DRAWN OR HEAT TREATED TO "R" CONDITION IN STRAIGHTLENGTH OF 1.5 TO 2 MTR.SIZE:5.5 -0.03 MM DIA.HAVING STRAIGHT-NESS LESS THAN OR EQUAL TO 0.3 MM/MTR

CARBON STEEL GROUND BAR GRADE 080M50 TO SPECN. BS:970 PT-1-1983 IN COLD DRAWN FROM NORMALISED CONDITION OR GRADE 080M40IN COLD DRAWN OR HEAT TREATED TO "R" CONDITION IN STRAIGHTLENGTH OF 1.5 TO 2 MTR.SIZE:5.5 -0.03 MM DIA.HAVING STRAIGHT-NESS LESS THAN OR EQUAL TO 0.3 MM/MTR

SEALING RING TO CQA (AMMN)DRG.NO.3-016919 DET-35 DC(I)36861-A DT.30.10.2002 ITEM CODE 6333490102

SEALING RING TO CQA (AMMN)DRG.NO.3-016919 DET-35 DC(I)36861-A DT.30.10.2002

3-016919 DET -35

• AS PER DRG

• AS PER DRG

SEALING RING TO CQA(AMMN) DRG.NO.3-016919 DET.4 DC(I)36861-A DT.30.10.2002

SEALING RING TO CQA(AMMN) DRG.NO.3-016919 DET.4 DC(I)36861-A DT.30.10.2002

MAGAZINE COVER TO CQA (A) DRG. NO.3-016919 DET-24DC-37284-A DT.6.7.2011

MAGAZINE COVER TO CQA (A) DRG. NO.3-016919 DET-24DC-37284-A DT.6.7.2011

WASHER FOR PART NO.25 TO CQA (AMMN.) DRG.NO. 3-016919 DETAIL50 DC(1) 37284-A Dt.6.7.2011

WASHER FOR PART NO.25 TO CQA (AMMN.) DRG.NO. 3-016919 DETAIL50 DC(1) 37284-A Dt.6.7.2011

BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUND BARS TO SPECNBS:970-PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES(10% MAX SHORTS DOWN TO 1.5 METRES PERMITTED)SIZE 32.50 - 0.1 MM DIA.

BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUND BARS TO SPECNBS:970-PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES(10% MAX SHORTS DOWN TO 1.5 METRES PERMITTED)SIZE 32.50 - 0.1 MM DIA.

LOCKING NUT TO CQA(A)DRG.N O. 3-016919 DET-55DC-37284-A DT.06.7.2011

LOCKING NUT TO CQA(A)DRG.N O. 3-016919 DET-55DC-37284-A DT.06.7.2011

• As per DRG

• As per DRG

MAGAZINE TO OFAJ DRG.NO. FS-2635 B.

MAGAZINE TO OFAJ DRG.NO. FS-2635 B.

LEATHER WASHER TO CQA(AMMN.) DRG. NO. 3-016919 DETAIL-51DC(I) 36154-A DT. 17.8.96. WITHOUT APC TREATMENT (2102884305)

LEATHER WASHER TO CQA(AMMN.) DRG. NO. 3-016919 DETAIL-51DC(I) 36154-A DT. 17.8.96. WITHOUT APC TREATMENT

• As per Spec & Drawing

• As per Spec & Drawing

WASHER FOR PART NO.36 TO CQA(AMMN.) DRG. NO.3-016919 DETAIL22 DC(I) 37284-A DT.6.7.11 (WITHOUT SURFACE TREATMENT)

WASHER FOR PART NO.36 TO CQA(AMMN.) DRG. NO.3-016919 DETAIL22 DC(I) 37284-A DT.6.7.11 (WITHOUT SURFACE TREATMENT)

WASHER FOR PART NO.36 TO CQA(AMMN.) DRG. NO. 3-016919 DETAIL38 DC(I) 37284-A DT.06.07.2011.

WASHER FOR PART NO.36 TO CQA(AMMN.) DRG. NO. 3-016919 DETAIL38 DC(I) 37284-A DT.06.07.2011.

