SPECN NO:IND/ADE/0069(c)

SPECN NO:IND/ADE/0069(c)

SPECN.NO.: IS:3255-1979 except that :- (i)In appearance shade finish and in other respects not defined in this Specn. the material shall conform to the sealed pattern held of the custody of the controller,CQAT&C, Kanpur. (ii)There shall be no presence of strach. (iii)End in full width to be raised by 2. (iv)Pick/cm(-1) Tolerance to be premitted. (v)100% Sampling/testing/inspection shall be resorted to. (vi) Scouring loss-Mild method is to be followed in view of severe method & shall not except 2%(two percent). (vii) Sampling plan as per annexure (A) attached.

SPECN.NO.: IS:3255-1979 except that :- (i)In appearance shade finish and in other respects not defined in this Specn. the material shall conform to the sealed pattern held of the custody of the controller,CQAT&C, Kanpur. (ii)There shall be no presence of strach. (iii)End in full width to be raised by 2. (iv)Pick/cm(-1) Tolerance to be premitted. (v)100% Sampling/testing/inspection shall be resorted to. (vi) Scouring loss-Mild method is to be followed in view of severe method & shall not except 2%(two percent). (vii) Sampling plan as per annexure (A) attached.

SPECIFICATION NO. : ADDE/BP/3 (c) ROLL LENGTH 100 MTRS. EXCLUDING SAMPLE.

SPECIFICATION NO. : ADDE/BP/3 (c) ROLL LENGTH 100 MTRS. EXCLUDING SAMPLE.

SEPCN.IS:9686-1980 AMENDMENT NO. 1 OF Dec.83 and packing & marking schedule no. CQA(T&C)/PMS/130

SEPCN.IS:9686-1980 AMENDMENT NO. 1 OF Dec.83 and packing & marking schedule no. CQA(T&C)/PMS/130

SPECIFICATION NO. : ADDE/BP/1(b).

SPECIFICATION NO. : ADDE/BP/1(b).

Weight (g/100 m max) has also been amended from 345 to 340 vide amendment No. 1 of Occt"72 SPECIFICATION NO.: IS : 5716 - 1970.

Weight (g/100 m max) has also been amended from 345 to 340 vide amendment No. 1 of Occt"72 SPECIFICATION NO.: IS : 5716 - 1970.

SPECIFICATION NO.: IND/TC/2666 ROLL LENGTH 55 MTR. INCLUDING SAMPLING

SPECIFICATION NO.: IND/TC/2666 ROLL LENGTH 55 MTR. INCLUDING SAMPLING

SPECIFICATION NO. :JSS:8315-6 OR IS:4228

SPECIFICATION NO. :JSS:8315-6 OR IS:4228

SPECN. NO. : ADDE/BP/1(b).ROLL LENGTH 100 MTR.EXCLUDING SAMPLING

SPECN. NO. : ADDE/BP/1(b).ROLL LENGTH 100 MTR.EXCLUDING SAMPLING

1--Width(mm) ---12.7 mm. Appendix B of IS:3846:1984 2--Mass(gm/mt.)--- 8(max). Appendix C of IS:3846:1984 3--Ends in full/width)--- 60+3/-0. IS:1963 4--Picks/cm --- 20+2/-0 (total picks based on two thread working as one. IS:1963 5--Breaking load(20 cm X Full width)("KN.") Minimum-- 1.5 IS:1969 6--Nature of material-- 100% Polyster. IS:667 7--pH Value (Cold Method)--6 to 8.5. IS:1390 8--% Water soluble matter (max)---1%. IS: 3456 9--Weave--- 2/2 Twill weave. Visual

1--Width(mm) ---12.7 mm. Appendix B of IS:3846:1984 2--Mass(gm/mt.)--- 8(max). Appendix C of IS:3846:1984 3--Ends in full/width)--- 60+3/-0. IS:1963 4--Picks/cm --- 20+2/-0 (total picks based on two thread working as one. IS:1963 5--Breaking load(20 cm X Full width)("KN.") Minimum-- 1.5 IS:1969 6--Nature of material-- 100% Polyster. IS:667 7--pH Value (Cold Method)--6 to 8.5. IS:1390 8--% Water soluble matter (max)---1%. IS: 3456 9--Weave--- 2/2 Twill weave. Visual

