DoO(C&S) Vendor Panel | Page ,b4f45d1a03c2fdf911110a20d2ab1061f6a1b7f1

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofbqcvrcell[dot]ofb[at]ofb[dot]gov[dot]in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

22301

OLF/MM-2/T-1706011625

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity
BUSHING FOR GYRO STABILIZER TO DRG NO AL8.220.807 (LF 7440202656) Description BUSHING FOR GYRO STABILIZER TO DRG NO AL8.220.807 (LF 7440202656) Specification BUSHING FOR GYRO STABILIZER TO DRG NO AL8.220.807 (LF 7440202656) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	86 Number
RING FOR GYRO STABILIZER TO DRG NO AL8.680.586 (LF 7440202655) Description RING FOR GYRO STABILIZER TO DRG NO AL8.680.586 (LF 7440202655) Specification RING FOR GYRO STABILIZER TO DRG NO AL8.680.586 (LF 7440202655) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	86 Number
WASHER AS PER DRG NO AL8942747 (LF 7440201938) Description WASHER AS PER DRG NO AL8942747 (LF 7440201938) Specification WASHER AS PER DRG NO AL8942747 (LF 7440201938) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	317 Number
STRIP TO DRG NO BSH8600745 (LF 7432511060) Description STRIP TO DRG NO BSH8600745 (LF 7432511060) Specification STRIP TO DRG NO BSH8600745 (LF 7432511060) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	389 Number

22302

110170307

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
FABRIC NY. 58 G UD 100 CM WIDTH Description FABRIC NY. 58 G UD 100 CM WIDTH Specification AS PER TECH.PARTICULARS (a) MASS/SQ MET : 58 GM (MAX) (b) BREAKING STRENGTH, BOTH WAYS : 60 KGF (MIN) (c) TEARING STRENGTH, BOTH WAYS : 1.7 KGF (MIN) (d) AIR POROSITY : 7-10 CU.FT/SQ.FT/SEC. (e) THICKNESS:0.11MM,MAX AT A PRESSUE OF 200GM/SQCM. (f) WIDTH : 100 CM (g) YARN LENIER DENSITY, BOTHWAYS : 45 DENIER(NORMAL) (h) TWIST OF YARN :WARP:200 TPM, WEFT: 150TPM (i) THREAD DENSITY, BOTHWAYS :48-50/CM.(j) WEAVE:2/1 TWILL NOTE: THERE SHOULD NOT BE ANY TYPE OF YARN DISTORTION/SLIPPAG Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221262	3944 Metre

22303

110170306

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
FABRIC NYLON 1.5 Oz (52GM) U/D RIP STOP 92 CMS. Description FABRIC NYLON 1.5 Oz (52GM) U/D RIP STOP 92 CMS. Specification SPECIFICATION NO.: ADRDE/SPECN/1988/32. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101212092	554 Metre

22304

110170305

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
COIL SPRING (FOR TAIL UNIT) Description SPECN NO.ADRDE/1159-A-1/SA-8-5 Specification SPECN NO.ADRDE/1159-A-1/SA-8-5 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101069002	197 Number

22305

OFD_O175-16/1

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity
COVER TO DRG NO. MCT-1391/1 Description COVER TO DRG NO. MCT-1391/1 Specification COVER TO DRG NO. MCT-1391/1 Drawing no. COVER TO DRG NO. MCT-1391/1 MCT-1391-1.jpg Manufacturing Technology Testing / Inspection Facility	74	1197 Number
GASKET TO DRG.NO.:AU8.683.234-05 Description GASKET TO DRG.NO.:AU8.683.234-05 Specification GASKET TO DRG.NO.:AU8.683.234-05 Drawing no. GASKET TO DRG.NO.:AU8.683.234-05 Manufacturing Technology Testing / Inspection Facility	74	6740 Number
GASKET FOR TNP-165A DRG.NO.:AU8.683.234-04 Description GASKET FOR TNP-165A DRG.NO.:AU8.683.234-04 Specification GASKET FOR TNP-165A DRG.NO.:AU8.683.234-04 Drawing no. GASKET FOR TNP-165A DRG.NO.:AU8.683.234-04 Manufacturing Technology Testing / Inspection Facility	74	6740 Number
GASKET FOR TNP-165A DRG.NO.:AU8.683.234-03 Description GASKET FOR TNP-165A DRG.NO.:AU8.683.234-03 Specification GASKET FOR TNP-165A DRG.NO.:AU8.683.234-03 Drawing no. GASKET FOR TNP-165A DRG.NO.:AU8.683.234-03 Manufacturing Technology Testing / Inspection Facility	74	10108 Number
GASKET TO DRG.NO.:AU8.683.234-02 Description GASKET TO DRG.NO.:AU8.683.234-02 Specification GASKET TO DRG.NO.:AU8.683.234-02 Drawing no. GASKET TO DRG.NO.:AU8.683.234-02 Manufacturing Technology Testing / Inspection Facility	74	6740 Number
GASKET TO DRG.NO.:AU8.683.234-01 Description GASKET TO DRG.NO.:AU8.683.234-01 Specification GASKET TO DRG.NO.:AU8.683.234-01 Drawing no. GASKET TO DRG.NO.:AU8.683.234-01 ATS8_683_234-GASKET.jpg Manufacturing Technology Testing / Inspection Facility	74	6740 Number

