DoO(C&S) Vendor Panel | Page ,98c633060bbd1b9de3e87b7d2239245fea693cbb

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofbqcvrcell[dot]ofb[at]ofb[dot]gov[dot]in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

30081

OLF/MM-2/T-1706011411/2017 DT.04/04/2017

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity
TRANSISTOR 2T830G ( L.F.NO.7441120101) Description TRANSISTOR 2T830G AS PER SPECN. NO. AA0.339.139 TU Specification TRANSISTOR 2T830G AS PER SPECN. NO. AA0.339.139 TU Drawing no. Manufacturing Technology Testing / Inspection Facility	74	86 Number
TRANSISTOR 2T3108V (L.F.NO.7441120065) Description TRANSISTOR 2T3108V AS PER DRG. /SPECN. NO.AAO.339.026TU Specification TRANSISTOR 2T3108V AS PER DRG. /SPECN. NO.AAO.339.026TU Drawing no. Manufacturing Technology Testing / Inspection Facility	74	86 Number
TRANSISTOR 2T208E (L.F.NO. 7441120056) Description TRANSISTOR 2T208E AS PER DRG./SPECN. NO. SHE3.365.007 TU Specification TRANSISTOR 2T208E AS PER DRG./SPECN. NO. SHE3.365.007 TU Drawing no. Manufacturing Technology Testing / Inspection Facility	74	86 Number
TRANSISTOR 2T825B LF NO 7440201138 Physical Verification needed Description TRANSISTOR 2T825B FOR 1G46(T-90) TO DRG NO. AA0.339.054TY Specification TRANSISTOR 2T825B FOR 1G46(T-90) TO DRG NO. AA0.339.054TY Drawing no. Manufacturing Technology ELECTRONICS ITEMS manufacturing_technology_files.docx Testing / Inspection Facility ELECTRONICS ITEMS testing_inspection_file.docx	74	231 Number

30082

OLF/MM-2/T-1706011743

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
HEATING PRISM(LF-2612863434) Description HEATING PRISM Specification AS PER DRAWING NO ATS5935080 Drawing no. Manufacturing Technology Testing / Inspection Facility	26	1530 Number
HEATING PRISM (LF-2612863418) Description HEATING PRISM Specification AS PER DRG. NO. ATS5935132 Drawing no. Manufacturing Technology Testing / Inspection Facility	26	1530 Number

30083

20170522/PV/1290/EOTF (ID:102MMETT17002121)

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
PAINT READY MIXED AIR DRYING MATT FINISH FOR GENERAL PURPOSE SPRAYING OG ALONG WITH THINNER COMPETIA Description ISC-220 TO IS:5-1994 (4th REV.) AMENDMENT NO. 1 Specification ISC-220 TO IS:5-1994 (4th REV.) AMENDMENT NO. 1 Drawing no. Manufacturing Technology Testing / Inspection Facility	21	4055 Litre

30084

20170528/PV/0878/EOT/F (T ID 102MMETT17002130)

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
WEB COTTON WHITE THIN 25MM (BLEACHED) Description WEB COTTON WHITE THIN 25MM (BLEACHED) Specification IS:6488-1987 reaffirmed 1997 (2nd Rev.) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	116325 Metre

30085

20170527/PV/0808(A)/NODAL/EOT/D

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
TAPE NYLON THIN 13MM OG Description TAPE NYLON THIN 13MM OG Specification DMSRDE/T&GS/92/403 EXCEPT ROLL LENGTH WHICH SHALL BE MTRS Drawing no. Manufacturing Technology Testing / Inspection Facility	21	33855 Metre

30086

20170527/PV/0808(A)/NODAL/EOT/D

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
TAPE NYLON THICK 25MM OG Description TAPE NYLON THICK 25MM OG Specification AS PER REQUIREMENT AND SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	44069 Metre

30087

20170527/PV/0808(A)/NODAL/EOT/D

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
TAPE NYLON THICK OG PFF SIZES FOR BAG KIT UNIVERSAL MARK-2 ONE SET CONSIST OF;(A) TAPE NYLON THICK OG 25MM=086 MTR, B) TAPE NYLON THICK OG 38 MM =5.10 MT, C) TAPE NYLON THICK 38MM=0.32 MTR) Description TAPE NYLON THICK OG PFF SIZES FOR BAG KIT UNIVERSAL MARK-2 ONE SET CONSIST OF;(A) TAPE NYLON THICK OG 25MM=086 MTR, B) TAPE NYLON THICK OG 38 MM =5.10 MT, C) TAPE NYLON THICK 38MM=0.32 MTR) Specification XX Drawing no. Manufacturing Technology Testing / Inspection Facility	21	44128 Set

30088

3173000701

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
MOUNTING TRIPOD FOR MAG Description MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Specification MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION 13289033e573cdfc05aff670d7632994.pdf Drawing no. 1005-000627 and it's parts 108 nos of drawings drawing_mounting_1-108_compress.pdf Manufacturing Technology As per drawing 13289033e573cdfc05aff670d7632994.pdf Testing / Inspection Facility As per drawing 13289033e573cdfc05aff670d7632994.pdf	72	130 Number

