28001
OFDFYS/EFA/DAVP/01/2018/AVR/2018/01-4
Engine Factory Avadi
Chennai
Chennai
Chennai
Chennai, Tamil Nadu
600054
28002
OLF/MM-2/T-1706011749
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
28003
EOI/33/SPECIAL/REGULARISATION
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
28004
128MMETT18001104/G685EO0317
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name
Code
Quantity
Approx Value
Select
EXTRACTOR TO DRG NO29P 0020STAR2 required for 0POINT315 Sporting Rifle
Description
EXTRACTOR TO DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle
Specification
AS PER DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
03
1201
Number
28005
170321FHFO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
28006
170304FHFO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
28007
EOI/D/PV/2018
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
28008
OPEN ADVERTISEMENT No: ORDFYS/RFI/CPPP/Vendor Registration/18-19/MPM/04 - Raw Material
Rifle Factory Ishapur
The General Manager,
Ishapore
Ishapore
West Bengal
743144
Name
Code
Quantity
Approx Value
Select
STEEL ROD 38mm (+0.5MM-0MM) DIA TO SPECN.JSS:9510-06,2000 (REV-3) CODE REF.
Description
STEEL ROD 38mm (+0.5MM-0MM) DIA TO SPECN.JSS:9510-06,2000 (REV-3) CODE REF. "B"BS:970 PT-I:1983, GD. 708 M40(EN-19A) V.D,
Specification
STEEL ROD 38mm (+0.5MM-0MM) DIA TO SPECN.JSS:9510-06,2000 (REV-3) CODE REF. "B"BS:970 PT-I:1983, GD. 708 M40(EN-19A) V.D,
Testing / Inspection Facility
03
31741
Kilogram
STEEL ROD SIZE 22MM. DIA COLD DRAWN TO SPECN BS970 PT18-01-2018I:1983 GD 080 M 40, ALT MATL. BS :970 PT-I 1983 GD 708 M40 (EN-19A) (IN STRIIGHT 2 OR 2.5 MTR.
Description
STEEL ROD SIZE 22MM. DIA COLD DRAWN TO SPECN BS970 PT18-01-2018I:1983 GD 080 M 40, ALT MATL. BS :970 PT-I 1983 GD 708 M40 (EN-19A) (IN STRIIGHT 2 OR 2.5 MTR.
Specification
STEEL ROD SIZE 22MM. DIA COLD DRAWN TO SPECN BS970 PT18-01-2018I:1983 GD 080 M 40, ALT MATL. BS :970 PT-I 1983 GD 708 M40 (EN-19A) (IN STRIIGHT 2 OR 2.5 MTR.
Testing / Inspection Facility
03
5389
Kilogram
TRADE ASSISTANCE IN MACHINING OF CYLINDER HEAD LH (UPTO OPN NO. 18-210)
Description
TRADE ASSISTANCE IN MACHINING OF CYLINDER HEAD LH (UPTO OPN NO. 18-210)
Specification
TRADE ASSISTANCE IN MACHINING OF CYLINDER HEAD LH (UPTO OPN NO. 18-210)
Testing / Inspection Facility
00
200
Number
STEEL FLAT 50mm ( +0.8MM/-0.00MM) X 38MM (+0.8MM/-0.00MM) RD.CO-RNER 0.5MM MAX X 68MM LONG (+1MM/-0.0MM)
Description
STEEL FLAT 50mm ( +0.8MM/-0.00MM) X 38MM (+0.8MM/-0.00MM) RD.CO-RNER 0.5MM MAX X 68MM LONG (+1MM/-0.0MM)
Specification
STEEL FLAT 50mm ( +0.8MM/-0.00MM) X 38MM (+0.8MM/-0.00MM) RD.CO-RNER 0.5MM MAX X 68MM LONG (+1MM/-0.0MM)
Testing / Inspection Facility
03
12606
Kilogram
TRADE ASSISTANCE IN MACHINING OF CYLINDER HEAD LH (OPN NO 20-530)
Description
TRADE ASSISTANCE IN MACHINING OF CYLINDER HEAD LH (OPN NO 20-530)
Specification
TRADE ASSISTANCE IN MACHINING OF CYLINDER HEAD LH (OPN NO 20-530)
Drawing no.