1- Width(mm) --- 25 mm. Appendix B of IS:3846:1984 2- Mass(gm/mt.)---12(max). Appendix C of IS:3846:1984 3- Ends(in full/width)------ 85+4/-0. IS:1963 4- Picks/cm.--- 20+2/-0 (total picks based on two thread working as one) IS:1963 5- Breaking load(20 cm X full width)("KN.") Minimum--2.4 IS:1969 6- Nature of material--100% Polyster. IS:667 7- pH Value(Cold Method)--6 to 8.5. IS:1390 8- % Water soluble matter(max)-- 1%. IS:3456 9- Weave-- 2/2 Twill weave. Visual

1- Width(mm) --- 25 mm. Appendix B of IS:3846:1984 2- Mass(gm/mt.)---12(max). Appendix C of IS:3846:1984 3- Ends(in full/width)------ 85+4/-0. IS:1963 4- Picks/cm.--- 20+2/-0 (total picks based on two thread working as one) IS:1963 5- Breaking load(20 cm X full width)("KN.") Minimum--2.4 IS:1969 6- Nature of material--100% Polyster. IS:667 7- pH Value(Cold Method)--6 to 8.5. IS:1390 8- % Water soluble matter(max)-- 1%. IS:3456 9- Weave-- 2/2 Twill weave. Visual

SPECIFICATION NO. : IND/GS/1534 (Except Width)

SPECIFICATION NO. : IND/GS/1534 (Except Width)

INVESTMENT CASTING OF RECEIVER AS PER DRAWING NO. RFI SK NO-8849(PROV).FOR 0.32" PISTOL.

bs

DRAWING NO. RFI SK NO-8849(PROV)

Specn. no. IS-6488-1975 With Amndt. No. 1 of Jan. 1980

Specn. no. IS-6488-1975 With Amndt. No. 1 of Jan. 1980

INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.5709*13FOR RIFLE 5.56MM INSAS.

bs

TO RFI SK.NO.5709*13

INVESTMENT CASTING OF BRACKET(WITH HEAT TREATMENT)AS PER RFI SK.NO.6756*3-S(I.C TO BE SUPPLIED IN HARDNESS RANGE OF 248 TO 280 HB.) FOR RIFLE 5.56MM.INSAS.

bs

AS PER RFI SK.NO.6756*3-S(I.C TO BE SUPPLIED IN HARDNESS RANGE OF 248 TO 280 HB.)

INVESTMENT CASTING OF RETAINER SPRING RECOIL(MODIFIED)AS PERTG/EME.NEW DELHI. TO RFI SK NO.8064-S. FOR RIFLE 5.56 MM INSAS.

bs

AS PERTG/EME.NEW DELHI. TO RFI SK NO.8064-S.

INVESTMENT CASTING TO RFI SK. NO. 6097*12 FOR HINGE COVER. FOR RLFLE 5.56MM INSAS.

bs

TO RFI SK. NO. 6097*12

INVESTMENT CASTING OF TRIGGER (RFI SK-9100) FOR 12 BORE PAG

INVESTMENT CASTING OF TRIGGER ( RFI SK 9100)FOR 12 BORE PAG

RFI SK 9100

INVESTMENT CASTING OF BODY (RFI SK NO 9776, MAT. BS: 3146 PART I 1974 CLASS 5 GRADE 'A' ) FOR 12 BORE PAG.

MAT. BS: 3146 PART I 1974 CLASS 5 GRADE 'A'

RFI SK NO 9776

INVESTMENT CASTING OF TRIGGER LOCKING BRACKET(RFI SK NO - 9102) FOR 12 BORE PAG.

INVESTMENT CASTING OF TRIGGER LOCKING BRACKET(RFI SK NO - 9102) FOR 12 BORE PAG.

RFI SK NO - 9102

INVESTMENT CASTING OF TRIGGER ( RFI SK 9100)FOR 12 BORE PAG.

bs

RFI SK 9100

INVESTMENT CASTING OF CONNECTOR BUTT EXR OF RIFLE 5.56MM EXCALIBUR MK.1 TO RFI SK.NO. 7596

BS

RFI SK.NO. 7596

FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045

FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045

RFI SK/10045

FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046

FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046

RFI/SK NO. 10046

FORGING OF SLIDE AS PER RFI SK.NO.3211/A FOR PISTOL AUTO 9MM 1A.

