BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION.

BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

CAP QX-438 WITHOUT SURFACE TREATMENT & EMBOSSING. DC NO. 37326-A DATED: 03/12/2012

CAP QX-438 WITHOUT SURFACE TREATMENT & EMBOSSING. DC NO. 37326-A DATED: 03/12/2012

BRASS ROUND 38.1+0.25mm DIA TO SPEC BS 2874-CZ 121, PB-3 "M" CONDITION (LATEST ISSUE) IN THE STRAIGHT LENGTH OF 3 MTR +/- 2% LONG BAR.

BRASS ROUND 38.1+0.25mm DIA TO SPEC BS 2874-CZ 121, PB-3 "M" CONDITION (LATEST ISSUE) IN THE STRAIGHT LENGTH OF 3 MTR +/- 2% LONG BAR.

BRASS RODS 28.5 mm DIA

BRASS RODS 28.5 mm DIA BS 2874-CZ 121, PB-3 "M" CONDITION (LATEST ISSUE) STRAIGHT LENGTH 1.828 TO 2.133 MTR.

AS PER DRG & SPECIFICATION

AS PER DRG & SPECIFICATION

SPIGOT TO DS. CAT. NO. 1005-001756 IN FINISHED CONDITION

SPIGOT TO DS. CAT. NO. 1005-001756 IN FINISHED CONDITION

SPIGOT TO DS. CAT. NO. 1005-001756 IN FINISHED CONDITION

SPIGOT TO DS. CAT. NO. 1005-001756 IN FINISHED CONDITION

BRASS SEAMLESS TUBE TO EXTRUSION( DRG. NO. M-9547A) REQUIRED FOR PR. 19B MATERIAL SHOULD BE AS PER PHYSICAL AND CHEMICAL STD. LAID DOWN IN THE GSF DRG. NO. M-9547

BRASS SEAMLESS TUBE TO EXTRUSION( DRG. NO. M-9547A) REQUIRED FOR PR. 19B

BRASS TUBE(M-10583B) TO SPEC. JSS 9535-02:1995 (REV. NO.1) UNANNEALED AND STRESS RELIEVED FOR PR. 18A MAGAZINE(DRG. NO.IQX-192) THE TUBING MUST BE SUBJECTED TO AN INTERNAL HYDRAULIC PRESSURE OF 55.13 MPa AND TO ENSURE MATERIAL IS FREE FROM CRACKS, PERMANENT SET AND OTHER DEFECTS.

BRASS TUBE(M-10583B) TO SPEC. JSS 9535-02:1995 (REV. NO.1) UN ANNEALED AND STRESS RELIEVED

• As per Attachment

• As per Attachment

BRASS PRESSING BLANKS TO DRG. NO. 1896/1G

BRASS PRESSING BLANKS TO DRG. NO. 1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG. NO. QX-1709 DC 36123-A. DT. 06.06.96

ZINC BASE ALLOY DIE CAST FOR "HEAD FLASH IGNITER" TO CASTING DRG. NO-1612 C

ZINC BASE ALLOY DIE CAST FOR "HEAD FLASH IGNITER" TO CASTING DRG. NO-1612 C

Zinc Base Alloy Die Cast "Trigger" to DRG. NO.-1618/1

Zinc Base Alloy Die Cast "Trigger" to DRG. NO.-1618/1

DIE CAST (ZINC BASE ALLOY) TO DRG. NO.-1617/A

DIE CAST (ZINC BASE ALLOY) TO DRG. NO.-1617/A

DIE CAST (ZINC BASE ALLOY) DRG. NO-1616 B

DIE CAST (ZINC BASE ALLOY) DRG. NO-1616 B

DRG NO 1651/A OF HEAD (PART NO IQX-310) FOR FMC 605M

DRG NO 1651/A OF HEAD (PART NO IQX-310) FOR FMC 605M

FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)

FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)

NAI(J) 501/6/3(P) FOR Fz DASD AK-630

NAI(J) 501/6/3(P) FOR Fz DASD AK-630

SPIRAL TO DRG. NO.bw 8.3.67.009(GSF SK. NO. TF-026) FOR FUZE A 670 M

DRG. NO.bw 8.367.009 FOR FUZE A 670 M(GSF SK. NO. TF-026)

COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 4.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 OR JSS-4710-01-GR III IN AS DRAWN CONDN. TWST PIECE OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECIFIED IN THE SPECIFICATION

COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 4.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 OR JSS-4710-01-GR III IN AS DRAWN CONDN. TWST PIECE OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECIFIED IN THE SPECIFICATION

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "0" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/SQMM, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)

COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)

• AS PER ATTACHMENT

• AS PER ATTACHMENT

COPPER TUBE TO SIZE 39.40+0.35 I/DX3.5+0.25 WALL THICKNESS LENGTH OF 1.5 TO 4 MTR

TO SPEC JSS-4710-01 GRADE 4 WITH CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER DRG. NO-M-1895

COPPER ALLOY TUBE I/D 39.87-0.25 mm THICKNESS 3.2 +0.4 mm , BOTH ENDS CUT IN SQUARE, IN STRAIGHT LENGTH 1.5 TO 3 MTRS. AS PER SPEC NO. JSS-4710-01-88, GR. IV. MECHANICAL PROPERTIES: SAMPLE ON ANNEALING AT 700 (Degree) C FOR 2 HOUR TO SATISFY YIELD, Rm-240 MPa (MIN), % ELONGATION 50 mm-30(MIN)

COPPER ALLOY TUBE I/D 39.87-0.25 mm THICKNESS 3.2 +0.4 mm , BOTH ENDS CUT IN SQUARE, IN STRAIGHT LENGTH 1.5 TO 3 MTRS. AS PER SPEC NO. JSS-4710-01-88, GR. IV. MECHANICAL PROPERTIES: SAMPLE ON ANNEALING AT 700 (Degree) C FOR 2 HOUR TO SATISFY YIELD, Rm-240 MPa (MIN), % ELONGATION 50 mm-30(MIN)

• As per attachment

• As per attachment

ALUMINIUM ROD 22.225 MM +/- 0.25 MM DIA TO SPECN. IS:733-1983 DESIG.64430 IN " WP" CONDITION. PPGG NOT EXCEEDING 1.5 MM ON RADIUS & 2 MTRS TO 3 MTRS LONG

ALUMINIUM ROD 22.225 MM +/- 0.25 MM DIA TO SPECN. IS:733-1983 DESIG.64430 IN " WP" CONDITION. PPGG NOT EXCEEDING 1.5 MM ON RADIUS & 2 MTRS TO 3 MTRS LONG

AL. ROD 22+/-0.25 mm TO SPECIFICATIONIS: 733-1983 DESIG. 64430 IN "WP" CONDITION .

AL. ROD 22+/-0.25 mm TO SPECIFICATIONIS: 733-1983 DESIG. 64430 IN "WP" CONDITION . PPGG NOT EXCEEDING 1.5 MM ON RADIUS

AL. ALLOY ROD 65 mm DIA

AL. ALLOY ROD 65 mm DIA TO SPEC IS:733:1983 GR. 24345 IN "W/P" CONDITION. MAT. CLASS B OF IS:3965-1981, PPGG SHALL BE 4 mm MAX IN RADIUS IN STRAIGHT LENGTH 1.5 TO 3 MTRS.

