COPPER WIRE ROD 7.9/8 MM DIA

SPECIFICATION IS: 12444-1988

Specn. No. IS:14181 (Pt.1 to 3): 2002, AMDT.-2 RA-2013

Specn. No. IS:14181 (Pt.1 to 3): 2002, AMDT.-2 RA-2013

S/5432/PW/TC-19(a),Min Width 142 cms required to be water repellant & should conform to standard / values laid down in R/O the bundesmann test as mentioned in Clause 6.1(q) of above specification. Testing of % composition of Wool & polyester should be done as per IS: 2006-1988 2nd Revision Amendment No.1 & the method of Calculation to be based on dry mass basis only as per Clause 9.4.1 of specification.

S/5432/PW/TC-19(a),Min Width 142 cms required to be water repellant & should conform to standard / values laid down in R/O the bundesmann test as mentioned in Clause 6.1(q) of above specification. Testing of % composition of Wool & polyester should be done as per IS: 2006-1988 2nd Revision Amendment No.1 & the method of Calculation to be based on dry mass basis only as per Clause 9.4.1 of specification.

CLOTH DUCK POLYESTER/COTTON BLENDED RIP STOP OG WP ROT PROOF 135 CM.

SPECN.NO. IS:13510-2000, V.NO.1 (TABLE-1 OF CLAUSE 5.1)

LATEX FOAM RUBBER SOLID TYPE 19 MM THICK 91 CM X 122 CM

IS:1741 GR.'D'

LATEX FOAM RUBBER SHEET SOLID TYPE 50 MM THICK X 0.60 MTR. X 1.20 MTR.

HARD GRADE OF IS:1741-1960(AMENDMENT No.4,March 1992)

LATEX FOAM RUBBER SOLID TYPE 25MM THICK X .60M X 1.20M

HARD GRADE OF IS:1741-1960 (AMENDMENT NO.4, MARCH 1992)

FABRIC NYLON PU COATED BLACK GSM-250 WIDTH- 172CM

IND/TC/0155, and Appendix ‘A’ of specification IND/TC/3847(A)

• As per Specification

• As per Specification

BLACK MESH LINING OF 200 GSM WITH ANTIBACTERIAL TREATMENT, WIDTH -150CMS MIN.

IND/TC/3847(A),AS per terms & condition enclosed. NOTE: SAMPLE MUST BE GOT APPROVED BEFORE BULK SUPPLY.

FABRIC NYLON 66 BREATHABLE POLY URETHENE COATED DISRUPTIVE ARMY COMOFLAGE PATTER N 180 +2 CM (NO NEGATIVE TOLERANCE) WIDE

CQA(T&C)PROV.SPECN.NO.PROV/S/3566/RAIN CAPE MP DIS/TC-15(d)

FABRIC NYLON 300 GSM RIP STOP PU COATED F.R. 152

IND/TC/0155 AND AS PER ANNEXURE "A'

FABRIC NYLON 66 AIRTEXTURED PU COATED INDIAN ARMY PRINT 135/136 CMS

SPECN. NO. IND / TC / 0155 AND AS PER ANNEXURE 'A' ATTACHED

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

IS: 1029-1970

IS: 1029-1970

IS: 1029

IS: 1029

IS: 2507-1965 GRADE-1 OR 2

IS: 2507-1965 GRADE-1 OR 2

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT AND SPECIFICATION

IS:2507 GR.4 ANNEALED

IS:2507 GR.4 ANNEALED

as per requirement

as per tender condition

as per requirement

as per tender condition

IS: 1029-1970

IS: 1029-1970

IS: 5872-1973

IS: 5872-1973

HOLDING OPENING DEVICE(HOD) DRG.NO. 0204 03 02 00 01 006 00DD FOR JVPC 5.56MM (MIM ROUTE)

DRG.NO. 0204 03 02 00 01 006 00DD FOR JVPC 5.56MM

HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW

HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW

DRG NO. 0204-03-03-00-08-000-00DC

SCREW AXIS REAR SIGHT DRG NO. 0204 03 02 00 01 003 00DC FOR JVPC 5.56MM (MIM ROUTE)

DRG NO. 0204 03 02 00 01 003 00DC FOR JVPC 5.56MM

FABRIC NYLON 32G U/D 100 CM WIDTH

SPECN-AS PER PARTICULARS. (a) MASS/MET. :33 GM(MAX) (b)BREAKING STRENGTH(BOTHWAYS) :38 KGF(MIN)TESTING METHOD OF B.S.IS:1969-1968 (c)TEARING STRENGTH(BOTHWAYS) :1.7KGF(MIN) TESTING METHOD OF TEARING STRENGTH IS:4726-1964 APP.'D'. (d)AIRPOROSITY:16-22CV.FT/SQ.FT/SEC. (e)THICKNESS:0.07MM(MAX) AT PRESSURE 200GM/SQCM (f)WIDTH: 100 CM. (g)WEAVE :PLAIN (h)YARN LINEAR DENSITY BOTHWAYS:30 DENIER(NOMINAL) (i)TWIST OF YARN :WARP:200TPM, WEFT:SPIN(10-30 TPM) (j)THREAD DENSITY BOTHWAYS :44-45 PER CM. THERE SHOULD NOT BE ANY YARN DISTORTION/SLIPPAGE IN FABRIC

SPECN. NO. IND/GS/1871.

