ARM. R. INVESTMENT MTRL. 4091368

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

ARM. L. INVESTMENT CAST MTRL. 4091367

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

PLATE INVESTMENT CAST MTRL. 4089371

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

PLATE INVESTMENT CAT MTRL. 4089370

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

BRACKET INVESTMENT CAST MTL. 4082382

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

SHAFT INVESTMENT CAST MTL. 4080574

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

BRACKET INVESTMENT CASTING MTL. 4080562

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

BASE PLATE INVEST. CASTING 3053358

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

HANDLE INVESTMENT CAST MATERIAL 5175978

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

BEARING INVESTMENT CAST MT. 4076968

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

BEARING INVESTMENT CAST MT. 4076967

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

INVESTMENT CASTING OF PLATE 5191786

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

INVESTMENT CASTING OF BRACKET 5176854

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

BRACKET INVESTMENT CASING 5176856

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

INVESTMENT CASTING OF LEVER 5176302

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

INVESTMENT CASTING OF LEVER 5176858

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

INVESTMENT CASTING OF HOUSING 5169029

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

INVESTMENT CASTING OF FORK-END. 5169027

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

INVESTMENT CASTING OF LIST.5189617

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

• a

• b

CASING FOR HEAD 1G46 TO DRG NO. AL8635059

AS PER DRAWING

AL8635059

FABRIC NYLON 48 + -2 GMS ORANGE 95 CMS

SPECN:ADRDE/specn./2002/56(b) variety NO.2

FABRIC NYLON 48+-2 GM PLAIN WEAVE U/D 100 CM WIDTH.

ADRDE/SPECN/2002/56 (b)(VTY.NO.2)

Tape Nylon 25 MM BS 450 KG U/D

ADRDE/SPECN/1992/38(b)

• As Per Specification/Drawing

• As Per Specification/Drawing

IND/ENG/PROV/1170/c, Drawing No. ISK:0791/C

IND/ENG/PROV/1170/c, Drawing No. ISK:0791/C

Drawing No. ISK:0791/C

IND/ENG/PROV/1170/b Drawing No. ISK:0791/C

IND/ENG/PROV/1170/b Drawing No. ISK:0791/C

Drawing No. ISK:0791/C

IND/ENG/PROV/1170/b Drawing No. ISK:0791/C

IND/ENG/PROV/1170/b Drawing No. ISK:0791/C

Drawing No. ISK:0791/C

IND/ENG/PROV/1170/b Drawing No. ISK:0791/C

IND/ENG/PROV/1170/b Drawing No. ISK:0791/C

Drawing No. ISK:0791/C

TAPE NYLON 26 MM 2150 kgf

Specn. No.- ADRDE/SPECN/70(b), variety No. 1 Page No. 15 of 25 as per No. ADRDE/QMS/TDTM/SPECN/85.

• As per Specn/Drg

• As per Specn/Drg

SPECN. NO. : ADDE/BP/1(b).ROLL LENGTH 100 MTR.EXCLUDING SAMPLING

SPECN. NO. : ADDE/BP/1(b).ROLL LENGTH 100 MTR.EXCLUDING SAMPLING

FABRIC NYLON 52 GMS UNDYED 91.4 CMS.

SPECIFICATON NO.:-ADRDE/SPECN/1988/32

WIDTH-15(+1/-0)MM,THICKNESS-0.50MM(MAX),WEIGHT/MTR-4.6gm(max. BREAKING STRENGTH :185 KG(MIN) HEAT SETTING :PROPER HEAT SETTING REQUIRED TOTAL NO.OF ENDS :120 NO. PICKS/CM :12 NO. DENIER OF YARN :(a)ENDS:245,(b)PICKS:210 TPM(RANG) :WARP:80-95,(b)WEFT:85-90 EXTENSION AT BREAK :20-30% WEAVE :OXFORD(2 ENDS WERKING AS ONE)

WIDTH-15(+1/-0)MM,THICKNESS-0.50MM(MAX),WEIGHT/MTR-4.6gm(max. BREAKING STRENGTH :185 KG(MIN) HEAT SETTING :PROPER HEAT SETTING REQUIRED TOTAL NO.OF ENDS :120 NO. PICKS/CM :12 NO. DENIER OF YARN :(a)ENDS:245,(b)PICKS:210 TPM(RANG) :WARP:80-95,(b)WEFT:85-90 EXTENSION AT BREAK :20-30% WEAVE :OXFORD(2 ENDS WERKING AS ONE)

FABRIC NYLON 37GM ORANGE 122CM WIDTH RIP STOP 3X3

Specification: IS:4726-1984.

