TAPER PACKING, LF NO: 9013111179000, PART NO: X-1208314 V3

TAPER PACKING, LF NO: 9013111179000, PART NO: X-1208314 V3

DRG/ PART NO: X-1208314 V3

BOLT M12 X1.75 X 95, IS-1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED

BOLT M12 X1.75 X 95, IS-1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED

BRACKET (GEAR CHANGE LEVER), LF NO: 9013198019000, PART NO: 610-03-1310-1/E

BRACKET (GEAR CHANGE LEVER), LF NO: 9013198019000, PART NO: 610-03-1310-1/E

DRG/PART NO: 610-03-1310-1/E

BLANK FOR BARREL EXTENSION UPTO OPERATION STAGE-V)TO RFI SK.NO. 6379*7-S.(DC-01/006/18, DT-14-06-2018)FOR RIFLE 5.56MM INSAS. MATERIAL WILL BE PROVIDED BY RIFLE FACTORY, ISHAPORE

BLANK FOR BARREL EXTENSION (UPTO OPERATION STAGE-V)TO RFI SK.NO. 6379*7-S.(DC-01/006/18, DT-14-06-2018)FOR RIFLE 5.56MM INSAS. MATERIAL WILL BE PROVIDED BY RIFLE FACTORY, ISHAPORE

RFI SK NO-6379*6-S

BUSH BOLT 3/4" BSF DRG./PART NO.X-3534115(B)

BUSH BOLT 3/4" BSF DRG./PART NO.X-3534115(B)

DRG./PART NO.X-3534115(B)

SET OF 15 HARNESSESS FOR MINE PROTECTED VEHICLE (ARMY VERSION) (AS PER ENCLOSURE)

SET OF 15 HARNESSESS FOR MINE PROTECTED VEHICLE (ARMY VERSION) (AS PER ENCLOSURE)

THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9

THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9

DRG NO.: 218-03-1089/9

THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8

THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8

DRG NO.:218-03-1089/8

THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7

THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7

218-03-1089/7

THREADED BOSS M8 X 16MM (OD)X25MM LENGTH

THREADED BOSS M8 X 16MM (OD)X25MM LENGTH

THREADED BOSS M8 X 16MM (OD) X12MM LENGTH

THREADED BOSS M8 X 16MM (OD) X12MM LENGTH

THREADED BOSS M6 X 12MM (OD) X12MM LENGTH TO DRG NO.218-03-1089/2

THREADED BOSS M6 X 12MM (OD) X12MM LENGTH TO DRG NO.218-03-1089/2

DRG NO.218-03-1089/2

THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S.

THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S.

INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.5709*14FOR RIFLE 5.56MM INSAS

INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.5709*14FOR RIFLE 5.56MM INSAS

RFI SK.NO.5709*14

TOGGLE SWITCH SINGLE POLE SINGLE THROW 25V/10AMP

TOGGLE SWITCH SINGLE POLE SINGLE THROW 25V/10AMP

DIE CASTING OF TRIGGER HOUSING TO DRG.NO.RFI SK.8877(SHT.1&2) FOR 12 BORE MOD.PAG.

DIE CASTING OF TRIGGER HOUSING TO DRG.NO.RFI SK.8877(SHT.1&2) FOR 12 BORE MOD.PAG.

RFI SK.8877(SHT.1&2)