30089

110170487

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
PULLY SMALL Description PULLY SMALL Prov.Drg. NO. ADRDE/172(b). Specification Prov. Drg. NO. ADRDE/172(b). Drawing no. Prov.Drg. NO. ADRDE/172(b). Pulley_Large_AND_amp_Small_ADRDE_172_b_.pdf Manufacturing Technology Testing / Inspection Facility	2055100006	914 Number

30090

110170488

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
TOWING RING SMALL 14.5mm Description SPECN. NO.:.Drg.NO.ADRDE/77 (e) Specification SPECN. NO.:.Drg.NO.ADRDE/77 (e) Drawing no. Manufacturing Technology Testing / Inspection Facility	2110999002	13812 Number

30091

110170489

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
REEL Description DRG.NO ADRDE/1457. Specification DRG.NO ADRDE/1457. Drawing no. DRG.NO ADRDE/1457. Manufacturing Technology As per drawing/specification Reel_ADRDE_1457.pdf Testing / Inspection Facility As per drawing/specification Reel_ADRDE_1457.pdf	2110038035	175 Number

30092

110170496

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
Cordage Nylon Braided Cored 1785N Undyed Description Cordage Nylon Braided Cored 1785N Undyed Specification ADRDE/SPECN/100(b) Drawing no. Manufacturing Technology As per Specification/drawing ADRDE_SPECN_100_b.pdf Testing / Inspection Facility As per Specification/drawing ADRDE_SPECN_100_b.pdf	2101726674	100938 Metre

30093

OLF/MM-2/T-1706011742

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
ELECTRO HETD PROTECTIVE GLASS (LF-2690000195) Description ELECTRO HETD PROTECTIVE GLASS Specification AS PER DRG NO. AU5803005 Drawing no. Manufacturing Technology Testing / Inspection Facility	26	240 Number

30094

MPF/4070/PV/MTA/ITEM 4 & 5 Dt. 23/12/2017

Machine Tool Proto Type Factory

The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502

Name	Code	Quantity	Approx Value	Select
Manufacturing and Supply of Block to Drg. No. DW-1108-4022-12, Qty: 2 Nos Description Manufacturing and Supply of Block to Drg. No. DW-1108-4022-12, Qty: 2 Nos Specification Manufacturing and Supply of Block to Drg. No. DW-1108-4022-12, Qty: 2 Nos TERMS_AND_CONDITION_2.pdf INSTRUCTION_TO_TENDERERS.pdf Drawing no. DW-1108-4022-12 BLOCK.pdf Manufacturing Technology Testing / Inspection Facility	71	2 Number
Manufacturing and Supply of Bearing Housing to Drg. No. DW-1108-5801-13, Qty: 4 Nos Description Manufacturing and Supply of Bearing Housing to Drg. No. DW-1108-5801-13, Qty: 4 Nos Specification Manufacturing and Supply of Bearing Housing to Drg. No. DW-1108-5801-13, Qty: 4 Nos INSTRUCTION_TO_TENDERERS.pdf TERMS_AND_CONDITION_2.pdf Bearing_Housing_(1).pdf Drawing no. DW-1108-5801-13 Bearing_Housing_(1).pdf Manufacturing Technology Testing / Inspection Facility	71	4 Number

30095

OLF/MM-2/T-1706011741/2017 DTD.15.12.2017

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity
MICROCIRCUIT 564LA10 BKO.347.064TU24 (LF 7441120963) Description MICROCIRCUIT 564LA10 BKO.347.064TU24 (LF 7441120963) Specification MICROCIRCUIT 564LA10 BKO.347.064TU24 (LF 7441120963) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	272 Number
MICROCIRCUIT 153UB2 BKO.347.010TU1 (LF 7441120956) Description MICROCIRCUIT 153UB2 BKO.347.010TU1 (LF 7441120956) Specification MICROCIRCUIT 153UB2 BKO.347.010TU1 (LF 7441120956) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	172 Number
MICROCIRCUIT 564AG1 BKO.347.064TU32 (LF 7441120718) Description MICROCIRCUIT 564AG1 BKO.347.064TU32 (LF 7441120718) Specification MICROCIRCUIT 564AG1 BKO.347.064TU32 (LF 7441120718) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	86 Number
MICROCIRCUIT 140UD60IA (LF 7441120303) Description MICROCIRCUIT 140UD60IA (LF 7441120303) Specification MICROCIRCUIT 140UD60IA (LF 7441120303) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	172 Number
MICROCIRCUIT 564IE11 (LF 7441120248) Description MICROCIRCUIT 564IE11 (LF 7441120248) Specification MICROCIRCUIT 564IE11 (LF 7441120248) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	344 Number
MICROCIRCUIT 140UB7 (LF 7441120243) Description MICROCIRCUIT 140UB7 (LF 7441120243) Specification MICROCIRCUIT 140UB7 (LF 7441120243) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	1204 Number
MICROCIRCUIT 142EN5A BKO.347.098 TU3 (LF 7441120097) Description MICROCIRCUIT 142EN5A BKO.347.098 TU3 (LF 7441120097) Specification MICROCIRCUIT 142EN5A BKO.347.098 TU3 (LF 7441120097) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	136 Number
MICROCIRCUIT 133LA3 163.088.023 TU7/02 (LF7441120093) Description MICROCIRCUIT 133LA3 163.088.023 TU7/02 (LF7441120093) Specification MICROCIRCUIT 133LA3 163.088.023 TU7/02 (LF7441120093) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	1000 Number
MICROCIRCUIT 564TM2MM AEYAR 431200.136-01TY (LF 7441120088) Description MICROCIRCUIT 564TM2MM AEYAR 431200.136-01TY (LF 7441120088) Specification MICROCIRCUIT 564TM2MM AEYAR 431200.136-01TY (LF 7441120088) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	86 Number
MICROCIRCUIT 564LA7 BKO.347.064 TU1 (LF 7441120087) Description MICROCIRCUIT 564LA7 BKO.347.064 TU1 (LF 7441120087) Specification MICROCIRCUIT 564LA7 BKO.347.064 TU1 (LF 7441120087) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	272 Number