22306

110170299

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
TAPE NYLON 28 MM U/D 7500N BS,SPECNS.NO.-AS UNDER PARTCULARS Description 1-LENGTH PER ROLL(MIN) --100M ---IS:1954 2-WIDTH IN MM 28 + - 0.5 ---IS:1954 3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702 4-MASS,gm,MAX --17gm ---IS:4727 5-BREAKING LOAD "N" MIN. --7500 ---IS:1969 6-TOTAL NO.OF ENDS(FULL WIDTH) --135 ----IS:1963 7-PICKS/CM --14 -----IS:1963 8-LINEAR DENSITY OF YARN,TEX WARP ---93.3 WEFT ---23.3 X 2 9-WEAVE PLAIN ----VISUAL (2 PICKS/SHED) Specification 1-LENGTH PER ROLL(MIN) --100M ---IS:1954 2-WIDTH IN MM 28 + - 0.5 ---IS:1954 3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702 4-MASS,gm,MAX --17gm ---IS:4727 5-BREAKING LOAD "N" MIN. --7500 ---IS:1969 6-TOTAL NO.OF ENDS(FULL WIDTH) --135 ----IS:1963 7-PICKS/CM --14 -----IS:1963 8-LINEAR DENSITY OF YARN,TEX WARP ---93.3 WEFT ---23.3 X 2 9-WEAVE PLAIN ----VISUAL (2 PICKS/SHED) Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786939	11414 Metre

22307

110170298

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
STIFFNER PLATE Description SPECN-ADRDE/1423 Specification SPECN-ADRDE/1423 Drawing no. Manufacturing Technology Testing / Inspection Facility	2110036054	33 Number

22308

110170297

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
TAPE TUBULAR NYLON 27 MM U/D BS 2000 KG. Description SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1 2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25 3.MASS/METERS,(gm) MAX 47 4-ENDS IN FULL WIDTH SUGGESTED 130 5.PICKS/CM SUGGESTED 12(INCLUDING BOTH LAYERS) 6.DENIER OF WARP/WEFT NOMINAL 840X3 /210X5 7.BREAKING STRENGTH kgf,min.N) 2000 8.TPM IN WARP/WEFT 100-200/100-200 Specification SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1 2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25 3.MASS/METERS,(gm) MAX 47 4-ENDS IN FULL WIDTH SUGGESTED 130 5.PICKS/CM SUGGESTED 12(INCLUDING BOTH LAYERS) 6.DENIER OF WARP/WEFT NOMINAL 840X3 /210X5 7.BREAKING STRENGTH kgf,min.N) 2000 8.TPM IN WARP/WEFT 100-200/100-200 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786935	550 Metre

22309

OLF/MM-2/T-1706011678

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
BODY FOR BPV29000 TO DRG NO 29.099 (LF 7440201414) Description BODY FOR BPV29000 TO DRG NO 29.099 (LF 7440201414) Specification BODY FOR BPV29000 TO DRG NO 29.099 (LF 7440201414) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	211 Number

22310

EOI/05/Polypropylene

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
Polypropelene Strapping 12mm Description Polypropelene Strapping 12mm Specification IND/GS/1683 (a) colour white Drawing no. Manufacturing Technology Testing / Inspection Facility	21	1 Metre

22311

EOI/04/ Polythene twin braided 3 mm

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity
LACES FABRIC VARIOUS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	1 Pair
LACES NYLON VARIOUS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	1 Pair
CORD ELASTIC VARIOUS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	1 Set
CORD NYLON BRAIDED VARIOUS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	1 Metre
Cord Cotton Braided various Description As per requirement & specification Specification As per requirement & specification Drawing no. Manufacturing Technology Testing / Inspection Facility	21	1 Metre
POLYTHENE TWINE BRAIDED VARIOUS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	1 Kilogram