FORGING OF SLIDE AS PER RFI SK.NO.3211/A FOR PISTOL AUTO 9MM 1A.

RFI SK.NO.3211/A

IS:9686-1980 AMD-I Reaffirmed 2012

IS:9686-1980 AMD-I Reaffirmed 2012

No.:IND/GS/IAF/48, Except that Plating should be Cu/Ni. 25b Cr.r as per specification No.IS:1068-1993

No.:IND/GS/IAF/48, Except that Plating should be Cu/Ni. 25b Cr.r as per specification No.IS:1068-1993

No.IND/GS/IAF/48, Except that Plating should be Cu/Ni Cr.r as per Specification No. IS:1068-1993

No.IND/GS/IAF/48, Except that Plating should be Cu/Ni Cr.r as per Specification No. IS:1068-1993

Hanger PVC material having arrangement for hanging the Trouser, sz. width-55mm, Length-85mm (- + 10)

Hanger PVC material having arrangement for hanging the Trouser, sz. width-55mm, Length-85mm (- + 10)

• as per attached file

• as per attached file

As per Requirements & Specifications

As per Requirements & Specifications

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

ISC-220 TO IS:5-1994 (4th REV.) AMENDMENT NO. 1

ISC-220 TO IS:5-1994 (4th REV.) AMENDMENT NO. 1

TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION

AS PER DRAWING

CTM-00033A

84mm TPT PROJECTILE BODY TO GSF DRG. NO M-11229 IN FINISH MACHINED CONDITION

AS PER DRG.

M-11229

WOODEN PACKING BOX TO DRG.NO.998-PB-3402 REQUIRED FOR HATCH TRAVERSING AS PER SCOPE OF WORK.

DRG.NO.998-PB-3402 REQUIRED FOR HATCH TRAVERSING

DRG.NO.998-PB-3402

WOODEN PACKING BOX TO DRG.NO. 998-PB-3392 REQUIRED FOR TRAV.LAYING RED(RL) AS PER SCOPE OF WORK.

PACKING BOX TO DRG.NO. 998-PB-3392 REQUIRED FOR TRAV.LAYING RED(RL)

DRG.NO. 998-PB-3392

AIR MANOMETER MVU-100 (REQ. FOR DRG. NO. AK-630M SB 02

NA

SPANNER OPEN JAW FIXED DOUBLE ENDED STEEL PLATED (MM)10X11 CAT PART NO.5120-001555 MAKE- JHALANI/TAPARIA/EVEREST.

IS:2028-1998 (4th REV.) AND SUPP. SCH. NO. CQA(GS)/SS/473

DRAWBAR TO PT NO 1143440 AS PER ANNEXURE NO DHANUSH/1143440/2017

DRAWBAR TO PT NO 1143440 AS PER ANNEXURE NO DHANUSH/1143440/2017

FOR DETAILED TERMS AND CONDITION SPECIFICATION AND DRAWINGS PLEASE VISIT ofbeproc.gov.in

SPRING CATCH BARREL TO DRG NO.PH-1-12 IN FINISHED CONDITION D.A.NO.- 116/03 , DT. 18-11-03

SPRING CATCH BARREL TO DRG NO.PH-1-12 IN FINISHED CONDITION D.A.NO.- 116/03 , DT. 18-11-03

DRG NO.PH-1-12

EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04

EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04

DRG.NO.PH-10-1

CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142

CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142

DRG.NO.SK-4142

GUIDE SPRING FOR MAGAZINE 9 MM DS CAT NO.1005-000979 DC(1) NO.25255-SA DATED 30-01-2002

GUIDE SPRING FOR MAGAZINE 9 MM DS CAT NO.1005-000979 DC(1) NO.25255-SA DATED 30-01-2002

DS CAT NO.1005-000979

Fastener Plastic Slide Med. Duty OG 32 Cm Long (Closed end one way with non-lock slider)

XX

SYNTHETIC (PLASTIC) SLIDE FASTENER MEDIUM SPECIAL DUTY TWO-WAY CENTRE CLOSING, AUTO LOCK DOUBLE SLIDER, OG 97 CMS.

