DoO(C&S) Vendor Panel | Page ,aab6b5f59b0c8b74b2828eaa50b3752094c3950b

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofbqcvrcell[dot]ofb[at]ofb[dot]gov[dot]in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

26111

107/028/PV(A)/TE16-565/17-18/02

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
FABRICATION OF SHELL BODY (EMPTY) TO DRG. NO. NAI(J) 502/2 FROM RAW MATERIAL (I/CODE NO. 0353401032) TO BE SUPPLIED BY GSF- KOLKATA Description FABRICATION OF SHELL BODY (EMPTY) TO DRG. NO. NAI(J) 502/2 FROM RAW MATERIAL (I/CODE NO. 0353401032) TO BE SUPPLIED BY GSF- KOLKATA Specification AS PER DRAWING Drawing no. NAI-J-502-2_compressed.pdf Manufacturing Technology Testing / Inspection Facility	91	35000 Number

26112

ORDFYS/OCFAV/DAVP/17-18/PV/03/03

Ordnance Clothing Factory Avadi

The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054

Name	Code	Quantity
FASTENER HOOK AND LOOP TAPE SYNTHETIC Description FASTENER HOOK TAPE SYNTHETIC WHITE 25 MM, FASTENER HOOK TAPE SYNTHETIC SAGE GREEN 25 MM, FASTENER LOOP TAPE SYNTHETIC SAGE GREEN 25 MM Specification IS:8156 - 2014 Drawing no. Manufacturing Technology Testing / Inspection Facility	21	HOOK WHITE 25 MM - 27350 M, HOOK SAGE GREEN 25 MM - 111150 M, LOOP TAPE SAGE GREEN 25 MM - 162750 MM Metre
SEWING THREAD SPUN POLYESTER 125 D / TEX 3 PLY Description IND/TC/0296 (b) Specification IND/TC/0296 (b) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	SHADE : LIGHT BLUE - 5020 KM, WHITE - 4200 KM, KHAKI - 7900 KM, SAGE GREEN - 20870 KM Kilometer(km)
PLASTIC SLIDE FASTENER MEDIUM SPECIAL DUTY CLOSED END TYPE-E WITH TWO AUTO LOCK SLIDERS VARIOUS SIZES - SAGE GREEN SHADE Description PLASTIC SLIDE FASTENERS MEDIUM SPECIAL DUTY SAGE GREEN IN VARIOUS SIZES (69 CM, 71 CM, 73 CM & 75 CM.) Specification IS:14181-PART 1 TO 3 :2002 (REAFFIRMED 2008 WITH ALL AMENDMENTS) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	SIZE 69 CM - 15200 NOS., SIZE 71 CM - 35400 NOS., SIZE 73 CM - 30350 NOS., SIZE 75 CM - 18450 NOS. Number
NAPHTHALENE BALLS Description a) The balls shall be white in colour and conform to Grade 1 of IS: 539:1974 (Second Revision of Reaffirmed 1993) b) Approximately 130 +/-10 naphthalene balls shall weigh 1 kg. c) There shall be no stain on the woollen fabric when tested in accordance to the clause 4.2 of specification IS 539: 1974 (Second Revision of reaffirmed 1993) d) Naphthalene balls shall be supplied in polythene packets of 5 kgs each e) Sampling Plan: As per relevant clause of specification. Specification a) The balls shall be white in colour and conform to Grade 1 of IS: 539:1974 (Second Revision of Reaffirmed 1993) b) Approximately 130 +/-10 naphthalene balls shall weigh 1 kg. c) There shall be no stain on the woollen fabric when tested in accordance to the clause 4.2 of specification IS 539: 1974 (Second Revision of reaffirmed 1993) d) Naphthalene balls shall be supplied in polythene packets of 5 kgs each e) Sampling Plan: As per relevant clause of specification. Drawing no. Manufacturing Technology Testing / Inspection Facility	21	29760 Kilogram

26113

ORDFYS/OCFAV/DAVP/17-18/PV/03/03

Ordnance Clothing Factory Avadi

The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054

Name	Code	Quantity	Approx Value	Select
Cloth Plain Weave Polyester & Cotton White 138 cm(minimum) Width Excluding Selvedges Description IND/TC/0042(f) Specification IND/TC/0042(f) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	51400 Metre

26114

dsafsdfsdfsdf

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
BLADE FORE SIGHT- PISTOL AUTO Description BLADE FORE SIGHT TO DS CAT NO.1005-003197TO 1005-003201,1005-006582 & 1005-006583( LT DC-22727-SA DT. 21-11-94) FOR PISTOL AUTO 9MM 1A Specification BLADE FORE SIGHT TO DS CAT NO.1005-003197TO 1005-003201,1005-006582 & 1005-006583( LT DC-22727-SA DT. 21-11-94) FOR PISTOL AUTO 9MM 1A deemed_registration_certificate.pdf Drawing no. deemed_registration_certificate.pdf Manufacturing Technology Testing / Inspection Facility	70	4500 Packet

