S/5432/PW/TC-19(a),Min Width 142 cms required to be water repellant & should conform to standard / values laid down in R/O the bundesmann test as mentioned in Clause 6.1(q) of above specification. Testing of % composition of Wool & polyester should be done as per IS: 2006-1988 2nd Revision Amendment No.1 & the method of Calculation to be based on dry mass basis only as per Clause 9.4.1 of specification.
Specification
S/5432/PW/TC-19(a),Min Width 142 cms required to be water repellant & should conform to standard / values laid down in R/O the bundesmann test as mentioned in Clause 6.1(q) of above specification. Testing of % composition of Wool & polyester should be done as per IS: 2006-1988 2nd Revision Amendment No.1 & the method of Calculation to be based on dry mass basis only as per Clause 9.4.1 of specification.
IND/TC/0157 FIRM TRADE MARK IN ABBREVIATED FORM IN SMALLEST POSSIBLE LETTER TO BE PRINTED ON THE UNCOATED SIDE OF THE FABRIC ALONGSELVEDGE AT AN INTERVAL OF ONE METER. THE HEIGHT OF LETTERSHOULD NOT EXCEED 8MM. DARK/BRIGHT COLOUR TO BE AVOIDED.AS PER RELEVANT CLAUSE OF SPECIFICATION
Specification
IND/TC/0157 FIRM TRADE MARK IN ABBREVIATED FORM IN SMALLEST POSSIBLE LETTER TO BE PRINTED ON THE UNCOATED SIDE OF THE FABRIC ALONGSELVEDGE AT AN INTERVAL OF ONE METER. THE HEIGHT OF LETTERSHOULD NOT EXCEED 8MM. DARK/BRIGHT COLOUR TO BE AVOIDED.AS PER RELEVANT CLAUSE OF SPECIFICATION
IS:4726-1984 (except air porosity test) and Firms name/trademark should be woven/stamped/embossed on the selvedge. in case of stamp, it should be neatly stamped on back side of fabric at an interval of 1(one) meter, without adding to any fabric defect like migration of stamping mark to the outside of the next layer of fabric when folded.
Specification
IS:4726-1984 (except air porosity test) and Firms name/trademark should be woven/stamped/embossed on the selvedge. in case of stamp, it should be neatly stamped on back side of fabric at an interval of 1(one) meter, without adding to any fabric defect like migration of stamping mark to the outside of the next layer of fabric when folded.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
28246
OFDFYS/EFA/DAVP/01/2018/AVR/2018/01-1
Engine Factory Avadi
Chennai
Chennai
Chennai
Chennai, Tamil Nadu
600054
Scrabbed of BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993(DC-26469-SA).(COMPLETE ASSY.).FOR RIFLE 5.56MM INSAS
Specification
Scrabbed of BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993(DC-26469-SA).(COMPLETE ASSY.).FOR RIFLE 5.56MM INSAS
GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK-989,3145/63 0R CQA(SA)SK-984,3145/64 OR CQA(SA)SK-981
Specification
GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK-989,3145/63 0R CQA(SA)SK-984,3145/64 OR CQA(SA)SK-981
SPECN: AS PER APPENDIX 'C' OF PROV.
SPECIFICATION NO. S/5094/TC-1(B)/Cap Bal OG
(Imp)RELEVANT CLAUSE OF SPECIFICATION
NO. IND/TC/1208 AS PER SPECIFICATION NO.
IND/TC/1208
Specification
SPECN: AS PER APPENDIX 'C' OF PROV.
SPECIFICATION NO. S/5094/TC-1(B)/Cap Bal OG
(Imp)RELEVANT CLAUSE OF SPECIFICATION
NO. IND/TC/1208 AS PER SPECIFICATION NO.
IND/TC/1208
PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTERFLEECE OG/2009 /TC-19. AS PER CQA(T&C)/PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIEDIN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO. CQA(T&C)/QAI/99 TC-11
Specification
PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTERFLEECE OG/2009 /TC-19. AS PER CQA(T&C)/PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIEDIN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO. CQA(T&C)/QAI/99 TC-11
SPECN NO. PROV/S/2599/TC-
11/2009/03,EXCEPT THAT CLAUSE No.8.5
WHICH SHALL BE"AS PER DRAWING PLATE
No.OCFS/CAPFS/ARMYLOGO"AND CLAUSE
No.16.1 WHICH SHALL BE AS PER SCHEDULE
No.CQA(T&C)/PMS/35(d), EXCEPT THAT THE
FABRIC SHALL BE SUPPLIED INROL FORM ONLY.
Specification
SPECN NO. PROV/S/2599/TC-
11/2009/03,EXCEPT THAT CLAUSE No.8.5
WHICH SHALL BE"AS PER DRAWING PLATE
No.OCFS/CAPFS/ARMYLOGO"AND CLAUSE
No.16.1 WHICH SHALL BE AS PER SCHEDULE
No.CQA(T&C)/PMS/35(d), EXCEPT THAT THE
FABRIC SHALL BE SUPPLIED INROL FORM ONLY.