22312

EOI/03/Polythene Bag

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity
Polythene Film of different thickness & dimension Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	1 Number
POLYTHENE BAG OF SELF SEALING TAPE OF DIFFERENT DIMENSIONS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	1 Number
POLYTHENE BAG OF DIFFERENT THICKNESS & DIMENSIONS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	1 Number

22313

EOI/02/NC Head Dress

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
NETS CAMOUFLAGE HEAD DRESS OG MK-2 Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	1 Number

22314

2016000362

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Latex Foam Rubber Solid Type 25 mm Thick X point six m X one point two zero M Hard Grade Description Latex Foam Rubber Solid Type 25 mm Thick X 0.6 m X 1.20 M Hard Grade Specification IS:1741-1960 AMD-5 Reaffirmed 2008 Drawing no. Manufacturing Technology As per the attached file CV_Norms_latex_foam.pdf Testing / Inspection Facility As per the attached file CV_Norms_latex_foam.pdf	21	4293 Number

22315

110170177 (VRR)

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
TEAR TAPE NYLON 44 MM 10000 N TEARING STRENGTH 340 640 N Description TEAR TAPE NYLON 44 MM,10000 N(TEARING STRENGTH=340-640 N) Specification ADRDE/SPECN/1980/4(b) Drawing no. ADRDE/SPECN/1980/4(b) Manufacturing Technology As Per Specification/Drawing ADRDE_SPECN_1980_4b.pdf Testing / Inspection Facility As Per Specification/Drawing ADRDE_SPECN_1980_4b.pdf	2101797671	2766 Metre

22316

B20152549

Ordnance Factory Kanpur

The Sr.General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Forged body for shell 105mm IFG HE 01 Description As per OFC Drg. NO. SK-9367/A Specification As per OFC Drg. NO. SK-9367/A Drawing no. SK-9367/A Manufacturing Technology Testing / Inspection Facility	65	20000 Number

22317

20170342/PV/1561(A)/EOT/F

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
Fastener Hook/Loop Tape For Assy. Canvas Canopy (Tarpaulin) Stallion one Set consist of Description IS:8156 (Latest) Specification IS:8156 (Latest) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	5874 Set