SB 20-06-34-5
Testing / Inspection Facility
00
742
Number
TRADE ASSISTANCE IN MACHINING OF CYLINDER HEAD LH (OPN NO 18-525)
Description
TRADE ASSISTANCE IN MACHINING OF CYLINDER HEAD LH (OPN NO 18-525)
Specification
TRADE ASSISTANCE IN MACHINING OF CYLINDER HEAD LH (OPN NO 18-525)
Testing / Inspection Facility
00
648
Number
STEEL ROUND 38 MM DIA 380 MM LONG BS 970, PT-1,1983,708M 40/ EN-19 FOR BARREL OF 7.62 MM RIFLE GHATAK.
Description
STEEL ROUND 38 MM DIA 380 MM LONG BS 970, PT-1,1983,708M 40/ EN-19 FOR BARREL OF 7.62 MM RIFLE GHATAK.
Specification
STEEL ROUND 38 MM DIA 380 MM LONG BS 970, PT-1,1983,708M 40/ EN-19 FOR BARREL OF 7.62 MM RIFLE GHATAK.
Testing / Inspection Facility
03
16369
Kilogram
STEEL ROD 32mm DIA (+0.1-0.00) PEELED BAR IN EXACT LENGTH OF 800MM (+5MM-0.00MM) EACH PIECE, TO SPECN. BS-970, PT-I:1983, GD-835, M-15 (EN-39B)
Description
STEEL ROD 32mm DIA (+0.1-0.00) PEELED BAR IN EXACT LENGTH OF 800MM (+5MM-0.00MM) EACH PIECE, TO SPECN. BS-970, PT-I:1983, GD-835, M-15 (EN-39B)
Specification
STEEL ROD 32mm DIA (+0.1-0.00) PEELED BAR IN EXACT LENGTH OF 800MM (+5MM-0.00MM) EACH PIECE, TO SPECN. BS-970, PT-I:1983, GD-835, M-15 (EN-39B)
Testing / Inspection Facility
03
9086
Kilogram
BLANK FOR CARTRIDGE LIFT ( PAG-0054) AS PER RFI SK-8974-GFOR 12 BORE PUMP ACTION GUN.STEELSTRIP 167+ -0.2 X MULTIPLE OF 3000MM. X 1.9-0.1 THICK
Description
BLANK FOR CARTRIDGE LIFT ( PAG-0054) AS PER RFI SK-8974-GFOR 12 BORE PUMP ACTION GUN.STEELSTRIP 167+ -0.2 X MULTIPLE OF 3000MM. X 1.9-0.1 THICK
Specification
BLANK FOR CARTRIDGE LIFT ( PAG-0054) AS PER RFI SK-8974-GFOR 12 BORE PUMP ACTION GUN.STEELSTRIP 167+ -0.2 X MULTIPLE OF 3000MM. X 1.9-0.1 THICK
Testing / Inspection Facility
70
4622
Kilogram
TRADE ASSISTANCE IN MACHINING OF CYLINDER HEAD COVER RH (UPTO OPN NO. 17-175)
Description
TRADE ASSISTANCE IN MACHINING OF CYLINDER HEAD COVER RH (UPTO OPN NO. 17-175)
Specification
TRADE ASSISTANCE IN MACHINING OF CYLINDER HEAD COVER RH (UPTO OPN NO. 17-175)
Testing / Inspection Facility
00
297
Number
TRADE ASSISTANCE IN MACHINING OF CYLINDER HEAD COVER LH (UPTO OPN NO. 17-175)
Description
TRADE ASSISTANCE IN MACHINING OF CYLINDER HEAD COVER LH (UPTO OPN NO. 17-175)
Specification
TRADE ASSISTANCE IN MACHINING OF CYLINDER HEAD COVER LH (UPTO OPN NO. 17-175)
Testing / Inspection Facility
00
200
Number
TRADE ASSISTANCE FOR INDUCTION HARDENING AND TEMPERING OF FLYWHEEL
Description
TRADE ASSISTANCE FOR INDUCTION HARDENING AND TEMPERING OF FLYWHEEL