SPECN. NO. IND/GS/1871.

SPECIFICATION NO. : ADDE/BP/3(c).

SPECIFICATION NO. : ADDE/BP/3(c).

THREAD SEWING NYLON BL-106 N O.G. SPECIFICATION NO. IS:4229-1992 V.NO.H-2.

SPECIFICATION NO. IS:4229-1992 V.NO.H-2.

DRG.NO.ADRDE/1339

DRG.NO.ADRDE/1339

TIN INGOT GD SN 99.75% IS;26-1966

TIN INGOT GD SN 99.75% IS;26-1966

Hot Rolled Steel Rod 90MM(+/-1) Dia to Specn.IS:5517-1978, 35 MN6 MO3 RS100 MN to be Heat Treated to Achieve Hardness 210 to 260 VPN in Finished Condition

Hot Rolled Steel Rod 90MM(+/-1) Dia to Specn.IS:5517-1978, 35 MN6 MO3 RS100 MN to be Heat Treated to Achieve Hardness 210 to 260 VPN in Finished Condition

Specn.IS:5517-1978, 35 MN6 MO3 RS100 MN

PACKING RING SET FOR TRAVERSING CYLINDER

PACKING RING SET FOR TRAVERSING CYLINDER

6330489, 6333025, 6333021, 6333023, 6345041, 6333024, N9-8, N9-19

PACKING RING SET FOR ELEVATING CYLINDER

PACKING RING SET FOR ELEVATING CYLINDER

6330480, 6330481, 6330484, 6330485, 6330486, 6330487, 6330488, 6330482, 6330489, 6367997, N9-8

PACKING RING SETS FOR PRESSURE VESSEL

PACKING RING SETS FOR PRESSURE VESSEL

N9-8, 5181230 , N9-19

PACKING SETS FOR RECOIL BUFFER COMPRISING OF 09 ITEMS

PACKING SETS FOR RECOIL BUFFER COMPRISING OF 09 ITEMS

6332993, 6365878, N9-8, N9-19,

As per requirements & specifications

As per requirements & specifications

Cord Nylon 1785 N Undyed BL White JSS:4020-9-2013(Revision No. 3)

Cord Nylon 1785 N Undyed BL White JSS:4020-9-2013(Revision No. 3)

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

ELASTIC CORD BLACK ELASTIC CORD BLACK BEST TRADE QUALITY AS PER PROVISIONAL SPECIFICATION NO. S/2594/CCD ARMY LOGO/TC-15(a)

ELASTIC CORD BLACK ELASTIC CORD BLACK BEST TRADE QUALITY AS PER PROVISIONAL SPECIFICATION NO. S/2594/CCD ARMY LOGO/TC-15(a)

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

Sodium Bi Carbonate

IS: 2124-1974

as per the requirement

as per the tender condition

as per the requirement

as per the requirement

as per the requirement

as per the requirement

as per requirement

as per requirement

as per the requirement

as per the requirement

as per the requirement

as per the requirement

DIAMMONIUM PHOSPHATE

AS PER REQUIREMENT AND SPECIFICATION

CAUSTIC SODA TECHNICAL

IS:252-1973

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

as per the requirement

as per the requirement

as per the requirement

as per the requirement

Elastic Black 3cm Wide Best trade quality as per provisional specification no.-S/2594/CCD army logo/TC-15(a)

Best trade quality as per provisional specification no.-S/2594/CCD army logo/TC-15(a)

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

AMMONIUM SULPHATE (FERTILISER GRADE)

AS PER REQUIREMENT & SPECIFICATION

as per specification

as per specification

FORE SIGHT AS PER DRG.NO.0204 03 02 00 01 010 00DA

FORE SIGHT AS PER DRG.NO.0204 03 02 00 01 010 00DA

DRG.NO.0204 03 02 00 01 010 00DA

SIGHT LEAF FOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204 03 02 00 01 008 00DB

DRG.NO.0204 03 02 00 01 008 00DB

LEVER STUD CHANGE RIGHT DRG NO. 0204 03 02 00 02 001 00DE FOR JVPC 5.56MM (MIM ROUTE)

DRG NO. 0204 03 02 00 02 001 00DE FOR JVPC 5.56MM

SYNTHETIC RUBBER BASED ADHESIVE FOR JOINING OF COMPONENTS OF BOOT HIGH ANKLE DVS" ADHESIVE DUNLOP S-758 (DUNLOP)/FIXOBONDPC-70A(DENTRITE)/FEVICOLE SR-505(PIDILI

S.T.S

WIRE THREAD INSERT TYPE MID GRIP TO DRG.NO. N3-9003-6X6 ART NO. 10352127.