30096

MPF/4070/PV/MTA/ITEM 3 Dt. 23/12/2017

Machine Tool Proto Type Factory

The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502

Name	Code	Quantity	Approx Value	Select
Micro Switch Part No. DC-2C-XG0910.1A, 125-250 VAC, 1/4 HP, 125 VAC, Mexico 04-25 Make - Cherry Qty: 124 Nos Description Micro Switch Part No. DC-2C-XG0910.1A, 125-250 VAC, 1/4 HP, 125 VAC, Mexico 04-25 Make - Cherry Qty: 124 Nos Specification Micro Switch Part No. DC-2C-XG0910.1A, 125-250 VAC, 1/4 HP, 125 VAC, Mexico 04-25 Make - Cherry Qty: 124 Nos INSTRUCTION_TO_TENDERERS.pdf TERMS_AND_CONDITION_1.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	71	124 Number

30097

20170515/PV/0814/EOT/F (EID 102MMETT17002123)

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
TRADE FABRICATION OF FOLDABLE MULTIPURPOSE UTILITY BIN FOR 4M/2M Description TRADE FABRICATION OF FOLDABLE MULTIPURPOSE UTILITY BIN FOR 4M/2M Specification AS PER SPEC Drawing no. Manufacturing Technology Testing / Inspection Facility	21	50040 Number

30098

20170514/PV/1144/EOT/F (EID 102MMETT17002124)

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity
TRADE FABRICATION OF GROUND SHEET TPO FOR TEFS 4M COMPLETE INCLUDING PANNELING, HEMMING, EYELETING, ROPE FIXING AND PASSING Description TRADE FABRICATION OF GROUND SHEET TPO FOR TEFS 4M COMPLETE INCLUDING PANNELING, HEMMING, EYELETING, ROPE FIXING AND PASSING Specification AS PER SPEC Drawing no. Manufacturing Technology Testing / Inspection Facility	21	11510 Number
Fabrication of TEFS 4M Fly Inner Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	11798 Number
Fabrication of End Curtain of TEFS 4M/2M (Army) (Each set consisting of Two (2) Numbers) Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	13775 Set

30099

20170518/PV/1009/EOT/F (EID 102MMETT17002125)

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity
SEWING THREAD SPUN POLYESTER 145-D TEX/3VERIETY NO 5 T.NO. 70 NATURAL WHITE Description SEWING THREAD SPUN POLYESTER 145-D TEX/3VERIETY NO 5 T.NO. 70 NATURAL WHITE Specification IS: 9543-1980 and as in tender enquiry. Drawing no. Manufacturing Technology Testing / Inspection Facility	21	24301 Kilometer(km)
Sewing Thread Spun Polyester 145-D Tex/4 Variety No. 7T No. 50 Natural White Description Sewing Thread Spun Polyester 145-D Tex/4 Variety No. 7T No. 50 Natural White Specification IS:9543-1980 and as in tender enquiry. Drawing no. Manufacturing Technology Testing / Inspection Facility	21	10525 Kilometer(km)
Sewing Thread Spun Polyster 145/D/TEX/3 Khaki Description Sewing Thread Spun Polyster 145/D/TEX/3 Khaki Specification IS:9543-1980 V.No.5 Ticket No. 71 Drawing no. Manufacturing Technology Testing / Inspection Facility	21	3718 Kilometer(km)

30100

110170482

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
DENTRITE ADHESIVE Description AS PER REQUIREMENT & SPECIFICATION Specification SPECIFICATION : IS:9827-1981 Drawing no. Manufacturing Technology Testing / Inspection Facility	1003165400	144 Number

