CONVERSION OF AL.ALLOY ROUND BAR 28 MM DIA TO SPECN.IS:733 - 1983 GR.24345 IN "WP" WITH 8% MIN ELONGATION BY PEELING & GRINDING TO AL.ALLOY ROUND BAR 20 MM DIA -0.05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR LENGTH

CONVERSION OF AL.ALLOY ROUND BAR 28 MM DIA TO SPECN.IS:733 - 1983 GR.24345 IN "WP" WITH 8% MIN ELONGATION BY PEELING & GRINDING TO AL.ALLOY ROUND BAR 20 MM DIA -0.05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR LENGTH

AL.ALLOY ROUND BAR 20 MM DIA -0.05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR LENGTH

AL.ALLOY ROUND BAR 20 MM DIA -0.05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR LENGTH

ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" 8% MIN ELONGATION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 20 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS

ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" 8% MIN ELONGATION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 20 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS

TRACER BODY TO DRG NO.F-1334-154780-D DC-36534-A DTD.6/3/99 FOR 84 MM CARL GUSTAF.

TRACER BODY TO DRG NO.F-1334-154780-D DC-36534-A DTD.6/3/99 FOR 84 MM CARL GUSTAF.

CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA

CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA

CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.

CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.

NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14

NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14

SKIRT RING TO OFAJ DRG. NO.FS-517 A

SKIRT RING TO OFAJ DRG. NO.FS-517 A

SEALING WASHER TO OFAJ DRG.NO.FS-514 G

SEALING WASHER TO OFAJ DRG.NO.FS-514 G

TOP WASHER TO OFAJ DRG. NO. FS-513F.

DRG. NO. FS-513F.

DRG. NO. FS-513F.

WASHER NOZZLE TO OFAJ DRG NO FS 518B

WASHER NOZZLE TO OFAJ DRG NO FS 518B

HEAT TREATMENT OF ROLL PIN TO OFAJ DRG.NO.FS-3022 IN TO ROLLPIN TO OFAJ DRG.NO.FS-516A WITHOUT SURFACE TREATMENT ON CONVERSION BASIS

HEAT TREATMENT OF ROLL PIN TO OFAJ DRG.NO.FS-3022 IN TO ROLLPIN TO OFAJ DRG.NO.FS-516A WITHOUT SURFACE TREATMENT ON CONVERSION BASIS

ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT

ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT

• PQ ATTACHED

• PQ ATTACHED

ROLL PIN TO OFAJ DRG. NO.FS-516 A

ROLL PIN TO OFAJ DRG. NO.FS-516 A

• ATTACHED

• ATTACHED

'O' RING TO OFAJ DRG. NO.FS-519 D

'O' RING TO OFAJ DRG. NO.FS-519 D

COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN.IS:737 DESGN-24345 IN 'T6' CONDITION.SIZE: 3.5 +0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH (ITEM CODE: 0611525036)

COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN.IS:737 DESGN-24345 IN 'T6' CONDITION.SIZE: 3.5 +0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH

CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN.BS970 (PART-I)1983GRADE 410S21 (EN56A)WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 - 0.08 MM DIA

CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN. BS970 (PART-I)1983 GRADE 410S21 (EN56A) WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 - 0.08 MM DIA

PACKING CARTON TO OFAJ DRG. NO. FS-835 E FOR MOTOR TUBE

PACKING CARTON TO OFAJ DRG. NO. FS-835 E FOR MOTOR TUBE

EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG

EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG

SILVER PLATING OF CONNECTING PINS OF 68 MM ARROW ROCKET TOSPECIFICATION DTD 919 B AS DETAILED IN DRG.NO. ARDE 1135.

SILVER PLATING OF CONNECTING PINS OF 68 MM ARROW ROCKET TOSPECIFICATION DTD 919 B AS DETAILED IN DRG.NO. ARDE 1135.

LEADED BRASS ROUND TO SPECN.BS:2874 (LATEST ISSUE) GR.CZ-121PB 3 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRSSIZE: 3.658 -0.05 MM DIA

LEADED BRASS ROUND TO SPECN.BS:2874 (LATEST ISSUE) GR.CZ-121PB 3 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRSSIZE: 3.658 -0.05 MM DIA

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN "M"CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE:- 3.00 +/- 0.04 MM DIA.

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN "M"CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE:- 3.00 +/- 0.04 MM DIA.

CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2395D FOR ILLU BASE

CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2395D FOR ILLU BASE

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO. FS-2377E FOR ILLU. SHELL BODY.

