Magazine Cover Drg No. D-3054626

Magazine Cover Drg No. D-3054626

D-3054626

Arm to Investment Casting Drg No. D-4082394

Arm to Investment Casting Drg No. D-4082394

D-4082394

Arm to investment casting Drg. no. D-4082416

As per Drg. No. D-4082416

D-4082416

Twin Container Assy (without lable) to DRG No IRCL-494 for sub calibre adaptor 219.9 mm to dc(I) no. 18834-w DT. 20-12-03

AS PER DRAWING

STAINLESS STEEL STRIP TO THICKNESS 0.051 mm TO SPECN. SANDVIK 11 R 51 EXTRA HARD ROLLED. ALT. MATL. IS:6911-1922 GRADE X 04 CR.19 NI 9 COLD ROLLED CONDITION

STAINLESS STEEL STRIP TO THICKNESS 0.051 mm TO SPECN. SANDVIK 11 R 51 EXTRA HARD ROLLED. ALT. MATL. IS:6911-1922 GRADE X 04 CR.19 NI 9 COLD ROLLED CONDITION

• AS PER ATTACHMENT

• AS PER ATTACHMENT

GLASS SLAB BF-108

GLASS SLAB BF-108 SIZE:MULTIPLE OF 50 X MULTIPLE OF 50 MM X 50 MM,MAXIMUM SLAB SIZE = 350 X 300 X 50 MM,RADIATION RESISTANT GLASS, REFRACTIVE INDEX ND = 1.582713,ABBE VALUE VD=46.47,OTHER CHARACTERISTICS AS PER SPECN NO. OLF/OPT-GLASS/ SPEC/03-2.DENSITY=3.28 GM/CC.

LENS-3

LENS-3 TO IRDE DRG NO: 138100000201 Go9 FOR DRIVER THERMAL IMAGER (DTI) OF T-90 TANK

LENS-2

LENS-2 TO IRDE DRG NO: 138100000201 Go8 FOR DRIVER THERMAL IMAGER (DTI) OF T-90 TANK

LENS-1

LENS-1 TO IRDE DRG NO: 138100000201 Go7 FOR DRIVER THERMAL IMAGER (DTI) OF T-90 TANK

ADHESIVE TYPE -B

IND/ENG/PROV/1193/d

• As Per Specification/Drawing

• As Per Specification/Drawing

CANVAS COTTON 407 GM LOD 105 CM

IND/ADE/0087 (a) Except That 1-Weight, gsm – A tolerance of +-10% shall be applicable to 407 gsm after waterproofing. 2-Count of yarn :-Warp :-2 ply of 20s Single yarn Weft :-3 ply of 24s Single yarn (Note: The count of single yarn is approximate and given for the guidance of the manufacturers. The no. of plies, however, shall not be changed.) 3-No. of threads/ inch:- Warp:-92 Weft:-48 (The tolerance in no. of threads/inch shall be +- 5%) 4-Shade OD (Olive Drab), Shade No. 298 as per IS:5

• As per Drawing/Specification

• As per Drawing/Specification

SPECIFICATION NO. : ADRDE/SPECN/82.

SPECIFICATION NO. : ADRDE/SPECN/82.

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

BLANKS FOR BODY CASTING TO GSF DRG. NO. C-1946H DT. 25/04/17

BLANKS FOR BODY TO GSF DRG. NO. C-1946H DT. 25/04/17

C-1946 H

• AS PER ATTACHMENT

• AS PER ATTACHMENT

MACHINED BODY FOR RIFLE 5.56MM ASSAULT RIFLE/EX-CALIBUR, DRG. NO. RF/SK. 9730

BS 970 Pt. 1-1983, 817 M-40 T (BS:970 En24 T)

DRG. NO. RF/SK 970

Cord Nylon Various

Specification No. JSS:4020-9:2013 (Revision No. 3)

i. Sewing Thread Spun Polyester ii. Sewing Thread Cotton

(1). As per Specification No. IND/TC/0296 (b) (2). As per Specification No. IS:9543-1980 (3). As per Specification No. IS:1720-1978

As per the Specification

(1). As per Specification No. CQA(GS)/US/460 and (2.) As per Specification No. IS: 2771

Sizes as per requirement

1. Button made from Polyester 2. Buttons made from Plastic

As per Specification No. IS:1461-1984 (reaffirmed 2003) in various sizes and shapes as per requirement with material - Plastic or Polyester as per requirement specified.