26115

OEFHz/OTE/20160008 Dated:06.05.2017

Ordnance Equipment Factory Hazaratpur

The General Manager,
Hazratpur
Hazratpur
Uttar Pradesh
283103

Name	Code	Quantity
TAPE WOVEN NYLON 30 MM WR UVR TREATED BLACK Description ADRDE/SPECN/70 Specification ADRDE/SPECN/70 Drawing no. Manufacturing Technology Testing / Inspection Facility	90	236881.56 Metre
TAPE WOVEN NYLON WR UVR TREATED BLACK 26MM (MENA - 40) Description AS PER SPECIFICATION Specification AS PER SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	90	98948.80 Metre
TAPE WOVEN NYLON WR UVR TREATED BLACK 26MM Description AS PER SPECIFICATION Specification AS PER SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	90	384368.38 Metre

26116

107/028/PV(A)/TE 16-933/17-18/01

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
MOULDING ASSEMBLY OF BODY WITH CONTACT Description MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94 Specification MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94 OTF.pdf Drawing no. OTF_(2).pdf Manufacturing Technology AS PER ATTACHMENT 3_4_5_pm.pdf Testing / Inspection Facility AS PER ATTACHMENT 3_4_5_pm.pdf	62	8202 Number

26117

OFD_O127-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity
CELL TO DRG.NO. , MCT-3237 FOR D-7 Description CELL TO DRG.NO. , MCT-3237 FOR D-7 Specification CELL TO DRG.NO. , MCT-3237 FOR D-7 Drawing no. MCT-3237 MCT_3237.jpg Manufacturing Technology Testing / Inspection Facility	74	220 Number
HEAD MCT-2445 Description HEAD MCT-2445 Specification HEAD MCT-2445 Drawing no. MCT-2445 Manufacturing Technology Testing / Inspection Facility	74	440 Number
PLATE MCT-2488 FOR D-7 Description PLATE MCT-2488 FOR D-7 Specification PLATE MCT-2488 FOR D-7 Drawing no. MCT-2488 MCT_2488.jpg Manufacturing Technology Testing / Inspection Facility	74	220 Number

26118

OEFHz/OTE/20170009 Dated:06.05.2017

Ordnance Equipment Factory Hazaratpur

The General Manager,
Hazratpur
Hazratpur
Uttar Pradesh
283103

Name	Code	Quantity	Approx Value	Select
WEBBING POLYESTER UVR-40 MM Description As per TE Specification As per TE Drawing no. As per Te Manufacturing Technology Testing / Inspection Facility	90	42041.80 Mtrs Metre

26119

OEFHz/OTE/20170007 Dated: 06.06.2017

Ordnance Equipment Factory Hazaratpur

The General Manager,
Hazratpur
Hazratpur
Uttar Pradesh
283103

Name	Code	Quantity	Approx Value	Select
UV ACCELERATED TESTER Description As per TE Specification As per TE Drawing no. As per TE Manufacturing Technology Testing / Inspection Facility	90	01 nos Number

26120

OEFHz/OTE/20170013 Dated:12.05.2017

Ordnance Equipment Factory Hazaratpur

The General Manager,
Hazratpur
Hazratpur
Uttar Pradesh
283103

Name	Code	Quantity	Approx Value	Select
Outsourcing of Pathology NABL Accreditaed /NABH Hospitals or Medical Colleges Laboratory Facility Description As per TE Specification As per TE Drawing no. As per TE Manufacturing Technology Testing / Inspection Facility	90	01 WJ Ample

26121

OEFHz/OTE/20160148 Dated:19.03.2017

Ordnance Equipment Factory Hazaratpur

The General Manager,
Hazratpur
Hazratpur
Uttar Pradesh
283103

Name	Code	Quantity	Approx Value	Select
11 KV 03 Core 120 SQMM Aluminium Conductor Armoured PVC Cable Description As per TE Specification As per TE Drawing no. AS per TE Manufacturing Technology Testing / Inspection Facility	90	500 Mtrs Metre

26122

OEFHz/OTE/20170016 Dated:13.05.2017

Ordnance Equipment Factory Hazaratpur

The General Manager,
Hazratpur
Hazratpur
Uttar Pradesh
283103

Name	Code	Quantity	Approx Value	Select
Sewing Thread Spun Poly 145 D TEX/6 OG Description As per TE Specification As per TE Drawing no. As per TE Manufacturing Technology Testing / Inspection Facility	90	6069 KMs Kilometer(km)