30101

110170483

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
RUBBER BAND ADRDE/540-A-5 Description AS PER REQUIREMENT Specification DRAWING NO. : ADRDE/540-A-5. Drawing no. DRAWING NO. : ADRDE/540-A-5. Manufacturing Technology Testing / Inspection Facility	2103679551	18225 Number

30102

110170485

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
TAPE COTTON 38MM OG SPECIAL Description SPECIFICATION NO.: IS: 3255-1979 Except that :- i) In appearance shade finish and in other respects not defined in this Specn. the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, KANPUR. (ii) There shall be no presence of starch (iii) Scouring loss mild method is to be followed in lieu of severe method & shall not exceed 2% (Two percent). (iv) Sampling plan as per annexure (B) attached. Packing and marking as per schedule No.CIT&C/PMS/65. Specification SPECIFICATION NO.: IS: 3255-1979 Except that :- i) In appearance shade finish and in other respects not defined in this Specn. the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, KANPUR. (ii) There shall be no presence of starch (iii) Scouring loss mild method is to be followed in lieu of severe method & shall not exceed 2% (Two percent). (iv) Sampling plan as per annexure (B) attached. Packing and marking as per schedule No.CIT&C/PMS/65 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101774710	3439 Metre

30103

20170519/PV/0973/EOT/F (EID 102MMETT17002126)

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
DEES STEEL 350MMX230MMX6.3MM Description DEES STEEL 350MMX230MMX6.3MM Specification CQA (GS)/US/426(a)EXCEPT SIZE (5757/PK) GALVANISED Drawing no. Manufacturing Technology Testing / Inspection Facility	21	71240 Number

30104

MPF/4070/PV/MTA/ITEM 1 & 2 Dt. 23/12/2017

Machine Tool Proto Type Factory

The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502

Name	Code	Quantity	Approx Value	Select
Junction Box, ex Enclosure, Size: 200X230X110 in mm - QTY: 5 NOS Description Junction Box, ex Enclosure, Size: 200X230X110 in MM. To House Terminal Connectors 0.5 mm2 -25 Nos, having following Configuration. (A) Material Should be of Aluminum Alloy LM-9TF as per BS-1490-1908/DIN 1725, (Part-2) Grade Al SII0Mg/AISI-12Cu (Material No. 3.2383) or ASTM:625-95 alloy A360-0. The Castings Shall Comply with the requirements of IS:617-1994, Designation 4635 and shall be supplied in T6 Solution Heat Treated and Precipitation Treated Condition. B) Junction Boxes need to be Hydrostatic Tested after Assembly of all Connectors. The JBs should withstand without signs of damage or leakage external water pressure of 0.1 BAR for a Period of 2 Hours. C) The Junction Boxes should have Thread Inserts to avoid Spoiling of Threads Done on Aluminum alloys QTY: 5 NOS Specification Junction Box, ex Enclosure, Size: 200X230X110 in MM. To House Terminal Connectors 0.5 mm2 -25 Nos, having following Configuration. (A) Material Should be of Aluminum Alloy LM-9TF as per BS-1490-1908/DIN 1725, (Part-2) Grade Al SII0Mg/AISI-12Cu (Material No. 3.2383) or ASTM:625-95 alloy A360-0. The Castings Shall Comply with the requirements of IS:617-1994, Designation 4635 and shall be supplied in T6 Solution Heat Treated and Precipitation Treated Condition. B) Junction Boxes need to be Hydrostatic Tested after Assembly of all Connectors. The JBs should withstand without signs of damage or leakage external water pressure of 0.1 BAR for a Period of 2 Hours. C) The Junction Boxes should have Thread Inserts to avoid Spoiling of Threads Done on Aluminum alloys QTY: 5 NOS INSTRUCTION_TO_TENDERERS.pdf Terms_and_Conditions.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	71	5 Number
Junction Box, ex Enclosure Size : 330X230X110 in mm - Qty: 6 Nos Description Junction Box, ex Enclosure Size : 330X230X110 in mm. To House Terminal Connectors 0.5 mm2 -75 Nos having following configuration (A) Material Should be of Aluminum Alloy LM-9TF AS Per BS-1490-1908/DIN 1725,(Part-2) Grade Al SII0Mg/AISI-12Cu (Material No. 3.2383) or ASTM:625-95 alloy A360-0, the Castings shall comply with the requirements of IS:617-1994, Designation 4635 and shall be supplied in T6 Solution Heat Treated and Precipitation Treated Condition (B) Junction Box Need to be Hydrostatic Tested after Assembly of all Connectors. The JBs should withstand without Signs of Damage or Leakage External Water Pressure of 0.1 Bar for a Period of 2 Hours C) The Junction Box should have Thread Inserts to Avoid Spoiling of Threads Done on Aluminum Alloys - QTY: 6 NOS Specification Junction Box, ex Enclosure Size : 330X230X110 in mm. To House Terminal Connectors 0.5 mm2 -75 Nos having following configuration (A) Material Should be of Aluminum Alloy LM-9TF AS Per BS-1490-1908/DIN 1725,(Part-2) Grade Al SII0Mg/AISI-12Cu (Material No. 3.2383) or ASTM:625-95 alloy A360-0, the Castings shall comply with the requirements of IS:617-1994, Designation 4635 and shall be supplied in T6 Solution Heat Treated and Precipitation Treated Condition (B) Junction Box Need to be Hydrostatic Tested after Assembly of all Connectors. The JBs should withstand without Signs of Damage or Leakage External Water Pressure of 0.1 Bar for a Period of 2 Hours C) The Junction Box should have Thread Inserts to Avoid Spoiling of Threads Done on Aluminum Alloys - QTY: 6 NOS INSTRUCTION_TO_TENDERERS.pdf Terms_and_Conditions.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	71	6 Number

