28161
EOI/C/PV/2018
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
28162
128MMETT18001101/G685EO0314
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name
Code
Quantity
Approx Value
Select
STOCK BUTT TO DRG NO 29 P 0038STAR2 required for 0POINT315 Sporting Rifle
Description
STOCK BUTT TO DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle
Specification
AS PER DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
883
Number
28163
EOI/B/PV/2018
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
28164
OPEN ADVERTISEMENT No: ORDFYS/RFI/CPPP/Vendor Registration/18-19/MPM/04 - 30-06 SPR and 0.315 SPR
Rifle Factory Ishapur
The General Manager,
Ishapore
Ishapore
West Bengal
743144
Name
Code
Quantity
Approx Value
Select
CPP HOLLOW CORRUGATED BOX TO DRG.NO.RFI SK.NO.6431*4(TO HOLD 5 NOS. RIFLE)
Description
CPP HOLLOW CORRUGATED BOX TO DRG.NO.RFI SK.NO.6431*4(TO HOLD 5 NOS. RIFLE) FOR 30-06, 0.22", .315" SPORTING RIFLE & 12 BORE PAG.
Specification
CPP HOLLOW CORRUGATED BOX TO DRG.NO.RFI SK.NO.6431*4(TO HOLD 5 NOS. RIFLE) FOR 30-06, 0.22", .315" SPORTING RIFLE & 12 BORE PAG.
Drawing no.
DRG.NO.RFI SK.NO.6431*4
Testing / Inspection Facility
70
500
Number
TRIGGER FOR 30-06 SPORTING RIFLE
Description
TRIGGER FOR 30-06 SPORTING RIFLE DRG. NO. TSP-706
Specification
STEEL BS: 970, 070 M55 (EN 9)
Drawing no.
DRG. NO. TSP-706
Testing / Inspection Facility
70
500
Number
STOCK FORE END (SEMI FINISH) RFI SK. 7637*2 FOR 0.315 SPORTING RIFLE
Description
STOCK FORE END (SEMI FINISH) RFI SK. 7637*2 FOR 0.315 SPORTING RIFLE
Specification
STOCK FORE END (SEMI FINISH) RFI SK. 7637*2 FOR 0.315 SPORTING RIFLE
Drawing no.
RFI SK. 7637*2
Testing / Inspection Facility
70
500
Number
BREATHABLE RAIN COAT NYLON FABRIC NAVY BLUE 100 CMS. (MIN), 135 + - 10 CMS.
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
BUFF VT SOLE BEND
Description
BP SECTION L/NO. BP/T&C/VT SOLE BEND/01 DATE 07.02.2013 AND AS IN TE
Specification
BP SECTION L/NO. BP/T&C/VT SOLE BEND/01 DATE 07.02.2013 AND AS IN TE
Testing / Inspection Facility
21
AS PER REQUIREMENT
Sq.centimetre
TAPE NYLON THIN/THICK OG OFF SIZES (FOR SYNTHETIC WEB EQUIPT. IMPROVED VERSION HAVERSACK) ONE SET CONSISTING OF THE FOLLOWINGS
Description
TAPE NYLON THIN/THICK OG OFF SIZES (FOR SYNTHETIC WEB EQUIPT. IMPROVED VERSION HAVERSACK) ONE SET CONSISTING OF THE FOLLOWINGS
Specification
PROV. SPECN.NO.DMSRDE/T&GS/92/403 & JSS:8315-6 FOR TAPE
Testing / Inspection Facility
21
AS PER REQUIREMENT
Set
PLY WOOD 7 PLY 12 MM THICK X 1500 MM X 750 MM
Description
IS:303-1989, REAFF.-1993, 3RD REVISION, AMDT.1 PLYWOOD MR/AA TYPE
Specification
IS:303-1989, REAFF.-1993, 3RD REVISION, AMDT.1 PLYWOOD MR/AA TYPE
Testing / Inspection Facility
21
AS PER REQUIREMENT
Number
BRASS HOOKS FOR HIGH ANKLE BOOT DVS
Description
IS:5041-2001 & APPENDIX "G" OF IND/TC/3844
Specification
IS:5041-2001 & APPENDIX "G" OF IND/TC/3844
Testing / Inspection Facility
21
AS PER REQUIREMENT
Number
CLOTH DUCK COTTON 475 GMS O.G. W.P 91 CM VAT DYED
Description
IS:1422:1983(V.NO.3)REAFF.2000 WITH AMDT.1 OF APR "87,AMDT.2
Specification
IS:1422:1983(V.NO.3)REAFF.2000 WITH AMDT.1 OF APR "87,AMDT.2
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
ALUMINIUM ALLOY SHEET SIZE 3 X 900 X 2400 MM.
