28961
110170534
Ordnance Parachute Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
TAPE TUBULAR NYLON 14 MM UNDYED
Description
SPECN.NO.ADRDE/SPECN/1981/6.
Specification
SPECN.NO.ADRDE/SPECN/1981/6.
Testing / Inspection Facility
2101786814
22733
Metre
28962
110170533
Ordnance Parachute Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
TAPE TEXTILE NYLON TUB 36MM UNDYED BS 29000 N
Description
TAPE TEXTILE NYLON TUB.36MM UNDYED (BS 29000 N.)
Specification
SPECIFICATION NO. ADRDE/SPECN/1985/27(b) Except that : Twist (TPM) Yarn as per clause no. 4.1 only Roll Length 50 mtr. Excluding Sampling
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101786836
6257
Metre
28963
110170532
Ordnance Parachute Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
LEATHER CHAMOISE 1.5mm THICK (260x95 mm )
Description
SPECIFICATION NO.-As per approved sample
Specification
SPECIFICATION NO.-As per approved sample
Testing / Inspection Facility
2110021008
435
Number
28964
110170514
Ordnance Parachute Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
TAPE NYLON 66, 26mm TUBULAR BS 1850 KG
Description
TAPE NYLON 66, 26mm TUBULAR BS 1850 KG
ADRDE/SPECN/2000/54(c)
Specification
ADRDE/SPECN/2000/54(c)
Testing / Inspection Facility
2101797011
13136
Metre
28965
110170513
Ordnance Parachute Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
COIL SPRING RTU.
Description
DRAWING NO. : ADRDE/1041A-1/SA-1
Specification
DRAWING NO. : ADRDE/1041A-1/SA-1
Drawing no.
DRAWING NO. : ADRDE/1041A-1/SA-1
Testing / Inspection Facility
2110050007
252
Number
28966
110170512
Ordnance Parachute Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
TAPE NYLON 66,26 MM.B.S.550 KG.F.U/D
Description
ADRDE/SPCN/2000/54(b)
Specification
ADRDE/SPCN/2000/54(b)
Testing / Inspection Facility
2101797008
312122
Metre
28967
110170491
Ordnance Parachute Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
PULLEY BPLCA 1 3 01
Description
DRG. NO. 1.3.01-01(a)
Specification
DRG. NO. 1.3.01-01(a)
Drawing no.
DRG. NO. 1.3.01-01(a)
Testing / Inspection Facility
2110019023
416
Number
28968
EOI/Engg/2018
Ordnance Equipment Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
COLD ROLLED STEEL STRIP 22.00 MM WIDE X 0.8 MM THICK
Description
AS PER REQUIREMENT AND SPECIFICATION
Specification
AS PER REQUIREMENT AND SPECIFICATION
Testing / Inspection Facility
21
as per requirement
Number
CARBON STEEL STRIP 1.00MM THICKX18.00 MM WIDE
Description
AS PER REQUIREMENT AND SPECIFICATION
Specification
AS PER REQUIREMENT AND SPECIFICATION
Testing / Inspection Facility
21
as per requirement
Number
CARBON STEEL STRIP SIZE 1.00 MM THICK X 102 MM WIDE
Description
AS PER REQUIREMENT AND SPECIFICATION
Specification
AS PER REQUIREMENT AND SPECIFICATION
Testing / Inspection Facility
21
as per requirement
Number
IRON HOOP 23 BG (0.71 MM) THICK X 12 MM WIDE
Description
IS: 1029-1970
Specification
IS: 1029-1970
Testing / Inspection Facility
21
as per requirement
Number
IRON/STEEL STRIP LARGE
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Testing / Inspection Facility
21
as per requirement
Number
SPRING STEEL STRIP 15 MM X 1 MM THICK
Description
IS: 2507-1965 GRADE-1 OR 2
Specification
IS: 2507-1965 GRADE-1 OR 2
Testing / Inspection Facility
21
as per requirement
Kilogram
SPRING STEEL STRIP 55MM X 1.60 MM THICK
Description
IS:2507 GR.4 ANNEALED
Specification
IS:2507 GR.4 ANNEALED
Testing / Inspection Facility
21
as per requirement
Kilogram
STEEL STRIP MEDIUM GRADE HAVING 20 MM WIDTH AND 0.9MM THICKNESS
Description
IS: 1029-1970
Specification
IS: 1029-1970
Testing / Inspection Facility
21
as per requirement
Kilogram
PIN CARBON STEEL FOR TENT FOR HOT DIP GALVANISED
Specification
IS: 4826-79
Testing / Inspection Facility
21
as per requirement
Number
TWISTED PINS