30105

B20151334

Ordnance Factory Kanpur

The Sr.General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Moulded Nozzle Front as per Drg. No. SK-9734 (sheet 3) required for Stabilizer Assembly of Rocket Pinaka. Description Moulded Nozzle Front as per Drg. No. SK-9734 (sheet 3) required for Stabilizer Assembly of Rocket Pinaka. Specification As per Drg. No. SK-9734 (sheet 3) Drawing no. SK-9734 (sheets 3) SK-9734_Sh3_of_3_Moulded_Nozzle_Front.jpg SK-9734_Sh2_of_3_Moulded_Nozzle_Front.jpg SK-9734_Sh1_of_3_Moulded_Nozzle_Front.jpg Manufacturing Technology Testing / Inspection Facility	65	500 Number

30106

B20151198

Ordnance Factory Kanpur

The Sr.General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Fin Cylinder to Drg. No. SK-9432 required for Stabilizer Assembly of Rocket Pinaka Description Fin Cylinder to Drg. No. SK-9432 required for Stabilizer Assembly of Rocket Pinaka Specification As per Drg. No. SK-9432 Drawing no. SK-9432 SK-9432_Fin_Cylinder.jpg Manufacturing Technology Testing / Inspection Facility	65	500 Number

30107

110170481

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
HOUSING SUB ASSMBELY Description SPECN NO. ADRDE/786-SA-2 Specification SPECN NO. ADRDE/786-SA-2 Drawing no. Manufacturing Technology Testing / Inspection Facility	2110038022	320 Number

30108

110170484

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
CORD NYLON BRAIDED UNDYED 345 N CORELESS Description CORD NYLON BRAIDED UNDYED 345 N CORELESS Specification SPECN.NO.: ADRDE/SPECN/1987/31. appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, Kanpur. Sampling plan and criteria of conformity. As per anexure 11 (TC-8). Drawing no. Manufacturing Technology As Per Specification/Drawing ADRDE_SPECN_1987_31_Cordage_345N.pdf Testing / Inspection Facility As Per Specification/Drawing ADRDE_SPECN_1987_31_Cordage_345N.pdf	2101119845	339471 Metre

30109

110170480

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
RIBBON NYLON 50 MM UNDYED Description SPECIFICATION NO. : ADRDE/SPECN/1983/12(a). 50 MTR ROLL LENGTH EXCLUDING SAMPLING Specification SPECIFICATION NO. : ADRDE/SPECN/1983/12(a). 50 MTR ROLL LENGTH EXCLUDING SAMPLING Drawing no. Manufacturing Technology Testing / Inspection Facility	2101682250	111549 Metre

30110

B20151335

Ordnance Factory Kanpur

The Sr.General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Machining & Moulding of Nozzle Rear as per Drg. No. SK-9746 & Annexure A1, Annexure A2, Appendix A2, Appendix A3 and Appendix B14 to Appendix B17 required for Stabilizer Assembly of Rocket Pinaka Description Machining & Moulding of Nozzle Rear as per Drg. No. SK-9746 & Annexure A1, Annexure A2, Appendix A2, Appendix A3 and Appendix B14 to Appendix B17 required for Stabilizer Assembly of Rocket Pinaka. Specification As per Drg. No. SK-9746 SK_9746_Sh_4_of_4_Machining_and_Moulding_of_Nozzle_rear.jpg Annexure_A1_Pg_1_of_7_Nozzle_Rear_Finish.jpg Annexure_A1_Pg_2_of_7_Nozzle_Rear_Finish.jpg Annexure_A2_Pg_3_of_7_Nozzle_Rear_Finish.jpg Annexure_A2_Pg_4_of_7_Nozzle_Rear_Finish.jpg Appendix_A3_Pg_5_of_7_Nozzle_Rear_Finish.jpg Appendix_A3_Pg_6_of_7_Nozzle_Rear_Finish.jpg Appendix_A2_Pg_7_of_7_Nozzle_Rear_Finish.jpg Appendix_B14.jpg Appendix_B15.jpg Appendix_B16.jpg Appendix_B17.jpg Drawing no. SK-9746 SK_9746_Sh_1_of_4_Machining_and_Moulding_of_Nozzle_rear.jpg SK_9746_Sh_2_of_4_Machining_and_Moulding_of_Nozzle_rear.jpg SK_9746_Sh_3_of_4_Machining_and_Moulding_of_Nozzle_rear.jpg Manufacturing Technology Testing / Inspection Facility	65	800 Number

