STEEL BRIGHT BAR DIA 3.0 MM TO SPCN IS:7283-92, GR10C8S10 OF IS:4431-78 (LF: 99227073600)

STEEL BRIGHT BAR DIA 3.0 MM TO SPCN IS:7283-92, GR10C8S10 OF IS:4431-78 (LF: 99227073600)

SPRING STEEL SHEET SIZE 0.50MM THICK TO SPCN IS:2507, 80C6 IN RUNNING LENGTH 1 TO 2 MTR. X 0.500 WIDE

SPRING STEEL SHEET SIZE 0.50MM THICK TO SPCN IS:2507, 80C6 IN RUNNING LENGTH 1 TO 2 MTR. X 0.500 WIDE

AL. ALLOY SHEET SIZE 0.8MM THICK TO SPCN IS:737, GR. 24345, INWP CONDITION X 500 MM W X 2500 MM LONG (LF:9927073485)

AL. ALLOY SHEET SIZE 0.8MM THICK TO SPCN IS:737, GR. 24345, INWP CONDITION X 500 MM W X 2500 MM LONG (LF:9927073485)

TOOL STL. SHT. AS PER IS:3748:90, GR. 80T3, 12MM TH. X 500MM WIDE X 2 MTRS. AND ABOVE (LF:0202002012)

TOOL STL. SHT. AS PER IS:3748:90, GR. 80T3, 12MM TH. X 500MM WIDE X 2 MTRS. AND ABOVE (LF:0202002012)

MEDIUM CARBON STEEL SHEET 25MM THICK X 250MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8, (LF:0143022026)

MEDIUM CARBON STEEL SHEET 25MM THICK X 250MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8, (LF:0143022026)

MEDIUM CARBON STEEL SHEET SIZE 20MM THICK X 300 MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8 (LF:0143022020)

MEDIUM CARBON STEEL SHEET SIZE 20MM THICK X 300 MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8 (LF:0143022020)

STEEL SHT. GR. 'DD' IS513:94 SIZE 1MM THICK X 300 X 1000 MM (LF: 0133023010)

STEEL SHT. GR. 'DD' IS513:94 SIZE 1MM THICK X 300 X 1000 MM (LF: 0133023010)

STEEL ROD DIA 15MM GR. 14C14S14 TO IS 4431:78 (LF-0131002016)

STEEL ROD DIA 15MM GR. 14C14S14 TO IS 4431:78 (LF-0131002016)

HAMMER FOR 12 BORE PAG, DRG.NO. PAG-0060A THROUGH MIM ROUTE

HAMMER FOR 12 BORE PAG, DRG.NO. PAG-0060A THROUGH MIM ROUTE

DRG.NO. PAG-0060A

TRIGGER FOR 12 BORE PAG, DRG.NO. PAG-0033 THROUGH MIM ROUTE

TRIGGER FOR 12 BORE PAG, DRG.NO. PAG-0033 THROUGH MIM ROUTE

DRG.NO. PAG-0033

BREECH SLIDE LOCKFOR 12 BORE PAG, DRG. NO. PAG-0027 THROUGH MIM ROUTE

BREECH SLIDE LOCKFOR 12 BORE PAG, DRG. NO. PAG-0027 THROUGH MIM ROUTE

DRG. NO. PAG-0027

BREECH BLOCK SLIDE FOR 12 BORE PAG, DRG.NO. PAG-0065B THROUGH MIM ROUTE

BREECH BLOCK SLIDE FOR 12 BORE PAG, DRG.NO. PAG-0065B THROUGH MIM ROUTE

DRG.NO. PAG-0065B

MAGAZINE CAP FOR 12 BORE PAG, DRG.NO. PAG-0018 THROUGH MIM ROUTE

MAGAZINE CAP FOR 12 BORE PAG, DRG.NO. PAG-0018 THROUGH MIM ROUTE

DRG.NO. PAG-0018

TRIGGERING PIN CATCH FOR 12 BORE PAG, DRG.NO. PAG-0038 THROUGH MIM ROUTE

TRIGGERING PIN CATCH FOR 12 BORE PAG, DRG.NO. PAG-0038 THROUGH MIM ROUTE

DRG.NO. PAG-0038

STEEL ROD 15MM DIA HR, ANNEALED COND. TO SPECN. BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED. IN STRAIGST LENGTH. FOR PIN FIRING OF TGG.