Description
ALUMINIUM ALLOY SHEET SIZE 3 X 900 X 2400 MM.
Specification
IS : 737-1986 NS-5 1/4 HARD GRADE 53000 H-1
Testing / Inspection Facility
21
AS PER REQUIREMENT
Kilogram
PLATE BUTT FOR 30-06 SPR (DRG.NO. TSP-408)
Description
PLATE BUTT FOR 30-06 SPR (DRG.NO. TSP-408)
Specification
PLATE BUTT FOR 30-06 SPR (DRG.NO. TSP-408)
Drawing no.
DRG.NO. TSP-408
Testing / Inspection Facility
70
500
Number
28165
110170310 (VRR)
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
LAMINATED CLOTH HESSIAN 102 CM WIDE
Description
LAMINATED CLOTH HESSIAN 102 CM WIDE
Specification
SPECIFICATION NO. : IND/TC/2123(b)
Testing / Inspection Facility
2101464093
23153
Metre
28166
OCFS/PV/EOI/REG/2018/07 Vol. 1
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Name
Code
Quantity
Approx Value
Select
Interlining Fabric for Trouser (Stiffening Material)
Description
Interlining Fabric for Trouser (Stiffening Material)
Specification
IND/TC/2089 (a)
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
Interlining Fabric for Jacket (Insulating & Stiffening Material)
Description
Interlining Fabric for Jacket (Insulating & Stiffening Material)
Specification
As per Appendix É1'of specification no. IAFS 01042:2017.
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
Drill Cotton Proofed White Bleached 71 cm
Description
Drill Cotton Proofed White (Bleached) 71 cm
Specification
IND/TC/097 (c)
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
Cloth Cotton Calico White (Bld.) wide 91 cm. minimum
Description
IS:1544-1973( First Revision Reaffirmed 2007 AMDT:3)
Specification
IS:1544-1973( First Revision Reaffirmed 2007 AMDT:3)
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
Cloth Plain Weave Polyester & Viscose Dope Dyed Darker OG 150 cm
Description
As per Requirements & Specification
Specification
As per Requirements & Specification
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
Polyester Round Mesh Interlining Fabric
Description
Polyester Round Mesh Interlining Fabric OG width 102cm (Min.)
Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).
Specification
Polyester Round Mesh Interlining Fabric OG width 102cm (Min.)
Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
AS PER REQUIREMENT
Metre
Lining Fabric Blue Grey 100% Polyester Min Wd. 130 cm.
Description
Lining Fabric Blue Grey 100% Polyester Min Wd. 130 cm.
Specification
As per Appendix É1'of specification no. IAFS 01042:2017
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
HDPE Woven fabric
Description
As per Requirements & Specifications
Specification
As per Requirements & Specifications
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
Yarn Wool Polyamide (80:20) 240 Tex Red
Description
As Per Specification & Requirement
Specification
As Per Specification & Requirement
Testing / Inspection Facility
21
AS PER REQUIREMENT
Kilogram
Yarn wool Polyamide 240 Tex Navy Blue
Description
No. "OCFS/YARN WOOL POLY AMIDE (80:20) 240 TEX OG/2012" Except that Shade of the Yarn Shall be as per Pantone No. 19-3933 TPX & Annx-I
Specification
No. "OCFS/YARN WOOL POLY AMIDE (80:20) 240 TEX OG/2012" Except that Shade of the Yarn Shall be as per Pantone No. 19-3933 TPX & Annx-I
Testing / Inspection Facility
21
AS PER REQUIREMENT
Kilogram
28167
110170357 (VRR)
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
COTTON CANVAS 545 GR. O.G. 91.4 CM UNPROOFED VARIETY NO.3
Description
COTTON CANVAS 545 GR. O.G. 91.4 CM UNPROOFED VARIETY NO.3
Specification
SPCN. IS:1424-1970.