30111

RFI/ATH1020139/17-18/5.56mm

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
PICATINY RAIL TOP INVESTMENT CASTING FOR RIFLE 5.56MM EXCALIBUR. Description PICATINY RAIL TOP INVESTMENT CASTING FOR RIFLE 5.56MM EXCALIBUR, DRG. NO. RFI SK. 7626/S Specification MATERIAL IS:10343-1989 GRADE-28 ALT. MAT. BS 1346 : 1974 PART1 CLASS2 Drawing no. DRG. NO. RFI SK. 7626/S Picatiny_Rail_Top_Drawing.pdf Manufacturing Technology Testing / Inspection Facility	70	3244 Number

30112

ORDFYS/OFT//2017-18/MMR/E-PROC/TAR/13

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
COMPENSATOR AS PER DRG NO MIM K 1021 01 TAR Description COMPENSATOR AS PER DRG. NO. MIM - K -1021- 01 (TAR) Specification COMPENSATOR AS PER DRG. NO. MIM - K -1021- 01 (TAR) Drawing no. K 1021 Drg_Compensator_MIM.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE TESTING.pdf	70	2412 Number

30113

RFI/ATH1020220/17-18/5.56

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
I.C. OF CONNECTOR BUTT EXR OF RIFLE 5.56 MM EXCALIBUR MK.1 Description I.C. OF CONNECTOR BUTT EXR OF RIFLE 5.56 MM EXCALIBUR MK.1 Specification I.C. OF CONNECTOR BUTT EXR OF RIFLE 5.56 MM EXCALIBUR MK.1 TO RFI SK. NO. 7596 Drawing no. RFI SK. NO. 7596 Manufacturing Technology Testing / Inspection Facility	70	3845 Number

30114

RFI/ATH1020229/17-18/5.56

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
Butt Plastic (Solid) for 5.56mm Excalibur Description Butt Plastic (Solid) with single Moulded Plastic Piece for Rifle 5.56mm Excalibur Specification Butt Plastic (Solid) with single Moulded Plastic Piece for Rifle 5.56mm Excalibur Drawing no. RFI/SK No. 9154 Butt_PlasticSolid.pdf Manufacturing Technology Testing / Inspection Facility	70	3637 Number
FIRING PIN AS PER DRG No K 2015 WITH FIRMS MATERIAL Description FIRING PIN AS PER DRG No. K 2015 WITH FIRM'S MATERIAL Specification AS PER DRG No. K 2015 WITH FIRM'S MATERIAL Drawing no. K 2015 FIRING_PIN_DRAWING.pdf Manufacturing Technology AS PER DRAWING ATTACHED MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE TESTING.pdf	70	2262 Number

30115

20170503/PV/0804/EOT/F (EID 102MMETT17002116)

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
Tension spring steel .05 mm outer dia 340 mm long galvanised and tampered Description Tension spring steel .05 mm outer dia 340 mm long galvanised and tampered Specification Best trade quality. The firm must get sample approved from OEF KAnpur Drawing no. Manufacturing Technology Testing / Inspection Facility	21	600480 Number

30116

20170504/PV/1021/EOT/F (EID 102MMETT17002115)

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
PIN TENT ANGLE IRON MED.MK-II Description CQA(GS)/US/428 (5877/PK) & HOT DIP GALVANIZED TO IS:277-1985 4th Revision Specification CQA(GS)/US/428 (5877/PK) & HOT DIP GALVANIZED TO IS:277-1985 4th Revision Drawing no. Manufacturing Technology Testing / Inspection Facility	21	117917 Number

30117

3173000690

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD Description TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD Specification TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD Drawing no. DRG. NO.0204-03-03-16-26-000-00DD Drg_TRIGGER_GUARD_MOULDING_JVPC.pdf Manufacturing Technology Testing / Inspection Facility	70	450 Number

30118

3173000689

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
ROD FRONT SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-003-00DC Description ROD FRONT SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-003-00DC Specification ROD FRONT SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-003-00DC Drawing no. DRG.NO.0204-03-02-00-06-003-00DC Drg_ROD_FRONT_SPRING_RECOIL_JVPC.pdf Manufacturing Technology Testing / Inspection Facility	70	480 Number

30119

3173000688

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC SK-JVPC-108 Description BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm as per given sketch from provided material size 90x90x64 MM by SAF Specification BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm SK-JVPC-108 Drawing no. SK-JVPC-108/ Drg_blank_BARREL_EXTENSION_SK_JVPC_108.pdf Manufacturing Technology Testing / Inspection Facility	70	724 Number