26123

OEFHz/OTE/20170015 Dated:13.05.2017

Ordnance Equipment Factory Hazaratpur

The General Manager,
Hazratpur
Hazratpur
Uttar Pradesh
283103

Name	Code	Quantity	Approx Value	Select
Netting Mosquito RM Poly FR White Description As per TE Specification As per TE Drawing no. As per TE Manufacturing Technology Testing / Inspection Facility	90	49099 Sets Set

26124

ORFHz/OTE/20170012 Dated: 12.05.2017

Ordnance Equipment Factory Hazaratpur

The General Manager,
Hazratpur
Hazratpur
Uttar Pradesh
283103

Name	Code	Quantity	Approx Value	Select
Nylon Webbing for APBS2950 KG Description As per TE Specification As per TE Drawing no. Manufacturing Technology Testing / Inspection Facility	90	9453.20 Mtrs Metre

26125

OEFHz/OTE/20170014 Dated: 13.05.2017

Ordnance Equipment Factory Hazaratpur

The General Manager,
Hazratpur
Hazratpur
Uttar Pradesh
283103

Name	Code	Quantity	Approx Value	Select
Cloth Calico Cotton White Description As per TE Specification As per TE Drawing no. As per TE Manufacturing Technology Testing / Inspection Facility	90	92078 mtrs Metre

26126

20160449

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
PVC Sheet for Bag Kit Description PVC sheet for Bag Kit Specification As per annexure "B"attached to specification no. S/2532/Bag Kit Universal (OG)/TC-6(a) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	463184 Number

26127

20170009

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
KAPOK INDIAN (SEMUL) VARIOUS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	115617 Kilogram

26128

2016000244

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Naphthalene balls Description As Per Requirement & Specification Specification As Per Requirement & Specification Drawing no. Manufacturing Technology Testing / Inspection Facility	10	24894 Number

26129

SAF/MMD/OTE/15-16/03

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
EXTRACTOR SPRING MAG Description EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION., Specification EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION., EXTRACTOR_SPRING_5360-000525.pdf Drawing no. DS CAT NO. 5360-000525 EXTRACTOR_SPRING_5360-000525.pdf Manufacturing Technology Coiling EXTRACTOR_SPRING_5360-000525.pdf Testing / Inspection Facility Chemical and Mechanical prosperities as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing. EXTRACTOR_SPRING_5360-000525.pdf	70	1804 Ample

26130

110MMETT17000820 (TE NO.110170007)

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
FABRICATION OF SOCKS WOOLEN DARK OG KNITTING AND LINKING Description FABRICATION OF SOCKS WOOLEN DARK OG (KNITTING & LINKING) Specification PROV/OCFS/SOCKS/ARMY/NEW (64) (a) Drawing no. Manufacturing Technology As Per Specification/Drawing PROV_OCFS_SOCKS_ARMY_NEW_64a.pdf Testing / Inspection Facility As Per Specification/Drawing PROV_OCFS_SOCKS_ARMY_NEW_64a.pdf	9911037217	169500 Pair

26131

SAF/MMD/OTE/16-17/IIC

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
MOUNTING TRIPOD FOR MAG Description MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION Specification MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION 13289033e573cdfc05aff670d7632994.pdf Drawing no. 1005-000627 and it's parts 108 nos of drawings drawing_mounting_1-108_compress.pdf Manufacturing Technology As per drawing 13289033e573cdfc05aff670d7632994.pdf Testing / Inspection Facility As per drawing 13289033e573cdfc05aff670d7632994.pdf	72	226 Number

26132

SAF/MMD/OTE/16-17/IIB

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
REBOUND TRIGGER FOR REVOLVER MK-III Description AS PER DRG. Specification AS PER DRG. Drawing no. PHMK_III_1_32_ALT.pdf Manufacturing Technology Testing / Inspection Facility	70	7108 Number

26133

116MMETT17002510

Ordnance Factory Kanpur

The Sr.General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Finish Machined Throat Insert as per Drg No SK 9043 with Appendix A4 and Appendix A5 for specification inspection parameters and acceptance criteria Physical Verification needed Description Finish Machined Throat Insert as per Drg. No. SK-9043 with Appendix A4 & Appendix A5 for specification, inspection parameters and acceptance criteria. Specification As per Appendix A4 & A5 and Drawing No. SK-9043 Drawing no. SK-9043 Drg__SK_9043.pdf Manufacturing Technology As per Appendix A4 & A5 and Drawing No. SK-9043 Appendix_A4_and_A5_for_throat_insert_of_Pinaka_MK-I.pdf Testing / Inspection Facility As per Appendix A4 & A5 and Drawing No. SK-9043 Appendix_A4_and_A5_for_throat_insert_of_Pinaka_MK-I.pdf	65	2775 Number