STRIP ELECTRIC LOOM DRG. NO. 640-06-2022-1/A

STRIP ELECTRIC LOOM DRG. NO. 640-06-2022-1/A

640-06-2022-1/A

FUSE BOX 12 WAY, NAKE-KKK, PART NO K-770, WITH FUSE 24V, 20A, MAKE-KKK, PT. NO. K-777

FUSE BOX 12 WAY, NAKE-KKK, PART NO K-770, WITH FUSE 24V, 20A, MAKE-KKK, PT. NO. K-777

FUSE BOX PIN TYPE WITH GLASS FUSE 24V, 20A, 6WAY MAKE-KKK

FUSE BOX PIN TYPE WITH GLASS FUSE 24V, 20A, 6WAY MAKE-KKK

PLAIN NUT M5 IS:1364 PART-III P.8 GALVD & YELLOW PASSIVATED L3010518

PLAIN NUT M5 IS:1364 PART-III P.8 GALVD & YELLOW PASSIVATED L3010518

FLEXIBLE READING LAMP 24V WITH 2 TO 5 WATT BULB MODEL-AMBASSADOR PT NO-4120900002 MAKE- CARDEC/BOSS

FLEXIBLE READING LAMP 24V WITH 2 TO 5 WATT BULB MODEL-AMBASSADOR PT NO-4120900002 MAKE- CARDEC/BOSS

HEAVY DUTY CABLES DRG. NO. OFPM 640-06-2050-1/E

HEAVY DUTY CABLES DRG. NO. OFPM 640-06-2050-1/E

OFPM 640-06-2050-1/E

RUBBER ITEMS FOR MPV AS PER DRG. NO. MPV/HULL/093/A CONSISTING OF 1. MUD RUBBER - 4 NO/SET, 2. TROOPER COMPARTMENT - 1 NO/SET, 3. FUEL TANK UPPER - 1 NO/SET, 4. FUEL TANK LOWER - 1 NO/SET, 5. CO-DRIVER SIDE - 1 NO/SET, 6. DRIVER SIDE & A.B.C - 1 NO/SET

RUBBER ITEMS FOR MPV AS PER DRG. NO. MPV/HULL/093/A CONSISTING OF 1. MUD RUBBER - 4 NO/SET, 2. TROOPER COMPARTMENT - 1 NO/SET, 3. FUEL TANK UPPER - 1 NO/SET, 4. FUEL TANK LOWER - 1 NO/SET, 5. CO-DRIVER SIDE - 1 NO/SET, 6. DRIVER SIDE & A.B.C - 1 NO/SET

MPV/HULL/093/A

TAIL LAMP RH 4 WAY (TATA 407), LUMAX MAKE PT. NO. MODEL NO. 1300 24V, 4-CHAMBER

TAIL LAMP RH 4 WAY (TATA 407), LUMAX MAKE PT. NO. MODEL NO. 1300 24V, 4-CHAMBER

TAIL LAMP LH 4 WAY (TATA 407), LUMAX MAKE PT. NO. MODEL NO. 1300 24V, 4-CHAMBER

TAIL LAMP LH 4 WAY (TATA 407), LUMAX MAKE PT. NO. MODEL NO. 1300 24V, 4-CHAMBER

HEAD LAMP RH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W)

HEAD LAMP RH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W) MAKE LISPARTS, PT. NO. LHLT-201RH OR LUMAX PT. NO.005-HLA-R

HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W)

HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W) MAKE LISPARTS PT. NO. LHLT-201LH OR LUMAX PT NO. 005-HLA-L

SQ TUBE 40×40×1.6 THICK SPECN IS-4923 ERW (1) 18224.00 MTRS IN LENGTH OF 2278 MM (2) 4792.00 MTRS IN LENGTH OF 2396 MM (3) 3275.00 MTRS IN LENGTH OF 5000 MM OVERALL TOLERANCE IN LENGTH (+) NIL (-) 2 MM

SQ TUBE 40×40×1.6 THICK SPECN IS-4923 ERW (1) 18224.00 MTRS IN LENGTH OF 2278 MM (2) 4792.00 MTRS IN LENGTH OF 2396 MM (3) 3275.00 MTRS IN LENGTH OF 5000 MM OVERALL TOLERANCE IN LENGTH (+) NIL (-) 2 MM

MS ANGLE IRON 50×50×6MM THICK IN LENGTH 5100 MM AS PER IS:2062

MS ANGLE IRON 50×50×6MM THICK IN LENGTH 5100 MM AS PER IS:2062

MS CHANNEL SZ (75×40×40)MM × 4.7 MM THICK TO SPECN IS-2062/94 (RE) CR "SK" IN STREIGHT LENGTH OF 1015 MM

MS CHANNEL SZ (75×40×40)MM × 4.7 MM THICK TO SPECN IS-2062/94 (RE) CR "SK" IN STREIGHT LENGTH OF 1015 MM

S/A OF FOOT STEP DRG/PART NO.B5296504

S/A OF FOOT STEP DRG/PART NO.B5296504

DRG/PART NO.B5296504

TRACK ASSY. TO DRG. NO. 675-35-Cb9, QAI NO.CQA(ICV)QAI/017

QAI NO. CQA(ICV)QAI/017

675-35-Cb9

BRACKET CRANK ARM DRG.NO. AMBV/00800-A

BRACKET CRANK ARM DRG.NO. AMBV/00800-A

DRG.NO. AMBV/00800-A

STEEL ROD 45 MM DIA×150MM LENGTH. SPECIFICATION EN-9 BS:970.

STEEL ROD 45 MM DIA×150MM LENGTH. SPECIFICATION EN-9 BS:970.