SPECN. BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED.

STEEL ROD 8MM DIA, HR, ANNEALED COND. TO SPECN. BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED.IN STRAIGHT LENGTH, FOR PIN FIRING OF PAG & 0.32" PISTOL.

BS:970, PT1 1983 GD. 835 M-30 (EN-30B)

STEEL ROD 6 MM DIA CD., 2M OR 2.5M STRAIGHT IN LENGTH TO BS: 970, PT-I,1983 GD.835, M-30(EN-30B). VACCUM DEGASSED. FOR PIN FIRING OF 7.62 MM RIFLE GHATAK.

BS: 970, PT-I,1983 GD.835, M-30(EN-30B). VACCUM DEGASSED.

STEEL ROUND 4 -0.1MM DIA. HR, ANNEALED COND. TO SPCN.BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED, IN STRAIGHT LENGTH 2 TO 3 M LONG.

SPCN.BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED,

PROV. SPECN.NO. DMSRDE/T&GS/2005/NBC/02(a)

PROV. SPECN.NO. DMSRDE/T&GS/2005/NBC/02(a)

Impact Protector Left to Drg No F1303-026871 for 84mm RL Mk-III

AS PER DRAWING

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Arm to Casting Drg. No. D-4082388

As per Drg. No. D-4082388

D-4082388

Holder to investment casting to Drg . No. D-4082393/1

As per Drg . No. D-4082393/1

D-4082393/1

DUCK NYLON 230 GM STEEL GREY 91.4 CM WIDTH

SPECN.NO.ADRDE/SPECN./1984/23(d)

• As per Specification/Drawing

• As per Specification/Drawing

THREAD SEWING NYLON LIGHT OG VARIETY NO. L- 2. 3 STAND OG (BL-35N(MIN)) SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2).

SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2).

IND/ENG/PROV/0732(a)

IND/ENG/PROV/0732(a)

IND/ENG/PROV/1221/a

IND/ENG/PROV/1221/a

SUPPLY OF BLOCK EJECTOR ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.

AS PER ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.

ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR

PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR

K 7040 STAR

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 WITH FIRM'S MATERIAL

AS PER DRG NO K 4110 WITH FIRM'S MATERIAL

K 4110

CONTROL BOCK TO DRG NO AL5139107 FOR BLOCK D (LF 7440200315)

CONTROL BOCK TO DRG NO AL5139107 FOR BLOCK D (LF 7440200315)

MASK AK-630 ASSY. 103

MASK AK-630 ASSY. 103

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STAINLESS STEEL WIRE 0.381MM DIA AS PER MSCQ-5 SPECIFICATION NO. 03 ISSUE NO. 01 DATED 16/05/2006

STAINLESS STEEL WIRE 0.381MM DIA AS PER MSCQ-5 SPECIFICATION NO. 03 ISSUE NO. 01 DATED 16/05/2006

DEVELOPMENT, MANUFACTURE, SUPPLY AND PROVING OF THE 29 SUB ASSEMBLIES OF HYDRAULIC SYSTEM FOR 155 MM GUN

DEVELOPMENT, MANUFACTURE, SUPPLY AND PROVING OF THE 29 SUB ASSEMBLIES OF HYDRAULIC SYSTEM FOR 155 MM GUN

POWER UNIT (FEED UNIT) AK-630 ASSY.107

POWER UNIT (FEED UNIT) AK-630 ASSY.107

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Slide to Casting Drg No. D-6385161

Slide to Casting Drg No. D-6385161

D-6385161

Feeder Lever ( Investment Casting) Drg No. D-5178461

Feeder Lever ( Investment Casting) Drg No. D-5178461

D-5178461

Housing to Casting Drg No. D-5178463

Housing to Casting Drg No. D-5178463

D-5178463

Arm to Drg No. D-6358150

Arm to Drg No. D-6358150

D-6358150

Case investment casting Drg No. D-3053751

Case investment casting Drg No. D-3053751

D-3053751

Magazine Cover Drg No. D-3054626

Magazine Cover Drg No. D-3054626

D-3054626

Arm to Investment Casting Drg No. D-4082394

Arm to Investment Casting Drg No. D-4082394

D-4082394

Arm to investment casting Drg. no. D-4082416

As per Drg. No. D-4082416

D-4082416

Twin Container Assy (without lable) to DRG No IRCL-494 for sub calibre adaptor 219.9 mm to dc(I) no. 18834-w DT. 20-12-03