26134

SAF/MMD/OTE/16-17/IIG

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity
Rear Feed Pawl to DS CAT no. 1005-006638 in finished condition Description Rear Feed Pawl to DS CAT no. 1005-006638 in finished condition Specification Rear Feed Pawl to DS CAT no. 1005-006638 in finished condition Drawing no. DS CAT no. 1005-006638 1005-006637_006638.pdf Manufacturing Technology Testing / Inspection Facility	70	741 Number
PIN RETAINING CATCH FEED COVER Description Pin Retaining Catch Feed Cover in finished condition DS CAT No. 5315-001520 Specification Pin Retaining Catch Feed Cover in finished condition DS CAT No. 5315-001520 Drawing no. DS CAT No. 5315-001520 5315-001520.pdf Manufacturing Technology Testing / Inspection Facility	70	640 Number
CATCH HAMMER FOR REVOLVER .32 Description Catch Hammer to DRG No. PHMK-II-6-4 in finished condition Specification Catch Hammer to DRG No. PHMK-II-6-4 in finished condition Drawing no. PHMK-II-6-4 PHMK-II-6-4.pdf Manufacturing Technology Testing / Inspection Facility	70	7581 Number
Locating Key Gas Regulator Screw to DS CAT no. 5315-001505 Description Locating Key Gas Regulator Screw to DS CAT no. 5315-001505 Specification Locating Key Gas Regulator Screw to DS CAT no. 5315-001505 Drawing no. DS CAT no. 5315-001505 5315-001505.pdf Manufacturing Technology Testing / Inspection Facility	70	2306 Number
Investment Casting to DRG No. SK-37131 for Guard Back Sight Description Investment Casting to DRG No. SK-37131 for Guard Back Sight Specification Investment Casting to DRG No. SK-37131 for Guard Back Sight Drawing no. DRG No. SK-37131 sk-37131.pdf Manufacturing Technology Testing / Inspection Facility	01	1187 Number
STEEL TO BS:970 PT-1:1983 835M15 OR EN-39B SQUARE 90MM Description STEEL TO BS:970 PT-1:1983 835M15 OR EN-39B SQUARE 90MM Specification STEEL TO BS:970 PT-1:1983 835M15 OR EN-39B SQUARE 90MM Drawing no. Manufacturing Technology Testing / Inspection Facility	04	1215 Kilogram
Guide Cocking Handle Description Guide Cocking Handle (SKM-1013) for MAG7.62MM as per modified drawing Specification Guide Cocking Handle (SKM-1013) for MAG7.62MM as per modified drawing Drawing no. SKM-1013 SKM_1013.pdf Manufacturing Technology Testing / Inspection Facility	70	472 Number
Catch Cocking Handle Moulding Assy for LMG Description CATCH COCKING HANDLE MOULDING ASSY. DRG.NO.CQA(SA)SK-1275 FOR LMG 5.56MM Specification CATCH COCKING HANDLE MOULDING ASSY. DRG.NO.CQA(SA)SK-1275 FOR LMG 5.56MM Drawing no. Manufacturing Technology Machining & assy. Manufacturing_Technology_maching.pdf Testing / Inspection Facility as per attached document Manufacturing_Technology_maching.pdf	70	1749 Number
Spring Catch Barrel Description Spring Catch Barrel to DRG No. PH-1-12 in finished condition Specification Spring Catch Barrel to DRG No. PH-1-12 in finished condition Drawing no. DRG No. PH-1-12 PH_1_12.pdf Manufacturing Technology Testing / Inspection Facility	70	11670 Number
Catch Barrel to DRG No. PH-1-5 (without heat treatment) Description Catch Barrel to DRG No. PH-1-5 (without heat treatment) Specification Catch Barrel to DRG No. PH-1-5 (without heat treatment) Drawing no. DRG No. PH-1-5 PH_1_5.pdf Manufacturing Technology Testing / Inspection Facility	70	4158 Number
St. Flat 70X38MM Description ST.FLAT 70X38MM TO SPECN IS:6603-2001;DISIGNATION X12CR12 OR X20CR13 Specification ST.FLAT 70X38MM TO SPECN IS:6603-2001;DISIGNATION X12CR12 OR X20CR13 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	1250 Kilogram
WALLET EMPTY DS CAT NO. 3770-060959 FOR 5.56 MM LMG & RIFLE Description Wallet Empty (for 5.56MM RIFLE/LMG) to DRG. No. CQA(SA)SK468, DS CAT NO. 3770-060959, Sht.1 Consisting of DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(two sheets) Specification Wallet Empty (for 5.56MM RIFLE/LMG) to DRG. No. CQA(SA)SK468, DS CAT NO. 3770-060959, Sht.1 Consisting of DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(two sheets) Drawing no. DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959 wallet_ empty _ds_cat_no__3770-060959.pdf Manufacturing Technology Testing / Inspection Facility	71	1532 Number