AS PER DRG. & SPECIFICATION

AS PER DRG. & SPECIFICATION

• AS PER ATTACHMENT

• AS PER ATTACHMENT

MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94

MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94

• AS PER ATTACHMENT

• AS PER ATTACHMENT

DRG. NO. F-1321-425450C FOR FUZE FFV 64C

DRG. NO. F-1321-425450C FOR FUZE FFV 64C

FORGED BLANK FOR ILLUMINATING TIME FUZE BODY TO GSF DRG.NO. F-2316A SPECN.IS:734 GR.24345 WP OR BS: 1472 GR. 2014 S TF

AS PER DRG. NO. F-2316 A

Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15

Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15

• AS PER ATTACHMENT

• AS PER ATTACHMENT

AS PER DRG. NO. M-11022 A

AS PER DRG. NO. M-11022 A

FORGING FOR AXLE (SPINDLE) TO DRG NO. 175-45-025/F

FORGING FOR AXLE (SPINDLE) TO DRG NO. 175-45-025/F

175-45-025/F

DIE FORGING "CRANK" TO DRG NO. 765-31-50. EQUIVALENT MATERIAL: STEEL 817M40

DIE FORGING "CRANK" TO DRG NO. 765-31-50. EQUIVALENT MATERIAL: STEEL 817M40

765-31-50

Plastic Liner to GSF SK NO. M-6810/1

Plastic Liner to GSF SK NO. M-6810/1

• AS PER ATTACHMENT

• AS PER ATTACHMENT

GEAR WHEEL (FORGING DRG) FOR COMPONENT NO. 172-45-070-1/F

GEAR WHEEL (FORGING DRG) FOR COMPONENT NO. 172-45-070-1/F

DRG.NO.. 172-45-070-1/F

DRIVEN GEAR (FORGING) DRG.NO. 175-45-007/F

DRIVEN GEAR (FORGING) DRG.NO. 175-45-007/F

DRG.NO. 175-45-007/F

INTERMEDIATE GEAR (FORGING) TO DRG.NO. 175-45-005/F

INTERMEDIATE GEAR (FORGING) TO DRG.NO. 175-45-005/F

DRG.NO. 175-45-005/F

ROUGH MACHINING OF FRONT PART OF BOMB BODY UPTO OPN 15 OF OP SCHEDULE (ITV-31) SHEET NO. 02 OF 06 DTD 12/01/2016 & AS PER ATTACHED SCOPE OF WORK SCOPE OF WORK /ITV-31/1107/16 DATED 12/10/2016

ROUGH MACHINING OF FRONT PART OF BOMB BODY UPTO OPN 15 OF OP SCHEDULE (ITV-31) SHEET NO. 02 OF 06 DTD 12/01/2016 & AS PER ATTACHED SCOPE OF WORK SCOPE OF WORK /ITV-31/1107/16 DATED 12/10/2016

F-9G

OIL SEAL TO DRG. NO.54-83-8 CD DETAILED DRG.NO.54-83-25CD, 54-83-029,54-83-027-1, 54-83-028 (T-38-38)

OIL SEAL TO DRG. NO.54-83-8 CD DETAILED DRG.NO.54-83-25CD, 54-83-029,54-83-027-1, 54-83-028 (T-38-38)

DRG. NO.54-83-8 CD DETAILED DRG.NO.54-83-25CD, 54-83-029,54-83-027-1, 54-83-028 (T-38-38)

PIPE TO DRG.NO. 675-38-SB106 SB DETAILED DRG. 675-38-213, 675-38-7

PIPE TO DRG.NO. 675-38-SB106 SB DETAILED DRG. 675-38-213, 675-38-7

DRG.NO. 675-38-SB106 SB

Set of 19 Items for Air Pressure Control Unit to Drg. No. 765-78-CD533, without ADY 2C, as per Enclosure.

Set of 19 Items for Air Pressure Control Unit to Drg. No. 765-78-CD533, without ADY 2C, as per Enclosure.

765-78-CD533

As Per Requirements & Specifications

As Per Requirements & Specifications

FABRICATION OF SOCKS MEN'S WOOL DARK OG Specification:- Fabrication (Knitting, Linking, Asst. to Linking, Washing, Pressing, Checking and Darning) of Socks Men’s Wool Dark OG, As per Specification no. PROV/OCFS/SOCKS/ARMY/NEW 64(a) & ANNEXURE-“A1”

FABRICATION OF SOCKS MEN'S WOOL DARK OG Specification:- Fabrication (Knitting, Linking, Asst. to Linking, Washing, Pressing, Checking and Darning) of Socks Men’s Wool Dark OG, As per Specification no. PROV/OCFS/SOCKS/ARMY/NEW 64(a) & ANNEXURE-“A1”

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

As per Requirements & Specifications

As per Requirements & Specifications

SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR]

SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR]