RD. BAR 28 MM IN STD. LENGTH SPECN:IS-226

RD. BAR 28 MM IN STD. LENGTH SPECN:IS-226

STEEL ROD 16 MM DIA IN LENGTH OF 3 MTRS SPECN: BS-970, EN-24

STEEL ROD 16 MM DIA IN LENGTH OF 3 MTRS SPECN: BS-970, EN-24

MS PLATE 25 MM THICK × STD. SIZE SPECN: IS:1079, GR ST-42

MS PLATE 25 MM THICK × STD. SIZE SPECN: IS:1079, GR ST-42

MS PLATE 16 MM IS-2062 GR "B" SIZE: 16MM THICK × 1250 × 2500/2800 MM LONG

MS PLATE 16 MM IS-2062 GR "B" SIZE: 16MM THICK × 1250 × 2500/2800 MM LONG

MS PLATE 12 MM THICK × 1000 × 2000 MM OR STD. SIZE SPECN. IS:2062 GR "B"

MS PLATE 12 MM THICK × 1000 × 2000 MM OR STD. SIZE SPECN. IS:2062 GR "B"

MS PLATE 10MM THICK × 1250/1500 × 5000 MM SPECN IS:2062 GR A/B

MS PLATE 10MM THICK × 1250/1500 × 5000 MM SPECN IS:2062 GR A/B

MS PLATE 8 MM THICK X 1500 X 4500/5000 MM SPECN IS:2062 GR. B OR ALTERNATE IS-2062 GR. C

MS PLATE 8 MM THICK X 1500 X 4500/5000 MM SPECN IS:2062 GR. B OR ALTERNATE IS-2062 GR. C

MS PLATE 6MM×1250×5000/6300 MM SPECN-IS:2062 GR "B"

MS PLATE 6MM×1250×5000/6300 MM SPECN-IS:2062 GR "B"

MS PLATE 5.00 MM THICK X 1400 OR 1500 X 4500 OR 5000 MM SPECN:- IS: 2062 GR. A/B

MS PLATE 5.00 MM THICK X 1400 OR 1500 X 4500 OR 5000 MM SPECN:- IS: 2062 GR. A/B

MS SHEET 2.00 MM THICK × 1250 × 2500 MM IS-1079 GR O (SK) B.C. 01.3202.0020

MS SHEET 2.00 MM THICK × 1250 × 2500 MM IS-1079 GR O (SK) B.C. 01.3202.0020

STL SHT ST V-23 1MM THICK

STL SHT ST V-23 1MM THICK

HR SHEET 4.00MM ×1250×2500 IS 1079 GR "O" (SK)

HR SHEET 4.00MM ×1250×2500 IS 1079 GR "O" (SK)

HR SHEET 3.15MM THICK ×1000/1250×2500 IS 5986, Fe 330 OR IS:1079 GR. "O"

HR SHEET 3.15MM THICK ×1000/1250×2500 IS 5986, Fe 330 OR IS:1079 GR. "O"

REAR GLASS (WITH RUBBER BEADING)

REAR GLASS (WITH RUBBER BEADING) PART NO 640-10-1015/B

640-10-1015/B

SIDE GLASS (WITH RUBBER BEADING)

SIDE GLASS (WITH RUBBER BEADING) PART NO 640-10-1014/B

640-10-1014/B

CO DRIVER SIDE GLASS (WITH RUBBER BEADING)

CO DRIVER SIDE GLASS (WITH RUBBER BEADING) PART NO 640-10-1013/B

640-10-1013/B

DRIVER SIDE GLASS (WITH RUBBER BEADING)

DRIVER SIDE GLASS WITH RUBBER BEADING PART NO 640-10-1012/B

640-10-1012/B

WIND SHIELD GLASS (WITH RUBBER BEADING)

WIND SHIELD GLASS PART NO. 640-10-1011/B

640-10-1011/B

REAR GLASS (WITH RUBBER BEADING) (ARMY) MPV 645-10-1015(I)

REAR GLASS (WITH RUBBER BEADING) (ARMY) MPV 645-10-1015(I)

645-10-1015(I)

SIDE GLASS GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1014-(I)

SIDE GLASS GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1014-(I)

645-10-1014-(I)

CO-DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1013-(I)

CO-DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1013-(I)

645-10-1013-(I)

DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1012-(I)

DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1012-(I)

645-10-1012-(I)

WIND SHIELD GLASS (ARMY) MPV (645-10-1011-(I) (WITH RUBBER BEADING)

WIND SHIELD GLASS (ARMY) MPV (645-10-1011-(I) (WITH RUBBER BEADING)

645-10-1011-(I)

JACKAL ARMOUR PLATE, A-CATEGORY, SIZE: 4 x 1500 x 6000 MM HIGH HARDNESS TO 477-530 BHN, SPECN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM AK-47 FROM A DISTANCE OF 10 MTRES AS PER BP R&D , SPECIFICATION: 52/01D/97-DD(W)-01(REV).