Steel Investment Casting for CAP to DRG No. SK-38702 Description STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-38702 OF 9MM CARBINE 1A1 Specification STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-38702 OF 9MM CARBINE 1A1 Drawing no. SK-38702 SK_3870_2.pdf Manufacturing Technology Testing / Inspection Facility	01	4007 Number
DIA 64MM+/-0.5MM STEEL ROD Description DIA 64MM+/-0.5MM STEEL ROD TO SPECIFICATION IS:7283 1992 WITH MATERIAL TO CHEMICAL & MECHANICAL PROPERTY REQUIRMENTS OF IS:226 1975 FE 410-5 OR BS 970 PT1 :1991 GRADE 070 M 20 NORMALISED Specification DIA 64MM+/-0.5MM STEEL ROD TO SPECIFICATION IS:7283 1992 WITH MATERIAL TO CHEMICAL & MECHANICAL PROPERTY REQUIRMENTS OF IS:226 1975 FE 410-5 OR BS 970 PT1 :1991 GRADE 070 M 20 NORMALISED Drawing no. as per specification Manufacturing Technology Testing / Inspection Facility	01	13400 Kilogram
GRIP ASSY OF REVOLVER MK-III Description REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFTSUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITHINSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQUIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITION. D.A. NO. 09/11, DT. 26.04.11, Specification REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFTSUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITHINSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQUIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITION. D.A. NO. 09/11, DT. 26.04.11, Drawing no. As per drqwing PHMK_III_8_SA_PHMK_III_9_SA_PH_8_1_and_PH_9_1.pdf Manufacturing Technology Testing / Inspection Facility	70	8049 Number
Tube Middle Spring Recoil for JVPC 5.56 DRG No. 0204-03-02-00-06-002-00DC Description Tube Middle Spring Recoil for JVPC 5.56 DRG No. 0204-03-02-00-06-002-00DC Specification Tube Middle Spring Recoil for JVPC 5.56 DRG No. 0204-03-02-00-06-002-00DC Drawing no. DRG No. 0204-03-02-00-06-002-00DC Tube_Middle_Spring_Recoil.pdf Manufacturing Technology Testing / Inspection Facility	70	245 Number
St. Forging Plate Bottom to DRG No. SKM-2832 Description St. Forging Plate Bottom to DRG No. SKM-2832 Specification St. Forging Plate Bottom to DRG No. SKM-2832 Drawing no. SKM-2832 SKM_283_2.pdf Manufacturing Technology Testing / Inspection Facility	01	361 Number
Al. Forging for Body Cover DRG no. SKM-174* Description Al. Forging for Body Cover DRG No. SKM-174* Specification Al. Forging for Body Cover DRG No. SKM-174* Drawing no. SKM-174* SKM-174.pdf Manufacturing Technology Testing / Inspection Facility	06	388 Number
BUTT ASSEMBLY FOR RIFLE 5.56 MM Description Butt Assembly for Rifle 5.56MM to DS CAT NO. 1005-560064 with Butt Plastic to CQA(SA) SK-999 DS CAT NO.1005-560838 Note: The Item Will Be In Dark Blue Gray Colour, Colour Code-695 to Specn. IS 5:2007. Specification Butt Assembly for Rifle 5.56MM to DS CAT NO. 1005-560064 with Butt Plastic to CQA(SA) SK-999 DS CAT NO.1005-560838 Note: The Item Will Be In Dark Blue Gray Colour, Colour Code-695 to Specn. IS 5:2007. Drawing no. As per drg. butt_assy_.pdf Manufacturing Technology Testing / Inspection Facility	70	3393 Number
Machining of CAP of 9MM Carbine in finished condition Description Machining of CAP of 9MM Carbine in finished condition DS CAT No. 1005-000860 from I.C. Cap (Material will be supplied by SAF against B.G.) Specification Machining of CAP of 9MM Carbine in finished condition DS CAT No. 1005-000860 from I.C. Cap (Material will be supplied by SAF against B.G.) Drawing no. 1005-000860 1005_000860.pdf Manufacturing Technology Testing / Inspection Facility	70	3315 Number

