STEEL STRIP TO SPECIFICATION IS:513-2008 GRADE CR3 OR GRADE 1CS OF BS:1449 SECTION 1.1:1991 TO SIZE 0.1 -0.02MM THICK X 18 MM WIDE IN COIL FORM (REF.DRG.NO.BW8.635.085 FOR CAP)
Specification
STEEL STRIP TO SPECIFICATION IS:513-2008 GRADE CR3 OR GRADE 1CS OF BS:1449 SECTION 1.1:1991 TO SIZE 0.1 -0.02MM THICK X 18 MM WIDE IN COIL FORM (REF.DRG.NO.BW8.635.085 FOR CAP)
BRASS ROUND TO SPECN. BS EN 12166:1998 DESIGN. CUZN35PB2 MATERIAL COND. R540 WITH UTS=54-65 KGF/MM2 & ELON = 5% MIN SIZE: 4.0 +/- 0.1 MM DIA IN STRAIGHT LENGTH
Specification
BRASS ROUND TO SPECN. BS EN 12166:1998 DESIGN. CUZN35PB2 MATERIAL COND. R540 WITH UTS=54-65 KGF/MM2 & ELON = 5% MIN SIZE: 4.0 +/- 0.1 MM DIA IN STRAIGHT LENGTH
BRASS ROUND TO SPECN. BS EN 12166:1998 DESIGN. CUZN35PB2 MATERIAL COND. R540 WITH UTS=54-65 KGF/MM2 & ELON = 5% MIN SIZE: 4.5 +/- 0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METERS
Specification
BRASS ROUND TO SPECN. BS EN 12166:1998 DESIGN. CUZN35PB2 MATERIAL COND. R540 WITH UTS=54-65 KGF/MM2 & ELON = 5% MIN SIZE: 4.5 +/- 0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METERS
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
00
As Per Requirement
Kilogram
24242
OFAJ/MFCC/FZ162 MK-8 &9 /SEP-2018
Ordnance Factory Ambajhari
The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021
BLACK PAINT MAT FINISH FOR FINISHING AMMUNITION, AIR DRYING& GENERAL PURPOSE TO SPECIFICATION IS:168(1993) 3RD REVISION, REAFFIRMED 2002 AS APPLICABLE FOR DEFENCE USE.
Specification
BLACK PAINT MAT FINISH FOR FINISHING AMMUNITION, AIR DRYING& GENERAL PURPOSE TO SPECIFICATION IS:168(1993) 3RD REVISION, REAFFIRMED 2002 AS APPLICABLE FOR DEFENCE USE.
EXTRUDED FORMED BAR TO OFAJ. DRG. NO. FS-99 G. (Bar has to be free from surface defects like burs, scratch, cut marks & Inclusions. Straightness 0.5 mm max.in 1 meter length).
Specification
EXTRUDED FORMED BAR TO OFAJ. DRG. NO. FS-99 G. (Bar has to be free from surface defects like burs, scratch, cut marks & Inclusions. Straightness 0.5 mm max.in 1 meter length).
BRASS ROUND TO SPECN.BS:2872 CZ123 OR BS-2874-1986 GR.CZ-122IN "M" OR "H" CONDITION OR BS:2874- CZ 121 PB3 IN M CONDITIO HAVING STRAIGHT LENGTH OF 1.5- 2 MTRS. SIZE:5.00-0.03 MM DIAHAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR
Specification
BRASS ROUND TO SPECN.BS:2872 CZ123 OR BS-2874-1986 GR.CZ-122IN "M" OR "H" CONDITION OR BS:2874- CZ 121 PB3 IN M CONDITIO HAVING STRAIGHT LENGTH OF 1.5- 2 MTRS. SIZE:5.00-0.03 MM DIAHAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR
BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN "M"CONDITION HAVING STRAIGHT LENGTH OF 1.5 TO 2 METRES, SIZE: 3.00-0.03 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO0.3 MM/MTR
Specification
BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN "M"CONDITION HAVING STRAIGHT LENGTH OF 1.5 TO 2 METRES, SIZE: 3.00-0.03 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO0.3 MM/MTR
BRASS ROUND TO SPECN.BS: 2873 (LATEST ISSUE) GRADE CZ 108, CONDITION HALF HARD HAVING STRAIGHT LENGTH OF 1.5 TO 2 MTRSSIZE: 5.00-0.03 MM DIA HAVING STRAIGHTNESS LESS THAN OREQUAL TO 0.3 MM/MTR.