Description
PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015
Specification
PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015
Testing / Inspection Facility
21
as per requirement
Number
STEEL MILD TUBES OR PIPES VARIOUS
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Testing / Inspection Facility
21
as per requirement
Number
STEEL MILD SHEETS OR PLATES VARIOUS
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Testing / Inspection Facility
21
as per requirement
Number
CARBON STEEL ROD OR ROUNDS OR WIRES VARIOUS
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Testing / Inspection Facility
21
as per requirement
Number
STEEL MILD ANGLES VARIOUS
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Testing / Inspection Facility
21
as per requirement
Number
STEEL SQUARES VARIOUS
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Testing / Inspection Facility
21
as per requirement
Sheet
BOLTS & NUTS STEEL VARIOUS
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Testing / Inspection Facility
21
as per requirement
Number
TENT PIN ANGLE IRON MEDIUM
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Testing / Inspection Facility
21
as per requirement
Number
TENT DEES IRON 25MM X 20MM X 4MM
Specification
IND/GS/1416
Testing / Inspection Facility
21
as per requirement
Number
PIN TENT CARBON STEEL SMALL 8340-000508
Description
IND/GS/1630 (5836/PK) AND ZINCK COATING BY HOTDIP GALVANIZED
Specification
IND/GS/1630 (5836/PK) AND ZINCK COATING BY HOTDIP GALVANIZED
Testing / Inspection Facility
21
as per requirement
Number
PIN TENT ANGLE IRON MED.MK-II
Description
CQA(GS)/US/428 (5877/PK) & HOT DIP GALVANIZED TO IS:277-1985 4th Revision
Specification
CQA(GS)/US/428 (5877/PK) & HOT DIP GALVANIZED TO IS:277-1985 4th Revision
Testing / Inspection Facility
21
as per requirement
Number
PIN TENT ANGLE IRON MED. MK-2 FOR HOT DIP GALVANISED
Testing / Inspection Facility
21
as per requirement
Number
PIN TENT ANGLE IRON MED. MK-2
Description
CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986
Specification
CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986
Testing / Inspection Facility
21
as per requirement
Number
PIN CARBON STEEL SMALL
Description
IND/GS/1630 (5836/PK), CADMIUM PLATED AS PER IS:1572-1986
Specification
IND/GS/1630 (5836/PK), CADMIUM PLATED AS PER IS:1572-1986
Testing / Inspection Facility
21
as per requirement
Number
U PIN
Description
AS PER REQUIREMENT AND SPECIFICATION
Specification
AS PER REQUIREMENT AND SPECIFICATION
Testing / Inspection Facility
21
as per requirement
Number
28969
107MMETT18002248
Gun and Shell Factory
The General Manager,
28970
107MMETT18002253
Gun and Shell Factory
The General Manager,
28971
107MMETT18002245
Gun and Shell Factory
The General Manager,
28972
107MMETT18002250
Gun and Shell Factory
The General Manager,
28973
107MMETT18002242
Gun and Shell Factory
The General Manager,
28974
107MMETT18002243
Gun and Shell Factory
The General Manager,
28975
107MMETT18002244
Gun and Shell Factory
The General Manager,
28976
107MMETT18002246
Gun and Shell Factory
The General Manager,
28977
107MMETT18002247
Gun and Shell Factory
The General Manager,
28978
107MMETT18002249
Gun and Shell Factory
The General Manager,
28979
128MMETT17001025/G18SEO0301
Ordnance Factory Tiruchirapalli
The General Manager,
Name
Code
Quantity
Approx Value
Select
SUPPLY OF STUD AS PER DRG NO K 1302 WITH FIRMS MATERIAL
Description
SUPPLY OF STUD AS PER DRG NO.K-1302 WITH FIRMS MATERIAL
Specification
AS PER DRG NO.K-1302 WITH FIRMS MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
2412
Number
28980
RFI/REGD/ESTT./FORGING/2018
Rifle Factory Ishapur
The General Manager,
Name
Code
Quantity
Approx Value
Select
FORGING OF PISTON EXTENSION FOR RIFLE 5.56MM INSAS.
