LEADED BRASS ROUND TO SPECN.BS:2874 (LATEST ISSUE) GR.CZ-121PB 3 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRSSIZE: 3.658 -0.05 MM DIA

LEADED BRASS ROUND TO SPECN.BS:2874 (LATEST ISSUE) GR.CZ-121PB 3 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRSSIZE: 3.658 -0.05 MM DIA

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN "M"CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE:- 3.00 +/- 0.04 MM DIA.

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN "M"CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE:- 3.00 +/- 0.04 MM DIA.

CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2395D FOR ILLU BASE

CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2395D FOR ILLU BASE

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO. FS-2377E FOR ILLU. SHELL BODY.

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO. FS-2377E FOR ILLU. SHELL BODY.

DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG.

DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG.

CONVERSION OF AL. ALLOY TUBE OD 88 X ID 60 (ITEM CODE : 170095PR46) TO BLANKS FOR ILLU SHELL BODY TO DRG. NO. FS-2915A

CONVERSION OF AL. ALLOY TUBE OD 88 X ID 60 (ITEM CODE : 170095PR46) TO BLANKS FOR ILLU SHELL BODY TO DRG. NO. FS-2915A

CONVERSION OF AL.ALLOY TUBE 60.00 +/-0.5 MM ID & 13.00 +1.0O mm TH.TO BLANKS FOR ILLU. SHELL BODY TO DRG.NO. FS-2915.

CONVERSION OF AL.ALLOY TUBE 60.00 +/-0.5 MM ID & 13.00 +1.0O mm TH.TO BLANKS FOR ILLU. SHELL BODY TO DRG.NO. FS-2915.

AL.ALLOY TUBE TO OFAJ DRAWING NO.SK-1410 FOR ILLU SHELL BODY

AL.ALLOY TUBE TO OFAJ DRAWING NO.SK-1410 FOR ILLU SHELL BODY

ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002.

ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002.

GROUND STAINLESS STEEL ROD TO SPECIFICATION BS 970:PT-1:1983 GRADE 303S31 SIZE:- 8 MM -0.07 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION BS 970:PT-1:1983 GRADE 303S31 SIZE:- 8 MM -0.07 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4305-AT SIZE: 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4305-AT SIZE: 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4523+QT SIZE:- 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4523+QT SIZE:- 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

COLD ROLLED ALUMINIUM ALLOY SHEETS TO OFAJ SPECN. CC-388, SIZE: 10.3 + 0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG.

COLD ROLLED ALUMINIUM ALLOY SHEETS TO OFAJ SPECN. CC-388, SIZE: 10.3 + 0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG.

O RING 74.3 X 3 TO OFAJ DRAWING NO.FS-3036A

O RING 74.3 X 3 TO OFAJ DRAWING NO.FS-3036A

BLIND RIVET TO OFAJ DRAWING NO.FS-3035

BLIND RIVET TO OFAJ DRAWING NO.FS-3035

O RING 7.1 X 1.6 TO OFAJ DRAWING NO.FS-3034A

O RING 7.1 X 1.6 TO OFAJ DRAWING NO.FS-3034A

CONVERSION OF FUZE HOLDER TO OFAJ DRG.NO FS-3025 INTO FUZE HOLDER ASSY.TO OFAJ DRAWING NO FS-3027 BY VULCANIZATION

CONVERSION OF FUZE HOLDER TO OFAJ DRG.NO FS-3025 INTO FUZE HOLDER ASSY.TO OFAJ DRAWING NO FS-3027 BY VULCANIZATION

O RING 21 X 2 TO OFAJ DRAWING NO.FS-3033A

O RING 21 X 2 TO OFAJ DRAWING NO.FS-3033A

SLIDE SHOE TO OFAJ DRAWING NO FS-3024

SLIDE SHOE TO OFAJ DRAWING NO FS-3024

COPPER STRIP TO SPECN. EN 13604-CW009A HAVING STRAIGHT LENGTH OF 2.5 TO 3 MTS. SIZE:64 +/-1 MM WIDE X 4 +0.1 MM THICK

COPPER STRIP TO SPECN. EN 13604-CW009A HAVING STRAIGHT LENGTH OF 2.5 TO 3 MTS. SIZE:64 +/-1 MM WIDE X 4 +0.1 MM THICK

OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100MM X THICKNESS 14 +0.1MM X 1440MM LONG (APPROX)

OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100MM X THICKNESS 14 +0.1MM X 1440MM LONG (APPROX)

25 MM +0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG ROLLED ALUMINIUM ALLOY SHEET TO SPECIFICATION (A) US SPECN. GR-AA 6082 IN "M" CONDITION OR (B) BS 1474 - 1987, GR-6082 IN "F" CONDITION OR (C) IS 733-83, GR-64430 IN "M" CONDITION

25 MM +0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG ROLLED ALUMINIUM ALLOY SHEET TO SPECIFICATION (A) US SPECN. GR-AA 6082 IN "M" CONDITION OR (B) BS 1474 - 1987, GR-6082 IN "F" CONDITION OR (C) IS 733-83, GR-64430 IN "M" CONDITION

LINER, MAIN CHARGE TO DRG.NO.304101457

LINER, MAIN CHARGE TO DRG.NO.304101457

LINER MAIN CHARGE TO OFAJ DRAWING NO.FS-3026

LINER MAIN CHARGE TO OFAJ DRAWING NO.FS-3026

FORG. FOR SLEEVE. STLN- BS-III ,PART NO. F3424215-3(R1)

FORG. FOR SLEEVE. STLN- BS-III ,PART NO. F3424215-3(R1)

DRG. NO. F3424215-3(R1)

FORG. FOR SLEEVE, STLN- BS-III, PART NO. F3427015-3(R1) ON 4th GR.M/S

FORG. FOR SLEEVE, STLN- BS-III, PART NO. F3427015-3(R1) ON 4th GR.M/S

DRG. NO. F3427015-3(R1)

E-SHIFT CYLINDER BODY PT. NO. X1831042-V1

E-SHIFT CYLINDER BODY PT. NO. X1831042-V1

. X1831042-V1

SHIFT CYLINDER BODY PT. NO. F-1830942-V1

SHIFT CYLINDER BODY PT. NO. F-1830942-V1

F-1830942-V1

METALASTIK BUSH PART NO. X0500250-HASE

METALASTIK BUSH PART NO. X0500250-HASE

X0500250

NY. LOCK NUT 7/8" BST PT. NO.-F3547515 HASE

NY. LOCK NUT 7/8" BST PT. NO.-F3547515 HASE

F3547515

BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014

BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014

SLOTTED NUT PART NO. F3596815-A

SLOTTED NUT PART NO. F3596815-A

F3596815-A

SPECIAL SCREW -X 3534511 V1 SIZE M14×2×40 IPL NO. 109/F(XL) ASSY

SPECIAL SCREW -X 3534511 V1 SIZE M14×2×40 IPL NO. 109/F(XL) ASSY

X 3534511 V1

LOCKING WASHER /SECURING WASHER PT.NO. X4902110-(7)

LOCKING WASHER /SECURING WASHER PT.NO. X4902110-(7)

X4902110-(7)

SPECIAL SCREW PT. NO. X3535311-V1 SIZE M16×2×50 DRG NO. X3534511 -V1

SPECIAL SCREW PT. NO. X3535311-V1 SIZE M16×2×50 DRG NO. X3534511 -V1

X3534511 -V1

AXLE TUBE NUT DRG/PART NO. F3550511-A

AXLE TUBE NUT DRG/PART NO. F3550511-A

F3550511-A

STEEL ROUND 32 MM DIA SPECN 16 MN CR5

STEEL ROUND 32 MM DIA SPECN 16 MN CR5

STEEL ROUND 25 MM DIA SPECN EN-16 TO BS-970 FOR LOCKING BOLT TO PT NO. F3573815 # REAR AXLE ASSY.