IS: 14181 (PT 1-3) 2002 & AMDT No. 2 March 2008

Synthetic (Plastic) Slide Fastner-Special Purpose OG Medium Special Duty 28 CM Auto Lock

XX

Cloth Canvas Flax (Tow) 56 cms Chhagul Test

JSS-8305-11-2007 (REv. No. 1).....

SYNTHETIC (PLASTIC) SLIDE FASTNER-SPECIAL PURPOSE O.G.MEDIUM SPECIAL DUTY 32 CM AUTO LOCK

AS PER REQUIREMENT AND SPECIFICATION

AS PER SPECIFICATION

ADRDE/SPECN/1992/35.

AS PER SPECIFICATION

SPECN-ADRDE/QMS/TDTM/C-2010/04

AS PER SPECIFICATION

SPECN-ADRDE/SPECN/1985/25

AS PER SPECIFICATION

SPECN-ADRDE/SPECN/1992/35

AS PER SPECIFICATION

SPECN-ADRDE/SPECN/1992/36 (TYPE-I)

CORD COTTON BS 60 KG U/D

ADRDE/SPECN/1992/36 (TYPE-IV)

• As per Specification/Drawing

• As per Specification/Drawing

AS PER SPECIFICATION

SPECN-ADRDE/SPECN/1992/36(TYPE-II)

CORD COTTON BS 20 KG U/D

SPECN- IS: 1402 Except That :- (i) plaits/dm 75 +/- 5 (ii) Linear Density (Tex) - 1240 max

• As Per Specification/Drawing

• As Per Specification/Drawing

AS PER SPECIFICATION

SPECN-ADRDE/SPECN/1992/36 TYPE-V

AS PER SPECIFICATION

Specification No. : IS : 5175-1992.

AS PER SPECIFICATION

SPECIFICATION NO. : JSS - 4020 - 8 EXCEPT THAT IN APPEARANCE

SPECIFICATION NO: IND/ENG/PROV/1222.

SPECIFICATION NO: IND/ENG/PROV/1222.

CORD NYLON BRAIDED UNDYED 345 N CORELESS

SPECN.NO.: ADRDE/SPECN/1987/31. appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, Kanpur. Sampling plan and criteria of conformity. As per anexure 11 (TC-8).

• As Per Specification/Drawing

• As Per Specification/Drawing

AS PER SPECIFICATION

SPECN. NO. ADRDE/QAC/TECH PART/05/01

AS PER SPECIFICATION

SPECN-IS:4227(VARIETY NO.-11_)

AS PER SPECIFICATION

SPECIFICATION NO.: IS :4227-1981 VARIETY NO 4(b)

AS PER SPECIFICATION

IN ROLL LENGTH OF 100 MTS. SPECIFICATION:IS:4227-1967

CORDAGE NYLON 1200 LBS UD (BS-544 KG)

SPECIFICATION - JSS:4020-9:1999 (REV-1)

• As per drawing/Specification

• As per drawing/Specification

AS PER SPECIFICATION

SPECIFICATION:- NO.OF SPINDLE----36 NO.OF ENDS-------36 NO.OF CORE------- 8 WT./100 MTR------1100 GM (APPROX) NO.OF PLAITS/dm--50 TEX OF YARN:-SHEATH- 90.9X2 -CORE -100.9X3 BS.---------450 KG ELONGATION % ---30 (APPROX) CONSTRUCTION----BRAIDED

AS PER SPECIFICATION

SPECIFICATION :- NO.OF SPINDLES----------------16 NO. OF ENDS-------------------16 NO.OF PLAITS/dm------------36/37 WEIGHT/Mtr.----------------8.5 gms.(MAX). TEX OF YARN----------------93.4 X 4 B.S. IN NEWTON-------------3600-N (MIN).

CORDAGE NYLON BS-1800 N OLIVE GREEN

SPECIFICATION :- NO.OF SPINDLES------------16 NO.OF ENDS----------------32 NO.OF PLAITS-------------45/56 NO.OF CORES----------------2 TEX OF YARN--SEATH = 96.5 X 1 --CORE = 96.5 X 4 B.S. IN NEWTON (15 Cms.BETWEEN GRILLS)--1800-N(MIN) TYPE-----------------BRAIDED. MASS/100 M (In Gms.)------475 (MAX).