26135

107MMETT16001839

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
P P CORRUGATED PACKING BOX TO DRG NO CO 519 Description P.P. CORRUGATED PACKING BOX TO DRG. NO. CO-519 Specification P.P. CORRUGATED PACKING BOX TO DRG. NO. CO-519 Drawing no. CO-519.pdf Manufacturing Technology AS PER ATTACHMENT 1074_210831112543_001.pdf Testing / Inspection Facility AS PER ATTACHMENT 1074_210831112543_001.pdf	14	800 Number

26136

107MMETT17001844

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
WOODEN PACKING BOX (TRANSIT) TO DRG. NO. CO-433/B IN F/C Description DRG NO CO-433/B FOR 84MM RL MK-II Specification DRG NO CO-433/B FOR 84MM RL MK-II Drawing no. CO_-_433B.pdf Manufacturing Technology Testing / Inspection Facility	14	164 Number

26137

SAF/MMD/OTE/16-17/IIF

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity
Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Specification Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Drawing no. DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 1005-008025.pdf Manufacturing Technology Testing / Inspection Facility	70	1847 Number
Cleaning Tool SA No.-2 MK-1 to DS CAT No. 1005-000768 Description Cleaning Tool SA No.-2 MK-1 to DS CAT No. 1005-000768 Specification Cleaning Tool SA No.-2 MK-1 to DS CAT No. 1005-000768 Drawing no. DS CAT No. 1005-000768 1005-008025.pdf Manufacturing Technology Testing / Inspection Facility	71	1847 Number
Wallet SA Spare Parts and Tools No Description Wallet SA Spare Parts & Tools No 2 MK 1 to DS CAT No 1005-000765 finished condition (4 Shts) Specification Wallet SA Spare Parts & Tools No. 2MK-1 to DS CAT No. 1005-000765 finished condition (4 Shts) _4_shts_Page_1.pdf Drawing no. DS CAT No. 1005-000765 1005-000765_-_Wallet_SA_spare_parts_and_Tools_No_2_Mk-1 _4_shts_Page_1.pdf 1005-000765_-_Wallet_SA_spare_parts_and_Tools_No_2_Mk-1 _4_shts_Page_2.pdf 1005-000765_-_Wallet_SA_spare_p Manufacturing Technology Sewings /Stitching Drawing_of_Wallet_SA_spare_parts_and_Tools_1.pdf Drawing_of_Wallet_SA_spare_parts_and_Tools_2.pdf Drawing_of_Wallet_SA_spare_parts_and_Tools_3.pdf Drawing_of_Wallet_SA_spare_parts_and_Tools_4.pdf Testing / Inspection Facility Chemical and Mechanical prosperities as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing. 1005-000765_-_Wallet_SA_spare_parts_and_Tools_No_2_Mk-1 _4_shts_Page_1.pdf 1005-000765_-_Wallet_SA_spare_parts_and_Tools_No_2_Mk-1 _4_shts_Page_2.pdf 1005-000765_-_Wallet_SA_spare_parts_and_Tools_No_2_Mk-1 _4_shts_Page_3.pdf 1005-000765_-_Wallet_SA_spare_parts_and_Tools_No_2_Mk-1 _4_shts_Page_4.pdf	71	1847 Number
Lantern Electric 1A Description AS PER DRG. Specification AS PER DRG. Drawing no. DS CAT No. Y3/6230-000012 LANTERN_ELECTRIC_1A _Y3-6230-000012.pdf Manufacturing Technology Optical LANTERN_ELECTRIC1A_Drawing_1.pdf LANTERN_ELECTRIC_Drawing_2.pdf LANTERN_ELECTRIC_Drawing_3.pdf Testing / Inspection Facility Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing LANTERN_ELECTRIC1A_Drawing_1.pdf LANTERN_ELECTRIC_Drawing_2.pdf LANTERN_ELECTRIC_Drawing_3.pdf	71	101 Number
3 Point Sling for JVPC to DRG No. 204 04 03 00 00 000 00DA Description 3 Point Sling for JVPC to DRG No. 204 04 03 00 00 000 00DA Specification 3 Point Sling for JVPC to DRG No. 204 04 03 00 00 000 00DA Drawing no. DRG No. 204 04 03 00 00 000 00DA 3_-_POINT_SLING_FOR_JVPC_5_56X30_mm.pdf Manufacturing Technology Testing / Inspection Facility	70	100 Number
Loop Sling Front to DRG No. 0204 03 02 37 39 002 00 DB Description Loop Sling Front to DRG No. 0204 03 02 37 39 002 00 DB Specification Loop Sling Front to DRG No. 0204 03 02 37 39 002 00 DB Drawing no. DRG No. 0204 03 02 37 39 002 00 DB Loop_SLing_Front.pdf Manufacturing Technology Testing / Inspection Facility	70	245 Number
Fore Sight Housing Description Fore Sight Housing to DS CAT No. 1005-000426 in without Heat Treatment Condition Specification Fore Sight Housing to DS CAT No. 1005-000426 in without Heat Treatment Condition Drawing no. DS CAT No. 1005-000426 FORE_SIGHT_HOUSING_1005-000426.pdf Manufacturing Technology Machining Drawing_of_Foresight_Housing.pdf Testing / Inspection Facility Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing Drawing_of_Foresight_Housing.pdf	70	370 Number
Catch Trigger to DRG No. PHMK-III-7-2 Description Catch Trigger to DRG No. PHMK-III-7-2 Specification Catch Trigger to DRG No. PHMK-III-7-2 Drawing no. DRG No. PHMK-III-7-2 PHMK-III-7-2_ALT.pdf Manufacturing Technology Testing / Inspection Facility	70	7829 Number
Leaf Spring Rear Sight Drg. No. 0204 03 02 00 01 009 00DC Description Leaf Spring Rear Sight Drg. No. 0204 03 02 00 01 009 00DC Specification Leaf Spring Rear Sight Drg. No. 0204 03 02 00 01 009 00DC Drawing no. Drg. No. 0204 03 02 00 01 009 00DC Leaf_Spring_Rear_Sight.pdf Manufacturing Technology Testing / Inspection Facility	70	270 Number