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO. FS-2377E FOR ILLU. SHELL BODY.

DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG.

DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG.

CONVERSION OF AL. ALLOY TUBE OD 88 X ID 60 (ITEM CODE : 170095PR46) TO BLANKS FOR ILLU SHELL BODY TO DRG. NO. FS-2915A

CONVERSION OF AL. ALLOY TUBE OD 88 X ID 60 (ITEM CODE : 170095PR46) TO BLANKS FOR ILLU SHELL BODY TO DRG. NO. FS-2915A

CONVERSION OF AL.ALLOY TUBE 60.00 +/-0.5 MM ID & 13.00 +1.0O mm TH.TO BLANKS FOR ILLU. SHELL BODY TO DRG.NO. FS-2915.

CONVERSION OF AL.ALLOY TUBE 60.00 +/-0.5 MM ID & 13.00 +1.0O mm TH.TO BLANKS FOR ILLU. SHELL BODY TO DRG.NO. FS-2915.

AL.ALLOY TUBE TO OFAJ DRAWING NO.SK-1410 FOR ILLU SHELL BODY

AL.ALLOY TUBE TO OFAJ DRAWING NO.SK-1410 FOR ILLU SHELL BODY

ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002.

ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002.

GROUND STAINLESS STEEL ROD TO SPECIFICATION BS 970:PT-1:1983 GRADE 303S31 SIZE:- 8 MM -0.07 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION BS 970:PT-1:1983 GRADE 303S31 SIZE:- 8 MM -0.07 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4305-AT SIZE: 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4305-AT SIZE: 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4523+QT SIZE:- 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4523+QT SIZE:- 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

COLD ROLLED ALUMINIUM ALLOY SHEETS TO OFAJ SPECN. CC-388, SIZE: 10.3 + 0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG.

COLD ROLLED ALUMINIUM ALLOY SHEETS TO OFAJ SPECN. CC-388, SIZE: 10.3 + 0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG.

O RING 74.3 X 3 TO OFAJ DRAWING NO.FS-3036A

O RING 74.3 X 3 TO OFAJ DRAWING NO.FS-3036A

BLIND RIVET TO OFAJ DRAWING NO.FS-3035

BLIND RIVET TO OFAJ DRAWING NO.FS-3035

O RING 7.1 X 1.6 TO OFAJ DRAWING NO.FS-3034A

O RING 7.1 X 1.6 TO OFAJ DRAWING NO.FS-3034A

CONVERSION OF FUZE HOLDER TO OFAJ DRG.NO FS-3025 INTO FUZE HOLDER ASSY.TO OFAJ DRAWING NO FS-3027 BY VULCANIZATION

CONVERSION OF FUZE HOLDER TO OFAJ DRG.NO FS-3025 INTO FUZE HOLDER ASSY.TO OFAJ DRAWING NO FS-3027 BY VULCANIZATION

O RING 21 X 2 TO OFAJ DRAWING NO.FS-3033A

O RING 21 X 2 TO OFAJ DRAWING NO.FS-3033A

SLIDE SHOE TO OFAJ DRAWING NO FS-3024

SLIDE SHOE TO OFAJ DRAWING NO FS-3024

COPPER STRIP TO SPECN. EN 13604-CW009A HAVING STRAIGHT LENGTH OF 2.5 TO 3 MTS. SIZE:64 +/-1 MM WIDE X 4 +0.1 MM THICK

COPPER STRIP TO SPECN. EN 13604-CW009A HAVING STRAIGHT LENGTH OF 2.5 TO 3 MTS. SIZE:64 +/-1 MM WIDE X 4 +0.1 MM THICK

OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100MM X THICKNESS 14 +0.1MM X 1440MM LONG (APPROX)

OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100MM X THICKNESS 14 +0.1MM X 1440MM LONG (APPROX)

25 MM +0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG ROLLED ALUMINIUM ALLOY SHEET TO SPECIFICATION (A) US SPECN. GR-AA 6082 IN "M" CONDITION OR (B) BS 1474 - 1987, GR-6082 IN "F" CONDITION OR (C) IS 733-83, GR-64430 IN "M" CONDITION

25 MM +0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG ROLLED ALUMINIUM ALLOY SHEET TO SPECIFICATION (A) US SPECN. GR-AA 6082 IN "M" CONDITION OR (B) BS 1474 - 1987, GR-6082 IN "F" CONDITION OR (C) IS 733-83, GR-64430 IN "M" CONDITION