Specification
TRADE ASSISTANCE FOR INDUCTION HARDENING AND TEMPERING OF FLYWHEEL
Testing / Inspection Facility
00
135
Number
TRADE ASSISTANCE FOR EXHAUST CAMSHAFT FOR WHIRLING OPN NO. 50
Description
TRADE ASSISTANCE FOR EXHAUST CAMSHAFT FOR WHIRLING OPN NO. 50
Specification
TRADE ASSISTANCE FOR EXHAUST CAMSHAFT FOR WHIRLING OPN NO. 50
Testing / Inspection Facility
00
1040
Number
TRADE ASSISTANCE IN MACHINING OF CYLINDER JACKET LH (OPN NO 13-155)
Description
TRADE ASSISTANCE IN MACHINING OF CYLINDER JACKET LH (OPN NO 13-155)
Specification
TRADE ASSISTANCE IN MACHINING OF CYLINDER JACKET LH (OPN NO 13-155)
Testing / Inspection Facility
00
200
Number
TRADE ASSISTANCE FOR INDUCTION HARDENING OF INLET CAMSHAFT
Description
TRADE ASSISTANCE FOR INDUCTION HARDENING OF INLET CAMSHAFT
Specification
TRADE ASSISTANCE FOR INDUCTION HARDENING OF INLET CAMSHAFT
Testing / Inspection Facility
00
270
Number
TRADE ASSISTANCE FOR INDUCTION HARDENING OF EXHAUST CAMSHAFT
Description
TRADE ASSISTANCE FOR INDUCTION HARDENING OF EXHAUST CAMSHAFT
Testing / Inspection Facility
00
270
Number
STEEL FLAT 82 MM. X 28 MM X 25 MM EN-36A
Description
STEEL FLAT 82 MM. X 28 MM X 25 MM EN-36A
Specification
STEEL FLAT 82 MM. X 28 MM X 25 MM EN-36A
Testing / Inspection Facility
10
5918
Kilogram
STEEL STRIP, 1mm THICK X90X2M.L STEEL STRIP 1MM THICK + 0.35X90MM + 15X2MTS. OR MULTIPLE OF 285MM.
Description
STEEL STRIP, 1mm THICK X90X2M.L STEEL STRIP 1MM THICK + 0.35X90MM + 15X2MTS. OR MULTIPLE OF 285MM.
Specification
STEEL STRIP, 1mm THICK X90X2M.L STEEL STRIP 1MM THICK + 0.35X90MM + 15X2MTS. OR MULTIPLE OF 285MM.
Testing / Inspection Facility
01
5000
Kilogram
STEEL ROD 32mm (+0.5MM-0MM) DIA, TO SPECN BS:970 PT-I:1983, GD-708 M-40
Description
STEEL ROD 32mm (+0.5MM-0MM) DIA, TO SPECN BS:970 PT-I:1983, GD-708 M-40"T"(EN-19A) V.D. IN HR PEELED & ANNEALED COND (240 HV MAX) MAINTAINED S&P COMBINED= .022%MAX.(%S-01MAX & %P-015 MAX.) TO LENGTH SIZE-490 MM (-1.0MM) FOR BARREL
Specification
STEEL ROD 32mm (+0.5MM-0MM) DIA, TO SPECN BS:970 PT-I:1983, GD-708 M-40"T"(EN-19A) V.D. IN HR PEELED & ANNEALED COND (240 HV MAX) MAINTAINED S&P COMBINED= .022%MAX.(%S-01MAX & %P-015 MAX.) TO LENGTH SIZE-490 MM (-1.0MM) FOR BARREL
Testing / Inspection Facility
03
17774
Kilogram
STEEL ROD 16mm DIA, CD<A
Description
STEEL ROD 16mm DIA, CD<A
Specification
STEEL ROD 16mm DIA, CD<A
Testing / Inspection Facility
03
9167
Kilogram
28009
EOI/C/PV/2018
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001