AS PER DRAWING

STAINLESS STEEL STRIP TO THICKNESS 0.051 mm TO SPECN. SANDVIK 11 R 51 EXTRA HARD ROLLED. ALT. MATL. IS:6911-1922 GRADE X 04 CR.19 NI 9 COLD ROLLED CONDITION

STAINLESS STEEL STRIP TO THICKNESS 0.051 mm TO SPECN. SANDVIK 11 R 51 EXTRA HARD ROLLED. ALT. MATL. IS:6911-1922 GRADE X 04 CR.19 NI 9 COLD ROLLED CONDITION

• AS PER ATTACHMENT

• AS PER ATTACHMENT

GLASS SLAB BF-108

GLASS SLAB BF-108 SIZE:MULTIPLE OF 50 X MULTIPLE OF 50 MM X 50 MM,MAXIMUM SLAB SIZE = 350 X 300 X 50 MM,RADIATION RESISTANT GLASS, REFRACTIVE INDEX ND = 1.582713,ABBE VALUE VD=46.47,OTHER CHARACTERISTICS AS PER SPECN NO. OLF/OPT-GLASS/ SPEC/03-2.DENSITY=3.28 GM/CC.

LENS-3

LENS-3 TO IRDE DRG NO: 138100000201 Go9 FOR DRIVER THERMAL IMAGER (DTI) OF T-90 TANK

LENS-2

LENS-2 TO IRDE DRG NO: 138100000201 Go8 FOR DRIVER THERMAL IMAGER (DTI) OF T-90 TANK

LENS-1

LENS-1 TO IRDE DRG NO: 138100000201 Go7 FOR DRIVER THERMAL IMAGER (DTI) OF T-90 TANK

ADHESIVE TYPE -B

IND/ENG/PROV/1193/d

• As Per Specification/Drawing

• As Per Specification/Drawing

CANVAS COTTON 407 GM LOD 105 CM

IND/ADE/0087 (a) Except That 1-Weight, gsm – A tolerance of +-10% shall be applicable to 407 gsm after waterproofing. 2-Count of yarn :-Warp :-2 ply of 20s Single yarn Weft :-3 ply of 24s Single yarn (Note: The count of single yarn is approximate and given for the guidance of the manufacturers. The no. of plies, however, shall not be changed.) 3-No. of threads/ inch:- Warp:-92 Weft:-48 (The tolerance in no. of threads/inch shall be +- 5%) 4-Shade OD (Olive Drab), Shade No. 298 as per IS:5

• As per Drawing/Specification

• As per Drawing/Specification

SPECIFICATION NO. : ADRDE/SPECN/82.

SPECIFICATION NO. : ADRDE/SPECN/82.

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

BLANKS FOR BODY CASTING TO GSF DRG. NO. C-1946H DT. 25/04/17

BLANKS FOR BODY TO GSF DRG. NO. C-1946H DT. 25/04/17

C-1946 H

• AS PER ATTACHMENT

• AS PER ATTACHMENT

MACHINED BODY FOR RIFLE 5.56MM ASSAULT RIFLE/EX-CALIBUR, DRG. NO. RF/SK. 9730

BS 970 Pt. 1-1983, 817 M-40 T (BS:970 En24 T)

DRG. NO. RF/SK 970

Cord Nylon Various

Specification No. JSS:4020-9:2013 (Revision No. 3)

i. Sewing Thread Spun Polyester ii. Sewing Thread Cotton

(1). As per Specification No. IND/TC/0296 (b) (2). As per Specification No. IS:9543-1980 (3). As per Specification No. IS:1720-1978

As per the Specification

(1). As per Specification No. CQA(GS)/US/460 and (2.) As per Specification No. IS: 2771

Sizes as per requirement

1. Button made from Polyester 2. Buttons made from Plastic

As per Specification No. IS:1461-1984 (reaffirmed 2003) in various sizes and shapes as per requirement with material - Plastic or Polyester as per requirement specified.