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

DISC SPACER, DRG/SPEC NO.: OFN/BMCS/M-91/M-92/DISC SPACER

DRG/SPEC NO.: OFN/BMCS/M-91/M-92/DISC SPACER

OFN/BMCS/M-91/M-92/DISC SPACER

Concetrated Nitric Acid, Strength-98% Explosive Grade

Concetrated Nitric Acid, Strength-98% As per IS 264:2005 (Specification of CNA Explosive Grade) All other parameters to be as per (IS 264:2005)

CAPACITOR 10 PF , CERAMIC NPO 100 V MINIATURE CAPACITOR , TYPE : CERAMIC MINIATURE -CLASS -I , NOMINAL CAPACITY : 10 PF, TOLERANCE : +/- 2% PF MAKE :PHILIPS / BCESUD TEMP. COEFF : 750 P.P.M / DEG C NOMINAL VOLTAGE : 100 V CATALOGUE CODE : 2222-682- 58101 (PHILIPS / BCESUED) DRG. NO. 1210101

CAPACITOR 10 PF , CERAMIC NPO 100 V MINIATURE CAPACITOR , TYPE : CERAMIC MINIATURE -CLASS -I , NOMINAL CAPACITY : 10 PF, TOLERANCE : +/- 2% PF MAKE :PHILIPS / BCESUD TEMP. COEFF : 750 P.P.M / DEG C NOMINAL VOLTAGE : 100 V CATALOGUE CODE : 2222-682- 58101 (PHILIPS / BCESUED) DRG. NO. 1210101

CAPACITOR 10 PF , CERAMIC NPO 100 V MINIATURE CAPACITOR , TYPE : CERAMIC MINIATURE -CLASS -I , NOMINAL CAPACITY : 10 PF, TOLERANCE : +/- 2% PF MAKE :PHILIPS / BCESUD TEMP. COEFF : 750 P.P.M / DEG C NOMINAL VOLTAGE : 100 V CATALOGUE CODE : 2222-682-

CERAMIC CAPACITOR NPO - 100 PF DRG NO. 1210201 FOR FUZE FB -40 CAPACITOR TYPE : CERAMIC MINIATURE CLASS -I , CAPACITY :100 PF , TOLERANCE +/- 2% PF MAKE : PHILIPS / BCESUD CATALOGUE CODE : 2222 - 682 - 58101 , TEMP. COEFF : 750 P.P.M / DEGC NOMINAL VOLTAGE : 100 V ( PHILIPS /BCESUD

CERAMIC CAPACITOR NPO - 100 PF DRG NO. 1210201 FOR FUZE FB -40 CAPACITOR TYPE : CERAMIC MINIATURE CLASS -I , CAPACITY :100 PF , TOLERANCE +/- 2% PF MAKE : PHILIPS / BCESUD CATALOGUE CODE : 2222 - 682 - 58101 , TEMP. COEFF : 750 P.P.M / DEGC NOMINAL VOLTAGE : 100 V ( PHILIPS /BCESUD

CERAMIC CAPACITOR NPO - 100 PF DRG NO. 1210201 FOR FUZE FB -40 CAPACITOR TYPE : CERAMIC MINIATURE CLASS -I , CAPACITY :100 PF , TOLERANCE +/- 2% PF MAKE : PHILIPS / BCESUD CATALOGUE CODE : 2222 - 682 - 58101 , TEMP. COEFF : 750 P.P.M / DEGC NOMINAL

HYDRAULIC COUPLING WITH SHAFT ASSEMBLY TO DRG. NO. 172-47-015CD (FLUID DRIVEN WITH SHAFT)

HYDRAULIC COUPLING WITH SHAFT ASSEMBLY TO DRG. NO. 172-47-015CD (FLUID DRIVEN WITH SHAFT)

172-47-015CD

GEAR (FORGING DRG.) TO DRG NO. 175-45-011/F (WEIGHT = 6.95 Kgs.)

GEAR (FORGING DRG.) TO DRG NO. 175-45-011/F (WEIGHT = 6.95 Kgs.)