JACKAL ARMOUR PLATE, A-CATEGORY, SIZE: 4 x 1500 x 6000 MM HIGH HARDNESS TO 477-530 BHN, SPECN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM AK-47 FROM A DISTANCE OF 10 MTRES AS PER BP R&D , SPECIFICATION: 52/01D/97-DD(W)-01(REV).

"MIDHANI MAKE" MDN 45'PLATE, SIZE:6MM×1800×6000MM, HIGH HARDNESS TO 477-530 BHN, PHYSICAL PROPOERTIES AS PER SPCN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM 7.62 SLR AT A DISTANCE OF 10 MTRS AS PER BP R&D PECIFICATION: 52/01D/97-DD(W)-01(REV)

"MIDHANI MAKE" MDN 45'PLATE, SIZE:6MM×1800×6000MM, HIGH HARDNESS TO 477-530 BHN, PHYSICAL PROPOERTIES AS PER SPCN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM 7.62 SLR AT A DISTANCE OF 10 MTRS AS PER BP R&D PECIFICATION: 52/01D/97-DD(W)-01(REV)

COMPOSITE ARMOUR (RHS) & (LHS) AS PER DRG NO. 645-15-1-1 TO 15/F

COMPOSITE ARMOUR (RHS) & (LHS) AS PER DRG NO. 645-15-1-1 TO 15/F and SPECIFICATION NO. OFPM/R&D/SP/COMPOSITE - ARMOUR/07 DT. 16.03.2007 Amendment No.: 04 Dt. 02.03.2019

645-15-1-1 TO 15/F

• AS PER SPECIFICATION

• AS PER SPECIFICATION & QAP

PLATE SIZE:24MMX1800X6300MM SPADE M1 HEAT TREATE ARMOUR SPECN:CQA(M)-51 WITH 270-350 BHN,UTS-95KGF/SQMM(MIN) ELONGATION 13%(MIN),IMPACT-60 JOULES AT ROOM TEMPT(MIN)

PLATE SIZE:24MMX1800X6300MM SPADE M1 HEAT TREATE ARMOUR SPECN:CQA(M)-51 WITH 270-350 BHN,UTS-95KGF/SQMM(MIN) ELONGATION 13%(MIN),IMPACT-60 JOULES AT ROOM TEMPT(MIN)

PLATE SIZE:16MM×1800×6300MM PLATE SIZE:16MM×1800×6300MM SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN)

PLATE SIZE:16MM×1800×6300MM PLATE SIZE:16MM×1800×6300MM SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN)

PLATE SIZE:12MM×1800×6300MM SPADE M1 HEAT TREATED ARMOUR SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN)

PLATE SIZE:12MM×1800×6300MM SPADE M1 HEAT TREATED ARMOUR SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN)

LEVER HOLDER FOR 12 BORE PUMP ACTION GUN, RFI DRG. NO. PAG-0012*

LEVER HOLDER FOR 12 BORE PUMP ACTION GUN, RFI DRG. NO. PAG-0012*

RFI DRG. NO. PAG-0012*

INVESTMENT CASTING OF RETAINER SPRING RECOIL(MODIFIED)AS PERTG/EME.NEW DELHI. TO RFI SK NO.8064-S. FOR RIFLE 5.56 MM INSAS.

INVESTMENT CASTING OF RETAINER SPRING RECOIL(MODIFIED)AS PERTG/EME.NEW DELHI. TO RFI SK NO.8064-S. FOR RIFLE 5.56 MM INSAS.

AS PERTG/EME.NEW DELHI. TO RFI SK NO.8064-S.

DEFLECTION PLATE ASSY TO DRG NO 675 51 cd 142 Cb ALONG WITH DETAILS DEFLECTION PLATE LAYOUT TO DRG NO 675 51 209 675 51 210

DEFLECTION PLATE ASSY TO DRG NO 675 51 cd 142 Cb ALONG WITH DETAILS DEFLECTION PLATE LAYOUT TO DRG NO 675 51 209 675 51 210

675 51 cd 142 Cb ALONG WITH DETAILS DEFLECTION PLATE LAYOUT TO DRG NO 675 51 209 675 51 210

THINNER FOR SYNTHETIC PAINTS TO SPECN. IS-1872

THINNER FOR SYNTHETIC PAINTS TO SPECN. IS-1872

ACRALKD MATT FINISH QD PAINT AS PER TELCO SPEC.SS:7335A COLOUR SCAMIC TO IS :5-91 COLOUR SHADE NO 294

ACRALKD MATT FINISH QD PAINT AS PER TELCO SPEC.SS:7335A COLOUR SCAMIC TO IS :5-91 COLOUR SHADE NO 294

AS PER TELCO SPEC.SS:7335A COLOUR SCAMIC TO IS :5-91 COLOUR SHADE NO 294

PAINT RFU PRIMING REDOXIDE OF IRON & ZINC CHROMATE UNIVERSAL SYNTHETIC BRUSHING/SPRAYING TO SPECIFICATION JSS-3-47-13 CAT.NO.H1 (A)/8010-000110