22318

OLF/MM-2/T-1706011466

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity
TITANIUM ALLOY ROD DIA -45 AS PER IS:11902-86 GR-G (LF : 9927094845) Description TITANIUM ALLOY ROD DIA -45 AS PER IS:11902-86 GR-G (LF : 9927094845) Specification TITANIUM ALLOY ROD DIA -45 AS PER IS:11902-86 GR-G (LF : 9927094845) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	195 Kilogram
STEEL SHEET TOOL ALLOY 16.0 MM THICK TO SPCN IS: 3749 T-110 W6CR4 (LF : 9927094680) Description STEEL SHEET TOOL ALLOY 16.0 MM THICK TO SPCN IS: 3749 T-110 W6CR4 (LF : 9927094680) Specification STEEL SHEET TOOL ALLOY 16.0 MM THICK TO SPCN IS: 3749 T-110 W6CR4 (LF : 9927094680) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	95 Kilogram
STEEL TUBE TO SPCN IS:3601:84 GR CDS-240, OUTER DIA 70 MM X WALL THICKNESS 10 MM (LF : 9927093904) Description STEEL TUBE TO SPCN IS:3601:84 GR CDS-240, OUTER DIA 70 MM X WALL THICKNESS 10 MM (LF : 9927093904) Specification STEEL TUBE TO SPCN IS:3601:84 GR CDS-240, OUTER DIA 70 MM X WALL THICKNESS 10 MM (LF : 9927093904) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	410 Kilogram
STL TUBE OUTER DIA 40 MM X 9 MM WALL THICKNESS IS : 3601-84 GRCDS-240 COND NORMALISED IN RUNNING LENGTH OF 2 TO 3 MTRS. (LF : 9927093899) Description STL TUBE OUTER DIA 40 MM X 9 MM WALL THICKNESS IS : 3601-84 GRCDS-240 COND "NORMALISED" IN RUNNING LENGTH OF 2 TO 3 MTRS. (LF : 9927093899) Specification STL TUBE OUTER DIA 40 MM X 9 MM WALL THICKNESS IS : 3601-84 GRCDS-240 COND "NORMALISED" IN RUNNING LENGTH OF 2 TO 3 MTRS. (LF : 9927093899) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	230 Kilogram
TITANIUM UNALLOY ROD, 55MM DIA OST-1-90013-80 GRADE VTI OR IS:11902, GRADE B IN RUNNING LENGTH OF 2 MTRS (LF : 9927087413) Description TITANIUM UNALLOY ROD, 55MM DIA OST-1-90013-80 GRADE VTI OR IS:11902, GRADE "B" IN RUNNING LENGTH OF 2 MTRS (LF : 9927087413) Specification TITANIUM UNALLOY ROD, 55MM DIA OST-1-90013-80 GRADE VTI OR IS:11902, GRADE "B" IN RUNNING LENGTH OF 2 MTRS (LF : 9927087413) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	260 Kilogram
STEEL STAINLESS WIRE 1.6MM AS PER SPCN IS:6603-01 GR. X 04CR18NI10TI IN THE STANDARD RUNNING LENGTH (LF : 9927085605) Description STEEL STAINLESS WIRE 1.6MM AS PER SPCN IS:6603-01 GR. X 04CR18NI10TI IN THE STANDARD RUNNING LENGTH (LF : 9927085605) Specification STEEL STAINLESS WIRE 1.6MM AS PER SPCN IS:6603-01 GR. X 04CR18NI10TI IN THE STANDARD RUNNING LENGTH (LF : 9927085605) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	10 Kilogram
BRASS ROUND BAR 80MM DIA +/- 0.2, TO SPCN. IS:319, TYPE-I, 1/2H IN RUNNING LENGTH OF 1.5 TO 3.0 MTRS. (LF:9927076939) Description BRASS ROUND BAR 80MM DIA +/- 0.2, TO SPCN. IS:319, TYPE-I, 1/2H IN RUNNING LENGTH OF 1.5 TO 3.0 MTRS. (LF:9927076939) Specification BRASS ROUND BAR 80MM DIA +/- 0.2, TO SPCN. IS:319, TYPE-I, 1/2H IN RUNNING LENGTH OF 1.5 TO 3.0 MTRS. (LF:9927076939) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	665 Kilogram
BRASS ROUND BAR 105 MM DIA TO SPCN. IS:319 TYPE-I 1/2 (HARD) IN RUNNING LENGTH OF 1 TO 1.5 MTRS (LF : 9927074231) Description BRASS ROUND BAR 105 MM DIA TO SPCN. IS:319 TYPE-I 1/2 (HARD) IN RUNNING LENGTH OF 1 TO 1.5 MTRS (LF : 9927074231) Specification BRASS ROUND BAR 105 MM DIA TO SPCN. IS:319 TYPE-I 1/2 (HARD) IN RUNNING LENGTH OF 1 TO 1.5 MTRS (LF : 9927074231) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	1695 Kilogram
SILICON BRONZE GR. CS-101, SIZE 0.5T X 200 X 1000 MM BS 2870:80 (LF: 9927074196) Description SILICON BRONZE GR. CS-101, SIZE 0.5T X 200 X 1000 MM BS 2870:80 (LF: 9927074196) Specification SILICON BRONZE GR. CS-101, SIZE 0.5T X 200 X 1000 MM BS 2870:80 (LF: 9927074196) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	13 Kilogram