175-45-011/F

BRACKET ASSEMBLY TO DRG. NO. 175-45-017CD

BRACKET ASSEMBLY TO DRG. NO. 175-45-017CD

175-45-017CD

RIB ASSEMBLY TO DRG NO. 175-45-019CD

RIB ASSEMBLY TO DRG NO. 175-45-019CD

175-45-019CD

GEAR (FORGING DRG.) TO DRG. NO. 175-45-008/F(WEIGHT = 7.75 Kgs.)

GEAR (FORGING DRG.) TO DRG. NO. 175-45-008/F(WEIGHT = 7.75 Kgs.)

175-45-008/F

GEAR (FORGING DRG.) TO DRG. NO. 175-45-010/F (WEIGHT =6.20 Kgs.)

GEAR (FORGING DRG.) TO DRG. NO. 175-45-010/F (WEIGHT =6.20 Kgs.)

175-45-010/F

SINGLE ROW RADIAL BALL BEARING II3L GOST 8338-75 TO MPF/IGB/8338 EQUIVALENT BEARING SKF6013/M/P6, HMT 6013/FY/-6 AND KNK6013/M/P6

SINGLE ROW RADIAL BALL BEARING II3L GOST 8338-75 TO MPF/IGB/8338 EQUIVALENT BEARING SKF6013/M/P6, HMT 6013/FY/-6 AND KNK6013/M/P6

SINGLE ROW RADIAL BALL BEARING II3L GOST 8338-75 TO MPF/IGB/8338 EQUIVALENT BEARING SKF6013/M/P6, HMT 6013/FY/-6 AND KNK6013/M/P6

COUPLING (FORGING) TO DRG NO. 172-47-150- I/F (WEIGHT = 2.52 Kgs.)

COUPLING (FORGING) TO DRG NO. 172-47-150- I/F (WEIGHT = 2.52 Kgs.)

172-47-150- I/F

SHAFT (FORGING) TO DRG. NO. 172-45-026/F (WEIGHT = 3.02 Kgs)

SHAFT (FORGING) TO DRG. NO. 172-45-026/F (WEIGHT = 3.02 Kgs)

172-45-026/F

PLUG REAR TO DRG. NO. ITV-52

PLUG REAR TO DRG. NO. ITV-52

ITV-52

FORGING FOR DISC PRESSURE TO DRG.NO 175-47-024/F (WEIGHT = 2.65 Kgs.)

FORGING FOR DISC PRESSURE TO DRG.NO 175-47-024/F (WEIGHT = 2.65 Kgs.)

175-47-024/F

FORGING FOR GEAR OF SUCTION PUMP TO DRG. NO. 172-46-013-3/F (WEIGHT = 0.725Kgs.)

FORGING FOR GEAR OF SUCTION PUMP TO DRG. NO. 172-46-013-3/F (WEIGHT = 0.725Kgs.)

172-46-013-3/F

BEARING RING (FORGING DRG.) TO DRG. No. 172-47-106-2/F (WEIGHT = 5.3 Kgs)

BEARING RING (FORGING DRG.) TO DRG. No. 172-47-106-2/F (WEIGHT = 5.3 Kgs)

172-47-106-2/F

COUPLING DRIVING (FORGING DRG.) TO DRG. NO. 172-45-172- I/F (WEIGHT = 3.17 Kgs.)

COUPLING DRIVING (FORGING DRG.) TO DRG. NO. 172-45-172- I/F (WEIGHT = 3.17 Kgs.)

172-45-172- I/F

COVER (FORGING DRG.) TO DRG NO. 175-45-051/F & DRG NO. 172-45-036-1/F (WEIGHT - 3.05 Kg)

COVER (FORGING DRG.) TO DRG NO. 175-45-051/F & DRG NO. 172-45-036-1/F (WEIGHT - 3.05 Kg)

175-45-051/F & 172-45-036-1/F

DRIVE GEAR OF PUMP (FORGING) DRG NO. 175-46-001/F (WEIGHT =3.30 Kg.)

DRIVE GEAR OF PUMP (FORGING) DRG NO. 175-46-001/F (WEIGHT =3.30 Kg.)

175-46-001/F

HOUSING (FORGING DRG.) TO DRG NO. 175-45-036A/F (WEIGHT -6.20Kg.)

HOUSING (FORGING DRG.) TO DRG NO. 175-45-036A/F (WEIGHT -6.20Kg.)