30120

3173000687

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
TUBE REAR SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-001-00DC Description TUBE REAR SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-001-00DC Specification TUBE REAR SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-001-00DC Drawing no. DRG.NO.0204-03-02-00-06-001-00DC Drg_TUBE_REAR_SPRING_RECOIL_JVPC.pdf Manufacturing Technology Testing / Inspection Facility	70	480 Number

30121

3173000686

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB Description BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB Specification BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB Drawing no. DRG NO. 0204-03-02-03-22-005-00DB DRG_BUFFER_FOR_JVPC.pdf Manufacturing Technology Testing / Inspection Facility	70	480 Number

30122

3173000685

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
MUZZLE CAP MOULDING FOR JVPC Description MUZZLE CAP MOULDING FOR JVPC Specification MUZZLE CAP MOULDING FOR JVPC Drawing no. Drg. 0204-04-04-00-00-001-00DA DRG_MUZZLE_CAP_MOULDING_JVPC.pdf Manufacturing Technology Testing / Inspection Facility	70	590 Number

30123

160306FHPO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
LOADING TRAY RESERVE PT. NO. 1154765 Description LOADING TRAY RESERVE PT. NO. 1154765 Specification AS PER TE NO. 160306FHPO Drawing no. Manufacturing Technology Testing / Inspection Facility	90	40 Set

30124

17F001FHFO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
Radial Spherical Plain Bearing Drg. no. 4087402 Description Radial Spherical Plain Bearing Drg. no. 4087402 Specification As per TE no. 17F001FHFO uploaded on E-proc. portal. Drawing no. Manufacturing Technology Testing / Inspection Facility	90	12 Number

30125

2017000211

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Cloth Twill Weave Polyester & Cotton (20:80) 250 GSM Greenish Khaki 150 Cm Width(Min) Description Provisional Specification No. PROV/S/2599/TC-11/2009/ 02 As Per Relevant Clause Of Specification. Specification Provisional Specification No. PROV/S/2599/TC-11/2009/ 02 As Per Relevant Clause Of Specification. Drawing no. Manufacturing Technology Testing / Inspection Facility	21	169275 Metre

30126

2017000200

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity
Self Adhesive Polythene Bag Size 65x50 cm x 0.04 mm Description Self Adhesive Polythene Bag Size 65x50 cm x 0.04 mm thick Specification Self Adhesive Polythene Bag Size 65x50 cm x 0.04 mm thick Specification no. CQA(GS)/US/434(A) Except sealing shall be of Adhesive Type Drawing no. Manufacturing Technology Testing / Inspection Facility	21	82654 Number
Self Adhesive Polythene Bag Size 50x35 cm x zero point zero 4 mm Description Self Adhesive Polythene Bag Size 50 cm x 35 cm Thickness of polythene film 0.04 mm Specification Self Adhesive Polythene Bag Size 50 cm x 35 cm Thickness of polythene film 0.04 mm Specification no. CQA(GS)/US/434(a), Except that the sealing will be "Self Adhesive" Drawing no. Manufacturing Technology as per the attached file SELF_ADHESIVE_POLYTHENE_BAG_VARIOUS.pdf Testing / Inspection Facility as per the attached file SELF_ADHESIVE_POLYTHENE_BAG_VARIOUS.pdf	25	512678 Number
Self Adhesive Polythene Bag Size 80x50 cm x point zero 5 mm Description Self Adhesive Polythene Bag Size 80 cm x 50 cm. Thickness of Poly Film-0.05 mm Specification Self Adhesive Polythene Bag Size 80 cm x 50 cm. Thickness of Poly Film-0.05 mm Specification no. CQA(GS)/US/434(a). Except that the sealing will be "Self Adhesive" Drawing no. Manufacturing Technology as per the attached file SELF_ADHESIVE_POLYTHENE_BAG_VARIOUS.pdf Testing / Inspection Facility as per the attached file SELF_ADHESIVE_POLYTHENE_BAG_VARIOUS.pdf	21	267357 Number
Self Adhesive Polythene Bag Size 32x13.5 cm x 0.04 mm Description Self Adhesive Polythene Bag of Size 32x13.5 cm & 0.04 mm thick Specification Self Adhesive Polythene Bag of Size 32x13.5 cm & 0.04 mm thick Specification no. CQA(GS)/US/434(a). Except sealing shall be of Adhesive type Drawing no. Manufacturing Technology Testing / Inspection Facility	21	113270 Number
Self Adhesive Polythene bag of size 45x35cm and point 04 MM Thick Description SELF ADHESIVE POLYTHENE BAG OF SIZE - 45 X 35 CM & 0.04 MM THICK SPECIFICATION - CQA(GS)/US/434(a) Except sealing shall be of Adhesive type Specification SELF ADHESIVE POLYTHENE BAG OF SIZE - 45 X 35 CM & 0.04 MM THICK SPECIFICATION - CQA(GS)/US/434(a) Except sealing shall be of Adhesive type Drawing no. Manufacturing Technology as per attached list (Manufacturing Technology Files ) Self_Adhesive_poly_bag.pdf Testing / Inspection Facility as per attached list (Testing / Inspection Facility Files ) Self_Adhesive_poly_bag.pdf	21	270003 Number
Self Adhesive Polythene Bag Size 95x70 cm x point zero 5 mm Description Self Adhesive Polythene Bag Size 95 x 70 cm x 0.05 mm Specification Self Adhesive Polythene Bag Size 95 x 70 cm x 0.05 mm Specification no. CQA(GS)/US/434(a) Except sealing will be 'self adhesive" Drawing no. Manufacturing Technology as per the attached file SELF_ADHESIVE_POLYTHENE_BAG_VARIOUS.pdf Testing / Inspection Facility as per the attached file SELF_ADHESIVE_POLYTHENE_BAG_VARIOUS.pdf	21	11530 Number