Testing / Inspection Facility
2101126248
970
Metre
Yarn Wool Polyamide (80:20) 240 Tex Air Force Blue
Description
As Per Requirements & Specifications
Specification
As Per Requirements & Specifications
Testing / Inspection Facility
21
AS PER REQUIREMENT
Kilogram
Yarn Wool Polyamide (80:20) 240 Tex OG
Description
OCFS/Yarn Wool Polyamide (80:20) 240Tex OG/2012
Specification
OCFS/Yarn Wool Polyamide (80:20) 240Tex OG/2012
Testing / Inspection Facility
21
AS PER REQUIREMENT
Kilogram
Yarn Worsted 55 Tex/2 Dark BG Shrink Resistant
Description
As per Requirements & Specifications
Specification
As per Requirements & Specifications
Testing / Inspection Facility
21
AS PER REQUIREMENT
Kilogram
Yarn Worsted 55 Tex/2 Dark OG
Description
As per requirements & specifications
Specification
As per requirements & specifications
Testing / Inspection Facility
21
AS PER REQUIREMENT
Kilogram
Yarn Worsted 80 Tex X 3 Dark OG
Description
PROV/OCFS/SOCKSYARNOG/64, Except that lot size & Sampling plan as per Appendix B
Specification
PROV/OCFS/SOCKSYARNOG/64, Except that lot size & Sampling plan as per Appendix B
Testing / Inspection Facility
21
AS PER REQUIREMENT
Kilogram
Yarn Worsted 80 Tex Dark OG
Description
PROV/OCFS/SOCKSYARNOG/64 Except that lot size & sampling plan as per Appendix B
Specification
PROV/OCFS/SOCKSYARNOG/64 Except that lot size & sampling plan as per Appendix B
Testing / Inspection Facility
21
AS PER REQUIREMENT
Kilogram
Fabric Suit Winter 150 cm Width Min
Description
Fabric Suit Winter 150 cm Width Min IAFS 01079:2015
Specification
IAFS 01079:2015
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
AS PER REQUIREMENT
Metre
Serge Battle Dress Poly Wool 142 Cms Minimum Width
Description
S/5432/PW/TC-19(a),Min Width 142 cms required to be water repellant & should conform to standard / values laid down in R/O the bundesmann test as mentioned in Clause 6.1(q) of above specification. Testing of % composition of Wool & polyester should be done as per IS: 2006-1988 2nd Revision Amendment No.1 & the method of Calculation to be based on dry mass basis only as per Clause 9.4.1 of specification.
Specification
S/5432/PW/TC-19(a),Min Width 142 cms required to be water repellant & should conform to standard / values laid down in R/O the bundesmann test as mentioned in Clause 6.1(q) of above specification. Testing of % composition of Wool & polyester should be done as per IS: 2006-1988 2nd Revision Amendment No.1 & the method of Calculation to be based on dry mass basis only as per Clause 9.4.1 of specification.