CORDAGE NYLON BS-1800 N U/D

SPECIFICATION :- NO.OF SPINDLES-------------------16 NO.OF ENDS-----------------------16 NO.OF PLAITS--------------------- NO.OF CORES-----------------------2 TEX OF YARN---SEATH=91.5 X 2 CORE =91.4 (2 x 2) B.S.IN NEWTON(15 Cms.BETWEEN GRILLS)-----1800-N(MIN) TYPE-------------------------BRAIDED. MASS/100 M (IN gms.)----------475 MAX.

CORDAGE NY. 66, BRAIDED 2940 N U/D

Specification No. ADRDE/SPECN/71(a) Except that : The revised linear density of Warp yarn will be Type I-840x4 & Type II-840x2 or Type I-1680x2 & Type II-1680x1.

• As per Specification/Drawing

• As per Specification/Drawing
• As per Specification/Drawing

CORDAGE NYLON CORELESS BRAIDED BS=250-300 kg U/D

Spcn. As Per :- 1. SPINDLE -16 2. END -48 3. DENIER -480 4. LENGTH/KG-175 M (Min). 5. PLAITS/dm-37/38.

CORDAGE NYLON BRAIDED 318 KG

SPCN. NO:IS:4227-1980 EXCEPT MASS/ METRES NOT TO EXCEED 8GM.

CORDAGE NYLON CORELESS ( 250 KG )

SPECIFICATION: Braking Strength - 250kg (Minimum) No. of Spindle - 16 No of End - 48 Plaits/DM - 37/48 Denier - 840 Length/kg - 175m (Minimum)

CORDAGE NYLON BRAIDED BS:318 KGS U/D

SPECN-IS:4227-1981.

CORDAGE NYLON BRAIDED CORELESS 66, BS 110 kgf U/D

Mass,g/100m max. 270 IS:7071:1989 Pt.-2 B.S.,kgf grip dis:15cm Min 110 IS:7071:1986 Pt.-4 Extension at break,% 25+/-5 IS:7071:1986Pt.4 No. of spindles 16 IS:7071:1989 Pt.1to 3 No. of sheath Threads 32 IS:7071:1989 Pt.1to 3 noninal Yarn Denier x ply 210 x 3 IS:3442-1980 TPM 200+/-10% IS:832-1985 No. of Plaits/dm 50+/-5 IS:4227-1998 pH value 5 TO 5.5 IS:1390-1983 COLD MD Material-bright,high tenacity,multifilament,ind. gr. heat&UV stablilized Ny.66 yarn IS:5762.Appendix B ADRDE/SPEC/2000/55

CORD ELASTIC 5MM U/D

AS PER SPCN.NO.ADRDE/SPCN/1980/3.

CORDAGE NYLON BRAIDED U/D BS 110 KG

1- NO OF SPINDLES ----16 ----VISUAL/COUNTING 2-NO.OF ENDS ----48 ---VISUAL/COUNTING 3-NO.OF PLAITS/dm -----45/46 ----IS:7071(pt 3) 4-MASS/M in gm ----2.8 ----IS:7071(pt 2) 5-TEX OF YARN ----15.7X3 6-BS IN KGS 110(min) ----IS:3442(pt 4) (15 CM bet"grips) 7-CONSTRUCTION -----BRAIDED ----VISUAL

CORDAGE NYLON BRAID. 250 KG U/D

Spcns. NUMBER OF SPINDLES=16;NUMBER OF ENDS=32NUMBER OF PLAITS/DM=38-44;NUMBER OF CORE THREADS=3 WEIGHT/M IN GMS=6.3 MAX.TEX OF YARN SHEATH=16.7X3X3 CORE =16.7X6X3 BREAKING LOAD IN KG (15CM BETWEEN GRIP)= 250 KG (MIN) PERCENTAGE ELONGATION AT BREAK=26 TO 28;WEAVE=BRAIDED TWIST PER MTR.(TPM) 300+-20(SINGLE) 270+-20(PLY) 250+-20(CABLE