Guard Hand Assy. Upper (Steel Strip) Description Guard Hand Assy. Upper (Steel Strip) as per DS CAT No. 1005-560046 Note-The item will be in dark blue gray colour, Colour Code-695, to Specn. IS 5:2007 Specification Guard Hand Assy. Upper (Steel Strip) as per DS CAT No. 1005-560046 Note-The item will be in dark blue gray colour, Colour Code-695, to Specn. IS 5:2007 Drawing no. DS CAT No. 1005-560046 Guard_Hand_Assy__Upper_(Steel_Strip).pdf Manufacturing Technology Testing / Inspection Facility	70	2370 Number
PAWL HAMMER DRG NO. SK2689/170 Description Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition Specification Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition Drawing no. ARDE SK 2689/170 to DS CAT No. 3040-003115 3040-003115.pdf Manufacturing Technology Testing / Inspection Facility	70	2610 Number
Unit Burst Control DS CAT No.1005-007791 Description Unit Burst Control to DS CAT No. 1005-007791 in finished condition Specification Unit Burst Control to DS CAT No. 1005-007791 in finished condition Drawing no. DS CAT No. 1005-007791 Unit_Burst_Control.pdf Manufacturing Technology Testing / Inspection Facility	70	1645 Number
BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5 56 MM Physical Verification needed Description Block Fixing Pistol Grip to DRG No. ARDE SK-2689/121 (DS CAT No. 1005-007784) in finished condition Specification Block Fixing Pistol Grip to DRG No. ARDE SK-2689/121 (DS CAT No. 1005-007784) in finished condition Drawing no. DRG No. ARDE SK-2689/121 (DS CAT No. 1005-007784) Manufacturing Technology machining & assy. Manufacturing_Technology_maching.pdf Testing / Inspection Facility As per attached document of manufacturing & testing. Manufacturing_Technology_maching.pdf	70	5656 Number
FLASH ABSORBER FOR RIFLE 5.56 MM Description Flash Absorber to DS CAT No. 1005-007739 in finished condition Specification Flash Absorber to DS CAT No. 1005-007739 in finished condition Drawing no. DS CAT No. 1005-007739 1005-007739.pdf Manufacturing Technology Testing / Inspection Facility	70	2381 Number
Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 Description Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 Specification Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 Drawing no. DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 1005-008024.pdf Manufacturing Technology Testing / Inspection Facility	70	1606 Number
Handle Cocking Slide without Anodizing DRG No. SKM-1004 Description Handle Cocking Slide without Anodizing DRG No. SKM-1004 Specification Handle Cocking Slide without Anodizing DRG No. SKM-1004 Drawing no. DRG No. SKM-1004 Manufacturing Technology Testing / Inspection Facility	70	411 Number
Button Catch Magazine for JVPC 5.56MM DRG No. 0204-03-02-02-19-002-00DD Description Button Catch Magazine for JVPC 5.56MM DRG No. 0204-03-02-02-19-002-00DD Specification Button Catch Magazine for JVPC 5.56MM DRG No. 0204-03-02-02-19-002-00DD Drawing no. DRG No. 0204-03-02-02-19-002-00DD Button_Catch_Magazine.pdf Manufacturing Technology Testing / Inspection Facility	70	255 Number
Tube Rear Spring Recoil for JVPC 5.56MM DRG No. 0204-03-02-00-06-001-00DB Description Tube Rear Spring Recoil for JVPC 5.56MM DRG No. 0204-03-02-00-06-001-00DB Specification Tube Rear Spring Recoil for JVPC 5.56MM DRG No. 0204-03-02-00-06-001-00DB Drawing no. DRG No. 0204-03-02-00-06-001-00DB Tube_Rear_Spring_Recoil_(2).pdf Manufacturing Technology Testing / Inspection Facility	70	245 Number
Rod Front Spring Recoil for JVPC to DRG No. 0204-03-02-00-06-003-00DA Description Rod Front Spring Recoil for JVPC to DRG No. 0204-03-02-00-06-003-00DA Specification Rod Front Spring Recoil for JVPC to DRG No. 0204-03-02-00-06-003-00DA Drawing no. DRG No. 0204-03-02-00-06-003-00DA Rod_Front_Spring_Recoil.pdf Manufacturing Technology Testing / Inspection Facility	70	245 Number
Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 Specification PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 Drawing no. DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 1005-007789.pdf Manufacturing Technology Testing / Inspection Facility	70	5400 Number
Seating Collar Gas Regulator Sleeve to DS CAT No. 5360-007217 in finished condition Description Seating Collar Gas Regulator Sleeve to DS CAT No. 5360-007217 in finished condition Specification Seating Collar Gas Regulator Sleeve to DS CAT No. 5360-007217 in finished condition Drawing no. DS CAT No. 5360-007217 5360-007217.pdf Manufacturing Technology Testing / Inspection Facility	70	1616 Number
Pin Link in finished condition Description PIN LINK TO DS CAT NO.5315-001529 DC NO. 25365-SA DATED 16.5.02 IN FINISHED CONDITION. Specification PIN LINK TO DS CAT NO.5315-001529 DC NO. 25365-SA DATED 16.5.02 IN FINISHED CONDITION. Drawing no. DS CAT NO. 5315-001529 5315-001529.pdf Manufacturing Technology Testing / Inspection Facility	70	429 Number