ALLUMINIUM ROD 40MM X 145MM LONG DTD 5124/AA7075 FOR RAW MATERIAL OF BARREL SLEEVE MUZZLE ATTACHMENT OF 12 BORE PUMP ACTION GUN.

MATERIAL:-DTD 5124/AA7075

ALLUMINIUM ROD 90MM X 155MM LONG DTD 5124/AA7075 FOR ROW MATERIAL OF BARREL MUZZLE ATTACHMENT OF 12 BORE PUMP ACTION GUN.

MATERIAL:-DTD 5124/AA7075

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380,& MCT-1641/1.

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380,& MCT-1641/1.

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-138

AS PER SPECIFICATION

AS PER SPECIFICATION

FRP CASE CARRYING TO DRG NO.IRDE-2606(COMPLETE) MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)

FRP CASE CARRYING TO DRG NO.IRDE-2606(COMPLETE) MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)

FRP CASE CARRYING TO DRG NO.IRDE-2606(COMPLETE) MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)

PRESSURE DIE CASTING TO HOLDER SE-2P, DRG. NO. B-30/DC/8212017/83

PRESSURE DIE CASTING TO HOLDER SE-2P, DRG. NO. B-30/DC/8212017/83

DRG. NO. B-30/DC/8212017/83

MBEU/7074 PA -- HARDSHELL CONTAINER FOR JAGUAR PILOT PARA.

DRG. NO. ADRDE/1454-00(b)

DRG. NO. ADRDE/1454-00(b)

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

THREAD SEWING NYLON '66' Bonded BS: 4.5 Kgf. Navy Blue

Spec.No.ADRDE/TDTM/TH/2009/1(c) Dtd:-20.05.21, Shade No. 106 AS PER IS-5-1994 THE THREAD SHOULD BE BONDED THREAD

• As per Specification

• As per Specification

PULLY SMALL Prov.Drg. NO. ADRDE/172(b).

Prov. Drg. NO. ADRDE/172(b).

Prov.Drg. NO. ADRDE/172(b).

QUICK RELEASE LOCK TP WITH BUCKLES

DRG.NO.-ADRDE/PAS/2007/16.

DRG.NO.-ADRDE/PAS/2007/16.

• As per Specification/Drawing

• As per Specification/Drawing

SPECIFICATION NO. : ADRDE/SPECN/1983/12(a). 50 MTR ROLL LENGTH EXCLUDING SAMPLING

SPECIFICATION NO. : ADRDE/SPECN/1983/12(a). 50 MTR ROLL LENGTH EXCLUDING SAMPLING

SPECIFICATION NO.: ADRDE/SPECN/1983/12(a) 50 MTR ROLL LENGTH EXCLUDING SAMPLING

SPECIFICATION NO.: ADRDE/SPECN/1983/12(a) 50 MTR ROLL LENGTH EXCLUDING SAMPLING

CORD NYLON BRAIDED 2452-N / 250 KGS

SPECIFICATION NO. : JSS-4020-8

PLASTIC MOULDING BOX FOR 5.56MM ASSAULT RIFLE & GHAATAK,

MATERIAL:-SEE NOTE

DRG. NO. RFI SK 9941

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D LF 7440200208

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

As per Requirements & Specifications

As per Requirements & Specifications

BEARING 5-1000095K TO SPCN TY 4479-73 FOR HEAD OF T-90

TY 4479-73

BEARING 5-1006 TO SPCN. TU 4479-73 FOR HEAD OF T-90

TU 4479-73

BALL BEARING BALL 2.5-100 TO GOST NO. 3722-81 FOR HEAD T-90

GOST 3722-81

BALL BEARING BALL 3.175-40 TO GOST NO. 3722-81 FOR HEAD OF T-90

GOST 3722-81

BEARING 0-1000094 TO GOST NO. 8338-75 FOR HEAD OF T-90

GOST 8338-75

BEARING 0-1000906, GOST 8338-75 SINGLE ROW BALL BEARING SIZE- 30x47x9MM, OPEN TYPE, CLASS OF ACCURACY - 0,

AS PER GOST 8338-75

SPECIFICATION NO. : ADRDE/SPECN/68. ROLL LENGTH 90 MTR.EXCLUDING SAMPLING.

SPECIFICATION NO. : ADRDE/SPECN/68. ROLL LENGTH 90 MTR.EXCLUDING SAMPLING.