Description
FORGING OF PISTON EXTENSION AS PER RFI SK NO. 6422*-S FOR RIFLE 5.56MM. INSAS WITH FIRMS MATL..
Specification
FORGING OF PISTON EXTENSION AS PER RFI SK NO. 6422*-S FOR RIFLE 5.56MM. INSAS WITH FIRMS MATL..
Drawing no.
RFI SK NO. 6422*-S
Testing / Inspection Facility
70
0
Number
28981
OFMK/TM/V0000424217
Ordnance Factory Medak
The General Manager
Name
Code
Quantity
Approx Value
Select
BLOWER BODY, 675-71-CB216
Description
BLOWER BODY,675-71-CB216
Specification
BLOWER BODY,675-71-CB216
Testing / Inspection Facility
71
19
Number
28982
OFMK/TM/V000424417
Ordnance Factory Medak
The General Manager
Name
Code
Quantity
Approx Value
Select
DISC BRAKE, 765-12-CD256
Description
DISC BRAKE, 765-12-CD256
Specification
DISC BRAKE, 765-12-CD256
Testing / Inspection Facility
12
71
Number
28983
3173000814
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SLEEVE GAS REGULATOR TO DS CAT NO. 3120-004755 DC(I) NO. 25570-SA DT- 29.10.02
Description
SLEEVE GAS REGULATOR TO DS CAT NO. 3120-004755 DC(I) NO. 25570-SA DT- 29.10.02
Specification
SLEEVE GAS REGULATOR TO DS CAT NO. 3120-004755 DC(I) NO. 25570-SA DT- 29.10.02
Drawing no.
DS CAT NO. 3120-004755 DC(I) NO. 25570-SA DT- 29.10.02
Testing / Inspection Facility
70
894
Number
28984
3173000813
Small Arms Factory
The General Manager,
28985
3173000812
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
REAR END OUTER TUBE RETURN SPRING FOR MAG
Description
REAR END OUTER TUBE RETURN SPRINGPART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION.
Specification
REAR END OUTER TUBE RETURN SPRINGPART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION.
Drawing no.
DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17
Testing / Inspection Facility
70
568
Number
28986
3173000811
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Body Upper Feed Mechanism Slide 1005-006823
Description
As Per Drg. DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17 IN FINISHED CONDITION WITHOUT H.T. and Plating
Specification
As Per Drg.DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17 IN FINISHED CONDITION WITHOUT H.T. and Plating
Drawing no.
DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17
Testing / Inspection Facility
70
283
Number
28987
3173000810
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
BLANK FOR TRAY AS PER DRG.NO.SKM-864
Description
BLANK FOR TRAY AS PER DRG.NO.SKM-864
Specification
BLANK FOR TRAY AS PER DRG.NO.SKM-864
Drawing no.
DRG.NO.SKM-864
Testing / Inspection Facility
70
140
Number
28988
3173000809
Small Arms Factory
The General Manager,
28989
3173000808
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Rear Sight Cursor for MAG 7.62MM Drg No. 1005-000433
Description
AS PER DRG. DS CAT 1005-000433 DC (I) 26752-SA DTD. 03.04.2015
Specification
AS PER DRG. DS CAT 1005-000433 DC (I) 26752-SA DTD. 03.04.2015
Drawing no.
DS CAT 1005-000433 DC (I) 26752-SA DTD. 03.04.2015
Testing / Inspection Facility
70
337
Number
28990
OPF/ADVANCE VR/EOI/JANUARY-18/TAPE-01
Ordnance Parachute Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
TAPE NYLON TUBULAR 2.54 CM U/D 1850 KG
Description
AS PER PARTICULARS GIVEN IN SHEET NO.102 OF DRAWING NO. ADRDE/1164/A-7(a)
WIDTH - 25.4 MM,
THICKNESS - 2.35 MM (MAX)
MASS/METER - 36.5 GM (MAX.)