STAINLESS STEEL SHEET 1.4 MM THICK X 700 MM WIDTH TO SPCN IS:6911 : 1992 GR. X 04CR19NI9 IN THE STANDARD RUNNING LENGTH (LF: 9927073672) Description STAINLESS STEEL SHEET 1.4 MM THICK X 700 MM WIDTH TO SPCN IS:6911 : 1992 GR. X 04CR19NI9 IN THE STANDARD RUNNING LENGTH (LF: 9927073672) Specification STAINLESS STEEL SHEET 1.4 MM THICK X 700 MM WIDTH TO SPCN IS:6911 : 1992 GR. X 04CR19NI9 IN THE STANDARD RUNNING LENGTH (LF: 9927073672) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	10 Kilogram
STEEL LOW CARBON FREE CUTTING ROUND STEEL BRIGHT BAR 10.0 MM TO SPCN IS:7283-92 GR. 10C8S10 OF IS:4431-78 (LF:9927073604) Description STEEL LOW CARBON FREE CUTTING ROUND STEEL BRIGHT BAR 10.0 MM TO SPCN IS:7283-92 GR. 10C8S10 OF IS:4431-78 (LF:9927073604) Specification STEEL LOW CARBON FREE CUTTING ROUND STEEL BRIGHT BAR 10.0 MM TO SPCN IS:7283-92 GR. 10C8S10 OF IS:4431-78 (LF:9927073604) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	230 Kilogram
STEEL BRIGHT BAR DIA 3.0 MM TO SPCN IS:7283-92, GR10C8S10 OF IS:4431-78 (LF: 99227073600) Description STEEL BRIGHT BAR DIA 3.0 MM TO SPCN IS:7283-92, GR10C8S10 OF IS:4431-78 (LF: 99227073600) Specification STEEL BRIGHT BAR DIA 3.0 MM TO SPCN IS:7283-92, GR10C8S10 OF IS:4431-78 (LF: 99227073600) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	155 Kilogram
SPRING STEEL SHEET SIZE 0.50MM THICK TO SPCN IS:2507, 80C6 IN RUNNING LENGTH 1 TO 2 MTR. X 0.500 WIDE (LF: 9927073538) Description SPRING STEEL SHEET SIZE 0.50MM THICK TO SPCN IS:2507, 80C6 IN RUNNING LENGTH 1 TO 2 MTR. X 0.500 WIDE Specification SPRING STEEL SHEET SIZE 0.50MM THICK TO SPCN IS:2507, 80C6 IN RUNNING LENGTH 1 TO 2 MTR. X 0.500 WIDE Drawing no. Manufacturing Technology Testing / Inspection Facility	99	65 Kilogram
AL. ALLOY SHEET SIZE 0.8MM THICK TO SPCN IS:737, GR. 24345, INWP CONDITION X 500 MM W X 2500 MM LONG (LF:9927073485) Description AL. ALLOY SHEET SIZE 0.8MM THICK TO SPCN IS:737, GR. 24345, INWP CONDITION X 500 MM W X 2500 MM LONG (LF:9927073485) Specification AL. ALLOY SHEET SIZE 0.8MM THICK TO SPCN IS:737, GR. 24345, INWP CONDITION X 500 MM W X 2500 MM LONG (LF:9927073485) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	175 Kilogram
TOOL STL. SHT. AS PER IS:3748:90, GR. 80T3, 12MM TH. X 500MM WIDE X 2 MTRS. AND ABOVE (LF:0202002012) Description TOOL STL. SHT. AS PER IS:3748:90, GR. 80T3, 12MM TH. X 500MM WIDE X 2 MTRS. AND ABOVE (LF:0202002012) Specification TOOL STL. SHT. AS PER IS:3748:90, GR. 80T3, 12MM TH. X 500MM WIDE X 2 MTRS. AND ABOVE (LF:0202002012) Drawing no. Manufacturing Technology Testing / Inspection Facility	02	215 Kilogram
MEDIUM CARBON STEEL SHEET 25MM THICK X 250MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8, (LF:0143022026) Description MEDIUM CARBON STEEL SHEET 25MM THICK X 250MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8, (LF:0143022026) Specification MEDIUM CARBON STEEL SHEET 25MM THICK X 250MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8, (LF:0143022026) Drawing no. Manufacturing Technology Testing / Inspection Facility	01	305 Kilogram
MEDIUM CARBON STEEL SHEET SIZE 20MM THICK X 300 MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8 (LF:0143022020) Description MEDIUM CARBON STEEL SHEET SIZE 20MM THICK X 300 MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8 (LF:0143022020) Specification MEDIUM CARBON STEEL SHEET SIZE 20MM THICK X 300 MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8 (LF:0143022020) Drawing no. Manufacturing Technology Testing / Inspection Facility	01	670 Kilogram
STEEL SHT. GR. 'DD' IS513:94 SIZE 1MM THICK X 300 X 1000 MM (LF: 0133023010) Description STEEL SHT. GR. 'DD' IS513:94 SIZE 1MM THICK X 300 X 1000 MM (LF: 0133023010) Specification STEEL SHT. GR. 'DD' IS513:94 SIZE 1MM THICK X 300 X 1000 MM (LF: 0133023010) Drawing no. Manufacturing Technology Testing / Inspection Facility	01	35 Kilogram
STEEL ROD DIA 15MM GR. 14C14S14 TO IS 4431:78 (LF-0131002016) Description STEEL ROD DIA 15MM GR. 14C14S14 TO IS 4431:78 (LF-0131002016) Specification STEEL ROD DIA 15MM GR. 14C14S14 TO IS 4431:78 (LF-0131002016) Drawing no. Manufacturing Technology Testing / Inspection Facility	01	125 Kilogram