LINER, MAIN CHARGE TO DRG.NO.304101457

LINER, MAIN CHARGE TO DRG.NO.304101457

LINER MAIN CHARGE TO OFAJ DRAWING NO.FS-3026

LINER MAIN CHARGE TO OFAJ DRAWING NO.FS-3026

FORG. FOR SLEEVE. STLN- BS-III ,PART NO. F3424215-3(R1)

FORG. FOR SLEEVE. STLN- BS-III ,PART NO. F3424215-3(R1)

DRG. NO. F3424215-3(R1)

FORG. FOR SLEEVE, STLN- BS-III, PART NO. F3427015-3(R1) ON 4th GR.M/S

FORG. FOR SLEEVE, STLN- BS-III, PART NO. F3427015-3(R1) ON 4th GR.M/S

DRG. NO. F3427015-3(R1)

E-SHIFT CYLINDER BODY PT. NO. X1831042-V1

E-SHIFT CYLINDER BODY PT. NO. X1831042-V1

. X1831042-V1

SHIFT CYLINDER BODY PT. NO. F-1830942-V1

SHIFT CYLINDER BODY PT. NO. F-1830942-V1

F-1830942-V1

METALASTIK BUSH PART NO. X0500250-HASE

METALASTIK BUSH PART NO. X0500250-HASE

X0500250

NY. LOCK NUT 7/8" BST PT. NO.-F3547515 HASE

NY. LOCK NUT 7/8" BST PT. NO.-F3547515 HASE

F3547515

BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014

BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014

SLOTTED NUT PART NO. F3596815-A

SLOTTED NUT PART NO. F3596815-A

F3596815-A

SPECIAL SCREW -X 3534511 V1 SIZE M14×2×40 IPL NO. 109/F(XL) ASSY

SPECIAL SCREW -X 3534511 V1 SIZE M14×2×40 IPL NO. 109/F(XL) ASSY

X 3534511 V1

LOCKING WASHER /SECURING WASHER PT.NO. X4902110-(7)

LOCKING WASHER /SECURING WASHER PT.NO. X4902110-(7)

X4902110-(7)

SPECIAL SCREW PT. NO. X3535311-V1 SIZE M16×2×50 DRG NO. X3534511 -V1

SPECIAL SCREW PT. NO. X3535311-V1 SIZE M16×2×50 DRG NO. X3534511 -V1

X3534511 -V1

AXLE TUBE NUT DRG/PART NO. F3550511-A

AXLE TUBE NUT DRG/PART NO. F3550511-A

F3550511-A

STEEL ROUND 32 MM DIA SPECN 16 MN CR5

STEEL ROUND 32 MM DIA SPECN 16 MN CR5

STEEL ROUND 25 MM DIA SPECN EN-16 TO BS-970 FOR LOCKING BOLT TO PT NO. F3573815 # REAR AXLE ASSY.

STEEL ROUND 25 MM DIA SPECN EN-16 TO BS-970 FOR LOCKING BOLT TO PT NO. F3573815 # REAR AXLE ASSY.

