NIV RIP CORD HANDLE FOR PTA-R WITH DOUBLE STOPPER BALL

CQA(GS)/US/564

• As per specification/drawing

• As per specification/drawing

NIV PACK OPENING SPRING ELASTIC EYE

NIV PACK OPENING SPRING ELASTIC EYE

• AS PER DRAWING/SPECIFICATION

• AS PER DRAWING/SPECIFICATION

SPECN-ADRDE/PAS/2004/01(a)

SPECN-ADRDE/PAS/2004/01(a)

NIV STIFFENER FOR RIP CORD PROTECTION FLAP PTA R

NIV STIFFENER FOR RIP CORD PROTECTION FLAP PTA R

• AS PER DRAWING/SPECIFICATION

• AS PER DRAWING/SPECIFICATION

NIV GROMMET 8MM WITH WASHER STAINLESS STEEL

DRAWING NO. CQA(GS)/US/561

• As Per Specification/Drawing

• As Per Specification/Drawing

DRAWING NO. CQA(GS)/US/559

DRAWING NO. CQA(GS)/US/559

• As per Drawing/Specification

• As per Drawing/Specification

As per Specification

SPCN.NO.IND/GS/1826(a)

PACK OPENING SPRING ELASTIC 440 MM

SPECIFICATION NO:- IND/GS/1827(a) EXCEPT LENGTH.

• As per Specification/drawing

• As per Specification/drawing

PACK OPENING SPRING ELASTIC SHORT 370 MM

SPECIFICATION NO.IND/GS/1827(a) EXCEPT LENGTH.

• As per Specification/drawing

• As per Specification/drawing

NIV PACK FRAME

DRAWING NO.CQA(GS)/US/557 except that :- Drg sheet No. 2 of 3 Dtd :24.04.2019

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

SPCN.NO.IND/GS/1815 (b)

SPCN.NO.IND/GS/1815 (b)

Sub-Assy of Spring for Auxiliary Spring PTA-R Parachute

CQA(GS)/US/563

• AS PER SPECIFICATION

• AS PER SPECIFICATION

SPECN. NO.ADRDE/1106-A-4-(a) (SHEET NO. 22)

SPECN. NO.ADRDE/1106-A-4-(a) (SHEET NO. 22)

SPEPCN/DRG. NO. Drg.no.ADRDE/1460-03-04 AND AS PER PARTICULARS

SPEPCN/DRG. NO. Drg.no.ADRDE/1460-03-04 AND AS PER PARTICULARS

SPECN/DRG.NO. Drg. no.ADRDE/1460-03-04 And as per particulars

SPECN/DRG.NO. Drg. no.ADRDE/1460-03-04 And as per particulars

SPECN/DRG.NO. Drg. no.ADRDE/1460-03-04 And as per particulars

SNAP HOOK STATIC LINE PTR-M WITH SAFETY PIN

DRAWING NO JSS: 5340-05:2014

DRAWING NO JSS: 5340-05:2014

• As per Drawing/Specification

• As per Drawing/Specification

CANOPY RELEASE ASSEMBLY WITH WIRE LOOP

DRAWING NO. ADRDE/1233(a)

DRAWING NO. ADRDE/1233(a)

• As per Drawing/Specification

• As per Drawing/Specification

METALLIC SLIDE FASTENER HEAVY DUTY 457M LONG OG

SPECH. NO.: IS : 3148

SPCN.NO.ADRDE/1210(b)

SPCN.NO.ADRDE/1210(b)

ADRDE/1210(b)

NIV TRIANGULAR D RING

DRAWING NO. CQA(GS)/US/560

• AS PER SPECIFICATION

• AS PER SPECIFICATION

AS PER SPECIFICATION

DRAWING NO. CQA(GS)/US/562

CANOPY RIGGING LINK DETACHABLE PTR M DS CAT NO 1670 000320

CANOPY RIGGING LINK DETACHABLE PTR M DS CAT NO 1670 000320

• As per Drawing/Specification

• As per Drawing/Specification

SPECN.NO.IND/GS/1802

SPECN.NO.IND/GS/1802

IND/GS/1802

SPECN.NO.IND/GS/1795

SPECN.NO.IND/GS/1795

SPECN.NO.IND/GS/1798

SPECN.NO.IND/GS/1798

SPECIFICATION NO. IS:7933-1975.