22319

RFI/OTE/ATH0820181/2017

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
HAMMER FOR 12 BORE PAG, DRG.NO. PAG-0060A THROUGH MIM ROUTE Description HAMMER FOR 12 BORE PAG, DRG.NO. PAG-0060A THROUGH MIM ROUTE Specification HAMMER FOR 12 BORE PAG, DRG.NO. PAG-0060A THROUGH MIM ROUTE Drawing no. DRG.NO. PAG-0060A HAMMER_MIM.pdf Manufacturing Technology Testing / Inspection Facility	70	7500 Number

22320

RFI/OTE/ATH0820179/2017

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
TRIGGER FOR 12 BORE PAG, DRG.NO. PAG-0033 THROUGH MIM ROUTE Description TRIGGER FOR 12 BORE PAG, DRG.NO. PAG-0033 THROUGH MIM ROUTE Specification TRIGGER FOR 12 BORE PAG, DRG.NO. PAG-0033 THROUGH MIM ROUTE Drawing no. DRG.NO. PAG-0033 TRIGGER_MIM.pdf Manufacturing Technology Testing / Inspection Facility	70	7500 Number

22321

RFI/OTE/ATH0820180/2017

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
BREECH SLIDE LOCKFOR 12 BORE PAG, DRG. NO. PAG-0027 THROUGH MIM ROUTE Description BREECH SLIDE LOCKFOR 12 BORE PAG, DRG. NO. PAG-0027 THROUGH MIM ROUTE Specification BREECH SLIDE LOCKFOR 12 BORE PAG, DRG. NO. PAG-0027 THROUGH MIM ROUTE Drawing no. DRG. NO. PAG-0027 BREECH_SLIDE_LOCK_MIM.pdf Manufacturing Technology Testing / Inspection Facility	70	7500 Number

22322

RFI/OTE/ATH0820183/2017

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
BREECH BLOCK SLIDE FOR 12 BORE PAG, DRG.NO. PAG-0065B THROUGH MIM ROUTE Description BREECH BLOCK SLIDE FOR 12 BORE PAG, DRG.NO. PAG-0065B THROUGH MIM ROUTE Specification BREECH BLOCK SLIDE FOR 12 BORE PAG, DRG.NO. PAG-0065B THROUGH MIM ROUTE Drawing no. DRG.NO. PAG-0065B BREECH_BLOCK_SLIDE_MIM.pdf Manufacturing Technology Testing / Inspection Facility	70	7500 Number

22323

RFI/OTE/ATH0820184/2017

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
MAGAZINE CAP FOR 12 BORE PAG, DRG.NO. PAG-0018 THROUGH MIM ROUTE Description MAGAZINE CAP FOR 12 BORE PAG, DRG.NO. PAG-0018 THROUGH MIM ROUTE Specification MAGAZINE CAP FOR 12 BORE PAG, DRG.NO. PAG-0018 THROUGH MIM ROUTE Drawing no. DRG.NO. PAG-0018 MAGAZINE_CAP_MIM.pdf Manufacturing Technology Testing / Inspection Facility	70	7500 Number

22324

RFI/OTE/ATH0820182/2017

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
TRIGGERING PIN CATCH FOR 12 BORE PAG, DRG.NO. PAG-0038 THROUGH MIM ROUTE Description TRIGGERING PIN CATCH FOR 12 BORE PAG, DRG.NO. PAG-0038 THROUGH MIM ROUTE Specification TRIGGERING PIN CATCH FOR 12 BORE PAG, DRG.NO. PAG-0038 THROUGH MIM ROUTE Drawing no. DRG.NO. PAG-0038 TRIGGERING_PIN_CATCH_MIM.pdf Manufacturing Technology Testing / Inspection Facility	70	7500 Number

22325

RFI/OTE/ATH0120177/2017

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity
STEEL ROD 15 MM DIA Description STEEL ROD 15MM DIA HR, ANNEALED COND. TO SPECN. BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED. IN STRAIGST LENGTH. FOR PIN FIRING OF TGG. Specification SPECN. BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED. Drawing no. Manufacturing Technology Testing / Inspection Facility	03	2000 KG Kilogram
STEEL ROD 8 MM DIA Description STEEL ROD 8MM DIA, HR, ANNEALED COND. TO SPECN. BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED.IN STRAIGHT LENGTH, FOR PIN FIRING OF PAG & 0.32" PISTOL. Specification BS:970, PT1 1983 GD. 835 M-30 (EN-30B) Drawing no. Manufacturing Technology Testing / Inspection Facility	03	2000 KG Kilogram
STEEL ROD 6 MM DIA. Description STEEL ROD 6 MM DIA CD., 2M OR 2.5M STRAIGHT IN LENGTH TO BS: 970, PT-I,1983 GD.835, M-30(EN-30B). VACCUM DEGASSED. FOR PIN FIRING OF 7.62 MM RIFLE GHATAK. Specification BS: 970, PT-I,1983 GD.835, M-30(EN-30B). VACCUM DEGASSED. Drawing no. Manufacturing Technology Testing / Inspection Facility	03	2000 KG Kilogram
STEEL ROD 4 MM DIA Description STEEL ROUND 4 -0.1MM DIA. HR, ANNEALED COND. TO SPCN.BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED, IN STRAIGHT LENGTH 2 TO 3 M LONG. Specification SPCN.BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED, Drawing no. Manufacturing Technology Testing / Inspection Facility	03	2000 KG Kilogram