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
High Density Polyethene Dot Printed Fusible Interlining Fabric 90 cm minimum width
Description
IND/TC/2089(a)
Specification
IND/TC/2089(a)
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
FABRIC NYLON 75 GSM WHITE PU COATED 152 CMS (MINIMUM)
Description
IND/TC/0157 FIRM TRADE MARK IN ABBREVIATED FORM IN SMALLEST POSSIBLE LETTER TO BE PRINTED ON THE UNCOATED SIDE OF THE FABRIC ALONGSELVEDGE AT AN INTERVAL OF ONE METER. THE HEIGHT OF LETTERSHOULD NOT EXCEED 8MM. DARK/BRIGHT COLOUR TO BE AVOIDED.AS PER RELEVANT CLAUSE OF SPECIFICATION
Specification
IND/TC/0157 FIRM TRADE MARK IN ABBREVIATED FORM IN SMALLEST POSSIBLE LETTER TO BE PRINTED ON THE UNCOATED SIDE OF THE FABRIC ALONGSELVEDGE AT AN INTERVAL OF ONE METER. THE HEIGHT OF LETTERSHOULD NOT EXCEED 8MM. DARK/BRIGHT COLOUR TO BE AVOIDED.AS PER RELEVANT CLAUSE OF SPECIFICATION
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
Fabric Nylon Knitted Aluminized Coated 100 cm ( Min) Width
Description
Fabric Nylon Knitted Aluminized Coated 100 cm ( Min) Width
Specification No-IND/TC/0161
Specification
IND/TC/0161.
Packing & Marking- As per relevant clause of specification
Sampling Plan:- As per relevant clause of specification
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
Fabric Nylon Low Porosity 52 Gm ODS with 94 cm
Description
IS:4726-1984 (except air porosity test) and Firms name/trademark should be woven/stamped/embossed on the selvedge. in case of stamp, it should be neatly stamped on back side of fabric at an interval of 1(one) meter, without adding to any fabric defect like migration of stamping mark to the outside of the next layer of fabric when folded.
Specification
IS:4726-1984 (except air porosity test) and Firms name/trademark should be woven/stamped/embossed on the selvedge. in case of stamp, it should be neatly stamped on back side of fabric at an interval of 1(one) meter, without adding to any fabric defect like migration of stamping mark to the outside of the next layer of fabric when folded.
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
28168
OFDFYS/EFA/DAVP/01/2018/AVR/2018/01-1
Engine Factory Avadi
Chennai
Chennai
Chennai
Chennai, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
Pump Element...
Description
Pump Element...
Specification
Pump Element...
Testing / Inspection Facility
62
1500
Number
28169
OPEN ADVERTISEMENT No: ORDFYS/RFI/CPPP/Vendor Registration/18-19/MPM/04 - 5.56MM EXCALIBUR
Rifle Factory Ishapur
The General Manager,
Ishapore
Ishapore
West Bengal
743144
Name
Code
Quantity
Approx Value
Select
SEMI FINISH BLANK FOR HAMMER AS PER RFI SK.NO.6452*4-S(LATEST DC-NIL DT.21/07/01) FOR RIFLE 5.56MM INSAS.WITH FIRM'S MATL
Description
SEMI FINISH BLANK FOR HAMMER AS PER RFI SK.NO.6452*4-S(LATEST DC-NIL DT.21/07/01) FOR RIFLE 5.56MM INSAS.WITH FIRM'S MATL
Specification
SEMI FINISH BLANK FOR HAMMER AS PER RFI SK.NO.6452*4-S(LATEST DC-NIL DT.21/07/01) FOR RIFLE 5.56MM INSAS.WITH FIRM'S MATL
Drawing no.
RFI SK.NO.6452*4-S
Testing / Inspection Facility
70
5000
Number
LOCK EXR.TO DRG NO.RFI/SK.7332 FOR RIFLE 5.56MM.EXCALIBUR.
Description
LOCK EXR.TO DRG NO.RFI/SK.7332 FOR RIFLE 5.56MM.EXCALIBUR.
Specification
LOCK EXR.TO DRG NO.RFI/SK.7332 FOR RIFLE 5.56MM.EXCALIBUR.
Drawing no.
DRG NO.RFI/SK.7332
Testing / Inspection Facility
70
15000
Number
COVER BUSH CLAMP BUTT TO DRG.NO.RFI/SK.-7322 FOR RIFLE 5.56MM.EXCALIBUR.
Description
COVER BUSH CLAMP BUTT TO DRG.NO.RFI/SK.-7322 FOR RIFLE 5.56MM.EXCALIBUR.
Specification
COVER BUSH CLAMP BUTT TO DRG.NO.RFI/SK.-7322 FOR RIFLE 5.56MM.EXCALIBUR.