NO. OF ENDS - 316 +2 (GOLDEN THREAD AT CENTRE)
PICKS/CM - 10 INCLUDING BOTH LAYERS
B.S. - 1850 KG (MIN.)
WEAVE - TUBULAR PLAIN
Specification
AS PER PARTICULARS GIVEN IN SHEET NO.102 OF DRAWING NO. ADRDE/1164/A-7(a)
WIDTH - 25.4 MM,
THICKNESS - 2.35 MM (MAX)
MASS/METER - 36.5 GM (MAX.)
NO. OF ENDS - 316 +2 (GOLDEN THREAD AT CENTRE)
PICKS/CM - 10 INCLUDING BOTH LAYERS
B.S. - 1850 KG (MIN.)
WEAVE - TUBULAR PLAIN
Testing / Inspection Facility
2101786895
901
Metre
RIBBON NYLON 50 MM 250 KG U/D
Description
SPECN.NO:-ADRDE/QAC/TECH.PART/07/01(b).
Specification
SPECN.NO:-ADRDE/QAC/TECH.PART/07/01(b).
Testing / Inspection Facility
2101682191
106
Metre
TAPE VELCRO 25MM (FEMALE )
Description
SPECN-IS:8156-1981
Specification
SPECN-IS:8156-1981
Testing / Inspection Facility
2101221280
54
Metre
TAPE NYLON 21 MM BS:600 KGS U/D
Description
SPECN.NO:-ADRDE/SPECN/2000/54(b)
Specification
SPECN.NO:-ADRDE/SPECN/2000/54(b)
Testing / Inspection Facility
2110797692
11
Metre
TAPE NYLON 26 MM BS:450 KGS STEEL GREY
Description
SPECN-NO:-ADRDE/SPECN/1992/38
Specification
SPECN-NO:-ADRDE/SPECN/1992/38
Testing / Inspection Facility
2110797689
141
Metre
TAPE NYLON 44 MM BS:705 kg. STEEL GREY
Description
SPCEN.AS PER IS: 4228-1979.
Specification
SPCEN.AS PER IS: 4228-1979.
Testing / Inspection Facility
2101796992
46
Metre
TAPE NYLON 2.54 CM BS-227 KG STEEL GREY
Description
SPECN-ADDE/BP/3(c)
Specification
SPECN-ADDE/BP/3(c)
Testing / Inspection Facility
2101786917
25
Metre
TAPE NYLON 19 MM THICK BS 193 KG UNDYED.V. NO:2
Description
SPECN. NO. JSS:8315-6.
Specification
SPECN. NO. JSS:8315-6.
Testing / Inspection Facility
2101786819
6185
Metre
TAPE NYLON 2.6 CM MED. 600 KG STEEL GREY
Description
SPECIFICATION NO.:- ADDE/BP/1(b)
Specification
SPECIFICATION NO.:- ADDE/BP/1(b)
Testing / Inspection Facility
2101786937
428
Metre
TAPE COTTON SPECIAL 12.7MM SCOURED. (1)Specn No.IS:3255-79
Description
Except that in apperance finish and all other respects not
defined in this specn., the material shall conform to the
sealed pattern held in the custody of controller CQAT&C
Kanpur.There shall be no presence of starch. Scouring loss
Mild method is to be followed in lieu of severe method and shall not exceed 2% picks/cm (-1) tolerance to be permittd. In addition the firm shall get their name or trade mark woven/stamped alongwith seldvedges at a interval of one meter on either side of the tape.(2)Sampling plan and criteria of conformtty:as per QAI NO.CQAT&C/TC-8/11(b).(3)Packing Marking:As per relevant clause of specn.