PAINT RFU PRIMING REDOXIDE OF IRON & ZINC CHROMATE UNIVERSAL SYNTHETIC BRUSHING/SPRAYING TO SPECIFICATION JSS-3-47-13 CAT.NO.H1 (A)/8010-000110

SPECIFICATION JSS-3-47-13 CAT.NO.H1 (A)/8010-000110

PAINT ENAMEL RFU SYNTHETIC EXTERIOR FINISHING BRUSHING GOLDEN YELLOW I.S COLOUR NO. 356 MAKE SHALIMAR/ASIAN/BERGER/BOMBAY/J&N/GOODLESS/NEROLAC AND PACKED IN 20 LTR M.S. DRUM

PAINT ENAMEL RFU SYNTHETIC EXTERIOR FINISHING BRUSHING GOLDEN YELLOW I.S COLOUR NO. 356 MAKE SHALIMAR/ASIAN/BERGER/BOMBAY/J&N/GOODLESS/NEROLAC AND PACKED IN 20 LTR M.S. DRUM

I.S COLOUR NO. 356 MAKE SHALIMAR/ASIAN/BERGER/BOMBAY/J&N/GOODLESS/NEROLAC AND PACKED IN 20 LTR M.S. DRUM

Spring Washer B 5 I.S. 3063

Spring Washer B 5 I.S. 3063

I.S. 3063

Snap Head Rivet 6X30 to IS: 2155

Snap Head Rivet 6X30 to IS: 2155

IS: 2155

SLOTTED CHEESE HEAD SCREW M5 X 15 LENGTH DRG. NO. S-1818 FOR ASSY. ERA CONTAINER

SLOTTED CHEESE HEAD SCREW M5 X 15 LENGTH DRG. NO. S-1818 FOR ASSY. ERA CONTAINER

DRG. NO. S-1818 FOR ASSY. ERA CONTAINER

SLOTTED CHEESE HEAD SCREW M5 X 25 LENGTH DRG. NO. S-1822 FOR ERA BOX

SLOTTED CHEESE HEAD SCREW M5 X 25 LENGTH

DRG. NO. S-1822 FOR ERA BOX

SLOTTED CHEESE HEAD SCREW M5X35 LENGTH DRG.NO. S-1817, S-1819, S-1820 & S-1821 FOE ERA BOX (CONTAINER)

SLOTTED CHEESE HEAD SCREW M5X35 LENGTH DRG.NO. S-1817, S-1819, S-1820 & S-1821 FOE ERA BOX (CONTAINER)

DRG.NO. S-1817, S-1819, S-1820 & S-1821 FOE ERA BOX (CONTAINER)

FLAT 40 X 25 IN STD LENGT & SR 25 IS: 2062/1992

FLAT 40 X 25 IN STD LENGT & SR 25 IS: 2062/1992

IS: 2062/1992

CR SHEET 1.60X1250X2500 MM IS: 513 GR "D" SK

CR SHEET 1.60X1250X2500 MM IS: 513 GR "D" SK

IS: 513 GR

5.3mm +-0.3 HIGH STRENGTH STEEL SHEET TO DMRL-1750 HYDERABAD (SPCN. NO. CQA (M)-54-1997 UPDATED ON 06-02-2002)

5.3mm +-0.3 HIGH STRENGTH STEEL SHEET TO DMRL-1750 HYDERABAD (SPCN. NO. CQA (M)-54-1997 UPDATED ON 06-02-2002)

SPCN. NO. CQA (M)-54-1997 UPDATED ON 06-02-2002

STRETCHER (MEDICAL PURPOSE) SPECN. NO. OFPM/R&D/SP/MPV/ STRETCHER MEDICAL PURPOSE FOR MPV/015

STRETCHER (MEDICAL PURPOSE) SPECN. NO. OFPM/R&D/SP/MPV/ STRETCHER MEDICAL PURPOSE FOR MPV/015

FRP. DASH BOARD (ARMY VERSION) DRG. NO. 645-01-3321-1/A

FRP. DASH BOARD (ARMY VERSION) DRG. NO. 645-01-3321-1/A

645-01-3321-1/A