STEEL SHEET 2 X1250X2500

STEEL SHEET 2 X1250X2500

STEEL SHEET 1.5 X1250X2500

STEEL SHEET 1.5 X1250X2500

STEEL ROUND BAR 38mm DIA. & STEEL GR. 20X2H4A;GOST 4543-71 WITH LENGTH 3000mm (MINIMUM) OR ANY STD. LENGTH REQUIRED FOR PLANET PINION SPINDLE OF 4th PLANETARY GEAR SET TO DRG.No.432.40.032-1

STEEL ROUND BAR 38mm DIA. & STEEL GR. 20X2H4A;GOST 4543-71 WITH LENGTH 3000mm (MINIMUM) OR ANY STD. LENGTH REQUIRED FOR PLANET PINION SPINDLE OF 4th PLANETARY GEAR SET TO DRG.No.432.40.032-1

FORGING FOR SLIDING DOG CLUTCH DRG. NO. PS 1631011(R2)

FORGING FOR SLIDING DOG CLUTCH DRG. NO. PS 1631011(R2)

DRG. NO. PS 1631011(R2)

FORGING FOR BUSHING OUTER TO DRG. NO. 172.2M.52.005/F, STEEL 20X2H4A GOST 4543-71

FORGING FOR BUSHING OUTER TO DRG. NO. 172.2M.52.005/F, STEEL 20X2H4A GOST 4543-71

DRG. NO. 172.2M.52.005/F

FORGING FOR OD SELECTOR PLATE STALLION BS-III VEHICLE, DRG. NO. FF200114-3

FORGING FOR OD SELECTOR PLATE STALLION BS-III VEHICLE, DRG. NO. FF200114-3

DRG. NO. FF200114-3

FORG.FOR INPUT SHAFT STLN- BS-III, PART NO. DRG.NO. F3311611-3

FORG.FOR INPUT SHAFT STLN- BS-III, PART NO. DRG.NO. F3311611-3

DRG.NO. F3311611-3

FORGING FOR OD GEAR ON MAIN SHAFT, STLN-BS-III, PART NO. F1609911, DRG.NO.F8A04711-3

FORGING FOR OD GEAR ON MAIN SHAFT, STLN-BS-III, PART NO. F1609911, DRG.NO.F8A04711-3

DRG.NO.F8A04711-3

FORG.FOR 4th GEAR ON MAIN SHAFT, STLN- BS-III,PART NO./DRG.NO.F1668911-3

FORG.FOR 4th GEAR ON MAIN SHAFT, STLN- BS-III,PART NO./DRG.NO.F1668911-3

DRG.NO.F1668911-3

FORGING FOR 3rd GEAR ON MAIN SHAFT, STLN- BS-III, PART NO. F1668811-3

FORGING FOR 3rd GEAR ON MAIN SHAFT, STLN- BS-III, PART NO. F1668811-3

DRG. NO. F1668811-3

FORGING FOR 2nd GEAR ON MAIN SHAFT, STLN- BS-III, PART NO. F1609711-3

FORGING FOR 2nd GEAR ON MAIN SHAFT, STLN- BS-III, PART NO. F1609711-3

DRG. NO. F1609711-3

FORGING FOR NEEDLE HOUSING, DRG. No. D 9045415 -3A 0384F

FORGING FOR NEEDLE HOUSING, DRG. No. D 9045415 -3A 0384F

DRG. No. D 9045415 -3A

FORGING FOR NEEDLE HOUSING, DRG. No. D 9045315-3(R1)

FORGING FOR NEEDLE HOUSING, DRG. No. D 9045315-3(R1)

DRG. No. D 9045315-3(R1)

FORG. FOR LAY SHAFT STLN- BS-III, PT.NO. F3320011-3

FORG. FOR LAY SHAFT STLN- BS-III, PT.NO. F3320011-3

DRG. NO. F3320011-3

"DIAPHRAGM"TO OFAJ DRG.NO.FS-2467 A (FOR FUZE M842 FOR AMMN. 20 MM AMR HEI.)

"DIAPHRAGM"TO OFAJ DRG.NO.FS-2467 A (FOR FUZE M842 FOR AMMN. 20 MM AMR HEI.)

"ROTOR HOLDER" TO OFAJ DRG.NO. FS-2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI

"ROTOR HOLDER" TO OFAJ DRG.NO. FS-2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI

"ROTOR HOLDER"TO OFAJ DRG.NO.FS-2473 B FOR FUZE M842 AMMN. 20 MM AMR HEI.

"ROTOR HOLDER"TO OFAJ DRG.NO.FS-2473 B FOR FUZE M842 AMMN. 20 MM AMR HEI.

DRG. NO. FS-2473 B

SAFETY LOCK TO OFAJ DRG.NO. FS-2479 A FOR FUZE M859 20MM AM R SAPHEI AMMN.

SAFETY LOCK TO OFAJ DRG.NO. FS-2479 A FOR FUZE M859 20MM AM R SAPHEI AMMN.

SAFETY LOCK TO OFAJ DRG. NO. FS-2468A FOR FUZE M842 FOR AMMN.20MM AMR HEI.

