SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET
Specification
SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET
LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL FOR W/T- 2/SET. ETC. CONSISTING OF ITEMS SL. NO. 1 TO 22 AS PER SHEET ATTACHED
Specification
LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL FOR W/T- 2/SET. ETC. CONSISTING OF ITEMS SL. NO. 1 TO 22 AS PER SHEET ATTACHED
PCB(DOUBLESIDED PTH) DRG: AU7.820.043 & SPCN:OLF/MSD/PCB/01/MODCONDITINS:-1-PCB SHOULD BE AS PER JSS-52308.(2)-PTH BASEMATERIAL-GLASS EXPOXY BASE, COPPER CLAD GRADE GF.(3) THICKNESSOF BASE -1.5MM & COPPER FOIL THICKNESS 50 MICRO MTR. (4) PCBTINPLATED WITH PROVISION OF GREEN MASKING (5) SIZE-50X47.5MMSQ
Specification
PCB(DOUBLESIDED PTH) DRG: AU7.820.043 & SPCN:OLF/MSD/PCB/01/MODCONDITINS:-1-PCB SHOULD BE AS PER JSS-52308.(2)-PTH BASEMATERIAL-GLASS EXPOXY BASE, COPPER CLAD GRADE GF.(3) THICKNESSOF BASE -1.5MM & COPPER FOIL THICKNESS 50 MICRO MTR. (4) PCBTINPLATED WITH PROVISION OF GREEN MASKING (5) SIZE-50X47.5MMSQ
P.C.B. SMOTP DOUBLE SIDED, PTH DRG NO. OLF/EPS/TVNE-4B/SMD, GLASS EPOXY BORAD OF THICKNESS 2 MM AND COPPER FOILTHICKNESS 50 MICROMETER AS PER SPCN. NO. OLF/MSD/PCB/01/MOD AND CONFORMING TO JSS-52301, SIZE 82.37 MM X 43MM.
Specification
P.C.B. SMOTP DOUBLE SIDED, PTH DRG NO. OLF/EPS/TVNE-4B/SMD, GLASS EPOXY BORAD OF THICKNESS 2 MM AND COPPER FOILTHICKNESS 50 MICROMETER AS PER SPCN. NO. OLF/MSD/PCB/01/MOD AND CONFORMING TO JSS-52301, SIZE 82.37 MM X 43MM.
PCB FOR RMU SIZE -127MMX71MM AS PER DRG. NO. OLF/RMU/COUNTERCARD/RUS. DOUBLE SIDED PTH PCB SHOULD BE MADE ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 50 MICROM. , CONFIRMING TO SPECIFICATION OLF/MSD/PCB/01/MOD & JSS-52301
Specification
PCB FOR RMU SIZE -127MMX71MM AS PER DRG. NO. OLF/RMU/COUNTERCARD/RUS. DOUBLE SIDED PTH PCB SHOULD BE MADE ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 50 MICROM. , CONFIRMING TO SPECIFICATION OLF/MSD/PCB/01/MOD & JSS-52301
PCB SMOTP DOUBLE SIDED, PTH, PCB, AS PER DRG. NO. AF7.102.187ON GLASS EXPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOILTHICKNESS 35 MICROMETER, AND AS PER SPECIFICATION NO. OFL/MSD/PCB/01/MOD, AND CONFORM TO JASS-52301, PCB SIZE-100X47 SQMM
Specification
PCB SMOTP DOUBLE SIDED, PTH, PCB, AS PER DRG. NO. AF7.102.187ON GLASS EXPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOILTHICKNESS 35 MICROMETER, AND AS PER SPECIFICATION NO. OFL/MSD/PCB/01/MOD, AND CONFORM TO JASS-52301, PCB SIZE-100X47 SQMM
PCB-SMOTP DOUBLE SIDED PTH AS PER DRG. NO. OLF/A-II/PCB/PAS/BPK2 (NEW) ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 35 MICROMETER , CONFIRMING TO JSS 52301 AND AS PER SPECN. NO. OLF/MSD/PCB/01/MOD SIZE 94.5X71.63 SQMM
Specification
PCB-SMOTP DOUBLE SIDED PTH AS PER DRG. NO. OLF/A-II/PCB/PAS/BPK2 (NEW) ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 35 MICROMETER , CONFIRMING TO JSS 52301 AND AS PER SPECN. NO. OLF/MSD/PCB/01/MOD SIZE 94.5X71.63 SQMM
OVER MOULDING HOUSING SIGHT ASSY AS PER DRG.NO. TEND 2363 REQUIRED FOR 40mm UBGL. (Component will be supplied by OFT on which moulding at both ends have to be carried out by firm)
firm)