Specification
BRASS ROUND TO SPECN.BS: 2873 (LATEST ISSUE) GRADE CZ 108, CONDITION HALF HARD HAVING STRAIGHT LENGTH OF 1.5 TO 2 MTRSSIZE: 5.00-0.03 MM DIA HAVING STRAIGHTNESS LESS THAN OREQUAL TO 0.3 MM/MTR.
COLD DRAWN SPRING STEEL WIRE TO SPECN.IS:4454 PT.I 1981(2ND REVISION) GRADE 3 OR BS:5216-1991 GRADE HS-3 HAVINGMIN.UTS OF 2470 MPA IN COIL FORM SIZE:0.47 +/-0.008 MM DIA
Specification
COLD DRAWN SPRING STEEL WIRE TO SPECN.IS:4454 PT.I 1981(2ND REVISION) GRADE 3 OR BS:5216-1991 GRADE HS-3 HAVINGMIN.UTS OF 2470 MPA IN COIL FORM SIZE:0.47 +/-0.008 MM DIA
COLD DRAWN SPRING STEEL WIRE TO SPECN.IS:4454 PT.I 1981GR.3 OR BS:5216 1975 GR. HS-3 HAVING MIN. UTS OF 2470 MPAIN COIL FORM SIZE:-0.376 +/-0.009 MM DIA
Specification
COLD DRAWN SPRING STEEL WIRE TO SPECN.IS:4454 PT.I 1981GR.3 OR BS:5216 1975 GR. HS-3 HAVING MIN. UTS OF 2470 MPAIN COIL FORM SIZE:-0.376 +/-0.009 MM DIA
BALL BEARING TO CQA(AMMN) DRG.PART NO.QX-1538 DC(I)37162-ADTD.11.03.08 MADE UP OF ONLY STEEL TO SPECN.BS-970 PART 1: 1983 GRADE 410 S 21 OR 416 S 21 CONDITION "P"
Specification
BALL BEARING TO CQA(AMMN) DRG.PART NO.QX-1538 DC(I)37162-ADTD.11.03.08 MADE UP OF ONLY STEEL TO SPECN.BS-970 PART 1: 1983 GRADE 410 S 21 OR 416 S 21 CONDITION "P"
CARBON STEEL ROUND BAR TO SPECN.BS:970 PT.1-1983,GRADE080M40 IN COLD DRAWN OR HEAT TREATED TO "R"COND. WITHHARDNESS 207-255 HB OR GRADE 080M50 IN COLD DRAWN FROMNORMALISED CONDITION WITH HARDNESS 207-255 HB,IN STRAIGTHLENGTH OF 2 - 3 METRES SIZE- 5.5 -0.1 MM DIA.
Specification
CARBON STEEL ROUND BAR TO SPECN.BS:970 PT.1-1983,GRADE080M40 IN COLD DRAWN OR HEAT TREATED TO "R"COND. WITHHARDNESS 207-255 HB OR GRADE 080M50 IN COLD DRAWN FROMNORMALISED CONDITION WITH HARDNESS 207-255 HB,IN STRAIGTHLENGTH OF 2 - 3 METRES SIZE- 5.5 -0.1 MM DIA.
COLD DRAWN CARBON STEEL ROUND BARS TO SPECN.BS:970 PT.3-1991 GR. 070M20 IN BRIGHT FINISHED CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES SIZE: 12.7 -0.05 MM DIA (10 % MAX. SHORTS DOWN TO 1.5 METRES LENGTH ALLOWED).
Specification
COLD DRAWN CARBON STEEL ROUND BARS TO SPECN.BS:970 PT.3-1991 GR. 070M20 IN BRIGHT FINISHED CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES SIZE: 12.7 -0.05 MM DIA (10 % MAX. SHORTS DOWN TO 1.5 METRES LENGTH ALLOWED).