STEEL ROUND 25 MM DIA SPECN EN-16 TO BS-970 FOR LOCKING BOLT TO PT NO. F3573815 # REAR AXLE ASSY.

STUD 3/8" F3751015 VI

STUD 3/8" F3751015 VI

F3751015 VI

SPECIAL SCREW SIZE M14×2×60 IPL NO. 110/FX L PT. NO. X3534611 V1 DRG NO. X3534511 V1

SPECIAL SCREW SIZE M14×2×60 IPL NO. 110/FXL PT. NO. X3534611 V1 DRG NO. X3534511 V1

X3534511 V1

FLANGE SCREW HEX M16X1.5X40 LONG-GR.12.9

FLANGE SCREW HEX M16X1.5X40 LONG-GR.12.9

X3535411

STA JOINT FLANGE (FINISH) BS-III, MK-IV,F/XL PART NO. X1806122, STALLION

STA JOINT FLANGE (FINISH) BS-III, MK-IV,F/XL PART NO. X1806122, STALLION

X1806122-V1

ASSY. WHEEL NUT M22×2.5 PT.NO.F3569510

ASSY. WHEEL NUT M22×2.5 PT.NO.F3569510

F3569510

WHEEL BOLT M22×2.5 PART NO. F-3569310-C

WHEEL BOLT M22×2.5 PART NO. F-3569310-C

F3569310_Rev_C

LIQUID GASKET ANABOND-673 TWO CARTRIDGES OF 350 GMS EACH C-5026016 OR EQUIVALENT

LIQUID GASKET ANABOND-673 TWO CARTRIDGES OF 350 GMS EACH C-5026016 OR EQUIVALENT

Front BRAKE ASSY. RH FRONT AXLE STALLION PT. NO. F3P16900 REF DRG. NO. F3P16800 ISSUE HASH.1

Front BRAKE ASSY. RH FRONT AXLE STALLION PT. NO. F3P16900 REF DRG. NO. F3P16800 ISSUE HASH.1

F3P16800 LH & F3P16900 RH-#.1

STA-BRAKE CHAMBER/ WEDGE BRAKE ACTUATOR,MK-IV Part no. F8289600 STALLION VEHICLE BS-III NORNS PART NO./DRG. NO. F8289600-HASE.2

STA-BRAKE CHAMBER/ WEDGE BRAKE ACTUATOR,MK-IV Part no. F8289600 STALLION VEHICLE BS-III NORNS PART NO./DRG. NO. F8289600-HASE.2

F8289600_2_

TIE ROD ASSY PT NO. B2594502

TIE ROD ASSY PT NO. B2594502

B2594502

SPIGOT STEERING KNUCKLE PT. NO. X-1804011-D REF DRG NO. X1804011D SHEET 2 OF 2 FOR FORGING DRG.

SPIGOT STEERING KNUCKLE PT. NO. X-1804011-D REF DRG NO. X1804011D SHEET 2 OF 2 FOR FORGING DRG.