Cloth Cotton Closely Woven 170 Grams Scoured 91.4 Cms, (Variety No. A)

Specn. No. : JSS-8305-05:2020 (Fourth Revision) (a) Sampling Plan & Criteria for conformity as per CQAT&C/QA1/TC-11/12.

• As per Specification/Drawing

• As per Specification/Drawing

JSS:4020-9-1999 (Rev No:1)

JSS:4020-9-1999 (Rev No:1)

BEARING SLEEVE SPECIAL BOTTOM DRG.NO.:CQA(I)-796/5

BEARING SLEEVE SPECIAL BOTTOM DRG.NO.:CQA(I)-796/5

CQA(I)-796/5

housing ep to drg. cwc/229/32/2

housing ep to drg. cwc/229/32/2

cwc/229/32/2

IS: 3751 - 1966 PACKING & MARKING AS PER SCHEDULE NO. CQA (T&C)/PMS/33

IS: 3751 - 1966 PACKING & MARKING AS PER SCHEDULE NO. CQA (T&C)/PMS/33

DUCK NYLON 230 GM STEEL GREY 91.4 CM WIDTH

SPECN.NO.ADRDE/SPECN./1984/23(d)

• As per Specification/Drawing

• As per Specification/Drawing

Specn. no. IS-6488-1975 With Amndt. No. 1 of Jan. 1980

Specn. no. IS-6488-1975 With Amndt. No. 1 of Jan. 1980

POLY PROPYLENE CORRUGATED PACKING BOX TO DRG. NO- CO-453 C

AS PER DRG.

CO 453-C

• AS PER ATTACHMENT

• AS PER ATTACHMENT

PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.

PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.

DS CAT NO.1005-000755 DC (I) NO.24576-SA

• Machining

• 1. Chemical & Mechanical properties as per std. given drawing/specification.
• 2. Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

AS PER DRG.

AS PER DRG.

DS CAT No. Y3/6230-000012

• Optical

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

STEEL RD 45MM DIA IN HR & NORMALISED CONDN.TO SPECN.BS:970PT -3:1991.GD.070M55.TEST PIECE TO BETESTED AS PER SPECN.MATL. SHOULD ALSO SATISFY THE TEST AS PER ANNX."C".A SEPERATE TEST PIECES IS TO BE QUENCHED * TEMPERED TO ACHIEVE HARDNESS40-45 HRC. (REQD.FOR-BARREL LOCKING NUT )

SPECN.BS:970PT -3:1991.GD.070M55.

AS PER DRG.

AS PER DRG.

DS CAT 1005-000441

St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.

St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.

AS PER DRG. SKM-306*4

IS :179- (LATEST)

IS :179- (LATEST)

DEVELOPMENT OF TRAVERSE BEARING REQUIRED FOR NEW PROJECT (AS PER SCOPE OF WORK)

DEVELOPMENT OF TRAVERSE BEARING REQUIRED FOR NEW PROJECT (AS PER SCOPE OF WORK)

AS PER SPECIFICATION

AS PER SPECIFICATION

LOW DENSITY POLYTHENE [L.D.P.E.] NATURAL AS PER JSS 6145-26:2014&MSCQ-1R

LOW DENSITY POLYTHENE [L.D.P.E.] NATURAL AS PER JSS 6145-26:2014&MSCQ-1R

• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT

• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT

BRACKET REAR SIGHT FOR 30-06 SPORTING RIFLE, DRG. NO. TSP-302

BS:970 PT.1 GR 070 M55 OR En-9

DRG. NO. TSP-302

BRACKET REAR SIGHT FOR 0.22" SPORTING RIFLE, DRG. NO. SPR-024*2

STEEL BS 970 En19A

DRG. NO. SPR-024*2

TAPE NYLON 66,43 MM.B.S. 9000 N U/D

ADRDE/SPECN/1985/27(b)

• As Per Specification/Drawing

• As Per Specification/Drawing

TAPE NYLON 66, 26mm TUBULAR BS 1850 KG ADRDE/SPECN/2000/54(c)

ADRDE/SPECN/2000/54(c)

SPRING MAIN FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003186

BS: 970 Pt.3 : 1991 Gr. 817 IN 'C D; LTA, CONDOTION TEST OIECE TO BE TESTED IN CONDITION 'W' OF BS:970 PART 3:1991

DRG. NO. DS CAT NO-1005-003186

STOCK SIDE RIGHT FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003177

MOULDING POWDER, MOULDING PLASTICS (PHENOLIC) TO SPECN. NO. JSS 1097 GRD. 'Z' WITH A MINIMUM IMPECT STRENGTH OF 0.81 JOULE AND MINIMUM TENSILE STRENGTH OF 41.37 MPa, OR NYLON 66 GP COLOUR BLACK TO SPECN DEF/STAN 93-8/1 WITHOUT GLASS FIBRE FINISH OF END PRODUCT OF STOCK SIDE RIGHT SHALL BE COLOUR BLACK (MATT. FINISH)