SAFETY LOCK TO OFAJ DRG. NO. FS-2468A FOR FUZE M842 FOR AMMN.20MM AMR HEI.

STEEL ROUND TO SPECN: BS-970 PART-3 :1991 GRADE 430S17 COLD DRAWN SIZE 8.00+1.00 MM DIA.

STEEL ROUND TO SPECN: BS-970 PART-3 :1991 GRADE 430S17 COLD DRAWN SIZE 8.00+1.00 MM DIA.

MAGAZINE TUBE TO OFAJ DRG.NO.FS-2487B FOR FUZE M859 FOR AMMN.20MM AMR SAPHEI.

MAGAZINE TUBE TO OFAJ DRG.NO.FS-2487B FOR FUZE M859 FOR AMMN.20MM AMR SAPHEI.

MAGAZINE TUBE TO OFAJ DRG.NO.FS-2475B FOR FUZE M842 FOR AMMN.20MM AMR HEI.

MAGAZINE TUBE TO OFAJ DRG.NO.FS-2475B FOR FUZE M842 FOR AMMN.20MM AMR HEI.

STAINLESS STEEL STRIP TO SPECIFICATION EN 10088-2, 1.4301,2H +C1000,SIZE:0.15 MM THICK X 2.0+0.05 MM WIDE X 35 MM LONG

STAINLESS STEEL STRIP TO SPECIFICATION EN 10088-2, 1.4301,2H +C1000,SIZE:0.15 MM THICK X 2.0+0.05 MM WIDE X 35 MM LONG

"ROTOR SPIRAL"TO OFAJ DRG.NO.FS-2483 A FOR FUZE M859 AMMN. 20MM AMR SAPHEI

"ROTOR SPIRAL"TO OFAJ DRG.NO.FS-2483 A FOR FUZE M859 AMMN. 20MM AMR SAPHEI

"ROTOR SPIRAL"TO OFAJ DRG.NO. FS-2471 A (FOR FUZE M842 FOR AMMN .20MM AMR HEI.)

"ROTOR SPIRAL"TO OFAJ DRG.NO. FS-2471 A (FOR FUZE M842 FOR AMMN .20MM AMR HEI.)

BRASS STRIP TO SPECN.BS 2870-1980 GR.CZ107 IN 'H' CONDITION TO SIZE 0.05 MM THICK X 1.75/1.73 MM WIDE X 380 MM (APPROX) LONG.

BRASS STRIP TO SPECN.BS 2870-1980 GR.CZ107 IN 'H' CONDITION TO SIZE 0.05 MM THICK X 1.75/1.73 MM WIDE X 380 MM (APPROX) LONG.

" SPIRAL " (BRASS) TO OFAJ DRG. NO. FS-2480B FOR FUZE M859 AMMN.20MM AMR SAPHEI

" SPIRAL " (BRASS) TO OFAJ DRG. NO. FS-2480B FOR FUZE M859 AMMN.20MM AMR SAPHEI

"SPIRAL" TO OFAJ DRG.NO. FS-2469B FOR FUZE M842 FOR AMMN. 20MM AMR HEI.

"SPIRAL" TO OFAJ DRG.NO. FS-2469B FOR FUZE M842 FOR AMMN. 20MM AMR HEI.

STEEL ROUND TO SPECN. BS-970 PT.III:1991 GRADE 080M40 HARDENED & TEMPERED COLD DRAWN SIZE 6.00 +1.00 MM DIA.

STEEL ROUND TO SPECN. BS-970 PT.III:1991 GRADE 080M40 HARDENED & TEMPERED COLD DRAWN SIZE 6.00 +1.00 MM DIA.

STEEL ROUND TO SPECN. BS-970 PT.III 1991 GRADE 430S17 FERRITIC STEEL COLD DRAWN SIZE 1.8-0.014 MM DIA.

STEEL ROUND TO SPECN. BS-970 PT.III 1991 GRADE 430S17 FERRITIC STEEL COLD DRAWN SIZE 1.8-0.014 MM DIA.

EXTRUDED,COLD DRAWN ALUMINIUM ALLOY ROUND TO SPECN BS:1474- 1987 DESIGN.2014A COND TB IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE:- 14.5 + 0.5/ - 0.1 MM DIA.

EXTRUDED,COLD DRAWN ALUMINIUM ALLOY ROUND TO SPECN BS:1474- 1987 DESIGN.2014A COND TB IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE:- 14.5 + 0.5/ - 0.1 MM DIA.

