SET OF OPTICS FOR GNVP CONSISTING OF FOLLOWING: (1) LENS NO.I IRDE-2023/1,1/SET,(2) LENS NO. II & III DRG. IRDE-2023/2,1/SET, (3) LENS NO. IV & V IRDE-2023/3, 1/SET (4) LENS NO. VI IRDE-2023/4, 1/SET, (5) LENS NO.VII & VIII IRDE-2023/5, 1/SET, (6) LENS NO. IX IRDE-2023/6, 1/SET (7) LENS NO.X DRG. NO. IRDE-2023/7, 2/SET, 8) LENS NO.XI & XII DRG. NO. IRDE-2023/8, 2/SET.
Specification
SET OF OPTICS FOR GNVP CONSISTING OF FOLLOWING: (1) LENS NO.I IRDE-2023/1,1/SET,(2) LENS NO. II & III DRG. IRDE-2023/2,1/SET, (3) LENS NO. IV & V IRDE-2023/3, 1/SET (4) LENS NO. VI IRDE-2023/4, 1/SET, (5) LENS NO.VII & VIII IRDE-2023/5, 1/SET, (6) LENS NO. IX IRDE-2023/6, 1/SET (7) LENS NO.X DRG. NO. IRDE-2023/7, 2/SET, 8) LENS NO.XI & XII DRG. NO. IRDE-2023/8, 2/SET.
Drawing no.
SET OF OPTICS FOR GNVP CONSISTING OF FOLLOWING: (1) LENS NO.I IRDE-2023/1,1/SET,(2) LENS NO. II & III DRG. IRDE-2023/2,1/SET, (3) LENS NO. IV & V IRDE-2023/3, 1/SET (4) LENS NO. VI IRDE-2023/4, 1/SET, (5) LENS NO.VII & VIII IRDE-2023/5, 1/SET, (6) LE
OPTICAL GLASS EDF-699301 OR SF-15 SLAB SIZE:300-400 X120-180 X30-75 MM STRAIE GRD A INCUSION GRD SMALL B FINE ANNEALED SO THAT STRESS BIREFRIFENCE IS NOT MORE THAN 10NM PER CM AS IS :1400-1960. SUPPLIER SHALL PROVIDE MELT DATA SHEET ALONG WITH GLASS SUPPLY
Specification
OPTICAL GLASS EDF-699301 OR SF-15 SLAB SIZE:300-400 X120-180 X30-75 MM STRAIE GRD A INCUSION GRD SMALL B FINE ANNEALED SO THAT STRESS BIREFRIFENCE IS NOT MORE THAN 10NM PER CM AS IS :1400-1960. SUPPLIER SHALL PROVIDE MELT DATA SHEET ALONG WITH GLASS SUPPLY
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
26
566
Kilogram
28816
O148-17
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
SPECIFICATION :-
NO.OF SPINDLES----------------16
NO. OF ENDS-------------------16
NO.OF PLAITS/dm------------36/37
WEIGHT/Mtr.----------------8.5 gms.(MAX).
TEX OF YARN----------------93.4 X 4
B.S. IN NEWTON-------------3600-N (MIN).
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101126341
7046
Metre
28824
110170749
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
CONVERSION OF AL. ALLOY ROD SIZE : 10+/-0.1 MM DIA TO SPECN.IS:733-1983:2006 GR.24345 IN WP COND.(ITEM CODE:0611506010) HAVING STRAIGHT LENGTH OF 1.5 TO 3 METRES BY PEELING & GRINDING INTO DIA 6.5 MM -0.03 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM PER METER LENGTH.
Specification
CONVERSION OF AL. ALLOY ROD SIZE : 10+/-0.1 MM DIA TO SPECN.IS:733-1983:2006 GR.24345 IN WP COND.(ITEM CODE:0611506010) HAVING STRAIGHT LENGTH OF 1.5 TO 3 METRES BY PEELING & GRINDING INTO DIA 6.5 MM -0.03 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM PER METER LENGTH.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
00
1173
Whole job
28836
FS2170134
Ordnance Factory Ambajhari
The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021
CONVERSION OF MILD STEEL ROD DIA 7 MM TO SPECN.IS:1875-1992(REAFFIRMED) GRADE 20C8 BY GRINDING TO 6.5 MM DIA +/- 0.05 MM SPECN. IS:1975-1992 ( REAFFIRMED) GRADE 20 C8 WITH STRAIGHTNESS 0.3 MM PER METER LENGTH.
Specification
CONVERSION OF MILD STEEL ROD DIA 7 MM TO SPECN.IS:1875-1992(REAFFIRMED) GRADE 20C8 BY GRINDING TO 6.5 MM DIA +/- 0.05 MM SPECN. IS:1975-1992 ( REAFFIRMED) GRADE 20 C8 WITH STRAIGHTNESS 0.3 MM PER METER LENGTH.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
00
1637
Whole job
28837
FS2170133
Ordnance Factory Ambajhari
The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021
CONVERSION OF AL. ALLOY ROD SIZE : 14+/-0.1 MM DIA TO SPECN.IS:733:2006 GR.24345 IN WP COND.(ITEM CODE:0611506014) HAVING STRAIGHT LENGTH OF 1.5 TO 3 METRES BY PEELING & GRINDING INTO DIA 11.5 MM -0.03 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM PER METER LENGTH.
Specification
CONVERSION OF AL. ALLOY ROD SIZE : 14+/-0.1 MM DIA TO SPECN.IS:733:2006 GR.24345 IN WP COND.(ITEM CODE:0611506014) HAVING STRAIGHT LENGTH OF 1.5 TO 3 METRES BY PEELING & GRINDING INTO DIA 11.5 MM -0.03 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM PER METER LENGTH.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
00
1333
Whole job
28838
OFMK/RM/F404117
Ordnance Factory Medak
The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205
SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES.
1-COUNT OF YARN-210 DENIER, HIGH TENACITY.
2-WIDTH-25 MM +-1MM.
3-THICKNESS-0.5 MM TO 0.8 MM.
4-WEIGHT MAX-1120 GMS/100 METERS.
5-BREAKING STRENGTH-MIN.405 KGS ON FULL WIDTH 20 CMS STRIPS
Specification
SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES.
1-COUNT OF YARN-210 DENIER, HIGH TENACITY.
2-WIDTH-25 MM +-1MM.
3-THICKNESS-0.5 MM TO 0.8 MM.
4-WEIGHT MAX-1120 GMS/100 METERS.
5-BREAKING STRENGTH-MIN.405 KGS ON FULL WIDTH 20 CMS STRIPS
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
9911022279
3026
Metre
28842
B20173280
Ordnance Factory Kanpur
The Sr.General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
SPECIFICATION NO. : IND/TC/2555 except that :-
in appearance finish and other respects not defined in this
specification the material shall conform to the sealed
pattern held in the custody of the Controller,CQAT&C,Kanpur.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101126210
671776
Metre
28845
110170744
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004