175-45-036A/F

FABRICATION OF OVERALL COMBINATION GREENISH KHAKI

FABRICATION OF OVERALL COMBINATION GREENISH KHAKI. SWO PART No. 60158 SPECIFICATION: No. IND/NAVY/TC/4660 WITH AMENDMENT NO.1 NOTE: A) CUT COMPONENTS & GARNITURES WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FABRICATION OF JCD ARMY LOGO (MODIFIED) and FABRICATION OF TCD ARMY LOGO (MODIFIED)

FABRICATION OF JACKET COMBAT PC DISRUPTIVE WITH INDIAN ARMY LOGO (MODIFIED). SWO PART II No.60234 SPECIFICATION No : OCFAV/Garment/001(b) MAKE & SHAPE : AS PER APPROVED SAMPLE NOTE: A) CUT COMPONENTS & GARNITURE WILL BE SUPPLIED BY THE FACTORY B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION. FABRICATION OF TROUSER COMBAT PC DISRUPTIVE WITH INDIAN ARMY LOGO (MODIFIED). SWO Pt II No.60233 SPECIFICATION No. OCFAV/Garment/002(b) MAKE & SHAPE : AS PER APPROVED SAMPLE NOTE: A) CUT COMPONENTS & GARNITURE WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION.

FABRICATION OF SHIRT PW PV DD KHAKI H/S and FABRICATION OF TROUSERS PW PV DD KHAKI

FABRICATION OF SHIRT PW PV DD KHAKI H/S (NEW DESIGN) SWO PART II No. 10236/60236 SPECIFICATION : 1) DESIGN & DIMENSION : AS PER SPECN NO.IND/TC/4698(a) 2) CERTIFIED SAMPLE & SCH.No. CQA (T&C)/TC-15/8(d). NOTE: A) CUT COMPONENTS & GARNITURE WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED. FABRICATION OF TROUSER PW PV DD KHAKI SWO PART II No.60203 SPECIFICATION : 1) DIMENSION : AS PER SPECN NO.IND/TC/4630(L) 2) CERTIFIED SAMPLE AND SCH.NO.CQA(T&C)/TC-15/8(d). NOTE: A) CUT COMPONENTS & GARNITURE WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FABRICATION OF SHORTS COTTON LIGHT OG

FABRICATION OF SHORTS COTTON LIGHT OG SWO PART II No.60215 SPECIFICATION: 1) DIMENSION : AS PER SPECN NO. PROV/OCFAV/GARMENT/005 2) CERTIFIED SAMPLE : AS PER APPROVED SAMPLE. NOTE: A) CUT COMPONENTS & GARNITURES WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

Fabrication of Coat ECC

FABRICATION OF COAT EXTREME COLD CLIMATE SWO PART II No.60231 SPECIFICATION No. IND/TC/4587(C) NOTE: A) CUT COMPONENTS & GARNITURES WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FORGING FOR SUN GEAR TO DRG. NO. FG 765-15-5-3

FORGING FOR SUN GEAR TO DRG. NO. FG 765-15-5-3

DRG. NO. FG 765-15-5-3

DISC SPRING FOR T-90/ARTICLE 2A46M TO DRG.NO. 2A20-21-72

DISC SPRING FOR T-90/ARTICLE 2A46M TO DRG.NO. 2A20-21-72

DRG.NO. 2A20-21-72

GEAR SET MATCHED TO DRG. NO. 675-54-SB120SB

GEAR SET MATCHED TO DRG. NO. 675-54-SB120SB

675-54-SB-120SB

29P 0020*2

29P 0020*2

Drg. No.OFT / TEND R-6542-001*9

Drg. No.OFT / TEND R-6542-001*9

BUSHING TO DRG NO 765-54-71

BUSHING TO DRG NO 765-54-71

765-54-71

BUSHING TO DRG NO. 675-54-186

BUSHING TO DRG NO. 675-54-186

675-54-86

PLANET PINION (FORGING) TO DRG NO. 172-47-005/F

PLANET PINION (FORGING) TO DRG NO. 172-47-005/F

172-47-005/F