SPECIFICATION NO. IS:7933-1975.

SPECIFICATION NO. JSS:1670-03-2011(REV NO.2 )

SPECIFICATION NO. JSS:1670-03-2011(REV NO.2 )

JSS:1670-03-2011(REV NO.2 )

TEAR TAPE NYLON 44 MM,10000 N(TEARING STRENGTH=340-640 N)

ADRDE/SPECN/1980/4(b)

ADRDE/SPECN/1980/4(b)

• As Per Specification/Drawing

• As Per Specification/Drawing

ADRDE/1984/24

ADRDE/1984/24

TAPE NYLON 26 MM THIN 200 KG O.G.

ADDE/BP/1(B) WITH 20-30% ELONGATION & PROPER HEAT SETTING

• As per Specification/Drawing

• As per Specification/Drawing

SPECN-ADRDE/SPECN/1993/44

SPECN-ADRDE/SPECN/1993/44

ADRDE/1985/27 (b) with proper heat setting

ADRDE/1985/27 (b) with proper heat setting

ADRDE/1992/38 20-30% ELO.WITH PROPER HEAT SETTING

ADRDE/1992/38 20-30% ELO.WITH PROPER HEAT SETTING

ADRDE/1983/13

ADRDE/1983/13

ADDE/BP/1(b)with 20-30% elongation & proper heat setting.

ADDE/BP/1(b)with 20-30% elongation & proper heat setting.

ADDE/BP/1(b) with 20-30 % elongation & proper heat setting

ADDE/BP/1(b) with 20-30 % elongation & proper heat setting

ADDE/BP/1(b)with 20-30% elongation & proper heat setting

ADDE/BP/1(b)with 20-30% elongation & proper heat setting

ADDE/BP/1(b)with 20-30% elongation & proper heat setting

ADDE/BP/1(b)with 20-30% elongation & proper heat setting

ADDE/BP/1(b) with 20-30 % elongation & proper heat setting

ADDE/BP/1(b) with 20-30 % elongation & proper heat setting

TAPE NYLON 26 MM THIN 200 KG Undyed

ADDE/BP/1(b) with 20-30% elongation & proper heat setting

• As per Specification/drawing

• As per Specification/drawing

ADDE/BP/1(b)WITH 20-30% ELONGATION & PROPER HEAT SETTING.

ADDE/BP/1(b)WITH 20-30% ELONGATION & PROPER HEAT SETTING.

TAPE NYLON 26 MM 2150 kgf

Specn. No.- ADRDE/SPECN/70(b), variety No. 1 Page No. 15 of 25 as per No. ADRDE/QMS/TDTM/SPECN/85.

• As per Specn/Drg

• As per Specn/Drg

TAPE TUBULAR NYL 18 MM BS 700 KG U/D

ADRDE/SPECN/1992/38 (b)

• As per Specification/Drawing

• As per Specification/Drawing

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

specn.no:-ADRDE/QMS/TDTM/SPECN/93

specn.no:-ADRDE/QMS/TDTM/SPECN/93

ADRDE/1984/24

ADRDE/1984/24

ADDE/BP/1(b)WITH 20-30 % ELONGATION & PROPER HEAT SETTING.

ADDE/BP/1(b)WITH 20-30 % ELONGATION & PROPER HEAT SETTING.

ADRDE/1985/27(a) WITH PROPER HEAT SETTING

ADRDE/1985/27(a) WITH PROPER HEAT SETTING

ADRDE/BP/1(b) with 20-30 % elongation & proper heat setting

ADRDE/BP/1(b) with 20-30 % elongation & proper heat setting

TAPE COTTON 20MM, 27KG KHAKI

ADRDE/SPECN/1993/41

• As per Specification/drawing

• As per Specification/drawing

TAPE TEXTILE NYLON TUB.36MM UNDYED (BS 29000 N.)