30127

110170470

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
FAB.NYL.66,93 GM.U/DWIDTH 101+-1 CM.(EXCLUDING SELVEDGE) Description FAB.NYL.66,93 GM.U/DWIDTH 101+-1 CM.(EXCLUDING SELVEDGE) Specification SPECN-ADRDE/SPECN/2000/53(b) Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221320	14836 Metre

30128

110170468

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
RIP CORD ASSEMBLY PP BMK Description ADRDE/1323-G(c) Specification ADRDE/1323-G(c) Drawing no. ADRDE/1323-G(c) Rip_cord_assembly_ADRDE_1323_G_c_PART_1_.pdf Rip_cord_assembly_ADRDE_1323_G_c_PART_2.pdf Rip_cord_assembly_ADRDE_1323_G_c_PART_3.pdf Manufacturing Technology Testing / Inspection Facility	2110071029	301 Number

30129

110170465

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
FABRIC NYLON 109g U/D 91.4cm Description FABRIC NYLON 109g U/D 91.4cm Specification SPECN. NO.: ADRDE/SPECN/1985/28(c). Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221160	23383 Metre

30130

4002/OTE/PV/17TE211113

Machine Tool Proto Type Factory

The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502

Name	Code	Quantity	Approx Value	Select
MANUFACTURING OF SET OF BEVEL GEARS TO DRG.NO.675-55-162 AND 675-55-164(RAW MATERIAL WILL BE SUPPLIED BY MTPF)AS PER SCOPE OF WORK AND VENDOR QUALIFICATION CRITERIA WITH ANNEXURE-I&II ATTACHED Description MANUFACTURING OF SET OF BEVEL GEARS TO DRG.NO.675-55-162 AND 675-55-164(RAW MATERIAL WILL BE SUPPLIED BY MTPF)AS PER SCOPE OF WORK AND VENDOR QUALIFICATION CRITERIA WITH ANNEXURE-I&II ATTACHED Specification MANUFACTURING OF SET OF BEVEL GEARS TO DRG.NO.675-55-162 AND 675-55-164(RAW MATERIAL WILL BE SUPPLIED BY MTPF)AS PER SCOPE OF WORK AND VENDOR QUALIFICATION CRITERIA WITH ANNEXURE-I&II ATTACHED TERMS_AND_CONDITION.pdf Drawing no. 675-55-162 AND 675-55-164 TECHNICAL_DRAWING.pdf Manufacturing Technology Testing / Inspection Facility	80	150 Number

30131

20170494/PV/0969/EOT/F (T ID 102MMETT17002108)

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
Cloth Canvas Flax (Tow) 86 cms. wide Description JSS-8305-11:2007 (REV.NO. 1) Specification JSS-8305-11:2007 (REV.NO. 1) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	26110 Metre

30132

20170507/PV/1045(A)/EOT/F ( T ID 102MMETT17002117)

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
TAPE NYLON O.G. 25 MM (SPL) Description TAPE NYLON O.G. 25 MM (SPL) Specification PROV.SPCN.NO.DMSRDE/TKGS/84/318 Drawing no. Manufacturing Technology Testing / Inspection Facility	21	369504 Metre

30133

20170508/PV/0855(A)/EOT/F ( T ID 102MMETT17002118)

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
FIBER PIECES FOR CARRIER MENPACK Description FIBER PIECES FOR CARRIER MENPACK Specification FIBRE SHEET VULCANISED RED 0.8 MM THICK Drawing no. Manufacturing Technology Testing / Inspection Facility	21	20464 Set

30134

20170509/PV/1155(A)/EOT/F (T ID 102MMETT17002119)

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
NYLON FABRIC O.G. POLYURETHANE COATED (250 GM/SQR M) 91 CM Description IND/TC/2314 (a) Specification IND/TC/2314 (a) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	16700 Metre

30135

2017000212

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
FABRIC NYLON 220 GSM. WHITE WATER & OIL REPELLENT 100 CM Description IND/TC/0160 AS PER RELEVANT CLAUSE OF SPECIFICATION Specification IND/TC/0160 AS PER RELEVANT CLAUSE OF SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	9477 Metre

Proceed