22326

110170284

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
INHERENT FR POLYESTER FABRIC FC TREATED DISRUPTIVE PRINTED 125GSM WIDTH 100CM Description PROV. SPECN.NO. DMSRDE/T&GS/2005/NBC/02(a) Specification PROV. SPECN.NO. DMSRDE/T&GS/2005/NBC/02(a) Drawing no. Manufacturing Technology Testing / Inspection Facility	2101921194	7799 Metre

22327

107MMETT17002144

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
Impact Protector Left to Drg No F1303 026871 for 84mm RL Mk III Description Impact Protector Left to Drg No F1303-026871 for 84mm RL Mk-III Specification AS PER DRAWING Drawing no. 304052820_Impact_Protection_Left.pdf Manufacturing Technology AS PER ATTACHMENT 22-23_PM.pdf Testing / Inspection Facility AS PER ATTACHMENT 22-23_PM.pdf	71	1115 Number

22328

116MMETT17002943

Ordnance Factory Kanpur

The Sr.General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Arm to Casting Description Arm to Casting Drg. No. D-4082388 Specification As per Drg. No. D-4082388 Drawing no. D-4082388 New_Doc_2017-12-12_(1).pdf Manufacturing Technology Testing / Inspection Facility	25	64 Number

22329

116MMETT17002937

Ordnance Factory Kanpur

The Sr.General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Holder to Investment Casting Description Holder to investment casting to Drg . No. D-4082393/1 Specification As per Drg . No. D-4082393/1 Drawing no. D-4082393/1 New_Doc_2017-12-12_(1).pdf Manufacturing Technology Testing / Inspection Facility	25	70 Number

22330

110170196 (re)

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
DUCK NYLON 230 GM STEEL GREY 91point4 CM WIDTH Description DUCK NYLON 230 GM STEEL GREY 91.4 CM WIDTH Specification SPECN.NO.ADRDE/SPECN./1984/23(d) Drawing no. Manufacturing Technology As per Specification/Drawing ADRDE_SPECN_1984_23_d.pdf Testing / Inspection Facility As per Specification/Drawing ADRDE_SPECN_1984_23_d.pdf	2101142715	828 Metre

22331

110170165 (re)

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
THREAD SEWING NYLON LIGHT OG VARIETY NO. L- 2. 3 STAND OG (BL-35N(MIN)) Description THREAD SEWING NYLON LIGHT OG VARIETY NO. L- 2. 3 STAND OG (BL-35N(MIN)) SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2). Specification SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2). Drawing no. Manufacturing Technology Testing / Inspection Facility	2101686864	8132 Kilometer(km)

22332

110170276

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
NYLON FILAMENT ROPE OG 16MM DIA. IN MULTIPLE ROLL LENGTH OF 32.00 METRE Description IND/ENG/PROV/0732(a) Specification IND/ENG/PROV/0732(a) Drawing no. Manufacturing Technology Testing / Inspection Facility	2101681816	4263 Metre

22333

110170273

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
POLYCHLOROPRENE PROOFED NYLON FAB.STRIP TYPE A 20MM WIDE KK7 Description IND/ENG/PROV/1221/a Specification IND/ENG/PROV/1221/a Drawing no. Manufacturing Technology Testing / Inspection Facility	2103725560	14400 Metre

22334

ORDFYS/OFT/DAVP/17-18/MMR/E-PROC/7.62/OTE/04

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
SUPPLY OF BLOCK EJECTOR ICR 1324 TO DS CAT N0 1005 001513 DC NO 26758 SA DATED 28 05 15 FULLY FINISHED CONDITION WITH FIRM MATERIAL LATEST ISSUE TO BE FOLLOWED Description SUPPLY OF BLOCK EJECTOR ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED. Specification AS PER ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED. Drawing no. ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 37__block_ejector.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE TESTING.pdf	70	3258 Number