Specification
Except that in apperance finish and all other respects not
defined in this specn., the material shall conform to the
sealed pattern held in the custody of controller CQAT&C
Kanpur.There shall be no presence of starch. Scouring loss
Mild method is to be followed in lieu of severe method and shall not exceed 2% picks/cm (-1) tolerance to be permittd. In addition the firm shall get their name or trade mark woven/stamped alongwith seldvedges at a interval of one meter on either side of the tape.(2)Sampling plan and criteria of conformtty:as per QAI NO.CQAT&C/TC-8/11(b).(3)Packing Marking:As per relevant clause of specn.
Testing / Inspection Facility
2101774701
188
Metre
TAPE NYLON 28 MM U/D 7500N BS,SPECNS.NO.-AS UNDER PARTCULARS
Description
1-LENGTH PER ROLL(MIN) --100M ---IS:1954
2-WIDTH IN MM 28 + - 0.5 ---IS:1954
3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702
4-MASS,gm,MAX --17gm ---IS:4727
5-BREAKING LOAD "N" MIN. --7500 ---IS:1969
6-TOTAL NO.OF ENDS(FULL WIDTH) --135 ----IS:1963
7-PICKS/CM --14 -----IS:1963
8-LINEAR DENSITY OF YARN,TEX WARP ---93.3
WEFT ---23.3 X 2
9-WEAVE PLAIN ----VISUAL (2 PICKS/SHED)
Specification
1-LENGTH PER ROLL(MIN) --100M ---IS:1954
2-WIDTH IN MM 28 + - 0.5 ---IS:1954
3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702
4-MASS,gm,MAX --17gm ---IS:4727
5-BREAKING LOAD "N" MIN. --7500 ---IS:1969
6-TOTAL NO.OF ENDS(FULL WIDTH) --135 ----IS:1963
7-PICKS/CM --14 -----IS:1963
8-LINEAR DENSITY OF YARN,TEX WARP ---93.3
WEFT ---23.3 X 2
9-WEAVE PLAIN ----VISUAL (2 PICKS/SHED)
Testing / Inspection Facility
2101786939
33609
Metre
TAPE TUB. NYLON 25.4 MM 1364 KG STEEL GREY
Description
IND/ADE/0068(c)
Specification
IND/ADE/0068(c)
Testing / Inspection Facility
2101786938
1053
Metre
TAPE TUBULAR NYLON 27 MM U/D BS 2000 KG.
Description
SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1
2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25
3.MASS/METERS,(gm) MAX 47
4-ENDS IN FULL WIDTH SUGGESTED 130
5.PICKS/CM SUGGESTED 12(INCLUDING BOTH LAYERS)
6.DENIER OF WARP/WEFT NOMINAL 840X3 /210X5
7.BREAKING STRENGTH kgf,min.N) 2000
8.TPM IN WARP/WEFT 100-200/100-200
Specification
SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1
2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25
3.MASS/METERS,(gm) MAX 47
4-ENDS IN FULL WIDTH SUGGESTED 130
5.PICKS/CM SUGGESTED 12(INCLUDING BOTH LAYERS)
6.DENIER OF WARP/WEFT NOMINAL 840X3 /210X5
7.BREAKING STRENGTH kgf,min.N) 2000
8.TPM IN WARP/WEFT 100-200/100-200
Testing / Inspection Facility
2101786935
1875
Metre
TAPE TUBULAR NYLON 22 MM 700 KG U/D.
Description
SPECN NO. ADDE/BP/1(b).
Specification
SPECN NO. ADDE/BP/1(b).
Testing / Inspection Facility
2101786934
630
Metre
TAPE NYLON 19 mm BS 1893 N STEEL GREY
Description
SPCEN NO.:- JSS:8315-6 ( V.NO.2)
Specification
SPCEN NO.:- JSS:8315-6 ( V.NO.2)
Testing / Inspection Facility
2101786933
348
Metre
TAPE ADHESIVE CLOTH BASED 50 MM U/D.
Description
SPECN. NO. IND/TC-SERIES.
Specification
SPECN. NO. IND/TC-SERIES.
Testing / Inspection Facility
2101786899
3124
Metre
TAPE NYLON 25.4 MM (BS 227 KG)
Description
SPCN. NO.ADDE/BP/3(c)
Specification
SPCN. NO.ADDE/BP/3(c)
Testing / Inspection Facility
2101786886
44817
Metre
TAPE TEXTILE NYLON 19MM NAVY BLUE (BS 1893 N) VARIETY NO.2.