BUCKLE ADRDE/1429-01

BUCKLE A.B.C DRG.NO. ADRDE/1429-01

BUCKLE A.B.C DRG.NO. ADRDE/1429-01

• As Per Specification/Drawing

• As Per Specification/Drawing

THREAD SEWING NYLON LIGHT OG VARIETY NO. L- 2. 3 STAND OG (BL-35N(MIN)) SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2).

SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2).

AS PER SPECIFICATION

SHIELDED MULTISTRAND FLEXIBLE WIRE (PVC INSULATED & VARNISHED COTTON YARN BRAIDED WIRE) BPVLE-1.50 SQMM (19/0.32) FOR ELECTRICAL MAINS EQUIPMENT WITH MINIMUM ELONGATION OF 15% (TESTED AT USER END) AS PER SEPC. NO. OLF/MSD/WIRE/05/MOD-1

AS PER SPECIFICATION

SHIELDED MULTISTRAND FLEXIBLE WIRE (PVC INSULATED & VARNISHED COTTON YARN BRAIDED WIRE) BPVLE-0.75 SQMM (7/0.37) FOR ELECTRICAL MAINS EQUIPMENT WITH MINIMUM ELONGATION OF 15% (TESTED AT USER END) AS PER SEPC. NO. OLF/MSD/WIRE/05/MOD-1

AS PER SPECIFICATION

WIRE MGTF 0.2 AS PER TU16-505.185-71

AS PER SPECIFICATION

SHIELDED MULTISTRAND FLEXIBLE WIRE (FIBROUS LAPPED & PVC INSULATED WIRE) MGSHV-0.35 SQMM (19/0.16) FOR INSTRUMENTS WITH MINIMUM ELONGATION OF 15% (TESTED AT USER END) AS PER SEPC. NO. OLF/MSD/WIRE/01/MOD-1

AS PER SPECIFICATION

SHIELDED MULTISTRAND FLEXIBLE WIRE (FIBROUS LAPPED & PVC INSULATED WIRE) MGSHVE-0.20 SQMM (7/0.20) FOR INSTRUMENTS WITH MINIMUM ELONGATION OF 15% (TESTED AT USER END) AS PER SEPC. NO. OLF/MSD/WIRE/01/MOD-1

AS PER SPECIFICATION

SHIELDED MULTISTRAND FLEXIBLE WIRE (FIBROUS LAPPED & PVC INSULATED WIRE) MGSHVE-0.14 SQMM (18/0.10) FOR INSTRUMENTS WITH MINIMUM ELONGATION OF 15% (TESTED AT USER END) AS PER SEPC. NO. OLF/MSD/WIRE/01/MOD-1.

AS PER SPECIFICATION

UNSHIELDED MULTISTRAND FLEXIBLE WIRE (FIBROUS LAPPED & PVC INSULATED WIRE) MGSHV-1.0 SQMM (32/0.20) FOR INSTRUMENTS WITH MINIMUM ELONGATION OF 15% (TESTED AT USER END) AS PER SEPC. NO. OLF/MSD/WIRE/01/MOD-1 (COLOUR-BROWN)

SHIELDED MULTISTRAINED FLEXIBLE WIRE (FILM LAPPED AND PVC INSULATED WIRE ) MGSHVE-0.35 SQMM (19/0.16) RUSSIAN SPCN TY-16-505-437-82

SHIELDED MULTISTRAINED FLEXIBLE WIRE (FILM LAPPED AND PVC INSULATED WIRE ) MGSHVE-0.35 SQMM (19/0.16) RUSSIAN SPCN TY-16-505-437-82