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
00
AS PER REQUIREMENT
Kilogram
24243
LPTA/09/2018/01
Vehicle Factory Jabalpur
The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009
MANUFACTURING ASSY & MOUNTING OF 2 KL STAINLESS STEEL WATER BOWSER (TANK) TO BE MOUNTED ON LPTA 715/ TC-32 CHASIS AS PER SPECN NO. CQAE/2540/1612/a AND DRG NO. 2230.38.01/V1 & CONNECTED DRGS.
Specification
MANUFACTURING ASSY & MOUNTING OF 2 KL STAINLESS STEEL WATER BOWSER (TANK) TO BE MOUNTED ON LPTA 715/ TC-32 CHASIS AS PER SPECN NO. CQAE/2540/1612/a AND DRG NO. 2230.38.01/V1 & CONNECTED DRGS.
Drawing no.
CQAE/2540/1612/a AND DRG NO. 2230.38.01/V1 & CONNECTED DRGS.
TYRE PNEUMATIC 12.00 X 20, PLY 18 NYLON SAND CUM HIGHWAY PATTERN LV-6/MT-14/ 2610-000315 AS PER SPECN. NO. IND/2079/2018
Specification
TYRE PNEUMATIC 12.00 X 20, PLY 18 NYLON SAND CUM HIGHWAY PATTERN LV-6/MT-14/ 2610-000315 AS PER SPECN. NO. IND/2079/2018
Drawing no.
LV-6/MT-14/ 2610-000315
Manufacturing Technology
mixing , extrusion, rubberisation fabric, bead building, tyre building, curing of tyre, post cure inflation , trimming facility etc as per file attached
visual check, dimensional check, material test- physical properties of tread and side wall rubber, load & inflation test, endurance test , Tyre strength test, ( plunger test, high speed test p[performance test , fitment & performance test , marking test& packing test as per file attached
TYRE PNEUMATIC 12.00 X 20, PLY 18 "CC" PATTERN PT. NO. LV6/MT-14 2610 000301 AS PER SPECN NO..IND/VEH/2079/2018
Specification
TYRE PNEUMATIC 12.00 X 20, PLY 18 "CC" PATTERN PT. NO. LV6/MT-14 2610 000301 AS PER SPECN NO..IND/VEH/2079/2018
Drawing no.
LV6/MT-14 2610 000301
Manufacturing Technology
mixing , extrusion, rubberisation fabric, bead building, tyre building, curing of tyre, post cure inflation , trimming facility etc as per file attached
visual check, dimensional check, material test- physical properties of tread and side wall rubber, load & inflation test, endurance test , Tyre strength test, ( plunger test, high speed test p[performance test , fitment & performance test , marking test& packing test etc as per file attached
1.TUBE INNER PNEU TYPE 12.00X20 WITH VALVE DOUBLE BEND 21MM VH63 MM TIP END 70 MM BEND 90 DEG LV/6/MT-142610000302/REF DRG 2.FLAP RUST SLIP ITTAC NO.20 RR NO.8.00/7.50 RIM, DRG NO. LV-6/MT,142610000250/REF DRG (PART NO. 2574.4010.6302) TUBE INNER PART NO 2574 4010 0119
Specification
1.TUBE INNER PNEU TYPE 12.00X20 WITH VALVE DOUBLE BEND 21MM VH63 MM TIP END 70 MM BEND 90 DEG LV/6/MT-142610000302/REF DRG 2.FLAP RUST SLIP ITTAC NO.20 RR NO.8.00/7.50 RIM, DRG NO. LV-6/MT,142610000250/REF DRG (PART NO. 2574.4010.6302) TUBE INNER PART NO 2574 4010 0119
ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 GRADE 24345 OR BS:1474-1987 GR.2014A IN COLD DRAWN CONITION HAVING STRAIGHT LENGTH OF 1.5 METRES MINIMUM, SIZE:- 10 +/- 0.2 MM DIA
Specification
ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 GRADE 24345 OR BS:1474-1987 GR.2014A IN COLD DRAWN CONITION HAVING STRAIGHT LENGTH OF 1.5 METRES MINIMUM, SIZE:- 10 +/- 0.2 MM DIA
BRASS ROUND TO SPECN.BSEN 12166-1998 desig CuZn39Pb2 IN COLD WORKED AND STRESS RELIEVED CONDITION WITH UTS 50 TO 65 KGF/M M SQ. AND ELONGATION 5% Min. IN STRAIGHT LENGTH OF 2 TO 3 METRES SIZE:4.5+/-0.05 MM DIA.