ALLUMINIUM ROD 40MM X 145MM LONG DTD 5124/AA7075 FOR RAW MATERIAL OF BARREL SLEEVE MUZZLE ATTACHMENT OF 12 BORE PUMP ACTION GUN.

MATERIAL:-DTD 5124/AA7075

ALLUMINIUM ROD 90MM X 155MM LONG DTD 5124/AA7075 FOR ROW MATERIAL OF BARREL MUZZLE ATTACHMENT OF 12 BORE PUMP ACTION GUN.

MATERIAL:-DTD 5124/AA7075

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380,& MCT-1641/1.

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380,& MCT-1641/1.

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-138

AS PER SPECIFICATION

AS PER SPECIFICATION

FRP CASE CARRYING TO DRG NO.IRDE-2606(COMPLETE) MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)

FRP CASE CARRYING TO DRG NO.IRDE-2606(COMPLETE) MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)

FRP CASE CARRYING TO DRG NO.IRDE-2606(COMPLETE) MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)

PRESSURE DIE CASTING TO HOLDER SE-2P, DRG. NO. B-30/DC/8212017/83

PRESSURE DIE CASTING TO HOLDER SE-2P, DRG. NO. B-30/DC/8212017/83

DRG. NO. B-30/DC/8212017/83

MBEU/7074 PA -- HARDSHELL CONTAINER FOR JAGUAR PILOT PARA.

DRG. NO. ADRDE/1454-00(b)

DRG. NO. ADRDE/1454-00(b)

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

THREAD SEWING NYLON '66' Bonded BS: 4.5 Kgf. Navy Blue

Spec.No.ADRDE/TDTM/TH/2009/1(c) Dtd:-20.05.21, Shade No. 106 AS PER IS-5-1994 THE THREAD SHOULD BE BONDED THREAD

• As per Specification

• As per Specification

PULLY SMALL Prov.Drg. NO. ADRDE/172(b).

Prov. Drg. NO. ADRDE/172(b).

Prov.Drg. NO. ADRDE/172(b).

QUICK RELEASE LOCK TP WITH BUCKLES

DRG.NO.-ADRDE/PAS/2007/16.

DRG.NO.-ADRDE/PAS/2007/16.

• As per Specification/Drawing

• As per Specification/Drawing

SPECIFICATION NO. : ADRDE/SPECN/1983/12(a). 50 MTR ROLL LENGTH EXCLUDING SAMPLING

SPECIFICATION NO. : ADRDE/SPECN/1983/12(a). 50 MTR ROLL LENGTH EXCLUDING SAMPLING

SPECIFICATION NO.: ADRDE/SPECN/1983/12(a) 50 MTR ROLL LENGTH EXCLUDING SAMPLING

SPECIFICATION NO.: ADRDE/SPECN/1983/12(a) 50 MTR ROLL LENGTH EXCLUDING SAMPLING

CORD NYLON BRAIDED 2452-N / 250 KGS

SPECIFICATION NO. : JSS-4020-8

PLASTIC MOULDING BOX FOR 5.56MM ASSAULT RIFLE & GHAATAK,

MATERIAL:-SEE NOTE

DRG. NO. RFI SK 9941

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D LF 7440200208

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

As per Requirements & Specifications

As per Requirements & Specifications

BEARING 5-1000095K TO SPCN TY 4479-73 FOR HEAD OF T-90

TY 4479-73

BEARING 5-1006 TO SPCN. TU 4479-73 FOR HEAD OF T-90

TU 4479-73

BALL BEARING BALL 2.5-100 TO GOST NO. 3722-81 FOR HEAD T-90

GOST 3722-81

BALL BEARING BALL 3.175-40 TO GOST NO. 3722-81 FOR HEAD OF T-90

GOST 3722-81

BEARING 0-1000094 TO GOST NO. 8338-75 FOR HEAD OF T-90

GOST 8338-75

BEARING 0-1000906, GOST 8338-75 SINGLE ROW BALL BEARING SIZE- 30x47x9MM, OPEN TYPE, CLASS OF ACCURACY - 0,

AS PER GOST 8338-75