26138

SAF/MMD/OTE/16-17/IIE

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
SEAR SK 2689/239 SOFT COND.L5 Description SEAR AS PER DRG.NO. ARDE/SK-2689/239 IN SOFT CONDITION DS CAT NO 1005-007736 DC(1)26524 SA DT-16.07.10., Specification SEAR AS PER DRG.NO. ARDE/SK-2689/239 IN SOFT CONDITION DS CAT NO 1005-007736 DC(1)26524 SA DT-16.07.10., Drawing no. As per drawing 1005_007736.pdf Manufacturing Technology Testing / Inspection Facility	70	6558 Number

26139

OFD_O130-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity
PLATE BEARING TO DRG.NO MCT-1118/2 FOR SIGHT UNIT CASED 102B Description PLATE BEARING TO DRG.NO MCT-1118/2 FOR SIGHT UNIT CASED 102B Specification PLATE BEARING TO DRG.NO MCT-1118/2 FOR SIGHT UNIT CASED 102B Drawing no. MCT-1118/2 MCT_1118_2.jpg Manufacturing Technology Testing / Inspection Facility	74	1231 Number
CELL GRATICULE TO DRG.MCT-1143/1 FOR SIGHT UNIT CASED 102B Description CELL GRATICULE TO DRG.MCT-1143/1 FOR SIGHT UNIT CASED 102B Specification CELL GRATICULE TO DRG.MCT-1143/1 FOR SIGHT UNIT CASED 102B Drawing no. MCT-1143/1 MCT_1118_2.jpg Manufacturing Technology Testing / Inspection Facility	74	1231 Number
FORE SIGHT DRG.NO.IRDE-1035/57 Description FORE SIGHT DRG.NO.IRDE-1035/57 Specification FORE SIGHT DRG.NO.IRDE-1035/57 Drawing no. IRDE-1035/57 MCT_1118_2.jpg Manufacturing Technology Testing / Inspection Facility	74	1231 Number
REAR SIGHT DRG.NO-IRDE-1035/58 Description REAR SIGHT DRG.NO-IRDE-1035/58 Specification REAR SIGHT DRG.NO-IRDE-1035/58 Drawing no. IRDE-1035/58 MCT_1118_2.jpg Manufacturing Technology Testing / Inspection Facility	74	1231 Number
THUMB PIECE TO DRG.NO.MCT-3246/1 (SHEET-2 OF 3) FOR SIGHT DIAL 104A Description THUMB PIECE TO DRG.NO.MCT-3246/1 (SHEET-2 OF 3) FOR SIGHT DIAL 104A Specification THUMB PIECE TO DRG.NO.MCT-3246/1 (SHEET-2 OF 3) FOR SIGHT DIAL 104A Drawing no. MCT-3246/1 (SHEET-2 OF 3) Manufacturing Technology Testing / Inspection Facility	74	215 Number

Proceed