X1804011-D_1_(Machined)_2-Finish__Rev_D

REAR BRAKE ASSY. RH Pt.No. F3P03600-A

REAR BRAKE ASSY. RH Pt.No. F3P03600-A

F3P03500-A

REAR BRAKE ASSY. LH PART NO. F3P03500-A

REAR BRAKE ASSY. LH PART NO. F3P03500-A

F3P03600_(Ref_Drawing_F3P03500)_A_

Front BRAKE ASSY. LH PT.NO. F3P16800 ISSUE HASH.1

Front BRAKE ASSY. LH PT.NO. F3P16800 ISSUE HASH.1

F3P16800 LH & F3P16900 RH-#.1

STA-REAR AXLE/HALF AXLE PART NO. B3045901

STA-REAR AXLE/HALF AXLE PART NO. B3045901

B3045901 #.1

STA-FRONT AXLE/HALF AXLE MARK-IV, BS-III COMPLAINTS PART NO. B2542501 HASE.1 STALLION VEHICLE

STA-FRONT AXLE/HALF AXLE MARK-IV, BS-III COMPLAINTS PART NO. B2542501 HASE.1 STALLION VEHICLE

B2542501#.1

S/A OF TC WITH COVER PT. NO. B1900905 HASH.0 CONSISTING OF (1) X1801622 (2) B-1900113 HC TR. CASE COVER (3)F0936215 HB DOWEL (4) F3756715(Ref -F37403154-HA) (5) L3080511 PL. NUT (6) L4100500 SC. WASHER

S/A OF TC WITH COVER PT. NO. B1900905 HASH.0 CONSISTING OF (1) X1801622 (2) B-1900113 HC TR. CASE COVER (3)F0936215 HB DOWEL (4) F3756715(Ref -F37403154-HA) (5) L3080511 PL. NUT (6) L4100500 SC. WASHER

B-1900905 HASH

PIN TO DRG NO. IQX 579 DC 34416-A DTD.29.06.88

PIN TO DRG NO. IQX 579 DC 34416-A DTD.29.06.88

BRASS ROD TO SPECIFICATION BS:2874 CZ121 SIZE: 65MM DIA

BRASS ROD TO SPECIFICATION BS:2874 CZ121 SIZE: 65MM DIA

BRASS ROD TO SPECIFICATION BS:2874 CZ121 OR BS:2872 CZ122 SIZE; 58 MM DIA

BRASS ROD TO SPECIFICATION BS:2874 CZ121 OR BS:2872 CZ122 SIZE; 58 MM DIA

BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE: DIA 44 -0.1 0 MM WITH MIN 1.5 MTR STRAIGHT LENGTH

BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE: DIA 44 -0.1 0 MM WITH MIN 1.5 MTR STRAIGHT LENGTH

BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE: DIA 42 - 0 10 MM WITH MIN 1.5 MTR STRAIGHT LENGTH

BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE: DIA 42 - 0 10 MM WITH MIN 1.5 MTR STRAIGHT LENGTH

STEEL WIRE 16 SWG (1.626) TO BS 970 PT 1 -1983 GRD 080M40 OR 080A52 PT5 :1972:080A52

STEEL WIRE 16 SWG (1.626) TO BS 970 PT 1 -1983 GRD 080M40 OR 080A52 PT5 :1972:080A52

AL ALLOY ROD TO SPEC BS 1474:1972 DESIG.2014A, COND TB SIZE: DIA 16 + 0.05/-0.10 MM HAVING MIN 1.5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS

AL ALLOY ROD TO SPEC BS 1474:1972 DESIG.2014A, COND TB SIZE: DIA 16 + 0.05/-0.10 MM HAVING MIN 1.5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS

BRASS ROD BS 2874:1969 CZ121 3 PB COND M SIZE: DIA 31.75 +/- 0.1 MM HAVING MIN 1.5 MTR STRAIGHT LENGTH.

BRASS ROD BS 2874:1969 CZ121 3 PB COND M SIZE: DIA 31.75 +/- 0.1 MM HAVING MIN 1.5 MTR STRAIGHT LENGTH.