WIRE-MGTF-0.12, TY16.505.185.71

WIRE-MGTF-0.12, TY16.505.185.71

UNSHIELDED MULTISTRAND FLEXIBLE WIRE (FILM LAPPED AND PVC INSULATED WIRE) MGSHV-0.20 SQMM (7/0.020), RUSSIAN SPCN. TY 16-505-437-82)

UNSHIELDED MULTISTRAND FLEXIBLE WIRE (FILM LAPPED AND PVC INSULATED WIRE) MGSHV-0.20 SQMM (7/0.020), RUSSIAN SPCN. TY 16-505-437-82)

WIRE MM-0.1 AS PER SPECN. NO. TY16.K71-087-90

WIRE MM-0.1 AS PER SPECN. NO. TY16.K71-087-90

BRAID PML 4X5 AS PER SPECN. NO. TY22-3708-76

BRAID PML 4X5 AS PER SPECN. NO. TY22-3708-76

SLEEVE 305 TV-40,6 AS PER SPECN. NO. GOST-19034-82

SLEEVE 305 TV-40,6 AS PER SPECN. NO. GOST-19034-82

SLEEVE 305 TV-40, 4 AS PER SPEC. NO. GOST-19034-82

SLEEVE 305 TV-40, 4 AS PER SPEC. NO. GOST-19034-82

SLEEVE 305 TV-40, 2.5 AS PER SPECN. NO. GOST-19034-82

SLEEVE 305 TV-40, 2.5 AS PER SPECN. NO. GOST-19034-82

SLEEVE 305 TV-40, 2 AS PER SPECN. NO. GOST-19034-82

SLEEVE 305 TV-40, 2 AS PER SPECN. NO. GOST-19034-82

WIRE MM-1.00 AS PER SPECN. NO. TY16.K71-087-90

WIRE MM-1.00 AS PER SPECN. NO. TY16.K71-087-90

WIRE MM-0.12 AS PER SPECN. NO. TU16-K71-087-90

WIRE MM-0.12 AS PER SPECN. NO. TU16-K71-087-90

WIRE MGSHV 0.5 ZH AS PER SPECN. NO. TU16.505.437-82

WIRE MGSHV 0.5 ZH AS PER SPECN. NO. TU16.505.437-82

WIRE MGTF 0.35 AS PER SPECN. NO. TU16-505-185-71

WIRE MGTF 0.35 AS PER SPECN. NO. TU16-505-185-71

WIRE MPO 0.2 AS PER DRG. NO. TU16-505-339-79

WIRE MPO 0.2 AS PER DRG. NO. TU16-505-339-79

WIRE MGTFE 0.12 TO SPEC NO. TU16-505.185-71

WIRE MGTFE 0.12 TO SPEC NO. TU16-505.185-71

WIRE MGTF 0.2 TO SPEC NO. TU16-505.185-71

WIRE MGTF 0.2 TO SPEC NO. TU16-505.185-71

WIRE MGTF 0.07 AS PER SPECIN NO. TU16-505.185-71

WIRE MGTF 0.07 AS PER SPECIN NO. TU16-505.185-71

TU16-505.185-71

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

1- Width(mm) --- 25 mm. Appendix B of IS:3846:1984 2- Mass(gm/mt.)---12(max). Appendix C of IS:3846:1984 3- Ends(in full/width)------ 85+4/-0. IS:1963 4- Picks/cm.--- 20+2/-0 (total picks based on two thread working as one) IS:1963 5- Breaking load(20 cm X full width)("KN.") Minimum--2.4 IS:1969 6- Nature of material--100% Polyster. IS:667 7- pH Value(Cold Method)--6 to 8.5. IS:1390 8- % Water soluble matter(max)-- 1%. IS:3456 9- Weave-- 2/2 Twill weave. Visual