SPECIFICATION NO. ADRDE/SPECN/1985/27(b) Except that : Twist (TPM) Yarn as per clause no. 4.1 only Roll Length 50 mtr. Excluding Sampling

• As per Specification/Drawing

• As per Specification/Drawing

SPECN-AS PER PARTICULARS WIDTH :27(+1,-0)MM THICKNESS :1.95 +-0.06MM WEIGHT/METER :30.5 GM(MAX) BREAKING STRENGTH :1200 KG(MIN) HEAT SETTING :PROPER HEAT SETTING EXTENSION :20-30%

SPECN-AS PER PARTICULARS WIDTH :27(+1,-0)MM THICKNESS :1.95 +-0.06MM WEIGHT/METER :30.5 GM(MAX) BREAKING STRENGTH :1200 KG(MIN) HEAT SETTING :PROPER HEAT SETTING EXTENSION :20-30%

WIDTH-15(+1/-0)MM,THICKNESS-0.50MM(MAX),WEIGHT/MTR-4.6gm(max. BREAKING STRENGTH :185 KG(MIN) HEAT SETTING :PROPER HEAT SETTING REQUIRED TOTAL NO.OF ENDS :120 NO. PICKS/CM :12 NO. DENIER OF YARN :(a)ENDS:245,(b)PICKS:210 TPM(RANG) :WARP:80-95,(b)WEFT:85-90 EXTENSION AT BREAK :20-30% WEAVE :OXFORD(2 ENDS WERKING AS ONE)

WIDTH-15(+1/-0)MM,THICKNESS-0.50MM(MAX),WEIGHT/MTR-4.6gm(max. BREAKING STRENGTH :185 KG(MIN) HEAT SETTING :PROPER HEAT SETTING REQUIRED TOTAL NO.OF ENDS :120 NO. PICKS/CM :12 NO. DENIER OF YARN :(a)ENDS:245,(b)PICKS:210 TPM(RANG) :WARP:80-95,(b)WEFT:85-90 EXTENSION AT BREAK :20-30% WEAVE :OXFORD(2 ENDS WERKING AS ONE)

SPECN-AS PER PARTICULARS. WIDTH : 26.5+-0.5 MM, THICKNESS :0.42MM(MAX) WEIGHT/METER :5.2 GM(MAX) BREAKING STRENGTH :150 KG(MIN) HEAT SETTING :PROPER HEAT SETTING IS REQUIRED WEAVE :2X2 BROKEN TWILL(2 ENDS WORKING AS ONE) TOTAL NO.OF ENDS :228 PICKS/CM :24 DENIER OF YARN :(a)ENDS:153,(b)PICKS :150 T.P.M.(RANGE) :(a)WARP:140-215,,(b)WEFT :165-215 EXTENSION AT BREAK :20-30%

SPECN-AS PER PARTICULARS. WIDTH : 26.5+-0.5 MM, THICKNESS :0.42MM(MAX) WEIGHT/METER :5.2 GM(MAX) BREAKING STRENGTH :150 KG(MIN) HEAT SETTING :PROPER HEAT SETTING IS REQUIRED WEAVE :2X2 BROKEN TWILL(2 ENDS WORKING AS ONE) TOTAL NO.OF ENDS :228 PICKS/CM :24 DENIER OF YARN :(a)ENDS:153,(b)PICKS :150 T.P.M.(RANGE) :(a)WARP:140-215,,(b)WEFT :165-215 EXTENSION AT BREAK :20-30%

Tape Nylon 25 MM BS 450 KG U/D

ADRDE/SPECN/1992/38(b)

• As Per Specification/Drawing

• As Per Specification/Drawing

SPECN.NO:-ADRDE/QMS/TDTM/SPECN/84.

SPECN.NO:-ADRDE/QMS/TDTM/SPECN/84.

SPECIFICATION NO.: JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II

SPECIFICATION NO.: JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II

TAPE TEXTILE NYLON TUBULAR 26 MM UNDYED (BS 17500 N)

SPECIFICATION NO.: ADRDE/SPECN/1985/27(b) Except that :- Twist (TPM) yarn as per clause no. 4.1 only. Roll Length 100 Mtr. including sampling.

• As Per Specification/Drawing

• As Per Specification/Drawing

SPECIFICATION NO. : ADRDE/SPECN/1981/6 100% Sampling/Inspection/Testing shall resorted to.

SPECIFICATION NO. : ADRDE/SPECN/1981/6 100% Sampling/Inspection/Testing shall resorted to.

SPECIFICATION NO. : ADDE/BP/3(c).

SPECIFICATION NO. : ADDE/BP/3(c).

SPECN.NO.ADRDE/SPECN/1981/6.

SPECN.NO.ADRDE/SPECN/1981/6.

SPECN. NO. ADRDE/QMS/TDTM/T/2009/02.

SPECN. NO. ADRDE/QMS/TDTM/T/2009/02.