STRIKER GUIDE TO OFAJ DRG.NO.FS-2470 C FOR FUZE M842 FOR AMMN.20MM AMR HEI.

STRIKER GUIDE TO OFAJ DRG.NO.FS-2470 C FOR FUZE M842 FOR AMMN.20MM AMR HEI.

STEEL ROUND TO SPECN: BS-970 PART-3 :1991 GRADE 430S17 COLD DRAWN SIZE 8.00+1.00 MM DIA.

STEEL ROUND TO SPECN: BS-970 PART-3 :1991 GRADE 430S17 COLD DRAWN SIZE 8.00+1.00 MM DIA.

STEEL ROUND TO SPECN. BS-970, PT.I 1983 GRADE 220M07 COLD DRAWN FROM HOT ROLLED CONDITION SIZE 18.5 +1.00 MM DIA. IN STRAIGHT LENGTH OF 2 TO 3.5 MTRS.

STEEL ROUND TO SPECN. BS-970, PT.I 1983 GRADE 220M07 COLD DRAWN FROM HOT ROLLED CONDITION SIZE 18.5 +1.00 MM DIA. IN STRAIGHT LENGTH OF 2 TO 3.5 MTRS.

ARALDITE CY-230 IN 30 KG. PACK.

ARALDITE CY-230 IN 30 KG. PACK.

FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG.NO. FS-2375H FOR TAIL UNIT.

FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG.NO. FS-2375H FOR TAIL UNIT.

ARALDITE HARDNER HY-951, IN 30 KG. PACK.

ARALDITE HARDNER HY-951, IN 30 KG. PACK.

CONTAINER CARTRIDGES FULLY FINISHED TO DRG.NO.ITV-30 DC 37344-A

CONTAINER CARTRIDGES FULLY FINISHED TO DRG.NO.ITV-30 DC 37344-A

CONTAINER CARTRIDGE SEMIFINISHED TO OFAJ DRAWING NO.FS-2956C (ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE S.O. FIRMS TO INDICATE THE SAME IN THE QUOTATION)

CONTAINER CARTRIDGE SEMIFINISHED TO OFAJ DRAWING NO.FS-2956C (ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE S.O. FIRMS TO INDICATE THE SAME IN THE QUOTATION)

SET OF FINS FULLY FINISHED TO DRG.NO.ITV-51 DC 35508-A DT.20-5-93 (FOR 81MM TAIL UNIT 1A)

SET OF FINS FULLY FINISHED TO DRG.NO.ITV-51 DC 35508-A DT.20-5-93 (FOR 81MM TAIL UNIT 1A)

CONVERSION OF DIE CAST FIN TO DRAWING NO.DC-11 E INTO MACHINED FINS WITHOUT SURFACE TREATMENT TO DRAWING NO.FS-2934.

CONVERSION OF DIE CAST FIN TO DRAWING NO.DC-11 E INTO MACHINED FINS WITHOUT SURFACE TREATMENT TO DRAWING NO.FS-2934.

FORGING FOR 1st GEAR ON MAIN SHAFT, STLN- BS-III, PT. NO. F1668011-3

FORGING FOR 1st GEAR ON MAIN SHAFT, STLN- BS-III, PT. NO. F1668011-3

DRG. NO. F1668011-3

FORG FOR REVERSE IDLER GEAR , STLN- BS-III, PT. NO. F8A02611-3

FORG FOR REVERSE IDLER GEAR , STLN- BS-III, PT. NO. F8A02611-3

DRG. NO. F8A02611-3

FORG FOR OUT PUT FLANGE, STLN- BS-III, PT. NO. F1402311-3

FORG FOR OUT PUT FLANGE, STLN- BS-III, PT. NO. F1402311-3

DRG. NO. F1402311-3

FORGING FOR REVERSE GEAR ON MAIN SHAFT, STLN-BS-III, PART NO. F1668311-3

FORGING FOR REVERSE GEAR ON MAIN SHAFT, STLN-BS-III, PART NO. F1668311-3

DRG. NO. F1668311-3

FORGING FOR MAIN SHAFT STLN- BS-III, DRG. NO. F3318711-3

FORGING FOR MAIN SHAFT STLN- BS-III, DRG. NO. F3318711-3

DRG. NO. F3318711-3

FORGING FOR(CONST.MESH GEAR) HELICAL GEAR LAY SHAFT, STLN-BS-III, PT. NO. F 1668511-3

FORGING FOR(CONST.MESH GEAR) HELICAL GEAR LAY SHAFT, STLN-BS-III, PT. NO. F 1668511-3

DRG. NO. F 1668511-3