BRASS WIRE HARD DRAWN TO BS 2873-1963 GRADE CZ 119 SIZE: DIA 1.00 +/- 0.015MM

BRASS WIRE HARD DRAWN TO BS 2873-1963 GRADE CZ 119 SIZE: DIA 1.00 +/- 0.015MM

WIRE SHEAR LOCKING WEIGHT TO DRG NO. IQX 605 DC 34168-A DTD. 27.06.87

WIRE SHEAR LOCKING WEIGHT TO DRG NO. IQX 605 DC 34168-A DTD. 27.06.87

AL ALLOY ROD TO SPEC BS 1474:1972 DESIG.2014A, COND TB SIZE: DIA 20 + 0.08/-0.13MM HAVING MIN 1.5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS

AL ALLOY ROD TO SPEC BS 1474:1972 DESIG.2014A, COND TB SIZE: DIA 20 + 0.08/-0.13MM HAVING MIN 1.5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS

HOLDER TO DRG NO. QX 208 DC 34752A

HOLDER TO DRG NO. QX 208 DC 34752A

HEAD TO DRG NO.IQX 603 & IQX 191 DC 34168-A DTD.27.06.87

HEAD TO DRG NO.IQX 603 & IQX 191 DC 34168-A DTD.27.06.87

STAINLESS STEEL ROD TO BS 970, PT 1-1991 GRD 410-S-21 / 420- S-25 / 416-S-21 SIZE: DIA 5.0 +/- 0.05MM WITH MIN 1.5MTR STRAIGHT LENGTH

STAINLESS STEEL ROD TO BS 970, PT 1-1991 GRD 410-S-21 / 420- S-25 / 416-S-21 SIZE: DIA 5.0 +/- 0.05MM WITH MIN 1.5MTR STRAIGHT LENGTH

SAFETY LUG TO DRG NO.IQX 800 DC 36025-A DTD.01.11.1995

SAFETY LUG TO DRG NO.IQX 800 DC 36025-A DTD.01.11.1995

DOME TO DRG.NO.IQX-816 FOR FUZE 213 MK-5 (M4)

DOME TO DRG.NO.IQX-816 FOR FUZE 213 MK-5 (M4)

PLASTIC CONTAINER TO OFAJ DRG.NO.FS-2451

PLASTIC CONTAINER TO OFAJ DRG.NO.FS-2451

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO.FS-2494B

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO.FS-2494B

PIN STEEL TO BS 970 EN 1A HAVING DIA 2.38 MM LENGTH 3.56

PIN STEEL TO BS 970 EN 1A HAVING DIA 2.38 MM LENGTH 3.56

SCREW GRUB B A STEEL TO BS 970EN 1A, FLAT POINTED NO.4 HAVING OD 0.1417 INCH/3.6MM, TPI 38.5 ,PITCH 0.660MM, LENGTH H 3.0 5-0.25

SCREW GRUB B A STEEL TO BS 970EN 1A, FLAT POINTED NO.4 HAVING OD 0.1417 INCH/3.6MM, TPI 38.5 ,PITCH 0.660MM, LENGTH H 3.0 5-0.25

CAP TO DRG NO.QX 197 DC 36685-A DTD.05.07.2000.

CAP TO DRG NO.QX 197 DC 36685-A DTD.05.07.2000.

SCREW TO DRG NO. QX 968 DC 34168-A DTD.27.06.87

SCREW TO DRG NO. QX 968 DC 34168-A DTD.27.06.87

DISC ALUMINIUM TO BS 1470, SIC 1/2 H OR BS 3L 16 HAVING D IA H 12.19 L12.065 THICKNESS 40 SWG (0.1219MM)

DISC ALUMINIUM TO BS 1470, SIC 1/2 H OR BS 3L 16 HAVING D IA H 12.19 L12.065 THICKNESS 40 SWG (0.1219MM)

WASHER BRASS TO BS 2870 GRADE CZ108 HAVING OD H 12.19 L 12. 065, ID H9.65-0.127, THICKNESS SWG21 (0.813MM)

WASHER BRASS TO BS 2870 GRADE CZ108 HAVING OD H 12.19 L 12. 065, ID H9.65-0.127, THICKNESS SWG21 (0.813MM)

NEEDLE TO DRG NO. QX 203 DC 34279-A DTD.27.11.87

NEEDLE TO DRG NO. QX 203 DC 34279-A DTD.27.11.87