Specification
BRASS ROUND TO SPECN.BSEN 12166-1998 desig CuZn39Pb2 IN COLD WORKED AND STRESS RELIEVED CONDITION WITH UTS 50 TO 65 KGF/M M SQ. AND ELONGATION 5% Min. IN STRAIGHT LENGTH OF 2 TO 3 METRES SIZE:4.5+/-0.05 MM DIA.
ALUMINIUM ALLOY ROD TO SPECN.IS:733-1983 REAFFERMED 2006 GR. 24345 IN WP COND. WITH MECH.PROPERTIES RM-40 KGF/SQ.MM(MIN) RP 0.2-28 KGF/SQ.MM (MIN) A5-10 MIN SIZE:10 +/- 0.1MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1.5 METERS AND 1MM MAXIMUM PGG ON RADIUS
Specification
ALUMINIUM ALLOY ROD TO SPECN.IS:733-1983 REAFFERMED 2006 GR. 24345 IN WP COND. WITH MECH.PROPERTIES RM-40 KGF/SQ.MM(MIN) RP 0.2-28 KGF/SQ.MM (MIN) A5-10 MIN SIZE:10 +/- 0.1MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1.5 METERS AND 1MM MAXIMUM PGG ON RADIUS
STEEL STRIP TO SPECIFICATION IS:513-2008 GRADE CR3 OR GRADE 1CS OF BS:1449 SECTION 1.1:1991 TO SIZE 0.1 -0.02MM THICK X 20MM WIDE IN COIL FORM (REF.DRG.NO.BW8.635.085 FOR CAP)
Specification
STEEL STRIP TO SPECIFICATION IS:513-2008 GRADE CR3 OR GRADE 1CS OF BS:1449 SECTION 1.1:1991 TO SIZE 0.1 -0.02MM THICK X 20MM WIDE IN COIL FORM (REF.DRG.NO.BW8.635.085 FOR CAP)
ALUMINIUM ALLOY ROD TO SPECN.IS:733 REAFFERMED 2006 GR.24345 IN WP COND.SIZE:14 +/- 0.1 MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1.5 METERS AND 1 MM MAXIMUM PGG ON RADIUS
Specification
ALUMINIUM ALLOY ROD TO SPECN.IS:733 REAFFERMED 2006 GR.24345 IN WP COND.SIZE:14 +/- 0.1 MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1.5 METERS AND 1 MM MAXIMUM PGG ON RADIUS
BRASS STRIP TO SPECIFICATION BS EN1652-1998 DESIGN CUZN39PB2 MATERIAL CONDITION R420 WITH UTS 42-50 KGF/MM2, AND ELONGATION 18% MIN.TO SIZE 1.0 - 0.10MM THICK X 10 MM WIDE IN COIL FORM (REF.DRG.NO.BW8.264.006 FOR SLIDER)
Specification
BRASS STRIP TO SPECIFICATION BS EN1652-1998 DESIGN CUZN39PB2 MATERIAL CONDITION R420 WITH UTS 42-50 KGF/MM2, AND ELONGATION 18% MIN.TO SIZE 1.0 - 0.10MM THICK X 10 MM WIDE IN COIL FORM (REF.DRG.NO.BW8.264.006 FOR SLIDER)
BRASS STRIP TO SPECIFICATION BS EN 1652-1998 DESIGN CUZN37MATERIAL CONDITION R550 WITH UTS 55-65 KGF/MM2,ELONGATION 4%MIN. TO SIZE 0.6 - 0.06MM THICK X 12 MM WIDE IN COIL FORM (REF.DRG.NO.BW8.388.004)
Specification
BRASS STRIP TO SPECIFICATION BS EN 1652-1998 DESIGN CUZN37MATERIAL CONDITION R550 WITH UTS 55-65 KGF/MM2,ELONGATION 4%MIN. TO SIZE 0.6 - 0.06MM THICK X 12 MM WIDE IN COIL FORM(REF.DRG.NO.BW8.388.004)
ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 REAFFIRMED 2006 GR.24345 IN "WP" HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 21 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS
Specification
ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 REAFFIRMED 2006 GR.24345 IN "WP" HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 21 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS