BAND FORE SIGHT TO DRG. NO.29 P 0002* required for 0.315" Sporting Rifle

AS PER DRG. NO.29 P 0002* required for 0.315" Sporting Rifle

29 P 0002*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

WASHER SPRING BAND INNER TO DRG.NO.: 29P 0067* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0067* required for 0.315" Sporting Rifle

29P 0067*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

COLLER TO DRG. No.: 29P 0035 required for 0.315" Sporting Rifle

AS PER DRG. No.: 29P 0035 required for 0.315" Sporting Rifle

29P 0035

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN CATCH MAGAZINE TO DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle

29P 0047*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

TAPE ADHESIVE WATER PROOF FABRIC 50 +/- 2 MM WIDE IN ROLL TO SPECN : IND/ME/790 (b): 2013 DC NO. 5266-ME DT 24/06/14.

TAPE ADHESIVE WATER PROOF FABRIC 50 +/- 2 MM WIDE IN ROLL TO SPECN : IND/ME/790 (b): 2013 DC NO. 5266-ME DT 24/06/14.

TAPE ADHESIVE WATER PROOF FABRIC 50 +/- 2 MM WIDE IN ROLL TO SPECN : IND/ME/790 (b): 2013 DC NO. 5266-ME DT 24/06/14.

BOLT STOCK WITH WASHERS AS ONE SET CONSISTING:- BOLT STOCK TO DRG.NO.29P 0043*(SP-43 )=10 NOS WASHER BOLT STOCK TO DRG.NO.29P 0066(SP-66)=11 NOS WASHER SPRING BOLT STOCK TO DRG.NO.29P 0069(SP-69)=11 NOS required for 0.315" Sporting Rifle

AS PER DRG

29P 0043*, 29P 0066, 29P 0069

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW EXTRACTOR 29P 0021* required for 0.315" Sporting Rifle

AS PER Drg. No. 29P 0021* required for 0.315" Sporting Rifle

29P 0021*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BED BACKSIGHT ASSEMBLY CONSISTING OF PARTS BED BACKSIGHT (29 P 0007)LEAF BED BACK SIGHT 300 YARDS (29 P 0010) AND PINLEAF BED BACK SIGHT (29 P 0011) required for 0.315" Sporting Rifle

AS PER DRG CONSISTING OF PARTS BED BACKSIGHT (29 P 0007)LEAF BED BACK SIGHT 300 YARDS (29 P 0010) AND PINLEAF BED BACK SIGHT (29 P 0011) required for 0.315" Sporting Rifle

29P 0007, 29P 0010, 29P 0011

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

HEAD BREECH BOLT TO DRG. NO.TEND.2045 required for 0.315" Sporting Rifle

AS PER DRG. NO.TEND.2045 required for 0.315" Sporting Rifle

TEND 2045

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SET CONSIST OF 3 COMPT.1)GASKET TO DRG NO.4-26941-014 DC NO 36761-A DT 1/6/01.2)GASKET TO DRG.NO 4-26941-016 DC NO.36761A DT 1/6/01.3)SEALING RING TO DRG NO 4-26941-009 DC NO 36761A DT1/6/01.MATERIAL FOR ABOVE ITEM 1-3,SPCEN:IND/ME/914(PROV)DC NO 3496-ME DT.6/2/98 GR.D OR E HARDNESS 70 TO 80 DEGREE.

SET CONSIST OF 3 COMPT.1)GASKET TO DRG NO.4-26941-014 DC NO 36761-A DT 1/6/01.2)GASKET TO DRG.NO 4-26941-016 DC NO.36761A DT 1/6/01.3)SEALING RING TO DRG NO 4-26941-009 DC NO 36761A DT1/6/01.MATERIAL FOR ABOVE ITEM 1-3,SPCEN:IND/ME/914(PROV)DC NO 3496-ME DT.6/2/98 GR.D OR E HARDNESS 70 TO 80 DEGREE.

SET CONSIST OF 3 COMPT.1)GASKET TO DRG NO.4-26941-014 DC NO 36761-A DT 1/6/01.2)GASKET TO DRG.NO 4-26941-016 DC NO.36761A DT 1/6/01.3)SEALING RING TO DRG NO 4-26941-009 DC NO 36761A DT1/6/01.MATERIAL FOR ABOVE ITEM 1-3,SPCEN:IND/ME/914(PROV)DC NO 349

SET OF 14 COMPONENTS ( 81 MM SMOKE GRENADE EMPTY COMPONENTS)WITH DISC PERFORATED & DELAY ELEMENT(DETAILS AS PER ENCLOSEDLIST.)LOT SIZE - 2050 SET

SET OF 14 COMPONENTS ( 81 MM SMOKE GRENADE EMPTY COMPONENTS)WITH DISC PERFORATED & DELAY ELEMENT(DETAILS AS PER ENCLOSEDLIST.)LOT SIZE - 2050 SET

SET OF 14 COMPONENTS ( 81 MM SMOKE GRENADE EMPTY COMPONENTS)WITH DISC PERFORATED & DELAY ELEMENT(DETAILS AS PER ENCLOSEDLIST.)LOT SIZE - 2050 SET

• uploaded soon

• uploaded soon

COMPLETE MAGAZINE ASSEMBLY TO DRG. NO.29 P 0411* CONSISTING OF CASE MAGAZINE SUB-ASSEMBLY 29 P 0460 SPRING PLOTFORM & RETAINER SUB-ASSEMBLY 29 P 0440 AND SPRING AUXILARY MAGAZINE 29 P 0028 required for 0.315" Sporting Rifle

AS PER DRG

29P 0028, 29P 0411*, 29P 0460, 29P 0440

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING EXTRACTOR TO DRG.No.: 29P 0019* required for 0.315" Sporting Rifle

AS PER DRG.No.: 29P 0019* required for 0.315" Sporting Rifle

29P 0019*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLUG (LAUNCHER PAD) TO DRG NO. 902-01-401 DC-17988-W DT. 20-06-1994. MATERIAL: ACRYLONITRILE BUTADIENE RUBBERCOMPOUND TO SPECN.:-IND/ME/914(PROV) DC-3496-ME DT.06-02-98GRADE 'C' OR 'D' HARDNESS 55 TO 70.

PLUG (LAUNCHER PAD) TO DRG NO. 902-01-401 DC-17988-W DT. 20-06-1994. MATERIAL: ACRYLONITRILE BUTADIENE RUBBERCOMPOUND TO SPECN.:-IND/ME/914(PROV) DC-3496-ME DT.06-02-98GRADE 'C' OR 'D' HARDNESS 55 TO 70.

PLUG (LAUNCHER PAD) TO DRG NO. 902-01-401 DC-17988-W DT. 20-06-1994. MATERIAL: ACRYLONITRILE BUTADIENE RUBBERCOMPOUND TO SPECN.:-IND/ME/914(PROV) DC-3496-ME DT.06-02-98GRADE 'C' OR 'D' HARDNESS 55 TO 70.

CATCH SAFETY TO DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle

29P 0046*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW CAP SLING FRONT TO DRG. NO: 29P 0053*3 required for 0.315" Sporting Rifle

AS PER DRG. NO: 29P 0053*3 required for 0.315" Sporting Rifle

29P 0053*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

EXTRACTOR TO DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle

29P 0020*2

'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.

'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.

'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.

TAPE ADHESIVE WATER PROOF FABRIC 38+/-2 MM WIDE IN ROLL TO SPECN:- IND/ME/790(b)2013 DC NO.5266-ME DT.24/06/14.

TAPE ADHESIVE WATER PROOF FABRIC 38+/-2 MM WIDE IN ROLL TO SPECN:- IND/ME/790(b)2013 DC NO.5266-ME DT.24/06/14.

TAPE ADHESIVE WATER PROOF FABRIC 38+/-2 MM WIDE IN ROLL TO SPECN:- IND/ME/790(b)2013 DC NO.5266-ME DT.24/06/14.

SEALING RING TO DRG NO-F1301-061431-A DC NO.35057-A DATE : 22/3/91

SEALING RING TO DRG NO-F1301-061431-A DC NO.35057-A DATE : 22/3/91

SEALING RING TO DRG NO-F1301-061431-A DC NO.35057-A DATE : 22/3/91

SUPPLY OF PACKING BOX AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL

AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL

K 9024

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

RUBBER HOOD TO DRG. NO. F-1301-078691-C DC NO. 35131-A DATE 5/7/91. MATERIAL SPECN:-IND/ME/884:2015 CLASS-C 60 BSRUBBER HARDNESS DEGREE 60 +5/-4 DC 5403 -ME DT.01-02-2016

RUBBER HOOD TO DRG. NO. F-1301-078691-C DC NO. 35131-A DATE 5/7/91. MATERIAL SPECN:-IND/ME/884:2015 CLASS-C 60 BSRUBBER HARDNESS DEGREE 60 +5/-4 DC 5403 -ME DT.01-02-2016

RUBBER HOOD TO DRG. NO. F-1301-078691-C DC NO. 35131-A DATE 5/7/91. MATERIAL SPECN:-IND/ME/884:2015 CLASS-C 60 BSRUBBER HARDNESS DEGREE 60 +5/-4 DC 5403 -ME DT.01-02-2016

CARD BOARD PACKING CASE AS PER TEND DRG 1834* TO HOLD SINGLE RIFLE .(REQD FOR 0.315 SPORTING RIFLE).

AS PER TEND DRG 1834* TO HOLD SINGLE RIFLE .(REQD FOR 0.315 SPORTING RIFLE).

TEND 1834*

PACKING BOX-CPP HOLLOW CORRUGATED BOX (CAPACITY 5 RIFLES) TO DRG. No. RFI SK 6431*3 required for 0.315" Sporting Rifle

AS PER DRG. No. RFI SK 6431*3 required for 0.315" Sporting Rifle

RFI SK 6431*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PACKING BOX-CPP HOLLOW CORRUGATED BOX (CAPACITY 10 RIFLES)TO DRG.No.RFI.SK.6430*3 required for 0.315" Sporting Rifle

AS PER DRG.No.RFI.SK.6430*3 required for 0.315" Sporting Rifle

RFI.SK.6430*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

"O"RING DIA 61X2 TO DRG NO-F1301-055320-C DC NO 36783-A DT.19/9/01 TO SPECN-AQL-TABLE F1301-903210C DT 15/12/77MATERIAL SPECN-VULCANISED CHLROPRENE RUBBER COMPOUND TOSPECN-IND/ME/884:2015 COMPOUND NO C-60 HARDNESS DEGREE BS-60+5/-4 COMPATIBLE WITH RDX/TNT DC.NO.5403-ME DT.1-02-2016

"O"RING DIA 61X2 TO DRG NO-F1301-055320-C DC NO 36783-A DT.19/9/01 TO SPECN-AQL-TABLE F1301-903210C DT 15/12/77MATERIAL SPECN-VULCANISED CHLROPRENE RUBBER COMPOUND TOSPECN-IND/ME/884:2015 COMPOUND NO C-60 HARDNESS DEGREE BS-60+5/-4 COMPATIBLE WITH RDX/TNT DC.NO.5403-ME DT.1-02-2016

"O"RING DIA 61X2 TO DRG NO-F1301-055320-C DC NO 36783-A DT.19/9/01 TO SPECN-AQL-TABLE F1301-903210C DT 15/12/77MATERIAL SPECN-VULCANISED CHLROPRENE RUBBER COMPOUND TOSPECN-IND/ME/884:2015 COMPOUND NO C-60 HARDNESS DEGREE BS-60+5/-4 COMPATIBLE WITH RD

CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91.

CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91.

CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91.

SCREW CAP SLING REAR TO DRG.NO.29P 0054*3 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0054*3 required for 0.315" Sporting Rifle

29P 0054*3

BOLT LOCKING TO DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle

29P 0042*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW EJECTOR TO DRG. NO.29P 0052 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0052 required for 0.315" Sporting Rifle

29P 0052

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SEAR TO DRG NO.29P 0060*2 required for 0.315" Sporting Rifle

AS PER DRG NO.29P 0060*2 required for 0.315" Sporting Rifle

29P 0060*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

WASHER SPRING BOLT LOCKING TO DRG.NO. 29P 0068* required for 0.315" Sporting Rifle

AS PER DRG.NO. 29P 0068* required for 0.315" Sporting Rifle

29P 0068*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING BOLT LOCKING TO DRG.NO.29P 0062* required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0062* required for 0.315" Sporting Rifle

29P 0062*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW SPRING BOLT LOCKING TO DRG.NO : 29P 0057*2 required for 0.315" Sporting Rifle

DRG.NO : 29P 0057*2 required for 0.315" Sporting Rifle

29P 0057*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PROTECTOR TO DRG.NO. 29P 0050* required for 0.315" Sporting Rifle

AS PER DRG.NO. 29P 0050* required for 0.315" Sporting Rifle

29P 0050*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:-F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:-F1301-902230-C (CQA-4904) DC(I) 33419-A(NEOPRENE) RUBBER SPECN:-IND/ME/884:2015 COMPOUND NO C-70+/- 5/4 DC NO.5403-ME DT.01/02/2016.

BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:-F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:-F1301-902230-C (CQA-4904) DC(I) 33419-A(NEOPRENE) RUBBER SPECN:-IND/ME/884:2015 COMPOUND NO C-70+/- 5/4 DC NO.5403-ME DT.01/02/2016.

BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:-F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:-F1301-902230-C (CQA-4904) DC(I) 33419-A(NEOPRENE) RUBBER

COCKING PIECE TO DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle

29P 0016*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PAD SLING TO DRG.NO.29P 0037 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0037 required for 0.315" Sporting Rifle

29P 0037

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CATCH MAGAZINE TO DRG.NO: 29P 0045* required for 0.315" Sporting Rifle

AS PER DRG.NO: 29P 0045* required for 0.315" Sporting Rifle

29P 0045*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

"O"RING GASKET DIA 68.6+/-0.4 X 2.2+/-0.1 MM DIA TO DRG NO. F-1301-024240-B DC NO. 36345-A DT 29/10/97MATERIAL SPECN:- IND/ME/884:2015 COMPOUND NO C-5 WITHHARDNESS DEGREE BS-70-75 DC-NO.5403-ME DT 1-02-2016

"O"RING GASKET DIA 68.6+/-0.4 X 2.2+/-0.1 MM DIA TO DRG NO. F-1301-024240-B DC NO. 36345-A DT 29/10/97MATERIAL SPECN:- IND/ME/884:2015 COMPOUND NO C-5 WITHHARDNESS DEGREE BS-70-75 DC-NO.5403-ME DT 1-02-2016

"O"RING GASKET DIA 68.6+/-0.4 X 2.2+/-0.1 MM DIA TO DRG NO. F-1301-024240-B DC NO. 36345-A DT 29/10/97MATERIAL SPECN:- IND/ME/884:2015 COMPOUND NO C-5 WITHHARDNESS DEGREE BS-70-75 DC-NO.5403-ME DT 1-02-2016

PIN COCKING ARM TO DRG NO. 32P 4103*2 (FULLY FINISHED) WITH FIRM'S MATERIAL FOR 40MM UBGL

AS PER DRAWING

32P 4103*2

SCREW AXIS FORE SIGHT TO DRG.NO.32P 1306*(FULLY FINISHED)WITH FIRM'S MATERIAL FOR 40MM UBGL.

AS PER DRAWING

32P 1306*

ALUMINIUM(DISC)COVER THICKNESS= 0.05 MM ,DIA = 10MM.TO DRG. NO. F1334-154820 B DC-35529-A DT.14/08/93.

ALUMINIUM(DISC)COVER THICKNESS= 0.05 MM ,DIA = 10MM.TO DRG. NO. F1334-154820 B DC-35529-A DT.14/08/93.

ALUMINIUM(DISC)COVER THICKNESS= 0.05 MM ,DIA = 10MM.TO DRG. NO. F1334-154820 B DC-35529-A DT.14/08/93.

MFG & SUPPLY OF LEAF SPRING COCKING ARM TO DRG.NO.32P 4102 WITH FIRM'S MATERIAL FOR UBGL

AS PER DRAWING

32P 4102

MFG & SUPPLY OF LEVER LOCKING PIN TO DRG.NO 32P 4713 (M) WITH FIRM'S MATERIAL FOR UBGL

AS PER DRAWING

32P 4713 (M)

SCREW HOUSING LADDER SIGHT TO DRG NO.32P 1030*4 (FULL FINISHD) WITH FIRM'S MATERIAL FOR 40MM UBGL

AS PER DRAWING

32P 1030*4

SUPPLY OF GUIDE RECOIL SPRING DRG.NO.32P 2102*2 FULLY FINISHED CONDITION WITH FIRM'S MATERIAL FOR UBGL

AS PER DRAWING

32P 2102*2

NUT LOCK FORESIGHT TO DRG.NO.32P 1311*3 FOR 40MM UBGL WITH FIRM'S MATERIAL

AS PER DRAWING

32P 1311*3

TAPE ADHESIVE WATER PROOF FABRIC 12.7 +/-0.5 MM WIDE IN ROLLTO SPECN : IND/ME/790(b)2013 DC NO. 5266-ME DATE 24/06/2014.

TAPE ADHESIVE WATER PROOF FABRIC 12.7 +/-0.5 MM WIDE IN ROLLTO SPECN : IND/ME/790(b)2013 DC NO. 5266-ME DATE 24/06/2014.

TAPE ADHESIVE WATER PROOF FABRIC 12.7 +/-0.5 MM WIDE IN ROLLTO SPECN : IND/ME/790(b)2013 DC NO. 5266-ME DATE 24/06/2014.

FORE SIGHT D.S.CAT.No.: 1005-001540, D.C.No.:26763-SA DT:23/06/2015 FOR D.C.No. LATEST TO BE FOLLOWED.

AS PER D.S.CAT.No.: 1005-001540, D.C.No.:26763-SA DT:23/06/2015 FOR D.C.No. LATEST TO BE FOLLOWED.

D.S.CAT.No.: 1005-001540, D.C.No.:26763-SA DT:23/06/2015

SEMI FINISHED BLANK PIN FOR EJECTOR & SEAR FOR 40MM UBGL TO DRG NO. TEND 2190 WITH FIRM'S MATERIAL

AS PER DRAWING

TEND 2190

SEMI FINISHED BLANK PIN EXTRACTOR FOR 40MM UBGL TO DRG.NO. TEND 2192 WITH FIRM'S MATERIAL

AS PER DRAWING

TEND 2192

SEMI FINISHED BLANK PIN CATCH FOR 40MM UBGL TO DRG NO. TEND 2191 WITH FIRM'S MATERIAL

AS PER DRAWING

TEND 2191

SEMI FINISHED BLANK PIN LEVER TRIGGER AND PIN FIRING FOR 40MM UBGL TO DRG NO. TEND 2193 WITH FIRM'MATERIAL

AS PER DRAWING

TEND 2193

32P 1025 GUIDE SPRING PIN FIRING

AS PER DRG NO.32P 1025

32P 1025

STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

MFG & SUPPLY OF SPRING LEVER LOCKING BARREL TO DRG NO.32P1008*5 FULLY FINISHED WITH FIRM'S MATERIAL REQUIRED FOR 40MM UBGL

AS PER DRG NO.32P1008*5

32P1008*5

DRIFT TO DIA 2.4 X 35 MM TO DRG NO 32P 5002. REQD FOR UBGL

AS PER DRG NO 32P 5002. REQD FOR UBGL

32P 5002

DRIFT DIA 4 X 60MM TO DRG NO 32P 5003. REQD FOR UBGL.

AS PER DRAWING NO 32P 5003. REQD FOR UBGL

32P 5003

TRACER BODY TO DRG NO.F-1334-154780-D, DC-36534-A DT.6/3/99

TRACER BODY TO DRG NO.F-1334-154780-D, DC-36534-A DT.6/3/99

TRACER BODY TO DRG NO.F-1334-154780-D, DC-36534-A DT.6/3/99

OVER MOULDING HOUSING SIGHT ASSY AS PER DRG.NO. TEND 2363 REQUIRED FOR 40mm UBGL. (Component will be supplied by OFT on which moulding at both ends have to be carried out by firm) firm)

AS PER DRG.NO. TEND 2363

TEND 2363

STEEL ROUND ISRO 200 OF 40NI6CR4MO3 TO IS:5517

STEEL ROUND ISRO 200 OF 40NI6CR4MO3 TO IS:5517

STEEL ROUND ISRO 200 OF 40NI6CR4MO3 TO IS:5517

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

CQA (T&C)/TEFSGAR/TC-6

CQA (T&C)/TEFSGAR/TC-6

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

Self Adhesive cellophone PVC tape

JSS:8046-6 & SS No. CIGS/SS/126(a)

BOTTLE OIL MK-V, DS CAT.NO.1005-000323,1005-000324, 1005-000326,1005-000327,1005-000328, DC.NO.23296 SA-DT:21/03/96. FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.

AS PER DS CAT.NO.1005-000323,1005-000324, 1005-000326,1005-000327,1005-000328, DC.NO.23296 SA-DT:21/03/96. FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.

DS CAT.NO.1005-000323,1005-000324, 1005-000326,1005-000327,1005-000328, DC.NO.23296

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247.

VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247.

VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247.

PULL THROUGH 1A(NYLON) AS PER DS CAT NO.1005-001760 FOR DC NO. 22520-SA DATED 2.5.94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7.62mm 1A1

AS PER DS CAT NO.1005-001760 FOR DC NO. 22520-SA DATED 2.5.94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7.62mm 1A1

DS CAT NO.1005-001760 FOR DC NO. 22520-SA DATED 2.5.94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7.62mm 1A1

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

GRIP PISTOL ASSEMBLY (PLASTIC) (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,

AS PER DRG (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,

(ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,

GUARD HAND LEFT & RIGHT ASSY. (PLASTIC) No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,

AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,

DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,1005-005449,5305-005009,1005-004027,Tend-1911 Ref: New DC.

BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,1005-005449,5305-005009,1005-004027,Tend-1911 Ref: New DC.

D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,1005-005449,5305-005009,1005-004027,Tend-1911 Ref: New DC

• As per Drawing

• As per Drawing

TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155.

TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155.

TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155.

SECONDARY COMBUSTIBLE CARTG CASE SET OF 3 COMPONENTS:-1)COM-BUSTIBLE SLEEVE FOR FRONT CARTG TO DRG PT NO ISX-412, DC NO-36698-A DT 14/8/2K (2)COMBUSTIBLE CAP FOR FRONT CARTG TO DRGPT.NO.ISX-413 DC 36698-A DT 14/8/2K (3)COMBUSTIBLE BODY FORFRONT CARTG TO DRG PT NO ISX-414 DC NO 36778-A DT 30/8/01.

SECONDARY COMBUSTIBLE CARTG CASE SET OF 3 COMPONENTS:-1)COM-BUSTIBLE SLEEVE FOR FRONT CARTG TO DRG PT NO ISX-412, DC NO-36698-A DT 14/8/2K (2)COMBUSTIBLE CAP FOR FRONT CARTG TO DRGPT.NO.ISX-413 DC 36698-A DT 14/8/2K (3)COMBUSTIBLE BODY FORFRONT CARTG TO DRG PT NO ISX-414 DC NO 36778-A DT 30/8/01.

SECONDARY COMBUSTIBLE CARTG CASE SET OF 3 COMPONENTS:-1)COM-BUSTIBLE SLEEVE FOR FRONT CARTG TO DRG PT NO ISX-412, DC NO-36698-A DT 14/8/2K (2)COMBUSTIBLE CAP FOR FRONT CARTG TO DRGPT.NO.ISX-413 DC 36698-A DT 14/8/2K (3)COMBUSTIBLE BODY FORFRONT CARTG

SUPPORTING RING TO DRG.NO.TRD-2-2-2272.

SUPPORTING RING TO DRG.NO.TRD-2-2-2272.

SUPPORTING RING TO DRG.NO.TRD-2-2-2272.

SPRING WASHER TO DRG.NO.TRD-1-2-2267.

SPRING WASHER TO DRG.NO.TRD-1-2-2267.

SPRING WASHER TO DRG.NO.TRD-1-2-2267.

SPRING TO DRG NO.301100269.

SPRING TO DRG NO.301100269.

SPRING TO DRG NO.301100269.

SPACER TO DRG.NO.TRD-2-2-2273.

SPACER TO DRG.NO.TRD-2-2-2273.

SPACER TO DRG.NO.TRD-2-2-2273.

SLOTTED CHEESE HEADSCREW M 2.5*5 TO DRG.NO.TRD-1-2-2265.

SLOTTED CHEESE HEADSCREW M 2.5*5 TO DRG.NO.TRD-1-2-2265.

SLOTTED CHEESE HEADSCREW M 2.5*5 TO DRG.NO.TRD-1-2-2265.

SLIDING RING TO DRG.NO.TRD-1-2-2264

SLIDING RING TO DRG.NO.TRD-1-2-2264

SLIDING RING TO DRG.NO.TRD-1-2-2264