DRG. NO. DS CAT NO-1005-003177

STOCK SIDE LEFT FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003176

MOULDING POWDER, MOULDINGPLASTICS (PHENOLIC) TO SPECCN NO. JSS 1097 GRD. "Z" WITH A MINIMUM IMPECT STRENGTH OF 0.81 JOULE AND MINIMUM TENSILE STRENGTH OF 41.37 MPa/ or nylon 66 gp colour black to specn deef/ stan 93-8/1 without glass fibre. finish of end product of stock side left shall be colour black (matt. finish)

DRG. NO. DS CAT NO-1005-003176

MAGAZINE ASSY. FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003190, 1005-003191, 1005-003192

AS PER DRAWING

DRG. NO. DS CAT NO-1005-003190, 1005-003191, 1005-003192

GUIDE SPRING MAIN ASSY FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-5360-007390

CROMIUM ALLOY STEEL BALL TO SPECN. IS:2898-1976 H.T./HARDNESS

DRG. NO. DS CAT NO-5360-007390

SLING SUB ASSY. FOR 12 BORE PUMP ACTION GUN, DRG. NO. DS CAT NO-1005-007815, 1005-007994, 1005-007995

AS PER DRAWING

DRG. NO. DS CAT NO-1005-007815, 1005-007994, 1005-007995

SEAR FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003172

IS:3748 : 1990 DESIGNATION 75 T-6

DRG. NO. DS CAT NO-1005-003172

CATCH MAGAZINE FINISH FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003148

BS:970 M40 IS:3748-1990 DESIGNATION 75. T-6

DRG. NO. DS CAT NO-1005-003148

PLATE LOCKING FOR PISTOL AUTO 9MM 1A, DRG. NO. DS CAT NO-1005-003205

BS:970 PAET 3:1991 GRADE 708 M40 CONDITION 'R' IS:5517-1993 DESIGNATION 42 Cr Mo 2

DRG. NO. DS CAT NO-1005-003205

LOOP LANYARD ASSY. FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003166, 1005-003167, 1005-003168

STEEL BS:5216-75 CODE NS OR HS Gr 1 OR 2 OR BS5216-75 CODE ND OR HD Gr 2 or IS:4454 PT.I-1975 Gr 1 & 2

DRG. NO. DS CAT NO-1005-003166, 1005-003167, 1005-003168

ARM SEAR CONNECTINGT FOR 9MM AUTO PISTOL 1A, DRG. NO.- DS CAT NO 1005-003196

IS:2507 : 1975 GRADE 6, DESIG. 80 C6

DRG. NO.- DS CAT NO 1005-003196

SLIDE FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003210

IS:5517-1993 DESIGNATION 42 Cr 4 Mo 2 LRS190mm

DRG. NO. DS CAT NO-1005-003210

LOWER BLOCK BARREL FOR TEAR GAS GUN, DRG. NO. TGG-103

BS:970 : PART 1 : 1983 070 M55 (EN-9) ALTERNATE MATL. BS:970 : PART 1:1983 708 M40 (EN-19A)

DRG. NO. TGG-103

UPPER BLOCK BARREL FOR TEAR GAS GUN, DRG. NO. TGG-102

BS:970 : PART 1 : 1983 070 M55 (EN-9) ALTERNATE MAT : BS:970 : PART 1 : 1983 708 M40 (EN-19A)

DRG. NO. TGG-102

BOLT BREECH FOR 0.22" SPORTING RIFLE. DRG. NO. SPR-013

BS. 970 EN 19A (T)

DRG. NO. SPR-013

BODY FOR 0.22" SPRTING RIFLE, DRG. NO. SPR-012*4

BS 970 EN 19A (T-CONDITION) WITH NON METALLIC INCLUSION RATING TEST

DRG. NO. SPR-012*4

BLOCK EJECTOR FOR 0.22" SPORTING RIFLE, DRG. NO. SPR-032*2

BS:970 EN 19A (T) PHOSPHETED TO SPECN JSS:0465-01 CLASS II OIL FINISH

DRG. NO. SPR-032*2