1- Width(mm) --- 25 mm. Appendix B of IS:3846:1984 2- Mass(gm/mt.)---12(max). Appendix C of IS:3846:1984 3- Ends(in full/width)------ 85+4/-0. IS:1963 4- Picks/cm.--- 20+2/-0 (total picks based on two thread working as one) IS:1963 5- Breaking load(20 cm X full width)("KN.") Minimum--2.4 IS:1969 6- Nature of material--100% Polyster. IS:667 7- pH Value(Cold Method)--6 to 8.5. IS:1390 8- % Water soluble matter(max)-- 1%. IS:3456 9- Weave-- 2/2 Twill weave. Visual

TAIL UNIT ASSY OF 100-120 KG AREAL BOMB, DRG NO- RFI SK 9980. CONSISTS OF 01 NO. OF CONE (RFI SK 9976), 04 NOS OF STABILISER FIN (RFI SK 9995), 01 NO OF STABILISER RING ASSY (RFI SK 9975) & 01 NO OF BASE BUSH (RFI SK 9996).

TAIL UNIT ASSY OF 100-120 KG AREAL BOMB, DRG NO- RFI SK 9980. CONSISTS OF 01 NO. OF CONE (RFI SK 9976), 04 NOS OF STABILISER FIN (RFI SK 9995), 01 NO OF STABILISER RING ASSY (RFI SK 9975) & 01 NO OF BASE BUSH (RFI SK 9996).

DRG NO- RFI SK 9980. CONSISTS OF 01 NO. OF CONE (RFI SK 9976), 04 NOS OF STABILISER FIN (RFI SK 9995), 01 NO OF STABILISER RING ASSY (RFI SK 9975) & 01 NO OF BASE BUSH (RFI SK 9996).

ARM SEAR CONNECTING (THROUGH MIM ROUTE) DRG. REF. NO. 1005-003196 AND DRG. NO. RFI. SK. 10118.

ARM SEAR CONNECTING (THROUGH MIM ROUTE) DRG. REF. NO. 1005-003196 AND DRG. NO. RFI. SK. 10118.

DRG. REF. NO. 1005-003196 AND DRG. NO. RFI. SK. 10118.

PLUNGER,LEVER,TRIPPING (THROUGH MIM ROUTE) DRG. REF. NO.1005-003181 AND DRG. NO. RFI. SK. 10127 FOR 9MM AUTO PISTOL

PLUNGER,LEVER,TRIPPING (THROUGH MIM ROUTE) DRG. REF. NO.1005-003181 AND DRG. NO. RFI. SK. 10127 FOR 9MM AUTO PISTOL

DRG. REF. NO.1005-003181 AND DRG. NO. RFI. SK. 10127

LINK,HAMMER (THROUGH MIM ROUTE) DRG. REF. NO. 3040-003489AND DRG. NO. RFI. SK. 10117 FOR 9MM AUTO PISTOL

LINK,HAMMER (THROUGH MIM ROUTE) DRG. REF. NO. 3040-003489AND DRG. NO. RFI. SK. 10117 FOR 9MM AUTO PISTOL

DRG. REF. NO. 3040-003489AND DRG. NO. RFI. SK. 10117

TRIGGER (THROUGH MIM ROUTE) DRG. REF. NO.1005-003184AND DRG. NO. RFI. SK. 10129.FOR 9MM AUTO PISTOL

TRIGGER (THROUGH MIM ROUTE) DRG. REF. NO.1005-003184AND DRG. NO. RFI. SK. 10129.FOR 9MM AUTO PISTOL

DRG. REF. NO.1005-003184AND DRG. NO. RFI. SK. 10129

PLATE LOCKING (THROUGH MIM ROUTE) DRG. REF. NO.1005-003205AND DRG. NO. RFI. SK. 10126

PLATE LOCKING (THROUGH MIM ROUTE) DRG. REF. NO.1005-003205AND DRG. NO. RFI. SK. 10126

DRG. REF. NO.1005-003205AND DRG. NO. RFI. SK. 10126

EJECTOR (THROUGH MIM ROUTE) DRG. REF. NO. 1005-003156 ANDDRG. NO. RFI. SK. 10121 FOR 9MM AUTO PISTOL

EJECTOR (THROUGH MIM ROUTE) DRG. REF. NO. 1005-003156 ANDDRG. NO. RFI. SK. 10121 FOR 9MM AUTO PISTOL

DRG. REF. NO. 1005-003156 ANDDRG. NO. RFI. SK. 10121

SEAR (THROUGH MIM ROUTE)DRG. REF. NO. 1005-003172 ANDDRG. NO. RFI. SK. 10125. FOR 9MM AUTO PISTOL

SEAR (THROUGH MIM ROUTE)DRG. REF. NO. 1005-003172 ANDDRG. NO. RFI. SK. 10125. FOR 9MM AUTO PISTOL

DRG. REF. NO. 1005-003172 ANDDRG. NO. RFI. SK. 10125.