STUD 3/8" F3751015 VI

STUD 3/8" F3751015 VI

F3751015 VI

SPECIAL SCREW SIZE M14×2×60 IPL NO. 110/FX L PT. NO. X3534611 V1 DRG NO. X3534511 V1

SPECIAL SCREW SIZE M14×2×60 IPL NO. 110/FXL PT. NO. X3534611 V1 DRG NO. X3534511 V1

X3534511 V1

FLANGE SCREW HEX M16X1.5X40 LONG-GR.12.9

FLANGE SCREW HEX M16X1.5X40 LONG-GR.12.9

X3535411

STA JOINT FLANGE (FINISH) BS-III, MK-IV,F/XL PART NO. X1806122, STALLION

STA JOINT FLANGE (FINISH) BS-III, MK-IV,F/XL PART NO. X1806122, STALLION

X1806122-V1

ASSY. WHEEL NUT M22×2.5 PT.NO.F3569510

ASSY. WHEEL NUT M22×2.5 PT.NO.F3569510

F3569510

WHEEL BOLT M22×2.5 PART NO. F-3569310-C

WHEEL BOLT M22×2.5 PART NO. F-3569310-C

F3569310_Rev_C

LIQUID GASKET ANABOND-673 TWO CARTRIDGES OF 350 GMS EACH C-5026016 OR EQUIVALENT

LIQUID GASKET ANABOND-673 TWO CARTRIDGES OF 350 GMS EACH C-5026016 OR EQUIVALENT

Front BRAKE ASSY. RH FRONT AXLE STALLION PT. NO. F3P16900 REF DRG. NO. F3P16800 ISSUE HASH.1

Front BRAKE ASSY. RH FRONT AXLE STALLION PT. NO. F3P16900 REF DRG. NO. F3P16800 ISSUE HASH.1

F3P16800 LH & F3P16900 RH-#.1

STA-BRAKE CHAMBER/ WEDGE BRAKE ACTUATOR,MK-IV Part no. F8289600 STALLION VEHICLE BS-III NORNS PART NO./DRG. NO. F8289600-HASE.2

STA-BRAKE CHAMBER/ WEDGE BRAKE ACTUATOR,MK-IV Part no. F8289600 STALLION VEHICLE BS-III NORNS PART NO./DRG. NO. F8289600-HASE.2

F8289600_2_

TIE ROD ASSY PT NO. B2594502

TIE ROD ASSY PT NO. B2594502

B2594502

SPIGOT STEERING KNUCKLE PT. NO. X-1804011-D REF DRG NO. X1804011D SHEET 2 OF 2 FOR FORGING DRG.

SPIGOT STEERING KNUCKLE PT. NO. X-1804011-D REF DRG NO. X1804011D SHEET 2 OF 2 FOR FORGING DRG.

X1804011-D_1_(Machined)_2-Finish__Rev_D

REAR BRAKE ASSY. RH Pt.No. F3P03600-A

REAR BRAKE ASSY. RH Pt.No. F3P03600-A

F3P03500-A

REAR BRAKE ASSY. LH PART NO. F3P03500-A

REAR BRAKE ASSY. LH PART NO. F3P03500-A

F3P03600_(Ref_Drawing_F3P03500)_A_

Front BRAKE ASSY. LH PT.NO. F3P16800 ISSUE HASH.1

Front BRAKE ASSY. LH PT.NO. F3P16800 ISSUE HASH.1

F3P16800 LH & F3P16900 RH-#.1

STA-REAR AXLE/HALF AXLE PART NO. B3045901

STA-REAR AXLE/HALF AXLE PART NO. B3045901

B3045901 #.1

STA-FRONT AXLE/HALF AXLE MARK-IV, BS-III COMPLAINTS PART NO. B2542501 HASE.1 STALLION VEHICLE

STA-FRONT AXLE/HALF AXLE MARK-IV, BS-III COMPLAINTS PART NO. B2542501 HASE.1 STALLION VEHICLE

B2542501#.1

S/A OF TC WITH COVER PT. NO. B1900905 HASH.0 CONSISTING OF (1) X1801622 (2) B-1900113 HC TR. CASE COVER (3)F0936215 HB DOWEL (4) F3756715(Ref -F37403154-HA) (5) L3080511 PL. NUT (6) L4100500 SC. WASHER

S/A OF TC WITH COVER PT. NO. B1900905 HASH.0 CONSISTING OF (1) X1801622 (2) B-1900113 HC TR. CASE COVER (3)F0936215 HB DOWEL (4) F3756715(Ref -F37403154-HA) (5) L3080511 PL. NUT (6) L4100500 SC. WASHER

B-1900905 HASH

PIN TO DRG NO. IQX 579 DC 34416-A DTD.29.06.88

PIN TO DRG NO. IQX 579 DC 34416-A DTD.29.06.88

BRASS ROD TO SPECIFICATION BS:2874 CZ121 SIZE: 65MM DIA

BRASS ROD TO SPECIFICATION BS:2874 CZ121 SIZE: 65MM DIA

BRASS ROD TO SPECIFICATION BS:2874 CZ121 OR BS:2872 CZ122 SIZE; 58 MM DIA

BRASS ROD TO SPECIFICATION BS:2874 CZ121 OR BS:2872 CZ122 SIZE; 58 MM DIA

BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE: DIA 44 -0.1 0 MM WITH MIN 1.5 MTR STRAIGHT LENGTH

BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE: DIA 44 -0.1 0 MM WITH MIN 1.5 MTR STRAIGHT LENGTH

BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE: DIA 42 - 0 10 MM WITH MIN 1.5 MTR STRAIGHT LENGTH

BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE: DIA 42 - 0 10 MM WITH MIN 1.5 MTR STRAIGHT LENGTH