Drawing no.
DRG.NO.RFI/SK.-7322
Testing / Inspection Facility
70
15000
Number
PIN BUTTON TO DRG. NO.RFI/SK.-7316 FOR RIFLE 5.56MM.EXCALIBUR
Description
PIN BUTTON TO DRG. NO.RFI/SK.-7316 FOR RIFLE 5.56MM.EXCALIBUR
Specification
PIN BUTTON TO DRG. NO.RFI/SK.-7316 FOR RIFLE 5.56MM.EXCALIBUR
Drawing no.
DRG. NO.RFI/SK.-7316
Testing / Inspection Facility
70
15000
Number
LEVER CLAW TO DRG.NO.RFI/SK.-7323 FOR RIFLE 5.56MM.EXCALIBUR
Description
LEVER CLAW TO DRG.NO.RFI/SK.-7323 FOR RIFLE 5.56MM.EXCALIBUR
Specification
LEVER CLAW TO DRG.NO.RFI/SK.-7323 FOR RIFLE 5.56MM.EXCALIBUR
Drawing no.
DRG.NO.RFI/SK.-7323
Testing / Inspection Facility
70
15000
Number
Scrabbed of BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993(DC-26469-SA).(COMPLETE ASSY.).FOR RIFLE 5.56MM INSAS
Description
Scrabbed of BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993(DC-26469-SA).(COMPLETE ASSY.).FOR RIFLE 5.56MM INSAS
Specification
Scrabbed of BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993(DC-26469-SA).(COMPLETE ASSY.).FOR RIFLE 5.56MM INSAS
Testing / Inspection Facility
70
15000
Number
BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993(DC-26469-SA).(COMPLETE ASSY.).FOR RIFLE 5.56MM INSAS
Description
BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993(DC-26469-SA).(COMPLETE ASSY.).FOR RIFLE 5.56MM INSAS
Specification
BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993(DC-26469-SA).(COMPLETE ASSY.).FOR RIFLE 5.56MM INSAS
Testing / Inspection Facility
70
15000
Number
WALLET EMPTY(FOR 5.56MM. RIFLE & LMG)(TO ACCOMODATE 3 PIECECLEANING ROD & TOOLS/ACCESSORIES) TO DS CAT NO.3770-060959(SHT.-1 & SHT.-2)(DC-26353-SA)
Description
WALLET EMPTY(FOR 5.56MM. RIFLE & LMG)(TO ACCOMODATE 3 PIECECLEANING ROD & TOOLS/ACCESSORIES) TO DS CAT NO.3770-060959(SHT.-1 & SHT.-2)(DC-26353-SA)
Specification
WALLET EMPTY(FOR 5.56MM. RIFLE & LMG)(TO ACCOMODATE 3 PIECECLEANING ROD & TOOLS/ACCESSORIES) TO DS CAT NO.3770-060959(SHT.-1 & SHT.-2)(DC-26353-SA)
Testing / Inspection Facility
70
15000
Number
BAG TOOL SATCHEL TO DS CAT NO.5140-000278 (LT.DC-25827-SADT.- 30/07/03) FOR RIFLE 5.56MM.INSAS.
Description
BAG TOOL SATCHEL TO DS CAT NO.5140-000278 (LT.DC-25827-SADT.- 30/07/03) FOR RIFLE 5.56MM.INSAS.
Specification
BAG TOOL SATCHEL TO DS CAT NO.5140-000278 (LT.DC-25827-SADT.- 30/07/03) FOR RIFLE 5.56MM.INSAS.
Testing / Inspection Facility
70
15000
Number
PULL THROUGH FOR 5.56MM.1A(NYLON) TO DS CAT NO. 1005-557944(DC-26403-SA). CONSIST OF:- DS CAT NOS. 1)1005-557945( DC-25819-SA ). 2)1005-557946( DC-24847-SA )[1005-557947 &1005-118588] AND 3)4030-002838( DC-26461-SA )FOR RIFLE 5.56MM.INSAS.