CATCH MAGAZINE (THROUGH MIM ROUTE)DRG. REF. NO.1005-003148AND DRG. NO. RFI. SK. 10123 FOR 9MM AUTO PISTOL

CATCH MAGAZINE (THROUGH MIM ROUTE)DRG. REF. NO.1005-003148AND DRG. NO. RFI. SK. 10123 FOR 9MM AUTO PISTOL

DRG. REF. NO.1005-003148AND DRG. NO. RFI. SK. 10123

LEVER TRIPPING (THROUGH MIM ROUTE) DRG. REF. NO.5340-016094 AND DRG. NO. RFI. SK. 10122 FOR 9MM AUTO PISTOL

LEVER TRIPPING (THROUGH MIM ROUTE) DRG. REF. NO.5340-016094 AND DRG. NO. RFI. SK. 10122 FOR 9MM AUTO PISTOL

DRG. REF. NO.5340-016094 AND DRG. NO. RFI. SK. 10122

IC BLOCK GAS OF 7.62 MM ASSUALT RIFLE GHAATAK, RFI SK. NO.9727*AR (LT.DC. NO. 11E/026/17 DT.25/05/2017

IC BLOCK GAS OF 7.62 MM ASSUALT RIFLE GHAATAK, RFI SK. NO.9727*AR (LT.DC. NO. 11E/026/17 DT.25/05/2017

RFI SK. NO.9727*AR (LT.DC. NO. 11E/026/17 DT.25/05/2017

FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521

FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521

DRG. NO. RFI SK NO.9521

I/C BRACKET FORE SIGHT FOR 7.62 MM ASSAULT RIFLE (GHAATAK)DRG. NO. RFI SK-9919AR

I/C BRACKET FORE SIGHT FOR 7.62 MM ASSAULT RIFLE (GHAATAK)DRG. NO. RFI SK-9919AR

RFI SK-9919AR

PISTON (MODIFIED), DRG. NO. AR/07/2-RFI FOR 7.62 ASSAULT RIFLE (GHAATAK).

PISTON (MODIFIED), DRG. NO. AR/07/2-RFI FOR 7.62 ASSAULT RIFLE (GHAATAK).

DRG. NO. AR/07/2-RFI

No.IS:2771 WITH WATER ABSORPTION / COBB TEST

No.IS:2771 WITH WATER ABSORPTION / COBB TEST

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

Boxes Fibre Board Rigid Corrugated Triple Wall 7 Ply of Size 700mmx450mmx400mm CQA(GS)/US/460

CQA(GS)/US/460

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

IND/TC/4675 & Approved Samples

IND/TC/4675 & Approved Samples

Rope Polypropylene 3 Strands H/Log 6 mm Dia

IND/TC/2324(b)

FISCHER CONNECTORS MAKE CA S 104 A092-140+ TERMINATION 1 OTHER END OPEN CABLE SHIELDED 19*28 AWG PUR JACKET COLOUR BLACK LENGTH 1.5 MTR.

FISCHER CONNECTORS MAKE CA S 104 A092-140+ TERMINATION 1 OTHER END OPEN CABLE SHIELDED 19*28 AWG PUR JACKET COLOUR BLACK LENGTH 1.5 MTR.

FISCHER CONNECTORS MAKE DBPU 104 A092-149 PANEL MOUNT RECEPTACLE WITH 19 FEMALE SOLDER BUCKET PINS

FISCHER CONNECTORS MAKE DBPU 104 A092-149 PANEL MOUNT RECEPTACLE WITH 19 FEMALE SOLDER BUCKET PINS