Description
SPECIFICATION NO. :JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
Specification
SPECIFICATION NO. :JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
Testing / Inspection Facility
2101786820
1088
Metre
TAPE NYLON 13 MM THIN U/D BS 70 KG.
Description
SPECN. NO.:ADDE/BP/1(B).
Specification
SPECN. NO.:ADDE/BP/1(B).
Testing / Inspection Facility
2101776031
899324
Metre
TAPE COTTON SPECIAL 45 MM 0G
Description
SPEFICATION:IS:3255-1979
Specification
SPEFICATION:IS:3255-1979
Testing / Inspection Facility
2101774711
1377
Metre
TAPE PARA ARAMID(KEVLAR) 21 MM B.S.-800 KGf for B.P.L.C.A.
Description
SPECN-ADRDE/SPECN/2002/57 THE TAPE SHALL BE IN CONTINUOUS LENGTH OF 105 M (EXCLUTING SAMPLING ) WITHOUT ANY FLAG OTHERWISE THAT ROLL WILL BE TREATED AS SHORT LENGTH.
Specification
SPECN-ADRDE/SPECN/2002/57 THE TAPE SHALL BE IN CONTINUOUS LENGTH OF 105 M (EXCLUTING SAMPLING ) WITHOUT ANY FLAG OTHERWISE THAT ROLL WILL BE TREATED AS SHORT LENGTH.
Testing / Inspection Facility
2010797685
13450
Metre
TAPE NYLON 22 MM U/D BS 1180 KG.
Description
SPECIFICATION NO. :ADRDE/SPCN/1993/44.
Specification
SPECIFICATION NO. :ADRDE/SPCN/1993/44.
Testing / Inspection Facility
2101786859
724
Metre
TAPE NYLON 13 MM OG BS=260 KG.
Description
SPECIFICATION NO.:ADRDE/SPCN/1993/44.
Specification
SPECIFICATION NO.:ADRDE/SPCN/1993/44.
Testing / Inspection Facility
2101786858
2020
Metre
TAPE NYLON 16MM U/D BS 400KG.
Description
SPECIFICATION NO: ADRDE/SPECN/1993/44 ROLL LENGTH 100 MTR. EXCLUDING SAMPLING.
Specification
SPECIFICATION NO: ADRDE/SPECN/1993/44 ROLL LENGTH 100 MTR. EXCLUDING SAMPLING.
Testing / Inspection Facility
2101786857
85628
Metre
TAPE NYLON 30MM UNDYED (BS: 3300KG)
Description
SPECIFICATION NO: ADRDE/SPECN/70(b) ROLL LENGTH 100 MTR EXCLUDING SAMPLING.
Specification
SPECIFICATION NO: ADRDE/SPECN/70(b) ROLL LENGTH 100 MTR EXCLUDING SAMPLING.
Testing / Inspection Facility
2101776881
2781
Metre
ADHESIVE PLASTER (CLOTH BASE) WIDTH 10 CMS.
Description
SPECIFICATION NO.: JOHNSON PLAST BRAND Or Equivalent material.
Specification
SPECIFICATION NO.: JOHNSON PLAST BRAND Or Equivalent material.
Testing / Inspection Facility
2101010010
4940
Metre
TAPE NYLON TUBULAR 8MM UNDYED
Description
SPECN NO:-ADRDE/SPECN/1983/13(a)
Specification
SPECN NO:-ADRDE/SPECN/1983/13(a)
Testing / Inspection Facility
2101786808
560
Metre
RIBBON NYLON 50 MM UNDYED
Description
SPECIFICATION NO. : ADRDE/SPECN/1983/12(a). 50 MTR ROLL LENGTH EXCLUDING SAMPLING
Specification
SPECIFICATION NO. : ADRDE/SPECN/1983/12(a). 50 MTR ROLL LENGTH EXCLUDING SAMPLING
Testing / Inspection Facility
2101682250
273980
Metre