22335

ORDFYS/OFT/DAVP/17-18/MMR/E-PROC/OTE/TAR/03

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR Description PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR Specification PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR SPEC_PLASTIC_MAGAZINE_ASSY.pdf Drawing no. K 7040 STAR Drg.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE TESTING.pdf	70	4017 Number
SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 WITH FIRM'S MATERIAL Description SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 WITH FIRM'S MATERIAL Specification AS PER DRG NO K 4110 WITH FIRM'S MATERIAL Drawing no. K 4110 SIDE_FOLDABLE_BUTT.pdf Manufacturing Technology Testing / Inspection Facility	70	1188 Number

22336

OLF/MM-2/T-1706011524

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
CONTROL BOCK TO DRG NO AL5139107 FOR BLOCK D (LF 7440200315) Description CONTROL BOCK TO DRG NO AL5139107 FOR BLOCK D (LF 7440200315) Specification CONTROL BOCK TO DRG NO AL5139107 FOR BLOCK D (LF 7440200315) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	237 Number

22337

107MMETT17002137

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
MASK AK 630 ASSY 103 Description MASK AK-630 ASSY. 103 Specification MASK AK-630 ASSY. 103 Drawing no. 103_MANTLET-ALBUM.pdf Manufacturing Technology AS PER ATTACHMENT PM5.pdf Testing / Inspection Facility AS PER ATTACHMENT PM5.pdf	72	06 Number

22338

PV/1925/OCFC/SS WIRE/01

Ordnance Cable Factory Chandigarh

The General Manager,
Chandigarh
Chandigarh
Chandigarh
160002

Name	Code	Quantity	Approx Value	Select
STAINLESS STEEL WIRE 0.381MM DIA AS PER MSCQ-5 SPECIFICATION NO. 03 ISSUE NO. 01 DATED 16/05/2006 Description STAINLESS STEEL WIRE 0.381MM DIA AS PER MSCQ-5 SPECIFICATION NO. 03 ISSUE NO. 01 DATED 16/05/2006 Specification STAINLESS STEEL WIRE 0.381MM DIA AS PER MSCQ-5 SPECIFICATION NO. 03 ISSUE NO. 01 DATED 16/05/2006 Drawing no. Manufacturing Technology Testing / Inspection Facility	70	72039 Ample

22339

T.E. NO. 150134FHPO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
DEVELOPMENT, MANUFACTURE, SUPPLY AND PROVING OF THE 29 SUB ASSEMBLIES OF HYDRAULIC SYSTEM FOR 155 MM GUN Description DEVELOPMENT, MANUFACTURE, SUPPLY AND PROVING OF THE 29 SUB ASSEMBLIES OF HYDRAULIC SYSTEM FOR 155 MM GUN Specification DEVELOPMENT, MANUFACTURE, SUPPLY AND PROVING OF THE 29 SUB ASSEMBLIES OF HYDRAULIC SYSTEM FOR 155 MM GUN Drawing no. Manufacturing Technology Testing / Inspection Facility	90	9 Whole job

22340

107MMETT17002138

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
POWER UNIT FEED UNIT AK 630 ASSY 107 Description POWER UNIT (FEED UNIT) AK-630 ASSY.107 Specification POWER UNIT (FEED UNIT) AK-630 ASSY.107 Drawing no. 107_FEED_UNIT_-ALBUM.pdf Manufacturing Technology AS PER ATTACHMENT PM5.pdf Testing / Inspection Facility AS PER ATTACHMENT PM5.pdf	72	07 Number

22341

116MMETT17002619

Ordnance Factory Kanpur

The Sr.General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Slide to Casting Drg No. D-6385161 Description Slide to Casting Drg No. D-6385161 Specification Slide to Casting Drg No. D-6385161 Drawing no. D-6385161 Manufacturing Technology Testing / Inspection Facility	25	49 Number

22342

116MMETT17002614

Ordnance Factory Kanpur

The Sr.General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Feeder Lever ( Investment Casting) Drg No. D-5178461 Description Feeder Lever ( Investment Casting) Drg No. D-5178461 Specification Feeder Lever ( Investment Casting) Drg No. D-5178461 Drawing no. D-5178461 Manufacturing Technology Testing / Inspection Facility	25	80 Number

22343

116MMETT17002620

Ordnance Factory Kanpur

The Sr.General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Housing to Casting Drg No. D-5178463 Description Housing to Casting Drg No. D-5178463 Specification Housing to Casting Drg No. D-5178463 Drawing no. D-5178463 Manufacturing Technology Testing / Inspection Facility	25	64 Number

Proceed