WIRE THREAD INSERT TYPE MID GRIP TO DRG.NO. N3-9003-6X6 ART NO. 10352127.

DRG.NO. N3-9003-6X6 ART NO. 10352127.

AS PER DRAWING/TECHNICAL PARTICULARS

AS PER DRAWING/TECHNICAL PARTICULARS

ACID BORIC TECHNICAL

AS PER REQUIREMENT AND SPECIFICATION

Sodium Formate

STS But purity should not be less than 95% material shall be white crystal/ powder of sodium formate free from visible impurities

Polypropylene Strapping 0.5 mm Thick and 12 mm wide in white Colour (Duly Printed with Bilingual OCFS Name & OFB Logo in Red Colour) Quantity per roll 2000 mtrs. With core dia 8 inches suitable for strapping by Heat sealing method through Strapping Device. Specification No. JSS:8135-10:2004. as per relevant clause of specification.

Polypropylene Strapping 0.5 mm Thick and 12 mm wide in white Colour (Duly Printed with Bilingual OCFS Name & OFB Logo in Red Colour) Quantity per roll 2000 mtrs. With core dia 8 inches suitable for strapping by Heat sealing method through Strapping Device. Specification No. JSS:8135-10:2004. as per relevant clause of specification.

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

TRADE ASSISTANCE FOR LASTING OPERATION OF BOOT HIGH ANKLE DVS OF VARIOUS SIZES

AS PER SPECIFICATION

TRADE ASSISTANCE TO STITCH COMPLETE CLOSED UPPER OF BHA DVS

IND/TC/3844

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

TRADE ASSISTANCE FOR PACKING OPERATION OF BHA DVS AS PER T&C ELCLOSED

IND/TC/3844

TRADE ASSISTANCE FOR CLICKING OPERATION OF BOOT HIGH ANKLE DVS FOR VARIOUS SIZES

IND/TC/3844

EYELETTING OF CLOSED UPPERS

IND/TC/3844

TRADE ASSISTANCE FOR BRASS HOOK FIXING OF BOOT HIGH ANKLE DVS (IMPROVED VERSION) OF VARIOUS SIZED (TERMS AND CONDITIONS ENCLOSED)

IND/TC/3844

ITEM CODE 7000320151- NIRBHEEK GRIP(R) & GRIP(L) SUB ASSY

NIRBHEEK GRIP(R) & GRIP(L) SUB ASSY AS PER DRG. NO. SK01690

SK01690

PRISM ASSY. OPTICAL INSTRUMENT DRG. No. AU.5.035.057 TNPO-168B

PRISM ASSY. OPTICAL INSTRUMENT DRG. No. AU.5.035.057 TNPO-168B

VIDEO PROCESSING BOARD DRG NO. 096701070400000 ALONGWITH CONNECTORS AND MATING CABLE AS PER ATTACHED DRG/SPECN. AS APPENDIX-1 OF 0 TO 18 PAGES ( TOTAL 19 SHEETS)

VIDEO PROCESSING BOARD DRG NO. 096701070400000 ALONGWITH CONNECTORS AND MATING CABLE AS PER ATTACHED DRG/SPECN. AS APPENDIX-1 OF 0 TO 18 PAGES ( TOTAL 19 SHEETS)

CAPACITOR KT4-25B-250V-4/20 PF-M75-V AS PER SPECN. NO. OZHO.460.135 TY

CAPACITOR KT4-25B-250V-4/20 PF-M75-V AS PER SPECN. NO. OZHO.460.135 TY

CAPACITOR K73-16-63V-5.6 MKF +/-5% -V AS PER SPECN. NO. OZHO.461.108 TY

CAPACITOR K73-16-63V-5.6 MKF +/-5% -V AS PER SPECN. NO. OZHO.461.108 TY

CAPACITOR K73-16-63V-1.8 MKF +/-5%-V AS PER SPECN. NO. OZHO.461.108 TY

CAPACITOR K73-16-63V-1.8 MKF +/-5%-V AS PER SPECN. NO. OZHO.461.108 TY

CAPACITOR K73-16-63V-0.56 MKF +/-5%-V AS PER SPECN. NO.OZHO.461.108 TY

CAPACITOR K73-16-63V-0.56 MKF +/-5%-V AS PER SPECN. NO.OZHO.461.108 TY