Description
PULL THROUGH FOR 5.56MM.1A(NYLON) TO DS CAT NO. 1005-557944(DC-26403-SA). CONSIST OF:- DS CAT NOS. 1)1005-557945( DC-25819-SA ). 2)1005-557946( DC-24847-SA )[1005-557947 &1005-118588] AND 3)4030-002838( DC-26461-SA )FOR RIFLE 5.56MM.INSAS.
Specification
PULL THROUGH FOR 5.56MM.1A(NYLON) TO DS CAT NO. 1005-557944(DC-26403-SA). CONSIST OF:- DS CAT NOS. 1)1005-557945( DC-25819-SA ). 2)1005-557946( DC-24847-SA )[1005-557947 &1005-118588] AND 3)4030-002838( DC-26461-SA )FOR RIFLE 5.56MM.INSAS.
Testing / Inspection Facility
70
15000
Number
SLING ASSY.(BLACK COL.)TO DRG.NO.CQA(SA)SK-1000(DC-26480-SA)CONSIST.OF:- 1)CQA(SA)SK-1001(DC-26484-SA), 2)CQA(SA)SK-1002(DC-26480-SA), 3)1005-007992, 4)1005-007994, 5)1005-008031,6)1005-008032, 7)1005-008030, 8)1005-008029, 9)5360-007800(DC-26402-SA)
Description
SLING ASSY.(BLACK COL.)TO DRG.NO.CQA(SA)SK-1000(DC-26480-SA)CONSIST.OF:- 1)CQA(SA)SK-1001(DC-26484-SA), 2)CQA(SA)SK-1002(DC-26480-SA), 3)1005-007992, 4)1005-007994, 5)1005-008031,6)1005-008032, 7)1005-008030, 8)1005-008029, 9)5360-007800(DC-26402-SA) & 10)5315-010102.
Specification
SLING ASSY.(BLACK COL.)TO DRG.NO.CQA(SA)SK-1000(DC-26480-SA)CONSIST.OF:- 1)CQA(SA)SK-1001(DC-26484-SA), 2)CQA(SA)SK-1002(DC-26480-SA), 3)1005-007992, 4)1005-007994, 5)1005-008031,6)1005-008032, 7)1005-008030, 8)1005-008029, 9)5360-007800(DC-26402-SA) & 10)5315-010102.
Testing / Inspection Facility
70
15000
Number
CATCH COCKING HANDLE(MOULDING)(D/BLUE),DS CAT.NO.1005-560839(DC-26635-SA).CONSISTING OF: CATCH COCKING HANDLE TO DS CATNO.1005-007822(DC-26514-SA), ARDE SPECN NO. ARDE/SPECN/542(PROV).FOR RIFLE 5.56MM INSAS
Description
CATCH COCKING HANDLE(MOULDING)(D/BLUE),DS CAT.NO.1005-560839(DC-26635-SA).CONSISTING OF: CATCH COCKING HANDLE TO DS CATNO.1005-007822(DC-26514-SA), ARDE SPECN NO. ARDE/SPECN/542(PROV).FOR RIFLE 5.56MM INSAS
Specification
CATCH COCKING HANDLE(MOULDING)(D/BLUE),DS CAT.NO.1005-560839(DC-26635-SA).CONSISTING OF: CATCH COCKING HANDLE TO DS CATNO.1005-007822(DC-26514-SA), ARDE SPECN NO. ARDE/SPECN/542(PROV).FOR RIFLE 5.56MM INSAS
Testing / Inspection Facility
79
15000
Number
COVER BUSH CLAMP BUTT TO DRG.NO.RFI/SK.-7322 FOR RIFLE 5.56MM.EXCALIBUR.
Description
COVER BUSH CLAMP BUTT TO DRG.NO.RFI/SK.-7322 FOR RIFLE 5.56MM.EXCALIBUR.
Specification
COVER BUSH CLAMP BUTT TO DRG.NO.RFI/SK.-7322 FOR RIFLE 5.56MM.EXCALIBUR.
Drawing no.
DRG.NO.RFI/SK.-7322
Testing / Inspection Facility
70
15000
Number