ADRDE/SPECN/2002/57

ADRDE/SPECN/2002/57

SPECN. NO. ADRDE/2002/57.

SPECN. NO. ADRDE/2002/57.

ADRDE/SPECN/62.

ADRDE/SPECN/62.

SPEC. NO.IS:8156-1981.

SPEC. NO.IS:8156-1981.

SPCN:IS:8156-1981

SPCN:IS:8156-1981

SPECIFICATION NO. : ADRDE/SPECN/82.

SPECIFICATION NO. : ADRDE/SPECN/82.

SPECIFICATION NO. : IS ; 1719-1979

SPECIFICATION NO. : IS ; 1719-1979

SPECIFICATION :-JSS 8315-6

SPECIFICATION :-JSS 8315-6

SPECIFICATION:IND/ADE/0061

SPECIFICATION:IND/ADE/0061

SPECIFICATION NO. : IS:4228-1979

SPECIFICATION NO. : IS:4228-1979

SPECN.NO. IND/ADE/0069 (c).

SPECN.NO. IND/ADE/0069 (c).

SPECN.NO.: IS : 3255-1979 EXCEPT THAT :- i) In appearance shade finish and in other respect not defined in this Specn. the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, Kanpur. ii) There shall be no presence of starch. iii) Loss of scouring mild method is to be followed in lieu of severe Method and shall not exceed 2%. iv) Sampling plan & criteria for conformity and Packing & Marking :- as per CQAT&C/QAI/TC-8/11(b).

SPECN.NO.: IS : 3255-1979 EXCEPT THAT :- i) In appearance shade finish and in other respect not defined in this Specn. the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, Kanpur. ii) There shall be no presence of starch. iii) Loss of scouring mild method is to be followed in lieu of severe Method and shall not exceed 2%. iv) Sampling plan & criteria for conformity and Packing & Marking :- as per CQAT&C/QAI/TC-8/11(b).

SPECIFICATION NO. : IS : 8156:1994

SPECIFICATION NO. : IS : 8156:1994

SPECIFICATION NO. : IS : 8156:1994

SPECIFICATION NO. : IS : 8156:1994

SPECN NO.AS PER PARTICULARS WIDTH -30MM THICKNESS -2.10 +-0.02MM WEIGHT/M -36.1grm NOs OF ENDS -240 TEXT OF YARNS-38.4X3 WEAVE -BRAIDED

SPECN NO.AS PER PARTICULARS WIDTH -30MM THICKNESS -2.10 +-0.02MM WEIGHT/M -36.1grm NOs OF ENDS -240 TEXT OF YARNS-38.4X3 WEAVE -BRAIDED

SPECIFICATION :-WIDTH -26MM. THICKNESS-0.58+-.01 MM WT./MTR.-6.6 GM NO.OF ENDS-178+1 INTERLOCKING PICKS/CM-26 TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N

SPECIFICATION :-WIDTH -26MM. THICKNESS-0.58+-.01 MM WT./MTR.-6.6 GM NO.OF ENDS-178+1 INTERLOCKING PICKS/CM-26 TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N

SPECIFICATION:- WDTH-20MM ,THICKNESS-1.92+.02MM -.01MM WEGHT/MTR.-20.5 GM (MAX.) NO. OF ENDS-132,TEX OF YARN-38.5X3 BS. -5680N , WEAVE-BRAIDED

SPECIFICATION:- WDTH-20MM ,THICKNESS-1.92+.02MM -.01MM WEGHT/MTR.-20.5 GM (MAX.) NO. OF ENDS-132,TEX OF YARN-38.5X3 BS. -5680N , WEAVE-BRAIDED

SPECIFICATION:-WIDTH-30MM THICKNESS-0.40+ - 0.02MM WEIGHT/MTR-5.3GM (MAX.) NO.OF ENDS-87 PICKS/CM -16 TEX OF YARNS -WARP- 17.8X2 WEFT- 17.8X2 BREAKING STRENGTH-340 N (MIN.)

SPECIFICATION:-WIDTH-30MM THICKNESS-0.40+ - 0.02MM WEIGHT/MTR-5.3GM (MAX.) NO.OF ENDS-87 PICKS/CM -16 TEX OF YARNS -WARP- 17.8X2 WEFT- 17.8X2 BREAKING STRENGTH-340 N (MIN.)